camcontrol: Enable WITH_NVME unconditionally

MK_NVME is no longer marked broken for any platforms, so just include
support for it always as we do for ATA and SCSI.

Reviewed by: emaste
Sponsored by:

camcontrol: Enable WITH_NVME unconditionally

MK_NVME is no longer marked broken for any platforms, so just include
support for it always as we do for ATA and SCSI.

Reviewed by: emaste
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44841

(cherry picked from commit 2b676a66c00af03e4b64d072658d2478dbdf0a97)

show more ...

camcontrol: One file per line in Makefile

We have enough files now that moving to one file per line makes sense.

Sponsored by: Netflix

(cherry picked from commit 69ae43a1e6a53a1b8898a31c6b7140bf5

camcontrol: One file per line in Makefile

We have enough files now that moving to one file per line makes sense.

Sponsored by: Netflix

(cherry picked from commit 69ae43a1e6a53a1b8898a31c6b7140bf52b2c3ad)

show more ...

Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

camcontrol: depop command

Implement and document the new depop command. This command manages drive elements
for drives that support it. Storage elements are typically heads. Element status
can be di

camcontrol: depop command

Implement and document the new depop command. This command manages drive elements
for drives that support it. Storage elements are typically heads. Element status
can be discovered. Elements may be removed or restored. And the status of any
current depop operation can be assessed.

depop -d elm will remove element elm and truncate available capacity.
depop -l will list the current drive elements and their current status.
depop -r elm will try to restore all retired elements and rebuild capacity.

Changing storage elements may reinitialize the drive. This operation will lose
data and may take hours to complete. Use the drive provided timeout for
operations by default.

Reviewed by: gbe (manpages)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29018

show more ...

Retire support for -DMINIMALISTIC

We've not used this in years since we retired sysinstall, and it
hasn't compiled in at least a year. A full camcontrol is only 180k, so
making it smaller is not as

Retire support for -DMINIMALISTIC

We've not used this in years since we retired sysinstall, and it
hasn't compiled in at least a year. A full camcontrol is only 180k, so
making it smaller is not as important as it once was.

OK'd by: ken@, scottl@

show more ...

NVME support is only for x86 and powerpc64.

Implement MK_NVME now that the expression for where NVMe is
complicated. Default it to "yes" for x86 and powerpc64 and
no everywhere else. Use it in camco

NVME support is only for x86 and powerpc64.

Implement MK_NVME now that the expression for where NVMe is
complicated. Default it to "yes" for x86 and powerpc64 and
no everywhere else. Use it in camcontrol to define WITH_NVME
for those platforms where we support nvme.

This should fix the newly introduced nvme files to camcontrol
which were building everywhere.

Pointy Hat To: imp
Sponsored by: Netflix

show more ...

Make camcontrol identify work with nda devices

Both ATA and NVME have an identify command. They are completely
different, but to the user they are the same. Leverage nvmecontrol's
print_controller c

Make camcontrol identify work with nda devices

Both ATA and NVME have an identify command. They are completely
different, but to the user they are the same. Leverage nvmecontrol's
print_controller code to provide that functionality to camcontrol
identify. Query the path to see what kind of protocol it supports, and
send the most appropriate command down. Refactor nvme_print_dev a
little to make it easy to get the nvme cdata.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371

show more ...

Add SCSI REPORT TIMESTAMP and SET TIMESTAMP support.

This adds support to camcontrol(8) and libcam(3) for getting and setting
the time on SCSI protocol drives. This is more commonly found on tape
d

Add SCSI REPORT TIMESTAMP and SET TIMESTAMP support.

This adds support to camcontrol(8) and libcam(3) for getting and setting
the time on SCSI protocol drives. This is more commonly found on tape
drives, but is a SPC (SCSI Primary Commands) command, and may be found
on any device that speaks SCSI.

The new camcontrol timestamp subcommand allows getting the current device
time or setting the time to the current system time or any arbitrary time.

sbin/camcontrol/Makefile:
Add timestamp.c.

sbin/camcontrol/camcontrol.8:
Document the new timestamp subcommand.

sbin/camcontrol/camcontrol.c:
Add the timestamp subcommand to camcontrol.

sbin/camcontrol/camcontrol.h:
Add the timestamp() function prototype.

sbin/camcontrol/timestamp.c:
Timestamp setting and reporting functionality.

sys/cam/scsi/scsi_all.c:
Add two new CCB building functions, scsi_set_timestamp() and
scsi_report_timestamp(). Also, add a new helper function,
scsi_create_timestamp().

sys/cam/scsi/scsi_all.h:
Add CDB and parameter data for the the set and report timestamp
commands.

Add function declarations for the new CCB building and helper
functions.

Submitted by: Sam Klopsch
Sponsored by: Spectra Logic
MFC After: 2 weeks

show more ...

Add support for managing Shingled Magnetic Recording (SMR) drives.

This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which

Add support for managing Shingled Magnetic Recording (SMR) drives.

This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.

Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.

Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.

sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype

Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).

The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.

sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.

sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).

These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)

This includes support for all commands defined in the ZBC and
ZAC specs.

sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().

Add a new CCB building function, ata_read_log().

Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.

Add four new probe states to gather information needed for zone
support.

Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.

Add new sysctl variables that describe zone support and paramters.

Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.

Add descriptions for ZBC Host Managed devices.

Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).

Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().

Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.

Add Zoned Block Device Characteristics VPD page.

Add ATA Return SCSI sense descriptor.

Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.

Add five new probe states, four of which are needed for ATA
devices.

Add five new sysctl variables that describe zone support and
parameters.

The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.

Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.

Add SCSI Report Zones data structures.

Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.

But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.

In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.

sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.

Add permissions check for BIO_ZONE commands.

Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.

sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.

sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.

sys/sys/disk.h:
Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.

This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.

usr.sbin/Makefile:
Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.

Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)

show more ...

Explicitly add more files to the 'runtime' package.

Sponsored by: The FreeBSD Foundation

Add support for reading MAM attributes to camcontrol(8) and libcam(3).

MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.

This includes support for reading attribute

Add support for reading MAM attributes to camcontrol(8) and libcam(3).

MAM is Medium Auxiliary Memory and is most commonly found as flash
chips on tapes.

This includes support for reading attributes and decoding most
known attributes, but does not yet include support for writing
attributes or reporting attributes in XML format.

libsbuf/Makefile:
Add subr_prf.c for the new sbuf_hexdump() function. This
function is essentially the same function.

libsbuf/Symbol.map:
Add a new shared library minor version, and include the
sbuf_hexdump() function.

libsbuf/Version.def:
Add version 1.4 of the libsbuf library.

libutil/hexdump.3:
Document sbuf_hexdump() alongside hexdump(3), since it is
essentially the same function.

camcontrol/Makefile:
Add attrib.c.

camcontrol/attrib.c:
Implementation of READ ATTRIBUTE support for camcontrol(8).

camcontrol/camcontrol.8:
Document the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.c:
Add the new 'camcontrol attrib' subcommand.

camcontrol/camcontrol.h:
Add a function prototype for scsiattrib().

share/man/man9/sbuf.9:
Document the existence of sbuf_hexdump() and point users to
the hexdump(3) man page for more details.

sys/cam/scsi/scsi_all.c:
Add a table of known attributes, text descriptions and
handler functions.

Add a new scsi_attrib_sbuf() function along with a number
of other related functions that help decode attributes.

scsi_attrib_ascii_sbuf() decodes ASCII format attributes.

scsi_attrib_int_sbuf() decodes binary format attributes, and
will pass them off to scsi_attrib_hexdump_sbuf() if they're
bigger than 8 bytes.

scsi_attrib_vendser_sbuf() decodes the vendor and drive
serial number attribute.

scsi_attrib_volcoh_sbuf() decodes the Volume Coherency
Information attribute that LTFS writes out.

sys/cam/scsi/scsi_all.h:
Add a number of attribute-related structure definitions and
other defines.

Add function prototypes for all of the functions added in
scsi_all.c.

sys/kern/subr_prf.c:
Add a new function, sbuf_hexdump(). This is the same as
the existing hexdump(9) function, except that it puts the
result in an sbuf.

This also changes subr_prf.c so that it can be compiled in
userland for includsion in libsbuf.

We should work to change this so that the kernel hexdump
implementation is a wrapper around sbuf_hexdump() with a
statically allocated sbuf with a drain. That will require
a drain function that goes to the kernel printf() buffer
that can take a non-NUL terminated string as input.
That is because an sbuf isn't NUL-terminated until it is
finished, and we don't want to finish it while we're still
using it.

We should also work to consolidate the userland hexdump and
kernel hexdump implemenatations, which are currently
separate. This would also mean making applications that
currently link in libutil link in libsbuf.

sys/sys/sbuf.h:
Add the prototype for sbuf_hexdump(), and add another copy
of the hexdump flag values if they aren't already defined.

Ideally the flags should be defined in one place but the
implemenation makes it difficult to do properly. (See
above.)

Sponsored by: Spectra Logic Corporation
MFC after: 1 week

show more ...

Convert sbin/ to LIBADD
Reduce overlinking

Add persistent reservation support to camcontrol(8).

camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.

sbin/camcontrol/Make

Add persistent reservation support to camcontrol(8).

camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.

sbin/camcontrol/Makefile:
Add persist.c.

sbin/camcontrol/persist.c:
New persistent reservation support for camcontrol(8).

We have support for all known operation modes for PERSISTENT RESERVE
IN and PERSISTENT RESERVE OUT.
exceptions noted above.

sbin/camcontrol/camcontrol.8:
Document the new 'persist' subcommand.

In the section on the Transport ID (-I) option, explain what
Transport IDs for each protocol should look like. At some point
some of this information could probably get moved off in a
separate man page, either on Transport IDs alone or a man page
documenting the Transport ID parsing code.

Add a number of examples of persistent reservation commands.
Persistent Reservations are complex enough that the average user
probably won't be able to get the commands exactly right by just
reading the man page. These examples show a few basic and
advanced examples of how to use persistent reservations.

sbin/camcontrol/camcontrol.h:
Move the definition for camcontrol_optret here, so we can use it
for the persistent reservation code.

Add a definition for the new scsipersist() function.

sbin/camcontrol/camcontrol.c:
Add 'persist' to the list of subcommands.

Document 'persist' in the help text.

sys/cam/scsi/scsi_all.c:
Add the scsi_persistent_reserve_in() and
scsi_persistent_reserve_out() CCB building functions.

Add a new function, scsi_transportid_sbuf(). This takes a
SCSI Transport ID (documented in SPC-4), and prints it to
an sbuf(9). There are some transports (like ATA, USB, and
SSA) for which there is no transport defined. We need to
come up with a reasonable thing to do if we're presented
with a Transport ID that claims to be for one of those
protocols.

Add new routines scsi_get_nv() and scsi_nv_to_str().

These functions do a table lookup to go between a string and an
integer. There are lots of table lookups needed in the
persistent reservation code in camcontrol(8).

Add a new function, scsi_parse_transportid(), along with leaf node
functions to parse:
FC, 1394 and SAS (scsi_parse_transportid_64bit())
iSCSI (scsi_parse_transportid_iscsi())
SPI (scsi_parse_transportid_spi())
RDMA (scsi_parse_transportid_rdma())
PCIe (scsi_parse_transportid_sop())

Transport IDs. Given a string with the general form proto,id these
functions create a SCSI Transport ID structure.

sys/cam/scsi/scsi_all.h:
Update the various persistent reservation data structures to
SPC4r36l, but also rename some fields that were previously
obsolete with the proper names from older SCSI specs. This
allows using older, obsolete persistent reservation types when
desired.

Add function prototypes for the new persistent reservation CCB
building functions.

Add a data strucure for the READ FULL STATUS service action
of the PERSISTENT RESERVE IN command.

Add Transport ID structures for all protocols described in SPC-4.

Add a new series of SCSI_PROTO_XXX definitions, and
redefine other defines in terms of these new definitions.

Add a prototype for scsi_transportid_sbuf().

Change a couple of "obsolete" persistent reservation data
structure fields into something more meaningful, based on
what the field was called when it was defined in the spec.
(e.g. SPC, SPC-2, etc.)

Create a new define, SPRI_MAX_LEN, for the maximum allocation
length allowed for the PERSISTENT RESERVE IN command.

Add data structures and enumerations for the new name/value
translation functions.

Add data structures for SCSI over PCIe Routing IDs.

Bring the PERSISTENT RESERVE OUT Register and Move parameter list
structure (struct scsi_per_res_out_parms) up to date with SPC-4.

Add a data structure for the transport IDs that can optionally be
appended to the basic PERSISTENT RESERVE OUT parameter list.

Move SCSI protocol macro definitions out of the VPD page 0x83
definition and combine them with the more up to date protocol
definitions higher in the file.

Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
scsi_parse_transportid_sop(), and scsi_parse_transportid().

Sponsored by: Spectra Logic Corporation
MFC after: 1 week

show more ...

Update the 'fwdownload' command to also flash disks connected over an
ATA/SATA transport. The detection logic is automatic, so it should Just
Work. While here, also improve the progress meter that

Update the 'fwdownload' command to also flash disks connected over an
ATA/SATA transport. The detection logic is automatic, so it should Just
Work. While here, also improve the progress meter that is displayed
during firmware download.

Submitted by: Alistair Crooks
Obtained from: Netflix, Inc.
MFC after: 3 days

show more ...

Fix build when RELEASE_CRUNCH is defined.

Add firmware update support for SCSI devices.

Firmware can be reprogrammed on devices from Hitachi, HP, IBM, Plextor,
Quantum, and Seagate. At least one device from each manufacturer has
been teste

Add firmware update support for SCSI devices.

Firmware can be reprogrammed on devices from Hitachi, HP, IBM, Plextor,
Quantum, and Seagate. At least one device from each manufacturer has
been tested with some version of this code, and it has been used to
update thousands of drives so far.

The man page suggests having a backup of the drive's data, and the
operation must be confirmed, either interactively or on the command
line. (This is the same as the confirmation on the format command.)

This work is largely derived from fwprog.c by Andre Albsmeier.

Submitted by: Nima Misaghian
Sponsored by: Sandvine Incorporated
MFC after: 3 months

show more ...

MFtbemd:

Prefer MACHNE_CPUARCH to MACHINE_ARCH in most contexts where you want
to test of all the CPUs of a given family conform.

Switch the default WARNS level for sbin/ to 6.

Submitted by: Ulrich Spörlein

Add SCSI READ CAPACITY support to camcontrol. The new 'readcap' subcommand
will automatically issue the 16 byte verison of read capacity if the device
in question is larger than 2TB.

There are also

Add SCSI READ CAPACITY support to camcontrol. The new 'readcap' subcommand
will automatically issue the 16 byte verison of read capacity if the device
in question is larger than 2TB.

There are also a number of output options here (last block, number of
blocks, human readable) that should meet most needs, and also aid in
scripting.

Approved by: re (bmah)
MFC after: 1 week

show more ...

Use WARNS?=3 for these in the arm case for now, due to toolchain issues.

Make this WARNS=6 clean by:
1: add 'const' to char * where needed;
2: mark unused variables with __unused;
3: remove double prototypes for mode_edit and mode_list.
4: moves the global variables '

Make this WARNS=6 clean by:
1: add 'const' to char * where needed;
2: mark unused variables with __unused;
3: remove double prototypes for mode_edit and mode_list.
4: moves the global variables 'bus', 'target', and 'lun' into
the main function and protect them with #ifndef MINIMALISTIC,
5: renames 3 variable in order not to shadow other things
index -> indx -- in modepage_dump since index is a function
from <strings.h.>
arglist -> arglst -- in the function parse_btl since arglist
is also a global variable
convertend -> convertend2 -- in the function editentry_set
since that name is used two times within the function.
6: cast 0xffffffff in the macro RESOLUTION_MAX(size) to (int)
since it is unsigned otherwise.

Tested by: make universe
Approved by: ken

show more ...

Remove MAINTAINER= lines in the makefiles for camcontrol, iostat, libcam
and libdevstat, since the new way of doing things is to just list
maintainership in src/MAINTAINERS.

Also, remove duplicate e

Remove MAINTAINER= lines in the makefiles for camcontrol, iostat, libcam
and libdevstat, since the new way of doing things is to just list
maintainership in src/MAINTAINERS.

Also, remove duplicate entries in src/MAINTAINERS for those utilities. I
already had entries for them.

show more ...

Set WARNS=1. RESOLUTION_MAX macro has major signed/unsigned issues.

Make camcontrol WARNS=2 clean.

Approved by: ken

Style.

Approved by: ken