of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify

__pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64

of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify

__pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().

Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.

Reported-by: Breno Leitao <[email protected]>
Suggested-by: Mark Rutland <[email protected]>
Signed-off-by: Usama Arif <[email protected]>
Fixes: ac10be5cdbfa ("arm64: Use common of_kexec_alloc_and_setup_fdt()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>

show more ...

mips: Set dump-stack arch description

In the framework of the MIPS architecture the mips_set_machine_name()
method is defined to set the machine name. The name currently is only used
in the /proc/cp

mips: Set dump-stack arch description

In the framework of the MIPS architecture the mips_set_machine_name()
method is defined to set the machine name. The name currently is only used
in the /proc/cpuinfo file content generation. Let's have it utilized to
mach-personalize the dump-stack data too in a way it's done on ARM, ARM64,
RISC-V, etc.

Signed-off-by: Serge Semin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by

MIPS: move from strlcpy with unused retval to strscpy

Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: Remove redundant definitions of device_tree_init()

There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up th

MIPS: Remove redundant definitions of device_tree_init()

There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up the related code.

Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: replace add_memory_region with memblock

add_memory_region was the old interface for registering memory and
was already changed to used memblock internaly. Replace it by
directly calling memblo

MIPS: replace add_memory_region with memblock

add_memory_region was the old interface for registering memory and
was already changed to used memblock internaly. Replace it by
directly calling memblock functions.

Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

Based on 2 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

mips: Make sure dt memory regions are valid

There are situations when memory regions coming from dts may be
too big for the platform physical address space. This especially
concerns XPA-capable syst

mips: Make sure dt memory regions are valid

There are situations when memory regions coming from dts may be
too big for the platform physical address space. This especially
concerns XPA-capable systems. Bootloader may determine more than 4GB
memory available and pass it to the kernel over dts memory node, while
kernel is built without XPA/64BIT support. In this case the region
may either simply be truncated by add_memory_region() method
or by u64->phys_addr_t type casting. But in worst case the method
can even drop the memory region if it exceeds PHYS_ADDR_MAX size.
So lets make sure the retrieved from dts memory regions are valid,
and if some of them aren't, just manually truncate them with a warning
printed out.

Signed-off-by: Serge Semin <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: [email protected]
Cc: [email protected]

show more ...

mips: Add reserve-nomap memory type support

It might be necessary to prevent the virtual mapping creation for a
requested memory region. For instance there is a "no-map" property
indicating exactly

mips: Add reserve-nomap memory type support

It might be necessary to prevent the virtual mapping creation for a
requested memory region. For instance there is a "no-map" property
indicating exactly this feature. In this case we need to not only
reserve the specified region by pretending it doesn't exist in the
memory space, but completely remove the range from system just by
removing it from memblock. The same way it's done in default
early_init_dt_reserve_memory_arch() method.

Signed-off-by: Serge Semin <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Matt Redfearn <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: [email protected]

show more ...

mm: remove include/linux/bootmem.h

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced

mm: remove include/linux/bootmem.h

Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[[email protected]: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Martin Schwidefsky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Richard Kuo <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Serge Semin <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

mips: remove arch specific early_init_dt_alloc_memory_arch

Now that the DT core code handles bootmem arches, we can remove the MIPS
specific early_init_dt_alloc_memory_arch function.

Cc: Ralf Baech

mips: remove arch specific early_init_dt_alloc_memory_arch

Now that the DT core code handles bootmem arches, we can remove the MIPS
specific early_init_dt_alloc_memory_arch function.

Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>

show more ...

MIPS: Use early_init_fdt_reserve_self to protect DTB location

early_init_fdt_reserve_self is used to tell the boot memory allocator
that a memory is occupied by the DTB, so add it in the MIPS init c

MIPS: Use early_init_fdt_reserve_self to protect DTB location

early_init_fdt_reserve_self is used to tell the boot memory allocator
that a memory is occupied by the DTB, so add it in the MIPS init code to
ensure information about the DTB is added to the boot memory array.

Signed-off-by: Marcin Nowakowski <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14610/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: Fix build with CONFIG_OF=y for non OF-enabled targets

Commit 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF")
changed the guards in asm/prom.h from CONFIG_OF to CONFIG_USE_OF, but

MIPS: Fix build with CONFIG_OF=y for non OF-enabled targets

Commit 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF")
changed the guards in asm/prom.h from CONFIG_OF to CONFIG_USE_OF, but
missed the actual function declarations in kernel/prom.c, which have
additional dependencies.

Fixes the following build error:

CC arch/mips/kernel/prom.o
arch/mips/kernel/prom.c: In function '__dt_setup_arch':
arch/mips/kernel/prom.c:54:2: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration]
if (!early_init_dt_scan(bph))
^

Fixes: 01306aeadd75 ("MIPS: prepare for user enabling of CONFIG_OF")
Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Grant Likely <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/10741/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: prepare for user enabling of CONFIG_OF

In preparation to allow users to enable DeviceTree without arch or
machine selecting it, we need to fix build errors on MIPS. When
CONFIG_OF is enabled,

MIPS: prepare for user enabling of CONFIG_OF

In preparation to allow users to enable DeviceTree without arch or
machine selecting it, we need to fix build errors on MIPS. When
CONFIG_OF is enabled, device_tree_init cannot be resolved. This is
trivially fixed by using CONFIG_USE_OF instead of CONFIG_OF for prom.h.

Signed-off-by: Rob Herring <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: prepare for user enabling of CONFIG_OF

In preparation to allow users to enable DeviceTree without arch or
machine selecting it, we need to fix build errors on MIPS. When
CONFIG_OF is enabled,

MIPS: prepare for user enabling of CONFIG_OF

In preparation to allow users to enable DeviceTree without arch or
machine selecting it, we need to fix build errors on MIPS. When
CONFIG_OF is enabled, device_tree_init cannot be resolved. This is
trivially fixed by using CONFIG_USE_OF instead of CONFIG_OF for prom.h.

Signed-off-by: Rob Herring <[email protected]>
Acked-by: Ralf Baechle <[email protected]>
Acked-by: Grant Likely <[email protected]>
Cc: [email protected]

show more ...

MIPS: Let __dt_register_buses accept a single bus type

Some machines only have one bus type to register (e.g. "simple-bus").

Signed-off-by: Kevin Cernekee <[email protected]>
Cc: f.fainelli@gmail.

MIPS: Let __dt_register_buses accept a single bus type

Some machines only have one bus type to register (e.g. "simple-bus").

Signed-off-by: Kevin Cernekee <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/8845/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: Create a helper function for DT setup

A couple of platforms register two buses and call of_platform_populate().
Move this into a common function to reduce duplication.

Signed-off-by: Kevin Ce

MIPS: Create a helper function for DT setup

A couple of platforms register two buses and call of_platform_populate().
Move this into a common function to reduce duplication.

Signed-off-by: Kevin Cernekee <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/8167/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

mips: convert fdt pointers to opaque pointers

The architecture code does not need to access the internals of the FDT
blob directly, so make the pointers to it void * and use char arrays
for section

mips: convert fdt pointers to opaque pointers

The architecture code does not need to access the internals of the FDT
blob directly, so make the pointers to it void * and use char arrays
for section variables.

Signed-off-by: Rob Herring <[email protected]>
Cc: Ralf Baechle <[email protected]>
Tested-by: Grant Likely <[email protected]>

show more ...

mips: use common of_flat_dt_get_machine_name

Convert mips to use the common of_flat_dt_get_machine_name function.

Signed-off-by: Rob Herring <[email protected]>
Cc: Ralf Baechle <ralf@linux-m

mips: use common of_flat_dt_get_machine_name

Convert mips to use the common of_flat_dt_get_machine_name function.

Signed-off-by: Rob Herring <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Acked-by: John Crispin <[email protected]>

show more ...

of: remove early_init_dt_setup_initrd_arch

All arches do essentially the same thing now for
early_init_dt_setup_initrd_arch, so it can now be removed.

Signed-off-by: Rob Herring <rob.herring@calxed

of: remove early_init_dt_setup_initrd_arch

All arches do essentially the same thing now for
early_init_dt_setup_initrd_arch, so it can now be removed.

Signed-off-by: Rob Herring <[email protected]>
Acked-by: Vineet Gupta <[email protected]>
Cc: Russell King <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Acked-by: Grant Likely <[email protected]>

show more ...

mips: use early_init_dt_scan

Convert mips to use new early_init_dt_scan function.

Remove early_init_dt_scan_memory_arch

Signed-off-by: Rob Herring <[email protected]>
Cc: Ralf Baechle <ralf@

mips: use early_init_dt_scan

Convert mips to use new early_init_dt_scan function.

Remove early_init_dt_scan_memory_arch

Signed-off-by: Rob Herring <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: [email protected]
Acked-by: John Crispin <[email protected]>

show more ...

of: Specify initrd location using 64-bit

On some PAE architectures, the entire range of physical memory could reside
outside the 32-bit limit. These systems need the ability to specify the
initrd l

of: Specify initrd location using 64-bit

On some PAE architectures, the entire range of physical memory could reside
outside the 32-bit limit. These systems need the ability to specify the
initrd location using 64-bit numbers.

This patch globally modifies the early_init_dt_setup_initrd_arch() function to
use 64-bit numbers instead of the current unsigned long.

There has been quite a bit of debate about whether to use u64 or phys_addr_t.
It was concluded to stick to u64 to be consistent with rest of the device
tree code. As summarized by Geert, "The address to load the initrd is decided
by the bootloader/user and set at that point later in time. The dtb should not
be tied to the kernel you are booting"

More details on the discussion can be found here:
https://lkml.org/lkml/2013/6/20/690
https://lkml.org/lkml/2012/9/13/544

Signed-off-by: Santosh Shilimkar <[email protected]>
Acked-by: Rob Herring <[email protected]>
Acked-by: Vineet Gupta <[email protected]>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
Signed-off-by: Grant Likely <[email protected]>

show more ...

MIPS: using strlcpy() instead of strncpy()

Ensure strings are always '\0' terminated. Or in the next pr_info() shit
may hit the fan.

Signed-off-by: Chen Gang <[email protected]>
Acked-by: John

MIPS: using strlcpy() instead of strncpy()

Ensure strings are always '\0' terminated. Or in the next pr_info() shit
may hit the fan.

Signed-off-by: Chen Gang <[email protected]>
Acked-by: John Crispin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Linux-Arch <[email protected]>
Cc: [email protected] <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/5331/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: move mips_{set,get}_machine_name() to a more generic place

Previously this functionality was only available to users of the mips_machine
api. Moving the code to prom.c allows us to also add a

MIPS: move mips_{set,get}_machine_name() to a more generic place

Previously this functionality was only available to users of the mips_machine
api. Moving the code to prom.c allows us to also add a OF wrapper.

Signed-off-by: John Crispin <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5164/

show more ...

MIPS: Prune some target specific code out of prom.c

This code is not common enough to be in a shared file. It is also not
used by any existing boards, so just remove it.

[[email protected]: Drop

MIPS: Prune some target specific code out of prom.c

This code is not common enough to be in a shared file. It is also not
used by any existing boards, so just remove it.

[[email protected]: Dropped removal of irq_create_of_mapping which was
already removed by abd2363f6a5f1030b935e0bdc15cf917313b3b10
[irq_domain/mips: Allow irq_domain on MIPS]. Moved device_tree_init() and
dependencies to its sole user, the XLP code.]

Signed-off-by: David Daney <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/2946/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: parse chosen node on boot

Call early_init_devtree from inside __dt_setup_arch to allow parsing of the
chosen node.

Signed-off-by: John Crispin <[email protected]>
Cc: [email protected]

MIPS: parse chosen node on boot

Call early_init_devtree from inside __dt_setup_arch to allow parsing of the
chosen node.

Signed-off-by: John Crispin <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/3718/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...