ipfw: Introduce dnctl

Introduce a link to the ipfw command, dnctl, for dummynet configuration.
dnctl only handles dummynet configuration, and is part of the effort to
support dummynet in pf.

/sbin/

ipfw: Introduce dnctl

Introduce a link to the ipfw command, dnctl, for dummynet configuration.
dnctl only handles dummynet configuration, and is part of the effort to
support dummynet in pf.

/sbin/ipfw continues to accept pipe, queue and sched commands, but these can
now also be issued via the new dnctl command.

Reviewed by: donner
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30465

(cherry picked from commit 0b95680e077b7ef5bc6930c7c0f1a41106251d5d)

show more ...

ipfw(8): Fix most warnings with the default WARNS level.

- Add missing const and static qualifiers.
- Avoid shadowing the global "co" by renaming it to "g_co".
- Avoid mixing signedness in loop boun

ipfw(8): Fix most warnings with the default WARNS level.

- Add missing const and static qualifiers.
- Avoid shadowing the global "co" by renaming it to "g_co".
- Avoid mixing signedness in loop bound checks.
- Leave -Wcast-align warnings disabled for now.

Reviewed by: ae, melifaro
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25456

show more ...

Add NAT64 CLAT implementation as defined in RFC6877.

CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is imple

Add NAT64 CLAT implementation as defined in RFC6877.

CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.

# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in

Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC

show more ...

Allow jail names (not just IDs) to be specified for: cpuset(1), ipfw(8),
sockstat(1), ugidfw(8)
These are the last of the jail-aware userland utilities that didn't work
with names.

PR: 229266
MFC

Allow jail names (not just IDs) to be specified for: cpuset(1), ipfw(8),
sockstat(1), ugidfw(8)
These are the last of the jail-aware userland utilities that didn't work
with names.

PR: 229266
MFC after: 3 days
Differential Revision: D16047

show more ...

Add ipfw_nat64 module that implements stateless and stateful NAT64.

The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action w

Add ipfw_nat64 module that implements stateless and stateful NAT64.

The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.

A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.

Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.

A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.

Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434

show more ...

Add ipfw_nptv6 module that implements Network Prefix Translation for IPv6
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is load

Add ipfw_nptv6 module that implements Network Prefix Translation for IPv6
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.

Reviewed by: hrs
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6420

show more ...

Create packages for atm, ccdconfig, devd, ipf, ipfw,
iscsi, natd, nandfs, pf, quotacheck, and routed.

Add ping6 and rtsol to the runtime package.

Sponsored by: The FreeBSD Foundation

Convert sbin/ to LIBADD
Reduce overlinking

Move further to eliminate next pieces of number-assuming code inside tables.

Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table

Move further to eliminate next pieces of number-assuming code inside tables.

Kernel changes:
* Add IP_FW_OBJ_FLUSH opcode (flush table based on its name/set)
* Add IP_FW_OBJ_DUMP opcode (dumps table data based on its names/set)
* Add IP_FW_OBJ_LISTSIZE / IP_FW_OBJ_LIST opcodes (get list of kernel tables)

Userland changes:
* move tables code to separate tables.c file
* get rid of tables_max
* switch "all"/list handling to new opcodes

show more ...

Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.

Fix world build WITHOUT_PF.

Sponsored by: Nginx, Inc.

MFC of a large number of ipfw and dummynet fixes and enhancements
done in CURRENT over the last 4 months.
HEAD and RELENG_8 are almost in sync now for ipfw, dummynet
the pfil hooks and related compon

MFC of a large number of ipfw and dummynet fixes and enhancements
done in CURRENT over the last 4 months.
HEAD and RELENG_8 are almost in sync now for ipfw, dummynet
the pfil hooks and related components.

Among the most noticeable changes:
- r200855 more efficient lookup of skipto rules, and remove O(N)
blocks from critical sections in the kernel;
- r204591 large restructuring of the dummynet module, with support
for multiple scheduling algorithms (4 available so far)
See the original commit logs for details.

Changes in the kernel/userland ABI should be harmless because the
kernel is able to understand previous requests from RELENG_8 and
RELENG_7. For this reason, this changeset would be applicable
to RELENG_7 as well, but i am not sure if it is worthwhile.

show more ...

add back DPADD (removed by mistake in a previous commit)

Bring in the most recent version of ipfw and dummynet, developed
and tested over the past two months in the ipfw3-head branch. This
also happens to be the same code available in the Linux and Window

Bring in the most recent version of ipfw and dummynet, developed
and tested over the past two months in the ipfw3-head branch. This
also happens to be the same code available in the Linux and Windows
ports of ipfw and dummynet.

The major enhancement is a completely restructured version of
dummynet, with support for different packet scheduling algorithms
(loadable at runtime), faster queue/pipe lookup, and a much cleaner
internal architecture and kernel/userland ABI which simplifies
future extensions.

In addition to the existing schedulers (FIFO and WF2Q+), we include
a Deficit Round Robin (DRR or RR for brevity) scheduler, and a new,
very fast version of WF2Q+ called QFQ.

Some test code is also present (in sys/netinet/ipfw/test) that
lets you build and test schedulers in userland.

Also, we have added a compatibility layer that understands requests
from the RELENG_7 and RELENG_8 versions of the /sbin/ipfw binaries,
and replies correctly (at least, it does its best; sometimes you
just cannot tell who sent the request and how to answer).
The compatibility layer should make it possible to MFC this code in a
relatively short time.

Some minor glitches (e.g. handling of ipfw set enable/disable,
and a workaround for a bug in RELENG_7's /sbin/ipfw) will be
fixed with separate commits.

CREDITS:
This work has been partly supported by the ONELAB2 project, and
mostly developed by Riccardo Panicucci and myself.
The code for the qfq scheduler is mostly from Fabio Checconi,
and Marta Carbone and Francesco Magno have helped with testing,
debugging and some bug fixes.

show more ...

Fixed dependencies (make checkdpadd).

- fix dummynet 'fast' mode for WF2Q case.
- fix printing of pipe profile data.
- introduce new pipe parameter: 'burst' - how much data can be sent through
pipe bypassing bandwidth limit.

put the altq-related functions into a separate file.
Minor cleanup of the includes used by the various source files,
including annotations of why certain headers are used.

fix printing of uint64_t values, so we can use WARNS=2

Put nat and ipv6 support in their own files.

Usual moving of code with no changes from ipfw2.c to the
newly created files, and addition of prototypes to ipfw2.h

I have added forward declarations fo

Put nat and ipv6 support in their own files.

Usual moving of code with no changes from ipfw2.c to the
newly created files, and addition of prototypes to ipfw2.h

I have added forward declarations for ipfw_insn_* in ipfw2.h
to avoid a global dependency on ip_fw.h

show more ...

never mind, for the time being let's stick with WARNS=0 until
we sort out all proper printf formats.

Start splitting the monster file in smaller blocks.

In this episode:
- introduce a common header with a minimal set of common definitions;
- bring the main() function and options parser in main.c
-

Start splitting the monster file in smaller blocks.

In this episode:
- introduce a common header with a minimal set of common definitions;
- bring the main() function and options parser in main.c
- rename the main functions with an ipfw_ prefix

No code changes except for the introduction of a global variable,
resvd_set_number, which stores the RESVD_SET value from ip_fw.h
and is used to remove the dependency of main.c from ip_fw.h
(and the subtree of dependencies) for just a single constant.

show more ...

I believe this is safe to build with WARNS=2 now

Remove blindly-copied extra include path.

Add to IPFW the ability to do ALTQ classification/tagging.

Uncommented WARNS=0. ipfw2.c is full of printf format errors that are
fatal on alphas.

Fixed setting of WARNS. WARNS should never be set unconditionally, since
this breaks testing of different WAR

Uncommented WARNS=0. ipfw2.c is full of printf format errors that are
fatal on alphas.

Fixed setting of WARNS. WARNS should never be set unconditionally, since
this breaks testing of different WARNS values by setting it at a higher
level (e.g., on the command line).

show more ...