dev/uart: Support 8-byte register access

While we only support 4-byte registers in the uart code the physical
access may be to an 8-byte register. Support this as an option on
non-i386. On i386 we l

dev/uart: Support 8-byte register access

While we only support 4-byte registers in the uart code the physical
access may be to an 8-byte register. Support this as an option on
non-i386. On i386 we lack the needed 8-byte bus_space functions.

ACPI has an option for 8-byte register io width, and FDT can be given
any size. Support these sizes, even if we don't expect to see hardware
with an 8-byte io width.

Reviewed by: imp
Sponsored by: Arm Ltd
Differential Revision: https://reviews.freebsd.org/D43374

(cherry picked from commit a9fc9d6d15f006feb6d7ddb036e020d5f9d19fce)

show more ...

sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

uart: Remove sbbc reference

sbbc support is for sparc64 only, which was removed in 58aa35d42975.

Sponsored by: Netflix

arm: Catch up with Samsung S3C2xx0 code removal

The code backing these uart_class was removed 7 years ago in
4648ee952520.

Sponsored by: Netflix

scc(4)/uart(4): Remove obsolete support for Siemens SAB 82532

It's no longer used since 58aa35d42975c298ca0adba705c042596303c9f5
and r357455 respectively.

Add busy detect quirk to list of console options

This change allows one to set the busy_detect flag
required by the synopsys UART at the loader prompt.
This is needed by the EPYC 3000 SoC.

This wil

Add busy detect quirk to list of console options

This change allows one to set the busy_detect flag
required by the synopsys UART at the loader prompt.
This is needed by the EPYC 3000 SoC.

This will give users a working console up to the point where getty is required:
hw.uart.console="mm:0xfedc9000,rs:2,bd:1"

Reviewed by: imp
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D16399

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera

Allow setting access-width for UART registers.

This is required for FDT's standard "reg-io-width" property
(similar to "reg-shift" property) found in many DTS files.

This fixes operation on Altera Arria 10 SOC Development Kit,
where standard ns8250 uart allows 4-byte access only.

Reviewed by: kan, marcel
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9785

show more ...

Remove pc98 support completely.
I thank all developers and contributors for pc98.

Relnotes: yes

Move the uart_class definitions and fdt compat data into the individual
uart implementations, and export them using the new linker-set mechanism.

Differential Revision: https://reviews.freebsd.org/D

Move the uart_class definitions and fdt compat data into the individual
uart implementations, and export them using the new linker-set mechanism.

Differential Revision: https://reviews.freebsd.org/D1993
Submitted by: Michal Meloun

show more ...

Define new linker set, UART_FDT_CLASS_AND_DEVICE, for registering full
(class and device) FDT UART. Define second one, UART_FDT_CLASS, for UART
class only.

This paves the way for declaring uart_clas

Define new linker set, UART_FDT_CLASS_AND_DEVICE, for registering full
(class and device) FDT UART. Define second one, UART_FDT_CLASS, for UART
class only.

This paves the way for declaring uart_class data and ofw/fdt compat data
with a uart implementation, rather than needing a big global table of
compat data and weak-symbol declarations of every existing implementation.

Differential Revision: https://reviews.freebsd.org/D1992
Submitted by: Michal Meloun

show more ...

Rename Exynos UART driver. No functional change.

Submitted by: Michal Meloun <[email protected]>

Add uart driver for Qualcomm MSM 7000/8000 series chips.
It is working on IFC6410 board which has Qualcomm Snapdragon SoC.

Approved by: stas (mentor)

Add Atmel serial drivers.

Add support for Freescale Vybrid Family VF600 heterogeneous
ARM Cortex-A5/M4 SoC (M4 core is not used in this work).

Support includes device drivers for:
- NAND Flash Controller (NFC)
- USB Enhanced

Add support for Freescale Vybrid Family VF600 heterogeneous
ARM Cortex-A5/M4 SoC (M4 core is not used in this work).

Support includes device drivers for:
- NAND Flash Controller (NFC)
- USB Enhanced Host Controller Interface (EHCI)
- General-Purpose Input/Output (GPIO)
- Universal Asynchronous Receiver/Transmitter (UART)

Also supported:
- Generic Interrupt Controller (GIC)
- MPCore timer
- ffec ethernet driver

Reviewed by: ray
Approved by: cognet (mentor)

show more ...

Arrange for uart_cpu_fdt's probe() routine to use the same table of compat
strings as uart_bus_fdt's probe().

The bus code uses ofw_bus_search_compatible() and that's not an option in
cpu (console)

Arrange for uart_cpu_fdt's probe() routine to use the same table of compat
strings as uart_bus_fdt's probe().

The bus code uses ofw_bus_search_compatible() and that's not an option in
cpu (console) code -- it runs way before the ofw routines are usable. So
the console probe has its own loop to search the table, but now at least
there's only one table to be maintained when new devices are added.

show more ...

Add support for uarts other than the serial console in TI OMAP SoCs.

The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-s

Add support for uarts other than the serial console in TI OMAP SoCs.

The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-standard
mode control register has to be set to put the device in uart mode
(as opposed to irDa or other serial protocols). This adds the extra
code in an extension to the standard ns8250 probe routine, and the
rest of the driver is just the standard ns8250 code.

show more ...

Teach UART to attach Exynos/s3/s5 class driver.

Submitted by: Ruslan Bukin <[email protected]>
Reviewed by: gonzo

Add Xilinx Zynq ARM/FPGA SoC support to FreeBSD/arm port.

Submitted by: Thomas Skibo <ThomasSkibo (at) sbcglobal.net>
Tested by: wkoszek (ZedBoard)
Reviewed by: wkoszek, freebsd-arm@ (no objections

Add Xilinx Zynq ARM/FPGA SoC support to FreeBSD/arm port.

Submitted by: Thomas Skibo <ThomasSkibo (at) sbcglobal.net>
Tested by: wkoszek (ZedBoard)
Reviewed by: wkoszek, freebsd-arm@ (no objections raised)

show more ...

Integrate Efika MX project back to home.

Sponsored by: The FreeBSD Foundation

Add PrimeCell UART (PL011) driver

Obtained from: Semihalf

Merging of projects/armv6, part 8

r235162:

Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250
board.

Peripherals currently supported:
- Serial ports
- Interrupt contr

Merging of projects/armv6, part 8

r235162:

Initial LPC32x0 support. Includes DTS file for Embedded Artists EA3250
board.

Peripherals currently supported:
- Serial ports
- Interrupt controller
- Timers
- Ethernet
- USB host
- Framebuffer (in conjunction with SSD1289 LCD controller)
- RTC
- SPI
- GPIO

Submitted by: Jakub Wojciech Klama <[email protected]>

show more ...

Add minimal support for SGI Altix l1 console -- a SAL-based character
device. This may not be here to stay, because it's not a real serial
device. Then again, who cares?

Add sbbc(4), a driver for the BootBus controller found in Serengeti and
StarCat systems which provides time-of-day services for both as well as
console service for Serengeti, i.e. Sun Fire V1280. Whi

Add sbbc(4), a driver for the BootBus controller found in Serengeti and
StarCat systems which provides time-of-day services for both as well as
console service for Serengeti, i.e. Sun Fire V1280. While the latter is
described with a device type of serial in the OFW device tree, it isn't
actually an UART. Nevertheless the console service is handled by uart(4)
as this allowed to re-use quite a bit of MD and MI code. Actually, this
idea is stolen from Linux which interfaces the sun4v hypervisor console
with the Linux counterpart of uart(4).

show more ...