1 /* vi:set ts=8 sts=4 sw=4: 2 * 3 * VIM - Vi IMproved by Bram Moolenaar 4 * 5 * Do ":help uganda" in Vim to read copying and usage conditions. 6 * Do ":help credits" in Vim to see a list of people who contributed. 7 */ 8 9 #ifndef VIM__H 10 # define VIM__H 11 12 /* use fastcall for Borland, when compiling for Win32 */ 13 #if defined(__BORLANDC__) && defined(WIN32) && !defined(DEBUG) 14 #if defined(FEAT_PERL) || \ 15 defined(FEAT_PYTHON) || \ 16 defined(FEAT_PYTHON3) || \ 17 defined(FEAT_RUBY) || \ 18 defined(FEAT_TCL) || \ 19 defined(FEAT_MZSCHEME) || \ 20 defined(DYNAMIC_GETTEXT) || \ 21 defined(DYNAMIC_ICONV) || \ 22 defined(DYNAMIC_IME) || \ 23 defined(XPM) 24 #pragma option -pc 25 # else 26 #pragma option -pr 27 # endif 28 #endif 29 30 #if defined(WIN32) || defined(_WIN64) 31 # include "vimio.h" 32 #endif 33 34 /* ============ the header file puzzle (ca. 50-100 pieces) ========= */ 35 36 #ifdef HAVE_CONFIG_H /* GNU autoconf (or something else) was here */ 37 # include "auto/config.h" 38 # define HAVE_PATHDEF 39 40 /* 41 * Check if configure correctly managed to find sizeof(int). If this failed, 42 * it becomes zero. This is likely a problem of not being able to run the 43 * test program. Other items from configure may also be wrong then! 44 */ 45 # if (VIM_SIZEOF_INT == 0) 46 Error: configure did not run properly. Check auto/config.log. 47 # endif 48 49 /* 50 * Cygwin may have fchdir() in a newer release, but in most versions it 51 * doesn't work well and avoiding it keeps the binary backward compatible. 52 */ 53 # if defined(__CYGWIN32__) && defined(HAVE_FCHDIR) 54 # undef HAVE_FCHDIR 55 # endif 56 57 /* We may need to define the uint32_t on non-Unix system, but using the same 58 * identifier causes conflicts. Therefore use UINT32_T. */ 59 # define UINT32_TYPEDEF uint32_t 60 #endif 61 62 #if !defined(UINT32_TYPEDEF) 63 # if defined(uint32_t) /* this doesn't catch typedefs, unfortunately */ 64 # define UINT32_TYPEDEF uint32_t 65 # else 66 /* Fall back to assuming unsigned int is 32 bit. If this is wrong then the 67 * test in blowfish.c will fail. */ 68 # define UINT32_TYPEDEF unsigned int 69 # endif 70 #endif 71 72 /* user ID of root is usually zero, but not for everybody */ 73 #ifdef __TANDEM 74 # ifndef _TANDEM_SOURCE 75 # define _TANDEM_SOURCE 76 # endif 77 # include <floss.h> 78 # define ROOT_UID 65535 79 # define OLDXAW 80 # if (_TANDEM_ARCH_ == 2 && __H_Series_RVU >= 621) 81 # define SA_ONSTACK_COMPATIBILITY 82 # endif 83 #else 84 # define ROOT_UID 0 85 #endif 86 87 /* 88 * MACOS_CLASSIC compiling for MacOS prior to MacOS X 89 * MACOS_X_UNIX compiling for MacOS X (using os_unix.c) 90 * MACOS_X compiling for MacOS X (using os_unix.c) 91 * MACOS compiling for either one 92 */ 93 #if defined(macintosh) && !defined(MACOS_CLASSIC) 94 # define MACOS_CLASSIC 95 #endif 96 #if defined(MACOS_X_UNIX) 97 # define MACOS_X 98 # ifndef HAVE_CONFIG_H 99 # define UNIX 100 # endif 101 #endif 102 #if defined(MACOS_X) || defined(MACOS_CLASSIC) 103 # define MACOS 104 #endif 105 #if defined(MACOS_X) && defined(MACOS_CLASSIC) 106 Error: To compile for both MACOS X and Classic use a Classic Carbon 107 #endif 108 /* Unless made through the Makefile enforce GUI on Mac */ 109 #if defined(MACOS) && !defined(HAVE_CONFIG_H) 110 # define FEAT_GUI_MAC 111 #endif 112 113 #if defined(FEAT_GUI_MOTIF) \ 114 || defined(FEAT_GUI_GTK) \ 115 || defined(FEAT_GUI_ATHENA) \ 116 || defined(FEAT_GUI_MAC) \ 117 || defined(FEAT_GUI_W32) \ 118 || defined(FEAT_GUI_PHOTON) 119 # define FEAT_GUI_ENABLED /* also defined with NO_X11_INCLUDES */ 120 # if !defined(FEAT_GUI) && !defined(NO_X11_INCLUDES) 121 # define FEAT_GUI 122 # endif 123 #endif 124 125 /* Check support for rendering options */ 126 #ifdef FEAT_GUI 127 # if defined(FEAT_DIRECTX) 128 # define FEAT_RENDER_OPTIONS 129 # endif 130 #endif 131 132 /* Visual Studio 2005 has 'deprecated' many of the standard CRT functions */ 133 #if _MSC_VER >= 1400 134 # define _CRT_SECURE_NO_DEPRECATE 135 # define _CRT_NONSTDC_NO_DEPRECATE 136 #endif 137 138 #if defined(FEAT_GUI_W32) 139 # define FEAT_GUI_MSWIN 140 #endif 141 #if defined(WIN32) || defined(_WIN64) 142 # define MSWIN 143 #endif 144 /* Practically everything is common to both Win32 and Win64 */ 145 #if defined(WIN32) || defined(_WIN64) 146 # define WIN3264 147 #endif 148 149 /* 150 * VIM_SIZEOF_INT is used in feature.h, and the system-specific included files 151 * need items from feature.h. Therefore define VIM_SIZEOF_INT here. 152 */ 153 #ifdef WIN3264 154 # define VIM_SIZEOF_INT 4 155 #endif 156 157 #ifdef AMIGA 158 /* Be conservative about sizeof(int). It could be 4 too. */ 159 # ifndef FEAT_GUI_GTK /* avoid problems when generating prototypes */ 160 # ifdef __GNUC__ 161 # define VIM_SIZEOF_INT 4 162 # else 163 # define VIM_SIZEOF_INT 2 164 # endif 165 # endif 166 #endif 167 #ifdef MACOS 168 # if defined(__POWERPC__) || defined(MACOS_X) || defined(__fourbyteints__) \ 169 || defined(__MRC__) || defined(__SC__) || defined(__APPLE_CC__)/* MPW Compilers */ 170 # define VIM_SIZEOF_INT 4 171 # else 172 # define VIM_SIZEOF_INT 2 173 # endif 174 #endif 175 176 177 /* 178 * #defines for optionals and features 179 * Also defines FEAT_TINY, FEAT_SMALL, etc. when FEAT_HUGE is defined. 180 */ 181 #include "feature.h" 182 183 #if defined(MACOS_X_UNIX) 184 # if defined(FEAT_SMALL) && !defined(FEAT_CLIPBOARD) 185 # define FEAT_CLIPBOARD 186 # endif 187 # if defined(FEAT_SMALL) && !defined(FEAT_MOUSE) 188 # define FEAT_MOUSE 189 # endif 190 #endif 191 192 /* +x11 is only enabled when it's both available and wanted. */ 193 #if defined(HAVE_X11) && defined(WANT_X11) 194 # define FEAT_X11 195 #endif 196 197 #ifdef NO_X11_INCLUDES 198 /* In os_mac_conv.c and os_macosx.m NO_X11_INCLUDES is defined to avoid 199 * X11 headers. Disable all X11 related things to avoid conflicts. */ 200 # ifdef FEAT_X11 201 # undef FEAT_X11 202 # endif 203 # ifdef FEAT_GUI_X11 204 # undef FEAT_GUI_X11 205 # endif 206 # ifdef FEAT_XCLIPBOARD 207 # undef FEAT_XCLIPBOARD 208 # endif 209 # ifdef FEAT_GUI_MOTIF 210 # undef FEAT_GUI_MOTIF 211 # endif 212 # ifdef FEAT_GUI_ATHENA 213 # undef FEAT_GUI_ATHENA 214 # endif 215 # ifdef FEAT_GUI_GTK 216 # undef FEAT_GUI_GTK 217 # endif 218 # ifdef FEAT_BEVAL_TIP 219 # undef FEAT_BEVAL_TIP 220 # endif 221 # ifdef FEAT_XIM 222 # undef FEAT_XIM 223 # endif 224 # ifdef FEAT_CLIENTSERVER 225 # undef FEAT_CLIENTSERVER 226 # endif 227 #endif 228 229 /* The Mac conversion stuff doesn't work under X11. */ 230 #if defined(FEAT_MBYTE) && defined(MACOS_X) 231 # define MACOS_CONVERT 232 #endif 233 234 /* Can't use "PACKAGE" here, conflicts with a Perl include file. */ 235 #ifndef VIMPACKAGE 236 # define VIMPACKAGE "vim" 237 #endif 238 239 /* 240 * Find out if function definitions should include argument types 241 */ 242 #ifdef AZTEC_C 243 # include <functions.h> 244 #endif 245 246 #ifdef SASC 247 # include <clib/exec_protos.h> 248 #endif 249 250 #ifdef _DCC 251 # include <clib/exec_protos.h> 252 #endif 253 254 #ifdef __BEOS__ 255 # include "os_beos.h" 256 #endif 257 258 #if (defined(UNIX) || defined(VMS)) \ 259 && (!defined(MACOS_X) || defined(HAVE_CONFIG_H)) 260 # include "os_unix.h" /* bring lots of system header files */ 261 #endif 262 263 /* Mark unused function arguments with UNUSED, so that gcc -Wunused-parameter 264 * can be used to check for mistakes. */ 265 #ifdef HAVE_ATTRIBUTE_UNUSED 266 # define UNUSED __attribute__((unused)) 267 #else 268 # define UNUSED 269 #endif 270 271 /* if we're compiling in C++ (currently only KVim), the system 272 * headers must have the correct prototypes or nothing will build. 273 * conversely, our prototypes might clash due to throw() specifiers and 274 * cause compilation failures even though the headers are correct. For 275 * a concrete example, gcc-3.2 enforces exception specifications, and 276 * glibc-2.2.5 has them in their system headers. 277 */ 278 #if !defined(__cplusplus) && defined(UNIX) \ 279 && !defined(MACOS_X) /* MACOS_X doesn't yet support osdef.h */ 280 # include "auto/osdef.h" /* bring missing declarations in */ 281 #endif 282 283 #ifdef AMIGA 284 # include "os_amiga.h" 285 #endif 286 287 #ifdef WIN3264 288 # include "os_win32.h" 289 #endif 290 291 #ifdef __MINT__ 292 # include "os_mint.h" 293 #endif 294 295 #if defined(MACOS) 296 # if defined(__MRC__) || defined(__SC__) /* MPW Compilers */ 297 # define HAVE_SETENV 298 # endif 299 # include "os_mac.h" 300 #endif 301 302 #ifdef __QNX__ 303 # include "os_qnx.h" 304 #endif 305 306 #ifdef FEAT_SUN_WORKSHOP 307 # include "workshop.h" 308 #endif 309 310 #ifdef X_LOCALE 311 # include <X11/Xlocale.h> 312 #else 313 # ifdef HAVE_LOCALE_H 314 # include <locale.h> 315 # endif 316 #endif 317 318 /* 319 * Maximum length of a path (for non-unix systems) Make it a bit long, to stay 320 * on the safe side. But not too long to put on the stack. 321 */ 322 #ifndef MAXPATHL 323 # ifdef MAXPATHLEN 324 # define MAXPATHL MAXPATHLEN 325 # else 326 # define MAXPATHL 256 327 # endif 328 #endif 329 #ifdef BACKSLASH_IN_FILENAME 330 # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`%#'\"|!<") 331 #else 332 # ifdef VMS 333 /* VMS allows a lot of characters in the file name */ 334 # define PATH_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'\"|!") 335 # define SHELL_ESC_CHARS ((char_u *)" \t\n*?{`\\%#'|!()&") 336 # else 337 # define PATH_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<") 338 # define SHELL_ESC_CHARS ((char_u *)" \t\n*?[{`$\\%#'\"|!<>();&") 339 # endif 340 #endif 341 342 /* length of a buffer to store a number in ASCII (64 bits binary + NUL) */ 343 #define NUMBUFLEN 65 344 345 /* flags for vim_str2nr() */ 346 #define STR2NR_BIN 1 347 #define STR2NR_OCT 2 348 #define STR2NR_HEX 4 349 #define STR2NR_ALL (STR2NR_BIN + STR2NR_OCT + STR2NR_HEX) 350 #define STR2NR_FORCE 8 /* only when ONE of the above is used */ 351 352 /* 353 * Shorthand for unsigned variables. Many systems, but not all, have u_char 354 * already defined, so we use char_u to avoid trouble. 355 */ 356 typedef unsigned char char_u; 357 typedef unsigned short short_u; 358 typedef unsigned int int_u; 359 /* Make sure long_u is big enough to hold a pointer. 360 * On Win64, longs are 32 bits and pointers are 64 bits. 361 * For printf() and scanf(), we need to take care of long_u specifically. */ 362 #ifdef _WIN64 363 typedef unsigned __int64 long_u; 364 typedef __int64 long_i; 365 # define SCANF_HEX_LONG_U "%Ix" 366 # define SCANF_DECIMAL_LONG_U "%Iu" 367 # define PRINTF_HEX_LONG_U "0x%Ix" 368 #else 369 /* Microsoft-specific. The __w64 keyword should be specified on any typedefs 370 * that change size between 32-bit and 64-bit platforms. For any such type, 371 * __w64 should appear only on the 32-bit definition of the typedef. 372 * Define __w64 as an empty token for everything but MSVC 7.x or later. 373 */ 374 # if !defined(_MSC_VER) || (_MSC_VER < 1300) 375 # define __w64 376 # endif 377 typedef unsigned long __w64 long_u; 378 typedef long __w64 long_i; 379 # define SCANF_HEX_LONG_U "%lx" 380 # define SCANF_DECIMAL_LONG_U "%lu" 381 # define PRINTF_HEX_LONG_U "0x%lx" 382 #endif 383 #define PRINTF_DECIMAL_LONG_U SCANF_DECIMAL_LONG_U 384 385 /* 386 * Only systems which use configure will have SIZEOF_OFF_T and VIM_SIZEOF_LONG 387 * defined, which is ok since those are the same systems which can have 388 * varying sizes for off_t. The other systems will continue to use "%ld" to 389 * print off_t since off_t is simply a typedef to long for them. 390 */ 391 #if defined(SIZEOF_OFF_T) && (SIZEOF_OFF_T > VIM_SIZEOF_LONG) 392 # define LONG_LONG_OFF_T 393 #endif 394 395 /* 396 * We use 64-bit file functions here, if available. E.g. ftello() returns 397 * off_t instead of long, which helps if long is 32 bit and off_t is 64 bit. 398 * We assume that when fseeko() is available then ftello() is too. 399 * Note that Windows has different function names. 400 */ 401 #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) 402 typedef __int64 off_T; 403 # ifdef __MINGW32__ 404 # define vim_lseek lseek64 405 # define vim_fseek fseeko64 406 # define vim_ftell ftello64 407 # else 408 # define vim_lseek _lseeki64 409 # define vim_fseek _fseeki64 410 # define vim_ftell _ftelli64 411 # endif 412 #else 413 typedef off_t off_T; 414 # ifdef HAVE_FSEEKO 415 # define vim_lseek lseek 416 # define vim_ftell ftello 417 # define vim_fseek fseeko 418 # else 419 # define vim_lseek lseek 420 # define vim_ftell ftell 421 # define vim_fseek(a, b, c) fseek(a, (long)b, c) 422 # endif 423 #endif 424 425 /* 426 * The characters and attributes cached for the screen. 427 */ 428 typedef char_u schar_T; 429 #ifdef FEAT_SYN_HL 430 typedef unsigned short sattr_T; 431 # define MAX_TYPENR 65535 432 #else 433 typedef unsigned char sattr_T; 434 # define MAX_TYPENR 255 435 #endif 436 437 /* 438 * The u8char_T can hold one decoded UTF-8 character. 439 * We normally use 32 bits now, since some Asian characters don't fit in 16 440 * bits. u8char_T is only used for displaying, it could be 16 bits to save 441 * memory. 442 */ 443 #ifdef FEAT_MBYTE 444 # ifdef UNICODE16 445 typedef unsigned short u8char_T; /* short should be 16 bits */ 446 # else 447 # if VIM_SIZEOF_INT >= 4 448 typedef unsigned int u8char_T; /* int is 32 bits */ 449 # else 450 typedef unsigned long u8char_T; /* long should be 32 bits or more */ 451 # endif 452 # endif 453 #endif 454 455 #ifndef UNIX /* For Unix this is included in os_unix.h */ 456 # include <stdio.h> 457 # include <ctype.h> 458 #endif 459 460 #include "ascii.h" 461 #include "keymap.h" 462 #include "term.h" 463 #include "macros.h" 464 465 #ifdef LATTICE 466 # include <sys/types.h> 467 # include <sys/stat.h> 468 #endif 469 #ifdef _DCC 470 # include <sys/stat.h> 471 #endif 472 #if defined(MSWIN) 473 # include <sys/stat.h> 474 #endif 475 476 #if defined(HAVE_ERRNO_H) \ 477 || defined(WIN32) || defined(_WIN64) 478 # include <errno.h> 479 #endif 480 481 /* 482 * Allow other (non-unix) systems to configure themselves now 483 * These are also in os_unix.h, because osdef.sh needs them there. 484 */ 485 #ifndef UNIX 486 /* Note: Some systems need both string.h and strings.h (Savage). If the 487 * system can't handle this, define NO_STRINGS_WITH_STRING_H. */ 488 # ifdef HAVE_STRING_H 489 # include <string.h> 490 # endif 491 # if defined(HAVE_STRINGS_H) && !defined(NO_STRINGS_WITH_STRING_H) 492 # include <strings.h> 493 # endif 494 # ifdef HAVE_STAT_H 495 # include <stat.h> 496 # endif 497 # ifdef HAVE_STDLIB_H 498 # include <stdlib.h> 499 # endif 500 #endif /* NON-UNIX */ 501 502 #include <assert.h> 503 504 #ifdef HAVE_STDINT_H 505 # include <stdint.h> 506 #endif 507 #ifdef HAVE_INTTYPES_H 508 # include <inttypes.h> 509 #endif 510 #ifdef HAVE_WCTYPE_H 511 # include <wctype.h> 512 #endif 513 #include <stdarg.h> 514 515 /* for offsetof() */ 516 #include <stddef.h> 517 518 #if defined(HAVE_SYS_SELECT_H) && \ 519 (!defined(HAVE_SYS_TIME_H) || defined(SYS_SELECT_WITH_SYS_TIME)) 520 # include <sys/select.h> 521 #endif 522 523 #ifndef HAVE_SELECT 524 # ifdef HAVE_SYS_POLL_H 525 # include <sys/poll.h> 526 # elif defined(WIN32) 527 # define HAVE_SELECT 528 # else 529 # ifdef HAVE_POLL_H 530 # include <poll.h> 531 # endif 532 # endif 533 #endif 534 535 /* ================ end of the header file puzzle =============== */ 536 537 /* 538 * For dynamically loaded imm library. Currently, only for Win32. 539 */ 540 #ifdef DYNAMIC_IME 541 # ifndef FEAT_MBYTE_IME 542 # define FEAT_MBYTE_IME 543 # endif 544 #endif 545 546 /* 547 * Check input method control. 548 */ 549 #if defined(FEAT_XIM) \ 550 || (defined(FEAT_GUI) && (defined(FEAT_MBYTE_IME) || defined(GLOBAL_IME))) \ 551 || (defined(FEAT_GUI_MAC) && defined(FEAT_MBYTE)) 552 # define USE_IM_CONTROL 553 #endif 554 555 /* 556 * For dynamically loaded gettext library. Currently, only for Win32. 557 */ 558 #ifdef DYNAMIC_GETTEXT 559 # ifndef FEAT_GETTEXT 560 # define FEAT_GETTEXT 561 # endif 562 /* These are in os_win32.c */ 563 extern char *(*dyn_libintl_gettext)(const char *msgid); 564 extern char *(*dyn_libintl_bindtextdomain)(const char *domainname, const char *dirname); 565 extern char *(*dyn_libintl_bind_textdomain_codeset)(const char *domainname, const char *codeset); 566 extern char *(*dyn_libintl_textdomain)(const char *domainname); 567 #endif 568 569 570 /* 571 * The _() stuff is for using gettext(). It is a no-op when libintl.h is not 572 * found or the +multilang feature is disabled. 573 */ 574 #ifdef FEAT_GETTEXT 575 # ifdef DYNAMIC_GETTEXT 576 # define _(x) (*dyn_libintl_gettext)((char *)(x)) 577 # define N_(x) x 578 # define bindtextdomain(domain, dir) (*dyn_libintl_bindtextdomain)((domain), (dir)) 579 # define bind_textdomain_codeset(domain, codeset) (*dyn_libintl_bind_textdomain_codeset)((domain), (codeset)) 580 # if !defined(HAVE_BIND_TEXTDOMAIN_CODESET) 581 # define HAVE_BIND_TEXTDOMAIN_CODESET 1 582 # endif 583 # define textdomain(domain) (*dyn_libintl_textdomain)(domain) 584 # else 585 # include <libintl.h> 586 # define _(x) gettext((char *)(x)) 587 # ifdef gettext_noop 588 # define N_(x) gettext_noop(x) 589 # else 590 # define N_(x) x 591 # endif 592 # endif 593 #else 594 # define _(x) ((char *)(x)) 595 # define N_(x) x 596 # ifdef bindtextdomain 597 # undef bindtextdomain 598 # endif 599 # define bindtextdomain(x, y) /* empty */ 600 # ifdef bind_textdomain_codeset 601 # undef bind_textdomain_codeset 602 # endif 603 # define bind_textdomain_codeset(x, y) /* empty */ 604 # ifdef textdomain 605 # undef textdomain 606 # endif 607 # define textdomain(x) /* empty */ 608 #endif 609 610 /* 611 * flags for update_screen() 612 * The higher the value, the higher the priority 613 */ 614 #define VALID 10 /* buffer not changed, or changes marked 615 with b_mod_* */ 616 #define INVERTED 20 /* redisplay inverted part that changed */ 617 #define INVERTED_ALL 25 /* redisplay whole inverted part */ 618 #define REDRAW_TOP 30 /* display first w_upd_rows screen lines */ 619 #define SOME_VALID 35 /* like NOT_VALID but may scroll */ 620 #define NOT_VALID 40 /* buffer needs complete redraw */ 621 #define CLEAR 50 /* screen messed up, clear it */ 622 623 /* 624 * Flags for w_valid. 625 * These are set when something in a window structure becomes invalid, except 626 * when the cursor is moved. Call check_cursor_moved() before testing one of 627 * the flags. 628 * These are reset when that thing has been updated and is valid again. 629 * 630 * Every function that invalidates one of these must call one of the 631 * invalidate_* functions. 632 * 633 * w_valid is supposed to be used only in screen.c. From other files, use the 634 * functions that set or reset the flags. 635 * 636 * VALID_BOTLINE VALID_BOTLINE_AP 637 * on on w_botline valid 638 * off on w_botline approximated 639 * off off w_botline not valid 640 * on off not possible 641 */ 642 #define VALID_WROW 0x01 /* w_wrow (window row) is valid */ 643 #define VALID_WCOL 0x02 /* w_wcol (window col) is valid */ 644 #define VALID_VIRTCOL 0x04 /* w_virtcol (file col) is valid */ 645 #define VALID_CHEIGHT 0x08 /* w_cline_height and w_cline_folded valid */ 646 #define VALID_CROW 0x10 /* w_cline_row is valid */ 647 #define VALID_BOTLINE 0x20 /* w_botine and w_empty_rows are valid */ 648 #define VALID_BOTLINE_AP 0x40 /* w_botine is approximated */ 649 #define VALID_TOPLINE 0x80 /* w_topline is valid (for cursor position) */ 650 651 /* 652 * Terminal highlighting attribute bits. 653 * Attributes above HL_ALL are used for syntax highlighting. 654 */ 655 #define HL_NORMAL 0x00 656 #define HL_INVERSE 0x01 657 #define HL_BOLD 0x02 658 #define HL_ITALIC 0x04 659 #define HL_UNDERLINE 0x08 660 #define HL_UNDERCURL 0x10 661 #define HL_STANDOUT 0x20 662 #define HL_ALL 0x3f 663 664 /* special attribute addition: Put message in history */ 665 #define MSG_HIST 0x1000 666 667 /* 668 * values for State 669 * 670 * The lower bits up to 0x20 are used to distinguish normal/visual/op_pending 671 * and cmdline/insert+replace mode. This is used for mapping. If none of 672 * these bits are set, no mapping is done. 673 * The upper bits are used to distinguish between other states. 674 */ 675 #define NORMAL 0x01 /* Normal mode, command expected */ 676 #define VISUAL 0x02 /* Visual mode - use get_real_state() */ 677 #define OP_PENDING 0x04 /* Normal mode, operator is pending - use 678 get_real_state() */ 679 #define CMDLINE 0x08 /* Editing command line */ 680 #define INSERT 0x10 /* Insert mode */ 681 #define LANGMAP 0x20 /* Language mapping, can be combined with 682 INSERT and CMDLINE */ 683 684 #define REPLACE_FLAG 0x40 /* Replace mode flag */ 685 #define REPLACE (REPLACE_FLAG + INSERT) 686 #ifdef FEAT_VREPLACE 687 # define VREPLACE_FLAG 0x80 /* Virtual-replace mode flag */ 688 # define VREPLACE (REPLACE_FLAG + VREPLACE_FLAG + INSERT) 689 #endif 690 #define LREPLACE (REPLACE_FLAG + LANGMAP) 691 692 #define NORMAL_BUSY (0x100 + NORMAL) /* Normal mode, busy with a command */ 693 #define HITRETURN (0x200 + NORMAL) /* waiting for return or command */ 694 #define ASKMORE 0x300 /* Asking if you want --more-- */ 695 #define SETWSIZE 0x400 /* window size has changed */ 696 #define ABBREV 0x500 /* abbreviation instead of mapping */ 697 #define EXTERNCMD 0x600 /* executing an external command */ 698 #define SHOWMATCH (0x700 + INSERT) /* show matching paren */ 699 #define CONFIRM 0x800 /* ":confirm" prompt */ 700 #define SELECTMODE 0x1000 /* Select mode, only for mappings */ 701 702 #define MAP_ALL_MODES (0x3f | SELECTMODE) /* all mode bits used for 703 * mapping */ 704 705 /* directions */ 706 #define FORWARD 1 707 #define BACKWARD (-1) 708 #define FORWARD_FILE 3 709 #define BACKWARD_FILE (-3) 710 711 /* return values for functions */ 712 #if !(defined(OK) && (OK == 1)) 713 /* OK already defined to 1 in MacOS X curses, skip this */ 714 # define OK 1 715 #endif 716 #define FAIL 0 717 #define NOTDONE 2 /* not OK or FAIL but skipped */ 718 719 /* flags for b_flags */ 720 #define BF_RECOVERED 0x01 /* buffer has been recovered */ 721 #define BF_CHECK_RO 0x02 /* need to check readonly when loading file 722 into buffer (set by ":e", may be reset by 723 ":buf" */ 724 #define BF_NEVERLOADED 0x04 /* file has never been loaded into buffer, 725 many variables still need to be set */ 726 #define BF_NOTEDITED 0x08 /* Set when file name is changed after 727 starting to edit, reset when file is 728 written out. */ 729 #define BF_NEW 0x10 /* file didn't exist when editing started */ 730 #define BF_NEW_W 0x20 /* Warned for BF_NEW and file created */ 731 #define BF_READERR 0x40 /* got errors while reading the file */ 732 #define BF_DUMMY 0x80 /* dummy buffer, only used internally */ 733 #define BF_PRESERVED 0x100 /* ":preserve" was used */ 734 735 /* Mask to check for flags that prevent normal writing */ 736 #define BF_WRITE_MASK (BF_NOTEDITED + BF_NEW + BF_READERR) 737 738 /* 739 * values for xp_context when doing command line completion 740 */ 741 #define EXPAND_UNSUCCESSFUL (-2) 742 #define EXPAND_OK (-1) 743 #define EXPAND_NOTHING 0 744 #define EXPAND_COMMANDS 1 745 #define EXPAND_FILES 2 746 #define EXPAND_DIRECTORIES 3 747 #define EXPAND_SETTINGS 4 748 #define EXPAND_BOOL_SETTINGS 5 749 #define EXPAND_TAGS 6 750 #define EXPAND_OLD_SETTING 7 751 #define EXPAND_HELP 8 752 #define EXPAND_BUFFERS 9 753 #define EXPAND_EVENTS 10 754 #define EXPAND_MENUS 11 755 #define EXPAND_SYNTAX 12 756 #define EXPAND_HIGHLIGHT 13 757 #define EXPAND_AUGROUP 14 758 #define EXPAND_USER_VARS 15 759 #define EXPAND_MAPPINGS 16 760 #define EXPAND_TAGS_LISTFILES 17 761 #define EXPAND_FUNCTIONS 18 762 #define EXPAND_USER_FUNC 19 763 #define EXPAND_EXPRESSION 20 764 #define EXPAND_MENUNAMES 21 765 #define EXPAND_USER_COMMANDS 22 766 #define EXPAND_USER_CMD_FLAGS 23 767 #define EXPAND_USER_NARGS 24 768 #define EXPAND_USER_COMPLETE 25 769 #define EXPAND_ENV_VARS 26 770 #define EXPAND_LANGUAGE 27 771 #define EXPAND_COLORS 28 772 #define EXPAND_COMPILER 29 773 #define EXPAND_USER_DEFINED 30 774 #define EXPAND_USER_LIST 31 775 #define EXPAND_SHELLCMD 32 776 #define EXPAND_CSCOPE 33 777 #define EXPAND_SIGN 34 778 #define EXPAND_PROFILE 35 779 #define EXPAND_BEHAVE 36 780 #define EXPAND_FILETYPE 37 781 #define EXPAND_FILES_IN_PATH 38 782 #define EXPAND_OWNSYNTAX 39 783 #define EXPAND_LOCALES 40 784 #define EXPAND_HISTORY 41 785 #define EXPAND_USER 42 786 #define EXPAND_SYNTIME 43 787 #define EXPAND_USER_ADDR_TYPE 44 788 #define EXPAND_PACKADD 45 789 790 /* Values for exmode_active (0 is no exmode) */ 791 #define EXMODE_NORMAL 1 792 #define EXMODE_VIM 2 793 794 /* Values for nextwild() and ExpandOne(). See ExpandOne() for meaning. */ 795 #define WILD_FREE 1 796 #define WILD_EXPAND_FREE 2 797 #define WILD_EXPAND_KEEP 3 798 #define WILD_NEXT 4 799 #define WILD_PREV 5 800 #define WILD_ALL 6 801 #define WILD_LONGEST 7 802 #define WILD_ALL_KEEP 8 803 804 #define WILD_LIST_NOTFOUND 0x01 805 #define WILD_HOME_REPLACE 0x02 806 #define WILD_USE_NL 0x04 807 #define WILD_NO_BEEP 0x08 808 #define WILD_ADD_SLASH 0x10 809 #define WILD_KEEP_ALL 0x20 810 #define WILD_SILENT 0x40 811 #define WILD_ESCAPE 0x80 812 #define WILD_ICASE 0x100 813 #define WILD_ALLLINKS 0x200 814 815 /* Flags for expand_wildcards() */ 816 #define EW_DIR 0x01 /* include directory names */ 817 #define EW_FILE 0x02 /* include file names */ 818 #define EW_NOTFOUND 0x04 /* include not found names */ 819 #define EW_ADDSLASH 0x08 /* append slash to directory name */ 820 #define EW_KEEPALL 0x10 /* keep all matches */ 821 #define EW_SILENT 0x20 /* don't print "1 returned" from shell */ 822 #define EW_EXEC 0x40 /* executable files */ 823 #define EW_PATH 0x80 /* search in 'path' too */ 824 #define EW_ICASE 0x100 /* ignore case */ 825 #define EW_NOERROR 0x200 /* no error for bad regexp */ 826 #define EW_NOTWILD 0x400 /* add match with literal name if exists */ 827 #define EW_KEEPDOLLAR 0x800 /* do not escape $, $var is expanded */ 828 /* Note: mostly EW_NOTFOUND and EW_SILENT are mutually exclusive: EW_NOTFOUND 829 * is used when executing commands and EW_SILENT for interactive expanding. */ 830 #define EW_ALLLINKS 0x1000 /* also links not pointing to existing file */ 831 #define EW_SHELLCMD 0x2000 /* called from expand_shellcmd(), don't check 832 * if executable is in $PATH */ 833 #define EW_DODOT 0x4000 /* also files starting with a dot */ 834 #define EW_EMPTYOK 0x8000 /* no matches is not an error */ 835 836 /* Flags for find_file_*() functions. */ 837 #define FINDFILE_FILE 0 /* only files */ 838 #define FINDFILE_DIR 1 /* only directories */ 839 #define FINDFILE_BOTH 2 /* files and directories */ 840 841 #ifdef FEAT_WINDOWS 842 # define W_WINCOL(wp) (wp->w_wincol) 843 # define W_WIDTH(wp) (wp->w_width) 844 # define W_ENDCOL(wp) (wp->w_wincol + wp->w_width) 845 # define W_VSEP_WIDTH(wp) (wp->w_vsep_width) 846 #else 847 # define W_WINCOL(wp) 0 848 # define W_WIDTH(wp) Columns 849 # define W_ENDCOL(wp) Columns 850 # define W_VSEP_WIDTH(wp) 0 851 #endif 852 #ifdef FEAT_WINDOWS 853 # define W_STATUS_HEIGHT(wp) (wp->w_status_height) 854 # define W_WINROW(wp) (wp->w_winrow) 855 #else 856 # define W_STATUS_HEIGHT(wp) 0 857 # define W_WINROW(wp) 0 858 #endif 859 860 #ifdef NO_EXPANDPATH 861 # define gen_expand_wildcards mch_expand_wildcards 862 #endif 863 864 /* Values for the find_pattern_in_path() function args 'type' and 'action': */ 865 #define FIND_ANY 1 866 #define FIND_DEFINE 2 867 #define CHECK_PATH 3 868 869 #define ACTION_SHOW 1 870 #define ACTION_GOTO 2 871 #define ACTION_SPLIT 3 872 #define ACTION_SHOW_ALL 4 873 #ifdef FEAT_INS_EXPAND 874 # define ACTION_EXPAND 5 875 #endif 876 877 #ifdef FEAT_SYN_HL 878 # define SST_MIN_ENTRIES 150 /* minimal size for state stack array */ 879 # define SST_MAX_ENTRIES 1000 /* maximal size for state stack array */ 880 # define SST_FIX_STATES 7 /* size of sst_stack[]. */ 881 # define SST_DIST 16 /* normal distance between entries */ 882 # define SST_INVALID (synstate_T *)-1 /* invalid syn_state pointer */ 883 884 # define HL_CONTAINED 0x01 /* not used on toplevel */ 885 # define HL_TRANSP 0x02 /* has no highlighting */ 886 # define HL_ONELINE 0x04 /* match within one line only */ 887 # define HL_HAS_EOL 0x08 /* end pattern that matches with $ */ 888 # define HL_SYNC_HERE 0x10 /* sync point after this item (syncing only) */ 889 # define HL_SYNC_THERE 0x20 /* sync point at current line (syncing only) */ 890 # define HL_MATCH 0x40 /* use match ID instead of item ID */ 891 # define HL_SKIPNL 0x80 /* nextgroup can skip newlines */ 892 # define HL_SKIPWHITE 0x100 /* nextgroup can skip white space */ 893 # define HL_SKIPEMPTY 0x200 /* nextgroup can skip empty lines */ 894 # define HL_KEEPEND 0x400 /* end match always kept */ 895 # define HL_EXCLUDENL 0x800 /* exclude NL from match */ 896 # define HL_DISPLAY 0x1000 /* only used for displaying, not syncing */ 897 # define HL_FOLD 0x2000 /* define fold */ 898 # define HL_EXTEND 0x4000 /* ignore a keepend */ 899 # define HL_MATCHCONT 0x8000 /* match continued from previous line */ 900 # define HL_TRANS_CONT 0x10000 /* transparent item without contains arg */ 901 # define HL_CONCEAL 0x20000 /* can be concealed */ 902 # define HL_CONCEALENDS 0x40000 /* can be concealed */ 903 #endif 904 905 /* Values for 'options' argument in do_search() and searchit() */ 906 #define SEARCH_REV 0x01 /* go in reverse of previous dir. */ 907 #define SEARCH_ECHO 0x02 /* echo the search command and handle options */ 908 #define SEARCH_MSG 0x0c /* give messages (yes, it's not 0x04) */ 909 #define SEARCH_NFMSG 0x08 /* give all messages except not found */ 910 #define SEARCH_OPT 0x10 /* interpret optional flags */ 911 #define SEARCH_HIS 0x20 /* put search pattern in history */ 912 #define SEARCH_END 0x40 /* put cursor at end of match */ 913 #define SEARCH_NOOF 0x80 /* don't add offset to position */ 914 #define SEARCH_START 0x100 /* start search without col offset */ 915 #define SEARCH_MARK 0x200 /* set previous context mark */ 916 #define SEARCH_KEEP 0x400 /* keep previous search pattern */ 917 #define SEARCH_PEEK 0x800 /* peek for typed char, cancel search */ 918 #define SEARCH_COL 0x1000 /* start at specified column instead of zero */ 919 920 /* Values for find_ident_under_cursor() */ 921 #define FIND_IDENT 1 /* find identifier (word) */ 922 #define FIND_STRING 2 /* find any string (WORD) */ 923 #define FIND_EVAL 4 /* include "->", "[]" and "." */ 924 925 /* Values for file_name_in_line() */ 926 #define FNAME_MESS 1 /* give error message */ 927 #define FNAME_EXP 2 /* expand to path */ 928 #define FNAME_HYP 4 /* check for hypertext link */ 929 #define FNAME_INCL 8 /* apply 'includeexpr' */ 930 #define FNAME_REL 16 /* ".." and "./" are relative to the (current) 931 file instead of the current directory */ 932 #define FNAME_UNESC 32 /* remove backslashes used for escaping */ 933 934 /* Values for buflist_getfile() */ 935 #define GETF_SETMARK 0x01 /* set pcmark before jumping */ 936 #define GETF_ALT 0x02 /* jumping to alternate file (not buf num) */ 937 #define GETF_SWITCH 0x04 /* respect 'switchbuf' settings when jumping */ 938 939 /* Values for buflist_new() flags */ 940 #define BLN_CURBUF 1 /* may re-use curbuf for new buffer */ 941 #define BLN_LISTED 2 /* put new buffer in buffer list */ 942 #define BLN_DUMMY 4 /* allocating dummy buffer */ 943 #define BLN_NEW 8 /* create a new buffer */ 944 #define BLN_NOOPT 16 /* don't copy options to existing buffer */ 945 #define BLN_DUMMY_OK 32 /* also find an existing dummy buffer */ 946 947 /* Values for in_cinkeys() */ 948 #define KEY_OPEN_FORW 0x101 949 #define KEY_OPEN_BACK 0x102 950 #define KEY_COMPLETE 0x103 /* end of completion */ 951 952 /* Values for "noremap" argument of ins_typebuf(). Also used for 953 * map->m_noremap and menu->noremap[]. */ 954 #define REMAP_YES 0 /* allow remapping */ 955 #define REMAP_NONE -1 /* no remapping */ 956 #define REMAP_SCRIPT -2 /* remap script-local mappings only */ 957 #define REMAP_SKIP -3 /* no remapping for first char */ 958 959 /* Values for mch_call_shell() second argument */ 960 #define SHELL_FILTER 1 /* filtering text */ 961 #define SHELL_EXPAND 2 /* expanding wildcards */ 962 #define SHELL_COOKED 4 /* set term to cooked mode */ 963 #define SHELL_DOOUT 8 /* redirecting output */ 964 #define SHELL_SILENT 16 /* don't print error returned by command */ 965 #define SHELL_READ 32 /* read lines and insert into buffer */ 966 #define SHELL_WRITE 64 /* write lines from buffer */ 967 968 /* Values returned by mch_nodetype() */ 969 #define NODE_NORMAL 0 /* file or directory, check with mch_isdir()*/ 970 #define NODE_WRITABLE 1 /* something we can write to (character 971 device, fifo, socket, ..) */ 972 #define NODE_OTHER 2 /* non-writable thing (e.g., block device) */ 973 974 /* Values for readfile() flags */ 975 #define READ_NEW 0x01 /* read a file into a new buffer */ 976 #define READ_FILTER 0x02 /* read filter output */ 977 #define READ_STDIN 0x04 /* read from stdin */ 978 #define READ_BUFFER 0x08 /* read from curbuf (converting stdin) */ 979 #define READ_DUMMY 0x10 /* reading into a dummy buffer */ 980 #define READ_KEEP_UNDO 0x20 /* keep undo info*/ 981 982 /* Values for change_indent() */ 983 #define INDENT_SET 1 /* set indent */ 984 #define INDENT_INC 2 /* increase indent */ 985 #define INDENT_DEC 3 /* decrease indent */ 986 987 /* Values for flags argument for findmatchlimit() */ 988 #define FM_BACKWARD 0x01 /* search backwards */ 989 #define FM_FORWARD 0x02 /* search forwards */ 990 #define FM_BLOCKSTOP 0x04 /* stop at start/end of block */ 991 #define FM_SKIPCOMM 0x08 /* skip comments */ 992 993 /* Values for action argument for do_buffer() */ 994 #define DOBUF_GOTO 0 /* go to specified buffer */ 995 #define DOBUF_SPLIT 1 /* split window and go to specified buffer */ 996 #define DOBUF_UNLOAD 2 /* unload specified buffer(s) */ 997 #define DOBUF_DEL 3 /* delete specified buffer(s) from buflist */ 998 #define DOBUF_WIPE 4 /* delete specified buffer(s) really */ 999 1000 /* Values for start argument for do_buffer() */ 1001 #define DOBUF_CURRENT 0 /* "count" buffer from current buffer */ 1002 #define DOBUF_FIRST 1 /* "count" buffer from first buffer */ 1003 #define DOBUF_LAST 2 /* "count" buffer from last buffer */ 1004 #define DOBUF_MOD 3 /* "count" mod. buffer from current buffer */ 1005 1006 /* Values for sub_cmd and which_pat argument for search_regcomp() */ 1007 /* Also used for which_pat argument for searchit() */ 1008 #define RE_SEARCH 0 /* save/use pat in/from search_pattern */ 1009 #define RE_SUBST 1 /* save/use pat in/from subst_pattern */ 1010 #define RE_BOTH 2 /* save pat in both patterns */ 1011 #define RE_LAST 2 /* use last used pattern if "pat" is NULL */ 1012 1013 /* Second argument for vim_regcomp(). */ 1014 #define RE_MAGIC 1 /* 'magic' option */ 1015 #define RE_STRING 2 /* match in string instead of buffer text */ 1016 #define RE_STRICT 4 /* don't allow [abc] without ] */ 1017 #define RE_AUTO 8 /* automatic engine selection */ 1018 1019 #ifdef FEAT_SYN_HL 1020 /* values for reg_do_extmatch */ 1021 # define REX_SET 1 /* to allow \z\(...\), */ 1022 # define REX_USE 2 /* to allow \z\1 et al. */ 1023 #endif 1024 1025 /* Return values for fullpathcmp() */ 1026 /* Note: can use (fullpathcmp() & FPC_SAME) to check for equal files */ 1027 #define FPC_SAME 1 /* both exist and are the same file. */ 1028 #define FPC_DIFF 2 /* both exist and are different files. */ 1029 #define FPC_NOTX 4 /* both don't exist. */ 1030 #define FPC_DIFFX 6 /* one of them doesn't exist. */ 1031 #define FPC_SAMEX 7 /* both don't exist and file names are same. */ 1032 1033 /* flags for do_ecmd() */ 1034 #define ECMD_HIDE 0x01 /* don't free the current buffer */ 1035 #define ECMD_SET_HELP 0x02 /* set b_help flag of (new) buffer before 1036 opening file */ 1037 #define ECMD_OLDBUF 0x04 /* use existing buffer if it exists */ 1038 #define ECMD_FORCEIT 0x08 /* ! used in Ex command */ 1039 #define ECMD_ADDBUF 0x10 /* don't edit, just add to buffer list */ 1040 1041 /* for lnum argument in do_ecmd() */ 1042 #define ECMD_LASTL (linenr_T)0 /* use last position in loaded file */ 1043 #define ECMD_LAST (linenr_T)-1 /* use last position in all files */ 1044 #define ECMD_ONE (linenr_T)1 /* use first line */ 1045 1046 /* flags for do_cmdline() */ 1047 #define DOCMD_VERBOSE 0x01 /* included command in error message */ 1048 #define DOCMD_NOWAIT 0x02 /* don't call wait_return() and friends */ 1049 #define DOCMD_REPEAT 0x04 /* repeat exec. until getline() returns NULL */ 1050 #define DOCMD_KEYTYPED 0x08 /* don't reset KeyTyped */ 1051 #define DOCMD_EXCRESET 0x10 /* reset exception environment (for debugging)*/ 1052 #define DOCMD_KEEPLINE 0x20 /* keep typed line for repeating with "." */ 1053 1054 /* flags for beginline() */ 1055 #define BL_WHITE 1 /* cursor on first non-white in the line */ 1056 #define BL_SOL 2 /* use 'sol' option */ 1057 #define BL_FIX 4 /* don't leave cursor on a NUL */ 1058 1059 /* flags for mf_sync() */ 1060 #define MFS_ALL 1 /* also sync blocks with negative numbers */ 1061 #define MFS_STOP 2 /* stop syncing when a character is available */ 1062 #define MFS_FLUSH 4 /* flushed file to disk */ 1063 #define MFS_ZERO 8 /* only write block 0 */ 1064 1065 /* flags for buf_copy_options() */ 1066 #define BCO_ENTER 1 /* going to enter the buffer */ 1067 #define BCO_ALWAYS 2 /* always copy the options */ 1068 #define BCO_NOHELP 4 /* don't touch the help related options */ 1069 1070 /* flags for do_put() */ 1071 #define PUT_FIXINDENT 1 /* make indent look nice */ 1072 #define PUT_CURSEND 2 /* leave cursor after end of new text */ 1073 #define PUT_CURSLINE 4 /* leave cursor on last line of new text */ 1074 #define PUT_LINE 8 /* put register as lines */ 1075 #define PUT_LINE_SPLIT 16 /* split line for linewise register */ 1076 #define PUT_LINE_FORWARD 32 /* put linewise register below Visual sel. */ 1077 1078 /* flags for set_indent() */ 1079 #define SIN_CHANGED 1 /* call changed_bytes() when line changed */ 1080 #define SIN_INSERT 2 /* insert indent before existing text */ 1081 #define SIN_UNDO 4 /* save line for undo before changing it */ 1082 1083 /* flags for insertchar() */ 1084 #define INSCHAR_FORMAT 1 /* force formatting */ 1085 #define INSCHAR_DO_COM 2 /* format comments */ 1086 #define INSCHAR_CTRLV 4 /* char typed just after CTRL-V */ 1087 #define INSCHAR_NO_FEX 8 /* don't use 'formatexpr' */ 1088 #define INSCHAR_COM_LIST 16 /* format comments with list/2nd line indent */ 1089 1090 /* flags for open_line() */ 1091 #define OPENLINE_DELSPACES 1 /* delete spaces after cursor */ 1092 #define OPENLINE_DO_COM 2 /* format comments */ 1093 #define OPENLINE_KEEPTRAIL 4 /* keep trailing spaces */ 1094 #define OPENLINE_MARKFIX 8 /* fix mark positions */ 1095 #define OPENLINE_COM_LIST 16 /* format comments with list/2nd line indent */ 1096 1097 /* 1098 * There are five history tables: 1099 */ 1100 #define HIST_CMD 0 /* colon commands */ 1101 #define HIST_SEARCH 1 /* search commands */ 1102 #define HIST_EXPR 2 /* expressions (from entering = register) */ 1103 #define HIST_INPUT 3 /* input() lines */ 1104 #define HIST_DEBUG 4 /* debug commands */ 1105 #define HIST_COUNT 5 /* number of history tables */ 1106 1107 /* The type numbers are fixed for backwards compatibility. */ 1108 #define BARTYPE_VERSION 1 1109 #define BARTYPE_HISTORY 2 1110 #define BARTYPE_REGISTER 3 1111 #define BARTYPE_MARK 4 1112 1113 #define VIMINFO_VERSION 4 1114 #define VIMINFO_VERSION_WITH_HISTORY 2 1115 #define VIMINFO_VERSION_WITH_REGISTERS 3 1116 #define VIMINFO_VERSION_WITH_MARKS 4 1117 1118 typedef enum { 1119 BVAL_NR, 1120 BVAL_STRING, 1121 BVAL_EMPTY 1122 } btype_T; 1123 1124 typedef struct { 1125 btype_T bv_type; 1126 long bv_nr; 1127 char_u *bv_string; 1128 int bv_len; /* length of bv_string */ 1129 int bv_allocated; /* bv_string was allocated */ 1130 } bval_T; 1131 1132 /* 1133 * Values for do_tag(). 1134 */ 1135 #define DT_TAG 1 /* jump to newer position or same tag again */ 1136 #define DT_POP 2 /* jump to older position */ 1137 #define DT_NEXT 3 /* jump to next match of same tag */ 1138 #define DT_PREV 4 /* jump to previous match of same tag */ 1139 #define DT_FIRST 5 /* jump to first match of same tag */ 1140 #define DT_LAST 6 /* jump to first match of same tag */ 1141 #define DT_SELECT 7 /* jump to selection from list */ 1142 #define DT_HELP 8 /* like DT_TAG, but no wildcards */ 1143 #define DT_JUMP 9 /* jump to new tag or selection from list */ 1144 #define DT_CSCOPE 10 /* cscope find command (like tjump) */ 1145 #define DT_LTAG 11 /* tag using location list */ 1146 #define DT_FREE 99 /* free cached matches */ 1147 1148 /* 1149 * flags for find_tags(). 1150 */ 1151 #define TAG_HELP 1 /* only search for help tags */ 1152 #define TAG_NAMES 2 /* only return name of tag */ 1153 #define TAG_REGEXP 4 /* use tag pattern as regexp */ 1154 #define TAG_NOIC 8 /* don't always ignore case */ 1155 #ifdef FEAT_CSCOPE 1156 # define TAG_CSCOPE 16 /* cscope tag */ 1157 #endif 1158 #define TAG_VERBOSE 32 /* message verbosity */ 1159 #define TAG_INS_COMP 64 /* Currently doing insert completion */ 1160 #define TAG_KEEP_LANG 128 /* keep current language */ 1161 1162 #define TAG_MANY 300 /* When finding many tags (for completion), 1163 find up to this many tags */ 1164 1165 /* 1166 * Types of dialogs passed to do_vim_dialog(). 1167 */ 1168 #define VIM_GENERIC 0 1169 #define VIM_ERROR 1 1170 #define VIM_WARNING 2 1171 #define VIM_INFO 3 1172 #define VIM_QUESTION 4 1173 #define VIM_LAST_TYPE 4 /* sentinel value */ 1174 1175 /* 1176 * Return values for functions like gui_yesnocancel() 1177 */ 1178 #define VIM_YES 2 1179 #define VIM_NO 3 1180 #define VIM_CANCEL 4 1181 #define VIM_ALL 5 1182 #define VIM_DISCARDALL 6 1183 1184 /* 1185 * arguments for win_split() 1186 */ 1187 #define WSP_ROOM 1 /* require enough room */ 1188 #define WSP_VERT 2 /* split vertically */ 1189 #define WSP_TOP 4 /* window at top-left of shell */ 1190 #define WSP_BOT 8 /* window at bottom-right of shell */ 1191 #define WSP_HELP 16 /* creating the help window */ 1192 #define WSP_BELOW 32 /* put new window below/right */ 1193 #define WSP_ABOVE 64 /* put new window above/left */ 1194 #define WSP_NEWLOC 128 /* don't copy location list */ 1195 1196 /* 1197 * arguments for gui_set_shellsize() 1198 */ 1199 #define RESIZE_VERT 1 /* resize vertically */ 1200 #define RESIZE_HOR 2 /* resize horizontally */ 1201 #define RESIZE_BOTH 15 /* resize in both directions */ 1202 1203 /* 1204 * flags for check_changed() 1205 */ 1206 #define CCGD_AW 1 /* do autowrite if buffer was changed */ 1207 #define CCGD_MULTWIN 2 /* check also when several wins for the buf */ 1208 #define CCGD_FORCEIT 4 /* ! used */ 1209 #define CCGD_ALLBUF 8 /* may write all buffers */ 1210 #define CCGD_EXCMD 16 /* may suggest using ! */ 1211 1212 /* 1213 * "flags" values for option-setting functions. 1214 * When OPT_GLOBAL and OPT_LOCAL are both missing, set both local and global 1215 * values, get local value. 1216 */ 1217 #define OPT_FREE 1 /* free old value if it was allocated */ 1218 #define OPT_GLOBAL 2 /* use global value */ 1219 #define OPT_LOCAL 4 /* use local value */ 1220 #define OPT_MODELINE 8 /* option in modeline */ 1221 #define OPT_WINONLY 16 /* only set window-local options */ 1222 #define OPT_NOWIN 32 /* don't set window-local options */ 1223 1224 /* Magic chars used in confirm dialog strings */ 1225 #define DLG_BUTTON_SEP '\n' 1226 #define DLG_HOTKEY_CHAR '&' 1227 1228 /* Values for "starting" */ 1229 #define NO_SCREEN 2 /* no screen updating yet */ 1230 #define NO_BUFFERS 1 /* not all buffers loaded yet */ 1231 /* 0 not starting anymore */ 1232 1233 /* Values for swap_exists_action: what to do when swap file already exists */ 1234 #define SEA_NONE 0 /* don't use dialog */ 1235 #define SEA_DIALOG 1 /* use dialog when possible */ 1236 #define SEA_QUIT 2 /* quit editing the file */ 1237 #define SEA_RECOVER 3 /* recover the file */ 1238 1239 /* 1240 * Minimal size for block 0 of a swap file. 1241 * NOTE: This depends on size of struct block0! It's not done with a sizeof(), 1242 * because struct block0 is defined in memline.c (Sorry). 1243 * The maximal block size is arbitrary. 1244 */ 1245 #define MIN_SWAP_PAGE_SIZE 1048 1246 #define MAX_SWAP_PAGE_SIZE 50000 1247 1248 /* Special values for current_SID. */ 1249 #define SID_MODELINE -1 /* when using a modeline */ 1250 #define SID_CMDARG -2 /* for "--cmd" argument */ 1251 #define SID_CARG -3 /* for "-c" argument */ 1252 #define SID_ENV -4 /* for sourcing environment variable */ 1253 #define SID_ERROR -5 /* option was reset because of an error */ 1254 #define SID_NONE -6 /* don't set scriptID */ 1255 1256 /* 1257 * Events for autocommands. 1258 */ 1259 enum auto_event 1260 { 1261 EVENT_BUFADD = 0, /* after adding a buffer to the buffer list */ 1262 EVENT_BUFNEW, /* after creating any buffer */ 1263 EVENT_BUFDELETE, /* deleting a buffer from the buffer list */ 1264 EVENT_BUFWIPEOUT, /* just before really deleting a buffer */ 1265 EVENT_BUFENTER, /* after entering a buffer */ 1266 EVENT_BUFFILEPOST, /* after renaming a buffer */ 1267 EVENT_BUFFILEPRE, /* before renaming a buffer */ 1268 EVENT_BUFLEAVE, /* before leaving a buffer */ 1269 EVENT_BUFNEWFILE, /* when creating a buffer for a new file */ 1270 EVENT_BUFREADPOST, /* after reading a buffer */ 1271 EVENT_BUFREADPRE, /* before reading a buffer */ 1272 EVENT_BUFREADCMD, /* read buffer using command */ 1273 EVENT_BUFUNLOAD, /* just before unloading a buffer */ 1274 EVENT_BUFHIDDEN, /* just after buffer becomes hidden */ 1275 EVENT_BUFWINENTER, /* after showing a buffer in a window */ 1276 EVENT_BUFWINLEAVE, /* just after buffer removed from window */ 1277 EVENT_BUFWRITEPOST, /* after writing a buffer */ 1278 EVENT_BUFWRITEPRE, /* before writing a buffer */ 1279 EVENT_BUFWRITECMD, /* write buffer using command */ 1280 EVENT_CMDWINENTER, /* after entering the cmdline window */ 1281 EVENT_CMDWINLEAVE, /* before leaving the cmdline window */ 1282 EVENT_COLORSCHEME, /* after loading a colorscheme */ 1283 EVENT_COMPLETEDONE, /* after finishing insert complete */ 1284 EVENT_FILEAPPENDPOST, /* after appending to a file */ 1285 EVENT_FILEAPPENDPRE, /* before appending to a file */ 1286 EVENT_FILEAPPENDCMD, /* append to a file using command */ 1287 EVENT_FILECHANGEDSHELL, /* after shell command that changed file */ 1288 EVENT_FILECHANGEDSHELLPOST, /* after (not) reloading changed file */ 1289 EVENT_FILECHANGEDRO, /* before first change to read-only file */ 1290 EVENT_FILEREADPOST, /* after reading a file */ 1291 EVENT_FILEREADPRE, /* before reading a file */ 1292 EVENT_FILEREADCMD, /* read from a file using command */ 1293 EVENT_FILETYPE, /* new file type detected (user defined) */ 1294 EVENT_FILEWRITEPOST, /* after writing a file */ 1295 EVENT_FILEWRITEPRE, /* before writing a file */ 1296 EVENT_FILEWRITECMD, /* write to a file using command */ 1297 EVENT_FILTERREADPOST, /* after reading from a filter */ 1298 EVENT_FILTERREADPRE, /* before reading from a filter */ 1299 EVENT_FILTERWRITEPOST, /* after writing to a filter */ 1300 EVENT_FILTERWRITEPRE, /* before writing to a filter */ 1301 EVENT_FOCUSGAINED, /* got the focus */ 1302 EVENT_FOCUSLOST, /* lost the focus to another app */ 1303 EVENT_GUIENTER, /* after starting the GUI */ 1304 EVENT_GUIFAILED, /* after starting the GUI failed */ 1305 EVENT_INSERTCHANGE, /* when changing Insert/Replace mode */ 1306 EVENT_INSERTENTER, /* when entering Insert mode */ 1307 EVENT_INSERTLEAVE, /* when leaving Insert mode */ 1308 EVENT_MENUPOPUP, /* just before popup menu is displayed */ 1309 EVENT_QUICKFIXCMDPOST, /* after :make, :grep etc. */ 1310 EVENT_QUICKFIXCMDPRE, /* before :make, :grep etc. */ 1311 EVENT_QUITPRE, /* before :quit */ 1312 EVENT_SESSIONLOADPOST, /* after loading a session file */ 1313 EVENT_STDINREADPOST, /* after reading from stdin */ 1314 EVENT_STDINREADPRE, /* before reading from stdin */ 1315 EVENT_SYNTAX, /* syntax selected */ 1316 EVENT_TERMCHANGED, /* after changing 'term' */ 1317 EVENT_TERMRESPONSE, /* after setting "v:termresponse" */ 1318 EVENT_USER, /* user defined autocommand */ 1319 EVENT_VIMENTER, /* after starting Vim */ 1320 EVENT_VIMLEAVE, /* before exiting Vim */ 1321 EVENT_VIMLEAVEPRE, /* before exiting Vim and writing .viminfo */ 1322 EVENT_VIMRESIZED, /* after Vim window was resized */ 1323 EVENT_WINENTER, /* after entering a window */ 1324 EVENT_WINLEAVE, /* before leaving a window */ 1325 EVENT_WINNEW, /* when entering a new window */ 1326 EVENT_ENCODINGCHANGED, /* after changing the 'encoding' option */ 1327 EVENT_INSERTCHARPRE, /* before inserting a char */ 1328 EVENT_CURSORHOLD, /* cursor in same position for a while */ 1329 EVENT_CURSORHOLDI, /* idem, in Insert mode */ 1330 EVENT_FUNCUNDEFINED, /* if calling a function which doesn't exist */ 1331 EVENT_REMOTEREPLY, /* upon string reception from a remote vim */ 1332 EVENT_SWAPEXISTS, /* found existing swap file */ 1333 EVENT_SOURCEPRE, /* before sourcing a Vim script */ 1334 EVENT_SOURCECMD, /* sourcing a Vim script using command */ 1335 EVENT_SPELLFILEMISSING, /* spell file missing */ 1336 EVENT_CURSORMOVED, /* cursor was moved */ 1337 EVENT_CURSORMOVEDI, /* cursor was moved in Insert mode */ 1338 EVENT_TABENTER, /* after entering a tab page */ 1339 EVENT_TABLEAVE, /* before leaving a tab page */ 1340 EVENT_TABNEW, /* when entering a new tab page */ 1341 EVENT_TABCLOSED, /* after closing a tab page */ 1342 EVENT_SHELLCMDPOST, /* after ":!cmd" */ 1343 EVENT_SHELLFILTERPOST, /* after ":1,2!cmd", ":w !cmd", ":r !cmd". */ 1344 EVENT_TEXTCHANGED, /* text was modified */ 1345 EVENT_TEXTCHANGEDI, /* text was modified in Insert mode*/ 1346 EVENT_CMDUNDEFINED, /* command undefined */ 1347 EVENT_OPTIONSET, /* option was set */ 1348 NUM_EVENTS /* MUST be the last one */ 1349 }; 1350 1351 typedef enum auto_event event_T; 1352 1353 /* 1354 * Values for index in highlight_attr[]. 1355 * When making changes, also update HL_FLAGS below! And update the default 1356 * value of 'highlight' in option.c. 1357 */ 1358 typedef enum 1359 { 1360 HLF_8 = 0 /* Meta & special keys listed with ":map", text that is 1361 displayed different from what it is */ 1362 , HLF_AT /* @ and ~ characters at end of screen, characters that 1363 don't really exist in the text */ 1364 , HLF_D /* directories in CTRL-D listing */ 1365 , HLF_E /* error messages */ 1366 , HLF_H /* obsolete, ignored */ 1367 , HLF_I /* incremental search */ 1368 , HLF_L /* last search string */ 1369 , HLF_M /* "--More--" message */ 1370 , HLF_CM /* Mode (e.g., "-- INSERT --") */ 1371 , HLF_N /* line number for ":number" and ":#" commands */ 1372 , HLF_CLN /* current line number */ 1373 , HLF_R /* return to continue message and yes/no questions */ 1374 , HLF_S /* status lines */ 1375 , HLF_SNC /* status lines of not-current windows */ 1376 , HLF_C /* column to separate vertically split windows */ 1377 , HLF_T /* Titles for output from ":set all", ":autocmd" etc. */ 1378 , HLF_V /* Visual mode */ 1379 , HLF_VNC /* Visual mode, autoselecting and not clipboard owner */ 1380 , HLF_W /* warning messages */ 1381 , HLF_WM /* Wildmenu highlight */ 1382 , HLF_FL /* Folded line */ 1383 , HLF_FC /* Fold column */ 1384 , HLF_ADD /* Added diff line */ 1385 , HLF_CHD /* Changed diff line */ 1386 , HLF_DED /* Deleted diff line */ 1387 , HLF_TXD /* Text Changed in diff line */ 1388 , HLF_CONCEAL /* Concealed text */ 1389 , HLF_SC /* Sign column */ 1390 , HLF_SPB /* SpellBad */ 1391 , HLF_SPC /* SpellCap */ 1392 , HLF_SPR /* SpellRare */ 1393 , HLF_SPL /* SpellLocal */ 1394 , HLF_PNI /* popup menu normal item */ 1395 , HLF_PSI /* popup menu selected item */ 1396 , HLF_PSB /* popup menu scrollbar */ 1397 , HLF_PST /* popup menu scrollbar thumb */ 1398 , HLF_TP /* tabpage line */ 1399 , HLF_TPS /* tabpage line selected */ 1400 , HLF_TPF /* tabpage line filler */ 1401 , HLF_CUC /* 'cursurcolumn' */ 1402 , HLF_CUL /* 'cursurline' */ 1403 , HLF_MC /* 'colorcolumn' */ 1404 , HLF_COUNT /* MUST be the last one */ 1405 } hlf_T; 1406 1407 /* The HL_FLAGS must be in the same order as the HLF_ enums! 1408 * When changing this also adjust the default for 'highlight'. */ 1409 #define HL_FLAGS {'8', '@', 'd', 'e', 'h', 'i', 'l', 'm', 'M', \ 1410 'n', 'N', 'r', 's', 'S', 'c', 't', 'v', 'V', 'w', 'W', \ 1411 'f', 'F', 'A', 'C', 'D', 'T', '-', '>', \ 1412 'B', 'P', 'R', 'L', \ 1413 '+', '=', 'x', 'X', '*', '#', '_', '!', '.', 'o'} 1414 1415 /* 1416 * Boolean constants 1417 */ 1418 #ifndef TRUE 1419 # define FALSE 0 /* note: this is an int, not a long! */ 1420 # define TRUE 1 1421 #endif 1422 1423 #define MAYBE 2 /* sometimes used for a variant on TRUE */ 1424 1425 #ifndef UINT32_T 1426 typedef UINT32_TYPEDEF UINT32_T; 1427 #endif 1428 1429 /* 1430 * Operator IDs; The order must correspond to opchars[] in ops.c! 1431 */ 1432 #define OP_NOP 0 /* no pending operation */ 1433 #define OP_DELETE 1 /* "d" delete operator */ 1434 #define OP_YANK 2 /* "y" yank operator */ 1435 #define OP_CHANGE 3 /* "c" change operator */ 1436 #define OP_LSHIFT 4 /* "<" left shift operator */ 1437 #define OP_RSHIFT 5 /* ">" right shift operator */ 1438 #define OP_FILTER 6 /* "!" filter operator */ 1439 #define OP_TILDE 7 /* "g~" switch case operator */ 1440 #define OP_INDENT 8 /* "=" indent operator */ 1441 #define OP_FORMAT 9 /* "gq" format operator */ 1442 #define OP_COLON 10 /* ":" colon operator */ 1443 #define OP_UPPER 11 /* "gU" make upper case operator */ 1444 #define OP_LOWER 12 /* "gu" make lower case operator */ 1445 #define OP_JOIN 13 /* "J" join operator, only for Visual mode */ 1446 #define OP_JOIN_NS 14 /* "gJ" join operator, only for Visual mode */ 1447 #define OP_ROT13 15 /* "g?" rot-13 encoding */ 1448 #define OP_REPLACE 16 /* "r" replace chars, only for Visual mode */ 1449 #define OP_INSERT 17 /* "I" Insert column, only for Visual mode */ 1450 #define OP_APPEND 18 /* "A" Append column, only for Visual mode */ 1451 #define OP_FOLD 19 /* "zf" define a fold */ 1452 #define OP_FOLDOPEN 20 /* "zo" open folds */ 1453 #define OP_FOLDOPENREC 21 /* "zO" open folds recursively */ 1454 #define OP_FOLDCLOSE 22 /* "zc" close folds */ 1455 #define OP_FOLDCLOSEREC 23 /* "zC" close folds recursively */ 1456 #define OP_FOLDDEL 24 /* "zd" delete folds */ 1457 #define OP_FOLDDELREC 25 /* "zD" delete folds recursively */ 1458 #define OP_FORMAT2 26 /* "gw" format operator, keeps cursor pos */ 1459 #define OP_FUNCTION 27 /* "g@" call 'operatorfunc' */ 1460 #define OP_NR_ADD 28 /* "<C-A>" Add to the number or alphabetic 1461 character (OP_ADD conflicts with Perl) */ 1462 #define OP_NR_SUB 29 /* "<C-X>" Subtract from the number or 1463 alphabetic character */ 1464 1465 /* 1466 * Motion types, used for operators and for yank/delete registers. 1467 */ 1468 #define MCHAR 0 /* character-wise movement/register */ 1469 #define MLINE 1 /* line-wise movement/register */ 1470 #define MBLOCK 2 /* block-wise register */ 1471 1472 #define MAUTO 0xff /* Decide between MLINE/MCHAR */ 1473 1474 /* 1475 * Minimum screen size 1476 */ 1477 #define MIN_COLUMNS 12 /* minimal columns for screen */ 1478 #define MIN_LINES 2 /* minimal lines for screen */ 1479 #define STATUS_HEIGHT 1 /* height of a status line under a window */ 1480 #define QF_WINHEIGHT 10 /* default height for quickfix window */ 1481 1482 /* 1483 * Buffer sizes 1484 */ 1485 #ifndef CMDBUFFSIZE 1486 # define CMDBUFFSIZE 256 /* size of the command processing buffer */ 1487 #endif 1488 1489 #define LSIZE 512 /* max. size of a line in the tags file */ 1490 1491 #define IOSIZE (1024+1) /* file i/o and sprintf buffer size */ 1492 1493 #define DIALOG_MSG_SIZE 1000 /* buffer size for dialog_msg() */ 1494 1495 #ifdef FEAT_MBYTE 1496 # define MSG_BUF_LEN 480 /* length of buffer for small messages */ 1497 # define MSG_BUF_CLEN (MSG_BUF_LEN / 6) /* cell length (worst case: utf-8 1498 takes 6 bytes for one cell) */ 1499 #else 1500 # define MSG_BUF_LEN 80 /* length of buffer for small messages */ 1501 # define MSG_BUF_CLEN MSG_BUF_LEN /* cell length */ 1502 #endif 1503 1504 /* Size of the buffer used for tgetent(). Unfortunately this is largely 1505 * undocumented, some systems use 1024. Using a buffer that is too small 1506 * causes a buffer overrun and a crash. Use the maximum known value to stay 1507 * on the safe side. */ 1508 #define TBUFSZ 2048 /* buffer size for termcap entry */ 1509 1510 /* 1511 * Maximum length of key sequence to be mapped. 1512 * Must be able to hold an Amiga resize report. 1513 */ 1514 #define MAXMAPLEN 50 1515 1516 /* Size in bytes of the hash used in the undo file. */ 1517 #define UNDO_HASH_SIZE 32 1518 1519 #ifdef HAVE_FCNTL_H 1520 # include <fcntl.h> 1521 #endif 1522 1523 #ifdef BINARY_FILE_IO 1524 # define WRITEBIN "wb" /* no CR-LF translation */ 1525 # define READBIN "rb" 1526 # define APPENDBIN "ab" 1527 #else 1528 # define WRITEBIN "w" 1529 # define READBIN "r" 1530 # define APPENDBIN "a" 1531 #endif 1532 1533 /* 1534 * EMX doesn't have a global way of making open() use binary I/O. 1535 * Use O_BINARY for all open() calls. 1536 */ 1537 #if defined(__CYGWIN32__) 1538 # define O_EXTRA O_BINARY 1539 #else 1540 # define O_EXTRA 0 1541 #endif 1542 1543 #ifndef O_NOFOLLOW 1544 # define O_NOFOLLOW 0 1545 #endif 1546 1547 #ifndef W_OK 1548 # define W_OK 2 /* for systems that don't have W_OK in unistd.h */ 1549 #endif 1550 #ifndef R_OK 1551 # define R_OK 4 /* for systems that don't have R_OK in unistd.h */ 1552 #endif 1553 1554 /* 1555 * defines to avoid typecasts from (char_u *) to (char *) and back 1556 * (vim_strchr() and vim_strrchr() are now in alloc.c) 1557 */ 1558 #define STRLEN(s) strlen((char *)(s)) 1559 #define STRCPY(d, s) strcpy((char *)(d), (char *)(s)) 1560 #define STRNCPY(d, s, n) strncpy((char *)(d), (char *)(s), (size_t)(n)) 1561 #define STRCMP(d, s) strcmp((char *)(d), (char *)(s)) 1562 #define STRNCMP(d, s, n) strncmp((char *)(d), (char *)(s), (size_t)(n)) 1563 #ifdef HAVE_STRCASECMP 1564 # define STRICMP(d, s) strcasecmp((char *)(d), (char *)(s)) 1565 #else 1566 # ifdef HAVE_STRICMP 1567 # define STRICMP(d, s) stricmp((char *)(d), (char *)(s)) 1568 # else 1569 # define STRICMP(d, s) vim_stricmp((char *)(d), (char *)(s)) 1570 # endif 1571 #endif 1572 1573 /* Like strcpy() but allows overlapped source and destination. */ 1574 #define STRMOVE(d, s) mch_memmove((d), (s), STRLEN(s) + 1) 1575 1576 #ifdef HAVE_STRNCASECMP 1577 # define STRNICMP(d, s, n) strncasecmp((char *)(d), (char *)(s), (size_t)(n)) 1578 #else 1579 # ifdef HAVE_STRNICMP 1580 # define STRNICMP(d, s, n) strnicmp((char *)(d), (char *)(s), (size_t)(n)) 1581 # else 1582 # define STRNICMP(d, s, n) vim_strnicmp((char *)(d), (char *)(s), (size_t)(n)) 1583 # endif 1584 #endif 1585 1586 #ifdef FEAT_MBYTE 1587 /* We need to call mb_stricmp() even when we aren't dealing with a multi-byte 1588 * encoding because mb_stricmp() takes care of all ascii and non-ascii 1589 * encodings, including characters with umlauts in latin1, etc., while 1590 * STRICMP() only handles the system locale version, which often does not 1591 * handle non-ascii properly. */ 1592 1593 # define MB_STRICMP(d, s) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)MAXCOL) 1594 # define MB_STRNICMP(d, s, n) mb_strnicmp((char_u *)(d), (char_u *)(s), (int)(n)) 1595 #else 1596 # define MB_STRICMP(d, s) STRICMP((d), (s)) 1597 # define MB_STRNICMP(d, s, n) STRNICMP((d), (s), (n)) 1598 #endif 1599 1600 #define STRCAT(d, s) strcat((char *)(d), (char *)(s)) 1601 #define STRNCAT(d, s, n) strncat((char *)(d), (char *)(s), (size_t)(n)) 1602 1603 #ifdef HAVE_STRPBRK 1604 # define vim_strpbrk(s, cs) (char_u *)strpbrk((char *)(s), (char *)(cs)) 1605 #endif 1606 1607 #define MSG(s) msg((char_u *)(s)) 1608 #define MSG_ATTR(s, attr) msg_attr((char_u *)(s), (attr)) 1609 #define EMSG(s) emsg((char_u *)(s)) 1610 #define EMSG2(s, p) emsg2((char_u *)(s), (char_u *)(p)) 1611 #define EMSG3(s, p, q) emsg3((char_u *)(s), (char_u *)(p), (char_u *)(q)) 1612 #define EMSGN(s, n) emsgn((char_u *)(s), (long)(n)) 1613 #define EMSGU(s, n) emsgu((char_u *)(s), (long_u)(n)) 1614 #define OUT_STR(s) out_str((char_u *)(s)) 1615 #define OUT_STR_NF(s) out_str_nf((char_u *)(s)) 1616 #define MSG_PUTS(s) msg_puts((char_u *)(s)) 1617 #define MSG_PUTS_ATTR(s, a) msg_puts_attr((char_u *)(s), (a)) 1618 #define MSG_PUTS_TITLE(s) msg_puts_title((char_u *)(s)) 1619 #define MSG_PUTS_LONG(s) msg_puts_long_attr((char_u *)(s), 0) 1620 #define MSG_PUTS_LONG_ATTR(s, a) msg_puts_long_attr((char_u *)(s), (a)) 1621 1622 #ifdef FEAT_GUI 1623 # ifdef FEAT_TERMGUICOLORS 1624 # define GUI_FUNCTION(f) (gui.in_use ? gui_##f : termgui_##f) 1625 # define GUI_FUNCTION2(f, pixel) (gui.in_use \ 1626 ? ((pixel) != INVALCOLOR \ 1627 ? gui_##f((pixel)) \ 1628 : (long_u)INVALCOLOR) \ 1629 : termgui_##f((pixel))) 1630 # define USE_24BIT (gui.in_use || p_tgc) 1631 # else 1632 # define GUI_FUNCTION(f) gui_##f 1633 # define GUI_FUNCTION2(f,pixel) ((pixel) != INVALCOLOR \ 1634 ? gui_##f((pixel)) \ 1635 : (long_u)INVALCOLOR) 1636 # define USE_24BIT gui.in_use 1637 # endif 1638 #else 1639 # ifdef FEAT_TERMGUICOLORS 1640 # define GUI_FUNCTION(f) termgui_##f 1641 # define GUI_FUNCTION2(f, pixel) termgui_##f((pixel)) 1642 # define USE_24BIT p_tgc 1643 # endif 1644 #endif 1645 #ifdef FEAT_TERMGUICOLORS 1646 # define IS_CTERM (t_colors > 1 || p_tgc) 1647 #else 1648 # define IS_CTERM (t_colors > 1) 1649 #endif 1650 #ifdef GUI_FUNCTION 1651 # define GUI_MCH_GET_RGB GUI_FUNCTION(mch_get_rgb) 1652 # define GUI_MCH_GET_RGB2(pixel) GUI_FUNCTION2(mch_get_rgb, (pixel)) 1653 # define GUI_MCH_GET_COLOR GUI_FUNCTION(mch_get_color) 1654 # define GUI_GET_COLOR GUI_FUNCTION(get_color) 1655 #endif 1656 1657 /* Prefer using emsg3(), because perror() may send the output to the wrong 1658 * destination and mess up the screen. */ 1659 #ifdef HAVE_STRERROR 1660 # define PERROR(msg) (void)emsg3((char_u *)"%s: %s", (char_u *)msg, (char_u *)strerror(errno)) 1661 #else 1662 # define PERROR(msg) do_perror(msg) 1663 #endif 1664 1665 typedef long linenr_T; /* line number type */ 1666 typedef int colnr_T; /* column number type */ 1667 typedef unsigned short disptick_T; /* display tick type */ 1668 1669 #define MAXLNUM (0x7fffffffL) /* maximum (invalid) line number */ 1670 1671 /* 1672 * Well, you won't believe it, but some S/390 machines ("host", now also known 1673 * as zServer) use 31 bit pointers. There are also some newer machines, that 1674 * use 64 bit pointers. I don't know how to distinguish between 31 and 64 bit 1675 * machines, so the best way is to assume 31 bits whenever we detect OS/390 1676 * Unix. 1677 * With this we restrict the maximum line length to 1073741823. I guess this is 1678 * not a real problem. BTW: Longer lines are split. 1679 */ 1680 #if VIM_SIZEOF_INT >= 4 1681 # ifdef __MVS__ 1682 # define MAXCOL (0x3fffffffL) /* maximum column number, 30 bits */ 1683 # else 1684 # define MAXCOL (0x7fffffffL) /* maximum column number, 31 bits */ 1685 # endif 1686 #else 1687 # define MAXCOL (0x7fff) /* maximum column number, 15 bits */ 1688 #endif 1689 1690 #define SHOWCMD_COLS 10 /* columns needed by shown command */ 1691 #define STL_MAX_ITEM 80 /* max nr of %<flag> in statusline */ 1692 1693 typedef void *vim_acl_T; /* dummy to pass an ACL to a function */ 1694 1695 /* 1696 * Include a prototype for mch_memmove(), it may not be in alloc.pro. 1697 */ 1698 #ifdef VIM_MEMMOVE 1699 void mch_memmove(void *, void *, size_t); 1700 #else 1701 # ifndef mch_memmove 1702 # define mch_memmove(to, from, len) memmove(to, from, len) 1703 # endif 1704 #endif 1705 1706 /* 1707 * fnamecmp() is used to compare file names. 1708 * On some systems case in a file name does not matter, on others it does. 1709 * (this does not account for maximum name lengths and things like "../dir", 1710 * thus it is not 100% accurate!) 1711 */ 1712 #define fnamecmp(x, y) vim_fnamecmp((char_u *)(x), (char_u *)(y)) 1713 #define fnamencmp(x, y, n) vim_fnamencmp((char_u *)(x), (char_u *)(y), (size_t)(n)) 1714 1715 #ifdef HAVE_MEMSET 1716 # define vim_memset(ptr, c, size) memset((ptr), (c), (size)) 1717 #else 1718 void *vim_memset(void *, int, size_t); 1719 #endif 1720 1721 #ifdef HAVE_MEMCMP 1722 # define vim_memcmp(p1, p2, len) memcmp((p1), (p2), (len)) 1723 #else 1724 # ifdef HAVE_BCMP 1725 # define vim_memcmp(p1, p2, len) bcmp((p1), (p2), (len)) 1726 # else 1727 int vim_memcmp(void *, void *, size_t); 1728 # define VIM_MEMCMP 1729 # endif 1730 #endif 1731 1732 #if defined(UNIX) || defined(FEAT_GUI) || defined(VMS) \ 1733 || defined(FEAT_CLIENTSERVER) 1734 # define USE_INPUT_BUF 1735 #endif 1736 1737 #ifndef EINTR 1738 # define read_eintr(fd, buf, count) vim_read((fd), (buf), (count)) 1739 # define write_eintr(fd, buf, count) vim_write((fd), (buf), (count)) 1740 #endif 1741 1742 #ifdef MSWIN 1743 /* On MS-Windows the third argument isn't size_t. This matters for Win64, 1744 * where sizeof(size_t)==8, not 4 */ 1745 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (unsigned int)(count)) 1746 # define vim_write(fd, buf, count) write((fd), (char *)(buf), (unsigned int)(count)) 1747 #else 1748 # define vim_read(fd, buf, count) read((fd), (char *)(buf), (size_t) (count)) 1749 # define vim_write(fd, buf, count) write((fd), (char *)(buf), (size_t) (count)) 1750 #endif 1751 1752 /* 1753 * Enums need a typecast to be used as array index (for Ultrix). 1754 */ 1755 #define hl_attr(n) highlight_attr[(int)(n)] 1756 #define term_str(n) term_strings[(int)(n)] 1757 1758 /* 1759 * vim_iswhite() is used for "^" and the like. It differs from isspace() 1760 * because it doesn't include <CR> and <LF> and the like. 1761 */ 1762 #define vim_iswhite(x) ((x) == ' ' || (x) == '\t') 1763 1764 /* 1765 * EXTERN is only defined in main.c. That's where global variables are 1766 * actually defined and initialized. 1767 */ 1768 #ifndef EXTERN 1769 # define EXTERN extern 1770 # define INIT(x) 1771 #else 1772 # ifndef INIT 1773 # define INIT(x) x 1774 # define DO_INIT 1775 # define COMMA , 1776 # endif 1777 #endif 1778 1779 #ifdef FEAT_MBYTE 1780 # define MAX_MCO 6 /* maximum value for 'maxcombine' */ 1781 1782 /* Maximum number of bytes in a multi-byte character. It can be one 32-bit 1783 * character of up to 6 bytes, or one 16-bit character of up to three bytes 1784 * plus six following composing characters of three bytes each. */ 1785 # define MB_MAXBYTES 21 1786 #else 1787 # define MB_MAXBYTES 1 1788 #endif 1789 1790 #if (defined(FEAT_PROFILE) || defined(FEAT_RELTIME)) && !defined(PROTO) 1791 # ifdef WIN3264 1792 typedef LARGE_INTEGER proftime_T; 1793 # else 1794 typedef struct timeval proftime_T; 1795 # endif 1796 #else 1797 typedef int proftime_T; /* dummy for function prototypes */ 1798 #endif 1799 1800 /* 1801 * When compiling with 32 bit Perl time_t is 32 bits in the Perl code but 64 1802 * bits elsewhere. That causes memory corruption. Define time_T and use it 1803 * for global variables to avoid that. 1804 */ 1805 #ifdef WIN3264 1806 typedef __time64_t time_T; 1807 #else 1808 typedef time_t time_T; 1809 #endif 1810 1811 #ifdef _WIN64 1812 typedef __int64 sock_T; 1813 #else 1814 typedef int sock_T; 1815 #endif 1816 1817 /* Include option.h before structs.h, because the number of window-local and 1818 * buffer-local options is used there. */ 1819 #include "option.h" /* options and default values */ 1820 1821 /* Note that gui.h is included by structs.h */ 1822 1823 #include "structs.h" /* file that defines many structures */ 1824 1825 #include "alloc.h" 1826 1827 /* Values for "do_profiling". */ 1828 #define PROF_NONE 0 /* profiling not started */ 1829 #define PROF_YES 1 /* profiling busy */ 1830 #define PROF_PAUSED 2 /* profiling paused */ 1831 1832 #ifdef FEAT_MOUSE 1833 1834 /* Codes for mouse button events in lower three bits: */ 1835 # define MOUSE_LEFT 0x00 1836 # define MOUSE_MIDDLE 0x01 1837 # define MOUSE_RIGHT 0x02 1838 # define MOUSE_RELEASE 0x03 1839 1840 /* bit masks for modifiers: */ 1841 # define MOUSE_SHIFT 0x04 1842 # define MOUSE_ALT 0x08 1843 # define MOUSE_CTRL 0x10 1844 1845 /* mouse buttons that are handled like a key press (GUI only) */ 1846 /* Note that the scroll wheel keys are inverted: MOUSE_5 scrolls lines up but 1847 * the result of this is that the window moves down, similarly MOUSE_6 scrolls 1848 * columns left but the window moves right. */ 1849 # define MOUSE_4 0x100 /* scroll wheel down */ 1850 # define MOUSE_5 0x200 /* scroll wheel up */ 1851 1852 # define MOUSE_X1 0x300 /* Mouse-button X1 (6th) */ 1853 # define MOUSE_X2 0x400 /* Mouse-button X2 */ 1854 1855 # define MOUSE_6 0x500 /* scroll wheel left */ 1856 # define MOUSE_7 0x600 /* scroll wheel right */ 1857 1858 /* 0x20 is reserved by xterm */ 1859 # define MOUSE_DRAG_XTERM 0x40 1860 1861 # define MOUSE_DRAG (0x40 | MOUSE_RELEASE) 1862 1863 /* Lowest button code for using the mouse wheel (xterm only) */ 1864 # define MOUSEWHEEL_LOW 0x60 1865 1866 # define MOUSE_CLICK_MASK 0x03 1867 1868 # define NUM_MOUSE_CLICKS(code) \ 1869 (((unsigned)((code) & 0xC0) >> 6) + 1) 1870 1871 # define SET_NUM_MOUSE_CLICKS(code, num) \ 1872 (code) = ((code) & 0x3f) | ((((num) - 1) & 3) << 6) 1873 1874 /* Added to mouse column for GUI when 'mousefocus' wants to give focus to a 1875 * window by simulating a click on its status line. We could use up to 128 * 1876 * 128 = 16384 columns, now it's reduced to 10000. */ 1877 # define MOUSE_COLOFF 10000 1878 1879 /* 1880 * jump_to_mouse() returns one of first four these values, possibly with 1881 * some of the other three added. 1882 */ 1883 # define IN_UNKNOWN 0 1884 # define IN_BUFFER 1 1885 # define IN_STATUS_LINE 2 /* on status or command line */ 1886 # define IN_SEP_LINE 4 /* on vertical separator line */ 1887 # define IN_OTHER_WIN 8 /* in other window but can't go there */ 1888 # define CURSOR_MOVED 0x100 1889 # define MOUSE_FOLD_CLOSE 0x200 /* clicked on '-' in fold column */ 1890 # define MOUSE_FOLD_OPEN 0x400 /* clicked on '+' in fold column */ 1891 1892 /* flags for jump_to_mouse() */ 1893 # define MOUSE_FOCUS 0x01 /* need to stay in this window */ 1894 # define MOUSE_MAY_VIS 0x02 /* may start Visual mode */ 1895 # define MOUSE_DID_MOVE 0x04 /* only act when mouse has moved */ 1896 # define MOUSE_SETPOS 0x08 /* only set current mouse position */ 1897 # define MOUSE_MAY_STOP_VIS 0x10 /* may stop Visual mode */ 1898 # define MOUSE_RELEASED 0x20 /* button was released */ 1899 1900 # if defined(UNIX) && defined(HAVE_GETTIMEOFDAY) && defined(HAVE_SYS_TIME_H) 1901 # define CHECK_DOUBLE_CLICK 1 /* Checking for double clicks ourselves. */ 1902 # endif 1903 1904 #endif /* FEAT_MOUSE */ 1905 1906 /* defines for eval_vars() */ 1907 #define VALID_PATH 1 1908 #define VALID_HEAD 2 1909 1910 /* Defines for Vim variables. These must match vimvars[] in eval.c! */ 1911 #define VV_COUNT 0 1912 #define VV_COUNT1 1 1913 #define VV_PREVCOUNT 2 1914 #define VV_ERRMSG 3 1915 #define VV_WARNINGMSG 4 1916 #define VV_STATUSMSG 5 1917 #define VV_SHELL_ERROR 6 1918 #define VV_THIS_SESSION 7 1919 #define VV_VERSION 8 1920 #define VV_LNUM 9 1921 #define VV_TERMRESPONSE 10 1922 #define VV_FNAME 11 1923 #define VV_LANG 12 1924 #define VV_LC_TIME 13 1925 #define VV_CTYPE 14 1926 #define VV_CC_FROM 15 1927 #define VV_CC_TO 16 1928 #define VV_FNAME_IN 17 1929 #define VV_FNAME_OUT 18 1930 #define VV_FNAME_NEW 19 1931 #define VV_FNAME_DIFF 20 1932 #define VV_CMDARG 21 1933 #define VV_FOLDSTART 22 1934 #define VV_FOLDEND 23 1935 #define VV_FOLDDASHES 24 1936 #define VV_FOLDLEVEL 25 1937 #define VV_PROGNAME 26 1938 #define VV_SEND_SERVER 27 1939 #define VV_DYING 28 1940 #define VV_EXCEPTION 29 1941 #define VV_THROWPOINT 30 1942 #define VV_REG 31 1943 #define VV_CMDBANG 32 1944 #define VV_INSERTMODE 33 1945 #define VV_VAL 34 1946 #define VV_KEY 35 1947 #define VV_PROFILING 36 1948 #define VV_FCS_REASON 37 1949 #define VV_FCS_CHOICE 38 1950 #define VV_BEVAL_BUFNR 39 1951 #define VV_BEVAL_WINNR 40 1952 #define VV_BEVAL_WINID 41 1953 #define VV_BEVAL_LNUM 42 1954 #define VV_BEVAL_COL 43 1955 #define VV_BEVAL_TEXT 44 1956 #define VV_SCROLLSTART 45 1957 #define VV_SWAPNAME 46 1958 #define VV_SWAPCHOICE 47 1959 #define VV_SWAPCOMMAND 48 1960 #define VV_CHAR 49 1961 #define VV_MOUSE_WIN 50 1962 #define VV_MOUSE_WINID 51 1963 #define VV_MOUSE_LNUM 52 1964 #define VV_MOUSE_COL 53 1965 #define VV_OP 54 1966 #define VV_SEARCHFORWARD 55 1967 #define VV_HLSEARCH 56 1968 #define VV_OLDFILES 57 1969 #define VV_WINDOWID 58 1970 #define VV_PROGPATH 59 1971 #define VV_COMPLETED_ITEM 60 1972 #define VV_OPTION_NEW 61 1973 #define VV_OPTION_OLD 62 1974 #define VV_OPTION_TYPE 63 1975 #define VV_ERRORS 64 1976 #define VV_FALSE 65 1977 #define VV_TRUE 66 1978 #define VV_NULL 67 1979 #define VV_NONE 68 1980 #define VV_VIM_DID_ENTER 69 1981 #define VV_TESTING 70 1982 #define VV_TYPE_NUMBER 71 1983 #define VV_TYPE_STRING 72 1984 #define VV_TYPE_FUNC 73 1985 #define VV_TYPE_LIST 74 1986 #define VV_TYPE_DICT 75 1987 #define VV_TYPE_FLOAT 76 1988 #define VV_TYPE_BOOL 77 1989 #define VV_TYPE_NONE 78 1990 #define VV_TYPE_JOB 79 1991 #define VV_TYPE_CHANNEL 80 1992 #define VV_LEN 81 /* number of v: vars */ 1993 1994 /* used for v_number in VAR_SPECIAL */ 1995 #define VVAL_FALSE 0L 1996 #define VVAL_TRUE 1L 1997 #define VVAL_NONE 2L 1998 #define VVAL_NULL 3L 1999 2000 /* Type values for type(). */ 2001 #define VAR_TYPE_NUMBER 0 2002 #define VAR_TYPE_STRING 1 2003 #define VAR_TYPE_FUNC 2 2004 #define VAR_TYPE_LIST 3 2005 #define VAR_TYPE_DICT 4 2006 #define VAR_TYPE_FLOAT 5 2007 #define VAR_TYPE_BOOL 6 2008 #define VAR_TYPE_NONE 7 2009 #define VAR_TYPE_JOB 8 2010 #define VAR_TYPE_CHANNEL 9 2011 2012 #ifdef FEAT_CLIPBOARD 2013 2014 /* VIM_ATOM_NAME is the older Vim-specific selection type for X11. Still 2015 * supported for when a mix of Vim versions is used. VIMENC_ATOM_NAME includes 2016 * the encoding to support Vims using different 'encoding' values. */ 2017 # define VIM_ATOM_NAME "_VIM_TEXT" 2018 # define VIMENC_ATOM_NAME "_VIMENC_TEXT" 2019 2020 /* Selection states for modeless selection */ 2021 # define SELECT_CLEARED 0 2022 # define SELECT_IN_PROGRESS 1 2023 # define SELECT_DONE 2 2024 2025 # define SELECT_MODE_CHAR 0 2026 # define SELECT_MODE_WORD 1 2027 # define SELECT_MODE_LINE 2 2028 2029 # ifdef FEAT_GUI_W32 2030 # ifdef FEAT_OLE 2031 # define WM_OLE (WM_APP+0) 2032 # endif 2033 # endif 2034 2035 /* Info about selected text */ 2036 typedef struct VimClipboard 2037 { 2038 int available; /* Is clipboard available? */ 2039 int owned; /* Flag: do we own the selection? */ 2040 pos_T start; /* Start of selected area */ 2041 pos_T end; /* End of selected area */ 2042 int vmode; /* Visual mode character */ 2043 2044 /* Fields for selection that doesn't use Visual mode */ 2045 short_u origin_row; 2046 short_u origin_start_col; 2047 short_u origin_end_col; 2048 short_u word_start_col; 2049 short_u word_end_col; 2050 2051 pos_T prev; /* Previous position */ 2052 short_u state; /* Current selection state */ 2053 short_u mode; /* Select by char, word, or line. */ 2054 2055 # if defined(FEAT_GUI_X11) || defined(FEAT_XCLIPBOARD) 2056 Atom sel_atom; /* PRIMARY/CLIPBOARD selection ID */ 2057 # endif 2058 2059 # ifdef FEAT_GUI_GTK 2060 GdkAtom gtk_sel_atom; /* PRIMARY/CLIPBOARD selection ID */ 2061 # endif 2062 2063 # if defined(MSWIN) || defined(FEAT_CYGWIN_WIN32_CLIPBOARD) 2064 int_u format; /* Vim's own special clipboard format */ 2065 int_u format_raw; /* Vim's raw text clipboard format */ 2066 # endif 2067 } VimClipboard; 2068 #else 2069 typedef int VimClipboard; /* This is required for the prototypes. */ 2070 #endif 2071 2072 #ifdef __BORLANDC__ 2073 /* work around a bug in the Borland 'stat' function: */ 2074 # include <io.h> /* for access() */ 2075 2076 # define stat(a,b) (access(a,0) ? -1 : stat(a,b)) 2077 #endif 2078 2079 /* Use 64-bit stat structure if available. */ 2080 #if (defined(_MSC_VER) && (_MSC_VER >= 1300)) || defined(__MINGW32__) 2081 # define HAVE_STAT64 2082 typedef struct _stat64 stat_T; 2083 #else 2084 typedef struct stat stat_T; 2085 #endif 2086 2087 typedef enum 2088 { 2089 ASSERT_EQUAL, 2090 ASSERT_NOTEQUAL, 2091 ASSERT_MATCH, 2092 ASSERT_NOTMATCH, 2093 ASSERT_OTHER 2094 } assert_type_T; 2095 2096 #include "ex_cmds.h" /* Ex command defines */ 2097 #include "spell.h" /* spell checking stuff */ 2098 2099 #include "proto.h" /* function prototypes */ 2100 2101 /* This has to go after the include of proto.h, as proto/gui.pro declares 2102 * functions of these names. The declarations would break if the defines had 2103 * been seen at that stage. But it must be before globals.h, where error_ga 2104 * is declared. */ 2105 #if !defined(FEAT_GUI_W32) && !defined(FEAT_GUI_X11) \ 2106 && !defined(FEAT_GUI_GTK) && !defined(FEAT_GUI_MAC) 2107 # define mch_errmsg(str) fprintf(stderr, "%s", (str)) 2108 # define display_errors() fflush(stderr) 2109 # define mch_msg(str) printf("%s", (str)) 2110 #else 2111 # define USE_MCH_ERRMSG 2112 #endif 2113 2114 #ifndef FEAT_MBYTE 2115 # define after_pathsep(b, p) vim_ispathsep(*((p) - 1)) 2116 # define transchar_byte(c) transchar(c) 2117 #endif 2118 2119 #ifndef FEAT_LINEBREAK 2120 /* Without the 'numberwidth' option line numbers are always 7 chars. */ 2121 # define number_width(x) 7 2122 #endif 2123 2124 2125 #include "globals.h" /* global variables and messages */ 2126 2127 #ifndef FEAT_VIRTUALEDIT 2128 # define getvvcol(w, p, s, c, e) getvcol(w, p, s, c, e) 2129 # define virtual_active() FALSE 2130 # define virtual_op FALSE 2131 #endif 2132 2133 /* 2134 * If console dialog not supported, but GUI dialog is, use the GUI one. 2135 */ 2136 #if defined(FEAT_GUI_DIALOG) && !defined(FEAT_CON_DIALOG) 2137 # define do_dialog gui_mch_dialog 2138 #endif 2139 2140 /* 2141 * Default filters for gui_mch_browse(). 2142 * The filters are almost system independent. Except for the difference 2143 * between "*" and "*.*" for MSDOS-like systems. 2144 * NOTE: Motif only uses the very first pattern. Therefore 2145 * BROWSE_FILTER_DEFAULT should start with a "*" pattern. 2146 */ 2147 #ifdef FEAT_BROWSE 2148 # ifdef BACKSLASH_IN_FILENAME 2149 # define BROWSE_FILTER_MACROS \ 2150 (char_u *)"Vim macro files (*.vim)\t*.vim\nAll Files (*.*)\t*.*\n" 2151 # define BROWSE_FILTER_ALL_FILES (char_u *)"All Files (*.*)\t*.*\n" 2152 # define BROWSE_FILTER_DEFAULT \ 2153 (char_u *)"All Files (*.*)\t*.*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVB code (*.bas, *.frm)\t*.bas;*.frm\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n" 2154 # else 2155 # define BROWSE_FILTER_MACROS \ 2156 (char_u *)"Vim macro files (*.vim)\t*.vim\nAll Files (*)\t*\n" 2157 # define BROWSE_FILTER_ALL_FILES (char_u *)"All Files (*)\t*\n" 2158 # define BROWSE_FILTER_DEFAULT \ 2159 (char_u *)"All Files (*)\t*\nC source (*.c, *.h)\t*.c;*.h\nC++ source (*.cpp, *.hpp)\t*.cpp;*.hpp\nVim files (*.vim, _vimrc, _gvimrc)\t*.vim;_vimrc;_gvimrc\n" 2160 # endif 2161 # define BROWSE_SAVE 1 /* flag for do_browse() */ 2162 # define BROWSE_DIR 2 /* flag for do_browse() */ 2163 #endif 2164 2165 /* stop using fastcall for Borland */ 2166 #if defined(__BORLANDC__) && defined(WIN32) && !defined(DEBUG) 2167 #pragma option -p. 2168 #endif 2169 2170 #ifdef _MSC_VER 2171 /* Avoid useless warning "conversion from X to Y of greater size". */ 2172 #pragma warning(disable : 4312) 2173 /* Avoid warning for old style function declarators */ 2174 #pragma warning(disable : 4131) 2175 /* Avoid warning for conversion to type with smaller range */ 2176 #pragma warning(disable : 4244) 2177 /* Avoid warning for conversion to larger size */ 2178 #pragma warning(disable : 4306) 2179 /* Avoid warning for unreferenced formal parameter */ 2180 #pragma warning(disable : 4100) 2181 /* Avoid warning for differs in indirection to slightly different base type */ 2182 #pragma warning(disable : 4057) 2183 /* Avoid warning for constant conditional expression */ 2184 #pragma warning(disable : 4127) 2185 /* Avoid warning for assignment within conditional */ 2186 #pragma warning(disable : 4706) 2187 #endif 2188 2189 /* Note: a NULL argument for vim_realloc() is not portable, don't use it. */ 2190 #if defined(MEM_PROFILE) 2191 # define vim_realloc(ptr, size) mem_realloc((ptr), (size)) 2192 #else 2193 # define vim_realloc(ptr, size) realloc((ptr), (size)) 2194 #endif 2195 2196 /* 2197 * The following macros stop display/event loop nesting at the wrong time. 2198 */ 2199 #ifdef ALT_X_INPUT 2200 # define ALT_INPUT_LOCK_OFF suppress_alternate_input = FALSE 2201 # define ALT_INPUT_LOCK_ON suppress_alternate_input = TRUE 2202 #endif 2203 2204 #ifdef FEAT_MBYTE 2205 /* 2206 * Return byte length of character that starts with byte "b". 2207 * Returns 1 for a single-byte character. 2208 * MB_BYTE2LEN_CHECK() can be used to count a special key as one byte. 2209 * Don't call MB_BYTE2LEN(b) with b < 0 or b > 255! 2210 */ 2211 # define MB_BYTE2LEN(b) mb_bytelen_tab[b] 2212 # define MB_BYTE2LEN_CHECK(b) (((b) < 0 || (b) > 255) ? 1 : mb_bytelen_tab[b]) 2213 #endif 2214 2215 #if defined(FEAT_MBYTE) || defined(FEAT_POSTSCRIPT) 2216 /* properties used in enc_canon_table[] (first three mutually exclusive) */ 2217 # define ENC_8BIT 0x01 2218 # define ENC_DBCS 0x02 2219 # define ENC_UNICODE 0x04 2220 2221 # define ENC_ENDIAN_B 0x10 /* Unicode: Big endian */ 2222 # define ENC_ENDIAN_L 0x20 /* Unicode: Little endian */ 2223 2224 # define ENC_2BYTE 0x40 /* Unicode: UCS-2 */ 2225 # define ENC_4BYTE 0x80 /* Unicode: UCS-4 */ 2226 # define ENC_2WORD 0x100 /* Unicode: UTF-16 */ 2227 2228 # define ENC_LATIN1 0x200 /* Latin1 */ 2229 # define ENC_LATIN9 0x400 /* Latin9 */ 2230 # define ENC_MACROMAN 0x800 /* Mac Roman (not Macro Man! :-) */ 2231 #endif 2232 2233 #ifdef FEAT_MBYTE 2234 # ifdef USE_ICONV 2235 # ifndef EILSEQ 2236 # define EILSEQ 123 2237 # endif 2238 # ifdef DYNAMIC_ICONV 2239 /* On Win32 iconv.dll is dynamically loaded. */ 2240 # define ICONV_ERRNO (*iconv_errno()) 2241 # define ICONV_E2BIG 7 2242 # define ICONV_EINVAL 22 2243 # define ICONV_EILSEQ 42 2244 # else 2245 # define ICONV_ERRNO errno 2246 # define ICONV_E2BIG E2BIG 2247 # define ICONV_EINVAL EINVAL 2248 # define ICONV_EILSEQ EILSEQ 2249 # endif 2250 # endif 2251 2252 #endif 2253 2254 /* ISSYMLINK(mode) tests if a file is a symbolic link. */ 2255 #if (defined(S_IFMT) && defined(S_IFLNK)) || defined(S_ISLNK) 2256 # define HAVE_ISSYMLINK 2257 # if defined(S_IFMT) && defined(S_IFLNK) 2258 # define ISSYMLINK(mode) (((mode) & S_IFMT) == S_IFLNK) 2259 # else 2260 # define ISSYMLINK(mode) S_ISLNK(mode) 2261 # endif 2262 #endif 2263 2264 #define SIGN_BYTE 1 /* byte value used where sign is displayed; 2265 attribute value is sign type */ 2266 2267 #ifdef FEAT_NETBEANS_INTG 2268 # define MULTISIGN_BYTE 2 /* byte value used where sign is displayed if 2269 multiple signs exist on the line */ 2270 #endif 2271 2272 #if defined(FEAT_GUI) && defined(FEAT_XCLIPBOARD) 2273 # ifdef FEAT_GUI_GTK 2274 /* Avoid using a global variable for the X display. It's ugly 2275 * and is likely to cause trouble in multihead environments. */ 2276 # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : xterm_dpy) 2277 # else 2278 # define X_DISPLAY (gui.in_use ? gui.dpy : xterm_dpy) 2279 # endif 2280 #else 2281 # ifdef FEAT_GUI 2282 # ifdef FEAT_GUI_GTK 2283 # define X_DISPLAY ((gui.in_use) ? gui_mch_get_display() : (Display *)NULL) 2284 # else 2285 # define X_DISPLAY gui.dpy 2286 # endif 2287 # else 2288 # define X_DISPLAY xterm_dpy 2289 # endif 2290 #endif 2291 2292 #if defined(FEAT_BROWSE) && defined(GTK_CHECK_VERSION) 2293 # if GTK_CHECK_VERSION(2,4,0) 2294 # define USE_FILE_CHOOSER 2295 # endif 2296 #endif 2297 2298 #ifndef FEAT_NETBEANS_INTG 2299 # undef NBDEBUG 2300 #endif 2301 #ifdef NBDEBUG /* Netbeans debugging. */ 2302 # include "nbdebug.h" 2303 #else 2304 # define nbdebug(a) 2305 #endif 2306 2307 #ifdef IN_PERL_FILE 2308 /* 2309 * Avoid clashes between Perl and Vim namespace. 2310 */ 2311 # undef NORMAL 2312 # undef STRLEN 2313 # undef FF 2314 # undef OP_DELETE 2315 # undef OP_JOIN 2316 # ifdef __BORLANDC__ 2317 # define NOPROTO 1 2318 # endif 2319 /* remove MAX and MIN, included by glib.h, redefined by sys/param.h */ 2320 # ifdef MAX 2321 # undef MAX 2322 # endif 2323 # ifdef MIN 2324 # undef MIN 2325 # endif 2326 /* We use _() for gettext(), Perl uses it for function prototypes... */ 2327 # ifdef _ 2328 # undef _ 2329 # endif 2330 # ifdef DEBUG 2331 # undef DEBUG 2332 # endif 2333 # ifdef _DEBUG 2334 # undef _DEBUG 2335 # endif 2336 # ifdef instr 2337 # undef instr 2338 # endif 2339 /* bool may cause trouble on MACOS but is required on a few other systems 2340 * and for Perl */ 2341 # if defined(bool) && defined(MACOS) && !defined(FEAT_PERL) 2342 # undef bool 2343 # endif 2344 2345 # ifdef __BORLANDC__ 2346 /* Borland has the structure stati64 but not _stati64 */ 2347 # define _stati64 stati64 2348 # endif 2349 #endif 2350 2351 /* values for vim_handle_signal() that are not a signal */ 2352 #define SIGNAL_BLOCK -1 2353 #define SIGNAL_UNBLOCK -2 2354 #if !defined(UNIX) && !defined(VMS) 2355 # define vim_handle_signal(x) 0 2356 #endif 2357 2358 /* flags for skip_vimgrep_pat() */ 2359 #define VGR_GLOBAL 1 2360 #define VGR_NOJUMP 2 2361 2362 /* behavior for bad character, "++bad=" argument */ 2363 #define BAD_REPLACE '?' /* replace it with '?' (default) */ 2364 #define BAD_KEEP -1 /* leave it */ 2365 #define BAD_DROP -2 /* erase it */ 2366 2367 /* last argument for do_source() */ 2368 #define DOSO_NONE 0 2369 #define DOSO_VIMRC 1 /* loading vimrc file */ 2370 #define DOSO_GVIMRC 2 /* loading gvimrc file */ 2371 2372 /* flags for read_viminfo() and children */ 2373 #define VIF_WANT_INFO 1 /* load non-mark info */ 2374 #define VIF_WANT_MARKS 2 /* load file marks */ 2375 #define VIF_FORCEIT 4 /* overwrite info already read */ 2376 #define VIF_GET_OLDFILES 8 /* load v:oldfiles */ 2377 2378 /* flags for buf_freeall() */ 2379 #define BFA_DEL 1 /* buffer is going to be deleted */ 2380 #define BFA_WIPE 2 /* buffer is going to be wiped out */ 2381 #define BFA_KEEP_UNDO 4 /* do not free undo information */ 2382 2383 /* direction for nv_mousescroll() and ins_mousescroll() */ 2384 #define MSCR_DOWN 0 /* DOWN must be FALSE */ 2385 #define MSCR_UP 1 2386 #define MSCR_LEFT -1 2387 #define MSCR_RIGHT -2 2388 2389 #define KEYLEN_PART_KEY -1 /* keylen value for incomplete key-code */ 2390 #define KEYLEN_PART_MAP -2 /* keylen value for incomplete mapping */ 2391 #define KEYLEN_REMOVED 9999 /* keylen value for removed sequence */ 2392 2393 /* Return values from win32_fileinfo(). */ 2394 #define FILEINFO_OK 0 2395 #define FILEINFO_ENC_FAIL 1 /* enc_to_utf16() failed */ 2396 #define FILEINFO_READ_FAIL 2 /* CreateFile() failed */ 2397 #define FILEINFO_INFO_FAIL 3 /* GetFileInformationByHandle() failed */ 2398 2399 /* Return value from get_option_value_strict */ 2400 #define SOPT_BOOL 0x01 /* Boolean option */ 2401 #define SOPT_NUM 0x02 /* Number option */ 2402 #define SOPT_STRING 0x04 /* String option */ 2403 #define SOPT_GLOBAL 0x08 /* Option has global value */ 2404 #define SOPT_WIN 0x10 /* Option has window-local value */ 2405 #define SOPT_BUF 0x20 /* Option has buffer-local value */ 2406 #define SOPT_UNSET 0x40 /* Option does not have local value set */ 2407 2408 /* Option types for various functions in option.c */ 2409 #define SREQ_GLOBAL 0 /* Request global option */ 2410 #define SREQ_WIN 1 /* Request window-local option */ 2411 #define SREQ_BUF 2 /* Request buffer-local option */ 2412 2413 /* Flags for get_reg_contents */ 2414 #define GREG_NO_EXPR 1 /* Do not allow expression register */ 2415 #define GREG_EXPR_SRC 2 /* Return expression itself for "=" register */ 2416 #define GREG_LIST 4 /* Return list */ 2417 2418 /* Character used as separated in autoload function/variable names. */ 2419 #define AUTOLOAD_CHAR '#' 2420 2421 #ifdef FEAT_EVAL 2422 # define SET_NO_HLSEARCH(flag) no_hlsearch = (flag); set_vim_var_nr(VV_HLSEARCH, !no_hlsearch && p_hls) 2423 #else 2424 # define SET_NO_HLSEARCH(flag) no_hlsearch = (flag) 2425 #endif 2426 2427 #ifdef FEAT_JOB_CHANNEL 2428 # define MAX_OPEN_CHANNELS 10 2429 #else 2430 # define MAX_OPEN_CHANNELS 0 2431 #endif 2432 2433 /* Options for json_encode() and json_decode. */ 2434 #define JSON_JS 1 /* use JS instead of JSON */ 2435 #define JSON_NO_NONE 2 /* v:none item not allowed */ 2436 2437 #ifdef FEAT_MZSCHEME 2438 /* this is in main.c, cproto can't handle it. */ 2439 int vim_main2(int argc, char **argv); 2440 #endif 2441 2442 /* Used for flags of do_in_path() */ 2443 #define DIP_ALL 0x01 /* all matches, not just the first one */ 2444 #define DIP_DIR 0x02 /* find directories instead of files. */ 2445 #define DIP_ERR 0x04 /* give an error message when none found. */ 2446 #define DIP_START 0x08 /* also use "start" directory in 'packpath' */ 2447 #define DIP_OPT 0x10 /* also use "opt" directory in 'packpath' */ 2448 #define DIP_NORTP 0x20 /* do not use 'runtimepath' */ 2449 2450 /* Lowest number used for window ID. Cannot have this many windows. */ 2451 #define LOWEST_WIN_ID 1000 2452 2453 /* Used by the garbage collector. */ 2454 #define COPYID_INC 2 2455 #define COPYID_MASK (~0x1) 2456 2457 /* Values for trans_function_name() argument: */ 2458 #define TFN_INT 1 /* internal function name OK */ 2459 #define TFN_QUIET 2 /* no error messages */ 2460 #define TFN_NO_AUTOLOAD 4 /* do not use script autoloading */ 2461 #define TFN_NO_DEREF 8 /* do not dereference a Funcref */ 2462 2463 /* Values for get_lval() flags argument: */ 2464 #define GLV_QUIET TFN_QUIET /* no error messages */ 2465 #define GLV_NO_AUTOLOAD TFN_NO_AUTOLOAD /* do not use script autoloading */ 2466 2467 #define DO_NOT_FREE_CNT 99999 /* refcount for dict or list that should not 2468 be freed. */ 2469 2470 /* errors for when calling a function */ 2471 #define ERROR_UNKNOWN 0 2472 #define ERROR_TOOMANY 1 2473 #define ERROR_TOOFEW 2 2474 #define ERROR_SCRIPT 3 2475 #define ERROR_DICT 4 2476 #define ERROR_NONE 5 2477 #define ERROR_OTHER 6 2478 2479 /* flags for find_name_end() */ 2480 #define FNE_INCL_BR 1 /* include [] in name */ 2481 #define FNE_CHECK_START 2 /* check name starts with valid character */ 2482 2483 #endif /* VIM__H */ 2484