fix spelling in comments and strings

The tool comes from https://github.com/jsoref

Signed-off-by: Josh Soref <[email protected]>
Signed-off-by: Thomas Monjalon <[email protected]>

net/dpaa2: support Tx flow redirection action

TX redirection support by flow action RTE_FLOW_ACTION_TYPE_PHY_PORT
and RTE_FLOW_ACTION_TYPE_PORT_ID

This action is executed by HW to forward packets b

net/dpaa2: support Tx flow redirection action

TX redirection support by flow action RTE_FLOW_ACTION_TYPE_PHY_PORT
and RTE_FLOW_ACTION_TYPE_PORT_ID

This action is executed by HW to forward packets between ports.
If the ingress packets match the rule, the packets are switched
without software involved and perf is improved as well.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

ethdev: replace callback getting filter operations

Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of ge

ethdev: replace callback getting filter operations

Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.

The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.

Signed-off-by: Thomas Monjalon <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Haiyue Wang <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net/dpaa2: fix check for key size

DPAA2 has support for raw flow classification, which can
be used for any protocol rules. This change fixes flow key
pattern length match boundary condition with spe

net/dpaa2: fix check for key size

DPAA2 has support for raw flow classification, which can
be used for any protocol rules. This change fixes flow key
pattern length match boundary condition with spec length.

Fixes: 3f881f8d6eb0 ("net/dpaa2: support raw flow classification")
Cc: [email protected]

Signed-off-by: Apeksha Gupta <[email protected]>
Acked-by: Nipun Gupta <[email protected]>

show more ...

net/dpaa2: support raw flow classification

Add support for raw flow, which can be used for any
protocol rules.

Signed-off-by: Nipun Gupta <[email protected]>
Acked-by: Hemant Agrawal <hemant.agra

net/dpaa2: support raw flow classification

Add support for raw flow, which can be used for any
protocol rules.

Signed-off-by: Nipun Gupta <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: support flow API FS miss action configuration

1) dpni_set_rx_hash_dist and dpni_set_rx_fs_dist used for TC
configuration instead of dpni_set_rx_tc_dist. Otherwise,
re-configuration

net/dpaa2: support flow API FS miss action configuration

1) dpni_set_rx_hash_dist and dpni_set_rx_fs_dist used for TC
configuration instead of dpni_set_rx_tc_dist. Otherwise,
re-configuration of default TC of QoS fails.

2) Default miss action is to drop. "export
DPAA2_FLOW_CONTROL_MISS_FLOW=flow_id" is used receive the missed
packets from flow with flow ID specified.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: modify flow API QoS setup to follow FS setup

In HW/MC logical, QoS setup should follow FS setup.
In addition, Skip QoS setup if MAX TC number of DPNI is set 1.

Signed-off-by: Jun Yang <j

net/dpaa2: modify flow API QoS setup to follow FS setup

In HW/MC logical, QoS setup should follow FS setup.
In addition, Skip QoS setup if MAX TC number of DPNI is set 1.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: add flow data sanity check

Check flow attributions and actions before creating flow.
Otherwise, the QoS table and FS table need to re-build
if checking fails.

Signed-off-by: Jun Yang <ju

net/dpaa2: add flow data sanity check

Check flow attributions and actions before creating flow.
Otherwise, the QoS table and FS table need to re-build
if checking fails.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: support index of queue action for flow

Make more sense to use RXQ index for queue distribution

instead of flow ID.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <h

net/dpaa2: support index of queue action for flow

Make more sense to use RXQ index for queue distribution

instead of flow ID.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: differentiate IPv4/IPv6 in IP flow setup

Discriminate between IPv4 and IPv6 in generic IP flow setup.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <hemant.agrawal@

net/dpaa2: differentiate IPv4/IPv6 in IP flow setup

Discriminate between IPv4 and IPv6 in generic IP flow setup.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: add logging of flow extracts and rules

This patch add support for logging the flow rules.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

net/dpaa2: define size of table entry

If entry size is not bigger than 27, MC alloc one TCAM entry,
otherwise, alloc 2 TCAM entries.
Extracts size by HW must be not bigger than TCAM entry size(27 or

net/dpaa2: define size of table entry

If entry size is not bigger than 27, MC alloc one TCAM entry,
otherwise, alloc 2 TCAM entries.
Extracts size by HW must be not bigger than TCAM entry size(27 or 54).
So define the flow entry size as 54.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: support QoS or FS table entry indexing

Calculate QoS/FS entry index by group and priority of flow.

1)The less index of entry, the higher priority of flow.
2)Verify if the flow with same

net/dpaa2: support QoS or FS table entry indexing

Calculate QoS/FS entry index by group and priority of flow.

1)The less index of entry, the higher priority of flow.
2)Verify if the flow with same group and priority has been added before
creating flow.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: free flow rule memory

Free rule memory when the flow is destroyed.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

net/dpaa2: add sanity check for flow extracts

Define extracts support for each protocol and check the fields of each
pattern before building extracts of QoS/FS table.

Signed-off-by: Jun Yang <jun.y

net/dpaa2: add sanity check for flow extracts

Define extracts support for each protocol and check the fields of each
pattern before building extracts of QoS/FS table.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: support key extracts of flow API

1) Support QoS extracts and TC extracts for multiple TCs.

2) Protocol type of L2 extract is used to parse L3.
Next protocol of L3 extract is used to p

net/dpaa2: support key extracts of flow API

1) Support QoS extracts and TC extracts for multiple TCs.

2) Protocol type of L2 extract is used to parse L3.
Next protocol of L3 extract is used to parse L4.

3) generic IP key extracts instead of IPv4 and IPv6 respectively.

4) Special for IP address extracts:
Put IP(v4/v6) address extract(s)/rule(s) at the end of extracts array
to make rest fields at fixed position.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net/dpaa2: support dynamic flow control

Dynamic flow used instead of layout defined.

The actual key/mask size depends on protocols and(or) fields
of patterns specified.
Also, the key and mask shoul

net/dpaa2: support dynamic flow control

Dynamic flow used instead of layout defined.

The actual key/mask size depends on protocols and(or) fields
of patterns specified.
Also, the key and mask should start from the beginning of IOVA.

Signed-off-by: Jun Yang <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

fix various typos found by Lintian

Cc: [email protected]

Signed-off-by: Luca Boccassi <[email protected]>

net/dpaa2: update MC firmware version

MC firmware is the core component of FSLMC bus and net/DPAA2 devices.

Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supp

net/dpaa2: update MC firmware version

MC firmware is the core component of FSLMC bus and net/DPAA2 devices.

Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.

Signed-off-by: Sachin Saxena <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net/dpaa2: fix loop increment

Identified by LGTM, the loop was incorrectly incrementing a different
variable and conditional on another.

Fixes: fe2b986ac662 ("net/dpaa2: support generic flow")

Sug

net/dpaa2: fix loop increment

Identified by LGTM, the loop was incorrectly incrementing a different
variable and conditional on another.

Fixes: fe2b986ac662 ("net/dpaa2: support generic flow")

Suggested-by: Ferruh Yigit <[email protected]>
Signed-off-by: Shreyansh Jain <[email protected]>

show more ...

ethdev: deprecate legacy filter API

As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as fil

ethdev: deprecate legacy filter API

As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".

After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.

The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.

Signed-off-by: Thomas Monjalon <[email protected]>
Acked-by: Shahaf Shuler <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Jerin Jacob <[email protected]>
Acked-by: Stephen Hemminger <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Acked-by: Adrien Mazarguil <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>

show more ...

net/dpaa2: support flow table flush

Signed-off-by: Hemant Agrawal <[email protected]>

net/dpaa2: support generic flow

Signed-off-by: Sunil Kumar Kori <[email protected]>
Signed-off-by: Hemant Agrawal <[email protected]>