sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

arm: Catch up with Samsung S3C2xx0 code removal

The code backing these uart_class was removed 7 years ago in
4648ee952520.

Sponsored by: Netflix

uart: Improve console specification parsing

Print warning when we can't parse a console specification (this may
not appear on the console, but will appear in dmesg).

Also, accept key:value and key=

uart: Improve console specification parsing

Print warning when we can't parse a console specification (this may
not appear on the console, but will appear in dmesg).

Also, accept key:value and key=value. There's no reason not to
and it makes this more forgiving of mistakes.

Reviewed by: rpokala@
Differential Revision: https://reviews.freebsd.org/D28168

show more ...

scc(4)/uart(4): Remove obsolete support for Siemens SAB 82532

It's no longer used since 58aa35d42975c298ca0adba705c042596303c9f5
and r357455 respectively.

Add busy detect quirk to list of console options

This change allows one to set the busy_detect flag
required by the synopsys UART at the loader prompt.
This is needed by the EPYC 3000 SoC.

This wil

Add busy detect quirk to list of console options

This change allows one to set the busy_detect flag
required by the synopsys UART at the loader prompt.
This is needed by the EPYC 3000 SoC.

This will give users a working console up to the point where getty is required:
hw.uart.console="mm:0xfedc9000,rs:2,bd:1"

Reviewed by: imp
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D16399

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Remove slightly used const values that can be replaced with nitems().

Suggested by: jhb

Move the uart_class definitions and fdt compat data into the individual
uart implementations, and export them using the new linker-set mechanism.

Differential Revision: https://reviews.freebsd.org/D

Move the uart_class definitions and fdt compat data into the individual
uart implementations, and export them using the new linker-set mechanism.

Differential Revision: https://reviews.freebsd.org/D1993
Submitted by: Michal Meloun

show more ...

Drop __DECONST as well as few fixes of style(9).

Phabric: D1012
Suggested by: mjg, jhb
Reviewed by: mjg, jhb
Sponsored by: QNAP Systems Inc.

Fix a leaked Storage Variable.

Phabric: D981
Submitted by: myself
Reported by: Coverity
CID: 1248848
Reworked by: kevlo
Reviewed by: marcel, davide, ray, kevlo
Approved by: marcel, kevlo

Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc sy

Follow up to r225617. In order to maximize the re-usability of kernel code
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.

Submitted by: kmacy
Tested by: make universe

show more ...

Teach UART to attach Exynos/s3/s5 class driver.

Submitted by: Ruslan Bukin <[email protected]>
Reviewed by: gonzo

Build uart_dev_lpc.c on arm only. This fixes pc98 build.

Merging of projects/armv6, part 8

r235162:

Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250
board.

Peripherals currently supported:
- Serial ports
- Interrupt contr

Merging of projects/armv6, part 8

r235162:

Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250
board.

Peripherals currently supported:
- Serial ports
- Interrupt controller
- Timers
- Ethernet
- USB host
- Framebuffer (in conjunction with SSD1289 LCD controller)
- RTC
- SPI
- GPIO

Submitted by: Jakub Wojciech Klama <[email protected]>

show more ...

Replace __const by const in all non-contributed source code.

As C1X is close to being released, there is no need to wrap around a
feature that is already part of C90. Most of these files already use

Replace __const by const in all non-contributed source code.

As C1X is close to being released, there is no need to wrap around a
feature that is already part of C90. Most of these files already use
`const' in different placed as well.

show more ...

Fix typos.

PR: bin/148894
Submitted by: olgeni

Allow specifications that lack an I/O port or memory mapped I/O
address when the UART class doesn't need it. A class doesn't need
it when the I/O range is 0.

This makes the L1 console work with the

Allow specifications that lack an I/O port or memory mapped I/O
address when the UART class doesn't need it. A class doesn't need
it when the I/O range is 0.

This makes the L1 console work with the following specification:
set hw.uart.console="dt:sgisn"

show more ...

Add minimal support for SGI Altix l1 console -- a SAL-based character
device. This may not be here to stay, because it's not a real serial
device. Then again, who cares?

Don't expose the uart_ops structure directly, but instead have
it obtained through the uart_class structure. This allows us
to declare the uart_class structure as weak and as such allows
us to refere

Don't expose the uart_ops structure directly, but instead have
it obtained through the uart_class structure. This allows us
to declare the uart_class structure as weak and as such allows
us to reference it even when it's not compiled-in.
It also allows is to get the uart_ops structure by name, which
makes it possible to implement the dt tag handling in uart_getenv().
The side-effect of all this is that we're using the uart_class
structure more consistently which means that we now also have
access to the size of the bus space block needed by the hardware
when we map the bus space, eliminating any hardcoding.

show more ...

Make uart_getenv() not be ns8250 dependent. This will allow, in the future,
compilation of kernels without ns8250 support but using the uart framework.
These kernels will be for machines where size

Make uart_getenv() not be ns8250 dependent. This will allow, in the future,
compilation of kernels without ns8250 support but using the uart framework.
These kernels will be for machines where size matters more, so including code
that can never be executed is undesriable...

show more ...

Start each of the license/copyright comments with /*-, minor shuffle of lines

Make sure the baudrate specified with the BR tag is somewhat sane.
A baudrate we consider insane is silently replaced with 0. When the
baudrate is 0, we will not try to program the hardware. Instead

Make sure the baudrate specified with the BR tag is somewhat sane.
A baudrate we consider insane is silently replaced with 0. When the
baudrate is 0, we will not try to program the hardware. Instead we
leave the communication speed unaltered, maximizing the chance to
have a working console. Obviously this means we allow specifying a
0 baudrate for exactly that purpose.

show more ...

Fix braino in previous commit: getenv() can return NULL.

Introduce the hw.uart.console and hw.uart.dbgport environment variables
to select a serial console and debug port (resp). On ia64 these replace
the use of hints completely and take precedence over hi

Introduce the hw.uart.console and hw.uart.dbgport environment variables
to select a serial console and debug port (resp). On ia64 these replace
the use of hints completely and take precedence over hints on alpha,
amd64 and i386. On sparc64 these variables are not yet recognised.

The reasons for introducing these variables are:
1. Hints have side-effects. They reserve the unit number for use by
isa or acpi devices and therefore cannot be used to select a pci
device. Also, the use of a unit number to select a device prior
to bus enumeration is nonsense. The new variables have no side-
effects and are not based on unit numbers.
2. Hints don't have the expression power to allow the sysadmin to
select UARTs that are not legacy PC devices and need the support
of compile-time constants to give the sysadmin some level of
flexibility.

The hw.uart.console and hw.uart.dbgport variables specify a list of
attributes. An attribute is a tag-value pair, seperated by a colon.
Attributes are seperated by a comma. Where possible, tags are the
same as those in /etc/remote (only br and pa in practice). Details
can be found in the manpage (not part of this commit).

Not tested on: amd64, pc98

show more ...