1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 235# Sun cursus library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284######################## auto/config.mk ######################## {{{1 285# At this position auto/config.mk is included. When starting from the 286# distribution it is almost empty. After running auto/configure it contains 287# settings that have been discovered for your system. Settings below this 288# include override settings in auto/config.mk! 289 290# Note: if auto/config.mk is lost somehow (e.g., because configure was 291# interrupted), create an empty auto/config.mk file and do "make config". 292 293# (X) How to include auto/config.mk depends on the version of "make" you have, 294# if the current choice doesn't work, try the other one. 295 296include auto/config.mk 297#.include "auto/config.mk" 298CClink = $(CC) 299 300#}}} 301 302# Include the configuration choices first, so we can override everything 303# below. As shipped, this file contains a target that causes to run 304# configure. Once configure was run, this file contains a list of 305# make variables with predefined values instead. Thus any second invocation 306# of make, will build Vim. 307 308# CONFIGURE - configure arguments {{{1 309# You can give a lot of options to configure. 310# Change this to your desire and do 'make config' afterwards 311 312# examples (can only use one!): 313#CONF_ARGS = --exec-prefix=/usr 314#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 315#CONF_ARGS = --with-global-runtime=/etc/vim 316#CONF_ARGS = --with-local-dir=/usr/share 317#CONF_ARGS = --without-local-dir 318 319# Use this one if you distribute a modified version of Vim. 320#CONF_ARGS = --with-modified-by="John Doe" 321 322# GUI - For creating Vim with GUI (gvim) (B) 323# Uncomment this line when you don't want to get the GUI version, although you 324# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 325# at all. 326#CONF_OPT_GUI = --disable-gui 327 328# Uncomment one of these lines if you have that GUI but don't want to use it. 329# The automatic check will use another one that can be found. 330# Gnome is disabled by default, it may cause trouble. 331#CONF_OPT_GUI = --disable-gtk2-check 332#CONF_OPT_GUI = --enable-gnome2-check 333#CONF_OPT_GUI = --disable-motif-check 334#CONF_OPT_GUI = --disable-athena-check 335#CONF_OPT_GUI = --disable-nextaw-check 336 337# Uncomment one of these lines to select a specific GUI to use. 338# When using "yes" or nothing, configure will use the first one found: GTK+, 339# Motif or Athena. 340# 341# GTK versions that are known not to work 100% are rejected. 342# Use "--disable-gtktest" to accept them anyway. 343# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 344# 345# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 346# is used then GNOME will automatically be used if it is found. If you have 347# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 348# --enable-gui=gtk or leave out --enable-gnome-check. 349# 350# If the selected GUI isn't found, the GUI is disabled automatically 351#CONF_OPT_GUI = --enable-gui=gtk2 352#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 353#CONF_OPT_GUI = --enable-gui=gnome2 354#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 355#CONF_OPT_GUI = --enable-gui=motif 356#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 357#CONF_OPT_GUI = --enable-gui=athena 358#CONF_OPT_GUI = --enable-gui=nextaw 359 360# DARWIN - detecting Mac OS X 361# Uncomment this line when you want to compile a Unix version of Vim on 362# Darwin. None of the Mac specific options or files will be used. 363#CONF_OPT_DARWIN = --disable-darwin 364 365# Select the architecture supported. Default is to build for the current 366# platform. Use "both" for a universal binary. That probably doesn't work 367# when including Perl, Python, etc. 368#CONF_OPT_DARWIN = --with-mac-arch=i386 369#CONF_OPT_DARWIN = --with-mac-arch=ppc 370#CONF_OPT_DARWIN = --with-mac-arch=both 371 372# LUA 373# Uncomment one of these when you want to include the Lua interface. 374# First one is for static linking, second one for dynamic loading. 375#CONF_OPT_LUA = --enable-luainterp 376#CONF_OPT_LUA = --enable-luainterp=dynamic 377# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 378#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 379 380# MZSCHEME 381# Uncomment this when you want to include the MzScheme interface. 382#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 383# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 384#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 385#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 386#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 387 388# PERL 389# Uncomment one of these when you want to include the Perl interface. 390# First one is for static linking, second one for dynamic loading. 391# The Perl option sometimes causes problems, because it adds extra flags 392# 393# to the command line. If you see strange flags during compilation, check in 394# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 395# the next line. 396# When you get an error for a missing "perl.exp" file, try creating an emtpy 397# one: "touch perl.exp". 398# This requires at least "small" features, "tiny" doesn't work. 399#CONF_OPT_PERL = --enable-perlinterp 400#CONF_OPT_PERL = --enable-perlinterp=dynamic 401 402# PYTHON 403# Uncomment this when you want to include the Python interface. 404# NOTE: This may cause threading to be enabled, which has side effects (such 405# as using different libraries and debugging becomes more difficult). 406# NOTE: Using this together with Perl may cause a crash in initialization. 407# For Python3 support make a symbolic link in /usr/local/bin: 408# ln -s python3 python3.1 409# If both python2.x and python3.x are enabled then the linking will be via 410# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 411#CONF_OPT_PYTHON = --enable-pythoninterp 412#CONF_OPT_PYTHON3 = --enable-python3interp 413 414# RUBY 415# Uncomment this when you want to include the Ruby interface. 416# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 417#CONF_OPT_RUBY = --enable-rubyinterp 418#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 419 420# TCL 421# Uncomment this when you want to include the Tcl interface. 422#CONF_OPT_TCL = --enable-tclinterp 423#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 424 425# CSCOPE 426# Uncomment this when you want to include the Cscope interface. 427#CONF_OPT_CSCOPE = --enable-cscope 428 429# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 430#CONF_OPT_WORKSHOP = --enable-workshop 431 432# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 433# Motif version must have XPM libraries (see |workshop-xpm|). 434# Uncomment this when you do not want the netbeans interface. 435#CONF_OPT_NETBEANS = --disable-netbeans 436 437# SNIFF - Include support for SNiFF+. 438#CONF_OPT_SNIFF = --enable-sniff 439 440# MULTIBYTE - To edit multi-byte characters. 441# Uncomment this when you want to edit a multibyte language. 442# It's automatically enabled with big features or IME support. 443# Note: Compile on a machine where setlocale() actually works, otherwise the 444# configure tests may fail. 445#CONF_OPT_MULTIBYTE = --enable-multibyte 446 447# NLS - National Language Support 448# Uncomment this when you do not want to support translated messages, even 449# though configure can find support for it. 450#CONF_OPT_NLS = --disable-nls 451 452# XIM - X Input Method. Special character input support for X11 (Chinese, 453# Japanese, special symbols, etc). Also needed for dead-key support. 454# When omitted it's automatically enabled for the X-windows GUI. 455# HANGUL - Input Hangul (Korean) language using internal routines. 456# Uncomment one of these when you want to input a multibyte language. 457#CONF_OPT_INPUT = --enable-xim 458#CONF_OPT_INPUT = --disable-xim 459#CONF_OPT_INPUT = --enable-hangulinput 460 461# FONTSET - X fontset support for output of languages with many characters. 462# Uncomment this when you want to output a multibyte language. 463#CONF_OPT_OUTPUT = --enable-fontset 464 465# ACL - Uncomment this when you do not want to include ACL support, even 466# though your system does support it. E.g., when it's buggy. 467#CONF_OPT_ACL = --disable-acl 468 469# gpm - For mouse support on Linux console via gpm 470# Uncomment this when you do not want to include gpm support, even 471# though you have gpm libraries and includes. 472#CONF_OPT_GPM = --disable-gpm 473 474# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 475# Uncomment this when you do not want do include sysmouse support, even 476# though you have /dev/sysmouse and includes. 477#CONF_OPT_SYSMOUSE = --disable-sysmouse 478 479# FEATURES - For creating Vim with more or less features 480# Uncomment one of these lines when you want to include few to many features. 481# The default is "normal". 482#CONF_OPT_FEAT = --with-features=tiny 483#CONF_OPT_FEAT = --with-features=small 484#CONF_OPT_FEAT = --with-features=normal 485#CONF_OPT_FEAT = --with-features=big 486#CONF_OPT_FEAT = --with-features=huge 487 488# COMPILED BY - For including a specific e-mail address for ":version". 489#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 490 491# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 492# (otherwise Vim configure will try to include xterm titlebar access) 493# Also disable the GUI above, otherwise it will be included anyway. 494# When both GUI and X11 have been disabled this may save about 15% of the 495# code and make Vim startup quicker. 496#CONF_OPT_X = --without-x 497 498# X WINDOWS DIRECTORY - specify X directories 499# If configure can't find you X stuff, or if you have multiple X11 derivatives 500# installed, you may wish to specify which one to use. 501# Select nothing to let configure choose. 502# This here selects openwin (as found on sun). 503#XROOT = /usr/openwin 504#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 505 506# X11 Session Management Protocol support 507# Vim will try to use XSMP to catch the user logging out if there are unsaved 508# files. Uncomment this line to disable that (it prevents vim trying to open 509# communications with the session manager). 510#CONF_OPT_XSMP = --disable-xsmp 511 512# You may wish to include xsmp but use exclude xsmp-interact if the logout 513# XSMP functionality does not work well with your session-manager (at time of 514# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 515# applications after Vim has cancelled a logout (until Vim quits). This 516# *might* be the Vim code, but is more likely a bug in early GNOME-1. 517# This disables the dialog that asks you if you want to save files or not. 518#CONF_OPT_XSMP = --disable-xsmp-interact 519 520# COMPILER - Name of the compiler {{{1 521# The default from configure will mostly be fine, no need to change this, just 522# an example. If a compiler is defined here, configure will use it rather than 523# probing for one. It is dangerous to change this after configure was run. 524# Make will use your choice then -- but beware: Many things may change with 525# another compiler. It is wise to run 'make reconfig' to start all over 526# again. 527#CC = cc 528#CC = gcc 529 530# COMPILER FLAGS - change as you please. Either before running {{{1 531# configure or afterwards. For examples see below. 532# When using -g with some older versions of Linux you might get a 533# statically linked executable. 534# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 535#CFLAGS = -g 536#CFLAGS = -O 537 538# Optimization limits - depends on the compiler. Automatic check in configure 539# doesn't work very well, because many compilers only give a warning for 540# unrecognized arguments. 541#CFLAGS = -O -OPT:Olimit=2600 542#CFLAGS = -O -Olimit 2000 543#CFLAGS = -O -FOlimit,2000 544 545# Often used for GCC: mixed optimizing, lot of optimizing, debugging 546#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 547#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 548#CFLAGS = -g -Wall -Wmissing-prototypes 549#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 550#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 551#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 552 553# Use this with GCC to check for mistakes, unused arguments, etc. 554#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -D_FORTIFY_SOURCE=1 -DU_DEBUG 555#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -D_FORTIFY_SOURCE=1 -DU_DEBUG 556#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 557#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 558 559# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 560# allocated memory (and makes every malloc()/free() very slow). 561# Electric Fence is free (search ftp sites). 562# You may want to set the EF_PROTECT_BELOW environment variable to check the 563# other side of allocated memory. 564# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 565# as root: sysctl -w vm.max_proc_mmap=30000 566#EXTRA_LIBS = /usr/local/lib/libefence.a 567 568# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 569#PURIFY = purify 570 571# NBDEBUG - debugging the netbeans interface. 572#EXTRA_DEFS = -DNBDEBUG 573 574# }}} 575 576# LINT - for running lint 577# For standard Unix lint 578LINT = lint 579LINT_OPTIONS = -beprxzF 580# For splint 581# It doesn't work well, crashes on include files and non-ascii characters. 582#LINT = splint 583#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 584 585# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 586# Might not work with GUI or Perl. 587# For unknown reasons adding "-lc" fixes a linking problem with GCC. That's 588# probably a bug in the "-pg" implementation. 589# Need to recompile everything after changing this: "make clean" "make". 590#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 591#PROFILE_LIBS = -pg 592#PROFILE_LIBS = -pg -lc 593 594# MEMORY LEAK DETECTION 595# Requires installing the ccmalloc library. 596# Configuration is in the .ccmalloc or ~/.ccmalloc file. 597# Doesn't work very well, since memory linked to from global variables 598# (in libraries) is also marked as leaked memory. 599#PROFILE_CFLAGS = -DEXITFREE 600#PROFILE_LIBS = -lccmalloc 601 602##################################################### 603### Specific systems, check if yours is listed! ### {{{ 604##################################################### 605 606### Uncomment things here only if the values chosen by configure are wrong. 607### It's better to adjust configure.in and "make autoconf", if you can! 608### Then send the required changes to configure.in to the bugs list. 609 610### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 611### 612#CC = shlicc2 613#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 614 615### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 616### The first probably works on all systems 617### The second should work a bit better on newer systems 618### The third should work a bit better on HPUX 11.11 619### Information provided by: Richard Allen <[email protected]> 620#CC = c89 -D_HPUX_SOURCE 621#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 622#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 623 624### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 625### when the default (ISO) digraphs look completely wrong. 626### After changing this do "touch digraph.c; make". 627#EXTRA_DEFS = -DHPUX_DIGRAPHS 628 629### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 630### is too small to compile many routines. It produces too much defining 631### and no space errors. 632### Uncomment the following to specify a larger macro definition table. 633#CFLAGS = -Wp,-H256000 634 635### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 636### libraries in /usr/lib instead of /lib (avoiding transition links). 637### Information provided by: David Green 638#XROOT = /usr 639#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 640#GUI_INC_LOC = -I/usr/include/Motif1.2 641#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 642 643### (5) AIX 4.1.4 with cc 644#CFLAGS = -O -qmaxmem=8192 645 646### AIX with c89 (Walter Briscoe) 647#CC = c89 648#CPPFLAGS = -D_ALL_SOURCE 649 650### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 651# needed to avoid a problem where strings.h gets included 652#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 653 654### (W) Solaris with multi-threaded libraries (-lthread): 655### If suspending doesn't work properly, try using this line: 656#EXTRA_DEFS = -D_REENTRANT 657 658### (7) Solaris 2.4/2.5 with Centerline compiler 659#CC = clcc 660#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 661#CFLAGS = -O 662 663### (9) Solaris 2.x with cc (SunPro), using Athena. 664### Only required for compiling gui_at_sb.c. 665### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 666### Use one of the lines (either Full ANSI or no ANSI at all) 667#CFLAGS = $(CFLAGS) -Xc 668#CFLAGS = $(CFLAGS) -Xs 669 670### Solaris 2.3 with X11 and specific cc 671#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 672 673### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 674#CC = /usr/ucb/cc 675#EXTRA_LIBS = -R/usr/ucblib 676 677### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 678# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 679#CC = cc 680#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 681#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 682#XPM_IPATH = -I$(XPM_DIR)/include 683#EXTRA_LIBS = $(XPM_LIB) 684#EXTRA_IPATHS = $(XPM_IPATH) 685#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 686 687### Solaris with workshop compilers: Vim is unstable when compiled with 688# "-fast". Use this instead. (Shea Martin) 689#CFLAGS = -x02 -xtarget=ultra 690 691### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 692#LDFLAGS = -lw -ldl -lXmu 693#GUI_LIB_LOC = -L/usr/local/lib 694 695### (8) Unisys 6035 (Glauber Ribeiro) 696#EXTRA_LIBS = -lnsl -lsocket -lgen 697 698### When builtin functions cause problems with gcc (for Sun 4.1.x) 699#CFLAGS = -O2 -Wall -traditional -Wno-implicit 700 701### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 702#EXTRA_DEFS = -DDOMAIN 703#CFLAGS= -O -A systype,bsd4.3 704 705### Coherent 4.2.10 on Intel 386 platform 706#EXTRA_DEFS = -Dvoid=int 707#EXTRA_LIBS = -lterm -lsocket 708 709### SCO 3.2, with different library name for terminfo 710#EXTRA_LIBS = -ltinfo 711 712### UTS2 for Amdahl UTS 2.1.x 713#EXTRA_DEFS = -DUTS2 714#EXTRA_LIBS = -lsocket 715 716### UTS4 for Amdahl UTS 4.x 717#EXTRA_DEFS = -DUTS4 -Xa 718 719### USL for Unix Systems Laboratories (SYSV 4.2) 720#EXTRA_DEFS = -DUSL 721 722### RISCos on MIPS without X11 723#EXTRA_DEFS = -DMIPS 724 725### RISCos on MIPS with X11 726#EXTRA_LIBS = -lsun 727 728### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 729#CC= gcc -D_POSIX_SOURCE 730#CFLAGS= -O2 731#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 732 733### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 734### Also use the CONF_TERM_LIB below! 735#EXTRA_LIBS = -lgen 736 737### (D) QNX (by G.F. Desrochers) 738#CFLAGS = -g -O -mf -4 739 740### (F) QNX (by John Oleynick) 741# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 742# CONF_OPT_X = --without-x. 743# 2. make config 744# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 745# have -ldir (does config find it somewhere?) and -ltermcap has at 746# least one problem so I use termlib.o instead. The problem with 747# termcap is that it segfaults if you call it with the name of 748# a non-existent terminal type. 749# 4. edit auto/config.h and add #define USE_TMPNAM 750# 5. add termlib.o to OBJ 751# 6. make 752 753### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 754#EXTRA_LIBS = -lgen 755 756### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 757#EXTRA_LIBS = -lgen -lnsl 758### For SINIX-Y this is needed for the right prototype of gettimeofday() 759#EXTRA_DEFS = -D_XPG_IV 760 761### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 762# Use both "-F O3" lines for optimization or the "-g" line for debugging 763#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 764#CFLAGS = -F O3 -DSINIXN 765#LDFLAGS = -F O3 766#CFLAGS = -g -DSINIXN 767 768### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 769#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 770#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 771 772### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 773#GUI_INC_LOC = -I/usr/include 774#GUI_LIB_LOC = -L/usr/lib 775#EXTRA_LIBS = -lgen 776 777### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 778#GUI_INC_LOC = -I/usr/necccs/include 779#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 780#XROOT = /usr/necccs 781#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 782#EXTRA_LIBS = -lsocket -lgen 783 784### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 785# Not needed for Irix 5.3, Ives Aerts reported 786#EXTRA_LIBS = -lmalloc -lc_s 787# Irix 4.0, when regexp and regcmp cannot be found when linking: 788#EXTRA_LIBS = -lmalloc -lc_s -lPW 789 790### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 791# Note: This newer option style is used with the MipsPro compilers ONLY if 792# you are compiling an "n32" or "64" ABI binary (use either a -n32 793# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 794# then the CFLAGS option format will be the typical style (i.e. 795# -Olimit 3000). 796#CFLAGS = -OPT:Olimit=3000 -O 797 798### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 799# compiler features! Beware, the optimization is EXTREMELY thorough 800# and takes quite a long time. 801# Note: See the note above. Here, the -mips3 option automatically 802# enables either the "n32" or "64" ABI, depending on what machine you 803# are compiling on (n32 is explicitly enabled here, just to make sure). 804#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 805#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 806 807### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 808### Suggested by Jon Wright <[email protected]>. 809### Tested on R8000 IRIX6.1 Power Indigo2. 810### Check /etc/compiler.defaults for your compiler settings. 811# either (for 64 bit pointers) uncomment the following line 812#GUI_LIB_LOC = -L/usr/lib64 813# then 814# 1) make config 815# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 816# 3) make 817# 818# or (for 32bit pointers) uncomment the following line 819#EXTRA_DEFS = -n32 820#GUI_LIB_LOC = -L/usr/lib32 821# then 822# 1) make config 823# 2) edit auto/config.mk, add -n32 to LDFLAGS 824# 3) make 825# 826#Alternatively: use -o32 instead of -n32. 827### 828 829### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 830### which is found by configure, doesn't work correctly. Symptom is the 831### error message "Termcap entry too long". Uncomment the next line. 832### On AIX 4.2.1 (and other versions probably), libtermcap is reported 833### not to display properly. 834### after changing this, you need to do "make reconfig". 835#CONF_TERM_LIB = --with-tlib=curses 836 837### (E) If you want to use termlib library instead of the automatically found 838### one. After changing this, you need to do "make reconfig". 839#CONF_TERM_LIB = --with-tlib=termlib 840 841### (a) ESIX V4.2 (Reinhard Wobst) 842#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 843 844### (c) Tandem/NSK (Matthew Woehlke) 845#EXTRA_LIBS = -lfloss 846 847### If you want to use ncurses library instead of the automatically found one 848### after changing this, you need to do "make reconfig". 849#CONF_TERM_LIB = --with-tlib=ncurses 850 851### For GCC on MSDOS, the ".exe" suffix will be added. 852#EXEEXT = .exe 853#LNKEXT = .exe 854 855### (O) For LynxOS 2.5.0, tested on PC. 856#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 857### For LynxOS 3.0.1, tested on PPC 858#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 859### For LynxOS 3.1.0, tested on PC 860#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 861 862 863### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 864### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 865#CFLAGS = -O -Qtarget=m88110compat 866#EXTRA_LIBS = -lgen 867 868##################### end of system specific lines ################### }}} 869 870### Names of the programs and targets {{{1 871VIMTARGET = $(VIMNAME)$(EXEEXT) 872EXTARGET = $(EXNAME)$(LNKEXT) 873VIEWTARGET = $(VIEWNAME)$(LNKEXT) 874GVIMNAME = g$(VIMNAME) 875GVIMTARGET = $(GVIMNAME)$(LNKEXT) 876GVIEWNAME = g$(VIEWNAME) 877GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 878RVIMNAME = r$(VIMNAME) 879RVIMTARGET = $(RVIMNAME)$(LNKEXT) 880RVIEWNAME = r$(VIEWNAME) 881RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 882RGVIMNAME = r$(GVIMNAME) 883RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 884RGVIEWNAME = r$(GVIEWNAME) 885RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 886VIMDIFFNAME = $(VIMNAME)diff 887GVIMDIFFNAME = g$(VIMDIFFNAME) 888VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 889GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 890EVIMNAME = e$(VIMNAME) 891EVIMTARGET = $(EVIMNAME)$(LNKEXT) 892EVIEWNAME = e$(VIEWNAME) 893EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 894 895### Names of the tools that are also made {{{1 896TOOLS = xxd/xxd$(EXEEXT) 897 898### Installation directories. The defaults come from configure. {{{1 899# 900### prefix the top directory for the data (default "/usr/local") 901# 902# Uncomment the next line to install Vim in your home directory. 903#prefix = $(HOME) 904 905### exec_prefix is the top directory for the executable (default $(prefix)) 906# 907# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 908#exec_prefix = /usr/machine 909 910### BINDIR dir for the executable (default "$(exec_prefix)/bin") 911### MANDIR dir for the manual pages (default "$(prefix)/man") 912### DATADIR dir for the other files (default "$(prefix)/lib" or 913# "$(prefix)/share") 914# They may be different when using different architectures for the 915# executable and a common directory for the other files. 916# 917# Uncomment the next line to install Vim in "/usr/bin" 918#BINDIR = /usr/bin 919# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 920#MANDIR = /usr/share/man 921# Uncomment the next line to install Vim help files in "/usr/share/vim" 922#DATADIR = /usr/share 923 924### DESTDIR root of the installation tree. This is prepended to the other 925# directories. This directory must exist. 926#DESTDIR = ~/pkg/vim 927 928### Directory of the man pages 929MAN1DIR = /man1 930 931### Vim version (adjusted by a script) 932VIMMAJOR = 7 933VIMMINOR = 3e 934 935### Location of Vim files (should not need to be changed, and {{{1 936### some things might not work when they are changed!) 937VIMDIR = /vim 938VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 939HELPSUBDIR = /doc 940COLSUBDIR = /colors 941SYNSUBDIR = /syntax 942INDSUBDIR = /indent 943AUTOSUBDIR = /autoload 944PLUGSUBDIR = /plugin 945FTPLUGSUBDIR = /ftplugin 946LANGSUBDIR = /lang 947COMPSUBDIR = /compiler 948KMAPSUBDIR = /keymap 949MACROSUBDIR = /macros 950TOOLSSUBDIR = /tools 951TUTORSUBDIR = /tutor 952SPELLSUBDIR = /spell 953PRINTSUBDIR = /print 954PODIR = po 955 956### VIMLOC common root of the Vim files (all versions) 957### VIMRTLOC common root of the runtime Vim files (this version) 958### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 959### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 960### HELPSUBLOC location for help files 961### COLSUBLOC location for colorscheme files 962### SYNSUBLOC location for syntax files 963### INDSUBLOC location for indent files 964### AUTOSUBLOC location for standard autoload files 965### PLUGSUBLOC location for standard plugin files 966### FTPLUGSUBLOC location for ftplugin files 967### LANGSUBLOC location for language files 968### COMPSUBLOC location for compiler files 969### KMAPSUBLOC location for keymap files 970### MACROSUBLOC location for macro files 971### TOOLSSUBLOC location for tools files 972### TUTORSUBLOC location for tutor files 973### SPELLSUBLOC location for spell files 974### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 975### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 976### You can override these if you want to install them somewhere else. 977### Edit feature.h for compile-time settings. 978VIMLOC = $(DATADIR)$(VIMDIR) 979VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 980VIMRCLOC = $(VIMLOC) 981HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 982COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 983SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 984INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 985AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 986PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 987FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 988LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 989COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 990KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 991MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 992TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 993TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 994SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 995PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 996SCRIPTLOC = $(VIMRTLOC) 997 998### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 999### the runtime directory is not below it. 1000#VIMRUNTIMEDIR = $(VIMRTLOC) 1001 1002### Name of the evim file target. 1003EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1004MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1005 1006### Name of the menu file target. 1007SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1008SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1009SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1010 1011### Name of the bugreport file target. 1012SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1013 1014### Name of the file type detection file target. 1015SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1016 1017### Name of the file type detection file target. 1018SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1019 1020### Name of the file type detection script file target. 1021SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1022 1023### Name of the ftplugin-on file target. 1024SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1025 1026### Name of the ftplugin-off file target. 1027SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1028 1029### Name of the indent-on file target. 1030SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1031 1032### Name of the indent-off file target. 1033SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1034 1035### Name of the option window script file target. 1036SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1037 1038# Program to install the program in the target directory. Could also be "mv". 1039INSTALL_PROG = cp 1040 1041# Program to install the data in the target directory. Cannot be "mv"! 1042INSTALL_DATA = cp 1043INSTALL_DATA_R = cp -r 1044 1045### Program to run on installed binary 1046#STRIP = strip 1047 1048### Permissions for binaries {{{1 1049BINMOD = 755 1050 1051### Permissions for man page 1052MANMOD = 644 1053 1054### Permissions for help files 1055HELPMOD = 644 1056 1057### Permissions for Perl and shell scripts 1058SCRIPTMOD = 755 1059 1060### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1061VIMSCRIPTMOD = 644 1062 1063### Permissions for all directories that are created 1064DIRMOD = 755 1065 1066### Permissions for all other files that are created 1067FILEMOD = 644 1068 1069# Where to copy the man and help files from 1070HELPSOURCE = ../runtime/doc 1071 1072# Where to copy the script files from (menu, bugreport) 1073SCRIPTSOURCE = ../runtime 1074 1075# Where to copy the colorscheme files from 1076COLSOURCE = ../runtime/colors 1077 1078# Where to copy the syntax files from 1079SYNSOURCE = ../runtime/syntax 1080 1081# Where to copy the indent files from 1082INDSOURCE = ../runtime/indent 1083 1084# Where to copy the standard plugin files from 1085AUTOSOURCE = ../runtime/autoload 1086 1087# Where to copy the standard plugin files from 1088PLUGSOURCE = ../runtime/plugin 1089 1090# Where to copy the ftplugin files from 1091FTPLUGSOURCE = ../runtime/ftplugin 1092 1093# Where to copy the macro files from 1094MACROSOURCE = ../runtime/macros 1095 1096# Where to copy the tools files from 1097TOOLSSOURCE = ../runtime/tools 1098 1099# Where to copy the tutor files from 1100TUTORSOURCE = ../runtime/tutor 1101 1102# Where to copy the spell files from 1103SPELLSOURCE = ../runtime/spell 1104 1105# Where to look for language specific files 1106LANGSOURCE = ../runtime/lang 1107 1108# Where to look for compiler files 1109COMPSOURCE = ../runtime/compiler 1110 1111# Where to look for keymap files 1112KMAPSOURCE = ../runtime/keymap 1113 1114# Where to look for print resource files 1115PRINTSOURCE = ../runtime/print 1116 1117# If you are using Linux, you might want to use this to make vim the 1118# default vi editor, it will create a link from vi to Vim when doing 1119# "make install". An existing file will be overwritten! 1120# When not using it, some make programs can't handle an undefined $(LINKIT). 1121#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1122LINKIT = @echo >/dev/null 1123 1124### 1125### GRAPHICAL USER INTERFACE (GUI). {{{1 1126### 'configure --enable-gui' can enable one of these for you if you did set 1127### a corresponding CONF_OPT_GUI above and have X11. 1128### Override configures choice by uncommenting all the following lines. 1129### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1130### for enabling the Athena or Motif GUI. 1131#GUI_SRC = $(NONE_SRC) 1132#GUI_OBJ = $(NONE_OBJ) 1133#GUI_DEFS = $(NONE_DEFS) 1134#GUI_IPATH = $(NONE_IPATH) 1135#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1136#GUI_LIBS1 = $(NONE_LIBS1) 1137#GUI_LIBS2 = $(NONE_LIBS2) 1138#GUI_INSTALL = $(NONE_INSTALL) 1139#GUI_TARGETS = $(NONE_TARGETS) 1140#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1141#GUI_TESTTARGET = $(NONE_TESTTARGET) 1142#GUI_BUNDLE = $(NONE_BUNDLE) 1143 1144# Without a GUI install the normal way. 1145NONE_INSTALL = install_normal 1146 1147### GTK GUI 1148GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1149 gui_beval.c 1150GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1151 objects/pty.o objects/gui_gtk_f.o \ 1152 objects/gui_beval.o 1153GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1154GTK_IPATH = $(GUI_INC_LOC) 1155GTK_LIBS_DIR = $(GUI_LIB_LOC) 1156GTK_LIBS1 = 1157GTK_LIBS2 = $(GTK_LIBNAME) 1158GTK_INSTALL = install_normal install_gui_extra 1159GTK_TARGETS = installglinks 1160GTK_MAN_TARGETS = yes 1161GTK_TESTTARGET = gui 1162GTK_BUNDLE = 1163 1164### Motif GUI 1165MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1166 gui_xmdlg.c gui_xmebw.c 1167MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1168 objects/pty.o objects/gui_beval.o \ 1169 objects/gui_xmdlg.o objects/gui_xmebw.o 1170MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1171MOTIF_IPATH = $(GUI_INC_LOC) 1172MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1173MOTIF_LIBS1 = 1174MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1175MOTIF_INSTALL = install_normal install_gui_extra 1176MOTIF_TARGETS = installglinks 1177MOTIF_MAN_TARGETS = yes 1178MOTIF_TESTTARGET = gui 1179MOTIF_BUNDLE = 1180 1181### Athena GUI 1182### Use Xaw3d to make the menus look a little bit nicer 1183#XAW_LIB = -lXaw3d 1184XAW_LIB = -lXaw 1185 1186### When using Xaw3d, uncomment/comment the following lines to also get the 1187### scrollbars from Xaw3d. 1188#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1189#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1190# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1191#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1192# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1193# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1194ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1195 gui_at_sb.c gui_at_fs.c 1196ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1197 objects/pty.o objects/gui_beval.o \ 1198 objects/gui_at_sb.o objects/gui_at_fs.o 1199ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1200 1201ATHENA_IPATH = $(GUI_INC_LOC) 1202ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1203ATHENA_LIBS1 = $(XAW_LIB) 1204ATHENA_LIBS2 = -lXt 1205ATHENA_INSTALL = install_normal install_gui_extra 1206ATHENA_TARGETS = installglinks 1207ATHENA_MAN_TARGETS = yes 1208ATHENA_TESTTARGET = gui 1209ATHENA_BUNDLE = 1210 1211### neXtaw GUI 1212NEXTAW_LIB = -lneXtaw 1213 1214NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1215NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1216 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1217NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1218 1219NEXTAW_IPATH = $(GUI_INC_LOC) 1220NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1221NEXTAW_LIBS1 = $(NEXTAW_LIB) 1222NEXTAW_LIBS2 = -lXt 1223NEXTAW_INSTALL = install_normal install_gui_extra 1224NEXTAW_TARGETS = installglinks 1225NEXTAW_MAN_TARGETS = yes 1226NEXTAW_TESTTARGET = gui 1227NEXTAW_BUNDLE = 1228 1229### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1230# errors: ld: Undefined symbol 1231# _get_wmShellWidgetClass 1232# _get_applicationShellWidgetClass 1233# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1234# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1235#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1236# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1237# too: 1238#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1239 1240# PHOTON GUI 1241PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1242PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1243PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1244PHOTONGUI_IPATH = 1245PHOTONGUI_LIBS_DIR = 1246PHOTONGUI_LIBS1 = -lph -lphexlib 1247PHOTONGUI_LIBS2 = 1248PHOTONGUI_INSTALL = install_normal install_gui_extra 1249PHOTONGUI_TARGETS = installglinks 1250PHOTONGUI_MAN_TARGETS = yes 1251PHOTONGUI_TESTTARGET = gui 1252PHOTONGUI_BUNDLE = 1253 1254# CARBON GUI 1255CARBONGUI_SRC = gui.c gui_mac.c 1256CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1257CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1258 -Wall -Wno-unknown-pragmas \ 1259 -mdynamic-no-pic -pipe 1260CARBONGUI_IPATH = -I. -Iproto 1261CARBONGUI_LIBS_DIR = 1262CARBONGUI_LIBS1 = -framework Carbon 1263CARBONGUI_LIBS2 = 1264CARBONGUI_INSTALL = install_macosx 1265CARBONGUI_TARGETS = 1266CARBONGUI_MAN_TARGETS = 1267CARBONGUI_TESTTARGET = gui 1268CARBONGUI_BUNDLE = gui_bundle 1269APPDIR = $(VIMNAME).app 1270CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1271 1272# All GUI files 1273ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1274ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1275 1276# }}} 1277 1278### Command to create dependencies based on #include "..." 1279### prototype headers are ignored due to -DPROTO, system 1280### headers #include <...> are ignored if we use the -MM option, as 1281### e.g. provided by gcc-cpp. 1282### Include FEAT_GUI to get gependency on gui.h 1283### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1284CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1285 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1286 1287# flags for cproto 1288# This is for cproto 3 patchlevel 8 or below 1289# __inline, __attribute__ and __extension__ are not recognized by cproto 1290# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1291#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1292# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1293# -D__extension__= -D__restrict="" \ 1294# -D__gnuc_va_list=char -D__builtin_va_list=char 1295 1296# 1297# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1298# __inline and __attribute__ are now recognized by cproto 1299# -D"foo()=" is not supported by all compilers so do not use it 1300NO_ATTR= 1301# 1302# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1303# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1304# 1305# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1306PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1307 1308 1309################################################ 1310## no changes required below this line ## 1311################################################ 1312 1313SHELL = /bin/sh 1314 1315.SUFFIXES: 1316.SUFFIXES: .c .o .pro 1317 1318PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1319POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1320 1321ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1322 1323# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1324# with "-E". 1325OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1326 1327LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1328 1329LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1330 1331DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1332 1333ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1334ALL_LIBS = \ 1335 $(GUI_LIBS1) \ 1336 $(GUI_X_LIBS) \ 1337 $(GUI_LIBS2) \ 1338 $(X_PRE_LIBS) \ 1339 $(X_LIBS) \ 1340 $(X_EXTRA_LIBS) \ 1341 $(LIBS) \ 1342 $(EXTRA_LIBS) \ 1343 $(LUA_LIBS) \ 1344 $(MZSCHEME_LIBS) \ 1345 $(PERL_LIBS) \ 1346 $(PYTHON_LIBS) \ 1347 $(PYTHON3_LIBS) \ 1348 $(TCL_LIBS) \ 1349 $(RUBY_LIBS) \ 1350 $(PROFILE_LIBS) 1351 1352# abbreviations 1353DEST_BIN = $(DESTDIR)$(BINDIR) 1354DEST_VIM = $(DESTDIR)$(VIMLOC) 1355DEST_RT = $(DESTDIR)$(VIMRTLOC) 1356DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1357DEST_COL = $(DESTDIR)$(COLSUBLOC) 1358DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1359DEST_IND = $(DESTDIR)$(INDSUBLOC) 1360DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1361DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1362DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1363DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1364DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1365DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1366DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1367DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1368DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1369DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1370DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1371DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1372DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1373 1374# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1375# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1376# directory first. 1377# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1378DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1379DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1380DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1381DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1382DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1383DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1384DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1385DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1386DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1387DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1388DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1389DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1390 1391# BASIC_SRC: files that are always used 1392# GUI_SRC: extra GUI files for current configuration 1393# ALL_GUI_SRC: all GUI files for Unix 1394# 1395# SRC: files used for current configuration 1396# TAGS_SRC: source files used for make tags 1397# TAGS_INCL: include files used for make tags 1398# ALL_SRC: source files used for make depend and make lint 1399 1400TAGS_INCL = *.h 1401 1402BASIC_SRC = \ 1403 blowfish.c \ 1404 buffer.c \ 1405 charset.c \ 1406 diff.c \ 1407 digraph.c \ 1408 edit.c \ 1409 eval.c \ 1410 ex_cmds.c \ 1411 ex_cmds2.c \ 1412 ex_docmd.c \ 1413 ex_eval.c \ 1414 ex_getln.c \ 1415 fileio.c \ 1416 fold.c \ 1417 getchar.c \ 1418 hardcopy.c \ 1419 hashtab.c \ 1420 if_cscope.c \ 1421 if_xcmdsrv.c \ 1422 main.c \ 1423 mark.c \ 1424 memfile.c \ 1425 memline.c \ 1426 menu.c \ 1427 message.c \ 1428 misc1.c \ 1429 misc2.c \ 1430 move.c \ 1431 mbyte.c \ 1432 normal.c \ 1433 ops.c \ 1434 option.c \ 1435 os_unix.c \ 1436 auto/pathdef.c \ 1437 popupmnu.c \ 1438 quickfix.c \ 1439 regexp.c \ 1440 screen.c \ 1441 search.c \ 1442 sha256.c \ 1443 spell.c \ 1444 syntax.c \ 1445 tag.c \ 1446 term.c \ 1447 ui.c \ 1448 undo.c \ 1449 version.c \ 1450 window.c \ 1451 $(OS_EXTRA_SRC) 1452 1453SRC = $(BASIC_SRC) \ 1454 $(GUI_SRC) \ 1455 $(HANGULIN_SRC) \ 1456 $(LUA_SRC) \ 1457 $(MZSCHEME_SRC) \ 1458 $(PERL_SRC) \ 1459 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1460 $(TCL_SRC) \ 1461 $(RUBY_SRC) \ 1462 $(SNIFF_SRC) \ 1463 $(WORKSHOP_SRC) \ 1464 $(WSDEBUG_SRC) 1465 1466TAGS_SRC = *.c *.cpp if_perl.xs 1467 1468EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1469 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1470 gui_beval.c workshop.c wsdebug.c integration.c netbeans.c 1471 1472# All sources, also the ones that are not configured 1473ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1474 1475# Which files to check with lint. Select one of these three lines. ALL_SRC 1476# checks more, but may not work well for checking a GUI that wasn't configured. 1477# The perl sources also don't work well with lint. 1478LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1479 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1480#LINT_SRC = $(SRC) 1481#LINT_SRC = $(ALL_SRC) 1482#LINT_SRC = $(BASIC_SRC) 1483 1484OBJ = \ 1485 objects/buffer.o \ 1486 objects/blowfish.o \ 1487 objects/charset.o \ 1488 objects/diff.o \ 1489 objects/digraph.o \ 1490 objects/edit.o \ 1491 objects/eval.o \ 1492 objects/ex_cmds.o \ 1493 objects/ex_cmds2.o \ 1494 objects/ex_docmd.o \ 1495 objects/ex_eval.o \ 1496 objects/ex_getln.o \ 1497 objects/fileio.o \ 1498 objects/fold.o \ 1499 objects/getchar.o \ 1500 objects/hardcopy.o \ 1501 objects/hashtab.o \ 1502 $(HANGULIN_OBJ) \ 1503 objects/if_cscope.o \ 1504 objects/if_xcmdsrv.o \ 1505 objects/main.o \ 1506 objects/mark.o \ 1507 objects/memfile.o \ 1508 objects/memline.o \ 1509 objects/menu.o \ 1510 objects/message.o \ 1511 objects/misc1.o \ 1512 objects/misc2.o \ 1513 objects/move.o \ 1514 objects/mbyte.o \ 1515 objects/normal.o \ 1516 objects/ops.o \ 1517 objects/option.o \ 1518 objects/os_unix.o \ 1519 objects/pathdef.o \ 1520 objects/popupmnu.o \ 1521 objects/quickfix.o \ 1522 objects/regexp.o \ 1523 objects/screen.o \ 1524 objects/search.o \ 1525 objects/sha256.o \ 1526 objects/spell.o \ 1527 objects/syntax.o \ 1528 $(SNIFF_OBJ) \ 1529 objects/tag.o \ 1530 objects/term.o \ 1531 objects/ui.o \ 1532 objects/undo.o \ 1533 objects/window.o \ 1534 $(GUI_OBJ) \ 1535 $(LUA_OBJ) \ 1536 $(MZSCHEME_OBJ) \ 1537 $(PERL_OBJ) \ 1538 $(PYTHON_OBJ) \ 1539 $(PYTHON3_OBJ) \ 1540 $(TCL_OBJ) \ 1541 $(RUBY_OBJ) \ 1542 $(OS_EXTRA_OBJ) \ 1543 $(WORKSHOP_OBJ) \ 1544 $(NETBEANS_OBJ) \ 1545 $(WSDEBUG_OBJ) 1546 1547PRO_AUTO = \ 1548 blowfish.pro \ 1549 buffer.pro \ 1550 charset.pro \ 1551 diff.pro \ 1552 digraph.pro \ 1553 edit.pro \ 1554 eval.pro \ 1555 ex_cmds.pro \ 1556 ex_cmds2.pro \ 1557 ex_docmd.pro \ 1558 ex_eval.pro \ 1559 ex_getln.pro \ 1560 fileio.pro \ 1561 fold.pro \ 1562 getchar.pro \ 1563 hardcopy.pro \ 1564 hashtab.pro \ 1565 hangulin.pro \ 1566 if_cscope.pro \ 1567 if_xcmdsrv.pro \ 1568 if_python.pro \ 1569 if_python3.pro \ 1570 if_ruby.pro \ 1571 main.pro \ 1572 mark.pro \ 1573 memfile.pro \ 1574 memline.pro \ 1575 menu.pro \ 1576 message.pro \ 1577 misc1.pro \ 1578 misc2.pro \ 1579 move.pro \ 1580 mbyte.pro \ 1581 normal.pro \ 1582 ops.pro \ 1583 option.pro \ 1584 os_unix.pro \ 1585 popupmnu.pro \ 1586 quickfix.pro \ 1587 regexp.pro \ 1588 screen.pro \ 1589 search.pro \ 1590 sha256.pro \ 1591 spell.pro \ 1592 syntax.pro \ 1593 tag.pro \ 1594 term.pro \ 1595 termlib.pro \ 1596 ui.pro \ 1597 undo.pro \ 1598 version.pro \ 1599 window.pro \ 1600 gui_beval.pro \ 1601 workshop.pro \ 1602 netbeans.pro \ 1603 $(ALL_GUI_PRO) \ 1604 $(TCL_PRO) 1605 1606# Resources used for the Mac are in one directory. 1607RSRC_DIR = os_mac_rsrc 1608 1609PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1610 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1611 1612# Default target is making the executable and tools 1613all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1614 1615tools: $(TOOLS) 1616 1617# Run configure with all the setting from above. 1618# 1619# Note: auto/config.h doesn't depend on configure, because running configure 1620# doesn't always update auto/config.h. The timestamp isn't changed if the 1621# file contents didn't change (to avoid recompiling everything). Including a 1622# dependency on auto/config.h would cause running configure each time when 1623# auto/config.h isn't updated. The dependency on auto/config.mk should make 1624# sure configure is run when it's needed. 1625# 1626config auto/config.mk: auto/configure config.mk.in config.h.in 1627 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1628 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1629 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1630 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1631 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1632 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1633 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1634 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1635 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1636 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1637 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1638 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1639 $(CONF_OPT_SYSMOUSE) 1640 1641# Use "make reconfig" to rerun configure without cached values. 1642# When config.h changes, most things will be recompiled automatically. 1643# Invoke $(MAKE) to run config with the empty auto/config.mk. 1644# Invoke $(MAKE) to build all with the filled auto/config.mk. 1645reconfig: scratch clean 1646 $(MAKE) -f Makefile config 1647 $(MAKE) -f Makefile all 1648 1649# Run autoconf to produce auto/configure. 1650# Note: 1651# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1652# producing auto/configure. 1653# - autoconf is not run automatically, because a patch usually changes both 1654# configure.in and auto/configure but can't update the timestamps. People 1655# who do not have (the correct version of) autoconf would run into trouble. 1656# 1657# Two tricks are required to make autoconf put its output in the "auto" dir: 1658# - Temporarily move the ./configure script to ./configure.save. Don't 1659# overwrite it, it's probably the result of an aborted autoconf. 1660# - Use sed to change ./config.log to auto/config.log in the configure script. 1661# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1662# care of: 1663# - configure.lineno: has the line numbers replaced with $LINENO. That 1664# improves patches a LOT, thus use it instead (until someone says it doesn't 1665# work on some system). 1666# - autom4te.cache directory is created and not cleaned up. Delete it. 1667# - Uses ">config.log" instead of "./config.log". 1668autoconf: 1669 if test ! -f configure.save; then mv configure configure.save; fi 1670 autoconf 1671 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1672 chmod 755 auto/configure 1673 mv -f configure.save configure 1674 -rm -rf autom4te.cache 1675 -rm -f auto/config.status auto/config.cache 1676 1677# Re-execute this Makefile to include the new auto/config.mk produced by 1678# configure Only used when typing "make" with a fresh auto/config.mk. 1679myself: 1680 $(MAKE) -f Makefile all 1681 1682 1683# The normal command to compile a .c file to its .o file. 1684CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1685 1686 1687# Link the target for normal use or debugging. 1688# A shell script is used to try linking without unneccesary libraries. 1689$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1690 $(CCC) version.c -o objects/version.o 1691 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1692 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1693 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1694 1695xxd/xxd$(EXEEXT): xxd/xxd.c 1696 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1697 $(MAKE) -f Makefile 1698 1699# Build the language specific files if they were unpacked. 1700# Generate the converted .mo files separately, it's no problem if this fails. 1701languages: 1702 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1703 cd $(PODIR); \ 1704 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1705 fi 1706 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1707 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1708 fi 1709 1710# Update the *.po files for changes in the sources. Only run manually. 1711update-po: 1712 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1713 1714# Generate function prototypes. This is not needed to compile vim, but if 1715# you want to use it, cproto is out there on the net somewhere -- Webb 1716# 1717# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1718# few include files that can not be found, that's OK. 1719 1720proto: $(PRO_AUTO) $(PRO_MANUAL) 1721 1722# Filter out arguments that cproto doesn't support. 1723# Don't pass "-pthread" to cproto, it sees it as a list of individual flags. 1724# Don't pass "-fstack-protector" to cproto, for the same reason. 1725# The -E"gcc -E" argument must be separate to avoid problems with shell 1726# quoting. 1727CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1728 `echo '$(LINT_CFLAGS)' | sed -e 's/-pthread//g' -e 's/-fstack-protector//g'` 1729 1730### Would be nice if this would work for "normal" make. 1731### Currently it only works for (Free)BSD make. 1732#$(PRO_AUTO): $$(*F).c 1733# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1734 1735# Always define FEAT_GUI. This may generate a few warnings if it's also 1736# defined in auto/config.h, you can ignore that. 1737.c.pro: 1738 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1739 echo "/* vim: set ft=c : */" >> proto/$@ 1740 1741os_amiga.pro: os_amiga.c 1742 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1743 echo "/* vim: set ft=c : */" >> proto/$@ 1744 1745os_msdos.pro: os_msdos.c 1746 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1747 echo "/* vim: set ft=c : */" >> proto/$@ 1748 1749os_win16.pro: os_win16.c 1750 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1751 echo "/* vim: set ft=c : */" >> proto/$@ 1752 1753os_win32.pro: os_win32.c 1754 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1755 echo "/* vim: set ft=c : */" >> proto/$@ 1756 1757os_mswin.pro: os_mswin.c 1758 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1759 echo "/* vim: set ft=c : */" >> proto/$@ 1760 1761os_beos.pro: os_beos.c 1762 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1763 echo "/* vim: set ft=c : */" >> proto/$@ 1764 1765os_vms.pro: os_vms.c 1766# must use os_vms_conf.h for auto/config.h 1767 mv auto/config.h auto/config.h.save 1768 cp os_vms_conf.h auto/config.h 1769 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1770 echo "/* vim: set ft=c : */" >> proto/$@ 1771 rm auto/config.h 1772 mv auto/config.h.save auto/config.h 1773 1774# if_perl.pro is special: Use the generated if_perl.c for input and remove 1775# prototypes for local functions. 1776if_perl.pro: auto/if_perl.c 1777 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1778 1779 1780notags: 1781 -rm -f tags 1782 1783# Note: tags is made for the currently configured version, can't include both 1784# Motif and Athena GUI 1785# You can ignore error messages for missing files. 1786tags TAGS: notags 1787 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1788 1789# Make a highlight file for types. Requires Exuberant ctags and awk 1790types: types.vim 1791types.vim: $(TAGS_SRC) $(TAGS_INCL) 1792 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1793 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1794 {printf("%s ", $$1)}END{print ""}' > $@ 1795 1796# Execute the test scripts. Run these after compiling Vim, before installing. 1797# This doesn't depend on $(VIMTARGET), because that won't work when configure 1798# wasn't run yet. Restart make to build it instead. 1799# 1800# This will produce a lot of garbage on your screen, including a few error 1801# messages. Don't worry about that. 1802# If there is a real error, there will be a difference between "test.out" and 1803# a "test99.ok" file. 1804# If everything is alright, the final message will be "ALL DONE". If not you 1805# get "TEST FAILURE". 1806# 1807test check: 1808 $(MAKE) -f Makefile $(VIMTARGET) 1809 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1810 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1811 fi 1812 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1813 ln -s $(VIMTARGET) vim; \ 1814 fi 1815 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1816 1817testclean: 1818 cd testdir; $(MAKE) -f Makefile clean 1819 if test -d $(PODIR); then \ 1820 cd $(PODIR); $(MAKE) checkclean; \ 1821 fi 1822 1823install: $(GUI_INSTALL) 1824 1825install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1826 1827install_gui_extra: installgtutorbin 1828 1829installvim: installvimbin installtutorbin \ 1830 installruntime installlinks installmanlinks 1831 1832# 1833# Avoid overwriting an existing executable, somebody might be running it and 1834# overwriting it could cause it to crash. Deleting it is OK, it won't be 1835# really deleted until all running processes for it have exited. It is 1836# renamed first, in case the deleting doesn't work. 1837# 1838# If you want to keep an older version, rename it before running "make 1839# install". 1840# 1841installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1842 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1843 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1844 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1845 fi 1846 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1847 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1848 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1849# may create a link to the new executable from /usr/bin/vi 1850 -$(LINKIT) 1851 1852# Long list of arguments for the shell script that installs the manual pages 1853# for one language. 1854INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1855 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1856 1857# Install most of the runtime files 1858installruntime: installrtbase installmacros installtutor installspell 1859 1860# install the help files; first adjust the contents for the final location 1861installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1862 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1863 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1864 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1865 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1866 @echo generating help tags 1867# Generate the help tags with ":helptags" to handle all languages. 1868 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1869 cd $(HELPSOURCE); \ 1870 files=`ls *.txt tags`; \ 1871 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1872 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1873 cd $(DEST_HELP); \ 1874 chmod $(HELPMOD) $$files 1875 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1876 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1877# install the menu files 1878 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1879 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1880 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1881 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1882 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1883 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1884# install the evim file 1885 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1886 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1887 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1888 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1889# install the bugreport file 1890 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1891 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1892# install the example vimrc files 1893 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1894 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1895 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1896 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1897# install the file type detection files 1898 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1899 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1900 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1901 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1902 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1903 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1904 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1905 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1906 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1907 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1908 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1909 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1910 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1911 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1912 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1913 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1914# install the print resource files 1915 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1916 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1917# install the colorscheme files 1918 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1919 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1920# install the syntax files 1921 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1922 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1923# install the indent files 1924 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1925 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1926# install the standard autoload files 1927 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 1928 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 1929 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 1930 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 1931# install the standard plugin files 1932 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1933 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1934# install the ftplugin files 1935 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 1936 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1937# install the compiler files 1938 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1939 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1940 1941installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1942 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1943 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1944 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1945 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1946# When using CVS some CVS directories might have been copied. 1947# Also delete AAPDIR and *.info files. 1948 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 1949 if test -n "$$cvs"; then \ 1950 rm -rf $$cvs; \ 1951 fi 1952 1953# install the tutor files 1954installtutorbin: $(DEST_VIM) 1955 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1956 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1957 1958installgtutorbin: $(DEST_VIM) 1959 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 1960 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 1961 1962installtutor: $(DEST_RT) $(DEST_TUTOR) 1963 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1964 -rm -f $(DEST_TUTOR)/*.info 1965 chmod $(HELPMOD) $(DEST_TUTOR)/* 1966 1967# Install the spell files, if they exist. This assumes at least the English 1968# spell file is there. 1969installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 1970 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 1971 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 1972 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 1973 fi 1974 1975# install helper program xxd 1976installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1977 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 1978 $(INSTALL_TOOL_LANGS) 1979 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1980 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1981 rm -f $(DEST_BIN)/xxd.rm; \ 1982 fi 1983 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1984 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1985 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1986 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 1987 1988# install the runtime tools 1989 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1990# When using CVS some CVS directories might have been copied. 1991 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1992 if test -n "$$cvs"; then \ 1993 rm -rf $$cvs; \ 1994 fi 1995 -chmod $(FILEMOD) $(DEST_TOOLS)/* 1996# replace the path in some tools 1997 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 1998 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1999 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2000 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2001 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2002 2003# install the language specific files for tools, if they were unpacked 2004install-tool-languages: 2005 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2006 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2007 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2008 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2009 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2010 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2011 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2012 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2013 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2014 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2015 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2016 2017# install the language specific files, if they were unpacked 2018install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2019 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2020 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2021 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2022 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2023 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2024 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2025 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2026 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2027 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2028 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2029 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2030 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2031 $(DEST_MAN_FR) $(INSTALLMLARGS) 2032 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2033 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2034 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2035 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2036 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2037 $(DEST_MAN_IT) $(INSTALLMLARGS) 2038 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2039 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2040 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2041 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2042 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2043 $(DEST_MAN_PL) $(INSTALLMLARGS) 2044 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2045 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2046 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2047 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2048 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2049 $(DEST_MAN_RU) $(INSTALLMLARGS) 2050 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2051 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2052 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2053 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2054 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2055 fi 2056 if test -d $(LANGSOURCE); then \ 2057 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2058 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2059 fi 2060 if test -d $(KMAPSOURCE); then \ 2061 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2062 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2063 fi 2064 2065# install the icons for KDE, if the directory exists and the icon doesn't. 2066ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2067ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2068ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2069KDEPATH = $(HOME)/.kde/share/icons 2070install-icons: 2071 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2072 -a ! -f $(ICON48PATH)/gvim.png; then \ 2073 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2074 fi 2075 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2076 -a ! -f $(ICON32PATH)/gvim.png; then \ 2077 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2078 fi 2079 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2080 -a ! -f $(ICON16PATH)/gvim.png; then \ 2081 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2082 fi 2083 2084 2085$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2086 @echo Runtime files not found. 2087 @echo You need to unpack the runtime archive before running "make install". 2088 test -f error 2089 2090$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2091 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2092 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2093 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2094 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2095 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2096 -$(SHELL) ./mkinstalldirs $@ 2097 -chmod $(DIRMOD) $@ 2098 2099# create links from various names to vim. This is only done when the links 2100# (or executables with the same name) don't exist yet. 2101installlinks: $(GUI_TARGETS) \ 2102 $(DEST_BIN)/$(EXTARGET) \ 2103 $(DEST_BIN)/$(VIEWTARGET) \ 2104 $(DEST_BIN)/$(RVIMTARGET) \ 2105 $(DEST_BIN)/$(RVIEWTARGET) \ 2106 $(INSTALLVIMDIFF) 2107 2108installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2109 $(DEST_BIN)/$(GVIEWTARGET) \ 2110 $(DEST_BIN)/$(RGVIMTARGET) \ 2111 $(DEST_BIN)/$(RGVIEWTARGET) \ 2112 $(DEST_BIN)/$(EVIMTARGET) \ 2113 $(DEST_BIN)/$(EVIEWTARGET) \ 2114 $(INSTALLGVIMDIFF) 2115 2116installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2117installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2118 2119$(DEST_BIN)/$(EXTARGET): 2120 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2121 2122$(DEST_BIN)/$(VIEWTARGET): 2123 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2124 2125$(DEST_BIN)/$(GVIMTARGET): 2126 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2127 2128$(DEST_BIN)/$(GVIEWTARGET): 2129 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2130 2131$(DEST_BIN)/$(RVIMTARGET): 2132 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2133 2134$(DEST_BIN)/$(RVIEWTARGET): 2135 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2136 2137$(DEST_BIN)/$(RGVIMTARGET): 2138 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2139 2140$(DEST_BIN)/$(RGVIEWTARGET): 2141 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2142 2143$(DEST_BIN)/$(VIMDIFFTARGET): 2144 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2145 2146$(DEST_BIN)/$(GVIMDIFFTARGET): 2147 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2148 2149$(DEST_BIN)/$(EVIMTARGET): 2150 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2151 2152$(DEST_BIN)/$(EVIEWTARGET): 2153 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2154 2155# Create links for the manual pages with various names to vim. This is only 2156# done when the links (or manpages with the same name) don't exist yet. 2157 2158INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2159 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2160 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2161 $(GVIMDIFFNAME) $(EVIEWNAME) 2162 2163installmanlinks: 2164 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2165 $(DEST_MAN) $(INSTALLMLARGS) 2166 2167uninstall: uninstall_runtime 2168 -rm -f $(DEST_BIN)/$(VIMTARGET) 2169 -rm -f $(DEST_BIN)/vimtutor 2170 -rm -f $(DEST_BIN)/gvimtutor 2171 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2172 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2173 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2174 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2175 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2176 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2177 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2178 2179# Note: the "rmdir" will fail if any files were added after "make install" 2180uninstall_runtime: 2181 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2182 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2183 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2184 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2185 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2186 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2187 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2188 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2189 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2190 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2191 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2192 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2193 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2194 $(DEST_MAN) $(INSTALLMLARGS) 2195 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2196 $(DEST_MAN_FR) $(INSTALLMLARGS) 2197 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2198 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2199 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2200 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2201 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2202 $(DEST_MAN_IT) $(INSTALLMLARGS) 2203 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2204 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2205 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2206 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2207 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2208 $(DEST_MAN_PL) $(INSTALLMLARGS) 2209 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2210 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2211 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2212 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2213 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2214 $(DEST_MAN_RU) $(INSTALLMLARGS) 2215 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2216 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2217 -rm -f $(DEST_MAN)/xxd.1 2218 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2219 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2220 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2221 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2222 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2223 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2224 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2225 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2226 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2227 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2228 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2229 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2230 -rm -f $(SYS_OPTWIN_FILE) 2231 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2232 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2233 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2234 -rm -rf $(DEST_MACRO) 2235 -rm -rf $(DEST_TUTOR) 2236 -rm -rf $(DEST_SPELL) 2237 -rm -rf $(DEST_TOOLS) 2238 -rm -rf $(DEST_LANG) 2239 -rm -rf $(DEST_KMAP) 2240 -rm -rf $(DEST_COMP) 2241 -rm -f $(DEST_PRINT)/*.ps 2242 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2243 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2244 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2245 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2246 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2247# This will fail when other Vim versions are installed, no worries. 2248 -rmdir $(DEST_VIM) 2249 2250# Clean up all the files that have been produced, except configure's. 2251# We support common typing mistakes for Juergen! :-) 2252clean celan: testclean 2253 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2254 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2255 -rm -f conftest* *~ auto/link.sed 2256 -rm -rf $(APPDIR) 2257 -rm -rf mzscheme_base.c 2258 if test -d $(PODIR); then \ 2259 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2260 fi 2261 2262# Make a shadow directory for compilation on another system or with different 2263# features. 2264SHADOWDIR = shadow 2265 2266shadow: runtime pixmaps 2267 mkdir $(SHADOWDIR) 2268 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs . 2269 mkdir $(SHADOWDIR)/auto 2270 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2271 cd $(SHADOWDIR); rm -f auto/link.sed 2272 cp Makefile configure $(SHADOWDIR) 2273 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2274 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2275 cp config.mk.dist $(SHADOWDIR) 2276 mkdir $(SHADOWDIR)/xxd 2277 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2278 if test -d $(RSRC_DIR); then \ 2279 cd $(SHADOWDIR); \ 2280 ln -s ../infplist.xml .; \ 2281 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2282 fi 2283 mkdir $(SHADOWDIR)/testdir 2284 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2285 ../../testdir/vimrc.unix \ 2286 ../../testdir/*.in \ 2287 ../../testdir/*.vim \ 2288 ../../testdir/*.ok . 2289 2290# Link needed for doing "make install" in a shadow directory. 2291runtime: 2292 -ln -s ../runtime . 2293 2294# Link needed for doing "make" using GTK in a shadow directory. 2295pixmaps: 2296 -ln -s ../pixmaps . 2297 2298# Update the synmenu.vim file with the latest Syntax menu. 2299# This is only needed when runtime/makemenu.vim was changed. 2300menu: ./vim ../runtime/makemenu.vim 2301 ./vim -u ../runtime/makemenu.vim 2302 2303# Start configure from scratch 2304scrub scratch: 2305 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2306 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2307 touch auto/config.h 2308 cp config.mk.dist auto/config.mk 2309 2310distclean: clean scratch 2311 -rm -f tags 2312 2313dist: distclean 2314 @echo 2315 @echo Making the distribution has to be done in the top directory 2316 2317mdepend: 2318 -@rm -f Makefile~ 2319 cp Makefile Makefile~ 2320 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2321 @for i in $(ALL_SRC) ; do \ 2322 echo "$$i" ; \ 2323 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2324 $(CPP) $$i |\ 2325 grep '^# .*"\./.*\.h"' |\ 2326 sort -t'"' -u +1 -2 |\ 2327 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2328 ` >> tmp_make ; \ 2329 done 2330 mv tmp_make Makefile 2331 2332depend: 2333 -@rm -f Makefile~ 2334 cp Makefile Makefile~ 2335 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2336 -for i in $(ALL_SRC); do echo $$i; \ 2337 $(CPP_DEPEND) $$i | \ 2338 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2339 mv tmp_make Makefile 2340 2341# Run lint. Clean up the *.ln files that are sometimes left behind. 2342lint: 2343 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2344 -rm -f *.ln 2345 2346# Check dosinst.c with lint. 2347lintinstall: 2348 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2349 -rm -f dosinst.ln 2350 2351########################################################################### 2352 2353.c.o: 2354 $(CCC) $< 2355 2356auto/if_perl.c: if_perl.xs 2357 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2358 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2359 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2360 2361auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2362 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2363 2364QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2365auto/pathdef.c: Makefile auto/config.mk 2366 -@echo creating $@ 2367 -@echo '/* pathdef.c */' > $@ 2368 -@echo '/* This file is automatically created by Makefile' >> $@ 2369 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2370 -@echo '#include "vim.h"' >> $@ 2371 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2372 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2373 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2374 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2375 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2376 -@if test -n "$(COMPILEDBY)"; then \ 2377 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2378 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2379 -@echo '";' >> $@ 2380 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2381 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2382 -@echo '";' >> $@ 2383 -@sh $(srcdir)/pathdef.sh 2384 2385# All the object files are put in the "objects" directory. Since not all make 2386# commands understand putting object files in another directory, it must be 2387# specified for each file separately. 2388 2389objects: 2390 mkdir objects 2391 2392objects/blowfish.o: blowfish.c 2393 $(CCC) -o $@ blowfish.c 2394 2395objects/buffer.o: buffer.c 2396 $(CCC) -o $@ buffer.c 2397 2398objects/charset.o: charset.c 2399 $(CCC) -o $@ charset.c 2400 2401objects/diff.o: diff.c 2402 $(CCC) -o $@ diff.c 2403 2404objects/digraph.o: digraph.c 2405 $(CCC) -o $@ digraph.c 2406 2407objects/edit.o: edit.c 2408 $(CCC) -o $@ edit.c 2409 2410objects/eval.o: eval.c 2411 $(CCC) -o $@ eval.c 2412 2413objects/ex_cmds.o: ex_cmds.c 2414 $(CCC) -o $@ ex_cmds.c 2415 2416objects/ex_cmds2.o: ex_cmds2.c 2417 $(CCC) -o $@ ex_cmds2.c 2418 2419objects/ex_docmd.o: ex_docmd.c 2420 $(CCC) -o $@ ex_docmd.c 2421 2422objects/ex_eval.o: ex_eval.c 2423 $(CCC) -o $@ ex_eval.c 2424 2425objects/ex_getln.o: ex_getln.c 2426 $(CCC) -o $@ ex_getln.c 2427 2428objects/fileio.o: fileio.c 2429 $(CCC) -o $@ fileio.c 2430 2431objects/fold.o: fold.c 2432 $(CCC) -o $@ fold.c 2433 2434objects/getchar.o: getchar.c 2435 $(CCC) -o $@ getchar.c 2436 2437objects/hardcopy.o: hardcopy.c 2438 $(CCC) -o $@ hardcopy.c 2439 2440objects/hashtab.o: hashtab.c 2441 $(CCC) -o $@ hashtab.c 2442 2443objects/gui.o: gui.c 2444 $(CCC) -o $@ gui.c 2445 2446objects/gui_at_fs.o: gui_at_fs.c 2447 $(CCC) -o $@ gui_at_fs.c 2448 2449objects/gui_at_sb.o: gui_at_sb.c 2450 $(CCC) -o $@ gui_at_sb.c 2451 2452objects/gui_athena.o: gui_athena.c 2453 $(CCC) -o $@ gui_athena.c 2454 2455objects/gui_beval.o: gui_beval.c 2456 $(CCC) -o $@ gui_beval.c 2457 2458objects/gui_gtk.o: gui_gtk.c 2459 $(CCC) -o $@ gui_gtk.c 2460 2461objects/gui_gtk_f.o: gui_gtk_f.c 2462 $(CCC) -o $@ gui_gtk_f.c 2463 2464objects/gui_gtk_x11.o: gui_gtk_x11.c 2465 $(CCC) -o $@ gui_gtk_x11.c 2466 2467objects/gui_motif.o: gui_motif.c 2468 $(CCC) -o $@ gui_motif.c 2469 2470objects/gui_xmdlg.o: gui_xmdlg.c 2471 $(CCC) -o $@ gui_xmdlg.c 2472 2473objects/gui_xmebw.o: gui_xmebw.c 2474 $(CCC) -o $@ gui_xmebw.c 2475 2476objects/gui_x11.o: gui_x11.c 2477 $(CCC) -o $@ gui_x11.c 2478 2479objects/gui_photon.o: gui_photon.c 2480 $(CCC) -o $@ gui_photon.c 2481 2482objects/gui_mac.o: gui_mac.c 2483 $(CCC) -o $@ gui_mac.c 2484 2485objects/hangulin.o: hangulin.c 2486 $(CCC) -o $@ hangulin.c 2487 2488objects/if_cscope.o: if_cscope.c 2489 $(CCC) -o $@ if_cscope.c 2490 2491objects/if_xcmdsrv.o: if_xcmdsrv.c 2492 $(CCC) -o $@ if_xcmdsrv.c 2493 2494objects/if_lua.o: if_lua.c 2495 $(CCC) $(LUA_CFLAGS) -o $@ if_lua.c 2496 2497objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2498 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2499 2500mzscheme_base.c: 2501 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2502 2503objects/if_perl.o: auto/if_perl.c 2504 $(CCC) $(PERL_CFLAGS) -o $@ auto/if_perl.c 2505 2506objects/if_perlsfio.o: if_perlsfio.c 2507 $(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c 2508 2509objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2510 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/config.c \ 2511 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2512 2513objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2514 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2515 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2516 $(PYTHON_GETPATH_CFLAGS) 2517 2518objects/py3_config.o: $(PYTHON3_CONFDIR)/config.c 2519 $(CCC) $(PYTHON3_CFLAGS) -o $@ $(PYTHON3_CONFDIR)/config.c \ 2520 -I$(PYTHON3_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2521 2522objects/if_python.o: if_python.c if_py_both.h 2523 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2524 2525objects/if_python3.o: if_python3.c if_py_both.h 2526 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2527 2528objects/if_ruby.o: if_ruby.c 2529 $(CCC) -o $@ if_ruby.c 2530 2531objects/if_sniff.o: if_sniff.c 2532 $(CCC) -o $@ if_sniff.c 2533 2534objects/if_tcl.o: if_tcl.c 2535 $(CCC) -o $@ if_tcl.c 2536 2537objects/integration.o: integration.c 2538 $(CCC) -o $@ integration.c 2539 2540objects/main.o: main.c 2541 $(CCC) -o $@ main.c 2542 2543objects/mark.o: mark.c 2544 $(CCC) -o $@ mark.c 2545 2546objects/memfile.o: memfile.c 2547 $(CCC) -o $@ memfile.c 2548 2549objects/memline.o: memline.c 2550 $(CCC) -o $@ memline.c 2551 2552objects/menu.o: menu.c 2553 $(CCC) -o $@ menu.c 2554 2555objects/message.o: message.c 2556 $(CCC) -o $@ message.c 2557 2558objects/misc1.o: misc1.c 2559 $(CCC) -o $@ misc1.c 2560 2561objects/misc2.o: misc2.c 2562 $(CCC) -o $@ misc2.c 2563 2564objects/move.o: move.c 2565 $(CCC) -o $@ move.c 2566 2567objects/mbyte.o: mbyte.c 2568 $(CCC) -o $@ mbyte.c 2569 2570objects/normal.o: normal.c 2571 $(CCC) -o $@ normal.c 2572 2573objects/ops.o: ops.c 2574 $(CCC) -o $@ ops.c 2575 2576objects/option.o: option.c 2577 $(CCC) -o $@ option.c 2578 2579objects/os_beos.o: os_beos.c 2580 $(CCC) -o $@ os_beos.c 2581 2582objects/os_qnx.o: os_qnx.c 2583 $(CCC) -o $@ os_qnx.c 2584 2585objects/os_macosx.o: os_macosx.m 2586 $(CCC) -o $@ os_macosx.m 2587 2588objects/os_mac_conv.o: os_mac_conv.c 2589 $(CCC) -o $@ os_mac_conv.c 2590 2591objects/os_unix.o: os_unix.c 2592 $(CCC) -o $@ os_unix.c 2593 2594objects/pathdef.o: auto/pathdef.c 2595 $(CCC) -o $@ auto/pathdef.c 2596 2597objects/pty.o: pty.c 2598 $(CCC) -o $@ pty.c 2599 2600objects/popupmnu.o: popupmnu.c 2601 $(CCC) -o $@ popupmnu.c 2602 2603objects/quickfix.o: quickfix.c 2604 $(CCC) -o $@ quickfix.c 2605 2606objects/regexp.o: regexp.c 2607 $(CCC) -o $@ regexp.c 2608 2609objects/screen.o: screen.c 2610 $(CCC) -o $@ screen.c 2611 2612objects/search.o: search.c 2613 $(CCC) -o $@ search.c 2614 2615objects/sha256.o: sha256.c 2616 $(CCC) -o $@ sha256.c 2617 2618objects/spell.o: spell.c 2619 $(CCC) -o $@ spell.c 2620 2621objects/syntax.o: syntax.c 2622 $(CCC) -o $@ syntax.c 2623 2624objects/tag.o: tag.c 2625 $(CCC) -o $@ tag.c 2626 2627objects/term.o: term.c 2628 $(CCC) -o $@ term.c 2629 2630objects/ui.o: ui.c 2631 $(CCC) -o $@ ui.c 2632 2633objects/undo.o: undo.c 2634 $(CCC) -o $@ undo.c 2635 2636objects/window.o: window.c 2637 $(CCC) -o $@ window.c 2638 2639objects/workshop.o: workshop.c 2640 $(CCC) -o $@ workshop.c 2641 2642objects/wsdebug.o: wsdebug.c 2643 $(CCC) -o $@ wsdebug.c 2644 2645objects/netbeans.o: netbeans.c 2646 $(CCC) -o $@ netbeans.c 2647 2648Makefile: 2649 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2650 2651############################################################################### 2652### MacOS X installation 2653### 2654### This installs a runnable Vim.app in $(prefix) 2655 2656REZ = /Developer/Tools/Rez 2657RESDIR = $(APPDIR)/Contents/Resources 2658VERSION = $(VIMMAJOR).$(VIMMINOR) 2659 2660### Common flags 2661M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2662 -DAPP_VER=$(VERSION) 2663 2664install_macosx: gui_bundle 2665# Remove the link to the runtime dir, don't want to copy all of that. 2666 -rm $(RESDIR)/vim/runtime 2667 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2668# Generate the help tags file now, it won't work with "make installruntime". 2669 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2670# Install the runtime files. Recursive! 2671 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2672# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2673 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2674 VIMEXE=$$srcdir/$(VIMTARGET) \ 2675 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2676 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2677 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2678 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2679 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2680# Put the link back. 2681 ln -s `pwd`/../runtime $(RESDIR)/vim 2682# Copy rgb.txt, Mac doesn't always have X11 2683 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2684# TODO: Create the vimtutor and/or gvimtutor application. 2685 2686gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2687 bundle-language 2688 2689$(RESDIR): 2690 mkdir -p $@ 2691 2692bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2693# Make a link to the runtime directory, so that we can try out the executable 2694# without installing it. 2695 mkdir -p $(RESDIR)/vim 2696 -ln -s `pwd`/../runtime $(RESDIR)/vim 2697 2698bundle-executable: $(VIMTARGET) 2699 mkdir -p $(APPDIR)/Contents/MacOS 2700 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2701 2702bundle-info: bundle-dir 2703 @echo "Creating PkgInfo" 2704 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2705 @echo "Creating Info.plist" 2706 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2707 2708bundle-resource: bundle-dir bundle-rsrc 2709 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2710 2711### Classic resources 2712# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2713# This file is also required for OS X Vim. 2714bundle-rsrc: os_mac.rsr.hqx 2715 @echo "Creating resource fork" 2716 python dehqx.py $< 2717 rm -f gui_mac.rsrc 2718 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2719 2720# po/Make_osx.pl says something about generating a Mac message file 2721# for Ukrananian. Would somebody using Mac OS X in Ukranian 2722# *really* be upset that Carbon Vim was not localised in 2723# Ukranian? 2724# 2725#bundle-language: bundle-dir po/Make_osx.pl 2726# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2727bundle-language: bundle-dir 2728 2729$(APPDIR)/Contents: 2730 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2731 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2732 2733 2734############################################################################### 2735### (automatically generated by 'make depend') 2736### Dependencies: 2737objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 2738 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2739 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2740 globals.h farsi.h arabic.h 2741objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2742 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2743 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2744 arabic.h version.h 2745objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2746 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2747 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2748 arabic.h 2749objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2750 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2751 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2752 arabic.h 2753objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2754 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2755 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2756 arabic.h 2757objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2758 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2759 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2760 arabic.h 2761objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2762 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2763 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2764 arabic.h version.h 2765objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2766 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2767 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2768 arabic.h version.h 2769objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2770 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2771 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2772 globals.h farsi.h arabic.h version.h 2773objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2774 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2775 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2776 globals.h farsi.h arabic.h 2777objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2778 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2779 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2780 arabic.h 2781objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2782 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2783 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2784 globals.h farsi.h arabic.h 2785objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2786 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2787 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2788 arabic.h 2789objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2790 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2791 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2792 arabic.h 2793objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2794 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2795 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2796 arabic.h 2797objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2798 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2799 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2800 globals.h farsi.h arabic.h version.h 2801objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2802 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2803 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2804 arabic.h 2805objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2806 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2807 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2808 globals.h farsi.h arabic.h if_cscope.h 2809objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2810 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2811 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2812 globals.h farsi.h arabic.h version.h 2813objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2814 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2815 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2816 arabic.h farsi.c arabic.c 2817objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2818 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2819 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2820 arabic.h 2821objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2822 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2823 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2824 arabic.h 2825objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2826 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2827 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2828 arabic.h 2829objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2830 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2831 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2832 arabic.h 2833objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2834 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2835 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2836 arabic.h 2837objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2838 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2839 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2840 arabic.h version.h 2841objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2842 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2843 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2844 arabic.h 2845objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2846 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2847 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2848 arabic.h 2849objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2850 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2851 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2852 arabic.h 2853objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2854 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2855 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2856 arabic.h 2857objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2858 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2859 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2860objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2861 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2862 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2863 arabic.h 2864objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2865 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2866 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2867 arabic.h if_mzsch.h os_unixx.h 2868objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2869 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2870 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2871 globals.h farsi.h arabic.h 2872objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 2873 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2874 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2875 globals.h farsi.h arabic.h 2876objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2877 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2878 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2879 globals.h farsi.h arabic.h 2880objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2881 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2882 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2883 arabic.h 2884objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2885 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2886 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2887 arabic.h 2888objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2889 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2890 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2891 arabic.h 2892objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2893 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2894 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2895 arabic.h 2896objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2897 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2898 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2899 arabic.h 2900objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2901 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2902 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2903 arabic.h 2904objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2905 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2906 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2907objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2908 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2909 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2910 arabic.h 2911objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2912 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2913 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2914objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2915 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2916 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2917 arabic.h 2918objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2919 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2920 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2921 arabic.h version.h 2922objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2923 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2924 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2925 arabic.h 2926objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2927 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2928 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2929objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 2930 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2931 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2932 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 2933objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2934 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2935 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2936 globals.h farsi.h arabic.h gui_gtk_f.h 2937objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2938 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2939 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2940 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 2941 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 2942 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 2943 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2944 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2945 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2946 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2947 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2948 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2949 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2950 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2951 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2952 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2953 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2954 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2955 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2956 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2957 ../pixmaps/tb_minwidth.xpm 2958objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 2959 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2960 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2961 globals.h farsi.h arabic.h 2962objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 2963 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2964 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2965 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 2966objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2967 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2968 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2969 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 2970 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 2971 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 2972 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2973 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2974 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2975 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2976 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2977 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2978 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2979 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2980 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2981 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2982 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2983 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2984 ../pixmaps/tb_minwidth.xpm 2985objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2986 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2987 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2988 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2989 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2990objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2991 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2992 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2993 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 2994 ../runtime/vim48x48.xpm 2995objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 2996 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2997 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2998 globals.h farsi.h arabic.h gui_at_sb.h 2999objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3000 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3001 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3002 globals.h farsi.h arabic.h gui_at_sb.h 3003objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3004 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3005 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3006objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3007 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3008 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3009 globals.h farsi.h arabic.h 3010objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3011 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3012 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3013 arabic.h 3014objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3015 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3016 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3017 globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3018objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3019 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3020 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3021 globals.h farsi.h arabic.h 3022objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3023 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3024 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3025 globals.h farsi.h arabic.h 3026objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3027 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3028 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3029 globals.h farsi.h arabic.h if_py_both.h 3030objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3031 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3032 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3033 globals.h farsi.h arabic.h if_py_both.h 3034objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3035 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3036 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3037 arabic.h 3038objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3039 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3040 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3041 arabic.h version.h 3042objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3043 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3044 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3045 globals.h farsi.h arabic.h os_unixx.h 3046objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3047 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3048 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3049 globals.h farsi.h arabic.h 3050objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3051 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3052 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3053 proto.h globals.h farsi.h arabic.h version.h workshop.h 3054objects/wsdebug.o: wsdebug.c 3055objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3056 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3057 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3058 globals.h farsi.h arabic.h integration.h 3059objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3060 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3061 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3062 globals.h farsi.h arabic.h version.h 3063
