ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()

When using the frame pointer unwinder, it was found that the stack trace
output of stack_trace_save() is incomplete i

ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()

When using the frame pointer unwinder, it was found that the stack trace
output of stack_trace_save() is incomplete if the stack contains
call_with_stack():

[0x7f00002c] dump_stack_task+0x2c/0x90 [hrtimer]
[0x7f0000a0] hrtimer_hander+0x10/0x18 [hrtimer]
[0x801a67f0] __hrtimer_run_queues+0x1b0/0x3b4
[0x801a7350] hrtimer_run_queues+0xc4/0xd8
[0x801a597c] update_process_times+0x3c/0x88
[0x801b5a98] tick_periodic+0x50/0xd8
[0x801b5bf4] tick_handle_periodic+0x24/0x84
[0x8010ffc4] twd_handler+0x38/0x48
[0x8017d220] handle_percpu_devid_irq+0xa8/0x244
[0x80176e9c] generic_handle_domain_irq+0x2c/0x3c
[0x8052e3a8] gic_handle_irq+0x7c/0x90
[0x808ab15c] generic_handle_arch_irq+0x60/0x80
[0x8051191c] call_with_stack+0x1c/0x20

For the frame pointer unwinder, unwind_frame() checks stackframe::fp by
stackframe::sp. Since call_with_stack() switches the SP from one stack
to another, stackframe::fp and stackframe: :sp will point to different
stacks, so we can no longer check stackframe::fp by stackframe::sp. Skip
checking stackframe::fp at this point to avoid this problem.

Signed-off-by: Li Huafei <[email protected]>
Reviewed-by: Linus Waleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>

show more ...

ARM: call_with_stack: add unwind support

Restructure the code and add the unwind annotations so that both the
frame pointer unwinder as well as the EHABI unwind info based unwinder
will be able to f

ARM: call_with_stack: add unwind support

Restructure the code and add the unwind annotations so that both the
frame pointer unwinder as well as the EHABI unwind info based unwinder
will be able to follow the call stack through call_with_stack().

Since GCC and Clang use different formats for the stack frame, two
methods are implemented: a GCC version that pushes fp, sp, lr and pc for
compatibility with the frame pointer unwinder, and a second version that
works with Clang, as well as with the EHABI unwinder both in ARM and
Thumb2 modes.

Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Tested-by: Keith Packard <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Tested-by: Vladimir Murzin <[email protected]> # ARMv7M

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of th

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 136 file(s).

Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

show more ...

ARM: replace BSYM() with badr assembly macro

BSYM() was invented to allow us to work around a problem with the
assembler, where local symbols resolved by the assembler for the 'adr'
instruction did

ARM: replace BSYM() with badr assembly macro

BSYM() was invented to allow us to work around a problem with the
assembler, where local symbols resolved by the assembler for the 'adr'
instruction did not take account of their ISA.

Since we don't want BSYM() used elsewhere, replace BSYM() with a new
macro 'badr', which is like the 'adr' pseudo-op, but with the BSYM()
mechanics integrated into it. This ensures that the BSYM()-ification
is only used in conjunction with 'adr'.

Acked-by: Dave Martin <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Signed-off-by: Russell King <[email protected]>

show more ...

ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+

ARMv6 and greater introduced a new instruction ("bx") which can be used
to return from function calls. Recent CPUs perform better when the
"b

ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+

ARMv6 and greater introduced a new instruction ("bx") which can be used
to return from function calls. Recent CPUs perform better when the
"bx lr" instruction is used rather than the "mov pc, lr" instruction,
and this sequence is strongly recommended to be used by the ARM
architecture manual (section A.4.1.1).

We provide a new macro "ret" with all its variants for the condition
code which will resolve to the appropriate instruction.

Rather than doing this piecemeal, and miss some instances, change all
the "mov pc" instances to use the new macro, with the exception of
the "movs" instruction and the kprobes code. This allows us to detect
the "mov pc, lr" case and fix it up - and also gives us the possibility
of deploying this for other registers depending on the CPU selection.

Reported-by: Will Deacon <[email protected]>
Tested-by: Stephen Warren <[email protected]> # Tegra Jetson TK1
Tested-by: Robert Jarzmik <[email protected]> # mioa701_bootresume.S
Tested-by: Andrew Lunn <[email protected]> # Kirkwood
Tested-by: Shawn Guo <[email protected]>
Tested-by: Tony Lindgren <[email protected]> # OMAPs
Tested-by: Gregory CLEMENT <[email protected]> # Armada XP, 375, 385
Acked-by: Sekhar Nori <[email protected]> # DaVinci
Acked-by: Christoffer Dall <[email protected]> # kvm/hyp
Acked-by: Haojian Zhuang <[email protected]> # PXA3xx
Acked-by: Stefano Stabellini <[email protected]> # Xen
Tested-by: Uwe Kleine-König <[email protected]> # ARMv7M
Tested-by: Simon Horman <[email protected]> # Shmobile
Signed-off-by: Russell King <[email protected]>

show more ...

ARM: lib: add call_with_stack function for safely changing stack

When disabling the MMU, it is necessary to take out a 1:1 identity map
of the reset code so that it can safely be executed with and w

ARM: lib: add call_with_stack function for safely changing stack

When disabling the MMU, it is necessary to take out a 1:1 identity map
of the reset code so that it can safely be executed with and without
the MMU active. To avoid the situation where the physical address of the
reset code aliases with the virtual address of the active stack (which
cannot be included in the 1:1 mapping), it is desirable to change to a
new stack at a location which is less likely to alias.

This code adds a new lib function, call_with_stack:

void call_with_stack(void (*fn)(void *), void *arg, void *sp);

which changes the stack to point at the sp parameter, before invoking
fn(arg) with the new stack selected.

Reviewed-by: Nicolas Pitre <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Will Deacon <[email protected]>

show more ...