1 /* vi:set ts=8 sts=4 sw=4 noet: 2 * 3 * VIM - Vi IMproved by Bram Moolenaar 4 * 5 * Do ":help uganda" in Vim to read copying and usage conditions. 6 * Do ":help credits" in Vim to see a list of people who contributed. 7 */ 8 9 #ifndef VIM__H 10 # define VIM__H 11 12 /* use fastcall for Borland, when compiling for Win32 */ 13 #if defined(__BORLANDC__) && defined(WIN32) && !defined(DEBUG) 14 #if defined(FEAT_PERL) || \ 15 defined(FEAT_PYTHON) || \ 16 defined(FEAT_PYTHON3) || \ 17 defined(FEAT_RUBY) || \ 18 defined(FEAT_TCL) || \ 19 defined(FEAT_MZSCHEME) || \ 20 defined(DYNAMIC_GETTEXT) || \ 21 defined(DYNAMIC_ICONV) || \ 22 defined(DYNAMIC_IME) || \ 23 defined(XPM) 24 #pragma option -pc 25 # else 26 #pragma option -pr 27 # endif 28 #endif 29 30 #if defined(WIN32) || defined(_WIN64) 31 # include "vimio.h" 32 #endif 33 34 /* ============ the header file puzzle (ca. 50-100 pieces) ========= */ 35 36 #ifdef HAVE_CONFIG_H /* GNU autoconf (or something else) was here */ 37 # include "auto/config.h" 38 # define HAVE_PATHDEF 39 40 /* 41 * Check if configure correctly managed to find sizeof(int). If this failed, 42 * it becomes zero. This is likely a problem of not being able to run the 43 * test program. Other items from configure may also be wrong then! 44 */ 45 # if (VIM_SIZEOF_INT == 0) 46 Error: configure did not run properly. Check auto/config.log. 47 # endif 48 49 /* 50 * Cygwin may have fchdir() in a newer release, but in most versions it 51 * doesn't work well and avoiding it keeps the binary backward compatible. 52 */ 53 # if defined(__CYGWIN32__) && defined(HAVE_FCHDIR) 54 # undef HAVE_FCHDIR 55 # endif 56 57 /* We may need to define the uint32_t on non-Unix system, but using the same 58 * identifier causes conflicts. Therefore use UINT32_T. */ 59 # define UINT32_TYPEDEF uint32_t 60 #endif 61 62 #if !defined(UINT32_TYPEDEF) 63 # if defined(uint32_t) /* this doesn't catch typedefs, unfortunately */ 64 # define UINT32_TYPEDEF uint32_t 65 # else 66 /* Fall back to assuming unsigned int is 32 bit. If this is wrong then the 67 * test in blowfish.c will fail. */ 68 # define UINT32_TYPEDEF unsigned int 69 # endif 70 #endif 71 72 /* user ID of root is usually zero, but not for everybody */ 73 #ifdef __TANDEM 74 # ifndef _TANDEM_SOURCE 75 # define _TANDEM_SOURCE 76 # endif 77 # include <floss.h> 78 # define ROOT_UID 65535 79 # define OLDXAW 80 # if (_TANDEM_ARCH_ == 2 && __H_Series_RVU >= 621) 81 # define SA_ONSTACK_COMPATIBILITY 82 # endif 83 #else 84 # define ROOT_UID 0 85 #endif 86 87 /* 88 * MACOS_CLASSIC compiling for MacOS prior to MacOS X 89 * MACOS_X_UNIX compiling for MacOS X (using os_unix.c) 90 * MACOS_X compiling for MacOS X (using os_unix.c) 91 * MACOS compiling for either one 92 */ 93 #if defined(macintosh) && !defined(MACOS_CLASSIC) 94 # define MACOS_CLASSIC 95 #endif 96 #if defined(MACOS_X_UNIX) 97 # define MACOS_X 98 # ifndef HAVE_CONFIG_H 99 # define UNIX 100 # endif 101 #endif 102 #if defined(MACOS_X) || defined(MACOS_CLASSIC) 103 # define MACOS 104 #endif 105 #if defined(MACOS_X) && defined(MACOS_CLASSIC) 106 Error: To compile for both MACOS X and Classic use a Classic Carbon 107 #endif 108 /* Unless made through the Makefile enforce GUI on Mac */ 109 #if defined(MACOS) && !defined(HAVE_CONFIG_H) 110 # define FEAT_GUI_MAC 111 #endif 112 113 #if defined(FEAT_GUI_MOTIF) \ 114 || defined(FEAT_GUI_GTK) \ 115 || defined(FEAT_GUI_ATHENA) \ 116 || defined(FEAT_GUI_MAC) \ 117 || defined(FEAT_GUI_W32) \ 118 || defined(FEAT_GUI_PHOTON) 119 # define FEAT_GUI_ENABLED /* also defined with NO_X11_INCLUDES */ 120 # if !defined(FEAT_GUI) && !defined(NO_X11_INCLUDES) 121 # define FEAT_GUI 122 # endif 123 #endif 124 125 /* Check support for rendering options */ 126 #ifdef FEAT_GUI 127 # if defined(FEAT_DIRECTX) 128 # define FEAT_RENDER_OPTIONS 129 # endif 130 #endif 131 132 /* Visual Studio 2005 has 'deprecated' many of the standard CRT functions */ 133 #if _MSC_VER >= 1400 134 # define _CRT_SECURE_NO_DEPRECATE 135 # define _CRT_NONSTDC_NO_DEPRECATE 136 #endif 137 138 #if defined(FEAT_GUI_W32) 139 # define FEAT_GUI_MSWIN 140 #endif 141 #if defined(WIN32) || defined(_WIN64) 142 # define MSWIN 143 #endif 144 /* Practically everything is common to both Win32 and Win64 */ 145 #if defined(WIN32) || defined(_WIN64) 146 # define WIN3264 147 #endif 148 149 /* 150 * VIM_SIZEOF_INT is used in feature.h, and the system-specific included files 151 * need items from feature.h. Therefore define VIM_SIZEOF_INT here. 152 */ 153 #ifdef WIN3264 154 # define VIM_SIZEOF_INT 4 155 #endif 156 157 #ifdef AMIGA 158 /* Be conservative about sizeof(int). It could be 4 too. */ 159 # ifndef FEAT_GUI_GTK /* avoid problems when generating prototypes */ 160 # ifdef __GNUC__ 161 # define VIM_SIZEOF_INT 4 162 # else 163 # define VIM_SIZEOF_INT 2 164 # endif 165 # endif 166 #endif 167 #ifdef MACOS 168 # if defined(__POWERPC__) || defined(MACOS_X) || defined(__fourbyteints__) \ 169 || defined(__MRC__) || defined(__SC__) || defined(__APPLE_CC__)/* MPW Compilers */ 170 # define VIM_SIZEOF_INT 4 171 # else 172 # define VIM_SIZEOF_INT 2 173 # endif 174 #endif 175 176 177 /* 178 * #defines for optionals and features 179 * Also defines FEAT_TINY, FEAT_SMALL, etc. when FEAT_HUGE is defined. 180 */ 181 #include "feature.h" 182 183 #if defined(MACOS_X_UNIX) 184 # if defined(FEAT_SMALL) && !defined(FEAT_CLIPBOARD) 185 # define FEAT_CLIPBOARD 186 # endif 187 # if defined(FEAT_SMALL) && !defined(FEAT_MOUSE) 188 # define FEAT_MOUSE 189 # endif 190 #endif 191 192 /* +x11 is only enabled when it's both available and wanted. */ 193 #if defined(HAVE_X11) && defined(WANT_X11) 194 # define FEAT_X11 195 #endif 196 197 #ifdef NO_X11_INCLUDES 198 /* In os_mac_conv.c and os_macosx.m NO_X11_INCLUDES is defined to avoid 199 * X11 headers. Disable all X11 related things to avoid conflicts. */ 200 # ifdef FEAT_X11 201 # undef FEAT_X11 202 # endif 203 # ifdef FEAT_GUI_X11 204 # undef FEAT_GUI_X11 205 # endif 206 # ifdef FEAT_XCLIPBOARD 207 # undef FEAT_XCLIPBOARD 208 # endif 209 # ifdef FEAT_GUI_MOTIF 210 # undef FEAT_GUI_MOTIF 211 # endif 212 # ifdef FEAT_GUI_ATHENA 213 # undef FEAT_GUI_ATHENA 214 # endif 215 # ifdef FEAT_GUI_GTK 216 # undef FEAT_GUI_GTK 217 # endif 218 # ifdef FEAT_BEVAL_TIP 219 # undef FEAT_BEVAL_TIP 220 # endif 221 # ifdef FEAT_XIM 222 # undef FEAT_XIM 223 # endif 224 # ifdef FEAT_CLIENTSERVER 225 # undef FEAT_CLIENTSERVER 226 # endif 227 #endif 228 229 /* The Mac conversion stuff doesn't work under X11. */ 230 #if defined(FEAT_MBYTE) && defined(MACOS_X) 231 # define MACOS_CONVERT 232 #endif 233 234 /* Can't use "PACKAGE" here, conflicts with a Perl include file. */ 235 #ifndef VIMPACKAGE 236 # define VIMPACKAGE "vim" 237 #endif 238 239 /* 240 * Find out if function definitions should include argument types 241 */ 242 #ifdef AZTEC_C 243 # include <functions.h> 244 #endif 245 246 #ifdef SASC 247 # include <clib/exec_protos.h> 248 #endif 249 250 #ifdef _DCC 251 # include <clib/exec_protos.h> 252 #endif 253 254 #ifdef __BEOS__ 255 # include "os_beos.h" 256 #endif 257 258 #if (defined(UNIX) || defined(VMS)) \ 259 && (!defined(MACOS_X) || defined(HAVE_CONFIG_H)) 260 # include "os_unix.h" /* bring lots of system header files */ 261 #endif 262 263 /* Mark unused function arguments with UNUSED, so that gcc -Wunused-parameter 264 * can be used to check for mistakes. */ 265 #ifdef HAVE_ATTRIBUTE_UNUSED 266 # define UNUSED __attribute__((unused)) 267 #else 268 # define UNUSED 269 #endif 270 271 /* if we're compiling in C++ (currently only KVim), the system 272 * headers must have the correct prototypes or nothing will build. 273 * conversely, our prototypes might clash due to throw() specifiers and 274 * cause compilation failures even though the headers are correct. For 275 * a concrete example, gcc-3.2 enforces exception specifications, and 276 * glibc-2.2.5 has them in their system headers. 277 */ 278 #if !defined(__cplusplus) && defined(UNIX) \ 279 && !defined(MACOS_X) /* MACOS_X doesn't yet support osdef.h */ 280 # include "auto/osdef.h" /* bring missing declarations in */ 281 #endif 282 283 #ifdef AMIGA 284 # include "os_amiga.h" 285 #endif 286 287 #ifdef WIN3264 288 # include "os_win32.h" 289 #endif 290 291 #ifdef __MINT__ 292 # include "os_mint.h" 293 #endif 294 295 #if defined(MACOS) 296 # if defined(__MRC__) || defined(__SC__) /* MPW Compilers */ 297 # define HAVE_SETENV 298 # endif 299 # include "os_mac.h" 300 #endif 301 302 #ifdef __QNX__ 303 # include "os_qnx.h" 304 #endif 305 306 #ifdef FEAT_SUN_WORKSHOP 307 # include "workshop.h" 308 #endif 309 310 #ifdef X_LOCALE 311 # include <X11/Xlocale.h> 312 #else 313 # ifdef HAVE_LOCALE_H 314 # include <locale.h> 315 # endif 316 #endif 317 318 /* 319 * Maximum length of a path (for non-unix systems) Make it a bit long, to stay 320 * on the safe side. But not too long to put on the stack. 321 */ 322 #ifndef MAXPATHL 323 # ifdef MAXPATHLEN 324 # define MAXPATHL MAXPATHLEN 325 # else 326 # define MAXPATHL 256 327 # endif 328 #endif 329 #ifdef BACKSLASH_IN_FILENAME 330 # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`%#'\"|!<") 331 #else 332 # ifdef VMS 333 /* VMS allows a lot of characters in the file name */ 334 # define PATH_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'\"|!") 335 # define SHELL_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'|!()&") 336 # else 337 # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<") 338 # define SHELL_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<>();&") 339 # endif 340 #endif 341 342 /* length of a buffer to store a number in ASCII (64 bits binary + NUL) */ 343 #define NUMBUFLEN 65 344 345 /* flags for vim_str2nr() */ 346 #define STR2NR_BIN 1 347 #define STR2NR_OCT 2 348 #define STR2NR_HEX 4 349 #define STR2NR_ALL (STR2NR_BIN + STR2NR_OCT + STR2NR_HEX) 350 #define STR2NR_FORCE 8 /* only when ONE of the above is used */ 351 352 /* 353 * Shorthand for unsigned variables. Many systems, but not all, have u_char 354 * already defined, so we use char_u to avoid trouble. 355 */ 356 typedef unsigned char char_u; 357 typedef unsigned short short_u; 358 typedef unsigned int int_u; 359 /* Make sure long_u is big enough to hold a pointer. 360 * On Win64, longs are 32 bits and pointers are 64 bits. 361 * For printf() and scanf(), we need to take care of long_u specifically. */ 362 #ifdef _WIN64 363 typedef unsigned __int64 long_u; 364 typedef __int64 long_i; 365 # define SCANF_HEX_LONG_U "%Ix" 366 # define SCANF_DECIMAL_LONG_U "%Iu" 367 # define PRINTF_HEX_LONG_U "0x%Ix" 368 #else 369 /* Microsoft-specific. The __w64 keyword should be specified on any typedefs 370 * that change size between 32-bit and 64-bit platforms. For any such type, 371 * __w64 should appear only on the 32-bit definition of the typedef. 372 * Define __w64 as an empty token for everything but MSVC 7.x or later. 373 */ 374 # if !defined(_MSC_VER) || (_MSC_VER < 1300) 375 # define __w64 376 # endif 377 typedef unsigned long __w64 long_u; 378 typedef long __w64 long_i; 379 # define SCANF_HEX_LONG_U "%lx" 380 # define SCANF_DECIMAL_LONG_U "%lu" 381 # define PRINTF_HEX_LONG_U "0x%lx" 382 #endif 383 #define PRINTF_DECIMAL_LONG_U SCANF_DECIMAL_LONG_U 384 385 /* 386 * Only systems which use configure will have SIZEOF_OFF_T and VIM_SIZEOF_LONG 387 * defined, which is ok since those are the same systems which can have 388 * varying sizes for off_t. The other systems will continue to use "%ld" to 389 * print off_t since off_t is simply a typedef to long for them. 390 */ 391 #if defined(SIZEOF_OFF_T) && (SIZEOF_OFF_T > VIM_SIZEOF_LONG) 392 # define LONG_LONG_OFF_T 393 #endif 394 395 /* 396 * We use 64-bit file functions here, if available. E.g. ftello() returns 397 * off_t instead of long, which helps if long is 32 bit and off_t is 64 bit. 398 * We assume that when fseeko() is available then ftello() is too. 399 * Note that Windows has different function names. 400 */ 401 #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) 402 typedef __int64 off_T; 403 # ifdef __MINGW32__ 404 # define vim_lseek lseek64 405 # define vim_fseek fseeko64 406 # define vim_ftell ftello64 407 # else 408 # define vim_lseek _lseeki64 409 # define vim_fseek _fseeki64 410 # define vim_ftell _ftelli64 411 # endif 412 #else 413 # ifdef PROTO 414 typedef long off_T; 415 # else 416 typedef off_t off_T; 417 # endif 418 # ifdef HAVE_FSEEKO 419 # define vim_lseek lseek 420 # define vim_ftell ftello 421 # define vim_fseek fseeko 422 # else 423 # define vim_lseek lseek 424 # define vim_ftell ftell 425 # define vim_fseek(a, b, c) fseek(a, (long)b, c) 426 # endif 427 #endif 428 429 /* 430 * The characters and attributes cached for the screen. 431 */ 432 typedef char_u schar_T; 433 #ifdef FEAT_SYN_HL 434 typedef unsigned short sattr_T; 435 # define MAX_TYPENR 65535 436 #else 437 typedef unsigned char sattr_T; 438 # define MAX_TYPENR 255 439 #endif 440 441 /* 442 * The u8char_T can hold one decoded UTF-8 character. 443 * We normally use 32 bits now, since some Asian characters don't fit in 16 444 * bits. u8char_T is only used for displaying, it could be 16 bits to save 445 * memory. 446 */ 447 #ifdef FEAT_MBYTE 448 # ifdef UNICODE16 449 typedef unsigned short u8char_T; /* short should be 16 bits */ 450 # else 451 # if VIM_SIZEOF_INT >= 4 452 typedef unsigned int u8char_T; /* int is 32 bits */ 453 # else 454 typedef unsigned long u8char_T; /* long should be 32 bits or more */ 455 # endif 456 # endif 457 #endif 458 459 #ifndef UNIX /* For Unix this is included in os_unix.h */ 460 # include <stdio.h> 461 # include <ctype.h> 462 #endif 463 464 #include "ascii.h" 465 #include "keymap.h" 466 #include "term.h" 467 #include "macros.h" 468 469 #ifdef LATTICE 470 # include <sys/types.h> 471 # include <sys/stat.h> 472 #endif 473 #ifdef _DCC 474 # include <sys/stat.h> 475 #endif 476 #if defined(MSWIN) 477 # include <sys/stat.h> 478 #endif 479 480 #if defined(HAVE_ERRNO_H) \ 481 || defined(WIN32) || defined(_WIN64) 482 # include <errno.h> 483 #endif 484 485 /* 486 * Allow other (non-unix) systems to configure themselves now 487 * These are also in os_unix.h, because osdef.sh needs them there. 488 */ 489 #ifndef UNIX 490 /* Note: Some systems need both string.h and strings.h (Savage). If the 491 * system can't handle this, define NO_STRINGS_WITH_STRING_H. */ 492 # ifdef HAVE_STRING_H 493 # include <string.h> 494 # endif 495 # if defined(HAVE_STRINGS_H) && !defined(NO_STRINGS_WITH_STRING_H) 496 # include <strings.h> 497 # endif 498 # ifdef HAVE_STAT_H 499 # include <stat.h> 500 # endif 501 # ifdef HAVE_STDLIB_H 502 # include <stdlib.h> 503 # endif 504 #endif /* NON-UNIX */ 505 506 #include <assert.h> 507 508 #ifdef HAVE_STDINT_H 509 # include <stdint.h> 510 #endif 511 #ifdef HAVE_INTTYPES_H 512 # include <inttypes.h> 513 #endif 514 #ifdef HAVE_WCTYPE_H 515 # include <wctype.h> 516 #endif 517 #include <stdarg.h> 518 519 /* for offsetof() */ 520 #include <stddef.h> 521 522 #if defined(HAVE_SYS_SELECT_H) && \ 523 (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) 524 # include <sys/select.h> 525 #endif 526 527 #ifndef HAVE_SELECT 528 # ifdef HAVE_SYS_POLL_H 529 # include <sys/poll.h> 530 # elif defined(WIN32) 531 # define HAVE_SELECT 532 # else 533 # ifdef HAVE_POLL_H 534 # include <poll.h> 535 # endif 536 # endif 537 #endif 538 539 /* ================ end of the header file puzzle =============== */ 540 541 /* 542 * For dynamically loaded imm library. Currently, only for Win32. 543 */ 544 #ifdef DYNAMIC_IME 545 # ifndef FEAT_MBYTE_IME 546 # define FEAT_MBYTE_IME 547 # endif 548 #endif 549 550 /* 551 * Check input method control. 552 */ 553 #if defined(FEAT_XIM) \ 554 || (defined(FEAT_GUI) && (defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \ 555 || (defined(FEAT_GUI_MAC) && defined(FEAT_MBYTE)) 556 # define USE_IM_CONTROL 557 #endif 558 559 /* 560 * For dynamically loaded gettext library. Currently, only for Win32. 561 */ 562 #ifdef DYNAMIC_GETTEXT 563 # ifndef FEAT_GETTEXT 564 # define FEAT_GETTEXT 565 # endif 566 /* These are in os_win32.c */ 567 extern char *(*dyn_libintl_gettext)(const char *msgid); 568 extern char *(*dyn_libintl_ngettext)(const char *msgid, const char *msgid_plural, unsigned long n); 569 extern char *(*dyn_libintl_bindtextdomain)(const char *domainname, const char *dirname); 570 extern char *(*dyn_libintl_bind_textdomain_codeset)(const char *domainname, const char *codeset); 571 extern char *(*dyn_libintl_textdomain)(const char *domainname); 572 #endif 573 574 575 /* 576 * The _() stuff is for using gettext(). It is a no-op when libintl.h is not 577 * found or the +multilang feature is disabled. 578 */ 579 #ifdef FEAT_GETTEXT 580 # ifdef DYNAMIC_GETTEXT 581 # define _(x) (*dyn_libintl_gettext)((char *)(x)) 582 # define ngettext(x, xs, n) (*dyn_libintl_ngettext)((char *)(x), (char *)(xs), (n)) 583 # define N_(x) x 584 # define bindtextdomain(domain, dir) (*dyn_libintl_bindtextdomain)((domain), (dir)) 585 # define bind_textdomain_codeset(domain, codeset) (*dyn_libintl_bind_textdomain_codeset)((domain), (codeset)) 586 # if !defined(HAVE_BIND_TEXTDOMAIN_CODESET) 587 # define HAVE_BIND_TEXTDOMAIN_CODESET 1 588 # endif 589 # define textdomain(domain) (*dyn_libintl_textdomain)(domain) 590 # else 591 # include <libintl.h> 592 # define _(x) gettext((char *)(x)) 593 # ifdef gettext_noop 594 # define N_(x) gettext_noop(x) 595 # else 596 # define N_(x) x 597 # endif 598 # endif 599 #else 600 # define _(x) ((char *)(x)) 601 # define ngettext(x, xs, n) (((n) == 1) ? (char *)(x) : (char *)(xs)) 602 # define N_(x) x 603 # ifdef bindtextdomain 604 # undef bindtextdomain 605 # endif 606 # define bindtextdomain(x, y) /* empty */ 607 # ifdef bind_textdomain_codeset 608 # undef bind_textdomain_codeset 609 # endif 610 # define bind_textdomain_codeset(x, y) /* empty */ 611 # ifdef textdomain 612 # undef textdomain 613 # endif 614 # define textdomain(x) /* empty */ 615 #endif 616 617 /* 618 * flags for update_screen() 619 * The higher the value, the higher the priority 620 */ 621 #define VALID 10 /* buffer not changed, or changes marked 622 with b_mod_* */ 623 #define INVERTED 20 /* redisplay inverted part that changed */ 624 #define INVERTED_ALL 25 /* redisplay whole inverted part */ 625 #define REDRAW_TOP 30 /* display first w_upd_rows screen lines */ 626 #define SOME_VALID 35 /* like NOT_VALID but may scroll */ 627 #define NOT_VALID 40 /* buffer needs complete redraw */ 628 #define CLEAR 50 /* screen messed up, clear it */ 629 630 /* 631 * Flags for w_valid. 632 * These are set when something in a window structure becomes invalid, except 633 * when the cursor is moved. Call check_cursor_moved() before testing one of 634 * the flags. 635 * These are reset when that thing has been updated and is valid again. 636 * 637 * Every function that invalidates one of these must call one of the 638 * invalidate_* functions. 639 * 640 * w_valid is supposed to be used only in screen.c. From other files, use the 641 * functions that set or reset the flags. 642 * 643 * VALID_BOTLINE VALID_BOTLINE_AP 644 * on on w_botline valid 645 * off on w_botline approximated 646 * off off w_botline not valid 647 * on off not possible 648 */ 649 #define VALID_WROW 0x01 /* w_wrow (window row) is valid */ 650 #define VALID_WCOL 0x02 /* w_wcol (window col) is valid */ 651 #define VALID_VIRTCOL 0x04 /* w_virtcol (file col) is valid */ 652 #define VALID_CHEIGHT 0x08 /* w_cline_height and w_cline_folded valid */ 653 #define VALID_CROW 0x10 /* w_cline_row is valid */ 654 #define VALID_BOTLINE 0x20 /* w_botine and w_empty_rows are valid */ 655 #define VALID_BOTLINE_AP 0x40 /* w_botine is approximated */ 656 #define VALID_TOPLINE 0x80 /* w_topline is valid (for cursor position) */ 657 658 /* 659 * Terminal highlighting attribute bits. 660 * Attributes above HL_ALL are used for syntax highlighting. 661 */ 662 #define HL_NORMAL 0x00 663 #define HL_INVERSE 0x01 664 #define HL_BOLD 0x02 665 #define HL_ITALIC 0x04 666 #define HL_UNDERLINE 0x08 667 #define HL_UNDERCURL 0x10 668 #define HL_STANDOUT 0x20 669 #define HL_ALL 0x3f 670 671 /* special attribute addition: Put message in history */ 672 #define MSG_HIST 0x1000 673 674 /* 675 * values for State 676 * 677 * The lower bits up to 0x20 are used to distinguish normal/visual/op_pending 678 * and cmdline/insert+replace mode. This is used for mapping. If none of 679 * these bits are set, no mapping is done. 680 * The upper bits are used to distinguish between other states. 681 */ 682 #define NORMAL 0x01 /* Normal mode, command expected */ 683 #define VISUAL 0x02 /* Visual mode - use get_real_state() */ 684 #define OP_PENDING 0x04 /* Normal mode, operator is pending - use 685 get_real_state() */ 686 #define CMDLINE 0x08 /* Editing command line */ 687 #define INSERT 0x10 /* Insert mode */ 688 #define LANGMAP 0x20 /* Language mapping, can be combined with 689 INSERT and CMDLINE */ 690 691 #define REPLACE_FLAG 0x40 /* Replace mode flag */ 692 #define REPLACE (REPLACE_FLAG + INSERT) 693 #ifdef FEAT_VREPLACE 694 # define VREPLACE_FLAG 0x80 /* Virtual-replace mode flag */ 695 # define VREPLACE (REPLACE_FLAG + VREPLACE_FLAG + INSERT) 696 #endif 697 #define LREPLACE (REPLACE_FLAG + LANGMAP) 698 699 #define NORMAL_BUSY (0x100 + NORMAL) /* Normal mode, busy with a command */ 700 #define HITRETURN (0x200 + NORMAL) /* waiting for return or command */ 701 #define ASKMORE 0x300 /* Asking if you want --more-- */ 702 #define SETWSIZE 0x400 /* window size has changed */ 703 #define ABBREV 0x500 /* abbreviation instead of mapping */ 704 #define EXTERNCMD 0x600 /* executing an external command */ 705 #define SHOWMATCH (0x700 + INSERT) /* show matching paren */ 706 #define CONFIRM 0x800 /* ":confirm" prompt */ 707 #define SELECTMODE 0x1000 /* Select mode, only for mappings */ 708 709 #define MAP_ALL_MODES (0x3f | SELECTMODE) /* all mode bits used for 710 * mapping */ 711 712 /* directions */ 713 #define FORWARD 1 714 #define BACKWARD (-1) 715 #define FORWARD_FILE 3 716 #define BACKWARD_FILE (-3) 717 718 /* return values for functions */ 719 #if !(defined(OK) && (OK == 1)) 720 /* OK already defined to 1 in MacOS X curses, skip this */ 721 # define OK 1 722 #endif 723 #define FAIL 0 724 #define NOTDONE 2 /* not OK or FAIL but skipped */ 725 726 /* flags for b_flags */ 727 #define BF_RECOVERED 0x01 /* buffer has been recovered */ 728 #define BF_CHECK_RO 0x02 /* need to check readonly when loading file 729 into buffer (set by ":e", may be reset by 730 ":buf" */ 731 #define BF_NEVERLOADED 0x04 /* file has never been loaded into buffer, 732 many variables still need to be set */ 733 #define BF_NOTEDITED 0x08 /* Set when file name is changed after 734 starting to edit, reset when file is 735 written out. */ 736 #define BF_NEW 0x10 /* file didn't exist when editing started */ 737 #define BF_NEW_W 0x20 /* Warned for BF_NEW and file created */ 738 #define BF_READERR 0x40 /* got errors while reading the file */ 739 #define BF_DUMMY 0x80 /* dummy buffer, only used internally */ 740 #define BF_PRESERVED 0x100 /* ":preserve" was used */ 741 742 /* Mask to check for flags that prevent normal writing */ 743 #define BF_WRITE_MASK (BF_NOTEDITED + BF_NEW + BF_READERR) 744 745 /* 746 * values for xp_context when doing command line completion 747 */ 748 #define EXPAND_UNSUCCESSFUL (-2) 749 #define EXPAND_OK (-1) 750 #define EXPAND_NOTHING 0 751 #define EXPAND_COMMANDS 1 752 #define EXPAND_FILES 2 753 #define EXPAND_DIRECTORIES 3 754 #define EXPAND_SETTINGS 4 755 #define EXPAND_BOOL_SETTINGS 5 756 #define EXPAND_TAGS 6 757 #define EXPAND_OLD_SETTING 7 758 #define EXPAND_HELP 8 759 #define EXPAND_BUFFERS 9 760 #define EXPAND_EVENTS 10 761 #define EXPAND_MENUS 11 762 #define EXPAND_SYNTAX 12 763 #define EXPAND_HIGHLIGHT 13 764 #define EXPAND_AUGROUP 14 765 #define EXPAND_USER_VARS 15 766 #define EXPAND_MAPPINGS 16 767 #define EXPAND_TAGS_LISTFILES 17 768 #define EXPAND_FUNCTIONS 18 769 #define EXPAND_USER_FUNC 19 770 #define EXPAND_EXPRESSION 20 771 #define EXPAND_MENUNAMES 21 772 #define EXPAND_USER_COMMANDS 22 773 #define EXPAND_USER_CMD_FLAGS 23 774 #define EXPAND_USER_NARGS 24 775 #define EXPAND_USER_COMPLETE 25 776 #define EXPAND_ENV_VARS 26 777 #define EXPAND_LANGUAGE 27 778 #define EXPAND_COLORS 28 779 #define EXPAND_COMPILER 29 780 #define EXPAND_USER_DEFINED 30 781 #define EXPAND_USER_LIST 31 782 #define EXPAND_SHELLCMD 32 783 #define EXPAND_CSCOPE 33 784 #define EXPAND_SIGN 34 785 #define EXPAND_PROFILE 35 786 #define EXPAND_BEHAVE 36 787 #define EXPAND_FILETYPE 37 788 #define EXPAND_FILES_IN_PATH 38 789 #define EXPAND_OWNSYNTAX 39 790 #define EXPAND_LOCALES 40 791 #define EXPAND_HISTORY 41 792 #define EXPAND_USER 42 793 #define EXPAND_SYNTIME 43 794 #define EXPAND_USER_ADDR_TYPE 44 795 #define EXPAND_PACKADD 45 796 #define EXPAND_MESSAGES 46 797 798 /* Values for exmode_active (0 is no exmode) */ 799 #define EXMODE_NORMAL 1 800 #define EXMODE_VIM 2 801 802 /* Values for nextwild() and ExpandOne(). See ExpandOne() for meaning. */ 803 #define WILD_FREE 1 804 #define WILD_EXPAND_FREE 2 805 #define WILD_EXPAND_KEEP 3 806 #define WILD_NEXT 4 807 #define WILD_PREV 5 808 #define WILD_ALL 6 809 #define WILD_LONGEST 7 810 #define WILD_ALL_KEEP 8 811 812 #define WILD_LIST_NOTFOUND 0x01 813 #define WILD_HOME_REPLACE 0x02 814 #define WILD_USE_NL 0x04 815 #define WILD_NO_BEEP 0x08 816 #define WILD_ADD_SLASH 0x10 817 #define WILD_KEEP_ALL 0x20 818 #define WILD_SILENT 0x40 819 #define WILD_ESCAPE 0x80 820 #define WILD_ICASE 0x100 821 #define WILD_ALLLINKS 0x200 822 823 /* Flags for expand_wildcards() */ 824 #define EW_DIR 0x01 /* include directory names */ 825 #define EW_FILE 0x02 /* include file names */ 826 #define EW_NOTFOUND 0x04 /* include not found names */ 827 #define EW_ADDSLASH 0x08 /* append slash to directory name */ 828 #define EW_KEEPALL 0x10 /* keep all matches */ 829 #define EW_SILENT 0x20 /* don't print "1 returned" from shell */ 830 #define EW_EXEC 0x40 /* executable files */ 831 #define EW_PATH 0x80 /* search in 'path' too */ 832 #define EW_ICASE 0x100 /* ignore case */ 833 #define EW_NOERROR 0x200 /* no error for bad regexp */ 834 #define EW_NOTWILD 0x400 /* add match with literal name if exists */ 835 #define EW_KEEPDOLLAR 0x800 /* do not escape $, $var is expanded */ 836 /* Note: mostly EW_NOTFOUND and EW_SILENT are mutually exclusive: EW_NOTFOUND 837 * is used when executing commands and EW_SILENT for interactive expanding. */ 838 #define EW_ALLLINKS 0x1000 /* also links not pointing to existing file */ 839 #define EW_SHELLCMD 0x2000 /* called from expand_shellcmd(), don't check 840 * if executable is in $PATH */ 841 #define EW_DODOT 0x4000 /* also files starting with a dot */ 842 #define EW_EMPTYOK 0x8000 /* no matches is not an error */ 843 844 /* Flags for find_file_*() functions. */ 845 #define FINDFILE_FILE 0 /* only files */ 846 #define FINDFILE_DIR 1 /* only directories */ 847 #define FINDFILE_BOTH 2 /* files and directories */ 848 849 #ifdef FEAT_WINDOWS 850 # define W_WINCOL(wp) (wp->w_wincol) 851 # define W_WIDTH(wp) (wp->w_width) 852 # define W_ENDCOL(wp) (wp->w_wincol + wp->w_width) 853 # define W_VSEP_WIDTH(wp) (wp->w_vsep_width) 854 #else 855 # define W_WINCOL(wp) 0 856 # define W_WIDTH(wp) Columns 857 # define W_ENDCOL(wp) Columns 858 # define W_VSEP_WIDTH(wp) 0 859 #endif 860 #ifdef FEAT_WINDOWS 861 # define W_STATUS_HEIGHT(wp) (wp->w_status_height) 862 # define W_WINROW(wp) (wp->w_winrow) 863 #else 864 # define W_STATUS_HEIGHT(wp) 0 865 # define W_WINROW(wp) 0 866 #endif 867 868 #ifdef NO_EXPANDPATH 869 # define gen_expand_wildcards mch_expand_wildcards 870 #endif 871 872 /* Values for the find_pattern_in_path() function args 'type' and 'action': */ 873 #define FIND_ANY 1 874 #define FIND_DEFINE 2 875 #define CHECK_PATH 3 876 877 #define ACTION_SHOW 1 878 #define ACTION_GOTO 2 879 #define ACTION_SPLIT 3 880 #define ACTION_SHOW_ALL 4 881 #ifdef FEAT_INS_EXPAND 882 # define ACTION_EXPAND 5 883 #endif 884 885 #ifdef FEAT_SYN_HL 886 # define SST_MIN_ENTRIES 150 /* minimal size for state stack array */ 887 # define SST_MAX_ENTRIES 1000 /* maximal size for state stack array */ 888 # define SST_FIX_STATES 7 /* size of sst_stack[]. */ 889 # define SST_DIST 16 /* normal distance between entries */ 890 # define SST_INVALID (synstate_T *)-1 /* invalid syn_state pointer */ 891 892 # define HL_CONTAINED 0x01 /* not used on toplevel */ 893 # define HL_TRANSP 0x02 /* has no highlighting */ 894 # define HL_ONELINE 0x04 /* match within one line only */ 895 # define HL_HAS_EOL 0x08 /* end pattern that matches with $ */ 896 # define HL_SYNC_HERE 0x10 /* sync point after this item (syncing only) */ 897 # define HL_SYNC_THERE 0x20 /* sync point at current line (syncing only) */ 898 # define HL_MATCH 0x40 /* use match ID instead of item ID */ 899 # define HL_SKIPNL 0x80 /* nextgroup can skip newlines */ 900 # define HL_SKIPWHITE 0x100 /* nextgroup can skip white space */ 901 # define HL_SKIPEMPTY 0x200 /* nextgroup can skip empty lines */ 902 # define HL_KEEPEND 0x400 /* end match always kept */ 903 # define HL_EXCLUDENL 0x800 /* exclude NL from match */ 904 # define HL_DISPLAY 0x1000 /* only used for displaying, not syncing */ 905 # define HL_FOLD 0x2000 /* define fold */ 906 # define HL_EXTEND 0x4000 /* ignore a keepend */ 907 # define HL_MATCHCONT 0x8000 /* match continued from previous line */ 908 # define HL_TRANS_CONT 0x10000 /* transparent item without contains arg */ 909 # define HL_CONCEAL 0x20000 /* can be concealed */ 910 # define HL_CONCEALENDS 0x40000 /* can be concealed */ 911 #endif 912 913 /* Values for 'options' argument in do_search() and searchit() */ 914 #define SEARCH_REV 0x01 /* go in reverse of previous dir. */ 915 #define SEARCH_ECHO 0x02 /* echo the search command and handle options */ 916 #define SEARCH_MSG 0x0c /* give messages (yes, it's not 0x04) */ 917 #define SEARCH_NFMSG 0x08 /* give all messages except not found */ 918 #define SEARCH_OPT 0x10 /* interpret optional flags */ 919 #define SEARCH_HIS 0x20 /* put search pattern in history */ 920 #define SEARCH_END 0x40 /* put cursor at end of match */ 921 #define SEARCH_NOOF 0x80 /* don't add offset to position */ 922 #define SEARCH_START 0x100 /* start search without col offset */ 923 #define SEARCH_MARK 0x200 /* set previous context mark */ 924 #define SEARCH_KEEP 0x400 /* keep previous search pattern */ 925 #define SEARCH_PEEK 0x800 /* peek for typed char, cancel search */ 926 #define SEARCH_COL 0x1000 /* start at specified column instead of zero */ 927 928 /* Values for find_ident_under_cursor() */ 929 #define FIND_IDENT 1 /* find identifier (word) */ 930 #define FIND_STRING 2 /* find any string (WORD) */ 931 #define FIND_EVAL 4 /* include "->", "[]" and "." */ 932 933 /* Values for file_name_in_line() */ 934 #define FNAME_MESS 1 /* give error message */ 935 #define FNAME_EXP 2 /* expand to path */ 936 #define FNAME_HYP 4 /* check for hypertext link */ 937 #define FNAME_INCL 8 /* apply 'includeexpr' */ 938 #define FNAME_REL 16 /* ".." and "./" are relative to the (current) 939 file instead of the current directory */ 940 #define FNAME_UNESC 32 /* remove backslashes used for escaping */ 941 942 /* Values for buflist_getfile() */ 943 #define GETF_SETMARK 0x01 /* set pcmark before jumping */ 944 #define GETF_ALT 0x02 /* jumping to alternate file (not buf num) */ 945 #define GETF_SWITCH 0x04 /* respect 'switchbuf' settings when jumping */ 946 947 /* Values for buflist_new() flags */ 948 #define BLN_CURBUF 1 /* may re-use curbuf for new buffer */ 949 #define BLN_LISTED 2 /* put new buffer in buffer list */ 950 #define BLN_DUMMY 4 /* allocating dummy buffer */ 951 #define BLN_NEW 8 /* create a new buffer */ 952 #define BLN_NOOPT 16 /* don't copy options to existing buffer */ 953 #define BLN_DUMMY_OK 32 /* also find an existing dummy buffer */ 954 955 /* Values for in_cinkeys() */ 956 #define KEY_OPEN_FORW 0x101 957 #define KEY_OPEN_BACK 0x102 958 #define KEY_COMPLETE 0x103 /* end of completion */ 959 960 /* Values for "noremap" argument of ins_typebuf(). Also used for 961 * map->m_noremap and menu->noremap[]. */ 962 #define REMAP_YES 0 /* allow remapping */ 963 #define REMAP_NONE -1 /* no remapping */ 964 #define REMAP_SCRIPT -2 /* remap script-local mappings only */ 965 #define REMAP_SKIP -3 /* no remapping for first char */ 966 967 /* Values for mch_call_shell() second argument */ 968 #define SHELL_FILTER 1 /* filtering text */ 969 #define SHELL_EXPAND 2 /* expanding wildcards */ 970 #define SHELL_COOKED 4 /* set term to cooked mode */ 971 #define SHELL_DOOUT 8 /* redirecting output */ 972 #define SHELL_SILENT 16 /* don't print error returned by command */ 973 #define SHELL_READ 32 /* read lines and insert into buffer */ 974 #define SHELL_WRITE 64 /* write lines from buffer */ 975 976 /* Values returned by mch_nodetype() */ 977 #define NODE_NORMAL 0 /* file or directory, check with mch_isdir()*/ 978 #define NODE_WRITABLE 1 /* something we can write to (character 979 device, fifo, socket, ..) */ 980 #define NODE_OTHER 2 /* non-writable thing (e.g., block device) */ 981 982 /* Values for readfile() flags */ 983 #define READ_NEW 0x01 /* read a file into a new buffer */ 984 #define READ_FILTER 0x02 /* read filter output */ 985 #define READ_STDIN 0x04 /* read from stdin */ 986 #define READ_BUFFER 0x08 /* read from curbuf (converting stdin) */ 987 #define READ_DUMMY 0x10 /* reading into a dummy buffer */ 988 #define READ_KEEP_UNDO 0x20 /* keep undo info */ 989 #define READ_FIFO 0x40 /* read from fifo or socket */ 990 991 /* Values for change_indent() */ 992 #define INDENT_SET 1 /* set indent */ 993 #define INDENT_INC 2 /* increase indent */ 994 #define INDENT_DEC 3 /* decrease indent */ 995 996 /* Values for flags argument for findmatchlimit() */ 997 #define FM_BACKWARD 0x01 /* search backwards */ 998 #define FM_FORWARD 0x02 /* search forwards */ 999 #define FM_BLOCKSTOP 0x04 /* stop at start/end of block */ 1000 #define FM_SKIPCOMM 0x08 /* skip comments */ 1001 1002 /* Values for action argument for do_buffer() */ 1003 #define DOBUF_GOTO 0 /* go to specified buffer */ 1004 #define DOBUF_SPLIT 1 /* split window and go to specified buffer */ 1005 #define DOBUF_UNLOAD 2 /* unload specified buffer(s) */ 1006 #define DOBUF_DEL 3 /* delete specified buffer(s) from buflist */ 1007 #define DOBUF_WIPE 4 /* delete specified buffer(s) really */ 1008 1009 /* Values for start argument for do_buffer() */ 1010 #define DOBUF_CURRENT 0 /* "count" buffer from current buffer */ 1011 #define DOBUF_FIRST 1 /* "count" buffer from first buffer */ 1012 #define DOBUF_LAST 2 /* "count" buffer from last buffer */ 1013 #define DOBUF_MOD 3 /* "count" mod. buffer from current buffer */ 1014 1015 /* Values for sub_cmd and which_pat argument for search_regcomp() */ 1016 /* Also used for which_pat argument for searchit() */ 1017 #define RE_SEARCH 0 /* save/use pat in/from search_pattern */ 1018 #define RE_SUBST 1 /* save/use pat in/from subst_pattern */ 1019 #define RE_BOTH 2 /* save pat in both patterns */ 1020 #define RE_LAST 2 /* use last used pattern if "pat" is NULL */ 1021 1022 /* Second argument for vim_regcomp(). */ 1023 #define RE_MAGIC 1 /* 'magic' option */ 1024 #define RE_STRING 2 /* match in string instead of buffer text */ 1025 #define RE_STRICT 4 /* don't allow [abc] without ] */ 1026 #define RE_AUTO 8 /* automatic engine selection */ 1027 1028 #ifdef FEAT_SYN_HL 1029 /* values for reg_do_extmatch */ 1030 # define REX_SET 1 /* to allow \z\(...\), */ 1031 # define REX_USE 2 /* to allow \z\1 et al. */ 1032 #endif 1033 1034 /* Return values for fullpathcmp() */ 1035 /* Note: can use (fullpathcmp() & FPC_SAME) to check for equal files */ 1036 #define FPC_SAME 1 /* both exist and are the same file. */ 1037 #define FPC_DIFF 2 /* both exist and are different files. */ 1038 #define FPC_NOTX 4 /* both don't exist. */ 1039 #define FPC_DIFFX 6 /* one of them doesn't exist. */ 1040 #define FPC_SAMEX 7 /* both don't exist and file names are same. */ 1041 1042 /* flags for do_ecmd() */ 1043 #define ECMD_HIDE 0x01 /* don't free the current buffer */ 1044 #define ECMD_SET_HELP 0x02 /* set b_help flag of (new) buffer before 1045 opening file */ 1046 #define ECMD_OLDBUF 0x04 /* use existing buffer if it exists */ 1047 #define ECMD_FORCEIT 0x08 /* ! used in Ex command */ 1048 #define ECMD_ADDBUF 0x10 /* don't edit, just add to buffer list */ 1049 1050 /* for lnum argument in do_ecmd() */ 1051 #define ECMD_LASTL (linenr_T)0 /* use last position in loaded file */ 1052 #define ECMD_LAST (linenr_T)-1 /* use last position in all files */ 1053 #define ECMD_ONE (linenr_T)1 /* use first line */ 1054 1055 /* flags for do_cmdline() */ 1056 #define DOCMD_VERBOSE 0x01 /* included command in error message */ 1057 #define DOCMD_NOWAIT 0x02 /* don't call wait_return() and friends */ 1058 #define DOCMD_REPEAT 0x04 /* repeat exec. until getline() returns NULL */ 1059 #define DOCMD_KEYTYPED 0x08 /* don't reset KeyTyped */ 1060 #define DOCMD_EXCRESET 0x10 /* reset exception environment (for debugging)*/ 1061 #define DOCMD_KEEPLINE 0x20 /* keep typed line for repeating with "." */ 1062 1063 /* flags for beginline() */ 1064 #define BL_WHITE 1 /* cursor on first non-white in the line */ 1065 #define BL_SOL 2 /* use 'sol' option */ 1066 #define BL_FIX 4 /* don't leave cursor on a NUL */ 1067 1068 /* flags for mf_sync() */ 1069 #define MFS_ALL 1 /* also sync blocks with negative numbers */ 1070 #define MFS_STOP 2 /* stop syncing when a character is available */ 1071 #define MFS_FLUSH 4 /* flushed file to disk */ 1072 #define MFS_ZERO 8 /* only write block 0 */ 1073 1074 /* flags for buf_copy_options() */ 1075 #define BCO_ENTER 1 /* going to enter the buffer */ 1076 #define BCO_ALWAYS 2 /* always copy the options */ 1077 #define BCO_NOHELP 4 /* don't touch the help related options */ 1078 1079 /* flags for do_put() */ 1080 #define PUT_FIXINDENT 1 /* make indent look nice */ 1081 #define PUT_CURSEND 2 /* leave cursor after end of new text */ 1082 #define PUT_CURSLINE 4 /* leave cursor on last line of new text */ 1083 #define PUT_LINE 8 /* put register as lines */ 1084 #define PUT_LINE_SPLIT 16 /* split line for linewise register */ 1085 #define PUT_LINE_FORWARD 32 /* put linewise register below Visual sel. */ 1086 1087 /* flags for set_indent() */ 1088 #define SIN_CHANGED 1 /* call changed_bytes() when line changed */ 1089 #define SIN_INSERT 2 /* insert indent before existing text */ 1090 #define SIN_UNDO 4 /* save line for undo before changing it */ 1091 1092 /* flags for insertchar() */ 1093 #define INSCHAR_FORMAT 1 /* force formatting */ 1094 #define INSCHAR_DO_COM 2 /* format comments */ 1095 #define INSCHAR_CTRLV 4 /* char typed just after CTRL-V */ 1096 #define INSCHAR_NO_FEX 8 /* don't use 'formatexpr' */ 1097 #define INSCHAR_COM_LIST 16 /* format comments with list/2nd line indent */ 1098 1099 /* flags for open_line() */ 1100 #define OPENLINE_DELSPACES 1 /* delete spaces after cursor */ 1101 #define OPENLINE_DO_COM 2 /* format comments */ 1102 #define OPENLINE_KEEPTRAIL 4 /* keep trailing spaces */ 1103 #define OPENLINE_MARKFIX 8 /* fix mark positions */ 1104 #define OPENLINE_COM_LIST 16 /* format comments with list/2nd line indent */ 1105 1106 /* 1107 * There are five history tables: 1108 */ 1109 #define HIST_CMD 0 /* colon commands */ 1110 #define HIST_SEARCH 1 /* search commands */ 1111 #define HIST_EXPR 2 /* expressions (from entering = register) */ 1112 #define HIST_INPUT 3 /* input() lines */ 1113 #define HIST_DEBUG 4 /* debug commands */ 1114 #define HIST_COUNT 5 /* number of history tables */ 1115 1116 /* The type numbers are fixed for backwards compatibility. */ 1117 #define BARTYPE_VERSION 1 1118 #define BARTYPE_HISTORY 2 1119 #define BARTYPE_REGISTER 3 1120 #define BARTYPE_MARK 4 1121 1122 #define VIMINFO_VERSION 4 1123 #define VIMINFO_VERSION_WITH_HISTORY 2 1124 #define VIMINFO_VERSION_WITH_REGISTERS 3 1125 #define VIMINFO_VERSION_WITH_MARKS 4 1126 1127 typedef enum { 1128 BVAL_NR, 1129 BVAL_STRING, 1130 BVAL_EMPTY 1131 } btype_T; 1132 1133 typedef struct { 1134 btype_T bv_type; 1135 long bv_nr; 1136 char_u *bv_string; 1137 int bv_len; /* length of bv_string */ 1138 int bv_allocated; /* bv_string was allocated */ 1139 } bval_T; 1140 1141 /* 1142 * Values for do_tag(). 1143 */ 1144 #define DT_TAG 1 /* jump to newer position or same tag again */ 1145 #define DT_POP 2 /* jump to older position */ 1146 #define DT_NEXT 3 /* jump to next match of same tag */ 1147 #define DT_PREV 4 /* jump to previous match of same tag */ 1148 #define DT_FIRST 5 /* jump to first match of same tag */ 1149 #define DT_LAST 6 /* jump to first match of same tag */ 1150 #define DT_SELECT 7 /* jump to selection from list */ 1151 #define DT_HELP 8 /* like DT_TAG, but no wildcards */ 1152 #define DT_JUMP 9 /* jump to new tag or selection from list */ 1153 #define DT_CSCOPE 10 /* cscope find command (like tjump) */ 1154 #define DT_LTAG 11 /* tag using location list */ 1155 #define DT_FREE 99 /* free cached matches */ 1156 1157 /* 1158 * flags for find_tags(). 1159 */ 1160 #define TAG_HELP 1 /* only search for help tags */ 1161 #define TAG_NAMES 2 /* only return name of tag */ 1162 #define TAG_REGEXP 4 /* use tag pattern as regexp */ 1163 #define TAG_NOIC 8 /* don't always ignore case */ 1164 #ifdef FEAT_CSCOPE 1165 # define TAG_CSCOPE 16 /* cscope tag */ 1166 #endif 1167 #define TAG_VERBOSE 32 /* message verbosity */ 1168 #define TAG_INS_COMP 64 /* Currently doing insert completion */ 1169 #define TAG_KEEP_LANG 128 /* keep current language */ 1170 1171 #define TAG_MANY 300 /* When finding many tags (for completion), 1172 find up to this many tags */ 1173 1174 /* 1175 * Types of dialogs passed to do_vim_dialog(). 1176 */ 1177 #define VIM_GENERIC 0 1178 #define VIM_ERROR 1 1179 #define VIM_WARNING 2 1180 #define VIM_INFO 3 1181 #define VIM_QUESTION 4 1182 #define VIM_LAST_TYPE 4 /* sentinel value */ 1183 1184 /* 1185 * Return values for functions like gui_yesnocancel() 1186 */ 1187 #define VIM_YES 2 1188 #define VIM_NO 3 1189 #define VIM_CANCEL 4 1190 #define VIM_ALL 5 1191 #define VIM_DISCARDALL 6 1192 1193 /* 1194 * arguments for win_split() 1195 */ 1196 #define WSP_ROOM 1 /* require enough room */ 1197 #define WSP_VERT 2 /* split vertically */ 1198 #define WSP_TOP 4 /* window at top-left of shell */ 1199 #define WSP_BOT 8 /* window at bottom-right of shell */ 1200 #define WSP_HELP 16 /* creating the help window */ 1201 #define WSP_BELOW 32 /* put new window below/right */ 1202 #define WSP_ABOVE 64 /* put new window above/left */ 1203 #define WSP_NEWLOC 128 /* don't copy location list */ 1204 1205 /* 1206 * arguments for gui_set_shellsize() 1207 */ 1208 #define RESIZE_VERT 1 /* resize vertically */ 1209 #define RESIZE_HOR 2 /* resize horizontally */ 1210 #define RESIZE_BOTH 15 /* resize in both directions */ 1211 1212 /* 1213 * flags for check_changed() 1214 */ 1215 #define CCGD_AW 1 /* do autowrite if buffer was changed */ 1216 #define CCGD_MULTWIN 2 /* check also when several wins for the buf */ 1217 #define CCGD_FORCEIT 4 /* ! used */ 1218 #define CCGD_ALLBUF 8 /* may write all buffers */ 1219 #define CCGD_EXCMD 16 /* may suggest using ! */ 1220 1221 /* 1222 * "flags" values for option-setting functions. 1223 * When OPT_GLOBAL and OPT_LOCAL are both missing, set both local and global 1224 * values, get local value. 1225 */ 1226 #define OPT_FREE 1 /* free old value if it was allocated */ 1227 #define OPT_GLOBAL 2 /* use global value */ 1228 #define OPT_LOCAL 4 /* use local value */ 1229 #define OPT_MODELINE 8 /* option in modeline */ 1230 #define OPT_WINONLY 16 /* only set window-local options */ 1231 #define OPT_NOWIN 32 /* don't set window-local options */ 1232 1233 /* Magic chars used in confirm dialog strings */ 1234 #define DLG_BUTTON_SEP '\n' 1235 #define DLG_HOTKEY_CHAR '&' 1236 1237 /* Values for "starting" */ 1238 #define NO_SCREEN 2 /* no screen updating yet */ 1239 #define NO_BUFFERS 1 /* not all buffers loaded yet */ 1240 /* 0 not starting anymore */ 1241 1242 /* Values for swap_exists_action: what to do when swap file already exists */ 1243 #define SEA_NONE 0 /* don't use dialog */ 1244 #define SEA_DIALOG 1 /* use dialog when possible */ 1245 #define SEA_QUIT 2 /* quit editing the file */ 1246 #define SEA_RECOVER 3 /* recover the file */ 1247 1248 /* 1249 * Minimal size for block 0 of a swap file. 1250 * NOTE: This depends on size of struct block0! It's not done with a sizeof(), 1251 * because struct block0 is defined in memline.c (Sorry). 1252 * The maximal block size is arbitrary. 1253 */ 1254 #define MIN_SWAP_PAGE_SIZE 1048 1255 #define MAX_SWAP_PAGE_SIZE 50000 1256 1257 /* Special values for current_SID. */ 1258 #define SID_MODELINE -1 /* when using a modeline */ 1259 #define SID_CMDARG -2 /* for "--cmd" argument */ 1260 #define SID_CARG -3 /* for "-c" argument */ 1261 #define SID_ENV -4 /* for sourcing environment variable */ 1262 #define SID_ERROR -5 /* option was reset because of an error */ 1263 #define SID_NONE -6 /* don't set scriptID */ 1264 1265 /* 1266 * Events for autocommands. 1267 */ 1268 enum auto_event 1269 { 1270 EVENT_BUFADD = 0, /* after adding a buffer to the buffer list */ 1271 EVENT_BUFNEW, /* after creating any buffer */ 1272 EVENT_BUFDELETE, /* deleting a buffer from the buffer list */ 1273 EVENT_BUFWIPEOUT, /* just before really deleting a buffer */ 1274 EVENT_BUFENTER, /* after entering a buffer */ 1275 EVENT_BUFFILEPOST, /* after renaming a buffer */ 1276 EVENT_BUFFILEPRE, /* before renaming a buffer */ 1277 EVENT_BUFLEAVE, /* before leaving a buffer */ 1278 EVENT_BUFNEWFILE, /* when creating a buffer for a new file */ 1279 EVENT_BUFREADPOST, /* after reading a buffer */ 1280 EVENT_BUFREADPRE, /* before reading a buffer */ 1281 EVENT_BUFREADCMD, /* read buffer using command */ 1282 EVENT_BUFUNLOAD, /* just before unloading a buffer */ 1283 EVENT_BUFHIDDEN, /* just after buffer becomes hidden */ 1284 EVENT_BUFWINENTER, /* after showing a buffer in a window */ 1285 EVENT_BUFWINLEAVE, /* just after buffer removed from window */ 1286 EVENT_BUFWRITEPOST, /* after writing a buffer */ 1287 EVENT_BUFWRITEPRE, /* before writing a buffer */ 1288 EVENT_BUFWRITECMD, /* write buffer using command */ 1289 EVENT_CMDWINENTER, /* after entering the cmdline window */ 1290 EVENT_CMDWINLEAVE, /* before leaving the cmdline window */ 1291 EVENT_COLORSCHEME, /* after loading a colorscheme */ 1292 EVENT_COMPLETEDONE, /* after finishing insert complete */ 1293 EVENT_FILEAPPENDPOST, /* after appending to a file */ 1294 EVENT_FILEAPPENDPRE, /* before appending to a file */ 1295 EVENT_FILEAPPENDCMD, /* append to a file using command */ 1296 EVENT_FILECHANGEDSHELL, /* after shell command that changed file */ 1297 EVENT_FILECHANGEDSHELLPOST, /* after (not) reloading changed file */ 1298 EVENT_FILECHANGEDRO, /* before first change to read-only file */ 1299 EVENT_FILEREADPOST, /* after reading a file */ 1300 EVENT_FILEREADPRE, /* before reading a file */ 1301 EVENT_FILEREADCMD, /* read from a file using command */ 1302 EVENT_FILETYPE, /* new file type detected (user defined) */ 1303 EVENT_FILEWRITEPOST, /* after writing a file */ 1304 EVENT_FILEWRITEPRE, /* before writing a file */ 1305 EVENT_FILEWRITECMD, /* write to a file using command */ 1306 EVENT_FILTERREADPOST, /* after reading from a filter */ 1307 EVENT_FILTERREADPRE, /* before reading from a filter */ 1308 EVENT_FILTERWRITEPOST, /* after writing to a filter */ 1309 EVENT_FILTERWRITEPRE, /* before writing to a filter */ 1310 EVENT_FOCUSGAINED, /* got the focus */ 1311 EVENT_FOCUSLOST, /* lost the focus to another app */ 1312 EVENT_GUIENTER, /* after starting the GUI */ 1313 EVENT_GUIFAILED, /* after starting the GUI failed */ 1314 EVENT_INSERTCHANGE, /* when changing Insert/Replace mode */ 1315 EVENT_INSERTENTER, /* when entering Insert mode */ 1316 EVENT_INSERTLEAVE, /* when leaving Insert mode */ 1317 EVENT_MENUPOPUP, /* just before popup menu is displayed */ 1318 EVENT_QUICKFIXCMDPOST, /* after :make, :grep etc. */ 1319 EVENT_QUICKFIXCMDPRE, /* before :make, :grep etc. */ 1320 EVENT_QUITPRE, /* before :quit */ 1321 EVENT_SESSIONLOADPOST, /* after loading a session file */ 1322 EVENT_STDINREADPOST, /* after reading from stdin */ 1323 EVENT_STDINREADPRE, /* before reading from stdin */ 1324 EVENT_SYNTAX, /* syntax selected */ 1325 EVENT_TERMCHANGED, /* after changing 'term' */ 1326 EVENT_TERMRESPONSE, /* after setting "v:termresponse" */ 1327 EVENT_USER, /* user defined autocommand */ 1328 EVENT_VIMENTER, /* after starting Vim */ 1329 EVENT_VIMLEAVE, /* before exiting Vim */ 1330 EVENT_VIMLEAVEPRE, /* before exiting Vim and writing .viminfo */ 1331 EVENT_VIMRESIZED, /* after Vim window was resized */ 1332 EVENT_WINENTER, /* after entering a window */ 1333 EVENT_WINLEAVE, /* before leaving a window */ 1334 EVENT_WINNEW, /* when entering a new window */ 1335 EVENT_ENCODINGCHANGED, /* after changing the 'encoding' option */ 1336 EVENT_INSERTCHARPRE, /* before inserting a char */ 1337 EVENT_CURSORHOLD, /* cursor in same position for a while */ 1338 EVENT_CURSORHOLDI, /* idem, in Insert mode */ 1339 EVENT_FUNCUNDEFINED, /* if calling a function which doesn't exist */ 1340 EVENT_REMOTEREPLY, /* upon string reception from a remote vim */ 1341 EVENT_SWAPEXISTS, /* found existing swap file */ 1342 EVENT_SOURCEPRE, /* before sourcing a Vim script */ 1343 EVENT_SOURCECMD, /* sourcing a Vim script using command */ 1344 EVENT_SPELLFILEMISSING, /* spell file missing */ 1345 EVENT_CURSORMOVED, /* cursor was moved */ 1346 EVENT_CURSORMOVEDI, /* cursor was moved in Insert mode */ 1347 EVENT_TABENTER, /* after entering a tab page */ 1348 EVENT_TABLEAVE, /* before leaving a tab page */ 1349 EVENT_TABNEW, /* when entering a new tab page */ 1350 EVENT_TABCLOSED, /* after closing a tab page */ 1351 EVENT_SHELLCMDPOST, /* after ":!cmd" */ 1352 EVENT_SHELLFILTERPOST, /* after ":1,2!cmd", ":w !cmd", ":r !cmd". */ 1353 EVENT_TEXTCHANGED, /* text was modified */ 1354 EVENT_TEXTCHANGEDI, /* text was modified in Insert mode*/ 1355 EVENT_CMDUNDEFINED, /* command undefined */ 1356 EVENT_OPTIONSET, /* option was set */ 1357 NUM_EVENTS /* MUST be the last one */ 1358 }; 1359 1360 typedef enum auto_event event_T; 1361 1362 /* 1363 * Values for index in highlight_attr[]. 1364 * When making changes, also update HL_FLAGS below! And update the default 1365 * value of 'highlight' in option.c. 1366 */ 1367 typedef enum 1368 { 1369 HLF_8 = 0 /* Meta & special keys listed with ":map", text that is 1370 displayed different from what it is */ 1371 , HLF_EOB /* after the last line in the buffer */ 1372 , HLF_AT /* @ characters at end of screen, characters that 1373 don't really exist in the text */ 1374 , HLF_D /* directories in CTRL-D listing */ 1375 , HLF_E /* error messages */ 1376 , HLF_H /* obsolete, ignored */ 1377 , HLF_I /* incremental search */ 1378 , HLF_L /* last search string */ 1379 , HLF_M /* "--More--" message */ 1380 , HLF_CM /* Mode (e.g., "-- INSERT --") */ 1381 , HLF_N /* line number for ":number" and ":#" commands */ 1382 , HLF_CLN /* current line number */ 1383 , HLF_R /* return to continue message and yes/no questions */ 1384 , HLF_S /* status lines */ 1385 , HLF_SNC /* status lines of not-current windows */ 1386 , HLF_C /* column to separate vertically split windows */ 1387 , HLF_T /* Titles for output from ":set all", ":autocmd" etc. */ 1388 , HLF_V /* Visual mode */ 1389 , HLF_VNC /* Visual mode, autoselecting and not clipboard owner */ 1390 , HLF_W /* warning messages */ 1391 , HLF_WM /* Wildmenu highlight */ 1392 , HLF_FL /* Folded line */ 1393 , HLF_FC /* Fold column */ 1394 , HLF_ADD /* Added diff line */ 1395 , HLF_CHD /* Changed diff line */ 1396 , HLF_DED /* Deleted diff line */ 1397 , HLF_TXD /* Text Changed in diff line */ 1398 , HLF_CONCEAL /* Concealed text */ 1399 , HLF_SC /* Sign column */ 1400 , HLF_SPB /* SpellBad */ 1401 , HLF_SPC /* SpellCap */ 1402 , HLF_SPR /* SpellRare */ 1403 , HLF_SPL /* SpellLocal */ 1404 , HLF_PNI /* popup menu normal item */ 1405 , HLF_PSI /* popup menu selected item */ 1406 , HLF_PSB /* popup menu scrollbar */ 1407 , HLF_PST /* popup menu scrollbar thumb */ 1408 , HLF_TP /* tabpage line */ 1409 , HLF_TPS /* tabpage line selected */ 1410 , HLF_TPF /* tabpage line filler */ 1411 , HLF_CUC /* 'cursurcolumn' */ 1412 , HLF_CUL /* 'cursurline' */ 1413 , HLF_MC /* 'colorcolumn' */ 1414 , HLF_COUNT /* MUST be the last one */ 1415 } hlf_T; 1416 1417 /* The HL_FLAGS must be in the same order as the HLF_ enums! 1418 * When changing this also adjust the default for 'highlight'. */ 1419 #define HL_FLAGS {'8', '~', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \ 1420 'n', 'N', 'r', 's', 'S', 'c', 't', 'v', 'V', 'w', 'W', \ 1421 'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \ 1422 'B', 'P', 'R', 'L', \ 1423 '+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o'} 1424 1425 /* 1426 * Boolean constants 1427 */ 1428 #ifndef TRUE 1429 # define FALSE 0 /* note: this is an int, not a long! */ 1430 # define TRUE 1 1431 #endif 1432 1433 #define MAYBE 2 /* sometimes used for a variant on TRUE */ 1434 1435 #ifndef UINT32_T 1436 typedef UINT32_TYPEDEF UINT32_T; 1437 #endif 1438 1439 /* 1440 * Operator IDs; The order must correspond to opchars[] in ops.c! 1441 */ 1442 #define OP_NOP 0 /* no pending operation */ 1443 #define OP_DELETE 1 /* "d" delete operator */ 1444 #define OP_YANK 2 /* "y" yank operator */ 1445 #define OP_CHANGE 3 /* "c" change operator */ 1446 #define OP_LSHIFT 4 /* "<" left shift operator */ 1447 #define OP_RSHIFT 5 /* ">" right shift operator */ 1448 #define OP_FILTER 6 /* "!" filter operator */ 1449 #define OP_TILDE 7 /* "g~" switch case operator */ 1450 #define OP_INDENT 8 /* "=" indent operator */ 1451 #define OP_FORMAT 9 /* "gq" format operator */ 1452 #define OP_COLON 10 /* ":" colon operator */ 1453 #define OP_UPPER 11 /* "gU" make upper case operator */ 1454 #define OP_LOWER 12 /* "gu" make lower case operator */ 1455 #define OP_JOIN 13 /* "J" join operator, only for Visual mode */ 1456 #define OP_JOIN_NS 14 /* "gJ" join operator, only for Visual mode */ 1457 #define OP_ROT13 15 /* "g?" rot-13 encoding */ 1458 #define OP_REPLACE 16 /* "r" replace chars, only for Visual mode */ 1459 #define OP_INSERT 17 /* "I" Insert column, only for Visual mode */ 1460 #define OP_APPEND 18 /* "A" Append column, only for Visual mode */ 1461 #define OP_FOLD 19 /* "zf" define a fold */ 1462 #define OP_FOLDOPEN 20 /* "zo" open folds */ 1463 #define OP_FOLDOPENREC 21 /* "zO" open folds recursively */ 1464 #define OP_FOLDCLOSE 22 /* "zc" close folds */ 1465 #define OP_FOLDCLOSEREC 23 /* "zC" close folds recursively */ 1466 #define OP_FOLDDEL 24 /* "zd" delete folds */ 1467 #define OP_FOLDDELREC 25 /* "zD" delete folds recursively */ 1468 #define OP_FORMAT2 26 /* "gw" format operator, keeps cursor pos */ 1469 #define OP_FUNCTION 27 /* "g@" call 'operatorfunc' */ 1470 #define OP_NR_ADD 28 /* "<C-A>" Add to the number or alphabetic 1471 character (OP_ADD conflicts with Perl) */ 1472 #define OP_NR_SUB 29 /* "<C-X>" Subtract from the number or 1473 alphabetic character */ 1474 1475 /* 1476 * Motion types, used for operators and for yank/delete registers. 1477 */ 1478 #define MCHAR 0 /* character-wise movement/register */ 1479 #define MLINE 1 /* line-wise movement/register */ 1480 #define MBLOCK 2 /* block-wise register */ 1481 1482 #define MAUTO 0xff /* Decide between MLINE/MCHAR */ 1483 1484 /* 1485 * Minimum screen size 1486 */ 1487 #define MIN_COLUMNS 12 /* minimal columns for screen */ 1488 #define MIN_LINES 2 /* minimal lines for screen */ 1489 #define STATUS_HEIGHT 1 /* height of a status line under a window */ 1490 #define QF_WINHEIGHT 10 /* default height for quickfix window */ 1491 1492 /* 1493 * Buffer sizes 1494 */ 1495 #ifndef CMDBUFFSIZE 1496 # define CMDBUFFSIZE 256 /* size of the command processing buffer */ 1497 #endif 1498 1499 #define LSIZE 512 /* max. size of a line in the tags file */ 1500 1501 #define IOSIZE (1024+1) /* file i/o and sprintf buffer size */ 1502 1503 #define DIALOG_MSG_SIZE 1000 /* buffer size for dialog_msg() */ 1504 1505 #ifdef FEAT_MBYTE 1506 # define MSG_BUF_LEN 480 /* length of buffer for small messages */ 1507 # define MSG_BUF_CLEN (MSG_BUF_LEN / 6) /* cell length (worst case: utf-8 1508 takes 6 bytes for one cell) */ 1509 #else 1510 # define MSG_BUF_LEN 80 /* length of buffer for small messages */ 1511 # define MSG_BUF_CLEN MSG_BUF_LEN /* cell length */ 1512 #endif 1513 1514 #define FOLD_TEXT_LEN 51 /* buffer size for get_foldtext() */ 1515 1516 /* Size of the buffer used for tgetent(). Unfortunately this is largely 1517 * undocumented, some systems use 1024. Using a buffer that is too small 1518 * causes a buffer overrun and a crash. Use the maximum known value to stay 1519 * on the safe side. */ 1520 #define TBUFSZ 2048 /* buffer size for termcap entry */ 1521 1522 /* 1523 * Maximum length of key sequence to be mapped. 1524 * Must be able to hold an Amiga resize report. 1525 */ 1526 #define MAXMAPLEN 50 1527 1528 /* Size in bytes of the hash used in the undo file. */ 1529 #define UNDO_HASH_SIZE 32 1530 1531 #ifdef HAVE_FCNTL_H 1532 # include <fcntl.h> 1533 #endif 1534 1535 #ifdef BINARY_FILE_IO 1536 # define WRITEBIN "wb" /* no CR-LF translation */ 1537 # define READBIN "rb" 1538 # define APPENDBIN "ab" 1539 #else 1540 # define WRITEBIN "w" 1541 # define READBIN "r" 1542 # define APPENDBIN "a" 1543 #endif 1544 1545 /* 1546 * EMX doesn't have a global way of making open() use binary I/O. 1547 * Use O_BINARY for all open() calls. 1548 */ 1549 #if defined(__CYGWIN32__) 1550 # define O_EXTRA O_BINARY 1551 #else 1552 # define O_EXTRA 0 1553 #endif 1554 1555 #ifndef O_NOFOLLOW 1556 # define O_NOFOLLOW 0 1557 #endif 1558 1559 #ifndef W_OK 1560 # define W_OK 2 /* for systems that don't have W_OK in unistd.h */ 1561 #endif 1562 #ifndef R_OK 1563 # define R_OK 4 /* for systems that don't have R_OK in unistd.h */ 1564 #endif 1565 1566 /* 1567 * defines to avoid typecasts from (char_u *) to (char *) and back 1568 * (vim_strchr() and vim_strrchr() are now in alloc.c) 1569 */ 1570 #define STRLEN(s) strlen((char *)(s)) 1571 #define STRCPY(d, s) strcpy((char *)(d), (char *)(s)) 1572 #define STRNCPY(d, s, n) strncpy((char *)(d), (char *)(s), (size_t)(n)) 1573 #define STRCMP(d, s) strcmp((char *)(d), (char *)(s)) 1574 #define STRNCMP(d, s, n) strncmp((char *)(d), (char *)(s), (size_t)(n)) 1575 #ifdef HAVE_STRCASECMP 1576 # define STRICMP(d, s) strcasecmp((char *)(d), (char *)(s)) 1577 #else 1578 # ifdef HAVE_STRICMP 1579 # define STRICMP(d, s) stricmp((char *)(d), (char *)(s)) 1580 # else 1581 # define STRICMP(d, s) vim_stricmp((char *)(d), (char *)(s)) 1582 # endif 1583 #endif 1584 1585 /* Like strcpy() but allows overlapped source and destination. */ 1586 #define STRMOVE(d, s) mch_memmove((d), (s), STRLEN(s) + 1) 1587 1588 #ifdef HAVE_STRNCASECMP 1589 # define STRNICMP(d, s, n) strncasecmp((char *)(d), (char *)(s), (size_t)(n)) 1590 #else 1591 # ifdef HAVE_STRNICMP 1592 # define STRNICMP(d, s, n) strnicmp((char *)(d), (char *)(s), (size_t)(n)) 1593 # else 1594 # define STRNICMP(d, s, n) vim_strnicmp((char *)(d), (char *)(s), (size_t)(n)) 1595 # endif 1596 #endif 1597 1598 #ifdef FEAT_MBYTE 1599 /* We need to call mb_stricmp() even when we aren't dealing with a multi-byte 1600 * encoding because mb_stricmp() takes care of all ascii and non-ascii 1601 * encodings, including characters with umlauts in latin1, etc., while 1602 * STRICMP() only handles the system locale version, which often does not 1603 * handle non-ascii properly. */ 1604 1605 # define MB_STRICMP(d, s) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)MAXCOL) 1606 # define MB_STRNICMP(d, s, n) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)(n)) 1607 #else 1608 # define MB_STRICMP(d, s) STRICMP((d), (s)) 1609 # define MB_STRNICMP(d, s, n) STRNICMP((d), (s), (n)) 1610 #endif 1611 1612 #define STRCAT(d, s) strcat((char *)(d), (char *)(s)) 1613 #define STRNCAT(d, s, n) strncat((char *)(d), (char *)(s), (size_t)(n)) 1614 1615 #ifdef HAVE_STRPBRK 1616 # define vim_strpbrk(s, cs) (char_u *)strpbrk((char *)(s), (char *)(cs)) 1617 #endif 1618 1619 #define MSG(s) msg((char_u *)(s)) 1620 #define MSG_ATTR(s, attr) msg_attr((char_u *)(s), (attr)) 1621 #define EMSG(s) emsg((char_u *)(s)) 1622 #define EMSG2(s, p) emsg2((char_u *)(s), (char_u *)(p)) 1623 #define EMSG3(s, p, q) emsg3((char_u *)(s), (char_u *)(p), (char_u *)(q)) 1624 #define EMSGN(s, n) emsgn((char_u *)(s), (long)(n)) 1625 #define EMSGU(s, n) emsgu((char_u *)(s), (long_u)(n)) 1626 #define IEMSG(s) iemsg((char_u *)(s)) 1627 #define IEMSG2(s, p) iemsg2((char_u *)(s), (char_u *)(p)) 1628 #define IEMSGN(s, n) iemsgn((char_u *)(s), (long)(n)) 1629 #define OUT_STR(s) out_str((char_u *)(s)) 1630 #define OUT_STR_NF(s) out_str_nf((char_u *)(s)) 1631 #define MSG_PUTS(s) msg_puts((char_u *)(s)) 1632 #define MSG_PUTS_ATTR(s, a) msg_puts_attr((char_u *)(s), (a)) 1633 #define MSG_PUTS_TITLE(s) msg_puts_title((char_u *)(s)) 1634 #define MSG_PUTS_LONG(s) msg_puts_long_attr((char_u *)(s), 0) 1635 #define MSG_PUTS_LONG_ATTR(s, a) msg_puts_long_attr((char_u *)(s), (a)) 1636 1637 #ifdef FEAT_GUI 1638 # ifdef FEAT_TERMGUICOLORS 1639 # define GUI_FUNCTION(f) (gui.in_use ? gui_##f : termgui_##f) 1640 # define GUI_FUNCTION2(f, pixel) (gui.in_use \ 1641 ? ((pixel) != INVALCOLOR \ 1642 ? gui_##f((pixel)) \ 1643 : INVALCOLOR) \ 1644 : termgui_##f((pixel))) 1645 # define USE_24BIT (gui.in_use || p_tgc) 1646 # else 1647 # define GUI_FUNCTION(f) gui_##f 1648 # define GUI_FUNCTION2(f,pixel) ((pixel) != INVALCOLOR \ 1649 ? gui_##f((pixel)) \ 1650 : INVALCOLOR) 1651 # define USE_24BIT gui.in_use 1652 # endif 1653 #else 1654 # ifdef FEAT_TERMGUICOLORS 1655 # define GUI_FUNCTION(f) termgui_##f 1656 # define GUI_FUNCTION2(f, pixel) termgui_##f((pixel)) 1657 # define USE_24BIT p_tgc 1658 # endif 1659 #endif 1660 #ifdef FEAT_TERMGUICOLORS 1661 # define IS_CTERM (t_colors > 1 || p_tgc) 1662 #else 1663 # define IS_CTERM (t_colors > 1) 1664 #endif 1665 #ifdef GUI_FUNCTION 1666 # define GUI_MCH_GET_RGB GUI_FUNCTION(mch_get_rgb) 1667 # define GUI_MCH_GET_RGB2(pixel) GUI_FUNCTION2(mch_get_rgb, (pixel)) 1668 # define GUI_MCH_GET_COLOR GUI_FUNCTION(mch_get_color) 1669 # define GUI_GET_COLOR GUI_FUNCTION(get_color) 1670 #endif 1671 1672 /* Prefer using emsg3(), because perror() may send the output to the wrong 1673 * destination and mess up the screen. */ 1674 #ifdef HAVE_STRERROR 1675 # define PERROR(msg) (void)emsg3((char_u *)"%s: %s", (char_u *)msg, (char_u *)strerror(errno)) 1676 #else 1677 # define PERROR(msg) do_perror(msg) 1678 #endif 1679 1680 typedef long linenr_T; /* line number type */ 1681 typedef int colnr_T; /* column number type */ 1682 typedef unsigned short disptick_T; /* display tick type */ 1683 1684 #define MAXLNUM (0x7fffffffL) /* maximum (invalid) line number */ 1685 1686 /* 1687 * Well, you won't believe it, but some S/390 machines ("host", now also known 1688 * as zServer) use 31 bit pointers. There are also some newer machines, that 1689 * use 64 bit pointers. I don't know how to distinguish between 31 and 64 bit 1690 * machines, so the best way is to assume 31 bits whenever we detect OS/390 1691 * Unix. 1692 * With this we restrict the maximum line length to 1073741823. I guess this is 1693 * not a real problem. BTW: Longer lines are split. 1694 */ 1695 #if VIM_SIZEOF_INT >= 4 1696 # ifdef __MVS__ 1697 # define MAXCOL (0x3fffffffL) /* maximum column number, 30 bits */ 1698 # else 1699 # define MAXCOL (0x7fffffffL) /* maximum column number, 31 bits */ 1700 # endif 1701 #else 1702 # define MAXCOL (0x7fff) /* maximum column number, 15 bits */ 1703 #endif 1704 1705 #define SHOWCMD_COLS 10 /* columns needed by shown command */ 1706 #define STL_MAX_ITEM 80 /* max nr of %<flag> in statusline */ 1707 1708 typedef void *vim_acl_T; /* dummy to pass an ACL to a function */ 1709 1710 /* 1711 * Include a prototype for mch_memmove(), it may not be in alloc.pro. 1712 */ 1713 #ifdef VIM_MEMMOVE 1714 void mch_memmove(void *, void *, size_t); 1715 #else 1716 # ifndef mch_memmove 1717 # define mch_memmove(to, from, len) memmove(to, from, len) 1718 # endif 1719 #endif 1720 1721 /* 1722 * fnamecmp() is used to compare file names. 1723 * On some systems case in a file name does not matter, on others it does. 1724 * (this does not account for maximum name lengths and things like "../dir", 1725 * thus it is not 100% accurate!) 1726 */ 1727 #define fnamecmp(x, y) vim_fnamecmp((char_u *)(x), (char_u *)(y)) 1728 #define fnamencmp(x, y, n) vim_fnamencmp((char_u *)(x), (char_u *)(y), (size_t)(n)) 1729 1730 #ifdef HAVE_MEMSET 1731 # define vim_memset(ptr, c, size) memset((ptr), (c), (size)) 1732 #else 1733 void *vim_memset(void *, int, size_t); 1734 #endif 1735 1736 #if defined(UNIX) || defined(FEAT_GUI) || defined(VMS) \ 1737 || defined(FEAT_CLIENTSERVER) 1738 # define USE_INPUT_BUF 1739 #endif 1740 1741 #ifndef EINTR 1742 # define read_eintr(fd, buf, count) vim_read((fd), (buf), (count)) 1743 # define write_eintr(fd, buf, count) vim_write((fd), (buf), (count)) 1744 #endif 1745 1746 #ifdef MSWIN 1747 /* On MS-Windows the third argument isn't size_t. This matters for Win64, 1748 * where sizeof(size_t)==8, not 4 */ 1749 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (unsigned int)(count)) 1750 # define vim_write(fd, buf, count) write((fd), (char *)(buf), (unsigned int)(count)) 1751 #else 1752 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (size_t) (count)) 1753 # define vim_write(fd, buf, count) write((fd), (char *)(buf), (size_t) (count)) 1754 #endif 1755 1756 /* 1757 * Enums need a typecast to be used as array index (for Ultrix). 1758 */ 1759 #define hl_attr(n) highlight_attr[(int)(n)] 1760 #define term_str(n) term_strings[(int)(n)] 1761 1762 /* 1763 * vim_iswhite() is used for "^" and the like. It differs from isspace() 1764 * because it doesn't include <CR> and <LF> and the like. 1765 */ 1766 #define vim_iswhite(x) ((x) == ' ' || (x) == '\t') 1767 1768 /* 1769 * EXTERN is only defined in main.c. That's where global variables are 1770 * actually defined and initialized. 1771 */ 1772 #ifndef EXTERN 1773 # define EXTERN extern 1774 # define INIT(x) 1775 #else 1776 # ifndef INIT 1777 # define INIT(x) x 1778 # define DO_INIT 1779 # define COMMA , 1780 # endif 1781 #endif 1782 1783 #ifdef FEAT_MBYTE 1784 # define MAX_MCO 6 /* maximum value for 'maxcombine' */ 1785 1786 /* Maximum number of bytes in a multi-byte character. It can be one 32-bit 1787 * character of up to 6 bytes, or one 16-bit character of up to three bytes 1788 * plus six following composing characters of three bytes each. */ 1789 # define MB_MAXBYTES 21 1790 #else 1791 # define MB_MAXBYTES 1 1792 #endif 1793 1794 #if (defined(FEAT_PROFILE) || defined(FEAT_RELTIME)) && !defined(PROTO) 1795 # ifdef WIN3264 1796 typedef LARGE_INTEGER proftime_T; 1797 # else 1798 typedef struct timeval proftime_T; 1799 # endif 1800 #else 1801 typedef int proftime_T; /* dummy for function prototypes */ 1802 #endif 1803 1804 /* 1805 * When compiling with 32 bit Perl time_t is 32 bits in the Perl code but 64 1806 * bits elsewhere. That causes memory corruption. Define time_T and use it 1807 * for global variables to avoid that. 1808 */ 1809 #ifdef PROTO 1810 typedef long time_T; 1811 #else 1812 # ifdef WIN3264 1813 typedef __time64_t time_T; 1814 # else 1815 typedef time_t time_T; 1816 # endif 1817 #endif 1818 1819 #ifdef _WIN64 1820 typedef __int64 sock_T; 1821 #else 1822 typedef int sock_T; 1823 #endif 1824 1825 /* Include option.h before structs.h, because the number of window-local and 1826 * buffer-local options is used there. */ 1827 #include "option.h" /* options and default values */ 1828 1829 /* Note that gui.h is included by structs.h */ 1830 1831 #include "structs.h" /* file that defines many structures */ 1832 1833 #include "alloc.h" 1834 1835 /* Values for "do_profiling". */ 1836 #define PROF_NONE 0 /* profiling not started */ 1837 #define PROF_YES 1 /* profiling busy */ 1838 #define PROF_PAUSED 2 /* profiling paused */ 1839 1840 #ifdef FEAT_MOUSE 1841 1842 /* Codes for mouse button events in lower three bits: */ 1843 # define MOUSE_LEFT 0x00 1844 # define MOUSE_MIDDLE 0x01 1845 # define MOUSE_RIGHT 0x02 1846 # define MOUSE_RELEASE 0x03 1847 1848 /* bit masks for modifiers: */ 1849 # define MOUSE_SHIFT 0x04 1850 # define MOUSE_ALT 0x08 1851 # define MOUSE_CTRL 0x10 1852 1853 /* mouse buttons that are handled like a key press (GUI only) */ 1854 /* Note that the scroll wheel keys are inverted: MOUSE_5 scrolls lines up but 1855 * the result of this is that the window moves down, similarly MOUSE_6 scrolls 1856 * columns left but the window moves right. */ 1857 # define MOUSE_4 0x100 /* scroll wheel down */ 1858 # define MOUSE_5 0x200 /* scroll wheel up */ 1859 1860 # define MOUSE_X1 0x300 /* Mouse-button X1 (6th) */ 1861 # define MOUSE_X2 0x400 /* Mouse-button X2 */ 1862 1863 # define MOUSE_6 0x500 /* scroll wheel left */ 1864 # define MOUSE_7 0x600 /* scroll wheel right */ 1865 1866 /* 0x20 is reserved by xterm */ 1867 # define MOUSE_DRAG_XTERM 0x40 1868 1869 # define MOUSE_DRAG (0x40 | MOUSE_RELEASE) 1870 1871 /* Lowest button code for using the mouse wheel (xterm only) */ 1872 # define MOUSEWHEEL_LOW 0x60 1873 1874 # define MOUSE_CLICK_MASK 0x03 1875 1876 # define NUM_MOUSE_CLICKS(code) \ 1877 (((unsigned)((code) & 0xC0) >> 6) + 1) 1878 1879 # define SET_NUM_MOUSE_CLICKS(code, num) \ 1880 (code) = ((code) & 0x3f) | ((((num) - 1) & 3) << 6) 1881 1882 /* Added to mouse column for GUI when 'mousefocus' wants to give focus to a 1883 * window by simulating a click on its status line. We could use up to 128 * 1884 * 128 = 16384 columns, now it's reduced to 10000. */ 1885 # define MOUSE_COLOFF 10000 1886 1887 /* 1888 * jump_to_mouse() returns one of first four these values, possibly with 1889 * some of the other three added. 1890 */ 1891 # define IN_UNKNOWN 0 1892 # define IN_BUFFER 1 1893 # define IN_STATUS_LINE 2 /* on status or command line */ 1894 # define IN_SEP_LINE 4 /* on vertical separator line */ 1895 # define IN_OTHER_WIN 8 /* in other window but can't go there */ 1896 # define CURSOR_MOVED 0x100 1897 # define MOUSE_FOLD_CLOSE 0x200 /* clicked on '-' in fold column */ 1898 # define MOUSE_FOLD_OPEN 0x400 /* clicked on '+' in fold column */ 1899 1900 /* flags for jump_to_mouse() */ 1901 # define MOUSE_FOCUS 0x01 /* need to stay in this window */ 1902 # define MOUSE_MAY_VIS 0x02 /* may start Visual mode */ 1903 # define MOUSE_DID_MOVE 0x04 /* only act when mouse has moved */ 1904 # define MOUSE_SETPOS 0x08 /* only set current mouse position */ 1905 # define MOUSE_MAY_STOP_VIS 0x10 /* may stop Visual mode */ 1906 # define MOUSE_RELEASED 0x20 /* button was released */ 1907 1908 # if defined(UNIX) && defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) 1909 # define CHECK_DOUBLE_CLICK 1 /* Checking for double clicks ourselves. */ 1910 # endif 1911 1912 #endif /* FEAT_MOUSE */ 1913 1914 /* defines for eval_vars() */ 1915 #define VALID_PATH 1 1916 #define VALID_HEAD 2 1917 1918 /* Defines for Vim variables. These must match vimvars[] in eval.c! */ 1919 #define VV_COUNT 0 1920 #define VV_COUNT1 1 1921 #define VV_PREVCOUNT 2 1922 #define VV_ERRMSG 3 1923 #define VV_WARNINGMSG 4 1924 #define VV_STATUSMSG 5 1925 #define VV_SHELL_ERROR 6 1926 #define VV_THIS_SESSION 7 1927 #define VV_VERSION 8 1928 #define VV_LNUM 9 1929 #define VV_TERMRESPONSE 10 1930 #define VV_FNAME 11 1931 #define VV_LANG 12 1932 #define VV_LC_TIME 13 1933 #define VV_CTYPE 14 1934 #define VV_CC_FROM 15 1935 #define VV_CC_TO 16 1936 #define VV_FNAME_IN 17 1937 #define VV_FNAME_OUT 18 1938 #define VV_FNAME_NEW 19 1939 #define VV_FNAME_DIFF 20 1940 #define VV_CMDARG 21 1941 #define VV_FOLDSTART 22 1942 #define VV_FOLDEND 23 1943 #define VV_FOLDDASHES 24 1944 #define VV_FOLDLEVEL 25 1945 #define VV_PROGNAME 26 1946 #define VV_SEND_SERVER 27 1947 #define VV_DYING 28 1948 #define VV_EXCEPTION 29 1949 #define VV_THROWPOINT 30 1950 #define VV_REG 31 1951 #define VV_CMDBANG 32 1952 #define VV_INSERTMODE 33 1953 #define VV_VAL 34 1954 #define VV_KEY 35 1955 #define VV_PROFILING 36 1956 #define VV_FCS_REASON 37 1957 #define VV_FCS_CHOICE 38 1958 #define VV_BEVAL_BUFNR 39 1959 #define VV_BEVAL_WINNR 40 1960 #define VV_BEVAL_WINID 41 1961 #define VV_BEVAL_LNUM 42 1962 #define VV_BEVAL_COL 43 1963 #define VV_BEVAL_TEXT 44 1964 #define VV_SCROLLSTART 45 1965 #define VV_SWAPNAME 46 1966 #define VV_SWAPCHOICE 47 1967 #define VV_SWAPCOMMAND 48 1968 #define VV_CHAR 49 1969 #define VV_MOUSE_WIN 50 1970 #define VV_MOUSE_WINID 51 1971 #define VV_MOUSE_LNUM 52 1972 #define VV_MOUSE_COL 53 1973 #define VV_OP 54 1974 #define VV_SEARCHFORWARD 55 1975 #define VV_HLSEARCH 56 1976 #define VV_OLDFILES 57 1977 #define VV_WINDOWID 58 1978 #define VV_PROGPATH 59 1979 #define VV_COMPLETED_ITEM 60 1980 #define VV_OPTION_NEW 61 1981 #define VV_OPTION_OLD 62 1982 #define VV_OPTION_TYPE 63 1983 #define VV_ERRORS 64 1984 #define VV_FALSE 65 1985 #define VV_TRUE 66 1986 #define VV_NULL 67 1987 #define VV_NONE 68 1988 #define VV_VIM_DID_ENTER 69 1989 #define VV_TESTING 70 1990 #define VV_TYPE_NUMBER 71 1991 #define VV_TYPE_STRING 72 1992 #define VV_TYPE_FUNC 73 1993 #define VV_TYPE_LIST 74 1994 #define VV_TYPE_DICT 75 1995 #define VV_TYPE_FLOAT 76 1996 #define VV_TYPE_BOOL 77 1997 #define VV_TYPE_NONE 78 1998 #define VV_TYPE_JOB 79 1999 #define VV_TYPE_CHANNEL 80 2000 #define VV_LEN 81 /* number of v: vars */ 2001 2002 /* used for v_number in VAR_SPECIAL */ 2003 #define VVAL_FALSE 0L 2004 #define VVAL_TRUE 1L 2005 #define VVAL_NONE 2L 2006 #define VVAL_NULL 3L 2007 2008 /* Type values for type(). */ 2009 #define VAR_TYPE_NUMBER 0 2010 #define VAR_TYPE_STRING 1 2011 #define VAR_TYPE_FUNC 2 2012 #define VAR_TYPE_LIST 3 2013 #define VAR_TYPE_DICT 4 2014 #define VAR_TYPE_FLOAT 5 2015 #define VAR_TYPE_BOOL 6 2016 #define VAR_TYPE_NONE 7 2017 #define VAR_TYPE_JOB 8 2018 #define VAR_TYPE_CHANNEL 9 2019 2020 #ifdef FEAT_CLIPBOARD 2021 2022 /* VIM_ATOM_NAME is the older Vim-specific selection type for X11. Still 2023 * supported for when a mix of Vim versions is used. VIMENC_ATOM_NAME includes 2024 * the encoding to support Vims using different 'encoding' values. */ 2025 # define VIM_ATOM_NAME "_VIM_TEXT" 2026 # define VIMENC_ATOM_NAME "_VIMENC_TEXT" 2027 2028 /* Selection states for modeless selection */ 2029 # define SELECT_CLEARED 0 2030 # define SELECT_IN_PROGRESS 1 2031 # define SELECT_DONE 2 2032 2033 # define SELECT_MODE_CHAR 0 2034 # define SELECT_MODE_WORD 1 2035 # define SELECT_MODE_LINE 2 2036 2037 # ifdef FEAT_GUI_W32 2038 # ifdef FEAT_OLE 2039 # define WM_OLE (WM_APP+0) 2040 # endif 2041 # endif 2042 2043 /* Info about selected text */ 2044 typedef struct VimClipboard 2045 { 2046 int available; /* Is clipboard available? */ 2047 int owned; /* Flag: do we own the selection? */ 2048 pos_T start; /* Start of selected area */ 2049 pos_T end; /* End of selected area */ 2050 int vmode; /* Visual mode character */ 2051 2052 /* Fields for selection that doesn't use Visual mode */ 2053 short_u origin_row; 2054 short_u origin_start_col; 2055 short_u origin_end_col; 2056 short_u word_start_col; 2057 short_u word_end_col; 2058 2059 pos_T prev; /* Previous position */ 2060 short_u state; /* Current selection state */ 2061 short_u mode; /* Select by char, word, or line. */ 2062 2063 # if defined(FEAT_GUI_X11) || defined(FEAT_XCLIPBOARD) 2064 Atom sel_atom; /* PRIMARY/CLIPBOARD selection ID */ 2065 # endif 2066 2067 # ifdef FEAT_GUI_GTK 2068 GdkAtom gtk_sel_atom; /* PRIMARY/CLIPBOARD selection ID */ 2069 # endif 2070 2071 # if defined(MSWIN) || defined(FEAT_CYGWIN_WIN32_CLIPBOARD) 2072 int_u format; /* Vim's own special clipboard format */ 2073 int_u format_raw; /* Vim's raw text clipboard format */ 2074 # endif 2075 } VimClipboard; 2076 #else 2077 typedef int VimClipboard; /* This is required for the prototypes. */ 2078 #endif 2079 2080 #ifdef __BORLANDC__ 2081 /* work around a bug in the Borland 'stat' function: */ 2082 # include <io.h> /* for access() */ 2083 2084 # define stat(a,b) (access(a,0) ? -1 : stat(a,b)) 2085 #endif 2086 2087 /* Use 64-bit stat structure if available. */ 2088 #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) 2089 # define HAVE_STAT64 2090 typedef struct _stat64 stat_T; 2091 #else 2092 typedef struct stat stat_T; 2093 #endif 2094 2095 typedef enum 2096 { 2097 ASSERT_EQUAL, 2098 ASSERT_NOTEQUAL, 2099 ASSERT_MATCH, 2100 ASSERT_NOTMATCH, 2101 ASSERT_OTHER 2102 } assert_type_T; 2103 2104 #include "ex_cmds.h" /* Ex command defines */ 2105 #include "spell.h" /* spell checking stuff */ 2106 2107 #include "proto.h" /* function prototypes */ 2108 2109 /* This has to go after the include of proto.h, as proto/gui.pro declares 2110 * functions of these names. The declarations would break if the defines had 2111 * been seen at that stage. But it must be before globals.h, where error_ga 2112 * is declared. */ 2113 #if !defined(FEAT_GUI_W32) && !defined(FEAT_GUI_X11) \ 2114 && !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_MAC) && !defined(PROTO) 2115 # define mch_errmsg(str) fprintf(stderr, "%s", (str)) 2116 # define display_errors() fflush(stderr) 2117 # define mch_msg(str) printf("%s", (str)) 2118 #else 2119 # define USE_MCH_ERRMSG 2120 #endif 2121 2122 #ifndef FEAT_MBYTE 2123 # define after_pathsep(b, p) vim_ispathsep(*((p) - 1)) 2124 # define transchar_byte(c) transchar(c) 2125 #endif 2126 2127 #ifndef FEAT_LINEBREAK 2128 /* Without the 'numberwidth' option line numbers are always 7 chars. */ 2129 # define number_width(x) 7 2130 #endif 2131 2132 2133 #include "globals.h" /* global variables and messages */ 2134 2135 #ifndef FEAT_VIRTUALEDIT 2136 # define getvvcol(w, p, s, c, e) getvcol(w, p, s, c, e) 2137 # define virtual_active() FALSE 2138 # define virtual_op FALSE 2139 #endif 2140 2141 /* 2142 * If console dialog not supported, but GUI dialog is, use the GUI one. 2143 */ 2144 #if defined(FEAT_GUI_DIALOG) && !defined(FEAT_CON_DIALOG) 2145 # define do_dialog gui_mch_dialog 2146 #endif 2147 2148 /* 2149 * Default filters for gui_mch_browse(). 2150 * The filters are almost system independent. Except for the difference 2151 * between "*" and "*.*" for MSDOS-like systems. 2152 * NOTE: Motif only uses the very first pattern. Therefore 2153 * BROWSE_FILTER_DEFAULT should start with a "*" pattern. 2154 */ 2155 #ifdef FEAT_BROWSE 2156 # ifdef BACKSLASH_IN_FILENAME 2157 # define BROWSE_FILTER_MACROS \ 2158 (char_u *)"Vim macro files (*.vim)\t*.vim\nAll Files (*.*)\t*.*\n" 2159 # define BROWSE_FILTER_ALL_FILES (char_u *)"All Files (*.*)\t*.*\n" 2160 # define BROWSE_FILTER_DEFAULT \ 2161 (char_u *)"All Files (*.*)\t*.*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVB code (*.bas, *.frm)\t*.bas;*.frm\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n" 2162 # else 2163 # define BROWSE_FILTER_MACROS \ 2164 (char_u *)"Vim macro files (*.vim)\t*.vim\nAll Files (*)\t*\n" 2165 # define BROWSE_FILTER_ALL_FILES (char_u *)"All Files (*)\t*\n" 2166 # define BROWSE_FILTER_DEFAULT \ 2167 (char_u *)"All Files (*)\t*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n" 2168 # endif 2169 # define BROWSE_SAVE 1 /* flag for do_browse() */ 2170 # define BROWSE_DIR 2 /* flag for do_browse() */ 2171 #endif 2172 2173 /* stop using fastcall for Borland */ 2174 #if defined(__BORLANDC__) && defined(WIN32) && !defined(DEBUG) 2175 #pragma option -p. 2176 #endif 2177 2178 #ifdef _MSC_VER 2179 /* Avoid useless warning "conversion from X to Y of greater size". */ 2180 #pragma warning(disable : 4312) 2181 /* Avoid warning for old style function declarators */ 2182 #pragma warning(disable : 4131) 2183 /* Avoid warning for conversion to type with smaller range */ 2184 #pragma warning(disable : 4244) 2185 /* Avoid warning for conversion to larger size */ 2186 #pragma warning(disable : 4306) 2187 /* Avoid warning for unreferenced formal parameter */ 2188 #pragma warning(disable : 4100) 2189 /* Avoid warning for differs in indirection to slightly different base type */ 2190 #pragma warning(disable : 4057) 2191 /* Avoid warning for constant conditional expression */ 2192 #pragma warning(disable : 4127) 2193 /* Avoid warning for assignment within conditional */ 2194 #pragma warning(disable : 4706) 2195 #endif 2196 2197 /* Note: a NULL argument for vim_realloc() is not portable, don't use it. */ 2198 #if defined(MEM_PROFILE) 2199 # define vim_realloc(ptr, size) mem_realloc((ptr), (size)) 2200 #else 2201 # define vim_realloc(ptr, size) realloc((ptr), (size)) 2202 #endif 2203 2204 /* 2205 * The following macros stop display/event loop nesting at the wrong time. 2206 */ 2207 #ifdef ALT_X_INPUT 2208 # define ALT_INPUT_LOCK_OFF suppress_alternate_input = FALSE 2209 # define ALT_INPUT_LOCK_ON suppress_alternate_input = TRUE 2210 #endif 2211 2212 #ifdef FEAT_MBYTE 2213 /* 2214 * Return byte length of character that starts with byte "b". 2215 * Returns 1 for a single-byte character. 2216 * MB_BYTE2LEN_CHECK() can be used to count a special key as one byte. 2217 * Don't call MB_BYTE2LEN(b) with b < 0 or b > 255! 2218 */ 2219 # define MB_BYTE2LEN(b) mb_bytelen_tab[b] 2220 # define MB_BYTE2LEN_CHECK(b) (((b) < 0 || (b) > 255) ? 1 : mb_bytelen_tab[b]) 2221 #endif 2222 2223 #if defined(FEAT_MBYTE) || defined(FEAT_POSTSCRIPT) 2224 /* properties used in enc_canon_table[] (first three mutually exclusive) */ 2225 # define ENC_8BIT 0x01 2226 # define ENC_DBCS 0x02 2227 # define ENC_UNICODE 0x04 2228 2229 # define ENC_ENDIAN_B 0x10 /* Unicode: Big endian */ 2230 # define ENC_ENDIAN_L 0x20 /* Unicode: Little endian */ 2231 2232 # define ENC_2BYTE 0x40 /* Unicode: UCS-2 */ 2233 # define ENC_4BYTE 0x80 /* Unicode: UCS-4 */ 2234 # define ENC_2WORD 0x100 /* Unicode: UTF-16 */ 2235 2236 # define ENC_LATIN1 0x200 /* Latin1 */ 2237 # define ENC_LATIN9 0x400 /* Latin9 */ 2238 # define ENC_MACROMAN 0x800 /* Mac Roman (not Macro Man! :-) */ 2239 #endif 2240 2241 #ifdef FEAT_MBYTE 2242 # ifdef USE_ICONV 2243 # ifndef EILSEQ 2244 # define EILSEQ 123 2245 # endif 2246 # ifdef DYNAMIC_ICONV 2247 /* On Win32 iconv.dll is dynamically loaded. */ 2248 # define ICONV_ERRNO (*iconv_errno()) 2249 # define ICONV_E2BIG 7 2250 # define ICONV_EINVAL 22 2251 # define ICONV_EILSEQ 42 2252 # else 2253 # define ICONV_ERRNO errno 2254 # define ICONV_E2BIG E2BIG 2255 # define ICONV_EINVAL EINVAL 2256 # define ICONV_EILSEQ EILSEQ 2257 # endif 2258 # endif 2259 2260 #endif 2261 2262 /* ISSYMLINK(mode) tests if a file is a symbolic link. */ 2263 #if (defined(S_IFMT) && defined(S_IFLNK)) || defined(S_ISLNK) 2264 # define HAVE_ISSYMLINK 2265 # if defined(S_IFMT) && defined(S_IFLNK) 2266 # define ISSYMLINK(mode) (((mode) & S_IFMT) == S_IFLNK) 2267 # else 2268 # define ISSYMLINK(mode) S_ISLNK(mode) 2269 # endif 2270 #endif 2271 2272 #define SIGN_BYTE 1 /* byte value used where sign is displayed; 2273 attribute value is sign type */ 2274 2275 #ifdef FEAT_NETBEANS_INTG 2276 # define MULTISIGN_BYTE 2 /* byte value used where sign is displayed if 2277 multiple signs exist on the line */ 2278 #endif 2279 2280 #if defined(FEAT_GUI) && defined(FEAT_XCLIPBOARD) 2281 # ifdef FEAT_GUI_GTK 2282 /* Avoid using a global variable for the X display. It's ugly 2283 * and is likely to cause trouble in multihead environments. */ 2284 # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : xterm_dpy) 2285 # else 2286 # define X_DISPLAY (gui.in_use ? gui.dpy : xterm_dpy) 2287 # endif 2288 #else 2289 # ifdef FEAT_GUI 2290 # ifdef FEAT_GUI_GTK 2291 # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : (Display *)NULL) 2292 # else 2293 # define X_DISPLAY gui.dpy 2294 # endif 2295 # else 2296 # define X_DISPLAY xterm_dpy 2297 # endif 2298 #endif 2299 2300 #if defined(FEAT_BROWSE) && defined(GTK_CHECK_VERSION) 2301 # if GTK_CHECK_VERSION(2,4,0) 2302 # define USE_FILE_CHOOSER 2303 # endif 2304 #endif 2305 2306 #ifndef FEAT_NETBEANS_INTG 2307 # undef NBDEBUG 2308 #endif 2309 #ifdef NBDEBUG /* Netbeans debugging. */ 2310 # include "nbdebug.h" 2311 #else 2312 # define nbdebug(a) 2313 #endif 2314 2315 #ifdef IN_PERL_FILE 2316 /* 2317 * Avoid clashes between Perl and Vim namespace. 2318 */ 2319 # undef NORMAL 2320 # undef STRLEN 2321 # undef FF 2322 # undef OP_DELETE 2323 # undef OP_JOIN 2324 # ifdef __BORLANDC__ 2325 # define NOPROTO 1 2326 # endif 2327 /* remove MAX and MIN, included by glib.h, redefined by sys/param.h */ 2328 # ifdef MAX 2329 # undef MAX 2330 # endif 2331 # ifdef MIN 2332 # undef MIN 2333 # endif 2334 /* We use _() for gettext(), Perl uses it for function prototypes... */ 2335 # ifdef _ 2336 # undef _ 2337 # endif 2338 # ifdef DEBUG 2339 # undef DEBUG 2340 # endif 2341 # ifdef _DEBUG 2342 # undef _DEBUG 2343 # endif 2344 # ifdef instr 2345 # undef instr 2346 # endif 2347 /* bool may cause trouble on MACOS but is required on a few other systems 2348 * and for Perl */ 2349 # if defined(bool) && defined(MACOS) && !defined(FEAT_PERL) 2350 # undef bool 2351 # endif 2352 2353 # ifdef __BORLANDC__ 2354 /* Borland has the structure stati64 but not _stati64 */ 2355 # define _stati64 stati64 2356 # endif 2357 #endif 2358 2359 /* values for vim_handle_signal() that are not a signal */ 2360 #define SIGNAL_BLOCK -1 2361 #define SIGNAL_UNBLOCK -2 2362 #if !defined(UNIX) && !defined(VMS) 2363 # define vim_handle_signal(x) 0 2364 #endif 2365 2366 /* flags for skip_vimgrep_pat() */ 2367 #define VGR_GLOBAL 1 2368 #define VGR_NOJUMP 2 2369 2370 /* behavior for bad character, "++bad=" argument */ 2371 #define BAD_REPLACE '?' /* replace it with '?' (default) */ 2372 #define BAD_KEEP -1 /* leave it */ 2373 #define BAD_DROP -2 /* erase it */ 2374 2375 /* last argument for do_source() */ 2376 #define DOSO_NONE 0 2377 #define DOSO_VIMRC 1 /* loading vimrc file */ 2378 #define DOSO_GVIMRC 2 /* loading gvimrc file */ 2379 2380 /* flags for read_viminfo() and children */ 2381 #define VIF_WANT_INFO 1 /* load non-mark info */ 2382 #define VIF_WANT_MARKS 2 /* load file marks */ 2383 #define VIF_FORCEIT 4 /* overwrite info already read */ 2384 #define VIF_GET_OLDFILES 8 /* load v:oldfiles */ 2385 2386 /* flags for buf_freeall() */ 2387 #define BFA_DEL 1 /* buffer is going to be deleted */ 2388 #define BFA_WIPE 2 /* buffer is going to be wiped out */ 2389 #define BFA_KEEP_UNDO 4 /* do not free undo information */ 2390 2391 /* direction for nv_mousescroll() and ins_mousescroll() */ 2392 #define MSCR_DOWN 0 /* DOWN must be FALSE */ 2393 #define MSCR_UP 1 2394 #define MSCR_LEFT -1 2395 #define MSCR_RIGHT -2 2396 2397 #define KEYLEN_PART_KEY -1 /* keylen value for incomplete key-code */ 2398 #define KEYLEN_PART_MAP -2 /* keylen value for incomplete mapping */ 2399 #define KEYLEN_REMOVED 9999 /* keylen value for removed sequence */ 2400 2401 /* Return values from win32_fileinfo(). */ 2402 #define FILEINFO_OK 0 2403 #define FILEINFO_ENC_FAIL 1 /* enc_to_utf16() failed */ 2404 #define FILEINFO_READ_FAIL 2 /* CreateFile() failed */ 2405 #define FILEINFO_INFO_FAIL 3 /* GetFileInformationByHandle() failed */ 2406 2407 /* Return value from get_option_value_strict */ 2408 #define SOPT_BOOL 0x01 /* Boolean option */ 2409 #define SOPT_NUM 0x02 /* Number option */ 2410 #define SOPT_STRING 0x04 /* String option */ 2411 #define SOPT_GLOBAL 0x08 /* Option has global value */ 2412 #define SOPT_WIN 0x10 /* Option has window-local value */ 2413 #define SOPT_BUF 0x20 /* Option has buffer-local value */ 2414 #define SOPT_UNSET 0x40 /* Option does not have local value set */ 2415 2416 /* Option types for various functions in option.c */ 2417 #define SREQ_GLOBAL 0 /* Request global option */ 2418 #define SREQ_WIN 1 /* Request window-local option */ 2419 #define SREQ_BUF 2 /* Request buffer-local option */ 2420 2421 /* Flags for get_reg_contents */ 2422 #define GREG_NO_EXPR 1 /* Do not allow expression register */ 2423 #define GREG_EXPR_SRC 2 /* Return expression itself for "=" register */ 2424 #define GREG_LIST 4 /* Return list */ 2425 2426 /* Character used as separated in autoload function/variable names. */ 2427 #define AUTOLOAD_CHAR '#' 2428 2429 #ifdef FEAT_EVAL 2430 # define SET_NO_HLSEARCH(flag) no_hlsearch = (flag); set_vim_var_nr(VV_HLSEARCH, !no_hlsearch && p_hls) 2431 #else 2432 # define SET_NO_HLSEARCH(flag) no_hlsearch = (flag) 2433 #endif 2434 2435 #ifdef FEAT_JOB_CHANNEL 2436 # define MAX_OPEN_CHANNELS 10 2437 #else 2438 # define MAX_OPEN_CHANNELS 0 2439 #endif 2440 2441 /* Options for json_encode() and json_decode. */ 2442 #define JSON_JS 1 /* use JS instead of JSON */ 2443 #define JSON_NO_NONE 2 /* v:none item not allowed */ 2444 #define JSON_NL 4 /* append a NL */ 2445 2446 /* Used for flags of do_in_path() */ 2447 #define DIP_ALL 0x01 /* all matches, not just the first one */ 2448 #define DIP_DIR 0x02 /* find directories instead of files. */ 2449 #define DIP_ERR 0x04 /* give an error message when none found. */ 2450 #define DIP_START 0x08 /* also use "start" directory in 'packpath' */ 2451 #define DIP_OPT 0x10 /* also use "opt" directory in 'packpath' */ 2452 #define DIP_NORTP 0x20 /* do not use 'runtimepath' */ 2453 #define DIP_NOAFTER 0x40 /* skip "after" directories */ 2454 #define DIP_AFTER 0x80 /* only use "after" directories */ 2455 2456 /* Lowest number used for window ID. Cannot have this many windows. */ 2457 #define LOWEST_WIN_ID 1000 2458 2459 /* Used by the garbage collector. */ 2460 #define COPYID_INC 2 2461 #define COPYID_MASK (~0x1) 2462 2463 /* Values for trans_function_name() argument: */ 2464 #define TFN_INT 1 /* internal function name OK */ 2465 #define TFN_QUIET 2 /* no error messages */ 2466 #define TFN_NO_AUTOLOAD 4 /* do not use script autoloading */ 2467 #define TFN_NO_DEREF 8 /* do not dereference a Funcref */ 2468 2469 /* Values for get_lval() flags argument: */ 2470 #define GLV_QUIET TFN_QUIET /* no error messages */ 2471 #define GLV_NO_AUTOLOAD TFN_NO_AUTOLOAD /* do not use script autoloading */ 2472 2473 #define DO_NOT_FREE_CNT 99999 /* refcount for dict or list that should not 2474 be freed. */ 2475 2476 /* errors for when calling a function */ 2477 #define ERROR_UNKNOWN 0 2478 #define ERROR_TOOMANY 1 2479 #define ERROR_TOOFEW 2 2480 #define ERROR_SCRIPT 3 2481 #define ERROR_DICT 4 2482 #define ERROR_NONE 5 2483 #define ERROR_OTHER 6 2484 #define ERROR_DELETED 7 2485 2486 /* flags for find_name_end() */ 2487 #define FNE_INCL_BR 1 /* include [] in name */ 2488 #define FNE_CHECK_START 2 /* check name starts with valid character */ 2489 2490 #if (defined(sun) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)) \ 2491 && defined(S_ISCHR) 2492 # define OPEN_CHR_FILES 2493 #endif 2494 2495 #if defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) 2496 # define ELAPSED_TIMEVAL 2497 # define ELAPSED_INIT(v) gettimeofday(&v, NULL) 2498 # define ELAPSED_FUNC(v) elapsed(&v) 2499 # define ELAPSED_TYPE struct timeval 2500 long elapsed(struct timeval *start_tv); 2501 #else 2502 # if defined(WIN32) 2503 # define ELAPSED_TICKCOUNT 2504 # define ELAPSED_INIT(v) v = GetTickCount() 2505 # define ELAPSED_FUNC(v) elapsed(v) 2506 # define ELAPSED_TYPE DWORD 2507 long elapsed(DWORD start_tick); 2508 # endif 2509 #endif 2510 2511 #endif /* VIM__H */ 2512