remove stale and unused code from various files
fix build on 32 bit platforms
simplify logic in netmap_virt.h

The commands (in net/netmap.h) to configure communication with the
hypervisor may be rev

remove stale and unused code from various files
fix build on 32 bit platforms
simplify logic in netmap_virt.h

The commands (in net/netmap.h) to configure communication with the
hypervisor may be revised soon.
At the moment they are unused so this will not be a change of API.

show more ...

Import the current version of netmap, aligned with the one on github.

This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffi

Import the current version of netmap, aligned with the one on github.

This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)

We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.

show more ...

sys/dev: minor spelling fixes.

Most affect comments, very few have user-visible effects.

Plug leak in m_unshare.

m_unshare passes on the source mbuf's flags as-is to m_getcl and this
results in a leak if the flags include M_NOFREE. The fix is to clear
the bits not listed in M_COPYALL b

Plug leak in m_unshare.

m_unshare passes on the source mbuf's flags as-is to m_getcl and this
results in a leak if the flags include M_NOFREE. The fix is to clear
the bits not listed in M_COPYALL before calling m_getcl. M_RDONLY
should probably be filtered out too but that's outside the scope of this
fix.

Add assertions in the zone_mbuf and zone_pack ctors to catch similar
bugs.

Update netmap_get_mbuf to not pass M_NOFREE to m_getcl. It's not clear
what the original code was trying to do but it's likely incorrect.
Updated code is no different functionally but it avoids the newly added
assertions.

Reviewed by: gnn@
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5698

show more ...

Sync netmap sources with the version in our private tree.
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco

Sync netmap sources with the version in our private tree.
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:

- fix zerocopy monitor ports and introduce copying monitor ports
(the latter are lower performance but give access to all traffic
in parallel with the application)

- exclusive open mode, useful to implement solutions that recover
from crashes of the main netmap client (suggested by Patrick Kelsey)

- revised memory allocator in preparation for the 'passthrough mode'
(ptnetmap) recently presented at bsdcan. ptnetmap is described in
S. Garzarella, G. Lettieri, L. Rizzo;
Virtual device passthrough for high speed VM networking,
ACM/IEEE ANCS 2015, Oakland (CA) May 2015
http://info.iet.unipi.it/~luigi/research.html

- fix rx CRC handing on ixl

- add module dependencies for netmap when building drivers as modules

- minor simplifications to device-specific routines (*txsync, *rxsync)

- general code cleanup (remove unused variables, introduce macros
to access rings and remove duplicate code,

Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).

Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.

MFC after: 1 month
Sponsored by: (partly) Verisign, Cisco

show more ...

sync a comment with our internal repo

Update to the current version of netmap.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.

Basically no user API changes (some bugfixes in sys/net/netmap_user.

Update to the current version of netmap.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.

Basically no user API changes (some bugfixes in sys/net/netmap_user.h).

In detail:

1. netmap support for virtio-net, including in netmap mode.
Under bhyve and with a netmap backend [2] we reach over 1Mpps
with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.

2. (kernel) add support for multiple memory allocators, so we can
better partition physical and virtual interfaces giving access
to separate users. The most visible effect is one additional
argument to the various kernel functions to compute buffer
addresses. All netmap-supported drivers are affected, but changes
are mechanical and trivial

3. (kernel) simplify the prototype for *txsync() and *rxsync()
driver methods. All netmap drivers affected, changes mostly mechanical.

4. add support for netmap-monitor ports. Think of it as a mirroring
port on a physical switch: a netmap monitor port replicates traffic
present on the main port. Restrictions apply. Drive carefully.

5. if_lem.c: support for various paravirtualization features,
experimental and disabled by default.
Most of these are described in our ANCS'13 paper [1].
Paravirtualized support in netmap mode is new, and beats the
numbers in the paper by a large factor (under qemu-kvm,
we measured gues-host throughput up to 10-12 Mpps).

A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.

Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.

This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.

A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.

MFC after: 3 days.

show more ...

Fix style bug: rename the refcount field of m_ext to ext_cnt, to match
other members.

Sponsored by: Nginx, Inc.

change the netmap mbuf destructor so the same code works also on FreeBSD 9.
For head and 10 this change has no effect, but on stable/9 it would cause
panics when using emulated netmap on top of a sta

change the netmap mbuf destructor so the same code works also on FreeBSD 9.
For head and 10 this change has no effect, but on stable/9 it would cause
panics when using emulated netmap on top of a standard device driver.

show more ...

better handling of netmap emulation over standard device drivers:
plug a potential mbuf leak, and detect bogus drivers that
return ENOBUFS even when the packet has been queued.

MFC after: 3 days

move netmap_getna() to a freebsd-specific file

remove two debugging messages, align comments with the code
in our development trunk

Introduce a procedural interface to the ifnet structure. The new
interface allows the ifnet structure to be defined as an opaque
type in NIC drivers. This then allows the ifnet structure to be
chan

Introduce a procedural interface to the ifnet structure. The new
interface allows the ifnet structure to be defined as an opaque
type in NIC drivers. This then allows the ifnet structure to be
changed without a need to change or recompile NIC drivers.

Put differently, NIC drivers can be written and compiled once and
be used with different network stack implementations, provided of
course that those network stack implementations have an API and
ABI compatible interface.

This commit introduces the 'if_t' type to replace 'struct ifnet *'
as the type of a network interface. The 'if_t' type is defined as
'void *' to enable the compiler to perform type conversion to
'struct ifnet *' and vice versa where needed and without warnings.
The functions that implement the API are the only functions that
need to have an explicit cast.

The MII code has been converted to use the driver API to avoid
unnecessary code churn. Code churn comes from having to work with
both converted and unconverted drivers in correlation with having
callback functions that take an interface. By converting the MII
code first, the callback functions can be defined so that the
compiler will perform the typecasts automatically.

As soon as all drivers have been converted, the if_t type can be
redefined as needed and the API functions can be fix to not need
an explicit cast.

The immediate benefactors of this change are:
1. Juniper Networks - The network stack implementation in Junos
is entirely different from FreeBSD's one and this change
allows Juniper to build "stock" NIC drivers that can be used
in combination with both the FreeBSD and Junos stacks.
2. FreeBSD - This change opens the door towards changing ifnet
and implementing new features and optimizations in the network
stack without it requiring a change in the many NIC drivers
FreeBSD has.

Submitted by: Anuranjan Shukla <[email protected]>
Reviewed by: glebius@
Obtained from: Juniper Networks, Inc.

show more ...

This new version of netmap brings you the following:

- netmap pipes, providing bidirectional blocking I/O while moving
100+ Mpps between processes using shared memory channels
(no mistake: over

This new version of netmap brings you the following:

- netmap pipes, providing bidirectional blocking I/O while moving
100+ Mpps between processes using shared memory channels
(no mistake: over one hundred million. But mind you, i said
*moving* not *processing*);

- kqueue support (BHyVe needs it);

- improved user library. Just the interface name lets you select a NIC,
host port, VALE switch port, netmap pipe, and individual queues.
The upcoming netmap-enabled libpcap will use this feature.

- optional extra buffers associated to netmap ports, for applications
that need to buffer data yet don't want to make copies.

- segmentation offloading for the VALE switch, useful between VMs.

and a number of bug fixes and performance improvements.

My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial
amount of work on these features so we owe them a big thanks.

There are some external repositories that can be of interest:

https://code.google.com/p/netmap
our public repository for netmap/VALE code, including
linux versions and other stuff that does not belong here,
such as python bindings.

https://code.google.com/p/netmap-libpcap
a clone of the libpcap repository with netmap support.
With this any libpcap client has access to most netmap
feature with no recompilation. E.g. tcpdump can filter
packets at 10-15 Mpps.

https://code.google.com/p/netmap-ipfw
a userspace version of ipfw+dummynet which uses netmap
to send/receive packets. Speed is up in the 7-10 Mpps
range per core for simple rulesets.

Both netmap-libpcap and netmap-ipfw will be merged upstream at some
point, but while this happens it is useful to have access to them.

And yes, this code will be merged soon. It is infinitely better
than the version currently in 10 and 9.

MFC after: 3 days

show more ...

netmap_user.h:
add separate rx/tx ring indexes
add ring specifier in nm_open device name

netmap.c, netmap_vale.c
more consistent errno numbers

netmap_generic.c
correctly handle failure

netmap_user.h:
add separate rx/tx ring indexes
add ring specifier in nm_open device name

netmap.c, netmap_vale.c
more consistent errno numbers

netmap_generic.c
correctly handle failure in registering interfaces.

tools/tools/netmap/
massive cleanup of the example programs
(a lot of common code is now in netmap_user.h.)

nm_util.[ch] are going away soon.
pcap.c will also go when i commit the native netmap support for libpcap.

show more ...

It is 2014 and we have a new version of netmap.
Most relevant features:

- netmap emulation on any NIC, even those without native netmap support.

On the ixgbe we have measured about 4Mpps/core/que

It is 2014 and we have a new version of netmap.
Most relevant features:

- netmap emulation on any NIC, even those without native netmap support.

On the ixgbe we have measured about 4Mpps/core/queue in this mode,
which is still a lot more than with sockets/bpf.

- seamless interconnection of VALE switch, NICs and host stack.

If you disable accelerations on your NIC (say em0)

ifconfig em0 -txcsum -txcsum

you can use the VALE switch to connect the NIC and the host stack:

vale-ctl -h valeXX:em0

allowing sharing the NIC with other netmap clients.

- THE USER API HAS SLIGHTLY CHANGED (head/cur/tail pointers
instead of pointers/count as before). This was unavoidable to support,
in the future, multiple threads operating on the same rings.
Netmap clients require very small source code changes to compile again.
On the plus side, the new API should be easier to understand
and the internals are a lot simpler.

The manual page has been updated extensively to reflect the current
features and give some examples.

This is the result of work of several people including Giuseppe Lettieri,
Vincenzo Maffione, Michio Honda and myself, and has been financially
supported by EU projects CHANGE and OPENLAB, from NetApp University
Research Fund, NEC, and of course the Universita` di Pisa.

show more ...

split netmap code according to functions:
- netmap.c base code
- netmap_freebsd.c FreeBSD-specific code
- netmap_generic.c emulate netmap over standard drivers
- netmap_mbq.c simple mbuf tailq
- ne

split netmap code according to functions:
- netmap.c base code
- netmap_freebsd.c FreeBSD-specific code
- netmap_generic.c emulate netmap over standard drivers
- netmap_mbq.c simple mbuf tailq
- netmap_mem2.c memory management
- netmap_vale.c VALE switch

simplify devce-specific code

show more ...