sys: Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

powerpc/pseries: Allow radix pmap in pseries for ISA 3.0

ISA 3.0 allows for nested radix translations with minimal to no
involvement of the hypervisor. This should make pseries signficantly
faster

powerpc/pseries: Allow radix pmap in pseries for ISA 3.0

ISA 3.0 allows for nested radix translations with minimal to no
involvement of the hypervisor. This should make pseries signficantly
faster on POWER9 pseries instances, as fewer hypercalls are needed to
manage pmap now.

MFC after: 2 weeks
Relnotes: yes

show more ...

Make ISA_206_ATOMICS a kernel option

Summary:
To make it easier to build a kernel with PowerISA 2.06 atomics (sub-word
atomics), add a kernel config option. User space still needs to specify
it as

Make ISA_206_ATOMICS a kernel option

Summary:
To make it easier to build a kernel with PowerISA 2.06 atomics (sub-word
atomics), add a kernel config option. User space still needs to specify
it as a CFLAG but that seems easier to do than for the kernel config.

Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D29809

show more ...

Remove remaning definition of GFB_<foo> options.
They are not used in source files.
This fixes build of some arm boards after r368159.

Reported by: mjg

[PowerPC64LE] Work around qemu TCG bug in mtmsrd emulation.

The TCG implementation of mtmsrd in qemu blindly copies the entire register
to the MSR, instead of the specific bit positions listed in th

[PowerPC64LE] Work around qemu TCG bug in mtmsrd emulation.

The TCG implementation of mtmsrd in qemu blindly copies the entire register
to the MSR, instead of the specific bit positions listed in the ISA.

This means that qemu will prematurely switch endian out from under the
running code instead of waiting for the rfid, causing an immediate trap
as it attempts to interpret the next instruction in the wrong endianness.

To work around this, ensure PSL_LE is still set before doing the mtmsrd.

In the future, we may wish to just turn off translation and unconditionally
use rfid to switch to the ofmsr instead of quasi-switching to the ofmsr.

Add a new platform option so this can be disabled. (And so that we can
conditonalize additional QEMU-specific hacks in the platform code.)

Sponsored by: Tag1 Consulting, Inc.

show more ...

[PowerPC64LE] Set up powerpc.powerpc64le architecture

This is the initial set up for PowerPC64LE.

The current plan is for this arch to remain experimental for FreeBSD 13.

This started as a weekend

[PowerPC64LE] Set up powerpc.powerpc64le architecture

This is the initial set up for PowerPC64LE.

The current plan is for this arch to remain experimental for FreeBSD 13.

This started as a weekend learning project for me and kinda snowballed from
there.

(More to follow momentarily.)

Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399

show more ...

powerpc: Axe PPC4xx support.

Summary:
The support was added almost a decade ago, and never completed. Just axe
it. It was also inadvertently broken 5 years ago, and nobody noticed.

Reviewed by: b

powerpc: Axe PPC4xx support.

Summary:
The support was added almost a decade ago, and never completed. Just axe
it. It was also inadvertently broken 5 years ago, and nobody noticed.

Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D23753

show more ...

Enable ixl device on PowerPC64

The ixl driver now works on PowerPC64 and may be compiled in-kernel and
as a module.

Reviewed by: alfredo, erj
Sponsored by: Eldorado Research Institute (eldorado.org

Enable ixl device on PowerPC64

The ixl driver now works on PowerPC64 and may be compiled in-kernel and
as a module.

Reviewed by: alfredo, erj
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23974

show more ...

powerpc: Add AmigaOne platform, a subclass of MPC85xx

Summary:
The AmigaOne platform, encompassing the X5000 and A1222 at this time, is
based on the mpc85xx platform, but includes some things not li

powerpc: Add AmigaOne platform, a subclass of MPC85xx

Summary:
The AmigaOne platform, encompassing the X5000 and A1222 at this time, is
based on the mpc85xx platform, but includes some things not listed in
the device tree. Some custom devices, like CPLD, could be added to the
device tree with an overlay, or other means. However, some cannot
easily be done, such as the power button interrupt.

The directory will also become a location to add AmigaOne platform drivers,
such as the aforementioned CPLD, and its children.

Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D21829

show more ...

powerpc/pmap64: Make moea64 statistics optional

Summary:
It turns out statistics accounting is very expensive in the pmap driver,
and doesn't seem necessary in the common case. Make this optional
b

powerpc/pmap64: Make moea64 statistics optional

Summary:
It turns out statistics accounting is very expensive in the pmap driver,
and doesn't seem necessary in the common case. Make this optional
behind a MOEA64_STATS #define, which one can set if they really need
statistics.

This saves ~7-8% on buildworld time on a POWER9.

Found by bdragon.

Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D20903

show more ...

Move most of the contents of opt_compat.h to opt_global.h.

opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
close

Move most of the contents of opt_compat.h to opt_global.h.

opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.

Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.

Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.

Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941

show more ...

PowerNV: XICS support for PowerNV/OPAL

Make XICS to be OPAL-aware.

Created by: Nathan Whitehorn <[email protected]>
Submitted by: Wojciech Macek <[email protected]>
Sponsore

PowerNV: XICS support for PowerNV/OPAL

Make XICS to be OPAL-aware.

Created by: Nathan Whitehorn <[email protected]>
Submitted by: Wojciech Macek <[email protected]>
Sponsored by: FreeBSD Foundation

show more ...

PowerNV: initial support for OPAL

OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.

Created by: Nathan Whitehorn <[email protected]>
Submitte

PowerNV: initial support for OPAL

OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.

Created by: Nathan Whitehorn <[email protected]>
Submitted by: Wojciech Macek <[email protected]>

show more ...

Create a new MACHINE_ARCH for Freescale PowerPC e500v2

Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector p

Create a new MACHINE_ARCH for Freescale PowerPC e500v2

Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).

Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.

Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.

Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.

Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.

Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683

show more ...

Merge MPC85XX and QorIQ config options

Summary:
MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was
added, QORIQ_DPAA was brought in as a config option to support the differences
in

Merge MPC85XX and QorIQ config options

Summary:
MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was
added, QORIQ_DPAA was brought in as a config option to support the differences
in hardware register settings between QorIQ (e500mc-, e5500- based) SoCs and
QUICC (e500v1/e500v2-based) SoCs, particularly in the Local Access Window (LAW)
target settings.

Unify these settings using macros to hide details and ease porting, and use a
new function (mpc85xx_is_qoriq()) to distinguish between QorIQ and QUICC SoCs at
runtime.

An alternative to using the function could be to use a variable initialized at
platform attach time, which may incur less overhead at runtime. Since it's not
in the critical path once booted, this optimization doesn't seem necessary at
first pass.

Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7294

show more ...

Add support for new LAW registers in QorIQ SoCs.

QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while
MPC85XX, and P1/P2 families use only a single BAR register.

This also

Add support for new LAW registers in QorIQ SoCs.

QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while
MPC85XX, and P1/P2 families use only a single BAR register.

This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle
this difference.

Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing

show more ...

Create a RouterBoard platform and use it to create a flash map

Summary:
The RouterBoard uses a predefined partition map which doesn't exist in the fdt.
This change allows overriding the fdt slicer w

Create a RouterBoard platform and use it to create a flash map

Summary:
The RouterBoard uses a predefined partition map which doesn't exist in the fdt.
This change allows overriding the fdt slicer with a custom slicer, and uses this
custom slicer to define the flash map on the RouterBoard RB800.
D3305 converts the mpc85xx platform into a base class, so that systems based on
the mpc85xx platform can add their own overrides. This change builds on D3305,
and creates a RouterBoard (RB800) platform to initialize the slicer override.

Reviewed By: nwhitehorn, imp
Differential Revision: https://reviews.freebsd.org/D3345

show more ...

Remove FreeBSD/wii.

This port failed to gain traction and probably only a couple Wii consoles
ran FreeBSD all the way to single user mode with an md(4). IPC
support was never implemented, so it was

Remove FreeBSD/wii.

This port failed to gain traction and probably only a couple Wii consoles
ran FreeBSD all the way to single user mode with an md(4). IPC
support was never implemented, so it was impossible to use any peripheral

Any further development, if any, will happen at https://github.com/rpaulo/wii.

Discussed with: nathanw (a long time ago), jhibbits

show more ...

Merge in support for PAPR-compliant (Power Architecture Platform
Requirements) systems from the projects/pseries branch. This in principle
includes all IBM POWER hardware released in the last 15 year

Merge in support for PAPR-compliant (Power Architecture Platform
Requirements) systems from the projects/pseries branch. This in principle
includes all IBM POWER hardware released in the last 15 years with the
exception of POWER3-based systems when run in 64-bit mode. The main
development target, however, has been the PAPR logical partition support
that is the default target in KVM on POWER and QEMU -- mileage may vary
on actual hardware at present. Much of the heavy lifting here was done
by Andreas Tobler.

Approved by: re (kib)

show more ...

Initial support for running FreeBSD on the Nintendo Wii. We're able to
reach single user mode using a memory disk device as the file system.

This port includes the framebuffer driver, the PIC driver

Initial support for running FreeBSD on the Nintendo Wii. We're able to
reach single user mode using a memory disk device as the file system.

This port includes the framebuffer driver, the PIC driver, a platform
driver and the GPIO driver. The IPC driver (to talk to IOS kernels) is
not yet written but there's a placeholder for it.

There are still some MMU problems and to get a working system you need to
patch locore32.S. Since we haven't found the best way yet to address that
problem, we're not committing those changes yet. The problem is related to
the different BAT layout on the Wii and to the fact that the Homebrew
loader doesn't clean up the special registers (including the 8 BATs)
before passing control to us.

You'll need a Wii with Homebrew loader and a TV that can do NTSC (for now).

Submitted by: Margarida Gouveia

show more ...

Let us manage differences of Book-E PowerPC variations i.e. vendor /
implementation specific vs. the common architecture definition.

Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions un

Let us manage differences of Book-E PowerPC variations i.e. vendor /
implementation specific vs. the common architecture definition.

Bring PPC4XX defines (PSL, SPR, TLB). Note the new definitions under
BOOKE_PPC4XX are not used in the code yet.

This change set is not supposed to affect existing E500 support, it's just
another reorg step before bringing support for E500mc, E5500 and PPC465.

Obtained from: AppliedMicro, Freescale, Semihalf

show more ...

Import support for the Sony Playstation 3 using the OtherOS feature
available on firmwares 3.15 and earlier.

Caveats: Support for the internal SATA controller is currently missing,
as is support for

Import support for the Sony Playstation 3 using the OtherOS feature
available on firmwares 3.15 and earlier.

Caveats: Support for the internal SATA controller is currently missing,
as is support for framebuffer resolutions other than 720x480. These
deficiencies will be remedied soon.

Special thanks to Peter Grehan for providing the hardware that made this
port possible, and thanks to Geoff Levand of Sony Computer Entertainment
for advice on the LV1 hypervisor.

show more ...

Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC
Macintoshes with an AGP bus.

Add support for the IBM Full-System Simulator (Mambo). This code has been
developed against the 970 and Cell simulators.

MFppc64:

Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kerne

MFppc64:

Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.

show more ...