1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 235# Sun curses library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284######################## auto/config.mk ######################## {{{1 285# At this position auto/config.mk is included. When starting from the 286# toplevel Makefile it is almost empty. After running auto/configure it 287# contains settings that have been discovered for your system. Settings below 288# this include override settings in auto/config.mk! 289 290# Note: If make fails because auto/config.mk does not exist (it is not 291# included in the repository), do: 292# cp config.mk.dist auto/config.mk 293 294# (X) How to include auto/config.mk depends on the version of "make" you have, 295# if the current choice doesn't work, try the other one. 296 297include auto/config.mk 298#.include "auto/config.mk" 299CClink = $(CC) 300 301#}}} 302 303# Include the configuration choices first, so we can override everything 304# below. As shipped, this file contains a target that causes to run 305# configure. Once configure was run, this file contains a list of 306# make variables with predefined values instead. Thus any second invocation 307# of make, will build Vim. 308 309# CONFIGURE - configure arguments {{{1 310# You can give a lot of options to configure. 311# Change this to your desire and do 'make config' afterwards 312 313# examples (can only use one!): 314#CONF_ARGS = --exec-prefix=/usr 315#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 316#CONF_ARGS = --with-global-runtime=/etc/vim 317#CONF_ARGS = --with-local-dir=/usr/share 318#CONF_ARGS = --without-local-dir 319 320# Use this one if you distribute a modified version of Vim. 321#CONF_ARGS = --with-modified-by="John Doe" 322 323# GUI - For creating Vim with GUI (gvim) (B) 324# Uncomment this line when you don't want to get the GUI version, although you 325# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 326# at all. 327#CONF_OPT_GUI = --disable-gui 328 329# Uncomment one of these lines if you have that GUI but don't want to use it. 330# The automatic check will use another one that can be found. 331# Gnome is disabled by default, it may cause trouble. 332#CONF_OPT_GUI = --disable-gtk2-check 333#CONF_OPT_GUI = --enable-gnome2-check 334#CONF_OPT_GUI = --disable-motif-check 335#CONF_OPT_GUI = --disable-athena-check 336#CONF_OPT_GUI = --disable-nextaw-check 337 338# Uncomment one of these lines to select a specific GUI to use. 339# When using "yes" or nothing, configure will use the first one found: GTK+, 340# Motif or Athena. 341# 342# GTK versions that are known not to work 100% are rejected. 343# Use "--disable-gtktest" to accept them anyway. 344# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 345# 346# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 347# is used then GNOME will automatically be used if it is found. If you have 348# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 349# --enable-gui=gtk or leave out --enable-gnome-check. 350# 351# If the selected GUI isn't found, the GUI is disabled automatically 352#CONF_OPT_GUI = --enable-gui=gtk2 353#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 354#CONF_OPT_GUI = --enable-gui=gnome2 355#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 356#CONF_OPT_GUI = --enable-gui=motif 357#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 358#CONF_OPT_GUI = --enable-gui=athena 359#CONF_OPT_GUI = --enable-gui=nextaw 360 361# Carbon GUI for Mac OS X 362#CONF_OPT_GUI = --enable-gui=carbon 363 364# DARWIN - detecting Mac OS X 365# Uncomment this line when you want to compile a Unix version of Vim on 366# Darwin. None of the Mac specific options or files will be used. 367#CONF_OPT_DARWIN = --disable-darwin 368 369# Select the architecture supported. Default is to build for the current 370# platform. Use "both" for a universal binary. That probably doesn't work 371# when including Perl, Python, etc. 372#CONF_OPT_DARWIN = --with-mac-arch=i386 373#CONF_OPT_DARWIN = --with-mac-arch=ppc 374#CONF_OPT_DARWIN = --with-mac-arch=both 375 376# Uncomment the next line to fail if one of the requested language interfaces 377# cannot be configured. Without this Vim will be build anyway, without 378# the failing interfaces. 379#CONF_OPT_FAIL = --enable-fail-if-missing 380 381# LUA 382# Uncomment one of these when you want to include the Lua interface. 383# First one is for static linking, second one for dynamic loading. 384# Use --with-luajit if you want to use LuaJIT instead of Lua. 385# Set PATH environment variable to find lua or luajit executable. 386#CONF_OPT_LUA = --enable-luainterp 387#CONF_OPT_LUA = --enable-luainterp=dynamic 388#CONF_OPT_LUA = --enable-luainterp --with-luajit 389#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 390# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 391#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 392 393# MZSCHEME 394# Uncomment this when you want to include the MzScheme interface. 395#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 396# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 397#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 398#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 399#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 400 401# PERL 402# Uncomment one of these when you want to include the Perl interface. 403# First one is for static linking, second one for dynamic loading. 404# The Perl option sometimes causes problems, because it adds extra flags 405# 406# to the command line. If you see strange flags during compilation, check in 407# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 408# the next line. 409# When you get an error for a missing "perl.exp" file, try creating an empty 410# one: "touch perl.exp". 411# This requires at least "small" features, "tiny" doesn't work. 412#CONF_OPT_PERL = --enable-perlinterp 413#CONF_OPT_PERL = --enable-perlinterp=dynamic 414 415# PYTHON 416# Uncomment this when you want to include the Python interface. 417# Requires small features or better, fails with tiny features. 418# NOTE: This may cause threading to be enabled, which has side effects (such 419# as using different libraries and debugging becomes more difficult). 420# NOTE: Using this together with Perl may cause a crash in initialization. 421# For Python3 support make a symbolic link in /usr/local/bin: 422# ln -s python3 python3.1 423# If both python2.x and python3.x are enabled then the linking will be via 424# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 425# However, this may still cause problems, such as "import termios" failing. 426# Build two separate versions of Vim in that case. 427#CONF_OPT_PYTHON = --enable-pythoninterp 428#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 429#CONF_OPT_PYTHON3 = --enable-python3interp 430#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 431 432# RUBY 433# Uncomment this when you want to include the Ruby interface. 434# First one for static linking, second one for loading when used. 435# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 436#CONF_OPT_RUBY = --enable-rubyinterp 437#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 438#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 439 440# TCL 441# Uncomment this when you want to include the Tcl interface. 442#CONF_OPT_TCL = --enable-tclinterp 443#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 444 445# CSCOPE 446# Uncomment this when you want to include the Cscope interface. 447#CONF_OPT_CSCOPE = --enable-cscope 448 449# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 450#CONF_OPT_WORKSHOP = --enable-workshop 451 452# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 453# Motif version must have XPM libraries (see |workshop-xpm|). 454# Uncomment this when you do not want the netbeans interface. 455#CONF_OPT_NETBEANS = --disable-netbeans 456 457# SNIFF - Include support for SNiFF+. 458#CONF_OPT_SNIFF = --enable-sniff 459 460# MULTIBYTE - To edit multi-byte characters. 461# Uncomment this when you want to edit a multibyte language. 462# It's automatically enabled with normal features, GTK or IME support. 463# Note: Compile on a machine where setlocale() actually works, otherwise the 464# configure tests may fail. 465#CONF_OPT_MULTIBYTE = --enable-multibyte 466 467# NLS - National Language Support 468# Uncomment this when you do not want to support translated messages, even 469# though configure can find support for it. 470#CONF_OPT_NLS = --disable-nls 471 472# XIM - X Input Method. Special character input support for X11 (Chinese, 473# Japanese, special symbols, etc). Also needed for dead-key support. 474# When omitted it's automatically enabled for the X-windows GUI. 475# HANGUL - Input Hangul (Korean) language using internal routines. 476# Uncomment one of these when you want to input a multibyte language. 477#CONF_OPT_INPUT = --enable-xim 478#CONF_OPT_INPUT = --disable-xim 479#CONF_OPT_INPUT = --enable-hangulinput 480 481# FONTSET - X fontset support for output of languages with many characters. 482# Uncomment this when you want to output a multibyte language. 483#CONF_OPT_OUTPUT = --enable-fontset 484 485# ACL - Uncomment this when you do not want to include ACL support, even 486# though your system does support it. E.g., when it's buggy. 487#CONF_OPT_ACL = --disable-acl 488 489# gpm - For mouse support on Linux console via gpm 490# Uncomment this when you do not want to include gpm support, even 491# though you have gpm libraries and includes. 492#CONF_OPT_GPM = --disable-gpm 493 494# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 495# Uncomment this when you do not want do include sysmouse support, even 496# though you have /dev/sysmouse and includes. 497#CONF_OPT_SYSMOUSE = --disable-sysmouse 498 499# FEATURES - For creating Vim with more or less features 500# Uncomment one of these lines when you want to include few to many features. 501# The default is "normal". 502#CONF_OPT_FEAT = --with-features=tiny 503#CONF_OPT_FEAT = --with-features=small 504#CONF_OPT_FEAT = --with-features=normal 505#CONF_OPT_FEAT = --with-features=big 506#CONF_OPT_FEAT = --with-features=huge 507 508# COMPILED BY - For including a specific e-mail address for ":version". 509#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 510 511# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 512# (otherwise Vim configure will try to include xterm titlebar access) 513# Also disable the GUI above, otherwise it will be included anyway. 514# When both GUI and X11 have been disabled this may save about 15% of the 515# code and make Vim startup quicker. 516#CONF_OPT_X = --without-x 517 518# X WINDOWS DIRECTORY - specify X directories 519# If configure can't find you X stuff, or if you have multiple X11 derivatives 520# installed, you may wish to specify which one to use. 521# Select nothing to let configure choose. 522# This here selects openwin (as found on sun). 523#XROOT = /usr/openwin 524#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 525 526# X11 Session Management Protocol support 527# Vim will try to use XSMP to catch the user logging out if there are unsaved 528# files. Uncomment this line to disable that (it prevents vim trying to open 529# communications with the session manager). 530#CONF_OPT_XSMP = --disable-xsmp 531 532# You may wish to include xsmp but use exclude xsmp-interact if the logout 533# XSMP functionality does not work well with your session-manager (at time of 534# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 535# applications after Vim has cancelled a logout (until Vim quits). This 536# *might* be the Vim code, but is more likely a bug in early GNOME-1. 537# This disables the dialog that asks you if you want to save files or not. 538#CONF_OPT_XSMP = --disable-xsmp-interact 539 540# COMPILER - Name of the compiler {{{1 541# The default from configure will mostly be fine, no need to change this, just 542# an example. If a compiler is defined here, configure will use it rather than 543# probing for one. It is dangerous to change this after configure was run. 544# Make will use your choice then -- but beware: Many things may change with 545# another compiler. It is wise to run 'make reconfig' to start all over 546# again. 547#CC = cc 548#CC = gcc 549#CC = clang 550 551# COMPILER FLAGS - change as you please. Either before running {{{1 552# configure or afterwards. For examples see below. 553# When using -g with some older versions of Linux you might get a 554# statically linked executable. 555# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 556#CFLAGS = -g 557#CFLAGS = -O 558 559# Optimization limits - depends on the compiler. Automatic check in configure 560# doesn't work very well, because many compilers only give a warning for 561# unrecognized arguments. 562#CFLAGS = -O -OPT:Olimit=2600 563#CFLAGS = -O -Olimit 2000 564#CFLAGS = -O -FOlimit,2000 565 566# Often used for GCC: mixed optimizing, lot of optimizing, debugging 567#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 568#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 569#CFLAGS = -g -Wall -Wmissing-prototypes 570#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 571#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 572#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 573 574# Use this with GCC to check for mistakes, unused arguments, etc. 575#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 576#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 -DU_DEBUG 577#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 578#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 579 580# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 581# allocated memory (and makes every malloc()/free() very slow). 582# Electric Fence is free (search ftp sites). 583# You may want to set the EF_PROTECT_BELOW environment variable to check the 584# other side of allocated memory. 585# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 586# as root: sysctl -w vm.max_proc_mmap=30000 587#EXTRA_LIBS = /usr/local/lib/libefence.a 588 589# Autoconf binary. 590AUTOCONF = autoconf 591 592# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 593#PURIFY = purify 594 595# NBDEBUG - debugging the netbeans interface. 596#EXTRA_DEFS = -DNBDEBUG 597 598# }}} 599 600# LINT - for running lint 601# For standard Unix lint 602LINT = lint 603LINT_OPTIONS = -beprxzF 604# For splint 605# It doesn't work well, crashes on include files and non-ascii characters. 606#LINT = splint 607#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 608 609# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 610# Might not work with GUI or Perl. 611# For unknown reasons adding "-lc" fixes a linking problem with some versions 612# of GCC. That's probably a bug in the "-pg" implementation. 613# After running Vim see the profile result with: gprof vim gmon.out | vim - 614# Need to recompile everything after changing this: "make clean" "make". 615#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 616#PROFILE_LIBS = -pg 617#PROFILE_LIBS = -pg -lc 618 619# MEMORY LEAK DETECTION 620# Requires installing the ccmalloc library. 621# Configuration is in the .ccmalloc or ~/.ccmalloc file. 622# Doesn't work very well, since memory linked to from global variables 623# (in libraries) is also marked as leaked memory. 624#LEAK_CFLAGS = -DEXITFREE 625#LEAK_LIBS = -lccmalloc 626 627##################################################### 628### Specific systems, check if yours is listed! ### {{{ 629##################################################### 630 631### Uncomment things here only if the values chosen by configure are wrong. 632### It's better to adjust configure.in and "make autoconf", if you can! 633### Then send the required changes to configure.in to the bugs list. 634 635### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 636### 637#CC = shlicc2 638#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 639 640### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 641### The first probably works on all systems 642### The second should work a bit better on newer systems 643### The third should work a bit better on HPUX 11.11 644### Information provided by: Richard Allen <[email protected]> 645#CC = c89 -D_HPUX_SOURCE 646#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 647#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 648 649### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 650### when the default (ISO) digraphs look completely wrong. 651### After changing this do "touch digraph.c; make". 652#EXTRA_DEFS = -DHPUX_DIGRAPHS 653 654### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 655### is too small to compile many routines. It produces too much defining 656### and no space errors. 657### Uncomment the following to specify a larger macro definition table. 658#CFLAGS = -Wp,-H256000 659 660### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 661### libraries in /usr/lib instead of /lib (avoiding transition links). 662### Information provided by: David Green 663#XROOT = /usr 664#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 665#GUI_INC_LOC = -I/usr/include/Motif1.2 666#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 667 668### (5) AIX 4.1.4 with cc 669#CFLAGS = -O -qmaxmem=8192 670 671### AIX with c89 (Walter Briscoe) 672#CC = c89 673#CPPFLAGS = -D_ALL_SOURCE 674 675### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 676# needed to avoid a problem where strings.h gets included 677#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 678 679### (W) Solaris with multi-threaded libraries (-lthread): 680### If suspending doesn't work properly, try using this line: 681#EXTRA_DEFS = -D_REENTRANT 682 683### (7) Solaris 2.4/2.5 with Centerline compiler 684#CC = clcc 685#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 686#CFLAGS = -O 687 688### (9) Solaris 2.x with cc (SunPro), using Athena. 689### Only required for compiling gui_at_sb.c. 690### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 691### Use one of the lines (either Full ANSI or no ANSI at all) 692#CFLAGS = $(CFLAGS) -Xc 693#CFLAGS = $(CFLAGS) -Xs 694 695### Solaris 2.3 with X11 and specific cc 696#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 697 698### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 699#CC = /usr/ucb/cc 700#EXTRA_LIBS = -R/usr/ucblib 701 702### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 703# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 704#CC = cc 705#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 706#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 707#XPM_IPATH = -I$(XPM_DIR)/include 708#EXTRA_LIBS = $(XPM_LIB) 709#EXTRA_IPATHS = $(XPM_IPATH) 710#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 711 712### Solaris with workshop compilers: Vim is unstable when compiled with 713# "-fast". Use this instead. (Shea Martin) 714#CFLAGS = -x02 -xtarget=ultra 715 716### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 717#LDFLAGS = -lw -ldl -lXmu 718#GUI_LIB_LOC = -L/usr/local/lib 719 720### (8) Unisys 6035 (Glauber Ribeiro) 721#EXTRA_LIBS = -lnsl -lsocket -lgen 722 723### When builtin functions cause problems with gcc (for Sun 4.1.x) 724#CFLAGS = -O2 -Wall -traditional -Wno-implicit 725 726### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 727#EXTRA_DEFS = -DDOMAIN 728#CFLAGS= -O -A systype,bsd4.3 729 730### Coherent 4.2.10 on Intel 386 platform 731#EXTRA_DEFS = -Dvoid=int 732#EXTRA_LIBS = -lterm -lsocket 733 734### SCO 3.2, with different library name for terminfo 735#EXTRA_LIBS = -ltinfo 736 737### UTS2 for Amdahl UTS 2.1.x 738#EXTRA_DEFS = -DUTS2 739#EXTRA_LIBS = -lsocket 740 741### UTS4 for Amdahl UTS 4.x 742#EXTRA_DEFS = -DUTS4 -Xa 743 744### USL for Unix Systems Laboratories (SYSV 4.2) 745#EXTRA_DEFS = -DUSL 746 747### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 748#CC= gcc -D_POSIX_SOURCE 749#CFLAGS= -O2 750#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 751 752### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 753### Also use the CONF_TERM_LIB below! 754#EXTRA_LIBS = -lgen 755 756### (D) QNX (by G.F. Desrochers) 757#CFLAGS = -g -O -mf -4 758 759### (F) QNX (by John Oleynick) 760# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 761# CONF_OPT_X = --without-x. 762# 2. make config 763# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 764# have -ldir (does config find it somewhere?) and -ltermcap has at 765# least one problem so I use termlib.o instead. The problem with 766# termcap is that it segfaults if you call it with the name of 767# a non-existent terminal type. 768# 4. edit auto/config.h and add #define USE_TMPNAM 769# 5. add termlib.o to OBJ 770# 6. make 771 772### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 773#EXTRA_LIBS = -lgen 774 775### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 776#EXTRA_LIBS = -lgen -lnsl 777### For SINIX-Y this is needed for the right prototype of gettimeofday() 778#EXTRA_DEFS = -D_XPG_IV 779 780### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 781# Use both "-F O3" lines for optimization or the "-g" line for debugging 782#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 783#CFLAGS = -F O3 -DSINIXN 784#LDFLAGS = -F O3 785#CFLAGS = -g -DSINIXN 786 787### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 788#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 789#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 790 791### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 792#GUI_INC_LOC = -I/usr/include 793#GUI_LIB_LOC = -L/usr/lib 794#EXTRA_LIBS = -lgen 795 796### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 797#GUI_INC_LOC = -I/usr/necccs/include 798#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 799#XROOT = /usr/necccs 800#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 801#EXTRA_LIBS = -lsocket -lgen 802 803### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 804# Not needed for Irix 5.3, Ives Aerts reported 805#EXTRA_LIBS = -lmalloc -lc_s 806# Irix 4.0, when regexp and regcmp cannot be found when linking: 807#EXTRA_LIBS = -lmalloc -lc_s -lPW 808 809### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 810# Note: This newer option style is used with the MipsPro compilers ONLY if 811# you are compiling an "n32" or "64" ABI binary (use either a -n32 812# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 813# then the CFLAGS option format will be the typical style (i.e. 814# -Olimit 3000). 815#CFLAGS = -OPT:Olimit=3000 -O 816 817### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 818# compiler features! Beware, the optimization is EXTREMELY thorough 819# and takes quite a long time. 820# Note: See the note above. Here, the -mips3 option automatically 821# enables either the "n32" or "64" ABI, depending on what machine you 822# are compiling on (n32 is explicitly enabled here, just to make sure). 823#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 824#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 825 826### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 827### Suggested by Jon Wright <[email protected]>. 828### Tested on R8000 IRIX6.1 Power Indigo2. 829### Check /etc/compiler.defaults for your compiler settings. 830# either (for 64 bit pointers) uncomment the following line 831#GUI_LIB_LOC = -L/usr/lib64 832# then 833# 1) make config 834# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 835# 3) make 836# 837# or (for 32bit pointers) uncomment the following line 838#EXTRA_DEFS = -n32 839#GUI_LIB_LOC = -L/usr/lib32 840# then 841# 1) make config 842# 2) edit auto/config.mk, add -n32 to LDFLAGS 843# 3) make 844# 845#Alternatively: use -o32 instead of -n32. 846### 847 848### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 849### which is found by configure, doesn't work correctly. Symptom is the 850### error message "Termcap entry too long". Uncomment the next line. 851### On AIX 4.2.1 (and other versions probably), libtermcap is reported 852### not to display properly. 853### after changing this, you need to do "make reconfig". 854#CONF_TERM_LIB = --with-tlib=curses 855 856### (E) If you want to use termlib library instead of the automatically found 857### one. After changing this, you need to do "make reconfig". 858#CONF_TERM_LIB = --with-tlib=termlib 859 860### (a) ESIX V4.2 (Reinhard Wobst) 861#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 862 863### (c) Tandem/NSK (Matthew Woehlke) 864#EXTRA_LIBS = -lfloss 865 866### If you want to use ncurses library instead of the automatically found one 867### after changing this, you need to do "make reconfig". 868#CONF_TERM_LIB = --with-tlib=ncurses 869 870### For GCC on MSDOS, the ".exe" suffix will be added. 871#EXEEXT = .exe 872#LNKEXT = .exe 873 874### (O) For LynxOS 2.5.0, tested on PC. 875#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 876### For LynxOS 3.0.1, tested on PPC 877#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 878### For LynxOS 3.1.0, tested on PC 879#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 880 881 882### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 883### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 884#CFLAGS = -O -Qtarget=m88110compat 885#EXTRA_LIBS = -lgen 886 887# The value of QUOTESED comes from auto/config.mk. 888# Uncomment the next line to use the default value. 889# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 890 891##################### end of system specific lines ################### }}} 892 893### Names of the programs and targets {{{1 894VIMTARGET = $(VIMNAME)$(EXEEXT) 895EXTARGET = $(EXNAME)$(LNKEXT) 896VIEWTARGET = $(VIEWNAME)$(LNKEXT) 897GVIMNAME = g$(VIMNAME) 898GVIMTARGET = $(GVIMNAME)$(LNKEXT) 899GVIEWNAME = g$(VIEWNAME) 900GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 901RVIMNAME = r$(VIMNAME) 902RVIMTARGET = $(RVIMNAME)$(LNKEXT) 903RVIEWNAME = r$(VIEWNAME) 904RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 905RGVIMNAME = r$(GVIMNAME) 906RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 907RGVIEWNAME = r$(GVIEWNAME) 908RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 909VIMDIFFNAME = $(VIMNAME)diff 910GVIMDIFFNAME = g$(VIMDIFFNAME) 911VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 912GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 913EVIMNAME = e$(VIMNAME) 914EVIMTARGET = $(EVIMNAME)$(LNKEXT) 915EVIEWNAME = e$(VIEWNAME) 916EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 917 918### Names of the tools that are also made {{{1 919TOOLS = xxd/xxd$(EXEEXT) 920 921### Installation directories. The defaults come from configure. {{{1 922# 923### prefix the top directory for the data (default "/usr/local") 924# 925# Uncomment the next line to install Vim in your home directory. 926#prefix = $(HOME) 927 928### exec_prefix is the top directory for the executable (default $(prefix)) 929# 930# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 931#exec_prefix = /usr/machine 932 933### BINDIR dir for the executable (default "$(exec_prefix)/bin") 934### MANDIR dir for the manual pages (default "$(prefix)/man") 935### DATADIR dir for the other files (default "$(prefix)/lib" or 936# "$(prefix)/share") 937# They may be different when using different architectures for the 938# executable and a common directory for the other files. 939# 940# Uncomment the next line to install Vim in "/usr/bin" 941#BINDIR = /usr/bin 942# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 943#MANDIR = /usr/share/man 944# Uncomment the next line to install Vim help files in "/usr/share/vim" 945#DATADIR = /usr/share 946 947### DESTDIR root of the installation tree. This is prepended to the other 948# directories. This directory must exist. 949#DESTDIR = ~/pkg/vim 950 951### Directory of the man pages 952MAN1DIR = /man1 953 954### Vim version (adjusted by a script) 955VIMMAJOR = 7 956VIMMINOR = 4 957 958### Location of Vim files (should not need to be changed, and {{{1 959### some things might not work when they are changed!) 960VIMDIR = /vim 961VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 962HELPSUBDIR = /doc 963COLSUBDIR = /colors 964SYNSUBDIR = /syntax 965INDSUBDIR = /indent 966AUTOSUBDIR = /autoload 967PLUGSUBDIR = /plugin 968FTPLUGSUBDIR = /ftplugin 969LANGSUBDIR = /lang 970COMPSUBDIR = /compiler 971KMAPSUBDIR = /keymap 972MACROSUBDIR = /macros 973TOOLSSUBDIR = /tools 974TUTORSUBDIR = /tutor 975SPELLSUBDIR = /spell 976PRINTSUBDIR = /print 977PODIR = po 978 979### VIMLOC common root of the Vim files (all versions) 980### VIMRTLOC common root of the runtime Vim files (this version) 981### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 982### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 983### HELPSUBLOC location for help files 984### COLSUBLOC location for colorscheme files 985### SYNSUBLOC location for syntax files 986### INDSUBLOC location for indent files 987### AUTOSUBLOC location for standard autoload files 988### PLUGSUBLOC location for standard plugin files 989### FTPLUGSUBLOC location for ftplugin files 990### LANGSUBLOC location for language files 991### COMPSUBLOC location for compiler files 992### KMAPSUBLOC location for keymap files 993### MACROSUBLOC location for macro files 994### TOOLSSUBLOC location for tools files 995### TUTORSUBLOC location for tutor files 996### SPELLSUBLOC location for spell files 997### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 998### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 999### You can override these if you want to install them somewhere else. 1000### Edit feature.h for compile-time settings. 1001VIMLOC = $(DATADIR)$(VIMDIR) 1002VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1003VIMRCLOC = $(VIMLOC) 1004HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1005COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1006SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1007INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1008AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1009PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1010FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1011LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1012COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1013KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1014MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1015TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1016TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1017SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1018PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1019SCRIPTLOC = $(VIMRTLOC) 1020 1021### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1022### the runtime directory is not below it. 1023#VIMRUNTIMEDIR = $(VIMRTLOC) 1024 1025### Name of the evim file target. 1026EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1027MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1028 1029### Name of the menu file target. 1030SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1031SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1032SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1033 1034### Name of the bugreport file target. 1035SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1036 1037### Name of the file type detection file target. 1038SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1039 1040### Name of the file type detection file target. 1041SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1042 1043### Name of the file type detection script file target. 1044SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1045 1046### Name of the ftplugin-on file target. 1047SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1048 1049### Name of the ftplugin-off file target. 1050SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1051 1052### Name of the indent-on file target. 1053SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1054 1055### Name of the indent-off file target. 1056SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1057 1058### Name of the option window script file target. 1059SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1060 1061# Program to install the program in the target directory. Could also be "mv". 1062INSTALL_PROG = cp 1063 1064# Program to install the data in the target directory. Cannot be "mv"! 1065INSTALL_DATA = cp 1066INSTALL_DATA_R = cp -r 1067 1068### Program to run on installed binary. Use the second one to disable strip. 1069#STRIP = strip 1070#STRIP = /bin/true 1071 1072### Permissions for binaries {{{1 1073BINMOD = 755 1074 1075### Permissions for man page 1076MANMOD = 644 1077 1078### Permissions for help files 1079HELPMOD = 644 1080 1081### Permissions for Perl and shell scripts 1082SCRIPTMOD = 755 1083 1084### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1085VIMSCRIPTMOD = 644 1086 1087### Permissions for all directories that are created 1088DIRMOD = 755 1089 1090### Permissions for all other files that are created 1091FILEMOD = 644 1092 1093# Where to copy the man and help files from 1094HELPSOURCE = ../runtime/doc 1095 1096# Where to copy the script files from (menu, bugreport) 1097SCRIPTSOURCE = ../runtime 1098 1099# Where to copy the colorscheme files from 1100COLSOURCE = ../runtime/colors 1101 1102# Where to copy the syntax files from 1103SYNSOURCE = ../runtime/syntax 1104 1105# Where to copy the indent files from 1106INDSOURCE = ../runtime/indent 1107 1108# Where to copy the standard plugin files from 1109AUTOSOURCE = ../runtime/autoload 1110 1111# Where to copy the standard plugin files from 1112PLUGSOURCE = ../runtime/plugin 1113 1114# Where to copy the ftplugin files from 1115FTPLUGSOURCE = ../runtime/ftplugin 1116 1117# Where to copy the macro files from 1118MACROSOURCE = ../runtime/macros 1119 1120# Where to copy the tools files from 1121TOOLSSOURCE = ../runtime/tools 1122 1123# Where to copy the tutor files from 1124TUTORSOURCE = ../runtime/tutor 1125 1126# Where to copy the spell files from 1127SPELLSOURCE = ../runtime/spell 1128 1129# Where to look for language specific files 1130LANGSOURCE = ../runtime/lang 1131 1132# Where to look for compiler files 1133COMPSOURCE = ../runtime/compiler 1134 1135# Where to look for keymap files 1136KMAPSOURCE = ../runtime/keymap 1137 1138# Where to look for print resource files 1139PRINTSOURCE = ../runtime/print 1140 1141# If you are using Linux, you might want to use this to make vim the 1142# default vi editor, it will create a link from vi to Vim when doing 1143# "make install". An existing file will be overwritten! 1144# When not using it, some make programs can't handle an undefined $(LINKIT). 1145#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1146LINKIT = @echo >/dev/null 1147 1148### 1149### GRAPHICAL USER INTERFACE (GUI). {{{1 1150### 'configure --enable-gui' can enable one of these for you if you did set 1151### a corresponding CONF_OPT_GUI above and have X11. 1152### Override configures choice by uncommenting all the following lines. 1153### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1154### for enabling the Athena or Motif GUI. 1155#GUI_SRC = $(NONE_SRC) 1156#GUI_OBJ = $(NONE_OBJ) 1157#GUI_DEFS = $(NONE_DEFS) 1158#GUI_IPATH = $(NONE_IPATH) 1159#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1160#GUI_LIBS1 = $(NONE_LIBS1) 1161#GUI_LIBS2 = $(NONE_LIBS2) 1162#GUI_INSTALL = $(NONE_INSTALL) 1163#GUI_TARGETS = $(NONE_TARGETS) 1164#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1165#GUI_TESTTARGET = $(NONE_TESTTARGET) 1166#GUI_BUNDLE = $(NONE_BUNDLE) 1167 1168# Without a GUI install the normal way. 1169NONE_INSTALL = install_normal 1170 1171### GTK GUI 1172GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1173 gui_beval.c 1174GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1175 objects/pty.o objects/gui_gtk_f.o \ 1176 objects/gui_beval.o 1177GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1178GTK_IPATH = $(GUI_INC_LOC) 1179GTK_LIBS_DIR = $(GUI_LIB_LOC) 1180GTK_LIBS1 = 1181GTK_LIBS2 = $(GTK_LIBNAME) 1182GTK_INSTALL = install_normal install_gui_extra 1183GTK_TARGETS = installglinks 1184GTK_MAN_TARGETS = yes 1185GTK_TESTTARGET = gui 1186GTK_BUNDLE = 1187 1188### Motif GUI 1189MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1190 gui_xmdlg.c gui_xmebw.c 1191MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1192 objects/pty.o objects/gui_beval.o \ 1193 objects/gui_xmdlg.o objects/gui_xmebw.o 1194MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1195MOTIF_IPATH = $(GUI_INC_LOC) 1196MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1197MOTIF_LIBS1 = 1198MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1199MOTIF_INSTALL = install_normal install_gui_extra 1200MOTIF_TARGETS = installglinks 1201MOTIF_MAN_TARGETS = yes 1202MOTIF_TESTTARGET = gui 1203MOTIF_BUNDLE = 1204 1205### Athena GUI 1206### Use Xaw3d to make the menus look a little bit nicer 1207#XAW_LIB = -lXaw3d 1208XAW_LIB = -lXaw 1209 1210### When using Xaw3d, uncomment/comment the following lines to also get the 1211### scrollbars from Xaw3d. 1212#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1213#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1214# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1215#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1216# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1217# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1218ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1219 gui_at_sb.c gui_at_fs.c 1220ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1221 objects/pty.o objects/gui_beval.o \ 1222 objects/gui_at_sb.o objects/gui_at_fs.o 1223ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1224 1225ATHENA_IPATH = $(GUI_INC_LOC) 1226ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1227ATHENA_LIBS1 = $(XAW_LIB) 1228ATHENA_LIBS2 = -lXt 1229ATHENA_INSTALL = install_normal install_gui_extra 1230ATHENA_TARGETS = installglinks 1231ATHENA_MAN_TARGETS = yes 1232ATHENA_TESTTARGET = gui 1233ATHENA_BUNDLE = 1234 1235### neXtaw GUI 1236NEXTAW_LIB = -lneXtaw 1237 1238NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1239NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1240 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1241NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1242 1243NEXTAW_IPATH = $(GUI_INC_LOC) 1244NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1245NEXTAW_LIBS1 = $(NEXTAW_LIB) 1246NEXTAW_LIBS2 = -lXt 1247NEXTAW_INSTALL = install_normal install_gui_extra 1248NEXTAW_TARGETS = installglinks 1249NEXTAW_MAN_TARGETS = yes 1250NEXTAW_TESTTARGET = gui 1251NEXTAW_BUNDLE = 1252 1253### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1254# errors: ld: Undefined symbol 1255# _get_wmShellWidgetClass 1256# _get_applicationShellWidgetClass 1257# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1258# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1259#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1260# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1261# too: 1262#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1263 1264# PHOTON GUI 1265PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1266PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1267PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1268PHOTONGUI_IPATH = 1269PHOTONGUI_LIBS_DIR = 1270PHOTONGUI_LIBS1 = -lph -lphexlib 1271PHOTONGUI_LIBS2 = 1272PHOTONGUI_INSTALL = install_normal install_gui_extra 1273PHOTONGUI_TARGETS = installglinks 1274PHOTONGUI_MAN_TARGETS = yes 1275PHOTONGUI_TESTTARGET = gui 1276PHOTONGUI_BUNDLE = 1277 1278# CARBON GUI 1279CARBONGUI_SRC = gui.c gui_mac.c 1280CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1281CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1282 -Wall -Wno-unknown-pragmas \ 1283 -mdynamic-no-pic -pipe 1284CARBONGUI_IPATH = -I. -Iproto 1285CARBONGUI_LIBS_DIR = 1286CARBONGUI_LIBS1 = -framework Carbon 1287CARBONGUI_LIBS2 = 1288CARBONGUI_INSTALL = install_macosx 1289CARBONGUI_TARGETS = 1290CARBONGUI_MAN_TARGETS = 1291CARBONGUI_TESTTARGET = gui 1292CARBONGUI_BUNDLE = gui_bundle 1293APPDIR = $(VIMNAME).app 1294CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1295 1296# All GUI files 1297ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1298ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1299 1300# }}} 1301 1302### Command to create dependencies based on #include "..." 1303### prototype headers are ignored due to -DPROTO, system 1304### headers #include <...> are ignored if we use the -MM option, as 1305### e.g. provided by gcc-cpp. 1306### Include FEAT_GUI to get dependency on gui.h 1307### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1308CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1309 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1310 1311# flags for cproto 1312# This is for cproto 3 patchlevel 8 or below 1313# __inline, __attribute__ and __extension__ are not recognized by cproto 1314# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1315#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1316# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1317# -D__extension__= -D__restrict="" \ 1318# -D__gnuc_va_list=char -D__builtin_va_list=char 1319 1320# 1321# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1322# __inline and __attribute__ are now recognized by cproto 1323# -D"foo()=" is not supported by all compilers so do not use it 1324NO_ATTR= 1325# 1326# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1327# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1328# 1329# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1330PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1331 1332 1333################################################ 1334## no changes required below this line ## 1335################################################ 1336 1337SHELL = /bin/sh 1338 1339.SUFFIXES: 1340.SUFFIXES: .c .o .pro 1341 1342PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1343POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(TCL_CFLAGS) $(EXTRA_DEFS) 1344 1345ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(LEAK_CFLAGS) $(POST_DEFS) 1346 1347# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1348# with "-E". 1349OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1350 1351LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1352 1353LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1354 1355DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1356 1357# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1358# needed by racket. 1359ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1360ALL_LIBS = \ 1361 $(GUI_LIBS1) \ 1362 $(GUI_X_LIBS) \ 1363 $(GUI_LIBS2) \ 1364 $(X_PRE_LIBS) \ 1365 $(X_LIBS) \ 1366 $(X_EXTRA_LIBS) \ 1367 $(MZSCHEME_LIBS) \ 1368 $(LIBS) \ 1369 $(EXTRA_LIBS) \ 1370 $(LUA_LIBS) \ 1371 $(PERL_LIBS) \ 1372 $(PYTHON_LIBS) \ 1373 $(PYTHON3_LIBS) \ 1374 $(TCL_LIBS) \ 1375 $(RUBY_LIBS) \ 1376 $(PROFILE_LIBS) \ 1377 $(LEAK_LIBS) 1378 1379# abbreviations 1380DEST_BIN = $(DESTDIR)$(BINDIR) 1381DEST_VIM = $(DESTDIR)$(VIMLOC) 1382DEST_RT = $(DESTDIR)$(VIMRTLOC) 1383DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1384DEST_COL = $(DESTDIR)$(COLSUBLOC) 1385DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1386DEST_IND = $(DESTDIR)$(INDSUBLOC) 1387DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1388DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1389DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1390DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1391DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1392DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1393DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1394DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1395DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1396DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1397DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1398DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1399DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1400 1401# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1402# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1403# directory first. 1404# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1405DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1406DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1407DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1408DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1409DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1410DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1411DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1412DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1413DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1414DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1415DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1416DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1417DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1418 1419# BASIC_SRC: files that are always used 1420# GUI_SRC: extra GUI files for current configuration 1421# ALL_GUI_SRC: all GUI files for Unix 1422# 1423# SRC: files used for current configuration 1424# TAGS_SRC: source files used for make tags 1425# TAGS_INCL: include files used for make tags 1426# ALL_SRC: source files used for make depend and make lint 1427 1428TAGS_INCL = *.h 1429 1430BASIC_SRC = \ 1431 blowfish.c \ 1432 buffer.c \ 1433 charset.c \ 1434 crypt.c \ 1435 crypt_zip.c \ 1436 diff.c \ 1437 digraph.c \ 1438 edit.c \ 1439 eval.c \ 1440 ex_cmds.c \ 1441 ex_cmds2.c \ 1442 ex_docmd.c \ 1443 ex_eval.c \ 1444 ex_getln.c \ 1445 fileio.c \ 1446 fold.c \ 1447 getchar.c \ 1448 hardcopy.c \ 1449 hashtab.c \ 1450 if_cscope.c \ 1451 if_xcmdsrv.c \ 1452 main.c \ 1453 mark.c \ 1454 memfile.c \ 1455 memline.c \ 1456 menu.c \ 1457 message.c \ 1458 misc1.c \ 1459 misc2.c \ 1460 move.c \ 1461 mbyte.c \ 1462 normal.c \ 1463 ops.c \ 1464 option.c \ 1465 os_unix.c \ 1466 auto/pathdef.c \ 1467 popupmnu.c \ 1468 quickfix.c \ 1469 regexp.c \ 1470 screen.c \ 1471 search.c \ 1472 sha256.c \ 1473 spell.c \ 1474 syntax.c \ 1475 tag.c \ 1476 term.c \ 1477 ui.c \ 1478 undo.c \ 1479 version.c \ 1480 window.c \ 1481 $(OS_EXTRA_SRC) 1482 1483SRC = $(BASIC_SRC) \ 1484 $(GUI_SRC) \ 1485 $(HANGULIN_SRC) \ 1486 $(LUA_SRC) \ 1487 $(MZSCHEME_SRC) \ 1488 $(PERL_SRC) \ 1489 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1490 $(TCL_SRC) \ 1491 $(RUBY_SRC) \ 1492 $(SNIFF_SRC) \ 1493 $(WORKSHOP_SRC) \ 1494 $(WSDEBUG_SRC) 1495 1496TAGS_SRC = *.c *.cpp if_perl.xs 1497 1498EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1499 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1500 gui_beval.c workshop.c wsdebug.c integration.c netbeans.c 1501 1502# Unittest files 1503MEMFILE_TEST_SRC = memfile_test.c 1504MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1505 1506UNITTEST_SRC = $(MEMFILE_TEST_SRC) 1507UNITTEST_TARGETS = $(MEMFILE_TEST_TARGET) 1508 1509# All sources, also the ones that are not configured 1510ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) $(EXTRA_SRC) 1511 1512# Which files to check with lint. Select one of these three lines. ALL_SRC 1513# checks more, but may not work well for checking a GUI that wasn't configured. 1514# The perl sources also don't work well with lint. 1515LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1516 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1517#LINT_SRC = $(SRC) 1518#LINT_SRC = $(ALL_SRC) 1519#LINT_SRC = $(BASIC_SRC) 1520 1521OBJ_COMMON = \ 1522 objects/buffer.o \ 1523 objects/blowfish.o \ 1524 objects/charset.o \ 1525 objects/crypt.o \ 1526 objects/crypt_zip.o \ 1527 objects/diff.o \ 1528 objects/digraph.o \ 1529 objects/edit.o \ 1530 objects/eval.o \ 1531 objects/ex_cmds.o \ 1532 objects/ex_cmds2.o \ 1533 objects/ex_docmd.o \ 1534 objects/ex_eval.o \ 1535 objects/ex_getln.o \ 1536 objects/fileio.o \ 1537 objects/fold.o \ 1538 objects/getchar.o \ 1539 objects/hardcopy.o \ 1540 objects/hashtab.o \ 1541 $(HANGULIN_OBJ) \ 1542 objects/if_cscope.o \ 1543 objects/if_xcmdsrv.o \ 1544 objects/mark.o \ 1545 objects/memline.o \ 1546 objects/menu.o \ 1547 objects/message.o \ 1548 objects/misc1.o \ 1549 objects/misc2.o \ 1550 objects/move.o \ 1551 objects/mbyte.o \ 1552 objects/normal.o \ 1553 objects/ops.o \ 1554 objects/option.o \ 1555 objects/os_unix.o \ 1556 objects/pathdef.o \ 1557 objects/popupmnu.o \ 1558 objects/quickfix.o \ 1559 objects/regexp.o \ 1560 objects/screen.o \ 1561 objects/search.o \ 1562 objects/sha256.o \ 1563 objects/spell.o \ 1564 objects/syntax.o \ 1565 $(SNIFF_OBJ) \ 1566 objects/tag.o \ 1567 objects/term.o \ 1568 objects/ui.o \ 1569 objects/undo.o \ 1570 objects/version.o \ 1571 objects/window.o \ 1572 $(GUI_OBJ) \ 1573 $(LUA_OBJ) \ 1574 $(MZSCHEME_OBJ) \ 1575 $(PERL_OBJ) \ 1576 $(PYTHON_OBJ) \ 1577 $(PYTHON3_OBJ) \ 1578 $(TCL_OBJ) \ 1579 $(RUBY_OBJ) \ 1580 $(OS_EXTRA_OBJ) \ 1581 $(WORKSHOP_OBJ) \ 1582 $(NETBEANS_OBJ) \ 1583 $(WSDEBUG_OBJ) 1584 1585OBJ = $(OBJ_COMMON) \ 1586 objects/main.o \ 1587 objects/memfile.o 1588 1589MEMFILE_TEST_OBJ = $(OBJ_COMMON) \ 1590 objects/memfile_test.o 1591 1592PRO_AUTO = \ 1593 blowfish.pro \ 1594 buffer.pro \ 1595 charset.pro \ 1596 crypt.pro \ 1597 crypt_zip.pro \ 1598 diff.pro \ 1599 digraph.pro \ 1600 edit.pro \ 1601 eval.pro \ 1602 ex_cmds.pro \ 1603 ex_cmds2.pro \ 1604 ex_docmd.pro \ 1605 ex_eval.pro \ 1606 ex_getln.pro \ 1607 fileio.pro \ 1608 fold.pro \ 1609 getchar.pro \ 1610 hardcopy.pro \ 1611 hashtab.pro \ 1612 hangulin.pro \ 1613 if_cscope.pro \ 1614 if_xcmdsrv.pro \ 1615 if_python.pro \ 1616 if_python3.pro \ 1617 if_ruby.pro \ 1618 main.pro \ 1619 mark.pro \ 1620 memfile.pro \ 1621 memline.pro \ 1622 menu.pro \ 1623 message.pro \ 1624 misc1.pro \ 1625 misc2.pro \ 1626 move.pro \ 1627 mbyte.pro \ 1628 normal.pro \ 1629 ops.pro \ 1630 option.pro \ 1631 os_unix.pro \ 1632 popupmnu.pro \ 1633 quickfix.pro \ 1634 regexp.pro \ 1635 screen.pro \ 1636 search.pro \ 1637 sha256.pro \ 1638 spell.pro \ 1639 syntax.pro \ 1640 tag.pro \ 1641 term.pro \ 1642 termlib.pro \ 1643 ui.pro \ 1644 undo.pro \ 1645 version.pro \ 1646 window.pro \ 1647 gui_beval.pro \ 1648 workshop.pro \ 1649 netbeans.pro \ 1650 $(ALL_GUI_PRO) \ 1651 $(TCL_PRO) 1652 1653# Resources used for the Mac are in one directory. 1654RSRC_DIR = os_mac_rsrc 1655 1656PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1657 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1658 1659# Default target is making the executable and tools 1660all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1661 1662tools: $(TOOLS) 1663 1664# Run configure with all the setting from above. 1665# 1666# Note: auto/config.h doesn't depend on configure, because running configure 1667# doesn't always update auto/config.h. The timestamp isn't changed if the 1668# file contents didn't change (to avoid recompiling everything). Including a 1669# dependency on auto/config.h would cause running configure each time when 1670# auto/config.h isn't updated. The dependency on auto/config.mk should make 1671# sure configure is run when it's needed. 1672# 1673# Remove the config.cache every time, once in a while it causes problems that 1674# are very hard to figure out. 1675# 1676config auto/config.mk: auto/configure config.mk.in config.h.in 1677 -rm -f auto/config.cache 1678 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1679 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1680 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1681 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1682 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1683 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1684 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1685 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1686 $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1687 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1688 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1689 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1690 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1691 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1692 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1693 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1694 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1695 $(CONF_OPT_SYSMOUSE); \ 1696 fi 1697 1698# Use "make reconfig" to rerun configure without cached values. 1699# When config.h changes, most things will be recompiled automatically. 1700# Invoke $(MAKE) to run config with the empty auto/config.mk. 1701# Invoke $(MAKE) to build all with the filled auto/config.mk. 1702reconfig: scratch clean 1703 $(MAKE) -f Makefile config 1704 $(MAKE) -f Makefile all 1705 1706# Run autoconf to produce auto/configure. 1707# Note: 1708# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1709# producing auto/configure. 1710# - autoconf is not run automatically, because a patch usually changes both 1711# configure.in and auto/configure but can't update the timestamps. People 1712# who do not have (the correct version of) autoconf would run into trouble. 1713# 1714# Two tricks are required to make autoconf put its output in the "auto" dir: 1715# - Temporarily move the ./configure script to ./configure.save. Don't 1716# overwrite it, it's probably the result of an aborted autoconf. 1717# - Use sed to change ./config.log to auto/config.log in the configure script. 1718# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1719# care of: 1720# - configure.lineno: has the line numbers replaced with $LINENO. That 1721# improves patches a LOT, thus use it instead (until someone says it doesn't 1722# work on some system). 1723# - autom4te.cache directory is created and not cleaned up. Delete it. 1724# - Uses ">config.log" instead of "./config.log". 1725autoconf: 1726 if test ! -f configure.save; then mv configure configure.save; fi 1727 $(AUTOCONF) 1728 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1729 chmod 755 auto/configure 1730 mv -f configure.save configure 1731 -rm -rf autom4te.cache 1732 -rm -f auto/config.status auto/config.cache 1733 1734# Re-execute this Makefile to include the new auto/config.mk produced by 1735# configure Only used when typing "make" with a fresh auto/config.mk. 1736myself: 1737 $(MAKE) -f Makefile all 1738 1739 1740# The normal command to compile a .c file to its .o file. 1741CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1742 1743 1744# Link the target for normal use or debugging. 1745# A shell script is used to try linking without unnecessary libraries. 1746$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1747 $(CCC) version.c -o objects/version.o 1748 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1749 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1750 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1751 sh $(srcdir)/link.sh 1752 1753xxd/xxd$(EXEEXT): xxd/xxd.c 1754 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1755 $(MAKE) -f Makefile 1756 1757# Build the language specific files if they were unpacked. 1758# Generate the converted .mo files separately, it's no problem if this fails. 1759languages: 1760 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1761 cd $(PODIR); \ 1762 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1763 fi 1764 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1765 cd $(PODIR); \ 1766 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1767 fi 1768 1769# Update the *.po files for changes in the sources. Only run manually. 1770update-po: 1771 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1772 1773# Generate function prototypes. This is not needed to compile vim, but if 1774# you want to use it, cproto is out there on the net somewhere -- Webb 1775# 1776# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1777# few include files that can not be found, that's OK. 1778 1779proto: $(PRO_AUTO) $(PRO_MANUAL) 1780 1781# Filter out arguments that cproto doesn't support. 1782# Don't pass "-pthread" to cproto, it sees it as a list of individual flags. 1783# Don't pass "-fstack-protector" to cproto, for the same reason. 1784# Don't pass "-g" to cproto. 1785# The -E"gcc -E" argument must be separate to avoid problems with shell 1786# quoting. 1787CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1788 `echo '$(LINT_CFLAGS)' | sed -e 's/-pthread//g' -e 's/-fstack-protector//g' -e 's/\ -g\ / /g'` 1789 1790### Would be nice if this would work for "normal" make. 1791### Currently it only works for (Free)BSD make. 1792#$(PRO_AUTO): $$(*F).c 1793# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1794 1795# Always define FEAT_GUI. This may generate a few warnings if it's also 1796# defined in auto/config.h, you can ignore that. 1797.c.pro: 1798 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1799 echo "/* vim: set ft=c : */" >> proto/$@ 1800 1801os_amiga.pro: os_amiga.c 1802 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1803 echo "/* vim: set ft=c : */" >> proto/$@ 1804 1805os_msdos.pro: os_msdos.c 1806 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1807 echo "/* vim: set ft=c : */" >> proto/$@ 1808 1809os_win16.pro: os_win16.c 1810 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1811 echo "/* vim: set ft=c : */" >> proto/$@ 1812 1813os_win32.pro: os_win32.c 1814 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1815 echo "/* vim: set ft=c : */" >> proto/$@ 1816 1817os_mswin.pro: os_mswin.c 1818 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1819 echo "/* vim: set ft=c : */" >> proto/$@ 1820 1821winclip.pro: winclip.c 1822 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1823 echo "/* vim: set ft=c : */" >> proto/$@ 1824 1825os_beos.pro: os_beos.c 1826 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1827 echo "/* vim: set ft=c : */" >> proto/$@ 1828 1829os_vms.pro: os_vms.c 1830# must use os_vms_conf.h for auto/config.h 1831 mv auto/config.h auto/config.h.save 1832 cp os_vms_conf.h auto/config.h 1833 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1834 echo "/* vim: set ft=c : */" >> proto/$@ 1835 rm auto/config.h 1836 mv auto/config.h.save auto/config.h 1837 1838# if_perl.pro is special: Use the generated if_perl.c for input and remove 1839# prototypes for local functions. 1840if_perl.pro: auto/if_perl.c 1841 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1842 1843 1844notags: 1845 -rm -f tags 1846 1847# Note: tags is made for the currently configured version, can't include both 1848# Motif and Athena GUI 1849# You can ignore error messages for missing files. 1850tags TAGS: notags 1851 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1852 1853# Make a highlight file for types. Requires Exuberant ctags and awk 1854types: types.vim 1855types.vim: $(TAGS_SRC) $(TAGS_INCL) 1856 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1857 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1858 {printf("%s ", $$1)}END{print ""}' > $@ 1859 1860# Execute the test scripts. Run these after compiling Vim, before installing. 1861# This doesn't depend on $(VIMTARGET), because that won't work when configure 1862# wasn't run yet. Restart make to build it instead. 1863# 1864# This will produce a lot of garbage on your screen, including a few error 1865# messages. Don't worry about that. 1866# If there is a real error, there will be a difference between "testXX.out" and 1867# a "testXX.ok" file. 1868# If everything is alright, the final message will be "ALL DONE". If not you 1869# get "TEST FAILURE". 1870# 1871test check: 1872 $(MAKE) -f Makefile $(VIMTARGET) 1873 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1874 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1875 fi 1876 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1877 ln -s $(VIMTARGET) vim; \ 1878 fi 1879 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 1880 $(MAKE) -f Makefile unittest 1881 1882unittesttargets: 1883 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 1884 1885unittest unittests: $(UNITTEST_TARGETS) 1886 @for t in $(UNITTEST_TARGETS); do \ 1887 ./$$t || exit 1; echo $$t passed; \ 1888 done 1889 1890# Run individual test, assuming that Vim was already compiled. 1891test1 test2 test3 test4 test5 test6 test7 test8 test9 \ 1892 test_autoformat_join \ 1893 test_breakindent \ 1894 test_changelist \ 1895 test_eval \ 1896 test_insertcount \ 1897 test_listlbr \ 1898 test_listlbr_utf8 \ 1899 test_options \ 1900 test_qf_title \ 1901 test10 test11 test12 test13 test14 test15 test16 test17 test18 test19 \ 1902 test20 test21 test22 test23 test24 test25 test26 test27 test28 test29 \ 1903 test30 test31 test32 test33 test34 test35 test36 test37 test38 test39 \ 1904 test40 test41 test42 test43 test44 test45 test46 test47 test48 test49 \ 1905 test50 test51 test52 test53 test54 test55 test56 test57 test58 test59 \ 1906 test60 test61 test62 test63 test64 test65 test66 test67 test68 test69 \ 1907 test70 test71 test72 test73 test74 test75 test76 test77 test78 test79 \ 1908 test80 test81 test82 test83 test84 test85 test86 test87 test88 test89 \ 1909 test90 test91 test92 test93 test94 test95 test96 test97 test98 test99 \ 1910 test100 test101 test102 test103 test104 test105 test106 test107: 1911 cd testdir; rm $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 1912 1913testclean: 1914 cd testdir; $(MAKE) -f Makefile clean 1915 if test -d $(PODIR); then \ 1916 cd $(PODIR); $(MAKE) checkclean; \ 1917 fi 1918 1919# Unittests 1920# It's build just like Vim to satisfy all dependencies. 1921$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 1922 $(CCC) version.c -o objects/version.o 1923 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1924 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 1925 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1926 sh $(srcdir)/link.sh 1927 1928# install targets 1929 1930install: $(GUI_INSTALL) 1931 1932install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1933 1934install_gui_extra: installgtutorbin 1935 1936installvim: installvimbin installtutorbin \ 1937 installruntime installlinks installmanlinks 1938 1939# 1940# Avoid overwriting an existing executable, somebody might be running it and 1941# overwriting it could cause it to crash. Deleting it is OK, it won't be 1942# really deleted until all running processes for it have exited. It is 1943# renamed first, in case the deleting doesn't work. 1944# 1945# If you want to keep an older version, rename it before running "make 1946# install". 1947# 1948installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1949 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1950 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1951 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1952 fi 1953 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1954 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1955 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1956# may create a link to the new executable from /usr/bin/vi 1957 -$(LINKIT) 1958 1959# Long list of arguments for the shell script that installs the manual pages 1960# for one language. 1961INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1962 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1963 1964# Install most of the runtime files 1965installruntime: installrtbase installmacros installtutor installspell 1966 1967# install the help files; first adjust the contents for the final location 1968installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1969 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1970 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1971 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1972 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1973 @echo generating help tags 1974# Generate the help tags with ":helptags" to handle all languages. 1975 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1976 cd $(HELPSOURCE); \ 1977 files=`ls *.txt tags`; \ 1978 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1979 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1980 cd $(DEST_HELP); \ 1981 chmod $(HELPMOD) $$files 1982 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1983 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1984# install the menu files 1985 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1986 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1987 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1988 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1989 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1990 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1991# install the evim file 1992 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1993 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1994 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1995 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1996# install the bugreport file 1997 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1998 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1999# install the example vimrc files 2000 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2001 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2002 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2003 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2004# install the file type detection files 2005 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2006 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2007 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2008 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2009 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2010 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2011 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2012 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2013 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2014 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2015 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2016 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2017 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2018 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2019 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2020 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2021# install the print resource files 2022 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2023 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2024# install the colorscheme files 2025 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 2026 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 2027# install the syntax files 2028 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2029 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2030# install the indent files 2031 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2032 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2033# install the standard autoload files 2034 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2035 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2036 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2037 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2038# install the standard plugin files 2039 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2040 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2041# install the ftplugin files 2042 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2043 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2044# install the compiler files 2045 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2046 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2047 2048installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2049 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2050 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2051 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2052 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2053# When using CVS some CVS directories might have been copied. 2054# Also delete AAPDIR and *.info files. 2055 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2056 if test -n "$$cvs"; then \ 2057 rm -rf $$cvs; \ 2058 fi 2059 2060# install the tutor files 2061installtutorbin: $(DEST_VIM) 2062 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2063 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2064 2065installgtutorbin: $(DEST_VIM) 2066 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2067 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2068 2069installtutor: $(DEST_RT) $(DEST_TUTOR) 2070 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2071 -rm -f $(DEST_TUTOR)/*.info 2072 chmod $(HELPMOD) $(DEST_TUTOR)/* 2073 2074# Install the spell files, if they exist. This assumes at least the English 2075# spell file is there. 2076installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2077 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2078 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2079 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2080 fi 2081 2082# install helper program xxd 2083installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2084 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2085 $(INSTALL_TOOL_LANGS) 2086 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2087 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2088 rm -f $(DEST_BIN)/xxd.rm; \ 2089 fi 2090 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2091 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2092 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2093 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2094 2095# install the runtime tools 2096 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2097# When using CVS some CVS directories might have been copied. 2098 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2099 if test -n "$$cvs"; then \ 2100 rm -rf $$cvs; \ 2101 fi 2102 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2103# replace the path in some tools 2104 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2105 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2106 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2107 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2108 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2109 2110# install the language specific files for tools, if they were unpacked 2111install-tool-languages: 2112 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2113 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2114 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2115 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2116 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2117 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2118 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2119 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2120 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2121 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2122 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2123 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2124 2125# install the language specific files, if they were unpacked 2126install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2127 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2128 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2129 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2130 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2131 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2132 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2133 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2134 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2135 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2136 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2137 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2138 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2139 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2140 $(DEST_MAN_FR) $(INSTALLMLARGS) 2141 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2142 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2143 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2144 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2145 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2146 $(DEST_MAN_IT) $(INSTALLMLARGS) 2147 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2148 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2149 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2150 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2151 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2152 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2153 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2154 $(DEST_MAN_PL) $(INSTALLMLARGS) 2155 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2156 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2157 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2158 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2159 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2160 $(DEST_MAN_RU) $(INSTALLMLARGS) 2161 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2162 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2163 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2164 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2165 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2166 fi 2167 if test -d $(LANGSOURCE); then \ 2168 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2169 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2170 fi 2171 if test -d $(KMAPSOURCE); then \ 2172 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2173 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2174 fi 2175 2176# install the icons for KDE, if the directory exists and the icon doesn't. 2177ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2178ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2179ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2180KDEPATH = $(HOME)/.kde/share/icons 2181install-icons: 2182 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2183 -a ! -f $(ICON48PATH)/gvim.png; then \ 2184 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2185 fi 2186 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2187 -a ! -f $(ICON32PATH)/gvim.png; then \ 2188 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2189 fi 2190 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2191 -a ! -f $(ICON16PATH)/gvim.png; then \ 2192 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2193 fi 2194 2195 2196$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2197 @echo Runtime files not found. 2198 @echo You need to unpack the runtime archive before running "make install". 2199 test -f error 2200 2201$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2202 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2203 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2204 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2205 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2206 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2207 -$(SHELL) ./mkinstalldirs $@ 2208 -chmod $(DIRMOD) $@ 2209 2210# create links from various names to vim. This is only done when the links 2211# (or executables with the same name) don't exist yet. 2212installlinks: $(GUI_TARGETS) \ 2213 $(DEST_BIN)/$(EXTARGET) \ 2214 $(DEST_BIN)/$(VIEWTARGET) \ 2215 $(DEST_BIN)/$(RVIMTARGET) \ 2216 $(DEST_BIN)/$(RVIEWTARGET) \ 2217 $(INSTALLVIMDIFF) 2218 2219installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2220 $(DEST_BIN)/$(GVIEWTARGET) \ 2221 $(DEST_BIN)/$(RGVIMTARGET) \ 2222 $(DEST_BIN)/$(RGVIEWTARGET) \ 2223 $(DEST_BIN)/$(EVIMTARGET) \ 2224 $(DEST_BIN)/$(EVIEWTARGET) \ 2225 $(INSTALLGVIMDIFF) 2226 2227installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2228installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2229 2230$(DEST_BIN)/$(EXTARGET): 2231 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2232 2233$(DEST_BIN)/$(VIEWTARGET): 2234 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2235 2236$(DEST_BIN)/$(GVIMTARGET): 2237 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2238 2239$(DEST_BIN)/$(GVIEWTARGET): 2240 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2241 2242$(DEST_BIN)/$(RVIMTARGET): 2243 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2244 2245$(DEST_BIN)/$(RVIEWTARGET): 2246 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2247 2248$(DEST_BIN)/$(RGVIMTARGET): 2249 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2250 2251$(DEST_BIN)/$(RGVIEWTARGET): 2252 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2253 2254$(DEST_BIN)/$(VIMDIFFTARGET): 2255 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2256 2257$(DEST_BIN)/$(GVIMDIFFTARGET): 2258 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2259 2260$(DEST_BIN)/$(EVIMTARGET): 2261 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2262 2263$(DEST_BIN)/$(EVIEWTARGET): 2264 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2265 2266# Create links for the manual pages with various names to vim. This is only 2267# done when the links (or manpages with the same name) don't exist yet. 2268 2269INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2270 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2271 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2272 $(GVIMDIFFNAME) $(EVIEWNAME) 2273 2274installmanlinks: 2275 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2276 $(DEST_MAN) $(INSTALLMLARGS) 2277 2278uninstall: uninstall_runtime 2279 -rm -f $(DEST_BIN)/$(VIMTARGET) 2280 -rm -f $(DEST_BIN)/vimtutor 2281 -rm -f $(DEST_BIN)/gvimtutor 2282 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2283 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2284 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2285 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2286 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2287 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2288 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2289 2290# Note: the "rmdir" will fail if any files were added after "make install" 2291uninstall_runtime: 2292 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2293 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2294 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2295 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2296 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2297 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2298 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2299 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2300 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2301 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2302 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2303 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2304 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2305 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2306 $(DEST_MAN) $(INSTALLMLARGS) 2307 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2308 $(DEST_MAN_FR) $(INSTALLMLARGS) 2309 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2310 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2311 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2312 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2313 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2314 $(DEST_MAN_IT) $(INSTALLMLARGS) 2315 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2316 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2317 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2318 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2319 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2320 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2321 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2322 $(DEST_MAN_PL) $(INSTALLMLARGS) 2323 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2324 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2325 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2326 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2327 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2328 $(DEST_MAN_RU) $(INSTALLMLARGS) 2329 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2330 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2331 -rm -f $(DEST_MAN)/xxd.1 2332 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2333 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2334 -rm -f $(DEST_MAN_JA_U)/xxd.1 2335 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2336 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2337 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2338 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2339 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2340 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2341 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2342 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2343 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2344 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2345 -rm -f $(SYS_OPTWIN_FILE) 2346 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2347 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2348 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2349 -rm -rf $(DEST_MACRO) 2350 -rm -rf $(DEST_TUTOR) 2351 -rm -rf $(DEST_SPELL) 2352 -rm -rf $(DEST_TOOLS) 2353 -rm -rf $(DEST_LANG) 2354 -rm -rf $(DEST_KMAP) 2355 -rm -rf $(DEST_COMP) 2356 -rm -f $(DEST_PRINT)/*.ps 2357 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2358 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2359 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2360 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2361 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2362# This will fail when other Vim versions are installed, no worries. 2363 -rmdir $(DEST_VIM) 2364 2365# Clean up all the files that have been produced, except configure's. 2366# We support common typing mistakes for Juergen! :-) 2367clean celan: testclean 2368 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2369 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2370 -rm -f conftest* *~ auto/link.sed 2371 -rm -f $(UNITTEST_TARGETS) 2372 -rm -f runtime pixmaps 2373 -rm -rf $(APPDIR) 2374 -rm -rf mzscheme_base.c 2375 if test -d $(PODIR); then \ 2376 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2377 fi 2378 2379# Make a shadow directory for compilation on another system or with different 2380# features. 2381SHADOWDIR = shadow 2382 2383shadow: runtime pixmaps 2384 mkdir $(SHADOWDIR) 2385 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../gvimtutor ../mkinstalldirs . 2386 mkdir $(SHADOWDIR)/auto 2387 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2388 mkdir $(SHADOWDIR)/po 2389 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/Makefile . 2390 cd $(SHADOWDIR); rm -f auto/link.sed 2391 cp Makefile configure $(SHADOWDIR) 2392 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2393 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2394 cp config.mk.dist $(SHADOWDIR) 2395 mkdir $(SHADOWDIR)/xxd 2396 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2397 if test -d $(RSRC_DIR); then \ 2398 cd $(SHADOWDIR); \ 2399 ln -s ../infplist.xml .; \ 2400 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2401 fi 2402 mkdir $(SHADOWDIR)/testdir 2403 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2404 ../../testdir/vimrc.unix \ 2405 ../../testdir/*.in \ 2406 ../../testdir/*.vim \ 2407 ../../testdir/python* \ 2408 ../../testdir/sautest \ 2409 ../../testdir/test83-tags? \ 2410 ../../testdir/*.ok . 2411 2412# Link needed for doing "make install" in a shadow directory. 2413runtime: 2414 -ln -s ../runtime . 2415 2416# Link needed for doing "make" using GTK in a shadow directory. 2417pixmaps: 2418 -ln -s ../pixmaps . 2419 2420# Update the synmenu.vim file with the latest Syntax menu. 2421# This is only needed when runtime/makemenu.vim was changed. 2422menu: ./vim ../runtime/makemenu.vim 2423 ./vim -u ../runtime/makemenu.vim 2424 2425# Start configure from scratch 2426scrub scratch: 2427 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2428 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2429 touch auto/config.h 2430 cp config.mk.dist auto/config.mk 2431 2432distclean: clean scratch 2433 -rm -f tags 2434 2435dist: distclean 2436 @echo 2437 @echo Making the distribution has to be done in the top directory 2438 2439mdepend: 2440 -@rm -f Makefile~ 2441 cp Makefile Makefile~ 2442 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2443 @for i in $(ALL_SRC) ; do \ 2444 echo "$$i" ; \ 2445 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2446 $(CPP) $$i |\ 2447 grep '^# .*"\./.*\.h"' |\ 2448 sort -t'"' -u +1 -2 |\ 2449 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2450 ` >> tmp_make ; \ 2451 done 2452 mv tmp_make Makefile 2453 2454depend: 2455 -@rm -f Makefile~ 2456 cp Makefile Makefile~ 2457 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2458 -for i in $(ALL_SRC); do echo $$i; \ 2459 $(CPP_DEPEND) $$i | \ 2460 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2461 mv tmp_make Makefile 2462 2463# Run lint. Clean up the *.ln files that are sometimes left behind. 2464lint: 2465 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2466 -rm -f *.ln 2467 2468# Check dosinst.c with lint. 2469lintinstall: 2470 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2471 -rm -f dosinst.ln 2472 2473########################################################################### 2474 2475.c.o: 2476 $(CCC) $< 2477 2478auto/if_perl.c: if_perl.xs 2479 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2480 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2481 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2482 2483auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2484 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2485 2486auto/pathdef.c: Makefile auto/config.mk 2487 -@echo creating $@ 2488 -@echo '/* pathdef.c */' > $@ 2489 -@echo '/* This file is automatically created by Makefile' >> $@ 2490 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2491 -@echo '#include "vim.h"' >> $@ 2492 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2493 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2494 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2495 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2496 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2497 -@if test -n "$(COMPILEDBY)"; then \ 2498 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2499 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2500 -@echo '";' >> $@ 2501 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2502 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2503 -@echo '";' >> $@ 2504 -@sh $(srcdir)/pathdef.sh 2505 2506# All the object files are put in the "objects" directory. Since not all make 2507# commands understand putting object files in another directory, it must be 2508# specified for each file separately. 2509 2510objects: 2511 mkdir objects 2512 2513objects/blowfish.o: blowfish.c 2514 $(CCC) -o $@ blowfish.c 2515 2516objects/buffer.o: buffer.c 2517 $(CCC) -o $@ buffer.c 2518 2519objects/charset.o: charset.c 2520 $(CCC) -o $@ charset.c 2521 2522objects/crypt.o: crypt.c 2523 $(CCC) -o $@ crypt.c 2524 2525objects/crypt_zip.o: crypt_zip.c 2526 $(CCC) -o $@ crypt_zip.c 2527 2528objects/diff.o: diff.c 2529 $(CCC) -o $@ diff.c 2530 2531objects/digraph.o: digraph.c 2532 $(CCC) -o $@ digraph.c 2533 2534objects/edit.o: edit.c 2535 $(CCC) -o $@ edit.c 2536 2537objects/eval.o: eval.c 2538 $(CCC) -o $@ eval.c 2539 2540objects/ex_cmds.o: ex_cmds.c 2541 $(CCC) -o $@ ex_cmds.c 2542 2543objects/ex_cmds2.o: ex_cmds2.c 2544 $(CCC) -o $@ ex_cmds2.c 2545 2546objects/ex_docmd.o: ex_docmd.c 2547 $(CCC) -o $@ ex_docmd.c 2548 2549objects/ex_eval.o: ex_eval.c 2550 $(CCC) -o $@ ex_eval.c 2551 2552objects/ex_getln.o: ex_getln.c 2553 $(CCC) -o $@ ex_getln.c 2554 2555objects/fileio.o: fileio.c 2556 $(CCC) -o $@ fileio.c 2557 2558objects/fold.o: fold.c 2559 $(CCC) -o $@ fold.c 2560 2561objects/getchar.o: getchar.c 2562 $(CCC) -o $@ getchar.c 2563 2564objects/hardcopy.o: hardcopy.c 2565 $(CCC) -o $@ hardcopy.c 2566 2567objects/hashtab.o: hashtab.c 2568 $(CCC) -o $@ hashtab.c 2569 2570objects/gui.o: gui.c 2571 $(CCC) -o $@ gui.c 2572 2573objects/gui_at_fs.o: gui_at_fs.c 2574 $(CCC) -o $@ gui_at_fs.c 2575 2576objects/gui_at_sb.o: gui_at_sb.c 2577 $(CCC) -o $@ gui_at_sb.c 2578 2579objects/gui_athena.o: gui_athena.c 2580 $(CCC) -o $@ gui_athena.c 2581 2582objects/gui_beval.o: gui_beval.c 2583 $(CCC) -o $@ gui_beval.c 2584 2585objects/gui_gtk.o: gui_gtk.c 2586 $(CCC) -o $@ gui_gtk.c 2587 2588objects/gui_gtk_f.o: gui_gtk_f.c 2589 $(CCC) -o $@ gui_gtk_f.c 2590 2591objects/gui_gtk_x11.o: gui_gtk_x11.c 2592 $(CCC) -o $@ gui_gtk_x11.c 2593 2594objects/gui_motif.o: gui_motif.c 2595 $(CCC) -o $@ gui_motif.c 2596 2597objects/gui_xmdlg.o: gui_xmdlg.c 2598 $(CCC) -o $@ gui_xmdlg.c 2599 2600objects/gui_xmebw.o: gui_xmebw.c 2601 $(CCC) -o $@ gui_xmebw.c 2602 2603objects/gui_x11.o: gui_x11.c 2604 $(CCC) -o $@ gui_x11.c 2605 2606objects/gui_photon.o: gui_photon.c 2607 $(CCC) -o $@ gui_photon.c 2608 2609objects/gui_mac.o: gui_mac.c 2610 $(CCC) -o $@ gui_mac.c 2611 2612objects/hangulin.o: hangulin.c 2613 $(CCC) -o $@ hangulin.c 2614 2615objects/if_cscope.o: if_cscope.c 2616 $(CCC) -o $@ if_cscope.c 2617 2618objects/if_xcmdsrv.o: if_xcmdsrv.c 2619 $(CCC) -o $@ if_xcmdsrv.c 2620 2621objects/if_lua.o: if_lua.c 2622 $(CCC) $(LUA_CFLAGS) -o $@ if_lua.c 2623 2624objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2625 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2626 2627mzscheme_base.c: 2628 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2629 2630objects/if_perl.o: auto/if_perl.c 2631 $(CCC) $(PERL_CFLAGS) -o $@ auto/if_perl.c 2632 2633objects/if_perlsfio.o: if_perlsfio.c 2634 $(CCC) $(PERL_CFLAGS) -o $@ if_perlsfio.c 2635 2636objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2637 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2638 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2639 $(PYTHON_GETPATH_CFLAGS) 2640 2641objects/if_python.o: if_python.c if_py_both.h 2642 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2643 2644objects/if_python3.o: if_python3.c if_py_both.h 2645 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2646 2647objects/if_ruby.o: if_ruby.c 2648 $(CCC) $(RUBY_CFLAGS) -o $@ if_ruby.c 2649 2650objects/if_sniff.o: if_sniff.c 2651 $(CCC) -o $@ if_sniff.c 2652 2653objects/if_tcl.o: if_tcl.c 2654 $(CCC) -o $@ if_tcl.c 2655 2656objects/integration.o: integration.c 2657 $(CCC) -o $@ integration.c 2658 2659objects/main.o: main.c 2660 $(CCC) -o $@ main.c 2661 2662objects/mark.o: mark.c 2663 $(CCC) -o $@ mark.c 2664 2665objects/memfile.o: memfile.c 2666 $(CCC) -o $@ memfile.c 2667 2668objects/memfile_test.o: memfile_test.c 2669 $(CCC) -o $@ memfile_test.c 2670 2671objects/memline.o: memline.c 2672 $(CCC) -o $@ memline.c 2673 2674objects/menu.o: menu.c 2675 $(CCC) -o $@ menu.c 2676 2677objects/message.o: message.c 2678 $(CCC) -o $@ message.c 2679 2680objects/misc1.o: misc1.c 2681 $(CCC) -o $@ misc1.c 2682 2683objects/misc2.o: misc2.c 2684 $(CCC) -o $@ misc2.c 2685 2686objects/move.o: move.c 2687 $(CCC) -o $@ move.c 2688 2689objects/mbyte.o: mbyte.c 2690 $(CCC) -o $@ mbyte.c 2691 2692objects/normal.o: normal.c 2693 $(CCC) -o $@ normal.c 2694 2695objects/ops.o: ops.c 2696 $(CCC) -o $@ ops.c 2697 2698objects/option.o: option.c 2699 $(CCC) -o $@ option.c 2700 2701objects/os_beos.o: os_beos.c 2702 $(CCC) -o $@ os_beos.c 2703 2704objects/os_qnx.o: os_qnx.c 2705 $(CCC) -o $@ os_qnx.c 2706 2707objects/os_macosx.o: os_macosx.m 2708 $(CCC) -o $@ os_macosx.m 2709 2710objects/os_mac_conv.o: os_mac_conv.c 2711 $(CCC) -o $@ os_mac_conv.c 2712 2713objects/os_unix.o: os_unix.c 2714 $(CCC) -o $@ os_unix.c 2715 2716objects/os_mswin.o: os_mswin.c 2717 $(CCC) -o $@ os_mswin.c 2718 2719objects/winclip.o: winclip.c 2720 $(CCC) -o $@ winclip.c 2721 2722objects/pathdef.o: auto/pathdef.c 2723 $(CCC) -o $@ auto/pathdef.c 2724 2725objects/pty.o: pty.c 2726 $(CCC) -o $@ pty.c 2727 2728objects/popupmnu.o: popupmnu.c 2729 $(CCC) -o $@ popupmnu.c 2730 2731objects/quickfix.o: quickfix.c 2732 $(CCC) -o $@ quickfix.c 2733 2734objects/regexp.o: regexp.c regexp_nfa.c 2735 $(CCC) -o $@ regexp.c 2736 2737objects/screen.o: screen.c 2738 $(CCC) -o $@ screen.c 2739 2740objects/search.o: search.c 2741 $(CCC) -o $@ search.c 2742 2743objects/sha256.o: sha256.c 2744 $(CCC) -o $@ sha256.c 2745 2746objects/spell.o: spell.c 2747 $(CCC) -o $@ spell.c 2748 2749objects/syntax.o: syntax.c 2750 $(CCC) -o $@ syntax.c 2751 2752objects/tag.o: tag.c 2753 $(CCC) -o $@ tag.c 2754 2755objects/term.o: term.c 2756 $(CCC) -o $@ term.c 2757 2758objects/ui.o: ui.c 2759 $(CCC) -o $@ ui.c 2760 2761objects/undo.o: undo.c 2762 $(CCC) -o $@ undo.c 2763 2764objects/window.o: window.c 2765 $(CCC) -o $@ window.c 2766 2767objects/workshop.o: workshop.c 2768 $(CCC) -o $@ workshop.c 2769 2770objects/wsdebug.o: wsdebug.c 2771 $(CCC) -o $@ wsdebug.c 2772 2773objects/netbeans.o: netbeans.c 2774 $(CCC) -o $@ netbeans.c 2775 2776Makefile: 2777 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2778 2779############################################################################### 2780### MacOS X installation 2781### 2782### This installs a runnable Vim.app in $(prefix) 2783 2784REZ = /Developer/Tools/Rez 2785RESDIR = $(APPDIR)/Contents/Resources 2786VERSION = $(VIMMAJOR).$(VIMMINOR) 2787 2788### Common flags 2789M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2790 -DAPP_VER=$(VERSION) 2791 2792install_macosx: gui_bundle 2793# Remove the link to the runtime dir, don't want to copy all of that. 2794 -rm $(RESDIR)/vim/runtime 2795 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2796# Generate the help tags file now, it won't work with "make installruntime". 2797 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2798# Install the runtime files. Recursive! 2799 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2800# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2801 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2802 VIMEXE=$$srcdir/$(VIMTARGET) \ 2803 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2804 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2805 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2806 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2807 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2808# Put the link back. 2809 ln -s `pwd`/../runtime $(RESDIR)/vim 2810# Copy rgb.txt, Mac doesn't always have X11 2811 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2812# TODO: Create the vimtutor and/or gvimtutor application. 2813 2814gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2815 bundle-language 2816 2817$(RESDIR): 2818 mkdir -p $@ 2819 2820bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2821# Make a link to the runtime directory, so that we can try out the executable 2822# without installing it. 2823 mkdir -p $(RESDIR)/vim 2824 -ln -s `pwd`/../runtime $(RESDIR)/vim 2825 2826bundle-executable: $(VIMTARGET) 2827 mkdir -p $(APPDIR)/Contents/MacOS 2828 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2829 2830bundle-info: bundle-dir 2831 @echo "Creating PkgInfo" 2832 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2833 @echo "Creating Info.plist" 2834 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2835 2836bundle-resource: bundle-dir bundle-rsrc 2837 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2838 2839### Classic resources 2840# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2841# This file is also required for OS X Vim. 2842bundle-rsrc: os_mac.rsr.hqx 2843 @echo "Creating resource fork" 2844 python dehqx.py $< 2845 rm -f gui_mac.rsrc 2846 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2847 2848# po/Make_osx.pl says something about generating a Mac message file 2849# for Ukrainian. Would somebody using Mac OS X in Ukrainian 2850# *really* be upset that Carbon Vim was not localised in 2851# Ukrainian? 2852# 2853#bundle-language: bundle-dir po/Make_osx.pl 2854# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2855bundle-language: bundle-dir 2856 2857$(APPDIR)/Contents: 2858 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2859 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2860 2861 2862############################################################################### 2863### (automatically generated by 'make depend') 2864### Dependencies: 2865objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 2866 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2867 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2868 globals.h farsi.h arabic.h 2869objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2870 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2871 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2872 arabic.h version.h 2873objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2874 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2875 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2876 arabic.h 2877objects/crypt.o: crypt.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2878 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2879 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2880 arabic.h 2881objects/crypt_zip.o: crypt_zip.c vim.h auto/config.h feature.h os_unix.h \ 2882 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2883 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2884 globals.h farsi.h arabic.h 2885objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2886 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2887 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2888 arabic.h 2889objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2890 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2891 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2892 arabic.h 2893objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2894 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2895 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2896 arabic.h 2897objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2898 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2899 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2900 arabic.h version.h 2901objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2902 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2903 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2904 arabic.h version.h 2905objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2906 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2907 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2908 globals.h farsi.h arabic.h version.h 2909objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2910 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2911 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2912 globals.h farsi.h arabic.h 2913objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2914 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2915 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2916 arabic.h 2917objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2918 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2919 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2920 globals.h farsi.h arabic.h 2921objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2922 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2923 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2924 arabic.h 2925objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2926 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2927 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2928 arabic.h 2929objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2930 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2931 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2932 arabic.h 2933objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2934 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2935 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2936 globals.h farsi.h arabic.h version.h 2937objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2938 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2939 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2940 arabic.h 2941objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2942 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2943 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2944 globals.h farsi.h arabic.h if_cscope.h 2945objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2946 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2947 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2948 globals.h farsi.h arabic.h version.h 2949objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2950 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2951 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2952 arabic.h farsi.c arabic.c 2953objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2954 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2955 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2956 arabic.h 2957objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2958 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2959 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2960 arabic.h 2961objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2962 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2963 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2964 arabic.h 2965objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2966 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2967 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2968 arabic.h 2969objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2970 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2971 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2972 arabic.h 2973objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2974 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2975 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2976 arabic.h version.h 2977objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2978 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2979 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2980 arabic.h 2981objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2982 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2983 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2984 arabic.h 2985objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2986 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2987 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2988 arabic.h 2989objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2990 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2991 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2992 arabic.h 2993objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2994 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2995 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2996objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2997 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2998 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2999 arabic.h 3000objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3001 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3002 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3003 arabic.h if_mzsch.h os_unixx.h 3004objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 3005 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3006 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3007 globals.h farsi.h arabic.h 3008objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 3009 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3010 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3011 globals.h farsi.h arabic.h 3012objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 3013 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3014 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3015 globals.h farsi.h arabic.h 3016objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3017 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3018 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3019 arabic.h regexp_nfa.c 3020objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3021 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3022 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3023 arabic.h 3024objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3025 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3026 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3027 arabic.h 3028objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3029 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3030 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3031 arabic.h 3032objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3033 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3034 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3035 arabic.h 3036objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3037 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3038 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3039 arabic.h 3040objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3041 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3042 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3043objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3044 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3045 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3046 arabic.h 3047objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3048 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3049 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3050objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3051 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3052 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3053 arabic.h 3054objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3055 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3056 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3057 arabic.h version.h 3058objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3059 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3060 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3061 arabic.h 3062objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3063 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3064 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3065objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 3066 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3067 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3068 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 3069objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 3070 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3071 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3072 globals.h farsi.h arabic.h gui_gtk_f.h 3073objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 3074 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3075 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3076 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3077 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3078 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3079 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3080 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3081 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3082 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3083 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3084 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3085 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3086 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3087 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3088 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3089 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3090 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3091 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3092 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3093 ../pixmaps/tb_minwidth.xpm 3094objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 3095 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3096 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3097 globals.h farsi.h arabic.h 3098objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 3099 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3100 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3101 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3102objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 3103 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3104 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3105 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3106 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3107 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3108 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3109 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3110 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3111 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3112 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3113 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3114 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3115 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3116 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3117 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3118 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3119 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3120 ../pixmaps/tb_minwidth.xpm 3121objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 3122 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3123 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3124 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 3125 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3126objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3127 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3128 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3129 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3130 ../runtime/vim48x48.xpm 3131objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 3132 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3133 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3134 globals.h farsi.h arabic.h gui_at_sb.h 3135objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 3136 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3137 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3138 globals.h farsi.h arabic.h gui_at_sb.h 3139objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 3140 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 3141 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 3142objects/memfile_test.o: memfile_test.c main.c vim.h auto/config.h feature.h \ 3143 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3144 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3145 proto.h globals.h farsi.h arabic.h farsi.c arabic.c memfile.c 3146objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3147 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3148 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3149 globals.h farsi.h arabic.h 3150objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3151 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3152 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3153 arabic.h 3154objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3155 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3156 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3157 globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3158objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3159 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3160 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3161 globals.h farsi.h arabic.h 3162objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3163 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3164 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3165 globals.h farsi.h arabic.h 3166objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3167 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3168 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3169 globals.h farsi.h arabic.h if_py_both.h 3170objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3171 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3172 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3173 globals.h farsi.h arabic.h if_py_both.h 3174objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3175 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3176 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3177 arabic.h 3178objects/if_ruby.o: if_ruby.c auto/config.h vim.h feature.h os_unix.h auto/osdef.h \ 3179 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3180 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3181 arabic.h version.h 3182objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3183 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3184 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3185 globals.h farsi.h arabic.h os_unixx.h 3186objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3187 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3188 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3189 globals.h farsi.h arabic.h 3190objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3191 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3192 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3193 proto.h globals.h farsi.h arabic.h version.h workshop.h 3194objects/wsdebug.o: wsdebug.c 3195objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3196 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3197 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3198 globals.h farsi.h arabic.h integration.h 3199objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3200 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3201 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3202 globals.h farsi.h arabic.h version.h 3203
