1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples (can only use one!): 321#CONF_ARGS = --exec-prefix=/usr 322#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 323#CONF_ARGS = --with-global-runtime=/etc/vim 324#CONF_ARGS = --with-local-dir=/usr/share 325#CONF_ARGS = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406# This requires at least "normal" features, "tiny" and "small" don't work. 407#CONF_OPT_LUA = --enable-luainterp 408#CONF_OPT_LUA = --enable-luainterp=dynamic 409#CONF_OPT_LUA = --enable-luainterp --with-luajit 410#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 411# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 412#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 413 414# MZSCHEME 415# Uncomment this when you want to include the MzScheme interface. 416# NOTE: does not work well together with valgrind. 417#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 418# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 420#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 421#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 422 423# PERL 424# Uncomment one of these when you want to include the Perl interface. 425# First one is for static linking, second one for dynamic loading. 426# The Perl option sometimes causes problems, because it adds extra flags 427# 428# to the command line. If you see strange flags during compilation, check in 429# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 430# the next line. 431# When you get an error for a missing "perl.exp" file, try creating an empty 432# one: "touch perl.exp". 433# This requires at least "normal" features, "tiny" and "small" don't work. 434#CONF_OPT_PERL = --enable-perlinterp 435#CONF_OPT_PERL = --enable-perlinterp=dynamic 436 437# PYTHON 438# Uncomment lines here when you want to include the Python interface. 439# This requires at least "normal" features, "tiny" and "small" don't work. 440# NOTE: This may cause threading to be enabled, which has side effects (such 441# as using different libraries and debugging becomes more difficult). 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7 450#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 451#CONF_OPT_PYTHON3 = --enable-python3interp 452#CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6 453#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 454 455# RUBY 456# Uncomment this when you want to include the Ruby interface. 457# First one for static linking, second one for loading when used. 458# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 459# This requires at least "normal" features, "tiny" and "small" don't work. 460#CONF_OPT_RUBY = --enable-rubyinterp 461#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 462#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 463 464# TCL 465# Uncomment this when you want to include the Tcl interface. 466# First one is for static linking, second one for dynamic loading. 467#CONF_OPT_TCL = --enable-tclinterp 468#CONF_OPT_TCL = --enable-tclinterp=dynamic 469#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 470 471# CSCOPE 472# Uncomment this when you want to include the Cscope interface. 473#CONF_OPT_CSCOPE = --enable-cscope 474 475# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 476#CONF_OPT_WORKSHOP = --enable-workshop 477 478# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 479# Motif version must have XPM libraries (see |workshop-xpm|). 480# Uncomment this when you do not want the netbeans interface. 481#CONF_OPT_NETBEANS = --disable-netbeans 482 483# CHANNEL - inter process communication. Same conditions as NetBeans. 484# Uncomment this when you do not want inter process communication. 485#CONF_OPT_CHANNEL = --disable-channel 486 487# TERMINAL - Terminal emulator support, :terminal command. Requires the 488# channel feature. The default is enable for when using "huge" features. 489# Uncomment the first line when you want terminal emulator support for 490# not-huge builds. Uncomment the second line when you don't want terminal 491# emulator support in the huge build. 492#CONF_OPT_TERMINAL = --enable-terminal 493#CONF_OPT_TERMINAL = --disable-terminal 494 495# MULTIBYTE - To edit multi-byte characters. 496# Uncomment this when you want to edit a multibyte language. 497# It's automatically enabled with normal features, GTK or IME support. 498# Note: Compile on a machine where setlocale() actually works, otherwise the 499# configure tests may fail. 500#CONF_OPT_MULTIBYTE = --enable-multibyte 501 502# When building with at least "big" features, right-left, Arabic and Farsi 503# features are enabled. Use this to disable them. 504#CONF_OPT_MULTIBYTE = --disable-rightleft --disable-farsi --disable-arabic 505 506# NLS - National Language Support 507# Uncomment this when you do not want to support translated messages, even 508# though configure can find support for it. 509#CONF_OPT_NLS = --disable-nls 510 511# XIM - X Input Method. Special character input support for X11 (Chinese, 512# Japanese, special symbols, etc). Also needed for dead-key support. 513# When omitted it's automatically enabled for the X-windows GUI. 514# HANGUL - Input Hangul (Korean) language using internal routines. 515# Uncomment one of these when you want to input a multibyte language. 516#CONF_OPT_INPUT = --enable-xim 517#CONF_OPT_INPUT = --disable-xim 518#CONF_OPT_INPUT = --enable-hangulinput 519 520# FONTSET - X fontset support for output of languages with many characters. 521# Uncomment this when you want to output a multibyte language. 522#CONF_OPT_OUTPUT = --enable-fontset 523 524# ACL - Uncomment this when you do not want to include ACL support, even 525# though your system does support it. E.g., when it's buggy. 526#CONF_OPT_ACL = --disable-acl 527 528# gpm - For mouse support on Linux console via gpm 529# Uncomment this when you do not want to include gpm support, even 530# though you have gpm libraries and includes. 531#CONF_OPT_GPM = --disable-gpm 532 533# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 534# Uncomment this when you do not want do include sysmouse support, even 535# though you have /dev/sysmouse and includes. 536#CONF_OPT_SYSMOUSE = --disable-sysmouse 537 538# FEATURES - For creating Vim with more or less features 539# Uncomment one of these lines when you want to include few to many features. 540# The default is "huge" for most systems. 541#CONF_OPT_FEAT = --with-features=tiny 542#CONF_OPT_FEAT = --with-features=small 543#CONF_OPT_FEAT = --with-features=normal 544#CONF_OPT_FEAT = --with-features=big 545#CONF_OPT_FEAT = --with-features=huge 546 547# COMPILED BY - For including a specific e-mail address for ":version". 548#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 549 550# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 551# (otherwise Vim configure will try to include xterm titlebar access) 552# Also disable the GUI above, otherwise it will be included anyway. 553# When both GUI and X11 have been disabled this may save about 15% of the 554# code and make Vim startup quicker. 555#CONF_OPT_X = --without-x 556 557# X WINDOWS DIRECTORY - specify X directories 558# If configure can't find you X stuff, or if you have multiple X11 derivatives 559# installed, you may wish to specify which one to use. 560# Select nothing to let configure choose. 561# This here selects openwin (as found on sun). 562#XROOT = /usr/openwin 563#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 564 565# X11 Session Management Protocol support 566# Vim will try to use XSMP to catch the user logging out if there are unsaved 567# files. Uncomment this line to disable that (it prevents vim trying to open 568# communications with the session manager). 569#CONF_OPT_XSMP = --disable-xsmp 570 571# You may wish to include xsmp but use exclude xsmp-interact if the logout 572# XSMP functionality does not work well with your session-manager (at time of 573# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 574# applications after Vim has cancelled a logout (until Vim quits). This 575# *might* be the Vim code, but is more likely a bug in early GNOME-1. 576# This disables the dialog that asks you if you want to save files or not. 577#CONF_OPT_XSMP = --disable-xsmp-interact 578 579# If you want to always automatically add a servername, also in the terminal. 580#CONF_OPT_AUTOSERVE = --enable-autoservername 581 582# COMPILER - Name of the compiler {{{1 583# The default from configure will mostly be fine, no need to change this, just 584# an example. If a compiler is defined here, configure will use it rather than 585# probing for one. It is dangerous to change this after configure was run. 586# Make will use your choice then -- but beware: Many things may change with 587# another compiler. It is wise to run 'make reconfig' to start all over 588# again. 589#CC = cc 590#CC = gcc 591#CC = clang 592 593# COMPILER FLAGS - change as you please. Either before running {{{1 594# configure or afterwards. For examples see below. 595# When using -g with some older versions of Linux you might get a 596# statically linked executable. 597# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 598#CFLAGS = -g 599#CFLAGS = -O 600 601# Optimization limits - depends on the compiler. Automatic check in configure 602# doesn't work very well, because many compilers only give a warning for 603# unrecognized arguments. 604#CFLAGS = -O -OPT:Olimit=2600 605#CFLAGS = -O -Olimit 2000 606#CFLAGS = -O -FOlimit,2000 607 608# Often used for GCC: mixed optimizing, lot of optimizing, debugging 609#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 610#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 611#CFLAGS = -g -Wall -Wmissing-prototypes 612#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 613#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 614#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 615 616# Use this with GCC to check for mistakes, unused arguments, etc. 617#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 618# Add -Wpedantic to find // comments and other C99 constructs. 619# Better disable Perl and Python to avoid a lot of warnings. 620#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 621#CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 622#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 623#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 624 625# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 626# allocated memory (and makes every malloc()/free() very slow). 627# Electric Fence is free (search ftp sites). 628# You may want to set the EF_PROTECT_BELOW environment variable to check the 629# other side of allocated memory. 630# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 631# as root: sysctl -w vm.max_proc_mmap=30000 632#EXTRA_LIBS = /usr/local/lib/libefence.a 633 634# Autoconf binary. 635AUTOCONF = autoconf 636 637# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 638#PURIFY = purify 639 640# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 641# Used for the unittest targets. 642# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 643 644# NBDEBUG - debugging the netbeans interface. 645#EXTRA_DEFS = -DNBDEBUG 646 647# }}} 648 649# LINT - for running lint 650# For standard Unix lint 651LINT = lint 652LINT_OPTIONS = -beprxzF 653# For splint 654# It doesn't work well, crashes on include files and non-ascii characters. 655#LINT = splint 656#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 657 658# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 659# Might not work with GUI or Perl. 660# After running Vim see the profile result with: gprof vim gmon.out | vim - 661# Need to recompile everything after changing this: "make clean" "make". 662#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 663#PROFILE_LIBS = -pg 664 665# GCC 5 and later need the -no-pie argument. 666#PROFILE_LIBS = -pg -no-pie 667 668# For unknown reasons adding "-lc" fixes a linking problem with some versions 669# of GCC. That's probably a bug in the "-pg" implementation. 670#PROFILE_LIBS = -pg -lc 671 672 673# TEST COVERAGE - Uncomment the two lines below the explanation to get code 674# coverage information. (provided by Yegappan Lakshmanan) 675# 1. make clean, run configure and build Vim as usual. 676# 2. Generate the baseline code coverage information: 677# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 678# 3. Run "make test" to run the unit tests. The code coverage information will 679# be generated in the src/objects directory. 680# 4. Generate the code coverage information from the tests: 681# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 682# 5. Combine the baseline and test code coverage data: 683# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 684# 6. Process the test coverage data and generate a report in html: 685# $ genhtml objects/coverage_total.info -o objects 686# 7. Open the objects/index.html file in a web browser to view the coverage 687# information. 688# 689# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 690# LDFLAGS=--coverage 691 692 693# Uncomment one of the next two lines to compile Vim with the 694# address sanitizer or with the undefined sanitizer. Works with gcc and 695# clang. May make Vim twice as slow. Errors reported on stderr. 696# More at: https://code.google.com/p/address-sanitizer/ 697#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 698#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 699SANITIZER_LIBS = $(SANITIZER_CFLAGS) 700 701# MEMORY LEAK DETECTION 702# Requires installing the ccmalloc library. 703# Configuration is in the .ccmalloc or ~/.ccmalloc file. 704# Doesn't work very well, since memory linked to from global variables 705# (in libraries) is also marked as leaked memory. 706#LEAK_CFLAGS = -DEXITFREE 707#LEAK_LIBS = -lccmalloc 708 709# Uncomment this line to have Vim call abort() when an internal error is 710# detected. Useful when using a tool to find errors. 711#ABORT_CLFAGS = -DABORT_ON_INTERNAL_ERROR 712 713##################################################### 714### Specific systems, check if yours is listed! ### {{{ 715##################################################### 716 717### Uncomment things here only if the values chosen by configure are wrong. 718### It's better to adjust configure.ac and "make autoconf", if you can! 719### Then send the required changes to configure.ac to the bugs list. 720 721### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 722### 723#CC = shlicc2 724#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 725 726### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 727### The first probably works on all systems 728### The second should work a bit better on newer systems 729### The third should work a bit better on HPUX 11.11 730### Information provided by: Richard Allen <[email protected]> 731#CC = c89 -D_HPUX_SOURCE 732#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 733#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 734 735### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 736### when the default (ISO) digraphs look completely wrong. 737### After changing this do "touch digraph.c; make". 738#EXTRA_DEFS = -DHPUX_DIGRAPHS 739 740### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 741### is too small to compile many routines. It produces too much defining 742### and no space errors. 743### Uncomment the following to specify a larger macro definition table. 744#CFLAGS = -Wp,-H256000 745 746### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 747### libraries in /usr/lib instead of /lib (avoiding transition links). 748### Information provided by: David Green 749#XROOT = /usr 750#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 751#GUI_INC_LOC = -I/usr/include/Motif1.2 752#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 753 754### (5) AIX 4.1.4 with cc 755#CFLAGS = -O -qmaxmem=8192 756 757### AIX with c89 (Walter Briscoe) 758#CC = c89 759#CPPFLAGS = -D_ALL_SOURCE 760 761### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 762# needed to avoid a problem where strings.h gets included 763#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 764 765### (W) Solaris with multi-threaded libraries (-lthread): 766### If suspending doesn't work properly, try using this line: 767#EXTRA_DEFS = -D_REENTRANT 768 769### (7) Solaris 2.4/2.5 with Centerline compiler 770#CC = clcc 771#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 772#CFLAGS = -O 773 774### (9) Solaris 2.x with cc (SunPro), using Athena. 775### Only required for compiling gui_at_sb.c. 776### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 777### Use one of the lines (either Full ANSI or no ANSI at all) 778#CFLAGS = $(CFLAGS) -Xc 779#CFLAGS = $(CFLAGS) -Xs 780 781### Solaris 2.3 with X11 and specific cc 782#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 783 784### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 785#CC = /usr/ucb/cc 786#EXTRA_LIBS = -R/usr/ucblib 787 788### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 789# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 790#CC = cc 791#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 792#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 793#XPM_IPATH = -I$(XPM_DIR)/include 794#EXTRA_LIBS = $(XPM_LIB) 795#EXTRA_IPATHS = $(XPM_IPATH) 796#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 797 798### Solaris with workshop compilers: Vim is unstable when compiled with 799# "-fast". Use this instead. (Shea Martin) 800#CFLAGS = -x02 -xtarget=ultra 801 802### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 803#LDFLAGS = -lw -ldl -lXmu 804#GUI_LIB_LOC = -L/usr/local/lib 805 806### (8) Unisys 6035 (Glauber Ribeiro) 807#EXTRA_LIBS = -lnsl -lsocket -lgen 808 809### When builtin functions cause problems with gcc (for Sun 4.1.x) 810#CFLAGS = -O2 -Wall -traditional -Wno-implicit 811 812### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 813#EXTRA_DEFS = -DDOMAIN 814#CFLAGS= -O -A systype,bsd4.3 815 816### Coherent 4.2.10 on Intel 386 platform 817#EXTRA_DEFS = -Dvoid=int 818#EXTRA_LIBS = -lterm -lsocket 819 820### SCO 3.2, with different library name for terminfo 821#EXTRA_LIBS = -ltinfo 822 823### UTS2 for Amdahl UTS 2.1.x 824#EXTRA_DEFS = -DUTS2 825#EXTRA_LIBS = -lsocket 826 827### UTS4 for Amdahl UTS 4.x 828#EXTRA_DEFS = -DUTS4 -Xa 829 830### USL for Unix Systems Laboratories (SYSV 4.2) 831#EXTRA_DEFS = -DUSL 832 833### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 834#CC= gcc -D_POSIX_SOURCE 835#CFLAGS= -O2 836#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 837 838### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 839### Also use the CONF_TERM_LIB below! 840#EXTRA_LIBS = -lgen 841 842### (D) QNX (by G.F. Desrochers) 843#CFLAGS = -g -O -mf -4 844 845### (F) QNX (by John Oleynick) 846# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 847# CONF_OPT_X = --without-x. 848# 2. make config 849# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 850# have -ldir (does config find it somewhere?) and -ltermcap has at 851# least one problem so I use termlib.o instead. The problem with 852# termcap is that it segfaults if you call it with the name of 853# a non-existent terminal type. 854# 4. edit auto/config.h and add #define USE_TMPNAM 855# 5. add termlib.o to OBJ 856# 6. make 857 858### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 859#EXTRA_LIBS = -lgen 860 861### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 862#EXTRA_LIBS = -lgen -lnsl 863### For SINIX-Y this is needed for the right prototype of gettimeofday() 864#EXTRA_DEFS = -D_XPG_IV 865 866### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 867# Use both "-F O3" lines for optimization or the "-g" line for debugging 868#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 869#CFLAGS = -F O3 -DSINIXN 870#LDFLAGS = -F O3 871#CFLAGS = -g -DSINIXN 872 873### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 874#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 875#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 876 877### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 878#GUI_INC_LOC = -I/usr/include 879#GUI_LIB_LOC = -L/usr/lib 880#EXTRA_LIBS = -lgen 881 882### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 883#GUI_INC_LOC = -I/usr/necccs/include 884#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 885#XROOT = /usr/necccs 886#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 887#EXTRA_LIBS = -lsocket -lgen 888 889### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 890# Not needed for Irix 5.3, Ives Aerts reported 891#EXTRA_LIBS = -lmalloc -lc_s 892# Irix 4.0, when regexp and regcmp cannot be found when linking: 893#EXTRA_LIBS = -lmalloc -lc_s -lPW 894 895### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 896# Note: This newer option style is used with the MipsPro compilers ONLY if 897# you are compiling an "n32" or "64" ABI binary (use either a -n32 898# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 899# then the CFLAGS option format will be the typical style (i.e. 900# -Olimit 3000). 901#CFLAGS = -OPT:Olimit=3000 -O 902 903### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 904# compiler features! Beware, the optimization is EXTREMELY thorough 905# and takes quite a long time. 906# Note: See the note above. Here, the -mips3 option automatically 907# enables either the "n32" or "64" ABI, depending on what machine you 908# are compiling on (n32 is explicitly enabled here, just to make sure). 909#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 910#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 911 912### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 913### Suggested by Jon Wright <[email protected]>. 914### Tested on R8000 IRIX6.1 Power Indigo2. 915### Check /etc/compiler.defaults for your compiler settings. 916# either (for 64 bit pointers) uncomment the following line 917#GUI_LIB_LOC = -L/usr/lib64 918# then 919# 1) make config 920# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 921# 3) make 922# 923# or (for 32bit pointers) uncomment the following line 924#EXTRA_DEFS = -n32 925#GUI_LIB_LOC = -L/usr/lib32 926# then 927# 1) make config 928# 2) edit auto/config.mk, add -n32 to LDFLAGS 929# 3) make 930# 931#Alternatively: use -o32 instead of -n32. 932### 933 934### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 935### which is found by configure, doesn't work correctly. Symptom is the 936### error message "Termcap entry too long". Uncomment the next line. 937### On AIX 4.2.1 (and other versions probably), libtermcap is reported 938### not to display properly. 939### after changing this, you need to do "make reconfig". 940#CONF_TERM_LIB = --with-tlib=curses 941 942### (E) If you want to use termlib library instead of the automatically found 943### one. After changing this, you need to do "make reconfig". 944#CONF_TERM_LIB = --with-tlib=termlib 945 946### (a) ESIX V4.2 (Reinhard Wobst) 947#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 948 949### (c) Tandem/NSK (Matthew Woehlke) 950#EXTRA_LIBS = -lfloss 951 952### If you want to use ncurses library instead of the automatically found one 953### after changing this, you need to do "make reconfig". 954#CONF_TERM_LIB = --with-tlib=ncurses 955 956### For GCC on MS-Windows, the ".exe" suffix will be added. 957#EXEEXT = .exe 958#LNKEXT = .exe 959 960### (O) For LynxOS 2.5.0, tested on PC. 961#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 962### For LynxOS 3.0.1, tested on PPC 963#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 964### For LynxOS 3.1.0, tested on PC 965#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 966 967 968### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 969### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 970#CFLAGS = -O -Qtarget=m88110compat 971#EXTRA_LIBS = -lgen 972 973# The value of QUOTESED comes from auto/config.mk. 974# Uncomment the next line to use the default value. 975# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 976 977##################### end of system specific lines ################### }}} 978 979### Names of the programs and targets {{{1 980VIMTARGET = $(VIMNAME)$(EXEEXT) 981EXTARGET = $(EXNAME)$(LNKEXT) 982VIEWTARGET = $(VIEWNAME)$(LNKEXT) 983GVIMNAME = g$(VIMNAME) 984GVIMTARGET = $(GVIMNAME)$(LNKEXT) 985GVIEWNAME = g$(VIEWNAME) 986GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 987RVIMNAME = r$(VIMNAME) 988RVIMTARGET = $(RVIMNAME)$(LNKEXT) 989RVIEWNAME = r$(VIEWNAME) 990RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 991RGVIMNAME = r$(GVIMNAME) 992RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 993RGVIEWNAME = r$(GVIEWNAME) 994RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 995VIMDIFFNAME = $(VIMNAME)diff 996GVIMDIFFNAME = g$(VIMDIFFNAME) 997VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 998GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 999EVIMNAME = e$(VIMNAME) 1000EVIMTARGET = $(EVIMNAME)$(LNKEXT) 1001EVIEWNAME = e$(VIEWNAME) 1002EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 1003 1004### Names of the tools that are also made {{{1 1005TOOLS = xxd/xxd$(EXEEXT) 1006 1007### Installation directories. The defaults come from configure. {{{1 1008# 1009### prefix the top directory for the data (default "/usr/local") 1010# 1011# Uncomment the next line to install Vim in your home directory. 1012#prefix = $(HOME) 1013 1014### exec_prefix is the top directory for the executable (default $(prefix)) 1015# 1016# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 1017#exec_prefix = /usr/machine 1018 1019### BINDIR dir for the executable (default "$(exec_prefix)/bin") 1020### MANDIR dir for the manual pages (default "$(prefix)/man") 1021### DATADIR dir for the other files (default "$(prefix)/lib" or 1022# "$(prefix)/share") 1023# They may be different when using different architectures for the 1024# executable and a common directory for the other files. 1025# 1026# Uncomment the next line to install Vim in "/usr/bin" 1027#BINDIR = /usr/bin 1028# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1029#MANDIR = /usr/share/man 1030# Uncomment the next line to install Vim help files in "/usr/share/vim" 1031#DATADIR = /usr/share 1032 1033### DESTDIR root of the installation tree. This is prepended to the other 1034# directories. This directory must exist. 1035#DESTDIR = ~/pkg/vim 1036 1037### Directory of the man pages 1038MAN1DIR = /man1 1039 1040### Vim version (adjusted by a script) 1041VIMMAJOR = 8 1042VIMMINOR = 1 1043 1044### Location of Vim files (should not need to be changed, and {{{1 1045### some things might not work when they are changed!) 1046VIMDIR = /vim 1047VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1048HELPSUBDIR = /doc 1049COLSUBDIR = /colors 1050SYNSUBDIR = /syntax 1051INDSUBDIR = /indent 1052AUTOSUBDIR = /autoload 1053PLUGSUBDIR = /plugin 1054FTPLUGSUBDIR = /ftplugin 1055LANGSUBDIR = /lang 1056COMPSUBDIR = /compiler 1057KMAPSUBDIR = /keymap 1058MACROSUBDIR = /macros 1059PACKSUBDIR = /pack 1060TOOLSSUBDIR = /tools 1061TUTORSUBDIR = /tutor 1062SPELLSUBDIR = /spell 1063PRINTSUBDIR = /print 1064PODIR = po 1065 1066### VIMLOC common root of the Vim files (all versions) 1067### VIMRTLOC common root of the runtime Vim files (this version) 1068### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1069### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1070### HELPSUBLOC location for help files 1071### COLSUBLOC location for colorscheme files 1072### SYNSUBLOC location for syntax files 1073### INDSUBLOC location for indent files 1074### AUTOSUBLOC location for standard autoload files 1075### PLUGSUBLOC location for standard plugin files 1076### FTPLUGSUBLOC location for ftplugin files 1077### LANGSUBLOC location for language files 1078### COMPSUBLOC location for compiler files 1079### KMAPSUBLOC location for keymap files 1080### MACROSUBLOC location for macro files 1081### PACKSUBLOC location for packages 1082### TOOLSSUBLOC location for tools files 1083### TUTORSUBLOC location for tutor files 1084### SPELLSUBLOC location for spell files 1085### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1086### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1087### You can override these if you want to install them somewhere else. 1088### Edit feature.h for compile-time settings. 1089VIMLOC = $(DATADIR)$(VIMDIR) 1090VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1091VIMRCLOC = $(VIMLOC) 1092HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1093COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1094SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1095INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1096AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1097PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1098FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1099LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1100COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1101KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1102MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1103PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1104TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1105TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1106SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1107PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1108SCRIPTLOC = $(VIMRTLOC) 1109 1110### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1111### the runtime directory is not below it. 1112#VIMRUNTIMEDIR = $(VIMRTLOC) 1113 1114### Name of the defaults/evim/mswin file target. 1115VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1116EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1117MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1118 1119### Name of the menu file target. 1120SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1121SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1122SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1123 1124### Name of the bugreport file target. 1125SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1126 1127### Name of the rgb.txt file target. 1128SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1129 1130### Name of the file type detection file target. 1131SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1132 1133### Name of the file type detection file target. 1134SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1135 1136### Name of the file type detection script file target. 1137SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1138 1139### Name of the ftplugin-on file target. 1140SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1141 1142### Name of the ftplugin-off file target. 1143SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1144 1145### Name of the indent-on file target. 1146SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1147 1148### Name of the indent-off file target. 1149SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1150 1151### Name of the option window script file target. 1152SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1153 1154# Program to install the program in the target directory. Could also be "mv". 1155INSTALL_PROG = cp 1156 1157# Program to install the data in the target directory. Cannot be "mv"! 1158INSTALL_DATA = cp 1159INSTALL_DATA_R = cp -r 1160 1161### Program to run on installed binary. Use the second one to disable strip. 1162#STRIP = strip 1163#STRIP = /bin/true 1164 1165### Permissions for binaries {{{1 1166BINMOD = 755 1167 1168### Permissions for man page 1169MANMOD = 644 1170 1171### Permissions for help files 1172HELPMOD = 644 1173 1174### Permissions for Perl and shell scripts 1175SCRIPTMOD = 755 1176 1177### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1178VIMSCRIPTMOD = 644 1179 1180### Permissions for all directories that are created 1181DIRMOD = 755 1182 1183### Permissions for all other files that are created 1184FILEMOD = 644 1185 1186# Where to copy the man and help files from 1187HELPSOURCE = ../runtime/doc 1188 1189# Where to copy the script files from (menu, bugreport) 1190SCRIPTSOURCE = ../runtime 1191 1192# Where to copy the colorscheme files from 1193COLSOURCE = ../runtime/colors 1194 1195# Where to copy the syntax files from 1196SYNSOURCE = ../runtime/syntax 1197 1198# Where to copy the indent files from 1199INDSOURCE = ../runtime/indent 1200 1201# Where to copy the standard plugin files from 1202AUTOSOURCE = ../runtime/autoload 1203 1204# Where to copy the standard plugin files from 1205PLUGSOURCE = ../runtime/plugin 1206 1207# Where to copy the ftplugin files from 1208FTPLUGSOURCE = ../runtime/ftplugin 1209 1210# Where to copy the macro files from 1211MACROSOURCE = ../runtime/macros 1212 1213# Where to copy the package files from 1214PACKSOURCE = ../runtime/pack 1215 1216# Where to copy the tools files from 1217TOOLSSOURCE = ../runtime/tools 1218 1219# Where to copy the tutor files from 1220TUTORSOURCE = ../runtime/tutor 1221 1222# Where to copy the spell files from 1223SPELLSOURCE = ../runtime/spell 1224 1225# Where to look for language specific files 1226LANGSOURCE = ../runtime/lang 1227 1228# Where to look for compiler files 1229COMPSOURCE = ../runtime/compiler 1230 1231# Where to look for keymap files 1232KMAPSOURCE = ../runtime/keymap 1233 1234# Where to look for print resource files 1235PRINTSOURCE = ../runtime/print 1236 1237# If you are using Linux, you might want to use this to make vim the 1238# default vi editor, it will create a link from vi to Vim when doing 1239# "make install". An existing file will be overwritten! 1240# When not using it, some make programs can't handle an undefined $(LINKIT). 1241#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1242LINKIT = @echo >/dev/null 1243 1244### 1245### GRAPHICAL USER INTERFACE (GUI). {{{1 1246### 'configure --enable-gui' can enable one of these for you if you did set 1247### a corresponding CONF_OPT_GUI above and have X11. 1248### Override configures choice by uncommenting all the following lines. 1249### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1250### for enabling the Athena or Motif GUI. 1251#GUI_SRC = $(NONE_SRC) 1252#GUI_OBJ = $(NONE_OBJ) 1253#GUI_DEFS = $(NONE_DEFS) 1254#GUI_IPATH = $(NONE_IPATH) 1255#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1256#GUI_LIBS1 = $(NONE_LIBS1) 1257#GUI_LIBS2 = $(NONE_LIBS2) 1258#GUI_INSTALL = $(NONE_INSTALL) 1259#GUI_TARGETS = $(NONE_TARGETS) 1260#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1261#GUI_TESTTARGET = $(NONE_TESTTARGET) 1262#GUI_BUNDLE = $(NONE_BUNDLE) 1263 1264# Without a GUI install the normal way. 1265NONE_INSTALL = install_normal 1266 1267### GTK GUI 1268GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c gui_gtk_f.c \ 1269 gui_beval.c $(GRESOURCE_SRC) 1270GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1271 objects/gui_gtk_f.o \ 1272 objects/gui_beval.o $(GRESOURCE_OBJ) 1273GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1274GTK_IPATH = $(GUI_INC_LOC) 1275GTK_LIBS_DIR = $(GUI_LIB_LOC) 1276GTK_LIBS1 = 1277GTK_LIBS2 = $(GTK_LIBNAME) 1278GTK_INSTALL = install_normal install_gui_extra 1279GTK_TARGETS = installglinks 1280GTK_MAN_TARGETS = yes 1281GTK_TESTTARGET = gui 1282GTK_BUNDLE = 1283 1284### Motif GUI 1285MOTIF_SRC = gui.c gui_motif.c gui_x11.c gui_beval.c \ 1286 gui_xmdlg.c gui_xmebw.c 1287MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1288 objects/gui_beval.o \ 1289 objects/gui_xmdlg.o objects/gui_xmebw.o 1290MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1291MOTIF_IPATH = $(GUI_INC_LOC) 1292MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1293MOTIF_LIBS1 = 1294MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1295MOTIF_INSTALL = install_normal install_gui_extra 1296MOTIF_TARGETS = installglinks 1297MOTIF_MAN_TARGETS = yes 1298MOTIF_TESTTARGET = gui 1299MOTIF_BUNDLE = 1300 1301### Athena GUI 1302### Use Xaw3d to make the menus look a little bit nicer 1303#XAW_LIB = -lXaw3d 1304XAW_LIB = -lXaw 1305 1306### When using Xaw3d, uncomment/comment the following lines to also get the 1307### scrollbars from Xaw3d. 1308#ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1309#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1310# objects/gui_beval.o objects/gui_at_fs.o 1311#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1312# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1313# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1314ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c \ 1315 gui_at_sb.c gui_at_fs.c 1316ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1317 objects/gui_beval.o \ 1318 objects/gui_at_sb.o objects/gui_at_fs.o 1319ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1320 1321ATHENA_IPATH = $(GUI_INC_LOC) 1322ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1323ATHENA_LIBS1 = $(XAW_LIB) 1324ATHENA_LIBS2 = -lXt 1325ATHENA_INSTALL = install_normal install_gui_extra 1326ATHENA_TARGETS = installglinks 1327ATHENA_MAN_TARGETS = yes 1328ATHENA_TESTTARGET = gui 1329ATHENA_BUNDLE = 1330 1331### neXtaw GUI 1332NEXTAW_LIB = -lneXtaw 1333 1334NEXTAW_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1335NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1336 objects/gui_beval.o objects/gui_at_fs.o 1337NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1338 1339NEXTAW_IPATH = $(GUI_INC_LOC) 1340NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1341NEXTAW_LIBS1 = $(NEXTAW_LIB) 1342NEXTAW_LIBS2 = -lXt 1343NEXTAW_INSTALL = install_normal install_gui_extra 1344NEXTAW_TARGETS = installglinks 1345NEXTAW_MAN_TARGETS = yes 1346NEXTAW_TESTTARGET = gui 1347NEXTAW_BUNDLE = 1348 1349### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1350# errors: ld: Undefined symbol 1351# _get_wmShellWidgetClass 1352# _get_applicationShellWidgetClass 1353# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1354# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1355#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1356# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1357# too: 1358#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1359 1360# PHOTON GUI 1361PHOTONGUI_SRC = gui.c gui_photon.c 1362PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o 1363PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1364PHOTONGUI_IPATH = 1365PHOTONGUI_LIBS_DIR = 1366PHOTONGUI_LIBS1 = -lph -lphexlib 1367PHOTONGUI_LIBS2 = 1368PHOTONGUI_INSTALL = install_normal install_gui_extra 1369PHOTONGUI_TARGETS = installglinks 1370PHOTONGUI_MAN_TARGETS = yes 1371PHOTONGUI_TESTTARGET = gui 1372PHOTONGUI_BUNDLE = 1373 1374# CARBON GUI 1375CARBONGUI_SRC = gui.c gui_mac.c 1376CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o 1377CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1378 -Wall -Wno-unknown-pragmas \ 1379 -mdynamic-no-pic -pipe 1380CARBONGUI_IPATH = -I. -Iproto 1381CARBONGUI_LIBS_DIR = 1382CARBONGUI_LIBS1 = -framework Carbon 1383CARBONGUI_LIBS2 = 1384CARBONGUI_INSTALL = install_macosx 1385CARBONGUI_TARGETS = 1386CARBONGUI_MAN_TARGETS = 1387CARBONGUI_TESTTARGET = gui 1388CARBONGUI_BUNDLE = gui_bundle 1389APPDIR = $(VIMNAME).app 1390CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1391 1392# All GUI files 1393ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c 1394ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1395 1396# }}} 1397 1398TERM_DEPS = \ 1399 libvterm/include/vterm.h \ 1400 libvterm/include/vterm_keycodes.h \ 1401 libvterm/src/rect.h \ 1402 libvterm/src/utf8.h \ 1403 libvterm/src/vterm_internal.h 1404 1405TERM_SRC = libvterm/src/*.c 1406 1407XDIFF_SRC = \ 1408 xdiff/xdiffi.c \ 1409 xdiff/xemit.c \ 1410 xdiff/xprepare.c \ 1411 xdiff/xutils.c \ 1412 xdiff/xhistogram.c \ 1413 xdiff/xpatience.c \ 1414 1415XDIFF_OBJS = \ 1416 objects/xdiffi.o \ 1417 objects/xemit.o \ 1418 objects/xprepare.o \ 1419 objects/xutils.o \ 1420 objects/xhistogram.o \ 1421 objects/xpatience.o \ 1422 1423XDIFF_INCL = \ 1424 xdiff/xdiff.h \ 1425 xdiff/xdiffi.h \ 1426 xdiff/xemit.h \ 1427 xdiff/xinclude.h \ 1428 xdiff/xmacros.h \ 1429 xdiff/xprepare.h \ 1430 xdiff/xtypes.h \ 1431 xdiff/xutils.h \ 1432 1433### Command to create dependencies based on #include "..." 1434### prototype headers are ignored due to -DPROTO, system 1435### headers #include <...> are ignored if we use the -MM option, as 1436### e.g. provided by gcc-cpp. 1437### Include FEAT_GUI to get dependency on gui.h 1438### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1439CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1440 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1441 1442# flags for cproto 1443# This is for cproto 3 patchlevel 8 or below 1444# __inline, __attribute__ and __extension__ are not recognized by cproto 1445# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1446#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1447# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1448# -D__extension__= -D__restrict="" \ 1449# -D__gnuc_va_list=char -D__builtin_va_list=char 1450 1451# 1452# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1453# __inline and __attribute__ are now recognized by cproto 1454# -D"foo()=" is not supported by all compilers so do not use it 1455NO_ATTR= 1456# 1457# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1458# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1459# 1460# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1461PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1462 1463 1464################################################ 1465## no changes required below this line ## 1466################################################ 1467 1468SHELL = /bin/sh 1469 1470# We would normally use "mkdir -p" but it doesn't work properly everywhere. 1471# Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" 1472# directory. Always use the install-sh script, it's slower but reliable. 1473MKDIR_P = $(SHELL) install-sh -c -d 1474 1475.SUFFIXES: 1476.SUFFIXES: .c .o .pro 1477 1478VTERM_CFLAGS = -Ilibvterm/include 1479 1480PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1481POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1482 1483ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CLFAGS) $(POST_DEFS) 1484 1485# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1486# with "-E". 1487OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1488 1489LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \ 1490 $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \ 1491 $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \ 1492 -Dinline= -D__extension__= -Dalloca=alloca 1493 1494LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1495 1496DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1497 1498# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1499# needed by racket. 1500ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1501ALL_LIBS = \ 1502 $(GUI_LIBS1) \ 1503 $(GUI_X_LIBS) \ 1504 $(GUI_LIBS2) \ 1505 $(X_PRE_LIBS) \ 1506 $(X_LIBS) \ 1507 $(X_EXTRA_LIBS) \ 1508 $(MZSCHEME_LIBS) \ 1509 $(LIBS) \ 1510 $(EXTRA_LIBS) \ 1511 $(LUA_LIBS) \ 1512 $(PERL_LIBS) \ 1513 $(PYTHON_LIBS) \ 1514 $(PYTHON3_LIBS) \ 1515 $(TCL_LIBS) \ 1516 $(RUBY_LIBS) \ 1517 $(PROFILE_LIBS) \ 1518 $(SANITIZER_LIBS) \ 1519 $(LEAK_LIBS) 1520 1521# abbreviations 1522DEST_BIN = $(DESTDIR)$(BINDIR) 1523DEST_VIM = $(DESTDIR)$(VIMLOC) 1524DEST_RT = $(DESTDIR)$(VIMRTLOC) 1525DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1526DEST_COL = $(DESTDIR)$(COLSUBLOC) 1527DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1528DEST_IND = $(DESTDIR)$(INDSUBLOC) 1529DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1530DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1531DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1532DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1533DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1534DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1535DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1536DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1537DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1538DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1539DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1540DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1541DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1542DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1543 1544# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1545# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1546# directory first. 1547# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1548DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1549DEST_MAN_DA = $(DEST_MAN_TOP)/da$(MAN1DIR) 1550DEST_MAN_DA_I = $(DEST_MAN_TOP)/da.ISO8859-1$(MAN1DIR) 1551DEST_MAN_DA_U = $(DEST_MAN_TOP)/da.UTF-8$(MAN1DIR) 1552DEST_MAN_DE = $(DEST_MAN_TOP)/de$(MAN1DIR) 1553DEST_MAN_DE_I = $(DEST_MAN_TOP)/de.ISO8859-1$(MAN1DIR) 1554DEST_MAN_DE_U = $(DEST_MAN_TOP)/de.UTF-8$(MAN1DIR) 1555DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1556DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1557DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1558DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1559DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1560DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1561DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1562DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1563DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1564DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1565DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1566DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1567 1568# The list of tests is common to all systems. 1569include Make_all.mak 1570 1571# BASIC_SRC: files that are always used 1572# GUI_SRC: extra GUI files for current configuration 1573# ALL_GUI_SRC: all GUI files for Unix 1574# 1575# SRC: files used for current configuration 1576# TAGS_SRC: source files used for make tags 1577# TAGS_INCL: include files used for make tags 1578# ALL_SRC: source files used for make depend and make lint 1579 1580BASIC_SRC = \ 1581 arabic.c \ 1582 beval.c \ 1583 blowfish.c \ 1584 buffer.c \ 1585 charset.c \ 1586 crypt.c \ 1587 crypt_zip.c \ 1588 dict.c \ 1589 diff.c \ 1590 digraph.c \ 1591 edit.c \ 1592 eval.c \ 1593 evalfunc.c \ 1594 ex_cmds.c \ 1595 ex_cmds2.c \ 1596 ex_docmd.c \ 1597 ex_eval.c \ 1598 ex_getln.c \ 1599 farsi.c \ 1600 fileio.c \ 1601 fold.c \ 1602 getchar.c \ 1603 hardcopy.c \ 1604 hashtab.c \ 1605 if_cscope.c \ 1606 if_xcmdsrv.c \ 1607 json.c \ 1608 list.c \ 1609 main.c \ 1610 mark.c \ 1611 memfile.c \ 1612 memline.c \ 1613 menu.c \ 1614 message.c \ 1615 misc1.c \ 1616 misc2.c \ 1617 move.c \ 1618 mbyte.c \ 1619 normal.c \ 1620 ops.c \ 1621 option.c \ 1622 os_unix.c \ 1623 auto/pathdef.c \ 1624 popupmnu.c \ 1625 pty.c \ 1626 quickfix.c \ 1627 regexp.c \ 1628 screen.c \ 1629 search.c \ 1630 sha256.c \ 1631 spell.c \ 1632 spellfile.c \ 1633 syntax.c \ 1634 tag.c \ 1635 term.c \ 1636 terminal.c \ 1637 textprop.c \ 1638 ui.c \ 1639 undo.c \ 1640 userfunc.c \ 1641 version.c \ 1642 window.c \ 1643 $(OS_EXTRA_SRC) 1644 1645SRC = $(BASIC_SRC) \ 1646 $(GUI_SRC) \ 1647 $(TERM_SRC) \ 1648 $(XDIFF_SRC) \ 1649 $(HANGULIN_SRC) \ 1650 $(LUA_SRC) \ 1651 $(MZSCHEME_SRC) \ 1652 $(PERL_SRC) \ 1653 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1654 $(TCL_SRC) \ 1655 $(RUBY_SRC) \ 1656 $(WORKSHOP_SRC) \ 1657 $(WSDEBUG_SRC) 1658 1659TAGS_SRC = *.c *.cpp $(PERL_SRC) $(TERM_SRC) $(XDIFF_SRC) 1660TAGS_INCL = *.h $(TERM_DEPS) $(XDIFF_INCL) 1661 1662EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1663 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1664 gui_beval.c workshop.c wsdebug.c integration.c \ 1665 netbeans.c channel.c \ 1666 $(GRESOURCE_SRC) 1667 1668# Unittest files 1669JSON_TEST_SRC = json_test.c 1670JSON_TEST_TARGET = json_test$(EXEEXT) 1671KWORD_TEST_SRC = kword_test.c 1672KWORD_TEST_TARGET = kword_test$(EXEEXT) 1673MEMFILE_TEST_SRC = memfile_test.c 1674MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1675MESSAGE_TEST_SRC = message_test.c 1676MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1677 1678UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1679UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1680RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1681 1682# All sources, also the ones that are not configured 1683ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) \ 1684 $(EXTRA_SRC) $(TERM_SRC) $(XDIFF_SRC) 1685 1686# Which files to check with lint. Select one of these three lines. ALL_SRC 1687# checks more, but may not work well for checking a GUI that wasn't configured. 1688# The perl sources also don't work well with lint. 1689LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1690 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1691 $(WORKSHOP_SRC) $(WSDEBUG_SRC) \ 1692 $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) 1693#LINT_SRC = $(SRC) 1694#LINT_SRC = $(ALL_SRC) 1695#LINT_SRC = $(BASIC_SRC) 1696 1697OBJ_COMMON = \ 1698 objects/arabic.o \ 1699 objects/beval.o \ 1700 objects/buffer.o \ 1701 objects/blowfish.o \ 1702 objects/crypt.o \ 1703 objects/crypt_zip.o \ 1704 objects/dict.o \ 1705 objects/diff.o \ 1706 objects/digraph.o \ 1707 objects/edit.o \ 1708 objects/eval.o \ 1709 objects/evalfunc.o \ 1710 objects/ex_cmds.o \ 1711 objects/ex_cmds2.o \ 1712 objects/ex_docmd.o \ 1713 objects/ex_eval.o \ 1714 objects/ex_getln.o \ 1715 objects/farsi.o \ 1716 objects/fileio.o \ 1717 objects/fold.o \ 1718 objects/getchar.o \ 1719 objects/hardcopy.o \ 1720 objects/hashtab.o \ 1721 $(HANGULIN_OBJ) \ 1722 objects/if_cscope.o \ 1723 objects/if_xcmdsrv.o \ 1724 objects/list.o \ 1725 objects/mark.o \ 1726 objects/memline.o \ 1727 objects/menu.o \ 1728 objects/misc1.o \ 1729 objects/misc2.o \ 1730 objects/move.o \ 1731 objects/mbyte.o \ 1732 objects/normal.o \ 1733 objects/ops.o \ 1734 objects/option.o \ 1735 objects/os_unix.o \ 1736 objects/pathdef.o \ 1737 objects/popupmnu.o \ 1738 objects/pty.o \ 1739 objects/quickfix.o \ 1740 objects/regexp.o \ 1741 objects/screen.o \ 1742 objects/search.o \ 1743 objects/sha256.o \ 1744 objects/spell.o \ 1745 objects/spellfile.o \ 1746 objects/syntax.o \ 1747 objects/tag.o \ 1748 objects/term.o \ 1749 objects/terminal.o \ 1750 objects/textprop.o \ 1751 objects/ui.o \ 1752 objects/undo.o \ 1753 objects/userfunc.o \ 1754 objects/version.o \ 1755 objects/window.o \ 1756 $(GUI_OBJ) \ 1757 $(TERM_OBJ) \ 1758 $(LUA_OBJ) \ 1759 $(MZSCHEME_OBJ) \ 1760 $(PERL_OBJ) \ 1761 $(PYTHON_OBJ) \ 1762 $(PYTHON3_OBJ) \ 1763 $(TCL_OBJ) \ 1764 $(RUBY_OBJ) \ 1765 $(OS_EXTRA_OBJ) \ 1766 $(WORKSHOP_OBJ) \ 1767 $(NETBEANS_OBJ) \ 1768 $(CHANNEL_OBJ) \ 1769 $(XDIFF_OBJS) \ 1770 $(WSDEBUG_OBJ) 1771 1772# The files included by tests are not in OBJ_COMMON. 1773OBJ_MAIN = \ 1774 objects/charset.o \ 1775 objects/json.o \ 1776 objects/main.o \ 1777 objects/memfile.o \ 1778 objects/message.o 1779 1780OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1781 1782OBJ_JSON_TEST = \ 1783 objects/charset.o \ 1784 objects/memfile.o \ 1785 objects/message.o \ 1786 objects/json_test.o 1787 1788JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1789 1790OBJ_KWORD_TEST = \ 1791 objects/json.o \ 1792 objects/memfile.o \ 1793 objects/message.o \ 1794 objects/kword_test.o 1795 1796KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1797 1798OBJ_MEMFILE_TEST = \ 1799 objects/charset.o \ 1800 objects/json.o \ 1801 objects/message.o \ 1802 objects/memfile_test.o 1803 1804MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1805 1806OBJ_MESSAGE_TEST = \ 1807 objects/charset.o \ 1808 objects/json.o \ 1809 objects/memfile.o \ 1810 objects/message_test.o 1811 1812MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1813 1814ALL_OBJ = $(OBJ_COMMON) \ 1815 $(OBJ_MAIN) \ 1816 $(OBJ_JSON_TEST) \ 1817 $(OBJ_KWORD_TEST) \ 1818 $(OBJ_MEMFILE_TEST) \ 1819 $(OBJ_MESSAGE_TEST) 1820 1821 1822PRO_AUTO = \ 1823 arabic.pro \ 1824 blowfish.pro \ 1825 buffer.pro \ 1826 charset.pro \ 1827 crypt.pro \ 1828 crypt_zip.pro \ 1829 dict.pro \ 1830 diff.pro \ 1831 digraph.pro \ 1832 edit.pro \ 1833 eval.pro \ 1834 evalfunc.pro \ 1835 ex_cmds.pro \ 1836 ex_cmds2.pro \ 1837 ex_docmd.pro \ 1838 ex_eval.pro \ 1839 ex_getln.pro \ 1840 farsi.pro \ 1841 fileio.pro \ 1842 fold.pro \ 1843 getchar.pro \ 1844 hardcopy.pro \ 1845 hashtab.pro \ 1846 hangulin.pro \ 1847 if_cscope.pro \ 1848 if_lua.pro \ 1849 if_mzsch.pro \ 1850 if_python.pro \ 1851 if_python3.pro \ 1852 if_ruby.pro \ 1853 if_xcmdsrv.pro \ 1854 json.pro \ 1855 list.pro \ 1856 main.pro \ 1857 mark.pro \ 1858 mbyte.pro \ 1859 memfile.pro \ 1860 memline.pro \ 1861 menu.pro \ 1862 message.pro \ 1863 misc1.pro \ 1864 misc2.pro \ 1865 move.pro \ 1866 normal.pro \ 1867 ops.pro \ 1868 option.pro \ 1869 os_mac_conv.pro \ 1870 os_unix.pro \ 1871 popupmnu.pro \ 1872 pty.pro \ 1873 quickfix.pro \ 1874 regexp.pro \ 1875 screen.pro \ 1876 search.pro \ 1877 sha256.pro \ 1878 spell.pro \ 1879 spellfile.pro \ 1880 syntax.pro \ 1881 tag.pro \ 1882 term.pro \ 1883 terminal.pro \ 1884 termlib.pro \ 1885 textprop.pro \ 1886 ui.pro \ 1887 undo.pro \ 1888 userfunc.pro \ 1889 version.pro \ 1890 window.pro \ 1891 beval.pro \ 1892 gui_beval.pro \ 1893 workshop.pro \ 1894 netbeans.pro \ 1895 channel.pro \ 1896 $(ALL_GUI_PRO) \ 1897 $(TCL_PRO) 1898 1899# Resources used for the Mac are in one directory. 1900RSRC_DIR = os_mac_rsrc 1901 1902PRO_MANUAL = os_amiga.pro os_win32.pro \ 1903 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1904 1905# Default target is making the executable and tools 1906all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1907 1908tools: $(TOOLS) 1909 1910# Run configure with all the setting from above. 1911# 1912# Note: auto/config.h doesn't depend on configure, because running configure 1913# doesn't always update auto/config.h. The timestamp isn't changed if the 1914# file contents didn't change (to avoid recompiling everything). Including a 1915# dependency on auto/config.h would cause running configure each time when 1916# auto/config.h isn't updated. The dependency on auto/config.mk should make 1917# sure configure is run when it's needed. 1918# 1919# Remove the config.cache every time, once in a while it causes problems that 1920# are very hard to figure out. 1921# 1922config auto/config.mk: auto/configure config.mk.in config.h.in 1923 -rm -f auto/config.cache 1924 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1925 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1926 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1927 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1928 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1929 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1930 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1931 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1932 $(CONF_OPT_AUTOSERVE) $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1933 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1934 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1935 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1936 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1937 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1938 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1939 $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ 1940 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1941 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1942 $(CONF_OPT_SYSMOUSE); \ 1943 fi 1944 1945# Use "make reconfig" to rerun configure without cached values. 1946# When config.h changes, most things will be recompiled automatically. 1947# Invoke $(MAKE) to run config with the empty auto/config.mk. 1948# Invoke $(MAKE) to build all with the filled auto/config.mk. 1949reconfig: scratch clean 1950 $(MAKE) -f Makefile config 1951 $(MAKE) -f Makefile all 1952 1953# Run autoconf to produce auto/configure. 1954# Note: 1955# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1956# producing auto/configure. 1957# - autoconf is not run automatically, because a patch usually changes both 1958# configure.ac and auto/configure but can't update the timestamps. People 1959# who do not have (the correct version of) autoconf would run into trouble. 1960# 1961# Two tricks are required to make autoconf put its output in the "auto" dir: 1962# - Temporarily move the ./configure script to ./configure.save. Don't 1963# overwrite it, it's probably the result of an aborted autoconf. 1964# - Use sed to change ./config.log to auto/config.log in the configure script. 1965# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1966# care of: 1967# - configure.lineno: has the line numbers replaced with $LINENO. That 1968# improves patches a LOT, thus use it instead (until someone says it doesn't 1969# work on some system). 1970# - autom4te.cache directory is created and not cleaned up. Delete it. 1971# - Uses ">config.log" instead of "./config.log". 1972autoconf: 1973 if test ! -f configure.save; then mv configure configure.save; fi 1974 $(AUTOCONF) 1975 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1976 chmod 755 auto/configure 1977 mv -f configure.save configure 1978 -rm -rf autom4te.cache 1979 -rm -f auto/config.status auto/config.cache 1980 1981# Run vim script to generate the Ex command lookup table. 1982# This only needs to be run when a command name has been added or changed. 1983# If this fails because you don't have Vim yet, first build and install Vim 1984# without changes. 1985cmdidxs: ex_cmds.h 1986 vim -u NONE -i NONE -X -S create_cmdidxs.vim 1987 1988 1989# The normal command to compile a .c file to its .o file. 1990# Without or with ALL_CFLAGS. 1991CCC_NF = $(CC) -c -I$(srcdir) 1992CCC = $(CCC_NF) $(ALL_CFLAGS) 1993 1994 1995# Link the target for normal use or debugging. 1996# A shell script is used to try linking without unnecessary libraries. 1997$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1998 $(CCC) version.c -o objects/version.o 1999 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2000 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 2001 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2002 sh $(srcdir)/link.sh 2003 2004xxd/xxd$(EXEEXT): xxd/xxd.c 2005 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 2006 $(MAKE) -f Makefile 2007 2008# Build the language specific files if they were unpacked. 2009# Generate the converted .mo files separately, it's no problem if this fails. 2010languages: 2011 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2012 cd $(PODIR); \ 2013 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 2014 fi 2015 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2016 cd $(PODIR); \ 2017 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 2018 fi 2019 2020# Update the *.po files for changes in the sources. Only run manually. 2021update-po: 2022 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 2023 2024# Generate function prototypes. This is not needed to compile vim, but if 2025# you want to use it, cproto is out there on the net somewhere -- Webb 2026# 2027# When generating os_amiga.pro and os_win32.pro there will be a 2028# few include files that can not be found, that's OK. 2029 2030proto: $(PRO_AUTO) $(PRO_MANUAL) 2031 2032# Filter out arguments that cproto doesn't support. 2033# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 2034# them as a list of individual flags. 2035# The -E"gcc -E" argument must be separate to avoid problems with shell 2036# quoting. 2037# Strip -O2, it may cause cproto to write stderr to the file "2". 2038CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 2039 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g' -e 's/ -O[^ ]\+//g'` 2040 2041### Would be nice if this would work for "normal" make. 2042### Currently it only works for (Free)BSD make. 2043#$(PRO_AUTO): $$(*F).c 2044# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 2045 2046# Always define FEAT_GUI. This may generate a few warnings if it's also 2047# defined in auto/config.h, you can ignore that. 2048.c.pro: 2049 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2050 echo "/* vim: set ft=c : */" >> proto/$@ 2051 2052os_amiga.pro: os_amiga.c 2053 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 2054 echo "/* vim: set ft=c : */" >> proto/$@ 2055 2056os_win32.pro: os_win32.c 2057 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2058 echo "/* vim: set ft=c : */" >> proto/$@ 2059 2060os_mswin.pro: os_mswin.c 2061 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2062 echo "/* vim: set ft=c : */" >> proto/$@ 2063 2064winclip.pro: winclip.c 2065 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2066 echo "/* vim: set ft=c : */" >> proto/$@ 2067 2068os_beos.pro: os_beos.c 2069 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 2070 echo "/* vim: set ft=c : */" >> proto/$@ 2071 2072os_vms.pro: os_vms.c 2073# must use os_vms_conf.h for auto/config.h 2074 mv auto/config.h auto/config.h.save 2075 cp os_vms_conf.h auto/config.h 2076 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 2077 echo "/* vim: set ft=c : */" >> proto/$@ 2078 rm auto/config.h 2079 mv auto/config.h.save auto/config.h 2080 2081# if_perl.pro is special: Use the generated if_perl.c for input and remove 2082# prototypes for local functions. 2083if_perl.pro: auto/if_perl.c 2084 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 2085 2086gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2087 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2088 echo "/* vim: set ft=c : */" >> proto/$@ 2089 2090notags: 2091 -rm -f tags 2092 2093# Note: tags is made for the currently configured version, can't include both 2094# Motif and Athena GUI 2095# You can ignore error messages for missing files. 2096tags TAGS: notags 2097 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 2098 2099# Make a highlight file for types. Requires Exuberant ctags and awk 2100types: types.vim 2101types.vim: $(TAGS_SRC) $(TAGS_INCL) 2102 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 2103 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2104 {printf("%s ", $$1)}END{print ""}' > $@ 2105 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2106 2107# TESTING 2108# 2109# Execute the test scripts and the unittests. 2110test check: scripttests unittests test_libvterm 2111 2112# Execute the test scripts. Run these after compiling Vim, before installing. 2113# This doesn't depend on $(VIMTARGET), because that won't work when configure 2114# wasn't run yet. Restart make to build it instead. 2115# 2116# This will produce a lot of garbage on your screen, including a few error 2117# messages. Don't worry about that. 2118# If there is a real error, there will be a difference between "testXX.out" and 2119# a "testXX.ok" file. 2120# If everything is alright, the final message will be "ALL DONE". If not you 2121# get "TEST FAILURE". 2122# 2123scripttests: 2124 $(MAKE) -f Makefile $(VIMTARGET) 2125 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2126 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2127 fi 2128 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2129 ln -s $(VIMTARGET) vim; \ 2130 fi 2131 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2132 2133# Run the tests with the GUI. Assumes vim/gvim was already built 2134testgui: 2135 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2136 2137benchmark: 2138 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2139 2140unittesttargets: 2141 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2142 2143# Swap these lines to run individual tests with gvim instead of vim. 2144VIMTESTTARGET = $(VIMTARGET) 2145# VIMTESTTARGET = $(GVIMTARGET) 2146 2147# Execute the unittests one by one. 2148unittest unittests: $(RUN_UNITTESTS) 2149 2150run_json_test: $(JSON_TEST_TARGET) 2151 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2152 2153run_kword_test: $(KWORD_TEST_TARGET) 2154 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2155 2156run_memfile_test: $(MEMFILE_TEST_TARGET) 2157 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2158 2159run_message_test: $(MESSAGE_TEST_TARGET) 2160 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2161 2162# Run the libvterm tests. 2163# This currently doesn't work on Mac, only run on Linux for now. 2164test_libvterm: 2165 @if test `uname` = "Linux"; then \ 2166 cd libvterm; $(MAKE) -f Makefile test \ 2167 CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"; \ 2168 fi 2169 2170# Run individual OLD style test. 2171# These do not depend on the executable, compile it when needed. 2172test1 \ 2173 test_eval \ 2174 test3 test11 test14 test17 \ 2175 test29 test30 test37 test39 \ 2176 test42 test44 test48 test49 \ 2177 test52 test59 \ 2178 test64 test69 \ 2179 test70 test72 \ 2180 test86 test87 test88 \ 2181 test94 test95 test99 test108: 2182 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2183 2184# Run individual NEW style test. 2185# These do not depend on the executable, compile it when needed. 2186$(NEW_TESTS): 2187 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile $@.res VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2188 @if test -f testdir/test.log; then \ 2189 cat testdir/test.log; \ 2190 fi 2191 cat testdir/messages 2192 2193newtests: 2194 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2195 @if test -f testdir/test.log; then \ 2196 cat testdir/test.log; \ 2197 fi 2198 cat testdir/messages 2199 2200testclean: 2201 cd testdir; $(MAKE) -f Makefile clean 2202 if test -d $(PODIR); then \ 2203 cd $(PODIR); $(MAKE) checkclean; \ 2204 fi 2205 2206# Unittests 2207# It's build just like Vim to satisfy all dependencies. 2208$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2209 $(CCC) version.c -o objects/version.o 2210 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2211 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2212 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2213 sh $(srcdir)/link.sh 2214 2215$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2216 $(CCC) version.c -o objects/version.o 2217 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2218 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2219 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2220 sh $(srcdir)/link.sh 2221 2222$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2223 $(CCC) version.c -o objects/version.o 2224 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2225 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2226 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2227 sh $(srcdir)/link.sh 2228 2229$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2230 $(CCC) version.c -o objects/version.o 2231 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2232 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2233 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2234 sh $(srcdir)/link.sh 2235 2236# install targets 2237 2238install: $(GUI_INSTALL) 2239 2240install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2241 2242install_gui_extra: installgtutorbin 2243 2244installvim: installvimbin installtutorbin \ 2245 installruntime installlinks installmanlinks 2246 2247# 2248# Avoid overwriting an existing executable, somebody might be running it and 2249# overwriting it could cause it to crash. Deleting it is OK, it won't be 2250# really deleted until all running processes for it have exited. It is 2251# renamed first, in case the deleting doesn't work. 2252# 2253# If you want to keep an older version, rename it before running "make 2254# install". 2255# 2256installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2257 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2258 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2259 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2260 fi 2261 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2262 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2263 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2264# may create a link to the new executable from /usr/bin/vi 2265 -$(LINKIT) 2266 2267# Long list of arguments for the shell script that installs the manual pages 2268# for one language. 2269INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2270 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2271 2272# Install most of the runtime files 2273installruntime: installrtbase installmacros installpack installtutor installspell 2274 2275# install the help files; first adjust the contents for the final location 2276installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2277 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2278 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml \ 2279 $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2280 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2281# Generate the help tags with ":helptags" to handle all languages. 2282# Move the distributed tags file aside and restore it, to avoid it being 2283# different from the repository. 2284 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2285 mv -f tags tags.dist; fi 2286 @echo generating help tags 2287 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2288 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2289 cd $(HELPSOURCE); \ 2290 files=`ls *.txt tags`; \ 2291 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2292 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2293 cd $(DEST_HELP); \ 2294 chmod $(HELPMOD) $$files 2295 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2296 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2297 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2298# install the menu files 2299 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2300 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2301 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2302 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2303 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2304 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2305# install the defaults/evim/mswin file 2306 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2307 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2308 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2309 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2310 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2311 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2312# install the rgb.txt file 2313 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2314 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2315# install the bugreport file 2316 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2317 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2318# install the example vimrc files 2319 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2320 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2321 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2322 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2323# install the file type detection files 2324 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2325 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2326 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2327 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2328 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2329 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2330 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2331 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2332 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2333 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2334 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2335 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2336 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2337 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2338 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2339 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2340# install the print resource files 2341 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2342 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2343# install the colorscheme files 2344 cd $(COLSOURCE); $(INSTALL_DATA_R) *.vim tools README.txt $(DEST_COL) 2345 cd $(DEST_COL); chmod $(DIRMOD) tools 2346 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt tools/*.vim 2347# install the syntax files 2348 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2349 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2350# install the indent files 2351 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2352 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2353# install the standard autoload files 2354 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2355 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2356 cd $(AUTOSOURCE)/dist; $(INSTALL_DATA) *.vim $(DEST_AUTO)/dist 2357 cd $(DEST_AUTO)/dist; chmod $(HELPMOD) *.vim 2358 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2359 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2360# install the standard plugin files 2361 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2362 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2363# install the ftplugin files 2364 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2365 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2366# install the compiler files 2367 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2368 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2369 2370installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2371 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2372 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2373 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2374 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2375# When using CVS some CVS directories might have been copied. 2376# Also delete AAPDIR and *.info files. 2377 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2378 if test -n "$$cvs"; then \ 2379 rm -rf $$cvs; \ 2380 fi 2381 2382installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2383 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2384 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2385 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2386 2387# install the tutor files 2388installtutorbin: $(DEST_VIM) 2389 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2390 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2391 2392installgtutorbin: $(DEST_VIM) 2393 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2394 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2395 2396installtutor: $(DEST_RT) $(DEST_TUTOR) 2397 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2398 -rm -f $(DEST_TUTOR)/*.info 2399 chmod $(HELPMOD) $(DEST_TUTOR)/* 2400 2401# Install the spell files, if they exist. This assumes at least the English 2402# spell file is there. 2403installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2404 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2405 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2406 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2407 fi 2408 2409# install helper program xxd 2410installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2411 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2412 $(INSTALL_TOOL_LANGS) 2413 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2414 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2415 rm -f $(DEST_BIN)/xxd.rm; \ 2416 fi 2417 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2418 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2419 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2420 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2421 2422# install the runtime tools 2423 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2424# When using CVS some CVS directories might have been copied. 2425 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2426 if test -n "$$cvs"; then \ 2427 rm -rf $$cvs; \ 2428 fi 2429 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2430# replace the path in some tools 2431 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2432 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2433 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2434 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2435 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2436 2437# install the language specific files for tools, if they were unpacked 2438install-tool-languages: 2439 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2440 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2441 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2442 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2443 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2444 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2445 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2446 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2447 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2448 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2449 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2450 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2451 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2452 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2453 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2454 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2455 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2456 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2457 2458# install the language specific files, if they were unpacked 2459install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2460 -$(SHELL) ./installman.sh install $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2461 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2462 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2463 -$(SHELL) ./installman.sh install $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2464 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2465 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2466 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2467 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2468 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2469 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2470 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2471 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2472 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2473 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2474 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2475 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2476 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2477 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2478 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2479 $(DEST_MAN_DA) $(INSTALLMLARGS) 2480 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2481 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2482 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2483 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2484 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2485 $(DEST_MAN_DE) $(INSTALLMLARGS) 2486 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2487 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2488 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2489 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2490 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2491 $(DEST_MAN_FR) $(INSTALLMLARGS) 2492 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2493 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2494 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2495 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2496 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2497 $(DEST_MAN_IT) $(INSTALLMLARGS) 2498 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2499 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2500 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2501 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2502 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2503 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2504 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2505 $(DEST_MAN_PL) $(INSTALLMLARGS) 2506 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2507 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2508 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2509 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2510 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2511 $(DEST_MAN_RU) $(INSTALLMLARGS) 2512 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2513 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2514 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2515 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2516 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2517 fi 2518 if test -d $(LANGSOURCE); then \ 2519 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2520 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2521 fi 2522 if test -d $(KMAPSOURCE); then \ 2523 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2524 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2525 fi 2526 2527# Install the icons for KDE, if the directory exists and the icon doesn't. 2528# Always when $(DESTDIR) is not empty. 2529ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2530ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2531ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2532ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2533DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2534KDEPATH = $(HOME)/.kde/share/icons 2535install-icons: 2536 if test -n "$(DESTDIR)"; then \ 2537 $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ 2538 $(ICON16PATH) $(DESKTOPPATH); \ 2539 fi 2540 2541 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2542 -a ! -f $(ICON48PATH)/gvim.png; then \ 2543 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2544 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2545 -a -w $(ICONTHEMEPATH) \ 2546 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2547 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2548 fi \ 2549 fi 2550 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2551 -a ! -f $(ICON32PATH)/gvim.png; then \ 2552 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2553 fi 2554 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2555 -a ! -f $(ICON16PATH)/gvim.png; then \ 2556 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2557 fi 2558 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2559 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2560 $(SCRIPTSOURCE)/gvim.desktop \ 2561 $(DESKTOPPATH); \ 2562 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2563 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2564 fi \ 2565 fi 2566 2567$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2568 @echo Runtime files not found. 2569 @echo You need to unpack the runtime archive before running "make install". 2570 test -f error 2571 2572$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2573 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2574 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2575 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2576 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2577 $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_PLUG): 2578 $(MKDIR_P) $@ 2579 -chmod $(DIRMOD) $@ 2580 2581# create links from various names to vim. This is only done when the links 2582# (or executables with the same name) don't exist yet. 2583installlinks: $(GUI_TARGETS) \ 2584 $(DEST_BIN)/$(EXTARGET) \ 2585 $(DEST_BIN)/$(VIEWTARGET) \ 2586 $(DEST_BIN)/$(RVIMTARGET) \ 2587 $(DEST_BIN)/$(RVIEWTARGET) \ 2588 $(INSTALLVIMDIFF) 2589 2590installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2591 $(DEST_BIN)/$(GVIEWTARGET) \ 2592 $(DEST_BIN)/$(RGVIMTARGET) \ 2593 $(DEST_BIN)/$(RGVIEWTARGET) \ 2594 $(DEST_BIN)/$(EVIMTARGET) \ 2595 $(DEST_BIN)/$(EVIEWTARGET) \ 2596 $(INSTALLGVIMDIFF) 2597 2598installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2599installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2600 2601$(DEST_BIN)/$(EXTARGET): 2602 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2603 2604$(DEST_BIN)/$(VIEWTARGET): 2605 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2606 2607$(DEST_BIN)/$(GVIMTARGET): 2608 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2609 2610$(DEST_BIN)/$(GVIEWTARGET): 2611 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2612 2613$(DEST_BIN)/$(RVIMTARGET): 2614 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2615 2616$(DEST_BIN)/$(RVIEWTARGET): 2617 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2618 2619$(DEST_BIN)/$(RGVIMTARGET): 2620 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2621 2622$(DEST_BIN)/$(RGVIEWTARGET): 2623 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2624 2625$(DEST_BIN)/$(VIMDIFFTARGET): 2626 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2627 2628$(DEST_BIN)/$(GVIMDIFFTARGET): 2629 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2630 2631$(DEST_BIN)/$(EVIMTARGET): 2632 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2633 2634$(DEST_BIN)/$(EVIEWTARGET): 2635 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2636 2637# Create links for the manual pages with various names to vim. This is only 2638# done when the links (or manpages with the same name) don't exist yet. 2639 2640INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2641 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2642 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2643 $(GVIMDIFFNAME) $(EVIEWNAME) 2644 2645installmanlinks: 2646 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2647 $(DEST_MAN) $(INSTALLMLARGS) 2648 2649uninstall: uninstall_runtime 2650 -rm -f $(DEST_BIN)/$(VIMTARGET) 2651 -rm -f $(DEST_BIN)/vimtutor 2652 -rm -f $(DEST_BIN)/gvimtutor 2653 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2654 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2655 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2656 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2657 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2658 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2659 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2660 2661# Note: the "rmdir" will fail if any files were added after "make install" 2662uninstall_runtime: 2663 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2664 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA) "" $(INSTALLMANARGS) 2665 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_I) "" $(INSTALLMANARGS) 2666 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_U) "" $(INSTALLMANARGS) 2667 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE) "" $(INSTALLMANARGS) 2668 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_I) "" $(INSTALLMANARGS) 2669 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_U) "" $(INSTALLMANARGS) 2670 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2671 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2672 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2673 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2674 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2675 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2676 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2677 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2678 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2679 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2680 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2681 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2682 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2683 $(DEST_MAN) $(INSTALLMLARGS) 2684 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2685 $(DEST_MAN_DA) $(INSTALLMLARGS) 2686 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2687 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2688 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2689 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2690 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2691 $(DEST_MAN_DE) $(INSTALLMLARGS) 2692 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2693 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2694 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2695 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2696 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2697 $(DEST_MAN_FR) $(INSTALLMLARGS) 2698 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2699 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2700 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2701 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2702 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2703 $(DEST_MAN_IT) $(INSTALLMLARGS) 2704 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2705 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2706 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2707 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2708 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2709 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2710 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2711 $(DEST_MAN_PL) $(INSTALLMLARGS) 2712 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2713 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2714 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2715 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2716 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2717 $(DEST_MAN_RU) $(INSTALLMLARGS) 2718 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2719 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2720 -rm -f $(DEST_MAN)/xxd.1 2721 -rm -f $(DEST_MAN_DA)/xxd.1 $(DEST_MAN_DA_I)/xxd.1 $(DEST_MAN_DA_U)/xxd.1 2722 -rm -f $(DEST_MAN_DE)/xxd.1 $(DEST_MAN_DE_I)/xxd.1 $(DEST_MAN_DE_U)/xxd.1 2723 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2724 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2725 -rm -f $(DEST_MAN_JA_U)/xxd.1 2726 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2727 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2728 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2729 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2730 -rm -f $(SYS_RGB_FILE) 2731 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2732 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2733 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2734 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2735 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2736 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2737 -rm -f $(SYS_OPTWIN_FILE) 2738 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2739 -rm -rf $(DEST_COL)/tools 2740 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2741 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2742 -rm -rf $(DEST_MACRO) 2743 -rm -rf $(DEST_PACK) 2744 -rm -rf $(DEST_TUTOR) 2745 -rm -rf $(DEST_SPELL) 2746 -rm -rf $(DEST_TOOLS) 2747 -rm -rf $(DEST_LANG) 2748 -rm -rf $(DEST_KMAP) 2749 -rm -rf $(DEST_COMP) 2750 -rm -f $(DEST_PRINT)/*.ps 2751 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2752 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2753 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2754 -rm -f $(DEST_AUTO)/dist/*.vim $(DEST_AUTO)/xml/*.vim 2755 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2756 -rmdir $(DEST_FTP) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_AUTO) 2757 -rmdir $(DEST_PLUG) $(DEST_RT) 2758# This will fail when other Vim versions are installed, no worries. 2759 -rmdir $(DEST_VIM) 2760 2761# Clean up all the files that have been produced, except configure's. 2762# We support common typing mistakes for Juergen! :-) 2763clean celan: testclean 2764 -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2765 -rm -rf objects 2766 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2767 -rm -f conftest* *~ auto/link.sed 2768 -rm -f testdir/opt_test.vim 2769 -rm -f $(UNITTEST_TARGETS) 2770 -rm -f runtime pixmaps 2771 -rm -rf $(APPDIR) 2772 -rm -rf mzscheme_base.c 2773 if test -d $(PODIR); then \ 2774 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2775 fi 2776 2777# Make a shadow directory for compilation on another system or with different 2778# features. 2779SHADOWDIR = shadow 2780 2781shadow: runtime pixmaps 2782 $(MKDIR_P) $(SHADOWDIR) 2783 cd $(SHADOWDIR); ln -s ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../libvterm ../vimtutor ../gvimtutor ../install-sh ../Make_all.mak . 2784 mkdir $(SHADOWDIR)/auto 2785 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2786 $(MKDIR_P) $(SHADOWDIR)/po 2787 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/Makefile . 2788 cd $(SHADOWDIR); rm -f auto/link.sed 2789 cp Makefile configure $(SHADOWDIR) 2790 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2791 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2792 cp config.mk.dist $(SHADOWDIR) 2793 $(MKDIR_P) $(SHADOWDIR)/xxd 2794 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2795 $(MKDIR_P) $(SHADOWDIR)/xdiff 2796 cd $(SHADOWDIR)/xdiff; ln -s ../../xdiff/*.[ch] . 2797 if test -d $(RSRC_DIR); then \ 2798 cd $(SHADOWDIR); \ 2799 ln -s ../infplist.xml .; \ 2800 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2801 fi 2802 $(MKDIR_P) $(SHADOWDIR)/testdir 2803 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2804 ../../testdir/Make_all.mak \ 2805 ../../testdir/README.txt \ 2806 ../../testdir/*.in \ 2807 ../../testdir/*.vim \ 2808 ../../testdir/*.py \ 2809 ../../testdir/python* \ 2810 ../../testdir/pyxfile \ 2811 ../../testdir/sautest \ 2812 ../../testdir/samples \ 2813 ../../testdir/dumps \ 2814 ../../testdir/test83-tags? \ 2815 ../../testdir/*.ok . 2816 2817# Link needed for doing "make install" in a shadow directory. 2818runtime: 2819 -ln -s ../runtime . 2820 2821# Link needed for doing "make" using GTK in a shadow directory. 2822pixmaps: 2823 -ln -s ../pixmaps . 2824 2825# Update the synmenu.vim file with the latest Syntax menu. 2826# This is only needed when runtime/makemenu.vim was changed. 2827menu: ./vim ../runtime/makemenu.vim 2828 ./vim -u ../runtime/makemenu.vim 2829 2830# Start configure from scratch 2831scrub scratch: 2832 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2833 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2834 touch auto/config.h 2835 cp config.mk.dist auto/config.mk 2836 2837distclean: clean scratch 2838 -rm -f tags 2839 2840dist: distclean 2841 @echo 2842 @echo Making the distribution has to be done in the top directory 2843 2844mdepend: 2845 -@rm -f Makefile~ 2846 cp Makefile Makefile~ 2847 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2848 @for i in $(ALL_SRC) ; do \ 2849 echo "$$i" ; \ 2850 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2851 $(CPP) $$i |\ 2852 grep '^# .*"\./.*\.h"' |\ 2853 sort -t'"' -u +1 -2 |\ 2854 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2855 ` >> tmp_make ; \ 2856 done 2857 mv tmp_make Makefile 2858 2859depend: 2860 -@rm -f Makefile~ 2861 cp Makefile Makefile~ 2862 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2863 -for i in $(ALL_SRC); do echo $$i; \ 2864 $(CPP_DEPEND) $$i | \ 2865 sed -e 's+^\([^ ]*\.o\)+objects/\1+' -e 's+xdiff/\.\./++g' >> tmp_make; done 2866 mv tmp_make Makefile 2867 2868# Run lint. Clean up the *.ln files that are sometimes left behind. 2869lint: 2870 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2871 -rm -f *.ln 2872 2873# Check dosinst.c with lint. 2874lintinstall: 2875 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2876 -rm -f dosinst.ln 2877 2878########################################################################### 2879 2880.c.o: 2881 $(CCC) $< 2882 2883auto/if_perl.c: if_perl.xs 2884 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2885 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2886 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2887 2888auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2889 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2890 2891auto/pathdef.c: Makefile auto/config.mk 2892 -@echo creating $@ 2893 -@echo '/* pathdef.c */' > $@ 2894 -@echo '/* This file is automatically created by Makefile' >> $@ 2895 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2896 -@echo '#include "vim.h"' >> $@ 2897 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2898 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2899 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2900 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2901 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2902 -@if test -n "$(COMPILEDBY)"; then \ 2903 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2904 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2905 -@echo '";' >> $@ 2906 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2907 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2908 -@echo '";' >> $@ 2909 -@sh $(srcdir)/pathdef.sh 2910 2911GUI_GTK_RES_INPUTS = \ 2912 ../pixmaps/stock_vim_build_tags.png \ 2913 ../pixmaps/stock_vim_find_help.png \ 2914 ../pixmaps/stock_vim_save_all.png \ 2915 ../pixmaps/stock_vim_session_load.png \ 2916 ../pixmaps/stock_vim_session_new.png \ 2917 ../pixmaps/stock_vim_session_save.png \ 2918 ../pixmaps/stock_vim_shell.png \ 2919 ../pixmaps/stock_vim_window_maximize.png \ 2920 ../pixmaps/stock_vim_window_maximize_width.png \ 2921 ../pixmaps/stock_vim_window_minimize.png \ 2922 ../pixmaps/stock_vim_window_minimize_width.png \ 2923 ../pixmaps/stock_vim_window_split.png \ 2924 ../pixmaps/stock_vim_window_split_vertical.png 2925 2926auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2927 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2928auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2929 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2930 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2931 fi 2932 2933# All the object files are put in the "objects" directory. Since not all make 2934# commands understand putting object files in another directory, it must be 2935# specified for each file separately. 2936 2937objects: objects/.dirstamp 2938 2939objects/.dirstamp: 2940 $(MKDIR_P) objects 2941 touch objects/.dirstamp 2942 2943# All object files depend on the objects directory, so that parallel make 2944# works. Can't depend on the directory itself, its timestamp changes all the 2945# time. 2946$(ALL_OBJ): objects/.dirstamp 2947 2948objects/arabic.o: arabic.c 2949 $(CCC) -o $@ arabic.c 2950 2951objects/blowfish.o: blowfish.c 2952 $(CCC) -o $@ blowfish.c 2953 2954objects/buffer.o: buffer.c 2955 $(CCC) -o $@ buffer.c 2956 2957objects/charset.o: charset.c 2958 $(CCC) -o $@ charset.c 2959 2960objects/crypt.o: crypt.c 2961 $(CCC) -o $@ crypt.c 2962 2963objects/crypt_zip.o: crypt_zip.c 2964 $(CCC) -o $@ crypt_zip.c 2965 2966objects/dict.o: dict.c 2967 $(CCC) -o $@ dict.c 2968 2969objects/diff.o: diff.c $(XDIFF_INCL) 2970 $(CCC) -o $@ diff.c 2971 2972objects/digraph.o: digraph.c 2973 $(CCC) -o $@ digraph.c 2974 2975objects/edit.o: edit.c 2976 $(CCC) -o $@ edit.c 2977 2978objects/eval.o: eval.c 2979 $(CCC) -o $@ eval.c 2980 2981objects/evalfunc.o: evalfunc.c 2982 $(CCC) -o $@ evalfunc.c 2983 2984objects/ex_cmds.o: ex_cmds.c 2985 $(CCC) -o $@ ex_cmds.c 2986 2987objects/ex_cmds2.o: ex_cmds2.c 2988 $(CCC) -o $@ ex_cmds2.c 2989 2990objects/ex_docmd.o: ex_docmd.c 2991 $(CCC) -o $@ ex_docmd.c 2992 2993objects/ex_eval.o: ex_eval.c 2994 $(CCC) -o $@ ex_eval.c 2995 2996objects/ex_getln.o: ex_getln.c 2997 $(CCC) -o $@ ex_getln.c 2998 2999objects/farsi.o: farsi.c 3000 $(CCC) -o $@ farsi.c 3001 3002objects/fileio.o: fileio.c 3003 $(CCC) -o $@ fileio.c 3004 3005objects/fold.o: fold.c 3006 $(CCC) -o $@ fold.c 3007 3008objects/getchar.o: getchar.c 3009 $(CCC) -o $@ getchar.c 3010 3011objects/hardcopy.o: hardcopy.c 3012 $(CCC) -o $@ hardcopy.c 3013 3014objects/hashtab.o: hashtab.c 3015 $(CCC) -o $@ hashtab.c 3016 3017objects/gui.o: gui.c 3018 $(CCC) -o $@ gui.c 3019 3020objects/gui_at_fs.o: gui_at_fs.c 3021 $(CCC) -o $@ gui_at_fs.c 3022 3023objects/gui_at_sb.o: gui_at_sb.c 3024 $(CCC) -o $@ gui_at_sb.c 3025 3026objects/gui_athena.o: gui_athena.c 3027 $(CCC) -o $@ gui_athena.c 3028 3029objects/beval.o: beval.c 3030 $(CCC) -o $@ beval.c 3031 3032objects/gui_beval.o: gui_beval.c 3033 $(CCC) -o $@ gui_beval.c 3034 3035objects/gui_gtk.o: gui_gtk.c 3036 $(CCC) -o $@ gui_gtk.c 3037 3038objects/gui_gtk_f.o: gui_gtk_f.c 3039 $(CCC) -o $@ gui_gtk_f.c 3040 3041objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3042 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3043 3044objects/gui_gtk_x11.o: gui_gtk_x11.c 3045 $(CCC) -o $@ gui_gtk_x11.c 3046 3047objects/gui_motif.o: gui_motif.c 3048 $(CCC) -o $@ gui_motif.c 3049 3050objects/gui_xmdlg.o: gui_xmdlg.c 3051 $(CCC) -o $@ gui_xmdlg.c 3052 3053objects/gui_xmebw.o: gui_xmebw.c 3054 $(CCC) -o $@ gui_xmebw.c 3055 3056objects/gui_x11.o: gui_x11.c 3057 $(CCC) -o $@ gui_x11.c 3058 3059objects/gui_photon.o: gui_photon.c 3060 $(CCC) -o $@ gui_photon.c 3061 3062objects/gui_mac.o: gui_mac.c 3063 $(CCC) -o $@ gui_mac.c 3064 3065objects/hangulin.o: hangulin.c 3066 $(CCC) -o $@ hangulin.c 3067 3068objects/if_cscope.o: if_cscope.c 3069 $(CCC) -o $@ if_cscope.c 3070 3071objects/if_xcmdsrv.o: if_xcmdsrv.c 3072 $(CCC) -o $@ if_xcmdsrv.c 3073 3074objects/if_lua.o: if_lua.c 3075 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3076 3077objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3078 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3079 3080mzscheme_base.c: 3081 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3082 3083objects/if_perl.o: auto/if_perl.c 3084 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3085 3086objects/if_perlsfio.o: if_perlsfio.c 3087 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3088 3089objects/if_python.o: if_python.c if_py_both.h 3090 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3091 3092objects/if_python3.o: if_python3.c if_py_both.h 3093 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3094 3095objects/if_ruby.o: if_ruby.c 3096 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3097 3098objects/if_tcl.o: if_tcl.c 3099 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3100 3101objects/integration.o: integration.c 3102 $(CCC) -o $@ integration.c 3103 3104objects/json.o: json.c 3105 $(CCC) -o $@ json.c 3106 3107objects/json_test.o: json_test.c 3108 $(CCC) -o $@ json_test.c 3109 3110objects/kword_test.o: kword_test.c 3111 $(CCC) -o $@ kword_test.c 3112 3113objects/list.o: list.c 3114 $(CCC) -o $@ list.c 3115 3116objects/main.o: main.c 3117 $(CCC) -o $@ main.c 3118 3119objects/mark.o: mark.c 3120 $(CCC) -o $@ mark.c 3121 3122objects/memfile.o: memfile.c 3123 $(CCC) -o $@ memfile.c 3124 3125objects/memfile_test.o: memfile_test.c 3126 $(CCC) -o $@ memfile_test.c 3127 3128objects/memline.o: memline.c 3129 $(CCC) -o $@ memline.c 3130 3131objects/menu.o: menu.c 3132 $(CCC) -o $@ menu.c 3133 3134objects/message.o: message.c 3135 $(CCC) -o $@ message.c 3136 3137objects/message_test.o: message_test.c 3138 $(CCC) -o $@ message_test.c 3139 3140objects/misc1.o: misc1.c 3141 $(CCC) -o $@ misc1.c 3142 3143objects/misc2.o: misc2.c 3144 $(CCC) -o $@ misc2.c 3145 3146objects/move.o: move.c 3147 $(CCC) -o $@ move.c 3148 3149objects/mbyte.o: mbyte.c 3150 $(CCC) -o $@ mbyte.c 3151 3152objects/normal.o: normal.c 3153 $(CCC) -o $@ normal.c 3154 3155objects/ops.o: ops.c 3156 $(CCC) -o $@ ops.c 3157 3158objects/option.o: option.c 3159 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3160 3161objects/os_beos.o: os_beos.c 3162 $(CCC) -o $@ os_beos.c 3163 3164objects/os_qnx.o: os_qnx.c 3165 $(CCC) -o $@ os_qnx.c 3166 3167objects/os_macosx.o: os_macosx.m 3168 $(CCC) -o $@ os_macosx.m 3169 3170objects/os_mac_conv.o: os_mac_conv.c 3171 $(CCC) -o $@ os_mac_conv.c 3172 3173objects/os_unix.o: os_unix.c 3174 $(CCC) -o $@ os_unix.c 3175 3176objects/os_mswin.o: os_mswin.c 3177 $(CCC) -o $@ os_mswin.c 3178 3179objects/winclip.o: winclip.c 3180 $(CCC) -o $@ winclip.c 3181 3182objects/pathdef.o: auto/pathdef.c 3183 $(CCC) -o $@ auto/pathdef.c 3184 3185objects/popupmnu.o: popupmnu.c 3186 $(CCC) -o $@ popupmnu.c 3187 3188objects/pty.o: pty.c 3189 $(CCC) -o $@ pty.c 3190 3191objects/quickfix.o: quickfix.c 3192 $(CCC) -o $@ quickfix.c 3193 3194objects/regexp.o: regexp.c regexp_nfa.c 3195 $(CCC) -o $@ regexp.c 3196 3197objects/screen.o: screen.c 3198 $(CCC) -o $@ screen.c 3199 3200objects/search.o: search.c 3201 $(CCC) -o $@ search.c 3202 3203objects/sha256.o: sha256.c 3204 $(CCC) -o $@ sha256.c 3205 3206objects/spell.o: spell.c 3207 $(CCC) -o $@ spell.c 3208 3209objects/spellfile.o: spellfile.c 3210 $(CCC) -o $@ spellfile.c 3211 3212objects/syntax.o: syntax.c 3213 $(CCC) -o $@ syntax.c 3214 3215objects/tag.o: tag.c 3216 $(CCC) -o $@ tag.c 3217 3218objects/term.o: term.c 3219 $(CCC) -o $@ term.c 3220 3221objects/terminal.o: terminal.c $(TERM_DEPS) 3222 $(CCC) -o $@ terminal.c 3223 3224objects/textprop.o: textprop.c 3225 $(CCC) -o $@ textprop.c 3226 3227objects/ui.o: ui.c 3228 $(CCC) -o $@ ui.c 3229 3230objects/undo.o: undo.c 3231 $(CCC) -o $@ undo.c 3232 3233objects/userfunc.o: userfunc.c 3234 $(CCC) -o $@ userfunc.c 3235 3236objects/window.o: window.c 3237 $(CCC) -o $@ window.c 3238 3239objects/workshop.o: workshop.c 3240 $(CCC) -o $@ workshop.c 3241 3242objects/wsdebug.o: wsdebug.c 3243 $(CCC) -o $@ wsdebug.c 3244 3245objects/netbeans.o: netbeans.c 3246 $(CCC) -o $@ netbeans.c 3247 3248objects/channel.o: channel.c 3249 $(CCC) -o $@ channel.c 3250 3251Makefile: 3252 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3253 3254CCCTERM = $(CCC_NF) $(VTERM_CFLAGS) $(ALL_CFLAGS) -DINLINE="" \ 3255 -DVSNPRINTF=vim_vsnprintf \ 3256 -DIS_COMBINING_FUNCTION=utf_iscomposing_uint \ 3257 -DWCWIDTH_FUNCTION=utf_uint2cells 3258 3259objects/encoding.o: libvterm/src/encoding.c $(TERM_DEPS) 3260 $(CCCTERM) -o $@ libvterm/src/encoding.c 3261 3262objects/keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) 3263 $(CCCTERM) -o $@ libvterm/src/keyboard.c 3264 3265objects/mouse.o: libvterm/src/mouse.c $(TERM_DEPS) 3266 $(CCCTERM) -o $@ libvterm/src/mouse.c 3267 3268objects/parser.o: libvterm/src/parser.c $(TERM_DEPS) 3269 $(CCCTERM) -o $@ libvterm/src/parser.c 3270 3271objects/pen.o: libvterm/src/pen.c $(TERM_DEPS) 3272 $(CCCTERM) -o $@ libvterm/src/pen.c 3273 3274objects/termscreen.o: libvterm/src/termscreen.c $(TERM_DEPS) 3275 $(CCCTERM) -o $@ libvterm/src/termscreen.c 3276 3277objects/state.o: libvterm/src/state.c $(TERM_DEPS) 3278 $(CCCTERM) -o $@ libvterm/src/state.c 3279 3280objects/unicode.o: libvterm/src/unicode.c $(TERM_DEPS) 3281 $(CCCTERM) -o $@ libvterm/src/unicode.c 3282 3283objects/vterm.o: libvterm/src/vterm.c $(TERM_DEPS) 3284 $(CCCTERM) -o $@ libvterm/src/vterm.c 3285 3286CCCDIFF = $(CCC_NF) $(ALL_CFLAGS) 3287 3288objects/xdiffi.o: xdiff/xdiffi.c $(XDIFF_INCL) 3289 $(CCCDIFF) -o $@ xdiff/xdiffi.c 3290 3291objects/xprepare.o: xdiff/xprepare.c $(XDIFF_INCL) 3292 $(CCCDIFF) -o $@ xdiff/xprepare.c 3293 3294objects/xutils.o: xdiff/xutils.c $(XDIFF_INCL) 3295 $(CCCDIFF) -o $@ xdiff/xutils.c 3296 3297objects/xemit.o: xdiff/xemit.c $(XDIFF_INCL) 3298 $(CCCDIFF) -o $@ xdiff/xemit.c 3299 3300objects/xhistogram.o: xdiff/xhistogram.c $(XDIFF_INCL) 3301 $(CCCDIFF) -o $@ xdiff/xhistogram.c 3302 3303objects/xpatience.o: xdiff/xpatience.c $(XDIFF_INCL) 3304 $(CCCDIFF) -o $@ xdiff/xpatience.c 3305 3306 3307############################################################################### 3308### MacOS X installation 3309### 3310### This installs a runnable Vim.app in $(prefix) 3311 3312REZ = /Developer/Tools/Rez 3313RESDIR = $(APPDIR)/Contents/Resources 3314VERSION = $(VIMMAJOR).$(VIMMINOR) 3315 3316### Common flags 3317M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3318 -DAPP_VER=$(VERSION) 3319 3320install_macosx: gui_bundle 3321# Remove the link to the runtime dir, don't want to copy all of that. 3322 -rm $(RESDIR)/vim/runtime 3323 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3324# Generate the help tags file now, it won't work with "make installruntime". 3325 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3326# Install the runtime files. Recursive! 3327 $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3328 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3329 VIMEXE=$$srcdir/$(VIMTARGET) \ 3330 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3331 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3332 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3333 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3334 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3335# Put the link back. 3336 ln -s `pwd`/../runtime $(RESDIR)/vim 3337# Copy rgb.txt, Mac doesn't always have X11 3338 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3339# TODO: Create the vimtutor and/or gvimtutor application. 3340 3341gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3342 bundle-language 3343 3344$(RESDIR): 3345 $(MKDIR_P) $@ 3346 3347bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3348# Make a link to the runtime directory, so that we can try out the executable 3349# without installing it. 3350 $(MKDIR_P) $(RESDIR)/vim 3351 -ln -s `pwd`/../runtime $(RESDIR)/vim 3352 3353bundle-executable: $(VIMTARGET) 3354 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3355 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3356 3357bundle-info: bundle-dir 3358 @echo "Creating PkgInfo" 3359 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3360 @echo "Creating Info.plist" 3361 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3362 3363bundle-resource: bundle-dir bundle-rsrc 3364 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3365 3366### Classic resources 3367# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3368# This file is also required for OS X Vim. 3369bundle-rsrc: os_mac.rsr.hqx 3370 @echo "Creating resource fork" 3371 python dehqx.py $< 3372 rm -f gui_mac.rsrc 3373 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3374 3375# po/Make_osx.pl says something about generating a Mac message file 3376# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3377# *really* be upset that Carbon Vim was not localised in 3378# Ukrainian? 3379# 3380#bundle-language: bundle-dir po/Make_osx.pl 3381# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3382bundle-language: bundle-dir 3383 3384$(APPDIR)/Contents: 3385 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3386 $(MKDIR_P) $(RESDIR)/English.lproj 3387 3388 3389############################################################################### 3390### (automatically generated by 'make depend') 3391### Dependencies: 3392objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3393 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3394 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3395 proto.h globals.h farsi.h arabic.h 3396objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3397 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3398 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3399 proto.h globals.h farsi.h arabic.h 3400objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3401 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3402 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3403 proto.h globals.h farsi.h arabic.h 3404objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3405 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3406 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3407 proto.h globals.h farsi.h arabic.h version.h 3408objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3409 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3410 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3411 proto.h globals.h farsi.h arabic.h 3412objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3413 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3414 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3415 proto.h globals.h farsi.h arabic.h 3416objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \ 3417 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3418 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3419 proto.h globals.h farsi.h arabic.h 3420objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3421 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3422 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3423 proto.h globals.h farsi.h arabic.h 3424objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3425 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3426 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3427 proto.h globals.h farsi.h arabic.h xdiff/xdiff.h vim.h 3428objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3429 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3430 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3431 proto.h globals.h farsi.h arabic.h 3432objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3433 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3434 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3435 proto.h globals.h farsi.h arabic.h 3436objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3437 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3438 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3439 proto.h globals.h farsi.h arabic.h version.h 3440objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3441 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3442 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3443 proto.h globals.h farsi.h arabic.h version.h 3444objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3445 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3446 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3447 proto.h globals.h farsi.h arabic.h version.h 3448objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3449 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3450 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3451 proto.h globals.h farsi.h arabic.h version.h 3452objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3453 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3454 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3455 proto.h globals.h farsi.h arabic.h ex_cmdidxs.h 3456objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3457 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3458 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3459 proto.h globals.h farsi.h arabic.h 3460objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3461 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3462 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3463 proto.h globals.h farsi.h arabic.h 3464objects/farsi.o: farsi.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3465 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3466 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3467 proto.h globals.h farsi.h arabic.h 3468objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3469 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3470 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3471 proto.h globals.h farsi.h arabic.h 3472objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3473 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3474 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3475 proto.h globals.h farsi.h arabic.h 3476objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3477 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3478 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3479 proto.h globals.h farsi.h arabic.h 3480objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3481 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3482 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3483 proto.h globals.h farsi.h arabic.h version.h 3484objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3485 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3486 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3487 proto.h globals.h farsi.h arabic.h 3488objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \ 3489 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3490 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3491 proto.h globals.h farsi.h arabic.h if_cscope.h 3492objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \ 3493 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3494 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3495 proto.h globals.h farsi.h arabic.h version.h 3496objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3497 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3498 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3499 proto.h globals.h farsi.h arabic.h 3500objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3501 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3502 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3503 proto.h globals.h farsi.h arabic.h 3504objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3505 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3506 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3507 proto.h globals.h farsi.h arabic.h 3508objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3509 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3510 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3511 proto.h globals.h farsi.h arabic.h 3512objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3513 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3514 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3515 proto.h globals.h farsi.h arabic.h 3516objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3517 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3518 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3519 proto.h globals.h farsi.h arabic.h 3520objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3521 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3522 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3523 proto.h globals.h farsi.h arabic.h 3524objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3525 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3526 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3527 proto.h globals.h farsi.h arabic.h 3528objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3529 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3530 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3531 proto.h globals.h farsi.h arabic.h version.h 3532objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3533 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3534 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3535 proto.h globals.h farsi.h arabic.h 3536objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3537 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3538 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3539 proto.h globals.h farsi.h arabic.h 3540objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3541 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3542 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3543 proto.h globals.h farsi.h arabic.h 3544objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3545 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3546 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3547 proto.h globals.h farsi.h arabic.h 3548objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3549 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3550 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3551 proto.h globals.h farsi.h arabic.h 3552objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3553 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3554 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3555 proto.h globals.h farsi.h arabic.h 3556objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3557 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3558 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3559 proto.h globals.h farsi.h arabic.h os_unixx.h 3560objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \ 3561 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3562 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3563 proto.h globals.h farsi.h arabic.h 3564objects/popupmnu.o: popupmnu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3565 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3566 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3567 proto.h globals.h farsi.h arabic.h 3568objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3569 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3570 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3571 proto.h globals.h farsi.h arabic.h 3572objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3573 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3574 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3575 proto.h globals.h farsi.h arabic.h 3576objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3577 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3578 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3579 proto.h globals.h farsi.h arabic.h regexp_nfa.c 3580objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3581 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3582 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3583 proto.h globals.h farsi.h arabic.h 3584objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3585 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3586 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3587 proto.h globals.h farsi.h arabic.h 3588objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3589 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3590 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3591 proto.h globals.h farsi.h arabic.h 3592objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3593 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3594 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3595 proto.h globals.h farsi.h arabic.h 3596objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \ 3597 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3598 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3599 proto.h globals.h farsi.h arabic.h 3600objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3601 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3602 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3603 proto.h globals.h farsi.h arabic.h 3604objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3605 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3606 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3607 proto.h globals.h farsi.h arabic.h 3608objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3609 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3610 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3611 proto.h globals.h farsi.h arabic.h libvterm/include/vterm.h \ 3612 libvterm/include/vterm_keycodes.h 3613objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3614 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3615 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3616 proto.h globals.h farsi.h arabic.h libvterm/include/vterm.h \ 3617 libvterm/include/vterm_keycodes.h 3618objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3619 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3620 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3621 proto.h globals.h farsi.h arabic.h 3622objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3623 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3624 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3625 proto.h globals.h farsi.h arabic.h 3626objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3627 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3628 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3629 proto.h globals.h farsi.h arabic.h 3630objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3631 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3632 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3633 proto.h globals.h farsi.h arabic.h 3634objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3635 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3636 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3637 proto.h globals.h farsi.h arabic.h version.h 3638objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3639 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3640 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3641 proto.h globals.h farsi.h arabic.h 3642objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3643 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3644 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3645 proto.h globals.h farsi.h arabic.h 3646objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3647 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3648 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3649 proto.h globals.h farsi.h arabic.h gui_gtk_f.h 3650objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \ 3651 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3652 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3653 proto.h globals.h farsi.h arabic.h gui_gtk_f.h 3654objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \ 3655 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3656 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3657 proto.h globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3658 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3659 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3660 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3661 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3662 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3663 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3664 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3665 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3666 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3667 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3668 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3669 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3670 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3671 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3672 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3673 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3674 ../pixmaps/tb_minwidth.xpm 3675objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \ 3676 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3677 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3678 proto.h globals.h farsi.h arabic.h 3679objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \ 3680 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3681 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3682 proto.h globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3683objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \ 3684 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3685 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3686 proto.h globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3687 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3688 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3689 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3690 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3691 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3692 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3693 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3694 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3695 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3696 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3697 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3698 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3699 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3700 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3701 ../pixmaps/tb_minwidth.xpm 3702objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \ 3703 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3704 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3705 proto.h globals.h farsi.h arabic.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3706 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3707objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3708 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3709 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3710 proto.h globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \ 3711 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3712objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \ 3713 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3714 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3715 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3716objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \ 3717 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3718 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3719 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3720objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \ 3721 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3722 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3723 proto.h globals.h farsi.h arabic.h json.c 3724objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \ 3725 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3726 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3727 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h charset.c 3728objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \ 3729 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3730 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3731 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h memfile.c 3732objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \ 3733 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3734 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3735 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h message.c 3736objects/hangulin.o: hangulin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3737 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3738 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3739 proto.h globals.h farsi.h arabic.h 3740objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3741 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3742 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3743 proto.h globals.h farsi.h arabic.h 3744objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3745 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3746 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3747 proto.h globals.h farsi.h arabic.h if_mzsch.h 3748objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \ 3749 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3750 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3751 proto.h globals.h farsi.h arabic.h 3752objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \ 3753 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3754 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3755 proto.h globals.h farsi.h arabic.h 3756objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \ 3757 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3758 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3759 proto.h globals.h farsi.h arabic.h if_py_both.h 3760objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \ 3761 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3762 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3763 proto.h globals.h farsi.h arabic.h if_py_both.h 3764objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3765 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3766 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3767 proto.h globals.h farsi.h arabic.h 3768objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \ 3769 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3770 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3771 proto.h globals.h farsi.h arabic.h version.h 3772objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \ 3773 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3774 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3775 proto.h globals.h farsi.h arabic.h 3776objects/workshop.o: workshop.c protodef.h auto/config.h integration.h vim.h \ 3777 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3778 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3779 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h version.h \ 3780 workshop.h 3781objects/wsdebug.o: wsdebug.c 3782objects/integration.o: integration.c vim.h protodef.h auto/config.h feature.h \ 3783 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3784 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3785 proto.h globals.h farsi.h arabic.h integration.h 3786objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3787 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3788 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3789 proto.h globals.h farsi.h arabic.h version.h 3790objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3791 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3792 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3793 proto.h globals.h farsi.h arabic.h 3794objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3795objects/encoding.o: libvterm/src/encoding.c libvterm/src/vterm_internal.h \ 3796 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3797 libvterm/src/encoding/DECdrawing.inc libvterm/src/encoding/uk.inc 3798objects/keyboard.o: libvterm/src/keyboard.c libvterm/src/vterm_internal.h \ 3799 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3800 libvterm/src/utf8.h 3801objects/mouse.o: libvterm/src/mouse.c libvterm/src/vterm_internal.h \ 3802 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3803 libvterm/src/utf8.h 3804objects/parser.o: libvterm/src/parser.c libvterm/src/vterm_internal.h \ 3805 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3806objects/pen.o: libvterm/src/pen.c libvterm/src/vterm_internal.h \ 3807 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3808objects/state.o: libvterm/src/state.c libvterm/src/vterm_internal.h \ 3809 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3810objects/termscreen.o: libvterm/src/termscreen.c libvterm/src/vterm_internal.h \ 3811 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3812 libvterm/src/rect.h libvterm/src/utf8.h 3813objects/unicode.o: libvterm/src/unicode.c libvterm/src/vterm_internal.h \ 3814 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3815objects/vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \ 3816 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3817 libvterm/src/utf8.h 3818objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \ 3819 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3820 auto/config.h feature.h os_unix.h \ 3821 auto/osdef.h ascii.h keymap.h term.h \ 3822 macros.h option.h beval.h proto/gui_beval.pro \ 3823 structs.h regexp.h gui.h alloc.h \ 3824 ex_cmds.h spell.h proto.h globals.h \ 3825 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3826 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3827objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \ 3828 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3829 auto/config.h feature.h os_unix.h \ 3830 auto/osdef.h ascii.h keymap.h term.h \ 3831 macros.h option.h beval.h proto/gui_beval.pro \ 3832 structs.h regexp.h gui.h alloc.h \ 3833 ex_cmds.h spell.h proto.h globals.h \ 3834 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3835 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3836objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \ 3837 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3838 auto/config.h feature.h os_unix.h \ 3839 auto/osdef.h ascii.h keymap.h term.h \ 3840 macros.h option.h beval.h proto/gui_beval.pro \ 3841 structs.h regexp.h gui.h alloc.h \ 3842 ex_cmds.h spell.h proto.h globals.h \ 3843 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3844 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3845objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \ 3846 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3847 auto/config.h feature.h os_unix.h \ 3848 auto/osdef.h ascii.h keymap.h term.h \ 3849 macros.h option.h beval.h proto/gui_beval.pro \ 3850 structs.h regexp.h gui.h alloc.h \ 3851 ex_cmds.h spell.h proto.h globals.h \ 3852 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3853 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3854objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \ 3855 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3856 auto/config.h feature.h os_unix.h \ 3857 auto/osdef.h ascii.h keymap.h term.h \ 3858 macros.h option.h beval.h proto/gui_beval.pro \ 3859 structs.h regexp.h gui.h alloc.h \ 3860 ex_cmds.h spell.h proto.h globals.h \ 3861 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3862 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3863objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \ 3864 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3865 auto/config.h feature.h os_unix.h \ 3866 auto/osdef.h ascii.h keymap.h term.h \ 3867 macros.h option.h beval.h proto/gui_beval.pro \ 3868 structs.h regexp.h gui.h alloc.h \ 3869 ex_cmds.h spell.h proto.h globals.h \ 3870 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3871 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3872
