Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

MFC: When ``ppp -direct'' is invoked by a program that uses pipe(2) to
create stdin and stdout, don't blindly try to use stdin as a bi-directional
channel. Instead, detect the pipe and set

MFC: When ``ppp -direct'' is invoked by a program that uses pipe(2) to
create stdin and stdout, don't blindly try to use stdin as a bi-directional
channel. Instead, detect the pipe and set up a special exec handler
that indirects write() calls through stdout.

This fixes the problem where ``set device "!ssh -e none host ppp
-direct label"'' no longer works with an openssh-5.2 server side as
that version of openssh ignores the USE_PIPES config setting and
*always* uses pipes (rather than socketpair) for stdin/stdout channels.

Approved by: re (kib)

show more ...

When ``ppp -direct'' is invoked by a program that uses pipe(2) to
create stdin and stdout, don't blindly try to use stdin as a bi-directional
channel. Instead, detect the pipe and set up a special e

When ``ppp -direct'' is invoked by a program that uses pipe(2) to
create stdin and stdout, don't blindly try to use stdin as a bi-directional
channel. Instead, detect the pipe and set up a special exec handler
that indirects write() calls through stdout.

This fixes the problem where ``set device "!ssh -e none host ppp
-direct label"'' no longer works with an openssh-5.2 server side as
that version of openssh ignores the USE_PIPES config setting and
*always* uses pipes (rather than socketpair) for stdin/stdout channels.

MFC after: 3 days

show more ...

Make ppp WARNS=5 clean

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SES

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.

When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).

This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.

Prompted by: lsz8425 <[email protected]>

show more ...

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES''

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.

Make the Makefile a little more sane WRT RELEASE_CRUNCH.

show more ...

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the pp

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the ppp version number.

Sponsored by: Monzoon Networks AG and FreeBSD Services Limited

show more ...

Make -DNOSUID (or -DPPP_NOSUID) possible to build ppp without SUID
capabilities.

Correct PPPoE in multi-link mode
Submitted by: [email protected]

Remove an unused variable

Honour ``set speed sync'' and ``set device !program'' when
used together by creating a SOCK_DGRAM socketpair() between
the processes.

Be polite when closing !program links and send a HUP to the
proc

Honour ``set speed sync'' and ``set device !program'' when
used together by creating a SOCK_DGRAM socketpair() between
the processes.

Be polite when closing !program links and send a HUP to the
process. This makes ssh tunnels over unreliable media (such
as via httptunnel) reconnect properly.

show more ...

Do some vfork() trickery so that the parent can determine
if the childs exec() has succeeded or failed by taking advantage
of the fact that both processes share the same memory.

FWIW:
I tried to i

Do some vfork() trickery so that the parent can determine
if the childs exec() has succeeded or failed by taking advantage
of the fact that both processes share the same memory.

FWIW:
I tried to implement this by doing a pipe(), setting the
write desciptors close-on-exec flag in the child and writing
errno to the descriptor if the exec() fails. The parent can
then ``if (read()) got errno else exec worked''.

This didn't work though - the child could write() to fd[1] on
exec failure, but the parent got 0 trying to read() from fd[0] !
Is this a bug in execve() ?

show more ...

Correct some typos introduced in the descriptor -> fdescriptor change.

To avoid namespace polution in NetBSD:

``struct descriptor'' -> ``struct fdescriptor''

Add a few missing #includes

Correct usages of getuid() and geteuid()

Pointed out by: billf

Don't allowt '#' as a comment when it's embedded in quotes:

set something "xxx yyy # zzz" aaa

shouldn't be interpreted as

set something "xxx yyy" aaa

Don't munge ``set dial|login|logout|hangup'' arguments before
ExpandString() has a chance to do its own substitutions.

Notice and warn about unterminated quoted strings in commands.
The entire command is ignored if the syntax is invalid...

Change ``set cd'' so that its default value is device specific. The
default is still 1 second for ttys, but is now 6 seconds for i4b (ISDN)
devices and 5 seconds for ethernet (PPPoE) devices.

Support PPPoE

Help (lots) from: julian, archie
Facilities from: [email protected]

Back out the bogus #ifdef __NetBSD__ #include <signal.h> lines.
The original report was due to a mis-installation of the NetBS
header files :-/

Submitted by: Kazuyoshi Kato <[email protected]>

NetBSD has moved ``extern int errno;'' to signal.h :-/

Submitted by: Kazuyoshi Kato <[email protected]>