1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 235# Sun curses library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284# Defaults used when auto/config.mk does not exist. 285srcdir = . 286VIMNAME = vim 287EXNAME = ex 288VIEWNAME = view 289 290######################## auto/config.mk ######################## {{{1 291# At this position auto/config.mk is included. When starting from the 292# toplevel Makefile it is almost empty. After running auto/configure it 293# contains settings that have been discovered for your system. Settings below 294# this include override settings in auto/config.mk! 295 296# Note: If make fails because auto/config.mk does not exist (it is not 297# included in the repository), do: 298# cp config.mk.dist auto/config.mk 299 300# (X) How to include auto/config.mk depends on the version of "make" you have, 301# if the current choice doesn't work, try the other one. 302 303include auto/config.mk 304#.include "auto/config.mk" 305CClink = $(CC) 306 307#}}} 308 309# Include the configuration choices first, so we can override everything 310# below. As shipped, this file contains a target that causes to run 311# configure. Once configure was run, this file contains a list of 312# make variables with predefined values instead. Thus any second invocation 313# of make, will build Vim. 314 315# CONFIGURE - configure arguments {{{1 316# You can give a lot of options to configure. 317# Change this to your desire and do 'make config' afterwards 318 319# examples (can only use one!): 320#CONF_ARGS = --exec-prefix=/usr 321#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 322#CONF_ARGS = --with-global-runtime=/etc/vim 323#CONF_ARGS = --with-local-dir=/usr/share 324#CONF_ARGS = --without-local-dir 325 326# Use this one if you distribute a modified version of Vim. 327#CONF_ARGS = --with-modified-by="John Doe" 328 329# GUI - For creating Vim with GUI (gvim) (B) 330# Uncomment this line when you don't want to get the GUI version, although you 331# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 332# at all. 333#CONF_OPT_GUI = --disable-gui 334 335# Uncomment one of these lines if you have that GUI but don't want to use it. 336# The automatic check will use another one that can be found. 337# Gnome is disabled by default, it may cause trouble. 338#CONF_OPT_GUI = --disable-gtk2-check 339#CONF_OPT_GUI = --enable-gnome2-check 340#CONF_OPT_GUI = --disable-motif-check 341#CONF_OPT_GUI = --disable-athena-check 342#CONF_OPT_GUI = --disable-nextaw-check 343 344# Uncomment one of these lines to select a specific GUI to use. 345# When using "yes" or nothing, configure will use the first one found: GTK+, 346# Motif or Athena. 347# 348# GTK versions that are known not to work 100% are rejected. 349# Use "--disable-gtktest" to accept them anyway. 350# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 351# 352# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 353# is used then GNOME will automatically be used if it is found. If you have 354# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 355# --enable-gui=gtk or leave out --enable-gnome-check. 356# 357# If the selected GUI isn't found, the GUI is disabled automatically 358#CONF_OPT_GUI = --enable-gui=gtk2 359#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 360#CONF_OPT_GUI = --enable-gui=gnome2 361#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 362#CONF_OPT_GUI = --enable-gui=motif 363#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 364#CONF_OPT_GUI = --enable-gui=athena 365#CONF_OPT_GUI = --enable-gui=nextaw 366 367# Carbon GUI for Mac OS X 368#CONF_OPT_GUI = --enable-gui=carbon 369 370# DARWIN - detecting Mac OS X 371# Uncomment this line when you want to compile a Unix version of Vim on 372# Darwin. None of the Mac specific options or files will be used. 373#CONF_OPT_DARWIN = --disable-darwin 374 375# Select the architecture supported. Default is to build for the current 376# platform. Use "both" for a universal binary. That probably doesn't work 377# when including Perl, Python, etc. 378#CONF_OPT_DARWIN = --with-mac-arch=i386 379#CONF_OPT_DARWIN = --with-mac-arch=ppc 380#CONF_OPT_DARWIN = --with-mac-arch=both 381 382# Uncomment the next line to fail if one of the requested language interfaces 383# cannot be configured. Without this Vim will be build anyway, without 384# the failing interfaces. 385#CONF_OPT_FAIL = --enable-fail-if-missing 386 387# LUA 388# Uncomment one of these when you want to include the Lua interface. 389# First one is for static linking, second one for dynamic loading. 390# Use --with-luajit if you want to use LuaJIT instead of Lua. 391# Set PATH environment variable to find lua or luajit executable. 392#CONF_OPT_LUA = --enable-luainterp 393#CONF_OPT_LUA = --enable-luainterp=dynamic 394#CONF_OPT_LUA = --enable-luainterp --with-luajit 395#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 396# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 397#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 398 399# MZSCHEME 400# Uncomment this when you want to include the MzScheme interface. 401#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 402# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 403#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 404#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 405#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 406 407# PERL 408# Uncomment one of these when you want to include the Perl interface. 409# First one is for static linking, second one for dynamic loading. 410# The Perl option sometimes causes problems, because it adds extra flags 411# 412# to the command line. If you see strange flags during compilation, check in 413# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 414# the next line. 415# When you get an error for a missing "perl.exp" file, try creating an empty 416# one: "touch perl.exp". 417# This requires at least "small" features, "tiny" doesn't work. 418#CONF_OPT_PERL = --enable-perlinterp 419#CONF_OPT_PERL = --enable-perlinterp=dynamic 420 421# PYTHON 422# Uncomment this when you want to include the Python interface. 423# Requires small features or better, fails with tiny features. 424# NOTE: This may cause threading to be enabled, which has side effects (such 425# as using different libraries and debugging becomes more difficult). 426# NOTE: Using this together with Perl may cause a crash in initialization. 427# For Python3 support make a symbolic link in /usr/local/bin: 428# ln -s python3 python3.1 429# If both python2.x and python3.x are enabled then the linking will be via 430# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 431# However, this may still cause problems, such as "import termios" failing. 432# Build two separate versions of Vim in that case. 433#CONF_OPT_PYTHON = --enable-pythoninterp 434#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 435#CONF_OPT_PYTHON3 = --enable-python3interp 436#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 437 438# RUBY 439# Uncomment this when you want to include the Ruby interface. 440# First one for static linking, second one for loading when used. 441# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 442#CONF_OPT_RUBY = --enable-rubyinterp 443#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 444#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 445 446# TCL 447# Uncomment this when you want to include the Tcl interface. 448# First one is for static linking, second one for dynamic loading. 449#CONF_OPT_TCL = --enable-tclinterp 450#CONF_OPT_TCL = --enable-tclinterp=dynamic 451#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 452 453# CSCOPE 454# Uncomment this when you want to include the Cscope interface. 455#CONF_OPT_CSCOPE = --enable-cscope 456 457# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 458#CONF_OPT_WORKSHOP = --enable-workshop 459 460# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 461# Motif version must have XPM libraries (see |workshop-xpm|). 462# Uncomment this when you do not want the netbeans interface. 463#CONF_OPT_NETBEANS = --disable-netbeans 464 465# CHANNEL - inter process communication. Same conditions as NetBeans. 466# Uncomment this when you do not want inter process communication. 467#CONF_OPT_CHANNEL = --disable-channel 468 469# SNIFF - Include support for SNiFF+. 470#CONF_OPT_SNIFF = --enable-sniff 471 472# MULTIBYTE - To edit multi-byte characters. 473# Uncomment this when you want to edit a multibyte language. 474# It's automatically enabled with normal features, GTK or IME support. 475# Note: Compile on a machine where setlocale() actually works, otherwise the 476# configure tests may fail. 477#CONF_OPT_MULTIBYTE = --enable-multibyte 478 479# NLS - National Language Support 480# Uncomment this when you do not want to support translated messages, even 481# though configure can find support for it. 482#CONF_OPT_NLS = --disable-nls 483 484# XIM - X Input Method. Special character input support for X11 (Chinese, 485# Japanese, special symbols, etc). Also needed for dead-key support. 486# When omitted it's automatically enabled for the X-windows GUI. 487# HANGUL - Input Hangul (Korean) language using internal routines. 488# Uncomment one of these when you want to input a multibyte language. 489#CONF_OPT_INPUT = --enable-xim 490#CONF_OPT_INPUT = --disable-xim 491#CONF_OPT_INPUT = --enable-hangulinput 492 493# FONTSET - X fontset support for output of languages with many characters. 494# Uncomment this when you want to output a multibyte language. 495#CONF_OPT_OUTPUT = --enable-fontset 496 497# ACL - Uncomment this when you do not want to include ACL support, even 498# though your system does support it. E.g., when it's buggy. 499#CONF_OPT_ACL = --disable-acl 500 501# gpm - For mouse support on Linux console via gpm 502# Uncomment this when you do not want to include gpm support, even 503# though you have gpm libraries and includes. 504#CONF_OPT_GPM = --disable-gpm 505 506# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 507# Uncomment this when you do not want do include sysmouse support, even 508# though you have /dev/sysmouse and includes. 509#CONF_OPT_SYSMOUSE = --disable-sysmouse 510 511# FEATURES - For creating Vim with more or less features 512# Uncomment one of these lines when you want to include few to many features. 513# The default is "huge" for most systems. 514#CONF_OPT_FEAT = --with-features=tiny 515#CONF_OPT_FEAT = --with-features=small 516#CONF_OPT_FEAT = --with-features=normal 517#CONF_OPT_FEAT = --with-features=big 518#CONF_OPT_FEAT = --with-features=huge 519 520# COMPILED BY - For including a specific e-mail address for ":version". 521#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 522 523# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 524# (otherwise Vim configure will try to include xterm titlebar access) 525# Also disable the GUI above, otherwise it will be included anyway. 526# When both GUI and X11 have been disabled this may save about 15% of the 527# code and make Vim startup quicker. 528#CONF_OPT_X = --without-x 529 530# X WINDOWS DIRECTORY - specify X directories 531# If configure can't find you X stuff, or if you have multiple X11 derivatives 532# installed, you may wish to specify which one to use. 533# Select nothing to let configure choose. 534# This here selects openwin (as found on sun). 535#XROOT = /usr/openwin 536#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 537 538# X11 Session Management Protocol support 539# Vim will try to use XSMP to catch the user logging out if there are unsaved 540# files. Uncomment this line to disable that (it prevents vim trying to open 541# communications with the session manager). 542#CONF_OPT_XSMP = --disable-xsmp 543 544# You may wish to include xsmp but use exclude xsmp-interact if the logout 545# XSMP functionality does not work well with your session-manager (at time of 546# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 547# applications after Vim has cancelled a logout (until Vim quits). This 548# *might* be the Vim code, but is more likely a bug in early GNOME-1. 549# This disables the dialog that asks you if you want to save files or not. 550#CONF_OPT_XSMP = --disable-xsmp-interact 551 552# COMPILER - Name of the compiler {{{1 553# The default from configure will mostly be fine, no need to change this, just 554# an example. If a compiler is defined here, configure will use it rather than 555# probing for one. It is dangerous to change this after configure was run. 556# Make will use your choice then -- but beware: Many things may change with 557# another compiler. It is wise to run 'make reconfig' to start all over 558# again. 559#CC = cc 560#CC = gcc 561#CC = clang 562 563# COMPILER FLAGS - change as you please. Either before running {{{1 564# configure or afterwards. For examples see below. 565# When using -g with some older versions of Linux you might get a 566# statically linked executable. 567# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 568#CFLAGS = -g 569#CFLAGS = -O 570 571# Optimization limits - depends on the compiler. Automatic check in configure 572# doesn't work very well, because many compilers only give a warning for 573# unrecognized arguments. 574#CFLAGS = -O -OPT:Olimit=2600 575#CFLAGS = -O -Olimit 2000 576#CFLAGS = -O -FOlimit,2000 577 578# Often used for GCC: mixed optimizing, lot of optimizing, debugging 579#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 580#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 581#CFLAGS = -g -Wall -Wmissing-prototypes 582#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 583#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 584#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 585 586# Use this with GCC to check for mistakes, unused arguments, etc. 587#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 588#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG 589#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 590#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 591 592# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 593# allocated memory (and makes every malloc()/free() very slow). 594# Electric Fence is free (search ftp sites). 595# You may want to set the EF_PROTECT_BELOW environment variable to check the 596# other side of allocated memory. 597# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 598# as root: sysctl -w vm.max_proc_mmap=30000 599#EXTRA_LIBS = /usr/local/lib/libefence.a 600 601# Autoconf binary. 602AUTOCONF = autoconf 603 604# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 605#PURIFY = purify 606 607# NBDEBUG - debugging the netbeans interface. 608#EXTRA_DEFS = -DNBDEBUG 609 610# }}} 611 612# LINT - for running lint 613# For standard Unix lint 614LINT = lint 615LINT_OPTIONS = -beprxzF 616# For splint 617# It doesn't work well, crashes on include files and non-ascii characters. 618#LINT = splint 619#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 620 621# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 622# Might not work with GUI or Perl. 623# For unknown reasons adding "-lc" fixes a linking problem with some versions 624# of GCC. That's probably a bug in the "-pg" implementation. 625# After running Vim see the profile result with: gprof vim gmon.out | vim - 626# Need to recompile everything after changing this: "make clean" "make". 627#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 628#PROFILE_LIBS = -pg 629#PROFILE_LIBS = -pg -lc 630 631 632# TEST COVERAGE - Uncomment the two lines below the explanation to get code 633# coverage information. (provided by Yegappan Lakshmanan) 634# 1. make clean, run configure and build Vim as usual. 635# 2. Generate the baseline code coverage information: 636# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 637# 3. Run "make test" to run the unit tests. The code coverage information will 638# be generated in the src/objects directory. 639# 4. Generate the code coverage information from the tests: 640# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 641# 5. Combine the baseline and test code coverage data: 642# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 643# 6. Process the test coverage data and generate a report in html: 644# $ genhtml objects/coverage_total.info -o objects 645# 7. Open the objects/index.html file in a web browser to view the coverage 646# information. 647# 648# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 649# LDFLAGS=--coverage 650 651 652# Uncomment one of the next two lines to compile Vim with the 653# address sanitizer or with the undefined sanitizer. Works with gcc and 654# clang. May make Vim twice as slow. Errors reported on stderr. 655# More at: https://code.google.com/p/address-sanitizer/ 656#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 657#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 658SANITIZER_LIBS = $(SANITIZER_CFLAGS) 659 660# MEMORY LEAK DETECTION 661# Requires installing the ccmalloc library. 662# Configuration is in the .ccmalloc or ~/.ccmalloc file. 663# Doesn't work very well, since memory linked to from global variables 664# (in libraries) is also marked as leaked memory. 665#LEAK_CFLAGS = -DEXITFREE 666#LEAK_LIBS = -lccmalloc 667 668##################################################### 669### Specific systems, check if yours is listed! ### {{{ 670##################################################### 671 672### Uncomment things here only if the values chosen by configure are wrong. 673### It's better to adjust configure.in and "make autoconf", if you can! 674### Then send the required changes to configure.in to the bugs list. 675 676### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 677### 678#CC = shlicc2 679#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 680 681### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 682### The first probably works on all systems 683### The second should work a bit better on newer systems 684### The third should work a bit better on HPUX 11.11 685### Information provided by: Richard Allen <[email protected]> 686#CC = c89 -D_HPUX_SOURCE 687#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 688#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 689 690### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 691### when the default (ISO) digraphs look completely wrong. 692### After changing this do "touch digraph.c; make". 693#EXTRA_DEFS = -DHPUX_DIGRAPHS 694 695### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 696### is too small to compile many routines. It produces too much defining 697### and no space errors. 698### Uncomment the following to specify a larger macro definition table. 699#CFLAGS = -Wp,-H256000 700 701### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 702### libraries in /usr/lib instead of /lib (avoiding transition links). 703### Information provided by: David Green 704#XROOT = /usr 705#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 706#GUI_INC_LOC = -I/usr/include/Motif1.2 707#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 708 709### (5) AIX 4.1.4 with cc 710#CFLAGS = -O -qmaxmem=8192 711 712### AIX with c89 (Walter Briscoe) 713#CC = c89 714#CPPFLAGS = -D_ALL_SOURCE 715 716### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 717# needed to avoid a problem where strings.h gets included 718#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 719 720### (W) Solaris with multi-threaded libraries (-lthread): 721### If suspending doesn't work properly, try using this line: 722#EXTRA_DEFS = -D_REENTRANT 723 724### (7) Solaris 2.4/2.5 with Centerline compiler 725#CC = clcc 726#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 727#CFLAGS = -O 728 729### (9) Solaris 2.x with cc (SunPro), using Athena. 730### Only required for compiling gui_at_sb.c. 731### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 732### Use one of the lines (either Full ANSI or no ANSI at all) 733#CFLAGS = $(CFLAGS) -Xc 734#CFLAGS = $(CFLAGS) -Xs 735 736### Solaris 2.3 with X11 and specific cc 737#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 738 739### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 740#CC = /usr/ucb/cc 741#EXTRA_LIBS = -R/usr/ucblib 742 743### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 744# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 745#CC = cc 746#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 747#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 748#XPM_IPATH = -I$(XPM_DIR)/include 749#EXTRA_LIBS = $(XPM_LIB) 750#EXTRA_IPATHS = $(XPM_IPATH) 751#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 752 753### Solaris with workshop compilers: Vim is unstable when compiled with 754# "-fast". Use this instead. (Shea Martin) 755#CFLAGS = -x02 -xtarget=ultra 756 757### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 758#LDFLAGS = -lw -ldl -lXmu 759#GUI_LIB_LOC = -L/usr/local/lib 760 761### (8) Unisys 6035 (Glauber Ribeiro) 762#EXTRA_LIBS = -lnsl -lsocket -lgen 763 764### When builtin functions cause problems with gcc (for Sun 4.1.x) 765#CFLAGS = -O2 -Wall -traditional -Wno-implicit 766 767### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 768#EXTRA_DEFS = -DDOMAIN 769#CFLAGS= -O -A systype,bsd4.3 770 771### Coherent 4.2.10 on Intel 386 platform 772#EXTRA_DEFS = -Dvoid=int 773#EXTRA_LIBS = -lterm -lsocket 774 775### SCO 3.2, with different library name for terminfo 776#EXTRA_LIBS = -ltinfo 777 778### UTS2 for Amdahl UTS 2.1.x 779#EXTRA_DEFS = -DUTS2 780#EXTRA_LIBS = -lsocket 781 782### UTS4 for Amdahl UTS 4.x 783#EXTRA_DEFS = -DUTS4 -Xa 784 785### USL for Unix Systems Laboratories (SYSV 4.2) 786#EXTRA_DEFS = -DUSL 787 788### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 789#CC= gcc -D_POSIX_SOURCE 790#CFLAGS= -O2 791#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 792 793### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 794### Also use the CONF_TERM_LIB below! 795#EXTRA_LIBS = -lgen 796 797### (D) QNX (by G.F. Desrochers) 798#CFLAGS = -g -O -mf -4 799 800### (F) QNX (by John Oleynick) 801# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 802# CONF_OPT_X = --without-x. 803# 2. make config 804# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 805# have -ldir (does config find it somewhere?) and -ltermcap has at 806# least one problem so I use termlib.o instead. The problem with 807# termcap is that it segfaults if you call it with the name of 808# a non-existent terminal type. 809# 4. edit auto/config.h and add #define USE_TMPNAM 810# 5. add termlib.o to OBJ 811# 6. make 812 813### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 814#EXTRA_LIBS = -lgen 815 816### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 817#EXTRA_LIBS = -lgen -lnsl 818### For SINIX-Y this is needed for the right prototype of gettimeofday() 819#EXTRA_DEFS = -D_XPG_IV 820 821### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 822# Use both "-F O3" lines for optimization or the "-g" line for debugging 823#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 824#CFLAGS = -F O3 -DSINIXN 825#LDFLAGS = -F O3 826#CFLAGS = -g -DSINIXN 827 828### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 829#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 830#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 831 832### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 833#GUI_INC_LOC = -I/usr/include 834#GUI_LIB_LOC = -L/usr/lib 835#EXTRA_LIBS = -lgen 836 837### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 838#GUI_INC_LOC = -I/usr/necccs/include 839#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 840#XROOT = /usr/necccs 841#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 842#EXTRA_LIBS = -lsocket -lgen 843 844### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 845# Not needed for Irix 5.3, Ives Aerts reported 846#EXTRA_LIBS = -lmalloc -lc_s 847# Irix 4.0, when regexp and regcmp cannot be found when linking: 848#EXTRA_LIBS = -lmalloc -lc_s -lPW 849 850### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 851# Note: This newer option style is used with the MipsPro compilers ONLY if 852# you are compiling an "n32" or "64" ABI binary (use either a -n32 853# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 854# then the CFLAGS option format will be the typical style (i.e. 855# -Olimit 3000). 856#CFLAGS = -OPT:Olimit=3000 -O 857 858### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 859# compiler features! Beware, the optimization is EXTREMELY thorough 860# and takes quite a long time. 861# Note: See the note above. Here, the -mips3 option automatically 862# enables either the "n32" or "64" ABI, depending on what machine you 863# are compiling on (n32 is explicitly enabled here, just to make sure). 864#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 865#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 866 867### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 868### Suggested by Jon Wright <[email protected]>. 869### Tested on R8000 IRIX6.1 Power Indigo2. 870### Check /etc/compiler.defaults for your compiler settings. 871# either (for 64 bit pointers) uncomment the following line 872#GUI_LIB_LOC = -L/usr/lib64 873# then 874# 1) make config 875# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 876# 3) make 877# 878# or (for 32bit pointers) uncomment the following line 879#EXTRA_DEFS = -n32 880#GUI_LIB_LOC = -L/usr/lib32 881# then 882# 1) make config 883# 2) edit auto/config.mk, add -n32 to LDFLAGS 884# 3) make 885# 886#Alternatively: use -o32 instead of -n32. 887### 888 889### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 890### which is found by configure, doesn't work correctly. Symptom is the 891### error message "Termcap entry too long". Uncomment the next line. 892### On AIX 4.2.1 (and other versions probably), libtermcap is reported 893### not to display properly. 894### after changing this, you need to do "make reconfig". 895#CONF_TERM_LIB = --with-tlib=curses 896 897### (E) If you want to use termlib library instead of the automatically found 898### one. After changing this, you need to do "make reconfig". 899#CONF_TERM_LIB = --with-tlib=termlib 900 901### (a) ESIX V4.2 (Reinhard Wobst) 902#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 903 904### (c) Tandem/NSK (Matthew Woehlke) 905#EXTRA_LIBS = -lfloss 906 907### If you want to use ncurses library instead of the automatically found one 908### after changing this, you need to do "make reconfig". 909#CONF_TERM_LIB = --with-tlib=ncurses 910 911### For GCC on MSDOS, the ".exe" suffix will be added. 912#EXEEXT = .exe 913#LNKEXT = .exe 914 915### (O) For LynxOS 2.5.0, tested on PC. 916#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 917### For LynxOS 3.0.1, tested on PPC 918#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 919### For LynxOS 3.1.0, tested on PC 920#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 921 922 923### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 924### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 925#CFLAGS = -O -Qtarget=m88110compat 926#EXTRA_LIBS = -lgen 927 928# The value of QUOTESED comes from auto/config.mk. 929# Uncomment the next line to use the default value. 930# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 931 932##################### end of system specific lines ################### }}} 933 934### Names of the programs and targets {{{1 935VIMTARGET = $(VIMNAME)$(EXEEXT) 936EXTARGET = $(EXNAME)$(LNKEXT) 937VIEWTARGET = $(VIEWNAME)$(LNKEXT) 938GVIMNAME = g$(VIMNAME) 939GVIMTARGET = $(GVIMNAME)$(LNKEXT) 940GVIEWNAME = g$(VIEWNAME) 941GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 942RVIMNAME = r$(VIMNAME) 943RVIMTARGET = $(RVIMNAME)$(LNKEXT) 944RVIEWNAME = r$(VIEWNAME) 945RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 946RGVIMNAME = r$(GVIMNAME) 947RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 948RGVIEWNAME = r$(GVIEWNAME) 949RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 950VIMDIFFNAME = $(VIMNAME)diff 951GVIMDIFFNAME = g$(VIMDIFFNAME) 952VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 953GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 954EVIMNAME = e$(VIMNAME) 955EVIMTARGET = $(EVIMNAME)$(LNKEXT) 956EVIEWNAME = e$(VIEWNAME) 957EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 958 959### Names of the tools that are also made {{{1 960TOOLS = xxd/xxd$(EXEEXT) 961 962### Installation directories. The defaults come from configure. {{{1 963# 964### prefix the top directory for the data (default "/usr/local") 965# 966# Uncomment the next line to install Vim in your home directory. 967#prefix = $(HOME) 968 969### exec_prefix is the top directory for the executable (default $(prefix)) 970# 971# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 972#exec_prefix = /usr/machine 973 974### BINDIR dir for the executable (default "$(exec_prefix)/bin") 975### MANDIR dir for the manual pages (default "$(prefix)/man") 976### DATADIR dir for the other files (default "$(prefix)/lib" or 977# "$(prefix)/share") 978# They may be different when using different architectures for the 979# executable and a common directory for the other files. 980# 981# Uncomment the next line to install Vim in "/usr/bin" 982#BINDIR = /usr/bin 983# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 984#MANDIR = /usr/share/man 985# Uncomment the next line to install Vim help files in "/usr/share/vim" 986#DATADIR = /usr/share 987 988### DESTDIR root of the installation tree. This is prepended to the other 989# directories. This directory must exist. 990#DESTDIR = ~/pkg/vim 991 992### Directory of the man pages 993MAN1DIR = /man1 994 995### Vim version (adjusted by a script) 996VIMMAJOR = 7 997VIMMINOR = 4 998 999### Location of Vim files (should not need to be changed, and {{{1 1000### some things might not work when they are changed!) 1001VIMDIR = /vim 1002VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1003HELPSUBDIR = /doc 1004COLSUBDIR = /colors 1005SYNSUBDIR = /syntax 1006INDSUBDIR = /indent 1007AUTOSUBDIR = /autoload 1008PLUGSUBDIR = /plugin 1009FTPLUGSUBDIR = /ftplugin 1010LANGSUBDIR = /lang 1011COMPSUBDIR = /compiler 1012KMAPSUBDIR = /keymap 1013MACROSUBDIR = /macros 1014TOOLSSUBDIR = /tools 1015TUTORSUBDIR = /tutor 1016SPELLSUBDIR = /spell 1017PRINTSUBDIR = /print 1018PODIR = po 1019 1020### VIMLOC common root of the Vim files (all versions) 1021### VIMRTLOC common root of the runtime Vim files (this version) 1022### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1023### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1024### HELPSUBLOC location for help files 1025### COLSUBLOC location for colorscheme files 1026### SYNSUBLOC location for syntax files 1027### INDSUBLOC location for indent files 1028### AUTOSUBLOC location for standard autoload files 1029### PLUGSUBLOC location for standard plugin files 1030### FTPLUGSUBLOC location for ftplugin files 1031### LANGSUBLOC location for language files 1032### COMPSUBLOC location for compiler files 1033### KMAPSUBLOC location for keymap files 1034### MACROSUBLOC location for macro files 1035### TOOLSSUBLOC location for tools files 1036### TUTORSUBLOC location for tutor files 1037### SPELLSUBLOC location for spell files 1038### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1039### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1040### You can override these if you want to install them somewhere else. 1041### Edit feature.h for compile-time settings. 1042VIMLOC = $(DATADIR)$(VIMDIR) 1043VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1044VIMRCLOC = $(VIMLOC) 1045HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1046COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1047SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1048INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1049AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1050PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1051FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1052LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1053COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1054KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1055MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1056TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1057TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1058SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1059PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1060SCRIPTLOC = $(VIMRTLOC) 1061 1062### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1063### the runtime directory is not below it. 1064#VIMRUNTIMEDIR = $(VIMRTLOC) 1065 1066### Name of the evim file target. 1067EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1068MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1069 1070### Name of the menu file target. 1071SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1072SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1073SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1074 1075### Name of the bugreport file target. 1076SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1077 1078### Name of the file type detection file target. 1079SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1080 1081### Name of the file type detection file target. 1082SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1083 1084### Name of the file type detection script file target. 1085SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1086 1087### Name of the ftplugin-on file target. 1088SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1089 1090### Name of the ftplugin-off file target. 1091SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1092 1093### Name of the indent-on file target. 1094SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1095 1096### Name of the indent-off file target. 1097SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1098 1099### Name of the option window script file target. 1100SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1101 1102# Program to install the program in the target directory. Could also be "mv". 1103INSTALL_PROG = cp 1104 1105# Program to install the data in the target directory. Cannot be "mv"! 1106INSTALL_DATA = cp 1107INSTALL_DATA_R = cp -r 1108 1109### Program to run on installed binary. Use the second one to disable strip. 1110#STRIP = strip 1111#STRIP = /bin/true 1112 1113### Permissions for binaries {{{1 1114BINMOD = 755 1115 1116### Permissions for man page 1117MANMOD = 644 1118 1119### Permissions for help files 1120HELPMOD = 644 1121 1122### Permissions for Perl and shell scripts 1123SCRIPTMOD = 755 1124 1125### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1126VIMSCRIPTMOD = 644 1127 1128### Permissions for all directories that are created 1129DIRMOD = 755 1130 1131### Permissions for all other files that are created 1132FILEMOD = 644 1133 1134# Where to copy the man and help files from 1135HELPSOURCE = ../runtime/doc 1136 1137# Where to copy the script files from (menu, bugreport) 1138SCRIPTSOURCE = ../runtime 1139 1140# Where to copy the colorscheme files from 1141COLSOURCE = ../runtime/colors 1142 1143# Where to copy the syntax files from 1144SYNSOURCE = ../runtime/syntax 1145 1146# Where to copy the indent files from 1147INDSOURCE = ../runtime/indent 1148 1149# Where to copy the standard plugin files from 1150AUTOSOURCE = ../runtime/autoload 1151 1152# Where to copy the standard plugin files from 1153PLUGSOURCE = ../runtime/plugin 1154 1155# Where to copy the ftplugin files from 1156FTPLUGSOURCE = ../runtime/ftplugin 1157 1158# Where to copy the macro files from 1159MACROSOURCE = ../runtime/macros 1160 1161# Where to copy the tools files from 1162TOOLSSOURCE = ../runtime/tools 1163 1164# Where to copy the tutor files from 1165TUTORSOURCE = ../runtime/tutor 1166 1167# Where to copy the spell files from 1168SPELLSOURCE = ../runtime/spell 1169 1170# Where to look for language specific files 1171LANGSOURCE = ../runtime/lang 1172 1173# Where to look for compiler files 1174COMPSOURCE = ../runtime/compiler 1175 1176# Where to look for keymap files 1177KMAPSOURCE = ../runtime/keymap 1178 1179# Where to look for print resource files 1180PRINTSOURCE = ../runtime/print 1181 1182# If you are using Linux, you might want to use this to make vim the 1183# default vi editor, it will create a link from vi to Vim when doing 1184# "make install". An existing file will be overwritten! 1185# When not using it, some make programs can't handle an undefined $(LINKIT). 1186#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1187LINKIT = @echo >/dev/null 1188 1189### 1190### GRAPHICAL USER INTERFACE (GUI). {{{1 1191### 'configure --enable-gui' can enable one of these for you if you did set 1192### a corresponding CONF_OPT_GUI above and have X11. 1193### Override configures choice by uncommenting all the following lines. 1194### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1195### for enabling the Athena or Motif GUI. 1196#GUI_SRC = $(NONE_SRC) 1197#GUI_OBJ = $(NONE_OBJ) 1198#GUI_DEFS = $(NONE_DEFS) 1199#GUI_IPATH = $(NONE_IPATH) 1200#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1201#GUI_LIBS1 = $(NONE_LIBS1) 1202#GUI_LIBS2 = $(NONE_LIBS2) 1203#GUI_INSTALL = $(NONE_INSTALL) 1204#GUI_TARGETS = $(NONE_TARGETS) 1205#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1206#GUI_TESTTARGET = $(NONE_TESTTARGET) 1207#GUI_BUNDLE = $(NONE_BUNDLE) 1208 1209# Without a GUI install the normal way. 1210NONE_INSTALL = install_normal 1211 1212### GTK GUI 1213GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1214 gui_beval.c $(GRESOURCE_SRC) 1215GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1216 objects/pty.o objects/gui_gtk_f.o \ 1217 objects/gui_beval.o $(GRESOURCE_OBJ) 1218GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1219GTK_IPATH = $(GUI_INC_LOC) 1220GTK_LIBS_DIR = $(GUI_LIB_LOC) 1221GTK_LIBS1 = 1222GTK_LIBS2 = $(GTK_LIBNAME) 1223GTK_INSTALL = install_normal install_gui_extra 1224GTK_TARGETS = installglinks 1225GTK_MAN_TARGETS = yes 1226GTK_TESTTARGET = gui 1227GTK_BUNDLE = 1228 1229### Motif GUI 1230MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1231 gui_xmdlg.c gui_xmebw.c 1232MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1233 objects/pty.o objects/gui_beval.o \ 1234 objects/gui_xmdlg.o objects/gui_xmebw.o 1235MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1236MOTIF_IPATH = $(GUI_INC_LOC) 1237MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1238MOTIF_LIBS1 = 1239MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1240MOTIF_INSTALL = install_normal install_gui_extra 1241MOTIF_TARGETS = installglinks 1242MOTIF_MAN_TARGETS = yes 1243MOTIF_TESTTARGET = gui 1244MOTIF_BUNDLE = 1245 1246### Athena GUI 1247### Use Xaw3d to make the menus look a little bit nicer 1248#XAW_LIB = -lXaw3d 1249XAW_LIB = -lXaw 1250 1251### When using Xaw3d, uncomment/comment the following lines to also get the 1252### scrollbars from Xaw3d. 1253#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1254#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1255# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1256#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1257# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1258# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1259ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1260 gui_at_sb.c gui_at_fs.c 1261ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1262 objects/pty.o objects/gui_beval.o \ 1263 objects/gui_at_sb.o objects/gui_at_fs.o 1264ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1265 1266ATHENA_IPATH = $(GUI_INC_LOC) 1267ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1268ATHENA_LIBS1 = $(XAW_LIB) 1269ATHENA_LIBS2 = -lXt 1270ATHENA_INSTALL = install_normal install_gui_extra 1271ATHENA_TARGETS = installglinks 1272ATHENA_MAN_TARGETS = yes 1273ATHENA_TESTTARGET = gui 1274ATHENA_BUNDLE = 1275 1276### neXtaw GUI 1277NEXTAW_LIB = -lneXtaw 1278 1279NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1280NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1281 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1282NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1283 1284NEXTAW_IPATH = $(GUI_INC_LOC) 1285NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1286NEXTAW_LIBS1 = $(NEXTAW_LIB) 1287NEXTAW_LIBS2 = -lXt 1288NEXTAW_INSTALL = install_normal install_gui_extra 1289NEXTAW_TARGETS = installglinks 1290NEXTAW_MAN_TARGETS = yes 1291NEXTAW_TESTTARGET = gui 1292NEXTAW_BUNDLE = 1293 1294### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1295# errors: ld: Undefined symbol 1296# _get_wmShellWidgetClass 1297# _get_applicationShellWidgetClass 1298# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1299# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1300#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1301# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1302# too: 1303#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1304 1305# PHOTON GUI 1306PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1307PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1308PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1309PHOTONGUI_IPATH = 1310PHOTONGUI_LIBS_DIR = 1311PHOTONGUI_LIBS1 = -lph -lphexlib 1312PHOTONGUI_LIBS2 = 1313PHOTONGUI_INSTALL = install_normal install_gui_extra 1314PHOTONGUI_TARGETS = installglinks 1315PHOTONGUI_MAN_TARGETS = yes 1316PHOTONGUI_TESTTARGET = gui 1317PHOTONGUI_BUNDLE = 1318 1319# CARBON GUI 1320CARBONGUI_SRC = gui.c gui_mac.c 1321CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1322CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1323 -Wall -Wno-unknown-pragmas \ 1324 -mdynamic-no-pic -pipe 1325CARBONGUI_IPATH = -I. -Iproto 1326CARBONGUI_LIBS_DIR = 1327CARBONGUI_LIBS1 = -framework Carbon 1328CARBONGUI_LIBS2 = 1329CARBONGUI_INSTALL = install_macosx 1330CARBONGUI_TARGETS = 1331CARBONGUI_MAN_TARGETS = 1332CARBONGUI_TESTTARGET = gui 1333CARBONGUI_BUNDLE = gui_bundle 1334APPDIR = $(VIMNAME).app 1335CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1336 1337# All GUI files 1338ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1339ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1340 1341# }}} 1342 1343### Command to create dependencies based on #include "..." 1344### prototype headers are ignored due to -DPROTO, system 1345### headers #include <...> are ignored if we use the -MM option, as 1346### e.g. provided by gcc-cpp. 1347### Include FEAT_GUI to get dependency on gui.h 1348### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1349CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1350 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1351 1352# flags for cproto 1353# This is for cproto 3 patchlevel 8 or below 1354# __inline, __attribute__ and __extension__ are not recognized by cproto 1355# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1356#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1357# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1358# -D__extension__= -D__restrict="" \ 1359# -D__gnuc_va_list=char -D__builtin_va_list=char 1360 1361# 1362# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1363# __inline and __attribute__ are now recognized by cproto 1364# -D"foo()=" is not supported by all compilers so do not use it 1365NO_ATTR= 1366# 1367# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1368# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1369# 1370# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1371PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1372 1373 1374################################################ 1375## no changes required below this line ## 1376################################################ 1377 1378SHELL = /bin/sh 1379 1380.SUFFIXES: 1381.SUFFIXES: .c .o .pro 1382 1383PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1384POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1385 1386ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(POST_DEFS) 1387 1388# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1389# with "-E". 1390OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1391 1392LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(TCL_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1393 1394LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1395 1396DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1397 1398# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1399# needed by racket. 1400ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1401ALL_LIBS = \ 1402 $(GUI_LIBS1) \ 1403 $(GUI_X_LIBS) \ 1404 $(GUI_LIBS2) \ 1405 $(X_PRE_LIBS) \ 1406 $(X_LIBS) \ 1407 $(X_EXTRA_LIBS) \ 1408 $(MZSCHEME_LIBS) \ 1409 $(LIBS) \ 1410 $(EXTRA_LIBS) \ 1411 $(LUA_LIBS) \ 1412 $(PERL_LIBS) \ 1413 $(PYTHON_LIBS) \ 1414 $(PYTHON3_LIBS) \ 1415 $(TCL_LIBS) \ 1416 $(RUBY_LIBS) \ 1417 $(PROFILE_LIBS) \ 1418 $(SANITIZER_LIBS) \ 1419 $(LEAK_LIBS) 1420 1421# abbreviations 1422DEST_BIN = $(DESTDIR)$(BINDIR) 1423DEST_VIM = $(DESTDIR)$(VIMLOC) 1424DEST_RT = $(DESTDIR)$(VIMRTLOC) 1425DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1426DEST_COL = $(DESTDIR)$(COLSUBLOC) 1427DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1428DEST_IND = $(DESTDIR)$(INDSUBLOC) 1429DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1430DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1431DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1432DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1433DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1434DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1435DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1436DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1437DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1438DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1439DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1440DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1441DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1442 1443# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1444# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1445# directory first. 1446# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1447DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1448DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1449DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1450DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1451DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1452DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1453DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1454DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1455DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1456DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1457DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1458DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1459DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1460 1461# BASIC_SRC: files that are always used 1462# GUI_SRC: extra GUI files for current configuration 1463# ALL_GUI_SRC: all GUI files for Unix 1464# 1465# SRC: files used for current configuration 1466# TAGS_SRC: source files used for make tags 1467# TAGS_INCL: include files used for make tags 1468# ALL_SRC: source files used for make depend and make lint 1469 1470TAGS_INCL = *.h 1471 1472BASIC_SRC = \ 1473 blowfish.c \ 1474 buffer.c \ 1475 charset.c \ 1476 crypt.c \ 1477 crypt_zip.c \ 1478 diff.c \ 1479 digraph.c \ 1480 edit.c \ 1481 eval.c \ 1482 ex_cmds.c \ 1483 ex_cmds2.c \ 1484 ex_docmd.c \ 1485 ex_eval.c \ 1486 ex_getln.c \ 1487 fileio.c \ 1488 fold.c \ 1489 getchar.c \ 1490 hardcopy.c \ 1491 hashtab.c \ 1492 if_cscope.c \ 1493 if_xcmdsrv.c \ 1494 json.c \ 1495 main.c \ 1496 mark.c \ 1497 memfile.c \ 1498 memline.c \ 1499 menu.c \ 1500 message.c \ 1501 misc1.c \ 1502 misc2.c \ 1503 move.c \ 1504 mbyte.c \ 1505 normal.c \ 1506 ops.c \ 1507 option.c \ 1508 os_unix.c \ 1509 auto/pathdef.c \ 1510 popupmnu.c \ 1511 quickfix.c \ 1512 regexp.c \ 1513 screen.c \ 1514 search.c \ 1515 sha256.c \ 1516 spell.c \ 1517 syntax.c \ 1518 tag.c \ 1519 term.c \ 1520 ui.c \ 1521 undo.c \ 1522 version.c \ 1523 window.c \ 1524 $(OS_EXTRA_SRC) 1525 1526SRC = $(BASIC_SRC) \ 1527 $(GUI_SRC) \ 1528 $(HANGULIN_SRC) \ 1529 $(LUA_SRC) \ 1530 $(MZSCHEME_SRC) \ 1531 $(PERL_SRC) \ 1532 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1533 $(TCL_SRC) \ 1534 $(RUBY_SRC) \ 1535 $(SNIFF_SRC) \ 1536 $(WORKSHOP_SRC) \ 1537 $(WSDEBUG_SRC) 1538 1539TAGS_SRC = *.c *.cpp if_perl.xs 1540 1541EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1542 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1543 gui_beval.c workshop.c wsdebug.c integration.c \ 1544 netbeans.c channel.c \ 1545 $(GRESOURCE_SRC) 1546 1547# Unittest files 1548MEMFILE_TEST_SRC = memfile_test.c 1549MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1550 1551UNITTEST_SRC = $(MEMFILE_TEST_SRC) 1552UNITTEST_TARGETS = $(MEMFILE_TEST_TARGET) 1553 1554# All sources, also the ones that are not configured 1555ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) $(EXTRA_SRC) 1556 1557# Which files to check with lint. Select one of these three lines. ALL_SRC 1558# checks more, but may not work well for checking a GUI that wasn't configured. 1559# The perl sources also don't work well with lint. 1560LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1561 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1562 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) \ 1563 $(NETBEANS_SRC) $(CHANNEL_SRC) 1564#LINT_SRC = $(SRC) 1565#LINT_SRC = $(ALL_SRC) 1566#LINT_SRC = $(BASIC_SRC) 1567 1568OBJ_COMMON = \ 1569 objects/buffer.o \ 1570 objects/blowfish.o \ 1571 objects/charset.o \ 1572 objects/crypt.o \ 1573 objects/crypt_zip.o \ 1574 objects/diff.o \ 1575 objects/digraph.o \ 1576 objects/edit.o \ 1577 objects/eval.o \ 1578 objects/ex_cmds.o \ 1579 objects/ex_cmds2.o \ 1580 objects/ex_docmd.o \ 1581 objects/ex_eval.o \ 1582 objects/ex_getln.o \ 1583 objects/fileio.o \ 1584 objects/fold.o \ 1585 objects/getchar.o \ 1586 objects/hardcopy.o \ 1587 objects/hashtab.o \ 1588 $(HANGULIN_OBJ) \ 1589 objects/if_cscope.o \ 1590 objects/if_xcmdsrv.o \ 1591 objects/json.o \ 1592 objects/mark.o \ 1593 objects/memline.o \ 1594 objects/menu.o \ 1595 objects/message.o \ 1596 objects/misc1.o \ 1597 objects/misc2.o \ 1598 objects/move.o \ 1599 objects/mbyte.o \ 1600 objects/normal.o \ 1601 objects/ops.o \ 1602 objects/option.o \ 1603 objects/os_unix.o \ 1604 objects/pathdef.o \ 1605 objects/popupmnu.o \ 1606 objects/quickfix.o \ 1607 objects/regexp.o \ 1608 objects/screen.o \ 1609 objects/search.o \ 1610 objects/sha256.o \ 1611 objects/spell.o \ 1612 objects/syntax.o \ 1613 $(SNIFF_OBJ) \ 1614 objects/tag.o \ 1615 objects/term.o \ 1616 objects/ui.o \ 1617 objects/undo.o \ 1618 objects/version.o \ 1619 objects/window.o \ 1620 $(GUI_OBJ) \ 1621 $(LUA_OBJ) \ 1622 $(MZSCHEME_OBJ) \ 1623 $(PERL_OBJ) \ 1624 $(PYTHON_OBJ) \ 1625 $(PYTHON3_OBJ) \ 1626 $(TCL_OBJ) \ 1627 $(RUBY_OBJ) \ 1628 $(OS_EXTRA_OBJ) \ 1629 $(WORKSHOP_OBJ) \ 1630 $(NETBEANS_OBJ) \ 1631 $(CHANNEL_OBJ) \ 1632 $(WSDEBUG_OBJ) 1633 1634OBJ = $(OBJ_COMMON) \ 1635 objects/main.o \ 1636 objects/memfile.o 1637 1638MEMFILE_TEST_OBJ = $(OBJ_COMMON) \ 1639 objects/memfile_test.o 1640 1641PRO_AUTO = \ 1642 blowfish.pro \ 1643 buffer.pro \ 1644 charset.pro \ 1645 crypt.pro \ 1646 crypt_zip.pro \ 1647 diff.pro \ 1648 digraph.pro \ 1649 edit.pro \ 1650 eval.pro \ 1651 ex_cmds.pro \ 1652 ex_cmds2.pro \ 1653 ex_docmd.pro \ 1654 ex_eval.pro \ 1655 ex_getln.pro \ 1656 fileio.pro \ 1657 fold.pro \ 1658 getchar.pro \ 1659 hardcopy.pro \ 1660 hashtab.pro \ 1661 hangulin.pro \ 1662 if_cscope.pro \ 1663 if_lua.pro \ 1664 if_mzsch.pro \ 1665 if_python.pro \ 1666 if_python3.pro \ 1667 if_ruby.pro \ 1668 if_xcmdsrv.pro \ 1669 json.pro \ 1670 main.pro \ 1671 mark.pro \ 1672 mbyte.pro \ 1673 memfile.pro \ 1674 memline.pro \ 1675 menu.pro \ 1676 message.pro \ 1677 misc1.pro \ 1678 misc2.pro \ 1679 move.pro \ 1680 normal.pro \ 1681 ops.pro \ 1682 option.pro \ 1683 os_mac_conv.pro \ 1684 os_unix.pro \ 1685 popupmnu.pro \ 1686 pty.pro \ 1687 quickfix.pro \ 1688 regexp.pro \ 1689 screen.pro \ 1690 search.pro \ 1691 sha256.pro \ 1692 spell.pro \ 1693 syntax.pro \ 1694 tag.pro \ 1695 term.pro \ 1696 termlib.pro \ 1697 ui.pro \ 1698 undo.pro \ 1699 version.pro \ 1700 window.pro \ 1701 gui_beval.pro \ 1702 workshop.pro \ 1703 netbeans.pro \ 1704 channel.pro \ 1705 $(ALL_GUI_PRO) \ 1706 $(TCL_PRO) 1707 1708# Resources used for the Mac are in one directory. 1709RSRC_DIR = os_mac_rsrc 1710 1711PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1712 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1713 1714# Default target is making the executable and tools 1715all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1716 1717tools: $(TOOLS) 1718 1719# Run configure with all the setting from above. 1720# 1721# Note: auto/config.h doesn't depend on configure, because running configure 1722# doesn't always update auto/config.h. The timestamp isn't changed if the 1723# file contents didn't change (to avoid recompiling everything). Including a 1724# dependency on auto/config.h would cause running configure each time when 1725# auto/config.h isn't updated. The dependency on auto/config.mk should make 1726# sure configure is run when it's needed. 1727# 1728# Remove the config.cache every time, once in a while it causes problems that 1729# are very hard to figure out. 1730# 1731config auto/config.mk: auto/configure config.mk.in config.h.in 1732 -rm -f auto/config.cache 1733 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1734 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1735 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1736 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1737 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1738 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1739 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1740 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1741 $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1742 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1743 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1744 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1745 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1746 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1747 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1748 $(CONF_OPT_CHANNEL) \ 1749 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1750 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1751 $(CONF_OPT_SYSMOUSE); \ 1752 fi 1753 1754# Use "make reconfig" to rerun configure without cached values. 1755# When config.h changes, most things will be recompiled automatically. 1756# Invoke $(MAKE) to run config with the empty auto/config.mk. 1757# Invoke $(MAKE) to build all with the filled auto/config.mk. 1758reconfig: scratch clean 1759 $(MAKE) -f Makefile config 1760 $(MAKE) -f Makefile all 1761 1762# Run autoconf to produce auto/configure. 1763# Note: 1764# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1765# producing auto/configure. 1766# - autoconf is not run automatically, because a patch usually changes both 1767# configure.in and auto/configure but can't update the timestamps. People 1768# who do not have (the correct version of) autoconf would run into trouble. 1769# 1770# Two tricks are required to make autoconf put its output in the "auto" dir: 1771# - Temporarily move the ./configure script to ./configure.save. Don't 1772# overwrite it, it's probably the result of an aborted autoconf. 1773# - Use sed to change ./config.log to auto/config.log in the configure script. 1774# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1775# care of: 1776# - configure.lineno: has the line numbers replaced with $LINENO. That 1777# improves patches a LOT, thus use it instead (until someone says it doesn't 1778# work on some system). 1779# - autom4te.cache directory is created and not cleaned up. Delete it. 1780# - Uses ">config.log" instead of "./config.log". 1781autoconf: 1782 if test ! -f configure.save; then mv configure configure.save; fi 1783 $(AUTOCONF) 1784 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1785 chmod 755 auto/configure 1786 mv -f configure.save configure 1787 -rm -rf autom4te.cache 1788 -rm -f auto/config.status auto/config.cache 1789 1790# Re-execute this Makefile to include the new auto/config.mk produced by 1791# configure Only used when typing "make" with a fresh auto/config.mk. 1792myself: 1793 $(MAKE) -f Makefile all 1794 1795 1796# The normal command to compile a .c file to its .o file. 1797CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1798 1799 1800# Link the target for normal use or debugging. 1801# A shell script is used to try linking without unnecessary libraries. 1802$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1803 $(CCC) version.c -o objects/version.o 1804 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1805 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1806 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1807 sh $(srcdir)/link.sh 1808 1809xxd/xxd$(EXEEXT): xxd/xxd.c 1810 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1811 $(MAKE) -f Makefile 1812 1813# Build the language specific files if they were unpacked. 1814# Generate the converted .mo files separately, it's no problem if this fails. 1815languages: 1816 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1817 cd $(PODIR); \ 1818 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1819 fi 1820 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1821 cd $(PODIR); \ 1822 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1823 fi 1824 1825# Update the *.po files for changes in the sources. Only run manually. 1826update-po: 1827 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1828 1829# Generate function prototypes. This is not needed to compile vim, but if 1830# you want to use it, cproto is out there on the net somewhere -- Webb 1831# 1832# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1833# few include files that can not be found, that's OK. 1834 1835proto: $(PRO_AUTO) $(PRO_MANUAL) 1836 1837# Filter out arguments that cproto doesn't support. 1838# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 1839# them as a list of individual flags. 1840# The -E"gcc -E" argument must be separate to avoid problems with shell 1841# quoting. 1842CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1843 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g'` 1844 1845### Would be nice if this would work for "normal" make. 1846### Currently it only works for (Free)BSD make. 1847#$(PRO_AUTO): $$(*F).c 1848# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1849 1850# Always define FEAT_GUI. This may generate a few warnings if it's also 1851# defined in auto/config.h, you can ignore that. 1852.c.pro: 1853 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1854 echo "/* vim: set ft=c : */" >> proto/$@ 1855 1856os_amiga.pro: os_amiga.c 1857 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1858 echo "/* vim: set ft=c : */" >> proto/$@ 1859 1860os_msdos.pro: os_msdos.c 1861 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1862 echo "/* vim: set ft=c : */" >> proto/$@ 1863 1864os_win16.pro: os_win16.c 1865 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1866 echo "/* vim: set ft=c : */" >> proto/$@ 1867 1868os_win32.pro: os_win32.c 1869 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1870 echo "/* vim: set ft=c : */" >> proto/$@ 1871 1872os_mswin.pro: os_mswin.c 1873 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1874 echo "/* vim: set ft=c : */" >> proto/$@ 1875 1876winclip.pro: winclip.c 1877 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1878 echo "/* vim: set ft=c : */" >> proto/$@ 1879 1880os_beos.pro: os_beos.c 1881 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1882 echo "/* vim: set ft=c : */" >> proto/$@ 1883 1884os_vms.pro: os_vms.c 1885# must use os_vms_conf.h for auto/config.h 1886 mv auto/config.h auto/config.h.save 1887 cp os_vms_conf.h auto/config.h 1888 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1889 echo "/* vim: set ft=c : */" >> proto/$@ 1890 rm auto/config.h 1891 mv auto/config.h.save auto/config.h 1892 1893# if_perl.pro is special: Use the generated if_perl.c for input and remove 1894# prototypes for local functions. 1895if_perl.pro: auto/if_perl.c 1896 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1897 1898gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 1899 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1900 echo "/* vim: set ft=c : */" >> proto/$@ 1901 1902notags: 1903 -rm -f tags 1904 1905# Note: tags is made for the currently configured version, can't include both 1906# Motif and Athena GUI 1907# You can ignore error messages for missing files. 1908tags TAGS: notags 1909 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1910 1911# Make a highlight file for types. Requires Exuberant ctags and awk 1912types: types.vim 1913types.vim: $(TAGS_SRC) $(TAGS_INCL) 1914 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1915 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1916 {printf("%s ", $$1)}END{print ""}' > $@ 1917 1918# Execute the test scripts. Run these after compiling Vim, before installing. 1919# This doesn't depend on $(VIMTARGET), because that won't work when configure 1920# wasn't run yet. Restart make to build it instead. 1921# 1922# This will produce a lot of garbage on your screen, including a few error 1923# messages. Don't worry about that. 1924# If there is a real error, there will be a difference between "testXX.out" and 1925# a "testXX.ok" file. 1926# If everything is alright, the final message will be "ALL DONE". If not you 1927# get "TEST FAILURE". 1928# 1929test check: 1930 $(MAKE) -f Makefile $(VIMTARGET) 1931 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1932 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1933 fi 1934 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1935 ln -s $(VIMTARGET) vim; \ 1936 fi 1937 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 1938 $(MAKE) -f Makefile unittest 1939 1940benchmark: 1941 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 1942 1943unittesttargets: 1944 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 1945 1946unittest unittests: $(UNITTEST_TARGETS) 1947 @for t in $(UNITTEST_TARGETS); do \ 1948 ./$$t || exit 1; echo $$t passed; \ 1949 done 1950 1951# Run individual OLD style test, assuming that Vim was already compiled. 1952test1 \ 1953 test_autocmd_option \ 1954 test_autoformat_join \ 1955 test_breakindent \ 1956 test_changelist \ 1957 test_charsearch \ 1958 test_close_count \ 1959 test_command_count \ 1960 test_comparators \ 1961 test_erasebackword \ 1962 test_eval \ 1963 test_fixeol \ 1964 test_getcwd \ 1965 test_insertcount \ 1966 test_listchars \ 1967 test_listlbr \ 1968 test_listlbr_utf8 \ 1969 test_mapping \ 1970 test_marks \ 1971 test_match_conceal \ 1972 test_nested_function \ 1973 test_options \ 1974 test_qf_title \ 1975 test_ruby \ 1976 test_search_mbyte \ 1977 test_signs \ 1978 test_tagcase \ 1979 test_textobjects \ 1980 test_utf8 \ 1981 test_wordcount \ 1982 test_writefile \ 1983 test2 test3 test4 test5 test6 test7 test8 test9 \ 1984 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 \ 1985 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29 \ 1986 test30 test31 test32 test33 test34 test35 test36 test37 test38 test39 \ 1987 test40 test41 test42 test43 test44 test45 test46 test47 test48 test49 \ 1988 test50 test51 test52 test53 test54 test55 test56 test57 test58 test59 \ 1989 test60 test61 test62 test63 test64 test65 test66 test67 test68 test69 \ 1990 test70 test71 test72 test73 test74 test75 test76 test77 test78 test79 \ 1991 test80 test81 test82 test83 test84 test85 test86 test87 test88 test89 \ 1992 test90 test91 test92 test93 test94 test95 test96 test97 test98 test99 \ 1993 test100 test101 test102 test103 test104 test105 test106 test107 test108: 1994 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 1995 1996# Run individual NEW style test, assuming that Vim was already compiled. 1997test_arglist \ 1998 test_assert \ 1999 test_backspace_opt \ 2000 test_cdo \ 2001 test_cursor_func \ 2002 test_delete \ 2003 test_expand \ 2004 test_glob2regpat \ 2005 test_hardcopy \ 2006 test_increment \ 2007 test_json \ 2008 test_langmap \ 2009 test_lispwords \ 2010 test_menu \ 2011 test_perl \ 2012 test_quickfix \ 2013 test_searchpos \ 2014 test_set \ 2015 test_sort \ 2016 test_syntax \ 2017 test_undolevels \ 2018 test_unlet \ 2019 test_viminfo \ 2020 test_viml \ 2021 test_alot: 2022 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile $@.res VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2023 @if test -f testdir/test.log; then \ 2024 cat testdir/test.log; \ 2025 fi 2026 cat testdir/messages 2027 2028newtests: 2029 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2030 @if test -f testdir/test.log; then \ 2031 cat testdir/test.log; \ 2032 fi 2033 cat testdir/messages 2034 2035testclean: 2036 cd testdir; $(MAKE) -f Makefile clean 2037 if test -d $(PODIR); then \ 2038 cd $(PODIR); $(MAKE) checkclean; \ 2039 fi 2040 2041# Unittests 2042# It's build just like Vim to satisfy all dependencies. 2043$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2044 $(CCC) version.c -o objects/version.o 2045 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2046 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2047 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2048 sh $(srcdir)/link.sh 2049 2050# install targets 2051 2052install: $(GUI_INSTALL) 2053 2054install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2055 2056install_gui_extra: installgtutorbin 2057 2058installvim: installvimbin installtutorbin \ 2059 installruntime installlinks installmanlinks 2060 2061# 2062# Avoid overwriting an existing executable, somebody might be running it and 2063# overwriting it could cause it to crash. Deleting it is OK, it won't be 2064# really deleted until all running processes for it have exited. It is 2065# renamed first, in case the deleting doesn't work. 2066# 2067# If you want to keep an older version, rename it before running "make 2068# install". 2069# 2070installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2071 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2072 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2073 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2074 fi 2075 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2076 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2077 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2078# may create a link to the new executable from /usr/bin/vi 2079 -$(LINKIT) 2080 2081# Long list of arguments for the shell script that installs the manual pages 2082# for one language. 2083INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2084 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2085 2086# Install most of the runtime files 2087installruntime: installrtbase installmacros installtutor installspell 2088 2089# install the help files; first adjust the contents for the final location 2090installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2091 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2092 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 2093 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2094 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2095 @echo generating help tags 2096# Generate the help tags with ":helptags" to handle all languages. 2097 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 2098 cd $(HELPSOURCE); \ 2099 files=`ls *.txt tags`; \ 2100 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2101 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2102 cd $(DEST_HELP); \ 2103 chmod $(HELPMOD) $$files 2104 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2105 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2106# install the menu files 2107 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2108 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2109 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2110 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2111 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2112 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2113# install the evim file 2114 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2115 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2116 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2117 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2118# install the bugreport file 2119 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2120 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2121# install the example vimrc files 2122 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2123 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2124 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2125 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2126# install the file type detection files 2127 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2128 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2129 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2130 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2131 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2132 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2133 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2134 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2135 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2136 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2137 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2138 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2139 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2140 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2141 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2142 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2143# install the print resource files 2144 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2145 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2146# install the colorscheme files 2147 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 2148 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 2149# install the syntax files 2150 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2151 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2152# install the indent files 2153 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2154 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2155# install the standard autoload files 2156 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2157 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2158 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2159 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2160# install the standard plugin files 2161 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2162 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2163# install the ftplugin files 2164 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2165 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2166# install the compiler files 2167 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2168 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2169 2170installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2171 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2172 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2173 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2174 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2175# When using CVS some CVS directories might have been copied. 2176# Also delete AAPDIR and *.info files. 2177 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2178 if test -n "$$cvs"; then \ 2179 rm -rf $$cvs; \ 2180 fi 2181 2182# install the tutor files 2183installtutorbin: $(DEST_VIM) 2184 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2185 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2186 2187installgtutorbin: $(DEST_VIM) 2188 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2189 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2190 2191installtutor: $(DEST_RT) $(DEST_TUTOR) 2192 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2193 -rm -f $(DEST_TUTOR)/*.info 2194 chmod $(HELPMOD) $(DEST_TUTOR)/* 2195 2196# Install the spell files, if they exist. This assumes at least the English 2197# spell file is there. 2198installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2199 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2200 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2201 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2202 fi 2203 2204# install helper program xxd 2205installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2206 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2207 $(INSTALL_TOOL_LANGS) 2208 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2209 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2210 rm -f $(DEST_BIN)/xxd.rm; \ 2211 fi 2212 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2213 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2214 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2215 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2216 2217# install the runtime tools 2218 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2219# When using CVS some CVS directories might have been copied. 2220 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2221 if test -n "$$cvs"; then \ 2222 rm -rf $$cvs; \ 2223 fi 2224 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2225# replace the path in some tools 2226 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2227 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2228 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2229 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2230 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2231 2232# install the language specific files for tools, if they were unpacked 2233install-tool-languages: 2234 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2235 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2236 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2237 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2238 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2239 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2240 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2241 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2242 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2243 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2244 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2245 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2246 2247# install the language specific files, if they were unpacked 2248install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2249 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2250 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2251 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2252 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2253 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2254 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2255 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2256 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2257 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2258 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2259 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2260 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2261 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2262 $(DEST_MAN_FR) $(INSTALLMLARGS) 2263 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2264 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2265 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2266 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2267 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2268 $(DEST_MAN_IT) $(INSTALLMLARGS) 2269 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2270 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2271 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2272 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2273 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2274 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2275 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2276 $(DEST_MAN_PL) $(INSTALLMLARGS) 2277 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2278 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2279 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2280 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2281 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2282 $(DEST_MAN_RU) $(INSTALLMLARGS) 2283 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2284 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2285 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2286 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2287 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2288 fi 2289 if test -d $(LANGSOURCE); then \ 2290 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2291 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2292 fi 2293 if test -d $(KMAPSOURCE); then \ 2294 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2295 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2296 fi 2297 2298# install the icons for KDE, if the directory exists and the icon doesn't. 2299ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2300ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2301ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2302DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2303KDEPATH = $(HOME)/.kde/share/icons 2304install-icons: 2305 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2306 -a ! -f $(ICON48PATH)/gvim.png; then \ 2307 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2308 fi 2309 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2310 -a ! -f $(ICON32PATH)/gvim.png; then \ 2311 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2312 fi 2313 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2314 -a ! -f $(ICON16PATH)/gvim.png; then \ 2315 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2316 fi 2317 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2318 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2319 $(SCRIPTSOURCE)/gvim.desktop \ 2320 $(DESKTOPPATH); \ 2321 fi 2322 2323$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2324 @echo Runtime files not found. 2325 @echo You need to unpack the runtime archive before running "make install". 2326 test -f error 2327 2328$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2329 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2330 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2331 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2332 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2333 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2334 -$(SHELL) ./mkinstalldirs $@ 2335 -chmod $(DIRMOD) $@ 2336 2337# create links from various names to vim. This is only done when the links 2338# (or executables with the same name) don't exist yet. 2339installlinks: $(GUI_TARGETS) \ 2340 $(DEST_BIN)/$(EXTARGET) \ 2341 $(DEST_BIN)/$(VIEWTARGET) \ 2342 $(DEST_BIN)/$(RVIMTARGET) \ 2343 $(DEST_BIN)/$(RVIEWTARGET) \ 2344 $(INSTALLVIMDIFF) 2345 2346installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2347 $(DEST_BIN)/$(GVIEWTARGET) \ 2348 $(DEST_BIN)/$(RGVIMTARGET) \ 2349 $(DEST_BIN)/$(RGVIEWTARGET) \ 2350 $(DEST_BIN)/$(EVIMTARGET) \ 2351 $(DEST_BIN)/$(EVIEWTARGET) \ 2352 $(INSTALLGVIMDIFF) 2353 2354installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2355installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2356 2357$(DEST_BIN)/$(EXTARGET): 2358 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2359 2360$(DEST_BIN)/$(VIEWTARGET): 2361 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2362 2363$(DEST_BIN)/$(GVIMTARGET): 2364 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2365 2366$(DEST_BIN)/$(GVIEWTARGET): 2367 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2368 2369$(DEST_BIN)/$(RVIMTARGET): 2370 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2371 2372$(DEST_BIN)/$(RVIEWTARGET): 2373 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2374 2375$(DEST_BIN)/$(RGVIMTARGET): 2376 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2377 2378$(DEST_BIN)/$(RGVIEWTARGET): 2379 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2380 2381$(DEST_BIN)/$(VIMDIFFTARGET): 2382 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2383 2384$(DEST_BIN)/$(GVIMDIFFTARGET): 2385 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2386 2387$(DEST_BIN)/$(EVIMTARGET): 2388 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2389 2390$(DEST_BIN)/$(EVIEWTARGET): 2391 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2392 2393# Create links for the manual pages with various names to vim. This is only 2394# done when the links (or manpages with the same name) don't exist yet. 2395 2396INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2397 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2398 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2399 $(GVIMDIFFNAME) $(EVIEWNAME) 2400 2401installmanlinks: 2402 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2403 $(DEST_MAN) $(INSTALLMLARGS) 2404 2405uninstall: uninstall_runtime 2406 -rm -f $(DEST_BIN)/$(VIMTARGET) 2407 -rm -f $(DEST_BIN)/vimtutor 2408 -rm -f $(DEST_BIN)/gvimtutor 2409 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2410 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2411 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2412 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2413 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2414 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2415 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2416 2417# Note: the "rmdir" will fail if any files were added after "make install" 2418uninstall_runtime: 2419 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2420 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2421 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2422 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2423 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2424 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2425 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2426 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2427 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2428 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2429 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2430 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2431 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2432 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2433 $(DEST_MAN) $(INSTALLMLARGS) 2434 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2435 $(DEST_MAN_FR) $(INSTALLMLARGS) 2436 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2437 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2438 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2439 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2440 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2441 $(DEST_MAN_IT) $(INSTALLMLARGS) 2442 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2443 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2444 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2445 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2446 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2447 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2448 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2449 $(DEST_MAN_PL) $(INSTALLMLARGS) 2450 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2451 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2452 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2453 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2454 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2455 $(DEST_MAN_RU) $(INSTALLMLARGS) 2456 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2457 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2458 -rm -f $(DEST_MAN)/xxd.1 2459 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2460 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2461 -rm -f $(DEST_MAN_JA_U)/xxd.1 2462 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2463 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2464 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2465 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2466 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2467 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2468 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2469 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2470 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2471 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2472 -rm -f $(SYS_OPTWIN_FILE) 2473 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2474 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2475 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2476 -rm -rf $(DEST_MACRO) 2477 -rm -rf $(DEST_TUTOR) 2478 -rm -rf $(DEST_SPELL) 2479 -rm -rf $(DEST_TOOLS) 2480 -rm -rf $(DEST_LANG) 2481 -rm -rf $(DEST_KMAP) 2482 -rm -rf $(DEST_COMP) 2483 -rm -f $(DEST_PRINT)/*.ps 2484 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2485 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2486 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2487 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2488 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2489# This will fail when other Vim versions are installed, no worries. 2490 -rmdir $(DEST_VIM) 2491 2492# Clean up all the files that have been produced, except configure's. 2493# We support common typing mistakes for Juergen! :-) 2494clean celan: testclean 2495 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2496 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2497 -rm -f conftest* *~ auto/link.sed 2498 -rm -f $(UNITTEST_TARGETS) 2499 -rm -f runtime pixmaps 2500 -rm -rf $(APPDIR) 2501 -rm -rf mzscheme_base.c 2502 if test -d $(PODIR); then \ 2503 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2504 fi 2505 2506# Make a shadow directory for compilation on another system or with different 2507# features. 2508SHADOWDIR = shadow 2509 2510shadow: runtime pixmaps 2511 mkdir $(SHADOWDIR) 2512 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../vimtutor ../gvimtutor ../mkinstalldirs . 2513 mkdir $(SHADOWDIR)/auto 2514 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2515 mkdir $(SHADOWDIR)/po 2516 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/Makefile . 2517 cd $(SHADOWDIR); rm -f auto/link.sed 2518 cp Makefile configure $(SHADOWDIR) 2519 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2520 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2521 cp config.mk.dist $(SHADOWDIR) 2522 mkdir $(SHADOWDIR)/xxd 2523 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2524 if test -d $(RSRC_DIR); then \ 2525 cd $(SHADOWDIR); \ 2526 ln -s ../infplist.xml .; \ 2527 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2528 fi 2529 mkdir $(SHADOWDIR)/testdir 2530 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2531 ../../testdir/Make_all.mak \ 2532 ../../testdir/*.in \ 2533 ../../testdir/*.vim \ 2534 ../../testdir/python* \ 2535 ../../testdir/sautest \ 2536 ../../testdir/test83-tags? \ 2537 ../../testdir/*.ok . 2538 2539# Link needed for doing "make install" in a shadow directory. 2540runtime: 2541 -ln -s ../runtime . 2542 2543# Link needed for doing "make" using GTK in a shadow directory. 2544pixmaps: 2545 -ln -s ../pixmaps . 2546 2547# Update the synmenu.vim file with the latest Syntax menu. 2548# This is only needed when runtime/makemenu.vim was changed. 2549menu: ./vim ../runtime/makemenu.vim 2550 ./vim -u ../runtime/makemenu.vim 2551 2552# Start configure from scratch 2553scrub scratch: 2554 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2555 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2556 touch auto/config.h 2557 cp config.mk.dist auto/config.mk 2558 2559distclean: clean scratch 2560 -rm -f tags 2561 2562dist: distclean 2563 @echo 2564 @echo Making the distribution has to be done in the top directory 2565 2566mdepend: 2567 -@rm -f Makefile~ 2568 cp Makefile Makefile~ 2569 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2570 @for i in $(ALL_SRC) ; do \ 2571 echo "$$i" ; \ 2572 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2573 $(CPP) $$i |\ 2574 grep '^# .*"\./.*\.h"' |\ 2575 sort -t'"' -u +1 -2 |\ 2576 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2577 ` >> tmp_make ; \ 2578 done 2579 mv tmp_make Makefile 2580 2581depend: 2582 -@rm -f Makefile~ 2583 cp Makefile Makefile~ 2584 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2585 -for i in $(ALL_SRC); do echo $$i; \ 2586 $(CPP_DEPEND) $$i | \ 2587 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2588 mv tmp_make Makefile 2589 2590# Run lint. Clean up the *.ln files that are sometimes left behind. 2591lint: 2592 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2593 -rm -f *.ln 2594 2595# Check dosinst.c with lint. 2596lintinstall: 2597 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2598 -rm -f dosinst.ln 2599 2600########################################################################### 2601 2602.c.o: 2603 $(CCC) $< 2604 2605auto/if_perl.c: if_perl.xs 2606 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2607 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2608 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2609 2610auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2611 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2612 2613auto/pathdef.c: Makefile auto/config.mk 2614 -@echo creating $@ 2615 -@echo '/* pathdef.c */' > $@ 2616 -@echo '/* This file is automatically created by Makefile' >> $@ 2617 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2618 -@echo '#include "vim.h"' >> $@ 2619 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2620 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2621 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2622 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2623 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2624 -@if test -n "$(COMPILEDBY)"; then \ 2625 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2626 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2627 -@echo '";' >> $@ 2628 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2629 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2630 -@echo '";' >> $@ 2631 -@sh $(srcdir)/pathdef.sh 2632 2633GUI_GTK_RES_INPUTS = \ 2634 ../pixmaps/stock_vim_build_tags.png \ 2635 ../pixmaps/stock_vim_find_help.png \ 2636 ../pixmaps/stock_vim_save_all.png \ 2637 ../pixmaps/stock_vim_session_load.png \ 2638 ../pixmaps/stock_vim_session_new.png \ 2639 ../pixmaps/stock_vim_session_save.png \ 2640 ../pixmaps/stock_vim_shell.png \ 2641 ../pixmaps/stock_vim_window_maximize.png \ 2642 ../pixmaps/stock_vim_window_maximize_width.png \ 2643 ../pixmaps/stock_vim_window_minimize.png \ 2644 ../pixmaps/stock_vim_window_minimize_width.png \ 2645 ../pixmaps/stock_vim_window_split.png \ 2646 ../pixmaps/stock_vim_window_split_vertical.png 2647 2648auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2649 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2650auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2651 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2652 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2653 fi 2654 2655# All the object files are put in the "objects" directory. Since not all make 2656# commands understand putting object files in another directory, it must be 2657# specified for each file separately. 2658 2659objects: 2660 mkdir objects 2661 2662objects/blowfish.o: blowfish.c 2663 $(CCC) -o $@ blowfish.c 2664 2665objects/buffer.o: buffer.c 2666 $(CCC) -o $@ buffer.c 2667 2668objects/charset.o: charset.c 2669 $(CCC) -o $@ charset.c 2670 2671objects/crypt.o: crypt.c 2672 $(CCC) -o $@ crypt.c 2673 2674objects/crypt_zip.o: crypt_zip.c 2675 $(CCC) -o $@ crypt_zip.c 2676 2677objects/diff.o: diff.c 2678 $(CCC) -o $@ diff.c 2679 2680objects/digraph.o: digraph.c 2681 $(CCC) -o $@ digraph.c 2682 2683objects/edit.o: edit.c 2684 $(CCC) -o $@ edit.c 2685 2686objects/eval.o: eval.c 2687 $(CCC) -o $@ eval.c 2688 2689objects/ex_cmds.o: ex_cmds.c 2690 $(CCC) -o $@ ex_cmds.c 2691 2692objects/ex_cmds2.o: ex_cmds2.c 2693 $(CCC) -o $@ ex_cmds2.c 2694 2695objects/ex_docmd.o: ex_docmd.c 2696 $(CCC) -o $@ ex_docmd.c 2697 2698objects/ex_eval.o: ex_eval.c 2699 $(CCC) -o $@ ex_eval.c 2700 2701objects/ex_getln.o: ex_getln.c 2702 $(CCC) -o $@ ex_getln.c 2703 2704objects/fileio.o: fileio.c 2705 $(CCC) -o $@ fileio.c 2706 2707objects/fold.o: fold.c 2708 $(CCC) -o $@ fold.c 2709 2710objects/getchar.o: getchar.c 2711 $(CCC) -o $@ getchar.c 2712 2713objects/hardcopy.o: hardcopy.c 2714 $(CCC) -o $@ hardcopy.c 2715 2716objects/hashtab.o: hashtab.c 2717 $(CCC) -o $@ hashtab.c 2718 2719objects/gui.o: gui.c 2720 $(CCC) -o $@ gui.c 2721 2722objects/gui_at_fs.o: gui_at_fs.c 2723 $(CCC) -o $@ gui_at_fs.c 2724 2725objects/gui_at_sb.o: gui_at_sb.c 2726 $(CCC) -o $@ gui_at_sb.c 2727 2728objects/gui_athena.o: gui_athena.c 2729 $(CCC) -o $@ gui_athena.c 2730 2731objects/gui_beval.o: gui_beval.c 2732 $(CCC) -o $@ gui_beval.c 2733 2734objects/gui_gtk.o: gui_gtk.c 2735 $(CCC) -o $@ gui_gtk.c 2736 2737objects/gui_gtk_f.o: gui_gtk_f.c 2738 $(CCC) -o $@ gui_gtk_f.c 2739 2740objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 2741 $(CCC) $(PERL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 2742 2743objects/gui_gtk_x11.o: gui_gtk_x11.c 2744 $(CCC) -o $@ gui_gtk_x11.c 2745 2746objects/gui_motif.o: gui_motif.c 2747 $(CCC) -o $@ gui_motif.c 2748 2749objects/gui_xmdlg.o: gui_xmdlg.c 2750 $(CCC) -o $@ gui_xmdlg.c 2751 2752objects/gui_xmebw.o: gui_xmebw.c 2753 $(CCC) -o $@ gui_xmebw.c 2754 2755objects/gui_x11.o: gui_x11.c 2756 $(CCC) -o $@ gui_x11.c 2757 2758objects/gui_photon.o: gui_photon.c 2759 $(CCC) -o $@ gui_photon.c 2760 2761objects/gui_mac.o: gui_mac.c 2762 $(CCC) -o $@ gui_mac.c 2763 2764objects/hangulin.o: hangulin.c 2765 $(CCC) -o $@ hangulin.c 2766 2767objects/if_cscope.o: if_cscope.c 2768 $(CCC) -o $@ if_cscope.c 2769 2770objects/if_xcmdsrv.o: if_xcmdsrv.c 2771 $(CCC) -o $@ if_xcmdsrv.c 2772 2773objects/if_lua.o: if_lua.c 2774 $(CCC) $(LUA_CFLAGS) -o $@ if_lua.c 2775 2776objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2777 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2778 2779mzscheme_base.c: 2780 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2781 2782objects/if_perl.o: auto/if_perl.c 2783 $(CCC) $(PERL_CFLAGS) -o $@ auto/if_perl.c 2784 2785objects/if_perlsfio.o: if_perlsfio.c 2786 $(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c 2787 2788objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2789 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2790 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2791 $(PYTHON_GETPATH_CFLAGS) 2792 2793objects/if_python.o: if_python.c if_py_both.h 2794 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2795 2796objects/if_python3.o: if_python3.c if_py_both.h 2797 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2798 2799objects/if_ruby.o: if_ruby.c 2800 $(CCC) $(RUBY_CFLAGS) -o $@ if_ruby.c 2801 2802objects/if_sniff.o: if_sniff.c 2803 $(CCC) -o $@ if_sniff.c 2804 2805objects/if_tcl.o: if_tcl.c 2806 $(CCC) $(TCL_CFLAGS) -o $@ if_tcl.c 2807 2808objects/integration.o: integration.c 2809 $(CCC) -o $@ integration.c 2810 2811objects/json.o: json.c 2812 $(CCC) -o $@ json.c 2813 2814objects/main.o: main.c 2815 $(CCC) -o $@ main.c 2816 2817objects/mark.o: mark.c 2818 $(CCC) -o $@ mark.c 2819 2820objects/memfile.o: memfile.c 2821 $(CCC) -o $@ memfile.c 2822 2823objects/memfile_test.o: memfile_test.c 2824 $(CCC) -o $@ memfile_test.c 2825 2826objects/memline.o: memline.c 2827 $(CCC) -o $@ memline.c 2828 2829objects/menu.o: menu.c 2830 $(CCC) -o $@ menu.c 2831 2832objects/message.o: message.c 2833 $(CCC) -o $@ message.c 2834 2835objects/misc1.o: misc1.c 2836 $(CCC) -o $@ misc1.c 2837 2838objects/misc2.o: misc2.c 2839 $(CCC) -o $@ misc2.c 2840 2841objects/move.o: move.c 2842 $(CCC) -o $@ move.c 2843 2844objects/mbyte.o: mbyte.c 2845 $(CCC) -o $@ mbyte.c 2846 2847objects/normal.o: normal.c 2848 $(CCC) -o $@ normal.c 2849 2850objects/ops.o: ops.c 2851 $(CCC) -o $@ ops.c 2852 2853objects/option.o: option.c 2854 $(CCC) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) -o $@ option.c 2855 2856objects/os_beos.o: os_beos.c 2857 $(CCC) -o $@ os_beos.c 2858 2859objects/os_qnx.o: os_qnx.c 2860 $(CCC) -o $@ os_qnx.c 2861 2862objects/os_macosx.o: os_macosx.m 2863 $(CCC) -o $@ os_macosx.m 2864 2865objects/os_mac_conv.o: os_mac_conv.c 2866 $(CCC) -o $@ os_mac_conv.c 2867 2868objects/os_unix.o: os_unix.c 2869 $(CCC) -o $@ os_unix.c 2870 2871objects/os_mswin.o: os_mswin.c 2872 $(CCC) -o $@ os_mswin.c 2873 2874objects/winclip.o: winclip.c 2875 $(CCC) -o $@ winclip.c 2876 2877objects/pathdef.o: auto/pathdef.c 2878 $(CCC) -o $@ auto/pathdef.c 2879 2880objects/pty.o: pty.c 2881 $(CCC) -o $@ pty.c 2882 2883objects/popupmnu.o: popupmnu.c 2884 $(CCC) -o $@ popupmnu.c 2885 2886objects/quickfix.o: quickfix.c 2887 $(CCC) -o $@ quickfix.c 2888 2889objects/regexp.o: regexp.c regexp_nfa.c 2890 $(CCC) -o $@ regexp.c 2891 2892objects/screen.o: screen.c 2893 $(CCC) -o $@ screen.c 2894 2895objects/search.o: search.c 2896 $(CCC) -o $@ search.c 2897 2898objects/sha256.o: sha256.c 2899 $(CCC) -o $@ sha256.c 2900 2901objects/spell.o: spell.c 2902 $(CCC) -o $@ spell.c 2903 2904objects/syntax.o: syntax.c 2905 $(CCC) -o $@ syntax.c 2906 2907objects/tag.o: tag.c 2908 $(CCC) -o $@ tag.c 2909 2910objects/term.o: term.c 2911 $(CCC) -o $@ term.c 2912 2913objects/ui.o: ui.c 2914 $(CCC) -o $@ ui.c 2915 2916objects/undo.o: undo.c 2917 $(CCC) -o $@ undo.c 2918 2919objects/window.o: window.c 2920 $(CCC) -o $@ window.c 2921 2922objects/workshop.o: workshop.c 2923 $(CCC) -o $@ workshop.c 2924 2925objects/wsdebug.o: wsdebug.c 2926 $(CCC) -o $@ wsdebug.c 2927 2928objects/netbeans.o: netbeans.c 2929 $(CCC) -o $@ netbeans.c 2930 2931objects/channel.o: channel.c 2932 $(CCC) -o $@ channel.c 2933 2934Makefile: 2935 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2936 2937############################################################################### 2938### MacOS X installation 2939### 2940### This installs a runnable Vim.app in $(prefix) 2941 2942REZ = /Developer/Tools/Rez 2943RESDIR = $(APPDIR)/Contents/Resources 2944VERSION = $(VIMMAJOR).$(VIMMINOR) 2945 2946### Common flags 2947M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2948 -DAPP_VER=$(VERSION) 2949 2950install_macosx: gui_bundle 2951# Remove the link to the runtime dir, don't want to copy all of that. 2952 -rm $(RESDIR)/vim/runtime 2953 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2954# Generate the help tags file now, it won't work with "make installruntime". 2955 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2956# Install the runtime files. Recursive! 2957 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2958# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2959 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2960 VIMEXE=$$srcdir/$(VIMTARGET) \ 2961 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2962 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2963 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2964 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2965 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2966# Put the link back. 2967 ln -s `pwd`/../runtime $(RESDIR)/vim 2968# Copy rgb.txt, Mac doesn't always have X11 2969 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2970# TODO: Create the vimtutor and/or gvimtutor application. 2971 2972gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2973 bundle-language 2974 2975$(RESDIR): 2976 mkdir -p $@ 2977 2978bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2979# Make a link to the runtime directory, so that we can try out the executable 2980# without installing it. 2981 mkdir -p $(RESDIR)/vim 2982 -ln -s `pwd`/../runtime $(RESDIR)/vim 2983 2984bundle-executable: $(VIMTARGET) 2985 mkdir -p $(APPDIR)/Contents/MacOS 2986 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2987 2988bundle-info: bundle-dir 2989 @echo "Creating PkgInfo" 2990 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2991 @echo "Creating Info.plist" 2992 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2993 2994bundle-resource: bundle-dir bundle-rsrc 2995 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2996 2997### Classic resources 2998# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2999# This file is also required for OS X Vim. 3000bundle-rsrc: os_mac.rsr.hqx 3001 @echo "Creating resource fork" 3002 python dehqx.py $< 3003 rm -f gui_mac.rsrc 3004 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3005 3006# po/Make_osx.pl says something about generating a Mac message file 3007# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3008# *really* be upset that Carbon Vim was not localised in 3009# Ukrainian? 3010# 3011#bundle-language: bundle-dir po/Make_osx.pl 3012# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3013bundle-language: bundle-dir 3014 3015$(APPDIR)/Contents: 3016 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 3017 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 3018 3019 3020############################################################################### 3021### (automatically generated by 'make depend') 3022### Dependencies: 3023objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 3024 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3025 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3026 globals.h farsi.h arabic.h 3027objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3028 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3029 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3030 farsi.h arabic.h version.h 3031objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3032 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3033 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3034 farsi.h arabic.h 3035objects/crypt.o: crypt.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3036 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3037 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3038 farsi.h arabic.h 3039objects/crypt_zip.o: crypt_zip.c vim.h auto/config.h feature.h os_unix.h \ 3040 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3041 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3042 globals.h farsi.h arabic.h 3043objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3044 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3045 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3046 farsi.h arabic.h 3047objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3048 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3049 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3050 farsi.h arabic.h 3051objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3052 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3053 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3054 farsi.h arabic.h 3055objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3056 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3057 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3058 farsi.h arabic.h version.h 3059objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3060 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3061 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3062 farsi.h arabic.h version.h 3063objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 3064 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3065 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3066 globals.h farsi.h arabic.h version.h 3067objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 3068 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3069 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3070 globals.h farsi.h arabic.h 3071objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3072 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3073 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3074 farsi.h arabic.h 3075objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 3076 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3077 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3078 globals.h farsi.h arabic.h 3079objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3080 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3081 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3082 farsi.h arabic.h 3083objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3084 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3085 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3086 farsi.h arabic.h 3087objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3088 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3089 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3090 farsi.h arabic.h 3091objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 3092 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3093 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3094 globals.h farsi.h arabic.h version.h 3095objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3096 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3097 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3098 farsi.h arabic.h 3099objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 3100 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3101 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3102 globals.h farsi.h arabic.h if_cscope.h 3103objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 3104 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3105 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3106 globals.h farsi.h arabic.h version.h 3107objects/json.o: json.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3108 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3109 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3110 farsi.h arabic.h 3111objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3112 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3113 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3114 farsi.h arabic.h farsi.c arabic.c 3115objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3116 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3117 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3118 farsi.h arabic.h 3119objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3120 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3121 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3122 farsi.h arabic.h 3123objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3124 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3125 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3126 farsi.h arabic.h 3127objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3128 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3129 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3130 farsi.h arabic.h 3131objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3132 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3133 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3134 farsi.h arabic.h 3135objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3136 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3137 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3138 farsi.h arabic.h version.h 3139objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3140 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3141 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3142 farsi.h arabic.h 3143objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3144 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3145 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3146 farsi.h arabic.h 3147objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3148 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3149 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3150 farsi.h arabic.h 3151objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3152 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3153 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3154 farsi.h arabic.h 3155objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3156 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3157 proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h farsi.h arabic.h 3158objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3159 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3160 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3161 farsi.h arabic.h 3162objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3163 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3164 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3165 farsi.h arabic.h os_unixx.h 3166objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 3167 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3168 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3169 globals.h farsi.h arabic.h 3170objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 3171 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3172 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3173 globals.h farsi.h arabic.h 3174objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 3175 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3176 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3177 globals.h farsi.h arabic.h 3178objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3179 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3180 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3181 farsi.h arabic.h regexp_nfa.c 3182objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3183 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3184 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3185 farsi.h arabic.h 3186objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3187 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3188 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3189 farsi.h arabic.h 3190objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3191 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3192 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3193 farsi.h arabic.h 3194objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3195 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3196 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3197 farsi.h arabic.h 3198objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3199 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3200 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3201 farsi.h arabic.h 3202objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3203 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3204 proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h farsi.h arabic.h 3205objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3206 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3207 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3208 farsi.h arabic.h 3209objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3210 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3211 proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h farsi.h arabic.h 3212objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3213 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3214 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3215 farsi.h arabic.h 3216objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3217 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3218 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3219 farsi.h arabic.h version.h 3220objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3221 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3222 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3223 farsi.h arabic.h 3224objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3225 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3226 proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h farsi.h arabic.h 3227objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 3228 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3229 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3230 globals.h farsi.h arabic.h 3231objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 3232 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3233 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3234 globals.h farsi.h arabic.h gui_gtk_f.h 3235objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 3236 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3237 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3238 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3239 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3240 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3241 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3242 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3243 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3244 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3245 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3246 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3247 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3248 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3249 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3250 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3251 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3252 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3253 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3254 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3255 ../pixmaps/tb_minwidth.xpm 3256objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 3257 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3258 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3259 globals.h farsi.h arabic.h 3260objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 3261 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3262 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3263 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3264objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 3265 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3266 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3267 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3268 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3269 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3270 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3271 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3272 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3273 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3274 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3275 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3276 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3277 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3278 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3279 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3280 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3281 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3282 ../pixmaps/tb_minwidth.xpm 3283objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 3284 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3285 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3286 globals.h farsi.h arabic.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3287 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3288objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3289 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3290 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3291 farsi.h arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3292 ../runtime/vim48x48.xpm 3293objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3294 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3295 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3296 globals.h farsi.h arabic.h gui_at_sb.h 3297objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3298 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3299 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3300 globals.h farsi.h arabic.h gui_at_sb.h 3301objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3302 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3303 proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h farsi.h arabic.h 3304objects/memfile_test.o: memfile_test.c main.c vim.h auto/config.h feature.h \ 3305 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3306 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3307 ex_cmds.h proto.h globals.h farsi.h arabic.h farsi.c arabic.c memfile.c 3308objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3309 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3310 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3311 globals.h farsi.h arabic.h 3312objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3313 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3314 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3315 farsi.h arabic.h 3316objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3317 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3318 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3319 globals.h farsi.h arabic.h if_mzsch.h 3320objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3321 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3322 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3323 globals.h farsi.h arabic.h 3324objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3325 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3326 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3327 globals.h farsi.h arabic.h 3328objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3329 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3330 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3331 globals.h farsi.h arabic.h if_py_both.h 3332objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3333 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3334 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3335 globals.h farsi.h arabic.h if_py_both.h 3336objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3337 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3338 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3339 farsi.h arabic.h 3340objects/if_ruby.o: if_ruby.c auto/config.h vim.h feature.h os_unix.h auto/osdef.h \ 3341 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3342 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3343 farsi.h arabic.h version.h 3344objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3345 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3346 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3347 globals.h farsi.h arabic.h os_unixx.h 3348objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3349 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3350 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3351 globals.h farsi.h arabic.h 3352objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3353 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3354 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h \ 3355 ex_cmds.h proto.h globals.h farsi.h arabic.h version.h workshop.h 3356objects/wsdebug.o: wsdebug.c 3357objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3358 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3359 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3360 globals.h farsi.h arabic.h integration.h 3361objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3362 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3363 regexp.h gui.h gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h \ 3364 globals.h farsi.h arabic.h version.h 3365objects/channel.o: channel.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3366 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3367 gui_beval.h proto/gui_beval.pro alloc.h ex_cmds.h proto.h globals.h \ 3368 farsi.h arabic.h 3369objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3370
