|
Revision tags: v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2, v6.14-rc1, v6.13 |
|
| #
b029628b |
| 13-Jan-2025 |
Eric W. Biederman <[email protected]> |
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
Richard Henderson <[email protected]> writes[1]:
> There was a Spec benchmark (I forget which) which was memory b
alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
Richard Henderson <[email protected]> writes[1]:
> There was a Spec benchmark (I forget which) which was memory bound and ran > twice as fast with 32-bit pointers. > > I copied the idea from DEC to the ELF abi, but never did all the other work > to allow the toolchain to take advantage. > > Amusingly, a later Spec changed the benchmark data sets to not fit into a > 32-bit address space, specifically because of this. > > I expect one could delete the ELF bit and personality and no one would > notice. Not even the 10 remaining Alpha users.
In [2] it was pointed out that parts of setarch weren't working properly on alpha because it has it's own SET_PERSONALITY implementation. In the discussion that followed Richard Henderson pointed out that the 32bit pointer support for alpha was never completed.
Fix this by removing alpha's 32bit pointer support.
As a bit of paranoia refuse to execute any alpha binaries that have the EF_ALPHA_32BIT flag set. Just in case someone somewhere has binaries that try to use alpha's 32bit pointer support.
Link: https://lkml.kernel.org/r/CAFXwXrkgu=4Qn-v1PjnOR4SG0oUb9LSa0g6QXpBq4ttm52pJOQ@mail.gmail.com [1] Link: https://lkml.kernel.org/r/[email protected] [2] Signed-off-by: Eric W. Biederman <[email protected]> Reviewed-by: Richard Henderson <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: John Paul Adrian Glaubitz <[email protected]> Tested-by: John Paul Adrian Glaubitz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]>
show more ...
|
|
Revision tags: v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4, v6.13-rc3, v6.13-rc2, v6.13-rc1, v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5, v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1, v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1, v6.8, v6.8-rc7, v6.8-rc6, v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2, v6.8-rc1, v6.7, v6.7-rc8, v6.7-rc7, v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6 |
|
| #
c8afaa1b |
| 12-Aug-2023 |
Mateusz Guzik <[email protected]> |
locking: remove spin_lock_prefetch
The only remaining consumer is new_inode, where it showed up in 2001 as commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1] with a changelog whi
locking: remove spin_lock_prefetch
The only remaining consumer is new_inode, where it showed up in 2001 as commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1] with a changelog which does not mention it.
Since then the line got only touched up to keep compiling.
While it may have been of benefit back in the day, it is guaranteed to at best not get in the way in the multicore setting -- as the code performs *a lot* of work between the prefetch and actual lock acquire, any contention means the cacheline is already invalid by the time the routine calls spin_lock(). It adds spurious traffic, for short.
On top of it prefetch is notoriously tricky to use for single-threaded purposes, making it questionable from the get go.
As such, remove it.
I admit upfront I did not see value in benchmarking this change, but I can do it if that is deemed appropriate.
Removal from new_inode and of the entire thing are in the same patch as requested by Linus, so whatever weird looks can be directed at that guy.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1] Signed-off-by: Mateusz Guzik <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
show more ...
|
|
Revision tags: v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5, v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2 |
|
| #
2be9880d |
| 19-Aug-2022 |
Kefeng Wang <[email protected]> |
kernel: exit: cleanup release_thread()
Only x86 has own release_thread(), introduce a new weak release_thread() function to clean empty definitions in other ARCHs.
Link: https://lkml.kernel.org/r/2
kernel: exit: cleanup release_thread()
Only x86 has own release_thread(), introduce a new weak release_thread() function to clean empty definitions in other ARCHs.
Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Kefeng Wang <[email protected]> Acked-by: Guo Ren <[email protected]> [csky] Acked-by: Russell King (Oracle) <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Brian Cain <[email protected]> Acked-by: Michael Ellerman <[email protected]> [powerpc] Acked-by: Stafford Horne <[email protected]> [openrisc] Acked-by: Catalin Marinas <[email protected]> [arm64] Acked-by: Huacai Chen <[email protected]> [LoongArch] Cc: Alexander Gordeev <[email protected]> Cc: Anton Ivanov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Dave Hansen <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Dinh Nguyen <[email protected]> Cc: Guo Ren <[email protected]> [csky] Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: James Bottomley <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michal Simek <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Will Deacon <[email protected]> Cc: Xuerui Wang <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
show more ...
|
|
Revision tags: v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4 |
|
| #
967747bb |
| 11-Feb-2022 |
Arnd Bergmann <[email protected]> |
uaccess: remove CONFIG_SET_FS
There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it.
This turns access_ok()
uaccess: remove CONFIG_SET_FS
There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it.
This turns access_ok() into a cheaper check against TASK_SIZE_MAX.
As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().
Acked-by: Sam Ravnborg <[email protected]> # for sparc32 changes Acked-by: "Eric W. Biederman" <[email protected]> Tested-by: Sergey Matyukevich <[email protected]> # for arc changes Acked-by: Stafford Horne <[email protected]> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
show more ...
|
|
Revision tags: v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4 |
|
| #
42a20f86 |
| 29-Sep-2021 |
Kees Cook <[email protected]> |
sched: Add wrapper for get_wchan() to keep task blocked
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding.
Suggested-by: Peter Zij
sched: Add wrapper for get_wchan() to keep task blocked
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding.
Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Russell King (Oracle) <[email protected]> [arm] Tested-by: Mark Rutland <[email protected]> [arm64] Link: https://lkml.kernel.org/r/[email protected]
show more ...
|
|
Revision tags: v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7, v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6, v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6, v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8, v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1, v5.8, v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1, v5.7, v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2, v5.7-rc1, v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5, v5.6-rc4, v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7, v5.5-rc6, v5.5-rc5, v5.5-rc4, v5.5-rc3, v5.5-rc2, v5.5-rc1, v5.4, v5.4-rc8, v5.4-rc7, v5.4-rc6, v5.4-rc5, v5.4-rc4, v5.4-rc3, v5.4-rc2, v5.4-rc1, v5.3, v5.3-rc8, v5.3-rc7, v5.3-rc6, v5.3-rc5, v5.3-rc4, v5.3-rc3, v5.3-rc2, v5.3-rc1, v5.2, v5.2-rc7, v5.2-rc6, v5.2-rc5, v5.2-rc4, v5.2-rc3, v5.2-rc2, v5.2-rc1, v5.1, v5.1-rc7, v5.1-rc6, v5.1-rc5, v5.1-rc4, v5.1-rc3, v5.1-rc2, v5.1-rc1, v5.0, v5.0-rc8, v5.0-rc7, v5.0-rc6, v5.0-rc5, v5.0-rc4, v5.0-rc3, v5.0-rc2, v5.0-rc1, v4.20, v4.20-rc7, v4.20-rc6, v4.20-rc5, v4.20-rc4, v4.20-rc3, v4.20-rc2, v4.20-rc1 |
|
| #
de0d22e5 |
| 30-Oct-2018 |
Nick Desaulniers <[email protected]> |
treewide: remove current_text_addr
Prefer _THIS_IP_ defined in linux/kernel.h.
Most definitions of current_text_addr were the same as _THIS_IP_, but a few archs had inline assembly instead.
This p
treewide: remove current_text_addr
Prefer _THIS_IP_ defined in linux/kernel.h.
Most definitions of current_text_addr were the same as _THIS_IP_, but a few archs had inline assembly instead.
This patch removes the final call site of current_text_addr, making all of the definitions dead code.
[[email protected]: fix arch/csky/include/asm/processor.h] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
show more ...
|
|
Revision tags: v4.19, v4.19-rc8, v4.19-rc7, v4.19-rc6, v4.19-rc5, v4.19-rc4, v4.19-rc3, v4.19-rc2, v4.19-rc1, v4.18, v4.18-rc8, v4.18-rc7, v4.18-rc6, v4.18-rc5, v4.18-rc4, v4.18-rc3, v4.18-rc2, v4.18-rc1, v4.17, v4.17-rc7, v4.17-rc6, v4.17-rc5, v4.17-rc4, v4.17-rc3, v4.17-rc2, v4.17-rc1, v4.16, v4.16-rc7, v4.16-rc6, v4.16-rc5, v4.16-rc4, v4.16-rc3, v4.16-rc2, v4.16-rc1, v4.15, v4.15-rc9, v4.15-rc8, v4.15-rc7, v4.15-rc6, v4.15-rc5, v4.15-rc4, v4.15-rc3, v4.15-rc2, v4.15-rc1, v4.14, v4.14-rc8, v4.14-rc7, v4.14-rc6, v4.14-rc5, v4.14-rc4, v4.14-rc3, v4.14-rc2 |
|
| #
16dc17ee |
| 18-Sep-2017 |
Tobias Klauser <[email protected]> |
alpha: make thread_saved_pc static
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"), so
alpha: make thread_saved_pc static
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"), so it no longer needs to be globally defined for Alpha and can be made static.
Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Matt Turner <[email protected]>
show more ...
|
| #
b2441318 |
| 01-Nov-2017 |
Greg Kroah-Hartman <[email protected]> |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license identifiers to apply.
- when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary:
SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became the concluded license(s).
- when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.
In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches.
Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Philippe Ombredanne <[email protected]> Reviewed-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
show more ...
|
|
Revision tags: v4.14-rc1, v4.13, v4.13-rc7, v4.13-rc6, v4.13-rc5, v4.13-rc4, v4.13-rc3, v4.13-rc2, v4.13-rc1, v4.12, v4.12-rc7, v4.12-rc6, v4.12-rc5, v4.12-rc4, v4.12-rc3, v4.12-rc2, v4.12-rc1, v4.11, v4.11-rc8, v4.11-rc7, v4.11-rc6, v4.11-rc5, v4.11-rc4, v4.11-rc3, v4.11-rc2, v4.11-rc1, v4.10, v4.10-rc8, v4.10-rc7, v4.10-rc6, v4.10-rc5, v4.10-rc4, v4.10-rc3, v4.10-rc2, v4.10-rc1, v4.9, v4.9-rc8, v4.9-rc7, v4.9-rc6 |
|
| #
6d0d2878 |
| 16-Nov-2016 |
Christian Borntraeger <[email protected]> |
locking/core: Provide common cpu_relax_yield() definition
No need to duplicate the same define everywhere. Since the only user is stop-machine and the only provider is s390, we can use a default imp
locking/core: Provide common cpu_relax_yield() definition
No need to duplicate the same define everywhere. Since the only user is stop-machine and the only provider is s390, we can use a default implementation of cpu_relax_yield() in sched.h.
Suggested-by: Russell King <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Acked-by: Russell King <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Noam Camus <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: linux-s390 <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
show more ...
|
|
Revision tags: v4.9-rc5, v4.9-rc4, v4.9-rc3 |
|
| #
5bd0b85b |
| 25-Oct-2016 |
Christian Borntraeger <[email protected]> |
locking/core, arch: Remove cpu_relax_lowlatency()
As there are no users left, we can remove cpu_relax_lowlatency() implementations from every architecture.
Signed-off-by: Christian Borntraeger <bor
locking/core, arch: Remove cpu_relax_lowlatency()
As there are no users left, we can remove cpu_relax_lowlatency() implementations from every architecture.
Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Noam Camus <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Russell King <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
show more ...
|
| #
79ab11cd |
| 25-Oct-2016 |
Christian Borntraeger <[email protected]> |
locking/core: Introduce cpu_relax_yield()
For spinning loops people do often use barrier() or cpu_relax(). For most architectures cpu_relax and barrier are the same, but on some architectures cpu_re
locking/core: Introduce cpu_relax_yield()
For spinning loops people do often use barrier() or cpu_relax(). For most architectures cpu_relax and barrier are the same, but on some architectures cpu_relax can add some latency. For example on power,sparc64 and arc, cpu_relax can shift the CPU towards other hardware threads in an SMT environment. On s390 cpu_relax does even more, it uses an hypercall to the hypervisor to give up the timeslice. In contrast to the SMT yielding this can result in larger latencies. In some places this latency is unwanted, so another variant "cpu_relax_lowlatency" was introduced. Before this is used in more and more places, lets revert the logic and provide a cpu_relax_yield that can be called in places where yielding is more important than latency. By default this is the same as cpu_relax on all architectures.
Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Noam Camus <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Russell King <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
show more ...
|
|
Revision tags: v4.9-rc2, v4.9-rc1, v4.8, v4.8-rc8, v4.8-rc7, v4.8-rc6, v4.8-rc5, v4.8-rc4, v4.8-rc3, v4.8-rc2, v4.8-rc1, v4.7, v4.7-rc7, v4.7-rc6, v4.7-rc5, v4.7-rc4, v4.7-rc3, v4.7-rc2, v4.7-rc1, v4.6, v4.6-rc7, v4.6-rc6, v4.6-rc5, v4.6-rc4, v4.6-rc3, v4.6-rc2, v4.6-rc1, v4.5, v4.5-rc7, v4.5-rc6, v4.5-rc5, v4.5-rc4, v4.5-rc3, v4.5-rc2, v4.5-rc1, v4.4, v4.4-rc8, v4.4-rc7, v4.4-rc6, v4.4-rc5, v4.4-rc4, v4.4-rc3, v4.4-rc2, v4.4-rc1, v4.3, v4.3-rc7, v4.3-rc6, v4.3-rc5, v4.3-rc4, v4.3-rc3, v4.3-rc2, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1 |
|
| #
396ada68 |
| 16-Apr-2015 |
Richard Weinberger <[email protected]> |
alpha: forward declare struct pt_regs in processor.h
Removal of exec domains uncovered this new warning. processor.h re-used struct pt_regs from personality.h which is now gone.
./arch/alpha/inc
alpha: forward declare struct pt_regs in processor.h
Removal of exec domains uncovered this new warning. processor.h re-used struct pt_regs from personality.h which is now gone.
./arch/alpha/include/asm/processor.h:47:33: warning: 'struct pt_regs' declared inside parameter list [enabled by default]
Signed-off-by: Richard Weinberger <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Matt Turner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
show more ...
|
|
Revision tags: v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4 |
|
| #
3a6bfbc9 |
| 29-Jun-2014 |
Davidlohr Bueso <[email protected]> |
arch, locking: Ciao arch_mutex_cpu_relax()
The arch_mutex_cpu_relax() function, introduced by 34b133f, is hacky and ugly. It was added a few years ago to address the fact that common cpu_relax() cal
arch, locking: Ciao arch_mutex_cpu_relax()
The arch_mutex_cpu_relax() function, introduced by 34b133f, is hacky and ugly. It was added a few years ago to address the fact that common cpu_relax() calls include yielding on s390, and thus impact the optimistic spinning functionality of mutexes. Nowadays we use this function well beyond mutexes: rwsem, qrwlock, mcs and lockref. Since the macro that defines the call is in the mutex header, any users must include mutex.h and the naming is misleading as well.
This patch (i) renames the call to cpu_relax_lowlatency ("relax, but only if you can do it with very low latency") and (ii) defines it in each arch's asm/processor.h local header, just like for regular cpu_relax functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax, and thus we can take it out of mutex.h. While this can seem redundant, I believe it is a good choice as it allows us to move out arch specific logic from generic locking primitives and enables future(?) archs to transparently define it, similarly to System Z.
Signed-off-by: Davidlohr Bueso <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Anton Blanchard <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Bharat Bhushan <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Chen Liqin <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Chris Zankel <[email protected]> Cc: David Howells <[email protected]> Cc: David S. Miller <[email protected]> Cc: Deepthi Dharwar <[email protected]> Cc: Dominik Dingel <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Guan Xuetao <[email protected]> Cc: Haavard Skinnemoen <[email protected]> Cc: Hans-Christian Egtvedt <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Helge Deller <[email protected]> Cc: Hirokazu Takata <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: James Hogan <[email protected]> Cc: Jason Wang <[email protected]> Cc: Jesper Nilsson <[email protected]> Cc: Joe Perches <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: Joseph Myers <[email protected]> Cc: Kees Cook <[email protected]> Cc: Koichi Yasutake <[email protected]> Cc: Lennox Wu <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mark Salter <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Matt Turner <[email protected]> Cc: Max Filippov <[email protected]> Cc: Michael Neuling <[email protected]> Cc: Michal Simek <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: Nicolas Pitre <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Paul Burton <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Paul Gortmaker <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Qais Yousef <[email protected]> Cc: Qiaowei Ren <[email protected]> Cc: Rafael Wysocki <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Russell King <[email protected]> Cc: Steven Miao <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Stratos Karafotis <[email protected]> Cc: Tim Chen <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vasily Kulikov <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Waiman Long <[email protected]> Cc: Will Deacon <[email protected]> Cc: Wolfram Sang <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
show more ...
|
|
Revision tags: v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6 |
|
| #
cba1ec7e |
| 10-Sep-2012 |
Al Viro <[email protected]> |
alpha: switch to generic kernel_thread()
Signed-off-by: Al Viro <[email protected]>
|
|
Revision tags: v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4 |
|
| #
55ccf3fe |
| 16-May-2012 |
Suresh Siddha <[email protected]> |
fork: move the real prepare_to_copy() users to arch_dup_task_struct()
Historical prepare_to_copy() is mostly a no-op, duplicated for majority of the architectures and the rest following the x86 mode
fork: move the real prepare_to_copy() users to arch_dup_task_struct()
Historical prepare_to_copy() is mostly a no-op, duplicated for majority of the architectures and the rest following the x86 model of flushing the extended register state like fpu there.
Remove it and use the arch_dup_task_struct() instead.
Suggested-by: Oleg Nesterov <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Suresh Siddha <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Acked-by: Benjamin Herrenschmidt <[email protected]> Cc: David Howells <[email protected]> Cc: Koichi Yasutake <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Paul Mundt <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Russell King <[email protected]> Cc: Haavard Skinnemoen <[email protected]> Cc: Mike Frysinger <[email protected]> Cc: Mark Salter <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: Mikael Starvik <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Richard Kuo <[email protected]> Cc: Tony Luck <[email protected]> Cc: Michal Simek <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Jonas Bonn <[email protected]> Cc: James E.J. Bottomley <[email protected]> Cc: Helge Deller <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Chen Liqin <[email protected]> Cc: Lennox Wu <[email protected]> Cc: David S. Miller <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Jeff Dike <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Guan Xuetao <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
show more ...
|
|
Revision tags: v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4, v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3, v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1, v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4 |
|
| #
024b246e |
| 15-Aug-2008 |
Linus Torvalds <[email protected]> |
alpha: move include/asm-alpha to arch/alpha/include/asm
Sam Ravnborg did the build-test that the direct header file move works, I'm just committing it.
This is a pure move:
mkdir arch/alpha/inclu
alpha: move include/asm-alpha to arch/alpha/include/asm
Sam Ravnborg did the build-test that the direct header file move works, I'm just committing it.
This is a pure move:
mkdir arch/alpha/include git mv include/asm-alpha arch/alpha/include/asm
with no other changes.
Requested-and-tested-by: Sam Ravnborg <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
show more ...
|