ARC: Add eBPF JIT support

This will add eBPF JIT support to the 32-bit ARCv2 processors. The
implementation is qualified by running the BPF tests on a Synopsys HSDK
board with "ARC HS38 v2.1c at 500

ARC: Add eBPF JIT support

This will add eBPF JIT support to the 32-bit ARCv2 processors. The
implementation is qualified by running the BPF tests on a Synopsys HSDK
board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU.

The test_bpf.ko reports 2-10 fold improvements in execution time of its
tests. For instance:

test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS
test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS

test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS
test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS

test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS
test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS

Deployment and structure
------------------------
The related codes are added to "arch/arc/net":

- bpf_jit.h -- The interface that a back-end translator must provide
- bpf_jit_core.c -- Knows how to handle the input eBPF byte stream
- bpf_jit_arcv2.c -- The back-end code that knows the translation logic

The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance
to the whole process. Normally, the translation is done in one pass,
namely the "normal pass". In case some relocations are not known during
this pass, some data (arc_jit_data) is allocated for the next pass to
come. This possible next (and last) pass is called the "extra pass".

1. Normal pass # The necessary pass
1a. Dry run # Get the whole JIT length, epilogue offset, etc.
1b. Emit phase # Allocate memory and start emitting instructions
2. Extra pass # Only needed if there are relocations to be fixed
2a. Patch relocations

Support status
--------------
The JIT compiler supports BPF instructions up to "cpu=v4". However, it
does not yet provide support for:

- Tail calls
- Atomic operations
- 64-bit division/remainder
- BPF_PROBE_MEM* (exception table)

The result of "test_bpf" test suite on an HSDK board is:

hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf

test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed]

All the failing test cases are due to the ones that were not JIT'ed.
Categorically, they can be represented as:

.-----------.------------.-------------.
| test type | opcodes | # of cases |
|-----------+------------+-------------|
| atomic | 0xC3, 0xDB | 149 |
| div64 | 0x37, 0x3F | 22 |
| mod64 | 0x97, 0x9F | 15 |
`-----------^------------+-------------|
| (total) 186 |
`-------------'

Setup: build config
-------------------
The following configs must be set to have a working JIT test:

CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_TEST_BPF=m

The following options are not necessary for the tests module,
but are good to have:

CONFIG_DEBUG_INFO=y # prerequisite for below
CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h

CONFIG_FTRACE=y #
CONFIG_BPF_SYSCALL=y # all these options lead to
CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y
CONFIG_PERF_EVENTS=y #

Some BPF programs provide data through /sys/kernel/debug:
CONFIG_DEBUG_FS=y
arc# mount -t debugfs debugfs /sys/kernel/debug

Setup: elfutils
---------------
The libdw.{so,a} library that is used by pahole for processing
the final binary must come from elfutils 0.189 or newer. The
support for ARCv2 [1] has been added since that version.

[1]
https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7

Setup: pahole
-------------
The line below in linux/scripts/Makefile.btf must be commented out:

pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats

Or else, the build will fail:

$ make V=1
...
BTF .btf.vmlinux.bin.o
pahole -J --btf_gen_floats \
-j --lang_exclude=rust \
--skip_encoding_btf_inconsistent_proto \
--btf_gen_optimized .tmp_vmlinux.btf
Complex, interval and imaginary float types are not supported
Encountered error while encoding BTF.
...
BTFIDS vmlinux
./tools/bpf/resolve_btfids/resolve_btfids vmlinux
libbpf: failed to find '.BTF' ELF section in vmlinux
FAILED: load BTF from vmlinux: No data available

This is due to the fact that the ARC toolchains generate
"complex float" DIE entries in libgcc and at the moment, pahole
can't handle such entries.

Running the tests
-----------------
host$ scp /bld/linux/lib/test_bpf.ko arc:
arc # sysctl net.core.bpf_jit_enable=1
arc # insmod test_bpf.ko test_suite=test_bpf
...
test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS
test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed]

Acknowledgments
---------------
- Claudiu Zissulescu for his unwavering support
- Yuriy Kolerov for testing and troubleshooting
- Vladimir Isaev for the pahole workaround
- Sergey Matyukevich for paving the road by adding the interpreter support

Signed-off-by: Shahab Vahedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>

show more ...

net: make SK_MEMORY_PCPU_RESERV tunable

This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.

Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for

net: make SK_MEMORY_PCPU_RESERV tunable

This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.

Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:

"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."

sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;

If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.

Signed-off-by: Adam Li <[email protected]>
Reviewed-by: Christoph Lameter (Ampere) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: increase optmem_max default value

For many years, /proc/sys/net/core/optmem_max default value
on a 64bit kernel has been 20 KB.

Regular usage of TCP tx zerocopy needs a bit more.

Google has u

net: increase optmem_max default value

For many years, /proc/sys/net/core/optmem_max default value
on a 64bit kernel has been 20 KB.

Regular usage of TCP tx zerocopy needs a bit more.

Google has used 128KB as the default value for 7 years without
any problem.

Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

bpf, docs: Add loongarch64 as arch supporting BPF JIT

As BPF JIT support for loongarch64 was added about one year ago
with commit 5dc615520c4d ("LoongArch: Add BPF JIT support"), it
is appropriate t

bpf, docs: Add loongarch64 as arch supporting BPF JIT

As BPF JIT support for loongarch64 was added about one year ago
with commit 5dc615520c4d ("LoongArch: Add BPF JIT support"), it
is appropriate to add loongarch64 as arch supporting BPF JIT in
bpf and sysctl docs as well.

Signed-off-by: Tiezhu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>

show more ...

Documentation: net: net.core.txrehash is not specific to listening sockets

The net.core.txrehash documentation mentions this knob is for listening
sockets only, while sk_rethink_txhash can be called

Documentation: net: net.core.txrehash is not specific to listening sockets

The net.core.txrehash documentation mentions this knob is for listening
sockets only, while sk_rethink_txhash can be called on SYN and RTO
retransmits on all TCP sockets.

Remove the listening socket part.

Signed-off-by: Antoine Tenart <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>

show more ...

net: introduce default_rps_mask netns attribute

If RPS is enabled, this allows configuring a default rps
mask, which is effective since receive queue creation time.

A default RPS mask allows the sy

net: introduce default_rps_mask netns attribute

If RPS is enabled, this allows configuring a default rps
mask, which is effective since receive queue creation time.

A default RPS mask allows the system admin to ensure proper
isolation, avoiding races at network namespace or device
creation time.

The default RPS mask is initially empty, and can be
modified via a newly added sysctl entry.

Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

bpf: Use bpf_capable() instead of CAP_SYS_ADMIN for blinding decision

The full CAP_SYS_ADMIN requirement for blinding looks too strict nowadays.
These days given unprivileged BPF is disabled by defa

bpf: Use bpf_capable() instead of CAP_SYS_ADMIN for blinding decision

The full CAP_SYS_ADMIN requirement for blinding looks too strict nowadays.
These days given unprivileged BPF is disabled by default, the main users
for constant blinding coming from unprivileged in particular via cBPF -> eBPF
migration (e.g. old-style socket filters).

Signed-off-by: Yauheni Kaliuta <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]

show more ...

Documentation: sysctl: align cells in second content column

Stephen Rothwell reported htmldocs warning when merging net-next tree:

Documentation/admin-guide/sysctl/net.rst:37: WARNING: Malformed ta

Documentation: sysctl: align cells in second content column

Stephen Rothwell reported htmldocs warning when merging net-next tree:

Documentation/admin-guide/sysctl/net.rst:37: WARNING: Malformed table.
Text in column margin in table line 4.

========= =================== = ========== ==================
Directory Content Directory Content
========= =================== = ========== ==================
802 E802 protocol mptcp Multipath TCP
appletalk Appletalk protocol netfilter Network Filter
ax25 AX25 netrom NET/ROM
bridge Bridging rose X.25 PLP layer
core General parameter tipc TIPC
ethernet Ethernet protocol unix Unix domain sockets
ipv4 IP version 4 x25 X.25 protocol
ipv6 IP version 6
========= =================== = ========== ==================

The warning above is caused by cells in second "Content" column of
/proc/sys/net subdirectory table which are in column margin.

Align these cells against the column header to fix the warning.

Link: https://lore.kernel.org/linux-next/[email protected]/
Fixes: 1202cdd665315c ("Remove DECnet support from kernel")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Bagas Sanjaya <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: Fix data-races around netdev_max_backlog.

While reading netdev_max_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

While at it, we remove the unnecess

net: Fix data-races around netdev_max_backlog.

While reading netdev_max_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

While at it, we remove the unnecessary spaces in the doc.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

Remove DECnet support from kernel

DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux ker

Remove DECnet support from kernel

DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.

It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.

Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.

The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: David Ahern <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

Documentation: add a description for net.core.high_order_alloc_disable

A description is missing for the net.core.high_order_alloc_disable
option in admin-guide/sysctl/net.rst ; add it. The above sys

Documentation: add a description for net.core.high_order_alloc_disable

A description is missing for the net.core.high_order_alloc_disable
option in admin-guide/sysctl/net.rst ; add it. The above sysctl option
was introduced by commit ce27ec60648d ("net: add high_order_alloc_disable
sysctl/static key").

Thanks to Eric for running again the benchmark cited in the above
commit, showing this knob is now mostly of historical importance.

Signed-off-by: Antoine Tenart <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

Documentation: add description for net.core.gro_normal_batch

Describe it in admin-guide/sysctl/net.rst like other Network core options.
Users need to know gro_normal_batch for performance tuning.

F

Documentation: add description for net.core.gro_normal_batch

Describe it in admin-guide/sysctl/net.rst like other Network core options.
Users need to know gro_normal_batch for performance tuning.

Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs")
Reported-by: Prijesh Patel <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Reviewed-by: Edward Cree <[email protected]>
Link: https://lore.kernel.org/r/acf8a2c03b91bcde11f67ff89b6050089c0712a3.1652888963.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>

show more ...

net: add skb_defer_max sysctl

commit 68822bdf76f1 ("net: generalize skb freeing
deferral to per-cpu lists") added another per-cpu
cache of skbs. It was expected to be small,
and an IPI was forced wh

net: add skb_defer_max sysctl

commit 68822bdf76f1 ("net: generalize skb freeing
deferral to per-cpu lists") added another per-cpu
cache of skbs. It was expected to be small,
and an IPI was forced whenever the list reached 128
skbs.

We might need to be able to control more precisely
queue capacity and added latency.

An IPI is generated whenever queue reaches half capacity.

Default value of the new limit is 64.

Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

txhash: Add txrehash sysctl description

Update Documentation/admin-guide/sysctl/net.rst with txrehash usage
description.

Signed-off-by: Akhmat Karakotov <[email protected]>
Signed-off-by: David

txhash: Add txrehash sysctl description

Update Documentation/admin-guide/sysctl/net.rst with txrehash usage
description.

Signed-off-by: Akhmat Karakotov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

powerpc/bpf: Implement extended BPF on PPC32

Implement Extended Berkeley Packet Filter on Powerpc 32

Test result with test_bpf module:

test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]

R

powerpc/bpf: Implement extended BPF on PPC32

Implement Extended Berkeley Packet Filter on Powerpc 32

Test result with test_bpf module:

test_bpf: Summary: 378 PASSED, 0 FAILED, [354/366 JIT'ed]

Registers mapping:

[BPF_REG_0] = r11-r12
/* function arguments */
[BPF_REG_1] = r3-r4
[BPF_REG_2] = r5-r6
[BPF_REG_3] = r7-r8
[BPF_REG_4] = r9-r10
[BPF_REG_5] = r21-r22 (Args 9 and 10 come in via the stack)
/* non volatile registers */
[BPF_REG_6] = r23-r24
[BPF_REG_7] = r25-r26
[BPF_REG_8] = r27-r28
[BPF_REG_9] = r29-r30
/* frame pointer aka BPF_REG_10 */
[BPF_REG_FP] = r17-r18
/* eBPF jit internal registers */
[BPF_REG_AX] = r19-r20
[TMP_REG] = r31

As PPC32 doesn't have a redzone in the stack, a stack frame must always
be set in order to host at least the tail count counter.

The stack frame remains for tail calls, it is set by the first callee
and freed by the last callee.

r0 is used as temporary register as much as possible. It is referenced
directly in the code in order to avoid misusing it, because some
instructions interpret it as value 0 instead of register r0
(ex: addi, addis, stw, lwz, ...)

The following operations are not implemented:

case BPF_ALU64 | BPF_DIV | BPF_X: /* dst /= src */
case BPF_ALU64 | BPF_MOD | BPF_X: /* dst %= src */
case BPF_STX | BPF_XADD | BPF_DW: /* *(u64 *)(dst + off) += src */

The following operations are only implemented for power of two constants:

case BPF_ALU64 | BPF_MOD | BPF_K: /* dst %= imm */
case BPF_ALU64 | BPF_DIV | BPF_K: /* dst /= imm */

Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/61d8b149176ddf99e7d5cef0b6dc1598583ca202.1616430991.git.christophe.leroy@csgroup.eu

show more ...

net: change netdev_unregister_timeout_secs min value to 1

netdev_unregister_timeout_secs=0 can lead to printing the
"waiting for dev to become free" message every jiffy.
This is too frequent and unn

net: change netdev_unregister_timeout_secs min value to 1

netdev_unregister_timeout_secs=0 can lead to printing the
"waiting for dev to become free" message every jiffy.
This is too frequent and unnecessary.
Set the min value to 1 second.

Also fix the merge issue introduced by
"net: make unregister netdev warning timeout configurable":
it changed "refcnt != 1" to "refcnt".

Signed-off-by: Dmitry Vyukov <[email protected]>
Suggested-by: Eric Dumazet <[email protected]>
Fixes: 5aa3afe107d9 ("net: make unregister netdev warning timeout configurable")
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

net: make unregister netdev warning timeout configurable

netdev_wait_allrefs() issues a warning if refcount does not drop to 0
after 10 seconds. While 10 second wait generally should not happen
unde

net: make unregister netdev warning timeout configurable

netdev_wait_allrefs() issues a warning if refcount does not drop to 0
after 10 seconds. While 10 second wait generally should not happen
under normal workload in normal environment, it seems to fire falsely
very often during fuzzing and/or in qemu emulation (~10x slower).
At least it's not possible to understand if it's really a false
positive or not. Automated testing generally bumps all timeouts
to very high values to avoid flake failures.
Add net.core.netdev_unregister_timeout_secs sysctl to make
the timeout configurable for automated testing systems.
Lowering the timeout may also be useful for e.g. manual bisection.
The default value matches the current behavior.

Signed-off-by: Dmitry Vyukov <[email protected]>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=211877
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David S. Miller <[email protected]>

show more ...

docs: admin-guide: net.rst: add a missing blank line

There's a missing blank line after a literal block, which
causes this warning:

Documentation/admin-guide/sysctl/net.rst:303: WARNING: Literal b

docs: admin-guide: net.rst: add a missing blank line

There's a missing blank line after a literal block, which
causes this warning:

Documentation/admin-guide/sysctl/net.rst:303: WARNING: Literal block ends without a blank line; unexpected unindent.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/b2545be4a4c71269d10278b5990c3e06c4b65f84.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <[email protected]>

show more ...

net: add option to not create fall-back tunnels in root-ns as well

The sysctl that was added earlier by commit 79134e6ce2c ("net: do
not create fallback tunnels for non-default namespaces") to crea

net: add option to not create fall-back tunnels in root-ns as well

The sysctl that was added earlier by commit 79134e6ce2c ("net: do
not create fallback tunnels for non-default namespaces") to create
fall-back only in root-ns. This patch enhances that behavior to provide
option not to create fallback tunnels in root-ns as well. Since modules
that create fallback tunnels could be built-in and setting the sysctl
value after booting is pointless, so added a kernel cmdline options to
change this default. The default setting is preseved for backward
compatibility. The kernel command line option of fb_tunnels=initns will
set the sysctl value to 1 and will create fallback tunnels only in initns
while kernel cmdline fb_tunnels=none will set the sysctl value to 2 and
fallback tunnels are skipped in every netns.

Signed-off-by: Mahesh Bandewar <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Maciej Zenczykowski <[email protected]>
Cc: Jian Yang <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

netns: enable to inherit devconf from current netns

The goal is to be able to inherit the initial devconf parameters from the
current netns, ie the netns where this new netns has been created.

This

netns: enable to inherit devconf from current netns

The goal is to be able to inherit the initial devconf parameters from the
current netns, ie the netns where this new netns has been created.

This is useful in a containers environment where /proc/sys is read only.
For example, if a pod is created with specifics devconf parameters and has
the capability to create netns, the user expects to get the same parameters
than his 'init_net', which is not the real init_net in this case.

Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

docs: networking: convert ipvs-sysctl.txt to ReST

- add SPDX header;
- add a document title;
- mark lists as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank

docs: networking: convert ipvs-sysctl.txt to ReST

- add SPDX header;
- add a document title;
- mark lists as such;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

docs: networking: convert ip-sysctl.txt to ReST

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- mark lists as such;
- mark tables a

docs: networking: convert ip-sysctl.txt to ReST

- add SPDX header;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- mark lists as such;
- mark tables as such;
- use footnote markup;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

bpf, doc: Add BPF JIT for RV32G to BPF documentation

Update filter.txt and admin-guide to mention the BPF JIT for RV32G.

Co-developed-by: Xi Wang <[email protected]>
Signed-off-by: Xi Wang <xi.wang

bpf, doc: Add BPF JIT for RV32G to BPF documentation

Update filter.txt and admin-guide to mention the BPF JIT for RV32G.

Co-developed-by: Xi Wang <[email protected]>
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Luke Nelson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Björn Töpel <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]

show more ...

docs: admin-guide: remove references to IPX and token-ring

Both IPX and TR have not been supported for a while now.
Remove them from the /proc/sys/net documentation.

Signed-off-by: Stephen Hemminge

docs: admin-guide: remove references to IPX and token-ring

Both IPX and TR have not been supported for a while now.
Remove them from the /proc/sys/net documentation.

Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

show more ...

docs: admin-guide: move sysctl directory to it

The stuff under sysctl describes /sys interface from userspace
point of view. So, add it to the admin-guide and remove the
:orphan: from its index file

docs: admin-guide: move sysctl directory to it

The stuff under sysctl describes /sys interface from userspace
point of view. So, add it to the admin-guide and remove the
:orphan: from its index file.

Signed-off-by: Mauro Carvalho Chehab <[email protected]>

show more ...