1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 235# Sun curses library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284######################## auto/config.mk ######################## {{{1 285# At this position auto/config.mk is included. When starting from the 286# toplevel Makefile it is almost empty. After running auto/configure it 287# contains settings that have been discovered for your system. Settings below 288# this include override settings in auto/config.mk! 289 290# Note: If make fails because auto/config.mk does not exist (it is not 291# included in the repository), do: 292# cp config.mk.dist auto/config.mk 293 294# (X) How to include auto/config.mk depends on the version of "make" you have, 295# if the current choice doesn't work, try the other one. 296 297include auto/config.mk 298#.include "auto/config.mk" 299CClink = $(CC) 300 301#}}} 302 303# Include the configuration choices first, so we can override everything 304# below. As shipped, this file contains a target that causes to run 305# configure. Once configure was run, this file contains a list of 306# make variables with predefined values instead. Thus any second invocation 307# of make, will build Vim. 308 309# CONFIGURE - configure arguments {{{1 310# You can give a lot of options to configure. 311# Change this to your desire and do 'make config' afterwards 312 313# examples (can only use one!): 314#CONF_ARGS = --exec-prefix=/usr 315#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 316#CONF_ARGS = --with-global-runtime=/etc/vim 317#CONF_ARGS = --with-local-dir=/usr/share 318#CONF_ARGS = --without-local-dir 319 320# Use this one if you distribute a modified version of Vim. 321#CONF_ARGS = --with-modified-by="John Doe" 322 323# GUI - For creating Vim with GUI (gvim) (B) 324# Uncomment this line when you don't want to get the GUI version, although you 325# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 326# at all. 327#CONF_OPT_GUI = --disable-gui 328 329# Uncomment one of these lines if you have that GUI but don't want to use it. 330# The automatic check will use another one that can be found. 331# Gnome is disabled by default, it may cause trouble. 332#CONF_OPT_GUI = --disable-gtk2-check 333#CONF_OPT_GUI = --enable-gnome2-check 334#CONF_OPT_GUI = --disable-motif-check 335#CONF_OPT_GUI = --disable-athena-check 336#CONF_OPT_GUI = --disable-nextaw-check 337 338# Uncomment one of these lines to select a specific GUI to use. 339# When using "yes" or nothing, configure will use the first one found: GTK+, 340# Motif or Athena. 341# 342# GTK versions that are known not to work 100% are rejected. 343# Use "--disable-gtktest" to accept them anyway. 344# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 345# 346# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 347# is used then GNOME will automatically be used if it is found. If you have 348# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 349# --enable-gui=gtk or leave out --enable-gnome-check. 350# 351# If the selected GUI isn't found, the GUI is disabled automatically 352#CONF_OPT_GUI = --enable-gui=gtk2 353#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 354#CONF_OPT_GUI = --enable-gui=gnome2 355#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 356#CONF_OPT_GUI = --enable-gui=motif 357#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 358#CONF_OPT_GUI = --enable-gui=athena 359#CONF_OPT_GUI = --enable-gui=nextaw 360 361# Carbon GUI for Mac OS X 362#CONF_OPT_GUI = --enable-gui=carbon 363 364# DARWIN - detecting Mac OS X 365# Uncomment this line when you want to compile a Unix version of Vim on 366# Darwin. None of the Mac specific options or files will be used. 367#CONF_OPT_DARWIN = --disable-darwin 368 369# Select the architecture supported. Default is to build for the current 370# platform. Use "both" for a universal binary. That probably doesn't work 371# when including Perl, Python, etc. 372#CONF_OPT_DARWIN = --with-mac-arch=i386 373#CONF_OPT_DARWIN = --with-mac-arch=ppc 374#CONF_OPT_DARWIN = --with-mac-arch=both 375 376# Uncomment the next line to fail if one of the requested language interfaces 377# cannot be configured. Without this Vim will be build anyway, without 378# the failing interfaces. 379#CONF_OPT_FAIL = --enable-fail-if-missing 380 381# LUA 382# Uncomment one of these when you want to include the Lua interface. 383# First one is for static linking, second one for dynamic loading. 384#CONF_OPT_LUA = --enable-luainterp 385#CONF_OPT_LUA = --enable-luainterp=dynamic 386# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 387#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 388 389# MZSCHEME 390# Uncomment this when you want to include the MzScheme interface. 391#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 392# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 393#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 394#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 395#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 396 397# PERL 398# Uncomment one of these when you want to include the Perl interface. 399# First one is for static linking, second one for dynamic loading. 400# The Perl option sometimes causes problems, because it adds extra flags 401# 402# to the command line. If you see strange flags during compilation, check in 403# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 404# the next line. 405# When you get an error for a missing "perl.exp" file, try creating an empty 406# one: "touch perl.exp". 407# This requires at least "small" features, "tiny" doesn't work. 408#CONF_OPT_PERL = --enable-perlinterp 409#CONF_OPT_PERL = --enable-perlinterp=dynamic 410 411# PYTHON 412# Uncomment this when you want to include the Python interface. 413# Requires small features or better, fails with tiny features. 414# NOTE: This may cause threading to be enabled, which has side effects (such 415# as using different libraries and debugging becomes more difficult). 416# NOTE: Using this together with Perl may cause a crash in initialization. 417# For Python3 support make a symbolic link in /usr/local/bin: 418# ln -s python3 python3.1 419# If both python2.x and python3.x are enabled then the linking will be via 420# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 421# However, this may still cause problems, such as "import termios" failing. 422# Build two separate versions of Vim in that case. 423#CONF_OPT_PYTHON = --enable-pythoninterp 424#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 425#CONF_OPT_PYTHON3 = --enable-python3interp 426#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 427 428# RUBY 429# Uncomment this when you want to include the Ruby interface. 430# First one for static linking, second one for loading when used. 431# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 432#CONF_OPT_RUBY = --enable-rubyinterp 433#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 434#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 435 436# TCL 437# Uncomment this when you want to include the Tcl interface. 438#CONF_OPT_TCL = --enable-tclinterp 439#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 440 441# CSCOPE 442# Uncomment this when you want to include the Cscope interface. 443#CONF_OPT_CSCOPE = --enable-cscope 444 445# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 446#CONF_OPT_WORKSHOP = --enable-workshop 447 448# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 449# Motif version must have XPM libraries (see |workshop-xpm|). 450# Uncomment this when you do not want the netbeans interface. 451#CONF_OPT_NETBEANS = --disable-netbeans 452 453# SNIFF - Include support for SNiFF+. 454#CONF_OPT_SNIFF = --enable-sniff 455 456# MULTIBYTE - To edit multi-byte characters. 457# Uncomment this when you want to edit a multibyte language. 458# It's automatically enabled with normal features, GTK or IME support. 459# Note: Compile on a machine where setlocale() actually works, otherwise the 460# configure tests may fail. 461#CONF_OPT_MULTIBYTE = --enable-multibyte 462 463# NLS - National Language Support 464# Uncomment this when you do not want to support translated messages, even 465# though configure can find support for it. 466#CONF_OPT_NLS = --disable-nls 467 468# XIM - X Input Method. Special character input support for X11 (Chinese, 469# Japanese, special symbols, etc). Also needed for dead-key support. 470# When omitted it's automatically enabled for the X-windows GUI. 471# HANGUL - Input Hangul (Korean) language using internal routines. 472# Uncomment one of these when you want to input a multibyte language. 473#CONF_OPT_INPUT = --enable-xim 474#CONF_OPT_INPUT = --disable-xim 475#CONF_OPT_INPUT = --enable-hangulinput 476 477# FONTSET - X fontset support for output of languages with many characters. 478# Uncomment this when you want to output a multibyte language. 479#CONF_OPT_OUTPUT = --enable-fontset 480 481# ACL - Uncomment this when you do not want to include ACL support, even 482# though your system does support it. E.g., when it's buggy. 483#CONF_OPT_ACL = --disable-acl 484 485# gpm - For mouse support on Linux console via gpm 486# Uncomment this when you do not want to include gpm support, even 487# though you have gpm libraries and includes. 488#CONF_OPT_GPM = --disable-gpm 489 490# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 491# Uncomment this when you do not want do include sysmouse support, even 492# though you have /dev/sysmouse and includes. 493#CONF_OPT_SYSMOUSE = --disable-sysmouse 494 495# FEATURES - For creating Vim with more or less features 496# Uncomment one of these lines when you want to include few to many features. 497# The default is "normal". 498#CONF_OPT_FEAT = --with-features=tiny 499#CONF_OPT_FEAT = --with-features=small 500#CONF_OPT_FEAT = --with-features=normal 501#CONF_OPT_FEAT = --with-features=big 502#CONF_OPT_FEAT = --with-features=huge 503 504# COMPILED BY - For including a specific e-mail address for ":version". 505#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 506 507# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 508# (otherwise Vim configure will try to include xterm titlebar access) 509# Also disable the GUI above, otherwise it will be included anyway. 510# When both GUI and X11 have been disabled this may save about 15% of the 511# code and make Vim startup quicker. 512#CONF_OPT_X = --without-x 513 514# X WINDOWS DIRECTORY - specify X directories 515# If configure can't find you X stuff, or if you have multiple X11 derivatives 516# installed, you may wish to specify which one to use. 517# Select nothing to let configure choose. 518# This here selects openwin (as found on sun). 519#XROOT = /usr/openwin 520#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 521 522# X11 Session Management Protocol support 523# Vim will try to use XSMP to catch the user logging out if there are unsaved 524# files. Uncomment this line to disable that (it prevents vim trying to open 525# communications with the session manager). 526#CONF_OPT_XSMP = --disable-xsmp 527 528# You may wish to include xsmp but use exclude xsmp-interact if the logout 529# XSMP functionality does not work well with your session-manager (at time of 530# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 531# applications after Vim has cancelled a logout (until Vim quits). This 532# *might* be the Vim code, but is more likely a bug in early GNOME-1. 533# This disables the dialog that asks you if you want to save files or not. 534#CONF_OPT_XSMP = --disable-xsmp-interact 535 536# COMPILER - Name of the compiler {{{1 537# The default from configure will mostly be fine, no need to change this, just 538# an example. If a compiler is defined here, configure will use it rather than 539# probing for one. It is dangerous to change this after configure was run. 540# Make will use your choice then -- but beware: Many things may change with 541# another compiler. It is wise to run 'make reconfig' to start all over 542# again. 543#CC = cc 544#CC = gcc 545 546# COMPILER FLAGS - change as you please. Either before running {{{1 547# configure or afterwards. For examples see below. 548# When using -g with some older versions of Linux you might get a 549# statically linked executable. 550# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 551#CFLAGS = -g 552#CFLAGS = -O 553 554# Optimization limits - depends on the compiler. Automatic check in configure 555# doesn't work very well, because many compilers only give a warning for 556# unrecognized arguments. 557#CFLAGS = -O -OPT:Olimit=2600 558#CFLAGS = -O -Olimit 2000 559#CFLAGS = -O -FOlimit,2000 560 561# Often used for GCC: mixed optimizing, lot of optimizing, debugging 562#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 563#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 564#CFLAGS = -g -Wall -Wmissing-prototypes 565#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 566#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 567#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 568 569# Use this with GCC to check for mistakes, unused arguments, etc. 570#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 571#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG 572#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 573#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 574 575# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 576# allocated memory (and makes every malloc()/free() very slow). 577# Electric Fence is free (search ftp sites). 578# You may want to set the EF_PROTECT_BELOW environment variable to check the 579# other side of allocated memory. 580# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 581# as root: sysctl -w vm.max_proc_mmap=30000 582#EXTRA_LIBS = /usr/local/lib/libefence.a 583 584# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 585#PURIFY = purify 586 587# NBDEBUG - debugging the netbeans interface. 588#EXTRA_DEFS = -DNBDEBUG 589 590# }}} 591 592# LINT - for running lint 593# For standard Unix lint 594LINT = lint 595LINT_OPTIONS = -beprxzF 596# For splint 597# It doesn't work well, crashes on include files and non-ascii characters. 598#LINT = splint 599#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 600 601# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 602# Might not work with GUI or Perl. 603# For unknown reasons adding "-lc" fixes a linking problem with some versions 604# of GCC. That's probably a bug in the "-pg" implementation. 605# After running Vim see the profile result with: gprof vim gmon.out | vim - 606# Need to recompile everything after changing this: "make clean" "make". 607#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 608#PROFILE_LIBS = -pg 609#PROFILE_LIBS = -pg -lc 610 611# MEMORY LEAK DETECTION 612# Requires installing the ccmalloc library. 613# Configuration is in the .ccmalloc or ~/.ccmalloc file. 614# Doesn't work very well, since memory linked to from global variables 615# (in libraries) is also marked as leaked memory. 616#LEAK_CFLAGS = -DEXITFREE 617#LEAK_LIBS = -lccmalloc 618 619##################################################### 620### Specific systems, check if yours is listed! ### {{{ 621##################################################### 622 623### Uncomment things here only if the values chosen by configure are wrong. 624### It's better to adjust configure.in and "make autoconf", if you can! 625### Then send the required changes to configure.in to the bugs list. 626 627### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 628### 629#CC = shlicc2 630#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 631 632### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 633### The first probably works on all systems 634### The second should work a bit better on newer systems 635### The third should work a bit better on HPUX 11.11 636### Information provided by: Richard Allen <[email protected]> 637#CC = c89 -D_HPUX_SOURCE 638#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 639#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 640 641### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 642### when the default (ISO) digraphs look completely wrong. 643### After changing this do "touch digraph.c; make". 644#EXTRA_DEFS = -DHPUX_DIGRAPHS 645 646### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 647### is too small to compile many routines. It produces too much defining 648### and no space errors. 649### Uncomment the following to specify a larger macro definition table. 650#CFLAGS = -Wp,-H256000 651 652### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 653### libraries in /usr/lib instead of /lib (avoiding transition links). 654### Information provided by: David Green 655#XROOT = /usr 656#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 657#GUI_INC_LOC = -I/usr/include/Motif1.2 658#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 659 660### (5) AIX 4.1.4 with cc 661#CFLAGS = -O -qmaxmem=8192 662 663### AIX with c89 (Walter Briscoe) 664#CC = c89 665#CPPFLAGS = -D_ALL_SOURCE 666 667### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 668# needed to avoid a problem where strings.h gets included 669#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 670 671### (W) Solaris with multi-threaded libraries (-lthread): 672### If suspending doesn't work properly, try using this line: 673#EXTRA_DEFS = -D_REENTRANT 674 675### (7) Solaris 2.4/2.5 with Centerline compiler 676#CC = clcc 677#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 678#CFLAGS = -O 679 680### (9) Solaris 2.x with cc (SunPro), using Athena. 681### Only required for compiling gui_at_sb.c. 682### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 683### Use one of the lines (either Full ANSI or no ANSI at all) 684#CFLAGS = $(CFLAGS) -Xc 685#CFLAGS = $(CFLAGS) -Xs 686 687### Solaris 2.3 with X11 and specific cc 688#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 689 690### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 691#CC = /usr/ucb/cc 692#EXTRA_LIBS = -R/usr/ucblib 693 694### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 695# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 696#CC = cc 697#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 698#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 699#XPM_IPATH = -I$(XPM_DIR)/include 700#EXTRA_LIBS = $(XPM_LIB) 701#EXTRA_IPATHS = $(XPM_IPATH) 702#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 703 704### Solaris with workshop compilers: Vim is unstable when compiled with 705# "-fast". Use this instead. (Shea Martin) 706#CFLAGS = -x02 -xtarget=ultra 707 708### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 709#LDFLAGS = -lw -ldl -lXmu 710#GUI_LIB_LOC = -L/usr/local/lib 711 712### (8) Unisys 6035 (Glauber Ribeiro) 713#EXTRA_LIBS = -lnsl -lsocket -lgen 714 715### When builtin functions cause problems with gcc (for Sun 4.1.x) 716#CFLAGS = -O2 -Wall -traditional -Wno-implicit 717 718### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 719#EXTRA_DEFS = -DDOMAIN 720#CFLAGS= -O -A systype,bsd4.3 721 722### Coherent 4.2.10 on Intel 386 platform 723#EXTRA_DEFS = -Dvoid=int 724#EXTRA_LIBS = -lterm -lsocket 725 726### SCO 3.2, with different library name for terminfo 727#EXTRA_LIBS = -ltinfo 728 729### UTS2 for Amdahl UTS 2.1.x 730#EXTRA_DEFS = -DUTS2 731#EXTRA_LIBS = -lsocket 732 733### UTS4 for Amdahl UTS 4.x 734#EXTRA_DEFS = -DUTS4 -Xa 735 736### USL for Unix Systems Laboratories (SYSV 4.2) 737#EXTRA_DEFS = -DUSL 738 739### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 740#CC= gcc -D_POSIX_SOURCE 741#CFLAGS= -O2 742#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 743 744### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 745### Also use the CONF_TERM_LIB below! 746#EXTRA_LIBS = -lgen 747 748### (D) QNX (by G.F. Desrochers) 749#CFLAGS = -g -O -mf -4 750 751### (F) QNX (by John Oleynick) 752# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 753# CONF_OPT_X = --without-x. 754# 2. make config 755# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 756# have -ldir (does config find it somewhere?) and -ltermcap has at 757# least one problem so I use termlib.o instead. The problem with 758# termcap is that it segfaults if you call it with the name of 759# a non-existent terminal type. 760# 4. edit auto/config.h and add #define USE_TMPNAM 761# 5. add termlib.o to OBJ 762# 6. make 763 764### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 765#EXTRA_LIBS = -lgen 766 767### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 768#EXTRA_LIBS = -lgen -lnsl 769### For SINIX-Y this is needed for the right prototype of gettimeofday() 770#EXTRA_DEFS = -D_XPG_IV 771 772### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 773# Use both "-F O3" lines for optimization or the "-g" line for debugging 774#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 775#CFLAGS = -F O3 -DSINIXN 776#LDFLAGS = -F O3 777#CFLAGS = -g -DSINIXN 778 779### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 780#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 781#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 782 783### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 784#GUI_INC_LOC = -I/usr/include 785#GUI_LIB_LOC = -L/usr/lib 786#EXTRA_LIBS = -lgen 787 788### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 789#GUI_INC_LOC = -I/usr/necccs/include 790#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 791#XROOT = /usr/necccs 792#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 793#EXTRA_LIBS = -lsocket -lgen 794 795### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 796# Not needed for Irix 5.3, Ives Aerts reported 797#EXTRA_LIBS = -lmalloc -lc_s 798# Irix 4.0, when regexp and regcmp cannot be found when linking: 799#EXTRA_LIBS = -lmalloc -lc_s -lPW 800 801### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 802# Note: This newer option style is used with the MipsPro compilers ONLY if 803# you are compiling an "n32" or "64" ABI binary (use either a -n32 804# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 805# then the CFLAGS option format will be the typical style (i.e. 806# -Olimit 3000). 807#CFLAGS = -OPT:Olimit=3000 -O 808 809### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 810# compiler features! Beware, the optimization is EXTREMELY thorough 811# and takes quite a long time. 812# Note: See the note above. Here, the -mips3 option automatically 813# enables either the "n32" or "64" ABI, depending on what machine you 814# are compiling on (n32 is explicitly enabled here, just to make sure). 815#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 816#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 817 818### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 819### Suggested by Jon Wright <[email protected]>. 820### Tested on R8000 IRIX6.1 Power Indigo2. 821### Check /etc/compiler.defaults for your compiler settings. 822# either (for 64 bit pointers) uncomment the following line 823#GUI_LIB_LOC = -L/usr/lib64 824# then 825# 1) make config 826# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 827# 3) make 828# 829# or (for 32bit pointers) uncomment the following line 830#EXTRA_DEFS = -n32 831#GUI_LIB_LOC = -L/usr/lib32 832# then 833# 1) make config 834# 2) edit auto/config.mk, add -n32 to LDFLAGS 835# 3) make 836# 837#Alternatively: use -o32 instead of -n32. 838### 839 840### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 841### which is found by configure, doesn't work correctly. Symptom is the 842### error message "Termcap entry too long". Uncomment the next line. 843### On AIX 4.2.1 (and other versions probably), libtermcap is reported 844### not to display properly. 845### after changing this, you need to do "make reconfig". 846#CONF_TERM_LIB = --with-tlib=curses 847 848### (E) If you want to use termlib library instead of the automatically found 849### one. After changing this, you need to do "make reconfig". 850#CONF_TERM_LIB = --with-tlib=termlib 851 852### (a) ESIX V4.2 (Reinhard Wobst) 853#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 854 855### (c) Tandem/NSK (Matthew Woehlke) 856#EXTRA_LIBS = -lfloss 857 858### If you want to use ncurses library instead of the automatically found one 859### after changing this, you need to do "make reconfig". 860#CONF_TERM_LIB = --with-tlib=ncurses 861 862### For GCC on MSDOS, the ".exe" suffix will be added. 863#EXEEXT = .exe 864#LNKEXT = .exe 865 866### (O) For LynxOS 2.5.0, tested on PC. 867#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 868### For LynxOS 3.0.1, tested on PPC 869#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 870### For LynxOS 3.1.0, tested on PC 871#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 872 873 874### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 875### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 876#CFLAGS = -O -Qtarget=m88110compat 877#EXTRA_LIBS = -lgen 878 879# The value of QUOTESED comes from auto/config.mk. 880# Uncomment the next line to use the default value. 881# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 882 883##################### end of system specific lines ################### }}} 884 885### Names of the programs and targets {{{1 886VIMTARGET = $(VIMNAME)$(EXEEXT) 887EXTARGET = $(EXNAME)$(LNKEXT) 888VIEWTARGET = $(VIEWNAME)$(LNKEXT) 889GVIMNAME = g$(VIMNAME) 890GVIMTARGET = $(GVIMNAME)$(LNKEXT) 891GVIEWNAME = g$(VIEWNAME) 892GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 893RVIMNAME = r$(VIMNAME) 894RVIMTARGET = $(RVIMNAME)$(LNKEXT) 895RVIEWNAME = r$(VIEWNAME) 896RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 897RGVIMNAME = r$(GVIMNAME) 898RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 899RGVIEWNAME = r$(GVIEWNAME) 900RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 901VIMDIFFNAME = $(VIMNAME)diff 902GVIMDIFFNAME = g$(VIMDIFFNAME) 903VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 904GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 905EVIMNAME = e$(VIMNAME) 906EVIMTARGET = $(EVIMNAME)$(LNKEXT) 907EVIEWNAME = e$(VIEWNAME) 908EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 909 910### Names of the tools that are also made {{{1 911TOOLS = xxd/xxd$(EXEEXT) 912 913### Installation directories. The defaults come from configure. {{{1 914# 915### prefix the top directory for the data (default "/usr/local") 916# 917# Uncomment the next line to install Vim in your home directory. 918#prefix = $(HOME) 919 920### exec_prefix is the top directory for the executable (default $(prefix)) 921# 922# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 923#exec_prefix = /usr/machine 924 925### BINDIR dir for the executable (default "$(exec_prefix)/bin") 926### MANDIR dir for the manual pages (default "$(prefix)/man") 927### DATADIR dir for the other files (default "$(prefix)/lib" or 928# "$(prefix)/share") 929# They may be different when using different architectures for the 930# executable and a common directory for the other files. 931# 932# Uncomment the next line to install Vim in "/usr/bin" 933#BINDIR = /usr/bin 934# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 935#MANDIR = /usr/share/man 936# Uncomment the next line to install Vim help files in "/usr/share/vim" 937#DATADIR = /usr/share 938 939### DESTDIR root of the installation tree. This is prepended to the other 940# directories. This directory must exist. 941#DESTDIR = ~/pkg/vim 942 943### Directory of the man pages 944MAN1DIR = /man1 945 946### Vim version (adjusted by a script) 947VIMMAJOR = 7 948VIMMINOR = 3 949 950### Location of Vim files (should not need to be changed, and {{{1 951### some things might not work when they are changed!) 952VIMDIR = /vim 953VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 954HELPSUBDIR = /doc 955COLSUBDIR = /colors 956SYNSUBDIR = /syntax 957INDSUBDIR = /indent 958AUTOSUBDIR = /autoload 959PLUGSUBDIR = /plugin 960FTPLUGSUBDIR = /ftplugin 961LANGSUBDIR = /lang 962COMPSUBDIR = /compiler 963KMAPSUBDIR = /keymap 964MACROSUBDIR = /macros 965TOOLSSUBDIR = /tools 966TUTORSUBDIR = /tutor 967SPELLSUBDIR = /spell 968PRINTSUBDIR = /print 969PODIR = po 970 971### VIMLOC common root of the Vim files (all versions) 972### VIMRTLOC common root of the runtime Vim files (this version) 973### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 974### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 975### HELPSUBLOC location for help files 976### COLSUBLOC location for colorscheme files 977### SYNSUBLOC location for syntax files 978### INDSUBLOC location for indent files 979### AUTOSUBLOC location for standard autoload files 980### PLUGSUBLOC location for standard plugin files 981### FTPLUGSUBLOC location for ftplugin files 982### LANGSUBLOC location for language files 983### COMPSUBLOC location for compiler files 984### KMAPSUBLOC location for keymap files 985### MACROSUBLOC location for macro files 986### TOOLSSUBLOC location for tools files 987### TUTORSUBLOC location for tutor files 988### SPELLSUBLOC location for spell files 989### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 990### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 991### You can override these if you want to install them somewhere else. 992### Edit feature.h for compile-time settings. 993VIMLOC = $(DATADIR)$(VIMDIR) 994VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 995VIMRCLOC = $(VIMLOC) 996HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 997COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 998SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 999INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1000AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1001PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1002FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1003LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1004COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1005KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1006MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1007TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1008TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1009SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1010PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1011SCRIPTLOC = $(VIMRTLOC) 1012 1013### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1014### the runtime directory is not below it. 1015#VIMRUNTIMEDIR = $(VIMRTLOC) 1016 1017### Name of the evim file target. 1018EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1019MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1020 1021### Name of the menu file target. 1022SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1023SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1024SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1025 1026### Name of the bugreport file target. 1027SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1028 1029### Name of the file type detection file target. 1030SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1031 1032### Name of the file type detection file target. 1033SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1034 1035### Name of the file type detection script file target. 1036SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1037 1038### Name of the ftplugin-on file target. 1039SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1040 1041### Name of the ftplugin-off file target. 1042SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1043 1044### Name of the indent-on file target. 1045SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1046 1047### Name of the indent-off file target. 1048SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1049 1050### Name of the option window script file target. 1051SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1052 1053# Program to install the program in the target directory. Could also be "mv". 1054INSTALL_PROG = cp 1055 1056# Program to install the data in the target directory. Cannot be "mv"! 1057INSTALL_DATA = cp 1058INSTALL_DATA_R = cp -r 1059 1060### Program to run on installed binary. Use the second one to disable strip. 1061#STRIP = strip 1062#STRIP = /bin/true 1063 1064### Permissions for binaries {{{1 1065BINMOD = 755 1066 1067### Permissions for man page 1068MANMOD = 644 1069 1070### Permissions for help files 1071HELPMOD = 644 1072 1073### Permissions for Perl and shell scripts 1074SCRIPTMOD = 755 1075 1076### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1077VIMSCRIPTMOD = 644 1078 1079### Permissions for all directories that are created 1080DIRMOD = 755 1081 1082### Permissions for all other files that are created 1083FILEMOD = 644 1084 1085# Where to copy the man and help files from 1086HELPSOURCE = ../runtime/doc 1087 1088# Where to copy the script files from (menu, bugreport) 1089SCRIPTSOURCE = ../runtime 1090 1091# Where to copy the colorscheme files from 1092COLSOURCE = ../runtime/colors 1093 1094# Where to copy the syntax files from 1095SYNSOURCE = ../runtime/syntax 1096 1097# Where to copy the indent files from 1098INDSOURCE = ../runtime/indent 1099 1100# Where to copy the standard plugin files from 1101AUTOSOURCE = ../runtime/autoload 1102 1103# Where to copy the standard plugin files from 1104PLUGSOURCE = ../runtime/plugin 1105 1106# Where to copy the ftplugin files from 1107FTPLUGSOURCE = ../runtime/ftplugin 1108 1109# Where to copy the macro files from 1110MACROSOURCE = ../runtime/macros 1111 1112# Where to copy the tools files from 1113TOOLSSOURCE = ../runtime/tools 1114 1115# Where to copy the tutor files from 1116TUTORSOURCE = ../runtime/tutor 1117 1118# Where to copy the spell files from 1119SPELLSOURCE = ../runtime/spell 1120 1121# Where to look for language specific files 1122LANGSOURCE = ../runtime/lang 1123 1124# Where to look for compiler files 1125COMPSOURCE = ../runtime/compiler 1126 1127# Where to look for keymap files 1128KMAPSOURCE = ../runtime/keymap 1129 1130# Where to look for print resource files 1131PRINTSOURCE = ../runtime/print 1132 1133# If you are using Linux, you might want to use this to make vim the 1134# default vi editor, it will create a link from vi to Vim when doing 1135# "make install". An existing file will be overwritten! 1136# When not using it, some make programs can't handle an undefined $(LINKIT). 1137#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1138LINKIT = @echo >/dev/null 1139 1140### 1141### GRAPHICAL USER INTERFACE (GUI). {{{1 1142### 'configure --enable-gui' can enable one of these for you if you did set 1143### a corresponding CONF_OPT_GUI above and have X11. 1144### Override configures choice by uncommenting all the following lines. 1145### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1146### for enabling the Athena or Motif GUI. 1147#GUI_SRC = $(NONE_SRC) 1148#GUI_OBJ = $(NONE_OBJ) 1149#GUI_DEFS = $(NONE_DEFS) 1150#GUI_IPATH = $(NONE_IPATH) 1151#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1152#GUI_LIBS1 = $(NONE_LIBS1) 1153#GUI_LIBS2 = $(NONE_LIBS2) 1154#GUI_INSTALL = $(NONE_INSTALL) 1155#GUI_TARGETS = $(NONE_TARGETS) 1156#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1157#GUI_TESTTARGET = $(NONE_TESTTARGET) 1158#GUI_BUNDLE = $(NONE_BUNDLE) 1159 1160# Without a GUI install the normal way. 1161NONE_INSTALL = install_normal 1162 1163### GTK GUI 1164GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1165 gui_beval.c 1166GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1167 objects/pty.o objects/gui_gtk_f.o \ 1168 objects/gui_beval.o 1169GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1170GTK_IPATH = $(GUI_INC_LOC) 1171GTK_LIBS_DIR = $(GUI_LIB_LOC) 1172GTK_LIBS1 = 1173GTK_LIBS2 = $(GTK_LIBNAME) 1174GTK_INSTALL = install_normal install_gui_extra 1175GTK_TARGETS = installglinks 1176GTK_MAN_TARGETS = yes 1177GTK_TESTTARGET = gui 1178GTK_BUNDLE = 1179 1180### Motif GUI 1181MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1182 gui_xmdlg.c gui_xmebw.c 1183MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1184 objects/pty.o objects/gui_beval.o \ 1185 objects/gui_xmdlg.o objects/gui_xmebw.o 1186MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1187MOTIF_IPATH = $(GUI_INC_LOC) 1188MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1189MOTIF_LIBS1 = 1190MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1191MOTIF_INSTALL = install_normal install_gui_extra 1192MOTIF_TARGETS = installglinks 1193MOTIF_MAN_TARGETS = yes 1194MOTIF_TESTTARGET = gui 1195MOTIF_BUNDLE = 1196 1197### Athena GUI 1198### Use Xaw3d to make the menus look a little bit nicer 1199#XAW_LIB = -lXaw3d 1200XAW_LIB = -lXaw 1201 1202### When using Xaw3d, uncomment/comment the following lines to also get the 1203### scrollbars from Xaw3d. 1204#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1205#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1206# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1207#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1208# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1209# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1210ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1211 gui_at_sb.c gui_at_fs.c 1212ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1213 objects/pty.o objects/gui_beval.o \ 1214 objects/gui_at_sb.o objects/gui_at_fs.o 1215ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1216 1217ATHENA_IPATH = $(GUI_INC_LOC) 1218ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1219ATHENA_LIBS1 = $(XAW_LIB) 1220ATHENA_LIBS2 = -lXt 1221ATHENA_INSTALL = install_normal install_gui_extra 1222ATHENA_TARGETS = installglinks 1223ATHENA_MAN_TARGETS = yes 1224ATHENA_TESTTARGET = gui 1225ATHENA_BUNDLE = 1226 1227### neXtaw GUI 1228NEXTAW_LIB = -lneXtaw 1229 1230NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1231NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1232 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1233NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1234 1235NEXTAW_IPATH = $(GUI_INC_LOC) 1236NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1237NEXTAW_LIBS1 = $(NEXTAW_LIB) 1238NEXTAW_LIBS2 = -lXt 1239NEXTAW_INSTALL = install_normal install_gui_extra 1240NEXTAW_TARGETS = installglinks 1241NEXTAW_MAN_TARGETS = yes 1242NEXTAW_TESTTARGET = gui 1243NEXTAW_BUNDLE = 1244 1245### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1246# errors: ld: Undefined symbol 1247# _get_wmShellWidgetClass 1248# _get_applicationShellWidgetClass 1249# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1250# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1251#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1252# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1253# too: 1254#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1255 1256# PHOTON GUI 1257PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1258PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1259PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1260PHOTONGUI_IPATH = 1261PHOTONGUI_LIBS_DIR = 1262PHOTONGUI_LIBS1 = -lph -lphexlib 1263PHOTONGUI_LIBS2 = 1264PHOTONGUI_INSTALL = install_normal install_gui_extra 1265PHOTONGUI_TARGETS = installglinks 1266PHOTONGUI_MAN_TARGETS = yes 1267PHOTONGUI_TESTTARGET = gui 1268PHOTONGUI_BUNDLE = 1269 1270# CARBON GUI 1271CARBONGUI_SRC = gui.c gui_mac.c 1272CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1273CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1274 -Wall -Wno-unknown-pragmas \ 1275 -mdynamic-no-pic -pipe 1276CARBONGUI_IPATH = -I. -Iproto 1277CARBONGUI_LIBS_DIR = 1278CARBONGUI_LIBS1 = -framework Carbon 1279CARBONGUI_LIBS2 = 1280CARBONGUI_INSTALL = install_macosx 1281CARBONGUI_TARGETS = 1282CARBONGUI_MAN_TARGETS = 1283CARBONGUI_TESTTARGET = gui 1284CARBONGUI_BUNDLE = gui_bundle 1285APPDIR = $(VIMNAME).app 1286CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1287 1288# All GUI files 1289ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1290ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1291 1292# }}} 1293 1294### Command to create dependencies based on #include "..." 1295### prototype headers are ignored due to -DPROTO, system 1296### headers #include <...> are ignored if we use the -MM option, as 1297### e.g. provided by gcc-cpp. 1298### Include FEAT_GUI to get dependency on gui.h 1299### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1300CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1301 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1302 1303# flags for cproto 1304# This is for cproto 3 patchlevel 8 or below 1305# __inline, __attribute__ and __extension__ are not recognized by cproto 1306# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1307#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1308# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1309# -D__extension__= -D__restrict="" \ 1310# -D__gnuc_va_list=char -D__builtin_va_list=char 1311 1312# 1313# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1314# __inline and __attribute__ are now recognized by cproto 1315# -D"foo()=" is not supported by all compilers so do not use it 1316NO_ATTR= 1317# 1318# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1319# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1320# 1321# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1322PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1323 1324 1325################################################ 1326## no changes required below this line ## 1327################################################ 1328 1329SHELL = /bin/sh 1330 1331.SUFFIXES: 1332.SUFFIXES: .c .o .pro 1333 1334PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1335POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(TCL_CFLAGS) $(EXTRA_DEFS) 1336 1337ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(LEAK_CFLAGS) $(POST_DEFS) 1338 1339# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1340# with "-E". 1341OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1342 1343LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1344 1345LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1346 1347DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1348 1349# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1350# needed by racket. 1351ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1352ALL_LIBS = \ 1353 $(GUI_LIBS1) \ 1354 $(GUI_X_LIBS) \ 1355 $(GUI_LIBS2) \ 1356 $(X_PRE_LIBS) \ 1357 $(X_LIBS) \ 1358 $(X_EXTRA_LIBS) \ 1359 $(MZSCHEME_LIBS) \ 1360 $(LIBS) \ 1361 $(EXTRA_LIBS) \ 1362 $(LUA_LIBS) \ 1363 $(PERL_LIBS) \ 1364 $(PYTHON_LIBS) \ 1365 $(PYTHON3_LIBS) \ 1366 $(TCL_LIBS) \ 1367 $(RUBY_LIBS) \ 1368 $(PROFILE_LIBS) \ 1369 $(LEAK_LIBS) 1370 1371# abbreviations 1372DEST_BIN = $(DESTDIR)$(BINDIR) 1373DEST_VIM = $(DESTDIR)$(VIMLOC) 1374DEST_RT = $(DESTDIR)$(VIMRTLOC) 1375DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1376DEST_COL = $(DESTDIR)$(COLSUBLOC) 1377DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1378DEST_IND = $(DESTDIR)$(INDSUBLOC) 1379DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1380DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1381DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1382DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1383DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1384DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1385DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1386DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1387DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1388DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1389DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1390DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1391DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1392 1393# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1394# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1395# directory first. 1396# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1397DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1398DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1399DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1400DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1401DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1402DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1403DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1404DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1405DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1406DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1407DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1408DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1409 1410# BASIC_SRC: files that are always used 1411# GUI_SRC: extra GUI files for current configuration 1412# ALL_GUI_SRC: all GUI files for Unix 1413# 1414# SRC: files used for current configuration 1415# TAGS_SRC: source files used for make tags 1416# TAGS_INCL: include files used for make tags 1417# ALL_SRC: source files used for make depend and make lint 1418 1419TAGS_INCL = *.h 1420 1421BASIC_SRC = \ 1422 blowfish.c \ 1423 buffer.c \ 1424 charset.c \ 1425 diff.c \ 1426 digraph.c \ 1427 edit.c \ 1428 eval.c \ 1429 ex_cmds.c \ 1430 ex_cmds2.c \ 1431 ex_docmd.c \ 1432 ex_eval.c \ 1433 ex_getln.c \ 1434 fileio.c \ 1435 fold.c \ 1436 getchar.c \ 1437 hardcopy.c \ 1438 hashtab.c \ 1439 if_cscope.c \ 1440 if_xcmdsrv.c \ 1441 main.c \ 1442 mark.c \ 1443 memfile.c \ 1444 memline.c \ 1445 menu.c \ 1446 message.c \ 1447 misc1.c \ 1448 misc2.c \ 1449 move.c \ 1450 mbyte.c \ 1451 normal.c \ 1452 ops.c \ 1453 option.c \ 1454 os_unix.c \ 1455 auto/pathdef.c \ 1456 popupmnu.c \ 1457 quickfix.c \ 1458 regexp.c \ 1459 screen.c \ 1460 search.c \ 1461 sha256.c \ 1462 spell.c \ 1463 syntax.c \ 1464 tag.c \ 1465 term.c \ 1466 ui.c \ 1467 undo.c \ 1468 version.c \ 1469 window.c \ 1470 $(OS_EXTRA_SRC) 1471 1472SRC = $(BASIC_SRC) \ 1473 $(GUI_SRC) \ 1474 $(HANGULIN_SRC) \ 1475 $(LUA_SRC) \ 1476 $(MZSCHEME_SRC) \ 1477 $(PERL_SRC) \ 1478 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1479 $(TCL_SRC) \ 1480 $(RUBY_SRC) \ 1481 $(SNIFF_SRC) \ 1482 $(WORKSHOP_SRC) \ 1483 $(WSDEBUG_SRC) 1484 1485TAGS_SRC = *.c *.cpp if_perl.xs 1486 1487EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1488 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1489 gui_beval.c workshop.c wsdebug.c integration.c netbeans.c 1490 1491# Unittest files 1492MEMFILE_TEST_SRC = memfile_test.c 1493MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1494 1495UNITTEST_SRC = $(MEMFILE_TEST_SRC) 1496UNITTEST_TARGETS = $(MEMFILE_TEST_TARGET) 1497 1498# All sources, also the ones that are not configured 1499ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) $(EXTRA_SRC) 1500 1501# Which files to check with lint. Select one of these three lines. ALL_SRC 1502# checks more, but may not work well for checking a GUI that wasn't configured. 1503# The perl sources also don't work well with lint. 1504LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1505 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1506#LINT_SRC = $(SRC) 1507#LINT_SRC = $(ALL_SRC) 1508#LINT_SRC = $(BASIC_SRC) 1509 1510OBJ_COMMON = \ 1511 objects/buffer.o \ 1512 objects/blowfish.o \ 1513 objects/charset.o \ 1514 objects/diff.o \ 1515 objects/digraph.o \ 1516 objects/edit.o \ 1517 objects/eval.o \ 1518 objects/ex_cmds.o \ 1519 objects/ex_cmds2.o \ 1520 objects/ex_docmd.o \ 1521 objects/ex_eval.o \ 1522 objects/ex_getln.o \ 1523 objects/fileio.o \ 1524 objects/fold.o \ 1525 objects/getchar.o \ 1526 objects/hardcopy.o \ 1527 objects/hashtab.o \ 1528 $(HANGULIN_OBJ) \ 1529 objects/if_cscope.o \ 1530 objects/if_xcmdsrv.o \ 1531 objects/mark.o \ 1532 objects/memline.o \ 1533 objects/menu.o \ 1534 objects/message.o \ 1535 objects/misc1.o \ 1536 objects/misc2.o \ 1537 objects/move.o \ 1538 objects/mbyte.o \ 1539 objects/normal.o \ 1540 objects/ops.o \ 1541 objects/option.o \ 1542 objects/os_unix.o \ 1543 objects/pathdef.o \ 1544 objects/popupmnu.o \ 1545 objects/quickfix.o \ 1546 objects/regexp.o \ 1547 objects/screen.o \ 1548 objects/search.o \ 1549 objects/sha256.o \ 1550 objects/spell.o \ 1551 objects/syntax.o \ 1552 $(SNIFF_OBJ) \ 1553 objects/tag.o \ 1554 objects/term.o \ 1555 objects/ui.o \ 1556 objects/undo.o \ 1557 objects/version.o \ 1558 objects/window.o \ 1559 $(GUI_OBJ) \ 1560 $(LUA_OBJ) \ 1561 $(MZSCHEME_OBJ) \ 1562 $(PERL_OBJ) \ 1563 $(PYTHON_OBJ) \ 1564 $(PYTHON3_OBJ) \ 1565 $(TCL_OBJ) \ 1566 $(RUBY_OBJ) \ 1567 $(OS_EXTRA_OBJ) \ 1568 $(WORKSHOP_OBJ) \ 1569 $(NETBEANS_OBJ) \ 1570 $(WSDEBUG_OBJ) 1571 1572OBJ = $(OBJ_COMMON) \ 1573 objects/main.o \ 1574 objects/memfile.o 1575 1576MEMFILE_TEST_OBJ = $(OBJ_COMMON) \ 1577 objects/memfile_test.o 1578 1579PRO_AUTO = \ 1580 blowfish.pro \ 1581 buffer.pro \ 1582 charset.pro \ 1583 diff.pro \ 1584 digraph.pro \ 1585 edit.pro \ 1586 eval.pro \ 1587 ex_cmds.pro \ 1588 ex_cmds2.pro \ 1589 ex_docmd.pro \ 1590 ex_eval.pro \ 1591 ex_getln.pro \ 1592 fileio.pro \ 1593 fold.pro \ 1594 getchar.pro \ 1595 hardcopy.pro \ 1596 hashtab.pro \ 1597 hangulin.pro \ 1598 if_cscope.pro \ 1599 if_xcmdsrv.pro \ 1600 if_python.pro \ 1601 if_python3.pro \ 1602 if_ruby.pro \ 1603 main.pro \ 1604 mark.pro \ 1605 memfile.pro \ 1606 memline.pro \ 1607 menu.pro \ 1608 message.pro \ 1609 misc1.pro \ 1610 misc2.pro \ 1611 move.pro \ 1612 mbyte.pro \ 1613 normal.pro \ 1614 ops.pro \ 1615 option.pro \ 1616 os_unix.pro \ 1617 popupmnu.pro \ 1618 quickfix.pro \ 1619 regexp.pro \ 1620 screen.pro \ 1621 search.pro \ 1622 sha256.pro \ 1623 spell.pro \ 1624 syntax.pro \ 1625 tag.pro \ 1626 term.pro \ 1627 termlib.pro \ 1628 ui.pro \ 1629 undo.pro \ 1630 version.pro \ 1631 window.pro \ 1632 gui_beval.pro \ 1633 workshop.pro \ 1634 netbeans.pro \ 1635 $(ALL_GUI_PRO) \ 1636 $(TCL_PRO) 1637 1638# Resources used for the Mac are in one directory. 1639RSRC_DIR = os_mac_rsrc 1640 1641PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1642 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1643 1644# Default target is making the executable and tools 1645all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1646 1647tools: $(TOOLS) 1648 1649# Run configure with all the setting from above. 1650# 1651# Note: auto/config.h doesn't depend on configure, because running configure 1652# doesn't always update auto/config.h. The timestamp isn't changed if the 1653# file contents didn't change (to avoid recompiling everything). Including a 1654# dependency on auto/config.h would cause running configure each time when 1655# auto/config.h isn't updated. The dependency on auto/config.mk should make 1656# sure configure is run when it's needed. 1657# 1658config auto/config.mk: auto/configure config.mk.in config.h.in 1659 if test -f auto/config.cache && \ 1660 grep '^ac_cv_env_CFLAGS_value=' auto/config.cache > /dev/null && \ 1661 ! grep -x -F 'ac_cv_env_CFLAGS_value=$(CFLAGS)' auto/config.cache > /dev/null; then \ 1662 rm auto/config.cache; \ 1663 fi 1664 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1665 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1666 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1667 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1668 $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1669 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1670 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1671 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1672 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1673 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1674 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1675 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1676 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1677 $(CONF_OPT_SYSMOUSE) 1678 1679# Use "make reconfig" to rerun configure without cached values. 1680# When config.h changes, most things will be recompiled automatically. 1681# Invoke $(MAKE) to run config with the empty auto/config.mk. 1682# Invoke $(MAKE) to build all with the filled auto/config.mk. 1683reconfig: scratch clean 1684 $(MAKE) -f Makefile config 1685 $(MAKE) -f Makefile all 1686 1687# Run autoconf to produce auto/configure. 1688# Note: 1689# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1690# producing auto/configure. 1691# - autoconf is not run automatically, because a patch usually changes both 1692# configure.in and auto/configure but can't update the timestamps. People 1693# who do not have (the correct version of) autoconf would run into trouble. 1694# 1695# Two tricks are required to make autoconf put its output in the "auto" dir: 1696# - Temporarily move the ./configure script to ./configure.save. Don't 1697# overwrite it, it's probably the result of an aborted autoconf. 1698# - Use sed to change ./config.log to auto/config.log in the configure script. 1699# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1700# care of: 1701# - configure.lineno: has the line numbers replaced with $LINENO. That 1702# improves patches a LOT, thus use it instead (until someone says it doesn't 1703# work on some system). 1704# - autom4te.cache directory is created and not cleaned up. Delete it. 1705# - Uses ">config.log" instead of "./config.log". 1706autoconf: 1707 if test ! -f configure.save; then mv configure configure.save; fi 1708 autoconf 1709 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1710 chmod 755 auto/configure 1711 mv -f configure.save configure 1712 -rm -rf autom4te.cache 1713 -rm -f auto/config.status auto/config.cache 1714 1715# Re-execute this Makefile to include the new auto/config.mk produced by 1716# configure Only used when typing "make" with a fresh auto/config.mk. 1717myself: 1718 $(MAKE) -f Makefile all 1719 1720 1721# The normal command to compile a .c file to its .o file. 1722CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1723 1724 1725# Link the target for normal use or debugging. 1726# A shell script is used to try linking without unnecessary libraries. 1727$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1728 $(CCC) version.c -o objects/version.o 1729 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1730 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1731 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1732 sh $(srcdir)/link.sh 1733 1734xxd/xxd$(EXEEXT): xxd/xxd.c 1735 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1736 $(MAKE) -f Makefile 1737 1738# Build the language specific files if they were unpacked. 1739# Generate the converted .mo files separately, it's no problem if this fails. 1740languages: 1741 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1742 cd $(PODIR); \ 1743 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1744 fi 1745 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1746 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1747 fi 1748 1749# Update the *.po files for changes in the sources. Only run manually. 1750update-po: 1751 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1752 1753# Generate function prototypes. This is not needed to compile vim, but if 1754# you want to use it, cproto is out there on the net somewhere -- Webb 1755# 1756# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1757# few include files that can not be found, that's OK. 1758 1759proto: $(PRO_AUTO) $(PRO_MANUAL) 1760 1761# Filter out arguments that cproto doesn't support. 1762# Don't pass "-pthread" to cproto, it sees it as a list of individual flags. 1763# Don't pass "-fstack-protector" to cproto, for the same reason. 1764# Don't pass "-g" to cproto. 1765# The -E"gcc -E" argument must be separate to avoid problems with shell 1766# quoting. 1767CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1768 `echo '$(LINT_CFLAGS)' | sed -e 's/-pthread//g' -e 's/-fstack-protector//g' -e 's/\ -g\ / /g'` 1769 1770### Would be nice if this would work for "normal" make. 1771### Currently it only works for (Free)BSD make. 1772#$(PRO_AUTO): $$(*F).c 1773# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1774 1775# Always define FEAT_GUI. This may generate a few warnings if it's also 1776# defined in auto/config.h, you can ignore that. 1777.c.pro: 1778 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1779 echo "/* vim: set ft=c : */" >> proto/$@ 1780 1781os_amiga.pro: os_amiga.c 1782 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1783 echo "/* vim: set ft=c : */" >> proto/$@ 1784 1785os_msdos.pro: os_msdos.c 1786 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1787 echo "/* vim: set ft=c : */" >> proto/$@ 1788 1789os_win16.pro: os_win16.c 1790 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1791 echo "/* vim: set ft=c : */" >> proto/$@ 1792 1793os_win32.pro: os_win32.c 1794 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1795 echo "/* vim: set ft=c : */" >> proto/$@ 1796 1797os_mswin.pro: os_mswin.c 1798 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1799 echo "/* vim: set ft=c : */" >> proto/$@ 1800 1801winclip.pro: winclip.c 1802 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1803 echo "/* vim: set ft=c : */" >> proto/$@ 1804 1805os_beos.pro: os_beos.c 1806 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1807 echo "/* vim: set ft=c : */" >> proto/$@ 1808 1809os_vms.pro: os_vms.c 1810# must use os_vms_conf.h for auto/config.h 1811 mv auto/config.h auto/config.h.save 1812 cp os_vms_conf.h auto/config.h 1813 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1814 echo "/* vim: set ft=c : */" >> proto/$@ 1815 rm auto/config.h 1816 mv auto/config.h.save auto/config.h 1817 1818# if_perl.pro is special: Use the generated if_perl.c for input and remove 1819# prototypes for local functions. 1820if_perl.pro: auto/if_perl.c 1821 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1822 1823 1824notags: 1825 -rm -f tags 1826 1827# Note: tags is made for the currently configured version, can't include both 1828# Motif and Athena GUI 1829# You can ignore error messages for missing files. 1830tags TAGS: notags 1831 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1832 1833# Make a highlight file for types. Requires Exuberant ctags and awk 1834types: types.vim 1835types.vim: $(TAGS_SRC) $(TAGS_INCL) 1836 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1837 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1838 {printf("%s ", $$1)}END{print ""}' > $@ 1839 1840# Execute the test scripts. Run these after compiling Vim, before installing. 1841# This doesn't depend on $(VIMTARGET), because that won't work when configure 1842# wasn't run yet. Restart make to build it instead. 1843# 1844# This will produce a lot of garbage on your screen, including a few error 1845# messages. Don't worry about that. 1846# If there is a real error, there will be a difference between "testXX.out" and 1847# a "testXX.ok" file. 1848# If everything is alright, the final message will be "ALL DONE". If not you 1849# get "TEST FAILURE". 1850# 1851test check: 1852 $(MAKE) -f Makefile $(VIMTARGET) 1853 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1854 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1855 fi 1856 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1857 ln -s $(VIMTARGET) vim; \ 1858 fi 1859 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1860 $(MAKE) -f Makefile unittest 1861 1862unittesttargets: 1863 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 1864 1865unittest unittests: $(UNITTEST_TARGETS) 1866 @for t in $(UNITTEST_TARGETS); do \ 1867 ./$$t || exit 1; echo $$t passed; \ 1868 done 1869 1870# Run individual test, assuming that Vim was already compiled. 1871test1 test2 test3 test4 test5 test6 test7 test8 test9 \ 1872 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 \ 1873 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29 \ 1874 test30 test31 test32 test33 test34 test35 test36 test37 test38 test39 \ 1875 test40 test41 test42 test43 test44 test45 test46 test47 test48 test49 \ 1876 test50 test51 test52 test53 test54 test55 test56 test57 test58 test59 \ 1877 test60 test61 test62 test63 test64 test65 test66 test67 test68 test69 \ 1878 test70 test71 test72 test73 test74 test75 test76 test77 test78 test79 \ 1879 test80 test81 test82 test83 test84 test85 test86 test87 test88 test89 \ 1880 test90 test91 test92 test93 test94 test95 test96 test97 test98 test99: 1881 cd testdir; rm $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTARGET) 1882 1883testclean: 1884 cd testdir; $(MAKE) -f Makefile clean 1885 if test -d $(PODIR); then \ 1886 cd $(PODIR); $(MAKE) checkclean; \ 1887 fi 1888 1889# Unittests 1890# It's build just like Vim to satisfy all dependencies. 1891$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 1892 $(CCC) version.c -o objects/version.o 1893 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1894 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 1895 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1896 sh $(srcdir)/link.sh 1897 1898# install targets 1899 1900install: $(GUI_INSTALL) 1901 1902install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1903 1904install_gui_extra: installgtutorbin 1905 1906installvim: installvimbin installtutorbin \ 1907 installruntime installlinks installmanlinks 1908 1909# 1910# Avoid overwriting an existing executable, somebody might be running it and 1911# overwriting it could cause it to crash. Deleting it is OK, it won't be 1912# really deleted until all running processes for it have exited. It is 1913# renamed first, in case the deleting doesn't work. 1914# 1915# If you want to keep an older version, rename it before running "make 1916# install". 1917# 1918installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1919 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1920 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1921 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1922 fi 1923 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1924 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1925 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1926# may create a link to the new executable from /usr/bin/vi 1927 -$(LINKIT) 1928 1929# Long list of arguments for the shell script that installs the manual pages 1930# for one language. 1931INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1932 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1933 1934# Install most of the runtime files 1935installruntime: installrtbase installmacros installtutor installspell 1936 1937# install the help files; first adjust the contents for the final location 1938installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1939 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1940 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1941 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1942 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1943 @echo generating help tags 1944# Generate the help tags with ":helptags" to handle all languages. 1945 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1946 cd $(HELPSOURCE); \ 1947 files=`ls *.txt tags`; \ 1948 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1949 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1950 cd $(DEST_HELP); \ 1951 chmod $(HELPMOD) $$files 1952 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1953 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1954# install the menu files 1955 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1956 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1957 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1958 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1959 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1960 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1961# install the evim file 1962 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1963 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1964 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1965 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1966# install the bugreport file 1967 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1968 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1969# install the example vimrc files 1970 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1971 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1972 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1973 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1974# install the file type detection files 1975 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1976 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1977 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1978 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1979 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1980 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1981 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1982 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1983 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1984 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1985 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1986 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1987 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1988 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1989 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1990 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1991# install the print resource files 1992 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1993 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1994# install the colorscheme files 1995 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1996 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1997# install the syntax files 1998 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1999 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2000# install the indent files 2001 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2002 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2003# install the standard autoload files 2004 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2005 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2006 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2007 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2008# install the standard plugin files 2009 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2010 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2011# install the ftplugin files 2012 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2013 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2014# install the compiler files 2015 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2016 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2017 2018installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2019 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2020 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2021 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2022 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2023# When using CVS some CVS directories might have been copied. 2024# Also delete AAPDIR and *.info files. 2025 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2026 if test -n "$$cvs"; then \ 2027 rm -rf $$cvs; \ 2028 fi 2029 2030# install the tutor files 2031installtutorbin: $(DEST_VIM) 2032 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2033 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2034 2035installgtutorbin: $(DEST_VIM) 2036 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2037 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2038 2039installtutor: $(DEST_RT) $(DEST_TUTOR) 2040 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2041 -rm -f $(DEST_TUTOR)/*.info 2042 chmod $(HELPMOD) $(DEST_TUTOR)/* 2043 2044# Install the spell files, if they exist. This assumes at least the English 2045# spell file is there. 2046installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2047 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2048 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2049 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2050 fi 2051 2052# install helper program xxd 2053installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2054 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2055 $(INSTALL_TOOL_LANGS) 2056 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2057 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2058 rm -f $(DEST_BIN)/xxd.rm; \ 2059 fi 2060 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2061 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2062 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2063 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2064 2065# install the runtime tools 2066 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2067# When using CVS some CVS directories might have been copied. 2068 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2069 if test -n "$$cvs"; then \ 2070 rm -rf $$cvs; \ 2071 fi 2072 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2073# replace the path in some tools 2074 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2075 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2076 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2077 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2078 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2079 2080# install the language specific files for tools, if they were unpacked 2081install-tool-languages: 2082 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2083 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2084 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2085 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2086 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2087 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2088 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2089 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2090 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2091 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2092 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2093 2094# install the language specific files, if they were unpacked 2095install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2096 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2097 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2098 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2099 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2100 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2101 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2102 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2103 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2104 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2105 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2106 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2107 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2108 $(DEST_MAN_FR) $(INSTALLMLARGS) 2109 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2110 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2111 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2112 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2113 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2114 $(DEST_MAN_IT) $(INSTALLMLARGS) 2115 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2116 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2117 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2118 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2119 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2120 $(DEST_MAN_PL) $(INSTALLMLARGS) 2121 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2122 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2123 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2124 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2125 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2126 $(DEST_MAN_RU) $(INSTALLMLARGS) 2127 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2128 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2129 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2130 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2131 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2132 fi 2133 if test -d $(LANGSOURCE); then \ 2134 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2135 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2136 fi 2137 if test -d $(KMAPSOURCE); then \ 2138 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2139 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2140 fi 2141 2142# install the icons for KDE, if the directory exists and the icon doesn't. 2143ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2144ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2145ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2146KDEPATH = $(HOME)/.kde/share/icons 2147install-icons: 2148 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2149 -a ! -f $(ICON48PATH)/gvim.png; then \ 2150 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2151 fi 2152 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2153 -a ! -f $(ICON32PATH)/gvim.png; then \ 2154 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2155 fi 2156 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2157 -a ! -f $(ICON16PATH)/gvim.png; then \ 2158 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2159 fi 2160 2161 2162$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2163 @echo Runtime files not found. 2164 @echo You need to unpack the runtime archive before running "make install". 2165 test -f error 2166 2167$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2168 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2169 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2170 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2171 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2172 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2173 -$(SHELL) ./mkinstalldirs $@ 2174 -chmod $(DIRMOD) $@ 2175 2176# create links from various names to vim. This is only done when the links 2177# (or executables with the same name) don't exist yet. 2178installlinks: $(GUI_TARGETS) \ 2179 $(DEST_BIN)/$(EXTARGET) \ 2180 $(DEST_BIN)/$(VIEWTARGET) \ 2181 $(DEST_BIN)/$(RVIMTARGET) \ 2182 $(DEST_BIN)/$(RVIEWTARGET) \ 2183 $(INSTALLVIMDIFF) 2184 2185installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2186 $(DEST_BIN)/$(GVIEWTARGET) \ 2187 $(DEST_BIN)/$(RGVIMTARGET) \ 2188 $(DEST_BIN)/$(RGVIEWTARGET) \ 2189 $(DEST_BIN)/$(EVIMTARGET) \ 2190 $(DEST_BIN)/$(EVIEWTARGET) \ 2191 $(INSTALLGVIMDIFF) 2192 2193installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2194installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2195 2196$(DEST_BIN)/$(EXTARGET): 2197 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2198 2199$(DEST_BIN)/$(VIEWTARGET): 2200 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2201 2202$(DEST_BIN)/$(GVIMTARGET): 2203 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2204 2205$(DEST_BIN)/$(GVIEWTARGET): 2206 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2207 2208$(DEST_BIN)/$(RVIMTARGET): 2209 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2210 2211$(DEST_BIN)/$(RVIEWTARGET): 2212 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2213 2214$(DEST_BIN)/$(RGVIMTARGET): 2215 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2216 2217$(DEST_BIN)/$(RGVIEWTARGET): 2218 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2219 2220$(DEST_BIN)/$(VIMDIFFTARGET): 2221 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2222 2223$(DEST_BIN)/$(GVIMDIFFTARGET): 2224 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2225 2226$(DEST_BIN)/$(EVIMTARGET): 2227 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2228 2229$(DEST_BIN)/$(EVIEWTARGET): 2230 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2231 2232# Create links for the manual pages with various names to vim. This is only 2233# done when the links (or manpages with the same name) don't exist yet. 2234 2235INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2236 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2237 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2238 $(GVIMDIFFNAME) $(EVIEWNAME) 2239 2240installmanlinks: 2241 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2242 $(DEST_MAN) $(INSTALLMLARGS) 2243 2244uninstall: uninstall_runtime 2245 -rm -f $(DEST_BIN)/$(VIMTARGET) 2246 -rm -f $(DEST_BIN)/vimtutor 2247 -rm -f $(DEST_BIN)/gvimtutor 2248 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2249 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2250 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2251 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2252 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2253 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2254 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2255 2256# Note: the "rmdir" will fail if any files were added after "make install" 2257uninstall_runtime: 2258 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2259 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2260 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2261 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2262 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2263 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2264 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2265 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2266 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2267 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2268 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2269 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2270 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2271 $(DEST_MAN) $(INSTALLMLARGS) 2272 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2273 $(DEST_MAN_FR) $(INSTALLMLARGS) 2274 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2275 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2276 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2277 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2278 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2279 $(DEST_MAN_IT) $(INSTALLMLARGS) 2280 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2281 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2282 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2283 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2284 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2285 $(DEST_MAN_PL) $(INSTALLMLARGS) 2286 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2287 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2288 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2289 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2290 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2291 $(DEST_MAN_RU) $(INSTALLMLARGS) 2292 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2293 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2294 -rm -f $(DEST_MAN)/xxd.1 2295 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2296 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2297 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2298 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2299 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2300 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2301 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2302 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2303 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2304 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2305 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2306 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2307 -rm -f $(SYS_OPTWIN_FILE) 2308 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2309 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2310 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2311 -rm -rf $(DEST_MACRO) 2312 -rm -rf $(DEST_TUTOR) 2313 -rm -rf $(DEST_SPELL) 2314 -rm -rf $(DEST_TOOLS) 2315 -rm -rf $(DEST_LANG) 2316 -rm -rf $(DEST_KMAP) 2317 -rm -rf $(DEST_COMP) 2318 -rm -f $(DEST_PRINT)/*.ps 2319 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2320 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2321 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2322 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2323 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2324# This will fail when other Vim versions are installed, no worries. 2325 -rmdir $(DEST_VIM) 2326 2327# Clean up all the files that have been produced, except configure's. 2328# We support common typing mistakes for Juergen! :-) 2329clean celan: testclean 2330 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2331 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2332 -rm -f conftest* *~ auto/link.sed 2333 -rm -f $(UNITTEST_TARGETS) 2334 -rm -f runtime pixmaps 2335 -rm -rf $(APPDIR) 2336 -rm -rf mzscheme_base.c 2337 if test -d $(PODIR); then \ 2338 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2339 fi 2340 2341# Make a shadow directory for compilation on another system or with different 2342# features. 2343SHADOWDIR = shadow 2344 2345shadow: runtime pixmaps 2346 mkdir $(SHADOWDIR) 2347 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs . 2348 mkdir $(SHADOWDIR)/auto 2349 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2350 cd $(SHADOWDIR); rm -f auto/link.sed 2351 cp Makefile configure $(SHADOWDIR) 2352 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2353 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2354 cp config.mk.dist $(SHADOWDIR) 2355 mkdir $(SHADOWDIR)/xxd 2356 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2357 if test -d $(RSRC_DIR); then \ 2358 cd $(SHADOWDIR); \ 2359 ln -s ../infplist.xml .; \ 2360 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2361 fi 2362 mkdir $(SHADOWDIR)/testdir 2363 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2364 ../../testdir/vimrc.unix \ 2365 ../../testdir/*.in \ 2366 ../../testdir/*.vim \ 2367 ../../testdir/test83-tags? \ 2368 ../../testdir/*.ok . 2369 2370# Link needed for doing "make install" in a shadow directory. 2371runtime: 2372 -ln -s ../runtime . 2373 2374# Link needed for doing "make" using GTK in a shadow directory. 2375pixmaps: 2376 -ln -s ../pixmaps . 2377 2378# Update the synmenu.vim file with the latest Syntax menu. 2379# This is only needed when runtime/makemenu.vim was changed. 2380menu: ./vim ../runtime/makemenu.vim 2381 ./vim -u ../runtime/makemenu.vim 2382 2383# Start configure from scratch 2384scrub scratch: 2385 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2386 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2387 touch auto/config.h 2388 cp config.mk.dist auto/config.mk 2389 2390distclean: clean scratch 2391 -rm -f tags 2392 2393dist: distclean 2394 @echo 2395 @echo Making the distribution has to be done in the top directory 2396 2397mdepend: 2398 -@rm -f Makefile~ 2399 cp Makefile Makefile~ 2400 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2401 @for i in $(ALL_SRC) ; do \ 2402 echo "$$i" ; \ 2403 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2404 $(CPP) $$i |\ 2405 grep '^# .*"\./.*\.h"' |\ 2406 sort -t'"' -u +1 -2 |\ 2407 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2408 ` >> tmp_make ; \ 2409 done 2410 mv tmp_make Makefile 2411 2412depend: 2413 -@rm -f Makefile~ 2414 cp Makefile Makefile~ 2415 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2416 -for i in $(ALL_SRC); do echo $$i; \ 2417 $(CPP_DEPEND) $$i | \ 2418 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2419 mv tmp_make Makefile 2420 2421# Run lint. Clean up the *.ln files that are sometimes left behind. 2422lint: 2423 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2424 -rm -f *.ln 2425 2426# Check dosinst.c with lint. 2427lintinstall: 2428 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2429 -rm -f dosinst.ln 2430 2431########################################################################### 2432 2433.c.o: 2434 $(CCC) $< 2435 2436auto/if_perl.c: if_perl.xs 2437 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2438 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2439 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2440 2441auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2442 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2443 2444auto/pathdef.c: Makefile auto/config.mk 2445 -@echo creating $@ 2446 -@echo '/* pathdef.c */' > $@ 2447 -@echo '/* This file is automatically created by Makefile' >> $@ 2448 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2449 -@echo '#include "vim.h"' >> $@ 2450 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2451 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2452 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2453 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2454 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2455 -@if test -n "$(COMPILEDBY)"; then \ 2456 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2457 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2458 -@echo '";' >> $@ 2459 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2460 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2461 -@echo '";' >> $@ 2462 -@sh $(srcdir)/pathdef.sh 2463 2464# All the object files are put in the "objects" directory. Since not all make 2465# commands understand putting object files in another directory, it must be 2466# specified for each file separately. 2467 2468objects: 2469 mkdir objects 2470 2471objects/blowfish.o: blowfish.c 2472 $(CCC) -o $@ blowfish.c 2473 2474objects/buffer.o: buffer.c 2475 $(CCC) -o $@ buffer.c 2476 2477objects/charset.o: charset.c 2478 $(CCC) -o $@ charset.c 2479 2480objects/diff.o: diff.c 2481 $(CCC) -o $@ diff.c 2482 2483objects/digraph.o: digraph.c 2484 $(CCC) -o $@ digraph.c 2485 2486objects/edit.o: edit.c 2487 $(CCC) -o $@ edit.c 2488 2489objects/eval.o: eval.c 2490 $(CCC) -o $@ eval.c 2491 2492objects/ex_cmds.o: ex_cmds.c 2493 $(CCC) -o $@ ex_cmds.c 2494 2495objects/ex_cmds2.o: ex_cmds2.c 2496 $(CCC) -o $@ ex_cmds2.c 2497 2498objects/ex_docmd.o: ex_docmd.c 2499 $(CCC) -o $@ ex_docmd.c 2500 2501objects/ex_eval.o: ex_eval.c 2502 $(CCC) -o $@ ex_eval.c 2503 2504objects/ex_getln.o: ex_getln.c 2505 $(CCC) -o $@ ex_getln.c 2506 2507objects/fileio.o: fileio.c 2508 $(CCC) -o $@ fileio.c 2509 2510objects/fold.o: fold.c 2511 $(CCC) -o $@ fold.c 2512 2513objects/getchar.o: getchar.c 2514 $(CCC) -o $@ getchar.c 2515 2516objects/hardcopy.o: hardcopy.c 2517 $(CCC) -o $@ hardcopy.c 2518 2519objects/hashtab.o: hashtab.c 2520 $(CCC) -o $@ hashtab.c 2521 2522objects/gui.o: gui.c 2523 $(CCC) -o $@ gui.c 2524 2525objects/gui_at_fs.o: gui_at_fs.c 2526 $(CCC) -o $@ gui_at_fs.c 2527 2528objects/gui_at_sb.o: gui_at_sb.c 2529 $(CCC) -o $@ gui_at_sb.c 2530 2531objects/gui_athena.o: gui_athena.c 2532 $(CCC) -o $@ gui_athena.c 2533 2534objects/gui_beval.o: gui_beval.c 2535 $(CCC) -o $@ gui_beval.c 2536 2537objects/gui_gtk.o: gui_gtk.c 2538 $(CCC) -o $@ gui_gtk.c 2539 2540objects/gui_gtk_f.o: gui_gtk_f.c 2541 $(CCC) -o $@ gui_gtk_f.c 2542 2543objects/gui_gtk_x11.o: gui_gtk_x11.c 2544 $(CCC) -o $@ gui_gtk_x11.c 2545 2546objects/gui_motif.o: gui_motif.c 2547 $(CCC) -o $@ gui_motif.c 2548 2549objects/gui_xmdlg.o: gui_xmdlg.c 2550 $(CCC) -o $@ gui_xmdlg.c 2551 2552objects/gui_xmebw.o: gui_xmebw.c 2553 $(CCC) -o $@ gui_xmebw.c 2554 2555objects/gui_x11.o: gui_x11.c 2556 $(CCC) -o $@ gui_x11.c 2557 2558objects/gui_photon.o: gui_photon.c 2559 $(CCC) -o $@ gui_photon.c 2560 2561objects/gui_mac.o: gui_mac.c 2562 $(CCC) -o $@ gui_mac.c 2563 2564objects/hangulin.o: hangulin.c 2565 $(CCC) -o $@ hangulin.c 2566 2567objects/if_cscope.o: if_cscope.c 2568 $(CCC) -o $@ if_cscope.c 2569 2570objects/if_xcmdsrv.o: if_xcmdsrv.c 2571 $(CCC) -o $@ if_xcmdsrv.c 2572 2573objects/if_lua.o: if_lua.c 2574 $(CCC) $(LUA_CFLAGS) -o $@ if_lua.c 2575 2576objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2577 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2578 2579mzscheme_base.c: 2580 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2581 2582objects/if_perl.o: auto/if_perl.c 2583 $(CCC) $(PERL_CFLAGS) -o $@ auto/if_perl.c 2584 2585objects/if_perlsfio.o: if_perlsfio.c 2586 $(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c 2587 2588objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2589 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2590 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2591 $(PYTHON_GETPATH_CFLAGS) 2592 2593objects/if_python.o: if_python.c if_py_both.h 2594 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2595 2596objects/if_python3.o: if_python3.c if_py_both.h 2597 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2598 2599objects/if_ruby.o: if_ruby.c 2600 $(CCC) $(RUBY_CFLAGS) -o $@ if_ruby.c 2601 2602objects/if_sniff.o: if_sniff.c 2603 $(CCC) -o $@ if_sniff.c 2604 2605objects/if_tcl.o: if_tcl.c 2606 $(CCC) -o $@ if_tcl.c 2607 2608objects/integration.o: integration.c 2609 $(CCC) -o $@ integration.c 2610 2611objects/main.o: main.c 2612 $(CCC) -o $@ main.c 2613 2614objects/mark.o: mark.c 2615 $(CCC) -o $@ mark.c 2616 2617objects/memfile.o: memfile.c 2618 $(CCC) -o $@ memfile.c 2619 2620objects/memfile_test.o: memfile_test.c 2621 $(CCC) -o $@ memfile_test.c 2622 2623objects/memline.o: memline.c 2624 $(CCC) -o $@ memline.c 2625 2626objects/menu.o: menu.c 2627 $(CCC) -o $@ menu.c 2628 2629objects/message.o: message.c 2630 $(CCC) -o $@ message.c 2631 2632objects/misc1.o: misc1.c 2633 $(CCC) -o $@ misc1.c 2634 2635objects/misc2.o: misc2.c 2636 $(CCC) -o $@ misc2.c 2637 2638objects/move.o: move.c 2639 $(CCC) -o $@ move.c 2640 2641objects/mbyte.o: mbyte.c 2642 $(CCC) -o $@ mbyte.c 2643 2644objects/normal.o: normal.c 2645 $(CCC) -o $@ normal.c 2646 2647objects/ops.o: ops.c 2648 $(CCC) -o $@ ops.c 2649 2650objects/option.o: option.c 2651 $(CCC) -o $@ option.c 2652 2653objects/os_beos.o: os_beos.c 2654 $(CCC) -o $@ os_beos.c 2655 2656objects/os_qnx.o: os_qnx.c 2657 $(CCC) -o $@ os_qnx.c 2658 2659objects/os_macosx.o: os_macosx.m 2660 $(CCC) -o $@ os_macosx.m 2661 2662objects/os_mac_conv.o: os_mac_conv.c 2663 $(CCC) -o $@ os_mac_conv.c 2664 2665objects/os_unix.o: os_unix.c 2666 $(CCC) -o $@ os_unix.c 2667 2668objects/os_mswin.o: os_mswin.c 2669 $(CCC) -o $@ os_mswin.c 2670 2671objects/winclip.o: winclip.c 2672 $(CCC) -o $@ winclip.c 2673 2674objects/pathdef.o: auto/pathdef.c 2675 $(CCC) -o $@ auto/pathdef.c 2676 2677objects/pty.o: pty.c 2678 $(CCC) -o $@ pty.c 2679 2680objects/popupmnu.o: popupmnu.c 2681 $(CCC) -o $@ popupmnu.c 2682 2683objects/quickfix.o: quickfix.c 2684 $(CCC) -o $@ quickfix.c 2685 2686objects/regexp.o: regexp.c regexp_nfa.c 2687 $(CCC) -o $@ regexp.c 2688 2689objects/screen.o: screen.c 2690 $(CCC) -o $@ screen.c 2691 2692objects/search.o: search.c 2693 $(CCC) -o $@ search.c 2694 2695objects/sha256.o: sha256.c 2696 $(CCC) -o $@ sha256.c 2697 2698objects/spell.o: spell.c 2699 $(CCC) -o $@ spell.c 2700 2701objects/syntax.o: syntax.c 2702 $(CCC) -o $@ syntax.c 2703 2704objects/tag.o: tag.c 2705 $(CCC) -o $@ tag.c 2706 2707objects/term.o: term.c 2708 $(CCC) -o $@ term.c 2709 2710objects/ui.o: ui.c 2711 $(CCC) -o $@ ui.c 2712 2713objects/undo.o: undo.c 2714 $(CCC) -o $@ undo.c 2715 2716objects/window.o: window.c 2717 $(CCC) -o $@ window.c 2718 2719objects/workshop.o: workshop.c 2720 $(CCC) -o $@ workshop.c 2721 2722objects/wsdebug.o: wsdebug.c 2723 $(CCC) -o $@ wsdebug.c 2724 2725objects/netbeans.o: netbeans.c 2726 $(CCC) -o $@ netbeans.c 2727 2728Makefile: 2729 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2730 2731############################################################################### 2732### MacOS X installation 2733### 2734### This installs a runnable Vim.app in $(prefix) 2735 2736REZ = /Developer/Tools/Rez 2737RESDIR = $(APPDIR)/Contents/Resources 2738VERSION = $(VIMMAJOR).$(VIMMINOR) 2739 2740### Common flags 2741M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2742 -DAPP_VER=$(VERSION) 2743 2744install_macosx: gui_bundle 2745# Remove the link to the runtime dir, don't want to copy all of that. 2746 -rm $(RESDIR)/vim/runtime 2747 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2748# Generate the help tags file now, it won't work with "make installruntime". 2749 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2750# Install the runtime files. Recursive! 2751 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2752# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2753 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2754 VIMEXE=$$srcdir/$(VIMTARGET) \ 2755 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2756 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2757 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2758 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2759 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2760# Put the link back. 2761 ln -s `pwd`/../runtime $(RESDIR)/vim 2762# Copy rgb.txt, Mac doesn't always have X11 2763 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2764# TODO: Create the vimtutor and/or gvimtutor application. 2765 2766gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2767 bundle-language 2768 2769$(RESDIR): 2770 mkdir -p $@ 2771 2772bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2773# Make a link to the runtime directory, so that we can try out the executable 2774# without installing it. 2775 mkdir -p $(RESDIR)/vim 2776 -ln -s `pwd`/../runtime $(RESDIR)/vim 2777 2778bundle-executable: $(VIMTARGET) 2779 mkdir -p $(APPDIR)/Contents/MacOS 2780 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2781 2782bundle-info: bundle-dir 2783 @echo "Creating PkgInfo" 2784 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2785 @echo "Creating Info.plist" 2786 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2787 2788bundle-resource: bundle-dir bundle-rsrc 2789 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2790 2791### Classic resources 2792# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2793# This file is also required for OS X Vim. 2794bundle-rsrc: os_mac.rsr.hqx 2795 @echo "Creating resource fork" 2796 python dehqx.py $< 2797 rm -f gui_mac.rsrc 2798 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2799 2800# po/Make_osx.pl says something about generating a Mac message file 2801# for Ukrainian. Would somebody using Mac OS X in Ukrainian 2802# *really* be upset that Carbon Vim was not localised in 2803# Ukrainian? 2804# 2805#bundle-language: bundle-dir po/Make_osx.pl 2806# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2807bundle-language: bundle-dir 2808 2809$(APPDIR)/Contents: 2810 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2811 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2812 2813 2814############################################################################### 2815### (automatically generated by 'make depend') 2816### Dependencies: 2817objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 2818 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2819 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2820 globals.h farsi.h arabic.h 2821objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2822 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2823 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2824 arabic.h version.h 2825objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2826 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2827 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2828 arabic.h 2829objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2830 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2831 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2832 arabic.h 2833objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2834 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2835 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2836 arabic.h 2837objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2838 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2839 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2840 arabic.h 2841objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2842 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2843 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2844 arabic.h version.h 2845objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2846 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2847 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2848 arabic.h version.h 2849objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2850 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2851 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2852 globals.h farsi.h arabic.h version.h 2853objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2854 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2855 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2856 globals.h farsi.h arabic.h 2857objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2858 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2859 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2860 arabic.h 2861objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2862 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2863 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2864 globals.h farsi.h arabic.h 2865objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2866 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2867 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2868 arabic.h 2869objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2870 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2871 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2872 arabic.h 2873objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2874 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2875 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2876 arabic.h 2877objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2878 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2879 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2880 globals.h farsi.h arabic.h version.h 2881objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2882 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2883 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2884 arabic.h 2885objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2886 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2887 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2888 globals.h farsi.h arabic.h if_cscope.h 2889objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2890 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2891 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2892 globals.h farsi.h arabic.h version.h 2893objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2894 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2895 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2896 arabic.h farsi.c arabic.c 2897objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2898 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2899 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2900 arabic.h 2901objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2902 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2903 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2904 arabic.h 2905objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2906 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2907 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2908 arabic.h 2909objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2910 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2911 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2912 arabic.h 2913objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2914 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2915 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2916 arabic.h 2917objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2918 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2919 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2920 arabic.h version.h 2921objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2922 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2923 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2924 arabic.h 2925objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2926 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2927 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2928 arabic.h 2929objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2930 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2931 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2932 arabic.h 2933objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2934 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2935 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2936 arabic.h 2937objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2938 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2939 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2940objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2941 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2942 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2943 arabic.h 2944objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2945 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2946 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2947 arabic.h if_mzsch.h os_unixx.h 2948objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2949 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2950 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2951 globals.h farsi.h arabic.h 2952objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 2953 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2954 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2955 globals.h farsi.h arabic.h 2956objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2957 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2958 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2959 globals.h farsi.h arabic.h 2960objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2961 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2962 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2963 arabic.h regexp_nfa.c 2964objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2965 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2966 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2967 arabic.h 2968objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2969 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2970 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2971 arabic.h 2972objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2973 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2974 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2975 arabic.h 2976objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2977 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2978 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2979 arabic.h 2980objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2981 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2982 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2983 arabic.h 2984objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2985 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2986 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2987objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2988 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2989 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2990 arabic.h 2991objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2992 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2993 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2994objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2995 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2996 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2997 arabic.h 2998objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2999 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3000 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3001 arabic.h version.h 3002objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3003 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3004 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3005 arabic.h 3006objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3007 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3008 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3009objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 3010 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3011 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3012 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 3013objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 3014 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3015 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3016 globals.h farsi.h arabic.h gui_gtk_f.h 3017objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 3018 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3019 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3020 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3021 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3022 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3023 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3024 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3025 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3026 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3027 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3028 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3029 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3030 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3031 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3032 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3033 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3034 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3035 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3036 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3037 ../pixmaps/tb_minwidth.xpm 3038objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 3039 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3040 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3041 globals.h farsi.h arabic.h 3042objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 3043 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3044 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3045 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3046objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 3047 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3048 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3049 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3050 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3051 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3052 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3053 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3054 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3055 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3056 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3057 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3058 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3059 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3060 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3061 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3062 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3063 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3064 ../pixmaps/tb_minwidth.xpm 3065objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 3066 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3067 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3068 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 3069 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3070objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3071 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3072 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3073 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3074 ../runtime/vim48x48.xpm 3075objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3076 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3077 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3078 globals.h farsi.h arabic.h gui_at_sb.h 3079objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3080 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3081 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3082 globals.h farsi.h arabic.h gui_at_sb.h 3083objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3084 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3085 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3086objects/memfile_test.o: memfile_test.c main.c vim.h auto/config.h feature.h \ 3087 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3088 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3089 proto.h globals.h farsi.h arabic.h farsi.c arabic.c memfile.c 3090objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3091 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3092 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3093 globals.h farsi.h arabic.h 3094objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3095 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3096 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3097 arabic.h 3098objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3099 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3100 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3101 globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3102objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3103 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3104 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3105 globals.h farsi.h arabic.h 3106objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3107 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3108 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3109 globals.h farsi.h arabic.h 3110objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3111 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3112 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3113 globals.h farsi.h arabic.h if_py_both.h 3114objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3115 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3116 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3117 globals.h farsi.h arabic.h if_py_both.h 3118objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3119 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3120 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3121 arabic.h 3122objects/if_ruby.o: if_ruby.c auto/config.h vim.h feature.h os_unix.h auto/osdef.h \ 3123 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3124 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3125 arabic.h version.h 3126objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3127 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3128 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3129 globals.h farsi.h arabic.h os_unixx.h 3130objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3131 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3132 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3133 globals.h farsi.h arabic.h 3134objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3135 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3136 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3137 proto.h globals.h farsi.h arabic.h version.h workshop.h 3138objects/wsdebug.o: wsdebug.c 3139objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3140 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3141 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3142 globals.h farsi.h arabic.h integration.h 3143objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3144 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3145 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3146 globals.h farsi.h arabic.h version.h 3147
