sys: Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

powerpc kernel config: clean up whitespace

Most options in kernel config files use "options<space><tab>OPTION".
This allows the option to be commented out without shifting columns.
A few options had

powerpc kernel config: clean up whitespace

Most options in kernel config files use "options<space><tab>OPTION".
This allows the option to be commented out without shifting columns.
A few options had two tabs, and some had spaces. Make them consistent.

show more ...

Restore PPS_SYNC in NOTES

This partially reverts e81e77c5a055, leaving the option both in
GENERICs on amd64/arm64/arm, and in global NOTES file. Apparently
this better matches existing practice, wh

Restore PPS_SYNC in NOTES

This partially reverts e81e77c5a055, leaving the option both in
GENERICs on amd64/arm64/arm, and in global NOTES file. Apparently
this better matches existing practice, where we do not try to hard
to make LINT and GENERIC complimentary.

Requested and reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week

show more ...

Enable PPS_SYNC on amd64, arm64 and armv7

Remove the option from NOTES/LINT, and add to NOTES for powerpc and
riscv.

PR: 259036
Requested by: John Hay <[email protected]>
Discussed with: ian, imp
S

Enable PPS_SYNC on amd64, arm64 and armv7

Remove the option from NOTES/LINT, and add to NOTES for powerpc and
riscv.

PR: 259036
Requested by: John Hay <[email protected]>
Discussed with: ian, imp
Sponsored by: The FreeBSD Foundation
MFC after: 1 week

show more ...

Fix LINT: Add backlight to NOTES

[PowerPC64LE] Work around qemu TCG bug in mtmsrd emulation.

The TCG implementation of mtmsrd in qemu blindly copies the entire register
to the MSR, instead of the specific bit positions listed in th

[PowerPC64LE] Work around qemu TCG bug in mtmsrd emulation.

The TCG implementation of mtmsrd in qemu blindly copies the entire register
to the MSR, instead of the specific bit positions listed in the ISA.

This means that qemu will prematurely switch endian out from under the
running code instead of waiting for the rfid, causing an immediate trap
as it attempts to interpret the next instruction in the wrong endianness.

To work around this, ensure PSL_LE is still set before doing the mtmsrd.

In the future, we may wish to just turn off translation and unconditionally
use rfid to switch to the ofmsr instead of quasi-switching to the ofmsr.

Add a new platform option so this can be disabled. (And so that we can
conditonalize additional QEMU-specific hacks in the platform code.)

Sponsored by: Tag1 Consulting, Inc.

show more ...

powerpc: Axe PPC4xx support.

Summary:
The support was added almost a decade ago, and never completed. Just axe
it. It was also inadvertently broken 5 years ago, and nobody noticed.

Reviewed by: b

powerpc: Axe PPC4xx support.

Summary:
The support was added almost a decade ago, and never completed. Just axe
it. It was also inadvertently broken 5 years ago, and nobody noticed.

Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D23753

show more ...

Finish removal of bktr

Remove the old ioctl .h files
Remove copying/linking ioctl .h files in instasllworld
Remove bktr from lint
Add now-removed files with ObsoleteFiles

Fix powerpc LINT build

tcpratelimit isn't supported as there's now atomic_add_64, so add it to the exclusion list
Add comment for why PPC_PROBE_CHIPSET is on the list
Remove UKBD_DFLT_KEYMAP now tha

Fix powerpc LINT build

tcpratelimit isn't supported as there's now atomic_add_64, so add it to the exclusion list
Add comment for why PPC_PROBE_CHIPSET is on the list
Remove UKBD_DFLT_KEYMAP now that ukbd works on all platforms.

show more ...

Floppy driver really only works on x86

Move the floppy driver to the x86 specific notes file.

Reviewed by: jhb, manu, jhibbits, emaste
Differential Revision: https://reviews.freebsd.org/D21208

Move sc out of the global file

x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it

Move sc out of the global file

x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.

All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.

Reviewed by: jhb (earlier version), manu (earlier version), jhibbits
Differential Revision: https://reviews.freebsd.org/D21233

show more ...

FCP-101: Remove bm(4).

Relnotes: yes
FCP: https://github.com/freebsd/fcp/blob/master/fcp-0101.md
Reviewed by: jhb, imp
Differential Revision: https://reviews.freebsd.org/D20230

Move mpr/mps drivers from per-arch NOTES files into the MI notes
file. They are in more arches they they aren't. Add appropriate
nodevice directives in powerpc and arm.

Add a driver for the Chelsio T6 crypto accelerator engine.

The ccr(4) driver supports use of the crypto accelerator engine on
Chelsio T6 NICs in "lookaside" mode via the opencrypto framework.

Curre

Add a driver for the Chelsio T6 crypto accelerator engine.

The ccr(4) driver supports use of the crypto accelerator engine on
Chelsio T6 NICs in "lookaside" mode via the opencrypto framework.

Currently, the driver supports AES-CBC, AES-CTR, AES-GCM, and AES-XTS
cipher algorithms as well as the SHA1-HMAC, SHA2-256-HMAC, SHA2-384-HMAC,
and SHA2-512-HMAC authentication algorithms. The driver also supports
chaining one of AES-CBC, AES-CTR, or AES-XTS with an authentication
algorithm for encrypt-then-authenticate operations.

Note that this driver is still under active development and testing and
may not yet be ready for production use. It does pass the tests in
tests/sys/opencrypto with the exception that the AES-GCM implementation
in the driver does not yet support requests with a zero byte payload.

To use this driver currently, the "uwire" configuration must be used
along with explicitly enabling support for lookaside crypto capabilities
in the cxgbe(4) driver. These can be done by setting the following
tunables before loading the cxgbe(4) driver:

hw.cxgbe.config_file=uwire
hw.cxgbe.cryptocaps_allowed=-1

MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D10763

show more ...

Chelsio T4/T5 VF driver.

The cxgbev/cxlv driver supports Virtual Function devices for Chelsio
T4 and T4 adapters. The VF devices share most of their code with the
existing PF4 driver (cxgbe/cxl) an

Chelsio T4/T5 VF driver.

The cxgbev/cxlv driver supports Virtual Function devices for Chelsio
T4 and T4 adapters. The VF devices share most of their code with the
existing PF4 driver (cxgbe/cxl) and as such the VF device driver
currently depends on the PF4 driver.

Similar to the cxgbe/cxl drivers, the VF driver includes a t4vf/t5vf
PCI device driver that attaches to the VF device. It then creates
child cxgbev/cxlv devices representing ports assigned to the VF.
By default, the PF driver assigns a single port to each VF.

t4vf_hw.c contains VF-specific routines from the shared code used to
fetch VF-specific parameters from the firmware.

t4_vf.c contains the VF-specific PCI device driver and includes its
own attach routine.

VF devices are required to use a different firmware request when
transmitting packets (which in turn requires a different CPL message
to encapsulate messages). This alternate firmware request does not
permit chaining multiple packets in a single message, so each packet
results in a firmware request. In addition, the different CPL message
requires more detailed information when enabling hardware checksums,
so parse_pkt() on VF devices must examine L2 and L3 headers for all
packets (not just TSO packets) for VF devices. Finally, L2 checksums
on non-UDP/non-TCP packets do not work reliably (the firmware trashes
the IPv4 fragment field), so IPv4 checksums for such packets are
calculated in software.

Most of the other changes in the non-VF-specific code are to expose
various variables and functions private to the PF driver so that they
can be used by the VF driver.

Note that a limited subset of cxgbetool functions are supported on VF
devices including register dumps, scheduler classes, and clearing of
statistics. In addition, TOE is not supported on VF devices, only for
the PF interfaces.

Reviewed by: np
MFC after: 2 months
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7599

show more ...

Move 'device pci' for the PCI bus driver to the MI NOTES file.

The PCI bus was already listed in all of the MD NOTES files and the
driver should at least compile on all platforms.

Remove vestiges of IEEE-488/GPIB drivers removed in r276214.

Implement the lockstat provider using SDT(9) instead of the custom provider
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support wh

Implement the lockstat provider using SDT(9) instead of the custom provider
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.

Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993

show more ...

Allow DTrace to be compiled-in to the kernel.
This will require for AArch64 as we dont have modules yet.

Sponsored by: HEIF5
Sponsored by: ARM Ltd.
Differential Revision: https://reviews.freebsd.org

Allow DTrace to be compiled-in to the kernel.
This will require for AArch64 as we dont have modules yet.

Sponsored by: HEIF5
Sponsored by: ARM Ltd.
Differential Revision: https://reviews.freebsd.org/D1997

show more ...

Remove FreeBSD/wii.

This port failed to gain traction and probably only a couple Wii consoles
ran FreeBSD all the way to single user mode with an md(4). IPC
support was never implemented, so it was

Remove FreeBSD/wii.

This port failed to gain traction and probably only a couple Wii consoles
ran FreeBSD all the way to single user mode with an md(4). IPC
support was never implemented, so it was impossible to use any peripheral

Any further development, if any, will happen at https://github.com/rpaulo/wii.

Discussed with: nathanw (a long time ago), jhibbits

show more ...

Plug cxgbe(4) back into !powerpc && !arm builds, instead of building it
on amd64 only.

Move the adm1030 driver to the proper location, and rename it.

For compatibility, 'device windtunnel' is still supported, but one should use
'device adm1030' instead, and this has been updated in GE

Move the adm1030 driver to the proper location, and rename it.

For compatibility, 'device windtunnel' is still supported, but one should use
'device adm1030' instead, and this has been updated in GENERIC and NOTES.

show more ...

In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.

Add "options WII".

Add the ds1631 temperature driver.