app/testpmd: add async indirect actions operations

Add testpmd support for the rte_flow_async_action_handle API.
Provide the command line interface for operations dequeue.
Usage example:
flow queu

app/testpmd: add async indirect actions operations

Add testpmd support for the rte_flow_async_action_handle API.
Provide the command line interface for operations dequeue.
Usage example:
flow queue 0 indirect_action 0 create action_id 9
ingress postpone yes action rss / end
flow queue 0 indirect_action 0 update action_id 9
action queue index 0 / end
flow queue 0 indirect_action 0 destroy action_id 9

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add flow queue pull operation

Add testpmd support for the rte_flow_pull API.
Provide the command line interface for pulling operations results.
Usage example: flow pull 0 queue 0

Signe

app/testpmd: add flow queue pull operation

Add testpmd support for the rte_flow_pull API.
Provide the command line interface for pulling operations results.
Usage example: flow pull 0 queue 0

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add flow queue push operation

Add testpmd support for the rte_flow_push API.
Provide the command line interface for pushing operations.
Usage example: flow queue 0 push 0

Signed-off-by

app/testpmd: add flow queue push operation

Add testpmd support for the rte_flow_push API.
Provide the command line interface for pushing operations.
Usage example: flow queue 0 push 0

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add async flow create/destroy operations

Add testpmd support for the rte_flow_q_create/rte_flow_q_destroy API.
Provide the command line interface for enqueueing flow
creation/destructio

app/testpmd: add async flow create/destroy operations

Add testpmd support for the rte_flow_q_create/rte_flow_q_destroy API.
Provide the command line interface for enqueueing flow
creation/destruction operations. Usage example:
testpmd> flow queue 0 create 0 postpone no
template_table 6 pattern_template 0 actions_template 0
pattern eth dst is 00:16:3e:31:15:c3 / end actions drop / end
testpmd> flow queue 0 destroy 0 postpone yes rule 0

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add flow table management

Add testpmd support for the rte_flow_table API.
Provide the command line interface for the flow
table creation/destruction. Usage example:
testpmd> flow temp

app/testpmd: add flow table management

Add testpmd support for the rte_flow_table API.
Provide the command line interface for the flow
table creation/destruction. Usage example:
testpmd> flow template_table 0 create table_id 6
group 9 priority 4 ingress mode 1
rules_number 64 pattern_template 2 actions_template 4
testpmd> flow template_table 0 destroy table 6

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add flow template management

Add testpmd support for the rte_flow_pattern_template and
rte_flow_actions_template APIs. Provide the command line interface
for the template creation/destr

app/testpmd: add flow template management

Add testpmd support for the rte_flow_pattern_template and
rte_flow_actions_template APIs. Provide the command line interface
for the template creation/destruction. Usage example:
testpmd> flow pattern_template 0 create pattern_template_id 2
template eth dst is 00:16:3e:31:15:c3 / end
testpmd> flow actions_template 0 create actions_template_id 4
template drop / end mask drop / end
testpmd> flow actions_template 0 destroy actions_template 4
testpmd> flow pattern_template 0 destroy pattern_template 2

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add flow engine configuration

Add testpmd support for the rte_flow_configure API.
Provide the command line interface for the Flow management.
Usage example: flow configure 0 queues_numb

app/testpmd: add flow engine configuration

Add testpmd support for the rte_flow_configure API.
Provide the command line interface for the Flow management.
Usage example: flow configure 0 queues_number 8 queues_size 256

Implement rte_flow_info_get API to get available resources:
Usage example: flow info 0

Signed-off-by: Alexander Kozyrev <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: support GRE option flow item

Add gre_option command for matching optional fields
(checksum/key/sequence) in GRE header. The item must follow gre item,
and the item does not change the f

app/testpmd: support GRE option flow item

Add gre_option command for matching optional fields
(checksum/key/sequence) in GRE header. The item must follow gre item,
and the item does not change the flags in gre item, the application
should set the flags in gre item correspondingly.
Application can still use gre_key item 'gre_key value is xx' for key
matching, the effect is the same with using 'gre_option key is xx'.

The examples for gre_option are as follows:

To match on checksum field with value 0x11:
testpmd> ... pattern / eth / gre c_bit is 1 / gre_option checksum is
0x11 / end ..

To match on checksum field with value 0x11 and any value of key:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 1 / gre_option
checksum is 0x11 / end ..

To match on checksum field with value 0x11 and no key field in packet:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 0 / gre_option
checksum is 0x11 / end ..

The invalid patterns for gre_option are as follows:

testpmd> ... pattern / eth / gre / gre_option checksum is 0x11 / end ..
(c_bit in gre item not present)
testpmd> ... pattern / eth / gre c_bit is 0 / gre_option checksum is 0x11 /
end .. (c_bit is unset for gre item, but checksum is
specified by gre_option item)

Signed-off-by: Sean Zhang <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

app/testpmd: add 6 types of L2TPv2 message

This patch adds L2TPv2 control message and 5 types of data message
support for testpmd.

The added L2TPv2 message types are listed below:
1. L2TPv2 control

app/testpmd: add 6 types of L2TPv2 message

This patch adds L2TPv2 control message and 5 types of data message
support for testpmd.

The added L2TPv2 message types are listed below:
1. L2TPv2 control
2. L2TPv2
3. L2TPv2 + length option
4. L2TPv2 + sequence option
5. L2TPv2 + offset option
6. L2TPv2 + length option + sequence option

Signed-off-by: Jie Wang <[email protected]>
Acked-by: Ori Kam <[email protected]>

show more ...

ethdev: add L2TPv2 RSS offload type

This patch defines new RSS offload type for L2TPv2, which
is required when users want to distribute packets based on
the L2TPv2 session ID field.

Signed-off-by:

ethdev: add L2TPv2 RSS offload type

This patch defines new RSS offload type for L2TPv2, which
is required when users want to distribute packets based on
the L2TPv2 session ID field.

Signed-off-by: Jie Wang <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

app/testpmd: add queue based priority flow control command

Patch adds command line options to configure queue based
priority flow control.

- Syntax command is given as below:

set pfc_queue_ctrl <p

app/testpmd: add queue based priority flow control command

Patch adds command line options to configure queue based
priority flow control.

- Syntax command is given as below:

set pfc_queue_ctrl <port_id> rx <on|off> <tx_qid> <tx_tc> \
tx <on|off> <rx_qid> <rx_tc> <pause_time>

- Example command to configure queue based priority flow control
on rx and tx side for port 0, Rx queue 0, Tx queue 0 with pause
time 2047

testpmd> set pfc_queue_ctrl 0 rx on 0 0 tx on 0 0 2047

Signed-off-by: Sunil Kumar Kori <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

app/testpmd: update raw flow to take hex input

This patch enables method to provide key and mask for raw rules
to be provided as hexadecimal values. There is new parameter
pattern_mask added to supp

app/testpmd: update raw flow to take hex input

This patch enables method to provide key and mask for raw rules
to be provided as hexadecimal values. There is new parameter
pattern_mask added to support this.

Signed-off-by: Nipun Gupta <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>

show more ...

fix spelling in comments and strings

The tool comes from https://github.com/jsoref

Signed-off-by: Josh Soref <[email protected]>
Signed-off-by: Thomas Monjalon <[email protected]>

app/testpmd: fix flow transfer proxy port handling

The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As t

app/testpmd: fix flow transfer proxy port handling

The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As testpmd is a debug tool, it must not do such implicit port handling.
Instead, the new API should be called only when the user requests that.

Revoke the existing code. Implement an explicit command-line primitive
to let the user find the proxy port themselves. Provide relevant hints.

Fixes: 1179f05cc9a0 ("ethdev: query proxy port to manage transfer flows")

Signed-off-by: Ivan Malov <[email protected]>
Reviewed-by: Andrew Rybchenko <[email protected]>
Acked-by: Ori Kam <[email protected]>
Acked-by: Viacheslav Ovsiienko <[email protected]>

show more ...