test: skip unsupported tests on Windows

Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue

test: skip unsupported tests on Windows

Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue still under investigation
* test_func_reentrancy:
Windows EAL has no protection against repeated calls.
* test_lcores:
Execution enters an infinite loops, requires investigation.
* test_rcu_qsbr_perf:
Execution hangs on Windows, requires investigation.

Signed-off-by: Jie Zhou <[email protected]>
Signed-off-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>

show more ...

net: introduce IPv4 IHL and version fields

RTE IPv4 header definition combines the `version' and `ihl' fields
into a single structure member.
This patch introduces dedicated structure members for b

net: introduce IPv4 IHL and version fields

RTE IPv4 header definition combines the `version' and `ihl' fields
into a single structure member.
This patch introduces dedicated structure members for both `version'
and `ihl' IPv4 fields. Separated header fields definitions allow to
create simplified code to match on the IHL value in a flow rule.
The original `version_ihl' structure member is kept for backward
compatibility.

Signed-off-by: Gregory Etelson <[email protected]>
Acked-by: Olivier Matz <[email protected]>
Acked-by: Ray Kinsella <[email protected]>
Acked-by: Ajit Khaparde <[email protected]>

show more ...

test: check flow classifier creation

'cls->cls' will be NULL if flow classifier create has failed,
then segmentation fault will occur if the variable is used.

This patch fixed it.

Fixes: 9c9befea4

test: check flow classifier creation

'cls->cls' will be NULL if flow classifier create has failed,
then segmentation fault will occur if the variable is used.

This patch fixed it.

Fixes: 9c9befea4f57 ("test: add flow classify unit tests")
Cc: [email protected]

Signed-off-by: Min Hu (Connor) <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>

show more ...

test/flow_classify: enable multi-sockets system

This commit fixes failures of the flow_classify_autotest when
ran on dual-socket servers, as the sample application does not
support more than a singl

test/flow_classify: enable multi-sockets system

This commit fixes failures of the flow_classify_autotest when
ran on dual-socket servers, as the sample application does not
support more than a single socket. Increasing the NB_SOCKETS
value allows the test to run successfully.

Fixes: 9c9befea4f57 ("test: add flow classify unit tests")
Cc: [email protected]

Signed-off-by: Harry van Haaren <[email protected]>
Tested-by: Ferruh Yigit <[email protected]>
Tested-by: Bernard Iremonger <[email protected]>
Acked-by: Bernard Iremonger <[email protected]>

show more ...

test/flow_classify: fix undefined behavior

The unit test for the flow classify introduced undefined behavior by using
a corrupted list. Remove these tests as the invalid data is impossible to
detec

test/flow_classify: fix undefined behavior

The unit test for the flow classify introduced undefined behavior by using
a corrupted list. Remove these tests as the invalid data is impossible to
detect with the current API.

Fixes: 9c9befea4f57 ("test: add flow classify unit tests")
Cc: [email protected]

Signed-off-by: Aaron Conole <[email protected]>

show more ...

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git gr

net: replace IPv4/v6 constants with uppercase name

Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.

old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"

Signed-off-by: David Marchand <[email protected]>
Reviewed-by: Olivier Matz <[email protected]>

show more ...

net: add rte prefix to UDP structure

Add 'rte_' prefix to structures:
- rename struct udp_hdr as struct rte_udp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemmin

net: add rte prefix to UDP structure

Add 'rte_' prefix to structures:
- rename struct udp_hdr as struct rte_udp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to TCP structure

Add 'rte_' prefix to structures:
- rename struct tcp_hdr as struct rte_tcp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemmin

net: add rte prefix to TCP structure

Add 'rte_' prefix to structures:
- rename struct tcp_hdr as struct rte_tcp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to SCTP structure

Add 'rte_' prefix to structures:
- rename struct sctp_hdr as struct rte_sctp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hem

net: add rte prefix to SCTP structure

Add 'rte_' prefix to structures:
- rename struct sctp_hdr as struct rte_sctp_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
-

net: add rte prefix to IP defines

Add 'RTE_' prefix to defines:
- rename IPv4( as RTE_IPv4(.
- rename IPV4_MAX_PKT_LEN as RTE_IPV4_MAX_PKT_LEN.
- rename IPV4_HDR_IHL_MASK as RTE_IPV4_HDR_IHL_MASK.
- rename IPV4_IHL_MULTIPLIER as RTE_IPV4_IHL_MULTIPLIER.
- rename IPV4_HDR_DF_SHIFT as RTE_IPV4_HDR_DF_SHIFT.
- rename IPV4_HDR_MF_SHIFT as RTE_IPV4_HDR_MF_SHIFT.
- rename IPV4_HDR_FO_SHIFT as RTE_IPV4_HDR_FO_SHIFT.
- rename IPV4_HDR_DF_FLAG as RTE_IPV4_HDR_DF_FLAG.
- rename IPV4_HDR_MF_FLAG as RTE_IPV4_HDR_MF_FLAG.
- rename IPV4_HDR_OFFSET_MASK as RTE_IPV4_HDR_OFFSET_MASK.
- rename IPV4_HDR_OFFSET_UNITS as RTE_IPV4_HDR_OFFSET_UNITS.
- rename IPV4_ANY as RTE_IPV4_ANY.
- rename IPV4_LOOPBACK as RTE_IPV4_LOOPBACK.
- rename IPV4_BROADCAST as RTE_IPV4_BROADCAST.
- rename IPV4_ALLHOSTS_GROUP as RTE_IPV4_ALLHOSTS_GROUP.
- rename IPV4_ALLRTRS_GROUP as RTE_IPV4_ALLRTRS_GROUP.
- rename IPV4_MAX_LOCAL_GROUP as RTE_IPV4_MAX_LOCAL_GROUP.
- rename IPV4_MIN_MCAST as RTE_IPV4_MIN_MCAST.
- rename IPV4_MAX_MCAST as RTE_IPV4_MAX_MCAST.
- rename IS_IPV4_MCAST as RTE_IS_IPV4_MCAST.
- rename IPV6_HDR_FL_SHIFT as RTE_IPV6_HDR_FL_SHIFT.
- rename IPV6_HDR_TC_SHIFT as RTE_IPV6_HDR_TC_SHIFT.
- rename IPV6_HDR_FL_MASK as RTE_IPV6_HDR_FL_MASK.
- rename IPV6_HDR_TC_MASK as RTE_IPV6_HDR_TC_MASK.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <o

net: add rte prefix to IP structure

Add 'rte_' prefix to structures:
- rename struct ipv4_hdr as struct rte_ipv4_hdr.
- rename struct ipv6_hdr as struct rte_ipv6_hdr.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <[email protected]>
Reviewed-by: Stephen Hemminger <[email protected]>
Reviewed-by: Maxime Coquelin <[email protected]>
Reviewed-by: Ferruh Yigit <[email protected]>

show more ...

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we ca

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.

This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.

For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.

Signed-off-by: Bruce Richardson <[email protected]>

show more ...