parisc: Convert to generic clockevents

Convert parisc timer code to generic clockevents framework.

Signed-off-by: Helge Deller <[email protected]>

parisc: fix mmap_base calculation when stack grows upwards

Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd430768 ("parisc: Use gener

parisc: fix mmap_base calculation when stack grows upwards

Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd430768 ("parisc: Use generic mmap top-down
layout and brk randomization").

That commit switched parisc to use the common infrastructure to calculate
mmap_base, but missed that the mmap_base() function takes care for
architectures where the stack grows downwards only.

Fix the mmap_base() calculation to include the stack-grows-upwards case
and thus fix the userspace crashes on parisc.

Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100
Fixes: 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization")
Signed-off-by: Helge Deller <[email protected]>
Reported-by: matoro <[email protected]>
Tested-by: matoro <[email protected]>
Cc: <[email protected]> [6.6+]
Signed-off-by: Andrew Morton <[email protected]>

show more ...

parisc: Move parisc_narrow_firmware variable to header file

Signed-off-by: Helge Deller <[email protected]>

parisc: BTLB: Initialize BTLB tables at CPU startup

Initialize the BTLB entries when starting up a CPU.
Note that BTLBs are not available on 64-bit CPUs.

Signed-off-by: Helge Deller <[email protected]>

parisc: iosapic: Convert I/O Sapic driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: sba_iommu: Convert SBA IOMMU driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: lba: Convert LBA PCI bus driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: gsc: Convert GSC bus driver to use arch_initcall()

This conversion includes LASI, ASP and WAX drivers for now.

Signed-off-by: Helge Deller <[email protected]>

parisc: ccio: Convert CCIO driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: eisa: Convert HP EISA bus driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: hppb: Convert HP PB bus driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: dino: Convert dino PCI bus driver to use arch_initcall()

Signed-off-by: Helge Deller <[email protected]>

parisc: unwind: Avoid missing prototype warning for handle_interruption()

Signed-off-by: Helge Deller <[email protected]>

parisc: smp: Add declaration for start_cpu_itimer()

Avoid gcc warning about missing prototype for start_cpu_itimer().

Signed-off-by: Helge Deller <[email protected]>

parisc: irq: Add irq-related function declarations

Move function declarations for do_cpu_irq_mask(), timer_interrupt() and
ipi_interrupt() to header file.

Signed-off-by: Helge Deller <[email protected]>

parisc: Move init function declarations into header file

Clean up the code to not have external function declarations
inside the C source files. Reduces warnings when compiled with W=1.

Signed-off-

parisc: Move init function declarations into header file

Clean up the code to not have external function declarations
inside the C source files. Reduces warnings when compiled with W=1.

Signed-off-by: Helge Deller <[email protected]>

show more ...

kernel: exit: cleanup release_thread()

Only x86 has own release_thread(), introduce a new weak release_thread()
function to clean empty definitions in other ARCHs.

Link: https://lkml.kernel.org/r/2

kernel: exit: cleanup release_thread()

Only x86 has own release_thread(), introduce a new weak release_thread()
function to clean empty definitions in other ARCHs.

Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Acked-by: Guo Ren <[email protected]> [csky]
Acked-by: Russell King (Oracle) <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Brian Cain <[email protected]>
Acked-by: Michael Ellerman <[email protected]> [powerpc]
Acked-by: Stafford Horne <[email protected]> [openrisc]
Acked-by: Catalin Marinas <[email protected]> [arm64]
Acked-by: Huacai Chen <[email protected]> [LoongArch]
Cc: Alexander Gordeev <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Guo Ren <[email protected]> [csky]
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Xuerui Wang <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>

show more ...

parisc: Find a new timesync master if current CPU is removed

When CPU hotplugging is enabled, the user may want to remove the
current CPU which is providing the timer ticks. If this happens
we need

parisc: Find a new timesync master if current CPU is removed

When CPU hotplugging is enabled, the user may want to remove the
current CPU which is providing the timer ticks. If this happens
we need to find a new timesync master.

Signed-off-by: Helge Deller <[email protected]>

show more ...

parisc: Add vDSO support

Add minimal vDSO support, which provides the signal trampoline helpers,
but none of the userspace syscall helpers like time wrappers.

The big benefit of this vDSO implement

parisc: Add vDSO support

Add minimal vDSO support, which provides the signal trampoline helpers,
but none of the userspace syscall helpers like time wrappers.

The big benefit of this vDSO implementation is, that we now don't need
an executeable stack any longer. PA-RISC is one of the last
architectures where an executeable stack was needed in oder to implement
the signal trampolines by putting assembly instructions on the stack
which then gets executed. Instead the kernel will provide the relevant
code in the vDSO page and only put the pointers to the signal
information on the stack.

By dropping the need for executable stacks we avoid running into issues
with applications which want non executable stacks for security reasons.
Additionally, alternative stacks on memory areas without exec
permissions are supported too.

This code is based on an initial implementation by Randolph Chung from 2006:
https://lore.kernel.org/linux-parisc/[email protected]/

I did the porting and lifted the code to current code base. Dave fixed
the unwind code so that gdb and glibc are able to backtrace through the
code. An additional patch to gdb will be pushed upstream by Dave.

Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Dave Anglin <[email protected]>
Cc: Randolph Chung <[email protected]>
Signed-off-by: Helge Deller <[email protected]>

show more ...

parisc: Fix missing prototype for 'toc_intr' warning in toc.c

Fix a missing prototype warning noticed by the kernel test robot.

Reported-by: kernel test robot <[email protected]>
Signed-off-by: Helge D

parisc: Fix missing prototype for 'toc_intr' warning in toc.c

Fix a missing prototype warning noticed by the kernel test robot.

Reported-by: kernel test robot <[email protected]>
Signed-off-by: Helge Deller <[email protected]>

show more ...

parisc: Drop ifdef __KERNEL__ from non-uapi kernel headers

Signed-off-by: Helge Deller <[email protected]>

parisc: Move thread_info into task struct

This implements the CONFIG_THREAD_INFO_IN_TASK option.

With this change:
- before thread_info was part of the stack and located at the beginning of the sta

parisc: Move thread_info into task struct

This implements the CONFIG_THREAD_INFO_IN_TASK option.

With this change:
- before thread_info was part of the stack and located at the beginning of the stack
- now the thread_info struct is moved and located inside the task_struct structure
- the stack is allocated and handled like the major other platforms
- drop the cpu field of thread_info and use instead the one in task_struct

Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>

show more ...

parisc: add support for TOC (transfer of control)

Almost all PA-RISC machines have either a button that
is labeled with 'TOC' or a BMC function to trigger a TOC.
TOC is a non-maskable interrupt that

parisc: add support for TOC (transfer of control)

Almost all PA-RISC machines have either a button that
is labeled with 'TOC' or a BMC function to trigger a TOC.
TOC is a non-maskable interrupt that is sent to the processor.
This can be used for diagnostic purposes like obtaining a
stack trace/register dump or to enter KDB/KGDB.

As an example, on my c8000, TOC can be used with:

CONFIG_KGDB=y
CONFIG_KGDB_KDB=y

and the 'kgdboc=ttyS0,115200' appended to the command line.

Press ^[( on serial console, which will enter the BMC command line,
and enter 'TOC s':

root@(none):/# (
cli>TOC s
Sending TOC/INIT.
<Cpu3> 2800035d03e00000 0000000040c21ac8 CC_ERR_CHECK_TOC
<Cpu0> 2800035d00e00000 0000000040c21ad0 CC_ERR_CHECK_TOC
<Cpu2> 2800035d02e00000 0000000040c21ac8 CC_ERR_CHECK_TOC
<Cpu1> 2800035d01e00000 0000000040c21ad0 CC_ERR_CHECK_TOC
<Cpu3> 37000f7303e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY
<Cpu0> 37000f7300e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY
<Cpu2> 37000f7302e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY
<Cpu1> 37000f7301e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY
<Cpu3> 4300100803e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC
<Cpu0> 4300100800e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC
<Cpu2> 4300100802e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC
<Cpu1> 4300100801e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC

Entering kdb (current=0x00000000411cef80, pid 0) on processor 0 due to NonMaskable Interrupt @ 0x40c21ad0
[0]kdb>

Signed-off-by: Sven Schnelle <[email protected]>
Signed-off-by: Helge Deller <[email protected]>

show more ...

parisc: Allocate task struct with stack frame alignment

We will put the stack directly behind the task struct, so
make sure that we allocate it with an alignment of 64 bytes.

Signed-off-by: Helge D

parisc: Allocate task struct with stack frame alignment

We will put the stack directly behind the task struct, so
make sure that we allocate it with an alignment of 64 bytes.

Signed-off-by: Helge Deller <[email protected]>

show more ...

sched: Add wrapper for get_wchan() to keep task blocked

Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zij

sched: Add wrapper for get_wchan() to keep task blocked

Having a stable wchan means the process must be blocked and for it to
stay that way while performing stack unwinding.

Suggested-by: Peter Zijlstra <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]> [arm]
Tested-by: Mark Rutland <[email protected]> [arm64]
Link: https://lkml.kernel.org/r/[email protected]

show more ...