sys: Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

Fix some modules to export more used symbols

and remove non-present symbols that are now reported by kmod_syms.awk.

Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differ

Fix some modules to export more used symbols

and remove non-present symbols that are now reported by kmod_syms.awk.

Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32878

show more ...

ixl(4): Add FW recovery mode support and other things

Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.

Major changes:

- Extract iflib specific functions from ixl_pf_mai

ixl(4): Add FW recovery mode support and other things

Update the iflib version of ixl driver based on the OOT version ixl-1.11.29.

Major changes:

- Extract iflib specific functions from ixl_pf_main.c to ixl_pf_iflib.c
to simplify code sharing between legacy and iflib version of driver

- Add support for most recent FW API version (1.10), which extends FW
LLDP Agent control by user to X722 devices

- Improve handling of device global reset

- Add support for the FW recovery mode

- Use virtchnl function to validate virtual channel messages instead of
using separate checks

- Fix MAC/VLAN filters accounting

Submitted by: Krzysztof Galazka <[email protected]>
Reviewed by: erj@
Tested by: Jeffrey Pieper <[email protected]>
MFC after: 1 week
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24564

show more ...

ixl/iavf(4): Change ixlv to iavf and update it to use iflib(9)

Finishes the conversion of the 40Gb Intel Ethernet drivers to iflib(9) for
FreeBSD 12.0, and fixes numerous bugs in both ixl(4) and iav

ixl/iavf(4): Change ixlv to iavf and update it to use iflib(9)

Finishes the conversion of the 40Gb Intel Ethernet drivers to iflib(9) for
FreeBSD 12.0, and fixes numerous bugs in both ixl(4) and iavf(4).

This commit also re-adds the VF driver to GENERIC since it now compiles and
functions.

The VF driver name was changed from ixlv(4) to iavf(4) because the VF driver is
now intended to be used with future products, not just with Fortville/Fort Park
VFs.

A man page update that documents these drivers is forthcoming in a separate
commit.

Reviewed by: sbruno@, kbowling@
Tested by: [email protected]
Approved by: re (gjb@)
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D16429

show more ...

ixl(4): Update to use iflib

Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.

The driver currently isn't completely po

ixl(4): Update to use iflib

Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.

The driver currently isn't completely ported; features that are missing:

- VF driver (ixlv)
- SR-IOV host support
- RDMA support

The plan is to have these re-added to the driver before the next FreeBSD release.

Reviewed by: gallatin@
Contributions by: gallatin@, mmacy@, [email protected]
Tested by: [email protected]
MFC after: 1 month
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15577

show more ...

ixl(4): Update to 1.9.9-k

Refresh upstream driver before impending conversion to iflib.

Major changes:

- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to di

ixl(4): Update to 1.9.9-k

Refresh upstream driver before impending conversion to iflib.

Major changes:

- Support for descriptor writeback mode (required by ixlv(4) for AVF support)
- Ability to disable firmware LLDP agent by user (PR 221530)
- Fix for TX queue hang when using TSO (PR 221919)
- Separate descriptor ring sizes for TX and RX rings

PR: 221530, 221919
Submitted by: Krzysztof Galazka <[email protected]>
Reviewed by: #IntelNetworking
MFC after: 1 day
Relnotes: Yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D14985

show more ...

Fix kldload of if_ixl without PCI_IOV kernel option.

This also avoids compiling in pci_iov support into the kernel if_ixoif
the PCI_IOV option is disabled.

Reviewed by: rstone
Sponsored by: Dell EM

Fix kldload of if_ixl without PCI_IOV kernel option.

This also avoids compiling in pci_iov support into the kernel if_ixoif
the PCI_IOV option is disabled.

Reviewed by: rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11573

show more ...

sys/modules: normalize .CURDIR-relative paths to SRCTOP

This simplifies make output/logic

Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon

ixl(4): Update to 1.7.12-k

Refresh upstream driver before impending conversion to iflib.

Major new features:

- Support for Fortville-based 25G adapters
- Support for I2C reads/writes

(To prevent

ixl(4): Update to 1.7.12-k

Refresh upstream driver before impending conversion to iflib.

Major new features:

- Support for Fortville-based 25G adapters
- Support for I2C reads/writes

(To prevent getting or sending corrupt data, you should set
dev.ixl.0.debug.disable_fw_link_management=1 when using I2C
[this will disable link!], then set it to 0 when done. The driver implements
the SIOCGI2C ioctl, so ifconfig -v works for reading I2C data,
but there are read_i2c and write_i2c sysctls under the .debug sysctl tree
[the latter being useful for upper page support in QSFP+]).

- Addition of an iWARP client interface (so the future iWARP driver for
X722 devices can communicate with the base driver).
- Compiling this option in is enabled by default, with "options IXL_IW" in
GENERIC.

Differential Revision: https://reviews.freebsd.org/D9227
Reviewed by: sbruno
MFC after: 2 weeks
Sponsored by: Intel Corporation

show more ...

ixl(4): Update to ixl-1.6.6-k.

Submitted by: erj
Reviewed by: [email protected]
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D7391

opt_bdg.h was removed in r150636.

MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division

Update SW4 to the Intel ixl/ixlv drivers. This is primarily a shared
code update, with supporting changes in the CORE. Changes for the extended
media types, VF driver has virtual channel protocol cha

Update SW4 to the Intel ixl/ixlv drivers. This is primarily a shared
code update, with supporting changes in the CORE. Changes for the extended
media types, VF driver has virtual channel protocol changes, and some
register use corrections. This software change should be coordinated with
Firmware updates to your hardware, contact your support channels for that.

MFC after: 1 week

show more ...

Create a separate kobj interface for leaf-driver PCI IOV methods.

Leaf drivers should not import the PCI bus interface to add IOV handling.
Instead, move the IOV client methods to a separate kobj in

Create a separate kobj interface for leaf-driver PCI IOV methods.

Leaf drivers should not import the PCI bus interface to add IOV handling.
Instead, move the IOV client methods to a separate kobj interface.

Differential Revision: https://reviews.freebsd.org/D2584
Reviewed by: rstone

show more ...

Intel I40E driver updates:
if_ixl to version 1.3.0, if_ixlv to version 1.2.0
- Major change in both drivers is to add RSS support
- In ixl fix some interface speed related issues, dual
speed wa

Intel I40E driver updates:
if_ixl to version 1.3.0, if_ixlv to version 1.2.0
- Major change in both drivers is to add RSS support
- In ixl fix some interface speed related issues, dual
speed was not changing correctly, KR/X media was not
displaying correctly (this has a workaround until a
more robust media handling is in place)
- Add a warning when using Dell NPAR and the speed is
less than 10G
- Wrap a queue hung message in IXL_DEBUG, as it is non-fatal,
and without tuning can display excessively

MFC after: 1 week

show more ...

Update to the Intel Base driver for the Intel XL710 Ethernet Controller Family
- It was decided to change the driver name to if_ixl for FreeBSD
- This release adds the VF Driver to the tree, it can

Update to the Intel Base driver for the Intel XL710 Ethernet Controller Family
- It was decided to change the driver name to if_ixl for FreeBSD
- This release adds the VF Driver to the tree, it can be built into
the kernel or as the if_ixlv module
- The VF driver is independent for the first time, this will be
desireable when full SRIOV capability is added to the OS.
- Thanks to my new coworker Eric Joyner for his superb work in
both the core and vf driver code.

Enjoy everyone!

Submitted by: [email protected] and [email protected]
MFC after: 3 days (hoping to make 10.1)

show more ...