m68k: pull mach_beep in setup.c

It is possible to select INPUT_M68K_BEEP in a nommu configuration. This
results in the following link error:

drivers/input/misc/m68kspkr.o: In function `m68kspkr_eve

m68k: pull mach_beep in setup.c

It is possible to select INPUT_M68K_BEEP in a nommu configuration. This
results in the following link error:

drivers/input/misc/m68kspkr.o: In function `m68kspkr_event':
m68kspkr.c:(.text+0x3a): undefined reference to `mach_beep'
m68kspkr.c:(.text+0x5e): undefined reference to `mach_beep'
m68kspkr.c:(.text+0x78): undefined reference to `mach_beep'
drivers/input/misc/m68kspkr.o: In function `m68kspkr_init':
m68kspkr.c:(.init.text+0x4): undefined reference to `mach_beep'

Pull the mach_beep definition in setup.c to avoid it.

Signed-off-by: Alexandre Belloni <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Greg Ungerer <[email protected]>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <[email protected]>
Reviewed-by: Philippe Ombredanne <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a singl

m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<[email protected]>, which was originally written by Arnd Bergmann
<[email protected]>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <[email protected]>

show more ...

m68k/atari: Initial ARAnyM support

Add improved support for running under the ARAnyM emulator
(Atari Running on Any Machine - http://aranym.org/).

[michael, geert: Cleanups and updates]

Signed-off

m68k/atari: Initial ARAnyM support

Add improved support for running under the ARAnyM emulator
(Atari Running on Any Machine - http://aranym.org/).

[michael, geert: Cleanups and updates]

Signed-off-by: Petr Stehlik <[email protected]>
Signed-off-by: Michael Schmitz <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>

show more ...

m68k: Remove dead GG2 config option

CONFIG_GG2 doesn't exist in Kconfig, therefore remove
all references to it from the source.

Signed-off-by: Christian Dietrich <[email protected]

m68k: Remove dead GG2 config option

CONFIG_GG2 doesn't exist in Kconfig, therefore remove
all references to it from the source.

Signed-off-by: Christian Dietrich <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>

show more ...

m68k: Kill several external declarations in source files

- Replace external declarations by proper includes where availiable.
The accesses to some symbols had to be modified, as before they we

m68k: Kill several external declarations in source files

- Replace external declarations by proper includes where availiable.
The accesses to some symbols had to be modified, as before they were
declared using e.g. "extern int _end", while asm-generic/sections.h uses
e.g. "extern char _end[]"
- Remove unused or superfluous external declarations

Signed-off-by: Geert Uytterhoeven <[email protected]>

show more ...

proc: move /proc/hardware to m68k-specific code

Signed-off-by: Alexey Dobriyan <[email protected]>

m68k/apollo: Add missing call to apollo_parse_bootinfo()

Add the missing call to apollo_parse_bootinfo(), which had been lost from a
big Apollo support patch by Peter De Schrijver in 1999.

Thanks t

m68k/apollo: Add missing call to apollo_parse_bootinfo()

Add the missing call to apollo_parse_bootinfo(), which had been lost from a
big Apollo support patch by Peter De Schrijver in 1999.

Thanks to Adrian Bunk for noticing!

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: Allow no CPU/platform type for allnoconfig

Allow no CPU/platform type for allnoconfig
- Provide a dummy value for FPSTATESIZE if no CPU type was selected
- Provide a dummy value for NR_IRQ

m68k: Allow no CPU/platform type for allnoconfig

Allow no CPU/platform type for allnoconfig
- Provide a dummy value for FPSTATESIZE if no CPU type was selected
- Provide a dummy value for NR_IRQS if no platform type was selected
- Warn the user if no CPU or platform type was selected

Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't
build and we cannot easily fix that
(http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b)

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: Correctly handle multi-ISA at runtime

m68k: Correctly handle multi-ISA at runtime in multi-platform kernels

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torva

m68k: Correctly handle multi-ISA at runtime

m68k: Correctly handle multi-ISA at runtime in multi-platform kernels

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: Prefix ISA type with ISA_TYPE_

The *_ISA type defines are quite generic and cause namespace conflicts
(e.g. with `AMIGAHW_DECLARE(GG2_ISA)' in <asm/amigahw.h>) for some kernel
configurations.

m68k: Prefix ISA type with ISA_TYPE_

The *_ISA type defines are quite generic and cause namespace conflicts
(e.g. with `AMIGAHW_DECLARE(GG2_ISA)' in <asm/amigahw.h>) for some kernel
configurations. Use ISA_TYPE_* to avoid such conflicts.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: export m68k_mmutype

UIO needs m68k_mmutype:

ERROR: "m68k_mmutype" [drivers/uio/uio.ko] undefined!

(noticed by Christian T. Steigies)

Signed-off-by: Geert Uytterhoeven <[email protected]>

m68k: export m68k_mmutype

UIO needs m68k_mmutype:

ERROR: "m68k_mmutype" [drivers/uio/uio.ko] undefined!

(noticed by Christian T. Steigies)

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

procfs: constify function pointer tables

Signed-off-by: Jan Engelhardt <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Mike Frysinger <[email protected]>
Acke

procfs: constify function pointer tables

Signed-off-by: Jan Engelhardt <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Mike Frysinger <[email protected]>
Acked-By: David Howells <[email protected]>
Acked-by: Bryan Wu <[email protected]>
Acked-by: Jesper Nilsson <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Introduce flags for reserve_bootmem()

This patchset adds a flags variable to reserve_bootmem() and uses the
BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions
between crashk

Introduce flags for reserve_bootmem()

This patchset adds a flags variable to reserve_bootmem() and uses the
BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions
between crashkernel area and already used memory.

This patch:

Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE.
If that flag is set, the function returns with -EBUSY if the memory already
has been reserved in the past. This is to avoid conflicts.

Because that code runs before SMP initialisation, there's no race condition
inside reserve_bootmem_core().

[[email protected]: coding-style fixes]
[[email protected]: fix powerpc build]
Signed-off-by: Bernhard Walle <[email protected]>
Cc: <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Vivek Goyal <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: Remove unnecessary m68k_memoffset export and init

Remove an unnecessary m68k_memoffset export and initialization

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytte

m68k: Remove unnecessary m68k_memoffset export and init

Remove an unnecessary m68k_memoffset export and initialization

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: missing exports

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

m68k: discontinuous memory support

Fix support for discontinuous memory

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: A

m68k: discontinuous memory support

Fix support for discontinuous memory

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: Mac II ADB fixes

Fix a crash caused by requests placed in the queue with the completed flag
already set. This lead to some ADB_SYNC requests returning early and their
request structs being pop

m68k: Mac II ADB fixes

Fix a crash caused by requests placed in the queue with the completed flag
already set. This lead to some ADB_SYNC requests returning early and their
request structs being popped off the stack while still queued. Stack corruption
ensued or an invalid request callback pointer was invoked or both. Eliminate
macii_retransmit() and its buggy implementation of macii_write(). Have
macii_queue_poll() fully initialise the request queues.

Fix a bug in macii_queue_poll() where the last_req pointer was not being set.
This caused some requests to leave the queue before being completed (and would
also corrupt the stack under certain conditions).

Fix a race in macii_start that could set the state machine to "reading" while
current_req was null.

No longer send poll commands with the ADBREQ_REPLY flag -- doing that caused
the replies to be stored in the request buffer where they were forgotten
about.

Don't autopoll by continuously sending new Talk commands. Get the controller to
do that for us. This reduces the ADB interrupt rate on an idle bus to about 5
per second. Only autopoll the devices that were probed.

Explicitly clear the interrupt flag when polling.

Use disable_irq rather than local_irq_save when polling.

Remove excess local_irq_save/restore pairs.

Improve bus timeout and service request detection.

Remove unused code (last_reply, adb_dir etc) and unneeded code (prefix_len,
first_byte etc).

Change TIP and TACK to their correct names on this ADB controller (ST_EVEN and
ST_ODD).

Add some commentry.

Add a generous quantity of sanity checks (BUG_ONs).

Let m68k macs use the adb_sync boot param too.

Tested on Mac II, Mac IIci, Quadra 650, Quadra 700 etc.

Signed-off-by: Finn Thain <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: early parameter support

Add early parameter support and convert current users to it.

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]

m68k: early parameter support

Add early parameter support and convert current users to it.

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

m68k: reformat various m68k files

Reformat various m68k files, so they actually look like Linux sources.

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <geert

m68k: reformat various m68k files

Reformat various m68k files, so they actually look like Linux sources.

Signed-off-by: Roman Zippel <[email protected]>
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] Dynamic kernel command-line: m68k

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Rom

[PATCH] Dynamic kernel command-line: m68k

Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Roman Zippel <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

[PATCH] clean m68k ksyms

sun3_ksyms gone, m68k_ksyms trimmed down to exports of the assembler ones,
for sun3 added the missing exports of __ioremap() and iounmap().

Signed-off-by: Al Viro <viro@zen

[PATCH] clean m68k ksyms

sun3_ksyms gone, m68k_ksyms trimmed down to exports of the assembler ones,
for sun3 added the missing exports of __ioremap() and iounmap().

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

IRQ: Use the new typedef for interrupt handler function pointers

Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time. This was scr

IRQ: Use the new typedef for interrupt handler function pointers

Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time. This was scripted with the
following small shell script:

#!/bin/sh
egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* |
while read i
do
echo $i
perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
done

Signed-Off-By: David Howells <[email protected]>

show more ...

[PATCH] m68k pt_regs fixes

m68k_handle_int() split in two functions: __m68k_handle_int() takes
pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs
*.

Places where we used to ca

[PATCH] m68k pt_regs fixes

m68k_handle_int() split in two functions: __m68k_handle_int() takes
pt_regs * and does set_irq_regs(); m68k_handle_int() doesn't get pt_regs
*.

Places where we used to call m68k_handle_int() recursively with the same
pt_regs have simply lost the second argument, the rest is switched to
__m68k_handle_int().

The rest of patch is just dropping pt_regs * where needed.

Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

show more ...

Remove obsolete #include <linux/config.h>

Signed-off-by: Jörn Engel <[email protected]>
Signed-off-by: Adrian Bunk <[email protected]>