1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples (can only use one!): 321#CONF_ARGS = --exec-prefix=/usr 322#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 323#CONF_ARGS = --with-global-runtime=/etc/vim 324#CONF_ARGS = --with-local-dir=/usr/share 325#CONF_ARGS = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome2-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406#CONF_OPT_LUA = --enable-luainterp 407#CONF_OPT_LUA = --enable-luainterp=dynamic 408#CONF_OPT_LUA = --enable-luainterp --with-luajit 409#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 410# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 411#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 412 413# MZSCHEME 414# Uncomment this when you want to include the MzScheme interface. 415# NOTE: does not work well together with valgrind. 416#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 417# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 418#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 420#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 421 422# PERL 423# Uncomment one of these when you want to include the Perl interface. 424# First one is for static linking, second one for dynamic loading. 425# The Perl option sometimes causes problems, because it adds extra flags 426# 427# to the command line. If you see strange flags during compilation, check in 428# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 429# the next line. 430# When you get an error for a missing "perl.exp" file, try creating an empty 431# one: "touch perl.exp". 432# This requires at least "small" features, "tiny" doesn't work. 433#CONF_OPT_PERL = --enable-perlinterp 434#CONF_OPT_PERL = --enable-perlinterp=dynamic 435 436# PYTHON 437# Uncomment this when you want to include the Python interface. 438# Requires small features or better, fails with tiny features. 439# NOTE: This may cause threading to be enabled, which has side effects (such 440# as using different libraries and debugging becomes more difficult). 441# NOTE: Using this together with Perl may cause a crash in initialization. 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 450#CONF_OPT_PYTHON3 = --enable-python3interp 451#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 452 453# RUBY 454# Uncomment this when you want to include the Ruby interface. 455# First one for static linking, second one for loading when used. 456# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 457#CONF_OPT_RUBY = --enable-rubyinterp 458#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 459#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 460 461# TCL 462# Uncomment this when you want to include the Tcl interface. 463# First one is for static linking, second one for dynamic loading. 464#CONF_OPT_TCL = --enable-tclinterp 465#CONF_OPT_TCL = --enable-tclinterp=dynamic 466#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 467 468# CSCOPE 469# Uncomment this when you want to include the Cscope interface. 470#CONF_OPT_CSCOPE = --enable-cscope 471 472# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 473#CONF_OPT_WORKSHOP = --enable-workshop 474 475# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 476# Motif version must have XPM libraries (see |workshop-xpm|). 477# Uncomment this when you do not want the netbeans interface. 478#CONF_OPT_NETBEANS = --disable-netbeans 479 480# CHANNEL - inter process communication. Same conditions as NetBeans. 481# Uncomment this when you do not want inter process communication. 482#CONF_OPT_CHANNEL = --disable-channel 483 484# MULTIBYTE - To edit multi-byte characters. 485# Uncomment this when you want to edit a multibyte language. 486# It's automatically enabled with normal features, GTK or IME support. 487# Note: Compile on a machine where setlocale() actually works, otherwise the 488# configure tests may fail. 489#CONF_OPT_MULTIBYTE = --enable-multibyte 490 491# NLS - National Language Support 492# Uncomment this when you do not want to support translated messages, even 493# though configure can find support for it. 494#CONF_OPT_NLS = --disable-nls 495 496# XIM - X Input Method. Special character input support for X11 (Chinese, 497# Japanese, special symbols, etc). Also needed for dead-key support. 498# When omitted it's automatically enabled for the X-windows GUI. 499# HANGUL - Input Hangul (Korean) language using internal routines. 500# Uncomment one of these when you want to input a multibyte language. 501#CONF_OPT_INPUT = --enable-xim 502#CONF_OPT_INPUT = --disable-xim 503#CONF_OPT_INPUT = --enable-hangulinput 504 505# FONTSET - X fontset support for output of languages with many characters. 506# Uncomment this when you want to output a multibyte language. 507#CONF_OPT_OUTPUT = --enable-fontset 508 509# ACL - Uncomment this when you do not want to include ACL support, even 510# though your system does support it. E.g., when it's buggy. 511#CONF_OPT_ACL = --disable-acl 512 513# gpm - For mouse support on Linux console via gpm 514# Uncomment this when you do not want to include gpm support, even 515# though you have gpm libraries and includes. 516#CONF_OPT_GPM = --disable-gpm 517 518# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 519# Uncomment this when you do not want do include sysmouse support, even 520# though you have /dev/sysmouse and includes. 521#CONF_OPT_SYSMOUSE = --disable-sysmouse 522 523# FEATURES - For creating Vim with more or less features 524# Uncomment one of these lines when you want to include few to many features. 525# The default is "huge" for most systems. 526#CONF_OPT_FEAT = --with-features=tiny 527#CONF_OPT_FEAT = --with-features=small 528#CONF_OPT_FEAT = --with-features=normal 529#CONF_OPT_FEAT = --with-features=big 530#CONF_OPT_FEAT = --with-features=huge 531 532# COMPILED BY - For including a specific e-mail address for ":version". 533#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 534 535# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 536# (otherwise Vim configure will try to include xterm titlebar access) 537# Also disable the GUI above, otherwise it will be included anyway. 538# When both GUI and X11 have been disabled this may save about 15% of the 539# code and make Vim startup quicker. 540#CONF_OPT_X = --without-x 541 542# X WINDOWS DIRECTORY - specify X directories 543# If configure can't find you X stuff, or if you have multiple X11 derivatives 544# installed, you may wish to specify which one to use. 545# Select nothing to let configure choose. 546# This here selects openwin (as found on sun). 547#XROOT = /usr/openwin 548#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 549 550# X11 Session Management Protocol support 551# Vim will try to use XSMP to catch the user logging out if there are unsaved 552# files. Uncomment this line to disable that (it prevents vim trying to open 553# communications with the session manager). 554#CONF_OPT_XSMP = --disable-xsmp 555 556# You may wish to include xsmp but use exclude xsmp-interact if the logout 557# XSMP functionality does not work well with your session-manager (at time of 558# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 559# applications after Vim has cancelled a logout (until Vim quits). This 560# *might* be the Vim code, but is more likely a bug in early GNOME-1. 561# This disables the dialog that asks you if you want to save files or not. 562#CONF_OPT_XSMP = --disable-xsmp-interact 563 564# COMPILER - Name of the compiler {{{1 565# The default from configure will mostly be fine, no need to change this, just 566# an example. If a compiler is defined here, configure will use it rather than 567# probing for one. It is dangerous to change this after configure was run. 568# Make will use your choice then -- but beware: Many things may change with 569# another compiler. It is wise to run 'make reconfig' to start all over 570# again. 571#CC = cc 572#CC = gcc 573#CC = clang 574 575# COMPILER FLAGS - change as you please. Either before running {{{1 576# configure or afterwards. For examples see below. 577# When using -g with some older versions of Linux you might get a 578# statically linked executable. 579# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 580#CFLAGS = -g 581#CFLAGS = -O 582 583# Optimization limits - depends on the compiler. Automatic check in configure 584# doesn't work very well, because many compilers only give a warning for 585# unrecognized arguments. 586#CFLAGS = -O -OPT:Olimit=2600 587#CFLAGS = -O -Olimit 2000 588#CFLAGS = -O -FOlimit,2000 589 590# Often used for GCC: mixed optimizing, lot of optimizing, debugging 591#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 592#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 593#CFLAGS = -g -Wall -Wmissing-prototypes 594#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 595#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 596#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 597 598# Use this with GCC to check for mistakes, unused arguments, etc. 599#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 600#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG 601#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 602#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 603 604# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 605# allocated memory (and makes every malloc()/free() very slow). 606# Electric Fence is free (search ftp sites). 607# You may want to set the EF_PROTECT_BELOW environment variable to check the 608# other side of allocated memory. 609# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 610# as root: sysctl -w vm.max_proc_mmap=30000 611#EXTRA_LIBS = /usr/local/lib/libefence.a 612 613# Autoconf binary. 614AUTOCONF = autoconf 615 616# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 617#PURIFY = purify 618 619# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 620# Used for the unittest targets. 621# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 622 623# NBDEBUG - debugging the netbeans interface. 624#EXTRA_DEFS = -DNBDEBUG 625 626# }}} 627 628# LINT - for running lint 629# For standard Unix lint 630LINT = lint 631LINT_OPTIONS = -beprxzF 632# For splint 633# It doesn't work well, crashes on include files and non-ascii characters. 634#LINT = splint 635#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 636 637# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 638# Might not work with GUI or Perl. 639# For unknown reasons adding "-lc" fixes a linking problem with some versions 640# of GCC. That's probably a bug in the "-pg" implementation. 641# After running Vim see the profile result with: gprof vim gmon.out | vim - 642# Need to recompile everything after changing this: "make clean" "make". 643#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 644#PROFILE_LIBS = -pg 645#PROFILE_LIBS = -pg -lc 646 647 648# TEST COVERAGE - Uncomment the two lines below the explanation to get code 649# coverage information. (provided by Yegappan Lakshmanan) 650# 1. make clean, run configure and build Vim as usual. 651# 2. Generate the baseline code coverage information: 652# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 653# 3. Run "make test" to run the unit tests. The code coverage information will 654# be generated in the src/objects directory. 655# 4. Generate the code coverage information from the tests: 656# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 657# 5. Combine the baseline and test code coverage data: 658# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 659# 6. Process the test coverage data and generate a report in html: 660# $ genhtml objects/coverage_total.info -o objects 661# 7. Open the objects/index.html file in a web browser to view the coverage 662# information. 663# 664# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 665# LDFLAGS=--coverage 666 667 668# Uncomment one of the next two lines to compile Vim with the 669# address sanitizer or with the undefined sanitizer. Works with gcc and 670# clang. May make Vim twice as slow. Errors reported on stderr. 671# More at: https://code.google.com/p/address-sanitizer/ 672#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 673#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 674SANITIZER_LIBS = $(SANITIZER_CFLAGS) 675 676# MEMORY LEAK DETECTION 677# Requires installing the ccmalloc library. 678# Configuration is in the .ccmalloc or ~/.ccmalloc file. 679# Doesn't work very well, since memory linked to from global variables 680# (in libraries) is also marked as leaked memory. 681#LEAK_CFLAGS = -DEXITFREE 682#LEAK_LIBS = -lccmalloc 683 684# Uncomment this line to have Vim call abort() when an internal error is 685# detected. Useful when using a tool to find errors. 686#ABORT_CLFAGS = -DABORT_ON_INTERNAL_ERROR 687 688##################################################### 689### Specific systems, check if yours is listed! ### {{{ 690##################################################### 691 692### Uncomment things here only if the values chosen by configure are wrong. 693### It's better to adjust configure.ac and "make autoconf", if you can! 694### Then send the required changes to configure.ac to the bugs list. 695 696### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 697### 698#CC = shlicc2 699#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 700 701### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 702### The first probably works on all systems 703### The second should work a bit better on newer systems 704### The third should work a bit better on HPUX 11.11 705### Information provided by: Richard Allen <[email protected]> 706#CC = c89 -D_HPUX_SOURCE 707#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 708#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 709 710### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 711### when the default (ISO) digraphs look completely wrong. 712### After changing this do "touch digraph.c; make". 713#EXTRA_DEFS = -DHPUX_DIGRAPHS 714 715### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 716### is too small to compile many routines. It produces too much defining 717### and no space errors. 718### Uncomment the following to specify a larger macro definition table. 719#CFLAGS = -Wp,-H256000 720 721### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 722### libraries in /usr/lib instead of /lib (avoiding transition links). 723### Information provided by: David Green 724#XROOT = /usr 725#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 726#GUI_INC_LOC = -I/usr/include/Motif1.2 727#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 728 729### (5) AIX 4.1.4 with cc 730#CFLAGS = -O -qmaxmem=8192 731 732### AIX with c89 (Walter Briscoe) 733#CC = c89 734#CPPFLAGS = -D_ALL_SOURCE 735 736### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 737# needed to avoid a problem where strings.h gets included 738#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 739 740### (W) Solaris with multi-threaded libraries (-lthread): 741### If suspending doesn't work properly, try using this line: 742#EXTRA_DEFS = -D_REENTRANT 743 744### (7) Solaris 2.4/2.5 with Centerline compiler 745#CC = clcc 746#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 747#CFLAGS = -O 748 749### (9) Solaris 2.x with cc (SunPro), using Athena. 750### Only required for compiling gui_at_sb.c. 751### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 752### Use one of the lines (either Full ANSI or no ANSI at all) 753#CFLAGS = $(CFLAGS) -Xc 754#CFLAGS = $(CFLAGS) -Xs 755 756### Solaris 2.3 with X11 and specific cc 757#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 758 759### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 760#CC = /usr/ucb/cc 761#EXTRA_LIBS = -R/usr/ucblib 762 763### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 764# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 765#CC = cc 766#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 767#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 768#XPM_IPATH = -I$(XPM_DIR)/include 769#EXTRA_LIBS = $(XPM_LIB) 770#EXTRA_IPATHS = $(XPM_IPATH) 771#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 772 773### Solaris with workshop compilers: Vim is unstable when compiled with 774# "-fast". Use this instead. (Shea Martin) 775#CFLAGS = -x02 -xtarget=ultra 776 777### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 778#LDFLAGS = -lw -ldl -lXmu 779#GUI_LIB_LOC = -L/usr/local/lib 780 781### (8) Unisys 6035 (Glauber Ribeiro) 782#EXTRA_LIBS = -lnsl -lsocket -lgen 783 784### When builtin functions cause problems with gcc (for Sun 4.1.x) 785#CFLAGS = -O2 -Wall -traditional -Wno-implicit 786 787### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 788#EXTRA_DEFS = -DDOMAIN 789#CFLAGS= -O -A systype,bsd4.3 790 791### Coherent 4.2.10 on Intel 386 platform 792#EXTRA_DEFS = -Dvoid=int 793#EXTRA_LIBS = -lterm -lsocket 794 795### SCO 3.2, with different library name for terminfo 796#EXTRA_LIBS = -ltinfo 797 798### UTS2 for Amdahl UTS 2.1.x 799#EXTRA_DEFS = -DUTS2 800#EXTRA_LIBS = -lsocket 801 802### UTS4 for Amdahl UTS 4.x 803#EXTRA_DEFS = -DUTS4 -Xa 804 805### USL for Unix Systems Laboratories (SYSV 4.2) 806#EXTRA_DEFS = -DUSL 807 808### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 809#CC= gcc -D_POSIX_SOURCE 810#CFLAGS= -O2 811#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 812 813### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 814### Also use the CONF_TERM_LIB below! 815#EXTRA_LIBS = -lgen 816 817### (D) QNX (by G.F. Desrochers) 818#CFLAGS = -g -O -mf -4 819 820### (F) QNX (by John Oleynick) 821# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 822# CONF_OPT_X = --without-x. 823# 2. make config 824# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 825# have -ldir (does config find it somewhere?) and -ltermcap has at 826# least one problem so I use termlib.o instead. The problem with 827# termcap is that it segfaults if you call it with the name of 828# a non-existent terminal type. 829# 4. edit auto/config.h and add #define USE_TMPNAM 830# 5. add termlib.o to OBJ 831# 6. make 832 833### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 834#EXTRA_LIBS = -lgen 835 836### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 837#EXTRA_LIBS = -lgen -lnsl 838### For SINIX-Y this is needed for the right prototype of gettimeofday() 839#EXTRA_DEFS = -D_XPG_IV 840 841### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 842# Use both "-F O3" lines for optimization or the "-g" line for debugging 843#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 844#CFLAGS = -F O3 -DSINIXN 845#LDFLAGS = -F O3 846#CFLAGS = -g -DSINIXN 847 848### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 849#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 850#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 851 852### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 853#GUI_INC_LOC = -I/usr/include 854#GUI_LIB_LOC = -L/usr/lib 855#EXTRA_LIBS = -lgen 856 857### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 858#GUI_INC_LOC = -I/usr/necccs/include 859#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 860#XROOT = /usr/necccs 861#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 862#EXTRA_LIBS = -lsocket -lgen 863 864### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 865# Not needed for Irix 5.3, Ives Aerts reported 866#EXTRA_LIBS = -lmalloc -lc_s 867# Irix 4.0, when regexp and regcmp cannot be found when linking: 868#EXTRA_LIBS = -lmalloc -lc_s -lPW 869 870### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 871# Note: This newer option style is used with the MipsPro compilers ONLY if 872# you are compiling an "n32" or "64" ABI binary (use either a -n32 873# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 874# then the CFLAGS option format will be the typical style (i.e. 875# -Olimit 3000). 876#CFLAGS = -OPT:Olimit=3000 -O 877 878### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 879# compiler features! Beware, the optimization is EXTREMELY thorough 880# and takes quite a long time. 881# Note: See the note above. Here, the -mips3 option automatically 882# enables either the "n32" or "64" ABI, depending on what machine you 883# are compiling on (n32 is explicitly enabled here, just to make sure). 884#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 885#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 886 887### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 888### Suggested by Jon Wright <[email protected]>. 889### Tested on R8000 IRIX6.1 Power Indigo2. 890### Check /etc/compiler.defaults for your compiler settings. 891# either (for 64 bit pointers) uncomment the following line 892#GUI_LIB_LOC = -L/usr/lib64 893# then 894# 1) make config 895# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 896# 3) make 897# 898# or (for 32bit pointers) uncomment the following line 899#EXTRA_DEFS = -n32 900#GUI_LIB_LOC = -L/usr/lib32 901# then 902# 1) make config 903# 2) edit auto/config.mk, add -n32 to LDFLAGS 904# 3) make 905# 906#Alternatively: use -o32 instead of -n32. 907### 908 909### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 910### which is found by configure, doesn't work correctly. Symptom is the 911### error message "Termcap entry too long". Uncomment the next line. 912### On AIX 4.2.1 (and other versions probably), libtermcap is reported 913### not to display properly. 914### after changing this, you need to do "make reconfig". 915#CONF_TERM_LIB = --with-tlib=curses 916 917### (E) If you want to use termlib library instead of the automatically found 918### one. After changing this, you need to do "make reconfig". 919#CONF_TERM_LIB = --with-tlib=termlib 920 921### (a) ESIX V4.2 (Reinhard Wobst) 922#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 923 924### (c) Tandem/NSK (Matthew Woehlke) 925#EXTRA_LIBS = -lfloss 926 927### If you want to use ncurses library instead of the automatically found one 928### after changing this, you need to do "make reconfig". 929#CONF_TERM_LIB = --with-tlib=ncurses 930 931### For GCC on MS-Windows, the ".exe" suffix will be added. 932#EXEEXT = .exe 933#LNKEXT = .exe 934 935### (O) For LynxOS 2.5.0, tested on PC. 936#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 937### For LynxOS 3.0.1, tested on PPC 938#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 939### For LynxOS 3.1.0, tested on PC 940#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 941 942 943### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 944### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 945#CFLAGS = -O -Qtarget=m88110compat 946#EXTRA_LIBS = -lgen 947 948# The value of QUOTESED comes from auto/config.mk. 949# Uncomment the next line to use the default value. 950# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 951 952##################### end of system specific lines ################### }}} 953 954### Names of the programs and targets {{{1 955VIMTARGET = $(VIMNAME)$(EXEEXT) 956EXTARGET = $(EXNAME)$(LNKEXT) 957VIEWTARGET = $(VIEWNAME)$(LNKEXT) 958GVIMNAME = g$(VIMNAME) 959GVIMTARGET = $(GVIMNAME)$(LNKEXT) 960GVIEWNAME = g$(VIEWNAME) 961GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 962RVIMNAME = r$(VIMNAME) 963RVIMTARGET = $(RVIMNAME)$(LNKEXT) 964RVIEWNAME = r$(VIEWNAME) 965RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 966RGVIMNAME = r$(GVIMNAME) 967RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 968RGVIEWNAME = r$(GVIEWNAME) 969RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 970VIMDIFFNAME = $(VIMNAME)diff 971GVIMDIFFNAME = g$(VIMDIFFNAME) 972VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 973GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 974EVIMNAME = e$(VIMNAME) 975EVIMTARGET = $(EVIMNAME)$(LNKEXT) 976EVIEWNAME = e$(VIEWNAME) 977EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 978 979### Names of the tools that are also made {{{1 980TOOLS = xxd/xxd$(EXEEXT) 981 982### Installation directories. The defaults come from configure. {{{1 983# 984### prefix the top directory for the data (default "/usr/local") 985# 986# Uncomment the next line to install Vim in your home directory. 987#prefix = $(HOME) 988 989### exec_prefix is the top directory for the executable (default $(prefix)) 990# 991# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 992#exec_prefix = /usr/machine 993 994### BINDIR dir for the executable (default "$(exec_prefix)/bin") 995### MANDIR dir for the manual pages (default "$(prefix)/man") 996### DATADIR dir for the other files (default "$(prefix)/lib" or 997# "$(prefix)/share") 998# They may be different when using different architectures for the 999# executable and a common directory for the other files. 1000# 1001# Uncomment the next line to install Vim in "/usr/bin" 1002#BINDIR = /usr/bin 1003# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1004#MANDIR = /usr/share/man 1005# Uncomment the next line to install Vim help files in "/usr/share/vim" 1006#DATADIR = /usr/share 1007 1008### DESTDIR root of the installation tree. This is prepended to the other 1009# directories. This directory must exist. 1010#DESTDIR = ~/pkg/vim 1011 1012### Directory of the man pages 1013MAN1DIR = /man1 1014 1015### Vim version (adjusted by a script) 1016VIMMAJOR = 8 1017VIMMINOR = 0 1018 1019### Location of Vim files (should not need to be changed, and {{{1 1020### some things might not work when they are changed!) 1021VIMDIR = /vim 1022VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1023HELPSUBDIR = /doc 1024COLSUBDIR = /colors 1025SYNSUBDIR = /syntax 1026INDSUBDIR = /indent 1027AUTOSUBDIR = /autoload 1028PLUGSUBDIR = /plugin 1029FTPLUGSUBDIR = /ftplugin 1030LANGSUBDIR = /lang 1031COMPSUBDIR = /compiler 1032KMAPSUBDIR = /keymap 1033MACROSUBDIR = /macros 1034PACKSUBDIR = /pack 1035TOOLSSUBDIR = /tools 1036TUTORSUBDIR = /tutor 1037SPELLSUBDIR = /spell 1038PRINTSUBDIR = /print 1039PODIR = po 1040 1041### VIMLOC common root of the Vim files (all versions) 1042### VIMRTLOC common root of the runtime Vim files (this version) 1043### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1044### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1045### HELPSUBLOC location for help files 1046### COLSUBLOC location for colorscheme files 1047### SYNSUBLOC location for syntax files 1048### INDSUBLOC location for indent files 1049### AUTOSUBLOC location for standard autoload files 1050### PLUGSUBLOC location for standard plugin files 1051### FTPLUGSUBLOC location for ftplugin files 1052### LANGSUBLOC location for language files 1053### COMPSUBLOC location for compiler files 1054### KMAPSUBLOC location for keymap files 1055### MACROSUBLOC location for macro files 1056### PACKSUBLOC location for packages 1057### TOOLSSUBLOC location for tools files 1058### TUTORSUBLOC location for tutor files 1059### SPELLSUBLOC location for spell files 1060### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1061### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1062### You can override these if you want to install them somewhere else. 1063### Edit feature.h for compile-time settings. 1064VIMLOC = $(DATADIR)$(VIMDIR) 1065VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1066VIMRCLOC = $(VIMLOC) 1067HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1068COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1069SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1070INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1071AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1072PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1073FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1074LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1075COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1076KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1077MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1078PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1079TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1080TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1081SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1082PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1083SCRIPTLOC = $(VIMRTLOC) 1084 1085### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1086### the runtime directory is not below it. 1087#VIMRUNTIMEDIR = $(VIMRTLOC) 1088 1089### Name of the defaults/evim/mswin file target. 1090VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1091EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1092MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1093 1094### Name of the menu file target. 1095SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1096SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1097SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1098 1099### Name of the bugreport file target. 1100SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1101 1102### Name of the rgb.txt file target. 1103SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1104 1105### Name of the file type detection file target. 1106SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1107 1108### Name of the file type detection file target. 1109SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1110 1111### Name of the file type detection script file target. 1112SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1113 1114### Name of the ftplugin-on file target. 1115SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1116 1117### Name of the ftplugin-off file target. 1118SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1119 1120### Name of the indent-on file target. 1121SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1122 1123### Name of the indent-off file target. 1124SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1125 1126### Name of the option window script file target. 1127SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1128 1129# Program to install the program in the target directory. Could also be "mv". 1130INSTALL_PROG = cp 1131 1132# Program to install the data in the target directory. Cannot be "mv"! 1133INSTALL_DATA = cp 1134INSTALL_DATA_R = cp -r 1135 1136### Program to run on installed binary. Use the second one to disable strip. 1137#STRIP = strip 1138#STRIP = /bin/true 1139 1140### Permissions for binaries {{{1 1141BINMOD = 755 1142 1143### Permissions for man page 1144MANMOD = 644 1145 1146### Permissions for help files 1147HELPMOD = 644 1148 1149### Permissions for Perl and shell scripts 1150SCRIPTMOD = 755 1151 1152### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1153VIMSCRIPTMOD = 644 1154 1155### Permissions for all directories that are created 1156DIRMOD = 755 1157 1158### Permissions for all other files that are created 1159FILEMOD = 644 1160 1161# Where to copy the man and help files from 1162HELPSOURCE = ../runtime/doc 1163 1164# Where to copy the script files from (menu, bugreport) 1165SCRIPTSOURCE = ../runtime 1166 1167# Where to copy the colorscheme files from 1168COLSOURCE = ../runtime/colors 1169 1170# Where to copy the syntax files from 1171SYNSOURCE = ../runtime/syntax 1172 1173# Where to copy the indent files from 1174INDSOURCE = ../runtime/indent 1175 1176# Where to copy the standard plugin files from 1177AUTOSOURCE = ../runtime/autoload 1178 1179# Where to copy the standard plugin files from 1180PLUGSOURCE = ../runtime/plugin 1181 1182# Where to copy the ftplugin files from 1183FTPLUGSOURCE = ../runtime/ftplugin 1184 1185# Where to copy the macro files from 1186MACROSOURCE = ../runtime/macros 1187 1188# Where to copy the package files from 1189PACKSOURCE = ../runtime/pack 1190 1191# Where to copy the tools files from 1192TOOLSSOURCE = ../runtime/tools 1193 1194# Where to copy the tutor files from 1195TUTORSOURCE = ../runtime/tutor 1196 1197# Where to copy the spell files from 1198SPELLSOURCE = ../runtime/spell 1199 1200# Where to look for language specific files 1201LANGSOURCE = ../runtime/lang 1202 1203# Where to look for compiler files 1204COMPSOURCE = ../runtime/compiler 1205 1206# Where to look for keymap files 1207KMAPSOURCE = ../runtime/keymap 1208 1209# Where to look for print resource files 1210PRINTSOURCE = ../runtime/print 1211 1212# If you are using Linux, you might want to use this to make vim the 1213# default vi editor, it will create a link from vi to Vim when doing 1214# "make install". An existing file will be overwritten! 1215# When not using it, some make programs can't handle an undefined $(LINKIT). 1216#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1217LINKIT = @echo >/dev/null 1218 1219### 1220### GRAPHICAL USER INTERFACE (GUI). {{{1 1221### 'configure --enable-gui' can enable one of these for you if you did set 1222### a corresponding CONF_OPT_GUI above and have X11. 1223### Override configures choice by uncommenting all the following lines. 1224### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1225### for enabling the Athena or Motif GUI. 1226#GUI_SRC = $(NONE_SRC) 1227#GUI_OBJ = $(NONE_OBJ) 1228#GUI_DEFS = $(NONE_DEFS) 1229#GUI_IPATH = $(NONE_IPATH) 1230#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1231#GUI_LIBS1 = $(NONE_LIBS1) 1232#GUI_LIBS2 = $(NONE_LIBS2) 1233#GUI_INSTALL = $(NONE_INSTALL) 1234#GUI_TARGETS = $(NONE_TARGETS) 1235#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1236#GUI_TESTTARGET = $(NONE_TESTTARGET) 1237#GUI_BUNDLE = $(NONE_BUNDLE) 1238 1239# Without a GUI install the normal way. 1240NONE_INSTALL = install_normal 1241 1242### GTK GUI 1243GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1244 gui_beval.c $(GRESOURCE_SRC) 1245GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1246 objects/pty.o objects/gui_gtk_f.o \ 1247 objects/gui_beval.o $(GRESOURCE_OBJ) 1248GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1249GTK_IPATH = $(GUI_INC_LOC) 1250GTK_LIBS_DIR = $(GUI_LIB_LOC) 1251GTK_LIBS1 = 1252GTK_LIBS2 = $(GTK_LIBNAME) 1253GTK_INSTALL = install_normal install_gui_extra 1254GTK_TARGETS = installglinks 1255GTK_MAN_TARGETS = yes 1256GTK_TESTTARGET = gui 1257GTK_BUNDLE = 1258 1259### Motif GUI 1260MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1261 gui_xmdlg.c gui_xmebw.c 1262MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1263 objects/pty.o objects/gui_beval.o \ 1264 objects/gui_xmdlg.o objects/gui_xmebw.o 1265MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1266MOTIF_IPATH = $(GUI_INC_LOC) 1267MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1268MOTIF_LIBS1 = 1269MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1270MOTIF_INSTALL = install_normal install_gui_extra 1271MOTIF_TARGETS = installglinks 1272MOTIF_MAN_TARGETS = yes 1273MOTIF_TESTTARGET = gui 1274MOTIF_BUNDLE = 1275 1276### Athena GUI 1277### Use Xaw3d to make the menus look a little bit nicer 1278#XAW_LIB = -lXaw3d 1279XAW_LIB = -lXaw 1280 1281### When using Xaw3d, uncomment/comment the following lines to also get the 1282### scrollbars from Xaw3d. 1283#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1284#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1285# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1286#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1287# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1288# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1289ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1290 gui_at_sb.c gui_at_fs.c 1291ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1292 objects/pty.o objects/gui_beval.o \ 1293 objects/gui_at_sb.o objects/gui_at_fs.o 1294ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1295 1296ATHENA_IPATH = $(GUI_INC_LOC) 1297ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1298ATHENA_LIBS1 = $(XAW_LIB) 1299ATHENA_LIBS2 = -lXt 1300ATHENA_INSTALL = install_normal install_gui_extra 1301ATHENA_TARGETS = installglinks 1302ATHENA_MAN_TARGETS = yes 1303ATHENA_TESTTARGET = gui 1304ATHENA_BUNDLE = 1305 1306### neXtaw GUI 1307NEXTAW_LIB = -lneXtaw 1308 1309NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1310NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1311 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1312NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1313 1314NEXTAW_IPATH = $(GUI_INC_LOC) 1315NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1316NEXTAW_LIBS1 = $(NEXTAW_LIB) 1317NEXTAW_LIBS2 = -lXt 1318NEXTAW_INSTALL = install_normal install_gui_extra 1319NEXTAW_TARGETS = installglinks 1320NEXTAW_MAN_TARGETS = yes 1321NEXTAW_TESTTARGET = gui 1322NEXTAW_BUNDLE = 1323 1324### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1325# errors: ld: Undefined symbol 1326# _get_wmShellWidgetClass 1327# _get_applicationShellWidgetClass 1328# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1329# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1330#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1331# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1332# too: 1333#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1334 1335# PHOTON GUI 1336PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1337PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1338PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1339PHOTONGUI_IPATH = 1340PHOTONGUI_LIBS_DIR = 1341PHOTONGUI_LIBS1 = -lph -lphexlib 1342PHOTONGUI_LIBS2 = 1343PHOTONGUI_INSTALL = install_normal install_gui_extra 1344PHOTONGUI_TARGETS = installglinks 1345PHOTONGUI_MAN_TARGETS = yes 1346PHOTONGUI_TESTTARGET = gui 1347PHOTONGUI_BUNDLE = 1348 1349# CARBON GUI 1350CARBONGUI_SRC = gui.c gui_mac.c 1351CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1352CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1353 -Wall -Wno-unknown-pragmas \ 1354 -mdynamic-no-pic -pipe 1355CARBONGUI_IPATH = -I. -Iproto 1356CARBONGUI_LIBS_DIR = 1357CARBONGUI_LIBS1 = -framework Carbon 1358CARBONGUI_LIBS2 = 1359CARBONGUI_INSTALL = install_macosx 1360CARBONGUI_TARGETS = 1361CARBONGUI_MAN_TARGETS = 1362CARBONGUI_TESTTARGET = gui 1363CARBONGUI_BUNDLE = gui_bundle 1364APPDIR = $(VIMNAME).app 1365CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1366 1367# All GUI files 1368ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1369ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1370 1371# }}} 1372 1373### Command to create dependencies based on #include "..." 1374### prototype headers are ignored due to -DPROTO, system 1375### headers #include <...> are ignored if we use the -MM option, as 1376### e.g. provided by gcc-cpp. 1377### Include FEAT_GUI to get dependency on gui.h 1378### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1379CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1380 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1381 1382# flags for cproto 1383# This is for cproto 3 patchlevel 8 or below 1384# __inline, __attribute__ and __extension__ are not recognized by cproto 1385# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1386#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1387# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1388# -D__extension__= -D__restrict="" \ 1389# -D__gnuc_va_list=char -D__builtin_va_list=char 1390 1391# 1392# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1393# __inline and __attribute__ are now recognized by cproto 1394# -D"foo()=" is not supported by all compilers so do not use it 1395NO_ATTR= 1396# 1397# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1398# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1399# 1400# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1401PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1402 1403 1404################################################ 1405## no changes required below this line ## 1406################################################ 1407 1408SHELL = /bin/sh 1409 1410.SUFFIXES: 1411.SUFFIXES: .c .o .pro 1412 1413PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1414POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1415 1416ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CLFAGS) $(POST_DEFS) 1417 1418# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1419# with "-E". 1420OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1421 1422LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(TCL_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1423 1424LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1425 1426DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1427 1428# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1429# needed by racket. 1430ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1431ALL_LIBS = \ 1432 $(GUI_LIBS1) \ 1433 $(GUI_X_LIBS) \ 1434 $(GUI_LIBS2) \ 1435 $(X_PRE_LIBS) \ 1436 $(X_LIBS) \ 1437 $(X_EXTRA_LIBS) \ 1438 $(MZSCHEME_LIBS) \ 1439 $(LIBS) \ 1440 $(EXTRA_LIBS) \ 1441 $(LUA_LIBS) \ 1442 $(PERL_LIBS) \ 1443 $(PYTHON_LIBS) \ 1444 $(PYTHON3_LIBS) \ 1445 $(TCL_LIBS) \ 1446 $(RUBY_LIBS) \ 1447 $(PROFILE_LIBS) \ 1448 $(SANITIZER_LIBS) \ 1449 $(LEAK_LIBS) 1450 1451# abbreviations 1452DEST_BIN = $(DESTDIR)$(BINDIR) 1453DEST_VIM = $(DESTDIR)$(VIMLOC) 1454DEST_RT = $(DESTDIR)$(VIMRTLOC) 1455DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1456DEST_COL = $(DESTDIR)$(COLSUBLOC) 1457DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1458DEST_IND = $(DESTDIR)$(INDSUBLOC) 1459DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1460DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1461DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1462DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1463DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1464DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1465DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1466DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1467DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1468DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1469DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1470DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1471DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1472DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1473 1474# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1475# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1476# directory first. 1477# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1478DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1479DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1480DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1481DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1482DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1483DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1484DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1485DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1486DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1487DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1488DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1489DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1490DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1491 1492# BASIC_SRC: files that are always used 1493# GUI_SRC: extra GUI files for current configuration 1494# ALL_GUI_SRC: all GUI files for Unix 1495# 1496# SRC: files used for current configuration 1497# TAGS_SRC: source files used for make tags 1498# TAGS_INCL: include files used for make tags 1499# ALL_SRC: source files used for make depend and make lint 1500 1501TAGS_INCL = *.h 1502 1503BASIC_SRC = \ 1504 arabic.c \ 1505 blowfish.c \ 1506 buffer.c \ 1507 charset.c \ 1508 crypt.c \ 1509 crypt_zip.c \ 1510 dict.c \ 1511 diff.c \ 1512 digraph.c \ 1513 edit.c \ 1514 eval.c \ 1515 evalfunc.c \ 1516 ex_cmds.c \ 1517 ex_cmds2.c \ 1518 ex_docmd.c \ 1519 ex_eval.c \ 1520 ex_getln.c \ 1521 farsi.c \ 1522 fileio.c \ 1523 fold.c \ 1524 getchar.c \ 1525 hardcopy.c \ 1526 hashtab.c \ 1527 if_cscope.c \ 1528 if_xcmdsrv.c \ 1529 json.c \ 1530 list.c \ 1531 main.c \ 1532 mark.c \ 1533 memfile.c \ 1534 memline.c \ 1535 menu.c \ 1536 message.c \ 1537 misc1.c \ 1538 misc2.c \ 1539 move.c \ 1540 mbyte.c \ 1541 normal.c \ 1542 ops.c \ 1543 option.c \ 1544 os_unix.c \ 1545 auto/pathdef.c \ 1546 popupmnu.c \ 1547 quickfix.c \ 1548 regexp.c \ 1549 screen.c \ 1550 search.c \ 1551 sha256.c \ 1552 spell.c \ 1553 spellfile.c \ 1554 syntax.c \ 1555 tag.c \ 1556 term.c \ 1557 ui.c \ 1558 undo.c \ 1559 userfunc.c \ 1560 version.c \ 1561 window.c \ 1562 $(OS_EXTRA_SRC) 1563 1564SRC = $(BASIC_SRC) \ 1565 $(GUI_SRC) \ 1566 $(HANGULIN_SRC) \ 1567 $(LUA_SRC) \ 1568 $(MZSCHEME_SRC) \ 1569 $(PERL_SRC) \ 1570 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1571 $(TCL_SRC) \ 1572 $(RUBY_SRC) \ 1573 $(WORKSHOP_SRC) \ 1574 $(WSDEBUG_SRC) 1575 1576TAGS_SRC = *.c *.cpp if_perl.xs 1577 1578EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1579 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1580 gui_beval.c workshop.c wsdebug.c integration.c \ 1581 netbeans.c channel.c \ 1582 $(GRESOURCE_SRC) 1583 1584# Unittest files 1585JSON_TEST_SRC = json_test.c 1586JSON_TEST_TARGET = json_test$(EXEEXT) 1587KWORD_TEST_SRC = kword_test.c 1588KWORD_TEST_TARGET = kword_test$(EXEEXT) 1589MEMFILE_TEST_SRC = memfile_test.c 1590MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1591MESSAGE_TEST_SRC = message_test.c 1592MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1593 1594UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1595UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1596RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1597 1598# All sources, also the ones that are not configured 1599ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) $(EXTRA_SRC) 1600 1601# Which files to check with lint. Select one of these three lines. ALL_SRC 1602# checks more, but may not work well for checking a GUI that wasn't configured. 1603# The perl sources also don't work well with lint. 1604LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1605 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1606 $(WORKSHOP_SRC) $(WSDEBUG_SRC) \ 1607 $(NETBEANS_SRC) $(CHANNEL_SRC) 1608#LINT_SRC = $(SRC) 1609#LINT_SRC = $(ALL_SRC) 1610#LINT_SRC = $(BASIC_SRC) 1611 1612OBJ_COMMON = \ 1613 objects/arabic.o \ 1614 objects/buffer.o \ 1615 objects/blowfish.o \ 1616 objects/crypt.o \ 1617 objects/crypt_zip.o \ 1618 objects/dict.o \ 1619 objects/diff.o \ 1620 objects/digraph.o \ 1621 objects/edit.o \ 1622 objects/eval.o \ 1623 objects/evalfunc.o \ 1624 objects/ex_cmds.o \ 1625 objects/ex_cmds2.o \ 1626 objects/ex_docmd.o \ 1627 objects/ex_eval.o \ 1628 objects/ex_getln.o \ 1629 objects/farsi.o \ 1630 objects/fileio.o \ 1631 objects/fold.o \ 1632 objects/getchar.o \ 1633 objects/hardcopy.o \ 1634 objects/hashtab.o \ 1635 $(HANGULIN_OBJ) \ 1636 objects/if_cscope.o \ 1637 objects/if_xcmdsrv.o \ 1638 objects/list.o \ 1639 objects/mark.o \ 1640 objects/memline.o \ 1641 objects/menu.o \ 1642 objects/misc1.o \ 1643 objects/misc2.o \ 1644 objects/move.o \ 1645 objects/mbyte.o \ 1646 objects/normal.o \ 1647 objects/ops.o \ 1648 objects/option.o \ 1649 objects/os_unix.o \ 1650 objects/pathdef.o \ 1651 objects/popupmnu.o \ 1652 objects/quickfix.o \ 1653 objects/regexp.o \ 1654 objects/screen.o \ 1655 objects/search.o \ 1656 objects/sha256.o \ 1657 objects/spell.o \ 1658 objects/spellfile.o \ 1659 objects/syntax.o \ 1660 objects/tag.o \ 1661 objects/term.o \ 1662 objects/ui.o \ 1663 objects/undo.o \ 1664 objects/userfunc.o \ 1665 objects/version.o \ 1666 objects/window.o \ 1667 $(GUI_OBJ) \ 1668 $(LUA_OBJ) \ 1669 $(MZSCHEME_OBJ) \ 1670 $(PERL_OBJ) \ 1671 $(PYTHON_OBJ) \ 1672 $(PYTHON3_OBJ) \ 1673 $(TCL_OBJ) \ 1674 $(RUBY_OBJ) \ 1675 $(OS_EXTRA_OBJ) \ 1676 $(WORKSHOP_OBJ) \ 1677 $(NETBEANS_OBJ) \ 1678 $(CHANNEL_OBJ) \ 1679 $(WSDEBUG_OBJ) 1680 1681# The files included by tests are not in OBJ_COMMON. 1682OBJ_MAIN = \ 1683 objects/charset.o \ 1684 objects/json.o \ 1685 objects/main.o \ 1686 objects/memfile.o \ 1687 objects/message.o 1688 1689OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1690 1691OBJ_JSON_TEST = \ 1692 objects/charset.o \ 1693 objects/memfile.o \ 1694 objects/message.o \ 1695 objects/json_test.o 1696 1697JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1698 1699OBJ_KWORD_TEST = \ 1700 objects/json.o \ 1701 objects/memfile.o \ 1702 objects/message.o \ 1703 objects/kword_test.o 1704 1705KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1706 1707OBJ_MEMFILE_TEST = \ 1708 objects/charset.o \ 1709 objects/json.o \ 1710 objects/message.o \ 1711 objects/memfile_test.o 1712 1713MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1714 1715OBJ_MESSAGE_TEST = \ 1716 objects/charset.o \ 1717 objects/json.o \ 1718 objects/memfile.o \ 1719 objects/message_test.o 1720 1721MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1722 1723ALL_OBJ = $(OBJ_COMMON) \ 1724 $(OBJ_MAIN) \ 1725 $(OBJ_JSON_TEST) \ 1726 $(OBJ_KWORD_TEST) \ 1727 $(OBJ_MEMFILE_TEST) \ 1728 $(OBJ_MESSAGE_TEST) 1729 1730 1731PRO_AUTO = \ 1732 arabic.pro \ 1733 blowfish.pro \ 1734 buffer.pro \ 1735 charset.pro \ 1736 crypt.pro \ 1737 crypt_zip.pro \ 1738 dict.pro \ 1739 diff.pro \ 1740 digraph.pro \ 1741 edit.pro \ 1742 eval.pro \ 1743 evalfunc.pro \ 1744 ex_cmds.pro \ 1745 ex_cmds2.pro \ 1746 ex_docmd.pro \ 1747 ex_eval.pro \ 1748 ex_getln.pro \ 1749 farsi.pro \ 1750 fileio.pro \ 1751 fold.pro \ 1752 getchar.pro \ 1753 hardcopy.pro \ 1754 hashtab.pro \ 1755 hangulin.pro \ 1756 if_cscope.pro \ 1757 if_lua.pro \ 1758 if_mzsch.pro \ 1759 if_python.pro \ 1760 if_python3.pro \ 1761 if_ruby.pro \ 1762 if_xcmdsrv.pro \ 1763 json.pro \ 1764 list.pro \ 1765 main.pro \ 1766 mark.pro \ 1767 mbyte.pro \ 1768 memfile.pro \ 1769 memline.pro \ 1770 menu.pro \ 1771 message.pro \ 1772 misc1.pro \ 1773 misc2.pro \ 1774 move.pro \ 1775 normal.pro \ 1776 ops.pro \ 1777 option.pro \ 1778 os_mac_conv.pro \ 1779 os_unix.pro \ 1780 popupmnu.pro \ 1781 pty.pro \ 1782 quickfix.pro \ 1783 regexp.pro \ 1784 screen.pro \ 1785 search.pro \ 1786 sha256.pro \ 1787 spell.pro \ 1788 spellfile.pro \ 1789 syntax.pro \ 1790 tag.pro \ 1791 term.pro \ 1792 termlib.pro \ 1793 ui.pro \ 1794 undo.pro \ 1795 userfunc.pro \ 1796 version.pro \ 1797 window.pro \ 1798 gui_beval.pro \ 1799 workshop.pro \ 1800 netbeans.pro \ 1801 channel.pro \ 1802 $(ALL_GUI_PRO) \ 1803 $(TCL_PRO) 1804 1805# Resources used for the Mac are in one directory. 1806RSRC_DIR = os_mac_rsrc 1807 1808PRO_MANUAL = os_amiga.pro os_win32.pro \ 1809 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1810 1811# Default target is making the executable and tools 1812all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1813 1814tools: $(TOOLS) 1815 1816# Run configure with all the setting from above. 1817# 1818# Note: auto/config.h doesn't depend on configure, because running configure 1819# doesn't always update auto/config.h. The timestamp isn't changed if the 1820# file contents didn't change (to avoid recompiling everything). Including a 1821# dependency on auto/config.h would cause running configure each time when 1822# auto/config.h isn't updated. The dependency on auto/config.mk should make 1823# sure configure is run when it's needed. 1824# 1825# Remove the config.cache every time, once in a while it causes problems that 1826# are very hard to figure out. 1827# 1828config auto/config.mk: auto/configure config.mk.in config.h.in 1829 -rm -f auto/config.cache 1830 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1831 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1832 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1833 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1834 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1835 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1836 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1837 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1838 $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1839 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1840 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1841 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1842 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1843 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1844 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1845 $(CONF_OPT_CHANNEL) \ 1846 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1847 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1848 $(CONF_OPT_SYSMOUSE); \ 1849 fi 1850 1851# Use "make reconfig" to rerun configure without cached values. 1852# When config.h changes, most things will be recompiled automatically. 1853# Invoke $(MAKE) to run config with the empty auto/config.mk. 1854# Invoke $(MAKE) to build all with the filled auto/config.mk. 1855reconfig: scratch clean 1856 $(MAKE) -f Makefile config 1857 $(MAKE) -f Makefile all 1858 1859# Run autoconf to produce auto/configure. 1860# Note: 1861# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1862# producing auto/configure. 1863# - autoconf is not run automatically, because a patch usually changes both 1864# configure.ac and auto/configure but can't update the timestamps. People 1865# who do not have (the correct version of) autoconf would run into trouble. 1866# 1867# Two tricks are required to make autoconf put its output in the "auto" dir: 1868# - Temporarily move the ./configure script to ./configure.save. Don't 1869# overwrite it, it's probably the result of an aborted autoconf. 1870# - Use sed to change ./config.log to auto/config.log in the configure script. 1871# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1872# care of: 1873# - configure.lineno: has the line numbers replaced with $LINENO. That 1874# improves patches a LOT, thus use it instead (until someone says it doesn't 1875# work on some system). 1876# - autom4te.cache directory is created and not cleaned up. Delete it. 1877# - Uses ">config.log" instead of "./config.log". 1878autoconf: 1879 if test ! -f configure.save; then mv configure configure.save; fi 1880 $(AUTOCONF) 1881 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1882 chmod 755 auto/configure 1883 mv -f configure.save configure 1884 -rm -rf autom4te.cache 1885 -rm -f auto/config.status auto/config.cache 1886 1887# Run Perl to generate the Ex command lookup table. This only needs to be run 1888# when a command name has been added or changed. 1889# NOTE: Only works when perl and vim executables are available 1890cmdidxs: ex_cmds.h 1891 if test X`perl -e "print 123"` = "X123"; then \ 1892 vim ex_docmd.c -c '/Beginning.*create_cmdidxs/,/End.*create_cmdidxs/! perl create_cmdidxs.pl' -c wq; \ 1893 else \ 1894 echo Cannot run Perl; \ 1895 fi 1896 1897# Re-execute this Makefile to include the new auto/config.mk produced by 1898# configure Only used when typing "make" with a fresh auto/config.mk. 1899myself: 1900 $(MAKE) -f Makefile all 1901 1902 1903# The normal command to compile a .c file to its .o file. 1904# Without or with ALL_CFLAGS. 1905CCC_NF = $(CC) -c -I$(srcdir) 1906CCC = $(CCC_NF) $(ALL_CFLAGS) 1907 1908 1909# Link the target for normal use or debugging. 1910# A shell script is used to try linking without unnecessary libraries. 1911$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1912 $(CCC) version.c -o objects/version.o 1913 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1914 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1915 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1916 sh $(srcdir)/link.sh 1917 1918xxd/xxd$(EXEEXT): xxd/xxd.c 1919 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1920 $(MAKE) -f Makefile 1921 1922# Build the language specific files if they were unpacked. 1923# Generate the converted .mo files separately, it's no problem if this fails. 1924languages: 1925 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1926 cd $(PODIR); \ 1927 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1928 fi 1929 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1930 cd $(PODIR); \ 1931 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1932 fi 1933 1934# Update the *.po files for changes in the sources. Only run manually. 1935update-po: 1936 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1937 1938# Generate function prototypes. This is not needed to compile vim, but if 1939# you want to use it, cproto is out there on the net somewhere -- Webb 1940# 1941# When generating os_amiga.pro and os_win32.pro there will be a 1942# few include files that can not be found, that's OK. 1943 1944proto: $(PRO_AUTO) $(PRO_MANUAL) 1945 1946# Filter out arguments that cproto doesn't support. 1947# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 1948# them as a list of individual flags. 1949# The -E"gcc -E" argument must be separate to avoid problems with shell 1950# quoting. 1951CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1952 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g'` 1953 1954### Would be nice if this would work for "normal" make. 1955### Currently it only works for (Free)BSD make. 1956#$(PRO_AUTO): $$(*F).c 1957# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1958 1959# Always define FEAT_GUI. This may generate a few warnings if it's also 1960# defined in auto/config.h, you can ignore that. 1961.c.pro: 1962 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1963 echo "/* vim: set ft=c : */" >> proto/$@ 1964 1965os_amiga.pro: os_amiga.c 1966 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1967 echo "/* vim: set ft=c : */" >> proto/$@ 1968 1969os_win32.pro: os_win32.c 1970 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1971 echo "/* vim: set ft=c : */" >> proto/$@ 1972 1973os_mswin.pro: os_mswin.c 1974 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1975 echo "/* vim: set ft=c : */" >> proto/$@ 1976 1977winclip.pro: winclip.c 1978 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1979 echo "/* vim: set ft=c : */" >> proto/$@ 1980 1981os_beos.pro: os_beos.c 1982 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1983 echo "/* vim: set ft=c : */" >> proto/$@ 1984 1985os_vms.pro: os_vms.c 1986# must use os_vms_conf.h for auto/config.h 1987 mv auto/config.h auto/config.h.save 1988 cp os_vms_conf.h auto/config.h 1989 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1990 echo "/* vim: set ft=c : */" >> proto/$@ 1991 rm auto/config.h 1992 mv auto/config.h.save auto/config.h 1993 1994# if_perl.pro is special: Use the generated if_perl.c for input and remove 1995# prototypes for local functions. 1996if_perl.pro: auto/if_perl.c 1997 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1998 1999gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2000 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2001 echo "/* vim: set ft=c : */" >> proto/$@ 2002 2003notags: 2004 -rm -f tags 2005 2006# Note: tags is made for the currently configured version, can't include both 2007# Motif and Athena GUI 2008# You can ignore error messages for missing files. 2009tags TAGS: notags 2010 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 2011 2012# Make a highlight file for types. Requires Exuberant ctags and awk 2013types: types.vim 2014types.vim: $(TAGS_SRC) $(TAGS_INCL) 2015 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 2016 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2017 {printf("%s ", $$1)}END{print ""}' > $@ 2018 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2019 2020# TESTING 2021# 2022# Execute the test scripts and the unittests. 2023test check: scripttests unittests 2024 2025# Execute the test scripts. Run these after compiling Vim, before installing. 2026# This doesn't depend on $(VIMTARGET), because that won't work when configure 2027# wasn't run yet. Restart make to build it instead. 2028# 2029# This will produce a lot of garbage on your screen, including a few error 2030# messages. Don't worry about that. 2031# If there is a real error, there will be a difference between "testXX.out" and 2032# a "testXX.ok" file. 2033# If everything is alright, the final message will be "ALL DONE". If not you 2034# get "TEST FAILURE". 2035# 2036scripttests: 2037 $(MAKE) -f Makefile $(VIMTARGET) 2038 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2039 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2040 fi 2041 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2042 ln -s $(VIMTARGET) vim; \ 2043 fi 2044 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2045 2046# Run the tests with the GUI. Assumes vim/gvim was already built 2047testgui: 2048 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2049 2050benchmark: 2051 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2052 2053unittesttargets: 2054 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2055 2056# Execute the unittests one by one. 2057unittest unittests: $(RUN_UNITTESTS) 2058 2059run_json_test: $(JSON_TEST_TARGET) 2060 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2061 2062run_kword_test: $(KWORD_TEST_TARGET) 2063 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2064 2065run_memfile_test: $(MEMFILE_TEST_TARGET) 2066 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2067 2068run_message_test: $(MESSAGE_TEST_TARGET) 2069 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2070 2071# Run individual OLD style test, assuming that Vim was already compiled. 2072test1 \ 2073 test_autocmd_option \ 2074 test_autoformat_join \ 2075 test_changelist \ 2076 test_close_count \ 2077 test_comparators \ 2078 test_erasebackword \ 2079 test_eval \ 2080 test_fixeol \ 2081 test_getcwd \ 2082 test_insertcount \ 2083 test_listchars \ 2084 test_search_mbyte \ 2085 test_wordcount \ 2086 test3 test4 test5 test6 test7 test8 test9 \ 2087 test11 test12 test14 test15 test17 test18 test19 \ 2088 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29 \ 2089 test30 test31 test32 test33 test34 test36 test37 test38 test39 \ 2090 test40 test41 test42 test43 test44 test45 test48 test49 \ 2091 test50 test51 test52 test53 test54 test55 test56 test57 test58 test59 \ 2092 test60 test64 test65 test66 test67 test68 test69 \ 2093 test70 test72 test73 test74 test75 test77 test78 test79 \ 2094 test80 test82 test83 test84 test85 test86 test87 test88 \ 2095 test90 test91 test94 test95 test97 test98 test99 \ 2096 test100 test101 test103 test104 test107 test108: 2097 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2098 2099# Run individual NEW style test, assuming that Vim was already compiled. 2100test_arglist \ 2101 test_arabic \ 2102 test_assert \ 2103 test_assign \ 2104 test_autochdir \ 2105 test_autocmd \ 2106 test_backspace_opt \ 2107 test_breakindent \ 2108 test_bufwintabinfo \ 2109 test_cd \ 2110 test_cdo \ 2111 test_changedtick \ 2112 test_channel \ 2113 test_charsearch \ 2114 test_charsearch_utf8 \ 2115 test_cindent \ 2116 test_clientserver \ 2117 test_cmdline \ 2118 test_command_count \ 2119 test_crypt \ 2120 test_cscope \ 2121 test_cursor_func \ 2122 test_delete \ 2123 test_diffmode \ 2124 test_digraph \ 2125 test_functions \ 2126 test_display \ 2127 test_edit \ 2128 test_ex_undo \ 2129 test_execute_func \ 2130 test_expand \ 2131 test_expand_dllpath \ 2132 test_expr \ 2133 test_expr_utf8 \ 2134 test_farsi \ 2135 test_feedkeys \ 2136 test_file_perm \ 2137 test_fileformat \ 2138 test_filter_cmd \ 2139 test_filter_map \ 2140 test_findfile \ 2141 test_float_func \ 2142 test_fnameescape \ 2143 test_fnamemodify \ 2144 test_fold \ 2145 test_ga \ 2146 test_gf \ 2147 test_glob2regpat \ 2148 test_gn \ 2149 test_goto \ 2150 test_gui \ 2151 test_gui_init \ 2152 test_hardcopy \ 2153 test_help \ 2154 test_help_tagjump \ 2155 test_hide \ 2156 test_history \ 2157 test_hlsearch \ 2158 test_increment \ 2159 test_increment_dbcs \ 2160 test_job_fails \ 2161 test_join \ 2162 test_json \ 2163 test_jumps \ 2164 test_lambda \ 2165 test_langmap \ 2166 test_largefile \ 2167 test_lispwords \ 2168 test_listlbr \ 2169 test_listlbr_utf8 \ 2170 test_lua \ 2171 test_makeencoding \ 2172 test_man \ 2173 test_mapping \ 2174 test_marks \ 2175 test_match \ 2176 test_matchadd_conceal \ 2177 test_matchadd_conceal_utf8 \ 2178 test_menu \ 2179 test_messages \ 2180 test_mksession \ 2181 test_mksession_utf8 \ 2182 test_nested_function \ 2183 test_netbeans \ 2184 test_normal \ 2185 test_number \ 2186 test_options \ 2187 test_packadd \ 2188 test_partial \ 2189 test_paste \ 2190 test_perl \ 2191 test_popup \ 2192 test_profile \ 2193 test_put \ 2194 test_python2 \ 2195 test_python3 \ 2196 test_pyx2 \ 2197 test_pyx3 \ 2198 test_quickfix \ 2199 test_quotestar \ 2200 test_recover \ 2201 test_regexp_latin \ 2202 test_regexp_utf8 \ 2203 test_reltime \ 2204 test_retab \ 2205 test_ruby \ 2206 test_search \ 2207 test_searchpos \ 2208 test_set \ 2209 test_signs \ 2210 test_smartindent \ 2211 test_sort \ 2212 test_source_utf8 \ 2213 test_spell \ 2214 test_startup \ 2215 test_startup_utf8 \ 2216 test_stat \ 2217 test_statusline \ 2218 test_substitute \ 2219 test_syn_attr \ 2220 test_syntax \ 2221 test_system \ 2222 test_tabline \ 2223 test_tabpage \ 2224 test_tagcase \ 2225 test_tagjump \ 2226 test_taglist \ 2227 test_tcl \ 2228 test_textobjects \ 2229 test_timers \ 2230 test_true_false \ 2231 test_undo \ 2232 test_unlet \ 2233 test_usercommands \ 2234 test_utf8 \ 2235 test_viminfo \ 2236 test_vimscript \ 2237 test_visual \ 2238 test_window_cmd \ 2239 test_window_id \ 2240 test_writefile \ 2241 test_alot_latin \ 2242 test_alot_utf8 \ 2243 test_alot: 2244 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile $@.res VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2245 @if test -f testdir/test.log; then \ 2246 cat testdir/test.log; \ 2247 fi 2248 cat testdir/messages 2249 2250newtests: 2251 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2252 @if test -f testdir/test.log; then \ 2253 cat testdir/test.log; \ 2254 fi 2255 cat testdir/messages 2256 2257testclean: 2258 cd testdir; $(MAKE) -f Makefile clean 2259 if test -d $(PODIR); then \ 2260 cd $(PODIR); $(MAKE) checkclean; \ 2261 fi 2262 2263# Unittests 2264# It's build just like Vim to satisfy all dependencies. 2265$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2266 $(CCC) version.c -o objects/version.o 2267 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2268 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2269 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2270 sh $(srcdir)/link.sh 2271 2272$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2273 $(CCC) version.c -o objects/version.o 2274 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2275 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2276 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2277 sh $(srcdir)/link.sh 2278 2279$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2280 $(CCC) version.c -o objects/version.o 2281 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2282 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2283 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2284 sh $(srcdir)/link.sh 2285 2286$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2287 $(CCC) version.c -o objects/version.o 2288 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2289 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2290 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2291 sh $(srcdir)/link.sh 2292 2293# install targets 2294 2295install: $(GUI_INSTALL) 2296 2297install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2298 2299install_gui_extra: installgtutorbin 2300 2301installvim: installvimbin installtutorbin \ 2302 installruntime installlinks installmanlinks 2303 2304# 2305# Avoid overwriting an existing executable, somebody might be running it and 2306# overwriting it could cause it to crash. Deleting it is OK, it won't be 2307# really deleted until all running processes for it have exited. It is 2308# renamed first, in case the deleting doesn't work. 2309# 2310# If you want to keep an older version, rename it before running "make 2311# install". 2312# 2313installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2314 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2315 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2316 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2317 fi 2318 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2319 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2320 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2321# may create a link to the new executable from /usr/bin/vi 2322 -$(LINKIT) 2323 2324# Long list of arguments for the shell script that installs the manual pages 2325# for one language. 2326INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2327 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2328 2329# Install most of the runtime files 2330installruntime: installrtbase installmacros installpack installtutor installspell 2331 2332# install the help files; first adjust the contents for the final location 2333installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2334 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2335 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 2336 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2337 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2338# Generate the help tags with ":helptags" to handle all languages. 2339# Move the distributed tags file aside and restore it, to avoid it being 2340# different from the repository. 2341 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2342 mv -f tags tags.dist; fi 2343 @echo generating help tags 2344 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2345 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2346 cd $(HELPSOURCE); \ 2347 files=`ls *.txt tags`; \ 2348 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2349 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2350 cd $(DEST_HELP); \ 2351 chmod $(HELPMOD) $$files 2352 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2353 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2354 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2355# install the menu files 2356 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2357 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2358 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2359 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2360 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2361 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2362# install the defaults/evim/mswin file 2363 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2364 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2365 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2366 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2367 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2368 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2369# install the rgb.txt file 2370 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2371 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2372# install the bugreport file 2373 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2374 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2375# install the example vimrc files 2376 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2377 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2378 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2379 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2380# install the file type detection files 2381 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2382 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2383 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2384 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2385 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2386 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2387 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2388 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2389 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2390 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2391 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2392 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2393 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2394 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2395 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2396 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2397# install the print resource files 2398 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2399 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2400# install the colorscheme files 2401 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 2402 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 2403# install the syntax files 2404 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2405 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2406# install the indent files 2407 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2408 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2409# install the standard autoload files 2410 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2411 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2412 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2413 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2414# install the standard plugin files 2415 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2416 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2417# install the ftplugin files 2418 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2419 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2420# install the compiler files 2421 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2422 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2423 2424installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2425 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2426 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2427 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2428 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2429# When using CVS some CVS directories might have been copied. 2430# Also delete AAPDIR and *.info files. 2431 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2432 if test -n "$$cvs"; then \ 2433 rm -rf $$cvs; \ 2434 fi 2435 2436installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2437 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2438 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2439 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2440 2441# install the tutor files 2442installtutorbin: $(DEST_VIM) 2443 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2444 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2445 2446installgtutorbin: $(DEST_VIM) 2447 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2448 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2449 2450installtutor: $(DEST_RT) $(DEST_TUTOR) 2451 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2452 -rm -f $(DEST_TUTOR)/*.info 2453 chmod $(HELPMOD) $(DEST_TUTOR)/* 2454 2455# Install the spell files, if they exist. This assumes at least the English 2456# spell file is there. 2457installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2458 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2459 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2460 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2461 fi 2462 2463# install helper program xxd 2464installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2465 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2466 $(INSTALL_TOOL_LANGS) 2467 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2468 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2469 rm -f $(DEST_BIN)/xxd.rm; \ 2470 fi 2471 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2472 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2473 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2474 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2475 2476# install the runtime tools 2477 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2478# When using CVS some CVS directories might have been copied. 2479 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2480 if test -n "$$cvs"; then \ 2481 rm -rf $$cvs; \ 2482 fi 2483 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2484# replace the path in some tools 2485 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2486 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2487 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2488 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2489 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2490 2491# install the language specific files for tools, if they were unpacked 2492install-tool-languages: 2493 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2494 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2495 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2496 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2497 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2498 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2499 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2500 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2501 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2502 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2503 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2504 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2505 2506# install the language specific files, if they were unpacked 2507install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2508 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2509 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2510 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2511 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2512 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2513 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2514 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2515 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2516 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2517 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2518 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2519 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2520 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2521 $(DEST_MAN_FR) $(INSTALLMLARGS) 2522 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2523 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2524 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2525 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2526 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2527 $(DEST_MAN_IT) $(INSTALLMLARGS) 2528 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2529 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2530 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2531 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2532 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2533 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2534 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2535 $(DEST_MAN_PL) $(INSTALLMLARGS) 2536 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2537 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2538 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2539 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2540 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2541 $(DEST_MAN_RU) $(INSTALLMLARGS) 2542 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2543 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2544 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2545 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2546 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2547 fi 2548 if test -d $(LANGSOURCE); then \ 2549 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2550 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2551 fi 2552 if test -d $(KMAPSOURCE); then \ 2553 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2554 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2555 fi 2556 2557# Install the icons for KDE, if the directory exists and the icon doesn't. 2558# Always when $(DESTDIR) is not empty. 2559ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2560ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2561ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2562ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2563DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2564KDEPATH = $(HOME)/.kde/share/icons 2565install-icons: 2566 if test -n "$(DESTDIR)"; then \ 2567 $(SHELL) ./mkinstalldirs $(ICON48PATH) $(ICON32PATH) \ 2568 $(ICON16PATH) $(DESKTOPPATH); \ 2569 fi 2570 2571 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2572 -a ! -f $(ICON48PATH)/gvim.png; then \ 2573 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2574 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2575 -a -w $(ICONTHEMEPATH) \ 2576 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2577 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2578 fi \ 2579 fi 2580 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2581 -a ! -f $(ICON32PATH)/gvim.png; then \ 2582 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2583 fi 2584 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2585 -a ! -f $(ICON16PATH)/gvim.png; then \ 2586 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2587 fi 2588 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2589 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2590 $(SCRIPTSOURCE)/gvim.desktop \ 2591 $(DESKTOPPATH); \ 2592 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2593 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2594 fi \ 2595 fi 2596 2597$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2598 @echo Runtime files not found. 2599 @echo You need to unpack the runtime archive before running "make install". 2600 test -f error 2601 2602$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2603 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2604 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2605 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2606 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2607 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2608 -$(SHELL) ./mkinstalldirs $@ 2609 -chmod $(DIRMOD) $@ 2610 2611# create links from various names to vim. This is only done when the links 2612# (or executables with the same name) don't exist yet. 2613installlinks: $(GUI_TARGETS) \ 2614 $(DEST_BIN)/$(EXTARGET) \ 2615 $(DEST_BIN)/$(VIEWTARGET) \ 2616 $(DEST_BIN)/$(RVIMTARGET) \ 2617 $(DEST_BIN)/$(RVIEWTARGET) \ 2618 $(INSTALLVIMDIFF) 2619 2620installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2621 $(DEST_BIN)/$(GVIEWTARGET) \ 2622 $(DEST_BIN)/$(RGVIMTARGET) \ 2623 $(DEST_BIN)/$(RGVIEWTARGET) \ 2624 $(DEST_BIN)/$(EVIMTARGET) \ 2625 $(DEST_BIN)/$(EVIEWTARGET) \ 2626 $(INSTALLGVIMDIFF) 2627 2628installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2629installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2630 2631$(DEST_BIN)/$(EXTARGET): 2632 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2633 2634$(DEST_BIN)/$(VIEWTARGET): 2635 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2636 2637$(DEST_BIN)/$(GVIMTARGET): 2638 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2639 2640$(DEST_BIN)/$(GVIEWTARGET): 2641 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2642 2643$(DEST_BIN)/$(RVIMTARGET): 2644 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2645 2646$(DEST_BIN)/$(RVIEWTARGET): 2647 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2648 2649$(DEST_BIN)/$(RGVIMTARGET): 2650 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2651 2652$(DEST_BIN)/$(RGVIEWTARGET): 2653 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2654 2655$(DEST_BIN)/$(VIMDIFFTARGET): 2656 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2657 2658$(DEST_BIN)/$(GVIMDIFFTARGET): 2659 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2660 2661$(DEST_BIN)/$(EVIMTARGET): 2662 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2663 2664$(DEST_BIN)/$(EVIEWTARGET): 2665 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2666 2667# Create links for the manual pages with various names to vim. This is only 2668# done when the links (or manpages with the same name) don't exist yet. 2669 2670INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2671 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2672 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2673 $(GVIMDIFFNAME) $(EVIEWNAME) 2674 2675installmanlinks: 2676 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2677 $(DEST_MAN) $(INSTALLMLARGS) 2678 2679uninstall: uninstall_runtime 2680 -rm -f $(DEST_BIN)/$(VIMTARGET) 2681 -rm -f $(DEST_BIN)/vimtutor 2682 -rm -f $(DEST_BIN)/gvimtutor 2683 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2684 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2685 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2686 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2687 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2688 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2689 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2690 2691# Note: the "rmdir" will fail if any files were added after "make install" 2692uninstall_runtime: 2693 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2694 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2695 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2696 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2697 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2698 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2699 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2700 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2701 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2702 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2703 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2704 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2705 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2706 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2707 $(DEST_MAN) $(INSTALLMLARGS) 2708 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2709 $(DEST_MAN_FR) $(INSTALLMLARGS) 2710 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2711 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2712 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2713 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2714 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2715 $(DEST_MAN_IT) $(INSTALLMLARGS) 2716 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2717 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2718 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2719 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2720 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2721 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2722 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2723 $(DEST_MAN_PL) $(INSTALLMLARGS) 2724 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2725 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2726 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2727 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2728 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2729 $(DEST_MAN_RU) $(INSTALLMLARGS) 2730 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2731 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2732 -rm -f $(DEST_MAN)/xxd.1 2733 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2734 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2735 -rm -f $(DEST_MAN_JA_U)/xxd.1 2736 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2737 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2738 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2739 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2740 -rm -f $(SYS_RGB_FILE) 2741 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2742 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2743 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2744 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2745 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2746 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2747 -rm -f $(SYS_OPTWIN_FILE) 2748 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2749 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2750 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2751 -rm -rf $(DEST_MACRO) 2752 -rm -rf $(DEST_PACK) 2753 -rm -rf $(DEST_TUTOR) 2754 -rm -rf $(DEST_SPELL) 2755 -rm -rf $(DEST_TOOLS) 2756 -rm -rf $(DEST_LANG) 2757 -rm -rf $(DEST_KMAP) 2758 -rm -rf $(DEST_COMP) 2759 -rm -f $(DEST_PRINT)/*.ps 2760 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2761 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2762 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2763 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2764 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2765# This will fail when other Vim versions are installed, no worries. 2766 -rmdir $(DEST_VIM) 2767 2768# Clean up all the files that have been produced, except configure's. 2769# We support common typing mistakes for Juergen! :-) 2770clean celan: testclean 2771 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2772 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2773 -rm -f conftest* *~ auto/link.sed 2774 -rm -f testdir/opt_test.vim 2775 -rm -f $(UNITTEST_TARGETS) 2776 -rm -f runtime pixmaps 2777 -rm -rf $(APPDIR) 2778 -rm -rf mzscheme_base.c 2779 if test -d $(PODIR); then \ 2780 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2781 fi 2782 2783# Make a shadow directory for compilation on another system or with different 2784# features. 2785SHADOWDIR = shadow 2786 2787shadow: runtime pixmaps 2788 mkdir $(SHADOWDIR) 2789 cd $(SHADOWDIR); ln -s ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../vimtutor ../gvimtutor ../mkinstalldirs . 2790 mkdir $(SHADOWDIR)/auto 2791 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2792 mkdir $(SHADOWDIR)/po 2793 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/Makefile . 2794 cd $(SHADOWDIR); rm -f auto/link.sed 2795 cp Makefile configure $(SHADOWDIR) 2796 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2797 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2798 cp config.mk.dist $(SHADOWDIR) 2799 mkdir $(SHADOWDIR)/xxd 2800 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2801 if test -d $(RSRC_DIR); then \ 2802 cd $(SHADOWDIR); \ 2803 ln -s ../infplist.xml .; \ 2804 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2805 fi 2806 mkdir $(SHADOWDIR)/testdir 2807 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2808 ../../testdir/Make_all.mak \ 2809 ../../testdir/README.txt \ 2810 ../../testdir/*.in \ 2811 ../../testdir/*.vim \ 2812 ../../testdir/*.py \ 2813 ../../testdir/python* \ 2814 ../../testdir/pyxfile \ 2815 ../../testdir/sautest \ 2816 ../../testdir/samples \ 2817 ../../testdir/test83-tags? \ 2818 ../../testdir/*.ok . 2819 2820# Link needed for doing "make install" in a shadow directory. 2821runtime: 2822 -ln -s ../runtime . 2823 2824# Link needed for doing "make" using GTK in a shadow directory. 2825pixmaps: 2826 -ln -s ../pixmaps . 2827 2828# Update the synmenu.vim file with the latest Syntax menu. 2829# This is only needed when runtime/makemenu.vim was changed. 2830menu: ./vim ../runtime/makemenu.vim 2831 ./vim -u ../runtime/makemenu.vim 2832 2833# Start configure from scratch 2834scrub scratch: 2835 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2836 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2837 touch auto/config.h 2838 cp config.mk.dist auto/config.mk 2839 2840distclean: clean scratch 2841 -rm -f tags 2842 2843dist: distclean 2844 @echo 2845 @echo Making the distribution has to be done in the top directory 2846 2847mdepend: 2848 -@rm -f Makefile~ 2849 cp Makefile Makefile~ 2850 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2851 @for i in $(ALL_SRC) ; do \ 2852 echo "$$i" ; \ 2853 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2854 $(CPP) $$i |\ 2855 grep '^# .*"\./.*\.h"' |\ 2856 sort -t'"' -u +1 -2 |\ 2857 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2858 ` >> tmp_make ; \ 2859 done 2860 mv tmp_make Makefile 2861 2862depend: 2863 -@rm -f Makefile~ 2864 cp Makefile Makefile~ 2865 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2866 -for i in $(ALL_SRC); do echo $$i; \ 2867 $(CPP_DEPEND) $$i | \ 2868 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2869 mv tmp_make Makefile 2870 2871# Run lint. Clean up the *.ln files that are sometimes left behind. 2872lint: 2873 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2874 -rm -f *.ln 2875 2876# Check dosinst.c with lint. 2877lintinstall: 2878 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2879 -rm -f dosinst.ln 2880 2881########################################################################### 2882 2883.c.o: 2884 $(CCC) $< 2885 2886auto/if_perl.c: if_perl.xs 2887 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2888 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2889 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2890 2891auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2892 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2893 2894auto/pathdef.c: Makefile auto/config.mk 2895 -@echo creating $@ 2896 -@echo '/* pathdef.c */' > $@ 2897 -@echo '/* This file is automatically created by Makefile' >> $@ 2898 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2899 -@echo '#include "vim.h"' >> $@ 2900 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2901 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2902 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2903 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2904 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2905 -@if test -n "$(COMPILEDBY)"; then \ 2906 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2907 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2908 -@echo '";' >> $@ 2909 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2910 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2911 -@echo '";' >> $@ 2912 -@sh $(srcdir)/pathdef.sh 2913 2914GUI_GTK_RES_INPUTS = \ 2915 ../pixmaps/stock_vim_build_tags.png \ 2916 ../pixmaps/stock_vim_find_help.png \ 2917 ../pixmaps/stock_vim_save_all.png \ 2918 ../pixmaps/stock_vim_session_load.png \ 2919 ../pixmaps/stock_vim_session_new.png \ 2920 ../pixmaps/stock_vim_session_save.png \ 2921 ../pixmaps/stock_vim_shell.png \ 2922 ../pixmaps/stock_vim_window_maximize.png \ 2923 ../pixmaps/stock_vim_window_maximize_width.png \ 2924 ../pixmaps/stock_vim_window_minimize.png \ 2925 ../pixmaps/stock_vim_window_minimize_width.png \ 2926 ../pixmaps/stock_vim_window_split.png \ 2927 ../pixmaps/stock_vim_window_split_vertical.png 2928 2929auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2930 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2931auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2932 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2933 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2934 fi 2935 2936# All the object files are put in the "objects" directory. Since not all make 2937# commands understand putting object files in another directory, it must be 2938# specified for each file separately. 2939 2940objects: objects/.dirstamp 2941 2942objects/.dirstamp: 2943 mkdir -p objects 2944 touch objects/.dirstamp 2945 2946# All object files depend on the objects directory, so that parallel make 2947# works. Can't depend on the directory itself, its timestamp changes all the 2948# time. 2949$(ALL_OBJ): objects/.dirstamp 2950 2951objects/arabic.o: arabic.c 2952 $(CCC) -o $@ arabic.c 2953 2954objects/blowfish.o: blowfish.c 2955 $(CCC) -o $@ blowfish.c 2956 2957objects/buffer.o: buffer.c 2958 $(CCC) -o $@ buffer.c 2959 2960objects/charset.o: charset.c 2961 $(CCC) -o $@ charset.c 2962 2963objects/crypt.o: crypt.c 2964 $(CCC) -o $@ crypt.c 2965 2966objects/crypt_zip.o: crypt_zip.c 2967 $(CCC) -o $@ crypt_zip.c 2968 2969objects/dict.o: dict.c 2970 $(CCC) -o $@ dict.c 2971 2972objects/diff.o: diff.c 2973 $(CCC) -o $@ diff.c 2974 2975objects/digraph.o: digraph.c 2976 $(CCC) -o $@ digraph.c 2977 2978objects/edit.o: edit.c 2979 $(CCC) -o $@ edit.c 2980 2981objects/eval.o: eval.c 2982 $(CCC) -o $@ eval.c 2983 2984objects/evalfunc.o: evalfunc.c 2985 $(CCC) -o $@ evalfunc.c 2986 2987objects/ex_cmds.o: ex_cmds.c 2988 $(CCC) -o $@ ex_cmds.c 2989 2990objects/ex_cmds2.o: ex_cmds2.c 2991 $(CCC) -o $@ ex_cmds2.c 2992 2993objects/ex_docmd.o: ex_docmd.c 2994 $(CCC) -o $@ ex_docmd.c 2995 2996objects/ex_eval.o: ex_eval.c 2997 $(CCC) -o $@ ex_eval.c 2998 2999objects/ex_getln.o: ex_getln.c 3000 $(CCC) -o $@ ex_getln.c 3001 3002objects/farsi.o: farsi.c 3003 $(CCC) -o $@ farsi.c 3004 3005objects/fileio.o: fileio.c 3006 $(CCC) -o $@ fileio.c 3007 3008objects/fold.o: fold.c 3009 $(CCC) -o $@ fold.c 3010 3011objects/getchar.o: getchar.c 3012 $(CCC) -o $@ getchar.c 3013 3014objects/hardcopy.o: hardcopy.c 3015 $(CCC) -o $@ hardcopy.c 3016 3017objects/hashtab.o: hashtab.c 3018 $(CCC) -o $@ hashtab.c 3019 3020objects/gui.o: gui.c 3021 $(CCC) -o $@ gui.c 3022 3023objects/gui_at_fs.o: gui_at_fs.c 3024 $(CCC) -o $@ gui_at_fs.c 3025 3026objects/gui_at_sb.o: gui_at_sb.c 3027 $(CCC) -o $@ gui_at_sb.c 3028 3029objects/gui_athena.o: gui_athena.c 3030 $(CCC) -o $@ gui_athena.c 3031 3032objects/gui_beval.o: gui_beval.c 3033 $(CCC) -o $@ gui_beval.c 3034 3035objects/gui_gtk.o: gui_gtk.c 3036 $(CCC) -o $@ gui_gtk.c 3037 3038objects/gui_gtk_f.o: gui_gtk_f.c 3039 $(CCC) -o $@ gui_gtk_f.c 3040 3041objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3042 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3043 3044objects/gui_gtk_x11.o: gui_gtk_x11.c 3045 $(CCC) -o $@ gui_gtk_x11.c 3046 3047objects/gui_motif.o: gui_motif.c 3048 $(CCC) -o $@ gui_motif.c 3049 3050objects/gui_xmdlg.o: gui_xmdlg.c 3051 $(CCC) -o $@ gui_xmdlg.c 3052 3053objects/gui_xmebw.o: gui_xmebw.c 3054 $(CCC) -o $@ gui_xmebw.c 3055 3056objects/gui_x11.o: gui_x11.c 3057 $(CCC) -o $@ gui_x11.c 3058 3059objects/gui_photon.o: gui_photon.c 3060 $(CCC) -o $@ gui_photon.c 3061 3062objects/gui_mac.o: gui_mac.c 3063 $(CCC) -o $@ gui_mac.c 3064 3065objects/hangulin.o: hangulin.c 3066 $(CCC) -o $@ hangulin.c 3067 3068objects/if_cscope.o: if_cscope.c 3069 $(CCC) -o $@ if_cscope.c 3070 3071objects/if_xcmdsrv.o: if_xcmdsrv.c 3072 $(CCC) -o $@ if_xcmdsrv.c 3073 3074objects/if_lua.o: if_lua.c 3075 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3076 3077objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3078 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3079 3080mzscheme_base.c: 3081 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3082 3083objects/if_perl.o: auto/if_perl.c 3084 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3085 3086objects/if_perlsfio.o: if_perlsfio.c 3087 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3088 3089objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 3090 $(CCC_NF) $(PYTHON_CFLAGS) $(ALL_CFLAGS) -o $@ \ 3091 $(PYTHON_CONFDIR)/getpath.c \ 3092 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 3093 $(PYTHON_GETPATH_CFLAGS) 3094 3095objects/if_python.o: if_python.c if_py_both.h 3096 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3097 3098objects/if_python3.o: if_python3.c if_py_both.h 3099 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3100 3101objects/if_ruby.o: if_ruby.c 3102 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3103 3104objects/if_tcl.o: if_tcl.c 3105 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3106 3107objects/integration.o: integration.c 3108 $(CCC) -o $@ integration.c 3109 3110objects/json.o: json.c 3111 $(CCC) -o $@ json.c 3112 3113objects/json_test.o: json_test.c 3114 $(CCC) -o $@ json_test.c 3115 3116objects/kword_test.o: kword_test.c 3117 $(CCC) -o $@ kword_test.c 3118 3119objects/list.o: list.c 3120 $(CCC) -o $@ list.c 3121 3122objects/main.o: main.c 3123 $(CCC) -o $@ main.c 3124 3125objects/mark.o: mark.c 3126 $(CCC) -o $@ mark.c 3127 3128objects/memfile.o: memfile.c 3129 $(CCC) -o $@ memfile.c 3130 3131objects/memfile_test.o: memfile_test.c 3132 $(CCC) -o $@ memfile_test.c 3133 3134objects/memline.o: memline.c 3135 $(CCC) -o $@ memline.c 3136 3137objects/menu.o: menu.c 3138 $(CCC) -o $@ menu.c 3139 3140objects/message.o: message.c 3141 $(CCC) -o $@ message.c 3142 3143objects/message_test.o: message_test.c 3144 $(CCC) -o $@ message_test.c 3145 3146objects/misc1.o: misc1.c 3147 $(CCC) -o $@ misc1.c 3148 3149objects/misc2.o: misc2.c 3150 $(CCC) -o $@ misc2.c 3151 3152objects/move.o: move.c 3153 $(CCC) -o $@ move.c 3154 3155objects/mbyte.o: mbyte.c 3156 $(CCC) -o $@ mbyte.c 3157 3158objects/normal.o: normal.c 3159 $(CCC) -o $@ normal.c 3160 3161objects/ops.o: ops.c 3162 $(CCC) -o $@ ops.c 3163 3164objects/option.o: option.c 3165 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3166 3167objects/os_beos.o: os_beos.c 3168 $(CCC) -o $@ os_beos.c 3169 3170objects/os_qnx.o: os_qnx.c 3171 $(CCC) -o $@ os_qnx.c 3172 3173objects/os_macosx.o: os_macosx.m 3174 $(CCC) -o $@ os_macosx.m 3175 3176objects/os_mac_conv.o: os_mac_conv.c 3177 $(CCC) -o $@ os_mac_conv.c 3178 3179objects/os_unix.o: os_unix.c 3180 $(CCC) -o $@ os_unix.c 3181 3182objects/os_mswin.o: os_mswin.c 3183 $(CCC) -o $@ os_mswin.c 3184 3185objects/winclip.o: winclip.c 3186 $(CCC) -o $@ winclip.c 3187 3188objects/pathdef.o: auto/pathdef.c 3189 $(CCC) -o $@ auto/pathdef.c 3190 3191objects/pty.o: pty.c 3192 $(CCC) -o $@ pty.c 3193 3194objects/popupmnu.o: popupmnu.c 3195 $(CCC) -o $@ popupmnu.c 3196 3197objects/quickfix.o: quickfix.c 3198 $(CCC) -o $@ quickfix.c 3199 3200objects/regexp.o: regexp.c regexp_nfa.c 3201 $(CCC) -o $@ regexp.c 3202 3203objects/screen.o: screen.c 3204 $(CCC) -o $@ screen.c 3205 3206objects/search.o: search.c 3207 $(CCC) -o $@ search.c 3208 3209objects/sha256.o: sha256.c 3210 $(CCC) -o $@ sha256.c 3211 3212objects/spell.o: spell.c 3213 $(CCC) -o $@ spell.c 3214 3215objects/spellfile.o: spellfile.c 3216 $(CCC) -o $@ spellfile.c 3217 3218objects/syntax.o: syntax.c 3219 $(CCC) -o $@ syntax.c 3220 3221objects/tag.o: tag.c 3222 $(CCC) -o $@ tag.c 3223 3224objects/term.o: term.c 3225 $(CCC) -o $@ term.c 3226 3227objects/ui.o: ui.c 3228 $(CCC) -o $@ ui.c 3229 3230objects/undo.o: undo.c 3231 $(CCC) -o $@ undo.c 3232 3233objects/userfunc.o: userfunc.c 3234 $(CCC) -o $@ userfunc.c 3235 3236objects/window.o: window.c 3237 $(CCC) -o $@ window.c 3238 3239objects/workshop.o: workshop.c 3240 $(CCC) -o $@ workshop.c 3241 3242objects/wsdebug.o: wsdebug.c 3243 $(CCC) -o $@ wsdebug.c 3244 3245objects/netbeans.o: netbeans.c 3246 $(CCC) -o $@ netbeans.c 3247 3248objects/channel.o: channel.c 3249 $(CCC) -o $@ channel.c 3250 3251Makefile: 3252 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3253 3254############################################################################### 3255### MacOS X installation 3256### 3257### This installs a runnable Vim.app in $(prefix) 3258 3259REZ = /Developer/Tools/Rez 3260RESDIR = $(APPDIR)/Contents/Resources 3261VERSION = $(VIMMAJOR).$(VIMMINOR) 3262 3263### Common flags 3264M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3265 -DAPP_VER=$(VERSION) 3266 3267install_macosx: gui_bundle 3268# Remove the link to the runtime dir, don't want to copy all of that. 3269 -rm $(RESDIR)/vim/runtime 3270 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3271# Generate the help tags file now, it won't work with "make installruntime". 3272 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3273# Install the runtime files. Recursive! 3274 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3275# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 3276 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3277 VIMEXE=$$srcdir/$(VIMTARGET) \ 3278 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3279 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3280 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3281 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3282 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3283# Put the link back. 3284 ln -s `pwd`/../runtime $(RESDIR)/vim 3285# Copy rgb.txt, Mac doesn't always have X11 3286 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3287# TODO: Create the vimtutor and/or gvimtutor application. 3288 3289gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3290 bundle-language 3291 3292$(RESDIR): 3293 mkdir -p $@ 3294 3295bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3296# Make a link to the runtime directory, so that we can try out the executable 3297# without installing it. 3298 mkdir -p $(RESDIR)/vim 3299 -ln -s `pwd`/../runtime $(RESDIR)/vim 3300 3301bundle-executable: $(VIMTARGET) 3302 mkdir -p $(APPDIR)/Contents/MacOS 3303 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3304 3305bundle-info: bundle-dir 3306 @echo "Creating PkgInfo" 3307 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3308 @echo "Creating Info.plist" 3309 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3310 3311bundle-resource: bundle-dir bundle-rsrc 3312 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3313 3314### Classic resources 3315# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3316# This file is also required for OS X Vim. 3317bundle-rsrc: os_mac.rsr.hqx 3318 @echo "Creating resource fork" 3319 python dehqx.py $< 3320 rm -f gui_mac.rsrc 3321 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3322 3323# po/Make_osx.pl says something about generating a Mac message file 3324# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3325# *really* be upset that Carbon Vim was not localised in 3326# Ukrainian? 3327# 3328#bundle-language: bundle-dir po/Make_osx.pl 3329# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3330bundle-language: bundle-dir 3331 3332$(APPDIR)/Contents: 3333 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 3334 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 3335 3336 3337############################################################################### 3338### (automatically generated by 'make depend') 3339### Dependencies: 3340objects/arabic.o: arabic.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3341 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3342 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3343 globals.h farsi.h arabic.h 3344objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 3345 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3346 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3347 proto.h globals.h farsi.h arabic.h 3348objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3349 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3350 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3351 globals.h farsi.h arabic.h version.h 3352objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3353 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3354 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3355 globals.h farsi.h arabic.h 3356objects/crypt.o: crypt.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3357 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3358 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3359 globals.h farsi.h arabic.h 3360objects/crypt_zip.o: crypt_zip.c vim.h auto/config.h feature.h os_unix.h \ 3361 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3362 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3363 proto.h globals.h farsi.h arabic.h 3364objects/dict.o: dict.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3365 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3366 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3367 globals.h farsi.h arabic.h 3368objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3369 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3370 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3371 globals.h farsi.h arabic.h 3372objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3373 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3374 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3375 globals.h farsi.h arabic.h 3376objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3377 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3378 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3379 globals.h farsi.h arabic.h 3380objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3381 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3382 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3383 globals.h farsi.h arabic.h version.h 3384objects/evalfunc.o: evalfunc.c vim.h auto/config.h feature.h os_unix.h \ 3385 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3386 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3387 proto.h globals.h farsi.h arabic.h version.h 3388objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3389 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3390 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3391 globals.h farsi.h arabic.h version.h 3392objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 3393 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3394 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3395 proto.h globals.h farsi.h arabic.h version.h 3396objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 3397 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3398 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3399 proto.h globals.h farsi.h arabic.h 3400objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3401 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3402 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3403 globals.h farsi.h arabic.h 3404objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 3405 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3406 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3407 proto.h globals.h farsi.h arabic.h 3408objects/farsi.o: farsi.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3409 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3410 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3411 globals.h farsi.h arabic.h 3412objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3413 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3414 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3415 globals.h farsi.h arabic.h 3416objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3417 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3418 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3419 globals.h farsi.h arabic.h 3420objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3421 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3422 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3423 globals.h farsi.h arabic.h 3424objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 3425 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3426 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3427 proto.h globals.h farsi.h arabic.h version.h 3428objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3429 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3430 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3431 globals.h farsi.h arabic.h 3432objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 3433 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3434 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3435 proto.h globals.h farsi.h arabic.h if_cscope.h 3436objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 3437 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3438 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3439 proto.h globals.h farsi.h arabic.h version.h 3440objects/json.o: json.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3441 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3442 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3443 globals.h farsi.h arabic.h 3444objects/list.o: list.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3445 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3446 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3447 globals.h farsi.h arabic.h 3448objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3449 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3450 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3451 globals.h farsi.h arabic.h 3452objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3453 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3454 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3455 globals.h farsi.h arabic.h 3456objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3457 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3458 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3459 globals.h farsi.h arabic.h 3460objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3461 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3462 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3463 globals.h farsi.h arabic.h 3464objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3465 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3466 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3467 globals.h farsi.h arabic.h 3468objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3469 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3470 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3471 globals.h farsi.h arabic.h 3472objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3473 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3474 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3475 globals.h farsi.h arabic.h version.h 3476objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3477 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3478 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3479 globals.h farsi.h arabic.h 3480objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3481 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3482 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3483 globals.h farsi.h arabic.h 3484objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3485 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3486 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3487 globals.h farsi.h arabic.h 3488objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3489 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3490 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3491 globals.h farsi.h arabic.h 3492objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3493 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3494 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3495 arabic.h 3496objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3497 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3498 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3499 globals.h farsi.h arabic.h 3500objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3501 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3502 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3503 globals.h farsi.h arabic.h if_mzsch.h os_unixx.h 3504objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 3505 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3506 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3507 proto.h globals.h farsi.h arabic.h 3508objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 3509 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3510 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3511 proto.h globals.h farsi.h arabic.h 3512objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 3513 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3514 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3515 proto.h globals.h farsi.h arabic.h 3516objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3517 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3518 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3519 globals.h farsi.h arabic.h regexp_nfa.c 3520objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3521 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3522 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3523 globals.h farsi.h arabic.h 3524objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3525 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3526 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3527 globals.h farsi.h arabic.h 3528objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3529 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3530 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3531 globals.h farsi.h arabic.h 3532objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3533 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3534 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3535 globals.h farsi.h arabic.h 3536objects/spellfile.o: spellfile.c vim.h auto/config.h feature.h os_unix.h \ 3537 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3538 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3539 proto.h globals.h farsi.h arabic.h 3540objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3541 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3542 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3543 globals.h farsi.h arabic.h 3544objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3545 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3546 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3547 arabic.h 3548objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3549 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3550 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3551 globals.h farsi.h arabic.h 3552objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3553 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3554 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3555 arabic.h 3556objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3557 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3558 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3559 globals.h farsi.h arabic.h 3560objects/userfunc.o: userfunc.c vim.h auto/config.h feature.h os_unix.h \ 3561 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3562 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3563 proto.h globals.h farsi.h arabic.h 3564objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3565 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3566 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3567 globals.h farsi.h arabic.h version.h 3568objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3569 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3570 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3571 globals.h farsi.h arabic.h 3572objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3573 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3574 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3575 arabic.h 3576objects/gui_gtk.o: gui_gtk.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3577 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3578 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3579 globals.h farsi.h arabic.h gui_gtk_f.h 3580objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 3581 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3582 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3583 proto.h globals.h farsi.h arabic.h gui_gtk_f.h 3584objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 3585 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3586 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3587 proto.h globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3588 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3589 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3590 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3591 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3592 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3593 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3594 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3595 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3596 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3597 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3598 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3599 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3600 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3601 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3602 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3603 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3604 ../pixmaps/tb_minwidth.xpm 3605objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 3606 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3607 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3608 proto.h globals.h farsi.h arabic.h 3609objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 3610 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3611 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3612 proto.h globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3613objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 3614 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3615 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3616 proto.h globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3617 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3618 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3619 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3620 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3621 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3622 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3623 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3624 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3625 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3626 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3627 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3628 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3629 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3630 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3631 ../pixmaps/tb_minwidth.xpm 3632objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 3633 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3634 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3635 proto.h globals.h farsi.h arabic.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3636 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3637objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3638 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3639 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3640 globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \ 3641 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3642objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3643 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3644 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3645 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3646objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3647 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3648 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3649 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3650objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3651 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3652 proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h globals.h farsi.h \ 3653 arabic.h 3654objects/json_test.o: json_test.c main.c vim.h auto/config.h feature.h os_unix.h \ 3655 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3656 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3657 proto.h globals.h farsi.h arabic.h json.c 3658objects/kword_test.o: kword_test.c main.c vim.h auto/config.h feature.h os_unix.h \ 3659 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3660 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3661 proto.h globals.h farsi.h arabic.h charset.c mbyte.c 3662objects/memfile_test.o: memfile_test.c main.c vim.h auto/config.h feature.h \ 3663 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3664 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3665 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h memfile.c 3666objects/message_test.o: message_test.c main.c vim.h auto/config.h feature.h \ 3667 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3668 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3669 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h message.c 3670objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3671 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3672 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3673 proto.h globals.h farsi.h arabic.h 3674objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3675 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3676 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3677 globals.h farsi.h arabic.h 3678objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3679 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3680 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3681 proto.h globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3682objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3683 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3684 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3685 proto.h globals.h farsi.h arabic.h 3686objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3687 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3688 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3689 proto.h globals.h farsi.h arabic.h 3690objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3691 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3692 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3693 proto.h globals.h farsi.h arabic.h if_py_both.h 3694objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3695 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3696 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3697 proto.h globals.h farsi.h arabic.h if_py_both.h 3698objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3699 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3700 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3701 globals.h farsi.h arabic.h 3702objects/if_ruby.o: if_ruby.c auto/config.h vim.h feature.h os_unix.h auto/osdef.h \ 3703 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3704 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3705 globals.h farsi.h arabic.h version.h 3706objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3707 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3708 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3709 proto.h globals.h farsi.h arabic.h 3710objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3711 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3712 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3713 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h version.h \ 3714 workshop.h 3715objects/wsdebug.o: wsdebug.c 3716objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3717 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3718 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3719 proto.h globals.h farsi.h arabic.h integration.h 3720objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3721 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3722 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h \ 3723 proto.h globals.h farsi.h arabic.h version.h 3724objects/channel.o: channel.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3725 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3726 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h spell.h proto.h \ 3727 globals.h farsi.h arabic.h 3728objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3729
