kern: Remove leftover saf1761otg bits

Almost all code related to the saf1761 driver was removed in commit
44796b7e822e, except for two small bits related to saf1761otg support.
This patch completes

kern: Remove leftover saf1761otg bits

Almost all code related to the saf1761 driver was removed in commit
44796b7e822e, except for two small bits related to saf1761otg support.
This patch completes the removal.

PR: 279302
Signed-off-by: Joshua Kinard <[email protected]>
Reviewed by: mhorne
MFC after: 3 days
Fixes: 44796b7e822e ("mips: remove saf1761")

(cherry picked from commit 80828c6fab0292b5c5a34a63558d837cb9308fbd)

show more ...

sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

usb(4): Make the enumeration thread nice time a variable.

Depends on "options USB_DEBUG".

Suggested by: koobs@
MFC after: 1 week
Sponsored by: NVIDIA Networking

usb(4): Make sure the enumeration thread doesn't loop too fast.

MFC after: 1 week
Sponsored by: NVIDIA Networking

usb: Remove unused devclass arguments to DRIVER_MODULE.

Create wrapper for Giant taken for newbus

Create a wrapper for newbus to take giant and for busses to take it too.
bus_topo_lock() should be called before interacting with newbus routines
and unlock

Create wrapper for Giant taken for newbus

Create a wrapper for newbus to take giant and for busses to take it too.
bus_topo_lock() should be called before interacting with newbus routines
and unlocked with bus_topo_unlock(). If you need the topology lock for
some reason, bus_topo_mtx() will provide that.

Sponsored by: Netflix
Reviewed by: mav
Differential Revision: https://reviews.freebsd.org/D31831

show more ...

usb: clean up empty lines in .c and .h files

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marke

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632

show more ...

Remove Atmel AT91RM9200 and AT91SAM9 support.

The last known robust version of this code base was FreeBSD 8.2. There
are no users of this on current, and all users of it have abandoned
this platform

Remove Atmel AT91RM9200 and AT91SAM9 support.

The last known robust version of this code base was FreeBSD 8.2. There
are no users of this on current, and all users of it have abandoned
this platform or are in legacy mode with a prior version of FreeBSD.

All known users on arm@ approved this removal, and there were no
objections.

Differential Revision: https://reviews.freebsd.org/D16312

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Improve the realtime properties of USB transfers for embedded systems
like RPI-B and RPI-2.

Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable l

Improve the realtime properties of USB transfers for embedded systems
like RPI-B and RPI-2.

Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.

Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.

MFC after: 2 weeks

show more ...

Resolve a special case deadlock: When two or more threads are
simultaneously detaching kernel drivers on the same USB device we can
get stuck in the "usb_wait_pending_ref_locked()" function because t

Resolve a special case deadlock: When two or more threads are
simultaneously detaching kernel drivers on the same USB device we can
get stuck in the "usb_wait_pending_ref_locked()" function because the
conditions needed for allowing detach are not met. The "destroy_dev()"
function waits for all system calls involving the given character
device to return. Character device system calls may lock the USB
enumeration lock, which is also held when "destroy_dev()" is
called. This can sometimes lead to a deadlock not noticed by
WITNESS. The current solution is to ensure the calling thread is the
only one holding the USB enumeration lock and prevent other threads
from getting refs while a USB device detach is ongoing. This turned
out not to be sufficient. To solve this deadlock we could use
"destroy_dev_sched()" to schedule the device destruction in the
background, but then we don't know when it is safe to free() the
private data of the character device. Instead a callback function is
executed by the USB explore process to kill off any leftover USB
character devices synchronously after the USB device explore code is
finished and the USB enumeration lock is no longer locked. This makes
porting easier and also ensures us that character devices must
eventually go away after a USB device detach.

While at it ensure that "flag_iserror" is only written when "priv_mtx"
is locked, which is protecting it.

MFC after: 5 days

show more ...

Add 64-bit DMA support in the XHCI controller driver.
- Fix some comments and whitespace while at it.

MFC after: 1 month
Submitted by: marius@

Make a bunch of USB debug SYSCTLs tunable, so that their value(s) can
be set before the USB device(s) are probed.

Refine support for disabling USB enumeration to allow device detach
and suspend and resume of existing devices.

MFC after: 2 weeks

Add support for disabling USB enumeration in general or on selected
USB HUBs.

MFC after: 2 weeks

Rename driver name a bit to avoid unit number confusion in dmesg.

MFC after: 3 days

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

show more ...

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statica

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

Avoid the USB device disconnected and controller shutdown clutter on system
shutdown by putting the former under !rebooting and turning the latter into
debug messages.

Reviewed by: hps
MFC after: 1

Avoid the USB device disconnected and controller shutdown clutter on system
shutdown by putting the former under !rebooting and turning the latter into
debug messages.

Reviewed by: hps
MFC after: 1 week
Sponsored by: Bally Wulff Games & Entertainment GmbH

show more ...

Resolve a deadlock setting the USB configuration index from userspace
on USB HUBs by moving the code into the USB explore threads. The
deadlock happens because child devices of the USB HUB don't have

Resolve a deadlock setting the USB configuration index from userspace
on USB HUBs by moving the code into the USB explore threads. The
deadlock happens because child devices of the USB HUB don't have the
expected reference count when called from outside the explore
thread. Only the HUB device itself, which the IOCTL interface locks,
gets the correct reference count.

MFC after: 3 days

show more ...

Make WITNESS happy by giving USB mutexes different names.

Reported by: trociny @
MFC after: 3 days

Hook the ISP/SAF1761 driver into MIPS kernel builds.
- Update FDT file for BERI DE4 boards.
- Add needed kernel configuration keywords.
- Rename module to saf1761otg so that the device unit number do

Hook the ISP/SAF1761 driver into MIPS kernel builds.
- Update FDT file for BERI DE4 boards.
- Add needed kernel configuration keywords.
- Rename module to saf1761otg so that the device unit number does not
interfere with the hardware ID in dmesg.

Sponsored by: DARPA, AFRL

show more ...