fix spelling in comments and strings

The tool comes from https://github.com/jsoref

Signed-off-by: Josh Soref <[email protected]>
Signed-off-by: Thomas Monjalon <[email protected]>

drivers: check interrupt file descriptor validity

This patch fixes coverity issue by adding a check for negative value to
avoid bad bit shift operation and other invalid use of file descriptors.

Co

drivers: check interrupt file descriptor validity

This patch fixes coverity issue by adding a check for negative value to
avoid bad bit shift operation and other invalid use of file descriptors.

Coverity issue: 373717, 373697, 373685
Coverity issue: 373723, 373720, 373719, 373718, 373715, 373714, 373713
Coverity issue: 373710, 373707, 373706, 373705, 373704, 373701, 373700
Coverity issue: 373698, 373695, 373692, 373690, 373689
Coverity issue: 373722, 373721, 373709, 373702, 373696
Fixes: d61138d4f0e2 ("drivers: remove direct access to interrupt handle")

Signed-off-by: Harman Kalra <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Acked-by: David Marchand <[email protected]>

show more ...

drivers/net: advertise no support for keeping flow rules

When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced

drivers/net: advertise no support for keeping flow rules

When RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP capability bit is zero,
the specified behavior is the same as it had been before
this bit was introduced. Explicitly reset it in all PMDs
supporting rte_flow API in order to attract the attention
of maintainers, who should eventually choose to advertise
the new capability or not. It is already known that
mlx4 and mlx5 will not support this capability.

For RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP
similar action is not performed,
because no PMD except mlx5 supports indirect actions.
Any PMD that starts doing so will anyway have to consider
all relevant API, including this capability.

Suggested-by: Ferruh Yigit <[email protected]>
Signed-off-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers acce

drivers: remove direct access to interrupt handle

Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.

Signed-off-by: Harman Kalra <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>
Signed-off-by: David Marchand <[email protected]>
Tested-by: Raslan Darawsheh <[email protected]>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Jerin Jacob <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Acked-by: Somnath Kotur <[email protected]>

show more ...

ethdev: move MTU set check to library

Move requested MTU value check to the API to prevent the duplicated
code.

Signed-off-by: Ferruh Yigit <[email protected]>
Reviewed-by: Andrew Rybchenko <a

ethdev: move MTU set check to library

Move requested MTU value check to the API to prevent the duplicated
code.

Signed-off-by: Ferruh Yigit <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Rosen Xu <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>

show more ...

ethdev: move jumbo frame offload check to library

Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.

When

ethdev: move jumbo frame offload check to library

Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.

When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.

Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.

This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.

Signed-off-by: Ferruh Yigit <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Rosen Xu <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Huisong Li <[email protected]>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Huisong Li <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>

show more ...

drivers/net: remove queue xstats auto-fill flag

Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.

Fixes: f30e69b41f94 ("ethdev: add d

drivers/net: remove queue xstats auto-fill flag

Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.

Fixes: f30e69b41f94 ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: [email protected]

Signed-off-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

ethdev: remove legacy Rx descriptor done API

rte_eth_rx_descriptor_status() should be used as a replacement.

Signed-off-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Ferruh Yigi

ethdev: remove legacy Rx descriptor done API

rte_eth_rx_descriptor_status() should be used as a replacement.

Signed-off-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>
Acked-by: Thomas Monjalon <[email protected]>

show more ...

ethdev: improve xstats names by IDs get prototype

Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.

Signed-off-by: Andrew

ethdev: improve xstats names by IDs get prototype

Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.

Signed-off-by: Andrew Rybchenko <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>

show more ...

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: A

net: add macro to extract MAC address bytes

Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.

Signed-off-by: Aman Deep Singh <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower ca

net: add macro for MAC address print

Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.

Signed-off-by: Aman Deep Singh <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

drivers/net: fix FW version query

Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition

drivers/net: fix FW version query

Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'

Fixes: bb42aa9ffe4e ("net/atlantic: configure device start/stop")
Fixes: ff70acdf4299 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20a0 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2ca5 ("net/dpaa: support firmware version get API")
Fixes: 748eccb97cdc ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a24 ("net/e1000: add firmware version get")
Fixes: 293430677e9c ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460cd ("net/hns3: support some device operations")
Fixes: bd5b86732bc7 ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e976 ("net/i40e: add firmware version get")
Fixes: e31cb9a36298 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac3d ("net/igc: implement device base operations")
Fixes: eec10fb0ce6b ("net/ionic: support FW version")
Fixes: 8b0b56574269 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc02 ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f12e ("net/qede: support FW version query")
Fixes: 83fef46a22b2 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fadef ("net/txgbe: support getting FW version")
Fixes: 21913471202f ("ethdev: add firmware version get")
Cc: [email protected]

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Acked-by: Rasesh Mody <[email protected]>
Acked-by: Jiawen Wu <[email protected]>
Acked-by: Beilei Xing <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/e1000: fix max Rx packet size

According to E1000_ETH_OVERHEAD definition, max_rx_pkt_len contains
one VLAN tag size. Therefore when config RLPML register, if dual VLAN
not enabled there is no ne

net/e1000: fix max Rx packet size

According to E1000_ETH_OVERHEAD definition, max_rx_pkt_len contains
one VLAN tag size. Therefore when config RLPML register, if dual VLAN
not enabled there is no need to add VLAN tag size to max_rx_pkt_len,
otherwise only one another VLAN tag size should be added to.

Fixes: e51abef39382 ("igb: fix max RX packet size and support dual VLAN")
Cc: [email protected]

Signed-off-by: Alvin Zhang <[email protected]>
Tested-by: Lingli Chen <[email protected]>
Acked-by: Haiyue Wang <[email protected]>

show more ...

ethdev: validate input in module EEPROM dump

The validity verification of input parameters should be performed at
API layer, not in the PMD.

Fixes: 3a18c44b45df ("ethdev: add access to EEPROM")
Fix

ethdev: validate input in module EEPROM dump

The validity verification of input parameters should be performed at
API layer, not in the PMD.

Fixes: 3a18c44b45df ("ethdev: add access to EEPROM")
Fixes: 40ff8b305ab8 ("net/e1000: add module EEPROM callbacks for e1000")
Fixes: f2088e785cca ("net/i40e: fix dereference before check when getting EEPROM")
Fixes: b74d0cd43e37 ("net/ixgbe: add module EEPROM callbacks for ixgbe")
Fixes: 8a6a09f853a0 ("net/mlx5: support reading module EEPROM data")
Fixes: 58f6f93c34c1 ("net/octeontx2: add module EEPROM dump")
Cc: [email protected]

Signed-off-by: Chengchang Tang <[email protected]>
Signed-off-by: Min Hu (Connor) <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net/e1000: fix Rx error counter for bad length

When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive

net/e1000: fix Rx error counter for bad length

When the size of a packet in Rx channel is less than the minimum
or greater than the maximum, the packet will be simultaneously
counted by RLEC(Receive Length Error Count) and
RUC(Receive Under Size Count)/ROC(Receive Oversize Count) registers.

This patch fixes the issue of counting a length error packet twice
when counting the total number of received error packets.

Fixes: 70bdb18657da ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Cc: [email protected]

Signed-off-by: Alvin Zhang <[email protected]>
Acked-by: Haiyue Wang <[email protected]>

show more ...

drivers: fix log level after loading

When compiled as a shared object, and loaded at runtime as a plugin,
the drivers should get the log level set earlier at EAL init
by the user through --log-level

drivers: fix log level after loading

When compiled as a shared object, and loaded at runtime as a plugin,
the drivers should get the log level set earlier at EAL init
by the user through --log-level option.

The function for applying the log level setting is
rte_log_register_type_and_pick_level().
It is called by most drivers via RTE_LOG_REGISTER().

The drivers common/mlx5, bcmfs and e1000 were missing,
so the user-specified log level was not applied when
those drivers were loaded as plugins.
The macro RTE_LOG_REGISTER() is used for those drivers.

The unnecessary protection for double registration
is removed from e1000.

Fixes: 9c99878aa1b1 ("log: introduce logtype register macro")
Fixes: c8e79da7c676 ("crypto/bcmfs: introduce BCMFS driver")
Cc: [email protected]

Signed-off-by: Thomas Monjalon <[email protected]>
Reviewed-by: David Marchand <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>

show more ...

ethdev: replace callback getting filter operations

Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of ge

ethdev: replace callback getting filter operations

Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.

The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.

Signed-off-by: Thomas Monjalon <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net/e1000: remove MTU setting limitation

Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.

This patch allows setting this s

net/e1000: remove MTU setting limitation

Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.

This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.

After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.

Fixes: 59d0ecdbf0e1 ("ethdev: MTU accessors")
Cc: [email protected]

Signed-off-by: Dapeng Yu <[email protected]>
Acked-by: Jeff Guo <[email protected]>

show more ...

net/e1000: fix flow control mode setting

E1000_CTRL register should be updated according to fc_conf->mode's
value.

Fixes: af75078fece3 ("first public release")
Cc: [email protected]

Signed-off-by: W

net/e1000: fix flow control mode setting

E1000_CTRL register should be updated according to fc_conf->mode's
value.

Fixes: af75078fece3 ("first public release")
Cc: [email protected]

Signed-off-by: Wenjun Wu <[email protected]>
Acked-by: Jeff Guo <[email protected]>

show more ...

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by:

ethdev: make driver-only headers private

The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.

Signed-off-by: Bruce Richardson <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Acked-by: Thomas Monjalon <[email protected]>
Acked-by: Steven Webster <[email protected]>

show more ...

net/e1000: fix jumbo frame flag condition for MTU set

The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That wil

net/e1000: fix jumbo frame flag condition for MTU set

The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.

This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.

Fixes: ef990fb56e55 ("net/e1000: convert to new Rx offloads API")
Cc: [email protected]

Signed-off-by: Steve Yang <[email protected]>
Acked-by: Jeff Guo <[email protected]>

show more ...

ethdev: remove legacy N-tuple filter type support

Instead of N-tuple filter RTE flow API should be used.

Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines

ethdev: remove legacy N-tuple filter type support

Instead of N-tuple filter RTE flow API should be used.

Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.

Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.

Signed-off-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

ethdev: remove legacy SYN filter type support

Instead of SYN filter RTE flow API should be used.

Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.

ethdev: remove legacy SYN filter type support

Instead of SYN filter RTE flow API should be used.

Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.

Signed-off-by: Andrew Rybchenko <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...