|
Revision tags: v6.15, v6.15-rc7, v6.15-rc6, v6.15-rc5, v6.15-rc4, v6.15-rc3, v6.15-rc2, v6.15-rc1, v6.14, v6.14-rc7, v6.14-rc6, v6.14-rc5, v6.14-rc4, v6.14-rc3, v6.14-rc2, v6.14-rc1, v6.13, v6.13-rc7, v6.13-rc6, v6.13-rc5, v6.13-rc4, v6.13-rc3, v6.13-rc2, v6.13-rc1, v6.12, v6.12-rc7, v6.12-rc6, v6.12-rc5, v6.12-rc4, v6.12-rc3, v6.12-rc2, v6.12-rc1, v6.11, v6.11-rc7, v6.11-rc6, v6.11-rc5, v6.11-rc4, v6.11-rc3, v6.11-rc2, v6.11-rc1, v6.10, v6.10-rc7, v6.10-rc6, v6.10-rc5, v6.10-rc4, v6.10-rc3, v6.10-rc2, v6.10-rc1, v6.9, v6.9-rc7, v6.9-rc6, v6.9-rc5, v6.9-rc4, v6.9-rc3, v6.9-rc2, v6.9-rc1, v6.8, v6.8-rc7, v6.8-rc6, v6.8-rc5, v6.8-rc4, v6.8-rc3, v6.8-rc2, v6.8-rc1, v6.7, v6.7-rc8, v6.7-rc7, v6.7-rc6, v6.7-rc5, v6.7-rc4, v6.7-rc3, v6.7-rc2, v6.7-rc1, v6.6, v6.6-rc7, v6.6-rc6, v6.6-rc5, v6.6-rc4, v6.6-rc3, v6.6-rc2, v6.6-rc1, v6.5, v6.5-rc7, v6.5-rc6, v6.5-rc5, v6.5-rc4, v6.5-rc3, v6.5-rc2, v6.5-rc1, v6.4, v6.4-rc7, v6.4-rc6, v6.4-rc5, v6.4-rc4, v6.4-rc3, v6.4-rc2, v6.4-rc1, v6.3, v6.3-rc7, v6.3-rc6, v6.3-rc5, v6.3-rc4, v6.3-rc3, v6.3-rc2, v6.3-rc1, v6.2, v6.2-rc8, v6.2-rc7, v6.2-rc6, v6.2-rc5, v6.2-rc4, v6.2-rc3, v6.2-rc2, v6.2-rc1, v6.1, v6.1-rc8, v6.1-rc7, v6.1-rc6, v6.1-rc5 |
|
| #
2640a82b |
| 08-Nov-2022 |
Ido Schimmel <[email protected]> |
devlink: Add packet traps for 802.1X operation
Add packet traps for 802.1X operation. The "eapol" control trap is used
to trap EAPOL packets and is required for the correct operation of the
control
devlink: Add packet traps for 802.1X operation
Add packet traps for 802.1X operation. The "eapol" control trap is used
to trap EAPOL packets and is required for the correct operation of the
control plane. The "locked_port" drop trap can be enabled to gain
visibility into packets that were dropped by the device due to the
locked bridge port check.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
show more ...
|
|
Revision tags: v6.1-rc4, v6.1-rc3, v6.1-rc2, v6.1-rc1, v6.0, v6.0-rc7, v6.0-rc6, v6.0-rc5, v6.0-rc4, v6.0-rc3, v6.0-rc2, v6.0-rc1, v5.19, v5.19-rc8, v5.19-rc7, v5.19-rc6, v5.19-rc5, v5.19-rc4, v5.19-rc3, v5.19-rc2, v5.19-rc1, v5.18, v5.18-rc7, v5.18-rc6, v5.18-rc5, v5.18-rc4, v5.18-rc3, v5.18-rc2, v5.18-rc1, v5.17, v5.17-rc8, v5.17-rc7, v5.17-rc6, v5.17-rc5, v5.17-rc4, v5.17-rc3, v5.17-rc2, v5.17-rc1, v5.16, v5.16-rc8, v5.16-rc7, v5.16-rc6, v5.16-rc5, v5.16-rc4, v5.16-rc3, v5.16-rc2, v5.16-rc1, v5.15, v5.15-rc7, v5.15-rc6, v5.15-rc5, v5.15-rc4, v5.15-rc3, v5.15-rc2, v5.15-rc1, v5.14, v5.14-rc7, v5.14-rc6, v5.14-rc5, v5.14-rc4, v5.14-rc3, v5.14-rc2, v5.14-rc1, v5.13, v5.13-rc7 |
|
| #
8d4a0adc |
| 16-Jun-2021 |
Mauro Carvalho Chehab <[email protected]> |
docs: networking: devlink: avoid using ReST :doc:`foo` markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Maur
docs: networking: devlink: avoid using ReST :doc:`foo` markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/4553858bc9a5442eba6d71caff8047e84ece4d9b.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>
show more ...
|
| #
01f1b6ed |
| 16-Jun-2021 |
Oleksandr Mazur <[email protected]> |
documentation: networking: devlink: fix prestera.rst formatting that causes build warnings
Fixes: 66826c43e63d ("documentation: networking: devlink: add prestera switched driver Documentation")
Sig
documentation: networking: devlink: fix prestera.rst formatting that causes build warnings
Fixes: 66826c43e63d ("documentation: networking: devlink: add prestera switched driver Documentation")
Signed-off-by: Oleksandr Mazur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.13-rc6, v5.13-rc5, v5.13-rc4, v5.13-rc3, v5.13-rc2, v5.13-rc1, v5.12, v5.12-rc8, v5.12-rc7, v5.12-rc6, v5.12-rc5, v5.12-rc4, v5.12-rc3, v5.12-rc2, v5.12-rc1, v5.12-rc1-dontuse, v5.11, v5.11-rc7, v5.11-rc6 |
|
| #
e78ab164 |
| 26-Jan-2021 |
Aya Levin <[email protected]> |
devlink: Add DMAC filter generic packet trap
Add packet trap that can report packets that were dropped due to
destination MAC filtering.
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Ido
devlink: Add DMAC filter generic packet trap
Add packet trap that can report packets that were dropped due to
destination MAC filtering.
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
show more ...
|
|
Revision tags: v5.11-rc5, v5.11-rc4, v5.11-rc3, v5.11-rc2, v5.11-rc1, v5.10, v5.10-rc7, v5.10-rc6 |
|
| #
f0a5013e |
| 23-Nov-2020 |
Ido Schimmel <[email protected]> |
devlink: Add blackhole_nexthop trap
Add a packet trap to report packets that were dropped due to a
blackhole nexthop.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <jiri@n
devlink: Add blackhole_nexthop trap
Add a packet trap to report packets that were dropped due to a
blackhole nexthop.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
show more ...
|
|
Revision tags: v5.10-rc5, v5.10-rc4, v5.10-rc3, v5.10-rc2, v5.10-rc1, v5.9, v5.9-rc8 |
|
| #
10c24eb2 |
| 01-Oct-2020 |
Ioana Ciornei <[email protected]> |
devlink: add parser error drop packet traps
Add parser error drop packet traps, so that capable device driver could
register them with devlink. The new packet trap group holds any drops of
packets w
devlink: add parser error drop packet traps
Add parser error drop packet traps, so that capable device driver could
register them with devlink. The new packet trap group holds any drops of
packets which were marked by the device as erroneous during header
parsing. Add documentation for every added packet trap and packet trap
group.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.9-rc7, v5.9-rc6, v5.9-rc5, v5.9-rc4, v5.9-rc3, v5.9-rc2, v5.9-rc1 |
|
| #
08e335f6 |
| 03-Aug-2020 |
Amit Cohen <[email protected]> |
devlink: Add early_drop trap
Add the packet trap that can report packets that were ECN marked due to RED
AQM.
Signed-off-by: Amit Cohen <[email protected]>
Signed-off-by: Petr Machata <petrm@mella
devlink: Add early_drop trap
Add the packet trap that can report packets that were ECN marked due to RED
AQM.
Signed-off-by: Amit Cohen <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.8 |
|
| #
ec4f5b36 |
| 29-Jul-2020 |
Ido Schimmel <[email protected]> |
mlxsw: spectrum: Use different trap group for externally routed packets
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped
mlxsw: spectrum: Use different trap group for externally routed packets
Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.
This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.
Fix this by using a different trap group for externally routed packets.
Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps")
Reported-by: Alex Veber <[email protected]>
Tested-by: Alex Veber <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.8-rc7, v5.8-rc6, v5.8-rc5, v5.8-rc4, v5.8-rc3, v5.8-rc2, v5.8-rc1, v5.7 |
|
| #
5eb18a2b |
| 29-May-2020 |
Ido Schimmel <[email protected]> |
devlink: Add ACL control packet traps
Add packet traps for packets that are sampled / trapped by ACLs, so that
capable drivers could register them with devlink. Add documentation for
every added pac
devlink: Add ACL control packet traps
Add packet traps for packets that are sampled / trapped by ACLs, so that
capable drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
d77cfd16 |
| 29-May-2020 |
Ido Schimmel <[email protected]> |
devlink: Add layer 3 control packet traps
Add layer 3 control packet traps such as ARP and DHCP, so that capable
device drivers could register them with devlink. Add documentation for
every added pa
devlink: Add layer 3 control packet traps
Add layer 3 control packet traps such as ARP and DHCP, so that capable
device drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
515eac67 |
| 29-May-2020 |
Ido Schimmel <[email protected]> |
devlink: Add layer 2 control packet traps
Add layer 2 control packet traps such as STP and IGMP query, so that
capable device drivers could register them with devlink. Add
documentation for every ad
devlink: Add layer 2 control packet traps
Add layer 2 control packet traps such as STP and IGMP query, so that
capable device drivers could register them with devlink. Add
documentation for every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
30a4e9a2 |
| 29-May-2020 |
Ido Schimmel <[email protected]> |
devlink: Add 'control' trap type
This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.
Do not report such packets to the kernel's drop monitor as they
devlink: Add 'control' trap type
This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.
Do not report such packets to the kernel's drop monitor as they were not
dropped by the device no encountered an exception during forwarding.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
9eefeabe |
| 29-May-2020 |
Ido Schimmel <[email protected]> |
devlink: Add 'mirror' trap action
The action is used by control traps such as IGMP query. The packet is
flooded by the device, but also trapped to the CPU in order for the
software bridge to mark th
devlink: Add 'mirror' trap action
The action is used by control traps such as IGMP query. The packet is
flooded by the device, but also trapped to the CPU in order for the
software bridge to mark the receiving port as a multicast router port.
Such packets are marked with 'skb->offload_fwd_mark = 1' in order to
prevent the software bridge from flooding them again.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
678eb199 |
| 29-May-2020 |
Ido Schimmel <[email protected]> |
devlink: Create dedicated trap group for layer 3 exceptions
Packets that hit exceptions during layer 3 forwarding must be trapped to
the CPU for the control plane to function properly. Create a dedi
devlink: Create dedicated trap group for layer 3 exceptions
Packets that hit exceptions during layer 3 forwarding must be trapped to
the CPU for the control plane to function properly. Create a dedicated
group for them, so that user space could choose to assign a different
policer for them.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.7-rc7, v5.7-rc6, v5.7-rc5, v5.7-rc4, v5.7-rc3, v5.7-rc2, v5.7-rc1 |
|
| #
e750b84d |
| 08-Apr-2020 |
Lothar Rubusch <[email protected]> |
Documentation: devlink: fix broken link warning
At 'make htmldocs' the following warning is thrown:
Documentation/networking/devlink/devlink-trap.rst:302:
WARNING: undefined label: generic-packet-t
Documentation: devlink: fix broken link warning
At 'make htmldocs' the following warning is thrown:
Documentation/networking/devlink/devlink-trap.rst:302:
WARNING: undefined label: generic-packet-trap-groups
Fixes the warning by setting the label to the specified header,
within the same document.
Signed-off-by: Lothar Rubusch <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
ef7d5c7d |
| 30-Mar-2020 |
Ido Schimmel <[email protected]> |
Documentation: Add description of packet trap policers
Extend devlink-trap documentation with information about packet trap
policers.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by:
Documentation: Add description of packet trap policers
Extend devlink-trap documentation with information about packet trap
policers.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.6, v5.6-rc7, v5.6-rc6, v5.6-rc5, v5.6-rc4 |
|
| #
ecd942a0 |
| 24-Feb-2020 |
Jiri Pirko <[email protected]> |
devlink: add ACL generic packet traps
Add packet traps that can report packets that were dropped during ACL
processing.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <id
devlink: add ACL generic packet traps
Add packet traps that can report packets that were dropped during ACL
processing.
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.6-rc3, v5.6-rc2, v5.6-rc1, v5.5, v5.5-rc7 |
|
| #
c3cae491 |
| 19-Jan-2020 |
Amit Cohen <[email protected]> |
devlink: Add overlay source MAC is multicast trap
Add packet trap that can report NVE packets that the device decided to
drop because their overlay source MAC is multicast.
Signed-off-by: Amit Cohe
devlink: Add overlay source MAC is multicast trap
Add packet trap that can report NVE packets that the device decided to
drop because their overlay source MAC is multicast.
Signed-off-by: Amit Cohen <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
13c056ec |
| 19-Jan-2020 |
Amit Cohen <[email protected]> |
devlink: Add tunnel generic packet traps
Add packet traps that can report packets that were dropped during tunnel
decapsulation.
Signed-off-by: Amit Cohen <[email protected]>
Acked-by: Jiri Pirko
devlink: Add tunnel generic packet traps
Add packet traps that can report packets that were dropped during tunnel
decapsulation.
Signed-off-by: Amit Cohen <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
95f0ead8 |
| 19-Jan-2020 |
Amit Cohen <[email protected]> |
devlink: Add non-routable packet trap
Add packet trap that can report packets that reached the router, but are
non-routable. For example, IGMP queries can be flooded by the device in
layer 2 and rea
devlink: Add non-routable packet trap
Add packet trap that can report packets that reached the router, but are
non-routable. For example, IGMP queries can be flooded by the device in
layer 2 and reach the router. Such packets should not be routed and
instead dropped.
Signed-off-by: Amit Cohen <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
5b051621 |
| 19-Jan-2020 |
Amit Cohen <[email protected]> |
mlxsw: Add irif and erif disabled traps
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are
dropped for these reasons when they need to be routed through/from
existing router inte
mlxsw: Add irif and erif disabled traps
IRIF_DISABLED and ERIF_DISABLED are driver specific traps. Packets are
dropped for these reasons when they need to be routed through/from
existing router interfaces (RIF) which are disabled.
Add devlink driver-specific traps and mlxsw trap IDs used to report
these traps.
Signed-off-by: Amit Cohen <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
|
Revision tags: v5.5-rc6 |
|
| #
04e4272c |
| 09-Jan-2020 |
Jacob Keller <[email protected]> |
devlink: rename and expand devlink-trap-netdevsim.rst
Rename the trap-specific netdevimsim.rst file, and expand it to include
documentation of all the devlink features currently implemented by the
n
devlink: rename and expand devlink-trap-netdevsim.rst
Rename the trap-specific netdevimsim.rst file, and expand it to include
documentation of all the devlink features currently implemented by the
netdevsim driver code.
Signed-off-by: Jacob Keller <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|
| #
f4bdd710 |
| 09-Jan-2020 |
Jacob Keller <[email protected]> |
devlink: move devlink documentation to subfolder
Combine the documentation for devlink into a subfolder, and provide an
index.rst file that can be used to generally describe devlink.
Signed-off-by:
devlink: move devlink documentation to subfolder
Combine the documentation for devlink into a subfolder, and provide an
index.rst file that can be used to generally describe devlink.
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
show more ...
|