1 /* vi:set ts=8 sts=4 sw=4 noet: 2 * 3 * VIM - Vi IMproved by Bram Moolenaar 4 * 5 * Do ":help uganda" in Vim to read copying and usage conditions. 6 * Do ":help credits" in Vim to see a list of people who contributed. 7 */ 8 9 #ifndef VIM__H 10 # define VIM__H 11 12 #include "protodef.h" 13 14 // _WIN32 is defined as 1 when the compilation target is 32-bit or 64-bit. 15 // Note: If you want to check for 64-bit use the _WIN64 macro. 16 #if defined(WIN32) || defined(_WIN32) 17 # define MSWIN 18 #endif 19 20 #ifdef MSWIN 21 # include <io.h> 22 #endif 23 24 // ============ the header file puzzle: order matters ========= 25 26 #ifdef HAVE_CONFIG_H // GNU autoconf (or something else) was here 27 # include "auto/config.h" 28 # define HAVE_PATHDEF 29 30 /* 31 * Check if configure correctly managed to find sizeof(int). If this failed, 32 * it becomes zero. This is likely a problem of not being able to run the 33 * test program. Other items from configure may also be wrong then! 34 */ 35 # if (VIM_SIZEOF_INT == 0) 36 # error configure did not run properly. Check auto/config.log. 37 # endif 38 39 # if (defined(__linux__) && !defined(__ANDROID__)) || defined(__CYGWIN__) 40 // Needed for strptime(). Needs to be done early, since header files can 41 // include other header files and end up including time.h, where these symbols 42 // matter for Vim. 43 // 700 is needed for mkdtemp(). 44 # ifndef _XOPEN_SOURCE 45 # define _XOPEN_SOURCE 700 46 # endif 47 # endif 48 49 /* 50 * Cygwin may have fchdir() in a newer release, but in most versions it 51 * doesn't work well and avoiding it keeps the binary backward compatible. 52 */ 53 # if defined(__CYGWIN32__) && defined(HAVE_FCHDIR) 54 # undef HAVE_FCHDIR 55 # endif 56 57 // We may need to define the uint32_t on non-Unix system, but using the same 58 // identifier causes conflicts. Therefore use UINT32_T. 59 # define UINT32_TYPEDEF uint32_t 60 #endif 61 62 // for INT_MAX, LONG_MAX et al. 63 #include <limits.h> 64 65 #if !defined(UINT32_TYPEDEF) 66 # if defined(uint32_t) // this doesn't catch typedefs, unfortunately 67 # define UINT32_TYPEDEF uint32_t 68 # else 69 // Fall back to assuming unsigned int is 32 bit. If this is wrong then the 70 // test in blowfish.c will fail. 71 # define UINT32_TYPEDEF unsigned int 72 # endif 73 #endif 74 75 // user ID of root is usually zero, but not for everybody 76 #ifdef __TANDEM 77 # ifndef _TANDEM_SOURCE 78 # define _TANDEM_SOURCE 79 # endif 80 # include <floss.h> 81 # define ROOT_UID 65535 82 # define OLDXAW 83 # if (_TANDEM_ARCH_ == 2 && __H_Series_RVU >= 621) 84 # define SA_ONSTACK_COMPATIBILITY 85 # endif 86 #else 87 # define ROOT_UID 0 88 #endif 89 90 /* 91 * MACOS_X compiling for Mac OS X 92 * MACOS_X_DARWIN integrating the darwin feature into MACOS_X 93 */ 94 #if defined(MACOS_X_DARWIN) && !defined(MACOS_X) 95 # define MACOS_X 96 #endif 97 // Unless made through the Makefile enforce GUI on Mac 98 #if defined(MACOS_X) && !defined(HAVE_CONFIG_H) 99 # define UNIX 100 #endif 101 102 #if defined(FEAT_GUI_MOTIF) \ 103 || defined(FEAT_GUI_GTK) \ 104 || defined(FEAT_GUI_ATHENA) \ 105 || defined(FEAT_GUI_HAIKU) \ 106 || defined(FEAT_GUI_MSWIN) \ 107 || defined(FEAT_GUI_PHOTON) 108 # define FEAT_GUI_ENABLED // also defined with NO_X11_INCLUDES 109 # if !defined(FEAT_GUI) && !defined(NO_X11_INCLUDES) 110 # define FEAT_GUI 111 # endif 112 #endif 113 114 // Check support for rendering options 115 #ifdef FEAT_GUI 116 # if defined(FEAT_DIRECTX) 117 # define FEAT_RENDER_OPTIONS 118 # endif 119 #endif 120 121 /* 122 * VIM_SIZEOF_INT is used in feature.h, and the system-specific included files 123 * need items from feature.h. Therefore define VIM_SIZEOF_INT here. 124 */ 125 #ifdef MSWIN 126 # define VIM_SIZEOF_INT 4 127 #endif 128 129 #ifdef AMIGA 130 // Be conservative about sizeof(int). It could be 4 too. 131 # ifndef FEAT_GUI_GTK // avoid problems when generating prototypes 132 # ifdef __GNUC__ 133 # define VIM_SIZEOF_INT 4 134 # else 135 # define VIM_SIZEOF_INT 2 136 # endif 137 # endif 138 #endif 139 #if defined(MACOS_X) && !defined(HAVE_CONFIG_H) 140 # define VIM_SIZEOF_INT __SIZEOF_INT__ 141 #endif 142 143 #if VIM_SIZEOF_INT < 4 && !defined(PROTO) 144 # error Vim only works with 32 bit int or larger 145 #endif 146 147 /* 148 * #defines for optionals and features 149 * Also defines FEAT_TINY, FEAT_SMALL, etc. when FEAT_HUGE is defined. 150 */ 151 #include "feature.h" 152 153 #if defined(MACOS_X_DARWIN) 154 # if defined(FEAT_SMALL) && !defined(FEAT_CLIPBOARD) 155 # define FEAT_CLIPBOARD 156 # endif 157 #endif 158 159 // +x11 is only enabled when it's both available and wanted. 160 #if defined(HAVE_X11) && defined(WANT_X11) 161 # define FEAT_X11 162 #endif 163 164 #ifdef NO_X11_INCLUDES 165 // In os_mac_conv.c and os_macosx.m NO_X11_INCLUDES is defined to avoid 166 // X11 headers. Disable all X11 related things to avoid conflicts. 167 # ifdef FEAT_X11 168 # undef FEAT_X11 169 # endif 170 # ifdef FEAT_GUI_X11 171 # undef FEAT_GUI_X11 172 # endif 173 # ifdef FEAT_XCLIPBOARD 174 # undef FEAT_XCLIPBOARD 175 # endif 176 # ifdef FEAT_GUI_MOTIF 177 # undef FEAT_GUI_MOTIF 178 # endif 179 # ifdef FEAT_GUI_ATHENA 180 # undef FEAT_GUI_ATHENA 181 # endif 182 # ifdef FEAT_GUI_GTK 183 # undef FEAT_GUI_GTK 184 # endif 185 # ifdef FEAT_BEVAL_TIP 186 # undef FEAT_BEVAL_TIP 187 # endif 188 # ifdef FEAT_XIM 189 # undef FEAT_XIM 190 # endif 191 # ifdef FEAT_CLIENTSERVER 192 # undef FEAT_CLIENTSERVER 193 # endif 194 #endif 195 196 // The Mac conversion stuff doesn't work under X11. 197 #if defined(MACOS_X_DARWIN) 198 # define MACOS_CONVERT 199 #endif 200 201 // Can't use "PACKAGE" here, conflicts with a Perl include file. 202 #ifndef VIMPACKAGE 203 # define VIMPACKAGE "vim" 204 #endif 205 206 /* 207 * Find out if function definitions should include argument types 208 */ 209 #ifdef AZTEC_C 210 # include <functions.h> 211 #endif 212 213 #ifdef SASC 214 # include <clib/exec_protos.h> 215 #endif 216 217 #ifdef _DCC 218 # include <clib/exec_protos.h> 219 #endif 220 221 #ifdef __HAIKU__ 222 # include "os_haiku.h" 223 # define __ARGS(x) x 224 #endif 225 226 #if (defined(UNIX) || defined(VMS)) \ 227 && (!defined(MACOS_X) || defined(HAVE_CONFIG_H)) 228 # include "os_unix.h" // bring lots of system header files 229 #endif 230 231 // Mark unused function arguments with UNUSED, so that gcc -Wunused-parameter 232 // can be used to check for mistakes. 233 #if defined(HAVE_ATTRIBUTE_UNUSED) || defined(__MINGW32__) 234 # if !defined(UNUSED) 235 # define UNUSED __attribute__((unused)) 236 # endif 237 #else 238 # define UNUSED 239 #endif 240 241 // Used to check for "sun", "__sun" is used by newer compilers. 242 #if defined(__sun) 243 # define SUN_SYSTEM 244 #endif 245 246 // If we're compiling in C++ (currently only KVim), the system 247 // headers must have the correct prototypes or nothing will build. 248 // Conversely, our prototypes might clash due to throw() specifiers and 249 // cause compilation failures even though the headers are correct. For 250 // a concrete example, gcc-3.2 enforces exception specifications, and 251 // glibc-2.2.5 has them in their system headers. 252 #if !defined(__cplusplus) && defined(UNIX) \ 253 && !defined(MACOS_X) // MACOS_X doesn't yet support osdef.h 254 # include "auto/osdef.h" // bring missing declarations in 255 #endif 256 257 #ifdef AMIGA 258 # include "os_amiga.h" 259 #endif 260 261 #ifdef MSWIN 262 # include "os_win32.h" 263 #endif 264 265 #if defined(MACOS_X) 266 # include "os_mac.h" 267 #endif 268 269 #ifdef __QNX__ 270 # include "os_qnx.h" 271 #endif 272 273 #ifdef X_LOCALE 274 # include <X11/Xlocale.h> 275 #else 276 # ifdef HAVE_LOCALE_H 277 # include <locale.h> 278 # endif 279 #endif 280 281 /* 282 * Maximum length of a path (for non-unix systems) Make it a bit long, to stay 283 * on the safe side. But not too long to put on the stack. 284 */ 285 #ifndef MAXPATHL 286 # ifdef MAXPATHLEN 287 # define MAXPATHL MAXPATHLEN 288 # else 289 # define MAXPATHL 256 290 # endif 291 #endif 292 #ifdef BACKSLASH_IN_FILENAME 293 # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`%#'\"|!<") 294 #else 295 # ifdef VMS 296 // VMS allows a lot of characters in the file name 297 # define PATH_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'\"|!") 298 # define SHELL_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'|!()&") 299 # else 300 # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<") 301 # define SHELL_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<>();&") 302 # endif 303 #endif 304 305 // length of a buffer to store a number in ASCII (64 bits binary + NUL) 306 #define NUMBUFLEN 65 307 308 // flags for vim_str2nr() 309 #define STR2NR_BIN 0x01 310 #define STR2NR_OCT 0x02 311 #define STR2NR_HEX 0x04 312 #define STR2NR_OOCT 0x08 // Octal with prefix "0o": 0o777 313 #define STR2NR_ALL (STR2NR_BIN + STR2NR_OCT + STR2NR_HEX + STR2NR_OOCT) 314 #define STR2NR_NO_OCT (STR2NR_BIN + STR2NR_HEX + STR2NR_OOCT) 315 316 #define STR2NR_FORCE 0x80 // only when ONE of the above is used 317 318 #define STR2NR_QUOTE 0x10 // ignore embedded single quotes 319 320 /* 321 * Shorthand for unsigned variables. Many systems, but not all, have u_char 322 * already defined, so we use char_u to avoid trouble. 323 */ 324 typedef unsigned char char_u; 325 typedef unsigned short short_u; 326 typedef unsigned int int_u; 327 328 // Make sure long_u is big enough to hold a pointer. 329 // On Win64, longs are 32 bits and pointers are 64 bits. 330 // For printf() and scanf(), we need to take care of long_u specifically. 331 #ifdef _WIN64 332 typedef unsigned __int64 long_u; 333 typedef __int64 long_i; 334 # define SCANF_HEX_LONG_U "%llx" 335 # define SCANF_DECIMAL_LONG_U "%llu" 336 # define PRINTF_HEX_LONG_U "0x%llx" 337 #else 338 // Microsoft-specific. The __w64 keyword should be specified on any typedefs 339 // that change size between 32-bit and 64-bit platforms. For any such type, 340 // __w64 should appear only on the 32-bit definition of the typedef. 341 // Define __w64 as an empty token for everything but MSVC 7.x or later. 342 # if !defined(_MSC_VER) || (_MSC_VER < 1300) 343 # define __w64 344 # endif 345 typedef unsigned long __w64 long_u; 346 typedef long __w64 long_i; 347 # define SCANF_HEX_LONG_U "%lx" 348 # define SCANF_DECIMAL_LONG_U "%lu" 349 # define PRINTF_HEX_LONG_U "0x%lx" 350 #endif 351 #define PRINTF_DECIMAL_LONG_U SCANF_DECIMAL_LONG_U 352 353 /* 354 * Only systems which use configure will have SIZEOF_OFF_T and VIM_SIZEOF_LONG 355 * defined, which is ok since those are the same systems which can have 356 * varying sizes for off_t. The other systems will continue to use "%ld" to 357 * print off_t since off_t is simply a typedef to long for them. 358 */ 359 #if defined(SIZEOF_OFF_T) && (SIZEOF_OFF_T > VIM_SIZEOF_LONG) 360 # define LONG_LONG_OFF_T 361 #endif 362 363 /* 364 * We use 64-bit file functions here, if available. E.g. ftello() returns 365 * off_t instead of long, which helps if long is 32 bit and off_t is 64 bit. 366 * We assume that when fseeko() is available then ftello() is too. 367 * Note that Windows has different function names. 368 */ 369 #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) 370 typedef __int64 off_T; 371 # ifdef __MINGW32__ 372 # define vim_lseek lseek64 373 # define vim_fseek fseeko64 374 # define vim_ftell ftello64 375 # else 376 # define vim_lseek _lseeki64 377 # define vim_fseek _fseeki64 378 # define vim_ftell _ftelli64 379 # endif 380 #else 381 # ifdef PROTO 382 typedef long off_T; 383 # else 384 typedef off_t off_T; 385 # endif 386 # ifdef HAVE_FSEEKO 387 # define vim_lseek lseek 388 # define vim_ftell ftello 389 # define vim_fseek fseeko 390 # else 391 # define vim_lseek lseek 392 # define vim_ftell ftell 393 # define vim_fseek(a, b, c) fseek(a, (long)b, c) 394 # endif 395 #endif 396 397 /* 398 * The characters and attributes cached for the screen. 399 */ 400 typedef char_u schar_T; 401 typedef unsigned short sattr_T; 402 #define MAX_TYPENR 65535 403 404 /* 405 * The u8char_T can hold one decoded UTF-8 character. 406 * We use 32 bits, since some Asian characters don't fit in 16 bits. 407 */ 408 typedef unsigned int u8char_T; // int is 32 bits or more 409 410 #ifndef UNIX // For Unix this is included in os_unix.h 411 # include <stdio.h> 412 # include <ctype.h> 413 #endif 414 415 #include "ascii.h" 416 #include "keymap.h" 417 #include "term.h" 418 #include "macros.h" 419 420 #ifdef LATTICE 421 # include <sys/types.h> 422 # include <sys/stat.h> 423 #endif 424 #ifdef _DCC 425 # include <sys/stat.h> 426 #endif 427 #if defined(MSWIN) 428 # include <sys/stat.h> 429 #endif 430 431 #if defined(HAVE_ERRNO_H) || defined(MSWIN) 432 # include <errno.h> 433 #endif 434 435 /* 436 * Allow other (non-unix) systems to configure themselves now 437 * These are also in os_unix.h, because osdef.sh needs them there. 438 */ 439 #ifndef UNIX 440 // Note: Some systems need both string.h and strings.h (Savage). If the 441 // system can't handle this, define NO_STRINGS_WITH_STRING_H. 442 # ifdef HAVE_STRING_H 443 # include <string.h> 444 # endif 445 # if defined(HAVE_STRINGS_H) && !defined(NO_STRINGS_WITH_STRING_H) 446 # include <strings.h> 447 # endif 448 # ifdef HAVE_STAT_H 449 # include <stat.h> 450 # endif 451 # ifdef HAVE_STDLIB_H 452 # include <stdlib.h> 453 # endif 454 #endif // NON-UNIX 455 456 #include <assert.h> 457 458 #ifdef HAVE_STDINT_H 459 # include <stdint.h> 460 #endif 461 #ifdef HAVE_INTTYPES_H 462 # include <inttypes.h> 463 #endif 464 #ifdef HAVE_WCTYPE_H 465 # include <wctype.h> 466 #endif 467 #include <stdarg.h> 468 469 // for offsetof() 470 #include <stddef.h> 471 472 #if defined(HAVE_SYS_SELECT_H) && \ 473 (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) 474 # include <sys/select.h> 475 #endif 476 477 #ifndef HAVE_SELECT 478 # ifdef HAVE_SYS_POLL_H 479 # include <sys/poll.h> 480 # elif defined(MSWIN) 481 # define HAVE_SELECT 482 # else 483 # ifdef HAVE_POLL_H 484 # include <poll.h> 485 # endif 486 # endif 487 #endif 488 489 // ================ end of the header file puzzle =============== 490 491 /* 492 * For dynamically loaded imm library. Currently, only for Win32. 493 */ 494 #ifdef DYNAMIC_IME 495 # ifndef FEAT_MBYTE_IME 496 # define FEAT_MBYTE_IME 497 # endif 498 #endif 499 500 /* 501 * For dynamically loaded gettext library. Currently, only for Win32. 502 */ 503 #ifdef DYNAMIC_GETTEXT 504 # ifndef FEAT_GETTEXT 505 # define FEAT_GETTEXT 506 # endif 507 // These are in os_win32.c 508 extern char *(*dyn_libintl_gettext)(const char *msgid); 509 extern char *(*dyn_libintl_ngettext)(const char *msgid, const char *msgid_plural, unsigned long n); 510 extern char *(*dyn_libintl_bindtextdomain)(const char *domainname, const char *dirname); 511 extern char *(*dyn_libintl_bind_textdomain_codeset)(const char *domainname, const char *codeset); 512 extern char *(*dyn_libintl_textdomain)(const char *domainname); 513 extern int (*dyn_libintl_wputenv)(const wchar_t *envstring); 514 #endif 515 516 517 /* 518 * The _() stuff is for using gettext(). It is a no-op when libintl.h is not 519 * found or the +multilang feature is disabled. 520 * Use NGETTEXT(single, multi, number) to get plural behavior: 521 * - single - message for singular form 522 * - multi - message for plural form 523 * - number - the count 524 */ 525 #ifdef FEAT_GETTEXT 526 # ifdef DYNAMIC_GETTEXT 527 # define _(x) (*dyn_libintl_gettext)((char *)(x)) 528 # define NGETTEXT(x, xs, n) (*dyn_libintl_ngettext)((char *)(x), (char *)(xs), (n)) 529 # define N_(x) x 530 # define bindtextdomain(domain, dir) (*dyn_libintl_bindtextdomain)((domain), (dir)) 531 # define bind_textdomain_codeset(domain, codeset) (*dyn_libintl_bind_textdomain_codeset)((domain), (codeset)) 532 # if !defined(HAVE_BIND_TEXTDOMAIN_CODESET) 533 # define HAVE_BIND_TEXTDOMAIN_CODESET 1 534 # endif 535 # define textdomain(domain) (*dyn_libintl_textdomain)(domain) 536 # define libintl_wputenv(envstring) (*dyn_libintl_wputenv)(envstring) 537 # else 538 # include <libintl.h> 539 # define _(x) gettext((char *)(x)) 540 # define NGETTEXT(x, xs, n) ngettext((x), (xs), (n)) 541 # ifdef gettext_noop 542 # define N_(x) gettext_noop(x) 543 # else 544 # define N_(x) x 545 # endif 546 # endif 547 #else 548 # define _(x) ((char *)(x)) 549 # define NGETTEXT(x, xs, n) (((n) == 1) ? (char *)(x) : (char *)(xs)) 550 # define N_(x) x 551 # ifdef bindtextdomain 552 # undef bindtextdomain 553 # endif 554 # define bindtextdomain(x, y) // empty 555 # ifdef bind_textdomain_codeset 556 # undef bind_textdomain_codeset 557 # endif 558 # define bind_textdomain_codeset(x, y) // empty 559 # ifdef textdomain 560 # undef textdomain 561 # endif 562 # define textdomain(x) // empty 563 #endif 564 565 /* 566 * flags for update_screen() 567 * The higher the value, the higher the priority 568 */ 569 #define VALID_NO_UPDATE 5 // no new changes, keep the command line if 570 // possible 571 #define VALID 10 // buffer not changed, or changes marked 572 // with b_mod_* 573 #define INVERTED 20 // redisplay inverted part that changed 574 #define INVERTED_ALL 25 // redisplay whole inverted part 575 #define REDRAW_TOP 30 // display first w_upd_rows screen lines 576 #define SOME_VALID 35 // like NOT_VALID but may scroll 577 #define NOT_VALID 40 // buffer needs complete redraw 578 #define CLEAR 50 // screen messed up, clear it 579 580 // flags for screen_line() 581 #define SLF_RIGHTLEFT 1 582 #define SLF_POPUP 2 583 584 #define MB_FILLER_CHAR '<' // character used when a double-width character 585 // doesn't fit. 586 587 /* 588 * Flags for w_valid. 589 * These are set when something in a window structure becomes invalid, except 590 * when the cursor is moved. Call check_cursor_moved() before testing one of 591 * the flags. 592 * These are reset when that thing has been updated and is valid again. 593 * 594 * Every function that invalidates one of these must call one of the 595 * invalidate_* functions. 596 * 597 * w_valid is supposed to be used only in screen.c. From other files, use the 598 * functions that set or reset the flags. 599 * 600 * VALID_BOTLINE VALID_BOTLINE_AP 601 * on on w_botline valid 602 * off on w_botline approximated 603 * off off w_botline not valid 604 * on off not possible 605 */ 606 #define VALID_WROW 0x01 // w_wrow (window row) is valid 607 #define VALID_WCOL 0x02 // w_wcol (window col) is valid 608 #define VALID_VIRTCOL 0x04 // w_virtcol (file col) is valid 609 #define VALID_CHEIGHT 0x08 // w_cline_height and w_cline_folded valid 610 #define VALID_CROW 0x10 // w_cline_row is valid 611 #define VALID_BOTLINE 0x20 // w_botine and w_empty_rows are valid 612 #define VALID_BOTLINE_AP 0x40 // w_botine is approximated 613 #define VALID_TOPLINE 0x80 // w_topline is valid (for cursor position) 614 615 // Values for w_popup_flags. 616 #define POPF_IS_POPUP 0x01 // this is a popup window 617 #define POPF_HIDDEN 0x02 // popup is not displayed 618 #define POPF_CURSORLINE 0x04 // popup is highlighting at the cursorline 619 #define POPF_ON_CMDLINE 0x08 // popup overlaps command line 620 #define POPF_DRAG 0x10 // popup can be moved by dragging 621 #define POPF_RESIZE 0x20 // popup can be resized by dragging 622 #define POPF_MAPPING 0x40 // mapping keys 623 #define POPF_INFO 0x80 // used for info of popup menu 624 #define POPF_INFO_MENU 0x100 // align info popup with popup menu 625 #define POPF_POSINVERT 0x200 // vertical position can be inverted 626 627 // flags used in w_popup_handled 628 #define POPUP_HANDLED_1 0x01 // used by mouse_find_win() 629 #define POPUP_HANDLED_2 0x02 // used by popup_do_filter() 630 #define POPUP_HANDLED_3 0x04 // used by popup_check_cursor_pos() 631 #define POPUP_HANDLED_4 0x08 // used by may_update_popup_mask() 632 #define POPUP_HANDLED_5 0x10 // used by update_popups() 633 634 /* 635 * Terminal highlighting attribute bits. 636 * Attributes above HL_ALL are used for syntax highlighting. 637 */ 638 #define HL_NORMAL 0x00 639 #define HL_INVERSE 0x01 640 #define HL_BOLD 0x02 641 #define HL_ITALIC 0x04 642 #define HL_UNDERLINE 0x08 643 #define HL_UNDERCURL 0x10 644 #define HL_STANDOUT 0x20 645 #define HL_NOCOMBINE 0x40 646 #define HL_STRIKETHROUGH 0x80 647 #define HL_ALL 0xff 648 649 // special attribute addition: Put message in history 650 #define MSG_HIST 0x1000 651 652 /* 653 * values for State 654 * 655 * The lower bits up to 0x20 are used to distinguish normal/visual/op_pending 656 * and cmdline/insert+replace mode. This is used for mapping. If none of 657 * these bits are set, no mapping is done. 658 * The upper bits are used to distinguish between other states. 659 */ 660 #define NORMAL 0x01 // Normal mode, command expected 661 #define VISUAL 0x02 // Visual mode - use get_real_state() 662 #define OP_PENDING 0x04 // Normal mode, operator is pending - use 663 // get_real_state() 664 #define CMDLINE 0x08 // Editing command line 665 #define INSERT 0x10 // Insert mode 666 #define LANGMAP 0x20 // Language mapping, can be combined with 667 // INSERT and CMDLINE 668 669 #define REPLACE_FLAG 0x40 // Replace mode flag 670 #define REPLACE (REPLACE_FLAG + INSERT) 671 #define VREPLACE_FLAG 0x80 // Virtual-replace mode flag 672 #define VREPLACE (REPLACE_FLAG + VREPLACE_FLAG + INSERT) 673 #define LREPLACE (REPLACE_FLAG + LANGMAP) 674 675 #define NORMAL_BUSY (0x100 + NORMAL) // Normal mode, busy with a command 676 #define HITRETURN (0x200 + NORMAL) // waiting for return or command 677 #define ASKMORE 0x300 // Asking if you want --more-- 678 #define SETWSIZE 0x400 // window size has changed 679 #define ABBREV 0x500 // abbreviation instead of mapping 680 #define EXTERNCMD 0x600 // executing an external command 681 #define SHOWMATCH (0x700 + INSERT) // show matching paren 682 #define CONFIRM 0x800 // ":confirm" prompt 683 #define SELECTMODE 0x1000 // Select mode, only for mappings 684 #define TERMINAL 0x2000 // Terminal mode 685 #define MODE_ALL 0xffff 686 687 // all mode bits used for mapping 688 #define MAP_ALL_MODES (0x3f | SELECTMODE | TERMINAL) 689 690 // directions 691 #define FORWARD 1 692 #define BACKWARD (-1) 693 #define FORWARD_FILE 3 694 #define BACKWARD_FILE (-3) 695 696 // return values for functions 697 #if !(defined(OK) && (OK == 1)) 698 // OK already defined to 1 in MacOS X curses, skip this 699 # define OK 1 700 #endif 701 #define FAIL 0 702 #define NOTDONE 2 // not OK or FAIL but skipped 703 704 // flags for b_flags 705 #define BF_RECOVERED 0x01 // buffer has been recovered 706 #define BF_CHECK_RO 0x02 // need to check readonly when loading file 707 // into buffer (set by ":e", may be reset by 708 // ":buf" 709 #define BF_NEVERLOADED 0x04 // file has never been loaded into buffer, 710 // many variables still need to be set 711 #define BF_NOTEDITED 0x08 // Set when file name is changed after 712 // starting to edit, reset when file is 713 // written out. 714 #define BF_NEW 0x10 // file didn't exist when editing started 715 #define BF_NEW_W 0x20 // Warned for BF_NEW and file created 716 #define BF_READERR 0x40 // got errors while reading the file 717 #define BF_DUMMY 0x80 // dummy buffer, only used internally 718 #define BF_PRESERVED 0x100 // ":preserve" was used 719 #define BF_SYN_SET 0x200 // 'syntax' option was set 720 #define BF_NO_SEA 0x400 // no swap_exists_action (ATTENTION prompt) 721 722 // Mask to check for flags that prevent normal writing 723 #define BF_WRITE_MASK (BF_NOTEDITED + BF_NEW + BF_READERR) 724 725 /* 726 * values for xp_context when doing command line completion 727 */ 728 #define EXPAND_UNSUCCESSFUL (-2) 729 #define EXPAND_OK (-1) 730 #define EXPAND_NOTHING 0 731 #define EXPAND_COMMANDS 1 732 #define EXPAND_FILES 2 733 #define EXPAND_DIRECTORIES 3 734 #define EXPAND_SETTINGS 4 735 #define EXPAND_BOOL_SETTINGS 5 736 #define EXPAND_TAGS 6 737 #define EXPAND_OLD_SETTING 7 738 #define EXPAND_HELP 8 739 #define EXPAND_BUFFERS 9 740 #define EXPAND_EVENTS 10 741 #define EXPAND_MENUS 11 742 #define EXPAND_SYNTAX 12 743 #define EXPAND_HIGHLIGHT 13 744 #define EXPAND_AUGROUP 14 745 #define EXPAND_USER_VARS 15 746 #define EXPAND_MAPPINGS 16 747 #define EXPAND_TAGS_LISTFILES 17 748 #define EXPAND_FUNCTIONS 18 749 #define EXPAND_USER_FUNC 19 750 #define EXPAND_EXPRESSION 20 751 #define EXPAND_MENUNAMES 21 752 #define EXPAND_USER_COMMANDS 22 753 #define EXPAND_USER_CMD_FLAGS 23 754 #define EXPAND_USER_NARGS 24 755 #define EXPAND_USER_COMPLETE 25 756 #define EXPAND_ENV_VARS 26 757 #define EXPAND_LANGUAGE 27 758 #define EXPAND_COLORS 28 759 #define EXPAND_COMPILER 29 760 #define EXPAND_USER_DEFINED 30 761 #define EXPAND_USER_LIST 31 762 #define EXPAND_SHELLCMD 32 763 #define EXPAND_CSCOPE 33 764 #define EXPAND_SIGN 34 765 #define EXPAND_PROFILE 35 766 #define EXPAND_BEHAVE 36 767 #define EXPAND_FILETYPE 37 768 #define EXPAND_FILES_IN_PATH 38 769 #define EXPAND_OWNSYNTAX 39 770 #define EXPAND_LOCALES 40 771 #define EXPAND_HISTORY 41 772 #define EXPAND_USER 42 773 #define EXPAND_SYNTIME 43 774 #define EXPAND_USER_ADDR_TYPE 44 775 #define EXPAND_PACKADD 45 776 #define EXPAND_MESSAGES 46 777 #define EXPAND_MAPCLEAR 47 778 #define EXPAND_ARGLIST 48 779 #define EXPAND_DIFF_BUFFERS 49 780 #define EXPAND_DISASSEMBLE 50 781 782 // Values for exmode_active (0 is no exmode) 783 #define EXMODE_NORMAL 1 784 #define EXMODE_VIM 2 785 786 // Values for nextwild() and ExpandOne(). See ExpandOne() for meaning. 787 #define WILD_FREE 1 788 #define WILD_EXPAND_FREE 2 789 #define WILD_EXPAND_KEEP 3 790 #define WILD_NEXT 4 791 #define WILD_PREV 5 792 #define WILD_ALL 6 793 #define WILD_LONGEST 7 794 #define WILD_ALL_KEEP 8 795 796 #define WILD_LIST_NOTFOUND 0x01 797 #define WILD_HOME_REPLACE 0x02 798 #define WILD_USE_NL 0x04 799 #define WILD_NO_BEEP 0x08 800 #define WILD_ADD_SLASH 0x10 801 #define WILD_KEEP_ALL 0x20 802 #define WILD_SILENT 0x40 803 #define WILD_ESCAPE 0x80 804 #define WILD_ICASE 0x100 805 #define WILD_ALLLINKS 0x200 806 #define WILD_IGNORE_COMPLETESLASH 0x400 807 #define WILD_NOERROR 0x800 // sets EW_NOERROR 808 #define WILD_BUFLASTUSED 0x1000 809 #define BUF_DIFF_FILTER 0x2000 810 811 // Flags for expand_wildcards() 812 #define EW_DIR 0x01 // include directory names 813 #define EW_FILE 0x02 // include file names 814 #define EW_NOTFOUND 0x04 // include not found names 815 #define EW_ADDSLASH 0x08 // append slash to directory name 816 #define EW_KEEPALL 0x10 // keep all matches 817 #define EW_SILENT 0x20 // don't print "1 returned" from shell 818 #define EW_EXEC 0x40 // executable files 819 #define EW_PATH 0x80 // search in 'path' too 820 #define EW_ICASE 0x100 // ignore case 821 #define EW_NOERROR 0x200 // no error for bad regexp 822 #define EW_NOTWILD 0x400 // add match with literal name if exists 823 #define EW_KEEPDOLLAR 0x800 // do not escape $, $var is expanded 824 // Note: mostly EW_NOTFOUND and EW_SILENT are mutually exclusive: EW_NOTFOUND 825 // is used when executing commands and EW_SILENT for interactive expanding. 826 #define EW_ALLLINKS 0x1000 // also links not pointing to existing file 827 #define EW_SHELLCMD 0x2000 // called from expand_shellcmd(), don't check 828 // if executable is in $PATH 829 #define EW_DODOT 0x4000 // also files starting with a dot 830 #define EW_EMPTYOK 0x8000 // no matches is not an error 831 #define EW_NOTENV 0x10000 // do not expand environment variables 832 833 // Flags for find_file_*() functions. 834 #define FINDFILE_FILE 0 // only files 835 #define FINDFILE_DIR 1 // only directories 836 #define FINDFILE_BOTH 2 // files and directories 837 838 #define W_ENDCOL(wp) (wp->w_wincol + wp->w_width) 839 #ifdef FEAT_MENU 840 # define W_WINROW(wp) (wp->w_winrow + wp->w_winbar_height) 841 #else 842 # define W_WINROW(wp) (wp->w_winrow) 843 #endif 844 845 // Values for the find_pattern_in_path() function args 'type' and 'action': 846 #define FIND_ANY 1 847 #define FIND_DEFINE 2 848 #define CHECK_PATH 3 849 850 #define ACTION_SHOW 1 851 #define ACTION_GOTO 2 852 #define ACTION_SPLIT 3 853 #define ACTION_SHOW_ALL 4 854 #define ACTION_EXPAND 5 855 856 #ifdef FEAT_SYN_HL 857 # define SST_MIN_ENTRIES 150 // minimal size for state stack array 858 # define SST_MAX_ENTRIES 1000 // maximal size for state stack array 859 # define SST_FIX_STATES 7 // size of sst_stack[]. 860 # define SST_DIST 16 // normal distance between entries 861 # define SST_INVALID (synstate_T *)-1 // invalid syn_state pointer 862 863 # define HL_CONTAINED 0x01 // not used on toplevel 864 # define HL_TRANSP 0x02 // has no highlighting 865 # define HL_ONELINE 0x04 // match within one line only 866 # define HL_HAS_EOL 0x08 // end pattern that matches with $ 867 # define HL_SYNC_HERE 0x10 // sync point after this item (syncing only) 868 # define HL_SYNC_THERE 0x20 // sync point at current line (syncing only) 869 # define HL_MATCH 0x40 // use match ID instead of item ID 870 # define HL_SKIPNL 0x80 // nextgroup can skip newlines 871 # define HL_SKIPWHITE 0x100 // nextgroup can skip white space 872 # define HL_SKIPEMPTY 0x200 // nextgroup can skip empty lines 873 # define HL_KEEPEND 0x400 // end match always kept 874 # define HL_EXCLUDENL 0x800 // exclude NL from match 875 # define HL_DISPLAY 0x1000 // only used for displaying, not syncing 876 # define HL_FOLD 0x2000 // define fold 877 # define HL_EXTEND 0x4000 // ignore a keepend 878 # define HL_MATCHCONT 0x8000 // match continued from previous line 879 # define HL_TRANS_CONT 0x10000 // transparent item without contains arg 880 # define HL_CONCEAL 0x20000 // can be concealed 881 # define HL_CONCEALENDS 0x40000 // can be concealed 882 #endif 883 884 // Values for 'options' argument in do_search() and searchit() 885 #define SEARCH_REV 0x01 // go in reverse of previous dir. 886 #define SEARCH_ECHO 0x02 // echo the search command and handle options 887 #define SEARCH_MSG 0x0c // give messages (yes, it's not 0x04) 888 #define SEARCH_NFMSG 0x08 // give all messages except not found 889 #define SEARCH_OPT 0x10 // interpret optional flags 890 #define SEARCH_HIS 0x20 // put search pattern in history 891 #define SEARCH_END 0x40 // put cursor at end of match 892 #define SEARCH_NOOF 0x80 // don't add offset to position 893 #define SEARCH_START 0x100 // start search without col offset 894 #define SEARCH_MARK 0x200 // set previous context mark 895 #define SEARCH_KEEP 0x400 // keep previous search pattern 896 #define SEARCH_PEEK 0x800 // peek for typed char, cancel search 897 #define SEARCH_COL 0x1000 // start at specified column instead of zero 898 899 // Values for find_ident_under_cursor() 900 #define FIND_IDENT 1 // find identifier (word) 901 #define FIND_STRING 2 // find any string (WORD) 902 #define FIND_EVAL 4 // include "->", "[]" and "." 903 #define FIND_NOERROR 8 // no error when no word found 904 905 // Values for file_name_in_line() 906 #define FNAME_MESS 1 // give error message 907 #define FNAME_EXP 2 // expand to path 908 #define FNAME_HYP 4 // check for hypertext link 909 #define FNAME_INCL 8 // apply 'includeexpr' 910 #define FNAME_REL 16 // ".." and "./" are relative to the (current) 911 // file instead of the current directory 912 #define FNAME_UNESC 32 // remove backslashes used for escaping 913 914 // Values for buflist_getfile() 915 #define GETF_SETMARK 0x01 // set pcmark before jumping 916 #define GETF_ALT 0x02 // jumping to alternate file (not buf num) 917 #define GETF_SWITCH 0x04 // respect 'switchbuf' settings when jumping 918 919 // Return values of getfile() 920 #define GETFILE_ERROR 1 // normal error 921 #define GETFILE_NOT_WRITTEN 2 // "not written" error 922 #define GETFILE_SAME_FILE 0 // success, same file 923 #define GETFILE_OPEN_OTHER -1 // success, opened another file 924 #define GETFILE_UNUSED 8 925 #define GETFILE_SUCCESS(x) ((x) <= 0) 926 927 // Values for buflist_new() flags 928 #define BLN_CURBUF 1 // may re-use curbuf for new buffer 929 #define BLN_LISTED 2 // put new buffer in buffer list 930 #define BLN_DUMMY 4 // allocating dummy buffer 931 #define BLN_NEW 8 // create a new buffer 932 #define BLN_NOOPT 16 // don't copy options to existing buffer 933 #define BLN_DUMMY_OK 32 // also find an existing dummy buffer 934 #define BLN_REUSE 64 // may re-use number from buf_reuse 935 #define BLN_NOCURWIN 128 // buffer is not associated with curwin 936 937 // Values for in_cinkeys() 938 #define KEY_OPEN_FORW 0x101 939 #define KEY_OPEN_BACK 0x102 940 #define KEY_COMPLETE 0x103 // end of completion 941 942 // Values for "noremap" argument of ins_typebuf(). Also used for 943 // map->m_noremap and menu->noremap[]. 944 #define REMAP_YES 0 // allow remapping 945 #define REMAP_NONE -1 // no remapping 946 #define REMAP_SCRIPT -2 // remap script-local mappings only 947 #define REMAP_SKIP -3 // no remapping for first char 948 949 // Values for mch_call_shell() second argument 950 #define SHELL_FILTER 1 // filtering text 951 #define SHELL_EXPAND 2 // expanding wildcards 952 #define SHELL_COOKED 4 // set term to cooked mode 953 #define SHELL_DOOUT 8 // redirecting output 954 #define SHELL_SILENT 16 // don't print error returned by command 955 #define SHELL_READ 32 // read lines and insert into buffer 956 #define SHELL_WRITE 64 // write lines from buffer 957 958 // Values returned by mch_nodetype() 959 #define NODE_NORMAL 0 // file or directory, check with mch_isdir() 960 #define NODE_WRITABLE 1 // something we can write to (character 961 // device, fifo, socket, ..) 962 #define NODE_OTHER 2 // non-writable thing (e.g., block device) 963 964 // Values for readfile() flags 965 #define READ_NEW 0x01 // read a file into a new buffer 966 #define READ_FILTER 0x02 // read filter output 967 #define READ_STDIN 0x04 // read from stdin 968 #define READ_BUFFER 0x08 // read from curbuf (converting stdin) 969 #define READ_DUMMY 0x10 // reading into a dummy buffer 970 #define READ_KEEP_UNDO 0x20 // keep undo info 971 #define READ_FIFO 0x40 // read from fifo or socket 972 973 // Values for change_indent() 974 #define INDENT_SET 1 // set indent 975 #define INDENT_INC 2 // increase indent 976 #define INDENT_DEC 3 // decrease indent 977 978 // Values for flags argument for findmatchlimit() 979 #define FM_BACKWARD 0x01 // search backwards 980 #define FM_FORWARD 0x02 // search forwards 981 #define FM_BLOCKSTOP 0x04 // stop at start/end of block 982 #define FM_SKIPCOMM 0x08 // skip comments 983 984 // Values for action argument for do_buffer() and close_buffer() 985 #define DOBUF_GOTO 0 // go to specified buffer 986 #define DOBUF_SPLIT 1 // split window and go to specified buffer 987 #define DOBUF_UNLOAD 2 // unload specified buffer(s) 988 #define DOBUF_DEL 3 // delete specified buffer(s) from buflist 989 #define DOBUF_WIPE 4 // delete specified buffer(s) really 990 #define DOBUF_WIPE_REUSE 5 // like DOBUF_WIPE an keep number for reuse 991 992 // Values for start argument for do_buffer() 993 #define DOBUF_CURRENT 0 // "count" buffer from current buffer 994 #define DOBUF_FIRST 1 // "count" buffer from first buffer 995 #define DOBUF_LAST 2 // "count" buffer from last buffer 996 #define DOBUF_MOD 3 // "count" mod. buffer from current buffer 997 998 // Values for flags argument of do_buffer() 999 #define DOBUF_FORCEIT 1 // :cmd! 1000 #define DOBUF_NOPOPUP 2 // skip popup window buffers 1001 1002 // Values for sub_cmd and which_pat argument for search_regcomp() 1003 // Also used for which_pat argument for searchit() 1004 #define RE_SEARCH 0 // save/use pat in/from search_pattern 1005 #define RE_SUBST 1 // save/use pat in/from subst_pattern 1006 #define RE_BOTH 2 // save pat in both patterns 1007 #define RE_LAST 2 // use last used pattern if "pat" is NULL 1008 1009 // Second argument for vim_regcomp(). 1010 #define RE_MAGIC 1 // 'magic' option 1011 #define RE_STRING 2 // match in string instead of buffer text 1012 #define RE_STRICT 4 // don't allow [abc] without ] 1013 #define RE_AUTO 8 // automatic engine selection 1014 1015 #ifdef FEAT_SYN_HL 1016 // values for reg_do_extmatch 1017 # define REX_SET 1 // to allow \z\(...\), 1018 # define REX_USE 2 // to allow \z\1 et al. 1019 # define REX_ALL (REX_SET | REX_USE) 1020 #endif 1021 1022 // Return values for fullpathcmp() 1023 // Note: can use (fullpathcmp() & FPC_SAME) to check for equal files 1024 #define FPC_SAME 1 // both exist and are the same file. 1025 #define FPC_DIFF 2 // both exist and are different files. 1026 #define FPC_NOTX 4 // both don't exist. 1027 #define FPC_DIFFX 6 // one of them doesn't exist. 1028 #define FPC_SAMEX 7 // both don't exist and file names are same. 1029 1030 // flags for do_ecmd() 1031 #define ECMD_HIDE 0x01 // don't free the current buffer 1032 #define ECMD_SET_HELP 0x02 // set b_help flag of (new) buffer before 1033 // opening file 1034 #define ECMD_OLDBUF 0x04 // use existing buffer if it exists 1035 #define ECMD_FORCEIT 0x08 // ! used in Ex command 1036 #define ECMD_ADDBUF 0x10 // don't edit, just add to buffer list 1037 #define ECMD_ALTBUF 0x20 // like ECMD_ADDBUF and set the alternate file 1038 1039 // for lnum argument in do_ecmd() 1040 #define ECMD_LASTL (linenr_T)0 // use last position in loaded file 1041 #define ECMD_LAST (linenr_T)-1 // use last position in all files 1042 #define ECMD_ONE (linenr_T)1 // use first line 1043 1044 // flags for do_cmdline() 1045 #define DOCMD_VERBOSE 0x01 // included command in error message 1046 #define DOCMD_NOWAIT 0x02 // don't call wait_return() and friends 1047 #define DOCMD_REPEAT 0x04 // repeat exec. until getline() returns NULL 1048 #define DOCMD_KEYTYPED 0x08 // don't reset KeyTyped 1049 #define DOCMD_EXCRESET 0x10 // reset exception environment (for debugging) 1050 #define DOCMD_KEEPLINE 0x20 // keep typed line for repeating with "." 1051 #define DOCMD_RANGEOK 0240 // can use a range without ":" in Vim9 script 1052 1053 // flags for beginline() 1054 #define BL_WHITE 1 // cursor on first non-white in the line 1055 #define BL_SOL 2 // use 'sol' option 1056 #define BL_FIX 4 // don't leave cursor on a NUL 1057 1058 // flags for mf_sync() 1059 #define MFS_ALL 1 // also sync blocks with negative numbers 1060 #define MFS_STOP 2 // stop syncing when a character is available 1061 #define MFS_FLUSH 4 // flushed file to disk 1062 #define MFS_ZERO 8 // only write block 0 1063 1064 // flags for buf_copy_options() 1065 #define BCO_ENTER 1 // going to enter the buffer 1066 #define BCO_ALWAYS 2 // always copy the options 1067 #define BCO_NOHELP 4 // don't touch the help related options 1068 1069 // flags for do_put() 1070 #define PUT_FIXINDENT 1 // make indent look nice 1071 #define PUT_CURSEND 2 // leave cursor after end of new text 1072 #define PUT_CURSLINE 4 // leave cursor on last line of new text 1073 #define PUT_LINE 8 // put register as lines 1074 #define PUT_LINE_SPLIT 16 // split line for linewise register 1075 #define PUT_LINE_FORWARD 32 // put linewise register below Visual sel. 1076 #define PUT_BLOCK_INNER 64 // in block mode, do not add trailing spaces 1077 1078 // flags for set_indent() 1079 #define SIN_CHANGED 1 // call changed_bytes() when line changed 1080 #define SIN_INSERT 2 // insert indent before existing text 1081 #define SIN_UNDO 4 // save line for undo before changing it 1082 1083 // flags for insertchar() 1084 #define INSCHAR_FORMAT 1 // force formatting 1085 #define INSCHAR_DO_COM 2 // format comments 1086 #define INSCHAR_CTRLV 4 // char typed just after CTRL-V 1087 #define INSCHAR_NO_FEX 8 // don't use 'formatexpr' 1088 #define INSCHAR_COM_LIST 16 // format comments with list/2nd line indent 1089 1090 // flags for open_line() 1091 #define OPENLINE_DELSPACES 1 // delete spaces after cursor 1092 #define OPENLINE_DO_COM 2 // format comments 1093 #define OPENLINE_KEEPTRAIL 4 // keep trailing spaces 1094 #define OPENLINE_MARKFIX 8 // fix mark positions 1095 #define OPENLINE_COM_LIST 16 // format comments with list/2nd line indent 1096 1097 // There are five history tables: 1098 #define HIST_CMD 0 // colon commands 1099 #define HIST_SEARCH 1 // search commands 1100 #define HIST_EXPR 2 // expressions (from entering = register) 1101 #define HIST_INPUT 3 // input() lines 1102 #define HIST_DEBUG 4 // debug commands 1103 #define HIST_COUNT 5 // number of history tables 1104 1105 // The type numbers are fixed for backwards compatibility. 1106 #define BARTYPE_VERSION 1 1107 #define BARTYPE_HISTORY 2 1108 #define BARTYPE_REGISTER 3 1109 #define BARTYPE_MARK 4 1110 1111 #define VIMINFO_VERSION 4 1112 #define VIMINFO_VERSION_WITH_HISTORY 2 1113 #define VIMINFO_VERSION_WITH_REGISTERS 3 1114 #define VIMINFO_VERSION_WITH_MARKS 4 1115 1116 /* 1117 * Values for do_tag(). 1118 */ 1119 #define DT_TAG 1 // jump to newer position or same tag again 1120 #define DT_POP 2 // jump to older position 1121 #define DT_NEXT 3 // jump to next match of same tag 1122 #define DT_PREV 4 // jump to previous match of same tag 1123 #define DT_FIRST 5 // jump to first match of same tag 1124 #define DT_LAST 6 // jump to first match of same tag 1125 #define DT_SELECT 7 // jump to selection from list 1126 #define DT_HELP 8 // like DT_TAG, but no wildcards 1127 #define DT_JUMP 9 // jump to new tag or selection from list 1128 #define DT_CSCOPE 10 // cscope find command (like tjump) 1129 #define DT_LTAG 11 // tag using location list 1130 #define DT_FREE 99 // free cached matches 1131 1132 /* 1133 * flags for find_tags(). 1134 */ 1135 #define TAG_HELP 1 // only search for help tags 1136 #define TAG_NAMES 2 // only return name of tag 1137 #define TAG_REGEXP 4 // use tag pattern as regexp 1138 #define TAG_NOIC 8 // don't always ignore case 1139 #ifdef FEAT_CSCOPE 1140 # define TAG_CSCOPE 16 // cscope tag 1141 #endif 1142 #define TAG_VERBOSE 32 // message verbosity 1143 #define TAG_INS_COMP 64 // Currently doing insert completion 1144 #define TAG_KEEP_LANG 128 // keep current language 1145 #define TAG_NO_TAGFUNC 256 // do not use 'tagfunc' 1146 1147 #define TAG_MANY 300 // When finding many tags (for completion), 1148 // find up to this many tags 1149 1150 /* 1151 * Types of dialogs passed to do_vim_dialog(). 1152 */ 1153 #define VIM_GENERIC 0 1154 #define VIM_ERROR 1 1155 #define VIM_WARNING 2 1156 #define VIM_INFO 3 1157 #define VIM_QUESTION 4 1158 #define VIM_LAST_TYPE 4 // sentinel value 1159 1160 /* 1161 * Return values for functions like gui_yesnocancel() 1162 */ 1163 #define VIM_YES 2 1164 #define VIM_NO 3 1165 #define VIM_CANCEL 4 1166 #define VIM_ALL 5 1167 #define VIM_DISCARDALL 6 1168 1169 /* 1170 * arguments for win_split() 1171 */ 1172 #define WSP_ROOM 1 // require enough room 1173 #define WSP_VERT 2 // split vertically 1174 #define WSP_TOP 4 // window at top-left of shell 1175 #define WSP_BOT 8 // window at bottom-right of shell 1176 #define WSP_HELP 16 // creating the help window 1177 #define WSP_BELOW 32 // put new window below/right 1178 #define WSP_ABOVE 64 // put new window above/left 1179 #define WSP_NEWLOC 128 // don't copy location list 1180 1181 /* 1182 * arguments for gui_set_shellsize() 1183 */ 1184 #define RESIZE_VERT 1 // resize vertically 1185 #define RESIZE_HOR 2 // resize horizontally 1186 #define RESIZE_BOTH 15 // resize in both directions 1187 1188 /* 1189 * flags for check_changed() 1190 */ 1191 #define CCGD_AW 1 // do autowrite if buffer was changed 1192 #define CCGD_MULTWIN 2 // check also when several wins for the buf 1193 #define CCGD_FORCEIT 4 // ! used 1194 #define CCGD_ALLBUF 8 // may write all buffers 1195 #define CCGD_EXCMD 16 // may suggest using ! 1196 1197 /* 1198 * "flags" values for option-setting functions. 1199 * When OPT_GLOBAL and OPT_LOCAL are both missing, set both local and global 1200 * values, get local value. 1201 */ 1202 #define OPT_FREE 0x01 // free old value if it was allocated 1203 #define OPT_GLOBAL 0x02 // use global value 1204 #define OPT_LOCAL 0x04 // use local value 1205 #define OPT_MODELINE 0x08 // option in modeline 1206 #define OPT_WINONLY 0x10 // only set window-local options 1207 #define OPT_NOWIN 0x20 // don't set window-local options 1208 #define OPT_ONECOLUMN 0x40 // list options one per line 1209 #define OPT_NO_REDRAW 0x80 // ignore redraw flags on option 1210 #define OPT_SKIPRTP 0x100 // "skiprtp" in 'sessionoptions' 1211 1212 // Magic chars used in confirm dialog strings 1213 #define DLG_BUTTON_SEP '\n' 1214 #define DLG_HOTKEY_CHAR '&' 1215 1216 // Values for "starting" 1217 #define NO_SCREEN 2 // no screen updating yet 1218 #define NO_BUFFERS 1 // not all buffers loaded yet 1219 // 0 not starting anymore 1220 1221 // Values for swap_exists_action: what to do when swap file already exists 1222 #define SEA_NONE 0 // don't use dialog 1223 #define SEA_DIALOG 1 // use dialog when possible 1224 #define SEA_QUIT 2 // quit editing the file 1225 #define SEA_RECOVER 3 // recover the file 1226 1227 /* 1228 * Minimal size for block 0 of a swap file. 1229 * NOTE: This depends on size of struct block0! It's not done with a sizeof(), 1230 * because struct block0 is defined in memline.c (Sorry). 1231 * The maximal block size is arbitrary. 1232 */ 1233 #define MIN_SWAP_PAGE_SIZE 1048 1234 #define MAX_SWAP_PAGE_SIZE 50000 1235 1236 // Special values for current_sctx.sc_sid. 1237 #define SID_MODELINE -1 // when using a modeline 1238 #define SID_CMDARG -2 // for "--cmd" argument 1239 #define SID_CARG -3 // for "-c" argument 1240 #define SID_ENV -4 // for sourcing environment variable 1241 #define SID_ERROR -5 // option was reset because of an error 1242 #define SID_NONE -6 // don't set scriptID 1243 #define SID_WINLAYOUT -7 // changing window size 1244 1245 /* 1246 * Events for autocommands. 1247 */ 1248 enum auto_event 1249 { 1250 EVENT_BUFADD = 0, // after adding a buffer to the buffer list 1251 EVENT_BUFDELETE, // deleting a buffer from the buffer list 1252 EVENT_BUFENTER, // after entering a buffer 1253 EVENT_BUFFILEPOST, // after renaming a buffer 1254 EVENT_BUFFILEPRE, // before renaming a buffer 1255 EVENT_BUFHIDDEN, // just after buffer becomes hidden 1256 EVENT_BUFLEAVE, // before leaving a buffer 1257 EVENT_BUFNEW, // after creating any buffer 1258 EVENT_BUFNEWFILE, // when creating a buffer for a new file 1259 EVENT_BUFREADCMD, // read buffer using command 1260 EVENT_BUFREADPOST, // after reading a buffer 1261 EVENT_BUFREADPRE, // before reading a buffer 1262 EVENT_BUFUNLOAD, // just before unloading a buffer 1263 EVENT_BUFWINENTER, // after showing a buffer in a window 1264 EVENT_BUFWINLEAVE, // just after buffer removed from window 1265 EVENT_BUFWIPEOUT, // just before really deleting a buffer 1266 EVENT_BUFWRITECMD, // write buffer using command 1267 EVENT_BUFWRITEPOST, // after writing a buffer 1268 EVENT_BUFWRITEPRE, // before writing a buffer 1269 EVENT_CMDLINECHANGED, // command line was modified 1270 EVENT_CMDLINEENTER, // after entering the command line 1271 EVENT_CMDLINELEAVE, // before leaving the command line 1272 EVENT_CMDUNDEFINED, // command undefined 1273 EVENT_CMDWINENTER, // after entering the cmdline window 1274 EVENT_CMDWINLEAVE, // before leaving the cmdline window 1275 EVENT_COLORSCHEME, // after loading a colorscheme 1276 EVENT_COLORSCHEMEPRE, // before loading a colorscheme 1277 EVENT_COMPLETECHANGED, // after completion popup menu changed 1278 EVENT_COMPLETEDONE, // after finishing insert complete 1279 EVENT_COMPLETEDONEPRE, // idem, before clearing info 1280 EVENT_CURSORHOLD, // cursor in same position for a while 1281 EVENT_CURSORHOLDI, // idem, in Insert mode 1282 EVENT_CURSORMOVED, // cursor was moved 1283 EVENT_CURSORMOVEDI, // cursor was moved in Insert mode 1284 EVENT_DIFFUPDATED, // after diffs were updated 1285 EVENT_DIRCHANGED, // after user changed directory 1286 EVENT_ENCODINGCHANGED, // after changing the 'encoding' option 1287 EVENT_EXITPRE, // before exiting 1288 EVENT_FILEAPPENDCMD, // append to a file using command 1289 EVENT_FILEAPPENDPOST, // after appending to a file 1290 EVENT_FILEAPPENDPRE, // before appending to a file 1291 EVENT_FILECHANGEDRO, // before first change to read-only file 1292 EVENT_FILECHANGEDSHELL, // after shell command that changed file 1293 EVENT_FILECHANGEDSHELLPOST, // after (not) reloading changed file 1294 EVENT_FILEREADCMD, // read from a file using command 1295 EVENT_FILEREADPOST, // after reading a file 1296 EVENT_FILEREADPRE, // before reading a file 1297 EVENT_FILETYPE, // new file type detected (user defined) 1298 EVENT_FILEWRITECMD, // write to a file using command 1299 EVENT_FILEWRITEPOST, // after writing a file 1300 EVENT_FILEWRITEPRE, // before writing a file 1301 EVENT_FILTERREADPOST, // after reading from a filter 1302 EVENT_FILTERREADPRE, // before reading from a filter 1303 EVENT_FILTERWRITEPOST, // after writing to a filter 1304 EVENT_FILTERWRITEPRE, // before writing to a filter 1305 EVENT_FOCUSGAINED, // got the focus 1306 EVENT_FOCUSLOST, // lost the focus to another app 1307 EVENT_FUNCUNDEFINED, // if calling a function which doesn't exist 1308 EVENT_GUIENTER, // after starting the GUI 1309 EVENT_GUIFAILED, // after starting the GUI failed 1310 EVENT_INSERTCHANGE, // when changing Insert/Replace mode 1311 EVENT_INSERTCHARPRE, // before inserting a char 1312 EVENT_INSERTENTER, // when entering Insert mode 1313 EVENT_INSERTLEAVEPRE, // just before leaving Insert mode 1314 EVENT_INSERTLEAVE, // just after leaving Insert mode 1315 EVENT_MENUPOPUP, // just before popup menu is displayed 1316 EVENT_OPTIONSET, // option was set 1317 EVENT_QUICKFIXCMDPOST, // after :make, :grep etc. 1318 EVENT_QUICKFIXCMDPRE, // before :make, :grep etc. 1319 EVENT_QUITPRE, // before :quit 1320 EVENT_REMOTEREPLY, // upon string reception from a remote vim 1321 EVENT_SAFESTATE, // going to wait for a character 1322 EVENT_SAFESTATEAGAIN, // still waiting for a character 1323 EVENT_SESSIONLOADPOST, // after loading a session file 1324 EVENT_SHELLCMDPOST, // after ":!cmd" 1325 EVENT_SHELLFILTERPOST, // after ":1,2!cmd", ":w !cmd", ":r !cmd". 1326 EVENT_SIGUSR1, // after the SIGUSR1 signal 1327 EVENT_SOURCECMD, // sourcing a Vim script using command 1328 EVENT_SOURCEPRE, // before sourcing a Vim script 1329 EVENT_SOURCEPOST, // after sourcing a Vim script 1330 EVENT_SPELLFILEMISSING, // spell file missing 1331 EVENT_STDINREADPOST, // after reading from stdin 1332 EVENT_STDINREADPRE, // before reading from stdin 1333 EVENT_SWAPEXISTS, // found existing swap file 1334 EVENT_SYNTAX, // syntax selected 1335 EVENT_TABCLOSED, // after closing a tab page 1336 EVENT_TABENTER, // after entering a tab page 1337 EVENT_TABLEAVE, // before leaving a tab page 1338 EVENT_TABNEW, // when entering a new tab page 1339 EVENT_TERMCHANGED, // after changing 'term' 1340 EVENT_TERMINALOPEN, // after a terminal buffer was created 1341 EVENT_TERMINALWINOPEN, // after a terminal buffer was created and 1342 // entering its window 1343 EVENT_TERMRESPONSE, // after setting "v:termresponse" 1344 EVENT_TEXTCHANGED, // text was modified not in Insert mode 1345 EVENT_TEXTCHANGEDI, // text was modified in Insert mode 1346 EVENT_TEXTCHANGEDP, // TextChangedI with popup menu visible 1347 EVENT_TEXTYANKPOST, // after some text was yanked 1348 EVENT_USER, // user defined autocommand 1349 EVENT_VIMENTER, // after starting Vim 1350 EVENT_VIMLEAVE, // before exiting Vim 1351 EVENT_VIMLEAVEPRE, // before exiting Vim and writing .viminfo 1352 EVENT_VIMRESIZED, // after Vim window was resized 1353 EVENT_WINENTER, // after entering a window 1354 EVENT_WINLEAVE, // before leaving a window 1355 EVENT_WINNEW, // when entering a new window 1356 EVENT_VIMSUSPEND, // before Vim is suspended 1357 EVENT_VIMRESUME, // after Vim is resumed 1358 1359 NUM_EVENTS // MUST be the last one 1360 }; 1361 1362 typedef enum auto_event event_T; 1363 1364 /* 1365 * Values for index in highlight_attr[]. 1366 * When making changes, also update HL_FLAGS below! And update the default 1367 * value of 'highlight' in option.c. 1368 */ 1369 typedef enum 1370 { 1371 HLF_8 = 0 // Meta & special keys listed with ":map", text that is 1372 // displayed different from what it is 1373 , HLF_EOB // after the last line in the buffer 1374 , HLF_AT // @ characters at end of screen, characters that 1375 // don't really exist in the text 1376 , HLF_D // directories in CTRL-D listing 1377 , HLF_E // error messages 1378 , HLF_H // obsolete, ignored 1379 , HLF_I // incremental search 1380 , HLF_L // last search string 1381 , HLF_M // "--More--" message 1382 , HLF_CM // Mode (e.g., "-- INSERT --") 1383 , HLF_N // line number for ":number" and ":#" commands 1384 , HLF_LNA // LineNrAbove 1385 , HLF_LNB // LineNrBelow 1386 , HLF_CLN // current line number 1387 , HLF_R // return to continue message and yes/no questions 1388 , HLF_S // status lines 1389 , HLF_SNC // status lines of not-current windows 1390 , HLF_C // column to separate vertically split windows 1391 , HLF_T // Titles for output from ":set all", ":autocmd" etc. 1392 , HLF_V // Visual mode 1393 , HLF_VNC // Visual mode, autoselecting and not clipboard owner 1394 , HLF_W // warning messages 1395 , HLF_WM // Wildmenu highlight 1396 , HLF_FL // Folded line 1397 , HLF_FC // Fold column 1398 , HLF_ADD // Added diff line 1399 , HLF_CHD // Changed diff line 1400 , HLF_DED // Deleted diff line 1401 , HLF_TXD // Text Changed in diff line 1402 , HLF_CONCEAL // Concealed text 1403 , HLF_SC // Sign column 1404 , HLF_SPB // SpellBad 1405 , HLF_SPC // SpellCap 1406 , HLF_SPR // SpellRare 1407 , HLF_SPL // SpellLocal 1408 , HLF_PNI // popup menu normal item 1409 , HLF_PSI // popup menu selected item 1410 , HLF_PSB // popup menu scrollbar 1411 , HLF_PST // popup menu scrollbar thumb 1412 , HLF_TP // tabpage line 1413 , HLF_TPS // tabpage line selected 1414 , HLF_TPF // tabpage line filler 1415 , HLF_CUC // 'cursorcolumn' 1416 , HLF_CUL // 'cursorline' 1417 , HLF_MC // 'colorcolumn' 1418 , HLF_QFL // quickfix window line currently selected 1419 , HLF_ST // status lines of terminal windows 1420 , HLF_STNC // status lines of not-current terminal windows 1421 , HLF_COUNT // MUST be the last one 1422 } hlf_T; 1423 1424 // The HL_FLAGS must be in the same order as the HLF_ enums! 1425 // When changing this also adjust the default for 'highlight'. 1426 #define HL_FLAGS {'8', '~', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \ 1427 'n', 'a', 'b', 'N', 'r', 's', 'S', 'c', 't', 'v', 'V', \ 1428 'w', 'W', 'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \ 1429 'B', 'P', 'R', 'L', \ 1430 '+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o', 'q', \ 1431 'z', 'Z'} 1432 1433 /* 1434 * Boolean constants 1435 */ 1436 #ifndef TRUE 1437 # define FALSE 0 // note: this is an int, not a long! 1438 # define TRUE 1 1439 #endif 1440 1441 #define MAYBE 2 // sometimes used for a variant on TRUE 1442 1443 #ifndef UINT32_T 1444 typedef UINT32_TYPEDEF UINT32_T; 1445 #endif 1446 1447 /* 1448 * Operator IDs; The order must correspond to opchars[] in ops.c! 1449 */ 1450 #define OP_NOP 0 // no pending operation 1451 #define OP_DELETE 1 // "d" delete operator 1452 #define OP_YANK 2 // "y" yank operator 1453 #define OP_CHANGE 3 // "c" change operator 1454 #define OP_LSHIFT 4 // "<" left shift operator 1455 #define OP_RSHIFT 5 // ">" right shift operator 1456 #define OP_FILTER 6 // "!" filter operator 1457 #define OP_TILDE 7 // "g~" switch case operator 1458 #define OP_INDENT 8 // "=" indent operator 1459 #define OP_FORMAT 9 // "gq" format operator 1460 #define OP_COLON 10 // ":" colon operator 1461 #define OP_UPPER 11 // "gU" make upper case operator 1462 #define OP_LOWER 12 // "gu" make lower case operator 1463 #define OP_JOIN 13 // "J" join operator, only for Visual mode 1464 #define OP_JOIN_NS 14 // "gJ" join operator, only for Visual mode 1465 #define OP_ROT13 15 // "g?" rot-13 encoding 1466 #define OP_REPLACE 16 // "r" replace chars, only for Visual mode 1467 #define OP_INSERT 17 // "I" Insert column, only for Visual mode 1468 #define OP_APPEND 18 // "A" Append column, only for Visual mode 1469 #define OP_FOLD 19 // "zf" define a fold 1470 #define OP_FOLDOPEN 20 // "zo" open folds 1471 #define OP_FOLDOPENREC 21 // "zO" open folds recursively 1472 #define OP_FOLDCLOSE 22 // "zc" close folds 1473 #define OP_FOLDCLOSEREC 23 // "zC" close folds recursively 1474 #define OP_FOLDDEL 24 // "zd" delete folds 1475 #define OP_FOLDDELREC 25 // "zD" delete folds recursively 1476 #define OP_FORMAT2 26 // "gw" format operator, keeps cursor pos 1477 #define OP_FUNCTION 27 // "g@" call 'operatorfunc' 1478 #define OP_NR_ADD 28 // "<C-A>" Add to the number or alphabetic 1479 // character (OP_ADD conflicts with Perl) 1480 #define OP_NR_SUB 29 // "<C-X>" Subtract from the number or 1481 // alphabetic character 1482 1483 /* 1484 * Motion types, used for operators and for yank/delete registers. 1485 */ 1486 #define MCHAR 0 // character-wise movement/register 1487 #define MLINE 1 // line-wise movement/register 1488 #define MBLOCK 2 // block-wise register 1489 1490 #define MAUTO 0xff // Decide between MLINE/MCHAR 1491 1492 /* 1493 * Minimum screen size 1494 */ 1495 #define MIN_COLUMNS 12 // minimal columns for screen 1496 #define MIN_LINES 2 // minimal lines for screen 1497 #define STATUS_HEIGHT 1 // height of a status line under a window 1498 #ifdef FEAT_MENU // height of a status line under a window 1499 # define WINBAR_HEIGHT(wp) (wp)->w_winbar_height 1500 # define VISIBLE_HEIGHT(wp) ((wp)->w_height + (wp)->w_winbar_height) 1501 #else 1502 # define WINBAR_HEIGHT(wp) 0 1503 # define VISIBLE_HEIGHT(wp) (wp)->w_height 1504 #endif 1505 #define QF_WINHEIGHT 10 // default height for quickfix window 1506 1507 /* 1508 * Buffer sizes 1509 */ 1510 #ifndef CMDBUFFSIZE 1511 # define CMDBUFFSIZE 256 // size of the command processing buffer 1512 #endif 1513 1514 #define LSIZE 512 // max. size of a line in the tags file 1515 1516 #define IOSIZE (1024+1) // file i/o and sprintf buffer size 1517 1518 #define DIALOG_MSG_SIZE 1000 // buffer size for dialog_msg() 1519 1520 #define MSG_BUF_LEN 480 // length of buffer for small messages 1521 #define MSG_BUF_CLEN (MSG_BUF_LEN / 6) // cell length (worst case: utf-8 1522 // takes 6 bytes for one cell) 1523 1524 #define FOLD_TEXT_LEN 51 // buffer size for get_foldtext() 1525 1526 // Size of the buffer used for tgetent(). Unfortunately this is largely 1527 // undocumented, some systems use 1024. Using a buffer that is too small 1528 // causes a buffer overrun and a crash. Use the maximum known value to stay 1529 // on the safe side. 1530 #define TBUFSZ 2048 // buffer size for termcap entry 1531 1532 /* 1533 * Maximum length of key sequence to be mapped. 1534 * Must be able to hold an Amiga resize report. 1535 */ 1536 #define MAXMAPLEN 50 1537 1538 // Size in bytes of the hash used in the undo file. 1539 #define UNDO_HASH_SIZE 32 1540 1541 #ifdef HAVE_FCNTL_H 1542 # include <fcntl.h> 1543 #endif 1544 1545 #ifdef BINARY_FILE_IO 1546 # define WRITEBIN "wb" // no CR-LF translation 1547 # define READBIN "rb" 1548 # define APPENDBIN "ab" 1549 #else 1550 # define WRITEBIN "w" 1551 # define READBIN "r" 1552 # define APPENDBIN "a" 1553 #endif 1554 1555 /* 1556 * EMX doesn't have a global way of making open() use binary I/O. 1557 * Use O_BINARY for all open() calls. 1558 */ 1559 #if defined(__CYGWIN32__) 1560 # define O_EXTRA O_BINARY 1561 #else 1562 # define O_EXTRA 0 1563 #endif 1564 1565 #ifndef O_NOFOLLOW 1566 # define O_NOFOLLOW 0 1567 #endif 1568 1569 #ifndef W_OK 1570 # define W_OK 2 // for systems that don't have W_OK in unistd.h 1571 #endif 1572 #ifndef R_OK 1573 # define R_OK 4 // for systems that don't have R_OK in unistd.h 1574 #endif 1575 1576 // Allocate memory for one type and cast the returned pointer to have the 1577 // compiler check the types. 1578 #define ALLOC_ONE(type) (type *)alloc(sizeof(type)) 1579 #define ALLOC_MULT(type, count) (type *)alloc(sizeof(type) * (count)) 1580 #define ALLOC_CLEAR_ONE(type) (type *)alloc_clear(sizeof(type)) 1581 #define ALLOC_CLEAR_MULT(type, count) (type *)alloc_clear(sizeof(type) * (count)) 1582 #define LALLOC_CLEAR_ONE(type) (type *)lalloc_clear(sizeof(type), FALSE) 1583 #define LALLOC_CLEAR_MULT(type, count) (type *)lalloc_clear(sizeof(type) * (count), FALSE) 1584 #define LALLOC_MULT(type, count) (type *)lalloc(sizeof(type) * (count), FALSE) 1585 1586 #ifdef HAVE_MEMSET 1587 # define vim_memset(ptr, c, size) memset((ptr), (c), (size)) 1588 #else 1589 void *vim_memset(void *, int, size_t); 1590 #endif 1591 #define CLEAR_FIELD(field) vim_memset(&(field), 0, sizeof(field)) 1592 #define CLEAR_POINTER(ptr) vim_memset((ptr), 0, sizeof(*(ptr))) 1593 1594 /* 1595 * defines to avoid typecasts from (char_u *) to (char *) and back 1596 * (vim_strchr() and vim_strrchr() are now in alloc.c) 1597 */ 1598 #define STRLEN(s) strlen((char *)(s)) 1599 #define STRCPY(d, s) strcpy((char *)(d), (char *)(s)) 1600 #define STRNCPY(d, s, n) strncpy((char *)(d), (char *)(s), (size_t)(n)) 1601 #define STRCMP(d, s) strcmp((char *)(d), (char *)(s)) 1602 #define STRNCMP(d, s, n) strncmp((char *)(d), (char *)(s), (size_t)(n)) 1603 #ifdef HAVE_STRCASECMP 1604 # define STRICMP(d, s) strcasecmp((char *)(d), (char *)(s)) 1605 #else 1606 # ifdef HAVE_STRICMP 1607 # define STRICMP(d, s) stricmp((char *)(d), (char *)(s)) 1608 # else 1609 # define STRICMP(d, s) vim_stricmp((char *)(d), (char *)(s)) 1610 # endif 1611 #endif 1612 #ifdef HAVE_STRCOLL 1613 # define STRCOLL(d, s) strcoll((char *)(d), (char *)(s)) 1614 #else 1615 # define STRCOLL(d, s) strcmp((char *)(d), (char *)(s)) 1616 #endif 1617 1618 // Like strcpy() but allows overlapped source and destination. 1619 #define STRMOVE(d, s) mch_memmove((d), (s), STRLEN(s) + 1) 1620 1621 #ifdef HAVE_STRNCASECMP 1622 # define STRNICMP(d, s, n) strncasecmp((char *)(d), (char *)(s), (size_t)(n)) 1623 #else 1624 # ifdef HAVE_STRNICMP 1625 # define STRNICMP(d, s, n) strnicmp((char *)(d), (char *)(s), (size_t)(n)) 1626 # else 1627 # define STRNICMP(d, s, n) vim_strnicmp((char *)(d), (char *)(s), (size_t)(n)) 1628 # endif 1629 #endif 1630 1631 // We need to call mb_stricmp() even when we aren't dealing with a multi-byte 1632 // encoding because mb_stricmp() takes care of all ascii and non-ascii 1633 // encodings, including characters with umlauts in latin1, etc., while 1634 // STRICMP() only handles the system locale version, which often does not 1635 // handle non-ascii properly. 1636 1637 # define MB_STRICMP(d, s) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)MAXCOL) 1638 # define MB_STRNICMP(d, s, n) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)(n)) 1639 1640 #define STRCAT(d, s) strcat((char *)(d), (char *)(s)) 1641 #define STRNCAT(d, s, n) strncat((char *)(d), (char *)(s), (size_t)(n)) 1642 1643 #ifdef HAVE_STRPBRK 1644 # define vim_strpbrk(s, cs) (char_u *)strpbrk((char *)(s), (char *)(cs)) 1645 #endif 1646 1647 #define OUT_STR(s) out_str((char_u *)(s)) 1648 #define OUT_STR_NF(s) out_str_nf((char_u *)(s)) 1649 1650 #ifdef FEAT_GUI 1651 # ifdef FEAT_TERMGUICOLORS 1652 # define GUI_FUNCTION(f) (gui.in_use ? gui_##f : termgui_##f) 1653 # define GUI_FUNCTION2(f, pixel) (gui.in_use \ 1654 ? ((pixel) != INVALCOLOR \ 1655 ? gui_##f((pixel)) \ 1656 : INVALCOLOR) \ 1657 : termgui_##f((pixel))) 1658 # define USE_24BIT (gui.in_use || p_tgc) 1659 # else 1660 # define GUI_FUNCTION(f) gui_##f 1661 # define GUI_FUNCTION2(f,pixel) ((pixel) != INVALCOLOR \ 1662 ? gui_##f((pixel)) \ 1663 : INVALCOLOR) 1664 # define USE_24BIT gui.in_use 1665 # endif 1666 #else 1667 # ifdef FEAT_TERMGUICOLORS 1668 # define GUI_FUNCTION(f) termgui_##f 1669 # define GUI_FUNCTION2(f, pixel) termgui_##f((pixel)) 1670 # define USE_24BIT p_tgc 1671 # endif 1672 #endif 1673 #ifdef FEAT_TERMGUICOLORS 1674 # define IS_CTERM (t_colors > 1 || p_tgc) 1675 #else 1676 # define IS_CTERM (t_colors > 1) 1677 #endif 1678 #ifdef GUI_FUNCTION 1679 # define GUI_MCH_GET_RGB GUI_FUNCTION(mch_get_rgb) 1680 # define GUI_MCH_GET_RGB2(pixel) GUI_FUNCTION2(mch_get_rgb, (pixel)) 1681 # define GUI_MCH_GET_COLOR GUI_FUNCTION(mch_get_color) 1682 # define GUI_GET_COLOR GUI_FUNCTION(get_color) 1683 #endif 1684 1685 // Prefer using emsgf(), because perror() may send the output to the wrong 1686 // destination and mess up the screen. 1687 #ifdef HAVE_STRERROR 1688 # define PERROR(msg) (void)semsg("%s: %s", (char *)msg, strerror(errno)) 1689 #else 1690 # define PERROR(msg) do_perror(msg) 1691 #endif 1692 1693 typedef long linenr_T; // line number type 1694 typedef int colnr_T; // column number type 1695 typedef unsigned short disptick_T; // display tick type 1696 1697 /* 1698 * Well, you won't believe it, but some S/390 machines ("host", now also known 1699 * as zServer) use 31 bit pointers. There are also some newer machines, that 1700 * use 64 bit pointers. I don't know how to distinguish between 31 and 64 bit 1701 * machines, so the best way is to assume 31 bits whenever we detect OS/390 1702 * Unix. 1703 * With this we restrict the maximum line length to 1073741823. I guess this is 1704 * not a real problem. BTW: Longer lines are split. 1705 */ 1706 #ifdef __MVS__ 1707 # define MAXCOL (0x3fffffffL) // maximum column number, 30 bits 1708 # define MAXLNUM (0x3fffffffL) // maximum (invalid) line number 1709 #else 1710 # define MAXCOL INT_MAX // maximum column number 1711 # define MAXLNUM LONG_MAX // maximum (invalid) line number 1712 #endif 1713 1714 #define SHOWCMD_COLS 10 // columns needed by shown command 1715 1716 typedef void *vim_acl_T; // dummy to pass an ACL to a function 1717 1718 #ifndef mch_memmove 1719 # define mch_memmove(to, from, len) memmove((char*)(to), (char*)(from), (size_t)(len)) 1720 #endif 1721 1722 /* 1723 * fnamecmp() is used to compare file names. 1724 * On some systems case in a file name does not matter, on others it does. 1725 * (this does not account for maximum name lengths and things like "../dir", 1726 * thus it is not 100% accurate!) 1727 */ 1728 #define fnamecmp(x, y) vim_fnamecmp((char_u *)(x), (char_u *)(y)) 1729 #define fnamencmp(x, y, n) vim_fnamencmp((char_u *)(x), (char_u *)(y), (size_t)(n)) 1730 1731 #if defined(UNIX) || defined(FEAT_GUI) || defined(VMS) \ 1732 || defined(FEAT_CLIENTSERVER) 1733 # define USE_INPUT_BUF 1734 #endif 1735 1736 #ifndef EINTR 1737 # define read_eintr(fd, buf, count) vim_read((fd), (buf), (count)) 1738 # define write_eintr(fd, buf, count) vim_write((fd), (buf), (count)) 1739 #endif 1740 1741 #ifdef MSWIN 1742 // On MS-Windows the third argument isn't size_t. This matters for Win64, 1743 // where sizeof(size_t)==8, not 4 1744 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (unsigned int)(count)) 1745 # define vim_write(fd, buf, count) write((fd), (char *)(buf), (unsigned int)(count)) 1746 #else 1747 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (size_t) (count)) 1748 # define vim_write(fd, buf, count) write((fd), (char *)(buf), (size_t) (count)) 1749 #endif 1750 1751 /* 1752 * Enums need a typecast to be used as array index (for Ultrix). 1753 */ 1754 #define HL_ATTR(n) highlight_attr[(int)(n)] 1755 #define TERM_STR(n) term_strings[(int)(n)] 1756 1757 /* 1758 * EXTERN is only defined in main.c. That's where global variables are 1759 * actually defined and initialized. 1760 */ 1761 #ifndef EXTERN 1762 # define EXTERN extern 1763 # define INIT(x) 1764 # define INIT2(a, b) 1765 # define INIT3(a, b, c) 1766 # define INIT4(a, b, c, d) 1767 # define INIT5(a, b, c, d, e) 1768 # define INIT6(a, b, c, d, e, f) 1769 #else 1770 # ifndef INIT 1771 # define INIT(x) x 1772 # define INIT2(a, b) = {a, b} 1773 # define INIT3(a, b, c) = {a, b, c} 1774 # define INIT4(a, b, c, d) = {a, b, c, d} 1775 # define INIT5(a, b, c, d, e) = {a, b, c, d, e} 1776 # define INIT6(a, b, c, d, e, f) = {a, b, c, d, e, f} 1777 # define DO_INIT 1778 # endif 1779 #endif 1780 1781 #define MAX_MCO 6 // maximum value for 'maxcombine' 1782 1783 // Maximum number of bytes in a multi-byte character. It can be one 32-bit 1784 // character of up to 6 bytes, or one 16-bit character of up to three bytes 1785 // plus six following composing characters of three bytes each. 1786 #define MB_MAXBYTES 21 1787 1788 #if (defined(FEAT_PROFILE) || defined(FEAT_RELTIME)) && !defined(PROTO) 1789 # ifdef MSWIN 1790 typedef LARGE_INTEGER proftime_T; 1791 # else 1792 typedef struct timeval proftime_T; 1793 # endif 1794 #else 1795 typedef int proftime_T; // dummy for function prototypes 1796 #endif 1797 1798 // Type of compilation passed to compile_def_function() 1799 typedef enum { 1800 CT_NONE, // use df_instr 1801 CT_PROFILE, // use df_instr_prof 1802 CT_DEBUG // use df_instr_debug, overrules CT_PROFILE 1803 } compiletype_T; 1804 1805 // Keep in sync with INSTRUCTIONS(). 1806 #ifdef FEAT_PROFILE 1807 # define COMPILE_TYPE(ufunc) (debug_break_level > 0 || ufunc->uf_has_breakpoint ? CT_DEBUG : do_profiling == PROF_YES && (ufunc)->uf_profiling ? CT_PROFILE : CT_NONE) 1808 #else 1809 # define COMPILE_TYPE(ufunc) debug_break_level > 0 || ufunc->uf_has_breakpoint ? CT_DEBUG : CT_NONE 1810 #endif 1811 1812 /* 1813 * When compiling with 32 bit Perl time_t is 32 bits in the Perl code but 64 1814 * bits elsewhere. That causes memory corruption. Define time_T and use it 1815 * for global variables to avoid that. 1816 */ 1817 #ifdef PROTO 1818 typedef long time_T; 1819 #else 1820 # ifdef MSWIN 1821 typedef __time64_t time_T; 1822 # else 1823 typedef time_t time_T; 1824 # endif 1825 #endif 1826 1827 #ifdef _WIN64 1828 typedef __int64 sock_T; 1829 #else 1830 typedef int sock_T; 1831 #endif 1832 1833 // Include option.h before structs.h, because the number of window-local and 1834 // buffer-local options is used there. 1835 #include "option.h" // options and default values 1836 1837 #include "beval.h" // BalloonEval 1838 1839 // Note that gui.h is included by structs.h 1840 1841 #include "structs.h" // defines many structures 1842 1843 #include "alloc.h" 1844 1845 // Values for "do_profiling". 1846 #define PROF_NONE 0 // profiling not started 1847 #define PROF_YES 1 // profiling busy 1848 #define PROF_PAUSED 2 // profiling paused 1849 1850 1851 // Codes for mouse button events in lower three bits: 1852 #define MOUSE_LEFT 0x00 1853 #define MOUSE_MIDDLE 0x01 1854 #define MOUSE_RIGHT 0x02 1855 #define MOUSE_RELEASE 0x03 1856 1857 // bit masks for modifiers: 1858 #define MOUSE_SHIFT 0x04 1859 #define MOUSE_ALT 0x08 1860 #define MOUSE_CTRL 0x10 1861 1862 // mouse buttons that are handled like a key press (GUI only) 1863 // Note that the scroll wheel keys are inverted: MOUSE_5 scrolls lines up but 1864 // the result of this is that the window moves down, similarly MOUSE_6 scrolls 1865 // columns left but the window moves right. 1866 #define MOUSE_4 0x100 // scroll wheel down 1867 #define MOUSE_5 0x200 // scroll wheel up 1868 1869 #define MOUSE_X1 0x300 // Mouse-button X1 (6th) 1870 #define MOUSE_X2 0x400 // Mouse-button X2 1871 1872 #define MOUSE_6 0x500 // scroll wheel left 1873 #define MOUSE_7 0x600 // scroll wheel right 1874 1875 #define MOUSE_MOVE 0x700 // report mouse moved 1876 1877 // 0x20 is reserved by xterm 1878 #define MOUSE_DRAG_XTERM 0x40 1879 1880 #define MOUSE_DRAG (0x40 | MOUSE_RELEASE) 1881 1882 // Lowest button code for using the mouse wheel (xterm only) 1883 #define MOUSEWHEEL_LOW 0x60 1884 1885 #define MOUSE_CLICK_MASK 0x03 1886 1887 #define NUM_MOUSE_CLICKS(code) \ 1888 (((unsigned)((code) & 0xC0) >> 6) + 1) 1889 1890 #define SET_NUM_MOUSE_CLICKS(code, num) \ 1891 (code) = ((code) & 0x3f) | ((((num) - 1) & 3) << 6) 1892 1893 // Added to mouse column for GUI when 'mousefocus' wants to give focus to a 1894 // window by simulating a click on its status line. We could use up to 128 * 1895 // 128 = 16384 columns, now it's reduced to 10000. 1896 #define MOUSE_COLOFF 10000 1897 1898 /* 1899 * jump_to_mouse() returns one of first four these values, possibly with 1900 * some of the other three added. 1901 */ 1902 #define IN_UNKNOWN 0 1903 #define IN_BUFFER 1 1904 #define IN_STATUS_LINE 2 // on status or command line 1905 #define IN_SEP_LINE 4 // on vertical separator line 1906 #define IN_OTHER_WIN 8 // in other window but can't go there 1907 #define CURSOR_MOVED 0x100 1908 #define MOUSE_FOLD_CLOSE 0x200 // clicked on '-' in fold column 1909 #define MOUSE_FOLD_OPEN 0x400 // clicked on '+' in fold column 1910 #define MOUSE_WINBAR 0x800 // in window toolbar 1911 1912 // flags for jump_to_mouse() 1913 #define MOUSE_FOCUS 0x01 // need to stay in this window 1914 #define MOUSE_MAY_VIS 0x02 // may start Visual mode 1915 #define MOUSE_DID_MOVE 0x04 // only act when mouse has moved 1916 #define MOUSE_SETPOS 0x08 // only set current mouse position 1917 #define MOUSE_MAY_STOP_VIS 0x10 // may stop Visual mode 1918 #define MOUSE_RELEASED 0x20 // button was released 1919 1920 #if defined(UNIX) && defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) 1921 # define CHECK_DOUBLE_CLICK 1 // Checking for double clicks ourselves. 1922 #endif 1923 1924 1925 // defines for eval_vars() 1926 #define VALID_PATH 1 1927 #define VALID_HEAD 2 1928 1929 // Defines for Vim variables. These must match vimvars[] in evalvars.c! 1930 #define VV_COUNT 0 1931 #define VV_COUNT1 1 1932 #define VV_PREVCOUNT 2 1933 #define VV_ERRMSG 3 1934 #define VV_WARNINGMSG 4 1935 #define VV_STATUSMSG 5 1936 #define VV_SHELL_ERROR 6 1937 #define VV_THIS_SESSION 7 1938 #define VV_VERSION 8 1939 #define VV_LNUM 9 1940 #define VV_TERMRESPONSE 10 1941 #define VV_FNAME 11 1942 #define VV_LANG 12 1943 #define VV_LC_TIME 13 1944 #define VV_CTYPE 14 1945 #define VV_CC_FROM 15 1946 #define VV_CC_TO 16 1947 #define VV_FNAME_IN 17 1948 #define VV_FNAME_OUT 18 1949 #define VV_FNAME_NEW 19 1950 #define VV_FNAME_DIFF 20 1951 #define VV_CMDARG 21 1952 #define VV_FOLDSTART 22 1953 #define VV_FOLDEND 23 1954 #define VV_FOLDDASHES 24 1955 #define VV_FOLDLEVEL 25 1956 #define VV_PROGNAME 26 1957 #define VV_SEND_SERVER 27 1958 #define VV_DYING 28 1959 #define VV_EXCEPTION 29 1960 #define VV_THROWPOINT 30 1961 #define VV_REG 31 1962 #define VV_CMDBANG 32 1963 #define VV_INSERTMODE 33 1964 #define VV_VAL 34 1965 #define VV_KEY 35 1966 #define VV_PROFILING 36 1967 #define VV_FCS_REASON 37 1968 #define VV_FCS_CHOICE 38 1969 #define VV_BEVAL_BUFNR 39 1970 #define VV_BEVAL_WINNR 40 1971 #define VV_BEVAL_WINID 41 1972 #define VV_BEVAL_LNUM 42 1973 #define VV_BEVAL_COL 43 1974 #define VV_BEVAL_TEXT 44 1975 #define VV_SCROLLSTART 45 1976 #define VV_SWAPNAME 46 1977 #define VV_SWAPCHOICE 47 1978 #define VV_SWAPCOMMAND 48 1979 #define VV_CHAR 49 1980 #define VV_MOUSE_WIN 50 1981 #define VV_MOUSE_WINID 51 1982 #define VV_MOUSE_LNUM 52 1983 #define VV_MOUSE_COL 53 1984 #define VV_OP 54 1985 #define VV_SEARCHFORWARD 55 1986 #define VV_HLSEARCH 56 1987 #define VV_OLDFILES 57 1988 #define VV_WINDOWID 58 1989 #define VV_PROGPATH 59 1990 #define VV_COMPLETED_ITEM 60 1991 #define VV_OPTION_NEW 61 1992 #define VV_OPTION_OLD 62 1993 #define VV_OPTION_OLDLOCAL 63 1994 #define VV_OPTION_OLDGLOBAL 64 1995 #define VV_OPTION_COMMAND 65 1996 #define VV_OPTION_TYPE 66 1997 #define VV_ERRORS 67 1998 #define VV_FALSE 68 1999 #define VV_TRUE 69 2000 #define VV_NONE 70 2001 #define VV_NULL 71 2002 #define VV_NUMBERMAX 72 2003 #define VV_NUMBERMIN 73 2004 #define VV_NUMBERSIZE 74 2005 #define VV_VIM_DID_ENTER 75 2006 #define VV_TESTING 76 2007 #define VV_TYPE_NUMBER 77 2008 #define VV_TYPE_STRING 78 2009 #define VV_TYPE_FUNC 79 2010 #define VV_TYPE_LIST 80 2011 #define VV_TYPE_DICT 81 2012 #define VV_TYPE_FLOAT 82 2013 #define VV_TYPE_BOOL 83 2014 #define VV_TYPE_NONE 84 2015 #define VV_TYPE_JOB 85 2016 #define VV_TYPE_CHANNEL 86 2017 #define VV_TYPE_BLOB 87 2018 #define VV_TERMRFGRESP 88 2019 #define VV_TERMRBGRESP 89 2020 #define VV_TERMU7RESP 90 2021 #define VV_TERMSTYLERESP 91 2022 #define VV_TERMBLINKRESP 92 2023 #define VV_EVENT 93 2024 #define VV_VERSIONLONG 94 2025 #define VV_ECHOSPACE 95 2026 #define VV_ARGV 96 2027 #define VV_COLLATE 97 2028 #define VV_EXITING 98 2029 #define VV_LEN 99 // number of v: vars 2030 2031 // used for v_number in VAR_BOOL and VAR_SPECIAL 2032 #define VVAL_FALSE 0L // VAR_BOOL 2033 #define VVAL_TRUE 1L // VAR_BOOL 2034 #define VVAL_NONE 2L // VAR_SPECIAL 2035 #define VVAL_NULL 3L // VAR_SPECIAL 2036 2037 // Type values for type(). 2038 #define VAR_TYPE_NUMBER 0 2039 #define VAR_TYPE_STRING 1 2040 #define VAR_TYPE_FUNC 2 2041 #define VAR_TYPE_LIST 3 2042 #define VAR_TYPE_DICT 4 2043 #define VAR_TYPE_FLOAT 5 2044 #define VAR_TYPE_BOOL 6 2045 #define VAR_TYPE_NONE 7 2046 #define VAR_TYPE_JOB 8 2047 #define VAR_TYPE_CHANNEL 9 2048 #define VAR_TYPE_BLOB 10 2049 #define VAR_TYPE_INSTR 11 2050 2051 #define DICT_MAXNEST 100 // maximum nesting of lists and dicts 2052 2053 #ifdef FEAT_CLIPBOARD 2054 2055 // VIM_ATOM_NAME is the older Vim-specific selection type for X11. Still 2056 // supported for when a mix of Vim versions is used. VIMENC_ATOM_NAME includes 2057 // the encoding to support Vims using different 'encoding' values. 2058 # define VIM_ATOM_NAME "_VIM_TEXT" 2059 # define VIMENC_ATOM_NAME "_VIMENC_TEXT" 2060 2061 // Selection states for modeless selection 2062 # define SELECT_CLEARED 0 2063 # define SELECT_IN_PROGRESS 1 2064 # define SELECT_DONE 2 2065 2066 # define SELECT_MODE_CHAR 0 2067 # define SELECT_MODE_WORD 1 2068 # define SELECT_MODE_LINE 2 2069 2070 # ifdef FEAT_GUI_MSWIN 2071 # ifdef FEAT_OLE 2072 # define WM_OLE (WM_APP+0) 2073 # endif 2074 # endif 2075 2076 // Info about selected text 2077 typedef struct 2078 { 2079 int available; // Is clipboard available? 2080 int owned; // Flag: do we own the selection? 2081 pos_T start; // Start of selected area 2082 pos_T end; // End of selected area 2083 int vmode; // Visual mode character 2084 2085 // Fields for selection that doesn't use Visual mode 2086 short_u origin_row; 2087 short_u origin_start_col; 2088 short_u origin_end_col; 2089 short_u word_start_col; 2090 short_u word_end_col; 2091 #ifdef FEAT_PROP_POPUP 2092 // limits for selection inside a popup window 2093 short_u min_col; 2094 short_u max_col; 2095 short_u min_row; 2096 short_u max_row; 2097 #endif 2098 2099 pos_T prev; // Previous position 2100 short_u state; // Current selection state 2101 short_u mode; // Select by char, word, or line. 2102 2103 # if defined(FEAT_GUI_X11) || defined(FEAT_XCLIPBOARD) 2104 Atom sel_atom; // PRIMARY/CLIPBOARD selection ID 2105 # endif 2106 2107 # ifdef FEAT_GUI_GTK 2108 GdkAtom gtk_sel_atom; // PRIMARY/CLIPBOARD selection ID 2109 # endif 2110 2111 # if defined(MSWIN) || defined(FEAT_CYGWIN_WIN32_CLIPBOARD) 2112 int_u format; // Vim's own special clipboard format 2113 int_u format_raw; // Vim's raw text clipboard format 2114 # endif 2115 # ifdef FEAT_GUI_HAIKU 2116 // No clipboard at the moment. TODO? 2117 # endif 2118 } Clipboard_T; 2119 #else 2120 typedef int Clipboard_T; // This is required for the prototypes. 2121 #endif 2122 2123 // Use 64-bit stat structure if available. 2124 #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) 2125 # define HAVE_STAT64 2126 typedef struct _stat64 stat_T; 2127 #else 2128 typedef struct stat stat_T; 2129 #endif 2130 2131 #if defined(__GNUC__) && !defined(__MINGW32__) 2132 # define USE_PRINTF_FORMAT_ATTRIBUTE 2133 #endif 2134 2135 typedef enum { 2136 ASSERT_EQUAL, 2137 ASSERT_NOTEQUAL, 2138 ASSERT_MATCH, 2139 ASSERT_NOTMATCH, 2140 ASSERT_OTHER 2141 } assert_type_T; 2142 2143 // Mode for bracketed_paste(). 2144 typedef enum { 2145 PASTE_INSERT, // insert mode 2146 PASTE_CMDLINE, // command line 2147 PASTE_EX, // ex mode line 2148 PASTE_ONE_CHAR // return first character 2149 } paste_mode_T; 2150 2151 // Argument for flush_buffers(). 2152 typedef enum { 2153 FLUSH_MINIMAL, 2154 FLUSH_TYPEAHEAD, // flush current typebuf contents 2155 FLUSH_INPUT // flush typebuf and inchar() input 2156 } flush_buffers_T; 2157 2158 // Argument for prepare_tagpreview() 2159 typedef enum { 2160 USEPOPUP_NONE, 2161 USEPOPUP_NORMAL, // use info popup 2162 USEPOPUP_HIDDEN // use info popup initially hidden 2163 } use_popup_T; 2164 2165 // Argument for estack_sfile(). 2166 typedef enum { 2167 ESTACK_NONE, 2168 ESTACK_SFILE, 2169 ESTACK_STACK 2170 } estack_arg_T; 2171 2172 // Flags for assignment functions. 2173 #define ASSIGN_FINAL 0x01 // ":final" 2174 #define ASSIGN_CONST 0x02 // ":const" 2175 #define ASSIGN_NO_DECL 0x04 // "name = expr" without ":let"/":const"/":final" 2176 #define ASSIGN_DECL 0x08 // may declare variable if it does not exist 2177 #define ASSIGN_UNPACK 0x10 // using [a, b] = list 2178 #define ASSIGN_NO_MEMBER_TYPE 0x20 // use "any" for list and dict member type 2179 #define ASSIGN_FOR_LOOP 0x40 // assigning to loop variable 2180 2181 #include "ex_cmds.h" // Ex command defines 2182 #include "spell.h" // spell checking stuff 2183 2184 #include "proto.h" // function prototypes 2185 2186 // This has to go after the include of proto.h, as proto/gui.pro declares 2187 // functions of these names. The declarations would break if the defines had 2188 // been seen at that stage. But it must be before globals.h, where error_ga 2189 // is declared. 2190 #if !defined(MSWIN) && !defined(FEAT_GUI_X11) && !defined(FEAT_GUI_HAIKU) \ 2191 && !defined(FEAT_GUI_GTK) && !defined(PROTO) 2192 # define mch_errmsg(str) fprintf(stderr, "%s", (str)) 2193 # define display_errors() fflush(stderr) 2194 # define mch_msg(str) printf("%s", (str)) 2195 #else 2196 # define USE_MCH_ERRMSG 2197 #endif 2198 2199 # if defined(FEAT_EVAL) \ 2200 && (!defined(FEAT_GUI_MSWIN) \ 2201 || !(defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) 2202 // Whether IME is supported by im_get_status() defined in mbyte.c. 2203 // For Win32 GUI it's in gui_w32.c when FEAT_MBYTE_IME or GLOBAL_IME is defined. 2204 # define IME_WITHOUT_XIM 2205 #endif 2206 2207 #if defined(FEAT_XIM) \ 2208 || defined(IME_WITHOUT_XIM) \ 2209 || (defined(FEAT_GUI_MSWIN) \ 2210 && (defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) 2211 // im_set_active() is available 2212 # define HAVE_INPUT_METHOD 2213 #endif 2214 2215 #ifndef FEAT_LINEBREAK 2216 // Without the 'numberwidth' option line numbers are always 7 chars. 2217 # define number_width(x) 7 2218 #endif 2219 2220 // This must come after including proto.h. 2221 // For VMS this is defined in macros.h. 2222 #if !defined(MSWIN) && !defined(VMS) 2223 # define mch_open(n, m, p) open((n), (m), (p)) 2224 # define mch_fopen(n, p) fopen((n), (p)) 2225 #endif 2226 2227 #include "globals.h" // global variables and messages 2228 #include "errors.h" // error messages 2229 2230 /* 2231 * If console dialog not supported, but GUI dialog is, use the GUI one. 2232 */ 2233 #if defined(FEAT_GUI_DIALOG) && !defined(FEAT_CON_DIALOG) 2234 # define do_dialog gui_mch_dialog 2235 #endif 2236 2237 /* 2238 * Default filters for gui_mch_browse(). 2239 * The filters are almost system independent. Except for the difference 2240 * between "*" and "*.*" for MSDOS-like systems. 2241 * NOTE: Motif only uses the very first pattern. Therefore 2242 * BROWSE_FILTER_DEFAULT should start with a "*" pattern. 2243 */ 2244 #ifdef FEAT_BROWSE 2245 # ifdef BACKSLASH_IN_FILENAME 2246 # define BROWSE_FILTER_MACROS \ 2247 (char_u *)N_("Vim macro files (*.vim)\t*.vim\nAll Files (*.*)\t*.*\n") 2248 # define BROWSE_FILTER_ALL_FILES (char_u *)N_("All Files (*.*)\t*.*\n") 2249 # define BROWSE_FILTER_DEFAULT \ 2250 (char_u *)N_("All Files (*.*)\t*.*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVB code (*.bas, *.frm)\t*.bas;*.frm\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n") 2251 # else 2252 # define BROWSE_FILTER_MACROS \ 2253 (char_u *)N_("Vim macro files (*.vim)\t*.vim\nAll Files (*)\t*\n") 2254 # define BROWSE_FILTER_ALL_FILES (char_u *)N_("All Files (*)\t*\n") 2255 # define BROWSE_FILTER_DEFAULT \ 2256 (char_u *)N_("All Files (*)\t*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n") 2257 # endif 2258 # define BROWSE_SAVE 1 // flag for do_browse() 2259 # define BROWSE_DIR 2 // flag for do_browse() 2260 #endif 2261 2262 #ifdef _MSC_VER 2263 // Avoid useless warning "conversion from X to Y of greater size". 2264 #pragma warning(disable : 4312) 2265 // Avoid warning for old style function declarators 2266 #pragma warning(disable : 4131) 2267 // Avoid warning for conversion to type with smaller range 2268 #pragma warning(disable : 4244) 2269 // Avoid warning for conversion to larger size 2270 #pragma warning(disable : 4306) 2271 // Avoid warning for unreferenced formal parameter 2272 #pragma warning(disable : 4100) 2273 // Avoid warning for differs in indirection to slightly different base type 2274 #pragma warning(disable : 4057) 2275 // Avoid warning for constant conditional expression 2276 #pragma warning(disable : 4127) 2277 // Avoid warning for assignment within conditional 2278 #pragma warning(disable : 4706) 2279 #endif 2280 2281 // Note: a NULL argument for vim_realloc() is not portable, don't use it. 2282 #if defined(MEM_PROFILE) 2283 # define vim_realloc(ptr, size) mem_realloc((ptr), (size)) 2284 #else 2285 # define vim_realloc(ptr, size) realloc((ptr), (size)) 2286 #endif 2287 2288 /* 2289 * Return byte length of character that starts with byte "b". 2290 * Returns 1 for a single-byte character. 2291 * MB_BYTE2LEN_CHECK() can be used to count a special key as one byte. 2292 * Don't call MB_BYTE2LEN(b) with b < 0 or b > 255! 2293 */ 2294 #define MB_BYTE2LEN(b) mb_bytelen_tab[b] 2295 #define MB_BYTE2LEN_CHECK(b) (((b) < 0 || (b) > 255) ? 1 : mb_bytelen_tab[b]) 2296 2297 // properties used in enc_canon_table[] (first three mutually exclusive) 2298 #define ENC_8BIT 0x01 2299 #define ENC_DBCS 0x02 2300 #define ENC_UNICODE 0x04 2301 2302 #define ENC_ENDIAN_B 0x10 // Unicode: Big endian 2303 #define ENC_ENDIAN_L 0x20 // Unicode: Little endian 2304 2305 #define ENC_2BYTE 0x40 // Unicode: UCS-2 2306 #define ENC_4BYTE 0x80 // Unicode: UCS-4 2307 #define ENC_2WORD 0x100 // Unicode: UTF-16 2308 2309 #define ENC_LATIN1 0x200 // Latin1 2310 #define ENC_LATIN9 0x400 // Latin9 2311 #define ENC_MACROMAN 0x800 // Mac Roman (not Macro Man! :-) 2312 2313 #ifdef USE_ICONV 2314 # ifndef EILSEQ 2315 # define EILSEQ 123 2316 # endif 2317 # ifdef DYNAMIC_ICONV 2318 // On Win32 iconv.dll is dynamically loaded. 2319 # define ICONV_ERRNO (*iconv_errno()) 2320 # define ICONV_E2BIG 7 2321 # define ICONV_EINVAL 22 2322 # define ICONV_EILSEQ 42 2323 # else 2324 # define ICONV_ERRNO errno 2325 # define ICONV_E2BIG E2BIG 2326 # define ICONV_EINVAL EINVAL 2327 # define ICONV_EILSEQ EILSEQ 2328 # endif 2329 #endif 2330 2331 #define SIGN_BYTE 1 // byte value used where sign is displayed; 2332 // attribute value is sign type 2333 2334 #ifdef FEAT_NETBEANS_INTG 2335 # define MULTISIGN_BYTE 2 // byte value used where sign is displayed if 2336 // multiple signs exist on the line 2337 #endif 2338 2339 #if defined(FEAT_GUI) && defined(FEAT_XCLIPBOARD) 2340 # ifdef FEAT_GUI_GTK 2341 // Avoid using a global variable for the X display. It's ugly 2342 // and is likely to cause trouble in multihead environments. 2343 # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : xterm_dpy) 2344 # else 2345 # define X_DISPLAY (gui.in_use ? gui.dpy : xterm_dpy) 2346 # endif 2347 #else 2348 # ifdef FEAT_GUI 2349 # ifdef FEAT_GUI_GTK 2350 # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : (Display *)NULL) 2351 # else 2352 # define X_DISPLAY gui.dpy 2353 # endif 2354 # else 2355 # define X_DISPLAY xterm_dpy 2356 # endif 2357 #endif 2358 2359 #if defined(FEAT_BROWSE) && defined(GTK_CHECK_VERSION) 2360 # if GTK_CHECK_VERSION(2,4,0) 2361 # define USE_FILE_CHOOSER 2362 # endif 2363 #endif 2364 2365 #ifdef FEAT_GUI_GTK 2366 # if !GTK_CHECK_VERSION(2,14,0) 2367 # define gtk_widget_get_window(wid) ((wid)->window) 2368 # define gtk_plug_get_socket_window(wid) ((wid)->socket_window) 2369 # define gtk_selection_data_get_data(sel) ((sel)->data) 2370 # define gtk_selection_data_get_data_type(sel) ((sel)->type) 2371 # define gtk_selection_data_get_format(sel) ((sel)->format) 2372 # define gtk_selection_data_get_length(sel) ((sel)->length) 2373 # define gtk_adjustment_set_lower(adj, low) \ 2374 do { (adj)->lower = low; } while (0) 2375 # define gtk_adjustment_set_upper(adj, up) \ 2376 do { (adj)->upper = up; } while (0) 2377 # define gtk_adjustment_set_page_size(adj, size) \ 2378 do { (adj)->page_size = size; } while (0) 2379 # define gtk_adjustment_set_page_increment(adj, inc) \ 2380 do { (adj)->page_increment = inc; } while (0) 2381 # define gtk_adjustment_set_step_increment(adj, inc) \ 2382 do { (adj)->step_increment = inc; } while (0) 2383 # endif 2384 # if !GTK_CHECK_VERSION(2,16,0) 2385 # define gtk_selection_data_get_selection(sel) ((sel)->selection) 2386 # endif 2387 # if !GTK_CHECK_VERSION(2,18,0) 2388 # define gtk_widget_get_allocation(wid, alloc) \ 2389 do { *(alloc) = (wid)->allocation; } while (0) 2390 # define gtk_widget_set_allocation(wid, alloc) \ 2391 do { (wid)->allocation = *(alloc); } while (0) 2392 # define gtk_widget_get_has_window(wid) !GTK_WIDGET_NO_WINDOW(wid) 2393 # define gtk_widget_get_sensitive(wid) GTK_WIDGET_SENSITIVE(wid) 2394 # define gtk_widget_get_visible(wid) GTK_WIDGET_VISIBLE(wid) 2395 # define gtk_widget_has_focus(wid) GTK_WIDGET_HAS_FOCUS(wid) 2396 # define gtk_widget_set_window(wid, win) \ 2397 do { (wid)->window = (win); } while (0) 2398 # define gtk_widget_set_can_default(wid, can) \ 2399 do { if (can) { GTK_WIDGET_SET_FLAGS(wid, GTK_CAN_DEFAULT); } \ 2400 else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_CAN_DEFAULT); } } while (0) 2401 # define gtk_widget_set_can_focus(wid, can) \ 2402 do { if (can) { GTK_WIDGET_SET_FLAGS(wid, GTK_CAN_FOCUS); } \ 2403 else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_CAN_FOCUS); } } while (0) 2404 # define gtk_widget_set_visible(wid, vis) \ 2405 do { if (vis) { gtk_widget_show(wid); } \ 2406 else { gtk_widget_hide(wid); } } while (0) 2407 # endif 2408 # if !GTK_CHECK_VERSION(2,20,0) 2409 # define gtk_widget_get_mapped(wid) GTK_WIDGET_MAPPED(wid) 2410 # define gtk_widget_get_realized(wid) GTK_WIDGET_REALIZED(wid) 2411 # define gtk_widget_set_mapped(wid, map) \ 2412 do { if (map) { GTK_WIDGET_SET_FLAGS(wid, GTK_MAPPED); } \ 2413 else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_MAPPED); } } while (0) 2414 # define gtk_widget_set_realized(wid, rea) \ 2415 do { if (rea) { GTK_WIDGET_SET_FLAGS(wid, GTK_REALIZED); } \ 2416 else { GTK_WIDGET_UNSET_FLAGS(wid, GTK_REALIZED); } } while (0) 2417 # endif 2418 #endif 2419 2420 #ifndef FEAT_NETBEANS_INTG 2421 # undef NBDEBUG 2422 #endif 2423 #ifdef NBDEBUG // Netbeans debugging. 2424 # include "nbdebug.h" 2425 #else 2426 # define nbdebug(a) 2427 #endif 2428 2429 #ifdef IN_PERL_FILE 2430 /* 2431 * Avoid clashes between Perl and Vim namespace. 2432 */ 2433 # undef NORMAL 2434 # undef STRLEN 2435 # undef FF 2436 # undef OP_DELETE 2437 # undef OP_JOIN 2438 // remove MAX and MIN, included by glib.h, redefined by sys/param.h 2439 # ifdef MAX 2440 # undef MAX 2441 # endif 2442 # ifdef MIN 2443 # undef MIN 2444 # endif 2445 // We use _() for gettext(), Perl uses it for function prototypes... 2446 # ifdef _ 2447 # undef _ 2448 # endif 2449 # ifdef DEBUG 2450 # undef DEBUG 2451 # endif 2452 # ifdef _DEBUG 2453 # undef _DEBUG 2454 # endif 2455 # ifdef instr 2456 # undef instr 2457 # endif 2458 // bool may cause trouble on some old versions of Mac OS X but is required 2459 // on a few other systems and for Perl 2460 # if (defined(MACOS_X) && !defined(MAC_OS_X_VERSION_10_6)) \ 2461 && defined(bool) && !defined(FEAT_PERL) 2462 # undef bool 2463 # endif 2464 2465 #endif 2466 2467 // values for vim_handle_signal() that are not a signal 2468 #define SIGNAL_BLOCK -1 2469 #define SIGNAL_UNBLOCK -2 2470 #if !defined(UNIX) && !defined(VMS) 2471 # define vim_handle_signal(x) 0 2472 #endif 2473 2474 // flags for skip_vimgrep_pat() 2475 #define VGR_GLOBAL 1 2476 #define VGR_NOJUMP 2 2477 #define VGR_FUZZY 4 2478 2479 // behavior for bad character, "++bad=" argument 2480 #define BAD_REPLACE '?' // replace it with '?' (default) 2481 #define BAD_KEEP -1 // leave it 2482 #define BAD_DROP -2 // erase it 2483 2484 // last argument for do_source() 2485 #define DOSO_NONE 0 2486 #define DOSO_VIMRC 1 // loading vimrc file 2487 #define DOSO_GVIMRC 2 // loading gvimrc file 2488 2489 // flags for read_viminfo() and children 2490 #define VIF_WANT_INFO 1 // load non-mark info 2491 #define VIF_WANT_MARKS 2 // load file marks 2492 #define VIF_ONLY_CURBUF 4 // bail out after loading marks for curbuf 2493 #define VIF_FORCEIT 8 // overwrite info already read 2494 #define VIF_GET_OLDFILES 16 // load v:oldfiles 2495 2496 // flags for buf_freeall() 2497 #define BFA_DEL 1 // buffer is going to be deleted 2498 #define BFA_WIPE 2 // buffer is going to be wiped out 2499 #define BFA_KEEP_UNDO 4 // do not free undo information 2500 #define BFA_IGNORE_ABORT 8 // do not abort for aborting() 2501 2502 // direction for nv_mousescroll() and ins_mousescroll() 2503 #define MSCR_DOWN 0 // DOWN must be FALSE 2504 #define MSCR_UP 1 2505 #define MSCR_LEFT -1 2506 #define MSCR_RIGHT -2 2507 2508 #define KEYLEN_PART_KEY -1 // keylen value for incomplete key-code 2509 #define KEYLEN_PART_MAP -2 // keylen value for incomplete mapping 2510 #define KEYLEN_REMOVED 9999 // keylen value for removed sequence 2511 2512 // Return values from win32_fileinfo(). 2513 #define FILEINFO_OK 0 2514 #define FILEINFO_ENC_FAIL 1 // enc_to_utf16() failed 2515 #define FILEINFO_READ_FAIL 2 // CreateFile() failed 2516 #define FILEINFO_INFO_FAIL 3 // GetFileInformationByHandle() failed 2517 2518 // Return value from get_option_value_strict 2519 #define SOPT_BOOL 0x01 // Boolean option 2520 #define SOPT_NUM 0x02 // Number option 2521 #define SOPT_STRING 0x04 // String option 2522 #define SOPT_GLOBAL 0x08 // Option has global value 2523 #define SOPT_WIN 0x10 // Option has window-local value 2524 #define SOPT_BUF 0x20 // Option has buffer-local value 2525 #define SOPT_UNSET 0x40 // Option does not have local value set 2526 2527 // Option types for various functions in option.c 2528 #define SREQ_GLOBAL 0 // Request global option 2529 #define SREQ_WIN 1 // Request window-local option 2530 #define SREQ_BUF 2 // Request buffer-local option 2531 2532 // Flags for get_reg_contents 2533 #define GREG_NO_EXPR 1 // Do not allow expression register 2534 #define GREG_EXPR_SRC 2 // Return expression itself for "=" register 2535 #define GREG_LIST 4 // Return list 2536 2537 // Character used as separated in autoload function/variable names. 2538 #define AUTOLOAD_CHAR '#' 2539 2540 #ifdef FEAT_JOB_CHANNEL 2541 # define MAX_OPEN_CHANNELS 10 2542 #else 2543 # define MAX_OPEN_CHANNELS 0 2544 #endif 2545 2546 #if defined(MSWIN) 2547 # define MAX_NAMED_PIPE_SIZE 65535 2548 #endif 2549 2550 // Options for json_encode() and json_decode. 2551 #define JSON_JS 1 // use JS instead of JSON 2552 #define JSON_NO_NONE 2 // v:none item not allowed 2553 #define JSON_NL 4 // append a NL 2554 2555 // Used for flags of do_in_path() 2556 #define DIP_ALL 0x01 // all matches, not just the first one 2557 #define DIP_DIR 0x02 // find directories instead of files. 2558 #define DIP_ERR 0x04 // give an error message when none found. 2559 #define DIP_START 0x08 // also use "start" directory in 'packpath' 2560 #define DIP_OPT 0x10 // also use "opt" directory in 'packpath' 2561 #define DIP_NORTP 0x20 // do not use 'runtimepath' 2562 #define DIP_NOAFTER 0x40 // skip "after" directories 2563 #define DIP_AFTER 0x80 // only use "after" directories 2564 2565 // Lowest number used for window ID. Cannot have this many windows. 2566 #define LOWEST_WIN_ID 1000 2567 2568 // Used by the garbage collector. 2569 #define COPYID_INC 2 2570 #define COPYID_MASK (~0x1) 2571 2572 // Values for trans_function_name() argument: 2573 #define TFN_INT 0x01 // internal function name OK 2574 #define TFN_QUIET 0x02 // no error messages 2575 #define TFN_NO_AUTOLOAD 0x04 // do not use script autoloading 2576 #define TFN_NO_DEREF 0x08 // do not dereference a Funcref 2577 #define TFN_READ_ONLY 0x10 // will not change the var 2578 #define TFN_NO_DECL 0x20 // only used for GLV_NO_DECL 2579 #define TFN_COMPILING 0x40 // only used for GLV_COMPILING 2580 2581 // Values for get_lval() flags argument: 2582 #define GLV_QUIET TFN_QUIET // no error messages 2583 #define GLV_NO_AUTOLOAD TFN_NO_AUTOLOAD // do not use script autoloading 2584 #define GLV_READ_ONLY TFN_READ_ONLY // will not change the var 2585 #define GLV_NO_DECL TFN_NO_DECL // assignment without :var or :let 2586 #define GLV_COMPILING TFN_COMPILING // variable may be defined later 2587 2588 #define DO_NOT_FREE_CNT 99999 // refcount for dict or list that should not 2589 // be freed. 2590 2591 // errors for when calling a function 2592 #define FCERR_UNKNOWN 0 2593 #define FCERR_TOOMANY 1 2594 #define FCERR_TOOFEW 2 2595 #define FCERR_SCRIPT 3 2596 #define FCERR_DICT 4 2597 #define FCERR_NONE 5 2598 #define FCERR_OTHER 6 2599 #define FCERR_DELETED 7 2600 #define FCERR_NOTMETHOD 8 // function cannot be used as a method 2601 2602 // fixed buffer length for fname_trans_sid() 2603 #define FLEN_FIXED 40 2604 2605 // flags for find_name_end() 2606 #define FNE_INCL_BR 1 // include [] in name 2607 #define FNE_CHECK_START 2 // check name starts with valid character 2608 2609 // BSD is supposed to cover FreeBSD and similar systems. 2610 #if (defined(SUN_SYSTEM) || defined(BSD) || defined(__FreeBSD_kernel__)) \ 2611 && (defined(S_ISCHR) || defined(S_IFCHR)) 2612 # define OPEN_CHR_FILES 2613 #endif 2614 2615 // stat macros 2616 #ifndef S_ISDIR 2617 # ifdef S_IFDIR 2618 # define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) 2619 # else 2620 # define S_ISDIR(m) 0 2621 # endif 2622 #endif 2623 #ifndef S_ISREG 2624 # ifdef S_IFREG 2625 # define S_ISREG(m) (((m) & S_IFMT) == S_IFREG) 2626 # else 2627 # define S_ISREG(m) 0 2628 # endif 2629 #endif 2630 #ifndef S_ISBLK 2631 # ifdef S_IFBLK 2632 # define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK) 2633 # else 2634 # define S_ISBLK(m) 0 2635 # endif 2636 #endif 2637 #ifndef S_ISSOCK 2638 # ifdef S_IFSOCK 2639 # define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK) 2640 # else 2641 # define S_ISSOCK(m) 0 2642 # endif 2643 #endif 2644 #ifndef S_ISFIFO 2645 # ifdef S_IFIFO 2646 # define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO) 2647 # else 2648 # define S_ISFIFO(m) 0 2649 # endif 2650 #endif 2651 #ifndef S_ISCHR 2652 # ifdef S_IFCHR 2653 # define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR) 2654 # else 2655 # define S_ISCHR(m) 0 2656 # endif 2657 #endif 2658 #ifndef S_ISLNK 2659 # ifdef S_IFLNK 2660 # define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK) 2661 # else 2662 # define S_ISLNK(m) 0 2663 # endif 2664 #endif 2665 2666 #if defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) 2667 # define ELAPSED_TIMEVAL 2668 # define ELAPSED_INIT(v) gettimeofday(&v, NULL) 2669 # define ELAPSED_FUNC(v) elapsed(&v) 2670 typedef struct timeval elapsed_T; 2671 long elapsed(struct timeval *start_tv); 2672 #elif defined(MSWIN) 2673 # define ELAPSED_TICKCOUNT 2674 # define ELAPSED_INIT(v) v = GetTickCount() 2675 # define ELAPSED_FUNC(v) elapsed(v) 2676 # ifdef PROTO 2677 typedef int DWORD; 2678 # endif 2679 typedef DWORD elapsed_T; 2680 # ifndef PROTO 2681 long elapsed(DWORD start_tick); 2682 # endif 2683 #endif 2684 2685 // Replacement for nchar used by nv_replace(). 2686 #define REPLACE_CR_NCHAR -1 2687 #define REPLACE_NL_NCHAR -2 2688 2689 // flags for term_start() 2690 #define TERM_START_NOJOB 1 2691 #define TERM_START_FORCEIT 2 2692 #define TERM_START_SYSTEM 4 2693 2694 // Used for icon/title save and restore. 2695 #define SAVE_RESTORE_TITLE 1 2696 #define SAVE_RESTORE_ICON 2 2697 #define SAVE_RESTORE_BOTH (SAVE_RESTORE_TITLE | SAVE_RESTORE_ICON) 2698 2699 // Flags for adjust_prop_columns() 2700 #define APC_SAVE_FOR_UNDO 1 // call u_savesub() before making changes 2701 #define APC_SUBSTITUTE 2 // text is replaced, not inserted 2702 2703 #define CLIP_ZINDEX 32000 2704 2705 // Flags for replace_termcodes() 2706 #define REPTERM_FROM_PART 1 2707 #define REPTERM_DO_LT 2 2708 #define REPTERM_SPECIAL 4 2709 #define REPTERM_NO_SIMPLIFY 8 2710 2711 // Flags for find_special_key() 2712 #define FSK_KEYCODE 0x01 // prefer key code, e.g. K_DEL instead of DEL 2713 #define FSK_KEEP_X_KEY 0x02 // don't translate xHome to Home key 2714 #define FSK_IN_STRING 0x04 // TRUE in string, double quote is escaped 2715 #define FSK_SIMPLIFY 0x08 // simplify <C-H> and <A-x> 2716 2717 // Flags for the readdirex function, how to sort the result 2718 #define READDIR_SORT_NONE 0 // do not sort 2719 #define READDIR_SORT_BYTE 1 // sort by byte order (strcmp), default 2720 #define READDIR_SORT_IC 2 // sort ignoring case (strcasecmp) 2721 #define READDIR_SORT_COLLATE 3 // sort according to collation (strcoll) 2722 2723 // Flags for mch_delay. 2724 #define MCH_DELAY_IGNOREINPUT 1 2725 #define MCH_DELAY_SETTMODE 2 2726 2727 // Flags for eval_variable(). 2728 #define EVAL_VAR_VERBOSE 1 // may give error message 2729 #define EVAL_VAR_NOAUTOLOAD 2 // do not use script autoloading 2730 #define EVAL_VAR_IMPORT 4 // may return special variable for import 2731 2732 // Maximum number of characters that can be fuzzy matched 2733 #define MAX_FUZZY_MATCHES 256 2734 2735 #endif // VIM__H 2736