test/crypto-perf: extend asymmetric crypto throughput test

Extended support for asymmetric crypto perf throughput test.
Added support for new modulus lengths.
Added new parameter --modex-len.
Suppor

test/crypto-perf: extend asymmetric crypto throughput test

Extended support for asymmetric crypto perf throughput test.
Added support for new modulus lengths.
Added new parameter --modex-len.
Supported lengths are 60, 128, 255, 448. Default length is 128.

Signed-off-by: Kiran Kumar K <[email protected]>
Acked-by: Akhil Goyal <[email protected]>

show more ...

app/eventdev: add crypto producer mode

In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventde

app/eventdev: add crypto producer mode

In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.

Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.

This mode can be used to measure the performance of crypto adapter.

Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2

Signed-off-by: Shijith Thotton <[email protected]>
Acked-by: Akhil Goyal <[email protected]>
Acked-by: Abhinandan Gujjar <[email protected]>

show more ...

drivers: remove octeontx2 drivers

As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with dri

drivers: remove octeontx2 drivers

As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.

This patch does the following

- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.

Signed-off-by: Jerin Jacob <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>
Acked-by: Akhil Goyal <[email protected]>
Acked-by: Ruifeng Wang <[email protected]>

show more ...

fix PMD wording

Removing the use of driver following PMD as its unnecessary.

Cc: [email protected]

Signed-off-by: Sean Morrissey <[email protected]>
Signed-off-by: Conor Fogarty <conor.fogart

fix PMD wording

Removing the use of driver following PMD as its unnecessary.

Cc: [email protected]

Signed-off-by: Sean Morrissey <[email protected]>
Signed-off-by: Conor Fogarty <[email protected]>
Acked-by: John McNamara <[email protected]>
Reviewed-by: Conor Walsh <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

doc: fix indentation in flow-perf guide

The --meter section used wrong indentation previously.

Fixes: 6a2cf58a045f ("app/flow-perf: support meter action")
Cc: [email protected]

Signed-off-by: Rongwe

doc: fix indentation in flow-perf guide

The --meter section used wrong indentation previously.

Fixes: 6a2cf58a045f ("app/flow-perf: support meter action")
Cc: [email protected]

Signed-off-by: Rongwei Liu <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>

show more ...

app/flow-perf: add packet metering mode

The flow perf application uses the srtcm_rfc2697 as meter profile
while doing the meter testing.

This patch adds new configuration parameter '--packet-mode'

app/flow-perf: add packet metering mode

The flow perf application uses the srtcm_rfc2697 as meter profile
while doing the meter testing.

This patch adds new configuration parameter '--packet-mode' to
generate the meter flows with packet cir instead of byte cir.

Signed-off-by: Rongwei Liu <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>

show more ...

app/flow-perf: support dynamic values for meter profile

Change meter-cir option to meter-profile to cover user input for CIR,
CBS & EBS values.

The usage is as below:
--meter-profile=N1,N2,N3 defau

app/flow-perf: support dynamic values for meter profile

Change meter-cir option to meter-profile to cover user input for CIR,
CBS & EBS values.

The usage is as below:
--meter-profile=N1,N2,N3 default value is 1250000 156250 0.

Signed-off-by: Rongwei Liu <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>

show more ...

app/flow-perf: support meter policy API

Add option "policy-mtr" to indicate if meter creation will include policy
or not. Meter creation will keep unchanged without it.

With "policy-mtr", the polic

app/flow-perf: support meter policy API

Add option "policy-mtr" to indicate if meter creation will include policy
or not. Meter creation will keep unchanged without it.

With "policy-mtr", the policy is introduced. API create_meter_policy
is to create a policy. API create_meter_rule will use it to create
a meter. The value of it is used to specify meter policy actions.

Signed-off-by: Haifei Luo <[email protected]>
Signed-off-by: Jiawei Wang <[email protected]>
Signed-off-by: Rongwei Liu <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>

show more ...

app/flow-perf: add random priority option

Added support to create flows with priority attribute set
randomly between 0 and a user supplied maximum value. This
is useful to measure performance on NIC

app/flow-perf: add random priority option

Added support to create flows with priority attribute set
randomly between 0 and a user supplied maximum value. This
is useful to measure performance on NICs which may have to
rearrange flows to honor flow priority.

Removed the lower limit of 100000 flows per batch.

Signed-off-by: Satheesh Paul <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>

show more ...