Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

csu: move common code to libc

Why? Most trivial point, it shaves around 600 bytes from the dynamic
binaries on amd64. Less trivial, the removed code is no longer part of
the ABI, and we can ship upd

csu: move common code to libc

Why? Most trivial point, it shaves around 600 bytes from the dynamic
binaries on amd64. Less trivial, the removed code is no longer part of
the ABI, and we can ship updates to it with libc updates. Right now most
of the csu is linked into the binaries and require us to do somewhat
tricky ABI compat when it needs to change. For instance, the init_array
change would be much simpler and does not require note tagging if we
have init calling code in libc.

This could be improved more, by splitting dynamic and static
initialization. For instance, &_DYNAMIC tests can be removed then.
Such change, nonetheless, would require building libc three times.
I left this for later, after this change stabilizes, if ever.

Reviewed by: markj
Discussed with: jrtc27 (some objections, see the review), imp
Tested by: markj (aarch64)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D37220

show more ...

Consolidate duplicated logic in csu Makefiles to lib/csu/Makefile.inc.

Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25537

Remove the sed hack for ABI tag notes.

The ELF notes compiled in C were placed in a section with the wrong type
(SHT_PROGBITS instead of SHT_NOTE). Previously, sed was used on the
generated assembl

Remove the sed hack for ABI tag notes.

The ELF notes compiled in C were placed in a section with the wrong type
(SHT_PROGBITS instead of SHT_NOTE). Previously, sed was used on the
generated assembly to rewrite the section type. Instead, write the notes
in assembly which permits setting the correct section type directly.

While here, move inline assembly entry points out of C and into assembly
for aarch64, arm, and riscv.

Reviewed by: kib
Tested on: amd64 (cirrus-ci), riscv64
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25211

show more ...

powerpc64/csu: Rename dummy asm file to force use of 'cc'

Implicit make rules build .S asm files with the compiler, rather than the
assembler. r356889 removed GNU as from the build for powerpc targ

powerpc64/csu: Rename dummy asm file to force use of 'cc'

Implicit make rules build .S asm files with the compiler, rather than the
assembler. r356889 removed GNU as from the build for powerpc targets,
causing '.s' asm files to fail to build, due to a missing 'as'. Rename the
one dummy asm file we have to a '.S' to force the implicit rules to build
with the compiler rather than the assembler.

Reported by: Francis Little

show more ...

[PPC64] Add ifunc support in libcsu

When ifuncs are used in statically linked binaries, the C runtime
must perform the needed dynamic relocations, to make calls to ifuncs
work correctly.

Reviewed b

[PPC64] Add ifunc support in libcsu

When ifuncs are used in statically linked binaries, the C runtime
must perform the needed dynamic relocations, to make calls to ifuncs
work correctly.

Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D21070

show more ...

Create crtsavres.o for powerpc builds

Summary:
GCC expects to link in a crtsavres.o on powerpc platforms. On
powerpc64 this is an empty file, but on powerpc and powerpcspe this does contain
some sa

Create crtsavres.o for powerpc builds

Summary:
GCC expects to link in a crtsavres.o on powerpc platforms. On
powerpc64 this is an empty file, but on powerpc and powerpcspe this does contain
some save/restore functions, which may not actually be necessary for newer
modern GCC and clang. This appeases the in-tree gcc, though, and is needed in
order to switch to the BSD CRTRBEGIN.

PR: 233751
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D18826

show more ...

Process irelocs for statically linked binaries from crt1 on x86.

This makes statically linked binaries with ifuncs operational.

Reported and tested by: mjg
Reviewed by: emaste, markj
Sponsored by:

Process irelocs for statically linked binaries from crt1 on x86.

This makes statically linked binaries with ifuncs operational.

Reported and tested by: mjg
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D17363

show more ...

Rework r234502 to include a modified CFLAGS along with ACFLAGS.

On most architectures crt objects are compiled in a multiple-step process
so that sed can be run on the generated assembly. As the fi

Rework r234502 to include a modified CFLAGS along with ACFLAGS.

On most architectures crt objects are compiled in a multiple-step process
so that sed can be run on the generated assembly. As the final step,
the C compiler generates an object file from the modified assembly output.
Currently this last step uses $CC with only $ACFLAGS. However, for other
uses in the tree, $ACFLAGS is meant to include assembly-specific compiler
flags that are in addition to $CFLAGS (see default .S.o rules
bsd.suffixes.mk). In particular, external toolchains may require
additional flags to select a non-default target which will be present
in CFLAGS but not ACFLAGS. To support this while still mitigating the
issue with CFLAGS described in r234502, include a modified CFLAGS that
excludes "-g" when assembling the modified assembly files.

Note that normally an assembler ($AS) is used to assemble .s flags to
object files (see bsd.suffixes.mk). However, llvm-based toolchains do
not currently have a stand-alone assembler.

Reviewed by: imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10085

show more ...

Clang in base now supports -mlongcall, so remove this hack

PR: 215947
MFC after: 2 weeks

Use SRCTOP-relative paths and .CURDIR with :H instead of ".." specified paths

This implifies pathing in make/displayed output

MFC after: 3 weeks
Sponsored by: Dell EMC Isilon

Don't reset CC away from full-pathed gcc.

This was breaking the build when using CROSS_TOOLCHAIN=powerpc64-gcc

Sponsored by: EMC / Isilon Storage Division

Fix installation of 32bit libraries after r288074.

FILES is not used when LIBRARIES_ONLY is set, which is used to build and
install the lib32 sysroot. All of the csu files do quality as "libraries"

Fix installation of 32bit libraries after r288074.

FILES is not used when LIBRARIES_ONLY is set, which is used to build and
install the lib32 sysroot. All of the csu files do quality as "libraries"
for this case so just undefine LIBRARIES_ONLY.

This is still better than the previous realinstall handling as it does
not hook into META_MODE properly.

Sponsored by: EMC / Isilon Storage Division

show more ...

Replace realinstall: and META_MODE staging hacks with FILES mechanism.

This partially reverts r270170 for lib/csu/i386 while retaining the
change for using bsd.lib.mk.

These FILES groups could go i

Replace realinstall: and META_MODE staging hacks with FILES mechanism.

This partially reverts r270170 for lib/csu/i386 while retaining the
change for using bsd.lib.mk.

These FILES groups could go into lib/csu/Makefile.inc but I've kept them
in the Makefiles for clarity.

Sponsored by: EMC / Isilon Storage Division

show more ...

Add a comment explaining why gcc is needed.

X-MFC-With: 278231
MFC after: 2 weeks

powerpc64 csu needs to be built by gcc, so enforce that.

With this change, world is one step closer to being clang-able.

MFC after: 2 weeks

After r217375, some startup objects under lib/csu are built in a special
way: first they are compiled to assembly, then some sed'ing is done on
the assembly, and lastly the assembly is compiled to an

After r217375, some startup objects under lib/csu are built in a special
way: first they are compiled to assembly, then some sed'ing is done on
the assembly, and lastly the assembly is compiled to an object file.

This last step is done using ${CC}, and not ${AS}, because when the
compiler is clang, it outputs directives that are too advanced for our
old gas. So we use clang's integrated assembler instead. (When the
compiler is gcc, it just calls gas, and nothing is different, except one
extra fork.)

However, in the .s to .o rules in lib/csu/$ARCH/Makefile, I still passed
CFLAGS to the compiler, instead of ACFLAGS, which are specifically for
compiling .s files.

In case you are using '-g' for debug info anywhere in your CFLAGS, it
causes the .s files to already contain debug information in the assembly
itself. In the next step, the .s files are also compiled using '-g',
and if the compiler is clang, it complains: "error: input can't have
.file dwarf directives when -g is used to generate dwarf debug info for
assembly code".

Fix this by using ${ACFLAGS} for compiling the .s files instead.

Reported by: jasone
MFC after: 1 week

show more ...

Work around a binutils bug on powerpc64 where the TOC would not be
properly reloaded when calling _fini() in large binaries with multiple
TOC sections (e.g. GCC), leading to a segmentation fault. Add

Work around a binutils bug on powerpc64 where the TOC would not be
properly reloaded when calling _fini() in large binaries with multiple
TOC sections (e.g. GCC), leading to a segmentation fault. Adding -mlongcall
to crt1 flags causes the compiler to emit explicit TOC load instructions
for all function calls, including _fini().

Reviewed by: kib
Pointy hat to: kib

show more ...

Stop calling _init/_fini methods from crt1 for dynamic binaries. Do
call preinit, init and fini arrays methods from crt1 for static binaries.

Mark new crt1 with FreeBSD-specific ELF note.

Move som

Stop calling _init/_fini methods from crt1 for dynamic binaries. Do
call preinit, init and fini arrays methods from crt1 for static binaries.

Mark new crt1 with FreeBSD-specific ELF note.

Move some common crt1 code into new MI file ignore_init.c, to reduce
duplication. Also, conservatively adjust nearby sources for style.

Reviewed by: kan
Tested by: andrew (arm), flo (sparc64)
MFC after: 3 weeks

show more ...

Build Scrt.o on powerpc64. Its introduction on other platforms got lost
during the period of time the powerpc64 port was on a project branch.

Apply a workaround for a binutils issue with the .note.ABI-tag section
generated from lib/csu/common/crtbrand.c (which ultimately ends up in
executables and shared libraries, via crt1.o, gcrt1.o or S

Apply a workaround for a binutils issue with the .note.ABI-tag section
generated from lib/csu/common/crtbrand.c (which ultimately ends up in
executables and shared libraries, via crt1.o, gcrt1.o or Scrt1.o).

For all arches except sparc, gcc emits the section directive for the
abitag struct in crtbrand.c with a PROGBITS type. However, newer
versions of binutils (after 2.16.90) require the section to be of NOTE
type, to guarantee that the .note.ABI-tag section correctly ends up in
the first page of the final executable.

Unfortunately, there is no clean way to tell gcc to use another section
type, so crtbrand.c (or the C files that include it) must be compiled in
multiple steps:

- Compile the .c file to a .s file.
- Edit the .s file to change the 'progbits' type to 'note', for the section
directive that defines the .note.ABI-tag section.
- Compile the .s file to an object file.

These steps are done in the invididual Makefiles for each applicable arch.

Reviewed by: kib

show more ...

C startup support for 64-bit PowerPC.

Obtained from: projects/ppc64