test: avoid hang if queues are full and Tx fails

Current pmd_perf_autotest() in continuous mode tries
to enqueue MAX_TRAFFIC_BURST completely before starting
the test. Some drivers cannot accept com

test: avoid hang if queues are full and Tx fails

Current pmd_perf_autotest() in continuous mode tries
to enqueue MAX_TRAFFIC_BURST completely before starting
the test. Some drivers cannot accept complete
MAX_TRAFFIC_BURST even though rx+tx desc count can fit it.
This patch changes behaviour to stop enqueuing after few
retries.

Fixes: 002ade70e933 ("app/test: measure cycles per packet in Rx/Tx")
Cc: [email protected]

Signed-off-by: Rakesh Kudurumalla <[email protected]>

show more ...

test: remove POSIX-specific code

- Replace POSIX-specific code with DPDK equivalents or
conditionally disable it on Windows
- Use NUL on Windows as /dev/null for Unix
- Exclude tests not supported

test: remove POSIX-specific code

- Replace POSIX-specific code with DPDK equivalents or
conditionally disable it on Windows
- Use NUL on Windows as /dev/null for Unix
- Exclude tests not supported on Windows yet
* multi-process
* PMD performance statistics display on signal

Signed-off-by: Jie Zhou <[email protected]>
Signed-off-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>

show more ...

test/pmd_perf: use compiler atomic builtins for polling sync

Convert rte_atomic usages to compiler atomic built-ins
for polling sync in pmd_perf test cases.

Signed-off-by: Joyce Kong <joyce.kong@ar

test/pmd_perf: use compiler atomic builtins for polling sync

Convert rte_atomic usages to compiler atomic built-ins
for polling sync in pmd_perf test cases.

Signed-off-by: Joyce Kong <[email protected]>
Reviewed-by: Ruifeng Wang <[email protected]>

show more ...

fix spelling in comments and doxygen

Fix spelling errors in comments including doxygen found using codespell.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Konstantin Anan

fix spelling in comments and doxygen

Fix spelling errors in comments including doxygen found using codespell.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Vladimir Medvedkin <[email protected]>
Reviewed-by: Honnappa Nagarahalli <[email protected]>
Acked-by: Ray Kinsella <[email protected]>
Acked-by: Cristian Dumitrescu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>

show more ...

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to

ethdev: add namespace

Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.

All internal components switched to using new names.

Syntax fixed on lines that this patch touches.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Jerin Jacob <[email protected]>
Acked-by: Wisam Jaddo <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Chenbo Xia <[email protected]>
Acked-by: Hemant Agrawal <[email protected]>
Acked-by: Somnath Kotur <[email protected]>

show more ...

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_p

ethdev: fix max Rx packet length

There is a confusion on setting max Rx packet length, this patch aims to
clarify it.

'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.

Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.

These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.

Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.

As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.

For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.

When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.

Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.

Signed-off-by: Ferruh Yigit <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>
Acked-by: Somnath Kotur <[email protected]>
Acked-by: Huisong Li <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>
Acked-by: Konstantin Ananyev <[email protected]>
Acked-by: Rosen Xu <[email protected]>
Acked-by: Hyong Youb Kim <[email protected]>

show more ...

test: fix buffer overflow in Tx burst

The Tx buffer may overflow when there is more than one port.

Fixes: 002ade70e933 ("app/test: measure cycles per packet in Rx/Tx")
Cc: [email protected]

Signed-o

test: fix buffer overflow in Tx burst

The Tx buffer may overflow when there is more than one port.

Fixes: 002ade70e933 ("app/test: measure cycles per packet in Rx/Tx")
Cc: [email protected]

Signed-off-by: Alvin Zhang <[email protected]>
Acked-by: Jeff Guo <[email protected]>
Tested-by: Wei Ling <[email protected]>

show more ...

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

T

eal: rename lcore master and slave

Replace master lcore with main lcore and
replace slave lcore with worker lcore.

Keep the old functions and macros but mark them as deprecated
for this release.

The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.

Signed-off-by: Stephen Hemminger <[email protected]>
Acked-by: Anatoly Burakov <[email protected]>

show more ...

test: check stop call status

rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across test/event
according to new return type.

Signed-off-by:

test: check stop call status

rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across test/event
according to new return type.

Signed-off-by: Ivan Ilchenko <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

app: use new link status print format

Add usage of rte_eth_link_to_str function to applications and docs.

Signed-off-by: Ivan Dyukov <[email protected]>
Reviewed-by: Ferruh Yigit <ferruh.yigit@i

app: use new link status print format

Add usage of rte_eth_link_to_str function to applications and docs.

Signed-off-by: Ivan Dyukov <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

app: remove extra new line after link duplex

This is testpmd part of new line cleanup.

Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Fixes: ce8d561418 ("app/testpmd: add port c

app: remove extra new line after link duplex

This is testpmd part of new line cleanup.

Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: [email protected]

Signed-off-by: Ivan Dyukov <[email protected]>
Acked-by: Andrew Rybchenko <[email protected]>

show more ...

app: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: I

app: check status of getting MAC address

The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.

Signed-off-by: Igor Romanov <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

app: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new retur

app: check status of getting link info

The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.

Signed-off-by: Igor Romanov <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

app: check code of promiscuous mode switch

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across

app: check code of promiscuous mode switch

rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.

Signed-off-by: Ivan Ilchenko <[email protected]>
Signed-off-by: Andrew Rybchenko <[email protected]>

show more ...

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git gr

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <[email protected]>
Reviewed-by: Olivier Matz <[email protected]>

show more ...

net: add rte prefix to UDP structure

Add 'rte_' prefix to structures:
- rename struct udp_hdr as struct rte_udp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemmin

net: add rte prefix to UDP structure

Add 'rte_' prefix to structures:
- rename struct udp_hdr as struct rte_udp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <o

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename

net: add rte prefix to ether functions

Add 'rte_' prefix to functions:
- rename is_same_ether_addr() as rte_is_same_ether_addr().
- rename is_zero_ether_addr() as rte_is_zero_ether_addr().
- rename is_unicast_ether_addr() as rte_is_unicast_ether_addr().
- rename is_multicast_ether_addr() as rte_is_multicast_ether_addr().
- rename is_broadcast_ether_addr() as rte_is_broadcast_ether_addr().
- rename is_universal_ether_addr() as rte_is_universal_ether_addr().
- rename is_local_admin_ether_addr() as rte_is_local_admin_ether_addr().
- rename is_valid_assigned_ether_addr() as rte_is_valid_assigned_ether_addr().
- rename eth_random_addr() as rte_eth_random_addr().
- rename ether_addr_copy() as rte_ether_addr_copy().
- rename ether_format_addr() as rte_ether_format_addr().

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we ca

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.

This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.

For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.

Signed-off-by: Bruce Richardson <[email protected]>

show more ...

app/test: rework command registration

The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the re

app/test: rework command registration

The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the register macro.
This rework generate the structure inside the register macro.

Signed-off-by: Thomas Monjalon <[email protected]>
Reviewed-by: Jan Viktorin <[email protected]>

show more ...

examples: remove useless check of port count

The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.

Signed-off-by: Mauricio Vasquez B

examples: remove useless check of port count

The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.

Signed-off-by: Mauricio Vasquez B <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>

show more ...

ethdev: use constants for link state

Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.

Signed-off-by: Marc Sune <[email protected]>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6

ethdev: use constants for link state

Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.

Signed-off-by: Marc Sune <[email protected]>
Signed-off-by: Thomas Monjalon <[email protected]>

show more ...

app/test: fix crash in performance test

Fix crash in pmd_perf_test autotest (div by 0) when no packets received
Also fixes the fact that the test passes even if exec_burst fails

To repeat the issue

app/test: fix crash in performance test

Fix crash in pmd_perf_test autotest (div by 0) when no packets received
Also fixes the fact that the test passes even if exec_burst fails

To repeat the issue:
The system must be incorrectly set up so that all packets will be lost,
i.e. no loopback cable, etc. This is an edge case, but still the test
should not crash or pass when failing.
run the test app
RTE>> set_rxtx_sc poll_before_xmit
RTE>> pmd_perf_autotest
--snip--
> Generate 4096 packets @socket 1
> start to receive total expect 4096
> 4096 packets lost, IDLE 10000 times
> Floating point exception (core dumped)

Signed-off-by: David Hunt <[email protected]>

show more ...