test/event: set queue attributes at runtime

Added test cases to test changing of queue QoS attributes priority,
weight and affinity at runtime.

Signed-off-by: Shijith Thotton <[email protected]>

test/event: set queue attributes at runtime

Added test cases to test changing of queue QoS attributes priority,
weight and affinity at runtime.

Signed-off-by: Shijith Thotton <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

test: skip unsupported tests on Windows

Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue

test: skip unsupported tests on Windows

Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue still under investigation
* test_func_reentrancy:
Windows EAL has no protection against repeated calls.
* test_lcores:
Execution enters an infinite loops, requires investigation.
* test_rcu_qsbr_perf:
Execution hangs on Windows, requires investigation.

Signed-off-by: Jie Zhou <[email protected]>
Signed-off-by: Dmitry Kozlyuk <[email protected]>
Acked-by: Tyler Retzlaff <[email protected]>

show more ...

drivers: remove octeontx2 drivers

As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with dri

drivers: remove octeontx2 drivers

As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.

This patch does the following

- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.

Signed-off-by: Jerin Jacob <[email protected]>
Acked-by: Ferruh Yigit <[email protected]>
Acked-by: Akhil Goyal <[email protected]>
Acked-by: Ruifeng Wang <[email protected]>

show more ...

event/cnxk: add SSO selftest and dump

Add selftest to verify sanity of SSO and also add function to
dump internal state of SSO.

Signed-off-by: Pavan Nikhilesh <[email protected]>

event/dlb: remove driver

Remove event/dlb driver from DPDK code base.
Updated release note's removal section to reflect the same.

Also updated doc/guides/rel_notes/release_20_11.rst to fix the
the

event/dlb: remove driver

Remove event/dlb driver from DPDK code base.
Updated release note's removal section to reflect the same.

Also updated doc/guides/rel_notes/release_20_11.rst to fix the
the missing link issue due to removal of doc/guides/eventdevs/dlb.rst

Signed-off-by: Timothy McDaniel <[email protected]>

show more ...

event/dlb: add self-tests

Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel

event/dlb: add self-tests

Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...

Signed-off-by: Timothy McDaniel <[email protected]>
Reviewed-by: Gage Eads <[email protected]>

show more ...

event/dlb2: add self-tests

Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@inte

event/dlb2: add self-tests

Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...

Signed-off-by: Timothy McDaniel <[email protected]>
Reviewed-by: Gage Eads <[email protected]>

show more ...

eventdev: express DLB/DLB2 PMD constraints

This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch,

eventdev: express DLB/DLB2 PMD constraints

This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.

The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.

Following is a detailed description of the changes that have been made.

1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.

struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/

uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}

2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.

/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}

3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.

* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)

/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/

#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/

struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}

This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.

Signed-off-by: Timothy McDaniel <[email protected]>
Acked-by: Harry van Haaren <[email protected]>
Acked-by: Pavan Nikhilesh <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

test/event: fix OCTEON TX2 event device name

Fix octeontx2 event device name used in eventdevice test.

Fixes: 62561532ac4c ("event/octeontx2: add SSO selftest")
Cc: [email protected]

Signed-off-by:

test/event: fix OCTEON TX2 event device name

Fix octeontx2 event device name used in eventdevice test.

Fixes: 62561532ac4c ("event/octeontx2: add SSO selftest")
Cc: [email protected]

Signed-off-by: Pavan Nikhilesh <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

test/event: fix unintended vdev creation

Virtual eventdevice should only be created when there is no existing
device with the same name.

Fixes: e0f4a0ed4237 ("test: skip tests when missing requirem

test/event: fix unintended vdev creation

Virtual eventdevice should only be created when there is no existing
device with the same name.

Fixes: e0f4a0ed4237 ("test: skip tests when missing requirements")
Cc: [email protected]

Signed-off-by: Pavan Nikhilesh <[email protected]>
Acked-by: Jerin Jacob <[email protected]>

show more ...

test/event: enable dpaa2 self test

This patch add the support to include dpaa2 event test
from the test framework.

Signed-off-by: Hemant Agrawal <[email protected]>

event/octeontx2: add SSO selftest

Add selftest to verify sanity of SSO.
Can be run by passing devargs to SSO PF as follows:

Example:
--dev "0002:0e:00.0,selftest=1"

Signed-off-by: Pavan Nikhilesh

event/octeontx2: add SSO selftest

Add selftest to verify sanity of SSO.
Can be run by passing devargs to SSO PF as follows:

Example:
--dev "0002:0e:00.0,selftest=1"

Signed-off-by: Pavan Nikhilesh <[email protected]>
Signed-off-by: Jerin Jacob <[email protected]>

show more ...

test: skip tests when missing requirements

Let's mark as skipped the tests when they are missing some requirements
like a number of used cores or specific hardware availability, like
compress, crypt

test: skip tests when missing requirements

Let's mark as skipped the tests when they are missing some requirements
like a number of used cores or specific hardware availability, like
compress, crypto or eventdev devices.

Signed-off-by: David Marchand <[email protected]>

show more ...

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we ca

test: move to app directory

Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.

This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.

For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.

Signed-off-by: Bruce Richardson <[email protected]>

show more ...