1 //! Contains the common Wasmtime command line interface (CLI) flags. 2 3 use anyhow::{Context, Result}; 4 use clap::Parser; 5 use serde::Deserialize; 6 use std::{ 7 fmt, fs, 8 path::{Path, PathBuf}, 9 time::Duration, 10 }; 11 use wasmtime::Config; 12 13 pub mod opt; 14 15 #[cfg(feature = "logging")] 16 fn init_file_per_thread_logger(prefix: &'static str) { 17 file_per_thread_logger::initialize(prefix); 18 file_per_thread_logger::allow_uninitialized(); 19 20 // Extending behavior of default spawner: 21 // https://docs.rs/rayon/1.1.0/rayon/struct.ThreadPoolBuilder.html#method.spawn_handler 22 // Source code says DefaultSpawner is implementation detail and 23 // shouldn't be used directly. 24 #[cfg(feature = "parallel-compilation")] 25 rayon::ThreadPoolBuilder::new() 26 .spawn_handler(move |thread| { 27 let mut b = std::thread::Builder::new(); 28 if let Some(name) = thread.name() { 29 b = b.name(name.to_owned()); 30 } 31 if let Some(stack_size) = thread.stack_size() { 32 b = b.stack_size(stack_size); 33 } 34 b.spawn(move || { 35 file_per_thread_logger::initialize(prefix); 36 thread.run() 37 })?; 38 Ok(()) 39 }) 40 .build_global() 41 .unwrap(); 42 } 43 44 wasmtime_option_group! { 45 #[derive(PartialEq, Clone, Deserialize)] 46 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 47 pub struct OptimizeOptions { 48 /// Optimization level of generated code (0-2, s; default: 2) 49 #[serde(default)] 50 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 51 pub opt_level: Option<wasmtime::OptLevel>, 52 53 /// Register allocator algorithm choice. 54 #[serde(default)] 55 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 56 pub regalloc_algorithm: Option<wasmtime::RegallocAlgorithm>, 57 58 /// Do not allow Wasm linear memories to move in the host process's 59 /// address space. 60 pub memory_may_move: Option<bool>, 61 62 /// Initial virtual memory allocation size for memories. 63 pub memory_reservation: Option<u64>, 64 65 /// Bytes to reserve at the end of linear memory for growth into. 66 pub memory_reservation_for_growth: Option<u64>, 67 68 /// Size, in bytes, of guard pages for linear memories. 69 pub memory_guard_size: Option<u64>, 70 71 /// Indicates whether an unmapped region of memory is placed before all 72 /// linear memories. 73 pub guard_before_linear_memory: Option<bool>, 74 75 /// Whether to initialize tables lazily, so that instantiation is 76 /// fast but indirect calls are a little slower. If no, tables are 77 /// initialized eagerly from any active element segments that apply to 78 /// them during instantiation. (default: yes) 79 pub table_lazy_init: Option<bool>, 80 81 /// Enable the pooling allocator, in place of the on-demand allocator. 82 pub pooling_allocator: Option<bool>, 83 84 /// The number of decommits to do per batch. A batch size of 1 85 /// effectively disables decommit batching. (default: 1) 86 pub pooling_decommit_batch_size: Option<usize>, 87 88 /// How many bytes to keep resident between instantiations for the 89 /// pooling allocator in linear memories. 90 pub pooling_memory_keep_resident: Option<usize>, 91 92 /// How many bytes to keep resident between instantiations for the 93 /// pooling allocator in tables. 94 pub pooling_table_keep_resident: Option<usize>, 95 96 /// Enable memory protection keys for the pooling allocator; this can 97 /// optimize the size of memory slots. 98 #[serde(default)] 99 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 100 pub pooling_memory_protection_keys: Option<wasmtime::Enabled>, 101 102 /// Sets an upper limit on how many memory protection keys (MPK) Wasmtime 103 /// will use. (default: 16) 104 pub pooling_max_memory_protection_keys: Option<usize>, 105 106 /// Configure attempting to initialize linear memory via a 107 /// copy-on-write mapping (default: yes) 108 pub memory_init_cow: Option<bool>, 109 110 /// Threshold below which CoW images are guaranteed to be used and be 111 /// dense. 112 pub memory_guaranteed_dense_image_size: Option<u64>, 113 114 /// The maximum number of WebAssembly instances which can be created 115 /// with the pooling allocator. 116 pub pooling_total_core_instances: Option<u32>, 117 118 /// The maximum number of WebAssembly components which can be created 119 /// with the pooling allocator. 120 pub pooling_total_component_instances: Option<u32>, 121 122 /// The maximum number of WebAssembly memories which can be created with 123 /// the pooling allocator. 124 pub pooling_total_memories: Option<u32>, 125 126 /// The maximum number of WebAssembly tables which can be created with 127 /// the pooling allocator. 128 pub pooling_total_tables: Option<u32>, 129 130 /// The maximum number of WebAssembly stacks which can be created with 131 /// the pooling allocator. 132 pub pooling_total_stacks: Option<u32>, 133 134 /// The maximum runtime size of each linear memory in the pooling 135 /// allocator, in bytes. 136 pub pooling_max_memory_size: Option<usize>, 137 138 /// The maximum table elements for any table defined in a module when 139 /// using the pooling allocator. 140 pub pooling_table_elements: Option<usize>, 141 142 /// The maximum size, in bytes, allocated for a core instance's metadata 143 /// when using the pooling allocator. 144 pub pooling_max_core_instance_size: Option<usize>, 145 146 /// Configures the maximum number of "unused warm slots" to retain in the 147 /// pooling allocator. (default: 100) 148 pub pooling_max_unused_warm_slots: Option<u32>, 149 150 /// How much memory, in bytes, to keep resident for async stacks allocated 151 /// with the pooling allocator. (default: 0) 152 pub pooling_async_stack_keep_resident: Option<usize>, 153 154 /// The maximum size, in bytes, allocated for a component instance's 155 /// `VMComponentContext` metadata. (default: 1MiB) 156 pub pooling_max_component_instance_size: Option<usize>, 157 158 /// The maximum number of core instances a single component may contain 159 /// (default is unlimited). 160 pub pooling_max_core_instances_per_component: Option<u32>, 161 162 /// The maximum number of Wasm linear memories that a single component may 163 /// transitively contain (default is unlimited). 164 pub pooling_max_memories_per_component: Option<u32>, 165 166 /// The maximum number of tables that a single component may transitively 167 /// contain (default is unlimited). 168 pub pooling_max_tables_per_component: Option<u32>, 169 170 /// The maximum number of defined tables for a core module. (default: 1) 171 pub pooling_max_tables_per_module: Option<u32>, 172 173 /// The maximum number of defined linear memories for a module. (default: 1) 174 pub pooling_max_memories_per_module: Option<u32>, 175 176 /// The maximum number of concurrent GC heaps supported. (default: 1000) 177 pub pooling_total_gc_heaps: Option<u32>, 178 179 /// Enable or disable the use of host signal handlers for traps. 180 pub signals_based_traps: Option<bool>, 181 182 /// DEPRECATED: Use `-Cmemory-guard-size=N` instead. 183 pub dynamic_memory_guard_size: Option<u64>, 184 185 /// DEPRECATED: Use `-Cmemory-guard-size=N` instead. 186 pub static_memory_guard_size: Option<u64>, 187 188 /// DEPRECATED: Use `-Cmemory-may-move` instead. 189 pub static_memory_forced: Option<bool>, 190 191 /// DEPRECATED: Use `-Cmemory-reservation=N` instead. 192 pub static_memory_maximum_size: Option<u64>, 193 194 /// DEPRECATED: Use `-Cmemory-reservation-for-growth=N` instead. 195 pub dynamic_memory_reserved_for_growth: Option<u64>, 196 197 /// Whether or not `PAGEMAP_SCAN` ioctls are used to reset linear 198 /// memory. 199 #[serde(default)] 200 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 201 pub pooling_pagemap_scan: Option<wasmtime::Enabled>, 202 } 203 204 enum Optimize { 205 ... 206 } 207 } 208 209 wasmtime_option_group! { 210 #[derive(PartialEq, Clone, Deserialize)] 211 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 212 pub struct CodegenOptions { 213 /// Either `cranelift` or `winch`. 214 /// 215 /// Currently only `cranelift` and `winch` are supported, but not all 216 /// builds of Wasmtime have both built in. 217 #[serde(default)] 218 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 219 pub compiler: Option<wasmtime::Strategy>, 220 /// Which garbage collector to use: `drc` or `null`. 221 /// 222 /// `drc` is the deferred reference-counting collector. 223 /// 224 /// `null` is the null garbage collector, which does not collect any 225 /// garbage. 226 /// 227 /// Note that not all builds of Wasmtime will have support for garbage 228 /// collection included. 229 #[serde(default)] 230 #[serde(deserialize_with = "crate::opt::cli_parse_wrapper")] 231 pub collector: Option<wasmtime::Collector>, 232 /// Enable Cranelift's internal debug verifier (expensive) 233 pub cranelift_debug_verifier: Option<bool>, 234 /// Whether or not to enable caching of compiled modules. 235 pub cache: Option<bool>, 236 /// Configuration for compiled module caching. 237 pub cache_config: Option<String>, 238 /// Whether or not to enable parallel compilation of modules. 239 pub parallel_compilation: Option<bool>, 240 /// Whether to enable proof-carrying code (PCC)-based validation. 241 pub pcc: Option<bool>, 242 /// Controls whether native unwind information is present in compiled 243 /// object files. 244 pub native_unwind_info: Option<bool>, 245 246 /// Whether to perform function inlining during compilation. 247 pub inlining: Option<bool>, 248 249 #[prefixed = "cranelift"] 250 #[serde(default)] 251 /// Set a cranelift-specific option. Use `wasmtime settings` to see 252 /// all. 253 pub cranelift: Vec<(String, Option<String>)>, 254 } 255 256 enum Codegen { 257 ... 258 } 259 } 260 261 wasmtime_option_group! { 262 #[derive(PartialEq, Clone, Deserialize)] 263 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 264 pub struct DebugOptions { 265 /// Enable generation of DWARF debug information in compiled code. 266 pub debug_info: Option<bool>, 267 /// Configure whether compiled code can map native addresses to wasm. 268 pub address_map: Option<bool>, 269 /// Configure whether logging is enabled. 270 pub logging: Option<bool>, 271 /// Configure whether logs are emitted to files 272 pub log_to_files: Option<bool>, 273 /// Enable coredump generation to this file after a WebAssembly trap. 274 pub coredump: Option<String>, 275 } 276 277 enum Debug { 278 ... 279 } 280 } 281 282 wasmtime_option_group! { 283 #[derive(PartialEq, Clone, Deserialize)] 284 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 285 pub struct WasmOptions { 286 /// Enable canonicalization of all NaN values. 287 pub nan_canonicalization: Option<bool>, 288 /// Enable execution fuel with N units fuel, trapping after running out 289 /// of fuel. 290 /// 291 /// Most WebAssembly instructions consume 1 unit of fuel. Some 292 /// instructions, such as `nop`, `drop`, `block`, and `loop`, consume 0 293 /// units, as any execution cost associated with them involves other 294 /// instructions which do consume fuel. 295 pub fuel: Option<u64>, 296 /// Yield when a global epoch counter changes, allowing for async 297 /// operation without blocking the executor. 298 pub epoch_interruption: Option<bool>, 299 /// Maximum stack size, in bytes, that wasm is allowed to consume before a 300 /// stack overflow is reported. 301 pub max_wasm_stack: Option<usize>, 302 /// Stack size, in bytes, that will be allocated for async stacks. 303 /// 304 /// Note that this must be larger than `max-wasm-stack` and the 305 /// difference between the two is how much stack the host has to execute 306 /// on. 307 pub async_stack_size: Option<usize>, 308 /// Configures whether or not stacks used for async futures are zeroed 309 /// before (re)use as a defense-in-depth mechanism. (default: false) 310 pub async_stack_zeroing: Option<bool>, 311 /// Allow unknown exports when running commands. 312 pub unknown_exports_allow: Option<bool>, 313 /// Allow the main module to import unknown functions, using an 314 /// implementation that immediately traps, when running commands. 315 pub unknown_imports_trap: Option<bool>, 316 /// Allow the main module to import unknown functions, using an 317 /// implementation that returns default values, when running commands. 318 pub unknown_imports_default: Option<bool>, 319 /// Enables memory error checking. (see wmemcheck.md for more info) 320 pub wmemcheck: Option<bool>, 321 /// Maximum size, in bytes, that a linear memory is allowed to reach. 322 /// 323 /// Growth beyond this limit will cause `memory.grow` instructions in 324 /// WebAssembly modules to return -1 and fail. 325 pub max_memory_size: Option<usize>, 326 /// Maximum size, in table elements, that a table is allowed to reach. 327 pub max_table_elements: Option<usize>, 328 /// Maximum number of WebAssembly instances allowed to be created. 329 pub max_instances: Option<usize>, 330 /// Maximum number of WebAssembly tables allowed to be created. 331 pub max_tables: Option<usize>, 332 /// Maximum number of WebAssembly linear memories allowed to be created. 333 pub max_memories: Option<usize>, 334 /// Force a trap to be raised on `memory.grow` and `table.grow` failure 335 /// instead of returning -1 from these instructions. 336 /// 337 /// This is not necessarily a spec-compliant option to enable but can be 338 /// useful for tracking down a backtrace of what is requesting so much 339 /// memory, for example. 340 pub trap_on_grow_failure: Option<bool>, 341 /// Maximum execution time of wasm code before timing out (1, 2s, 100ms, etc) 342 pub timeout: Option<Duration>, 343 /// Configures support for all WebAssembly proposals implemented. 344 pub all_proposals: Option<bool>, 345 /// Configure support for the bulk memory proposal. 346 pub bulk_memory: Option<bool>, 347 /// Configure support for the multi-memory proposal. 348 pub multi_memory: Option<bool>, 349 /// Configure support for the multi-value proposal. 350 pub multi_value: Option<bool>, 351 /// Configure support for the reference-types proposal. 352 pub reference_types: Option<bool>, 353 /// Configure support for the simd proposal. 354 pub simd: Option<bool>, 355 /// Configure support for the relaxed-simd proposal. 356 pub relaxed_simd: Option<bool>, 357 /// Configure forcing deterministic and host-independent behavior of 358 /// the relaxed-simd instructions. 359 /// 360 /// By default these instructions may have architecture-specific behavior as 361 /// allowed by the specification, but this can be used to force the behavior 362 /// of these instructions to match the deterministic behavior classified in 363 /// the specification. Note that enabling this option may come at a 364 /// performance cost. 365 pub relaxed_simd_deterministic: Option<bool>, 366 /// Configure support for the tail-call proposal. 367 pub tail_call: Option<bool>, 368 /// Configure support for the threads proposal. 369 pub threads: Option<bool>, 370 /// Configure support for the shared-everything-threads proposal. 371 pub shared_everything_threads: Option<bool>, 372 /// Configure support for the memory64 proposal. 373 pub memory64: Option<bool>, 374 /// Configure support for the component-model proposal. 375 pub component_model: Option<bool>, 376 /// Component model support for async lifting/lowering. 377 pub component_model_async: Option<bool>, 378 /// Component model support for async lifting/lowering: this corresponds 379 /// to the �� emoji in the component model specification. 380 pub component_model_async_builtins: Option<bool>, 381 /// Component model support for async lifting/lowering: this corresponds 382 /// to the �� emoji in the component model specification. 383 pub component_model_async_stackful: Option<bool>, 384 /// Component model support for `error-context`: this corresponds 385 /// to the �� emoji in the component model specification. 386 pub component_model_error_context: Option<bool>, 387 /// GC support in the component model: this corresponds to the �� emoji 388 /// in the component model specification. 389 pub component_model_gc: Option<bool>, 390 /// Configure support for the function-references proposal. 391 pub function_references: Option<bool>, 392 /// Configure support for the stack-switching proposal. 393 pub stack_switching: Option<bool>, 394 /// Configure support for the GC proposal. 395 pub gc: Option<bool>, 396 /// Configure support for the custom-page-sizes proposal. 397 pub custom_page_sizes: Option<bool>, 398 /// Configure support for the wide-arithmetic proposal. 399 pub wide_arithmetic: Option<bool>, 400 /// Configure support for the extended-const proposal. 401 pub extended_const: Option<bool>, 402 /// Configure support for the exceptions proposal. 403 pub exceptions: Option<bool>, 404 /// Whether or not any GC infrastructure in Wasmtime is enabled or not. 405 pub gc_support: Option<bool>, 406 } 407 408 enum Wasm { 409 ... 410 } 411 } 412 413 wasmtime_option_group! { 414 #[derive(PartialEq, Clone, Deserialize)] 415 #[serde(rename_all = "kebab-case", deny_unknown_fields)] 416 pub struct WasiOptions { 417 /// Enable support for WASI CLI APIs, including filesystems, sockets, clocks, and random. 418 pub cli: Option<bool>, 419 /// Enable WASI APIs marked as: @unstable(feature = cli-exit-with-code) 420 pub cli_exit_with_code: Option<bool>, 421 /// Deprecated alias for `cli` 422 pub common: Option<bool>, 423 /// Enable support for WASI neural network imports (experimental) 424 pub nn: Option<bool>, 425 /// Enable support for WASI threading imports (experimental). Implies preview2=false. 426 pub threads: Option<bool>, 427 /// Enable support for WASI HTTP imports 428 pub http: Option<bool>, 429 /// Number of distinct write calls to the outgoing body's output-stream 430 /// that the implementation will buffer. 431 /// Default: 1. 432 pub http_outgoing_body_buffer_chunks: Option<usize>, 433 /// Maximum size allowed in a write call to the outgoing body's output-stream. 434 /// Default: 1024 * 1024. 435 pub http_outgoing_body_chunk_size: Option<usize>, 436 /// Enable support for WASI config imports (experimental) 437 pub config: Option<bool>, 438 /// Enable support for WASI key-value imports (experimental) 439 pub keyvalue: Option<bool>, 440 /// Inherit environment variables and file descriptors following the 441 /// systemd listen fd specification (UNIX only) (legacy wasip1 442 /// implementation only) 443 pub listenfd: Option<bool>, 444 /// Grant access to the given TCP listen socket (experimental, legacy 445 /// wasip1 implementation only) 446 #[serde(default)] 447 pub tcplisten: Vec<String>, 448 /// Enable support for WASI TLS (Transport Layer Security) imports (experimental) 449 pub tls: Option<bool>, 450 /// Implement WASI Preview1 using new Preview2 implementation (true, default) or legacy 451 /// implementation (false) 452 pub preview2: Option<bool>, 453 /// Pre-load machine learning graphs (i.e., models) for use by wasi-nn. 454 /// 455 /// Each use of the flag will preload a ML model from the host directory 456 /// using the given model encoding. The model will be mapped to the 457 /// directory name: e.g., `--wasi-nn-graph openvino:/foo/bar` will preload 458 /// an OpenVINO model named `bar`. Note that which model encodings are 459 /// available is dependent on the backends implemented in the 460 /// `wasmtime_wasi_nn` crate. 461 #[serde(skip)] 462 pub nn_graph: Vec<WasiNnGraph>, 463 /// Flag for WASI preview2 to inherit the host's network within the 464 /// guest so it has full access to all addresses/ports/etc. 465 pub inherit_network: Option<bool>, 466 /// Indicates whether `wasi:sockets/ip-name-lookup` is enabled or not. 467 pub allow_ip_name_lookup: Option<bool>, 468 /// Indicates whether `wasi:sockets` TCP support is enabled or not. 469 pub tcp: Option<bool>, 470 /// Indicates whether `wasi:sockets` UDP support is enabled or not. 471 pub udp: Option<bool>, 472 /// Enable WASI APIs marked as: @unstable(feature = network-error-code) 473 pub network_error_code: Option<bool>, 474 /// Allows imports from the `wasi_unstable` core wasm module. 475 pub preview0: Option<bool>, 476 /// Inherit all environment variables from the parent process. 477 /// 478 /// This option can be further overwritten with `--env` flags. 479 pub inherit_env: Option<bool>, 480 /// Pass a wasi config variable to the program. 481 #[serde(skip)] 482 pub config_var: Vec<KeyValuePair>, 483 /// Preset data for the In-Memory provider of WASI key-value API. 484 #[serde(skip)] 485 pub keyvalue_in_memory_data: Vec<KeyValuePair>, 486 /// Enable support for WASIp3 APIs. 487 pub p3: Option<bool>, 488 } 489 490 enum Wasi { 491 ... 492 } 493 } 494 495 #[derive(Debug, Clone, PartialEq)] 496 pub struct WasiNnGraph { 497 pub format: String, 498 pub dir: String, 499 } 500 501 #[derive(Debug, Clone, PartialEq)] 502 pub struct KeyValuePair { 503 pub key: String, 504 pub value: String, 505 } 506 507 /// Common options for commands that translate WebAssembly modules 508 #[derive(Parser, Clone, Deserialize)] 509 #[serde(deny_unknown_fields)] 510 pub struct CommonOptions { 511 // These options groups are used to parse `-O` and such options but aren't 512 // the raw form consumed by the CLI. Instead they're pushed into the `pub` 513 // fields below as part of the `configure` method. 514 // 515 // Ideally clap would support `pub opts: OptimizeOptions` and parse directly 516 // into that but it does not appear to do so for multiple `-O` flags for 517 // now. 518 /// Optimization and tuning related options for wasm performance, `-O help` to 519 /// see all. 520 #[arg(short = 'O', long = "optimize", value_name = "KEY[=VAL[,..]]")] 521 #[serde(skip)] 522 opts_raw: Vec<opt::CommaSeparated<Optimize>>, 523 524 /// Codegen-related configuration options, `-C help` to see all. 525 #[arg(short = 'C', long = "codegen", value_name = "KEY[=VAL[,..]]")] 526 #[serde(skip)] 527 codegen_raw: Vec<opt::CommaSeparated<Codegen>>, 528 529 /// Debug-related configuration options, `-D help` to see all. 530 #[arg(short = 'D', long = "debug", value_name = "KEY[=VAL[,..]]")] 531 #[serde(skip)] 532 debug_raw: Vec<opt::CommaSeparated<Debug>>, 533 534 /// Options for configuring semantic execution of WebAssembly, `-W help` to see 535 /// all. 536 #[arg(short = 'W', long = "wasm", value_name = "KEY[=VAL[,..]]")] 537 #[serde(skip)] 538 wasm_raw: Vec<opt::CommaSeparated<Wasm>>, 539 540 /// Options for configuring WASI and its proposals, `-S help` to see all. 541 #[arg(short = 'S', long = "wasi", value_name = "KEY[=VAL[,..]]")] 542 #[serde(skip)] 543 wasi_raw: Vec<opt::CommaSeparated<Wasi>>, 544 545 // These fields are filled in by the `configure` method below via the 546 // options parsed from the CLI above. This is what the CLI should use. 547 #[arg(skip)] 548 #[serde(skip)] 549 configured: bool, 550 551 #[arg(skip)] 552 #[serde(rename = "optimize", default)] 553 pub opts: OptimizeOptions, 554 555 #[arg(skip)] 556 #[serde(rename = "codegen", default)] 557 pub codegen: CodegenOptions, 558 559 #[arg(skip)] 560 #[serde(rename = "debug", default)] 561 pub debug: DebugOptions, 562 563 #[arg(skip)] 564 #[serde(rename = "wasm", default)] 565 pub wasm: WasmOptions, 566 567 #[arg(skip)] 568 #[serde(rename = "wasi", default)] 569 pub wasi: WasiOptions, 570 571 /// The target triple; default is the host triple 572 #[arg(long, value_name = "TARGET")] 573 #[serde(skip)] 574 pub target: Option<String>, 575 576 /// Use the specified TOML configuration file. 577 /// This TOML configuration file can provide same configuration options as the 578 /// `--optimize`, `--codgen`, `--debug`, `--wasm`, `--wasi` CLI options, with a couple exceptions. 579 /// 580 /// Additional options specified on the command line will take precedent over options loaded from 581 /// this TOML file. 582 #[arg(long = "config", value_name = "FILE")] 583 #[serde(skip)] 584 pub config: Option<PathBuf>, 585 } 586 587 macro_rules! match_feature { 588 ( 589 [$feat:tt : $config:expr] 590 $val:ident => $e:expr, 591 $p:pat => err, 592 ) => { 593 #[cfg(feature = $feat)] 594 { 595 if let Some($val) = $config { 596 $e; 597 } 598 } 599 #[cfg(not(feature = $feat))] 600 { 601 if let Some($p) = $config { 602 anyhow::bail!(concat!("support for ", $feat, " disabled at compile time")); 603 } 604 } 605 }; 606 } 607 608 impl CommonOptions { 609 /// Creates a blank new set of [`CommonOptions`] that can be configured. 610 pub fn new() -> CommonOptions { 611 CommonOptions { 612 opts_raw: Vec::new(), 613 codegen_raw: Vec::new(), 614 debug_raw: Vec::new(), 615 wasm_raw: Vec::new(), 616 wasi_raw: Vec::new(), 617 configured: true, 618 opts: Default::default(), 619 codegen: Default::default(), 620 debug: Default::default(), 621 wasm: Default::default(), 622 wasi: Default::default(), 623 target: None, 624 config: None, 625 } 626 } 627 628 fn configure(&mut self) -> Result<()> { 629 if self.configured { 630 return Ok(()); 631 } 632 self.configured = true; 633 if let Some(toml_config_path) = &self.config { 634 let toml_options = CommonOptions::from_file(toml_config_path)?; 635 self.opts = toml_options.opts; 636 self.codegen = toml_options.codegen; 637 self.debug = toml_options.debug; 638 self.wasm = toml_options.wasm; 639 self.wasi = toml_options.wasi; 640 } 641 self.opts.configure_with(&self.opts_raw); 642 self.codegen.configure_with(&self.codegen_raw); 643 self.debug.configure_with(&self.debug_raw); 644 self.wasm.configure_with(&self.wasm_raw); 645 self.wasi.configure_with(&self.wasi_raw); 646 Ok(()) 647 } 648 649 pub fn init_logging(&mut self) -> Result<()> { 650 self.configure()?; 651 if self.debug.logging == Some(false) { 652 return Ok(()); 653 } 654 #[cfg(feature = "logging")] 655 if self.debug.log_to_files == Some(true) { 656 let prefix = "wasmtime.dbg."; 657 init_file_per_thread_logger(prefix); 658 } else { 659 use std::io::IsTerminal; 660 use tracing_subscriber::{EnvFilter, FmtSubscriber}; 661 let builder = FmtSubscriber::builder() 662 .with_writer(std::io::stderr) 663 .with_env_filter(EnvFilter::from_env("WASMTIME_LOG")) 664 .with_ansi(std::io::stderr().is_terminal()); 665 if std::env::var("WASMTIME_LOG_NO_CONTEXT").is_ok_and(|value| value.eq("1")) { 666 builder 667 .with_level(false) 668 .with_target(false) 669 .without_time() 670 .init() 671 } else { 672 builder.init(); 673 } 674 } 675 #[cfg(not(feature = "logging"))] 676 if self.debug.log_to_files == Some(true) || self.debug.logging == Some(true) { 677 anyhow::bail!("support for logging disabled at compile time"); 678 } 679 Ok(()) 680 } 681 682 pub fn config(&mut self, pooling_allocator_default: Option<bool>) -> Result<Config> { 683 self.configure()?; 684 let mut config = Config::new(); 685 686 match_feature! { 687 ["cranelift" : self.codegen.compiler] 688 strategy => config.strategy(strategy), 689 _ => err, 690 } 691 match_feature! { 692 ["gc" : self.codegen.collector] 693 collector => config.collector(collector), 694 _ => err, 695 } 696 if let Some(target) = &self.target { 697 config.target(target)?; 698 } 699 match_feature! { 700 ["cranelift" : self.codegen.cranelift_debug_verifier] 701 enable => config.cranelift_debug_verifier(enable), 702 true => err, 703 } 704 if let Some(enable) = self.debug.debug_info { 705 config.debug_info(enable); 706 } 707 if self.debug.coredump.is_some() { 708 #[cfg(feature = "coredump")] 709 config.coredump_on_trap(true); 710 #[cfg(not(feature = "coredump"))] 711 anyhow::bail!("support for coredumps disabled at compile time"); 712 } 713 match_feature! { 714 ["cranelift" : self.opts.opt_level] 715 level => config.cranelift_opt_level(level), 716 _ => err, 717 } 718 match_feature! { 719 ["cranelift": self.opts.regalloc_algorithm] 720 algo => config.cranelift_regalloc_algorithm(algo), 721 _ => err, 722 } 723 match_feature! { 724 ["cranelift" : self.wasm.nan_canonicalization] 725 enable => config.cranelift_nan_canonicalization(enable), 726 true => err, 727 } 728 match_feature! { 729 ["cranelift" : self.codegen.pcc] 730 enable => config.cranelift_pcc(enable), 731 true => err, 732 } 733 734 self.enable_wasm_features(&mut config)?; 735 736 #[cfg(feature = "cranelift")] 737 for (name, value) in self.codegen.cranelift.iter() { 738 let name = name.replace('-', "_"); 739 unsafe { 740 match value { 741 Some(val) => { 742 config.cranelift_flag_set(&name, val); 743 } 744 None => { 745 config.cranelift_flag_enable(&name); 746 } 747 } 748 } 749 } 750 #[cfg(not(feature = "cranelift"))] 751 if !self.codegen.cranelift.is_empty() { 752 anyhow::bail!("support for cranelift disabled at compile time"); 753 } 754 755 #[cfg(feature = "cache")] 756 if self.codegen.cache != Some(false) { 757 use wasmtime::Cache; 758 let cache = match &self.codegen.cache_config { 759 Some(path) => Cache::from_file(Some(Path::new(path)))?, 760 None => Cache::from_file(None)?, 761 }; 762 config.cache(Some(cache)); 763 } 764 #[cfg(not(feature = "cache"))] 765 if self.codegen.cache == Some(true) { 766 anyhow::bail!("support for caching disabled at compile time"); 767 } 768 769 match_feature! { 770 ["parallel-compilation" : self.codegen.parallel_compilation] 771 enable => config.parallel_compilation(enable), 772 true => err, 773 } 774 775 let memory_reservation = self 776 .opts 777 .memory_reservation 778 .or(self.opts.static_memory_maximum_size); 779 if let Some(size) = memory_reservation { 780 config.memory_reservation(size); 781 } 782 783 if let Some(enable) = self.opts.static_memory_forced { 784 config.memory_may_move(!enable); 785 } 786 if let Some(enable) = self.opts.memory_may_move { 787 config.memory_may_move(enable); 788 } 789 790 let memory_guard_size = self 791 .opts 792 .static_memory_guard_size 793 .or(self.opts.dynamic_memory_guard_size) 794 .or(self.opts.memory_guard_size); 795 if let Some(size) = memory_guard_size { 796 config.memory_guard_size(size); 797 } 798 799 let mem_for_growth = self 800 .opts 801 .memory_reservation_for_growth 802 .or(self.opts.dynamic_memory_reserved_for_growth); 803 if let Some(size) = mem_for_growth { 804 config.memory_reservation_for_growth(size); 805 } 806 if let Some(enable) = self.opts.guard_before_linear_memory { 807 config.guard_before_linear_memory(enable); 808 } 809 if let Some(enable) = self.opts.table_lazy_init { 810 config.table_lazy_init(enable); 811 } 812 813 // If fuel has been configured, set the `consume fuel` flag on the config. 814 if self.wasm.fuel.is_some() { 815 config.consume_fuel(true); 816 } 817 818 if let Some(enable) = self.wasm.epoch_interruption { 819 config.epoch_interruption(enable); 820 } 821 if let Some(enable) = self.debug.address_map { 822 config.generate_address_map(enable); 823 } 824 if let Some(enable) = self.opts.memory_init_cow { 825 config.memory_init_cow(enable); 826 } 827 if let Some(size) = self.opts.memory_guaranteed_dense_image_size { 828 config.memory_guaranteed_dense_image_size(size); 829 } 830 if let Some(enable) = self.opts.signals_based_traps { 831 config.signals_based_traps(enable); 832 } 833 if let Some(enable) = self.codegen.native_unwind_info { 834 config.native_unwind_info(enable); 835 } 836 if let Some(enable) = self.codegen.inlining { 837 config.compiler_inlining(enable); 838 } 839 840 // async_stack_size enabled by either async or stack-switching, so 841 // cannot directly use match_feature! 842 #[cfg(any(feature = "async", feature = "stack-switching"))] 843 { 844 if let Some(size) = self.wasm.async_stack_size { 845 config.async_stack_size(size); 846 } 847 } 848 #[cfg(not(any(feature = "async", feature = "stack-switching")))] 849 { 850 if let Some(_size) = self.wasm.async_stack_size { 851 anyhow::bail!(concat!( 852 "support for async/stack-switching disabled at compile time" 853 )); 854 } 855 } 856 857 match_feature! { 858 ["pooling-allocator" : self.opts.pooling_allocator.or(pooling_allocator_default)] 859 enable => { 860 if enable { 861 let mut cfg = wasmtime::PoolingAllocationConfig::default(); 862 if let Some(size) = self.opts.pooling_memory_keep_resident { 863 cfg.linear_memory_keep_resident(size); 864 } 865 if let Some(size) = self.opts.pooling_table_keep_resident { 866 cfg.table_keep_resident(size); 867 } 868 if let Some(limit) = self.opts.pooling_total_core_instances { 869 cfg.total_core_instances(limit); 870 } 871 if let Some(limit) = self.opts.pooling_total_component_instances { 872 cfg.total_component_instances(limit); 873 } 874 if let Some(limit) = self.opts.pooling_total_memories { 875 cfg.total_memories(limit); 876 } 877 if let Some(limit) = self.opts.pooling_total_tables { 878 cfg.total_tables(limit); 879 } 880 if let Some(limit) = self.opts.pooling_table_elements 881 .or(self.wasm.max_table_elements) 882 { 883 cfg.table_elements(limit); 884 } 885 if let Some(limit) = self.opts.pooling_max_core_instance_size { 886 cfg.max_core_instance_size(limit); 887 } 888 match_feature! { 889 ["async" : self.opts.pooling_total_stacks] 890 limit => cfg.total_stacks(limit), 891 _ => err, 892 } 893 if let Some(max) = self.opts.pooling_max_memory_size 894 .or(self.wasm.max_memory_size) 895 { 896 cfg.max_memory_size(max); 897 } 898 if let Some(size) = self.opts.pooling_decommit_batch_size { 899 cfg.decommit_batch_size(size); 900 } 901 if let Some(max) = self.opts.pooling_max_unused_warm_slots { 902 cfg.max_unused_warm_slots(max); 903 } 904 match_feature! { 905 ["async" : self.opts.pooling_async_stack_keep_resident] 906 size => cfg.async_stack_keep_resident(size), 907 _ => err, 908 } 909 if let Some(max) = self.opts.pooling_max_component_instance_size { 910 cfg.max_component_instance_size(max); 911 } 912 if let Some(max) = self.opts.pooling_max_core_instances_per_component { 913 cfg.max_core_instances_per_component(max); 914 } 915 if let Some(max) = self.opts.pooling_max_memories_per_component { 916 cfg.max_memories_per_component(max); 917 } 918 if let Some(max) = self.opts.pooling_max_tables_per_component { 919 cfg.max_tables_per_component(max); 920 } 921 if let Some(max) = self.opts.pooling_max_tables_per_module { 922 cfg.max_tables_per_module(max); 923 } 924 if let Some(max) = self.opts.pooling_max_memories_per_module { 925 cfg.max_memories_per_module(max); 926 } 927 match_feature! { 928 ["memory-protection-keys" : self.opts.pooling_memory_protection_keys] 929 enable => cfg.memory_protection_keys(enable), 930 _ => err, 931 } 932 match_feature! { 933 ["memory-protection-keys" : self.opts.pooling_max_memory_protection_keys] 934 max => cfg.max_memory_protection_keys(max), 935 _ => err, 936 } 937 match_feature! { 938 ["gc" : self.opts.pooling_total_gc_heaps] 939 max => cfg.total_gc_heaps(max), 940 _ => err, 941 } 942 if let Some(enabled) = self.opts.pooling_pagemap_scan { 943 cfg.pagemap_scan(enabled); 944 } 945 config.allocation_strategy(wasmtime::InstanceAllocationStrategy::Pooling(cfg)); 946 } 947 }, 948 true => err, 949 } 950 951 if self.opts.pooling_memory_protection_keys.is_some() 952 && !self.opts.pooling_allocator.unwrap_or(false) 953 { 954 anyhow::bail!("memory protection keys require the pooling allocator"); 955 } 956 957 if self.opts.pooling_max_memory_protection_keys.is_some() 958 && !self.opts.pooling_memory_protection_keys.is_some() 959 { 960 anyhow::bail!( 961 "max memory protection keys requires memory protection keys to be enabled" 962 ); 963 } 964 965 match_feature! { 966 ["async" : self.wasm.async_stack_zeroing] 967 enable => config.async_stack_zeroing(enable), 968 _ => err, 969 } 970 971 if let Some(max) = self.wasm.max_wasm_stack { 972 config.max_wasm_stack(max); 973 974 // If `-Wasync-stack-size` isn't passed then automatically adjust it 975 // to the wasm stack size provided here too. That prevents the need 976 // to pass both when one can generally be inferred from the other. 977 #[cfg(any(feature = "async", feature = "stack-switching"))] 978 if self.wasm.async_stack_size.is_none() { 979 const DEFAULT_HOST_STACK: usize = 512 << 10; 980 config.async_stack_size(max + DEFAULT_HOST_STACK); 981 } 982 } 983 984 if let Some(enable) = self.wasm.relaxed_simd_deterministic { 985 config.relaxed_simd_deterministic(enable); 986 } 987 match_feature! { 988 ["cranelift" : self.wasm.wmemcheck] 989 enable => config.wmemcheck(enable), 990 true => err, 991 } 992 993 if let Some(enable) = self.wasm.gc_support { 994 config.gc_support(enable); 995 } 996 997 Ok(config) 998 } 999 1000 pub fn enable_wasm_features(&self, config: &mut Config) -> Result<()> { 1001 let all = self.wasm.all_proposals; 1002 1003 if let Some(enable) = self.wasm.simd.or(all) { 1004 config.wasm_simd(enable); 1005 } 1006 if let Some(enable) = self.wasm.relaxed_simd.or(all) { 1007 config.wasm_relaxed_simd(enable); 1008 } 1009 if let Some(enable) = self.wasm.bulk_memory.or(all) { 1010 config.wasm_bulk_memory(enable); 1011 } 1012 if let Some(enable) = self.wasm.multi_value.or(all) { 1013 config.wasm_multi_value(enable); 1014 } 1015 if let Some(enable) = self.wasm.tail_call.or(all) { 1016 config.wasm_tail_call(enable); 1017 } 1018 if let Some(enable) = self.wasm.multi_memory.or(all) { 1019 config.wasm_multi_memory(enable); 1020 } 1021 if let Some(enable) = self.wasm.memory64.or(all) { 1022 config.wasm_memory64(enable); 1023 } 1024 if let Some(enable) = self.wasm.stack_switching { 1025 config.wasm_stack_switching(enable); 1026 } 1027 if let Some(enable) = self.wasm.custom_page_sizes.or(all) { 1028 config.wasm_custom_page_sizes(enable); 1029 } 1030 if let Some(enable) = self.wasm.wide_arithmetic.or(all) { 1031 config.wasm_wide_arithmetic(enable); 1032 } 1033 if let Some(enable) = self.wasm.extended_const.or(all) { 1034 config.wasm_extended_const(enable); 1035 } 1036 1037 macro_rules! handle_conditionally_compiled { 1038 ($(($feature:tt, $field:tt, $method:tt))*) => ($( 1039 if let Some(enable) = self.wasm.$field.or(all) { 1040 #[cfg(feature = $feature)] 1041 config.$method(enable); 1042 #[cfg(not(feature = $feature))] 1043 if enable && all.is_none() { 1044 anyhow::bail!("support for {} was disabled at compile-time", $feature); 1045 } 1046 } 1047 )*) 1048 } 1049 1050 handle_conditionally_compiled! { 1051 ("component-model", component_model, wasm_component_model) 1052 ("component-model-async", component_model_async, wasm_component_model_async) 1053 ("component-model-async", component_model_async_builtins, wasm_component_model_async_builtins) 1054 ("component-model-async", component_model_async_stackful, wasm_component_model_async_stackful) 1055 ("component-model", component_model_error_context, wasm_component_model_error_context) 1056 ("threads", threads, wasm_threads) 1057 ("gc", gc, wasm_gc) 1058 ("gc", reference_types, wasm_reference_types) 1059 ("gc", function_references, wasm_function_references) 1060 ("gc", exceptions, wasm_exceptions) 1061 ("stack-switching", stack_switching, wasm_stack_switching) 1062 } 1063 1064 if let Some(enable) = self.wasm.component_model_gc { 1065 #[cfg(all(feature = "component-model", feature = "gc"))] 1066 config.wasm_component_model_gc(enable); 1067 #[cfg(not(all(feature = "component-model", feature = "gc")))] 1068 if enable && all.is_none() { 1069 anyhow::bail!("support for `component-model-gc` was disabled at compile time") 1070 } 1071 } 1072 1073 Ok(()) 1074 } 1075 1076 pub fn from_file<P: AsRef<Path>>(path: P) -> Result<Self> { 1077 let path_ref = path.as_ref(); 1078 let file_contents = fs::read_to_string(path_ref) 1079 .with_context(|| format!("failed to read config file: {path_ref:?}"))?; 1080 toml::from_str::<CommonOptions>(&file_contents) 1081 .with_context(|| format!("failed to parse TOML config file {path_ref:?}")) 1082 } 1083 } 1084 1085 #[cfg(test)] 1086 mod tests { 1087 use wasmtime::{OptLevel, RegallocAlgorithm}; 1088 1089 use super::*; 1090 1091 #[test] 1092 fn from_toml() { 1093 // empty toml 1094 let empty_toml = ""; 1095 let mut common_options: CommonOptions = toml::from_str(empty_toml).unwrap(); 1096 common_options.config(None).unwrap(); 1097 1098 // basic toml 1099 let basic_toml = r#" 1100 [optimize] 1101 [codegen] 1102 [debug] 1103 [wasm] 1104 [wasi] 1105 "#; 1106 let mut common_options: CommonOptions = toml::from_str(basic_toml).unwrap(); 1107 common_options.config(None).unwrap(); 1108 1109 // toml with custom deserialization to match CLI flag parsing 1110 for (opt_value, expected) in [ 1111 ("0", Some(OptLevel::None)), 1112 ("1", Some(OptLevel::Speed)), 1113 ("2", Some(OptLevel::Speed)), 1114 ("\"s\"", Some(OptLevel::SpeedAndSize)), 1115 ("\"hello\"", None), // should fail 1116 ("3", None), // should fail 1117 ] { 1118 let toml = format!( 1119 r#" 1120 [optimize] 1121 opt-level = {opt_value} 1122 "#, 1123 ); 1124 let parsed_opt_level = toml::from_str::<CommonOptions>(&toml) 1125 .ok() 1126 .and_then(|common_options| common_options.opts.opt_level); 1127 1128 assert_eq!( 1129 parsed_opt_level, expected, 1130 "Mismatch for input '{opt_value}'. Parsed: {parsed_opt_level:?}, Expected: {expected:?}" 1131 ); 1132 } 1133 1134 // Regalloc algorithm 1135 for (regalloc_value, expected) in [ 1136 ("\"backtracking\"", Some(RegallocAlgorithm::Backtracking)), 1137 ("\"single-pass\"", Some(RegallocAlgorithm::SinglePass)), 1138 ("\"hello\"", None), // should fail 1139 ("3", None), // should fail 1140 ("true", None), // should fail 1141 ] { 1142 let toml = format!( 1143 r#" 1144 [optimize] 1145 regalloc-algorithm = {regalloc_value} 1146 "#, 1147 ); 1148 let parsed_regalloc_algorithm = toml::from_str::<CommonOptions>(&toml) 1149 .ok() 1150 .and_then(|common_options| common_options.opts.regalloc_algorithm); 1151 assert_eq!( 1152 parsed_regalloc_algorithm, expected, 1153 "Mismatch for input '{regalloc_value}'. Parsed: {parsed_regalloc_algorithm:?}, Expected: {expected:?}" 1154 ); 1155 } 1156 1157 // Strategy 1158 for (strategy_value, expected) in [ 1159 ("\"cranelift\"", Some(wasmtime::Strategy::Cranelift)), 1160 ("\"winch\"", Some(wasmtime::Strategy::Winch)), 1161 ("\"hello\"", None), // should fail 1162 ("5", None), // should fail 1163 ("true", None), // should fail 1164 ] { 1165 let toml = format!( 1166 r#" 1167 [codegen] 1168 compiler = {strategy_value} 1169 "#, 1170 ); 1171 let parsed_strategy = toml::from_str::<CommonOptions>(&toml) 1172 .ok() 1173 .and_then(|common_options| common_options.codegen.compiler); 1174 assert_eq!( 1175 parsed_strategy, expected, 1176 "Mismatch for input '{strategy_value}'. Parsed: {parsed_strategy:?}, Expected: {expected:?}", 1177 ); 1178 } 1179 1180 // Collector 1181 for (collector_value, expected) in [ 1182 ( 1183 "\"drc\"", 1184 Some(wasmtime::Collector::DeferredReferenceCounting), 1185 ), 1186 ("\"null\"", Some(wasmtime::Collector::Null)), 1187 ("\"hello\"", None), // should fail 1188 ("5", None), // should fail 1189 ("true", None), // should fail 1190 ] { 1191 let toml = format!( 1192 r#" 1193 [codegen] 1194 collector = {collector_value} 1195 "#, 1196 ); 1197 let parsed_collector = toml::from_str::<CommonOptions>(&toml) 1198 .ok() 1199 .and_then(|common_options| common_options.codegen.collector); 1200 assert_eq!( 1201 parsed_collector, expected, 1202 "Mismatch for input '{collector_value}'. Parsed: {parsed_collector:?}, Expected: {expected:?}", 1203 ); 1204 } 1205 } 1206 } 1207 1208 impl Default for CommonOptions { 1209 fn default() -> CommonOptions { 1210 CommonOptions::new() 1211 } 1212 } 1213 1214 impl fmt::Display for CommonOptions { 1215 fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { 1216 let CommonOptions { 1217 codegen_raw, 1218 codegen, 1219 debug_raw, 1220 debug, 1221 opts_raw, 1222 opts, 1223 wasm_raw, 1224 wasm, 1225 wasi_raw, 1226 wasi, 1227 configured, 1228 target, 1229 config, 1230 } = self; 1231 if let Some(target) = target { 1232 write!(f, "--target {target} ")?; 1233 } 1234 if let Some(config) = config { 1235 write!(f, "--config {} ", config.display())?; 1236 } 1237 1238 let codegen_flags; 1239 let opts_flags; 1240 let wasi_flags; 1241 let wasm_flags; 1242 let debug_flags; 1243 1244 if *configured { 1245 codegen_flags = codegen.to_options(); 1246 debug_flags = debug.to_options(); 1247 wasi_flags = wasi.to_options(); 1248 wasm_flags = wasm.to_options(); 1249 opts_flags = opts.to_options(); 1250 } else { 1251 codegen_flags = codegen_raw 1252 .iter() 1253 .flat_map(|t| t.0.iter()) 1254 .cloned() 1255 .collect(); 1256 debug_flags = debug_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1257 wasi_flags = wasi_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1258 wasm_flags = wasm_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1259 opts_flags = opts_raw.iter().flat_map(|t| t.0.iter()).cloned().collect(); 1260 } 1261 1262 for flag in codegen_flags { 1263 write!(f, "-C{flag} ")?; 1264 } 1265 for flag in opts_flags { 1266 write!(f, "-O{flag} ")?; 1267 } 1268 for flag in wasi_flags { 1269 write!(f, "-S{flag} ")?; 1270 } 1271 for flag in wasm_flags { 1272 write!(f, "-W{flag} ")?; 1273 } 1274 for flag in debug_flags { 1275 write!(f, "-D{flag} ")?; 1276 } 1277 1278 Ok(()) 1279 } 1280 } 1281