openrisc: place exception table at the head of vmlinux

Since commit 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S

openrisc: place exception table at the head of vmlinux

Since commit 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in
text output section"), the exception table in arch/openrisc/kernel/head.S
is no longer positioned at the very beginning of the kernel image, which
causes a boot failure.

Currently, the exception table resides in the regular .text section.
Previously, it was placed at the head by relying on the linker receiving
arch/openrisc/kernel/head.o as the first object. However, this behavior
has changed because sections like .text.{asan,unknown,unlikely,hot} now
precede the regular .text section.

The .head.text section is intended for entry points requiring special
placement. However, in OpenRISC, this section has been misused: instead
of the entry points, it contains boot code meant to be discarded after
booting. This feature is typically handled by the .init.text section.

This commit addresses the issue by replacing the current __HEAD marker
with __INIT and re-annotating the entry points with __HEAD. Additionally,
it adds __REF to entry.S to suppress the following modpost warning:

WARNING: modpost: vmlinux: section mismatch in reference: _tng_kernel_start+0x70 (section: .text) -> _start (section: .init.text)

Fixes: 0043ecea2399 ("vmlinux.lds.h: Adjust symbol ordering in text output section")
Reported-by: Guenter Roeck <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/#t
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Reviewed-by: Rong Xu <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>

show more ...

objtool/idle: Validate __cpuidle code as noinstr

Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infra

objtool/idle: Validate __cpuidle code as noinstr

Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.

Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Tony Lindgren <[email protected]>
Tested-by: Ulf Hansson <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

show more ...

vmlinux.lds.h: Split ELF_DETAILS from STABS_DEBUG

The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that ne

vmlinux.lds.h: Split ELF_DETAILS from STABS_DEBUG

The .comment section doesn't belong in STABS_DEBUG. Split it out into a
new macro named ELF_DETAILS. This will gain other non-debug sections
that need to be accounted for when linking with --orphan-handling=warn.

Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

show more ...

openrisc: Add support for external initrd images

In OpenRISC we set the initrd_start and initrd_end based on the symbols
we setup in vmlinux.lds.S. However, this is not needed if we use the
generic

openrisc: Add support for external initrd images

In OpenRISC we set the initrd_start and initrd_end based on the symbols
we setup in vmlinux.lds.S. However, this is not needed if we use the
generic linker description in INIT_DATA_SECTION.

Removing our own initrd setup reduces code, but also the generic code
supports loading external initrd images. A bootloader can load a rootfs
image into memory and we can configure devicetree to load it with:

chosen {
bootargs = "earlycon";
stdout-path = "uart0:115200";
linux,initrd-start = < 0x08000100 >;
linux,initrd-end = < 0x08200000 >;
};

Reported-by: Mateusz Holenko <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>

show more ...

vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATA

Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie,
since it's multiple sections and section flags cannot be applied to
the mac

vmlinux.lds.h: Replace RW_DATA_SECTION with RW_DATA

Rename RW_DATA_SECTION to RW_DATA. (Calling this a "section" is a lie,
since it's multiple sections and section flags cannot be applied to
the macro.)

Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # s390
Acked-by: Geert Uytterhoeven <[email protected]> # m68k
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Rick Edgecombe <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATA

Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section"
is a lie, since it's multiple sections and section flags cannot be
applied t

vmlinux.lds.h: Replace RO_DATA_SECTION with RO_DATA

Finish renaming RO_DATA_SECTION to RO_DATA. (Calling this a "section"
is a lie, since it's multiple sections and section flags cannot be
applied to the macro.)

Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # s390
Acked-by: Geert Uytterhoeven <[email protected]> # m68k
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Rick Edgecombe <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

vmlinux.lds.h: Move NOTES into RO_DATA

The .notes section should be non-executable read-only data. As such,
move it to the RO_DATA macro instead of being per-architecture defined.

Signed-off-by: Ke

vmlinux.lds.h: Move NOTES into RO_DATA

The .notes section should be non-executable read-only data. As such,
move it to the RO_DATA macro instead of being per-architecture defined.

Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Heiko Carstens <[email protected]> # s390
Cc: Andy Lutomirski <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Rick Edgecombe <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

openrisc: Make THREAD_SIZE available to vmlinux.lds

Make THREAD_SIZE available to vmlinux.lds on openrisc by including
asm/thread_info.h the linker script.

This allows init_stack to be allocated in

openrisc: Make THREAD_SIZE available to vmlinux.lds

Make THREAD_SIZE available to vmlinux.lds on openrisc by including
asm/thread_info.h the linker script.

This allows init_stack to be allocated in the linker script in a subsequent
patch.

Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Acked-by: Stafford Horne <[email protected]>
cc: Jonas Bonn <[email protected]>
cc: Stefan Kristiansson <[email protected]>
cc: [email protected]

show more ...

scripts/spelling.txt: add "aligment" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

aligment||alignment

I did not touch the "N_BYTE_ALIGMENT" macro i

scripts/spelling.txt: add "aligment" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

aligment||alignment

I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.

I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif. It is surely safe and I
confirmed "_alignment_handler" is correct.

I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

openrisc: Add _text symbol to fix ksym build error

The build robot reports:

.tmp_kallsyms1.o: In function `kallsyms_relative_base':
>> (.rodata+0x8a18): undefined reference to `_text'

This is w

openrisc: Add _text symbol to fix ksym build error

The build robot reports:

.tmp_kallsyms1.o: In function `kallsyms_relative_base':
>> (.rodata+0x8a18): undefined reference to `_text'

This is when using 'make alldefconfig'. Adding this _text symbol to mark
the start of the kernel as in other architecture fixes this.

Signed-off-by: Stafford Horne <[email protected]>
Acked-by: Jonas Bonn <[email protected]>

show more ...

openrisc: Support both old (or32) and new (or1k) toolchain

The output file format for or1k has changed from "elf32-or32"
to "elf32-or1k". Select the correct output format automatically
to be able to

openrisc: Support both old (or32) and new (or1k) toolchain

The output file format for or1k has changed from "elf32-or32"
to "elf32-or1k". Select the correct output format automatically
to be able to compile the kernel with both toolchain variants.

Signed-off-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Signed-off-by: Stafford Horne <[email protected]>

show more ...

nmi_backtrace: generate one-line reports for idle cpus

When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messag

nmi_backtrace: generate one-line reports for idle cpus

When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".

We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.

This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Chris Metcalf <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Daniel Thompson <[email protected]> [arm]
Tested-by: Petr Mladek <[email protected]>
Cc: Aaron Tomlin <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Russell King <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections

KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point

arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections

KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.

Move the definition of __irq_entry to <linux/interrupt.h> so that the
users don't need to pull in <linux/ftrace.h>. Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.

Signed-off-by: Alexander Potapenko <[email protected]>
Acked-by: Steven Rostedt <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

OpenRISC: Build infrastructure

Signed-off-by: Jonas Bonn <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>