net/failsafe: fix secondary process probe

Remove the vdev args check for secondary process which prevents the
secondary from attaching to the device created by the primary process
via the hotplug fr

net/failsafe: fix secondary process probe

Remove the vdev args check for secondary process which prevents the
secondary from attaching to the device created by the primary process
via the hotplug framework. This check was removed for other vdevs but
was missed for failsafe.

Fixes: 4852aa8f6e21 ("drivers/net: enable hotplug on secondary process")
Cc: [email protected]

Signed-off-by: Kumara Parameshwaran <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

drivers/net: advertise no support for keeping flow rules

When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced

drivers/net: advertise no support for keeping flow rules

When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced. Explicitly reset it in all PMDs
supporting rte_flow API in order to attract the attention
of maintainers, who should eventually choose to advertise
the new capability or not. It is already known that
mlx4 and mlx5 will not support this capability.

For RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP
similar action is not performed,
because no PMD except mlx5 supports indirect actions.
Any PMD that starts doing so will anyway have to consider
all relevant API, including this capability.

Suggested-by: Ferruh Yigit <[email protected]>
Signed-off-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers acce

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.

Signed-off-by: Harman Kalra <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>
Signed-off-by: David Marchand <[email protected]>
Tested-by: Raslan Darawsheh <[email protected]>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Jerin Jacob <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Acked-by: Somnath Kotur <[email protected]>

show more ...

ethdev: remove jumbo offload flag

Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.

Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_in

ethdev: remove jumbo offload flag

Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.

Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.

And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.

Removing this additional configuration for simplification.

Suggested-by: Konstantin Ananyev <[email protected]>
Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Rosen Xu <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Huisong Li <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>
Acked-by: Michal Krawczyk <[email protected]>

show more ...

ethdev: change queue release callback

Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane

ethdev: change queue release callback

Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.

To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted

Signed-off-by: Xueming Li <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>

show more ...

eal: remove sys/queue.h from public headers

Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSI

eal: remove sys/queue.h from public headers

Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.

One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.

The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).

Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.

[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html

Suggested-by: Nick Connolly <[email protected]>
Suggested-by: Dmitry Kozlyuk <[email protected]>
Signed-off-by: William Tu <[email protected]>
Acked-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Narcisa Vasile <[email protected]>

show more ...

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: A

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: Aman Deep Singh <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower ca

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.

Signed-off-by: Aman Deep Singh <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...