1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples (can only use one!): 321#CONF_ARGS = --exec-prefix=/usr 322#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 323#CONF_ARGS = --with-global-runtime=/etc/vim 324#CONF_ARGS = --with-local-dir=/usr/share 325#CONF_ARGS = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome2-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406# This requires at least "normal" features, "tiny" and "small" don't work. 407#CONF_OPT_LUA = --enable-luainterp 408#CONF_OPT_LUA = --enable-luainterp=dynamic 409#CONF_OPT_LUA = --enable-luainterp --with-luajit 410#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 411# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 412#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 413 414# MZSCHEME 415# Uncomment this when you want to include the MzScheme interface. 416# NOTE: does not work well together with valgrind. 417#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 418# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 420#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 421#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 422 423# PERL 424# Uncomment one of these when you want to include the Perl interface. 425# First one is for static linking, second one for dynamic loading. 426# The Perl option sometimes causes problems, because it adds extra flags 427# 428# to the command line. If you see strange flags during compilation, check in 429# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 430# the next line. 431# When you get an error for a missing "perl.exp" file, try creating an empty 432# one: "touch perl.exp". 433# This requires at least "normal" features, "tiny" and "small" don't work. 434#CONF_OPT_PERL = --enable-perlinterp 435#CONF_OPT_PERL = --enable-perlinterp=dynamic 436 437# PYTHON 438# Uncomment lines here when you want to include the Python interface. 439# This requires at least "normal" features, "tiny" and "small" don't work. 440# NOTE: This may cause threading to be enabled, which has side effects (such 441# as using different libraries and debugging becomes more difficult). 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 450#CONF_OPT_PYTHON3 = --enable-python3interp 451#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 452 453# RUBY 454# Uncomment this when you want to include the Ruby interface. 455# First one for static linking, second one for loading when used. 456# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 457# This requires at least "normal" features, "tiny" and "small" don't work. 458#CONF_OPT_RUBY = --enable-rubyinterp 459#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 460#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 461 462# TCL 463# Uncomment this when you want to include the Tcl interface. 464# First one is for static linking, second one for dynamic loading. 465#CONF_OPT_TCL = --enable-tclinterp 466#CONF_OPT_TCL = --enable-tclinterp=dynamic 467#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 468 469# CSCOPE 470# Uncomment this when you want to include the Cscope interface. 471#CONF_OPT_CSCOPE = --enable-cscope 472 473# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 474#CONF_OPT_WORKSHOP = --enable-workshop 475 476# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 477# Motif version must have XPM libraries (see |workshop-xpm|). 478# Uncomment this when you do not want the netbeans interface. 479#CONF_OPT_NETBEANS = --disable-netbeans 480 481# CHANNEL - inter process communication. Same conditions as NetBeans. 482# Uncomment this when you do not want inter process communication. 483#CONF_OPT_CHANNEL = --disable-channel 484 485# TERMINAL - Terminal emulator support, :terminal command. Requires the 486# channel feature. 487# Uncomment this when you want terminal emulator support. 488#CONF_OPT_TERMINAL = --enable-terminal 489 490# MULTIBYTE - To edit multi-byte characters. 491# Uncomment this when you want to edit a multibyte language. 492# It's automatically enabled with normal features, GTK or IME support. 493# Note: Compile on a machine where setlocale() actually works, otherwise the 494# configure tests may fail. 495#CONF_OPT_MULTIBYTE = --enable-multibyte 496 497# NLS - National Language Support 498# Uncomment this when you do not want to support translated messages, even 499# though configure can find support for it. 500#CONF_OPT_NLS = --disable-nls 501 502# XIM - X Input Method. Special character input support for X11 (Chinese, 503# Japanese, special symbols, etc). Also needed for dead-key support. 504# When omitted it's automatically enabled for the X-windows GUI. 505# HANGUL - Input Hangul (Korean) language using internal routines. 506# Uncomment one of these when you want to input a multibyte language. 507#CONF_OPT_INPUT = --enable-xim 508#CONF_OPT_INPUT = --disable-xim 509#CONF_OPT_INPUT = --enable-hangulinput 510 511# FONTSET - X fontset support for output of languages with many characters. 512# Uncomment this when you want to output a multibyte language. 513#CONF_OPT_OUTPUT = --enable-fontset 514 515# ACL - Uncomment this when you do not want to include ACL support, even 516# though your system does support it. E.g., when it's buggy. 517#CONF_OPT_ACL = --disable-acl 518 519# gpm - For mouse support on Linux console via gpm 520# Uncomment this when you do not want to include gpm support, even 521# though you have gpm libraries and includes. 522#CONF_OPT_GPM = --disable-gpm 523 524# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 525# Uncomment this when you do not want do include sysmouse support, even 526# though you have /dev/sysmouse and includes. 527#CONF_OPT_SYSMOUSE = --disable-sysmouse 528 529# FEATURES - For creating Vim with more or less features 530# Uncomment one of these lines when you want to include few to many features. 531# The default is "huge" for most systems. 532#CONF_OPT_FEAT = --with-features=tiny 533#CONF_OPT_FEAT = --with-features=small 534#CONF_OPT_FEAT = --with-features=normal 535#CONF_OPT_FEAT = --with-features=big 536#CONF_OPT_FEAT = --with-features=huge 537 538# COMPILED BY - For including a specific e-mail address for ":version". 539#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 540 541# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 542# (otherwise Vim configure will try to include xterm titlebar access) 543# Also disable the GUI above, otherwise it will be included anyway. 544# When both GUI and X11 have been disabled this may save about 15% of the 545# code and make Vim startup quicker. 546#CONF_OPT_X = --without-x 547 548# X WINDOWS DIRECTORY - specify X directories 549# If configure can't find you X stuff, or if you have multiple X11 derivatives 550# installed, you may wish to specify which one to use. 551# Select nothing to let configure choose. 552# This here selects openwin (as found on sun). 553#XROOT = /usr/openwin 554#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 555 556# X11 Session Management Protocol support 557# Vim will try to use XSMP to catch the user logging out if there are unsaved 558# files. Uncomment this line to disable that (it prevents vim trying to open 559# communications with the session manager). 560#CONF_OPT_XSMP = --disable-xsmp 561 562# You may wish to include xsmp but use exclude xsmp-interact if the logout 563# XSMP functionality does not work well with your session-manager (at time of 564# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 565# applications after Vim has cancelled a logout (until Vim quits). This 566# *might* be the Vim code, but is more likely a bug in early GNOME-1. 567# This disables the dialog that asks you if you want to save files or not. 568#CONF_OPT_XSMP = --disable-xsmp-interact 569 570# COMPILER - Name of the compiler {{{1 571# The default from configure will mostly be fine, no need to change this, just 572# an example. If a compiler is defined here, configure will use it rather than 573# probing for one. It is dangerous to change this after configure was run. 574# Make will use your choice then -- but beware: Many things may change with 575# another compiler. It is wise to run 'make reconfig' to start all over 576# again. 577#CC = cc 578#CC = gcc 579#CC = clang 580 581# COMPILER FLAGS - change as you please. Either before running {{{1 582# configure or afterwards. For examples see below. 583# When using -g with some older versions of Linux you might get a 584# statically linked executable. 585# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 586#CFLAGS = -g 587#CFLAGS = -O 588 589# Optimization limits - depends on the compiler. Automatic check in configure 590# doesn't work very well, because many compilers only give a warning for 591# unrecognized arguments. 592#CFLAGS = -O -OPT:Olimit=2600 593#CFLAGS = -O -Olimit 2000 594#CFLAGS = -O -FOlimit,2000 595 596# Often used for GCC: mixed optimizing, lot of optimizing, debugging 597#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 598#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 599#CFLAGS = -g -Wall -Wmissing-prototypes 600#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 601#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 602#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 603 604# Use this with GCC to check for mistakes, unused arguments, etc. 605#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 606# Add -Wpedantic to find // comments and other C99 constructs. 607# Better disable Perl and Python to avoid a lot of warnings. 608#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 609#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG 610#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 611#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 612 613# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 614# allocated memory (and makes every malloc()/free() very slow). 615# Electric Fence is free (search ftp sites). 616# You may want to set the EF_PROTECT_BELOW environment variable to check the 617# other side of allocated memory. 618# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 619# as root: sysctl -w vm.max_proc_mmap=30000 620#EXTRA_LIBS = /usr/local/lib/libefence.a 621 622# Autoconf binary. 623AUTOCONF = autoconf 624 625# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 626#PURIFY = purify 627 628# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 629# Used for the unittest targets. 630# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 631 632# NBDEBUG - debugging the netbeans interface. 633#EXTRA_DEFS = -DNBDEBUG 634 635# }}} 636 637# LINT - for running lint 638# For standard Unix lint 639LINT = lint 640LINT_OPTIONS = -beprxzF 641# For splint 642# It doesn't work well, crashes on include files and non-ascii characters. 643#LINT = splint 644#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 645 646# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 647# Might not work with GUI or Perl. 648# For unknown reasons adding "-lc" fixes a linking problem with some versions 649# of GCC. That's probably a bug in the "-pg" implementation. 650# After running Vim see the profile result with: gprof vim gmon.out | vim - 651# Need to recompile everything after changing this: "make clean" "make". 652#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 653#PROFILE_LIBS = -pg 654#PROFILE_LIBS = -pg -lc 655 656 657# TEST COVERAGE - Uncomment the two lines below the explanation to get code 658# coverage information. (provided by Yegappan Lakshmanan) 659# 1. make clean, run configure and build Vim as usual. 660# 2. Generate the baseline code coverage information: 661# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 662# 3. Run "make test" to run the unit tests. The code coverage information will 663# be generated in the src/objects directory. 664# 4. Generate the code coverage information from the tests: 665# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 666# 5. Combine the baseline and test code coverage data: 667# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 668# 6. Process the test coverage data and generate a report in html: 669# $ genhtml objects/coverage_total.info -o objects 670# 7. Open the objects/index.html file in a web browser to view the coverage 671# information. 672# 673# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 674# LDFLAGS=--coverage 675 676 677# Uncomment one of the next two lines to compile Vim with the 678# address sanitizer or with the undefined sanitizer. Works with gcc and 679# clang. May make Vim twice as slow. Errors reported on stderr. 680# More at: https://code.google.com/p/address-sanitizer/ 681#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 682#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 683SANITIZER_LIBS = $(SANITIZER_CFLAGS) 684 685# MEMORY LEAK DETECTION 686# Requires installing the ccmalloc library. 687# Configuration is in the .ccmalloc or ~/.ccmalloc file. 688# Doesn't work very well, since memory linked to from global variables 689# (in libraries) is also marked as leaked memory. 690#LEAK_CFLAGS = -DEXITFREE 691#LEAK_LIBS = -lccmalloc 692 693# Uncomment this line to have Vim call abort() when an internal error is 694# detected. Useful when using a tool to find errors. 695#ABORT_CLFAGS = -DABORT_ON_INTERNAL_ERROR 696 697##################################################### 698### Specific systems, check if yours is listed! ### {{{ 699##################################################### 700 701### Uncomment things here only if the values chosen by configure are wrong. 702### It's better to adjust configure.ac and "make autoconf", if you can! 703### Then send the required changes to configure.ac to the bugs list. 704 705### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 706### 707#CC = shlicc2 708#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 709 710### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 711### The first probably works on all systems 712### The second should work a bit better on newer systems 713### The third should work a bit better on HPUX 11.11 714### Information provided by: Richard Allen <[email protected]> 715#CC = c89 -D_HPUX_SOURCE 716#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 717#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 718 719### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 720### when the default (ISO) digraphs look completely wrong. 721### After changing this do "touch digraph.c; make". 722#EXTRA_DEFS = -DHPUX_DIGRAPHS 723 724### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 725### is too small to compile many routines. It produces too much defining 726### and no space errors. 727### Uncomment the following to specify a larger macro definition table. 728#CFLAGS = -Wp,-H256000 729 730### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 731### libraries in /usr/lib instead of /lib (avoiding transition links). 732### Information provided by: David Green 733#XROOT = /usr 734#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 735#GUI_INC_LOC = -I/usr/include/Motif1.2 736#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 737 738### (5) AIX 4.1.4 with cc 739#CFLAGS = -O -qmaxmem=8192 740 741### AIX with c89 (Walter Briscoe) 742#CC = c89 743#CPPFLAGS = -D_ALL_SOURCE 744 745### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 746# needed to avoid a problem where strings.h gets included 747#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 748 749### (W) Solaris with multi-threaded libraries (-lthread): 750### If suspending doesn't work properly, try using this line: 751#EXTRA_DEFS = -D_REENTRANT 752 753### (7) Solaris 2.4/2.5 with Centerline compiler 754#CC = clcc 755#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 756#CFLAGS = -O 757 758### (9) Solaris 2.x with cc (SunPro), using Athena. 759### Only required for compiling gui_at_sb.c. 760### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 761### Use one of the lines (either Full ANSI or no ANSI at all) 762#CFLAGS = $(CFLAGS) -Xc 763#CFLAGS = $(CFLAGS) -Xs 764 765### Solaris 2.3 with X11 and specific cc 766#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 767 768### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 769#CC = /usr/ucb/cc 770#EXTRA_LIBS = -R/usr/ucblib 771 772### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 773# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 774#CC = cc 775#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 776#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 777#XPM_IPATH = -I$(XPM_DIR)/include 778#EXTRA_LIBS = $(XPM_LIB) 779#EXTRA_IPATHS = $(XPM_IPATH) 780#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 781 782### Solaris with workshop compilers: Vim is unstable when compiled with 783# "-fast". Use this instead. (Shea Martin) 784#CFLAGS = -x02 -xtarget=ultra 785 786### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 787#LDFLAGS = -lw -ldl -lXmu 788#GUI_LIB_LOC = -L/usr/local/lib 789 790### (8) Unisys 6035 (Glauber Ribeiro) 791#EXTRA_LIBS = -lnsl -lsocket -lgen 792 793### When builtin functions cause problems with gcc (for Sun 4.1.x) 794#CFLAGS = -O2 -Wall -traditional -Wno-implicit 795 796### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 797#EXTRA_DEFS = -DDOMAIN 798#CFLAGS= -O -A systype,bsd4.3 799 800### Coherent 4.2.10 on Intel 386 platform 801#EXTRA_DEFS = -Dvoid=int 802#EXTRA_LIBS = -lterm -lsocket 803 804### SCO 3.2, with different library name for terminfo 805#EXTRA_LIBS = -ltinfo 806 807### UTS2 for Amdahl UTS 2.1.x 808#EXTRA_DEFS = -DUTS2 809#EXTRA_LIBS = -lsocket 810 811### UTS4 for Amdahl UTS 4.x 812#EXTRA_DEFS = -DUTS4 -Xa 813 814### USL for Unix Systems Laboratories (SYSV 4.2) 815#EXTRA_DEFS = -DUSL 816 817### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 818#CC= gcc -D_POSIX_SOURCE 819#CFLAGS= -O2 820#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 821 822### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 823### Also use the CONF_TERM_LIB below! 824#EXTRA_LIBS = -lgen 825 826### (D) QNX (by G.F. Desrochers) 827#CFLAGS = -g -O -mf -4 828 829### (F) QNX (by John Oleynick) 830# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 831# CONF_OPT_X = --without-x. 832# 2. make config 833# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 834# have -ldir (does config find it somewhere?) and -ltermcap has at 835# least one problem so I use termlib.o instead. The problem with 836# termcap is that it segfaults if you call it with the name of 837# a non-existent terminal type. 838# 4. edit auto/config.h and add #define USE_TMPNAM 839# 5. add termlib.o to OBJ 840# 6. make 841 842### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 843#EXTRA_LIBS = -lgen 844 845### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 846#EXTRA_LIBS = -lgen -lnsl 847### For SINIX-Y this is needed for the right prototype of gettimeofday() 848#EXTRA_DEFS = -D_XPG_IV 849 850### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 851# Use both "-F O3" lines for optimization or the "-g" line for debugging 852#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 853#CFLAGS = -F O3 -DSINIXN 854#LDFLAGS = -F O3 855#CFLAGS = -g -DSINIXN 856 857### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 858#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 859#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 860 861### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 862#GUI_INC_LOC = -I/usr/include 863#GUI_LIB_LOC = -L/usr/lib 864#EXTRA_LIBS = -lgen 865 866### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 867#GUI_INC_LOC = -I/usr/necccs/include 868#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 869#XROOT = /usr/necccs 870#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 871#EXTRA_LIBS = -lsocket -lgen 872 873### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 874# Not needed for Irix 5.3, Ives Aerts reported 875#EXTRA_LIBS = -lmalloc -lc_s 876# Irix 4.0, when regexp and regcmp cannot be found when linking: 877#EXTRA_LIBS = -lmalloc -lc_s -lPW 878 879### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 880# Note: This newer option style is used with the MipsPro compilers ONLY if 881# you are compiling an "n32" or "64" ABI binary (use either a -n32 882# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 883# then the CFLAGS option format will be the typical style (i.e. 884# -Olimit 3000). 885#CFLAGS = -OPT:Olimit=3000 -O 886 887### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 888# compiler features! Beware, the optimization is EXTREMELY thorough 889# and takes quite a long time. 890# Note: See the note above. Here, the -mips3 option automatically 891# enables either the "n32" or "64" ABI, depending on what machine you 892# are compiling on (n32 is explicitly enabled here, just to make sure). 893#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 894#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 895 896### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 897### Suggested by Jon Wright <[email protected]>. 898### Tested on R8000 IRIX6.1 Power Indigo2. 899### Check /etc/compiler.defaults for your compiler settings. 900# either (for 64 bit pointers) uncomment the following line 901#GUI_LIB_LOC = -L/usr/lib64 902# then 903# 1) make config 904# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 905# 3) make 906# 907# or (for 32bit pointers) uncomment the following line 908#EXTRA_DEFS = -n32 909#GUI_LIB_LOC = -L/usr/lib32 910# then 911# 1) make config 912# 2) edit auto/config.mk, add -n32 to LDFLAGS 913# 3) make 914# 915#Alternatively: use -o32 instead of -n32. 916### 917 918### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 919### which is found by configure, doesn't work correctly. Symptom is the 920### error message "Termcap entry too long". Uncomment the next line. 921### On AIX 4.2.1 (and other versions probably), libtermcap is reported 922### not to display properly. 923### after changing this, you need to do "make reconfig". 924#CONF_TERM_LIB = --with-tlib=curses 925 926### (E) If you want to use termlib library instead of the automatically found 927### one. After changing this, you need to do "make reconfig". 928#CONF_TERM_LIB = --with-tlib=termlib 929 930### (a) ESIX V4.2 (Reinhard Wobst) 931#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 932 933### (c) Tandem/NSK (Matthew Woehlke) 934#EXTRA_LIBS = -lfloss 935 936### If you want to use ncurses library instead of the automatically found one 937### after changing this, you need to do "make reconfig". 938#CONF_TERM_LIB = --with-tlib=ncurses 939 940### For GCC on MS-Windows, the ".exe" suffix will be added. 941#EXEEXT = .exe 942#LNKEXT = .exe 943 944### (O) For LynxOS 2.5.0, tested on PC. 945#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 946### For LynxOS 3.0.1, tested on PPC 947#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 948### For LynxOS 3.1.0, tested on PC 949#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 950 951 952### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 953### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 954#CFLAGS = -O -Qtarget=m88110compat 955#EXTRA_LIBS = -lgen 956 957# The value of QUOTESED comes from auto/config.mk. 958# Uncomment the next line to use the default value. 959# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 960 961##################### end of system specific lines ################### }}} 962 963### Names of the programs and targets {{{1 964VIMTARGET = $(VIMNAME)$(EXEEXT) 965EXTARGET = $(EXNAME)$(LNKEXT) 966VIEWTARGET = $(VIEWNAME)$(LNKEXT) 967GVIMNAME = g$(VIMNAME) 968GVIMTARGET = $(GVIMNAME)$(LNKEXT) 969GVIEWNAME = g$(VIEWNAME) 970GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 971RVIMNAME = r$(VIMNAME) 972RVIMTARGET = $(RVIMNAME)$(LNKEXT) 973RVIEWNAME = r$(VIEWNAME) 974RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 975RGVIMNAME = r$(GVIMNAME) 976RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 977RGVIEWNAME = r$(GVIEWNAME) 978RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 979VIMDIFFNAME = $(VIMNAME)diff 980GVIMDIFFNAME = g$(VIMDIFFNAME) 981VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 982GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 983EVIMNAME = e$(VIMNAME) 984EVIMTARGET = $(EVIMNAME)$(LNKEXT) 985EVIEWNAME = e$(VIEWNAME) 986EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 987 988### Names of the tools that are also made {{{1 989TOOLS = xxd/xxd$(EXEEXT) 990 991### Installation directories. The defaults come from configure. {{{1 992# 993### prefix the top directory for the data (default "/usr/local") 994# 995# Uncomment the next line to install Vim in your home directory. 996#prefix = $(HOME) 997 998### exec_prefix is the top directory for the executable (default $(prefix)) 999# 1000# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 1001#exec_prefix = /usr/machine 1002 1003### BINDIR dir for the executable (default "$(exec_prefix)/bin") 1004### MANDIR dir for the manual pages (default "$(prefix)/man") 1005### DATADIR dir for the other files (default "$(prefix)/lib" or 1006# "$(prefix)/share") 1007# They may be different when using different architectures for the 1008# executable and a common directory for the other files. 1009# 1010# Uncomment the next line to install Vim in "/usr/bin" 1011#BINDIR = /usr/bin 1012# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1013#MANDIR = /usr/share/man 1014# Uncomment the next line to install Vim help files in "/usr/share/vim" 1015#DATADIR = /usr/share 1016 1017### DESTDIR root of the installation tree. This is prepended to the other 1018# directories. This directory must exist. 1019#DESTDIR = ~/pkg/vim 1020 1021### Directory of the man pages 1022MAN1DIR = /man1 1023 1024### Vim version (adjusted by a script) 1025VIMMAJOR = 8 1026VIMMINOR = 0 1027 1028### Location of Vim files (should not need to be changed, and {{{1 1029### some things might not work when they are changed!) 1030VIMDIR = /vim 1031VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1032HELPSUBDIR = /doc 1033COLSUBDIR = /colors 1034SYNSUBDIR = /syntax 1035INDSUBDIR = /indent 1036AUTOSUBDIR = /autoload 1037PLUGSUBDIR = /plugin 1038FTPLUGSUBDIR = /ftplugin 1039LANGSUBDIR = /lang 1040COMPSUBDIR = /compiler 1041KMAPSUBDIR = /keymap 1042MACROSUBDIR = /macros 1043PACKSUBDIR = /pack 1044TOOLSSUBDIR = /tools 1045TUTORSUBDIR = /tutor 1046SPELLSUBDIR = /spell 1047PRINTSUBDIR = /print 1048PODIR = po 1049 1050### VIMLOC common root of the Vim files (all versions) 1051### VIMRTLOC common root of the runtime Vim files (this version) 1052### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1053### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1054### HELPSUBLOC location for help files 1055### COLSUBLOC location for colorscheme files 1056### SYNSUBLOC location for syntax files 1057### INDSUBLOC location for indent files 1058### AUTOSUBLOC location for standard autoload files 1059### PLUGSUBLOC location for standard plugin files 1060### FTPLUGSUBLOC location for ftplugin files 1061### LANGSUBLOC location for language files 1062### COMPSUBLOC location for compiler files 1063### KMAPSUBLOC location for keymap files 1064### MACROSUBLOC location for macro files 1065### PACKSUBLOC location for packages 1066### TOOLSSUBLOC location for tools files 1067### TUTORSUBLOC location for tutor files 1068### SPELLSUBLOC location for spell files 1069### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1070### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1071### You can override these if you want to install them somewhere else. 1072### Edit feature.h for compile-time settings. 1073VIMLOC = $(DATADIR)$(VIMDIR) 1074VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1075VIMRCLOC = $(VIMLOC) 1076HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1077COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1078SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1079INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1080AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1081PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1082FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1083LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1084COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1085KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1086MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1087PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1088TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1089TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1090SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1091PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1092SCRIPTLOC = $(VIMRTLOC) 1093 1094### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1095### the runtime directory is not below it. 1096#VIMRUNTIMEDIR = $(VIMRTLOC) 1097 1098### Name of the defaults/evim/mswin file target. 1099VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1100EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1101MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1102 1103### Name of the menu file target. 1104SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1105SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1106SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1107 1108### Name of the bugreport file target. 1109SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1110 1111### Name of the rgb.txt file target. 1112SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1113 1114### Name of the file type detection file target. 1115SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1116 1117### Name of the file type detection file target. 1118SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1119 1120### Name of the file type detection script file target. 1121SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1122 1123### Name of the ftplugin-on file target. 1124SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1125 1126### Name of the ftplugin-off file target. 1127SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1128 1129### Name of the indent-on file target. 1130SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1131 1132### Name of the indent-off file target. 1133SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1134 1135### Name of the option window script file target. 1136SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1137 1138# Program to install the program in the target directory. Could also be "mv". 1139INSTALL_PROG = cp 1140 1141# Program to install the data in the target directory. Cannot be "mv"! 1142INSTALL_DATA = cp 1143INSTALL_DATA_R = cp -r 1144 1145### Program to run on installed binary. Use the second one to disable strip. 1146#STRIP = strip 1147#STRIP = /bin/true 1148 1149### Permissions for binaries {{{1 1150BINMOD = 755 1151 1152### Permissions for man page 1153MANMOD = 644 1154 1155### Permissions for help files 1156HELPMOD = 644 1157 1158### Permissions for Perl and shell scripts 1159SCRIPTMOD = 755 1160 1161### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1162VIMSCRIPTMOD = 644 1163 1164### Permissions for all directories that are created 1165DIRMOD = 755 1166 1167### Permissions for all other files that are created 1168FILEMOD = 644 1169 1170# Where to copy the man and help files from 1171HELPSOURCE = ../runtime/doc 1172 1173# Where to copy the script files from (menu, bugreport) 1174SCRIPTSOURCE = ../runtime 1175 1176# Where to copy the colorscheme files from 1177COLSOURCE = ../runtime/colors 1178 1179# Where to copy the syntax files from 1180SYNSOURCE = ../runtime/syntax 1181 1182# Where to copy the indent files from 1183INDSOURCE = ../runtime/indent 1184 1185# Where to copy the standard plugin files from 1186AUTOSOURCE = ../runtime/autoload 1187 1188# Where to copy the standard plugin files from 1189PLUGSOURCE = ../runtime/plugin 1190 1191# Where to copy the ftplugin files from 1192FTPLUGSOURCE = ../runtime/ftplugin 1193 1194# Where to copy the macro files from 1195MACROSOURCE = ../runtime/macros 1196 1197# Where to copy the package files from 1198PACKSOURCE = ../runtime/pack 1199 1200# Where to copy the tools files from 1201TOOLSSOURCE = ../runtime/tools 1202 1203# Where to copy the tutor files from 1204TUTORSOURCE = ../runtime/tutor 1205 1206# Where to copy the spell files from 1207SPELLSOURCE = ../runtime/spell 1208 1209# Where to look for language specific files 1210LANGSOURCE = ../runtime/lang 1211 1212# Where to look for compiler files 1213COMPSOURCE = ../runtime/compiler 1214 1215# Where to look for keymap files 1216KMAPSOURCE = ../runtime/keymap 1217 1218# Where to look for print resource files 1219PRINTSOURCE = ../runtime/print 1220 1221# If you are using Linux, you might want to use this to make vim the 1222# default vi editor, it will create a link from vi to Vim when doing 1223# "make install". An existing file will be overwritten! 1224# When not using it, some make programs can't handle an undefined $(LINKIT). 1225#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1226LINKIT = @echo >/dev/null 1227 1228### 1229### GRAPHICAL USER INTERFACE (GUI). {{{1 1230### 'configure --enable-gui' can enable one of these for you if you did set 1231### a corresponding CONF_OPT_GUI above and have X11. 1232### Override configures choice by uncommenting all the following lines. 1233### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1234### for enabling the Athena or Motif GUI. 1235#GUI_SRC = $(NONE_SRC) 1236#GUI_OBJ = $(NONE_OBJ) 1237#GUI_DEFS = $(NONE_DEFS) 1238#GUI_IPATH = $(NONE_IPATH) 1239#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1240#GUI_LIBS1 = $(NONE_LIBS1) 1241#GUI_LIBS2 = $(NONE_LIBS2) 1242#GUI_INSTALL = $(NONE_INSTALL) 1243#GUI_TARGETS = $(NONE_TARGETS) 1244#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1245#GUI_TESTTARGET = $(NONE_TESTTARGET) 1246#GUI_BUNDLE = $(NONE_BUNDLE) 1247 1248# Without a GUI install the normal way. 1249NONE_INSTALL = install_normal 1250 1251### GTK GUI 1252GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1253 gui_beval.c $(GRESOURCE_SRC) 1254GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1255 objects/pty.o objects/gui_gtk_f.o \ 1256 objects/gui_beval.o $(GRESOURCE_OBJ) 1257GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1258GTK_IPATH = $(GUI_INC_LOC) 1259GTK_LIBS_DIR = $(GUI_LIB_LOC) 1260GTK_LIBS1 = 1261GTK_LIBS2 = $(GTK_LIBNAME) 1262GTK_INSTALL = install_normal install_gui_extra 1263GTK_TARGETS = installglinks 1264GTK_MAN_TARGETS = yes 1265GTK_TESTTARGET = gui 1266GTK_BUNDLE = 1267 1268### Motif GUI 1269MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1270 gui_xmdlg.c gui_xmebw.c 1271MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1272 objects/pty.o objects/gui_beval.o \ 1273 objects/gui_xmdlg.o objects/gui_xmebw.o 1274MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1275MOTIF_IPATH = $(GUI_INC_LOC) 1276MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1277MOTIF_LIBS1 = 1278MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1279MOTIF_INSTALL = install_normal install_gui_extra 1280MOTIF_TARGETS = installglinks 1281MOTIF_MAN_TARGETS = yes 1282MOTIF_TESTTARGET = gui 1283MOTIF_BUNDLE = 1284 1285### Athena GUI 1286### Use Xaw3d to make the menus look a little bit nicer 1287#XAW_LIB = -lXaw3d 1288XAW_LIB = -lXaw 1289 1290### When using Xaw3d, uncomment/comment the following lines to also get the 1291### scrollbars from Xaw3d. 1292#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1293#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1294# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1295#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1296# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1297# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1298ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1299 gui_at_sb.c gui_at_fs.c 1300ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1301 objects/pty.o objects/gui_beval.o \ 1302 objects/gui_at_sb.o objects/gui_at_fs.o 1303ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1304 1305ATHENA_IPATH = $(GUI_INC_LOC) 1306ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1307ATHENA_LIBS1 = $(XAW_LIB) 1308ATHENA_LIBS2 = -lXt 1309ATHENA_INSTALL = install_normal install_gui_extra 1310ATHENA_TARGETS = installglinks 1311ATHENA_MAN_TARGETS = yes 1312ATHENA_TESTTARGET = gui 1313ATHENA_BUNDLE = 1314 1315### neXtaw GUI 1316NEXTAW_LIB = -lneXtaw 1317 1318NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1319NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1320 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1321NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1322 1323NEXTAW_IPATH = $(GUI_INC_LOC) 1324NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1325NEXTAW_LIBS1 = $(NEXTAW_LIB) 1326NEXTAW_LIBS2 = -lXt 1327NEXTAW_INSTALL = install_normal install_gui_extra 1328NEXTAW_TARGETS = installglinks 1329NEXTAW_MAN_TARGETS = yes 1330NEXTAW_TESTTARGET = gui 1331NEXTAW_BUNDLE = 1332 1333### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1334# errors: ld: Undefined symbol 1335# _get_wmShellWidgetClass 1336# _get_applicationShellWidgetClass 1337# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1338# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1339#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1340# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1341# too: 1342#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1343 1344# PHOTON GUI 1345PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1346PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1347PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1348PHOTONGUI_IPATH = 1349PHOTONGUI_LIBS_DIR = 1350PHOTONGUI_LIBS1 = -lph -lphexlib 1351PHOTONGUI_LIBS2 = 1352PHOTONGUI_INSTALL = install_normal install_gui_extra 1353PHOTONGUI_TARGETS = installglinks 1354PHOTONGUI_MAN_TARGETS = yes 1355PHOTONGUI_TESTTARGET = gui 1356PHOTONGUI_BUNDLE = 1357 1358# CARBON GUI 1359CARBONGUI_SRC = gui.c gui_mac.c 1360CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1361CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1362 -Wall -Wno-unknown-pragmas \ 1363 -mdynamic-no-pic -pipe 1364CARBONGUI_IPATH = -I. -Iproto 1365CARBONGUI_LIBS_DIR = 1366CARBONGUI_LIBS1 = -framework Carbon 1367CARBONGUI_LIBS2 = 1368CARBONGUI_INSTALL = install_macosx 1369CARBONGUI_TARGETS = 1370CARBONGUI_MAN_TARGETS = 1371CARBONGUI_TESTTARGET = gui 1372CARBONGUI_BUNDLE = gui_bundle 1373APPDIR = $(VIMNAME).app 1374CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1375 1376# All GUI files 1377ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1378ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1379 1380# }}} 1381 1382TERM_DEPS = \ 1383 libvterm/include/vterm.h \ 1384 libvterm/include/vterm_keycodes.h \ 1385 libvterm/src/rect.h \ 1386 libvterm/src/utf8.h \ 1387 libvterm/src/vterm_internal.h 1388 1389### Command to create dependencies based on #include "..." 1390### prototype headers are ignored due to -DPROTO, system 1391### headers #include <...> are ignored if we use the -MM option, as 1392### e.g. provided by gcc-cpp. 1393### Include FEAT_GUI to get dependency on gui.h 1394### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1395CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1396 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1397 1398# flags for cproto 1399# This is for cproto 3 patchlevel 8 or below 1400# __inline, __attribute__ and __extension__ are not recognized by cproto 1401# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1402#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1403# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1404# -D__extension__= -D__restrict="" \ 1405# -D__gnuc_va_list=char -D__builtin_va_list=char 1406 1407# 1408# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1409# __inline and __attribute__ are now recognized by cproto 1410# -D"foo()=" is not supported by all compilers so do not use it 1411NO_ATTR= 1412# 1413# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1414# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1415# 1416# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1417PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1418 1419 1420################################################ 1421## no changes required below this line ## 1422################################################ 1423 1424SHELL = /bin/sh 1425 1426# We would normally use "mkdir -p" but it doesn't work properly everywhere. 1427# Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" 1428# directory. Always use the install-sh script, it's slower but reliable. 1429MKDIR_P = $(SHELL) install-sh -c -d 1430 1431.SUFFIXES: 1432.SUFFIXES: .c .o .pro 1433 1434PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1435POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1436 1437ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CLFAGS) $(POST_DEFS) 1438 1439# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1440# with "-E". 1441OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1442 1443LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(TCL_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1444 1445LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1446 1447DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1448 1449# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1450# needed by racket. 1451ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1452ALL_LIBS = \ 1453 $(GUI_LIBS1) \ 1454 $(GUI_X_LIBS) \ 1455 $(GUI_LIBS2) \ 1456 $(X_PRE_LIBS) \ 1457 $(X_LIBS) \ 1458 $(X_EXTRA_LIBS) \ 1459 $(MZSCHEME_LIBS) \ 1460 $(LIBS) \ 1461 $(EXTRA_LIBS) \ 1462 $(LUA_LIBS) \ 1463 $(PERL_LIBS) \ 1464 $(PYTHON_LIBS) \ 1465 $(PYTHON3_LIBS) \ 1466 $(TCL_LIBS) \ 1467 $(RUBY_LIBS) \ 1468 $(PROFILE_LIBS) \ 1469 $(SANITIZER_LIBS) \ 1470 $(LEAK_LIBS) 1471 1472# abbreviations 1473DEST_BIN = $(DESTDIR)$(BINDIR) 1474DEST_VIM = $(DESTDIR)$(VIMLOC) 1475DEST_RT = $(DESTDIR)$(VIMRTLOC) 1476DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1477DEST_COL = $(DESTDIR)$(COLSUBLOC) 1478DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1479DEST_IND = $(DESTDIR)$(INDSUBLOC) 1480DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1481DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1482DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1483DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1484DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1485DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1486DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1487DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1488DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1489DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1490DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1491DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1492DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1493DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1494 1495# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1496# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1497# directory first. 1498# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1499DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1500DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1501DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1502DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1503DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1504DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1505DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1506DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1507DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1508DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1509DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1510DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1511DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1512 1513# BASIC_SRC: files that are always used 1514# GUI_SRC: extra GUI files for current configuration 1515# ALL_GUI_SRC: all GUI files for Unix 1516# 1517# SRC: files used for current configuration 1518# TAGS_SRC: source files used for make tags 1519# TAGS_INCL: include files used for make tags 1520# ALL_SRC: source files used for make depend and make lint 1521 1522TAGS_INCL = *.h 1523 1524BASIC_SRC = \ 1525 arabic.c \ 1526 blowfish.c \ 1527 buffer.c \ 1528 charset.c \ 1529 crypt.c \ 1530 crypt_zip.c \ 1531 dict.c \ 1532 diff.c \ 1533 digraph.c \ 1534 edit.c \ 1535 eval.c \ 1536 evalfunc.c \ 1537 ex_cmds.c \ 1538 ex_cmds2.c \ 1539 ex_docmd.c \ 1540 ex_eval.c \ 1541 ex_getln.c \ 1542 farsi.c \ 1543 fileio.c \ 1544 fold.c \ 1545 getchar.c \ 1546 hardcopy.c \ 1547 hashtab.c \ 1548 if_cscope.c \ 1549 if_xcmdsrv.c \ 1550 json.c \ 1551 list.c \ 1552 main.c \ 1553 mark.c \ 1554 memfile.c \ 1555 memline.c \ 1556 menu.c \ 1557 message.c \ 1558 misc1.c \ 1559 misc2.c \ 1560 move.c \ 1561 mbyte.c \ 1562 normal.c \ 1563 ops.c \ 1564 option.c \ 1565 os_unix.c \ 1566 auto/pathdef.c \ 1567 popupmnu.c \ 1568 quickfix.c \ 1569 regexp.c \ 1570 screen.c \ 1571 search.c \ 1572 sha256.c \ 1573 spell.c \ 1574 spellfile.c \ 1575 syntax.c \ 1576 tag.c \ 1577 term.c \ 1578 terminal.c \ 1579 ui.c \ 1580 undo.c \ 1581 userfunc.c \ 1582 version.c \ 1583 window.c \ 1584 $(OS_EXTRA_SRC) 1585 1586SRC = $(BASIC_SRC) \ 1587 $(GUI_SRC) \ 1588 $(TERM_SRC) \ 1589 $(HANGULIN_SRC) \ 1590 $(LUA_SRC) \ 1591 $(MZSCHEME_SRC) \ 1592 $(PERL_SRC) \ 1593 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1594 $(TCL_SRC) \ 1595 $(RUBY_SRC) \ 1596 $(WORKSHOP_SRC) \ 1597 $(WSDEBUG_SRC) 1598 1599TAGS_SRC = *.c *.cpp if_perl.xs 1600 1601EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1602 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1603 gui_beval.c workshop.c wsdebug.c integration.c \ 1604 netbeans.c channel.c \ 1605 $(GRESOURCE_SRC) 1606 1607# Unittest files 1608JSON_TEST_SRC = json_test.c 1609JSON_TEST_TARGET = json_test$(EXEEXT) 1610KWORD_TEST_SRC = kword_test.c 1611KWORD_TEST_TARGET = kword_test$(EXEEXT) 1612MEMFILE_TEST_SRC = memfile_test.c 1613MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1614MESSAGE_TEST_SRC = message_test.c 1615MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1616 1617UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1618UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1619RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1620 1621# All sources, also the ones that are not configured 1622ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) $(EXTRA_SRC) 1623 1624# Which files to check with lint. Select one of these three lines. ALL_SRC 1625# checks more, but may not work well for checking a GUI that wasn't configured. 1626# The perl sources also don't work well with lint. 1627LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1628 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1629 $(WORKSHOP_SRC) $(WSDEBUG_SRC) \ 1630 $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) 1631#LINT_SRC = $(SRC) 1632#LINT_SRC = $(ALL_SRC) 1633#LINT_SRC = $(BASIC_SRC) 1634 1635OBJ_COMMON = \ 1636 objects/arabic.o \ 1637 objects/buffer.o \ 1638 objects/blowfish.o \ 1639 objects/crypt.o \ 1640 objects/crypt_zip.o \ 1641 objects/dict.o \ 1642 objects/diff.o \ 1643 objects/digraph.o \ 1644 objects/edit.o \ 1645 objects/eval.o \ 1646 objects/evalfunc.o \ 1647 objects/ex_cmds.o \ 1648 objects/ex_cmds2.o \ 1649 objects/ex_docmd.o \ 1650 objects/ex_eval.o \ 1651 objects/ex_getln.o \ 1652 objects/farsi.o \ 1653 objects/fileio.o \ 1654 objects/fold.o \ 1655 objects/getchar.o \ 1656 objects/hardcopy.o \ 1657 objects/hashtab.o \ 1658 $(HANGULIN_OBJ) \ 1659 objects/if_cscope.o \ 1660 objects/if_xcmdsrv.o \ 1661 objects/list.o \ 1662 objects/mark.o \ 1663 objects/memline.o \ 1664 objects/menu.o \ 1665 objects/misc1.o \ 1666 objects/misc2.o \ 1667 objects/move.o \ 1668 objects/mbyte.o \ 1669 objects/normal.o \ 1670 objects/ops.o \ 1671 objects/option.o \ 1672 objects/os_unix.o \ 1673 objects/pathdef.o \ 1674 objects/popupmnu.o \ 1675 objects/quickfix.o \ 1676 objects/regexp.o \ 1677 objects/screen.o \ 1678 objects/search.o \ 1679 objects/sha256.o \ 1680 objects/spell.o \ 1681 objects/spellfile.o \ 1682 objects/syntax.o \ 1683 objects/tag.o \ 1684 objects/term.o \ 1685 objects/terminal.o \ 1686 objects/ui.o \ 1687 objects/undo.o \ 1688 objects/userfunc.o \ 1689 objects/version.o \ 1690 objects/window.o \ 1691 $(GUI_OBJ) \ 1692 $(TERM_OBJ) \ 1693 $(LUA_OBJ) \ 1694 $(MZSCHEME_OBJ) \ 1695 $(PERL_OBJ) \ 1696 $(PYTHON_OBJ) \ 1697 $(PYTHON3_OBJ) \ 1698 $(TCL_OBJ) \ 1699 $(RUBY_OBJ) \ 1700 $(OS_EXTRA_OBJ) \ 1701 $(WORKSHOP_OBJ) \ 1702 $(NETBEANS_OBJ) \ 1703 $(CHANNEL_OBJ) \ 1704 $(WSDEBUG_OBJ) 1705 1706# The files included by tests are not in OBJ_COMMON. 1707OBJ_MAIN = \ 1708 objects/charset.o \ 1709 objects/json.o \ 1710 objects/main.o \ 1711 objects/memfile.o \ 1712 objects/message.o 1713 1714OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1715 1716OBJ_JSON_TEST = \ 1717 objects/charset.o \ 1718 objects/memfile.o \ 1719 objects/message.o \ 1720 objects/json_test.o 1721 1722JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1723 1724OBJ_KWORD_TEST = \ 1725 objects/json.o \ 1726 objects/memfile.o \ 1727 objects/message.o \ 1728 objects/kword_test.o 1729 1730KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1731 1732OBJ_MEMFILE_TEST = \ 1733 objects/charset.o \ 1734 objects/json.o \ 1735 objects/message.o \ 1736 objects/memfile_test.o 1737 1738MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1739 1740OBJ_MESSAGE_TEST = \ 1741 objects/charset.o \ 1742 objects/json.o \ 1743 objects/memfile.o \ 1744 objects/message_test.o 1745 1746MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1747 1748ALL_OBJ = $(OBJ_COMMON) \ 1749 $(OBJ_MAIN) \ 1750 $(OBJ_JSON_TEST) \ 1751 $(OBJ_KWORD_TEST) \ 1752 $(OBJ_MEMFILE_TEST) \ 1753 $(OBJ_MESSAGE_TEST) 1754 1755 1756PRO_AUTO = \ 1757 arabic.pro \ 1758 blowfish.pro \ 1759 buffer.pro \ 1760 charset.pro \ 1761 crypt.pro \ 1762 crypt_zip.pro \ 1763 dict.pro \ 1764 diff.pro \ 1765 digraph.pro \ 1766 edit.pro \ 1767 eval.pro \ 1768 evalfunc.pro \ 1769 ex_cmds.pro \ 1770 ex_cmds2.pro \ 1771 ex_docmd.pro \ 1772 ex_eval.pro \ 1773 ex_getln.pro \ 1774 farsi.pro \ 1775 fileio.pro \ 1776 fold.pro \ 1777 getchar.pro \ 1778 hardcopy.pro \ 1779 hashtab.pro \ 1780 hangulin.pro \ 1781 if_cscope.pro \ 1782 if_lua.pro \ 1783 if_mzsch.pro \ 1784 if_python.pro \ 1785 if_python3.pro \ 1786 if_ruby.pro \ 1787 if_xcmdsrv.pro \ 1788 json.pro \ 1789 list.pro \ 1790 main.pro \ 1791 mark.pro \ 1792 mbyte.pro \ 1793 memfile.pro \ 1794 memline.pro \ 1795 menu.pro \ 1796 message.pro \ 1797 misc1.pro \ 1798 misc2.pro \ 1799 move.pro \ 1800 normal.pro \ 1801 ops.pro \ 1802 option.pro \ 1803 os_mac_conv.pro \ 1804 os_unix.pro \ 1805 popupmnu.pro \ 1806 pty.pro \ 1807 quickfix.pro \ 1808 regexp.pro \ 1809 screen.pro \ 1810 search.pro \ 1811 sha256.pro \ 1812 spell.pro \ 1813 spellfile.pro \ 1814 syntax.pro \ 1815 tag.pro \ 1816 term.pro \ 1817 terminal.pro \ 1818 termlib.pro \ 1819 ui.pro \ 1820 undo.pro \ 1821 userfunc.pro \ 1822 version.pro \ 1823 window.pro \ 1824 gui_beval.pro \ 1825 workshop.pro \ 1826 netbeans.pro \ 1827 channel.pro \ 1828 $(ALL_GUI_PRO) \ 1829 $(TCL_PRO) 1830 1831# Resources used for the Mac are in one directory. 1832RSRC_DIR = os_mac_rsrc 1833 1834PRO_MANUAL = os_amiga.pro os_win32.pro \ 1835 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1836 1837# Default target is making the executable and tools 1838all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1839 1840tools: $(TOOLS) 1841 1842# Run configure with all the setting from above. 1843# 1844# Note: auto/config.h doesn't depend on configure, because running configure 1845# doesn't always update auto/config.h. The timestamp isn't changed if the 1846# file contents didn't change (to avoid recompiling everything). Including a 1847# dependency on auto/config.h would cause running configure each time when 1848# auto/config.h isn't updated. The dependency on auto/config.mk should make 1849# sure configure is run when it's needed. 1850# 1851# Remove the config.cache every time, once in a while it causes problems that 1852# are very hard to figure out. 1853# 1854config auto/config.mk: auto/configure config.mk.in config.h.in 1855 -rm -f auto/config.cache 1856 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1857 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1858 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1859 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1860 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1861 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1862 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1863 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1864 $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1865 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1866 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1867 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1868 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1869 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1870 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1871 $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ 1872 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1873 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1874 $(CONF_OPT_SYSMOUSE); \ 1875 fi 1876 1877# Use "make reconfig" to rerun configure without cached values. 1878# When config.h changes, most things will be recompiled automatically. 1879# Invoke $(MAKE) to run config with the empty auto/config.mk. 1880# Invoke $(MAKE) to build all with the filled auto/config.mk. 1881reconfig: scratch clean 1882 $(MAKE) -f Makefile config 1883 $(MAKE) -f Makefile all 1884 1885# Run autoconf to produce auto/configure. 1886# Note: 1887# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1888# producing auto/configure. 1889# - autoconf is not run automatically, because a patch usually changes both 1890# configure.ac and auto/configure but can't update the timestamps. People 1891# who do not have (the correct version of) autoconf would run into trouble. 1892# 1893# Two tricks are required to make autoconf put its output in the "auto" dir: 1894# - Temporarily move the ./configure script to ./configure.save. Don't 1895# overwrite it, it's probably the result of an aborted autoconf. 1896# - Use sed to change ./config.log to auto/config.log in the configure script. 1897# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1898# care of: 1899# - configure.lineno: has the line numbers replaced with $LINENO. That 1900# improves patches a LOT, thus use it instead (until someone says it doesn't 1901# work on some system). 1902# - autom4te.cache directory is created and not cleaned up. Delete it. 1903# - Uses ">config.log" instead of "./config.log". 1904autoconf: 1905 if test ! -f configure.save; then mv configure configure.save; fi 1906 $(AUTOCONF) 1907 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1908 chmod 755 auto/configure 1909 mv -f configure.save configure 1910 -rm -rf autom4te.cache 1911 -rm -f auto/config.status auto/config.cache 1912 1913# Run vim script to generate the Ex command lookup table. 1914# This only needs to be run when a command name has been added or changed. 1915# If this fails because you don't have Vim yet, first build and install Vim 1916# without changes. 1917cmdidxs: ex_cmds.h 1918 vim -u NONE -i NONE -X -S create_cmdidxs.vim 1919 1920 1921# The normal command to compile a .c file to its .o file. 1922# Without or with ALL_CFLAGS. 1923CCC_NF = $(CC) -c -I$(srcdir) 1924CCC = $(CCC_NF) $(ALL_CFLAGS) 1925 1926 1927# Link the target for normal use or debugging. 1928# A shell script is used to try linking without unnecessary libraries. 1929$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1930 $(CCC) version.c -o objects/version.o 1931 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1932 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1933 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1934 sh $(srcdir)/link.sh 1935 1936xxd/xxd$(EXEEXT): xxd/xxd.c 1937 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1938 $(MAKE) -f Makefile 1939 1940# Build the language specific files if they were unpacked. 1941# Generate the converted .mo files separately, it's no problem if this fails. 1942languages: 1943 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1944 cd $(PODIR); \ 1945 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1946 fi 1947 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1948 cd $(PODIR); \ 1949 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1950 fi 1951 1952# Update the *.po files for changes in the sources. Only run manually. 1953update-po: 1954 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1955 1956# Generate function prototypes. This is not needed to compile vim, but if 1957# you want to use it, cproto is out there on the net somewhere -- Webb 1958# 1959# When generating os_amiga.pro and os_win32.pro there will be a 1960# few include files that can not be found, that's OK. 1961 1962proto: $(PRO_AUTO) $(PRO_MANUAL) 1963 1964# Filter out arguments that cproto doesn't support. 1965# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 1966# them as a list of individual flags. 1967# The -E"gcc -E" argument must be separate to avoid problems with shell 1968# quoting. 1969CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1970 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g'` 1971 1972### Would be nice if this would work for "normal" make. 1973### Currently it only works for (Free)BSD make. 1974#$(PRO_AUTO): $$(*F).c 1975# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1976 1977# Always define FEAT_GUI. This may generate a few warnings if it's also 1978# defined in auto/config.h, you can ignore that. 1979.c.pro: 1980 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1981 echo "/* vim: set ft=c : */" >> proto/$@ 1982 1983os_amiga.pro: os_amiga.c 1984 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1985 echo "/* vim: set ft=c : */" >> proto/$@ 1986 1987os_win32.pro: os_win32.c 1988 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1989 echo "/* vim: set ft=c : */" >> proto/$@ 1990 1991os_mswin.pro: os_mswin.c 1992 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1993 echo "/* vim: set ft=c : */" >> proto/$@ 1994 1995winclip.pro: winclip.c 1996 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1997 echo "/* vim: set ft=c : */" >> proto/$@ 1998 1999os_beos.pro: os_beos.c 2000 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 2001 echo "/* vim: set ft=c : */" >> proto/$@ 2002 2003os_vms.pro: os_vms.c 2004# must use os_vms_conf.h for auto/config.h 2005 mv auto/config.h auto/config.h.save 2006 cp os_vms_conf.h auto/config.h 2007 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 2008 echo "/* vim: set ft=c : */" >> proto/$@ 2009 rm auto/config.h 2010 mv auto/config.h.save auto/config.h 2011 2012# if_perl.pro is special: Use the generated if_perl.c for input and remove 2013# prototypes for local functions. 2014if_perl.pro: auto/if_perl.c 2015 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 2016 2017gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2018 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2019 echo "/* vim: set ft=c : */" >> proto/$@ 2020 2021notags: 2022 -rm -f tags 2023 2024# Note: tags is made for the currently configured version, can't include both 2025# Motif and Athena GUI 2026# You can ignore error messages for missing files. 2027tags TAGS: notags 2028 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 2029 2030# Make a highlight file for types. Requires Exuberant ctags and awk 2031types: types.vim 2032types.vim: $(TAGS_SRC) $(TAGS_INCL) 2033 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 2034 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2035 {printf("%s ", $$1)}END{print ""}' > $@ 2036 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2037 2038# TESTING 2039# 2040# Execute the test scripts and the unittests. 2041test check: scripttests unittests 2042 2043# Execute the test scripts. Run these after compiling Vim, before installing. 2044# This doesn't depend on $(VIMTARGET), because that won't work when configure 2045# wasn't run yet. Restart make to build it instead. 2046# 2047# This will produce a lot of garbage on your screen, including a few error 2048# messages. Don't worry about that. 2049# If there is a real error, there will be a difference between "testXX.out" and 2050# a "testXX.ok" file. 2051# If everything is alright, the final message will be "ALL DONE". If not you 2052# get "TEST FAILURE". 2053# 2054scripttests: 2055 $(MAKE) -f Makefile $(VIMTARGET) 2056 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2057 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2058 fi 2059 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2060 ln -s $(VIMTARGET) vim; \ 2061 fi 2062 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2063 2064# Run the tests with the GUI. Assumes vim/gvim was already built 2065testgui: 2066 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2067 2068benchmark: 2069 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2070 2071unittesttargets: 2072 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2073 2074# Execute the unittests one by one. 2075unittest unittests: $(RUN_UNITTESTS) 2076 2077run_json_test: $(JSON_TEST_TARGET) 2078 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2079 2080run_kword_test: $(KWORD_TEST_TARGET) 2081 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2082 2083run_memfile_test: $(MEMFILE_TEST_TARGET) 2084 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2085 2086run_message_test: $(MESSAGE_TEST_TARGET) 2087 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2088 2089# Run individual OLD style test, assuming that Vim was already compiled. 2090test1 \ 2091 test_autocmd_option \ 2092 test_autoformat_join \ 2093 test_changelist \ 2094 test_close_count \ 2095 test_comparators \ 2096 test_erasebackword \ 2097 test_eval \ 2098 test_fixeol \ 2099 test_getcwd \ 2100 test_insertcount \ 2101 test_listchars \ 2102 test_search_mbyte \ 2103 test_wordcount \ 2104 test3 test4 test5 test6 test7 test8 test9 \ 2105 test11 test12 test14 test15 test17 test18 test19 \ 2106 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29 \ 2107 test30 test31 test32 test33 test34 test36 test37 test38 test39 \ 2108 test40 test41 test42 test43 test44 test45 test48 test49 \ 2109 test50 test51 test52 test53 test54 test55 test56 test57 test59 \ 2110 test60 test64 test66 test67 test68 test69 \ 2111 test70 test72 test73 test74 test75 test77 test78 test79 \ 2112 test80 test83 test84 test85 test86 test87 test88 \ 2113 test91 test94 test95 test97 test98 test99 \ 2114 test100 test101 test103 test104 test107 test108: 2115 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2116 2117# Run individual NEW style test, assuming that Vim was already compiled. 2118test_arglist \ 2119 test_arabic \ 2120 test_assert \ 2121 test_assign \ 2122 test_autochdir \ 2123 test_autocmd \ 2124 test_backspace_opt \ 2125 test_breakindent \ 2126 test_bufwintabinfo \ 2127 test_cd \ 2128 test_cdo \ 2129 test_changedtick \ 2130 test_channel \ 2131 test_charsearch \ 2132 test_charsearch_utf8 \ 2133 test_cindent \ 2134 test_clientserver \ 2135 test_cmdline \ 2136 test_command_count \ 2137 test_crypt \ 2138 test_cscope \ 2139 test_cursor_func \ 2140 test_delete \ 2141 test_diffmode \ 2142 test_digraph \ 2143 test_display \ 2144 test_edit \ 2145 test_ex_undo \ 2146 test_ex_z \ 2147 test_execute_func \ 2148 test_expand \ 2149 test_expand_dllpath \ 2150 test_expr \ 2151 test_expr_utf8 \ 2152 test_farsi \ 2153 test_feedkeys \ 2154 test_file_perm \ 2155 test_fileformat \ 2156 test_filetype \ 2157 test_filter_cmd \ 2158 test_filter_map \ 2159 test_findfile \ 2160 test_float_func \ 2161 test_fnameescape \ 2162 test_fnamemodify \ 2163 test_fold \ 2164 test_functions \ 2165 test_ga \ 2166 test_gf \ 2167 test_glob2regpat \ 2168 test_global \ 2169 test_gn \ 2170 test_goto \ 2171 test_gui \ 2172 test_gui_init \ 2173 test_hardcopy \ 2174 test_help \ 2175 test_help_tagjump \ 2176 test_hide \ 2177 test_history \ 2178 test_hlsearch \ 2179 test_increment \ 2180 test_increment_dbcs \ 2181 test_job_fails \ 2182 test_join \ 2183 test_json \ 2184 test_jumps \ 2185 test_lambda \ 2186 test_langmap \ 2187 test_largefile \ 2188 test_lispwords \ 2189 test_listlbr \ 2190 test_listlbr_utf8 \ 2191 test_lua \ 2192 test_makeencoding \ 2193 test_man \ 2194 test_mapping \ 2195 test_marks \ 2196 test_match \ 2197 test_matchadd_conceal \ 2198 test_matchadd_conceal_utf8 \ 2199 test_menu \ 2200 test_messages \ 2201 test_mksession \ 2202 test_mksession_utf8 \ 2203 test_nested_function \ 2204 test_netbeans \ 2205 test_normal \ 2206 test_number \ 2207 test_options \ 2208 test_packadd \ 2209 test_partial \ 2210 test_paste \ 2211 test_perl \ 2212 test_popup \ 2213 test_profile \ 2214 test_put \ 2215 test_python2 \ 2216 test_python3 \ 2217 test_pyx2 \ 2218 test_pyx3 \ 2219 test_quickfix \ 2220 test_quotestar \ 2221 test_recover \ 2222 test_regexp_latin \ 2223 test_regexp_utf8 \ 2224 test_reltime \ 2225 test_retab \ 2226 test_ruby \ 2227 test_search \ 2228 test_searchpos \ 2229 test_set \ 2230 test_sha256 \ 2231 test_signs \ 2232 test_smartindent \ 2233 test_sort \ 2234 test_source_utf8 \ 2235 test_spell \ 2236 test_startup \ 2237 test_startup_utf8 \ 2238 test_stat \ 2239 test_statusline \ 2240 test_substitute \ 2241 test_syn_attr \ 2242 test_syntax \ 2243 test_system \ 2244 test_tabline \ 2245 test_tabpage \ 2246 test_tagcase \ 2247 test_tagjump \ 2248 test_taglist \ 2249 test_tcl \ 2250 test_textobjects \ 2251 test_timers \ 2252 test_true_false \ 2253 test_undo \ 2254 test_unlet \ 2255 test_usercommands \ 2256 test_utf8 \ 2257 test_utf8_comparisons \ 2258 test_viminfo \ 2259 test_vimscript \ 2260 test_visual \ 2261 test_window_cmd \ 2262 test_window_id \ 2263 test_writefile \ 2264 test_alot_latin \ 2265 test_alot_utf8 \ 2266 test_alot: 2267 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile $@.res VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2268 @if test -f testdir/test.log; then \ 2269 cat testdir/test.log; \ 2270 fi 2271 cat testdir/messages 2272 2273newtests: 2274 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2275 @if test -f testdir/test.log; then \ 2276 cat testdir/test.log; \ 2277 fi 2278 cat testdir/messages 2279 2280testclean: 2281 cd testdir; $(MAKE) -f Makefile clean 2282 if test -d $(PODIR); then \ 2283 cd $(PODIR); $(MAKE) checkclean; \ 2284 fi 2285 2286# Unittests 2287# It's build just like Vim to satisfy all dependencies. 2288$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2289 $(CCC) version.c -o objects/version.o 2290 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2291 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2292 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2293 sh $(srcdir)/link.sh 2294 2295$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2296 $(CCC) version.c -o objects/version.o 2297 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2298 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2299 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2300 sh $(srcdir)/link.sh 2301 2302$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2303 $(CCC) version.c -o objects/version.o 2304 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2305 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2306 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2307 sh $(srcdir)/link.sh 2308 2309$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2310 $(CCC) version.c -o objects/version.o 2311 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2312 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2313 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2314 sh $(srcdir)/link.sh 2315 2316# install targets 2317 2318install: $(GUI_INSTALL) 2319 2320install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2321 2322install_gui_extra: installgtutorbin 2323 2324installvim: installvimbin installtutorbin \ 2325 installruntime installlinks installmanlinks 2326 2327# 2328# Avoid overwriting an existing executable, somebody might be running it and 2329# overwriting it could cause it to crash. Deleting it is OK, it won't be 2330# really deleted until all running processes for it have exited. It is 2331# renamed first, in case the deleting doesn't work. 2332# 2333# If you want to keep an older version, rename it before running "make 2334# install". 2335# 2336installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2337 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2338 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2339 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2340 fi 2341 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2342 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2343 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2344# may create a link to the new executable from /usr/bin/vi 2345 -$(LINKIT) 2346 2347# Long list of arguments for the shell script that installs the manual pages 2348# for one language. 2349INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2350 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2351 2352# Install most of the runtime files 2353installruntime: installrtbase installmacros installpack installtutor installspell 2354 2355# install the help files; first adjust the contents for the final location 2356installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2357 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2358 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 2359 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2360 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2361# Generate the help tags with ":helptags" to handle all languages. 2362# Move the distributed tags file aside and restore it, to avoid it being 2363# different from the repository. 2364 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2365 mv -f tags tags.dist; fi 2366 @echo generating help tags 2367 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2368 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2369 cd $(HELPSOURCE); \ 2370 files=`ls *.txt tags`; \ 2371 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2372 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2373 cd $(DEST_HELP); \ 2374 chmod $(HELPMOD) $$files 2375 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2376 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2377 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2378# install the menu files 2379 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2380 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2381 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2382 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2383 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2384 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2385# install the defaults/evim/mswin file 2386 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2387 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2388 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2389 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2390 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2391 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2392# install the rgb.txt file 2393 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2394 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2395# install the bugreport file 2396 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2397 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2398# install the example vimrc files 2399 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2400 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2401 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2402 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2403# install the file type detection files 2404 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2405 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2406 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2407 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2408 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2409 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2410 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2411 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2412 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2413 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2414 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2415 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2416 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2417 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2418 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2419 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2420# install the print resource files 2421 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2422 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2423# install the colorscheme files 2424 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 2425 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 2426# install the syntax files 2427 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2428 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2429# install the indent files 2430 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2431 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2432# install the standard autoload files 2433 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2434 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2435 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2436 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2437# install the standard plugin files 2438 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2439 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2440# install the ftplugin files 2441 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2442 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2443# install the compiler files 2444 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2445 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2446 2447installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2448 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2449 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2450 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2451 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2452# When using CVS some CVS directories might have been copied. 2453# Also delete AAPDIR and *.info files. 2454 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2455 if test -n "$$cvs"; then \ 2456 rm -rf $$cvs; \ 2457 fi 2458 2459installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2460 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2461 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2462 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2463 2464# install the tutor files 2465installtutorbin: $(DEST_VIM) 2466 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2467 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2468 2469installgtutorbin: $(DEST_VIM) 2470 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2471 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2472 2473installtutor: $(DEST_RT) $(DEST_TUTOR) 2474 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2475 -rm -f $(DEST_TUTOR)/*.info 2476 chmod $(HELPMOD) $(DEST_TUTOR)/* 2477 2478# Install the spell files, if they exist. This assumes at least the English 2479# spell file is there. 2480installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2481 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2482 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2483 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2484 fi 2485 2486# install helper program xxd 2487installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2488 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2489 $(INSTALL_TOOL_LANGS) 2490 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2491 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2492 rm -f $(DEST_BIN)/xxd.rm; \ 2493 fi 2494 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2495 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2496 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2497 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2498 2499# install the runtime tools 2500 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2501# When using CVS some CVS directories might have been copied. 2502 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2503 if test -n "$$cvs"; then \ 2504 rm -rf $$cvs; \ 2505 fi 2506 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2507# replace the path in some tools 2508 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2509 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2510 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2511 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2512 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2513 2514# install the language specific files for tools, if they were unpacked 2515install-tool-languages: 2516 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2517 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2518 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2519 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2520 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2521 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2522 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2523 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2524 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2525 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2526 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2527 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2528 2529# install the language specific files, if they were unpacked 2530install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2531 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2532 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2533 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2534 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2535 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2536 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2537 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2538 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2539 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2540 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2541 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2542 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2543 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2544 $(DEST_MAN_FR) $(INSTALLMLARGS) 2545 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2546 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2547 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2548 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2549 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2550 $(DEST_MAN_IT) $(INSTALLMLARGS) 2551 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2552 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2553 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2554 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2555 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2556 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2557 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2558 $(DEST_MAN_PL) $(INSTALLMLARGS) 2559 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2560 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2561 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2562 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2563 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2564 $(DEST_MAN_RU) $(INSTALLMLARGS) 2565 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2566 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2567 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2568 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2569 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2570 fi 2571 if test -d $(LANGSOURCE); then \ 2572 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2573 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2574 fi 2575 if test -d $(KMAPSOURCE); then \ 2576 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2577 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2578 fi 2579 2580# Install the icons for KDE, if the directory exists and the icon doesn't. 2581# Always when $(DESTDIR) is not empty. 2582ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2583ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2584ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2585ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2586DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2587KDEPATH = $(HOME)/.kde/share/icons 2588install-icons: 2589 if test -n "$(DESTDIR)"; then \ 2590 $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ 2591 $(ICON16PATH) $(DESKTOPPATH); \ 2592 fi 2593 2594 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2595 -a ! -f $(ICON48PATH)/gvim.png; then \ 2596 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2597 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2598 -a -w $(ICONTHEMEPATH) \ 2599 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2600 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2601 fi \ 2602 fi 2603 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2604 -a ! -f $(ICON32PATH)/gvim.png; then \ 2605 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2606 fi 2607 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2608 -a ! -f $(ICON16PATH)/gvim.png; then \ 2609 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2610 fi 2611 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2612 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2613 $(SCRIPTSOURCE)/gvim.desktop \ 2614 $(DESKTOPPATH); \ 2615 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2616 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2617 fi \ 2618 fi 2619 2620$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2621 @echo Runtime files not found. 2622 @echo You need to unpack the runtime archive before running "make install". 2623 test -f error 2624 2625$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2626 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2627 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2628 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2629 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2630 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2631 $(MKDIR_P) $@ 2632 -chmod $(DIRMOD) $@ 2633 2634# create links from various names to vim. This is only done when the links 2635# (or executables with the same name) don't exist yet. 2636installlinks: $(GUI_TARGETS) \ 2637 $(DEST_BIN)/$(EXTARGET) \ 2638 $(DEST_BIN)/$(VIEWTARGET) \ 2639 $(DEST_BIN)/$(RVIMTARGET) \ 2640 $(DEST_BIN)/$(RVIEWTARGET) \ 2641 $(INSTALLVIMDIFF) 2642 2643installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2644 $(DEST_BIN)/$(GVIEWTARGET) \ 2645 $(DEST_BIN)/$(RGVIMTARGET) \ 2646 $(DEST_BIN)/$(RGVIEWTARGET) \ 2647 $(DEST_BIN)/$(EVIMTARGET) \ 2648 $(DEST_BIN)/$(EVIEWTARGET) \ 2649 $(INSTALLGVIMDIFF) 2650 2651installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2652installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2653 2654$(DEST_BIN)/$(EXTARGET): 2655 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2656 2657$(DEST_BIN)/$(VIEWTARGET): 2658 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2659 2660$(DEST_BIN)/$(GVIMTARGET): 2661 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2662 2663$(DEST_BIN)/$(GVIEWTARGET): 2664 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2665 2666$(DEST_BIN)/$(RVIMTARGET): 2667 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2668 2669$(DEST_BIN)/$(RVIEWTARGET): 2670 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2671 2672$(DEST_BIN)/$(RGVIMTARGET): 2673 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2674 2675$(DEST_BIN)/$(RGVIEWTARGET): 2676 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2677 2678$(DEST_BIN)/$(VIMDIFFTARGET): 2679 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2680 2681$(DEST_BIN)/$(GVIMDIFFTARGET): 2682 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2683 2684$(DEST_BIN)/$(EVIMTARGET): 2685 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2686 2687$(DEST_BIN)/$(EVIEWTARGET): 2688 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2689 2690# Create links for the manual pages with various names to vim. This is only 2691# done when the links (or manpages with the same name) don't exist yet. 2692 2693INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2694 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2695 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2696 $(GVIMDIFFNAME) $(EVIEWNAME) 2697 2698installmanlinks: 2699 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2700 $(DEST_MAN) $(INSTALLMLARGS) 2701 2702uninstall: uninstall_runtime 2703 -rm -f $(DEST_BIN)/$(VIMTARGET) 2704 -rm -f $(DEST_BIN)/vimtutor 2705 -rm -f $(DEST_BIN)/gvimtutor 2706 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2707 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2708 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2709 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2710 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2711 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2712 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2713 2714# Note: the "rmdir" will fail if any files were added after "make install" 2715uninstall_runtime: 2716 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2717 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2718 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2719 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2720 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2721 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2722 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2723 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2724 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2725 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2726 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2727 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2728 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2729 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2730 $(DEST_MAN) $(INSTALLMLARGS) 2731 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2732 $(DEST_MAN_FR) $(INSTALLMLARGS) 2733 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2734 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2735 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2736 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2737 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2738 $(DEST_MAN_IT) $(INSTALLMLARGS) 2739 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2740 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2741 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2742 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2743 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2744 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2745 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2746 $(DEST_MAN_PL) $(INSTALLMLARGS) 2747 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2748 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2749 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2750 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2751 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2752 $(DEST_MAN_RU) $(INSTALLMLARGS) 2753 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2754 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2755 -rm -f $(DEST_MAN)/xxd.1 2756 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2757 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2758 -rm -f $(DEST_MAN_JA_U)/xxd.1 2759 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2760 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2761 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2762 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2763 -rm -f $(SYS_RGB_FILE) 2764 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2765 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2766 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2767 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2768 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2769 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2770 -rm -f $(SYS_OPTWIN_FILE) 2771 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2772 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2773 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2774 -rm -rf $(DEST_MACRO) 2775 -rm -rf $(DEST_PACK) 2776 -rm -rf $(DEST_TUTOR) 2777 -rm -rf $(DEST_SPELL) 2778 -rm -rf $(DEST_TOOLS) 2779 -rm -rf $(DEST_LANG) 2780 -rm -rf $(DEST_KMAP) 2781 -rm -rf $(DEST_COMP) 2782 -rm -f $(DEST_PRINT)/*.ps 2783 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2784 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2785 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2786 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2787 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2788# This will fail when other Vim versions are installed, no worries. 2789 -rmdir $(DEST_VIM) 2790 2791# Clean up all the files that have been produced, except configure's. 2792# We support common typing mistakes for Juergen! :-) 2793clean celan: testclean 2794 -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2795 -rm -rf objects 2796 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2797 -rm -f conftest* *~ auto/link.sed 2798 -rm -f testdir/opt_test.vim 2799 -rm -f $(UNITTEST_TARGETS) 2800 -rm -f runtime pixmaps 2801 -rm -rf $(APPDIR) 2802 -rm -rf mzscheme_base.c 2803 if test -d $(PODIR); then \ 2804 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2805 fi 2806 2807# Make a shadow directory for compilation on another system or with different 2808# features. 2809SHADOWDIR = shadow 2810 2811shadow: runtime pixmaps 2812 $(MKDIR_P) $(SHADOWDIR) 2813 cd $(SHADOWDIR); ln -s ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../vimtutor ../gvimtutor ../install-sh . 2814 mkdir $(SHADOWDIR)/auto 2815 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2816 $(MKDIR_P) $(SHADOWDIR)/po 2817 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/Makefile . 2818 cd $(SHADOWDIR); rm -f auto/link.sed 2819 cp Makefile configure $(SHADOWDIR) 2820 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2821 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2822 cp config.mk.dist $(SHADOWDIR) 2823 $(MKDIR_P) $(SHADOWDIR)/xxd 2824 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2825 if test -d $(RSRC_DIR); then \ 2826 cd $(SHADOWDIR); \ 2827 ln -s ../infplist.xml .; \ 2828 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2829 fi 2830 $(MKDIR_P) $(SHADOWDIR)/testdir 2831 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2832 ../../testdir/Make_all.mak \ 2833 ../../testdir/README.txt \ 2834 ../../testdir/*.in \ 2835 ../../testdir/*.vim \ 2836 ../../testdir/*.py \ 2837 ../../testdir/python* \ 2838 ../../testdir/pyxfile \ 2839 ../../testdir/sautest \ 2840 ../../testdir/samples \ 2841 ../../testdir/test83-tags? \ 2842 ../../testdir/*.ok . 2843 2844# Link needed for doing "make install" in a shadow directory. 2845runtime: 2846 -ln -s ../runtime . 2847 2848# Link needed for doing "make" using GTK in a shadow directory. 2849pixmaps: 2850 -ln -s ../pixmaps . 2851 2852# Update the synmenu.vim file with the latest Syntax menu. 2853# This is only needed when runtime/makemenu.vim was changed. 2854menu: ./vim ../runtime/makemenu.vim 2855 ./vim -u ../runtime/makemenu.vim 2856 2857# Start configure from scratch 2858scrub scratch: 2859 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2860 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2861 touch auto/config.h 2862 cp config.mk.dist auto/config.mk 2863 2864distclean: clean scratch 2865 -rm -f tags 2866 2867dist: distclean 2868 @echo 2869 @echo Making the distribution has to be done in the top directory 2870 2871mdepend: 2872 -@rm -f Makefile~ 2873 cp Makefile Makefile~ 2874 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2875 @for i in $(ALL_SRC) ; do \ 2876 echo "$$i" ; \ 2877 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2878 $(CPP) $$i |\ 2879 grep '^# .*"\./.*\.h"' |\ 2880 sort -t'"' -u +1 -2 |\ 2881 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2882 ` >> tmp_make ; \ 2883 done 2884 mv tmp_make Makefile 2885 2886depend: 2887 -@rm -f Makefile~ 2888 cp Makefile Makefile~ 2889 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2890 -for i in $(ALL_SRC); do echo $$i; \ 2891 $(CPP_DEPEND) $$i | \ 2892 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2893 mv tmp_make Makefile 2894 2895# Run lint. Clean up the *.ln files that are sometimes left behind. 2896lint: 2897 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2898 -rm -f *.ln 2899 2900# Check dosinst.c with lint. 2901lintinstall: 2902 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2903 -rm -f dosinst.ln 2904 2905########################################################################### 2906 2907.c.o: 2908 $(CCC) $< 2909 2910auto/if_perl.c: if_perl.xs 2911 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2912 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2913 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2914 2915auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2916 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2917 2918auto/pathdef.c: Makefile auto/config.mk 2919 -@echo creating $@ 2920 -@echo '/* pathdef.c */' > $@ 2921 -@echo '/* This file is automatically created by Makefile' >> $@ 2922 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2923 -@echo '#include "vim.h"' >> $@ 2924 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2925 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2926 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2927 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2928 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2929 -@if test -n "$(COMPILEDBY)"; then \ 2930 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2931 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2932 -@echo '";' >> $@ 2933 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2934 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2935 -@echo '";' >> $@ 2936 -@sh $(srcdir)/pathdef.sh 2937 2938GUI_GTK_RES_INPUTS = \ 2939 ../pixmaps/stock_vim_build_tags.png \ 2940 ../pixmaps/stock_vim_find_help.png \ 2941 ../pixmaps/stock_vim_save_all.png \ 2942 ../pixmaps/stock_vim_session_load.png \ 2943 ../pixmaps/stock_vim_session_new.png \ 2944 ../pixmaps/stock_vim_session_save.png \ 2945 ../pixmaps/stock_vim_shell.png \ 2946 ../pixmaps/stock_vim_window_maximize.png \ 2947 ../pixmaps/stock_vim_window_maximize_width.png \ 2948 ../pixmaps/stock_vim_window_minimize.png \ 2949 ../pixmaps/stock_vim_window_minimize_width.png \ 2950 ../pixmaps/stock_vim_window_split.png \ 2951 ../pixmaps/stock_vim_window_split_vertical.png 2952 2953auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2954 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2955auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2956 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2957 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2958 fi 2959 2960# All the object files are put in the "objects" directory. Since not all make 2961# commands understand putting object files in another directory, it must be 2962# specified for each file separately. 2963 2964objects: objects/.dirstamp 2965 2966objects/.dirstamp: 2967 $(MKDIR_P) objects 2968 touch objects/.dirstamp 2969 2970# All object files depend on the objects directory, so that parallel make 2971# works. Can't depend on the directory itself, its timestamp changes all the 2972# time. 2973$(ALL_OBJ): objects/.dirstamp 2974 2975objects/arabic.o: arabic.c 2976 $(CCC) -o $@ arabic.c 2977 2978objects/blowfish.o: blowfish.c 2979 $(CCC) -o $@ blowfish.c 2980 2981objects/buffer.o: buffer.c 2982 $(CCC) -o $@ buffer.c 2983 2984objects/charset.o: charset.c 2985 $(CCC) -o $@ charset.c 2986 2987objects/crypt.o: crypt.c 2988 $(CCC) -o $@ crypt.c 2989 2990objects/crypt_zip.o: crypt_zip.c 2991 $(CCC) -o $@ crypt_zip.c 2992 2993objects/dict.o: dict.c 2994 $(CCC) -o $@ dict.c 2995 2996objects/diff.o: diff.c 2997 $(CCC) -o $@ diff.c 2998 2999objects/digraph.o: digraph.c 3000 $(CCC) -o $@ digraph.c 3001 3002objects/edit.o: edit.c 3003 $(CCC) -o $@ edit.c 3004 3005objects/eval.o: eval.c 3006 $(CCC) -o $@ eval.c 3007 3008objects/evalfunc.o: evalfunc.c 3009 $(CCC) -o $@ evalfunc.c 3010 3011objects/ex_cmds.o: ex_cmds.c 3012 $(CCC) -o $@ ex_cmds.c 3013 3014objects/ex_cmds2.o: ex_cmds2.c 3015 $(CCC) -o $@ ex_cmds2.c 3016 3017objects/ex_docmd.o: ex_docmd.c 3018 $(CCC) -o $@ ex_docmd.c 3019 3020objects/ex_eval.o: ex_eval.c 3021 $(CCC) -o $@ ex_eval.c 3022 3023objects/ex_getln.o: ex_getln.c 3024 $(CCC) -o $@ ex_getln.c 3025 3026objects/farsi.o: farsi.c 3027 $(CCC) -o $@ farsi.c 3028 3029objects/fileio.o: fileio.c 3030 $(CCC) -o $@ fileio.c 3031 3032objects/fold.o: fold.c 3033 $(CCC) -o $@ fold.c 3034 3035objects/getchar.o: getchar.c 3036 $(CCC) -o $@ getchar.c 3037 3038objects/hardcopy.o: hardcopy.c 3039 $(CCC) -o $@ hardcopy.c 3040 3041objects/hashtab.o: hashtab.c 3042 $(CCC) -o $@ hashtab.c 3043 3044objects/gui.o: gui.c 3045 $(CCC) -o $@ gui.c 3046 3047objects/gui_at_fs.o: gui_at_fs.c 3048 $(CCC) -o $@ gui_at_fs.c 3049 3050objects/gui_at_sb.o: gui_at_sb.c 3051 $(CCC) -o $@ gui_at_sb.c 3052 3053objects/gui_athena.o: gui_athena.c 3054 $(CCC) -o $@ gui_athena.c 3055 3056objects/gui_beval.o: gui_beval.c 3057 $(CCC) -o $@ gui_beval.c 3058 3059objects/gui_gtk.o: gui_gtk.c 3060 $(CCC) -o $@ gui_gtk.c 3061 3062objects/gui_gtk_f.o: gui_gtk_f.c 3063 $(CCC) -o $@ gui_gtk_f.c 3064 3065objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3066 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3067 3068objects/gui_gtk_x11.o: gui_gtk_x11.c 3069 $(CCC) -o $@ gui_gtk_x11.c 3070 3071objects/gui_motif.o: gui_motif.c 3072 $(CCC) -o $@ gui_motif.c 3073 3074objects/gui_xmdlg.o: gui_xmdlg.c 3075 $(CCC) -o $@ gui_xmdlg.c 3076 3077objects/gui_xmebw.o: gui_xmebw.c 3078 $(CCC) -o $@ gui_xmebw.c 3079 3080objects/gui_x11.o: gui_x11.c 3081 $(CCC) -o $@ gui_x11.c 3082 3083objects/gui_photon.o: gui_photon.c 3084 $(CCC) -o $@ gui_photon.c 3085 3086objects/gui_mac.o: gui_mac.c 3087 $(CCC) -o $@ gui_mac.c 3088 3089objects/hangulin.o: hangulin.c 3090 $(CCC) -o $@ hangulin.c 3091 3092objects/if_cscope.o: if_cscope.c 3093 $(CCC) -o $@ if_cscope.c 3094 3095objects/if_xcmdsrv.o: if_xcmdsrv.c 3096 $(CCC) -o $@ if_xcmdsrv.c 3097 3098objects/if_lua.o: if_lua.c 3099 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3100 3101objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3102 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3103 3104mzscheme_base.c: 3105 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3106 3107objects/if_perl.o: auto/if_perl.c 3108 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3109 3110objects/if_perlsfio.o: if_perlsfio.c 3111 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3112 3113objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 3114 $(CCC_NF) $(PYTHON_CFLAGS) $(ALL_CFLAGS) -o $@ \ 3115 $(PYTHON_CONFDIR)/getpath.c \ 3116 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 3117 $(PYTHON_GETPATH_CFLAGS) 3118 3119objects/if_python.o: if_python.c if_py_both.h 3120 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3121 3122objects/if_python3.o: if_python3.c if_py_both.h 3123 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3124 3125objects/if_ruby.o: if_ruby.c 3126 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3127 3128objects/if_tcl.o: if_tcl.c 3129 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3130 3131objects/integration.o: integration.c 3132 $(CCC) -o $@ integration.c 3133 3134objects/json.o: json.c 3135 $(CCC) -o $@ json.c 3136 3137objects/json_test.o: json_test.c 3138 $(CCC) -o $@ json_test.c 3139 3140objects/kword_test.o: kword_test.c 3141 $(CCC) -o $@ kword_test.c 3142 3143objects/list.o: list.c 3144 $(CCC) -o $@ list.c 3145 3146objects/main.o: main.c 3147 $(CCC) -o $@ main.c 3148 3149objects/mark.o: mark.c 3150 $(CCC) -o $@ mark.c 3151 3152objects/memfile.o: memfile.c 3153 $(CCC) -o $@ memfile.c 3154 3155objects/memfile_test.o: memfile_test.c 3156 $(CCC) -o $@ memfile_test.c 3157 3158objects/memline.o: memline.c 3159 $(CCC) -o $@ memline.c 3160 3161objects/menu.o: menu.c 3162 $(CCC) -o $@ menu.c 3163 3164objects/message.o: message.c 3165 $(CCC) -o $@ message.c 3166 3167objects/message_test.o: message_test.c 3168 $(CCC) -o $@ message_test.c 3169 3170objects/misc1.o: misc1.c 3171 $(CCC) -o $@ misc1.c 3172 3173objects/misc2.o: misc2.c 3174 $(CCC) -o $@ misc2.c 3175 3176objects/move.o: move.c 3177 $(CCC) -o $@ move.c 3178 3179objects/mbyte.o: mbyte.c 3180 $(CCC) -o $@ mbyte.c 3181 3182objects/normal.o: normal.c 3183 $(CCC) -o $@ normal.c 3184 3185objects/ops.o: ops.c 3186 $(CCC) -o $@ ops.c 3187 3188objects/option.o: option.c 3189 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3190 3191objects/os_beos.o: os_beos.c 3192 $(CCC) -o $@ os_beos.c 3193 3194objects/os_qnx.o: os_qnx.c 3195 $(CCC) -o $@ os_qnx.c 3196 3197objects/os_macosx.o: os_macosx.m 3198 $(CCC) -o $@ os_macosx.m 3199 3200objects/os_mac_conv.o: os_mac_conv.c 3201 $(CCC) -o $@ os_mac_conv.c 3202 3203objects/os_unix.o: os_unix.c 3204 $(CCC) -o $@ os_unix.c 3205 3206objects/os_mswin.o: os_mswin.c 3207 $(CCC) -o $@ os_mswin.c 3208 3209objects/winclip.o: winclip.c 3210 $(CCC) -o $@ winclip.c 3211 3212objects/pathdef.o: auto/pathdef.c 3213 $(CCC) -o $@ auto/pathdef.c 3214 3215objects/pty.o: pty.c 3216 $(CCC) -o $@ pty.c 3217 3218objects/popupmnu.o: popupmnu.c 3219 $(CCC) -o $@ popupmnu.c 3220 3221objects/quickfix.o: quickfix.c 3222 $(CCC) -o $@ quickfix.c 3223 3224objects/regexp.o: regexp.c regexp_nfa.c 3225 $(CCC) -o $@ regexp.c 3226 3227objects/screen.o: screen.c 3228 $(CCC) -o $@ screen.c 3229 3230objects/search.o: search.c 3231 $(CCC) -o $@ search.c 3232 3233objects/sha256.o: sha256.c 3234 $(CCC) -o $@ sha256.c 3235 3236objects/spell.o: spell.c 3237 $(CCC) -o $@ spell.c 3238 3239objects/spellfile.o: spellfile.c 3240 $(CCC) -o $@ spellfile.c 3241 3242objects/syntax.o: syntax.c 3243 $(CCC) -o $@ syntax.c 3244 3245objects/tag.o: tag.c 3246 $(CCC) -o $@ tag.c 3247 3248objects/term.o: term.c 3249 $(CCC) -o $@ term.c 3250 3251objects/terminal.o: terminal.c $(TERM_DEPS) 3252 $(CCC) -o $@ terminal.c 3253 3254objects/ui.o: ui.c 3255 $(CCC) -o $@ ui.c 3256 3257objects/undo.o: undo.c 3258 $(CCC) -o $@ undo.c 3259 3260objects/userfunc.o: userfunc.c 3261 $(CCC) -o $@ userfunc.c 3262 3263objects/window.o: window.c 3264 $(CCC) -o $@ window.c 3265 3266objects/workshop.o: workshop.c 3267 $(CCC) -o $@ workshop.c 3268 3269objects/wsdebug.o: wsdebug.c 3270 $(CCC) -o $@ wsdebug.c 3271 3272objects/netbeans.o: netbeans.c 3273 $(CCC) -o $@ netbeans.c 3274 3275objects/channel.o: channel.c 3276 $(CCC) -o $@ channel.c 3277 3278Makefile: 3279 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3280 3281CCCTERM = $(CCC) -Ilibvterm/include -DINLINE="" 3282objects/term_encoding.o: libvterm/src/encoding.c $(TERM_DEPS) 3283 $(CCCTERM) -o $@ libvterm/src/encoding.c 3284 3285objects/term_keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) 3286 $(CCCTERM) -o $@ libvterm/src/keyboard.c 3287 3288objects/term_mouse.o: libvterm/src/mouse.c $(TERM_DEPS) 3289 $(CCCTERM) -o $@ libvterm/src/mouse.c 3290 3291objects/term_parser.o: libvterm/src/parser.c $(TERM_DEPS) 3292 $(CCCTERM) -o $@ libvterm/src/parser.c 3293 3294objects/term_pen.o: libvterm/src/pen.c $(TERM_DEPS) 3295 $(CCCTERM) -o $@ libvterm/src/pen.c 3296 3297objects/term_screen.o: libvterm/src/screen.c $(TERM_DEPS) 3298 $(CCCTERM) -o $@ libvterm/src/screen.c 3299 3300objects/term_state.o: libvterm/src/state.c $(TERM_DEPS) 3301 $(CCCTERM) -o $@ libvterm/src/state.c 3302 3303objects/term_unicode.o: libvterm/src/unicode.c $(TERM_DEPS) 3304 $(CCCTERM) -o $@ libvterm/src/unicode.c 3305 3306objects/term_vterm.o: libvterm/src/vterm.c $(TERM_DEPS) 3307 $(CCCTERM) -o $@ libvterm/src/vterm.c 3308 3309############################################################################### 3310### MacOS X installation 3311### 3312### This installs a runnable Vim.app in $(prefix) 3313 3314REZ = /Developer/Tools/Rez 3315RESDIR = $(APPDIR)/Contents/Resources 3316VERSION = $(VIMMAJOR).$(VIMMINOR) 3317 3318### Common flags 3319M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3320 -DAPP_VER=$(VERSION) 3321 3322install_macosx: gui_bundle 3323# Remove the link to the runtime dir, don't want to copy all of that. 3324 -rm $(RESDIR)/vim/runtime 3325 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3326# Generate the help tags file now, it won't work with "make installruntime". 3327 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3328# Install the runtime files. Recursive! 3329 $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3330 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3331 VIMEXE=$$srcdir/$(VIMTARGET) \ 3332 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3333 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3334 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3335 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3336 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3337# Put the link back. 3338 ln -s `pwd`/../runtime $(RESDIR)/vim 3339# Copy rgb.txt, Mac doesn't always have X11 3340 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3341# TODO: Create the vimtutor and/or gvimtutor application. 3342 3343gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3344 bundle-language 3345 3346$(RESDIR): 3347 $(MKDIR_P) $@ 3348 3349bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3350# Make a link to the runtime directory, so that we can try out the executable 3351# without installing it. 3352 $(MKDIR_P) $(RESDIR)/vim 3353 -ln -s `pwd`/../runtime $(RESDIR)/vim 3354 3355bundle-executable: $(VIMTARGET) 3356 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3357 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3358 3359bundle-info: bundle-dir 3360 @echo "Creating PkgInfo" 3361 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3362 @echo "Creating Info.plist" 3363 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3364 3365bundle-resource: bundle-dir bundle-rsrc 3366 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3367 3368### Classic resources 3369# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3370# This file is also required for OS X Vim. 3371bundle-rsrc: os_mac.rsr.hqx 3372 @echo "Creating resource fork" 3373 python dehqx.py $< 3374 rm -f gui_mac.rsrc 3375 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3376 3377# po/Make_osx.pl says something about generating a Mac message file 3378# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3379# *really* be upset that Carbon Vim was not localised in 3380# Ukrainian? 3381# 3382#bundle-language: bundle-dir po/Make_osx.pl 3383# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3384bundle-language: bundle-dir 3385 3386$(APPDIR)/Contents: 3387 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3388 $(MKDIR_P) $(RESDIR)/English.lproj 3389 3390 3391############################################################################### 3392### (automatically generated by 'make depend') 3393### Dependencies: 3394objects/arabic.o: arabic.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3395 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3396 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3397 globals.h farsi.h arabic.h 3398objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 3399 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3400 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3401 proto.h globals.h farsi.h arabic.h 3402objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3403 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3404 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3405 globals.h farsi.h arabic.h version.h 3406objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3407 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3408 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3409 globals.h farsi.h arabic.h 3410objects/crypt.o: crypt.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3411 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3412 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3413 globals.h farsi.h arabic.h 3414objects/crypt_zip.o: crypt_zip.c vim.h auto/config.h feature.h os_unix.h \ 3415 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3416 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3417 proto.h globals.h farsi.h arabic.h 3418objects/dict.o: dict.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3419 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3420 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3421 globals.h farsi.h arabic.h 3422objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3423 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3424 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3425 globals.h farsi.h arabic.h 3426objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3427 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3428 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3429 globals.h farsi.h arabic.h 3430objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3431 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3432 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3433 globals.h farsi.h arabic.h 3434objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3435 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3436 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3437 globals.h farsi.h arabic.h version.h 3438objects/evalfunc.o: evalfunc.c vim.h auto/config.h feature.h os_unix.h \ 3439 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3440 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3441 proto.h globals.h farsi.h arabic.h version.h 3442objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3443 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3444 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3445 globals.h farsi.h arabic.h version.h 3446objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 3447 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3448 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3449 proto.h globals.h farsi.h arabic.h version.h 3450objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 3451 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3452 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3453 proto.h globals.h farsi.h arabic.h ex_cmdidxs.h 3454objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3455 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3456 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3457 globals.h farsi.h arabic.h 3458objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 3459 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3460 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3461 proto.h globals.h farsi.h arabic.h 3462objects/farsi.o: farsi.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3463 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3464 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3465 globals.h farsi.h arabic.h 3466objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3467 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3468 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3469 globals.h farsi.h arabic.h 3470objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3471 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3472 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3473 globals.h farsi.h arabic.h 3474objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3475 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3476 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3477 globals.h farsi.h arabic.h 3478objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 3479 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3480 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3481 proto.h globals.h farsi.h arabic.h version.h 3482objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3483 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3484 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3485 globals.h farsi.h arabic.h 3486objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 3487 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3488 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3489 proto.h globals.h farsi.h arabic.h if_cscope.h 3490objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 3491 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3492 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3493 proto.h globals.h farsi.h arabic.h version.h 3494objects/json.o: json.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3495 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3496 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3497 globals.h farsi.h arabic.h 3498objects/list.o: list.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3499 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3500 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3501 globals.h farsi.h arabic.h 3502objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3503 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3504 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3505 globals.h farsi.h arabic.h 3506objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3507 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3508 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3509 globals.h farsi.h arabic.h 3510objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3511 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3512 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3513 globals.h farsi.h arabic.h 3514objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3515 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3516 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3517 globals.h farsi.h arabic.h 3518objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3519 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3520 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3521 globals.h farsi.h arabic.h 3522objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3523 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3524 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3525 globals.h farsi.h arabic.h 3526objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3527 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3528 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3529 globals.h farsi.h arabic.h version.h 3530objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3531 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3532 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3533 globals.h farsi.h arabic.h 3534objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3535 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3536 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3537 globals.h farsi.h arabic.h 3538objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3539 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3540 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3541 globals.h farsi.h arabic.h 3542objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3543 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3544 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3545 globals.h farsi.h arabic.h 3546objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3547 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3548 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3549 arabic.h 3550objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3551 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3552 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3553 globals.h farsi.h arabic.h 3554objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3555 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3556 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3557 globals.h farsi.h arabic.h if_mzsch.h os_unixx.h 3558objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 3559 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3560 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3561 proto.h globals.h farsi.h arabic.h 3562objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 3563 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3564 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3565 proto.h globals.h farsi.h arabic.h 3566objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 3567 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3568 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3569 proto.h globals.h farsi.h arabic.h 3570objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3571 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3572 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3573 globals.h farsi.h arabic.h regexp_nfa.c 3574objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3575 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3576 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3577 globals.h farsi.h arabic.h 3578objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3579 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3580 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3581 globals.h farsi.h arabic.h 3582objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3583 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3584 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3585 globals.h farsi.h arabic.h 3586objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3587 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3588 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3589 globals.h farsi.h arabic.h 3590objects/spellfile.o: spellfile.c vim.h auto/config.h feature.h os_unix.h \ 3591 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3592 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3593 proto.h globals.h farsi.h arabic.h 3594objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3595 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3596 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3597 globals.h farsi.h arabic.h 3598objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3599 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3600 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3601 arabic.h 3602objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3603 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3604 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3605 globals.h farsi.h arabic.h 3606objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3607 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3608 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3609 arabic.h 3610objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3611 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3612 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3613 globals.h farsi.h arabic.h 3614objects/userfunc.o: userfunc.c vim.h auto/config.h feature.h os_unix.h \ 3615 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3616 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3617 proto.h globals.h farsi.h arabic.h 3618objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3619 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3620 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3621 globals.h farsi.h arabic.h version.h 3622objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3623 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3624 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3625 globals.h farsi.h arabic.h 3626objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3627 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3628 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3629 arabic.h 3630objects/gui_gtk.o: gui_gtk.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3631 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3632 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3633 globals.h farsi.h arabic.h gui_gtk_f.h 3634objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 3635 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3636 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3637 proto.h globals.h farsi.h arabic.h gui_gtk_f.h 3638objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 3639 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3640 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3641 proto.h globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3642 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3643 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3644 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3645 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3646 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3647 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3648 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3649 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3650 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3651 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3652 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3653 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3654 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3655 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3656 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3657 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3658 ../pixmaps/tb_minwidth.xpm 3659objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 3660 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3661 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3662 proto.h globals.h farsi.h arabic.h 3663objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 3664 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3665 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3666 proto.h globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3667objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 3668 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3669 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3670 proto.h globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3671 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3672 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3673 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3674 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3675 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3676 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3677 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3678 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3679 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3680 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3681 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3682 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3683 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3684 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3685 ../pixmaps/tb_minwidth.xpm 3686objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 3687 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3688 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3689 proto.h globals.h farsi.h arabic.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3690 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3691objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3692 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3693 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3694 globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \ 3695 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3696objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3697 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3698 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3699 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3700objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3701 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3702 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3703 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3704objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3705 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3706 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3707 arabic.h 3708objects/json_test.o: json_test.c main.c vim.h auto/config.h feature.h os_unix.h \ 3709 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3710 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3711 proto.h globals.h farsi.h arabic.h json.c 3712objects/kword_test.o: kword_test.c main.c vim.h auto/config.h feature.h os_unix.h \ 3713 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3714 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3715 proto.h globals.h farsi.h arabic.h charset.c mbyte.c 3716objects/memfile_test.o: memfile_test.c main.c vim.h auto/config.h feature.h \ 3717 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3718 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3719 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h memfile.c 3720objects/message_test.o: message_test.c main.c vim.h auto/config.h feature.h \ 3721 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3722 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3723 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h message.c 3724objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3725 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3726 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3727 proto.h globals.h farsi.h arabic.h 3728objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3729 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3730 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3731 globals.h farsi.h arabic.h 3732objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3733 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3734 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3735 proto.h globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3736objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3737 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3738 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3739 proto.h globals.h farsi.h arabic.h 3740objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3741 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3742 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3743 proto.h globals.h farsi.h arabic.h 3744objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3745 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3746 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3747 proto.h globals.h farsi.h arabic.h if_py_both.h 3748objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3749 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3750 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3751 proto.h globals.h farsi.h arabic.h if_py_both.h 3752objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3753 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3754 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3755 globals.h farsi.h arabic.h 3756objects/if_ruby.o: if_ruby.c auto/config.h vim.h feature.h os_unix.h auto/osdef.h \ 3757 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3758 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3759 globals.h farsi.h arabic.h version.h 3760objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3761 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3762 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3763 proto.h globals.h farsi.h arabic.h 3764objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3765 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3766 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3767 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h version.h \ 3768 workshop.h 3769objects/wsdebug.o: wsdebug.c 3770objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3771 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3772 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3773 proto.h globals.h farsi.h arabic.h integration.h 3774objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3775 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3776 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3777 proto.h globals.h farsi.h arabic.h version.h 3778objects/channel.o: channel.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3779 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3780 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3781 globals.h farsi.h arabic.h 3782objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3783
