sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

firewire: Remove unused devclass arguments to DRIVER_MODULE.

firewire(4): Fix "set but not used" warnings

Sponsored By: EPSRC

cam: prefer cam_sim_softc() over accessing cam_sim structure directly.

Use the accessor function to get the softc for this sim. This also drops
an unneeded cast.

Sponsored by: Netflix
Reviewed by:

cam: prefer cam_sim_softc() over accessing cam_sim structure directly.

Use the accessor function to get the softc for this sim. This also drops
an unneeded cast.

Sponsored by: Netflix
Reviewed by: mav@, hselasky@
Differential Revision: https://reviews.freebsd.org/D30360

show more ...

Make MAXPHYS tunable. Bump MAXPHYS to 1M.

Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.

Make b_pag

Make MAXPHYS tunable. Bump MAXPHYS to 1M.

Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.

Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.

Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.

Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.

Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225

show more ...

Make sbp(4) use xpt_alloc_ccb/xpt_free_ccb instead of malloc/free.

Reviewed by: imp, mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://review

Make sbp(4) use xpt_alloc_ccb/xpt_free_ccb instead of malloc/free.

Reviewed by: imp, mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26843

show more ...

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly mark

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718

show more ...

Remove sparc64 kernel support

Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

firewire/sbp: try to improve locking, plus a few style nits

This change tries to fix the most obvious locking problems.

sbp_cam_scan_lun() is never called with the sbp lock held, so the lock
needs

firewire/sbp: try to improve locking, plus a few style nits

This change tries to fix the most obvious locking problems.

sbp_cam_scan_lun() is never called with the sbp lock held, so the lock
needs to be acquired internally (if it's needed at all).
Without this change a kernel with INVARIANTS panics when a firewire disk
is connected:
panic: mutex sbp not owned at /usr/src/sys/dev/firewire/sbp.c:967
KDB: stack backtrace:
db_trace_self_wrapper() at 0xffffffff80420bbb = db_trace_self_wrapper+0x2b/frame 0xfffffe0504df0930
kdb_backtrace() at 0xffffffff80670359 = kdb_backtrace+0x39/frame 0xfffffe0504df09e0
vpanic() at 0xffffffff8063986c = vpanic+0x14c/frame 0xfffffe0504df0a20
panic() at 0xffffffff806395b3 = panic+0x43/frame 0xfffffe0504df0a80
__mtx_assert() at 0xffffffff8061c40d = __mtx_assert+0xed/frame 0xfffffe0504df0ac0
sbp_cam_scan_lun() at 0xffffffff80474667 = sbp_cam_scan_lun+0x37/frame 0xfffffe0504df0af0
xpt_done_process() at 0xffffffff802aacfa = xpt_done_process+0x2da/frame 0xfffffe0504df0b30
xpt_done_td() at 0xffffffff802ac2e5 = xpt_done_td+0xd5/frame 0xfffffe0504df0b80
fork_exit() at 0xffffffff805ff72f = fork_exit+0xdf/frame 0xfffffe0504df0bf0
fork_trampoline() at 0xffffffff8082483e = fork_trampoline+0xe/frame
0xfffffe0504df0bf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---

Also, I tried to reduce the scope of the sbp lock to avoid holding it
while doing bus_dma allocations.

The code badly needs some re-engineering. SBP really should implement
a CAM transport, so that it avoids control flow inversion when re-scanning
the bus. Also, the sbp lock seems to be too coarse.

Additionally, the commit includes some changes not related to locking.

- sbp_cam_scan_lun: restore CAM_DEV_QFREEZE before re-queueing the ccb
because xpt_setup_ccb resets ccb_h.flags
- sbp_post_busreset: call xpt_release_simq only if it's actually frozen
- don't place private SIMQ_FREEZED flag (sic, "freezed") into sim->flags,
use sbp->flags for that
- some style fixes and control flow enhancements

Reviewed by: sbruno
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9898

show more ...

Add safety check against too long CDB.

SBP-2 specification defined maximum CDB length as 12 bytes. Newer SBP-3
specification allows CDB of any size, but this driver is too old. Proper
solution wou

Add safety check against too long CDB.

SBP-2 specification defined maximum CDB length as 12 bytes. Newer SBP-3
specification allows CDB of any size, but this driver is too old. Proper
solution would be to look on maximal ORB size supported by the target.

MFC after: 1 week

show more ...

In the same vein as r311350, fix whitespace in handling of XPT_PATH_INQ in
several more drivers.

Sponsored by: Panasas

Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)

The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/c

Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)

The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039
Reviewed by: imp, sephe, slm
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9037
Differential Revision: https://reviews.freebsd.org/D9038

show more ...

Prevent overflow issues in timeout processing

Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert

Prevent overflow issues in timeout processing

Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.

Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.

Also correct isci to correctly resolve ccb timeout.

This was based on the original work done by Eygene Ryabinkin
<[email protected]> back in 5 Aug 2011 which used a macro to help avoid
the overlow.

Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay

show more ...

Remove obsolete compatibility glue and improve firewire code readability.

Commit my version of style(9) pass over the firewire code. Now that
other people have started changing the code carrying thi

Remove obsolete compatibility glue and improve firewire code readability.

Commit my version of style(9) pass over the firewire code. Now that
other people have started changing the code carrying this is as a
local patch is not longer a viable option.

MFC after: 1 month

show more ...

Start the process of cleaning up FreeBSD's firewire driver.

sys/dev/firewire/firewire.c:
sys/dev/firewire/firewire.h:
sys/dev/firewire/firewirereg.h:
sys/dev/firewire/fwcrom.c:
sys/dev/firewire/fwde

Start the process of cleaning up FreeBSD's firewire driver.

sys/dev/firewire/firewire.c:
sys/dev/firewire/firewire.h:
sys/dev/firewire/firewirereg.h:
sys/dev/firewire/fwcrom.c:
sys/dev/firewire/fwdev.c:
sys/dev/firewire/fwdma.c:
sys/dev/firewire/fwmem.c:
sys/dev/firewire/fwohci.c:
sys/dev/firewire/fwohci_pci.c:
sys/dev/firewire/fwohcivar.h:
sys/dev/firewire/if_fwe.c:
sys/dev/firewire/if_fwip.c:
sys/dev/firewire/sbp.c:
sys/dev/firewire/sbp_targ.c:
Unifdef the code, removing support for DragonflyBSD
and FreeBSD prior to version 5.

Submitted by: gibbs
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 1081188 on 2014/08/01

show more ...

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

show more ...

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statica

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

Set target->sbp field to valid value when sbp device is created.

The sbp_cam_detach_target can be called from sbp_post_explore function
on the first target that is not really attached and it was wri

Set target->sbp field to valid value when sbp device is created.

The sbp_cam_detach_target can be called from sbp_post_explore function
on the first target that is not really attached and it was written with
the corresponding safety check in place to tolerate that. Unfortunately
the recent locking cleanup did add a locking assertion that tries to
dereference the target->sbp pointer unconditionally, which causes less
than desirable outcome. Since the assertion is useful, just initialize
the target sbp pointer once when sbp device is being initialized instead
of when the target is being attached. This makes assertion work in all
cases and fixes the crash on boot.

show more ...

Various cleanups and fixes:
- Switch from timeout() to callout_*() for per-request timers.
- Use device_find_child() in the identify routine.
- Use device_printf() instead of passing device_get_nameu

Various cleanups and fixes:
- Switch from timeout() to callout_*() for per-request timers.
- Use device_find_child() in the identify routine.
- Use device_printf() instead of passing device_get_nameunit() to
printf().
- Expand the SBP_LOCK coverage simplifying the locking.
- Uninline STAILQ_FOREACH_SAFE().

Tested by: sbruno

show more ...

Remove some unused variables.

Found with: Clang Static Analyzer
MFC after: 2 weeks

Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bi

Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with: -arch, rdivacky
Reviewed by: cperciva

show more ...

Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as

Adjust various SCSI drivers to handle either a 32-bit or 64-bit lun_id_t,
mostly by adjustments to debugging printf() format specifiers. For high
numbered LUNs, also switch to printing them in hex as per SAM-5.

MFC after: 2 weeks

show more ...

Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there. There are no user-servicable p

Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there. There are no user-servicable parts in there, so
no need for those tools to be groping around in there.

Approved by: re

show more ...