Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

libarchive: Remove MIPS build glue.

Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D39329

libarchive: Add missing MLINK.

Differential Revision: https://reviews.freebsd.org/D37398

libarchive: fix mismatch between library and test configuration

I was investigating libarchive test failures on CheriBSD and it turns out
we get a reproducible SIGBUS for test_archive_m5, etc. Debug

libarchive: fix mismatch between library and test configuration

I was investigating libarchive test failures on CheriBSD and it turns out
we get a reproducible SIGBUS for test_archive_m5, etc. Debugging this shows
that libarchive and the tests disagree when it comes to the definition of
archive_md5_ctx: libarchive assumes it's the OpenSSL type whereas the test
use the libmd type. The latter is not necessarily aligned enough to store
a pointer (16 bytes for CHERI RISC-V), so we were crashing when storing
EVP_MD_CTX* to an 8-byte-aligned archive_md5_ctx.

To avoid problems like this in the future, factor out the common compiler
flags into a Makefile.inc and include that from the tests Makefile.

Reviewed By: lwhsu
Differential Revision: https://reviews.freebsd.org/D26469

show more ...

Remove sparc64 specific warning suppression.

Add native support for zstd to libarchive

Note that old pkg will failed to build after this. A recent ports tree (one
providing pkg 1.12+) is required to build. Older already built pkg, should
conti

Add native support for zstd to libarchive

Note that old pkg will failed to build after this. A recent ports tree (one
providing pkg 1.12+) is required to build. Older already built pkg, should
continue working as expected

PR: 238797
Exp run by: antoine
Reviewed by: cem
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20752

show more ...

Revert r340997 at the request of multiple users.
- breaks ports-mgmt/pkg build for mips64, powerpc64 and i386 for some users.

--- pkg-static ---
/usr/lib/liblzma.a(stream_encoder_mt.o): In function

Revert r340997 at the request of multiple users.
- breaks ports-mgmt/pkg build for mips64, powerpc64 and i386 for some users.

--- pkg-static ---
/usr/lib/liblzma.a(stream_encoder_mt.o): In function `mythread_cond_init':
/usr/local/poudriere/jails/ppc64/usr/src/contrib/xz/src/common/mythread.h:230:
undefined reference to `pthread_condattr_init'

Reported by: jhibbits zeising

show more ...

libarchive configuration changes
- move HAVE_BZLIB_H, HAVE_LIBLZMA and HAVE_LZMA_H to config_freebsd.h
- activate support for multi-threaded lzma encoding [1]

PR: 233543 [1]
Reported by: cem
MFC af

libarchive configuration changes
- move HAVE_BZLIB_H, HAVE_LIBLZMA and HAVE_LZMA_H to config_freebsd.h
- activate support for multi-threaded lzma encoding [1]

PR: 233543 [1]
Reported by: cem
MFC after: 1 week

show more ...

Add HAS_TESTS to all Makefiles that are currently using the
`SUBDIR.${MK_TESTS}+= tests` idiom.

This is a follow up to r321912.

Convert traditional ${MK_TESTS} conditional idiom for including test
directories to SUBDIR.${MK_TESTS} idiom

This is being done to pave the way for future work (and homogenity) in
^/projects/make-ch

Convert traditional ${MK_TESTS} conditional idiom for including test
directories to SUBDIR.${MK_TESTS} idiom

This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .

No functional change intended.

MFC after: 1 weeks

show more ...

Commit the 64-bit inode project.

Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_na

Commit the 64-bit inode project.

Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.

ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.

Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.

Struct xvnode changed layout, no compat shims are provided.

For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.

Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.

Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).

Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439

show more ...

Use SRCTOP-relative paths to other directories instead of .CURDIR-relative ones

This implifies pathing in make/displayed output

MFC after: 3 weeks
Sponsored by: Dell EMC Isilon

Create a new MACHINE_ARCH for Freescale PowerPC e500v2

Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector p

Create a new MACHINE_ARCH for Freescale PowerPC e500v2

Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).

Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.

Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.

Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.

Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.

Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683

show more ...

First pass through library packaging.

Sponsored by: The FreeBSD Foundation

Don't override LIB*DIR variables from src.libnames.mk.

MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division

Integrate the tests from lib/libarchive, usr.bin/cpio, and usr.bin/tar in to
the FreeBSD test suite

functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around liba

Integrate the tests from lib/libarchive, usr.bin/cpio, and usr.bin/tar in to
the FreeBSD test suite

functional_test.sh was ported from bin/sh/tests/functional_test.sh, as a
small wrapper around libarchive_test, bsdcpio_test, and bsdtar_test provided
by upstream.

A handful of testcases in lib/libarchive/tests have been disabled as they
were failing when run with kyua test (see BROKEN_TESTS in
lib/libarchive/tests/Makefile)

As a sidenote: this removes the check/test targets from the Makefiles as they
don't match the pattern used in the rest of the FreeBSD test suite.

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division

show more ...

Drop libarchive.pc

We want to ensure we always use libarchive from ports in the ports tree.
It simplifies ports maintainance and anyway libarchive.pc was not reflecting the
different way libarchive

Drop libarchive.pc

We want to ensure we always use libarchive from ports in the ports tree.
It simplifies ports maintainance and anyway libarchive.pc was not reflecting the
different way libarchive can be built in base

show more ...

Remove the const qualifier from iconv(3) to comply with POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html

Adjust all code that calls iconv.

PR: 199099
Exp-run by: antoine

Remove the const qualifier from iconv(3) to comply with POSIX:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/iconv.html

Adjust all code that calls iconv.

PR: 199099
Exp-run by: antoine
MFC after: 2 weeks

show more ...

Convert libraries to use LIBADD
While here reduce a bit overlinking

Add pkg-config file for libarchive

Requested by: bapt
MFC after: 1 week

Remove ia64.

This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in com

Remove ia64.

This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation

This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h

Discussed at: BSDcan

show more ...

Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.

Temporarily disable iconv for non-shared library builds. The dynamic
loading of conversation table is not yet compatible with static builds.

Approved by: re (gjb)

Remove several MLINKS that were listed twice.

Backport NFSv4 ACL fix from libarchive master branch.

Source:
https://github.com/libarchive/libarchive/commit/f67370d5

Obtained from: libarchive (master branch)