1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME & KDE and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-perlinterp for Perl interpreter 42# --enable-pythoninterp for Python interpreter 43# --enable-rubyinterp for Ruby interpreter 44# --enable-tclinterp for Tcl interpreter 45# --enable-cscope for Cscope interface 46# - Uncomment one of the lines with --with-features= to enable a set of 47# features (but not the interfaces just mentioned). 48# - Uncomment the line with --disable-acl to disable ACL support even 49# though your system supports it. 50# - Uncomment the line with --disable-gpm to disable gpm support 51# even though you have gpm libraries and includes 52# - Uncomment one of the lines with CFLAGS and/or CC if you have 53# something very special or want to tune the optimizer. 54# - Search for the name of your system to see if it needs anything 55# special. 56# - A few versions of make use '.include "file"' instead of 'include 57# file'. Adjust the include line below if yours does. 58# 59# 2. Edit feature.h {{{1 60# Only if you do not agree with the default compile features, e.g.: 61# - you want Vim to be as vi compatible as it can be 62# - you want to use Emacs tags files 63# - you want right-to-left editing (Hebrew) 64# - you want 'langmap' support (Greek) 65# - you want to remove features to make Vim smaller 66# 67# 3. "make" {{{1 68# Will first run ./configure with the options in this file. Then it will 69# start make again on this Makefile to do the compiling. You can also do 70# this in two steps with: 71# make config 72# make 73# The configuration phase creates/overwrites auto/config.h and 74# auto/config.mk. 75# The configure script is created with "make autoconf". It can detect 76# different features of your system and act accordingly. However, it is 77# not correct for all systems. Check this: 78# - If you have X windows, but configure could not find it or reported 79# another include/library directory then you wanted to use, you have 80# to set CONF_OPT_X below. You might also check the installation of 81# xmkmf. 82# - If you have --enable-gui=motif and have Motif on your system, but 83# configure reports "checking for location of gui... <not found>", you 84# have to set GUI_INC_LOC and GUI_LIB_LOC below. 85# If you changed something, do this to run configure again: 86# make reconfig 87# 88# - If you do not trust the automatic configuration code, then inspect 89# auto/config.h and auto/config.mk, before starting the actual build 90# phase. If possible edit this Makefile, rather than auto/config.mk -- 91# especially look at the definition of VIMLOC below. Note that the 92# configure phase overwrites auto/config.mk and auto/config.h again. 93# - If you get error messages, find out what is wrong and try to correct 94# it in this Makefile. You may need to do "make reconfig" when you 95# change anything that configure uses (e.g. switching from an old C 96# compiler to an ANSI C compiler). Only when auto/configure does 97# something wrong you may need to change one of the other files. If 98# you find a clean way to fix the problem, consider sending a note to 99# the author of autoconf ([email protected]) or Vim 100# ([email protected]). Don't bother to do that when you made a hack 101# solution for a non-standard system. 102# 103# 4. "make test" {{{1 104# This is optional. This will run Vim scripts on a number of test 105# files, and compare the produced output with the expected output. 106# If all is well, you will get the "ALL DONE" message in the end. See 107# below (search for "/^test"). 108# 109# 5. "make install" {{{1 110# If the new Vim seems to be working OK you can install it and the 111# documentation in the appropriate location. The default is 112# "/usr/local". Change "prefix" below to change the location. 113# "auto/pathdef.c" will be compiled again after changing this to make 114# the executable know where the help files are located. 115# Note that any existing executable is removed or overwritten. If you 116# want to keep it you will have to make a backup copy first. 117# The runtime files are in a different directory for each version. You 118# might want to delete an older version. 119# If you don't want to install everything, there are other targets: 120# make installvim only installs Vim, not the tools 121# make installvimbin only installs the Vim executable 122# make installruntime installs most of the runtime files 123# make installrtbase only installs the Vim help and 124# runtime files 125# make installlinks only installs the Vim binary links 126# make installmanlinks only installs the Vim manpage links 127# make installmacros only installs the Vim macros 128# make installtutorbin only installs the Vim tutor program 129# make installtutor only installs the Vim tutor files 130# make installspell only installs the spell files 131# make installtools only installs xxd 132# If you install Vim, not to install for real but to prepare a package 133# or RPM, set DESTDIR to the root of the tree. 134# 135# 6. Use Vim until a new version comes out. {{{1 136# 137# 7. "make uninstall_runtime" {{{1 138# Will remove the runtime files for the current version. This is safe 139# to use while another version is being used, only version-specific 140# files will be deleted. 141# To remove the runtime files of another version: 142# make uninstall_runtime VIMRTDIR=/vim54 143# If you want to delete all installed files, use: 144# make uninstall 145# Note that this will delete files that have the same name for any 146# version, thus you might need to do a "make install" soon after this. 147# Be careful not to remove a version of Vim that is still being used! 148# To find out which files and directories will be deleted, use: 149# make -n uninstall 150# }}} 151# 152### This Makefile has been successfully tested on many systems. {{{ 153### Only the ones that require special options are mentioned here. 154### Check the (*) column for remarks, listed below. 155### Later code changes may cause small problems, otherwise Vim is supposed to 156### compile and run without problems. 157 158#system: configurations: version (*) tested by: 159#------------- ------------------------ ------- - ---------- 160#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 161#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 162#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 163#AIX 4.2.1 cc 5.2k (C) Will Fiveash 164#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 165#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 166#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 167#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 168#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 169#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 170#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 171#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 172#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 173#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 174#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 175#Irix 6.4 cc ? 5.0m (S) Rick Sayre 176#Irix 6.5 cc ? 6.0 (S) David Harrison 177#Irix 64 bit 4.5 (K) Jon Wright 178#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 179#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 180#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 181#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 182#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 183#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 184#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 185#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 186#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 187#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 188#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 189#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 190#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 191#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 192#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 193#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 194#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 195#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 196#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 197#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 198#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 199#Solaris with -lthread 5.5 (W) K. Nagano 200#Solaris gcc (b) Riccardo 201#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 202#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 203#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 204#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 205#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 206#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 207# }}} 208 209# (*) Remarks: {{{ 210# 211# (1) Uncomment line below for shlicc2 212# (2) HPUX with compile problems or wrong digraphs, uncomment line below 213# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 214# And add "-lXpm" to MOTIF_LIBS2. 215# (4) For cc the optimizer must be disabled (use CFLAGS= after running 216# configure) (symptom: ":set termcap" output looks weird). 217# (5) Compiler may need extra argument, see below. 218# (6) See below for a few lines to uncomment 219# (7) See below for lines which enable the use of clcc 220# (8) Needs some EXTRA_LIBS, search for Unisys below 221# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 222# (A) May need EXTRA_LIBS, see below 223# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 224# (C) Force the use of curses instead of termcap, see below. 225# (D) Uncomment lines below for QNX 226# (E) You might want to use termlib instead of termcap, see below. 227# (F) See below for instructions. 228# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 229# Sun cursus library instead. 230# (H) See line for EXTRA_LIBS below. 231# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 232# (J) If you get undefined symbols, see below for a solution. 233# (K) See lines to uncomment below for machines with 64 bit pointers. 234# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 235# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 236# characters instead of one). 237# (N) SCO with decmouse. 238# (O) LynxOS needs EXTRA_LIBS, see below. 239# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 240# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 241# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 242# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 243# (T) See ../doc/os_beos.txt. 244# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 245# detection, since the configure script runs into an error when it 246# detects Python (probably because of the bash shell). 247# (V) See lines to uncomment below. 248# (X) Need to use the .include "auto/config.mk" line below 249# (Y) See line with c89 below 250# (Z) See lines with cc or c89 below 251# (a) See line with EXTRA_LIBS below. 252# (b) When using gcc with the Solaris linker, make sure you don't use GNU 253# strip, otherwise the binary may not run: "Cannot find ELF". 254# (x) When you get warnings for precompiled header files, run 255# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 256# }}} 257 258 259#DO NOT CHANGE the next line, we need it for configure to find the compiler 260#instead of using the default from the "make" program. 261#Use a line further down to change the value for CC. 262CC= 263 264# Change and use these defines if configure cannot find your Motif stuff. 265# Unfortunately there is no "standard" location for Motif. {{{ 266# These defines can contain a single directory (recommended) or a list of 267# directories (for when you are working with several systems). The LAST 268# directory that exists is used. 269# When changed, run "make reconfig" next! 270#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 271#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 272### Use these two lines for Infomagic Motif (3) 273#GUI_INC_LOC = -I/usr/X11R6/include 274#GUI_LIB_LOC = -L/usr/X11R6/lib 275# }}} 276 277######################## auto/config.mk ######################## {{{1 278# At this position auto/config.mk is included. When starting from the 279# distribution it is almost empty. After running auto/configure it contains 280# settings that have been discovered for your system. Settings below this 281# include override settings in auto/config.mk! 282 283# Note: if auto/config.mk is lost somehow (e.g., because configure was 284# interrupted), create an empty auto/config.mk file and do "make config". 285 286# (X) How to include auto/config.mk depends on the version of "make" you have, 287# if the current choice doesn't work, try the other one. 288 289include auto/config.mk 290#.include "auto/config.mk" 291CClink = $(CC) 292 293#}}} 294 295# Include the configuration choices first, so we can override everything 296# below. As shipped, this file contains a target that causes to run 297# configure. Once configure was run, this file contains a list of 298# make variables with predefined values instead. Thus any second invocation 299# of make, will build Vim. 300 301# CONFIGURE - configure arguments {{{1 302# You can give a lot of options to configure. 303# Change this to your desire and do 'make config' afterwards 304 305# examples (can only use one!): 306#CONF_ARGS = --exec-prefix=/usr 307#CONF_ARGS = --with-vim-name=vim6 --with-ex-name=ex6 --with-view-name=view6 308#CONF_ARGS = --with-global-runtime=/etc/vim 309 310# Use this one if you distribute a modified version of Vim. 311#CONF_ARGS = --with-modified-by="John Doe" 312 313# GUI - For creating Vim with GUI (gvim) (B) 314# Uncomment this line when you don't want to get the GUI version, although you 315# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 316# at all. 317#CONF_OPT_GUI = --disable-gui 318 319# Uncomment one of these lines if you have that GUI but don't want to use it. 320# The automatic check will use another one that can be found 321# Gnome is disabled by default, it may cause trouble. 322#CONF_OPT_GUI = --disable-gtk-check 323#CONF_OPT_GUI = --disable-gtk2-check 324#CONF_OPT_GUI = --enable-gnome-check 325#CONF_OPT_GUI = --enable-gnome2-check 326#CONF_OPT_GUI = --disable-motif-check 327#CONF_OPT_GUI = --disable-athena-check 328#CONF_OPT_GUI = --disable-nextaw-check 329 330# Uncomment one of these lines to select a specific GUI to use. 331# When using "yes" or nothing, configure will use the first one found: GTK+, 332# Motif or Athena. 333# 334# GTK versions that are known not to work 100% are rejected. 335# Use "--disable-gtktest" to accept them anyway. 336# 337# GNOME means GTK with Gnome support. If using GTK, then GNOME will 338# automatically be used if it is found. If you have GNOME, but do not want to 339# use it (e.g., want a GTK-only version), then use --enable-gui=gtk. 340# 341# KDE doesn't fully work, unfortunately. See the todo list. 342# 343# If the selected GUI isn't found, the GUI is disabled automatically 344#CONF_OPT_GUI = --enable-gui=gtk 345#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest 346#CONF_OPT_GUI = --enable-gui=gtk2 347#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 348#CONF_OPT_GUI = --enable-gui=gnome 349#CONF_OPT_GUI = --enable-gui=gnome2 350#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 351#CONF_OPT_GUI = --enable-gui=kde 352#CONF_OPT_GUI = --enable-gui=motif 353#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 354#CONF_OPT_GUI = --enable-gui=athena 355#CONF_OPT_GUI = --enable-gui=nextaw 356 357# DARWIN - detecting Mac OS X 358# Uncomment this line when you want to compile a Unix version of Vim on 359# Darwin. None of the Mac specific options or files will be used. 360#CONF_OPT_DARWIN = --disable-darwin 361 362# PERL 363# Uncomment this when you want to include the Perl interface. 364# The Perl option sometimes causes problems, because it adds extra flags 365# to the command line. If you see strange flags during compilation, check in 366# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 367# the next line. 368# When you get an error for a missing "perl.exp" file, try creating an emtpy 369# one: "touch perl.exp". 370# This requires at least "small" features, "tiny" doesn't work. 371#CONF_OPT_PERL = --enable-perlinterp 372 373# PYTHON 374# Uncomment this when you want to include the Python interface. 375# NOTE: This may cause threading to be enabled, which has side effects (such 376# as using different libraries and debugging becomes more difficult). 377# NOTE: Using this together with Perl may cause a crash in initialization. 378#CONF_OPT_PYTHON = --enable-pythoninterp 379 380# TCL 381# Uncomment this when you want to include the Tcl interface. 382#CONF_OPT_TCL = --enable-tclinterp 383#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 384 385# RUBY 386# Uncomment this when you want to include the Ruby interface. 387#CONF_OPT_RUBY = --enable-rubyinterp 388 389# MZSCHEME 390# Uncomment this when you want to include the MzScheme interface. 391#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 392# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 393#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 394#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 395#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 396 397# CSCOPE 398# Uncomment this when you want to include the Cscope interface. 399#CONF_OPT_CSCOPE = --enable-cscope 400 401# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 402#CONF_OPT_WORKSHOP = --enable-workshop 403 404# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 405# Motif version must have XPM libraries (see |workshop-xpm|). 406# Uncomment this when you do not want the netbeans interface. 407#CONF_OPT_NETBEANS = --disable-netbeans 408 409# SNIFF - Include support for SNiFF+. 410#CONF_OPT_SNIFF = --enable-sniff 411 412# MULTIBYTE - To edit multi-byte characters. 413# Uncomment this when you want to edit a multibyte language. 414# It's automatically enabled with big features or IME support. 415# Note: Compile on a machine where setlocale() actually works, otherwise the 416# configure tests may fail. 417#CONF_OPT_MULTIBYTE = --enable-multibyte 418 419# NLS - National Language Support 420# Uncomment this when you do not want to support translated messages, even 421# though configure can find support for it. 422#CONF_OPT_NLS = --disable-nls 423 424# XIM - X Input Method. Special character input support for X11 (Chinese, 425# Japanese, special symbols, etc). Also needed for dead-key support. 426# When omitted it's automatically enabled for the X-windows GUI. 427# HANGUL - Input Hangul (Korean) language using internal routines. 428# Uncomment one of these when you want to input a multibyte language. 429#CONF_OPT_INPUT = --enable-xim 430#CONF_OPT_INPUT = --disable-xim 431#CONF_OPT_INPUT = --enable-hangulinput 432 433# FONTSET - X fontset support for output of languages with many characters. 434# Uncomment this when you want to output a multibyte language. 435#CONF_OPT_OUTPUT = --enable-fontset 436 437# ACL - Uncomment this when you do not want to include ACL support, even 438# though your system does support it. E.g., when it's buggy. 439#CONF_OPT_ACL = --disable-acl 440 441# gpm - For mouse support on Linux console via gpm 442# Uncomment this when you do not want to include gpm support, even 443# though you have gpm libraries and includes 444#CONF_OPT_GPM = --disable-gpm 445 446# FEATURES - For creating Vim with more or less features 447# Uncomment one of these lines when you want to include few to many features. 448# The default is "normal". 449#CONF_OPT_FEAT = --with-features=tiny 450#CONF_OPT_FEAT = --with-features=small 451#CONF_OPT_FEAT = --with-features=normal 452#CONF_OPT_FEAT = --with-features=big 453#CONF_OPT_FEAT = --with-features=huge 454 455# COMPILED BY - For including a specific e-mail address for ":version". 456#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 457 458# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 459# (otherwise Vim configure will try to include xterm titlebar access) 460# Also disable the GUI above, otherwise it will be included anyway. 461# When both GUI and X11 have been disabled this may save about 15% of the 462# code and make Vim startup quicker. 463#CONF_OPT_X = --without-x 464 465# X WINDOWS DIRECTORY - specify X directories 466# If configure can't find you X stuff, or if you have multiple X11 derivatives 467# installed, you may wish to specify which one to use. 468# Select nothing to let configure choose. 469# This here selects openwin (as found on sun). 470#XROOT = /usr/openwin 471#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 472 473# X11 Session Management Protocol support 474# Vim will try to use XSMP to catch the user logging out if there are unsaved 475# files. Uncomment this line to disable that (it prevents vim trying to open 476# communications with the session manager). 477#CONF_OPT_XSMP = --disable-xsmp 478 479# You may wish to include xsmp but use exclude xsmp-interact if the logout 480# XSMP functionality does not work well with your session-manager (at time of 481# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 482# applications after Vim has cancelled a logout (until Vim quits). This 483# *might* be the Vim code, but is more likely a bug in early GNOME-1. 484# This disables the dialog that asks you if you want to save files or not. 485#CONF_OPT_XSMP = --disable-xsmp-interact 486 487# COMPILER - Name of the compiler {{{1 488# The default from configure will mostly be fine, no need to change this, just 489# an example. If a compiler is defined here, configure will use it rather than 490# probing for one. It is dangerous to change this after configure was run. 491# Make will use your choice then -- but beware: Many things may change with 492# another compiler. It is wise to run 'make reconfig' to start all over 493# again. 494#CC = cc 495#CC = gcc 496 497# COMPILER FLAGS - change as you please. Either before running {{{1 498# configure or afterwards. For examples see below. 499# When using -g with some older versions of Linux you might get a 500# statically linked executable. 501# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 502#CFLAGS = -g 503#CFLAGS = -O 504 505# Optimization limits - depends on the compiler. Automatic check in configure 506# doesn't work very well, because many compilers only give a warning for 507# unrecognized arguments. 508#CFLAGS = -O -OPT:Olimit=2600 509#CFLAGS = -O -Olimit 2000 510#CFLAGS = -O -FOlimit,2000 511 512# Often used for GCC: mixed optimizing, lot of optimizing, debugging 513#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 514#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 515#CFLAGS = -g -Wall -Wmissing-prototypes 516#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 517#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 518#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 519 520# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 521# allocated memory (and makes every malloc()/free() very slow). 522# Electric Fence is free (search ftp sites). 523# You may want to set the EF_PROTECT_BELOW environment variable to check the 524# other side of allocated memory. 525# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 526# as root: sysctl -w vm.max_proc_mmap=30000 527#EXTRA_LIBS = /usr/local/lib/libefence.a 528 529# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 530#PURIFY = purify 531# }}} 532 533# LINT - for running lint 534LINT_OPTIONS = -beprxzF 535 536# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 537# Might not work with GUI or Perl. 538# Need to recompile everything after changing this: "make clean" "make". 539#PROFILE_CFLAGS = -pg -g 540#PROFILE_LIBS = -pg 541 542# MEMORY LEAK DETECTION 543# Requires installing the ccmalloc library. 544# Configuration is in the .ccmalloc file. 545# Doesn't work very well, since memory linked to from global variables 546# (indirectly) is also marked as leaked memory. 547#PROFILE_CFLAGS = -DEXITFREE 548#PROFILE_LIBS = -lccmalloc 549 550##################################################### 551### Specific systems, check if yours is listed! ### {{{ 552##################################################### 553 554### Uncomment things here only if the values chosen by configure are wrong. 555### It's better to adjust configure.in and "make autoconf", if you can! 556### Then send the required changes to configure.in to the bugs list. 557 558### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 559### 560#CC = shlicc2 561#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 562 563### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 564### The first probably works on all systems 565### The second should work a bit better on newer systems 566### The third should work a bit better on HPUX 11.11 567### Information provided by: Richard Allen <[email protected]> 568#CC = c89 -D_HPUX_SOURCE 569#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 570#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 571 572### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 573### when the default (ISO) digraphs look completely wrong. 574### After changing this do "touch digraph.c; make". 575#EXTRA_DEFS = -DHPUX_DIGRAPHS 576 577### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 578### is too small to compile many routines. It produces too much defining 579### and no space errors. 580### Uncomment the following to specify a larger macro definition table. 581#CFLAGS = -Wp,-H256000 582 583### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 584### libraries in /usr/lib instead of /lib (avoiding transition links). 585### Information provided by: David Green 586#XROOT = /usr 587#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 588#GUI_INC_LOC = -I/usr/include/Motif1.2 589#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 590 591### (5) AIX 4.1.4 with cc 592#CFLAGS = -O -qmaxmem=8192 593 594### AIX with c89 (Walter Briscoe) 595#CC = c89 596#CPPFLAGS = -D_ALL_SOURCE 597 598### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 599# needed to avoid a problem where strings.h gets included 600#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 601 602### (W) Solaris with multi-threaded libraries (-lthread): 603### If suspending doesn't work properly, try using this line: 604#EXTRA_DEFS = -D_REENTRANT 605 606### (7) Solaris 2.4/2.5 with Centerline compiler 607#CC = clcc 608#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 609#CFLAGS = -O 610 611### (9) Solaris 2.x with cc (SunPro), using Athena. 612### Only required for compiling gui_at_sb.c. 613### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 614### Use one of the lines (either Full ANSI or no ANSI at all) 615#CFLAGS = $(CFLAGS) -Xc 616#CFLAGS = $(CFLAGS) -Xs 617 618### Solaris 2.3 with X11 and specific cc 619#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 620 621### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 622#CC = /usr/ucb/cc 623#EXTRA_LIBS = -R/usr/ucblib 624 625### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 626# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 627#CC = cc 628#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 629#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 630#XPM_IPATH = -I$(XPM_DIR)/include 631#EXTRA_LIBS = $(XPM_LIB) 632#EXTRA_IPATHS = $(XPM_IPATH) 633#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 634 635### Solaris with workshop compilers: Vim is unstable when compiled with 636# "-fast". Use this instead. (Shea Martin) 637#CFLAGS = -x02 -xtarget=ultra 638 639### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 640#LDFLAGS = -lw -ldl -lXmu 641#GUI_LIB_LOC = -L/usr/local/lib 642 643### (8) Unisys 6035 (Glauber Ribeiro) 644#EXTRA_LIBS = -lnsl -lsocket -lgen 645 646### When builtin functions cause problems with gcc (for Sun 4.1.x) 647#CFLAGS = -O2 -Wall -traditional -Wno-implicit 648 649### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 650#EXTRA_DEFS = -DDOMAIN 651#CFLAGS= -O -A systype,bsd4.3 652 653### Coherent 4.2.10 on Intel 386 platform 654#EXTRA_DEFS = -Dvoid=int 655#EXTRA_LIBS = -lterm -lsocket 656 657### SCO 3.2, with different library name for terminfo 658#EXTRA_LIBS = -ltinfo 659 660### UTS2 for Amdahl UTS 2.1.x 661#EXTRA_DEFS = -DUTS2 662#EXTRA_LIBS = -lsocket 663 664### UTS4 for Amdahl UTS 4.x 665#EXTRA_DEFS = -DUTS4 -Xa 666 667### USL for Unix Systems Laboratories (SYSV 4.2) 668#EXTRA_DEFS = -DUSL 669 670### RISCos on MIPS without X11 671#EXTRA_DEFS = -DMIPS 672 673### RISCos on MIPS with X11 674#EXTRA_LIBS = -lsun 675 676### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 677#CC= gcc -D_POSIX_SOURCE 678#CFLAGS= -O2 679#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 680 681### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 682### Also use the CONF_TERM_LIB below! 683#EXTRA_LIBS = -lgen 684 685### (D) QNX (by G.F. Desrochers) 686#CFLAGS = -g -O -mf -4 687 688### (F) QNX (by John Oleynick) 689# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 690# CONF_OPT_X = --without-x. 691# 2. make config 692# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 693# have -ldir (does config find it somewhere?) and -ltermcap has at 694# least one problem so I use termlib.o instead. The problem with 695# termcap is that it segfaults if you call it with the name of 696# a non-existent terminal type. 697# 4. edit auto/config.h and add #define USE_TMPNAM 698# 5. add termlib.o to OBJ 699# 6. make 700 701### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 702#EXTRA_LIBS = -lgen 703 704### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 705#EXTRA_LIBS = -lgen -lnsl 706### For SINIX-Y this is needed for the right prototype of gettimeofday() 707#EXTRA_DEFS = -D_XPG_IV 708 709### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 710# Use both "-F O3" lines for optimization or the "-g" line for debugging 711#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 712#CFLAGS = -F O3 -DSINIXN 713#LDFLAGS = -F O3 714#CFLAGS = -g -DSINIXN 715 716### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 717#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 718#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 719 720### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 721#GUI_INC_LOC = -I/usr/include 722#GUI_LIB_LOC = -L/usr/lib 723#EXTRA_LIBS = -lgen 724 725### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 726#GUI_INC_LOC = -I/usr/necccs/include 727#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 728#XROOT = /usr/necccs 729#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 730#EXTRA_LIBS = -lsocket -lgen 731 732### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 733# Not needed for Irix 5.3, Ives Aerts reported 734#EXTRA_LIBS = -lmalloc -lc_s 735# Irix 4.0, when regexp and regcmp cannot be found when linking: 736#EXTRA_LIBS = -lmalloc -lc_s -lPW 737 738### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 739# Note: This newer option style is used with the MipsPro compilers ONLY if 740# you are compiling an "n32" or "64" ABI binary (use either a -n32 741# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 742# then the CFLAGS option format will be the typical style (i.e. 743# -Olimit 3000). 744#CFLAGS = -OPT:Olimit=3000 -O 745 746### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 747# compiler features! Beware, the optimization is EXTREMELY thorough 748# and takes quite a long time. 749# Note: See the note above. Here, the -mips3 option automatically 750# enables either the "n32" or "64" ABI, depending on what machine you 751# are compiling on (n32 is explicitly enabled here, just to make sure). 752#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 753#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 754 755### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 756### Suggested by Jon Wright <[email protected]>. 757### Tested on R8000 IRIX6.1 Power Indigo2. 758### Check /etc/compiler.defaults for your compiler settings. 759# either (for 64 bit pointers) uncomment the following line 760#GUI_LIB_LOC = -L/usr/lib64 761# then 762# 1) make config 763# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 764# 3) make 765# 766# or (for 32bit pointers) uncomment the following line 767#EXTRA_DEFS = -n32 768#GUI_LIB_LOC = -L/usr/lib32 769# then 770# 1) make config 771# 2) edit auto/config.mk, add -n32 to LDFLAGS 772# 3) make 773### 774 775### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 776### which is found by configure, doesn't work correctly. Symptom is the 777### error message "Termcap entry too long". Uncomment the next line. 778### On AIX 4.2.1 (and other versions probably), libtermcap is reported 779### not to display properly. 780### after changing this, you need to do "make reconfig". 781#CONF_TERM_LIB = --with-tlib=curses 782 783### (E) If you want to use termlib library instead of the automatically found 784### one. After changing this, you need to do "make reconfig". 785#CONF_TERM_LIB = --with-tlib=termlib 786 787### (a) ESIX V4.2 (Reinhard Wobst) 788#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 789 790### If you want to use ncurses library instead of the automatically found one 791### after changing this, you need to do "make reconfig". 792#CONF_TERM_LIB = --with-tlib=ncurses 793 794### For GCC on MSDOS, the ".exe" suffix will be added. 795#EXEEXT = .exe 796#LNKEXT = .exe 797 798### (O) For LynxOS 2.5.0, tested on PC. 799#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 800### For LynxOS 3.0.1, tested on PPC 801#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 802### For LynxOS 3.1.0, tested on PC 803#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 804 805 806### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 807### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 808#CFLAGS = -O -Qtarget=m88110compat 809#EXTRA_LIBS = -lgen 810 811##################### end of system specific lines ################### }}} 812 813### Names of the programs and targets {{{1 814VIMTARGET = $(VIMNAME)$(EXEEXT) 815EXTARGET = $(EXNAME)$(LNKEXT) 816VIEWTARGET = $(VIEWNAME)$(LNKEXT) 817GVIMNAME = g$(VIMNAME) 818GVIMTARGET = $(GVIMNAME)$(LNKEXT) 819GVIEWNAME = g$(VIEWNAME) 820GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 821RVIMNAME = r$(VIMNAME) 822RVIMTARGET = $(RVIMNAME)$(LNKEXT) 823RVIEWNAME = r$(VIEWNAME) 824RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 825RGVIMNAME = r$(GVIMNAME) 826RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 827RGVIEWNAME = r$(GVIEWNAME) 828RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 829VIMDIFFNAME = $(VIMNAME)diff 830GVIMDIFFNAME = g$(VIMDIFFNAME) 831VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 832GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 833EVIMNAME = e$(VIMNAME) 834EVIMTARGET = $(EVIMNAME)$(LNKEXT) 835EVIEWNAME = e$(VIEWNAME) 836EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 837 838### Names of the tools that are also made {{{1 839TOOLS = xxd/xxd$(EXEEXT) 840 841### Installation directories. The defaults come from configure. {{{1 842# 843### prefix the top directory for the data (default "/usr/local") 844# 845# Uncomment the next line to install Vim in your home directory. 846#prefix = $(HOME) 847 848### exec_prefix is the top directory for the executable (default $(prefix)) 849# 850# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 851#exec_prefix = /usr/machine 852 853### BINDIR dir for the executable (default "$(exec_prefix)/bin") 854### MANDIR dir for the manual pages (default "$(prefix)/man") 855### DATADIR dir for the other files (default "$(prefix)/lib" or 856# "$(prefix)/share") 857# They may be different when using different architectures for the 858# executable and a common directory for the other files. 859# 860# Uncomment the next line to install Vim in "/usr/bin" 861#BINDIR = /usr/bin 862# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 863#MANDIR = /usr/share/man 864# Uncomment the next line to install Vim help files in "/usr/share/vim" 865#DATADIR = /usr/share 866 867### DESTDIR root of the installation tree. This is prepended to the other 868# directories. This directory must exist. 869#DESTDIR = ~/pkg/vim 870 871### Directory of the man pages 872MAN1DIR = /man1 873 874### Vim version (adjusted by a script) 875VIMMAJOR = 7 876VIMMINOR = 0aa 877 878### Location of Vim files (should not need to be changed, and {{{1 879### some things might not work when they are changed!) 880VIMDIR = /vim 881VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 882HELPSUBDIR = /doc 883COLSUBDIR = /colors 884SYNSUBDIR = /syntax 885INDSUBDIR = /indent 886AUTOSUBDIR = /autoload 887PLUGSUBDIR = /plugin 888FTPLUGSUBDIR = /ftplugin 889LANGSUBDIR = /lang 890COMPSUBDIR = /compiler 891KMAPSUBDIR = /keymap 892MACROSUBDIR = /macros 893TOOLSSUBDIR = /tools 894TUTORSUBDIR = /tutor 895SPELLSUBDIR = /spell 896PRINTSUBDIR = /print 897PODIR = po 898 899### VIMLOC common root of the Vim files (all versions) 900### VIMRTLOC common root of the runtime Vim files (this version) 901### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 902### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 903### HELPSUBLOC location for help files 904### COLSUBLOC location for colorscheme files 905### SYNSUBLOC location for syntax files 906### INDSUBLOC location for indent files 907### AUTOSUBLOC location for standard autoload files 908### PLUGSUBLOC location for standard plugin files 909### FTPLUGSUBLOC location for ftplugin files 910### LANGSUBLOC location for language files 911### COMPSUBLOC location for compiler files 912### KMAPSUBLOC location for keymap files 913### MACROSUBLOC location for macro files 914### TOOLSSUBLOC location for tools files 915### TUTORSUBLOC location for tutor files 916### SPELLSUBLOC location for spell files 917### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 918### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 919### You can override these if you want to install them somewhere else. 920### Edit feature.h for compile-time settings. 921VIMLOC = $(DATADIR)$(VIMDIR) 922VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 923VIMRCLOC = $(VIMLOC) 924HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 925COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 926SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 927INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 928AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 929PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 930FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 931LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 932COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 933KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 934MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 935TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 936TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 937SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 938PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 939SCRIPTLOC = $(VIMRTLOC) 940 941### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 942### the runtime directory is not below it. 943#VIMRUNTIMEDIR = $(VIMRTLOC) 944 945### Name of the evim file target. 946EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 947MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 948 949### Name of the menu file target. 950SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 951SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 952SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 953 954### Name of the bugreport file target. 955SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 956 957### Name of the file type detection file target. 958SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 959 960### Name of the file type detection file target. 961SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 962 963### Name of the file type detection script file target. 964SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 965 966### Name of the ftplugin-on file target. 967SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 968 969### Name of the ftplugin-off file target. 970SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 971 972### Name of the indent-on file target. 973SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 974 975### Name of the indent-off file target. 976SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 977 978### Name of the option window script file target. 979SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 980 981# Program to install the program in the target directory. Could also be "mv". 982INSTALL_PROG = cp 983 984# Program to install the data in the target directory. Cannot be "mv"! 985INSTALL_DATA = cp 986INSTALL_DATA_R = cp -r 987 988### Program to run on installed binary 989#STRIP = strip 990 991### Permissions for binaries {{{1 992BINMOD = 755 993 994### Permissions for man page 995MANMOD = 644 996 997### Permissions for help files 998HELPMOD = 644 999 1000### Permissions for Perl and shell scripts 1001SCRIPTMOD = 755 1002 1003### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1004VIMSCRIPTMOD = 644 1005 1006### Permissions for all directories that are created 1007DIRMOD = 755 1008 1009### Permissions for all other files that are created 1010FILEMOD = 644 1011 1012# Where to copy the man and help files from 1013HELPSOURCE = ../runtime/doc 1014 1015# Where to copy the script files from (menu, bugreport) 1016SCRIPTSOURCE = ../runtime 1017 1018# Where to copy the colorscheme files from 1019COLSOURCE = ../runtime/colors 1020 1021# Where to copy the syntax files from 1022SYNSOURCE = ../runtime/syntax 1023 1024# Where to copy the indent files from 1025INDSOURCE = ../runtime/indent 1026 1027# Where to copy the standard plugin files from 1028AUTOSOURCE = ../runtime/autoload 1029 1030# Where to copy the standard plugin files from 1031PLUGSOURCE = ../runtime/plugin 1032 1033# Where to copy the ftplugin files from 1034FTPLUGSOURCE = ../runtime/ftplugin 1035 1036# Where to copy the macro files from 1037MACROSOURCE = ../runtime/macros 1038 1039# Where to copy the tools files from 1040TOOLSSOURCE = ../runtime/tools 1041 1042# Where to copy the tutor files from 1043TUTORSOURCE = ../runtime/tutor 1044 1045# Where to copy the spell files from 1046SPELLSOURCE = ../runtime/spell 1047 1048# Where to look for language specific files 1049LANGSOURCE = ../runtime/lang 1050 1051# Where to look for compiler files 1052COMPSOURCE = ../runtime/compiler 1053 1054# Where to look for keymap files 1055KMAPSOURCE = ../runtime/keymap 1056 1057# Where to look for print resource files 1058PRINTSOURCE = ../runtime/print 1059 1060# If you are using Linux, you might want to use this to make vim the 1061# default vi editor, it will create a link from vi to Vim when doing 1062# "make install". An existing file will be overwritten! 1063# When not using it, some make programs can't handle an undefined $(LINKIT). 1064#LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi 1065LINKIT = @echo >/dev/null 1066 1067### 1068### GRAPHICAL USER INTERFACE (GUI). {{{1 1069### 'configure --enable-gui' can enable one of these for you if you did set 1070### a corresponding CONF_OPT_GUI above and have X11. 1071### Override configures choice by uncommenting all the following lines. 1072### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1073### for enabling the Athena or Motif GUI. 1074#GUI_SRC = $(NONE_SRC) 1075#GUI_OBJ = $(NONE_OBJ) 1076#GUI_DEFS = $(NONE_DEFS) 1077#GUI_IPATH = $(NONE_IPATH) 1078#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1079#GUI_LIBS1 = $(NONE_LIBS1) 1080#GUI_LIBS2 = $(NONE_LIBS2) 1081#GUI_INSTALL = $(NONE_INSTALL) 1082#GUI_TARGETS = $(NONE_TARGETS) 1083#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1084#GUI_TESTTARGET = $(NONE_TESTTARGET) 1085#GUI_BUNDLE = $(NONE_BUNDLE) 1086 1087# Without a GUI install the normal way. 1088NONE_INSTALL = install_normal 1089 1090### KDE GUI interface. 1091KDE_SRC = gui.c pty.c gui_kde.cc gui_kde_x11.cc gui_kde_wid.cc gui_kde_wid_moc.cc kvim_iface_skel.cc 1092KDE_OBJ = objects/gui.o objects/pty.o objects/gui_kde.o objects/gui_kde_x11.o \ 1093 objects/gui_kde_wid.o objects/gui_kde_wid_moc.o \ 1094 objects/kvim_iface_skel.o 1095KDE_DEFS = -DFEAT_GUI_KDE $(NARROW_PROTO) 1096KDE_IPATH = $(GUI_INC_LOC) 1097KDE_LIBS_DIR = $(GUI_LIB_LOC) # Includes the libraries themselves 1098KDE_DIR = $(KDE_PREFIX) 1099KDE_LIBS1 = 1100KDE_LIBS2 = 1101KDE_INSTALL = install_normal 1102KDE_TARGETS = installglinks installkdeicons 1103KDE_MAN_TARGETS = yes 1104KDE_TESTTARGET = gui 1105KDE_BUNDLE = 1106 1107### GTK GUI 1108GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1109 gui_beval.c 1110GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1111 objects/pty.o objects/gui_gtk_f.o \ 1112 objects/gui_beval.o 1113GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1114GTK_IPATH = $(GUI_INC_LOC) 1115GTK_LIBS_DIR = $(GUI_LIB_LOC) 1116GTK_LIBS1 = 1117GTK_LIBS2 = $(GTK_LIBNAME) 1118GTK_INSTALL = install_normal 1119GTK_TARGETS = installglinks 1120GTK_MAN_TARGETS = yes 1121GTK_TESTTARGET = gui 1122GTK_BUNDLE = 1123 1124### Motif GUI 1125MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1126 gui_xmdlg.c gui_xmebw.c 1127MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1128 objects/pty.o objects/gui_beval.o \ 1129 objects/gui_xmdlg.o objects/gui_xmebw.o 1130MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1131MOTIF_IPATH = $(GUI_INC_LOC) 1132MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1133MOTIF_LIBS1 = 1134MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1135MOTIF_INSTALL = install_normal 1136MOTIF_TARGETS = installglinks 1137MOTIF_MAN_TARGETS = yes 1138MOTIF_TESTTARGET = gui 1139MOTIF_BUNDLE = 1140 1141### Athena GUI 1142### Use Xaw3d to make the menus look a little bit nicer 1143#XAW_LIB = -lXaw3d 1144XAW_LIB = -lXaw 1145 1146### When using Xaw3d, uncomment/comment the following lines to also get the 1147### scrollbars from Xaw3d. 1148#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1149#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1150# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1151#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1152# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1153# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1154ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1155 gui_at_sb.c gui_at_fs.c 1156ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1157 objects/pty.o objects/gui_beval.o \ 1158 objects/gui_at_sb.o objects/gui_at_fs.o 1159ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1160 1161ATHENA_IPATH = $(GUI_INC_LOC) 1162ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1163ATHENA_LIBS1 = $(XAW_LIB) 1164ATHENA_LIBS2 = -lXt 1165ATHENA_INSTALL = install_normal 1166ATHENA_TARGETS = installglinks 1167ATHENA_MAN_TARGETS = yes 1168ATHENA_TESTTARGET = gui 1169ATHENA_BUNDLE = 1170 1171### neXtaw GUI 1172NEXTAW_LIB = -lneXtaw 1173 1174NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1175NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1176 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1177NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1178 1179NEXTAW_IPATH = $(GUI_INC_LOC) 1180NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1181NEXTAW_LIBS1 = $(NEXTAW_LIB) 1182NEXTAW_LIBS2 = -lXt 1183NEXTAW_INSTALL = install_normal 1184NEXTAW_TARGETS = installglinks 1185NEXTAW_MAN_TARGETS = yes 1186NEXTAW_TESTTARGET = gui 1187NEXTAW_BUNDLE = 1188 1189### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1190# errors: ld: Undefined symbol 1191# _get_wmShellWidgetClass 1192# _get_applicationShellWidgetClass 1193# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1194# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1195#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1196# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1197# too: 1198#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1199 1200# PHOTON GUI 1201PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1202PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1203PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1204PHOTONGUI_IPATH = 1205PHOTONGUI_LIBS_DIR = 1206PHOTONGUI_LIBS1 = -lph -lphexlib 1207PHOTONGUI_LIBS2 = 1208PHOTONGUI_INSTALL = install_normal 1209PHOTONGUI_TARGETS = installglinks 1210PHOTONGUI_MAN_TARGETS = yes 1211PHOTONGUI_TESTTARGET = gui 1212PHOTONGUI_BUNDLE = 1213 1214# CARBON GUI 1215CARBONGUI_SRC = gui.c gui_mac.c 1216CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1217CARBONGUI_DEFS = -DFEAT_GUI_MAC -arch ppc -fno-common -fpascal-strings \ 1218 -Wall -Wno-unknown-pragmas \ 1219 -mdynamic-no-pic -pipe 1220CARBONGUI_IPATH = -I. -Iproto 1221CARBONGUI_LIBS_DIR = 1222CARBONGUI_LIBS1 = -framework Carbon 1223CARBONGUI_LIBS2 = 1224CARBONGUI_INSTALL = install_macosx 1225CARBONGUI_TARGETS = 1226CARBONGUI_MAN_TARGETS = 1227CARBONGUI_TESTTARGET = gui 1228CARBONGUI_BUNDLE = gui_bundle 1229APPDIR = $(VIMNAME).app 1230CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1231 1232# All GUI files 1233ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c gui_kde.cc gui_kde_wid.cc gui_kde_x11.cc gui_kde_wid_moc.cc 1234ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1235 1236# }}} 1237 1238### Command to create dependencies based on #include "..." 1239### prototype headers are ignored due to -DPROTO, system 1240### headers #include <...> are ignored if we use the -MM option, as 1241### e.g. provided by gcc-cpp. 1242### Include FEAT_GUI to get gependency on gui.h 1243### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1244CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1245 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1246 1247# flags for cproto 1248# This is for cproto 3 patchlevel 8 or below 1249# __inline, __attribute__ and __extension__ are not recognized by cproto 1250# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1251NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1252 -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1253 -D__extension__= -D__restrict="" \ 1254 -D__gnuc_va_list=char -D__builtin_va_list=char 1255 1256# 1257# This is for cproto 3 patchlevel 9 or above (currently 4.6) 1258# __inline and __attribute__ are now recognized by cproto 1259# -D"foo()=" is not supported by all compilers so do not use it 1260# NO_ATTR= 1261# 1262# maybe the "/usr/bin/cc -E" has to be adjusted for some systems 1263# This is for cproto 3.5 patchlevel 3: 1264# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1265# 1266# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1267# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1268# 1269# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1270PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1271 1272 1273################################################ 1274## no changes required below this line ## 1275################################################ 1276 1277SHELL = /bin/sh 1278 1279.SUFFIXES: 1280.SUFFIXES: .cc .c .o .pro 1281 1282PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1283POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1284 1285ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1286 1287LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca 1288 1289LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1290 1291DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1292 1293PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS) 1294 1295ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1296ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS) 1297 1298# abbreviations 1299DEST_BIN = $(DESTDIR)$(BINDIR) 1300DEST_VIM = $(DESTDIR)$(VIMLOC) 1301DEST_RT = $(DESTDIR)$(VIMRTLOC) 1302DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1303DEST_COL = $(DESTDIR)$(COLSUBLOC) 1304DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1305DEST_IND = $(DESTDIR)$(INDSUBLOC) 1306DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1307DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1308DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1309DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1310DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1311DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1312DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1313DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1314DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1315DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1316DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1317DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1318DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1319 1320# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1321# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1322# directory first. 1323# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1324DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1325DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1326DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1327DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1328DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1329DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1330DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1331DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1332DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1333 1334# BASIC_SRC: files that are always used 1335# GUI_SRC: extra GUI files for current configuration 1336# ALL_GUI_SRC: all GUI files for Unix 1337# 1338# SRC: files used for current configuration 1339# TAGS_SRC: source files used for make tags 1340# TAGS_INCL: include files used for make tags 1341# ALL_SRC: source files used for make depend and make lint 1342 1343TAGS_INCL = *.h 1344 1345BASIC_SRC = \ 1346 buffer.c \ 1347 charset.c \ 1348 diff.c \ 1349 digraph.c \ 1350 edit.c \ 1351 eval.c \ 1352 ex_cmds.c \ 1353 ex_cmds2.c \ 1354 ex_docmd.c \ 1355 ex_eval.c \ 1356 ex_getln.c \ 1357 fileio.c \ 1358 fold.c \ 1359 getchar.c \ 1360 hardcopy.c \ 1361 hashtable.c \ 1362 if_cscope.c \ 1363 if_xcmdsrv.c \ 1364 main.c \ 1365 mark.c \ 1366 memfile.c \ 1367 memline.c \ 1368 menu.c \ 1369 message.c \ 1370 misc1.c \ 1371 misc2.c \ 1372 move.c \ 1373 mbyte.c \ 1374 normal.c \ 1375 ops.c \ 1376 option.c \ 1377 os_unix.c \ 1378 auto/pathdef.c \ 1379 popupmenu.c \ 1380 quickfix.c \ 1381 regexp.c \ 1382 screen.c \ 1383 search.c \ 1384 spell.c \ 1385 syntax.c \ 1386 tag.c \ 1387 term.c \ 1388 ui.c \ 1389 undo.c \ 1390 version.c \ 1391 window.c \ 1392 $(OS_EXTRA_SRC) 1393 1394SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \ 1395 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \ 1396 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) 1397 1398TAGS_SRC = *.c *.cpp *.cc if_perl.xs 1399 1400EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1401 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \ 1402 workshop.c wsdebug.c integration.c netbeans.c 1403 1404# All sources, also the ones that are not configured 1405ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1406 1407# Which files to check with lint. Select one of these three lines. ALL_SRC 1408# checks more, but may not work well for checking a GUI that wasn't configured. 1409# The perl sources also don't work well with lint. 1410LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \ 1411 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1412#LINT_SRC = $(SRC) 1413#LINT_SRC = $(ALL_SRC) 1414 1415OBJ = \ 1416 objects/buffer.o \ 1417 objects/charset.o \ 1418 objects/diff.o \ 1419 objects/digraph.o \ 1420 objects/edit.o \ 1421 objects/eval.o \ 1422 objects/ex_cmds.o \ 1423 objects/ex_cmds2.o \ 1424 objects/ex_docmd.o \ 1425 objects/ex_eval.o \ 1426 objects/ex_getln.o \ 1427 objects/fileio.o \ 1428 objects/fold.o \ 1429 objects/getchar.o \ 1430 objects/hardcopy.o \ 1431 objects/hashtable.o \ 1432 $(HANGULIN_OBJ) \ 1433 objects/if_cscope.o \ 1434 objects/if_xcmdsrv.o \ 1435 objects/main.o \ 1436 objects/mark.o \ 1437 objects/memfile.o \ 1438 objects/memline.o \ 1439 objects/menu.o \ 1440 objects/message.o \ 1441 objects/misc1.o \ 1442 objects/misc2.o \ 1443 objects/move.o \ 1444 objects/mbyte.o \ 1445 objects/normal.o \ 1446 objects/ops.o \ 1447 objects/option.o \ 1448 objects/os_unix.o \ 1449 objects/pathdef.o \ 1450 objects/popupmenu.o \ 1451 objects/quickfix.o \ 1452 objects/regexp.o \ 1453 objects/screen.o \ 1454 objects/search.o \ 1455 objects/spell.o \ 1456 objects/syntax.o \ 1457 $(SNIFF_OBJ) \ 1458 objects/tag.o \ 1459 objects/term.o \ 1460 objects/ui.o \ 1461 objects/undo.o \ 1462 objects/window.o \ 1463 $(GUI_OBJ) \ 1464 $(MZSCHEME_OBJ) \ 1465 $(PERL_OBJ) \ 1466 $(PYTHON_OBJ) \ 1467 $(TCL_OBJ) \ 1468 $(RUBY_OBJ) \ 1469 $(OS_EXTRA_OBJ) \ 1470 $(WORKSHOP_OBJ) \ 1471 $(NETBEANS_OBJ) \ 1472 $(WSDEBUG_OBJ) 1473 1474PRO_AUTO = \ 1475 buffer.pro \ 1476 charset.pro \ 1477 diff.pro \ 1478 digraph.pro \ 1479 edit.pro \ 1480 eval.pro \ 1481 ex_cmds.pro \ 1482 ex_cmds2.pro \ 1483 ex_docmd.pro \ 1484 ex_eval.pro \ 1485 ex_getln.pro \ 1486 fileio.pro \ 1487 fold.pro \ 1488 getchar.pro \ 1489 hardcopy.pro \ 1490 hashtable.pro \ 1491 hangulin.pro \ 1492 if_cscope.pro \ 1493 if_xcmdsrv.pro \ 1494 if_python.pro \ 1495 if_ruby.pro \ 1496 main.pro \ 1497 mark.pro \ 1498 memfile.pro \ 1499 memline.pro \ 1500 menu.pro \ 1501 message.pro \ 1502 misc1.pro \ 1503 misc2.pro \ 1504 move.pro \ 1505 mbyte.pro \ 1506 normal.pro \ 1507 ops.pro \ 1508 option.pro \ 1509 os_unix.pro \ 1510 popupmenu.pro \ 1511 quickfix.pro \ 1512 regexp.pro \ 1513 screen.pro \ 1514 search.pro \ 1515 spell.pro \ 1516 syntax.pro \ 1517 tag.pro \ 1518 term.pro \ 1519 termlib.pro \ 1520 ui.pro \ 1521 undo.pro \ 1522 version.pro \ 1523 window.pro \ 1524 gui_beval.pro \ 1525 workshop.pro \ 1526 netbeans.pro \ 1527 $(ALL_GUI_PRO) \ 1528 $(TCL_PRO) 1529 1530PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1531 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1532 1533# Default target is making the executable and tools 1534all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1535 1536tools: $(TOOLS) 1537 1538# Run configure with all the setting from above. 1539# 1540# Note: auto/config.h doesn't depend on configure, because running configure 1541# doesn't always update auto/config.h. The timestamp isn't changed if the 1542# file contents didn't change (to avoid recompiling everything). Including a 1543# dependency on auto/config.h would cause running configure each time when 1544# auto/config.h isn't updated. The dependency on auto/config.mk should make 1545# sure configure is run when it's needed. 1546# 1547config auto/config.mk: auto/configure config.mk.in config.h.in 1548 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1549 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1550 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1551 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1552 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \ 1553 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1554 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1555 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1556 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1557 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1558 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) 1559 1560# Use "make reconfig" to rerun configure without cached values. 1561# When config.h changes, most things will be recompiled automatically. 1562# Invoke $(MAKE) to run config with the empty auto/config.mk. 1563# Invoke $(MAKE) to build all with the filled auto/config.mk. 1564reconfig: scratch clean 1565 $(MAKE) -f Makefile config 1566 $(MAKE) -f Makefile all 1567 1568# Run autoconf to produce auto/configure. 1569# Note: 1570# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1571# producing auto/configure. 1572# - autoconf is not run automatically, because a patch usually changes both 1573# configure.in and auto/configure but can't update the timestamps. People 1574# who do not have (the correct version of) autoconf would run into trouble. 1575# 1576# Two tricks are required to make autoconf put its output in the "auto" dir: 1577# - Temporarily move the ./configure script to ./configure.save. Don't 1578# overwrite it, it's probably the result of an aborted autoconf. 1579# - Use sed to change ./config.log to auto/config.log in the configure script. 1580# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1581# care of: 1582# - configure.lineno: has the line numbers replaced with $LINENO. That 1583# improves patches a LOT, thus use it instead (until someone says it doesn't 1584# work on some system). 1585# - autom4te.cache directory is created and not cleaned up. Delete it. 1586# - Uses ">config.log" instead of "./config.log". 1587autoconf: 1588 if test ! -f configure.save; then mv configure configure.save; fi 1589 autoconf 1590 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1591 chmod 755 auto/configure 1592 mv -f configure.save configure 1593 -rm -rf autom4te.cache 1594 -rm -f auto/config.status auto/config.cache 1595 1596# Re-execute this Makefile to include the new auto/config.mk produced by 1597# configure Only used when typing "make" with a fresh auto/config.mk. 1598myself: 1599 $(MAKE) -f Makefile all 1600 1601 1602# The normal command to compile a .c file to its .o file. 1603CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1604 1605 1606# Link the target for normal use or debugging. 1607# A shell script is used to try linking without unneccesary libraries. 1608$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1609 $(CCC) version.c -o objects/version.o 1610 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1611 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1612 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1613 1614xxd/xxd$(EXEEXT): xxd/xxd.c 1615 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1616 $(MAKE) -f Makefile 1617 1618# Build the language specific files if they were unpacked. 1619# Generate the converted .mo files separately, it's no problem if this fails. 1620languages: 1621 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1622 $(MAKE) language-check; \ 1623 cd $(PODIR); \ 1624 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1625 fi 1626 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1627 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1628 fi 1629 1630# Separate target to check the po files for valitidy, because it depends on 1631# ./vim. 1632language-check: $(VIMTARGET) 1633 cd $(PODIR); $(MAKE) check VIM=../$(VIMTARGET) 1634 1635# Update the *.po files for changes in the sources. Only run manually. 1636update-po: 1637 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1638 1639# Generate function prototypes. This is not needed to compile vim, but if 1640# you want to use it, cproto is out there on the net somewhere -- Webb 1641# 1642# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1643# few include files that can not be found, that's OK. 1644 1645proto: $(PRO_AUTO) $(PRO_MANUAL) 1646 1647### Would be nice if this would work for "normal" make. 1648### Currently it only works for (Free)BSD make. 1649#$(PRO_AUTO): $$(*F).c 1650# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@ 1651 1652# Always define FEAT_GUI. This may generate a few warnings if it's also 1653# defined in auto/config.h, you can ignore that. 1654.c.pro: 1655 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@ 1656 echo "/* vim: set ft=c : */" >> proto/$@ 1657 1658os_amiga.pro: os_amiga.c 1659 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1660 echo "/* vim: set ft=c : */" >> proto/$@ 1661 1662os_msdos.pro: os_msdos.c 1663 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1664 echo "/* vim: set ft=c : */" >> proto/$@ 1665 1666os_win16.pro: os_win16.c 1667 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1668 echo "/* vim: set ft=c : */" >> proto/$@ 1669 1670os_win32.pro: os_win32.c 1671 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1672 echo "/* vim: set ft=c : */" >> proto/$@ 1673 1674os_mswin.pro: os_mswin.c 1675 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1676 echo "/* vim: set ft=c : */" >> proto/$@ 1677 1678os_beos.pro: os_beos.c 1679 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1680 echo "/* vim: set ft=c : */" >> proto/$@ 1681 1682os_vms.pro: os_vms.c 1683# must use os_vms_conf.h for auto/config.h 1684 mv auto/config.h auto/config.h.save 1685 cp os_vms_conf.h auto/config.h 1686 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1687 echo "/* vim: set ft=c : */" >> proto/$@ 1688 rm auto/config.h 1689 mv auto/config.h.save auto/config.h 1690 1691# if_perl.pro is special: Use the generated if_perl.c for input and remove 1692# prototypes for local functions. 1693if_perl.pro: auto/if_perl.c 1694 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1695 1696 1697notags: 1698 -rm -f tags 1699 1700# Note: tags is made for the currently configured version, can't include both 1701# Motif and Athena GUI 1702# You can ignore error messages for missing files. 1703tags TAGS: notags 1704 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1705 1706# Make a highlight file for types. Requires Exuberant ctags and awk 1707types: types.vim 1708types.vim: $(TAGS_SRC) $(TAGS_INCL) 1709 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1710 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1711 {printf("%s ", $$1)}END{print ""}' > $@ 1712 1713# Execute the test scripts. Run these after compiling Vim, before installing. 1714# This doesn't depend on $(VIMTARGET), because that won't work when configure 1715# wasn't run yet. Restart make to build it instead. 1716# 1717# This will produce a lot of garbage on your screen, including a few error 1718# messages. Don't worry about that. 1719# If there is a real error, there will be a difference between "test.out" and 1720# a "test99.ok" file. 1721# If everything is allright, the final message will be "ALL DONE". 1722# 1723test check: 1724 $(MAKE) -f Makefile $(VIMTARGET) 1725 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1726 1727testclean: 1728 cd testdir; $(MAKE) -f Makefile clean 1729 1730# 1731# Avoid overwriting an existing executable, somebody might be running it and 1732# overwriting it could cause it to crash. Deleting it is OK, it won't be 1733# really deleted until all running processes for it have exited. It is 1734# renamed first, in case the deleting doesn't work. 1735# 1736# If you want to keep an older version, rename it before running "make 1737# install". 1738# 1739install: $(GUI_INSTALL) 1740 1741install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1742 1743installvim: installvimbin installtutorbin \ 1744 installruntime installlinks installmanlinks 1745 1746installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1747 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1748 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1749 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1750 fi 1751 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1752 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1753 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1754# may create a link to the new executable from /usr/bin/vi 1755 -$(LINKIT) 1756 1757# Long list of arguments for the shell script that installs the manual pages 1758# for one language. 1759INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1760 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1761 1762# Install most of the runtime files 1763installruntime: installrtbase installmacros installtutor installspell 1764 1765# install the help files; first adjust the contents for the final location 1766installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1767 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1768 $(DEST_FTP) $(DEST_AUTO) $(DEST_PLUG) $(DEST_TUTOR) \ 1769 $(DEST_SPELL) $(DEST_COMP) 1770 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1771 @echo generating help tags 1772# Generate the help tags with ":helptags" to handle all languages. 1773 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1774 cd $(HELPSOURCE); \ 1775 files=`ls *.txt tags`; \ 1776 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1777 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1778 cd $(DEST_HELP); \ 1779 chmod $(HELPMOD) $$files 1780 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1781 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1782# install the menu files 1783 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1784 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1785 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1786 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1787 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1788 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1789# install the evim file 1790 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1791 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1792 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1793 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1794# install the bugreport file 1795 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1796 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1797# install the example vimrc files 1798 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1799 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1800 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1801 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1802# install the file type detection files 1803 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1804 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1805 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1806 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1807 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1808 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1809 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1810 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1811 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1812 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1813 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1814 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1815 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1816 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1817 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1818 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1819# install the print resource files 1820 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1821 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1822# install the colorscheme files 1823 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1824 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1825# install the syntax files 1826 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1827 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1828# install the indent files 1829 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1830 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1831# install the standard autoload files 1832 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 1833 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 1834# install the standard plugin files 1835 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1836 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1837# install the ftplugin files 1838 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP) 1839 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1840# install the compiler files 1841 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1842 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1843 1844installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1845 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1846 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1847 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1848 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1849# When using CVS some CVS directories might have been copied. 1850 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \ 1851 if test -n "$$cvs"; then \ 1852 rm -rf $$cvs; \ 1853 fi 1854 1855# install the tutor files 1856installtutorbin: $(DEST_VIM) 1857 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1858 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1859 1860installtutor: $(DEST_RT) $(DEST_TUTOR) 1861 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1862 chmod $(HELPMOD) $(DEST_TUTOR)/* 1863 1864# Install the spell files, if they exist. This assumes at least the English 1865# spell file is there. 1866installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 1867 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 1868 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 1869 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.vim; \ 1870 fi 1871 1872# install helper program xxd 1873installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1874 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 1875 $(INSTALL_TOOL_LANGS) 1876 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1877 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1878 rm -f $(DEST_BIN)/xxd.rm; \ 1879 fi 1880 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1881 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1882 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1883 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 1884 1885# install the runtime tools 1886 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1887# When using CVS some CVS directories might have been copied. 1888 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1889 if test -n "$$cvs"; then \ 1890 rm -rf $$cvs; \ 1891 fi 1892 -chmod $(FILEMOD) $(DEST_TOOLS)/* 1893# replace the path in some tools 1894 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 1895 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1896 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1897 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 1898 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 1899 1900# install the language specific files for tools, if they were unpacked 1901install-tool-languages: 1902 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1903 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 1904 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 1905 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 1906 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 1907 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 1908 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 1909 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 1910 1911# install the language specific files, if they were unpacked 1912install-languages: languages $(DEST_LANG) $(DEST_KMAP) 1913 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1914 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 1915 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 1916 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 1917 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 1918 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 1919 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 1920 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 1921 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1922 $(DEST_MAN_FR) $(INSTALLMLARGS) 1923 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1924 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 1925 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1926 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 1927 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1928 $(DEST_MAN_IT) $(INSTALLMLARGS) 1929 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1930 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 1931 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1932 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 1933 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1934 $(DEST_MAN_RU) $(INSTALLMLARGS) 1935 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1936 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 1937 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1938 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 1939 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 1940 fi 1941 if test -d $(LANGSOURCE); then \ 1942 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 1943 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 1944 fi 1945 if test -d $(KMAPSOURCE); then \ 1946 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 1947 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 1948 fi 1949 1950# Install the icons for the KDE GUI. This differs from the KDE icons for 1951# other GUIs. 1952installkdeicons: 1953 mkdir -p $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ 1954 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/ 1955 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/ 1956 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/ 1957 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/ 1958 mkdir -p $(DESTDIR)$(KDE_DIR)/share/apps/kvim 1959 1960 cp ../runtime/KVim.desktop $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ && chmod 644 $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/KVim.desktop 1961 cp ../runtime/kvim32x32.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png 1962 cp ../runtime/kvim48x48.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png 1963 cp ../runtime/hi16-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/hi16-action-make.png 1964 cp ../runtime/hi22-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/hi22-action-make.png 1965 cp ../runtime/kde-tips $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips && chmod 644 $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips 1966 1967# install the icons for KDE, if the directory exists and the icon doesn't. 1968ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 1969ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 1970ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 1971KDEPATH = $(HOME)/.kde/share/icons 1972install-icons: 1973 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 1974 -a ! -f $(ICON48PATH)/gvim.png; then \ 1975 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 1976 fi 1977 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 1978 -a ! -f $(ICON32PATH)/gvim.png; then \ 1979 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 1980 fi 1981 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 1982 -a ! -f $(ICON16PATH)/gvim.png; then \ 1983 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 1984 fi 1985 1986 1987$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 1988 @echo Runtime files not found. 1989 @echo You need to unpack the runtime archive before running "make install". 1990 test -f error 1991 1992$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1993 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 1994 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 1995 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 1996 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 1997 $(DEST_AUTO) $(DEST_PLUG): 1998 -$(SHELL) ./mkinstalldirs $@ 1999 -chmod $(DIRMOD) $@ 2000 2001# create links from various names to vim. This is only done when the links 2002# (or executables with the same name) don't exist yet. 2003installlinks: $(GUI_TARGETS) \ 2004 $(DEST_BIN)/$(EXTARGET) \ 2005 $(DEST_BIN)/$(VIEWTARGET) \ 2006 $(DEST_BIN)/$(RVIMTARGET) \ 2007 $(DEST_BIN)/$(RVIEWTARGET) \ 2008 $(INSTALLVIMDIFF) 2009 2010installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2011 $(DEST_BIN)/$(GVIEWTARGET) \ 2012 $(DEST_BIN)/$(RGVIMTARGET) \ 2013 $(DEST_BIN)/$(RGVIEWTARGET) \ 2014 $(DEST_BIN)/$(EVIMTARGET) \ 2015 $(DEST_BIN)/$(EVIEWTARGET) \ 2016 $(INSTALLGVIMDIFF) 2017 2018installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2019installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2020 2021$(DEST_BIN)/$(EXTARGET): 2022 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2023 2024$(DEST_BIN)/$(VIEWTARGET): 2025 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2026 2027$(DEST_BIN)/$(GVIMTARGET): 2028 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2029 2030$(DEST_BIN)/$(GVIEWTARGET): 2031 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2032 2033$(DEST_BIN)/$(RVIMTARGET): 2034 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2035 2036$(DEST_BIN)/$(RVIEWTARGET): 2037 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2038 2039$(DEST_BIN)/$(RGVIMTARGET): 2040 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2041 2042$(DEST_BIN)/$(RGVIEWTARGET): 2043 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2044 2045$(DEST_BIN)/$(VIMDIFFTARGET): 2046 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2047 2048$(DEST_BIN)/$(GVIMDIFFTARGET): 2049 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2050 2051$(DEST_BIN)/$(EVIMTARGET): 2052 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2053 2054$(DEST_BIN)/$(EVIEWTARGET): 2055 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2056 2057# create links for the manual pages with various names to vim. This is only 2058# done when the links (or manpages with the same name) don't exist yet. 2059 2060INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2061 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2062 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2063 $(GVIMDIFFNAME) $(EVIEWNAME) 2064 2065installmanlinks: 2066 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2067 $(DEST_MAN) $(INSTALLMLARGS) 2068 2069uninstall: uninstall_runtime 2070 -rm -f $(DEST_BIN)/$(VIMTARGET) 2071 -rm -f $(DEST_BIN)/vimtutor 2072 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2073 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2074 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2075 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2076 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2077 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2078 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2079 2080# Note: the "rmdir" will fail if any files were added after "make install" 2081uninstall_runtime: 2082 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2083 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2084 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2085 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2086 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2087 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2088 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2089 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2090 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2091 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2092 $(DEST_MAN) $(INSTALLMLARGS) 2093 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2094 $(DEST_MAN_FR) $(INSTALLMLARGS) 2095 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2096 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2097 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2098 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2099 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2100 $(DEST_MAN_IT) $(INSTALLMLARGS) 2101 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2102 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2103 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2104 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2105 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2106 $(DEST_MAN_RU) $(INSTALLMLARGS) 2107 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2108 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2109 -rm -f $(DEST_MAN)/xxd.1 2110 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2111 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2112 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2113 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2114 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2115 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2116 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2117 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2118 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2119 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2120 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2121 -rm -f $(SYS_OPTWIN_FILE) 2122 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2123 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2124 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2125 -rm -rf $(DEST_MACRO) 2126 -rm -rf $(DEST_TUTOR) 2127 -rm -rf $(DEST_SPELL) 2128 -rm -rf $(DEST_TOOLS) 2129 -rm -rf $(DEST_LANG) 2130 -rm -rf $(DEST_KMAP) 2131 -rm -rf $(DEST_COMP) 2132 -rm -f $(DEST_PRINT)/*.ps 2133 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2134 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2135 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2136 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2137 -rmdir $(DEST_FTP) $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2138# This will fail when other Vim versions are installed, no worries. 2139 -rmdir $(DEST_VIM) 2140 2141# Clean up all the files that have been produced, except configure's. 2142# We support common typing mistakes for Juergen! :-) 2143clean celan: testclean 2144 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) xxd/*.o 2145 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2146 -rm -f conftest* *~ auto/link.sed 2147 -rm -rf $(APPDIR) 2148 -rm -f gui_kde_wid_moc.cc kvim_iface_skel.cc *.kidl 2149 if test -d $(PODIR); then \ 2150 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2151 fi 2152 2153# Make a shadow directory for compilation on another system or with different 2154# features. 2155SHADOWDIR = shadow 2156 2157shadow: runtime pixmaps 2158 mkdir $(SHADOWDIR) 2159 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../mkinstalldirs . 2160 mkdir $(SHADOWDIR)/auto 2161 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2162 cd $(SHADOWDIR); rm -f auto/link.sed 2163 cp Makefile configure $(SHADOWDIR) 2164 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2165 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2166 cp config.mk.dist $(SHADOWDIR) 2167 mkdir $(SHADOWDIR)/xxd 2168 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2169 mkdir $(SHADOWDIR)/testdir 2170 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2171 ../../testdir/vimrc.unix \ 2172 ../../testdir/*.in \ 2173 ../../testdir/unix.vim \ 2174 ../../testdir/*.ok . 2175 2176# Link needed for doing "make install" in a shadow directory. 2177runtime: 2178 -ln -s ../runtime . 2179 2180# Link needed for doing "make" using GTK in a shadow directory. 2181pixmaps: 2182 -ln -s ../pixmaps . 2183 2184# Update the synmenu.vim file with the latest Syntax menu. 2185# This is only needed when runtime/makemenu.vim was changed. 2186menu: ./vim ../runtime/makemenu.vim 2187 ./vim -u ../runtime/makemenu.vim 2188 2189# Start configure from scratch 2190scrub scratch: 2191 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2192 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2193 touch auto/config.h 2194 cp config.mk.dist auto/config.mk 2195 2196distclean: clean scratch 2197 -rm -f tags 2198 2199dist: distclean 2200 @echo 2201 @echo Making the distribution has to be done in the top directory 2202 2203mdepend: 2204 -@rm -f Makefile~ 2205 cp Makefile Makefile~ 2206 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2207 @for i in $(ALL_SRC) ; do \ 2208 echo "$$i" ; \ 2209 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2210 $(CPP) $$i |\ 2211 grep '^# .*"\./.*\.h"' |\ 2212 sort -t'"' -u +1 -2 |\ 2213 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2214 ` >> tmp_make ; \ 2215 done 2216 mv tmp_make Makefile 2217 2218depend: 2219 -@rm -f Makefile~ 2220 cp Makefile Makefile~ 2221 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2222 -for i in $(ALL_SRC); do echo $$i; \ 2223 $(CPP_DEPEND) $$i | \ 2224 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2225 mv tmp_make Makefile 2226 2227# Run lint. Clean up the *.ln files that are sometimes left behind. 2228lint: 2229 lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2230 -rm -f *.ln 2231 2232# Check dosinst.c with lint. 2233lintinstall: 2234 lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2235 -rm -f dosinst.ln 2236 2237########################################################################### 2238 2239.c.o: 2240 $(CCC) $< 2241 2242.cc.o: 2243 $(CCC) $< 2244 2245auto/if_perl.c: if_perl.xs 2246 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2247 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2248 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2249 2250auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2251 CC="$(CC) $(ALL_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2252 2253QUOTESED = sed -e 's/"/\\"/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2254auto/pathdef.c: Makefile auto/config.mk 2255 -@echo creating $@ 2256 -@echo '/* pathdef.c */' > $@ 2257 -@echo '/* This file is automatically created by Makefile' >> $@ 2258 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2259 -@echo '#include "vim.h"' >> $@ 2260 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2261 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2262 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2263 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2264 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2265 -@if test -n "$(COMPILEDBY)"; then \ 2266 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2267 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2268 -@echo '";' >> $@ 2269 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2270 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2271 -@echo '";' >> $@ 2272 -@sh $(srcdir)/pathdef.sh 2273 2274# All the object files are put in the "objects" directory. Since not all make 2275# commands understand putting object files in another directory, it must be 2276# specified for each file separately. 2277 2278objects: 2279 mkdir objects 2280 2281objects/buffer.o: buffer.c 2282 $(CCC) -o $@ buffer.c 2283 2284objects/charset.o: charset.c 2285 $(CCC) -o $@ charset.c 2286 2287objects/diff.o: diff.c 2288 $(CCC) -o $@ diff.c 2289 2290objects/digraph.o: digraph.c 2291 $(CCC) -o $@ digraph.c 2292 2293objects/edit.o: edit.c 2294 $(CCC) -o $@ edit.c 2295 2296objects/eval.o: eval.c 2297 $(CCC) -o $@ eval.c 2298 2299objects/ex_cmds.o: ex_cmds.c 2300 $(CCC) -o $@ ex_cmds.c 2301 2302objects/ex_cmds2.o: ex_cmds2.c 2303 $(CCC) -o $@ ex_cmds2.c 2304 2305objects/ex_docmd.o: ex_docmd.c 2306 $(CCC) -o $@ ex_docmd.c 2307 2308objects/ex_eval.o: ex_eval.c 2309 $(CCC) -o $@ ex_eval.c 2310 2311objects/ex_getln.o: ex_getln.c 2312 $(CCC) -o $@ ex_getln.c 2313 2314objects/fileio.o: fileio.c 2315 $(CCC) -o $@ fileio.c 2316 2317objects/fold.o: fold.c 2318 $(CCC) -o $@ fold.c 2319 2320objects/getchar.o: getchar.c 2321 $(CCC) -o $@ getchar.c 2322 2323objects/hardcopy.o: hardcopy.c 2324 $(CCC) -o $@ hardcopy.c 2325 2326objects/hashtable.o: hashtable.c 2327 $(CCC) -o $@ hashtable.c 2328 2329objects/gui.o: gui.c 2330 $(CCC) -o $@ gui.c 2331 2332objects/gui_at_fs.o: gui_at_fs.c 2333 $(CCC) -o $@ gui_at_fs.c 2334 2335objects/gui_at_sb.o: gui_at_sb.c 2336 $(CCC) -o $@ gui_at_sb.c 2337 2338objects/gui_athena.o: gui_athena.c 2339 $(CCC) -o $@ gui_athena.c 2340 2341objects/gui_beval.o: gui_beval.c 2342 $(CCC) -o $@ gui_beval.c 2343 2344objects/gui_gtk.o: gui_gtk.c 2345 $(CCC) -o $@ gui_gtk.c 2346 2347objects/gui_gtk_f.o: gui_gtk_f.c 2348 $(CCC) -o $@ gui_gtk_f.c 2349 2350objects/gui_gtk_x11.o: gui_gtk_x11.c 2351 $(CCC) -o $@ gui_gtk_x11.c 2352 2353objects/gui_motif.o: gui_motif.c 2354 $(CCC) -o $@ gui_motif.c 2355 2356objects/gui_xmdlg.o: gui_xmdlg.c 2357 $(CCC) -o $@ gui_xmdlg.c 2358 2359objects/gui_xmebw.o: gui_xmebw.c 2360 $(CCC) -o $@ gui_xmebw.c 2361 2362objects/gui_x11.o: gui_x11.c 2363 $(CCC) -o $@ gui_x11.c 2364 2365objects/gui_photon.o: gui_photon.c 2366 $(CCC) -o $@ gui_photon.c 2367 2368objects/gui_mac.o: gui_mac.c 2369 $(CCC) -o $@ gui_mac.c 2370 2371objects/hangulin.o: hangulin.c 2372 $(CCC) -o $@ hangulin.c 2373 2374objects/if_cscope.o: if_cscope.c 2375 $(CCC) -o $@ if_cscope.c 2376 2377objects/if_xcmdsrv.o: if_xcmdsrv.c 2378 $(CCC) -o $@ if_xcmdsrv.c 2379 2380objects/if_mzsch.o: if_mzsch.c 2381 $(CCC) -o $@ if_mzsch.c 2382 2383objects/if_perl.o: auto/if_perl.c 2384 $(CCC) -o $@ auto/if_perl.c 2385 2386objects/if_perlsfio.o: if_perlsfio.c 2387 $(CCC) -o $@ if_perlsfio.c 2388 2389objects/if_python.o: if_python.c 2390 $(CCC) -o $@ if_python.c 2391 2392objects/if_ruby.o: if_ruby.c 2393 $(CCC) -o $@ if_ruby.c 2394 2395objects/if_sniff.o: if_sniff.c 2396 $(CCC) -o $@ if_sniff.c 2397 2398objects/if_tcl.o: if_tcl.c 2399 $(CCC) -o $@ if_tcl.c 2400 2401objects/integration.o: integration.c 2402 $(CCC) -o $@ integration.c 2403 2404objects/main.o: main.c 2405 $(CCC) -o $@ main.c 2406 2407objects/mark.o: mark.c 2408 $(CCC) -o $@ mark.c 2409 2410objects/memfile.o: memfile.c 2411 $(CCC) -o $@ memfile.c 2412 2413objects/memline.o: memline.c 2414 $(CCC) -o $@ memline.c 2415 2416objects/menu.o: menu.c 2417 $(CCC) -o $@ menu.c 2418 2419objects/message.o: message.c 2420 $(CCC) -o $@ message.c 2421 2422objects/misc1.o: misc1.c 2423 $(CCC) -o $@ misc1.c 2424 2425objects/misc2.o: misc2.c 2426 $(CCC) -o $@ misc2.c 2427 2428objects/move.o: move.c 2429 $(CCC) -o $@ move.c 2430 2431objects/mbyte.o: mbyte.c 2432 $(CCC) -o $@ mbyte.c 2433 2434objects/normal.o: normal.c 2435 $(CCC) -o $@ normal.c 2436 2437objects/ops.o: ops.c 2438 $(CCC) -o $@ ops.c 2439 2440objects/option.o: option.c 2441 $(CCC) -o $@ option.c 2442 2443objects/os_beos.o: os_beos.c 2444 $(CCC) -o $@ os_beos.c 2445 2446objects/os_qnx.o: os_qnx.c 2447 $(CCC) -o $@ os_qnx.c 2448 2449objects/os_macosx.o: os_macosx.c 2450 $(CCC) -o $@ os_macosx.c 2451 2452objects/os_mac_conv.o: os_mac_conv.c 2453 $(CCC) -o $@ os_mac_conv.c 2454 2455objects/os_unix.o: os_unix.c 2456 $(CCC) -o $@ os_unix.c 2457 2458objects/pathdef.o: auto/pathdef.c 2459 $(CCC) -o $@ auto/pathdef.c 2460 2461objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2462 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \ 2463 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2464 2465objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2466 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2467 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2468 $(PYTHON_GETPATH_CFLAGS) 2469 2470objects/pty.o: pty.c 2471 $(CCC) -o $@ pty.c 2472 2473objects/popupmenu.o: popupmenu.c 2474 $(CCC) -o $@ popupmenu.c 2475 2476objects/quickfix.o: quickfix.c 2477 $(CCC) -o $@ quickfix.c 2478 2479objects/regexp.o: regexp.c 2480 $(CCC) -o $@ regexp.c 2481 2482objects/screen.o: screen.c 2483 $(CCC) -o $@ screen.c 2484 2485objects/search.o: search.c 2486 $(CCC) -o $@ search.c 2487 2488objects/spell.o: spell.c 2489 $(CCC) -o $@ spell.c 2490 2491objects/syntax.o: syntax.c 2492 $(CCC) -o $@ syntax.c 2493 2494objects/tag.o: tag.c 2495 $(CCC) -o $@ tag.c 2496 2497objects/term.o: term.c 2498 $(CCC) -o $@ term.c 2499 2500objects/ui.o: ui.c 2501 $(CCC) -o $@ ui.c 2502 2503objects/undo.o: undo.c 2504 $(CCC) -o $@ undo.c 2505 2506objects/window.o: window.c 2507 $(CCC) -o $@ window.c 2508 2509objects/workshop.o: workshop.c 2510 $(CCC) -o $@ workshop.c 2511 2512objects/wsdebug.o: wsdebug.c 2513 $(CCC) -o $@ wsdebug.c 2514 2515objects/gui_kde.o: gui_kde.cc 2516 $(CCC) -o $@ gui_kde.cc 2517 2518objects/gui_kde_x11.o: gui_kde_x11.cc 2519 $(CCC) -o $@ gui_kde_x11.cc 2520 2521objects/gui_kde_wid.o: gui_kde_wid.cc 2522 $(MOC) -o gui_kde_wid_moc.cc gui_kde_wid.h 2523 $(KDE_DIR)/bin/dcopidl kvim_iface.h > kvim_iface.kidl || ( rm -f kvim_iface.kidl ; /bin/false ) 2524 $(KDE_DIR)/bin/dcopidl2cpp --c++-suffix cc --no-stub kvim_iface.kidl 2525 $(CCC) -o $@ gui_kde_wid.cc 2526 2527gui_kde_wid_moc.cc: objects/gui_kde_wid.o 2528objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc 2529 $(CCC) -o $@ gui_kde_wid_moc.cc 2530 2531kvim_iface_skel.cc: objects/gui_kde_wid.o 2532objects/kvim_iface_skel.o: kvim_iface_skel.cc 2533 $(CCC) -o $@ kvim_iface_skel.cc 2534 2535objects/netbeans.o: netbeans.c 2536 $(CCC) -o $@ netbeans.c 2537 2538Makefile: 2539 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2540 2541############################################################################### 2542### MacOS X installation 2543### 2544### This installs a runnable Vim.app in $(prefix) 2545 2546REZ = /Developer/Tools/Rez 2547RESDIR = $(APPDIR)/Contents/Resources 2548VERSION = $(VIMMAJOR).$(VIMMINOR) 2549 2550### Common flags 2551M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2552 -DAPP_VER=$(VERSION) -DICON_APP=$(ICON_APP) 2553 2554### Icons 2555ICON_APP = gui_mac.icns 2556ICONS = $(RESDIR)/$(ICON_APP) 2557 2558# If you uncomment the following lines the *.icns in the src directory will be 2559# detected by this Makefile automatically, and used for Vim. 2560#ICON_APP = $(shell if [ -e app.icns ] ; then echo app.icns ; else echo gui_mac.icns ; fi) 2561#ICON_DOC = $(shell if [ -e doc.icns ] ; then echo doc.icns ; else echo ; fi) 2562#ICON_DOCTXT = $(shell if [ -e doc-txt.icns ] ; then echo doc-txt.icns ; else echo ; fi) 2563#ICONS = $(addprefix $(RESDIR)/, $(ICON_APP) $(ICON_DOC) $(ICON_DOCTXT)) 2564 2565install_macosx: gui_bundle 2566# Remove the link to the runtime dir, don't want to copy all of that. 2567 -rm $(APPDIR)/runtime 2568 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2569# Install the runtime files. Recursive! 2570 -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/runtime 2571 -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2572 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2573 VIMEXE=$$srcdir/$(VIMTARGET) \ 2574 prefix=$(DESTDIR)$(prefix)/$(APPDIR) \ 2575 VIMRTLOC=$(DESTDIR)$(prefix)/$(APPDIR)/runtime 2576# Put the link back. 2577 ln -s `pwd`/../runtime $(APPDIR) 2578# TODO: Create the vimtutor application. 2579 2580gui_bundle: $(APPDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2581 bundle-language 2582 2583$(APPDIR): 2584 mkdir -p $@ 2585 2586bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2587 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2588# Make a link to the runtime directory, so that we can try out the executable 2589# without installing it. 2590 -ln -s `pwd`/../runtime $(APPDIR) 2591 2592bundle-executable: $(VIMTARGET) 2593 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2594 2595bundle-info: bundle-dir 2596 @echo "Creating PkgInfo" 2597 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2598 @echo "Creating Info.plist" 2599 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2600 2601bundle-resource: bundle-dir bundle-icons bundle-rsrc 2602 2603bundle-icons: $(ICONS) 2604 2605### Classic resources 2606# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2607# This file is also required for OS X Vim. 2608bundle-rsrc: os_mac.rsr.hqx 2609 @echo "Creating resource fork" 2610 python dehqx.py $< 2611 rm -f gui_mac.rsrc 2612 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2613 2614# po/Make_osx.pl says something about generating a Mac message file 2615# for Ukrananian. Would somebody using Mac OS X in Ukranian 2616# *really* be upset that Carbon Vim was not localised in 2617# Ukranian? 2618# 2619#bundle-language: bundle-dir po/Make_osx.pl 2620# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2621bundle-language: bundle-dir 2622 2623$(APPDIR)/Contents: 2624 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2625 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2626 2627$(RESDIR)/%.icns: %.icns 2628 cp $< $@ 2629 2630 2631############################################################################### 2632### (automatically generated by 'make depend') 2633### Dependencies: 2634objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2635 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2636 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2637 arabic.h if_sniff.h version.h 2638objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2639 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2640 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2641 arabic.h if_sniff.h 2642objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2643 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2644 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2645 arabic.h if_sniff.h 2646objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2647 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2648 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2649 arabic.h if_sniff.h 2650objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2651 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2652 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2653 arabic.h if_sniff.h 2654objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2655 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2656 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2657 arabic.h if_sniff.h version.h 2658objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2659 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2660 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2661 arabic.h if_sniff.h version.h 2662objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2663 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2664 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2665 farsi.h arabic.h if_sniff.h version.h 2666objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2667 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2668 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2669 farsi.h arabic.h if_sniff.h 2670objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2671 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2672 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2673 arabic.h if_sniff.h 2674objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2675 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2676 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2677 farsi.h arabic.h if_sniff.h 2678objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2679 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2680 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2681 arabic.h if_sniff.h 2682objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2683 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2684 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2685 arabic.h if_sniff.h 2686objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2687 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2688 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2689 arabic.h if_sniff.h 2690objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2691 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2692 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2693 farsi.h arabic.h if_sniff.h version.h 2694objects/hashtable.o: hashtable.c vim.h auto/config.h feature.h os_unix.h \ 2695 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2696 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2697 farsi.h arabic.h if_sniff.h 2698objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2699 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2700 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2701 farsi.h arabic.h if_sniff.h if_cscope.h 2702objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2703 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2704 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2705 farsi.h arabic.h if_sniff.h version.h 2706objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2707 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2708 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2709 arabic.h if_sniff.h farsi.c arabic.c 2710objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2711 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2712 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2713 arabic.h if_sniff.h 2714objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2715 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2716 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2717 arabic.h if_sniff.h 2718objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2719 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2720 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2721 arabic.h if_sniff.h 2722objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2723 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2724 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2725 arabic.h if_sniff.h 2726objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2727 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2728 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2729 arabic.h if_sniff.h 2730objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2731 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2732 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2733 arabic.h if_sniff.h version.h 2734objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2735 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2736 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2737 arabic.h if_sniff.h 2738objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2739 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2740 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2741 arabic.h if_sniff.h 2742objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2743 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2744 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2745 arabic.h if_sniff.h 2746objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2747 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2748 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2749 arabic.h if_sniff.h 2750objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2751 keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2752 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2753 arabic.h if_sniff.h 2754objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2755 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2756 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2757 arabic.h if_sniff.h 2758objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2759 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2760 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2761 arabic.h if_sniff.h os_unixx.h 2762objects/pathdef.o: auto/pathdef.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \ 2763 ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./structs.h \ 2764 ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro ./option.h \ 2765 ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h ./if_sniff.h 2766objects/popupmenu.o: popupmenu.c vim.h auto/config.h feature.h os_unix.h \ 2767 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2768 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2769 farsi.h arabic.h if_sniff.h 2770objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2771 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2772 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2773 farsi.h arabic.h if_sniff.h 2774objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2775 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2776 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2777 arabic.h if_sniff.h 2778objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2779 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2780 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2781 arabic.h if_sniff.h 2782objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2783 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2784 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2785 arabic.h if_sniff.h 2786objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2787 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2788 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2789 arabic.h if_sniff.h 2790objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2791 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2792 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2793 arabic.h if_sniff.h 2794objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2795 keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2796 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2797 arabic.h if_sniff.h 2798objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2799 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2800 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2801 arabic.h if_sniff.h 2802objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2803 keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2804 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2805 arabic.h if_sniff.h 2806objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2807 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2808 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2809 arabic.h if_sniff.h 2810objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2811 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2812 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2813 arabic.h if_sniff.h version.h 2814objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2815 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2816 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2817 arabic.h if_sniff.h 2818objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2819 keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2820 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2821 arabic.h if_sniff.h 2822objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 2823 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2824 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2825 farsi.h arabic.h if_sniff.h ../pixmaps/stock_icons.h 2826objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2827 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2828 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2829 farsi.h arabic.h if_sniff.h gui_gtk_f.h 2830objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2831 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2832 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2833 farsi.h arabic.h if_sniff.h gui_xmebw.h ../pixmaps/alert.xpm \ 2834 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 2835 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 2836 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2837 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2838 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2839 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2840 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2841 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2842 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2843 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2844 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2845 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2846 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2847 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2848 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2849 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2850 ../pixmaps/tb_minwidth.xpm 2851objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 2852 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2853 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2854 farsi.h arabic.h if_sniff.h 2855objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 2856 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2857 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2858 farsi.h arabic.h if_sniff.h gui_xmebwp.h gui_xmebw.h 2859objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2860 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2861 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2862 farsi.h arabic.h if_sniff.h gui_at_sb.h gui_x11_pm.h \ 2863 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 2864 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 2865 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2866 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2867 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2868 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2869 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2870 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2871 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2872 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2873 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2874 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2875 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2876 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2877 ../pixmaps/tb_minwidth.xpm 2878objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2879 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2880 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2881 farsi.h arabic.h if_sniff.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2882 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2883objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2884 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2885 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2886 arabic.h if_sniff.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 2887 ../runtime/vim48x48.xpm 2888objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 2889 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2890 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2891 farsi.h arabic.h if_sniff.h gui_at_sb.h 2892objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 2893 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2894 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2895 farsi.h arabic.h if_sniff.h gui_at_sb.h 2896objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2897 keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2898 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2899 arabic.h if_sniff.h 2900objects/gui_kde.o: gui_kde.cc gui_kde_wid.h kvim_iface.h vim.h auto/config.h \ 2901 feature.h os_unix.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2902 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2903 globals.h farsi.h arabic.h if_sniff.h ../pixmaps/tb_new.xpm \ 2904 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2905 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2906 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2907 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2908 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2909 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2910 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2911 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2912 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2913 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2914 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2915 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2916 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2917 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2918 ../pixmaps/tb_minwidth.xpm 2919objects/gui_kde_wid.o: gui_kde_wid.cc gui_kde_wid.h kvim_iface.h vim.h \ 2920 auto/config.h feature.h os_unix.h ascii.h keymap.h term.h macros.h \ 2921 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h \ 2922 ex_cmds.h proto.h globals.h farsi.h arabic.h if_sniff.h version.h \ 2923 proto/../../pixmaps/alert.xpm proto/../../pixmaps/error.xpm \ 2924 proto/../../pixmaps/generic.xpm proto/../../pixmaps/info.xpm \ 2925 proto/../../pixmaps/quest.xpm 2926objects/gui_kde_x11.o: gui_kde_x11.cc gui_kde_wid.h kvim_iface.h vim.h \ 2927 auto/config.h feature.h os_unix.h ascii.h keymap.h term.h macros.h \ 2928 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h \ 2929 ex_cmds.h proto.h globals.h farsi.h arabic.h if_sniff.h version.h 2930objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 2931 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2932 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2933 farsi.h arabic.h if_sniff.h 2934objects/if_perl.o: auto/if_perl.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \ 2935 ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./structs.h \ 2936 ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro ./option.h \ 2937 ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h ./if_sniff.h 2938objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 2939 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2940 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2941 farsi.h arabic.h if_sniff.h 2942objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 2943 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2944 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2945 farsi.h arabic.h if_sniff.h 2946objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2947 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2948 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2949 arabic.h if_sniff.h 2950objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2951 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2952 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2953 arabic.h if_sniff.h version.h 2954objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 2955 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2956 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2957 farsi.h arabic.h if_sniff.h os_unixx.h 2958objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 2959 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2960 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2961 farsi.h arabic.h if_sniff.h 2962objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 2963 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \ 2964 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \ 2965 proto.h globals.h farsi.h arabic.h if_sniff.h version.h workshop.h 2966objects/wsdebug.o: wsdebug.c 2967objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 2968 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2969 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2970 farsi.h arabic.h if_sniff.h integration.h 2971objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 2972 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h \ 2973 gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h \ 2974 farsi.h arabic.h if_sniff.h version.h 2975
