|
Revision tags: release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0, release/10.4.0, release/11.1.0 |
|
| #
193d9e76 |
| 04-Mar-2017 |
Enji Cooper <[email protected]> |
sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic
Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0 |
|
| #
f8241f0c |
| 09-Nov-2013 |
Adrian Chadd <[email protected]> |
Strip out this cruft; people should be making modules with a complete
kernel config environment anyway.
|
|
Revision tags: release/9.2.0, release/8.4.0, release/9.1.0 |
|
| #
dc8cf3fc |
| 22-May-2012 |
Ulrich Spörlein <[email protected]> |
Fix make depend.
|
|
Revision tags: release/8.3.0, release/7.4.0, release/8.2.0, release/8.1.0, release/7.3.0, release/8.0.0 |
|
| #
12e36acb |
| 03-May-2009 |
Warner Losh <[email protected]> |
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to cre
Bring in Andrew Thompson's port of Sepherosa Ziehau's bwi driver for
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
show more ...
|