1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples you can uncomment: 321#CONF_ARGS1 = --exec-prefix=/usr 322#CONF_ARGS2 = --with-vim-name=vim8 --with-ex-name=ex8 --with-view-name=view8 323#CONF_ARGS3 = --with-global-runtime=/etc/vim,/usr/share/vim 324#CONF_ARGS4 = --with-local-dir=/usr/share 325#CONF_ARGS5 = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS6 = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406# This requires at least "normal" features, "tiny" and "small" don't work. 407#CONF_OPT_LUA = --enable-luainterp 408#CONF_OPT_LUA = --enable-luainterp=dynamic 409#CONF_OPT_LUA = --enable-luainterp --with-luajit 410#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 411# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 412#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 413 414# MZSCHEME 415# Uncomment this when you want to include the MzScheme interface. 416# NOTE: does not work well together with valgrind. 417#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 418# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 420#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 421#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 422 423# PERL 424# Uncomment one of these when you want to include the Perl interface. 425# First one is for static linking, second one for dynamic loading. 426# The Perl option sometimes causes problems, because it adds extra flags 427# 428# to the command line. If you see strange flags during compilation, check in 429# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 430# the next line. 431# When you get an error for a missing "perl.exp" file, try creating an empty 432# one: "touch perl.exp". 433# This requires at least "normal" features, "tiny" and "small" don't work. 434#CONF_OPT_PERL = --enable-perlinterp 435#CONF_OPT_PERL = --enable-perlinterp=dynamic 436 437# PYTHON 438# Uncomment lines here when you want to include the Python interface. 439# This requires at least "normal" features, "tiny" and "small" don't work. 440# NOTE: This may cause threading to be enabled, which has side effects (such 441# as using different libraries and debugging becomes more difficult). 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7 450#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 451#CONF_OPT_PYTHON3 = --enable-python3interp 452#CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6 453#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 454 455# RUBY 456# Uncomment this when you want to include the Ruby interface. 457# First one for static linking, second one for loading when used. 458# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 459# This requires at least "normal" features, "tiny" and "small" don't work. 460#CONF_OPT_RUBY = --enable-rubyinterp 461#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 462#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 463 464# TCL 465# Uncomment this when you want to include the Tcl interface. 466# First one is for static linking, second one for dynamic loading. 467#CONF_OPT_TCL = --enable-tclinterp 468#CONF_OPT_TCL = --enable-tclinterp=dynamic 469#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 470 471# CSCOPE 472# Uncomment this when you want to include the Cscope interface. 473#CONF_OPT_CSCOPE = --enable-cscope 474 475# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 476# Motif version must have XPM libraries (see |netbeans-xpm|). 477# Uncomment this when you do not want the netbeans interface. 478#CONF_OPT_NETBEANS = --disable-netbeans 479 480# CHANNEL - inter process communication. Same conditions as NetBeans. 481# Uncomment this when you do not want inter process communication. 482#CONF_OPT_CHANNEL = --disable-channel 483 484# TERMINAL - Terminal emulator support, :terminal command. Requires the 485# channel feature. The default is enable for when using "huge" features. 486# Uncomment the first line when you want terminal emulator support for 487# not-huge builds. Uncomment the second line when you don't want terminal 488# emulator support in the huge build. 489#CONF_OPT_TERMINAL = --enable-terminal 490#CONF_OPT_TERMINAL = --disable-terminal 491 492# MULTIBYTE - To edit multi-byte characters. 493# This is now always enabled. 494 495# When building with at least "big" features, right-left and Arabic 496# features are enabled. Use this to disable them. 497#CONF_OPT_MULTIBYTE = --disable-rightleft --disable-arabic 498 499# NLS - National Language Support 500# Uncomment this when you do not want to support translated messages, even 501# though configure can find support for it. 502#CONF_OPT_NLS = --disable-nls 503 504# XIM - X Input Method. Special character input support for X11 (Chinese, 505# Japanese, special symbols, etc). Also needed for dead-key support. 506# When omitted it's automatically enabled for the X-windows GUI. 507# HANGUL - Input Hangul (Korean) language using internal routines. 508# Uncomment one of these when you want to input a multibyte language. 509#CONF_OPT_INPUT = --enable-xim 510#CONF_OPT_INPUT = --disable-xim 511#CONF_OPT_INPUT = --enable-hangulinput 512 513# FONTSET - X fontset support for output of languages with many characters. 514# Uncomment this when you want to output a multibyte language. 515#CONF_OPT_OUTPUT = --enable-fontset 516 517# ACL - Uncomment this when you do not want to include ACL support, even 518# though your system does support it. E.g., when it's buggy. 519#CONF_OPT_ACL = --disable-acl 520 521# gpm - For mouse support on Linux console via gpm 522# Uncomment this when you do not want to include gpm support, even 523# though you have gpm libraries and includes. 524#CONF_OPT_GPM = --disable-gpm 525 526# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 527# Uncomment this when you do not want do include sysmouse support, even 528# though you have /dev/sysmouse and includes. 529#CONF_OPT_SYSMOUSE = --disable-sysmouse 530 531# FEATURES - For creating Vim with more or less features 532# Uncomment one of these lines when you want to include few to many features. 533# The default is "huge" for most systems. 534#CONF_OPT_FEAT = --with-features=tiny 535#CONF_OPT_FEAT = --with-features=small 536#CONF_OPT_FEAT = --with-features=normal 537#CONF_OPT_FEAT = --with-features=big 538#CONF_OPT_FEAT = --with-features=huge 539 540# COMPILED BY - For including a specific e-mail address for ":version". 541#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 542 543# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 544# (otherwise Vim configure will try to include xterm titlebar access) 545# Also disable the GUI above, otherwise it will be included anyway. 546# When both GUI and X11 have been disabled this may save about 15% of the 547# code and make Vim startup quicker. 548#CONF_OPT_X = --without-x 549 550# X WINDOWS DIRECTORY - specify X directories 551# If configure can't find you X stuff, or if you have multiple X11 derivatives 552# installed, you may wish to specify which one to use. 553# Select nothing to let configure choose. 554# This here selects openwin (as found on sun). 555#XROOT = /usr/openwin 556#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 557 558# X11 Session Management Protocol support 559# Vim will try to use XSMP to catch the user logging out if there are unsaved 560# files. Uncomment this line to disable that (it prevents vim trying to open 561# communications with the session manager). 562#CONF_OPT_XSMP = --disable-xsmp 563 564# You may wish to include xsmp but use exclude xsmp-interact if the logout 565# XSMP functionality does not work well with your session-manager (at time of 566# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 567# applications after Vim has cancelled a logout (until Vim quits). This 568# *might* be the Vim code, but is more likely a bug in early GNOME-1. 569# This disables the dialog that asks you if you want to save files or not. 570#CONF_OPT_XSMP = --disable-xsmp-interact 571 572# If you want to always automatically add a servername, also in the terminal. 573#CONF_OPT_AUTOSERVE = --enable-autoservername 574 575# COMPILER - Name of the compiler {{{1 576# The default from configure will mostly be fine, no need to change this, just 577# an example. If a compiler is defined here, configure will use it rather than 578# probing for one. It is dangerous to change this after configure was run. 579# Make will use your choice then -- but beware: Many things may change with 580# another compiler. It is wise to run 'make reconfig' to start all over 581# again. 582#CC = cc 583#CC = gcc 584#CC = clang 585 586# COMPILER FLAGS - change as you please. Either before running {{{1 587# configure or afterwards. For examples see below. 588# When using -g with some older versions of Linux you might get a 589# statically linked executable. 590# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 591#CFLAGS = -g 592#CFLAGS = -O 593 594# Optimization limits - depends on the compiler. Automatic check in configure 595# doesn't work very well, because many compilers only give a warning for 596# unrecognized arguments. 597#CFLAGS = -O -OPT:Olimit=2600 598#CFLAGS = -O -Olimit 2000 599#CFLAGS = -O -FOlimit,2000 600 601# Often used for GCC: mixed optimizing, lot of optimizing, debugging 602#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 603#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 604#CFLAGS = -g -Wall -Wmissing-prototypes 605#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 606#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 607#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 608 609# Use this with GCC to check for mistakes, unused arguments, etc. 610# Note: If you use -Wextra and get warnings in GTK code about function 611# parameters, you can add -Wno-cast-function-type 612#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 613# Add -Wpedantic to find // comments and other C99 constructs. 614# Better disable Perl and Python to avoid a lot of warnings. 615#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 616#CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 617#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 618#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 619 620# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 621# allocated memory (and makes every malloc()/free() very slow). 622# Electric Fence is free (search ftp sites). 623# You may want to set the EF_PROTECT_BELOW environment variable to check the 624# other side of allocated memory. 625# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 626# as root: sysctl -w vm.max_proc_mmap=30000 627#EXTRA_LIBS = /usr/local/lib/libefence.a 628 629# Autoconf binary. 630AUTOCONF = autoconf 631 632# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 633#PURIFY = purify 634 635# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 636# Used for the unittest targets. 637# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 638 639# NBDEBUG - debugging the netbeans interface. 640#EXTRA_DEFS = -DNBDEBUG 641 642# }}} 643 644# LINT - for running lint 645# For standard Unix lint 646LINT = lint 647LINT_OPTIONS = -beprxzF 648# For splint 649# It doesn't work well, crashes on include files and non-ascii characters. 650#LINT = splint 651#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 652 653# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 654# Might not work with GUI or Perl. 655# After running Vim see the profile result with: gprof vim gmon.out | vim - 656# Need to recompile everything after changing this: "make clean" "make". 657#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 658#PROFILE_LIBS = -pg 659 660# GCC 5 and later need the -no-pie argument. 661#PROFILE_LIBS = -pg -no-pie 662 663# For unknown reasons adding "-lc" fixes a linking problem with some versions 664# of GCC. That's probably a bug in the "-pg" implementation. 665#PROFILE_LIBS = -pg -lc 666 667 668# TEST COVERAGE - Uncomment the two lines below the explanation to get code 669# coverage information. (provided by Yegappan Lakshmanan) 670# 1. make clean, run configure and build Vim as usual. 671# 2. Generate the baseline code coverage information: 672# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 673# 3. Run "make test" to run the unit tests. The code coverage information will 674# be generated in the src/objects directory. 675# 4. Generate the code coverage information from the tests: 676# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 677# 5. Combine the baseline and test code coverage data: 678# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 679# 6. Process the test coverage data and generate a report in html: 680# $ genhtml objects/coverage_total.info -o objects 681# 7. Open the objects/index.html file in a web browser to view the coverage 682# information. 683# 684# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 685# LDFLAGS=--coverage 686 687 688# Uncomment one of the next two lines to compile Vim with the 689# address sanitizer or with the undefined sanitizer. Works with gcc and 690# clang. May make Vim twice as slow. Errors reported on stderr. 691# More at: https://code.google.com/p/address-sanitizer/ 692#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 693#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 694SANITIZER_LIBS = $(SANITIZER_CFLAGS) 695 696# MEMORY LEAK DETECTION 697# Requires installing the ccmalloc library. 698# Configuration is in the .ccmalloc or ~/.ccmalloc file. 699# Doesn't work very well, since memory linked to from global variables 700# (in libraries) is also marked as leaked memory. 701#LEAK_CFLAGS = -DEXITFREE 702#LEAK_LIBS = -lccmalloc 703 704# Uncomment this line to have Vim call abort() when an internal error is 705# detected. Useful when using a tool to find errors. 706#ABORT_CFLAGS = -DABORT_ON_INTERNAL_ERROR 707 708##################################################### 709### Specific systems, check if yours is listed! ### {{{ 710##################################################### 711 712### Uncomment things here only if the values chosen by configure are wrong. 713### It's better to adjust configure.ac and "make autoconf", if you can! 714### Then send the required changes to configure.ac to the bugs list. 715 716### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 717### 718#CC = shlicc2 719#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 720 721### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 722### The first probably works on all systems 723### The second should work a bit better on newer systems 724### The third should work a bit better on HPUX 11.11 725### Information provided by: Richard Allen <[email protected]> 726#CC = c89 -D_HPUX_SOURCE 727#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 728#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 729 730### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 731### when the default (ISO) digraphs look completely wrong. 732### After changing this do "touch digraph.c; make". 733#EXTRA_DEFS = -DHPUX_DIGRAPHS 734 735### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 736### is too small to compile many routines. It produces too much defining 737### and no space errors. 738### Uncomment the following to specify a larger macro definition table. 739#CFLAGS = -Wp,-H256000 740 741### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 742### libraries in /usr/lib instead of /lib (avoiding transition links). 743### Information provided by: David Green 744#XROOT = /usr 745#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 746#GUI_INC_LOC = -I/usr/include/Motif1.2 747#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 748 749### (5) AIX 4.1.4 with cc 750#CFLAGS = -O -qmaxmem=8192 751 752### AIX with c89 (Walter Briscoe) 753#CC = c89 754#CPPFLAGS = -D_ALL_SOURCE 755 756### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 757# needed to avoid a problem where strings.h gets included 758#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 759 760### (W) Solaris with multi-threaded libraries (-lthread): 761### If suspending doesn't work properly, try using this line: 762#EXTRA_DEFS = -D_REENTRANT 763 764### (7) Solaris 2.4/2.5 with Centerline compiler 765#CC = clcc 766#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 767#CFLAGS = -O 768 769### (9) Solaris 2.x with cc (SunPro), using Athena. 770### Only required for compiling gui_at_sb.c. 771### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 772### Use one of the lines (either Full ANSI or no ANSI at all) 773#CFLAGS = $(CFLAGS) -Xc 774#CFLAGS = $(CFLAGS) -Xs 775 776### Solaris 2.3 with X11 and specific cc 777#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 778 779### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 780#CC = /usr/ucb/cc 781#EXTRA_LIBS = -R/usr/ucblib 782 783### Solaris with Forte Developer and NetBeans. 784# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 785#CC = cc 786#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 787#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 788#XPM_IPATH = -I$(XPM_DIR)/include 789#EXTRA_LIBS = $(XPM_LIB) 790#EXTRA_IPATHS = $(XPM_IPATH) 791#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 792 793### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 794#LDFLAGS = -lw -ldl -lXmu 795#GUI_LIB_LOC = -L/usr/local/lib 796 797### (8) Unisys 6035 (Glauber Ribeiro) 798#EXTRA_LIBS = -lnsl -lsocket -lgen 799 800### When builtin functions cause problems with gcc (for Sun 4.1.x) 801#CFLAGS = -O2 -Wall -traditional -Wno-implicit 802 803### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 804#EXTRA_DEFS = -DDOMAIN 805#CFLAGS= -O -A systype,bsd4.3 806 807### Coherent 4.2.10 on Intel 386 platform 808#EXTRA_DEFS = -Dvoid=int 809#EXTRA_LIBS = -lterm -lsocket 810 811### SCO 3.2, with different library name for terminfo 812#EXTRA_LIBS = -ltinfo 813 814### UTS2 for Amdahl UTS 2.1.x 815#EXTRA_DEFS = -DUTS2 816#EXTRA_LIBS = -lsocket 817 818### UTS4 for Amdahl UTS 4.x 819#EXTRA_DEFS = -DUTS4 -Xa 820 821### USL for Unix Systems Laboratories (SYSV 4.2) 822#EXTRA_DEFS = -DUSL 823 824### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 825#CC= gcc -D_POSIX_SOURCE 826#CFLAGS= -O2 827#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 828 829### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 830### Also use the CONF_TERM_LIB below! 831#EXTRA_LIBS = -lgen 832 833### (D) QNX (by G.F. Desrochers) 834#CFLAGS = -g -O -mf -4 835 836### (F) QNX (by John Oleynick) 837# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 838# CONF_OPT_X = --without-x. 839# 2. make config 840# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 841# have -ldir (does config find it somewhere?) and -ltermcap has at 842# least one problem so I use termlib.o instead. The problem with 843# termcap is that it segfaults if you call it with the name of 844# a non-existent terminal type. 845# 4. edit auto/config.h and add #define USE_TMPNAM 846# 5. add termlib.o to OBJ 847# 6. make 848 849### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 850#EXTRA_LIBS = -lgen 851 852### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 853#EXTRA_LIBS = -lgen -lnsl 854### For SINIX-Y this is needed for the right prototype of gettimeofday() 855#EXTRA_DEFS = -D_XPG_IV 856 857### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 858# Use both "-F O3" lines for optimization or the "-g" line for debugging 859#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 860#CFLAGS = -F O3 -DSINIXN 861#LDFLAGS = -F O3 862#CFLAGS = -g -DSINIXN 863 864### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 865#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 866#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 867 868### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 869#GUI_INC_LOC = -I/usr/include 870#GUI_LIB_LOC = -L/usr/lib 871#EXTRA_LIBS = -lgen 872 873### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 874#GUI_INC_LOC = -I/usr/necccs/include 875#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 876#XROOT = /usr/necccs 877#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 878#EXTRA_LIBS = -lsocket -lgen 879 880### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 881# Not needed for Irix 5.3, Ives Aerts reported 882#EXTRA_LIBS = -lmalloc -lc_s 883# Irix 4.0, when regexp and regcmp cannot be found when linking: 884#EXTRA_LIBS = -lmalloc -lc_s -lPW 885 886### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 887# Note: This newer option style is used with the MipsPro compilers ONLY if 888# you are compiling an "n32" or "64" ABI binary (use either a -n32 889# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 890# then the CFLAGS option format will be the typical style (i.e. 891# -Olimit 3000). 892#CFLAGS = -OPT:Olimit=3000 -O 893 894### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 895# compiler features! Beware, the optimization is EXTREMELY thorough 896# and takes quite a long time. 897# Note: See the note above. Here, the -mips3 option automatically 898# enables either the "n32" or "64" ABI, depending on what machine you 899# are compiling on (n32 is explicitly enabled here, just to make sure). 900#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 901#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 902 903### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 904### Suggested by Jon Wright <[email protected]>. 905### Tested on R8000 IRIX6.1 Power Indigo2. 906### Check /etc/compiler.defaults for your compiler settings. 907# either (for 64 bit pointers) uncomment the following line 908#GUI_LIB_LOC = -L/usr/lib64 909# then 910# 1) make config 911# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 912# 3) make 913# 914# or (for 32bit pointers) uncomment the following line 915#EXTRA_DEFS = -n32 916#GUI_LIB_LOC = -L/usr/lib32 917# then 918# 1) make config 919# 2) edit auto/config.mk, add -n32 to LDFLAGS 920# 3) make 921# 922#Alternatively: use -o32 instead of -n32. 923### 924 925### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 926### which is found by configure, doesn't work correctly. Symptom is the 927### error message "Termcap entry too long". Uncomment the next line. 928### On AIX 4.2.1 (and other versions probably), libtermcap is reported 929### not to display properly. 930### after changing this, you need to do "make reconfig". 931#CONF_TERM_LIB = --with-tlib=curses 932 933### (E) If you want to use termlib library instead of the automatically found 934### one. After changing this, you need to do "make reconfig". 935#CONF_TERM_LIB = --with-tlib=termlib 936 937### (a) ESIX V4.2 (Reinhard Wobst) 938#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 939 940### (c) Tandem/NSK (Matthew Woehlke) 941#EXTRA_LIBS = -lfloss 942 943### If you want to use ncurses library instead of the automatically found one 944### after changing this, you need to do "make reconfig". 945#CONF_TERM_LIB = --with-tlib=ncurses 946 947### For GCC on MS-Windows, the ".exe" suffix will be added. 948#EXEEXT = .exe 949#LNKEXT = .exe 950 951### (O) For LynxOS 2.5.0, tested on PC. 952#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 953### For LynxOS 3.0.1, tested on PPC 954#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 955### For LynxOS 3.1.0, tested on PC 956#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 957 958 959### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 960### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 961#CFLAGS = -O -Qtarget=m88110compat 962#EXTRA_LIBS = -lgen 963 964# The value of QUOTESED comes from auto/config.mk. 965# Uncomment the next line to use the default value. 966# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 967 968##################### end of system specific lines ################### }}} 969 970### Names of the programs and targets {{{1 971VIMTARGET = $(VIMNAME)$(EXEEXT) 972EXTARGET = $(EXNAME)$(LNKEXT) 973VIEWTARGET = $(VIEWNAME)$(LNKEXT) 974GVIMNAME = g$(VIMNAME) 975GVIMTARGET = $(GVIMNAME)$(LNKEXT) 976GVIEWNAME = g$(VIEWNAME) 977GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 978RVIMNAME = r$(VIMNAME) 979RVIMTARGET = $(RVIMNAME)$(LNKEXT) 980RVIEWNAME = r$(VIEWNAME) 981RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 982RGVIMNAME = r$(GVIMNAME) 983RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 984RGVIEWNAME = r$(GVIEWNAME) 985RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 986VIMDIFFNAME = $(VIMNAME)diff 987GVIMDIFFNAME = g$(VIMDIFFNAME) 988VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 989GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 990EVIMNAME = e$(VIMNAME) 991EVIMTARGET = $(EVIMNAME)$(LNKEXT) 992EVIEWNAME = e$(VIEWNAME) 993EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 994 995### Names of the tools that are also made {{{1 996TOOLS = xxd/xxd$(EXEEXT) 997 998### Installation directories. The defaults come from configure. {{{1 999# 1000### prefix the top directory for the data (default "/usr/local") 1001# 1002# Uncomment the next line to install Vim in your home directory. 1003#prefix = $(HOME) 1004 1005### exec_prefix is the top directory for the executable (default $(prefix)) 1006# 1007# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 1008#exec_prefix = /usr/machine 1009 1010### BINDIR dir for the executable (default "$(exec_prefix)/bin") 1011### MANDIR dir for the manual pages (default "$(prefix)/man") 1012### DATADIR dir for the other files (default "$(prefix)/lib" or 1013# "$(prefix)/share") 1014# They may be different when using different architectures for the 1015# executable and a common directory for the other files. 1016# 1017# Uncomment the next line to install Vim in "/usr/bin" 1018#BINDIR = /usr/bin 1019# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1020#MANDIR = /usr/share/man 1021# Uncomment the next line to install Vim help files in "/usr/share/vim" 1022#DATADIR = /usr/share 1023 1024### DESTDIR root of the installation tree. This is prepended to the other 1025# directories. This directory must exist. 1026#DESTDIR = ~/pkg/vim 1027 1028### Directory of the man pages 1029MAN1DIR = /man1 1030 1031### Vim version (adjusted by a script) 1032VIMMAJOR = 8 1033VIMMINOR = 1 1034 1035### Location of Vim files (should not need to be changed, and {{{1 1036### some things might not work when they are changed!) 1037VIMDIR = /vim 1038VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1039HELPSUBDIR = /doc 1040COLSUBDIR = /colors 1041SYNSUBDIR = /syntax 1042INDSUBDIR = /indent 1043AUTOSUBDIR = /autoload 1044PLUGSUBDIR = /plugin 1045FTPLUGSUBDIR = /ftplugin 1046LANGSUBDIR = /lang 1047COMPSUBDIR = /compiler 1048KMAPSUBDIR = /keymap 1049MACROSUBDIR = /macros 1050PACKSUBDIR = /pack 1051TOOLSSUBDIR = /tools 1052TUTORSUBDIR = /tutor 1053SPELLSUBDIR = /spell 1054PRINTSUBDIR = /print 1055PODIR = po 1056 1057### VIMLOC common root of the Vim files (all versions) 1058### VIMRTLOC common root of the runtime Vim files (this version) 1059### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1060### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1061### HELPSUBLOC location for help files 1062### COLSUBLOC location for colorscheme files 1063### SYNSUBLOC location for syntax files 1064### INDSUBLOC location for indent files 1065### AUTOSUBLOC location for standard autoload files 1066### PLUGSUBLOC location for standard plugin files 1067### FTPLUGSUBLOC location for ftplugin files 1068### LANGSUBLOC location for language files 1069### COMPSUBLOC location for compiler files 1070### KMAPSUBLOC location for keymap files 1071### MACROSUBLOC location for macro files 1072### PACKSUBLOC location for packages 1073### TOOLSSUBLOC location for tools files 1074### TUTORSUBLOC location for tutor files 1075### SPELLSUBLOC location for spell files 1076### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1077### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1078### You can override these if you want to install them somewhere else. 1079### Edit feature.h for compile-time settings. 1080VIMLOC = $(DATADIR)$(VIMDIR) 1081VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1082VIMRCLOC = $(VIMLOC) 1083HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1084COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1085SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1086INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1087AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1088PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1089FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1090LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1091COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1092KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1093MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1094PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1095TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1096TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1097SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1098PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1099SCRIPTLOC = $(VIMRTLOC) 1100 1101### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1102### the runtime directory is not below it. 1103#VIMRUNTIMEDIR = $(VIMRTLOC) 1104 1105### Name of the defaults/evim/mswin file target. 1106VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1107EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1108MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1109 1110### Name of the menu file target. 1111SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1112SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1113SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1114 1115### Name of the bugreport file target. 1116SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1117 1118### Name of the rgb.txt file target. 1119SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1120 1121### Name of the file type detection file target. 1122SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1123 1124### Name of the file type detection file target. 1125SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1126 1127### Name of the file type detection script file target. 1128SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1129 1130### Name of the ftplugin-on file target. 1131SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1132 1133### Name of the ftplugin-off file target. 1134SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1135 1136### Name of the indent-on file target. 1137SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1138 1139### Name of the indent-off file target. 1140SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1141 1142### Name of the option window script file target. 1143SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1144 1145# Program to install the program in the target directory. Could also be "mv". 1146INSTALL_PROG = cp 1147 1148# Program to install the data in the target directory. Cannot be "mv"! 1149INSTALL_DATA = cp 1150INSTALL_DATA_R = cp -r 1151 1152### Program to run on installed binary. Use the second one to disable strip. 1153#STRIP = strip 1154#STRIP = /bin/true 1155 1156### Permissions for binaries {{{1 1157BINMOD = 755 1158 1159### Permissions for man page 1160MANMOD = 644 1161 1162### Permissions for help files 1163HELPMOD = 644 1164 1165### Permissions for Perl and shell scripts 1166SCRIPTMOD = 755 1167 1168### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1169VIMSCRIPTMOD = 644 1170 1171### Permissions for all directories that are created 1172DIRMOD = 755 1173 1174### Permissions for all other files that are created 1175FILEMOD = 644 1176 1177# Where to copy the man and help files from 1178HELPSOURCE = ../runtime/doc 1179 1180# Where to copy the script files from (menu, bugreport) 1181SCRIPTSOURCE = ../runtime 1182 1183# Where to copy the colorscheme files from 1184COLSOURCE = ../runtime/colors 1185 1186# Where to copy the syntax files from 1187SYNSOURCE = ../runtime/syntax 1188 1189# Where to copy the indent files from 1190INDSOURCE = ../runtime/indent 1191 1192# Where to copy the standard plugin files from 1193AUTOSOURCE = ../runtime/autoload 1194 1195# Where to copy the standard plugin files from 1196PLUGSOURCE = ../runtime/plugin 1197 1198# Where to copy the ftplugin files from 1199FTPLUGSOURCE = ../runtime/ftplugin 1200 1201# Where to copy the macro files from 1202MACROSOURCE = ../runtime/macros 1203 1204# Where to copy the package files from 1205PACKSOURCE = ../runtime/pack 1206 1207# Where to copy the tools files from 1208TOOLSSOURCE = ../runtime/tools 1209 1210# Where to copy the tutor files from 1211TUTORSOURCE = ../runtime/tutor 1212 1213# Where to copy the spell files from 1214SPELLSOURCE = ../runtime/spell 1215 1216# Where to look for language specific files 1217LANGSOURCE = ../runtime/lang 1218 1219# Where to look for compiler files 1220COMPSOURCE = ../runtime/compiler 1221 1222# Where to look for keymap files 1223KMAPSOURCE = ../runtime/keymap 1224 1225# Where to look for print resource files 1226PRINTSOURCE = ../runtime/print 1227 1228# If you are using Linux, you might want to use this to make vim the 1229# default vi editor, it will create a link from vi to Vim when doing 1230# "make install". An existing file will be overwritten! 1231# When not using it, some make programs can't handle an undefined $(LINKIT). 1232#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1233LINKIT = @echo >/dev/null 1234 1235### 1236### GRAPHICAL USER INTERFACE (GUI). {{{1 1237### 'configure --enable-gui' can enable one of these for you if you did set 1238### a corresponding CONF_OPT_GUI above and have X11. 1239### Override configures choice by uncommenting all the following lines. 1240### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1241### for enabling the Athena or Motif GUI. 1242#GUI_SRC = $(NONE_SRC) 1243#GUI_OBJ = $(NONE_OBJ) 1244#GUI_DEFS = $(NONE_DEFS) 1245#GUI_IPATH = $(NONE_IPATH) 1246#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1247#GUI_LIBS1 = $(NONE_LIBS1) 1248#GUI_LIBS2 = $(NONE_LIBS2) 1249#GUI_INSTALL = $(NONE_INSTALL) 1250#GUI_TARGETS = $(NONE_TARGETS) 1251#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1252#GUI_TESTTARGET = $(NONE_TESTTARGET) 1253#GUI_BUNDLE = $(NONE_BUNDLE) 1254 1255# Without a GUI install the normal way. 1256NONE_INSTALL = install_normal 1257 1258### GTK GUI 1259GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c gui_gtk_f.c \ 1260 gui_beval.c $(GRESOURCE_SRC) 1261GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1262 objects/gui_gtk_f.o \ 1263 objects/gui_beval.o $(GRESOURCE_OBJ) 1264GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1265GTK_IPATH = $(GUI_INC_LOC) 1266GTK_LIBS_DIR = $(GUI_LIB_LOC) 1267GTK_LIBS1 = 1268GTK_LIBS2 = $(GTK_LIBNAME) 1269GTK_INSTALL = install_normal install_gui_extra 1270GTK_TARGETS = installglinks 1271GTK_MAN_TARGETS = yes 1272GTK_TESTTARGET = gui 1273GTK_BUNDLE = 1274 1275### Motif GUI 1276MOTIF_SRC = gui.c gui_motif.c gui_x11.c gui_beval.c \ 1277 gui_xmdlg.c gui_xmebw.c 1278MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1279 objects/gui_beval.o \ 1280 objects/gui_xmdlg.o objects/gui_xmebw.o 1281MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1282MOTIF_IPATH = $(GUI_INC_LOC) 1283MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1284MOTIF_LIBS1 = 1285MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1286MOTIF_INSTALL = install_normal install_gui_extra 1287MOTIF_TARGETS = installglinks 1288MOTIF_MAN_TARGETS = yes 1289MOTIF_TESTTARGET = gui 1290MOTIF_BUNDLE = 1291 1292### Athena GUI 1293### Use Xaw3d to make the menus look a little bit nicer 1294#XAW_LIB = -lXaw3d 1295XAW_LIB = -lXaw 1296 1297### When using Xaw3d, uncomment/comment the following lines to also get the 1298### scrollbars from Xaw3d. 1299#ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1300#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1301# objects/gui_beval.o objects/gui_at_fs.o 1302#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1303# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1304# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1305ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c \ 1306 gui_at_sb.c gui_at_fs.c 1307ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1308 objects/gui_beval.o \ 1309 objects/gui_at_sb.o objects/gui_at_fs.o 1310ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1311 1312ATHENA_IPATH = $(GUI_INC_LOC) 1313ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1314ATHENA_LIBS1 = $(XAW_LIB) 1315ATHENA_LIBS2 = -lXt 1316ATHENA_INSTALL = install_normal install_gui_extra 1317ATHENA_TARGETS = installglinks 1318ATHENA_MAN_TARGETS = yes 1319ATHENA_TESTTARGET = gui 1320ATHENA_BUNDLE = 1321 1322### neXtaw GUI 1323NEXTAW_LIB = -lneXtaw 1324 1325NEXTAW_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1326NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1327 objects/gui_beval.o objects/gui_at_fs.o 1328NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1329 1330NEXTAW_IPATH = $(GUI_INC_LOC) 1331NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1332NEXTAW_LIBS1 = $(NEXTAW_LIB) 1333NEXTAW_LIBS2 = -lXt 1334NEXTAW_INSTALL = install_normal install_gui_extra 1335NEXTAW_TARGETS = installglinks 1336NEXTAW_MAN_TARGETS = yes 1337NEXTAW_TESTTARGET = gui 1338NEXTAW_BUNDLE = 1339 1340### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1341# errors: ld: Undefined symbol 1342# _get_wmShellWidgetClass 1343# _get_applicationShellWidgetClass 1344# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1345# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1346#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1347# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1348# too: 1349#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1350 1351# PHOTON GUI 1352PHOTONGUI_SRC = gui.c gui_photon.c 1353PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o 1354PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1355PHOTONGUI_IPATH = 1356PHOTONGUI_LIBS_DIR = 1357PHOTONGUI_LIBS1 = -lph -lphexlib 1358PHOTONGUI_LIBS2 = 1359PHOTONGUI_INSTALL = install_normal install_gui_extra 1360PHOTONGUI_TARGETS = installglinks 1361PHOTONGUI_MAN_TARGETS = yes 1362PHOTONGUI_TESTTARGET = gui 1363PHOTONGUI_BUNDLE = 1364 1365# CARBON GUI 1366CARBONGUI_SRC = gui.c gui_mac.c 1367CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o 1368CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1369 -Wall -Wno-unknown-pragmas \ 1370 -mdynamic-no-pic -pipe 1371CARBONGUI_IPATH = -I. -Iproto 1372CARBONGUI_LIBS_DIR = 1373CARBONGUI_LIBS1 = -framework Carbon 1374CARBONGUI_LIBS2 = 1375CARBONGUI_INSTALL = install_macosx 1376CARBONGUI_TARGETS = 1377CARBONGUI_MAN_TARGETS = 1378CARBONGUI_TESTTARGET = gui 1379CARBONGUI_BUNDLE = gui_bundle 1380APPDIR = $(VIMNAME).app 1381CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1382 1383# All GUI files 1384ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c 1385ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1386 1387# }}} 1388 1389TERM_DEPS = \ 1390 libvterm/include/vterm.h \ 1391 libvterm/include/vterm_keycodes.h \ 1392 libvterm/src/rect.h \ 1393 libvterm/src/utf8.h \ 1394 libvterm/src/vterm_internal.h 1395 1396TERM_SRC = libvterm/src/*.c 1397 1398XDIFF_SRC = \ 1399 xdiff/xdiffi.c \ 1400 xdiff/xemit.c \ 1401 xdiff/xprepare.c \ 1402 xdiff/xutils.c \ 1403 xdiff/xhistogram.c \ 1404 xdiff/xpatience.c \ 1405 1406XDIFF_OBJS = \ 1407 objects/xdiffi.o \ 1408 objects/xemit.o \ 1409 objects/xprepare.o \ 1410 objects/xutils.o \ 1411 objects/xhistogram.o \ 1412 objects/xpatience.o \ 1413 1414XDIFF_INCL = \ 1415 xdiff/xdiff.h \ 1416 xdiff/xdiffi.h \ 1417 xdiff/xemit.h \ 1418 xdiff/xinclude.h \ 1419 xdiff/xmacros.h \ 1420 xdiff/xprepare.h \ 1421 xdiff/xtypes.h \ 1422 xdiff/xutils.h \ 1423 1424### Command to create dependencies based on #include "..." 1425### prototype headers are ignored due to -DPROTO, system 1426### headers #include <...> are ignored if we use the -MM option, as 1427### e.g. provided by gcc-cpp. 1428### Include FEAT_GUI to get dependency on gui.h 1429### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1430CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1431 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1432 1433# flags for cproto 1434# This is for cproto 3 patchlevel 8 or below 1435# __inline, __attribute__ and __extension__ are not recognized by cproto 1436# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1437#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1438# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1439# -D__extension__= -D__restrict="" \ 1440# -D__gnuc_va_list=char -D__builtin_va_list=char 1441 1442# 1443# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1444# __inline and __attribute__ are now recognized by cproto 1445# -D"foo()=" is not supported by all compilers so do not use it 1446NO_ATTR= 1447# 1448# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1449# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1450# 1451# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1452PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1453 1454 1455################################################ 1456## no changes required below this line ## 1457################################################ 1458 1459SHELL = /bin/sh 1460 1461# We would normally use "mkdir -p" but it doesn't work properly everywhere. 1462# Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" 1463# directory. Always use the install-sh script, it's slower but reliable. 1464MKDIR_P = $(SHELL) install-sh -c -d 1465 1466.SUFFIXES: 1467.SUFFIXES: .c .o .pro 1468 1469VTERM_CFLAGS = -Ilibvterm/include 1470 1471PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1472POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1473 1474ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CFLAGS) $(POST_DEFS) 1475 1476# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1477# with "-E". 1478OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1479 1480LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \ 1481 $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \ 1482 $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \ 1483 -Dinline= -D__extension__= -Dalloca=alloca 1484 1485LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1486 1487DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1488 1489# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1490# needed by racket. 1491ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1492ALL_LIBS = \ 1493 $(GUI_LIBS1) \ 1494 $(GUI_X_LIBS) \ 1495 $(GUI_LIBS2) \ 1496 $(X_PRE_LIBS) \ 1497 $(X_LIBS) \ 1498 $(X_EXTRA_LIBS) \ 1499 $(MZSCHEME_LIBS) \ 1500 $(LIBS) \ 1501 $(EXTRA_LIBS) \ 1502 $(LUA_LIBS) \ 1503 $(PERL_LIBS) \ 1504 $(PYTHON_LIBS) \ 1505 $(PYTHON3_LIBS) \ 1506 $(TCL_LIBS) \ 1507 $(RUBY_LIBS) \ 1508 $(PROFILE_LIBS) \ 1509 $(SANITIZER_LIBS) \ 1510 $(LEAK_LIBS) 1511 1512# abbreviations 1513DEST_BIN = $(DESTDIR)$(BINDIR) 1514DEST_VIM = $(DESTDIR)$(VIMLOC) 1515DEST_RT = $(DESTDIR)$(VIMRTLOC) 1516DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1517DEST_COL = $(DESTDIR)$(COLSUBLOC) 1518DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1519DEST_IND = $(DESTDIR)$(INDSUBLOC) 1520DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1521DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1522DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1523DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1524DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1525DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1526DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1527DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1528DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1529DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1530DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1531DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1532DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1533DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1534 1535# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1536# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1537# directory first. 1538# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1539DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1540DEST_MAN_DA = $(DEST_MAN_TOP)/da$(MAN1DIR) 1541DEST_MAN_DA_I = $(DEST_MAN_TOP)/da.ISO8859-1$(MAN1DIR) 1542DEST_MAN_DA_U = $(DEST_MAN_TOP)/da.UTF-8$(MAN1DIR) 1543DEST_MAN_DE = $(DEST_MAN_TOP)/de$(MAN1DIR) 1544DEST_MAN_DE_I = $(DEST_MAN_TOP)/de.ISO8859-1$(MAN1DIR) 1545DEST_MAN_DE_U = $(DEST_MAN_TOP)/de.UTF-8$(MAN1DIR) 1546DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1547DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1548DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1549DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1550DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1551DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1552DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1553DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1554DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1555DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1556DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1557DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1558 1559# stuff common to all systems 1560include Make_all.mak 1561 1562# get the list of tests 1563include testdir/Make_all.mak 1564 1565# BASIC_SRC: files that are always used 1566# GUI_SRC: extra GUI files for current configuration 1567# ALL_GUI_SRC: all GUI files for Unix 1568# 1569# SRC: files used for current configuration 1570# ALL_SRC: source files used for make depend and make lint 1571 1572BASIC_SRC = \ 1573 arabic.c \ 1574 autocmd.c \ 1575 beval.c \ 1576 blob.c \ 1577 blowfish.c \ 1578 buffer.c \ 1579 charset.c \ 1580 crypt.c \ 1581 crypt_zip.c \ 1582 debugger.c \ 1583 dict.c \ 1584 diff.c \ 1585 digraph.c \ 1586 edit.c \ 1587 eval.c \ 1588 evalfunc.c \ 1589 ex_cmds.c \ 1590 ex_cmds2.c \ 1591 ex_docmd.c \ 1592 ex_eval.c \ 1593 ex_getln.c \ 1594 fileio.c \ 1595 findfile.c \ 1596 fold.c \ 1597 getchar.c \ 1598 hardcopy.c \ 1599 hashtab.c \ 1600 if_cscope.c \ 1601 if_xcmdsrv.c \ 1602 indent.c \ 1603 insexpand.c \ 1604 json.c \ 1605 list.c \ 1606 main.c \ 1607 mark.c \ 1608 memfile.c \ 1609 memline.c \ 1610 menu.c \ 1611 message.c \ 1612 misc1.c \ 1613 misc2.c \ 1614 move.c \ 1615 mbyte.c \ 1616 normal.c \ 1617 ops.c \ 1618 option.c \ 1619 os_unix.c \ 1620 auto/pathdef.c \ 1621 popupmnu.c \ 1622 pty.c \ 1623 quickfix.c \ 1624 regexp.c \ 1625 screen.c \ 1626 search.c \ 1627 sha256.c \ 1628 sign.c \ 1629 spell.c \ 1630 spellfile.c \ 1631 syntax.c \ 1632 tag.c \ 1633 term.c \ 1634 terminal.c \ 1635 textprop.c \ 1636 ui.c \ 1637 undo.c \ 1638 usercmd.c \ 1639 userfunc.c \ 1640 version.c \ 1641 window.c \ 1642 $(OS_EXTRA_SRC) 1643 1644SRC = $(BASIC_SRC) \ 1645 $(GUI_SRC) \ 1646 $(TERM_SRC) \ 1647 $(XDIFF_SRC) \ 1648 $(HANGULIN_SRC) \ 1649 $(LUA_SRC) \ 1650 $(MZSCHEME_SRC) \ 1651 $(PERL_SRC) \ 1652 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1653 $(TCL_SRC) \ 1654 $(RUBY_SRC) 1655 1656EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1657 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1658 gui_beval.c netbeans.c channel.c \ 1659 $(GRESOURCE_SRC) 1660 1661# Unittest files 1662JSON_TEST_SRC = json_test.c 1663JSON_TEST_TARGET = json_test$(EXEEXT) 1664KWORD_TEST_SRC = kword_test.c 1665KWORD_TEST_TARGET = kword_test$(EXEEXT) 1666MEMFILE_TEST_SRC = memfile_test.c 1667MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1668MESSAGE_TEST_SRC = message_test.c 1669MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1670 1671UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1672UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1673RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1674 1675# All sources, also the ones that are not configured 1676ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) \ 1677 $(EXTRA_SRC) $(TERM_SRC) $(XDIFF_SRC) 1678 1679# Which files to check with lint. Select one of these three lines. ALL_SRC 1680# checks more, but may not work well for checking a GUI that wasn't configured. 1681# The perl sources also don't work well with lint. 1682LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1683 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1684 $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) 1685#LINT_SRC = $(SRC) 1686#LINT_SRC = $(ALL_SRC) 1687#LINT_SRC = $(BASIC_SRC) 1688 1689OBJ_COMMON = \ 1690 objects/arabic.o \ 1691 objects/autocmd.o \ 1692 objects/beval.o \ 1693 objects/buffer.o \ 1694 objects/blob.o \ 1695 objects/blowfish.o \ 1696 objects/crypt.o \ 1697 objects/crypt_zip.o \ 1698 objects/debugger.o \ 1699 objects/dict.o \ 1700 objects/diff.o \ 1701 objects/digraph.o \ 1702 objects/edit.o \ 1703 objects/eval.o \ 1704 objects/evalfunc.o \ 1705 objects/ex_cmds.o \ 1706 objects/ex_cmds2.o \ 1707 objects/ex_docmd.o \ 1708 objects/ex_eval.o \ 1709 objects/ex_getln.o \ 1710 objects/fileio.o \ 1711 objects/findfile.o \ 1712 objects/fold.o \ 1713 objects/getchar.o \ 1714 objects/hardcopy.o \ 1715 objects/hashtab.o \ 1716 $(HANGULIN_OBJ) \ 1717 objects/if_cscope.o \ 1718 objects/if_xcmdsrv.o \ 1719 objects/indent.o \ 1720 objects/insexpand.o \ 1721 objects/list.o \ 1722 objects/mark.o \ 1723 objects/memline.o \ 1724 objects/menu.o \ 1725 objects/misc1.o \ 1726 objects/misc2.o \ 1727 objects/move.o \ 1728 objects/mbyte.o \ 1729 objects/normal.o \ 1730 objects/ops.o \ 1731 objects/option.o \ 1732 objects/os_unix.o \ 1733 objects/pathdef.o \ 1734 objects/popupmnu.o \ 1735 objects/pty.o \ 1736 objects/quickfix.o \ 1737 objects/regexp.o \ 1738 objects/screen.o \ 1739 objects/search.o \ 1740 objects/sha256.o \ 1741 objects/sign.o \ 1742 objects/spell.o \ 1743 objects/spellfile.o \ 1744 objects/syntax.o \ 1745 objects/tag.o \ 1746 objects/term.o \ 1747 objects/terminal.o \ 1748 objects/textprop.o \ 1749 objects/ui.o \ 1750 objects/undo.o \ 1751 objects/usercmd.o \ 1752 objects/userfunc.o \ 1753 objects/version.o \ 1754 objects/window.o \ 1755 $(GUI_OBJ) \ 1756 $(TERM_OBJ) \ 1757 $(LUA_OBJ) \ 1758 $(MZSCHEME_OBJ) \ 1759 $(PERL_OBJ) \ 1760 $(PYTHON_OBJ) \ 1761 $(PYTHON3_OBJ) \ 1762 $(TCL_OBJ) \ 1763 $(RUBY_OBJ) \ 1764 $(OS_EXTRA_OBJ) \ 1765 $(NETBEANS_OBJ) \ 1766 $(CHANNEL_OBJ) \ 1767 $(XDIFF_OBJS) 1768 1769# The files included by tests are not in OBJ_COMMON. 1770OBJ_MAIN = \ 1771 objects/charset.o \ 1772 objects/json.o \ 1773 objects/main.o \ 1774 objects/memfile.o \ 1775 objects/message.o 1776 1777OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1778 1779OBJ_JSON_TEST = \ 1780 objects/charset.o \ 1781 objects/memfile.o \ 1782 objects/message.o \ 1783 objects/json_test.o 1784 1785JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1786 1787OBJ_KWORD_TEST = \ 1788 objects/json.o \ 1789 objects/memfile.o \ 1790 objects/message.o \ 1791 objects/kword_test.o 1792 1793KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1794 1795OBJ_MEMFILE_TEST = \ 1796 objects/charset.o \ 1797 objects/json.o \ 1798 objects/message.o \ 1799 objects/memfile_test.o 1800 1801MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1802 1803OBJ_MESSAGE_TEST = \ 1804 objects/charset.o \ 1805 objects/json.o \ 1806 objects/memfile.o \ 1807 objects/message_test.o 1808 1809MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1810 1811ALL_OBJ = $(OBJ_COMMON) \ 1812 $(OBJ_MAIN) \ 1813 $(OBJ_JSON_TEST) \ 1814 $(OBJ_KWORD_TEST) \ 1815 $(OBJ_MEMFILE_TEST) \ 1816 $(OBJ_MESSAGE_TEST) 1817 1818 1819PRO_AUTO = \ 1820 arabic.pro \ 1821 autocmd.pro \ 1822 blowfish.pro \ 1823 buffer.pro \ 1824 charset.pro \ 1825 crypt.pro \ 1826 crypt_zip.pro \ 1827 debugger.pro \ 1828 dict.pro \ 1829 diff.pro \ 1830 digraph.pro \ 1831 edit.pro \ 1832 eval.pro \ 1833 evalfunc.pro \ 1834 ex_cmds.pro \ 1835 ex_cmds2.pro \ 1836 ex_docmd.pro \ 1837 ex_eval.pro \ 1838 ex_getln.pro \ 1839 fileio.pro \ 1840 findfile.pro \ 1841 fold.pro \ 1842 getchar.pro \ 1843 hardcopy.pro \ 1844 hashtab.pro \ 1845 hangulin.pro \ 1846 if_cscope.pro \ 1847 if_lua.pro \ 1848 if_mzsch.pro \ 1849 if_python.pro \ 1850 if_python3.pro \ 1851 if_ruby.pro \ 1852 if_xcmdsrv.pro \ 1853 indent.pro \ 1854 insexpand.pro \ 1855 json.pro \ 1856 list.pro \ 1857 main.pro \ 1858 mark.pro \ 1859 mbyte.pro \ 1860 memfile.pro \ 1861 memline.pro \ 1862 menu.pro \ 1863 message.pro \ 1864 misc1.pro \ 1865 misc2.pro \ 1866 move.pro \ 1867 normal.pro \ 1868 ops.pro \ 1869 option.pro \ 1870 os_mac_conv.pro \ 1871 os_unix.pro \ 1872 popupmnu.pro \ 1873 pty.pro \ 1874 quickfix.pro \ 1875 regexp.pro \ 1876 screen.pro \ 1877 search.pro \ 1878 sha256.pro \ 1879 sign.pro \ 1880 spell.pro \ 1881 spellfile.pro \ 1882 syntax.pro \ 1883 tag.pro \ 1884 term.pro \ 1885 terminal.pro \ 1886 termlib.pro \ 1887 textprop.pro \ 1888 ui.pro \ 1889 undo.pro \ 1890 usercmd.pro \ 1891 userfunc.pro \ 1892 version.pro \ 1893 window.pro \ 1894 beval.pro \ 1895 gui_beval.pro \ 1896 netbeans.pro \ 1897 channel.pro \ 1898 $(ALL_GUI_PRO) \ 1899 $(TCL_PRO) 1900 1901# Resources used for the Mac are in one directory. 1902RSRC_DIR = os_mac_rsrc 1903 1904PRO_MANUAL = os_amiga.pro os_win32.pro \ 1905 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1906 1907# Default target is making the executable and tools 1908all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1909 1910tools: $(TOOLS) 1911 1912# Run configure with all the setting from above. 1913# 1914# Note: auto/config.h doesn't depend on configure, because running configure 1915# doesn't always update auto/config.h. The timestamp isn't changed if the 1916# file contents didn't change (to avoid recompiling everything). Including a 1917# dependency on auto/config.h would cause running configure each time when 1918# auto/config.h isn't updated. The dependency on auto/config.mk should make 1919# sure configure is run when it's needed. 1920# 1921# Remove the config.cache every time, once in a while it causes problems that 1922# are very hard to figure out. 1923# 1924config auto/config.mk: auto/configure config.mk.in config.h.in 1925 -rm -f auto/config.cache 1926 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1927 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1928 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1929 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1930 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1931 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1932 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1933 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1934 $(CONF_OPT_AUTOSERVE) $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1935 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1936 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1937 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1938 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) \ 1939 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1940 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1941 $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ 1942 $(CONF_ARGS) $(CONF_ARGS1) $(CONF_ARGS2) $(CONF_ARGS3) \ 1943 $(CONF_ARGS4) $(CONF_ARGS5) $(CONF_ARGS6) \ 1944 $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1945 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1946 $(CONF_OPT_SYSMOUSE); \ 1947 fi 1948 1949# Use "make reconfig" to rerun configure without cached values. 1950# When config.h changes, most things will be recompiled automatically. 1951# Invoke $(MAKE) to run config with the empty auto/config.mk. 1952# Invoke $(MAKE) to build all with the filled auto/config.mk. 1953reconfig: scratch clean 1954 $(MAKE) -f Makefile config 1955 $(MAKE) -f Makefile all 1956 1957# Run autoconf to produce auto/configure. 1958# Note: 1959# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1960# producing auto/configure. 1961# - autoconf is not run automatically, because a patch usually changes both 1962# configure.ac and auto/configure but can't update the timestamps. People 1963# who do not have (the correct version of) autoconf would run into trouble. 1964# 1965# Two tricks are required to make autoconf put its output in the "auto" dir: 1966# - Temporarily move the ./configure script to ./configure.save. Don't 1967# overwrite it, it's probably the result of an aborted autoconf. 1968# - Use sed to change ./config.log to auto/config.log in the configure script. 1969# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1970# care of: 1971# - configure.lineno: has the line numbers replaced with $LINENO. That 1972# improves patches a LOT, thus use it instead (until someone says it doesn't 1973# work on some system). 1974# - autom4te.cache directory is created and not cleaned up. Delete it. 1975# - Uses ">config.log" instead of "./config.log". 1976autoconf: 1977 if test ! -f configure.save; then mv configure configure.save; fi 1978 $(AUTOCONF) 1979 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1980 chmod 755 auto/configure 1981 mv -f configure.save configure 1982 -rm -rf autom4te.cache 1983 -rm -f auto/config.status auto/config.cache 1984 1985# Run vim script to generate the Ex command lookup table. 1986# This only needs to be run when a command name has been added or changed. 1987# If this fails because you don't have Vim yet, first build and install Vim 1988# without changes. 1989cmdidxs: ex_cmds.h 1990 vim --clean -X -u create_cmdidxs.vim 1991 1992 1993# The normal command to compile a .c file to its .o file. 1994# Without or with ALL_CFLAGS. 1995CCC_NF = $(CC) -c -I$(srcdir) 1996CCC = $(CCC_NF) $(ALL_CFLAGS) 1997 1998 1999# Link the target for normal use or debugging. 2000# A shell script is used to try linking without unnecessary libraries. 2001$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 2002 $(CCC) version.c -o objects/version.o 2003 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2004 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 2005 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2006 sh $(srcdir)/link.sh 2007 2008xxd/xxd$(EXEEXT): xxd/xxd.c 2009 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 2010 $(MAKE) -f Makefile 2011 2012# Build the language specific files if they were unpacked. 2013# Generate the converted .mo files separately, it's no problem if this fails. 2014languages: 2015 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2016 cd $(PODIR); \ 2017 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 2018 fi 2019 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2020 cd $(PODIR); \ 2021 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 2022 fi 2023 2024# Update the *.po files for changes in the sources. Only run manually. 2025update-po: 2026 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 2027 2028# Generate function prototypes. This is not needed to compile vim, but if 2029# you want to use it, cproto is out there on the net somewhere -- Webb 2030# 2031# When generating os_amiga.pro and os_win32.pro there will be a 2032# few include files that can not be found, that's OK. 2033 2034proto: $(PRO_AUTO) $(PRO_MANUAL) 2035 2036# Filter out arguments that cproto doesn't support. 2037# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 2038# them as a list of individual flags. 2039# The -E"gcc -E" argument must be separate to avoid problems with shell 2040# quoting. 2041# Strip -O2, it may cause cproto to write stderr to the file "2". 2042CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 2043 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g' -e 's/ -O[^ ]\+//g'` 2044 2045### Would be nice if this would work for "normal" make. 2046### Currently it only works for (Free)BSD make. 2047#$(PRO_AUTO): $$(*F).c 2048# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 2049 2050# Always define FEAT_GUI. This may generate a few warnings if it's also 2051# defined in auto/config.h, you can ignore that. 2052.c.pro: 2053 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2054 echo "/* vim: set ft=c : */" >> proto/$@ 2055 2056os_amiga.pro: os_amiga.c 2057 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 2058 echo "/* vim: set ft=c : */" >> proto/$@ 2059 2060os_win32.pro: os_win32.c 2061 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2062 echo "/* vim: set ft=c : */" >> proto/$@ 2063 2064os_mswin.pro: os_mswin.c 2065 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2066 echo "/* vim: set ft=c : */" >> proto/$@ 2067 2068winclip.pro: winclip.c 2069 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2070 echo "/* vim: set ft=c : */" >> proto/$@ 2071 2072os_beos.pro: os_beos.c 2073 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 2074 echo "/* vim: set ft=c : */" >> proto/$@ 2075 2076os_vms.pro: os_vms.c 2077# must use os_vms_conf.h for auto/config.h 2078 mv auto/config.h auto/config.h.save 2079 cp os_vms_conf.h auto/config.h 2080 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 2081 echo "/* vim: set ft=c : */" >> proto/$@ 2082 rm auto/config.h 2083 mv auto/config.h.save auto/config.h 2084 2085# if_perl.pro is special: Use the generated if_perl.c for input and remove 2086# prototypes for local functions. 2087if_perl.pro: auto/if_perl.c 2088 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 2089 2090gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2091 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2092 echo "/* vim: set ft=c : */" >> proto/$@ 2093 2094notags: 2095 -rm -f tags 2096 2097# Note: tags is made for the currently configured version, can't include both 2098# Motif and Athena GUI 2099# You can ignore error messages for missing files. 2100tags TAGS: notags 2101 $(TAGPRG) $(TAGS_FILES) 2102 2103# Make a highlight file for types. Requires Exuberant ctags and awk 2104types: types.vim 2105types.vim: $(TAGS_FILES) 2106 ctags --c-kinds=gstu -o- $(TAGS_FILES) |\ 2107 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2108 {printf("%s ", $$1)}END{print ""}' > $@ 2109 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2110 2111# TESTING 2112# 2113# Execute the test scripts and the unittests. 2114test check: scripttests unittests test_libvterm 2115 2116# Execute the test scripts. Run these after compiling Vim, before installing. 2117# This doesn't depend on $(VIMTARGET), because that won't work when configure 2118# wasn't run yet. Restart make to build it instead. 2119# 2120# This will produce a lot of garbage on your screen, including a few error 2121# messages. Don't worry about that. 2122# If there is a real error, there will be a difference between "testXX.out" and 2123# a "testXX.ok" file. 2124# If everything is alright, the final message will be "ALL DONE". If not you 2125# get "TEST FAILURE". 2126# 2127scripttests: 2128 $(MAKE) -f Makefile $(VIMTARGET) 2129 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2130 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2131 fi 2132 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2133 ln -s $(VIMTARGET) vim; \ 2134 fi 2135 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2136 2137# Run the tests with the GUI. Assumes vim/gvim was already built 2138testgui: 2139 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2140 2141benchmark: 2142 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2143 2144unittesttargets: 2145 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2146 2147# Swap these lines to run individual tests with gvim instead of vim. 2148VIMTESTTARGET = $(VIMTARGET) 2149# VIMTESTTARGET = $(GVIMTARGET) 2150 2151# Execute the unittests one by one. 2152unittest unittests: $(RUN_UNITTESTS) 2153 2154run_json_test: $(JSON_TEST_TARGET) 2155 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2156 2157run_kword_test: $(KWORD_TEST_TARGET) 2158 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2159 2160run_memfile_test: $(MEMFILE_TEST_TARGET) 2161 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2162 2163run_message_test: $(MESSAGE_TEST_TARGET) 2164 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2165 2166# Run the libvterm tests. 2167# This currently doesn't work on Mac, only run on Linux for now. 2168test_libvterm: 2169 @if test `uname` = "Linux"; then \ 2170 cd libvterm; $(MAKE) -f Makefile test \ 2171 CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"; \ 2172 fi 2173 2174# Run individual OLD style test. 2175# These do not depend on the executable, compile it when needed. 2176test1 \ 2177 test_eval \ 2178 test3 \ 2179 test29 test30 test37 test39 \ 2180 test42 test44 test48 test49 \ 2181 test52 test59 \ 2182 test64 test69 \ 2183 test70 test72 \ 2184 test86 test87 test88 \ 2185 test94 test95 test99: 2186 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2187 2188# Run individual NEW style test. 2189# These do not depend on the executable, compile it when needed. 2190$(NEW_TESTS): 2191 cd testdir; $(MAKE) $@ VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2192 2193newtests: 2194 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2195 @if test -f testdir/test.log; then \ 2196 cat testdir/test.log; \ 2197 fi 2198 cat testdir/messages 2199 2200testclean: 2201 cd testdir; $(MAKE) -f Makefile clean 2202 if test -d $(PODIR); then \ 2203 cd $(PODIR); $(MAKE) checkclean; \ 2204 fi 2205 2206# Unittests 2207# It's build just like Vim to satisfy all dependencies. 2208$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2209 $(CCC) version.c -o objects/version.o 2210 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2211 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2212 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2213 sh $(srcdir)/link.sh 2214 2215$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2216 $(CCC) version.c -o objects/version.o 2217 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2218 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2219 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2220 sh $(srcdir)/link.sh 2221 2222$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2223 $(CCC) version.c -o objects/version.o 2224 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2225 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2226 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2227 sh $(srcdir)/link.sh 2228 2229$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2230 $(CCC) version.c -o objects/version.o 2231 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2232 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2233 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2234 sh $(srcdir)/link.sh 2235 2236# install targets 2237 2238install: $(GUI_INSTALL) 2239 2240install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2241 2242install_gui_extra: installgtutorbin 2243 2244installvim: installvimbin installtutorbin \ 2245 installruntime installlinks installmanlinks 2246 2247# 2248# Avoid overwriting an existing executable, somebody might be running it and 2249# overwriting it could cause it to crash. Deleting it is OK, it won't be 2250# really deleted until all running processes for it have exited. It is 2251# renamed first, in case the deleting doesn't work. 2252# 2253# If you want to keep an older version, rename it before running "make 2254# install". 2255# 2256installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2257 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2258 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2259 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2260 fi 2261 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2262 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2263 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2264# may create a link to the new executable from /usr/bin/vi 2265 -$(LINKIT) 2266 2267# Long list of arguments for the shell script that installs the manual pages 2268# for one language. 2269INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2270 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2271 2272# Install most of the runtime files 2273installruntime: installrtbase installmacros installpack installtutor installspell 2274 2275# install the help files; first adjust the contents for the final location 2276installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2277 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2278 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml \ 2279 $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2280 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2281# Generate the help tags with ":helptags" to handle all languages. 2282# Move the distributed tags file aside and restore it, to avoid it being 2283# different from the repository. 2284 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2285 mv -f tags tags.dist; fi 2286 @echo generating help tags 2287 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2288 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2289 cd $(HELPSOURCE); \ 2290 files=`ls *.txt tags`; \ 2291 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2292 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2293 cd $(DEST_HELP); \ 2294 chmod $(HELPMOD) $$files 2295 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2296 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2297 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2298# install the menu files 2299 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2300 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2301 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2302 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2303 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2304 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2305# install the defaults/evim/mswin file 2306 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2307 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2308 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2309 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2310 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2311 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2312# install the rgb.txt file 2313 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2314 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2315# install the bugreport file 2316 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2317 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2318# install the example vimrc files 2319 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2320 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2321 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2322 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2323# install the file type detection files 2324 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2325 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2326 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2327 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2328 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2329 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2330 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2331 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2332 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2333 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2334 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2335 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2336 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2337 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2338 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2339 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2340# install the print resource files 2341 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2342 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2343# install the colorscheme files 2344 cd $(COLSOURCE); $(INSTALL_DATA_R) *.vim tools README.txt $(DEST_COL) 2345 cd $(DEST_COL); chmod $(DIRMOD) tools 2346 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt tools/*.vim 2347# install the syntax files 2348 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2349 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2350# install the indent files 2351 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2352 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2353# install the standard autoload files 2354 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2355 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2356 cd $(AUTOSOURCE)/dist; $(INSTALL_DATA) *.vim $(DEST_AUTO)/dist 2357 cd $(DEST_AUTO)/dist; chmod $(HELPMOD) *.vim 2358 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2359 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2360# install the standard plugin files 2361 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2362 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2363# install the ftplugin files 2364 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2365 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2366# install the compiler files 2367 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2368 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2369 2370installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2371 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2372 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2373 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2374 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2375# When using CVS some CVS directories might have been copied. 2376# Also delete AAPDIR and *.info files. 2377 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2378 if test -n "$$cvs"; then \ 2379 rm -rf $$cvs; \ 2380 fi 2381 2382installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2383 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2384 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2385 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2386 2387# install the tutor files 2388installtutorbin: $(DEST_VIM) 2389 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2390 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2391 2392installgtutorbin: $(DEST_VIM) 2393 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2394 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2395 2396installtutor: $(DEST_RT) $(DEST_TUTOR) 2397 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2398 -rm -f $(DEST_TUTOR)/*.info 2399 chmod $(HELPMOD) $(DEST_TUTOR)/* 2400 2401# Install the spell files, if they exist. This assumes at least the English 2402# spell file is there. 2403installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2404 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2405 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2406 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2407 fi 2408 2409# install helper program xxd 2410installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2411 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2412 $(INSTALL_TOOL_LANGS) 2413 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2414 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2415 rm -f $(DEST_BIN)/xxd.rm; \ 2416 fi 2417 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2418 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2419 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2420 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2421 2422# install the runtime tools 2423 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2424# When using CVS some CVS directories might have been copied. 2425 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2426 if test -n "$$cvs"; then \ 2427 rm -rf $$cvs; \ 2428 fi 2429 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2430# replace the path in some tools 2431 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2432 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2433 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2434 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2435 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2436 2437# install the language specific files for tools, if they were unpacked 2438install-tool-languages: 2439 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2440 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2441 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2442 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2443 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2444 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2445 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2446 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2447 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2448 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2449 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2450 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2451 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2452 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2453 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2454 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2455 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2456 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2457 2458# install the language specific files, if they were unpacked 2459install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2460 -$(SHELL) ./installman.sh install $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2461 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2462 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2463 -$(SHELL) ./installman.sh install $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2464 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2465 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2466 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2467 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2468 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2469 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2470 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2471 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2472 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2473 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2474 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2475 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2476 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2477 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2478 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2479 $(DEST_MAN_DA) $(INSTALLMLARGS) 2480 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2481 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2482 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2483 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2484 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2485 $(DEST_MAN_DE) $(INSTALLMLARGS) 2486 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2487 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2488 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2489 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2490 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2491 $(DEST_MAN_FR) $(INSTALLMLARGS) 2492 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2493 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2494 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2495 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2496 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2497 $(DEST_MAN_IT) $(INSTALLMLARGS) 2498 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2499 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2500 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2501 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2502 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2503 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2504 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2505 $(DEST_MAN_PL) $(INSTALLMLARGS) 2506 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2507 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2508 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2509 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2510 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2511 $(DEST_MAN_RU) $(INSTALLMLARGS) 2512 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2513 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2514 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2515 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2516 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2517 fi 2518 if test -d $(LANGSOURCE); then \ 2519 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2520 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2521 fi 2522 if test -d $(KMAPSOURCE); then \ 2523 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2524 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2525 fi 2526 2527# Install the icons for KDE, if the directory exists and the icon doesn't. 2528# Always when $(DESTDIR) is not empty. 2529ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2530ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2531ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2532ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2533DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2534KDEPATH = $(HOME)/.kde/share/icons 2535install-icons: 2536 if test -n "$(DESTDIR)"; then \ 2537 $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ 2538 $(ICON16PATH) $(DESKTOPPATH); \ 2539 fi 2540 2541 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2542 -a ! -f $(ICON48PATH)/gvim.png; then \ 2543 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2544 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2545 -a -w $(ICONTHEMEPATH) \ 2546 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2547 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2548 fi \ 2549 fi 2550 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2551 -a ! -f $(ICON32PATH)/gvim.png; then \ 2552 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2553 fi 2554 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2555 -a ! -f $(ICON16PATH)/gvim.png; then \ 2556 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2557 fi 2558 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2559 if test -f po/vim.desktop -a -f po/gvim.desktop; then \ 2560 $(INSTALL_DATA) po/vim.desktop po/gvim.desktop \ 2561 $(DESKTOPPATH); \ 2562 else \ 2563 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2564 $(SCRIPTSOURCE)/gvim.desktop \ 2565 $(DESKTOPPATH); \ 2566 fi; \ 2567 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2568 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2569 fi \ 2570 fi 2571 2572$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2573 @echo Runtime files not found. 2574 @echo You need to unpack the runtime archive before running "make install". 2575 test -f error 2576 2577$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2578 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2579 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2580 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2581 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2582 $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_PLUG): 2583 $(MKDIR_P) $@ 2584 -chmod $(DIRMOD) $@ 2585 2586# create links from various names to vim. This is only done when the links 2587# (or executables with the same name) don't exist yet. 2588installlinks: $(GUI_TARGETS) \ 2589 $(DEST_BIN)/$(EXTARGET) \ 2590 $(DEST_BIN)/$(VIEWTARGET) \ 2591 $(DEST_BIN)/$(RVIMTARGET) \ 2592 $(DEST_BIN)/$(RVIEWTARGET) \ 2593 $(INSTALLVIMDIFF) 2594 2595installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2596 $(DEST_BIN)/$(GVIEWTARGET) \ 2597 $(DEST_BIN)/$(RGVIMTARGET) \ 2598 $(DEST_BIN)/$(RGVIEWTARGET) \ 2599 $(DEST_BIN)/$(EVIMTARGET) \ 2600 $(DEST_BIN)/$(EVIEWTARGET) \ 2601 $(INSTALLGVIMDIFF) 2602 2603installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2604installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2605 2606$(DEST_BIN)/$(EXTARGET): 2607 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2608 2609$(DEST_BIN)/$(VIEWTARGET): 2610 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2611 2612$(DEST_BIN)/$(GVIMTARGET): 2613 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2614 2615$(DEST_BIN)/$(GVIEWTARGET): 2616 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2617 2618$(DEST_BIN)/$(RVIMTARGET): 2619 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2620 2621$(DEST_BIN)/$(RVIEWTARGET): 2622 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2623 2624$(DEST_BIN)/$(RGVIMTARGET): 2625 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2626 2627$(DEST_BIN)/$(RGVIEWTARGET): 2628 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2629 2630$(DEST_BIN)/$(VIMDIFFTARGET): 2631 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2632 2633$(DEST_BIN)/$(GVIMDIFFTARGET): 2634 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2635 2636$(DEST_BIN)/$(EVIMTARGET): 2637 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2638 2639$(DEST_BIN)/$(EVIEWTARGET): 2640 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2641 2642# Create links for the manual pages with various names to vim. This is only 2643# done when the links (or manpages with the same name) don't exist yet. 2644 2645INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2646 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2647 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2648 $(GVIMDIFFNAME) $(EVIEWNAME) 2649 2650installmanlinks: 2651 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2652 $(DEST_MAN) $(INSTALLMLARGS) 2653 2654uninstall: uninstall_runtime 2655 -rm -f $(DEST_BIN)/$(VIMTARGET) 2656 -rm -f $(DEST_BIN)/vimtutor 2657 -rm -f $(DEST_BIN)/gvimtutor 2658 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2659 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2660 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2661 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2662 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2663 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2664 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2665 2666# Note: the "rmdir" will fail if any files were added after "make install" 2667uninstall_runtime: 2668 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2669 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA) "" $(INSTALLMANARGS) 2670 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_I) "" $(INSTALLMANARGS) 2671 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_U) "" $(INSTALLMANARGS) 2672 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE) "" $(INSTALLMANARGS) 2673 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_I) "" $(INSTALLMANARGS) 2674 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_U) "" $(INSTALLMANARGS) 2675 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2676 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2677 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2678 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2679 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2680 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2681 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2682 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2683 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2684 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2685 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2686 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2687 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2688 $(DEST_MAN) $(INSTALLMLARGS) 2689 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2690 $(DEST_MAN_DA) $(INSTALLMLARGS) 2691 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2692 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2693 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2694 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2695 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2696 $(DEST_MAN_DE) $(INSTALLMLARGS) 2697 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2698 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2699 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2700 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2701 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2702 $(DEST_MAN_FR) $(INSTALLMLARGS) 2703 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2704 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2705 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2706 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2707 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2708 $(DEST_MAN_IT) $(INSTALLMLARGS) 2709 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2710 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2711 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2712 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2713 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2714 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2715 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2716 $(DEST_MAN_PL) $(INSTALLMLARGS) 2717 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2718 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2719 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2720 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2721 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2722 $(DEST_MAN_RU) $(INSTALLMLARGS) 2723 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2724 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2725 -rm -f $(DEST_MAN)/xxd.1 2726 -rm -f $(DEST_MAN_DA)/xxd.1 $(DEST_MAN_DA_I)/xxd.1 $(DEST_MAN_DA_U)/xxd.1 2727 -rm -f $(DEST_MAN_DE)/xxd.1 $(DEST_MAN_DE_I)/xxd.1 $(DEST_MAN_DE_U)/xxd.1 2728 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2729 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2730 -rm -f $(DEST_MAN_JA_U)/xxd.1 2731 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2732 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2733 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2734 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2735 -rm -f $(SYS_RGB_FILE) 2736 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2737 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2738 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2739 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2740 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2741 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2742 -rm -f $(SYS_OPTWIN_FILE) 2743 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2744 -rm -rf $(DEST_COL)/tools 2745 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2746 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2747 -rm -rf $(DEST_MACRO) 2748 -rm -rf $(DEST_PACK) 2749 -rm -rf $(DEST_TUTOR) 2750 -rm -rf $(DEST_SPELL) 2751 -rm -rf $(DEST_TOOLS) 2752 -rm -rf $(DEST_LANG) 2753 -rm -rf $(DEST_KMAP) 2754 -rm -rf $(DEST_COMP) 2755 -rm -f $(DEST_PRINT)/*.ps 2756 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2757 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2758 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2759 -rm -f $(DEST_AUTO)/dist/*.vim $(DEST_AUTO)/xml/*.vim 2760 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2761 -rmdir $(DEST_FTP) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_AUTO) 2762 -rmdir $(DEST_PLUG) $(DEST_RT) 2763# This will fail when other Vim versions are installed, no worries. 2764 -rmdir $(DEST_VIM) 2765 2766# Clean up all the files that have been produced, except configure's. 2767# We support common typing mistakes for Juergen! :-) 2768clean celan: testclean 2769 -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2770 -rm -rf objects 2771 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2772 -rm -f conftest* *~ auto/link.sed 2773 -rm -f testdir/opt_test.vim 2774 -rm -f $(UNITTEST_TARGETS) 2775 -rm -f runtime pixmaps 2776 -rm -rf $(APPDIR) 2777 -rm -rf mzscheme_base.c 2778 if test -d $(PODIR); then \ 2779 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2780 fi 2781 2782# Make a shadow directory for compilation on another system or with different 2783# features. 2784SHADOWDIR = shadow 2785 2786shadow: runtime pixmaps 2787 $(MKDIR_P) $(SHADOWDIR) 2788 cd $(SHADOWDIR); ln -s ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../libvterm ../vimtutor ../gvimtutor ../install-sh ../Make_all.mak . 2789 mkdir $(SHADOWDIR)/auto 2790 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2791 $(MKDIR_P) $(SHADOWDIR)/po 2792 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/*.in ../../po/Makefile ../../po/*.c . 2793 cd $(SHADOWDIR); rm -f auto/link.sed 2794 cp Makefile configure $(SHADOWDIR) 2795 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2796 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2797 cp config.mk.dist $(SHADOWDIR) 2798 $(MKDIR_P) $(SHADOWDIR)/xxd 2799 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2800 $(MKDIR_P) $(SHADOWDIR)/xdiff 2801 cd $(SHADOWDIR)/xdiff; ln -s ../../xdiff/*.[ch] . 2802 if test -d $(RSRC_DIR); then \ 2803 cd $(SHADOWDIR); \ 2804 ln -s ../infplist.xml .; \ 2805 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2806 fi 2807 $(MKDIR_P) $(SHADOWDIR)/testdir 2808 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2809 ../../testdir/Make_all.mak \ 2810 ../../testdir/README.txt \ 2811 ../../testdir/*.in \ 2812 ../../testdir/*.vim \ 2813 ../../testdir/*.py \ 2814 ../../testdir/python* \ 2815 ../../testdir/pyxfile \ 2816 ../../testdir/sautest \ 2817 ../../testdir/samples \ 2818 ../../testdir/dumps \ 2819 ../../testdir/test83-tags? \ 2820 ../../testdir/*.ok . 2821 2822# Link needed for doing "make install" in a shadow directory. 2823runtime: 2824 -ln -s ../runtime . 2825 2826# Link needed for doing "make" using GTK in a shadow directory. 2827pixmaps: 2828 -ln -s ../pixmaps . 2829 2830# Update the synmenu.vim file with the latest Syntax menu. 2831# This is only needed when runtime/makemenu.vim was changed. 2832menu: ./vim ../runtime/makemenu.vim 2833 ./vim -u ../runtime/makemenu.vim 2834 2835# Start configure from scratch 2836scrub scratch: 2837 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2838 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2839 touch auto/config.h 2840 cp config.mk.dist auto/config.mk 2841 2842distclean: clean scratch 2843 -rm -f tags 2844 2845dist: distclean 2846 @echo 2847 @echo Making the distribution has to be done in the top directory 2848 2849mdepend: 2850 -@rm -f Makefile~ 2851 cp Makefile Makefile~ 2852 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2853 @for i in $(ALL_SRC) ; do \ 2854 echo "$$i" ; \ 2855 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2856 $(CPP) $$i |\ 2857 grep '^# .*"\./.*\.h"' |\ 2858 sort -t'"' -u +1 -2 |\ 2859 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2860 ` >> tmp_make ; \ 2861 done 2862 mv tmp_make Makefile 2863 2864depend: 2865 -@rm -f Makefile~ 2866 cp Makefile Makefile~ 2867 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2868 -for i in $(ALL_SRC); do echo $$i; \ 2869 $(CPP_DEPEND) $$i | \ 2870 sed -e 's+^\([^ ]*\.o\)+objects/\1+' -e 's+xdiff/\.\./++g' >> tmp_make; done 2871 mv tmp_make Makefile 2872 2873# Run lint. Clean up the *.ln files that are sometimes left behind. 2874lint: 2875 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2876 -rm -f *.ln 2877 2878# Check dosinst.c with lint. 2879lintinstall: 2880 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2881 -rm -f dosinst.ln 2882 2883########################################################################### 2884 2885.c.o: 2886 $(CCC) $< 2887 2888auto/if_perl.c: if_perl.xs 2889 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2890 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2891 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2892 2893auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2894 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2895 2896auto/pathdef.c: Makefile auto/config.mk 2897 -@echo creating $@ 2898 -@echo '/* pathdef.c */' > $@ 2899 -@echo '/* This file is automatically created by Makefile' >> $@ 2900 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2901 -@echo '#include "vim.h"' >> $@ 2902 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2903 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2904 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2905 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2906 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2907 -@if test -n "$(COMPILEDBY)"; then \ 2908 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2909 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2910 -@echo '";' >> $@ 2911 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2912 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2913 -@echo '";' >> $@ 2914 -@sh $(srcdir)/pathdef.sh 2915 2916GUI_GTK_RES_INPUTS = \ 2917 ../pixmaps/stock_vim_build_tags.png \ 2918 ../pixmaps/stock_vim_find_help.png \ 2919 ../pixmaps/stock_vim_save_all.png \ 2920 ../pixmaps/stock_vim_session_load.png \ 2921 ../pixmaps/stock_vim_session_new.png \ 2922 ../pixmaps/stock_vim_session_save.png \ 2923 ../pixmaps/stock_vim_shell.png \ 2924 ../pixmaps/stock_vim_window_maximize.png \ 2925 ../pixmaps/stock_vim_window_maximize_width.png \ 2926 ../pixmaps/stock_vim_window_minimize.png \ 2927 ../pixmaps/stock_vim_window_minimize_width.png \ 2928 ../pixmaps/stock_vim_window_split.png \ 2929 ../pixmaps/stock_vim_window_split_vertical.png 2930 2931auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2932 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2933auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2934 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2935 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2936 fi 2937 2938# All the object files are put in the "objects" directory. Since not all make 2939# commands understand putting object files in another directory, it must be 2940# specified for each file separately. 2941 2942objects: objects/.dirstamp 2943 2944objects/.dirstamp: 2945 $(MKDIR_P) objects 2946 touch objects/.dirstamp 2947 2948# All object files depend on the objects directory, so that parallel make 2949# works. Can't depend on the directory itself, its timestamp changes all the 2950# time. 2951$(ALL_OBJ): objects/.dirstamp 2952 2953objects/arabic.o: arabic.c 2954 $(CCC) -o $@ arabic.c 2955 2956objects/autocmd.o: autocmd.c 2957 $(CCC) -o $@ autocmd.c 2958 2959objects/blob.o: blob.c 2960 $(CCC) -o $@ blob.c 2961 2962objects/blowfish.o: blowfish.c 2963 $(CCC) -o $@ blowfish.c 2964 2965objects/buffer.o: buffer.c 2966 $(CCC) -o $@ buffer.c 2967 2968objects/charset.o: charset.c 2969 $(CCC) -o $@ charset.c 2970 2971objects/crypt.o: crypt.c 2972 $(CCC) -o $@ crypt.c 2973 2974objects/crypt_zip.o: crypt_zip.c 2975 $(CCC) -o $@ crypt_zip.c 2976 2977objects/debugger.o: debugger.c 2978 $(CCC) -o $@ debugger.c 2979 2980objects/dict.o: dict.c 2981 $(CCC) -o $@ dict.c 2982 2983objects/diff.o: diff.c $(XDIFF_INCL) 2984 $(CCC) -o $@ diff.c 2985 2986objects/digraph.o: digraph.c 2987 $(CCC) -o $@ digraph.c 2988 2989objects/edit.o: edit.c 2990 $(CCC) -o $@ edit.c 2991 2992objects/eval.o: eval.c 2993 $(CCC) -o $@ eval.c 2994 2995objects/evalfunc.o: evalfunc.c 2996 $(CCC) -o $@ evalfunc.c 2997 2998objects/ex_cmds.o: ex_cmds.c 2999 $(CCC) -o $@ ex_cmds.c 3000 3001objects/ex_cmds2.o: ex_cmds2.c 3002 $(CCC) -o $@ ex_cmds2.c 3003 3004objects/ex_docmd.o: ex_docmd.c 3005 $(CCC) -o $@ ex_docmd.c 3006 3007objects/ex_eval.o: ex_eval.c 3008 $(CCC) -o $@ ex_eval.c 3009 3010objects/ex_getln.o: ex_getln.c 3011 $(CCC) -o $@ ex_getln.c 3012 3013objects/fileio.o: fileio.c 3014 $(CCC) -o $@ fileio.c 3015 3016objects/findfile.o: findfile.c 3017 $(CCC) -o $@ findfile.c 3018 3019objects/fold.o: fold.c 3020 $(CCC) -o $@ fold.c 3021 3022objects/getchar.o: getchar.c 3023 $(CCC) -o $@ getchar.c 3024 3025objects/hardcopy.o: hardcopy.c 3026 $(CCC) -o $@ hardcopy.c 3027 3028objects/hashtab.o: hashtab.c 3029 $(CCC) -o $@ hashtab.c 3030 3031objects/gui.o: gui.c 3032 $(CCC) -o $@ gui.c 3033 3034objects/gui_at_fs.o: gui_at_fs.c 3035 $(CCC) -o $@ gui_at_fs.c 3036 3037objects/gui_at_sb.o: gui_at_sb.c 3038 $(CCC) -o $@ gui_at_sb.c 3039 3040objects/gui_athena.o: gui_athena.c 3041 $(CCC) -o $@ gui_athena.c 3042 3043objects/beval.o: beval.c 3044 $(CCC) -o $@ beval.c 3045 3046objects/gui_beval.o: gui_beval.c 3047 $(CCC) -o $@ gui_beval.c 3048 3049objects/gui_gtk.o: gui_gtk.c 3050 $(CCC) -o $@ gui_gtk.c 3051 3052objects/gui_gtk_f.o: gui_gtk_f.c 3053 $(CCC) -o $@ gui_gtk_f.c 3054 3055objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3056 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3057 3058objects/gui_gtk_x11.o: gui_gtk_x11.c 3059 $(CCC) -o $@ gui_gtk_x11.c 3060 3061objects/gui_motif.o: gui_motif.c 3062 $(CCC) -o $@ gui_motif.c 3063 3064objects/gui_xmdlg.o: gui_xmdlg.c 3065 $(CCC) -o $@ gui_xmdlg.c 3066 3067objects/gui_xmebw.o: gui_xmebw.c 3068 $(CCC) -o $@ gui_xmebw.c 3069 3070objects/gui_x11.o: gui_x11.c 3071 $(CCC) -o $@ gui_x11.c 3072 3073objects/gui_photon.o: gui_photon.c 3074 $(CCC) -o $@ gui_photon.c 3075 3076objects/gui_mac.o: gui_mac.c 3077 $(CCC) -o $@ gui_mac.c 3078 3079objects/hangulin.o: hangulin.c 3080 $(CCC) -o $@ hangulin.c 3081 3082objects/if_cscope.o: if_cscope.c 3083 $(CCC) -o $@ if_cscope.c 3084 3085objects/if_xcmdsrv.o: if_xcmdsrv.c 3086 $(CCC) -o $@ if_xcmdsrv.c 3087 3088objects/if_lua.o: if_lua.c 3089 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3090 3091objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3092 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3093 3094mzscheme_base.c: 3095 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3096 3097objects/if_perl.o: auto/if_perl.c 3098 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3099 3100objects/if_perlsfio.o: if_perlsfio.c 3101 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3102 3103objects/if_python.o: if_python.c if_py_both.h 3104 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3105 3106objects/if_python3.o: if_python3.c if_py_both.h 3107 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3108 3109objects/if_ruby.o: if_ruby.c 3110 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3111 3112objects/if_tcl.o: if_tcl.c 3113 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3114 3115objects/indent.o: indent.c 3116 $(CCC) -o $@ indent.c 3117 3118objects/insexpand.o: insexpand.c 3119 $(CCC) -o $@ insexpand.c 3120 3121objects/json.o: json.c 3122 $(CCC) -o $@ json.c 3123 3124objects/json_test.o: json_test.c 3125 $(CCC) -o $@ json_test.c 3126 3127objects/kword_test.o: kword_test.c 3128 $(CCC) -o $@ kword_test.c 3129 3130objects/list.o: list.c 3131 $(CCC) -o $@ list.c 3132 3133objects/main.o: main.c 3134 $(CCC) -o $@ main.c 3135 3136objects/mark.o: mark.c 3137 $(CCC) -o $@ mark.c 3138 3139objects/memfile.o: memfile.c 3140 $(CCC) -o $@ memfile.c 3141 3142objects/memfile_test.o: memfile_test.c 3143 $(CCC) -o $@ memfile_test.c 3144 3145objects/memline.o: memline.c 3146 $(CCC) -o $@ memline.c 3147 3148objects/menu.o: menu.c 3149 $(CCC) -o $@ menu.c 3150 3151objects/message.o: message.c 3152 $(CCC) -o $@ message.c 3153 3154objects/message_test.o: message_test.c 3155 $(CCC) -o $@ message_test.c 3156 3157objects/misc1.o: misc1.c 3158 $(CCC) -o $@ misc1.c 3159 3160objects/misc2.o: misc2.c 3161 $(CCC) -o $@ misc2.c 3162 3163objects/move.o: move.c 3164 $(CCC) -o $@ move.c 3165 3166objects/mbyte.o: mbyte.c 3167 $(CCC) -o $@ mbyte.c 3168 3169objects/normal.o: normal.c 3170 $(CCC) -o $@ normal.c 3171 3172objects/ops.o: ops.c 3173 $(CCC) -o $@ ops.c 3174 3175objects/option.o: option.c 3176 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3177 3178objects/os_beos.o: os_beos.c 3179 $(CCC) -o $@ os_beos.c 3180 3181objects/os_qnx.o: os_qnx.c 3182 $(CCC) -o $@ os_qnx.c 3183 3184objects/os_macosx.o: os_macosx.m 3185 $(CCC) -o $@ os_macosx.m 3186 3187objects/os_mac_conv.o: os_mac_conv.c 3188 $(CCC) -o $@ os_mac_conv.c 3189 3190objects/os_unix.o: os_unix.c 3191 $(CCC) -o $@ os_unix.c 3192 3193objects/os_mswin.o: os_mswin.c 3194 $(CCC) -o $@ os_mswin.c 3195 3196objects/winclip.o: winclip.c 3197 $(CCC) -o $@ winclip.c 3198 3199objects/pathdef.o: auto/pathdef.c 3200 $(CCC) -o $@ auto/pathdef.c 3201 3202objects/popupmnu.o: popupmnu.c 3203 $(CCC) -o $@ popupmnu.c 3204 3205objects/pty.o: pty.c 3206 $(CCC) -o $@ pty.c 3207 3208objects/quickfix.o: quickfix.c 3209 $(CCC) -o $@ quickfix.c 3210 3211objects/regexp.o: regexp.c regexp_nfa.c 3212 $(CCC) -o $@ regexp.c 3213 3214objects/screen.o: screen.c 3215 $(CCC) -o $@ screen.c 3216 3217objects/search.o: search.c 3218 $(CCC) -o $@ search.c 3219 3220objects/sha256.o: sha256.c 3221 $(CCC) -o $@ sha256.c 3222 3223objects/sign.o: sign.c 3224 $(CCC) -o $@ sign.c 3225 3226objects/spell.o: spell.c 3227 $(CCC) -o $@ spell.c 3228 3229objects/spellfile.o: spellfile.c 3230 $(CCC) -o $@ spellfile.c 3231 3232objects/syntax.o: syntax.c 3233 $(CCC) -o $@ syntax.c 3234 3235objects/tag.o: tag.c 3236 $(CCC) -o $@ tag.c 3237 3238objects/term.o: term.c 3239 $(CCC) -o $@ term.c 3240 3241objects/terminal.o: terminal.c $(TERM_DEPS) 3242 $(CCC) -o $@ terminal.c 3243 3244objects/textprop.o: textprop.c 3245 $(CCC) -o $@ textprop.c 3246 3247objects/ui.o: ui.c 3248 $(CCC) -o $@ ui.c 3249 3250objects/undo.o: undo.c 3251 $(CCC) -o $@ undo.c 3252 3253objects/usercmd.o: usercmd.c 3254 $(CCC) -o $@ usercmd.c 3255 3256objects/userfunc.o: userfunc.c 3257 $(CCC) -o $@ userfunc.c 3258 3259objects/window.o: window.c 3260 $(CCC) -o $@ window.c 3261 3262objects/netbeans.o: netbeans.c 3263 $(CCC) -o $@ netbeans.c 3264 3265objects/channel.o: channel.c 3266 $(CCC) -o $@ channel.c 3267 3268Makefile: 3269 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3270 3271CCCTERM = $(CCC_NF) $(VTERM_CFLAGS) $(ALL_CFLAGS) -DINLINE="" \ 3272 -DVSNPRINTF=vim_vsnprintf \ 3273 -DIS_COMBINING_FUNCTION=utf_iscomposing_uint \ 3274 -DWCWIDTH_FUNCTION=utf_uint2cells 3275 3276objects/encoding.o: libvterm/src/encoding.c $(TERM_DEPS) 3277 $(CCCTERM) -o $@ libvterm/src/encoding.c 3278 3279objects/keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) 3280 $(CCCTERM) -o $@ libvterm/src/keyboard.c 3281 3282objects/mouse.o: libvterm/src/mouse.c $(TERM_DEPS) 3283 $(CCCTERM) -o $@ libvterm/src/mouse.c 3284 3285objects/parser.o: libvterm/src/parser.c $(TERM_DEPS) 3286 $(CCCTERM) -o $@ libvterm/src/parser.c 3287 3288objects/pen.o: libvterm/src/pen.c $(TERM_DEPS) 3289 $(CCCTERM) -o $@ libvterm/src/pen.c 3290 3291objects/termscreen.o: libvterm/src/termscreen.c $(TERM_DEPS) 3292 $(CCCTERM) -o $@ libvterm/src/termscreen.c 3293 3294objects/state.o: libvterm/src/state.c $(TERM_DEPS) 3295 $(CCCTERM) -o $@ libvterm/src/state.c 3296 3297objects/unicode.o: libvterm/src/unicode.c $(TERM_DEPS) 3298 $(CCCTERM) -o $@ libvterm/src/unicode.c 3299 3300objects/vterm.o: libvterm/src/vterm.c $(TERM_DEPS) 3301 $(CCCTERM) -o $@ libvterm/src/vterm.c 3302 3303CCCDIFF = $(CCC_NF) $(ALL_CFLAGS) 3304 3305objects/xdiffi.o: xdiff/xdiffi.c $(XDIFF_INCL) 3306 $(CCCDIFF) -o $@ xdiff/xdiffi.c 3307 3308objects/xprepare.o: xdiff/xprepare.c $(XDIFF_INCL) 3309 $(CCCDIFF) -o $@ xdiff/xprepare.c 3310 3311objects/xutils.o: xdiff/xutils.c $(XDIFF_INCL) 3312 $(CCCDIFF) -o $@ xdiff/xutils.c 3313 3314objects/xemit.o: xdiff/xemit.c $(XDIFF_INCL) 3315 $(CCCDIFF) -o $@ xdiff/xemit.c 3316 3317objects/xhistogram.o: xdiff/xhistogram.c $(XDIFF_INCL) 3318 $(CCCDIFF) -o $@ xdiff/xhistogram.c 3319 3320objects/xpatience.o: xdiff/xpatience.c $(XDIFF_INCL) 3321 $(CCCDIFF) -o $@ xdiff/xpatience.c 3322 3323 3324############################################################################### 3325### MacOS X installation 3326### 3327### This installs a runnable Vim.app in $(prefix) 3328 3329REZ = /Developer/Tools/Rez 3330RESDIR = $(APPDIR)/Contents/Resources 3331VERSION = $(VIMMAJOR).$(VIMMINOR) 3332 3333### Common flags 3334M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3335 -DAPP_VER=$(VERSION) 3336 3337install_macosx: gui_bundle 3338# Remove the link to the runtime dir, don't want to copy all of that. 3339 -rm $(RESDIR)/vim/runtime 3340 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3341# Generate the help tags file now, it won't work with "make installruntime". 3342 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3343# Install the runtime files. Recursive! 3344 $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3345 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3346 VIMEXE=$$srcdir/$(VIMTARGET) \ 3347 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3348 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3349 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3350 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3351 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3352# Put the link back. 3353 ln -s `pwd`/../runtime $(RESDIR)/vim 3354# Copy rgb.txt, Mac doesn't always have X11 3355 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3356# TODO: Create the vimtutor and/or gvimtutor application. 3357 3358gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3359 bundle-language 3360 3361$(RESDIR): 3362 $(MKDIR_P) $@ 3363 3364bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3365# Make a link to the runtime directory, so that we can try out the executable 3366# without installing it. 3367 $(MKDIR_P) $(RESDIR)/vim 3368 -ln -s `pwd`/../runtime $(RESDIR)/vim 3369 3370bundle-executable: $(VIMTARGET) 3371 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3372 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3373 3374bundle-info: bundle-dir 3375 @echo "Creating PkgInfo" 3376 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3377 @echo "Creating Info.plist" 3378 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3379 3380bundle-resource: bundle-dir bundle-rsrc 3381 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3382 3383### Classic resources 3384# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3385# This file is also required for OS X Vim. 3386bundle-rsrc: os_mac.rsr.hqx 3387 @echo "Creating resource fork" 3388 python dehqx.py $< 3389 rm -f gui_mac.rsrc 3390 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3391 3392# po/Make_osx.pl says something about generating a Mac message file 3393# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3394# *really* be upset that Carbon Vim was not localised in 3395# Ukrainian? 3396# 3397#bundle-language: bundle-dir po/Make_osx.pl 3398# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3399bundle-language: bundle-dir 3400 3401$(APPDIR)/Contents: 3402 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3403 $(MKDIR_P) $(RESDIR)/English.lproj 3404 3405 3406############################################################################### 3407### (automatically generated by 'make depend') 3408### Dependencies: 3409objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3410 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3411 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3412 proto.h globals.h 3413objects/autocmd.o: autocmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3414 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3415 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3416 proto.h globals.h 3417objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3418 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3419 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3420 proto.h globals.h 3421objects/blob.o: blob.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3422 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3423 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3424 proto.h globals.h 3425objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3426 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3427 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3428 proto.h globals.h 3429objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3430 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3431 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3432 proto.h globals.h version.h 3433objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3434 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3435 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3436 proto.h globals.h 3437objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3438 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3439 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3440 proto.h globals.h 3441objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \ 3442 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3443 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3444 proto.h globals.h 3445objects/debugger.o: debugger.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3446 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3447 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3448 proto.h globals.h 3449objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3450 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3451 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3452 proto.h globals.h 3453objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3454 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3455 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3456 proto.h globals.h xdiff/xdiff.h vim.h 3457objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3458 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3459 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3460 proto.h globals.h 3461objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3462 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3463 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3464 proto.h globals.h 3465objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3466 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3467 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3468 proto.h globals.h version.h 3469objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3470 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3471 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3472 proto.h globals.h version.h 3473objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3474 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3475 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3476 proto.h globals.h version.h 3477objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3478 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3479 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3480 proto.h globals.h version.h 3481objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3482 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3483 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3484 proto.h globals.h ex_cmdidxs.h 3485objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3486 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3487 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3488 proto.h globals.h 3489objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3490 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3491 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3492 proto.h globals.h 3493objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3494 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3495 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3496 proto.h globals.h 3497objects/findfile.o: findfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3498 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3499 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3500 proto.h globals.h 3501objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3502 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3503 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3504 proto.h globals.h 3505objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3506 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3507 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3508 proto.h globals.h 3509objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3510 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3511 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3512 proto.h globals.h version.h 3513objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3514 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3515 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3516 proto.h globals.h 3517objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \ 3518 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3519 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3520 proto.h globals.h if_cscope.h 3521objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \ 3522 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3523 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3524 proto.h globals.h version.h 3525objects/indent.o: indent.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3526 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3527 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3528 proto.h globals.h 3529objects/insexpand.o: insexpand.c vim.h protodef.h auto/config.h feature.h \ 3530 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3531 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3532 proto.h globals.h 3533objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3534 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3535 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3536 proto.h globals.h 3537objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3538 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3539 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3540 proto.h globals.h 3541objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3542 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3543 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3544 proto.h globals.h 3545objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3546 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3547 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3548 proto.h globals.h 3549objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3550 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3551 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3552 proto.h globals.h 3553objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3554 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3555 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3556 proto.h globals.h 3557objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3558 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3559 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3560 proto.h globals.h 3561objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3562 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3563 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3564 proto.h globals.h 3565objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3566 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3567 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3568 proto.h globals.h version.h 3569objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3570 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3571 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3572 proto.h globals.h 3573objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3574 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3575 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3576 proto.h globals.h 3577objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3578 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3579 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3580 proto.h globals.h 3581objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3582 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3583 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3584 proto.h globals.h 3585objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3586 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3587 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3588 proto.h globals.h 3589objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3590 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3591 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3592 proto.h globals.h 3593objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3594 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3595 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3596 proto.h globals.h os_unixx.h 3597objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \ 3598 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3599 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3600 proto.h globals.h 3601objects/popupmnu.o: popupmnu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3602 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3603 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3604 proto.h globals.h 3605objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3606 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3607 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3608 proto.h globals.h 3609objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3610 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3611 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3612 proto.h globals.h 3613objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3614 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3615 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3616 proto.h globals.h regexp_nfa.c 3617objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3618 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3619 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3620 proto.h globals.h 3621objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3622 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3623 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3624 proto.h globals.h 3625objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3626 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3627 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3628 proto.h globals.h 3629objects/sign.o: sign.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3630 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3631 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3632 proto.h globals.h 3633objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3634 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3635 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3636 proto.h globals.h 3637objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \ 3638 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3639 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3640 proto.h globals.h 3641objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3642 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3643 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3644 proto.h globals.h 3645objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3646 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3647 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3648 proto.h globals.h 3649objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3650 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3651 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3652 proto.h globals.h libvterm/include/vterm.h \ 3653 libvterm/include/vterm_keycodes.h 3654objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3655 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3656 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3657 proto.h globals.h libvterm/include/vterm.h \ 3658 libvterm/include/vterm_keycodes.h 3659objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3660 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3661 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3662 proto.h globals.h 3663objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3664 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3665 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3666 proto.h globals.h 3667objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3668 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3669 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3670 proto.h globals.h 3671objects/usercmd.o: usercmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3672 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3673 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3674 proto.h globals.h 3675objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3676 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3677 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3678 proto.h globals.h 3679objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3680 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3681 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3682 proto.h globals.h version.h 3683objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3684 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3685 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3686 proto.h globals.h 3687objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3688 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3689 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3690 proto.h globals.h 3691objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3692 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3693 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3694 proto.h globals.h gui_gtk_f.h 3695objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \ 3696 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3697 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3698 proto.h globals.h gui_gtk_f.h 3699objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \ 3700 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3701 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3702 proto.h globals.h gui_xmebw.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \ 3703 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm \ 3704 gui_x11_pm.h ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm \ 3705 ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm \ 3706 ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm \ 3707 ../pixmaps/tb_find.xpm ../pixmaps/tb_find_next.xpm \ 3708 ../pixmaps/tb_find_prev.xpm ../pixmaps/tb_find_help.xpm \ 3709 ../pixmaps/tb_exit.xpm ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm \ 3710 ../pixmaps/tb_help.xpm ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3711 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3712 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3713 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3714 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3715 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3716 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3717 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3718 ../pixmaps/tb_minwidth.xpm 3719objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \ 3720 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3721 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3722 proto.h globals.h 3723objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \ 3724 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3725 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3726 proto.h globals.h gui_xmebwp.h gui_xmebw.h 3727objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \ 3728 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3729 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3730 proto.h globals.h gui_at_sb.h gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3731 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3732 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3733 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3734 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3735 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3736 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3737 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3738 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3739 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3740 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3741 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3742 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3743 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3744 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3745 ../pixmaps/tb_minwidth.xpm 3746objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \ 3747 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3748 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3749 proto.h globals.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3750 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3751objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3752 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3753 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3754 proto.h globals.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3755 ../runtime/vim48x48.xpm 3756objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \ 3757 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3758 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3759 proto.h globals.h gui_at_sb.h 3760objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \ 3761 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3762 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3763 proto.h globals.h gui_at_sb.h 3764objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \ 3765 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3766 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3767 proto.h globals.h json.c 3768objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \ 3769 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3770 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3771 ex_cmds.h spell.h proto.h globals.h charset.c 3772objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \ 3773 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3774 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3775 ex_cmds.h spell.h proto.h globals.h memfile.c 3776objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \ 3777 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3778 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3779 ex_cmds.h spell.h proto.h globals.h message.c 3780objects/hangulin.o: hangulin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3781 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3782 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3783 proto.h globals.h 3784objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3785 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3786 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3787 proto.h globals.h 3788objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3789 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3790 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3791 proto.h globals.h if_mzsch.h 3792objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \ 3793 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3794 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3795 proto.h globals.h 3796objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \ 3797 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3798 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3799 proto.h globals.h 3800objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \ 3801 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3802 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3803 proto.h globals.h if_py_both.h 3804objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \ 3805 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3806 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3807 proto.h globals.h if_py_both.h 3808objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3809 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3810 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3811 proto.h globals.h 3812objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \ 3813 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3814 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3815 proto.h globals.h version.h 3816objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \ 3817 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3818 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3819 proto.h globals.h 3820objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3821 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3822 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3823 proto.h globals.h version.h 3824objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3825 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3826 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3827 proto.h globals.h 3828objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3829objects/encoding.o: libvterm/src/encoding.c libvterm/src/vterm_internal.h \ 3830 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3831 libvterm/src/encoding/DECdrawing.inc libvterm/src/encoding/uk.inc 3832objects/keyboard.o: libvterm/src/keyboard.c libvterm/src/vterm_internal.h \ 3833 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3834 libvterm/src/utf8.h 3835objects/mouse.o: libvterm/src/mouse.c libvterm/src/vterm_internal.h \ 3836 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3837 libvterm/src/utf8.h 3838objects/parser.o: libvterm/src/parser.c libvterm/src/vterm_internal.h \ 3839 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3840objects/pen.o: libvterm/src/pen.c libvterm/src/vterm_internal.h \ 3841 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3842objects/state.o: libvterm/src/state.c libvterm/src/vterm_internal.h \ 3843 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3844objects/termscreen.o: libvterm/src/termscreen.c libvterm/src/vterm_internal.h \ 3845 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3846 libvterm/src/rect.h libvterm/src/utf8.h 3847objects/unicode.o: libvterm/src/unicode.c libvterm/src/vterm_internal.h \ 3848 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3849objects/vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \ 3850 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3851 libvterm/src/utf8.h 3852objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \ 3853 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3854 auto/config.h feature.h os_unix.h \ 3855 auto/osdef.h ascii.h keymap.h term.h \ 3856 macros.h option.h beval.h proto/gui_beval.pro \ 3857 structs.h regexp.h gui.h alloc.h \ 3858 ex_cmds.h spell.h proto.h globals.h \ 3859 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3860 xdiff/xemit.h 3861objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \ 3862 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3863 auto/config.h feature.h os_unix.h \ 3864 auto/osdef.h ascii.h keymap.h term.h \ 3865 macros.h option.h beval.h proto/gui_beval.pro \ 3866 structs.h regexp.h gui.h alloc.h \ 3867 ex_cmds.h spell.h proto.h globals.h \ 3868 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3869 xdiff/xemit.h 3870objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \ 3871 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3872 auto/config.h feature.h os_unix.h \ 3873 auto/osdef.h ascii.h keymap.h term.h \ 3874 macros.h option.h beval.h proto/gui_beval.pro \ 3875 structs.h regexp.h gui.h alloc.h \ 3876 ex_cmds.h spell.h proto.h globals.h \ 3877 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3878 xdiff/xemit.h 3879objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \ 3880 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3881 auto/config.h feature.h os_unix.h \ 3882 auto/osdef.h ascii.h keymap.h term.h \ 3883 macros.h option.h beval.h proto/gui_beval.pro \ 3884 structs.h regexp.h gui.h alloc.h \ 3885 ex_cmds.h spell.h proto.h globals.h \ 3886 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3887 xdiff/xemit.h 3888objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \ 3889 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3890 auto/config.h feature.h os_unix.h \ 3891 auto/osdef.h ascii.h keymap.h term.h \ 3892 macros.h option.h beval.h proto/gui_beval.pro \ 3893 structs.h regexp.h gui.h alloc.h \ 3894 ex_cmds.h spell.h proto.h globals.h \ 3895 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3896 xdiff/xemit.h 3897objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \ 3898 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3899 auto/config.h feature.h os_unix.h \ 3900 auto/osdef.h ascii.h keymap.h term.h \ 3901 macros.h option.h beval.h proto/gui_beval.pro \ 3902 structs.h regexp.h gui.h alloc.h \ 3903 ex_cmds.h spell.h proto.h globals.h \ 3904 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3905 xdiff/xemit.h 3906
