1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 235# Sun curses library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284######################## auto/config.mk ######################## {{{1 285# At this position auto/config.mk is included. When starting from the 286# toplevel Makefile it is almost empty. After running auto/configure it 287# contains settings that have been discovered for your system. Settings below 288# this include override settings in auto/config.mk! 289 290# Note: If make fails because auto/config.mk does not exist (it is not 291# included in the repository), do: 292# cp config.mk.dist auto/config.mk 293 294# (X) How to include auto/config.mk depends on the version of "make" you have, 295# if the current choice doesn't work, try the other one. 296 297include auto/config.mk 298#.include "auto/config.mk" 299CClink = $(CC) 300 301#}}} 302 303# Include the configuration choices first, so we can override everything 304# below. As shipped, this file contains a target that causes to run 305# configure. Once configure was run, this file contains a list of 306# make variables with predefined values instead. Thus any second invocation 307# of make, will build Vim. 308 309# CONFIGURE - configure arguments {{{1 310# You can give a lot of options to configure. 311# Change this to your desire and do 'make config' afterwards 312 313# examples (can only use one!): 314#CONF_ARGS = --exec-prefix=/usr 315#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 316#CONF_ARGS = --with-global-runtime=/etc/vim 317#CONF_ARGS = --with-local-dir=/usr/share 318#CONF_ARGS = --without-local-dir 319 320# Use this one if you distribute a modified version of Vim. 321#CONF_ARGS = --with-modified-by="John Doe" 322 323# GUI - For creating Vim with GUI (gvim) (B) 324# Uncomment this line when you don't want to get the GUI version, although you 325# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 326# at all. 327#CONF_OPT_GUI = --disable-gui 328 329# Uncomment one of these lines if you have that GUI but don't want to use it. 330# The automatic check will use another one that can be found. 331# Gnome is disabled by default, it may cause trouble. 332#CONF_OPT_GUI = --disable-gtk2-check 333#CONF_OPT_GUI = --enable-gnome2-check 334#CONF_OPT_GUI = --disable-motif-check 335#CONF_OPT_GUI = --disable-athena-check 336#CONF_OPT_GUI = --disable-nextaw-check 337 338# Uncomment one of these lines to select a specific GUI to use. 339# When using "yes" or nothing, configure will use the first one found: GTK+, 340# Motif or Athena. 341# 342# GTK versions that are known not to work 100% are rejected. 343# Use "--disable-gtktest" to accept them anyway. 344# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 345# 346# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 347# is used then GNOME will automatically be used if it is found. If you have 348# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 349# --enable-gui=gtk or leave out --enable-gnome-check. 350# 351# If the selected GUI isn't found, the GUI is disabled automatically 352#CONF_OPT_GUI = --enable-gui=gtk2 353#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 354#CONF_OPT_GUI = --enable-gui=gnome2 355#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 356#CONF_OPT_GUI = --enable-gui=motif 357#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 358#CONF_OPT_GUI = --enable-gui=athena 359#CONF_OPT_GUI = --enable-gui=nextaw 360 361# Carbon GUI for Mac OS X 362#CONF_OPT_GUI = --enable-gui=carbon 363 364# DARWIN - detecting Mac OS X 365# Uncomment this line when you want to compile a Unix version of Vim on 366# Darwin. None of the Mac specific options or files will be used. 367#CONF_OPT_DARWIN = --disable-darwin 368 369# Select the architecture supported. Default is to build for the current 370# platform. Use "both" for a universal binary. That probably doesn't work 371# when including Perl, Python, etc. 372#CONF_OPT_DARWIN = --with-mac-arch=i386 373#CONF_OPT_DARWIN = --with-mac-arch=ppc 374#CONF_OPT_DARWIN = --with-mac-arch=both 375 376# LUA 377# Uncomment one of these when you want to include the Lua interface. 378# First one is for static linking, second one for dynamic loading. 379#CONF_OPT_LUA = --enable-luainterp 380#CONF_OPT_LUA = --enable-luainterp=dynamic 381# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 382#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 383 384# MZSCHEME 385# Uncomment this when you want to include the MzScheme interface. 386#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 387# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 388#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 389#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 390#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 391 392# Uncomment the next line to fail if one of the requested language interfaces 393# cannot be configured. Without this Vim will be build anyway, without 394# the failing interfaces. 395#CONF_OPT_FAIL = --enable-fail-if-missing 396 397# PERL 398# Uncomment one of these when you want to include the Perl interface. 399# First one is for static linking, second one for dynamic loading. 400# The Perl option sometimes causes problems, because it adds extra flags 401# 402# to the command line. If you see strange flags during compilation, check in 403# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 404# the next line. 405# When you get an error for a missing "perl.exp" file, try creating an empty 406# one: "touch perl.exp". 407# This requires at least "small" features, "tiny" doesn't work. 408#CONF_OPT_PERL = --enable-perlinterp 409#CONF_OPT_PERL = --enable-perlinterp=dynamic 410 411# PYTHON 412# Uncomment this when you want to include the Python interface. 413# NOTE: This may cause threading to be enabled, which has side effects (such 414# as using different libraries and debugging becomes more difficult). 415# NOTE: Using this together with Perl may cause a crash in initialization. 416# For Python3 support make a symbolic link in /usr/local/bin: 417# ln -s python3 python3.1 418# If both python2.x and python3.x are enabled then the linking will be via 419# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 420# However, this may still cause problems, such as "import termios" failing. 421# Build two separate versions of Vim in that case. 422#CONF_OPT_PYTHON = --enable-pythoninterp 423#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 424#CONF_OPT_PYTHON3 = --enable-python3interp 425#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 426 427# RUBY 428# Uncomment this when you want to include the Ruby interface. 429# First one for static linking, second one for loading when used. 430# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 431#CONF_OPT_RUBY = --enable-rubyinterp 432#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 433#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 434 435# TCL 436# Uncomment this when you want to include the Tcl interface. 437#CONF_OPT_TCL = --enable-tclinterp 438#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 439 440# CSCOPE 441# Uncomment this when you want to include the Cscope interface. 442#CONF_OPT_CSCOPE = --enable-cscope 443 444# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 445#CONF_OPT_WORKSHOP = --enable-workshop 446 447# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 448# Motif version must have XPM libraries (see |workshop-xpm|). 449# Uncomment this when you do not want the netbeans interface. 450#CONF_OPT_NETBEANS = --disable-netbeans 451 452# SNIFF - Include support for SNiFF+. 453#CONF_OPT_SNIFF = --enable-sniff 454 455# MULTIBYTE - To edit multi-byte characters. 456# Uncomment this when you want to edit a multibyte language. 457# It's automatically enabled with normal features, GTK or IME support. 458# Note: Compile on a machine where setlocale() actually works, otherwise the 459# configure tests may fail. 460#CONF_OPT_MULTIBYTE = --enable-multibyte 461 462# NLS - National Language Support 463# Uncomment this when you do not want to support translated messages, even 464# though configure can find support for it. 465#CONF_OPT_NLS = --disable-nls 466 467# XIM - X Input Method. Special character input support for X11 (Chinese, 468# Japanese, special symbols, etc). Also needed for dead-key support. 469# When omitted it's automatically enabled for the X-windows GUI. 470# HANGUL - Input Hangul (Korean) language using internal routines. 471# Uncomment one of these when you want to input a multibyte language. 472#CONF_OPT_INPUT = --enable-xim 473#CONF_OPT_INPUT = --disable-xim 474#CONF_OPT_INPUT = --enable-hangulinput 475 476# FONTSET - X fontset support for output of languages with many characters. 477# Uncomment this when you want to output a multibyte language. 478#CONF_OPT_OUTPUT = --enable-fontset 479 480# ACL - Uncomment this when you do not want to include ACL support, even 481# though your system does support it. E.g., when it's buggy. 482#CONF_OPT_ACL = --disable-acl 483 484# gpm - For mouse support on Linux console via gpm 485# Uncomment this when you do not want to include gpm support, even 486# though you have gpm libraries and includes. 487#CONF_OPT_GPM = --disable-gpm 488 489# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 490# Uncomment this when you do not want do include sysmouse support, even 491# though you have /dev/sysmouse and includes. 492#CONF_OPT_SYSMOUSE = --disable-sysmouse 493 494# FEATURES - For creating Vim with more or less features 495# Uncomment one of these lines when you want to include few to many features. 496# The default is "normal". 497#CONF_OPT_FEAT = --with-features=tiny 498#CONF_OPT_FEAT = --with-features=small 499#CONF_OPT_FEAT = --with-features=normal 500#CONF_OPT_FEAT = --with-features=big 501#CONF_OPT_FEAT = --with-features=huge 502 503# COMPILED BY - For including a specific e-mail address for ":version". 504#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 505 506# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 507# (otherwise Vim configure will try to include xterm titlebar access) 508# Also disable the GUI above, otherwise it will be included anyway. 509# When both GUI and X11 have been disabled this may save about 15% of the 510# code and make Vim startup quicker. 511#CONF_OPT_X = --without-x 512 513# X WINDOWS DIRECTORY - specify X directories 514# If configure can't find you X stuff, or if you have multiple X11 derivatives 515# installed, you may wish to specify which one to use. 516# Select nothing to let configure choose. 517# This here selects openwin (as found on sun). 518#XROOT = /usr/openwin 519#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 520 521# X11 Session Management Protocol support 522# Vim will try to use XSMP to catch the user logging out if there are unsaved 523# files. Uncomment this line to disable that (it prevents vim trying to open 524# communications with the session manager). 525#CONF_OPT_XSMP = --disable-xsmp 526 527# You may wish to include xsmp but use exclude xsmp-interact if the logout 528# XSMP functionality does not work well with your session-manager (at time of 529# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 530# applications after Vim has cancelled a logout (until Vim quits). This 531# *might* be the Vim code, but is more likely a bug in early GNOME-1. 532# This disables the dialog that asks you if you want to save files or not. 533#CONF_OPT_XSMP = --disable-xsmp-interact 534 535# COMPILER - Name of the compiler {{{1 536# The default from configure will mostly be fine, no need to change this, just 537# an example. If a compiler is defined here, configure will use it rather than 538# probing for one. It is dangerous to change this after configure was run. 539# Make will use your choice then -- but beware: Many things may change with 540# another compiler. It is wise to run 'make reconfig' to start all over 541# again. 542#CC = cc 543#CC = gcc 544 545# COMPILER FLAGS - change as you please. Either before running {{{1 546# configure or afterwards. For examples see below. 547# When using -g with some older versions of Linux you might get a 548# statically linked executable. 549# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 550#CFLAGS = -g 551#CFLAGS = -O 552 553# Optimization limits - depends on the compiler. Automatic check in configure 554# doesn't work very well, because many compilers only give a warning for 555# unrecognized arguments. 556#CFLAGS = -O -OPT:Olimit=2600 557#CFLAGS = -O -Olimit 2000 558#CFLAGS = -O -FOlimit,2000 559 560# Often used for GCC: mixed optimizing, lot of optimizing, debugging 561#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 562#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 563#CFLAGS = -g -Wall -Wmissing-prototypes 564#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 565#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 566#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 567 568# Use this with GCC to check for mistakes, unused arguments, etc. 569#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 570#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG 571#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 572#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 573 574# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 575# allocated memory (and makes every malloc()/free() very slow). 576# Electric Fence is free (search ftp sites). 577# You may want to set the EF_PROTECT_BELOW environment variable to check the 578# other side of allocated memory. 579# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 580# as root: sysctl -w vm.max_proc_mmap=30000 581#EXTRA_LIBS = /usr/local/lib/libefence.a 582 583# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 584#PURIFY = purify 585 586# NBDEBUG - debugging the netbeans interface. 587#EXTRA_DEFS = -DNBDEBUG 588 589# }}} 590 591# LINT - for running lint 592# For standard Unix lint 593LINT = lint 594LINT_OPTIONS = -beprxzF 595# For splint 596# It doesn't work well, crashes on include files and non-ascii characters. 597#LINT = splint 598#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 599 600# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 601# Might not work with GUI or Perl. 602# For unknown reasons adding "-lc" fixes a linking problem with some versions 603# of GCC. That's probably a bug in the "-pg" implementation. 604# After running Vim see the profile result with: gprof vim gmon.out | vim - 605# Need to recompile everything after changing this: "make clean" "make". 606#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 607#PROFILE_LIBS = -pg 608#PROFILE_LIBS = -pg -lc 609 610# MEMORY LEAK DETECTION 611# Requires installing the ccmalloc library. 612# Configuration is in the .ccmalloc or ~/.ccmalloc file. 613# Doesn't work very well, since memory linked to from global variables 614# (in libraries) is also marked as leaked memory. 615#LEAK_CFLAGS = -DEXITFREE 616#LEAK_LIBS = -lccmalloc 617 618##################################################### 619### Specific systems, check if yours is listed! ### {{{ 620##################################################### 621 622### Uncomment things here only if the values chosen by configure are wrong. 623### It's better to adjust configure.in and "make autoconf", if you can! 624### Then send the required changes to configure.in to the bugs list. 625 626### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 627### 628#CC = shlicc2 629#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 630 631### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 632### The first probably works on all systems 633### The second should work a bit better on newer systems 634### The third should work a bit better on HPUX 11.11 635### Information provided by: Richard Allen <[email protected]> 636#CC = c89 -D_HPUX_SOURCE 637#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 638#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 639 640### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 641### when the default (ISO) digraphs look completely wrong. 642### After changing this do "touch digraph.c; make". 643#EXTRA_DEFS = -DHPUX_DIGRAPHS 644 645### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 646### is too small to compile many routines. It produces too much defining 647### and no space errors. 648### Uncomment the following to specify a larger macro definition table. 649#CFLAGS = -Wp,-H256000 650 651### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 652### libraries in /usr/lib instead of /lib (avoiding transition links). 653### Information provided by: David Green 654#XROOT = /usr 655#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 656#GUI_INC_LOC = -I/usr/include/Motif1.2 657#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 658 659### (5) AIX 4.1.4 with cc 660#CFLAGS = -O -qmaxmem=8192 661 662### AIX with c89 (Walter Briscoe) 663#CC = c89 664#CPPFLAGS = -D_ALL_SOURCE 665 666### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 667# needed to avoid a problem where strings.h gets included 668#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 669 670### (W) Solaris with multi-threaded libraries (-lthread): 671### If suspending doesn't work properly, try using this line: 672#EXTRA_DEFS = -D_REENTRANT 673 674### (7) Solaris 2.4/2.5 with Centerline compiler 675#CC = clcc 676#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 677#CFLAGS = -O 678 679### (9) Solaris 2.x with cc (SunPro), using Athena. 680### Only required for compiling gui_at_sb.c. 681### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 682### Use one of the lines (either Full ANSI or no ANSI at all) 683#CFLAGS = $(CFLAGS) -Xc 684#CFLAGS = $(CFLAGS) -Xs 685 686### Solaris 2.3 with X11 and specific cc 687#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 688 689### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 690#CC = /usr/ucb/cc 691#EXTRA_LIBS = -R/usr/ucblib 692 693### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 694# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 695#CC = cc 696#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 697#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 698#XPM_IPATH = -I$(XPM_DIR)/include 699#EXTRA_LIBS = $(XPM_LIB) 700#EXTRA_IPATHS = $(XPM_IPATH) 701#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 702 703### Solaris with workshop compilers: Vim is unstable when compiled with 704# "-fast". Use this instead. (Shea Martin) 705#CFLAGS = -x02 -xtarget=ultra 706 707### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 708#LDFLAGS = -lw -ldl -lXmu 709#GUI_LIB_LOC = -L/usr/local/lib 710 711### (8) Unisys 6035 (Glauber Ribeiro) 712#EXTRA_LIBS = -lnsl -lsocket -lgen 713 714### When builtin functions cause problems with gcc (for Sun 4.1.x) 715#CFLAGS = -O2 -Wall -traditional -Wno-implicit 716 717### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 718#EXTRA_DEFS = -DDOMAIN 719#CFLAGS= -O -A systype,bsd4.3 720 721### Coherent 4.2.10 on Intel 386 platform 722#EXTRA_DEFS = -Dvoid=int 723#EXTRA_LIBS = -lterm -lsocket 724 725### SCO 3.2, with different library name for terminfo 726#EXTRA_LIBS = -ltinfo 727 728### UTS2 for Amdahl UTS 2.1.x 729#EXTRA_DEFS = -DUTS2 730#EXTRA_LIBS = -lsocket 731 732### UTS4 for Amdahl UTS 4.x 733#EXTRA_DEFS = -DUTS4 -Xa 734 735### USL for Unix Systems Laboratories (SYSV 4.2) 736#EXTRA_DEFS = -DUSL 737 738### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 739#CC= gcc -D_POSIX_SOURCE 740#CFLAGS= -O2 741#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 742 743### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 744### Also use the CONF_TERM_LIB below! 745#EXTRA_LIBS = -lgen 746 747### (D) QNX (by G.F. Desrochers) 748#CFLAGS = -g -O -mf -4 749 750### (F) QNX (by John Oleynick) 751# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 752# CONF_OPT_X = --without-x. 753# 2. make config 754# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 755# have -ldir (does config find it somewhere?) and -ltermcap has at 756# least one problem so I use termlib.o instead. The problem with 757# termcap is that it segfaults if you call it with the name of 758# a non-existent terminal type. 759# 4. edit auto/config.h and add #define USE_TMPNAM 760# 5. add termlib.o to OBJ 761# 6. make 762 763### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 764#EXTRA_LIBS = -lgen 765 766### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 767#EXTRA_LIBS = -lgen -lnsl 768### For SINIX-Y this is needed for the right prototype of gettimeofday() 769#EXTRA_DEFS = -D_XPG_IV 770 771### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 772# Use both "-F O3" lines for optimization or the "-g" line for debugging 773#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 774#CFLAGS = -F O3 -DSINIXN 775#LDFLAGS = -F O3 776#CFLAGS = -g -DSINIXN 777 778### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 779#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 780#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 781 782### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 783#GUI_INC_LOC = -I/usr/include 784#GUI_LIB_LOC = -L/usr/lib 785#EXTRA_LIBS = -lgen 786 787### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 788#GUI_INC_LOC = -I/usr/necccs/include 789#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 790#XROOT = /usr/necccs 791#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 792#EXTRA_LIBS = -lsocket -lgen 793 794### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 795# Not needed for Irix 5.3, Ives Aerts reported 796#EXTRA_LIBS = -lmalloc -lc_s 797# Irix 4.0, when regexp and regcmp cannot be found when linking: 798#EXTRA_LIBS = -lmalloc -lc_s -lPW 799 800### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 801# Note: This newer option style is used with the MipsPro compilers ONLY if 802# you are compiling an "n32" or "64" ABI binary (use either a -n32 803# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 804# then the CFLAGS option format will be the typical style (i.e. 805# -Olimit 3000). 806#CFLAGS = -OPT:Olimit=3000 -O 807 808### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 809# compiler features! Beware, the optimization is EXTREMELY thorough 810# and takes quite a long time. 811# Note: See the note above. Here, the -mips3 option automatically 812# enables either the "n32" or "64" ABI, depending on what machine you 813# are compiling on (n32 is explicitly enabled here, just to make sure). 814#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 815#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 816 817### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 818### Suggested by Jon Wright <[email protected]>. 819### Tested on R8000 IRIX6.1 Power Indigo2. 820### Check /etc/compiler.defaults for your compiler settings. 821# either (for 64 bit pointers) uncomment the following line 822#GUI_LIB_LOC = -L/usr/lib64 823# then 824# 1) make config 825# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 826# 3) make 827# 828# or (for 32bit pointers) uncomment the following line 829#EXTRA_DEFS = -n32 830#GUI_LIB_LOC = -L/usr/lib32 831# then 832# 1) make config 833# 2) edit auto/config.mk, add -n32 to LDFLAGS 834# 3) make 835# 836#Alternatively: use -o32 instead of -n32. 837### 838 839### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 840### which is found by configure, doesn't work correctly. Symptom is the 841### error message "Termcap entry too long". Uncomment the next line. 842### On AIX 4.2.1 (and other versions probably), libtermcap is reported 843### not to display properly. 844### after changing this, you need to do "make reconfig". 845#CONF_TERM_LIB = --with-tlib=curses 846 847### (E) If you want to use termlib library instead of the automatically found 848### one. After changing this, you need to do "make reconfig". 849#CONF_TERM_LIB = --with-tlib=termlib 850 851### (a) ESIX V4.2 (Reinhard Wobst) 852#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 853 854### (c) Tandem/NSK (Matthew Woehlke) 855#EXTRA_LIBS = -lfloss 856 857### If you want to use ncurses library instead of the automatically found one 858### after changing this, you need to do "make reconfig". 859#CONF_TERM_LIB = --with-tlib=ncurses 860 861### For GCC on MSDOS, the ".exe" suffix will be added. 862#EXEEXT = .exe 863#LNKEXT = .exe 864 865### (O) For LynxOS 2.5.0, tested on PC. 866#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 867### For LynxOS 3.0.1, tested on PPC 868#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 869### For LynxOS 3.1.0, tested on PC 870#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 871 872 873### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 874### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 875#CFLAGS = -O -Qtarget=m88110compat 876#EXTRA_LIBS = -lgen 877 878# The value of QUOTESED comes from auto/config.mk. 879# Uncomment the next line to use the default value. 880# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 881 882##################### end of system specific lines ################### }}} 883 884### Names of the programs and targets {{{1 885VIMTARGET = $(VIMNAME)$(EXEEXT) 886EXTARGET = $(EXNAME)$(LNKEXT) 887VIEWTARGET = $(VIEWNAME)$(LNKEXT) 888GVIMNAME = g$(VIMNAME) 889GVIMTARGET = $(GVIMNAME)$(LNKEXT) 890GVIEWNAME = g$(VIEWNAME) 891GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 892RVIMNAME = r$(VIMNAME) 893RVIMTARGET = $(RVIMNAME)$(LNKEXT) 894RVIEWNAME = r$(VIEWNAME) 895RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 896RGVIMNAME = r$(GVIMNAME) 897RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 898RGVIEWNAME = r$(GVIEWNAME) 899RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 900VIMDIFFNAME = $(VIMNAME)diff 901GVIMDIFFNAME = g$(VIMDIFFNAME) 902VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 903GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 904EVIMNAME = e$(VIMNAME) 905EVIMTARGET = $(EVIMNAME)$(LNKEXT) 906EVIEWNAME = e$(VIEWNAME) 907EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 908 909### Names of the tools that are also made {{{1 910TOOLS = xxd/xxd$(EXEEXT) 911 912### Installation directories. The defaults come from configure. {{{1 913# 914### prefix the top directory for the data (default "/usr/local") 915# 916# Uncomment the next line to install Vim in your home directory. 917#prefix = $(HOME) 918 919### exec_prefix is the top directory for the executable (default $(prefix)) 920# 921# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 922#exec_prefix = /usr/machine 923 924### BINDIR dir for the executable (default "$(exec_prefix)/bin") 925### MANDIR dir for the manual pages (default "$(prefix)/man") 926### DATADIR dir for the other files (default "$(prefix)/lib" or 927# "$(prefix)/share") 928# They may be different when using different architectures for the 929# executable and a common directory for the other files. 930# 931# Uncomment the next line to install Vim in "/usr/bin" 932#BINDIR = /usr/bin 933# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 934#MANDIR = /usr/share/man 935# Uncomment the next line to install Vim help files in "/usr/share/vim" 936#DATADIR = /usr/share 937 938### DESTDIR root of the installation tree. This is prepended to the other 939# directories. This directory must exist. 940#DESTDIR = ~/pkg/vim 941 942### Directory of the man pages 943MAN1DIR = /man1 944 945### Vim version (adjusted by a script) 946VIMMAJOR = 7 947VIMMINOR = 3 948 949### Location of Vim files (should not need to be changed, and {{{1 950### some things might not work when they are changed!) 951VIMDIR = /vim 952VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 953HELPSUBDIR = /doc 954COLSUBDIR = /colors 955SYNSUBDIR = /syntax 956INDSUBDIR = /indent 957AUTOSUBDIR = /autoload 958PLUGSUBDIR = /plugin 959FTPLUGSUBDIR = /ftplugin 960LANGSUBDIR = /lang 961COMPSUBDIR = /compiler 962KMAPSUBDIR = /keymap 963MACROSUBDIR = /macros 964TOOLSSUBDIR = /tools 965TUTORSUBDIR = /tutor 966SPELLSUBDIR = /spell 967PRINTSUBDIR = /print 968PODIR = po 969 970### VIMLOC common root of the Vim files (all versions) 971### VIMRTLOC common root of the runtime Vim files (this version) 972### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 973### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 974### HELPSUBLOC location for help files 975### COLSUBLOC location for colorscheme files 976### SYNSUBLOC location for syntax files 977### INDSUBLOC location for indent files 978### AUTOSUBLOC location for standard autoload files 979### PLUGSUBLOC location for standard plugin files 980### FTPLUGSUBLOC location for ftplugin files 981### LANGSUBLOC location for language files 982### COMPSUBLOC location for compiler files 983### KMAPSUBLOC location for keymap files 984### MACROSUBLOC location for macro files 985### TOOLSSUBLOC location for tools files 986### TUTORSUBLOC location for tutor files 987### SPELLSUBLOC location for spell files 988### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 989### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 990### You can override these if you want to install them somewhere else. 991### Edit feature.h for compile-time settings. 992VIMLOC = $(DATADIR)$(VIMDIR) 993VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 994VIMRCLOC = $(VIMLOC) 995HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 996COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 997SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 998INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 999AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1000PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1001FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1002LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1003COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1004KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1005MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1006TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1007TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1008SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1009PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1010SCRIPTLOC = $(VIMRTLOC) 1011 1012### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1013### the runtime directory is not below it. 1014#VIMRUNTIMEDIR = $(VIMRTLOC) 1015 1016### Name of the evim file target. 1017EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1018MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1019 1020### Name of the menu file target. 1021SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1022SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1023SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1024 1025### Name of the bugreport file target. 1026SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1027 1028### Name of the file type detection file target. 1029SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1030 1031### Name of the file type detection file target. 1032SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1033 1034### Name of the file type detection script file target. 1035SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1036 1037### Name of the ftplugin-on file target. 1038SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1039 1040### Name of the ftplugin-off file target. 1041SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1042 1043### Name of the indent-on file target. 1044SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1045 1046### Name of the indent-off file target. 1047SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1048 1049### Name of the option window script file target. 1050SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1051 1052# Program to install the program in the target directory. Could also be "mv". 1053INSTALL_PROG = cp 1054 1055# Program to install the data in the target directory. Cannot be "mv"! 1056INSTALL_DATA = cp 1057INSTALL_DATA_R = cp -r 1058 1059### Program to run on installed binary. Use the second one to disable strip. 1060#STRIP = strip 1061#STRIP = /bin/true 1062 1063### Permissions for binaries {{{1 1064BINMOD = 755 1065 1066### Permissions for man page 1067MANMOD = 644 1068 1069### Permissions for help files 1070HELPMOD = 644 1071 1072### Permissions for Perl and shell scripts 1073SCRIPTMOD = 755 1074 1075### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1076VIMSCRIPTMOD = 644 1077 1078### Permissions for all directories that are created 1079DIRMOD = 755 1080 1081### Permissions for all other files that are created 1082FILEMOD = 644 1083 1084# Where to copy the man and help files from 1085HELPSOURCE = ../runtime/doc 1086 1087# Where to copy the script files from (menu, bugreport) 1088SCRIPTSOURCE = ../runtime 1089 1090# Where to copy the colorscheme files from 1091COLSOURCE = ../runtime/colors 1092 1093# Where to copy the syntax files from 1094SYNSOURCE = ../runtime/syntax 1095 1096# Where to copy the indent files from 1097INDSOURCE = ../runtime/indent 1098 1099# Where to copy the standard plugin files from 1100AUTOSOURCE = ../runtime/autoload 1101 1102# Where to copy the standard plugin files from 1103PLUGSOURCE = ../runtime/plugin 1104 1105# Where to copy the ftplugin files from 1106FTPLUGSOURCE = ../runtime/ftplugin 1107 1108# Where to copy the macro files from 1109MACROSOURCE = ../runtime/macros 1110 1111# Where to copy the tools files from 1112TOOLSSOURCE = ../runtime/tools 1113 1114# Where to copy the tutor files from 1115TUTORSOURCE = ../runtime/tutor 1116 1117# Where to copy the spell files from 1118SPELLSOURCE = ../runtime/spell 1119 1120# Where to look for language specific files 1121LANGSOURCE = ../runtime/lang 1122 1123# Where to look for compiler files 1124COMPSOURCE = ../runtime/compiler 1125 1126# Where to look for keymap files 1127KMAPSOURCE = ../runtime/keymap 1128 1129# Where to look for print resource files 1130PRINTSOURCE = ../runtime/print 1131 1132# If you are using Linux, you might want to use this to make vim the 1133# default vi editor, it will create a link from vi to Vim when doing 1134# "make install". An existing file will be overwritten! 1135# When not using it, some make programs can't handle an undefined $(LINKIT). 1136#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1137LINKIT = @echo >/dev/null 1138 1139### 1140### GRAPHICAL USER INTERFACE (GUI). {{{1 1141### 'configure --enable-gui' can enable one of these for you if you did set 1142### a corresponding CONF_OPT_GUI above and have X11. 1143### Override configures choice by uncommenting all the following lines. 1144### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1145### for enabling the Athena or Motif GUI. 1146#GUI_SRC = $(NONE_SRC) 1147#GUI_OBJ = $(NONE_OBJ) 1148#GUI_DEFS = $(NONE_DEFS) 1149#GUI_IPATH = $(NONE_IPATH) 1150#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1151#GUI_LIBS1 = $(NONE_LIBS1) 1152#GUI_LIBS2 = $(NONE_LIBS2) 1153#GUI_INSTALL = $(NONE_INSTALL) 1154#GUI_TARGETS = $(NONE_TARGETS) 1155#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1156#GUI_TESTTARGET = $(NONE_TESTTARGET) 1157#GUI_BUNDLE = $(NONE_BUNDLE) 1158 1159# Without a GUI install the normal way. 1160NONE_INSTALL = install_normal 1161 1162### GTK GUI 1163GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1164 gui_beval.c 1165GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1166 objects/pty.o objects/gui_gtk_f.o \ 1167 objects/gui_beval.o 1168GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1169GTK_IPATH = $(GUI_INC_LOC) 1170GTK_LIBS_DIR = $(GUI_LIB_LOC) 1171GTK_LIBS1 = 1172GTK_LIBS2 = $(GTK_LIBNAME) 1173GTK_INSTALL = install_normal install_gui_extra 1174GTK_TARGETS = installglinks 1175GTK_MAN_TARGETS = yes 1176GTK_TESTTARGET = gui 1177GTK_BUNDLE = 1178 1179### Motif GUI 1180MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1181 gui_xmdlg.c gui_xmebw.c 1182MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1183 objects/pty.o objects/gui_beval.o \ 1184 objects/gui_xmdlg.o objects/gui_xmebw.o 1185MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1186MOTIF_IPATH = $(GUI_INC_LOC) 1187MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1188MOTIF_LIBS1 = 1189MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1190MOTIF_INSTALL = install_normal install_gui_extra 1191MOTIF_TARGETS = installglinks 1192MOTIF_MAN_TARGETS = yes 1193MOTIF_TESTTARGET = gui 1194MOTIF_BUNDLE = 1195 1196### Athena GUI 1197### Use Xaw3d to make the menus look a little bit nicer 1198#XAW_LIB = -lXaw3d 1199XAW_LIB = -lXaw 1200 1201### When using Xaw3d, uncomment/comment the following lines to also get the 1202### scrollbars from Xaw3d. 1203#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1204#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1205# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1206#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1207# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1208# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1209ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1210 gui_at_sb.c gui_at_fs.c 1211ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1212 objects/pty.o objects/gui_beval.o \ 1213 objects/gui_at_sb.o objects/gui_at_fs.o 1214ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1215 1216ATHENA_IPATH = $(GUI_INC_LOC) 1217ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1218ATHENA_LIBS1 = $(XAW_LIB) 1219ATHENA_LIBS2 = -lXt 1220ATHENA_INSTALL = install_normal install_gui_extra 1221ATHENA_TARGETS = installglinks 1222ATHENA_MAN_TARGETS = yes 1223ATHENA_TESTTARGET = gui 1224ATHENA_BUNDLE = 1225 1226### neXtaw GUI 1227NEXTAW_LIB = -lneXtaw 1228 1229NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1230NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1231 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1232NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1233 1234NEXTAW_IPATH = $(GUI_INC_LOC) 1235NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1236NEXTAW_LIBS1 = $(NEXTAW_LIB) 1237NEXTAW_LIBS2 = -lXt 1238NEXTAW_INSTALL = install_normal install_gui_extra 1239NEXTAW_TARGETS = installglinks 1240NEXTAW_MAN_TARGETS = yes 1241NEXTAW_TESTTARGET = gui 1242NEXTAW_BUNDLE = 1243 1244### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1245# errors: ld: Undefined symbol 1246# _get_wmShellWidgetClass 1247# _get_applicationShellWidgetClass 1248# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1249# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1250#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1251# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1252# too: 1253#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1254 1255# PHOTON GUI 1256PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1257PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1258PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1259PHOTONGUI_IPATH = 1260PHOTONGUI_LIBS_DIR = 1261PHOTONGUI_LIBS1 = -lph -lphexlib 1262PHOTONGUI_LIBS2 = 1263PHOTONGUI_INSTALL = install_normal install_gui_extra 1264PHOTONGUI_TARGETS = installglinks 1265PHOTONGUI_MAN_TARGETS = yes 1266PHOTONGUI_TESTTARGET = gui 1267PHOTONGUI_BUNDLE = 1268 1269# CARBON GUI 1270CARBONGUI_SRC = gui.c gui_mac.c 1271CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1272CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1273 -Wall -Wno-unknown-pragmas \ 1274 -mdynamic-no-pic -pipe 1275CARBONGUI_IPATH = -I. -Iproto 1276CARBONGUI_LIBS_DIR = 1277CARBONGUI_LIBS1 = -framework Carbon 1278CARBONGUI_LIBS2 = 1279CARBONGUI_INSTALL = install_macosx 1280CARBONGUI_TARGETS = 1281CARBONGUI_MAN_TARGETS = 1282CARBONGUI_TESTTARGET = gui 1283CARBONGUI_BUNDLE = gui_bundle 1284APPDIR = $(VIMNAME).app 1285CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1286 1287# All GUI files 1288ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1289ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1290 1291# }}} 1292 1293### Command to create dependencies based on #include "..." 1294### prototype headers are ignored due to -DPROTO, system 1295### headers #include <...> are ignored if we use the -MM option, as 1296### e.g. provided by gcc-cpp. 1297### Include FEAT_GUI to get dependency on gui.h 1298### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1299CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1300 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1301 1302# flags for cproto 1303# This is for cproto 3 patchlevel 8 or below 1304# __inline, __attribute__ and __extension__ are not recognized by cproto 1305# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1306#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1307# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1308# -D__extension__= -D__restrict="" \ 1309# -D__gnuc_va_list=char -D__builtin_va_list=char 1310 1311# 1312# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1313# __inline and __attribute__ are now recognized by cproto 1314# -D"foo()=" is not supported by all compilers so do not use it 1315NO_ATTR= 1316# 1317# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1318# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1319# 1320# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1321PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1322 1323 1324################################################ 1325## no changes required below this line ## 1326################################################ 1327 1328SHELL = /bin/sh 1329 1330.SUFFIXES: 1331.SUFFIXES: .c .o .pro 1332 1333PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1334POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(TCL_CFLAGS) $(EXTRA_DEFS) 1335 1336ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(LEAK_CFLAGS) $(POST_DEFS) 1337 1338# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1339# with "-E". 1340OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1341 1342LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1343 1344LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1345 1346DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1347 1348# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1349# needed by racket. 1350ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1351ALL_LIBS = \ 1352 $(GUI_LIBS1) \ 1353 $(GUI_X_LIBS) \ 1354 $(GUI_LIBS2) \ 1355 $(X_PRE_LIBS) \ 1356 $(X_LIBS) \ 1357 $(X_EXTRA_LIBS) \ 1358 $(MZSCHEME_LIBS) \ 1359 $(LIBS) \ 1360 $(EXTRA_LIBS) \ 1361 $(LUA_LIBS) \ 1362 $(PERL_LIBS) \ 1363 $(PYTHON_LIBS) \ 1364 $(PYTHON3_LIBS) \ 1365 $(TCL_LIBS) \ 1366 $(RUBY_LIBS) \ 1367 $(PROFILE_LIBS) \ 1368 $(LEAK_LIBS) 1369 1370# abbreviations 1371DEST_BIN = $(DESTDIR)$(BINDIR) 1372DEST_VIM = $(DESTDIR)$(VIMLOC) 1373DEST_RT = $(DESTDIR)$(VIMRTLOC) 1374DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1375DEST_COL = $(DESTDIR)$(COLSUBLOC) 1376DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1377DEST_IND = $(DESTDIR)$(INDSUBLOC) 1378DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1379DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1380DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1381DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1382DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1383DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1384DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1385DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1386DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1387DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1388DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1389DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1390DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1391 1392# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1393# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1394# directory first. 1395# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1396DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1397DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1398DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1399DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1400DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1401DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1402DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1403DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1404DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1405DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1406DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1407DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1408 1409# BASIC_SRC: files that are always used 1410# GUI_SRC: extra GUI files for current configuration 1411# ALL_GUI_SRC: all GUI files for Unix 1412# 1413# SRC: files used for current configuration 1414# TAGS_SRC: source files used for make tags 1415# TAGS_INCL: include files used for make tags 1416# ALL_SRC: source files used for make depend and make lint 1417 1418TAGS_INCL = *.h 1419 1420BASIC_SRC = \ 1421 blowfish.c \ 1422 buffer.c \ 1423 charset.c \ 1424 diff.c \ 1425 digraph.c \ 1426 edit.c \ 1427 eval.c \ 1428 ex_cmds.c \ 1429 ex_cmds2.c \ 1430 ex_docmd.c \ 1431 ex_eval.c \ 1432 ex_getln.c \ 1433 fileio.c \ 1434 fold.c \ 1435 getchar.c \ 1436 hardcopy.c \ 1437 hashtab.c \ 1438 if_cscope.c \ 1439 if_xcmdsrv.c \ 1440 main.c \ 1441 mark.c \ 1442 memfile.c \ 1443 memline.c \ 1444 menu.c \ 1445 message.c \ 1446 misc1.c \ 1447 misc2.c \ 1448 move.c \ 1449 mbyte.c \ 1450 normal.c \ 1451 ops.c \ 1452 option.c \ 1453 os_unix.c \ 1454 auto/pathdef.c \ 1455 popupmnu.c \ 1456 quickfix.c \ 1457 regexp.c \ 1458 screen.c \ 1459 search.c \ 1460 sha256.c \ 1461 spell.c \ 1462 syntax.c \ 1463 tag.c \ 1464 term.c \ 1465 ui.c \ 1466 undo.c \ 1467 version.c \ 1468 window.c \ 1469 $(OS_EXTRA_SRC) 1470 1471SRC = $(BASIC_SRC) \ 1472 $(GUI_SRC) \ 1473 $(HANGULIN_SRC) \ 1474 $(LUA_SRC) \ 1475 $(MZSCHEME_SRC) \ 1476 $(PERL_SRC) \ 1477 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1478 $(TCL_SRC) \ 1479 $(RUBY_SRC) \ 1480 $(SNIFF_SRC) \ 1481 $(WORKSHOP_SRC) \ 1482 $(WSDEBUG_SRC) 1483 1484TAGS_SRC = *.c *.cpp if_perl.xs 1485 1486EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1487 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1488 gui_beval.c workshop.c wsdebug.c integration.c netbeans.c 1489 1490# Unittest files 1491MEMFILE_TEST_SRC = memfile_test.c 1492MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1493 1494UNITTEST_SRC = $(MEMFILE_TEST_SRC) 1495UNITTEST_TARGETS = $(MEMFILE_TEST_TARGET) 1496 1497# All sources, also the ones that are not configured 1498ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) $(EXTRA_SRC) 1499 1500# Which files to check with lint. Select one of these three lines. ALL_SRC 1501# checks more, but may not work well for checking a GUI that wasn't configured. 1502# The perl sources also don't work well with lint. 1503LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1504 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1505#LINT_SRC = $(SRC) 1506#LINT_SRC = $(ALL_SRC) 1507#LINT_SRC = $(BASIC_SRC) 1508 1509OBJ_COMMON = \ 1510 objects/buffer.o \ 1511 objects/blowfish.o \ 1512 objects/charset.o \ 1513 objects/diff.o \ 1514 objects/digraph.o \ 1515 objects/edit.o \ 1516 objects/eval.o \ 1517 objects/ex_cmds.o \ 1518 objects/ex_cmds2.o \ 1519 objects/ex_docmd.o \ 1520 objects/ex_eval.o \ 1521 objects/ex_getln.o \ 1522 objects/fileio.o \ 1523 objects/fold.o \ 1524 objects/getchar.o \ 1525 objects/hardcopy.o \ 1526 objects/hashtab.o \ 1527 $(HANGULIN_OBJ) \ 1528 objects/if_cscope.o \ 1529 objects/if_xcmdsrv.o \ 1530 objects/mark.o \ 1531 objects/memline.o \ 1532 objects/menu.o \ 1533 objects/message.o \ 1534 objects/misc1.o \ 1535 objects/misc2.o \ 1536 objects/move.o \ 1537 objects/mbyte.o \ 1538 objects/normal.o \ 1539 objects/ops.o \ 1540 objects/option.o \ 1541 objects/os_unix.o \ 1542 objects/pathdef.o \ 1543 objects/popupmnu.o \ 1544 objects/quickfix.o \ 1545 objects/regexp.o \ 1546 objects/screen.o \ 1547 objects/search.o \ 1548 objects/sha256.o \ 1549 objects/spell.o \ 1550 objects/syntax.o \ 1551 $(SNIFF_OBJ) \ 1552 objects/tag.o \ 1553 objects/term.o \ 1554 objects/ui.o \ 1555 objects/undo.o \ 1556 objects/version.o \ 1557 objects/window.o \ 1558 $(GUI_OBJ) \ 1559 $(LUA_OBJ) \ 1560 $(MZSCHEME_OBJ) \ 1561 $(PERL_OBJ) \ 1562 $(PYTHON_OBJ) \ 1563 $(PYTHON3_OBJ) \ 1564 $(TCL_OBJ) \ 1565 $(RUBY_OBJ) \ 1566 $(OS_EXTRA_OBJ) \ 1567 $(WORKSHOP_OBJ) \ 1568 $(NETBEANS_OBJ) \ 1569 $(WSDEBUG_OBJ) 1570 1571OBJ = $(OBJ_COMMON) \ 1572 objects/main.o \ 1573 objects/memfile.o 1574 1575MEMFILE_TEST_OBJ = $(OBJ_COMMON) \ 1576 objects/memfile_test.o 1577 1578PRO_AUTO = \ 1579 blowfish.pro \ 1580 buffer.pro \ 1581 charset.pro \ 1582 diff.pro \ 1583 digraph.pro \ 1584 edit.pro \ 1585 eval.pro \ 1586 ex_cmds.pro \ 1587 ex_cmds2.pro \ 1588 ex_docmd.pro \ 1589 ex_eval.pro \ 1590 ex_getln.pro \ 1591 fileio.pro \ 1592 fold.pro \ 1593 getchar.pro \ 1594 hardcopy.pro \ 1595 hashtab.pro \ 1596 hangulin.pro \ 1597 if_cscope.pro \ 1598 if_xcmdsrv.pro \ 1599 if_python.pro \ 1600 if_python3.pro \ 1601 if_ruby.pro \ 1602 main.pro \ 1603 mark.pro \ 1604 memfile.pro \ 1605 memline.pro \ 1606 menu.pro \ 1607 message.pro \ 1608 misc1.pro \ 1609 misc2.pro \ 1610 move.pro \ 1611 mbyte.pro \ 1612 normal.pro \ 1613 ops.pro \ 1614 option.pro \ 1615 os_unix.pro \ 1616 popupmnu.pro \ 1617 quickfix.pro \ 1618 regexp.pro \ 1619 screen.pro \ 1620 search.pro \ 1621 sha256.pro \ 1622 spell.pro \ 1623 syntax.pro \ 1624 tag.pro \ 1625 term.pro \ 1626 termlib.pro \ 1627 ui.pro \ 1628 undo.pro \ 1629 version.pro \ 1630 window.pro \ 1631 gui_beval.pro \ 1632 workshop.pro \ 1633 netbeans.pro \ 1634 $(ALL_GUI_PRO) \ 1635 $(TCL_PRO) 1636 1637# Resources used for the Mac are in one directory. 1638RSRC_DIR = os_mac_rsrc 1639 1640PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1641 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1642 1643# Default target is making the executable and tools 1644all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1645 1646tools: $(TOOLS) 1647 1648# Run configure with all the setting from above. 1649# 1650# Note: auto/config.h doesn't depend on configure, because running configure 1651# doesn't always update auto/config.h. The timestamp isn't changed if the 1652# file contents didn't change (to avoid recompiling everything). Including a 1653# dependency on auto/config.h would cause running configure each time when 1654# auto/config.h isn't updated. The dependency on auto/config.mk should make 1655# sure configure is run when it's needed. 1656# 1657config auto/config.mk: auto/configure config.mk.in config.h.in 1658 if test -f auto/config.cache && \ 1659 grep '^ac_cv_env_CFLAGS_value=' auto/config.cache > /dev/null && \ 1660 ! grep -x -F 'ac_cv_env_CFLAGS_value=$(CFLAGS)' auto/config.cache > /dev/null; then \ 1661 rm auto/config.cache; \ 1662 fi 1663 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1664 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1665 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1666 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1667 $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1668 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1669 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1670 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1671 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1672 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1673 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1674 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1675 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1676 $(CONF_OPT_SYSMOUSE) 1677 1678# Use "make reconfig" to rerun configure without cached values. 1679# When config.h changes, most things will be recompiled automatically. 1680# Invoke $(MAKE) to run config with the empty auto/config.mk. 1681# Invoke $(MAKE) to build all with the filled auto/config.mk. 1682reconfig: scratch clean 1683 $(MAKE) -f Makefile config 1684 $(MAKE) -f Makefile all 1685 1686# Run autoconf to produce auto/configure. 1687# Note: 1688# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1689# producing auto/configure. 1690# - autoconf is not run automatically, because a patch usually changes both 1691# configure.in and auto/configure but can't update the timestamps. People 1692# who do not have (the correct version of) autoconf would run into trouble. 1693# 1694# Two tricks are required to make autoconf put its output in the "auto" dir: 1695# - Temporarily move the ./configure script to ./configure.save. Don't 1696# overwrite it, it's probably the result of an aborted autoconf. 1697# - Use sed to change ./config.log to auto/config.log in the configure script. 1698# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1699# care of: 1700# - configure.lineno: has the line numbers replaced with $LINENO. That 1701# improves patches a LOT, thus use it instead (until someone says it doesn't 1702# work on some system). 1703# - autom4te.cache directory is created and not cleaned up. Delete it. 1704# - Uses ">config.log" instead of "./config.log". 1705autoconf: 1706 if test ! -f configure.save; then mv configure configure.save; fi 1707 autoconf 1708 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1709 chmod 755 auto/configure 1710 mv -f configure.save configure 1711 -rm -rf autom4te.cache 1712 -rm -f auto/config.status auto/config.cache 1713 1714# Re-execute this Makefile to include the new auto/config.mk produced by 1715# configure Only used when typing "make" with a fresh auto/config.mk. 1716myself: 1717 $(MAKE) -f Makefile all 1718 1719 1720# The normal command to compile a .c file to its .o file. 1721CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1722 1723 1724# Link the target for normal use or debugging. 1725# A shell script is used to try linking without unnecessary libraries. 1726$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1727 $(CCC) version.c -o objects/version.o 1728 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1729 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1730 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1731 sh $(srcdir)/link.sh 1732 1733xxd/xxd$(EXEEXT): xxd/xxd.c 1734 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1735 $(MAKE) -f Makefile 1736 1737# Build the language specific files if they were unpacked. 1738# Generate the converted .mo files separately, it's no problem if this fails. 1739languages: 1740 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1741 cd $(PODIR); \ 1742 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1743 fi 1744 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1745 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1746 fi 1747 1748# Update the *.po files for changes in the sources. Only run manually. 1749update-po: 1750 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1751 1752# Generate function prototypes. This is not needed to compile vim, but if 1753# you want to use it, cproto is out there on the net somewhere -- Webb 1754# 1755# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1756# few include files that can not be found, that's OK. 1757 1758proto: $(PRO_AUTO) $(PRO_MANUAL) 1759 1760# Filter out arguments that cproto doesn't support. 1761# Don't pass "-pthread" to cproto, it sees it as a list of individual flags. 1762# Don't pass "-fstack-protector" to cproto, for the same reason. 1763# Don't pass "-g" to cproto. 1764# The -E"gcc -E" argument must be separate to avoid problems with shell 1765# quoting. 1766CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1767 `echo '$(LINT_CFLAGS)' | sed -e 's/-pthread//g' -e 's/-fstack-protector//g' -e 's/\ -g\ / /g'` 1768 1769### Would be nice if this would work for "normal" make. 1770### Currently it only works for (Free)BSD make. 1771#$(PRO_AUTO): $$(*F).c 1772# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1773 1774# Always define FEAT_GUI. This may generate a few warnings if it's also 1775# defined in auto/config.h, you can ignore that. 1776.c.pro: 1777 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1778 echo "/* vim: set ft=c : */" >> proto/$@ 1779 1780os_amiga.pro: os_amiga.c 1781 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1782 echo "/* vim: set ft=c : */" >> proto/$@ 1783 1784os_msdos.pro: os_msdos.c 1785 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1786 echo "/* vim: set ft=c : */" >> proto/$@ 1787 1788os_win16.pro: os_win16.c 1789 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1790 echo "/* vim: set ft=c : */" >> proto/$@ 1791 1792os_win32.pro: os_win32.c 1793 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1794 echo "/* vim: set ft=c : */" >> proto/$@ 1795 1796os_mswin.pro: os_mswin.c 1797 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1798 echo "/* vim: set ft=c : */" >> proto/$@ 1799 1800winclip.pro: winclip.c 1801 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1802 echo "/* vim: set ft=c : */" >> proto/$@ 1803 1804os_beos.pro: os_beos.c 1805 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1806 echo "/* vim: set ft=c : */" >> proto/$@ 1807 1808os_vms.pro: os_vms.c 1809# must use os_vms_conf.h for auto/config.h 1810 mv auto/config.h auto/config.h.save 1811 cp os_vms_conf.h auto/config.h 1812 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1813 echo "/* vim: set ft=c : */" >> proto/$@ 1814 rm auto/config.h 1815 mv auto/config.h.save auto/config.h 1816 1817# if_perl.pro is special: Use the generated if_perl.c for input and remove 1818# prototypes for local functions. 1819if_perl.pro: auto/if_perl.c 1820 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1821 1822 1823notags: 1824 -rm -f tags 1825 1826# Note: tags is made for the currently configured version, can't include both 1827# Motif and Athena GUI 1828# You can ignore error messages for missing files. 1829tags TAGS: notags 1830 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1831 1832# Make a highlight file for types. Requires Exuberant ctags and awk 1833types: types.vim 1834types.vim: $(TAGS_SRC) $(TAGS_INCL) 1835 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1836 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1837 {printf("%s ", $$1)}END{print ""}' > $@ 1838 1839# Execute the test scripts. Run these after compiling Vim, before installing. 1840# This doesn't depend on $(VIMTARGET), because that won't work when configure 1841# wasn't run yet. Restart make to build it instead. 1842# 1843# This will produce a lot of garbage on your screen, including a few error 1844# messages. Don't worry about that. 1845# If there is a real error, there will be a difference between "testXX.out" and 1846# a "testXX.ok" file. 1847# If everything is alright, the final message will be "ALL DONE". If not you 1848# get "TEST FAILURE". 1849# 1850test check: 1851 $(MAKE) -f Makefile $(VIMTARGET) 1852 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1853 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1854 fi 1855 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1856 ln -s $(VIMTARGET) vim; \ 1857 fi 1858 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1859 $(MAKE) -f Makefile unittest 1860 1861unittesttargets: 1862 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 1863 1864unittest unittests: $(UNITTEST_TARGETS) 1865 @for t in $(UNITTEST_TARGETS); do \ 1866 ./$$t || exit 1; echo $$t passed; \ 1867 done 1868 1869# Run individual test, assuming that Vim was already compiled. 1870test1 test2 test3 test4 test5 test6 test7 test8 test9 \ 1871 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 \ 1872 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29 \ 1873 test30 test31 test32 test33 test34 test35 test36 test37 test38 test39 \ 1874 test40 test41 test42 test43 test44 test45 test46 test47 test48 test49 \ 1875 test50 test51 test52 test53 test54 test55 test56 test57 test58 test59 \ 1876 test60 test61 test62 test63 test64 test65 test66 test67 test68 test69 \ 1877 test70 test71 test72 test73 test74 test75 test76 test77 test78 test79 \ 1878 test80 test81 test82 test83 test84 test85 test86 test87 test88 test89 \ 1879 test90 test91 test92 test93 test94 test95 test96 test97 test98 test99: 1880 cd testdir; rm $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTARGET) 1881 1882testclean: 1883 cd testdir; $(MAKE) -f Makefile clean 1884 if test -d $(PODIR); then \ 1885 cd $(PODIR); $(MAKE) checkclean; \ 1886 fi 1887 1888# Unittests 1889# It's build just like Vim to satisfy all dependencies. 1890$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 1891 $(CCC) version.c -o objects/version.o 1892 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1893 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 1894 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1895 sh $(srcdir)/link.sh 1896 1897# install targets 1898 1899install: $(GUI_INSTALL) 1900 1901install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1902 1903install_gui_extra: installgtutorbin 1904 1905installvim: installvimbin installtutorbin \ 1906 installruntime installlinks installmanlinks 1907 1908# 1909# Avoid overwriting an existing executable, somebody might be running it and 1910# overwriting it could cause it to crash. Deleting it is OK, it won't be 1911# really deleted until all running processes for it have exited. It is 1912# renamed first, in case the deleting doesn't work. 1913# 1914# If you want to keep an older version, rename it before running "make 1915# install". 1916# 1917installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1918 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1919 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1920 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1921 fi 1922 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1923 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1924 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1925# may create a link to the new executable from /usr/bin/vi 1926 -$(LINKIT) 1927 1928# Long list of arguments for the shell script that installs the manual pages 1929# for one language. 1930INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1931 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1932 1933# Install most of the runtime files 1934installruntime: installrtbase installmacros installtutor installspell 1935 1936# install the help files; first adjust the contents for the final location 1937installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1938 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1939 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1940 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1941 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1942 @echo generating help tags 1943# Generate the help tags with ":helptags" to handle all languages. 1944 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1945 cd $(HELPSOURCE); \ 1946 files=`ls *.txt tags`; \ 1947 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1948 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1949 cd $(DEST_HELP); \ 1950 chmod $(HELPMOD) $$files 1951 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1952 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1953# install the menu files 1954 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1955 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1956 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1957 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1958 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1959 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1960# install the evim file 1961 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1962 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1963 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1964 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1965# install the bugreport file 1966 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1967 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1968# install the example vimrc files 1969 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1970 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1971 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1972 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1973# install the file type detection files 1974 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1975 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1976 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1977 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1978 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1979 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1980 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1981 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1982 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1983 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1984 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1985 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1986 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1987 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1988 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1989 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1990# install the print resource files 1991 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1992 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1993# install the colorscheme files 1994 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1995 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1996# install the syntax files 1997 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1998 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1999# install the indent files 2000 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2001 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2002# install the standard autoload files 2003 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2004 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2005 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2006 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2007# install the standard plugin files 2008 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2009 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2010# install the ftplugin files 2011 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2012 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2013# install the compiler files 2014 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2015 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2016 2017installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2018 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2019 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2020 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2021 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2022# When using CVS some CVS directories might have been copied. 2023# Also delete AAPDIR and *.info files. 2024 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2025 if test -n "$$cvs"; then \ 2026 rm -rf $$cvs; \ 2027 fi 2028 2029# install the tutor files 2030installtutorbin: $(DEST_VIM) 2031 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2032 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2033 2034installgtutorbin: $(DEST_VIM) 2035 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2036 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2037 2038installtutor: $(DEST_RT) $(DEST_TUTOR) 2039 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2040 -rm -f $(DEST_TUTOR)/*.info 2041 chmod $(HELPMOD) $(DEST_TUTOR)/* 2042 2043# Install the spell files, if they exist. This assumes at least the English 2044# spell file is there. 2045installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2046 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2047 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2048 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2049 fi 2050 2051# install helper program xxd 2052installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2053 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2054 $(INSTALL_TOOL_LANGS) 2055 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2056 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2057 rm -f $(DEST_BIN)/xxd.rm; \ 2058 fi 2059 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2060 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2061 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2062 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2063 2064# install the runtime tools 2065 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2066# When using CVS some CVS directories might have been copied. 2067 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2068 if test -n "$$cvs"; then \ 2069 rm -rf $$cvs; \ 2070 fi 2071 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2072# replace the path in some tools 2073 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2074 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2075 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2076 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2077 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2078 2079# install the language specific files for tools, if they were unpacked 2080install-tool-languages: 2081 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2082 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2083 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2084 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2085 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2086 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2087 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2088 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2089 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2090 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2091 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2092 2093# install the language specific files, if they were unpacked 2094install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2095 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2096 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2097 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2098 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2099 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2100 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2101 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2102 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2103 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2104 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2105 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2106 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2107 $(DEST_MAN_FR) $(INSTALLMLARGS) 2108 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2109 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2110 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2111 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2112 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2113 $(DEST_MAN_IT) $(INSTALLMLARGS) 2114 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2115 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2116 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2117 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2118 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2119 $(DEST_MAN_PL) $(INSTALLMLARGS) 2120 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2121 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2122 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2123 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2124 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2125 $(DEST_MAN_RU) $(INSTALLMLARGS) 2126 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2127 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2128 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2129 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2130 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2131 fi 2132 if test -d $(LANGSOURCE); then \ 2133 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2134 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2135 fi 2136 if test -d $(KMAPSOURCE); then \ 2137 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2138 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2139 fi 2140 2141# install the icons for KDE, if the directory exists and the icon doesn't. 2142ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2143ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2144ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2145KDEPATH = $(HOME)/.kde/share/icons 2146install-icons: 2147 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2148 -a ! -f $(ICON48PATH)/gvim.png; then \ 2149 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2150 fi 2151 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2152 -a ! -f $(ICON32PATH)/gvim.png; then \ 2153 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2154 fi 2155 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2156 -a ! -f $(ICON16PATH)/gvim.png; then \ 2157 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2158 fi 2159 2160 2161$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2162 @echo Runtime files not found. 2163 @echo You need to unpack the runtime archive before running "make install". 2164 test -f error 2165 2166$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2167 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2168 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2169 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2170 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2171 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2172 -$(SHELL) ./mkinstalldirs $@ 2173 -chmod $(DIRMOD) $@ 2174 2175# create links from various names to vim. This is only done when the links 2176# (or executables with the same name) don't exist yet. 2177installlinks: $(GUI_TARGETS) \ 2178 $(DEST_BIN)/$(EXTARGET) \ 2179 $(DEST_BIN)/$(VIEWTARGET) \ 2180 $(DEST_BIN)/$(RVIMTARGET) \ 2181 $(DEST_BIN)/$(RVIEWTARGET) \ 2182 $(INSTALLVIMDIFF) 2183 2184installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2185 $(DEST_BIN)/$(GVIEWTARGET) \ 2186 $(DEST_BIN)/$(RGVIMTARGET) \ 2187 $(DEST_BIN)/$(RGVIEWTARGET) \ 2188 $(DEST_BIN)/$(EVIMTARGET) \ 2189 $(DEST_BIN)/$(EVIEWTARGET) \ 2190 $(INSTALLGVIMDIFF) 2191 2192installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2193installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2194 2195$(DEST_BIN)/$(EXTARGET): 2196 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2197 2198$(DEST_BIN)/$(VIEWTARGET): 2199 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2200 2201$(DEST_BIN)/$(GVIMTARGET): 2202 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2203 2204$(DEST_BIN)/$(GVIEWTARGET): 2205 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2206 2207$(DEST_BIN)/$(RVIMTARGET): 2208 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2209 2210$(DEST_BIN)/$(RVIEWTARGET): 2211 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2212 2213$(DEST_BIN)/$(RGVIMTARGET): 2214 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2215 2216$(DEST_BIN)/$(RGVIEWTARGET): 2217 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2218 2219$(DEST_BIN)/$(VIMDIFFTARGET): 2220 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2221 2222$(DEST_BIN)/$(GVIMDIFFTARGET): 2223 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2224 2225$(DEST_BIN)/$(EVIMTARGET): 2226 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2227 2228$(DEST_BIN)/$(EVIEWTARGET): 2229 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2230 2231# Create links for the manual pages with various names to vim. This is only 2232# done when the links (or manpages with the same name) don't exist yet. 2233 2234INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2235 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2236 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2237 $(GVIMDIFFNAME) $(EVIEWNAME) 2238 2239installmanlinks: 2240 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2241 $(DEST_MAN) $(INSTALLMLARGS) 2242 2243uninstall: uninstall_runtime 2244 -rm -f $(DEST_BIN)/$(VIMTARGET) 2245 -rm -f $(DEST_BIN)/vimtutor 2246 -rm -f $(DEST_BIN)/gvimtutor 2247 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2248 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2249 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2250 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2251 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2252 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2253 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2254 2255# Note: the "rmdir" will fail if any files were added after "make install" 2256uninstall_runtime: 2257 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2258 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2259 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2260 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2261 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2262 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2263 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2264 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2265 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2266 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2267 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2268 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2269 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2270 $(DEST_MAN) $(INSTALLMLARGS) 2271 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2272 $(DEST_MAN_FR) $(INSTALLMLARGS) 2273 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2274 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2275 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2276 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2277 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2278 $(DEST_MAN_IT) $(INSTALLMLARGS) 2279 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2280 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2281 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2282 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2283 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2284 $(DEST_MAN_PL) $(INSTALLMLARGS) 2285 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2286 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2287 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2288 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2289 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2290 $(DEST_MAN_RU) $(INSTALLMLARGS) 2291 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2292 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2293 -rm -f $(DEST_MAN)/xxd.1 2294 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2295 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2296 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2297 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2298 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2299 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2300 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2301 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2302 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2303 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2304 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2305 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2306 -rm -f $(SYS_OPTWIN_FILE) 2307 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2308 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2309 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2310 -rm -rf $(DEST_MACRO) 2311 -rm -rf $(DEST_TUTOR) 2312 -rm -rf $(DEST_SPELL) 2313 -rm -rf $(DEST_TOOLS) 2314 -rm -rf $(DEST_LANG) 2315 -rm -rf $(DEST_KMAP) 2316 -rm -rf $(DEST_COMP) 2317 -rm -f $(DEST_PRINT)/*.ps 2318 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2319 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2320 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2321 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2322 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2323# This will fail when other Vim versions are installed, no worries. 2324 -rmdir $(DEST_VIM) 2325 2326# Clean up all the files that have been produced, except configure's. 2327# We support common typing mistakes for Juergen! :-) 2328clean celan: testclean 2329 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2330 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2331 -rm -f conftest* *~ auto/link.sed 2332 -rm -f $(UNITTEST_TARGETS) 2333 -rm -f runtime pixmaps 2334 -rm -rf $(APPDIR) 2335 -rm -rf mzscheme_base.c 2336 if test -d $(PODIR); then \ 2337 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2338 fi 2339 2340# Make a shadow directory for compilation on another system or with different 2341# features. 2342SHADOWDIR = shadow 2343 2344shadow: runtime pixmaps 2345 mkdir $(SHADOWDIR) 2346 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs . 2347 mkdir $(SHADOWDIR)/auto 2348 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2349 cd $(SHADOWDIR); rm -f auto/link.sed 2350 cp Makefile configure $(SHADOWDIR) 2351 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2352 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2353 cp config.mk.dist $(SHADOWDIR) 2354 mkdir $(SHADOWDIR)/xxd 2355 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2356 if test -d $(RSRC_DIR); then \ 2357 cd $(SHADOWDIR); \ 2358 ln -s ../infplist.xml .; \ 2359 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2360 fi 2361 mkdir $(SHADOWDIR)/testdir 2362 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2363 ../../testdir/vimrc.unix \ 2364 ../../testdir/*.in \ 2365 ../../testdir/*.vim \ 2366 ../../testdir/test83-tags? \ 2367 ../../testdir/*.ok . 2368 2369# Link needed for doing "make install" in a shadow directory. 2370runtime: 2371 -ln -s ../runtime . 2372 2373# Link needed for doing "make" using GTK in a shadow directory. 2374pixmaps: 2375 -ln -s ../pixmaps . 2376 2377# Update the synmenu.vim file with the latest Syntax menu. 2378# This is only needed when runtime/makemenu.vim was changed. 2379menu: ./vim ../runtime/makemenu.vim 2380 ./vim -u ../runtime/makemenu.vim 2381 2382# Start configure from scratch 2383scrub scratch: 2384 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2385 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2386 touch auto/config.h 2387 cp config.mk.dist auto/config.mk 2388 2389distclean: clean scratch 2390 -rm -f tags 2391 2392dist: distclean 2393 @echo 2394 @echo Making the distribution has to be done in the top directory 2395 2396mdepend: 2397 -@rm -f Makefile~ 2398 cp Makefile Makefile~ 2399 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2400 @for i in $(ALL_SRC) ; do \ 2401 echo "$$i" ; \ 2402 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2403 $(CPP) $$i |\ 2404 grep '^# .*"\./.*\.h"' |\ 2405 sort -t'"' -u +1 -2 |\ 2406 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2407 ` >> tmp_make ; \ 2408 done 2409 mv tmp_make Makefile 2410 2411depend: 2412 -@rm -f Makefile~ 2413 cp Makefile Makefile~ 2414 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2415 -for i in $(ALL_SRC); do echo $$i; \ 2416 $(CPP_DEPEND) $$i | \ 2417 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2418 mv tmp_make Makefile 2419 2420# Run lint. Clean up the *.ln files that are sometimes left behind. 2421lint: 2422 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2423 -rm -f *.ln 2424 2425# Check dosinst.c with lint. 2426lintinstall: 2427 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2428 -rm -f dosinst.ln 2429 2430########################################################################### 2431 2432.c.o: 2433 $(CCC) $< 2434 2435auto/if_perl.c: if_perl.xs 2436 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2437 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2438 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2439 2440auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2441 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2442 2443auto/pathdef.c: Makefile auto/config.mk 2444 -@echo creating $@ 2445 -@echo '/* pathdef.c */' > $@ 2446 -@echo '/* This file is automatically created by Makefile' >> $@ 2447 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2448 -@echo '#include "vim.h"' >> $@ 2449 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2450 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2451 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2452 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2453 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2454 -@if test -n "$(COMPILEDBY)"; then \ 2455 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2456 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2457 -@echo '";' >> $@ 2458 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2459 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2460 -@echo '";' >> $@ 2461 -@sh $(srcdir)/pathdef.sh 2462 2463# All the object files are put in the "objects" directory. Since not all make 2464# commands understand putting object files in another directory, it must be 2465# specified for each file separately. 2466 2467objects: 2468 mkdir objects 2469 2470objects/blowfish.o: blowfish.c 2471 $(CCC) -o $@ blowfish.c 2472 2473objects/buffer.o: buffer.c 2474 $(CCC) -o $@ buffer.c 2475 2476objects/charset.o: charset.c 2477 $(CCC) -o $@ charset.c 2478 2479objects/diff.o: diff.c 2480 $(CCC) -o $@ diff.c 2481 2482objects/digraph.o: digraph.c 2483 $(CCC) -o $@ digraph.c 2484 2485objects/edit.o: edit.c 2486 $(CCC) -o $@ edit.c 2487 2488objects/eval.o: eval.c 2489 $(CCC) -o $@ eval.c 2490 2491objects/ex_cmds.o: ex_cmds.c 2492 $(CCC) -o $@ ex_cmds.c 2493 2494objects/ex_cmds2.o: ex_cmds2.c 2495 $(CCC) -o $@ ex_cmds2.c 2496 2497objects/ex_docmd.o: ex_docmd.c 2498 $(CCC) -o $@ ex_docmd.c 2499 2500objects/ex_eval.o: ex_eval.c 2501 $(CCC) -o $@ ex_eval.c 2502 2503objects/ex_getln.o: ex_getln.c 2504 $(CCC) -o $@ ex_getln.c 2505 2506objects/fileio.o: fileio.c 2507 $(CCC) -o $@ fileio.c 2508 2509objects/fold.o: fold.c 2510 $(CCC) -o $@ fold.c 2511 2512objects/getchar.o: getchar.c 2513 $(CCC) -o $@ getchar.c 2514 2515objects/hardcopy.o: hardcopy.c 2516 $(CCC) -o $@ hardcopy.c 2517 2518objects/hashtab.o: hashtab.c 2519 $(CCC) -o $@ hashtab.c 2520 2521objects/gui.o: gui.c 2522 $(CCC) -o $@ gui.c 2523 2524objects/gui_at_fs.o: gui_at_fs.c 2525 $(CCC) -o $@ gui_at_fs.c 2526 2527objects/gui_at_sb.o: gui_at_sb.c 2528 $(CCC) -o $@ gui_at_sb.c 2529 2530objects/gui_athena.o: gui_athena.c 2531 $(CCC) -o $@ gui_athena.c 2532 2533objects/gui_beval.o: gui_beval.c 2534 $(CCC) -o $@ gui_beval.c 2535 2536objects/gui_gtk.o: gui_gtk.c 2537 $(CCC) -o $@ gui_gtk.c 2538 2539objects/gui_gtk_f.o: gui_gtk_f.c 2540 $(CCC) -o $@ gui_gtk_f.c 2541 2542objects/gui_gtk_x11.o: gui_gtk_x11.c 2543 $(CCC) -o $@ gui_gtk_x11.c 2544 2545objects/gui_motif.o: gui_motif.c 2546 $(CCC) -o $@ gui_motif.c 2547 2548objects/gui_xmdlg.o: gui_xmdlg.c 2549 $(CCC) -o $@ gui_xmdlg.c 2550 2551objects/gui_xmebw.o: gui_xmebw.c 2552 $(CCC) -o $@ gui_xmebw.c 2553 2554objects/gui_x11.o: gui_x11.c 2555 $(CCC) -o $@ gui_x11.c 2556 2557objects/gui_photon.o: gui_photon.c 2558 $(CCC) -o $@ gui_photon.c 2559 2560objects/gui_mac.o: gui_mac.c 2561 $(CCC) -o $@ gui_mac.c 2562 2563objects/hangulin.o: hangulin.c 2564 $(CCC) -o $@ hangulin.c 2565 2566objects/if_cscope.o: if_cscope.c 2567 $(CCC) -o $@ if_cscope.c 2568 2569objects/if_xcmdsrv.o: if_xcmdsrv.c 2570 $(CCC) -o $@ if_xcmdsrv.c 2571 2572objects/if_lua.o: if_lua.c 2573 $(CCC) $(LUA_CFLAGS) -o $@ if_lua.c 2574 2575objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2576 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2577 2578mzscheme_base.c: 2579 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2580 2581objects/if_perl.o: auto/if_perl.c 2582 $(CCC) $(PERL_CFLAGS) -o $@ auto/if_perl.c 2583 2584objects/if_perlsfio.o: if_perlsfio.c 2585 $(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c 2586 2587objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2588 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2589 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2590 $(PYTHON_GETPATH_CFLAGS) 2591 2592objects/if_python.o: if_python.c if_py_both.h 2593 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2594 2595objects/if_python3.o: if_python3.c if_py_both.h 2596 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2597 2598objects/if_ruby.o: if_ruby.c 2599 $(CCC) $(RUBY_CFLAGS) -o $@ if_ruby.c 2600 2601objects/if_sniff.o: if_sniff.c 2602 $(CCC) -o $@ if_sniff.c 2603 2604objects/if_tcl.o: if_tcl.c 2605 $(CCC) -o $@ if_tcl.c 2606 2607objects/integration.o: integration.c 2608 $(CCC) -o $@ integration.c 2609 2610objects/main.o: main.c 2611 $(CCC) -o $@ main.c 2612 2613objects/mark.o: mark.c 2614 $(CCC) -o $@ mark.c 2615 2616objects/memfile.o: memfile.c 2617 $(CCC) -o $@ memfile.c 2618 2619objects/memfile_test.o: memfile_test.c 2620 $(CCC) -o $@ memfile_test.c 2621 2622objects/memline.o: memline.c 2623 $(CCC) -o $@ memline.c 2624 2625objects/menu.o: menu.c 2626 $(CCC) -o $@ menu.c 2627 2628objects/message.o: message.c 2629 $(CCC) -o $@ message.c 2630 2631objects/misc1.o: misc1.c 2632 $(CCC) -o $@ misc1.c 2633 2634objects/misc2.o: misc2.c 2635 $(CCC) -o $@ misc2.c 2636 2637objects/move.o: move.c 2638 $(CCC) -o $@ move.c 2639 2640objects/mbyte.o: mbyte.c 2641 $(CCC) -o $@ mbyte.c 2642 2643objects/normal.o: normal.c 2644 $(CCC) -o $@ normal.c 2645 2646objects/ops.o: ops.c 2647 $(CCC) -o $@ ops.c 2648 2649objects/option.o: option.c 2650 $(CCC) -o $@ option.c 2651 2652objects/os_beos.o: os_beos.c 2653 $(CCC) -o $@ os_beos.c 2654 2655objects/os_qnx.o: os_qnx.c 2656 $(CCC) -o $@ os_qnx.c 2657 2658objects/os_macosx.o: os_macosx.m 2659 $(CCC) -o $@ os_macosx.m 2660 2661objects/os_mac_conv.o: os_mac_conv.c 2662 $(CCC) -o $@ os_mac_conv.c 2663 2664objects/os_unix.o: os_unix.c 2665 $(CCC) -o $@ os_unix.c 2666 2667objects/os_mswin.o: os_mswin.c 2668 $(CCC) -o $@ os_mswin.c 2669 2670objects/winclip.o: winclip.c 2671 $(CCC) -o $@ winclip.c 2672 2673objects/pathdef.o: auto/pathdef.c 2674 $(CCC) -o $@ auto/pathdef.c 2675 2676objects/pty.o: pty.c 2677 $(CCC) -o $@ pty.c 2678 2679objects/popupmnu.o: popupmnu.c 2680 $(CCC) -o $@ popupmnu.c 2681 2682objects/quickfix.o: quickfix.c 2683 $(CCC) -o $@ quickfix.c 2684 2685objects/regexp.o: regexp.c regexp_nfa.c 2686 $(CCC) -o $@ regexp.c 2687 2688objects/screen.o: screen.c 2689 $(CCC) -o $@ screen.c 2690 2691objects/search.o: search.c 2692 $(CCC) -o $@ search.c 2693 2694objects/sha256.o: sha256.c 2695 $(CCC) -o $@ sha256.c 2696 2697objects/spell.o: spell.c 2698 $(CCC) -o $@ spell.c 2699 2700objects/syntax.o: syntax.c 2701 $(CCC) -o $@ syntax.c 2702 2703objects/tag.o: tag.c 2704 $(CCC) -o $@ tag.c 2705 2706objects/term.o: term.c 2707 $(CCC) -o $@ term.c 2708 2709objects/ui.o: ui.c 2710 $(CCC) -o $@ ui.c 2711 2712objects/undo.o: undo.c 2713 $(CCC) -o $@ undo.c 2714 2715objects/window.o: window.c 2716 $(CCC) -o $@ window.c 2717 2718objects/workshop.o: workshop.c 2719 $(CCC) -o $@ workshop.c 2720 2721objects/wsdebug.o: wsdebug.c 2722 $(CCC) -o $@ wsdebug.c 2723 2724objects/netbeans.o: netbeans.c 2725 $(CCC) -o $@ netbeans.c 2726 2727Makefile: 2728 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2729 2730############################################################################### 2731### MacOS X installation 2732### 2733### This installs a runnable Vim.app in $(prefix) 2734 2735REZ = /Developer/Tools/Rez 2736RESDIR = $(APPDIR)/Contents/Resources 2737VERSION = $(VIMMAJOR).$(VIMMINOR) 2738 2739### Common flags 2740M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2741 -DAPP_VER=$(VERSION) 2742 2743install_macosx: gui_bundle 2744# Remove the link to the runtime dir, don't want to copy all of that. 2745 -rm $(RESDIR)/vim/runtime 2746 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2747# Generate the help tags file now, it won't work with "make installruntime". 2748 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2749# Install the runtime files. Recursive! 2750 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2751# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2752 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2753 VIMEXE=$$srcdir/$(VIMTARGET) \ 2754 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2755 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2756 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2757 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2758 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2759# Put the link back. 2760 ln -s `pwd`/../runtime $(RESDIR)/vim 2761# Copy rgb.txt, Mac doesn't always have X11 2762 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2763# TODO: Create the vimtutor and/or gvimtutor application. 2764 2765gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2766 bundle-language 2767 2768$(RESDIR): 2769 mkdir -p $@ 2770 2771bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2772# Make a link to the runtime directory, so that we can try out the executable 2773# without installing it. 2774 mkdir -p $(RESDIR)/vim 2775 -ln -s `pwd`/../runtime $(RESDIR)/vim 2776 2777bundle-executable: $(VIMTARGET) 2778 mkdir -p $(APPDIR)/Contents/MacOS 2779 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2780 2781bundle-info: bundle-dir 2782 @echo "Creating PkgInfo" 2783 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2784 @echo "Creating Info.plist" 2785 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2786 2787bundle-resource: bundle-dir bundle-rsrc 2788 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2789 2790### Classic resources 2791# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2792# This file is also required for OS X Vim. 2793bundle-rsrc: os_mac.rsr.hqx 2794 @echo "Creating resource fork" 2795 python dehqx.py $< 2796 rm -f gui_mac.rsrc 2797 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2798 2799# po/Make_osx.pl says something about generating a Mac message file 2800# for Ukrainian. Would somebody using Mac OS X in Ukrainian 2801# *really* be upset that Carbon Vim was not localised in 2802# Ukrainian? 2803# 2804#bundle-language: bundle-dir po/Make_osx.pl 2805# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2806bundle-language: bundle-dir 2807 2808$(APPDIR)/Contents: 2809 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2810 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2811 2812 2813############################################################################### 2814### (automatically generated by 'make depend') 2815### Dependencies: 2816objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 2817 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2818 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2819 globals.h farsi.h arabic.h 2820objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2821 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2822 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2823 arabic.h version.h 2824objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2825 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2826 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2827 arabic.h 2828objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2829 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2830 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2831 arabic.h 2832objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2833 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2834 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2835 arabic.h 2836objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2837 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2838 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2839 arabic.h 2840objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2841 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2842 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2843 arabic.h version.h 2844objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2845 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2846 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2847 arabic.h version.h 2848objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2849 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2850 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2851 globals.h farsi.h arabic.h version.h 2852objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2853 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2854 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2855 globals.h farsi.h arabic.h 2856objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2857 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2858 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2859 arabic.h 2860objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2861 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2862 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2863 globals.h farsi.h arabic.h 2864objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2865 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2866 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2867 arabic.h 2868objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2869 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2870 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2871 arabic.h 2872objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2873 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2874 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2875 arabic.h 2876objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2877 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2878 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2879 globals.h farsi.h arabic.h version.h 2880objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2881 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2882 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2883 arabic.h 2884objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2885 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2886 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2887 globals.h farsi.h arabic.h if_cscope.h 2888objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2889 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2890 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2891 globals.h farsi.h arabic.h version.h 2892objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2893 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2894 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2895 arabic.h farsi.c arabic.c 2896objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2897 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2898 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2899 arabic.h 2900objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2901 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2902 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2903 arabic.h 2904objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2905 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2906 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2907 arabic.h 2908objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2909 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2910 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2911 arabic.h 2912objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2913 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2914 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2915 arabic.h 2916objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2917 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2918 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2919 arabic.h version.h 2920objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2921 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2922 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2923 arabic.h 2924objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2925 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2926 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2927 arabic.h 2928objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2929 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2930 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2931 arabic.h 2932objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2933 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2934 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2935 arabic.h 2936objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2937 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2938 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2939objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2940 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2941 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2942 arabic.h 2943objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2944 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2945 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2946 arabic.h os_unixx.h 2947objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2948 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2949 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2950 globals.h farsi.h arabic.h 2951objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 2952 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2953 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2954 globals.h farsi.h arabic.h 2955objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2956 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2957 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2958 globals.h farsi.h arabic.h 2959objects/regexp.o: regexp.c regexp_nfa.c vim.h auto/config.h feature.h os_unix.h \ 2960 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2961 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2962 globals.h farsi.h arabic.h 2963objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2964 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2965 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2966 arabic.h 2967objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2968 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2969 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2970 arabic.h 2971objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2972 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2973 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2974 arabic.h 2975objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2976 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2977 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2978 arabic.h 2979objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2980 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2981 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2982 arabic.h 2983objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2984 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2985 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2986objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2987 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2988 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2989 arabic.h 2990objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2991 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2992 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2993objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2994 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2995 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2996 arabic.h 2997objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2998 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2999 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3000 arabic.h version.h 3001objects/winclip.o: winclip.c vimio.h vim.h auto/config.h feature.h os_unix.h \ 3002 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3003 regexp.h gui.h ex_cmds.h proto.h globals.h farsi.h arabic.h \ 3004 proto/winclip.pro 3005objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3006 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3007 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3008 arabic.h 3009objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3010 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3011 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3012objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 3013 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3014 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3015 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 3016objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 3017 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3018 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3019 globals.h farsi.h arabic.h gui_gtk_f.h 3020objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 3021 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3022 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3023 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3024 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3025 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3026 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3027 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3028 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3029 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3030 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3031 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3032 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3033 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3034 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3035 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3036 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3037 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3038 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3039 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3040 ../pixmaps/tb_minwidth.xpm 3041objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 3042 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3043 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3044 globals.h farsi.h arabic.h 3045objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 3046 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3047 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3048 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3049objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 3050 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3051 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3052 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3053 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3054 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3055 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3056 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3057 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3058 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3059 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3060 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3061 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3062 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3063 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3064 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3065 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3066 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3067 ../pixmaps/tb_minwidth.xpm 3068objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 3069 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3070 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3071 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 3072 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3073objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3074 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3075 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3076 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3077 ../runtime/vim48x48.xpm 3078objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3079 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3080 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3081 globals.h farsi.h arabic.h gui_at_sb.h 3082objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3083 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3084 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3085 globals.h farsi.h arabic.h gui_at_sb.h 3086objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3087 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3088 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3089objects/memfile_test.o: memfile_test.c main.c vim.h auto/config.h feature.h \ 3090 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3091 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3092 proto.h globals.h farsi.h arabic.h farsi.c arabic.c memfile.c 3093objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3094 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3095 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3096 globals.h farsi.h arabic.h 3097objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3098 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3099 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3100 arabic.h 3101objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3102 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3103 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3104 globals.h farsi.h arabic.h if_mzsch.h 3105objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3106 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3107 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3108 globals.h farsi.h arabic.h 3109objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3110 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3111 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3112 globals.h farsi.h arabic.h 3113objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3114 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3115 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3116 globals.h farsi.h arabic.h if_py_both.h 3117objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3118 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3119 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3120 globals.h farsi.h arabic.h if_py_both.h 3121objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3122 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3123 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3124 arabic.h 3125objects/if_ruby.o: if_ruby.c auto/config.h vim.h feature.h os_unix.h auto/osdef.h \ 3126 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3127 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3128 arabic.h version.h 3129objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3130 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3131 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3132 globals.h farsi.h arabic.h os_unixx.h 3133objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3134 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3135 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3136 globals.h farsi.h arabic.h 3137objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3138 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3139 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3140 proto.h globals.h farsi.h arabic.h version.h workshop.h 3141objects/wsdebug.o: wsdebug.c 3142objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3143 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3144 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3145 globals.h farsi.h arabic.h integration.h 3146objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3147 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3148 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3149 globals.h farsi.h arabic.h version.h 3150
