MIPS: generic: enable SMP on SMVP systems

In addition to CPS SMP setups, also try to initialise MT SMP setups with
multiple VPEs per CPU core. CMP SMP support is not provided as it is
considered dep

MIPS: generic: enable SMP on SMVP systems

In addition to CPS SMP setups, also try to initialise MT SMP setups with
multiple VPEs per CPU core. CMP SMP support is not provided as it is
considered deprecated.

Additionally, rework the code by dropping the err variable and make it
similar to how other platforms perform this initialisation.

Co-developed-by: INAGAKI Hiroshi <[email protected]>
Signed-off-by: INAGAKI Hiroshi <[email protected]>
Signed-off-by: Sander Vanheule <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: of: Introduce helper function to get DTB

Selection of the DTB to be used was burried in more or less readable
code in head.S. Move this code into a inline helper function and
use it.

Signed-o

MIPS: of: Introduce helper function to get DTB

Selection of the DTB to be used was burried in more or less readable
code in head.S. Move this code into a inline helper function and
use it.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Acked-by: Florian Fainelli <[email protected]>

show more ...

MIPS: Remove empty prom_free_prom_memory functions

Most of the prom_free_prom_memory functions are empty. With
a new weak prom_free_prom_memory() we can remove all of them.

Signed-off-by: Thomas Bo

MIPS: Remove empty prom_free_prom_memory functions

Most of the prom_free_prom_memory functions are empty. With
a new weak prom_free_prom_memory() we can remove all of them.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
Acked-by: Florian Fainelli <[email protected]>

show more ...

MIPS: generic: Support booting with built-in or appended DTB

The plat_get_fdt() checked that the kernel was booted using UHI before
reading the 'fw_passed_dtb' variable. However, this variable is al

MIPS: generic: Support booting with built-in or appended DTB

The plat_get_fdt() checked that the kernel was booted using UHI before
reading the 'fw_passed_dtb' variable. However, this variable is also set
when the DT has been appended, or when it has been built into the kernel.

Support these usecases by removing the UHI check.

Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: generic: Init command line with fw_init_cmdline()

The function bootcmdline_init() in arch/mips/kernel/setup.c will
populate the boot_command_line string using the parameters hardcoded in
the k

MIPS: generic: Init command line with fw_init_cmdline()

The function bootcmdline_init() in arch/mips/kernel/setup.c will
populate the boot_command_line string using the parameters hardcoded in
the kernel, and those provided in the devicetree file. Then, it would
append the content of the arcs_cmdline variable, which is filled by the
board's plat_mem_setup() function.

The plat_mem_setup() function for the generic MIPS board would just copy
the current boot_command_line to arcs_cmdline, which is nonsense for two
reasons:
- the result will be appended to the boot_command_line anyway, so all it
does is duplicate every single parameter on the command line;
- the code did not perform at all what it's supposed to, which is to
retrieve the parameters passed by the bootloader.

Fix this by calling fw_init_cmdline() in plat_mem_setup(), which will
properly initialize arcs_cmdline to the parameters passed by the
bootloader.

Signed-off-by: Paul Cercueil <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>

show more ...

MIPS: generic: Replace <linux/clk-provider.h> by <linux/of_clk.h>

The generic MIPS platform code is not a clock provider, and just needs
to call of_clk_init().

Hence it can include <linux/of_clk.h>

MIPS: generic: Replace <linux/clk-provider.h> by <linux/of_clk.h>

The generic MIPS platform code is not a clock provider, and just needs
to call of_clk_init().

Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Paul Cercueil <[email protected]>
Cc: James Hartley <[email protected]>
Cc: John Crispin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

show more ...

MIPS: generic: Use __initconst for const init data

Fix the following checkpatch errors:

$ ./scripts/checkpatch.pl --no-tree -f arch/mips/generic/init.c
ERROR: Use of const init definition must use

MIPS: generic: Use __initconst for const init data

Fix the following checkpatch errors:

$ ./scripts/checkpatch.pl --no-tree -f arch/mips/generic/init.c
ERROR: Use of const init definition must use __initconst
#23: FILE: arch/mips/generic/init.c:23:
+static __initdata const void *fdt;

ERROR: Use of const init definition must use __initconst
#24: FILE: arch/mips/generic/init.c:24:
+static __initdata const struct mips_machine *mach;

ERROR: Use of const init definition must use __initconst
#25: FILE: arch/mips/generic/init.c:25:
+static __initdata const void *mach_match_data;

Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

generic: fix appended dtb support

Appended DTB support is mostly intended to be used on legacy systems,
but it is a valid feature that can be enabled for generic platform,
which currently doesn't su

generic: fix appended dtb support

Appended DTB support is mostly intended to be used on legacy systems,
but it is a valid feature that can be enabled for generic platform,
which currently doesn't support it - if selected, the appended DTB will
be ignored by the platform startup code.

During kernel startup, the appended DTB's location is stored in
fw_passed_dtb if the init code finds what appears to be a valid DTB.
Otherwise (if a0 == -2), a1 is stored in fw_passed_dtb, so either way it
will always point to either a user-passed DTB or built-in DTB.

Signed-off-by: Marcin Nowakowski <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]

show more ...

MIPS: generic: fix missing of_node_put()

of_find_compatible_node() returns a device_node pointer with refcount
incremented and must be decremented explicitly.
As this code is using the result only

MIPS: generic: fix missing of_node_put()

of_find_compatible_node() returns a device_node pointer with refcount
incremented and must be decremented explicitly.
As this code is using the result only to check presence of the interrupt
controller (!NULL) but not actually using the result otherwise the
refcount can be decremented here immediately again.

Signed-off-by: Nicholas Mc Guire <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/19820/
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Cc: [email protected]

show more ...

MIPS: generic: remove unnecessary of_platform_populate call

The DT core will call of_platform_populate, so it is not necessary for
arch specific code to call it unless there are custom match entries

MIPS: generic: remove unnecessary of_platform_populate call

The DT core will call of_platform_populate, so it is not necessary for
arch specific code to call it unless there are custom match entries,
auxdata or parent device. Neither of those apply here, so remove the call.

Cc: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/19591/
Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]

show more ...

Update MIPS email addresses

MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those

Update MIPS email addresses

MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:

- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.

- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.

- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).

- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.

New addresses are of the form [email protected], and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.

Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.

Signed-off-by: Paul Burton <[email protected]>
Cc: Deng-Cheng Zhu <[email protected]>
Cc: Deng-Cheng Zhu <[email protected]>
Acked-by: Dengcheng Zhu <[email protected]>
Cc: Matt Redfearn <[email protected]>
Cc: Matt Redfearn <[email protected]>
Acked-by: Matt Redfearn <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

MIPS: generic: Fix compilation error from include asm/mips-cpc.h

Commit e83f7e02af50c ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC
headers") adds a #error to arch/mips/include/asm/mips-cpc.h if

MIPS: generic: Fix compilation error from include asm/mips-cpc.h

Commit e83f7e02af50c ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC
headers") adds a #error to arch/mips/include/asm/mips-cpc.h if it is
included directly. While this commit replaced almost all direct includes
of mips-cm.h and mips-cpc.h, 2 remain.

With some defconfigs, mips-cps.h is indirectly included before
mips-cpc.h, but in others this results in compilation errors:

In file included from arch/mips/generic/init.c:23:0:
./arch/mips/include/asm/mips-cpc.h:12:3: error: #error Please include
asm/mips-cps.h rather than asm/mips-cpc.h
# error Please include asm/mips-cps.h rather than asm/mips-cpc.h

In file included from arch/mips/kernel/smp.c:23:0:
./arch/mips/include/asm/mips-cpc.h:12:3: error: #error Please include
asm/mips-cps.h rather than asm/mips-cpc.h
# error Please include asm/mips-cps.h rather than asm/mips-cpc.h

In both cases, fix this by including mips-cps.h instead.

Fixes: e83f7e02af50c ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC headers")
Signed-off-by: Matt Redfearn <[email protected]>
Patchwork: https://patchwork.linux-mips.org/patch/17492/
Signed-off-by: James Hogan <[email protected]>

show more ...

Update MIPS email addresses

MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those

Update MIPS email addresses

MIPS will soon not be a part of Imagination Technologies, and as such
many @imgtec.com email addresses will no longer be valid. This patch
updates the addresses for those who:

- Have 10 or more patches in mainline authored using an @imgtec.com
email address, or any patches dated within the past year.

- Are still with Imagination but leaving as part of the MIPS business
unit, as determined from an internal email address list.

- Haven't already updated their email address (ie. JamesH) or expressed
a desire to be excluded (ie. Maciej).

- Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt &
myself.

New addresses are of the form [email protected], and all
verified against an internal email address list. An entry is added to
.mailmap for each person such that get_maintainer.pl will report the new
addresses rather than @imgtec.com addresses which will soon be dead.

Instances of the affected addresses throughout the tree are then
mechanically replaced with the new @mips.com address.

Signed-off-by: Paul Burton <[email protected]>
Cc: Deng-Cheng Zhu <[email protected]>
Cc: Deng-Cheng Zhu <[email protected]>
Acked-by: Dengcheng Zhu <[email protected]>
Cc: Matt Redfearn <[email protected]>
Cc: Matt Redfearn <[email protected]>
Acked-by: Matt Redfearn <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/17540/
Signed-off-by: James Hogan <[email protected]>

show more ...

MIPS: generic: Include asm/bootinfo.h for plat_fdt_relocated()

arch/mips/generic/init.c provides an implementation of the
plat_fdt_relocated() function, but doesn't include the asm/bootinfo.h
header

MIPS: generic: Include asm/bootinfo.h for plat_fdt_relocated()

arch/mips/generic/init.c provides an implementation of the
plat_fdt_relocated() function, but doesn't include the asm/bootinfo.h
header which declares it. This leads to a warning from sparse:

arch/mips/generic/init.c:94:13: warning: symbol 'plat_fdt_relocated' was
not declared. Should it be static?

Fix this by including asm/bootinfo.h to get the declaration of
plat_fdt_relocated(). We also #ifdef our definition of
plat_fdt_relocated() such that it is only provided when
CONFIG_RELOCATABLE is set, matching the header & avoiding the redundant
function for non-relocatable kernels.

Signed-off-by: Paul Burton <[email protected]>
Cc: Matt Redfearn <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/17166/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: generic: Abstract FDT fixup application

Introduce an apply_mips_fdt_fixups() function which can apply fixups to
an FDT based upon an array of fixup descriptions. This abstracts that
functional

MIPS: generic: Abstract FDT fixup application

Introduce an apply_mips_fdt_fixups() function which can apply fixups to
an FDT based upon an array of fixup descriptions. This abstracts that
functionality such that legacy board code can apply FDT fixups without
requiring lots of duplication.

Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16184/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

clocksource/drivers: Rename clocksource_probe to timer_probe

The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off

clocksource/drivers: Rename clocksource_probe to timer_probe

The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>

show more ...

MIPS: platform: Allow for DTB to be moved during kernel relocation

Add plat_fdt_relocated(void*) API to allow the kernel relocation code to
update platform's information about the DTB location if th

MIPS: platform: Allow for DTB to be moved during kernel relocation

Add plat_fdt_relocated(void*) API to allow the kernel relocation code to
update platform's information about the DTB location if the DTB had to
be moved due to being placed in a location used by the relocated kernel.

Signed-off-by: Marcin Nowakowski <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14611/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: generic: Fix KASLR for generic kernel.

The KASLR code requires that the plat_get_fdt() function return the
address of the device tree, and it must be available early in the boot,
before prom_i

MIPS: generic: Fix KASLR for generic kernel.

The KASLR code requires that the plat_get_fdt() function return the
address of the device tree, and it must be available early in the boot,
before prom_init() is called. Move the code determining the address of
the device tree into plat_get_fdt, and call that from prom_init().

The fdt pointer will be set up by plat_get_fdt() called from
relocate_kernel initially and once the relocated kernel has started,
prom_init() will use it again to determine the address in the relocated
image.

Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support")
Signed-off-by: Matt Redfearn <[email protected]>
Reviewed-by: James Hogan <[email protected]>
Reviewed-by: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14415/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...

MIPS: generic: Introduce generic DT-based board support

Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS

MIPS: generic: Introduce generic DT-based board support

Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.

Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.

Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.

Signed-off-by: Paul Burton <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14353/
Signed-off-by: Ralf Baechle <[email protected]>

show more ...