1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples you can uncomment: 321#CONF_ARGS1 = --exec-prefix=/usr 322#CONF_ARGS2 = --with-vim-name=vim8 --with-ex-name=ex8 --with-view-name=view8 323#CONF_ARGS3 = --with-global-runtime=/etc/vim,/usr/share/vim 324#CONF_ARGS4 = --with-local-dir=/usr/share 325#CONF_ARGS5 = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS6 = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406# This requires at least "normal" features, "tiny" and "small" don't work. 407#CONF_OPT_LUA = --enable-luainterp 408#CONF_OPT_LUA = --enable-luainterp=dynamic 409#CONF_OPT_LUA = --enable-luainterp --with-luajit 410#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 411# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 412#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 413 414# MZSCHEME 415# Uncomment this when you want to include the MzScheme interface. 416# NOTE: does not work well together with valgrind. 417#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 418# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 420#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 421#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 422 423# PERL 424# Uncomment one of these when you want to include the Perl interface. 425# First one is for static linking, second one for dynamic loading. 426# The Perl option sometimes causes problems, because it adds extra flags 427# 428# to the command line. If you see strange flags during compilation, check in 429# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 430# the next line. 431# When you get an error for a missing "perl.exp" file, try creating an empty 432# one: "touch perl.exp". 433# This requires at least "normal" features, "tiny" and "small" don't work. 434#CONF_OPT_PERL = --enable-perlinterp 435#CONF_OPT_PERL = --enable-perlinterp=dynamic 436 437# PYTHON 438# Uncomment lines here when you want to include the Python interface. 439# This requires at least "normal" features, "tiny" and "small" don't work. 440# NOTE: This may cause threading to be enabled, which has side effects (such 441# as using different libraries and debugging becomes more difficult). 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7 450#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 451#CONF_OPT_PYTHON3 = --enable-python3interp 452#CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6 453#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 454 455# RUBY 456# Uncomment this when you want to include the Ruby interface. 457# First one for static linking, second one for loading when used. 458# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 459# This requires at least "normal" features, "tiny" and "small" don't work. 460#CONF_OPT_RUBY = --enable-rubyinterp 461#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 462#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 463 464# TCL 465# Uncomment this when you want to include the Tcl interface. 466# First one is for static linking, second one for dynamic loading. 467#CONF_OPT_TCL = --enable-tclinterp 468#CONF_OPT_TCL = --enable-tclinterp=dynamic 469#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 470 471# CSCOPE 472# Uncomment this when you want to include the Cscope interface. 473#CONF_OPT_CSCOPE = --enable-cscope 474 475# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 476#CONF_OPT_WORKSHOP = --enable-workshop 477 478# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 479# Motif version must have XPM libraries (see |workshop-xpm|). 480# Uncomment this when you do not want the netbeans interface. 481#CONF_OPT_NETBEANS = --disable-netbeans 482 483# CHANNEL - inter process communication. Same conditions as NetBeans. 484# Uncomment this when you do not want inter process communication. 485#CONF_OPT_CHANNEL = --disable-channel 486 487# TERMINAL - Terminal emulator support, :terminal command. Requires the 488# channel feature. The default is enable for when using "huge" features. 489# Uncomment the first line when you want terminal emulator support for 490# not-huge builds. Uncomment the second line when you don't want terminal 491# emulator support in the huge build. 492#CONF_OPT_TERMINAL = --enable-terminal 493#CONF_OPT_TERMINAL = --disable-terminal 494 495# MULTIBYTE - To edit multi-byte characters. 496# This is now always enabled. 497 498# When building with at least "big" features, right-left, Arabic and Farsi 499# features are enabled. Use this to disable them. 500#CONF_OPT_MULTIBYTE = --disable-rightleft --disable-farsi --disable-arabic 501 502# NLS - National Language Support 503# Uncomment this when you do not want to support translated messages, even 504# though configure can find support for it. 505#CONF_OPT_NLS = --disable-nls 506 507# XIM - X Input Method. Special character input support for X11 (Chinese, 508# Japanese, special symbols, etc). Also needed for dead-key support. 509# When omitted it's automatically enabled for the X-windows GUI. 510# HANGUL - Input Hangul (Korean) language using internal routines. 511# Uncomment one of these when you want to input a multibyte language. 512#CONF_OPT_INPUT = --enable-xim 513#CONF_OPT_INPUT = --disable-xim 514#CONF_OPT_INPUT = --enable-hangulinput 515 516# FONTSET - X fontset support for output of languages with many characters. 517# Uncomment this when you want to output a multibyte language. 518#CONF_OPT_OUTPUT = --enable-fontset 519 520# ACL - Uncomment this when you do not want to include ACL support, even 521# though your system does support it. E.g., when it's buggy. 522#CONF_OPT_ACL = --disable-acl 523 524# gpm - For mouse support on Linux console via gpm 525# Uncomment this when you do not want to include gpm support, even 526# though you have gpm libraries and includes. 527#CONF_OPT_GPM = --disable-gpm 528 529# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 530# Uncomment this when you do not want do include sysmouse support, even 531# though you have /dev/sysmouse and includes. 532#CONF_OPT_SYSMOUSE = --disable-sysmouse 533 534# FEATURES - For creating Vim with more or less features 535# Uncomment one of these lines when you want to include few to many features. 536# The default is "huge" for most systems. 537#CONF_OPT_FEAT = --with-features=tiny 538#CONF_OPT_FEAT = --with-features=small 539#CONF_OPT_FEAT = --with-features=normal 540#CONF_OPT_FEAT = --with-features=big 541#CONF_OPT_FEAT = --with-features=huge 542 543# COMPILED BY - For including a specific e-mail address for ":version". 544#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 545 546# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 547# (otherwise Vim configure will try to include xterm titlebar access) 548# Also disable the GUI above, otherwise it will be included anyway. 549# When both GUI and X11 have been disabled this may save about 15% of the 550# code and make Vim startup quicker. 551#CONF_OPT_X = --without-x 552 553# X WINDOWS DIRECTORY - specify X directories 554# If configure can't find you X stuff, or if you have multiple X11 derivatives 555# installed, you may wish to specify which one to use. 556# Select nothing to let configure choose. 557# This here selects openwin (as found on sun). 558#XROOT = /usr/openwin 559#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 560 561# X11 Session Management Protocol support 562# Vim will try to use XSMP to catch the user logging out if there are unsaved 563# files. Uncomment this line to disable that (it prevents vim trying to open 564# communications with the session manager). 565#CONF_OPT_XSMP = --disable-xsmp 566 567# You may wish to include xsmp but use exclude xsmp-interact if the logout 568# XSMP functionality does not work well with your session-manager (at time of 569# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 570# applications after Vim has cancelled a logout (until Vim quits). This 571# *might* be the Vim code, but is more likely a bug in early GNOME-1. 572# This disables the dialog that asks you if you want to save files or not. 573#CONF_OPT_XSMP = --disable-xsmp-interact 574 575# If you want to always automatically add a servername, also in the terminal. 576#CONF_OPT_AUTOSERVE = --enable-autoservername 577 578# COMPILER - Name of the compiler {{{1 579# The default from configure will mostly be fine, no need to change this, just 580# an example. If a compiler is defined here, configure will use it rather than 581# probing for one. It is dangerous to change this after configure was run. 582# Make will use your choice then -- but beware: Many things may change with 583# another compiler. It is wise to run 'make reconfig' to start all over 584# again. 585#CC = cc 586#CC = gcc 587#CC = clang 588 589# COMPILER FLAGS - change as you please. Either before running {{{1 590# configure or afterwards. For examples see below. 591# When using -g with some older versions of Linux you might get a 592# statically linked executable. 593# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 594#CFLAGS = -g 595#CFLAGS = -O 596 597# Optimization limits - depends on the compiler. Automatic check in configure 598# doesn't work very well, because many compilers only give a warning for 599# unrecognized arguments. 600#CFLAGS = -O -OPT:Olimit=2600 601#CFLAGS = -O -Olimit 2000 602#CFLAGS = -O -FOlimit,2000 603 604# Often used for GCC: mixed optimizing, lot of optimizing, debugging 605#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 606#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 607#CFLAGS = -g -Wall -Wmissing-prototypes 608#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 609#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 610#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 611 612# Use this with GCC to check for mistakes, unused arguments, etc. 613#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 614# Add -Wpedantic to find // comments and other C99 constructs. 615# Better disable Perl and Python to avoid a lot of warnings. 616#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 617#CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 618#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 619#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 620 621# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 622# allocated memory (and makes every malloc()/free() very slow). 623# Electric Fence is free (search ftp sites). 624# You may want to set the EF_PROTECT_BELOW environment variable to check the 625# other side of allocated memory. 626# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 627# as root: sysctl -w vm.max_proc_mmap=30000 628#EXTRA_LIBS = /usr/local/lib/libefence.a 629 630# Autoconf binary. 631AUTOCONF = autoconf 632 633# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 634#PURIFY = purify 635 636# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 637# Used for the unittest targets. 638# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 639 640# NBDEBUG - debugging the netbeans interface. 641#EXTRA_DEFS = -DNBDEBUG 642 643# }}} 644 645# LINT - for running lint 646# For standard Unix lint 647LINT = lint 648LINT_OPTIONS = -beprxzF 649# For splint 650# It doesn't work well, crashes on include files and non-ascii characters. 651#LINT = splint 652#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 653 654# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 655# Might not work with GUI or Perl. 656# After running Vim see the profile result with: gprof vim gmon.out | vim - 657# Need to recompile everything after changing this: "make clean" "make". 658#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 659#PROFILE_LIBS = -pg 660 661# GCC 5 and later need the -no-pie argument. 662#PROFILE_LIBS = -pg -no-pie 663 664# For unknown reasons adding "-lc" fixes a linking problem with some versions 665# of GCC. That's probably a bug in the "-pg" implementation. 666#PROFILE_LIBS = -pg -lc 667 668 669# TEST COVERAGE - Uncomment the two lines below the explanation to get code 670# coverage information. (provided by Yegappan Lakshmanan) 671# 1. make clean, run configure and build Vim as usual. 672# 2. Generate the baseline code coverage information: 673# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 674# 3. Run "make test" to run the unit tests. The code coverage information will 675# be generated in the src/objects directory. 676# 4. Generate the code coverage information from the tests: 677# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 678# 5. Combine the baseline and test code coverage data: 679# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 680# 6. Process the test coverage data and generate a report in html: 681# $ genhtml objects/coverage_total.info -o objects 682# 7. Open the objects/index.html file in a web browser to view the coverage 683# information. 684# 685# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 686# LDFLAGS=--coverage 687 688 689# Uncomment one of the next two lines to compile Vim with the 690# address sanitizer or with the undefined sanitizer. Works with gcc and 691# clang. May make Vim twice as slow. Errors reported on stderr. 692# More at: https://code.google.com/p/address-sanitizer/ 693#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 694#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 695SANITIZER_LIBS = $(SANITIZER_CFLAGS) 696 697# MEMORY LEAK DETECTION 698# Requires installing the ccmalloc library. 699# Configuration is in the .ccmalloc or ~/.ccmalloc file. 700# Doesn't work very well, since memory linked to from global variables 701# (in libraries) is also marked as leaked memory. 702#LEAK_CFLAGS = -DEXITFREE 703#LEAK_LIBS = -lccmalloc 704 705# Uncomment this line to have Vim call abort() when an internal error is 706# detected. Useful when using a tool to find errors. 707#ABORT_CLFAGS = -DABORT_ON_INTERNAL_ERROR 708 709##################################################### 710### Specific systems, check if yours is listed! ### {{{ 711##################################################### 712 713### Uncomment things here only if the values chosen by configure are wrong. 714### It's better to adjust configure.ac and "make autoconf", if you can! 715### Then send the required changes to configure.ac to the bugs list. 716 717### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 718### 719#CC = shlicc2 720#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 721 722### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 723### The first probably works on all systems 724### The second should work a bit better on newer systems 725### The third should work a bit better on HPUX 11.11 726### Information provided by: Richard Allen <[email protected]> 727#CC = c89 -D_HPUX_SOURCE 728#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 729#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 730 731### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 732### when the default (ISO) digraphs look completely wrong. 733### After changing this do "touch digraph.c; make". 734#EXTRA_DEFS = -DHPUX_DIGRAPHS 735 736### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 737### is too small to compile many routines. It produces too much defining 738### and no space errors. 739### Uncomment the following to specify a larger macro definition table. 740#CFLAGS = -Wp,-H256000 741 742### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 743### libraries in /usr/lib instead of /lib (avoiding transition links). 744### Information provided by: David Green 745#XROOT = /usr 746#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 747#GUI_INC_LOC = -I/usr/include/Motif1.2 748#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 749 750### (5) AIX 4.1.4 with cc 751#CFLAGS = -O -qmaxmem=8192 752 753### AIX with c89 (Walter Briscoe) 754#CC = c89 755#CPPFLAGS = -D_ALL_SOURCE 756 757### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 758# needed to avoid a problem where strings.h gets included 759#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 760 761### (W) Solaris with multi-threaded libraries (-lthread): 762### If suspending doesn't work properly, try using this line: 763#EXTRA_DEFS = -D_REENTRANT 764 765### (7) Solaris 2.4/2.5 with Centerline compiler 766#CC = clcc 767#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 768#CFLAGS = -O 769 770### (9) Solaris 2.x with cc (SunPro), using Athena. 771### Only required for compiling gui_at_sb.c. 772### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 773### Use one of the lines (either Full ANSI or no ANSI at all) 774#CFLAGS = $(CFLAGS) -Xc 775#CFLAGS = $(CFLAGS) -Xs 776 777### Solaris 2.3 with X11 and specific cc 778#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 779 780### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 781#CC = /usr/ucb/cc 782#EXTRA_LIBS = -R/usr/ucblib 783 784### Solaris with Forte Developer and NetBeans. 785# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 786#CC = cc 787#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 788#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 789#XPM_IPATH = -I$(XPM_DIR)/include 790#EXTRA_LIBS = $(XPM_LIB) 791#EXTRA_IPATHS = $(XPM_IPATH) 792#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 793 794### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 795#LDFLAGS = -lw -ldl -lXmu 796#GUI_LIB_LOC = -L/usr/local/lib 797 798### (8) Unisys 6035 (Glauber Ribeiro) 799#EXTRA_LIBS = -lnsl -lsocket -lgen 800 801### When builtin functions cause problems with gcc (for Sun 4.1.x) 802#CFLAGS = -O2 -Wall -traditional -Wno-implicit 803 804### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 805#EXTRA_DEFS = -DDOMAIN 806#CFLAGS= -O -A systype,bsd4.3 807 808### Coherent 4.2.10 on Intel 386 platform 809#EXTRA_DEFS = -Dvoid=int 810#EXTRA_LIBS = -lterm -lsocket 811 812### SCO 3.2, with different library name for terminfo 813#EXTRA_LIBS = -ltinfo 814 815### UTS2 for Amdahl UTS 2.1.x 816#EXTRA_DEFS = -DUTS2 817#EXTRA_LIBS = -lsocket 818 819### UTS4 for Amdahl UTS 4.x 820#EXTRA_DEFS = -DUTS4 -Xa 821 822### USL for Unix Systems Laboratories (SYSV 4.2) 823#EXTRA_DEFS = -DUSL 824 825### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 826#CC= gcc -D_POSIX_SOURCE 827#CFLAGS= -O2 828#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 829 830### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 831### Also use the CONF_TERM_LIB below! 832#EXTRA_LIBS = -lgen 833 834### (D) QNX (by G.F. Desrochers) 835#CFLAGS = -g -O -mf -4 836 837### (F) QNX (by John Oleynick) 838# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 839# CONF_OPT_X = --without-x. 840# 2. make config 841# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 842# have -ldir (does config find it somewhere?) and -ltermcap has at 843# least one problem so I use termlib.o instead. The problem with 844# termcap is that it segfaults if you call it with the name of 845# a non-existent terminal type. 846# 4. edit auto/config.h and add #define USE_TMPNAM 847# 5. add termlib.o to OBJ 848# 6. make 849 850### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 851#EXTRA_LIBS = -lgen 852 853### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 854#EXTRA_LIBS = -lgen -lnsl 855### For SINIX-Y this is needed for the right prototype of gettimeofday() 856#EXTRA_DEFS = -D_XPG_IV 857 858### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 859# Use both "-F O3" lines for optimization or the "-g" line for debugging 860#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 861#CFLAGS = -F O3 -DSINIXN 862#LDFLAGS = -F O3 863#CFLAGS = -g -DSINIXN 864 865### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 866#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 867#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 868 869### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 870#GUI_INC_LOC = -I/usr/include 871#GUI_LIB_LOC = -L/usr/lib 872#EXTRA_LIBS = -lgen 873 874### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 875#GUI_INC_LOC = -I/usr/necccs/include 876#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 877#XROOT = /usr/necccs 878#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 879#EXTRA_LIBS = -lsocket -lgen 880 881### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 882# Not needed for Irix 5.3, Ives Aerts reported 883#EXTRA_LIBS = -lmalloc -lc_s 884# Irix 4.0, when regexp and regcmp cannot be found when linking: 885#EXTRA_LIBS = -lmalloc -lc_s -lPW 886 887### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 888# Note: This newer option style is used with the MipsPro compilers ONLY if 889# you are compiling an "n32" or "64" ABI binary (use either a -n32 890# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 891# then the CFLAGS option format will be the typical style (i.e. 892# -Olimit 3000). 893#CFLAGS = -OPT:Olimit=3000 -O 894 895### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 896# compiler features! Beware, the optimization is EXTREMELY thorough 897# and takes quite a long time. 898# Note: See the note above. Here, the -mips3 option automatically 899# enables either the "n32" or "64" ABI, depending on what machine you 900# are compiling on (n32 is explicitly enabled here, just to make sure). 901#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 902#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 903 904### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 905### Suggested by Jon Wright <[email protected]>. 906### Tested on R8000 IRIX6.1 Power Indigo2. 907### Check /etc/compiler.defaults for your compiler settings. 908# either (for 64 bit pointers) uncomment the following line 909#GUI_LIB_LOC = -L/usr/lib64 910# then 911# 1) make config 912# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 913# 3) make 914# 915# or (for 32bit pointers) uncomment the following line 916#EXTRA_DEFS = -n32 917#GUI_LIB_LOC = -L/usr/lib32 918# then 919# 1) make config 920# 2) edit auto/config.mk, add -n32 to LDFLAGS 921# 3) make 922# 923#Alternatively: use -o32 instead of -n32. 924### 925 926### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 927### which is found by configure, doesn't work correctly. Symptom is the 928### error message "Termcap entry too long". Uncomment the next line. 929### On AIX 4.2.1 (and other versions probably), libtermcap is reported 930### not to display properly. 931### after changing this, you need to do "make reconfig". 932#CONF_TERM_LIB = --with-tlib=curses 933 934### (E) If you want to use termlib library instead of the automatically found 935### one. After changing this, you need to do "make reconfig". 936#CONF_TERM_LIB = --with-tlib=termlib 937 938### (a) ESIX V4.2 (Reinhard Wobst) 939#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 940 941### (c) Tandem/NSK (Matthew Woehlke) 942#EXTRA_LIBS = -lfloss 943 944### If you want to use ncurses library instead of the automatically found one 945### after changing this, you need to do "make reconfig". 946#CONF_TERM_LIB = --with-tlib=ncurses 947 948### For GCC on MS-Windows, the ".exe" suffix will be added. 949#EXEEXT = .exe 950#LNKEXT = .exe 951 952### (O) For LynxOS 2.5.0, tested on PC. 953#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 954### For LynxOS 3.0.1, tested on PPC 955#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 956### For LynxOS 3.1.0, tested on PC 957#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 958 959 960### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 961### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 962#CFLAGS = -O -Qtarget=m88110compat 963#EXTRA_LIBS = -lgen 964 965# The value of QUOTESED comes from auto/config.mk. 966# Uncomment the next line to use the default value. 967# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 968 969##################### end of system specific lines ################### }}} 970 971### Names of the programs and targets {{{1 972VIMTARGET = $(VIMNAME)$(EXEEXT) 973EXTARGET = $(EXNAME)$(LNKEXT) 974VIEWTARGET = $(VIEWNAME)$(LNKEXT) 975GVIMNAME = g$(VIMNAME) 976GVIMTARGET = $(GVIMNAME)$(LNKEXT) 977GVIEWNAME = g$(VIEWNAME) 978GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 979RVIMNAME = r$(VIMNAME) 980RVIMTARGET = $(RVIMNAME)$(LNKEXT) 981RVIEWNAME = r$(VIEWNAME) 982RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 983RGVIMNAME = r$(GVIMNAME) 984RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 985RGVIEWNAME = r$(GVIEWNAME) 986RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 987VIMDIFFNAME = $(VIMNAME)diff 988GVIMDIFFNAME = g$(VIMDIFFNAME) 989VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 990GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 991EVIMNAME = e$(VIMNAME) 992EVIMTARGET = $(EVIMNAME)$(LNKEXT) 993EVIEWNAME = e$(VIEWNAME) 994EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 995 996### Names of the tools that are also made {{{1 997TOOLS = xxd/xxd$(EXEEXT) 998 999### Installation directories. The defaults come from configure. {{{1 1000# 1001### prefix the top directory for the data (default "/usr/local") 1002# 1003# Uncomment the next line to install Vim in your home directory. 1004#prefix = $(HOME) 1005 1006### exec_prefix is the top directory for the executable (default $(prefix)) 1007# 1008# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 1009#exec_prefix = /usr/machine 1010 1011### BINDIR dir for the executable (default "$(exec_prefix)/bin") 1012### MANDIR dir for the manual pages (default "$(prefix)/man") 1013### DATADIR dir for the other files (default "$(prefix)/lib" or 1014# "$(prefix)/share") 1015# They may be different when using different architectures for the 1016# executable and a common directory for the other files. 1017# 1018# Uncomment the next line to install Vim in "/usr/bin" 1019#BINDIR = /usr/bin 1020# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1021#MANDIR = /usr/share/man 1022# Uncomment the next line to install Vim help files in "/usr/share/vim" 1023#DATADIR = /usr/share 1024 1025### DESTDIR root of the installation tree. This is prepended to the other 1026# directories. This directory must exist. 1027#DESTDIR = ~/pkg/vim 1028 1029### Directory of the man pages 1030MAN1DIR = /man1 1031 1032### Vim version (adjusted by a script) 1033VIMMAJOR = 8 1034VIMMINOR = 1 1035 1036### Location of Vim files (should not need to be changed, and {{{1 1037### some things might not work when they are changed!) 1038VIMDIR = /vim 1039VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1040HELPSUBDIR = /doc 1041COLSUBDIR = /colors 1042SYNSUBDIR = /syntax 1043INDSUBDIR = /indent 1044AUTOSUBDIR = /autoload 1045PLUGSUBDIR = /plugin 1046FTPLUGSUBDIR = /ftplugin 1047LANGSUBDIR = /lang 1048COMPSUBDIR = /compiler 1049KMAPSUBDIR = /keymap 1050MACROSUBDIR = /macros 1051PACKSUBDIR = /pack 1052TOOLSSUBDIR = /tools 1053TUTORSUBDIR = /tutor 1054SPELLSUBDIR = /spell 1055PRINTSUBDIR = /print 1056PODIR = po 1057 1058### VIMLOC common root of the Vim files (all versions) 1059### VIMRTLOC common root of the runtime Vim files (this version) 1060### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1061### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1062### HELPSUBLOC location for help files 1063### COLSUBLOC location for colorscheme files 1064### SYNSUBLOC location for syntax files 1065### INDSUBLOC location for indent files 1066### AUTOSUBLOC location for standard autoload files 1067### PLUGSUBLOC location for standard plugin files 1068### FTPLUGSUBLOC location for ftplugin files 1069### LANGSUBLOC location for language files 1070### COMPSUBLOC location for compiler files 1071### KMAPSUBLOC location for keymap files 1072### MACROSUBLOC location for macro files 1073### PACKSUBLOC location for packages 1074### TOOLSSUBLOC location for tools files 1075### TUTORSUBLOC location for tutor files 1076### SPELLSUBLOC location for spell files 1077### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1078### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1079### You can override these if you want to install them somewhere else. 1080### Edit feature.h for compile-time settings. 1081VIMLOC = $(DATADIR)$(VIMDIR) 1082VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1083VIMRCLOC = $(VIMLOC) 1084HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1085COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1086SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1087INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1088AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1089PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1090FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1091LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1092COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1093KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1094MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1095PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1096TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1097TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1098SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1099PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1100SCRIPTLOC = $(VIMRTLOC) 1101 1102### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1103### the runtime directory is not below it. 1104#VIMRUNTIMEDIR = $(VIMRTLOC) 1105 1106### Name of the defaults/evim/mswin file target. 1107VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1108EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1109MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1110 1111### Name of the menu file target. 1112SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1113SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1114SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1115 1116### Name of the bugreport file target. 1117SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1118 1119### Name of the rgb.txt file target. 1120SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1121 1122### Name of the file type detection file target. 1123SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1124 1125### Name of the file type detection file target. 1126SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1127 1128### Name of the file type detection script file target. 1129SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1130 1131### Name of the ftplugin-on file target. 1132SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1133 1134### Name of the ftplugin-off file target. 1135SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1136 1137### Name of the indent-on file target. 1138SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1139 1140### Name of the indent-off file target. 1141SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1142 1143### Name of the option window script file target. 1144SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1145 1146# Program to install the program in the target directory. Could also be "mv". 1147INSTALL_PROG = cp 1148 1149# Program to install the data in the target directory. Cannot be "mv"! 1150INSTALL_DATA = cp 1151INSTALL_DATA_R = cp -r 1152 1153### Program to run on installed binary. Use the second one to disable strip. 1154#STRIP = strip 1155#STRIP = /bin/true 1156 1157### Permissions for binaries {{{1 1158BINMOD = 755 1159 1160### Permissions for man page 1161MANMOD = 644 1162 1163### Permissions for help files 1164HELPMOD = 644 1165 1166### Permissions for Perl and shell scripts 1167SCRIPTMOD = 755 1168 1169### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1170VIMSCRIPTMOD = 644 1171 1172### Permissions for all directories that are created 1173DIRMOD = 755 1174 1175### Permissions for all other files that are created 1176FILEMOD = 644 1177 1178# Where to copy the man and help files from 1179HELPSOURCE = ../runtime/doc 1180 1181# Where to copy the script files from (menu, bugreport) 1182SCRIPTSOURCE = ../runtime 1183 1184# Where to copy the colorscheme files from 1185COLSOURCE = ../runtime/colors 1186 1187# Where to copy the syntax files from 1188SYNSOURCE = ../runtime/syntax 1189 1190# Where to copy the indent files from 1191INDSOURCE = ../runtime/indent 1192 1193# Where to copy the standard plugin files from 1194AUTOSOURCE = ../runtime/autoload 1195 1196# Where to copy the standard plugin files from 1197PLUGSOURCE = ../runtime/plugin 1198 1199# Where to copy the ftplugin files from 1200FTPLUGSOURCE = ../runtime/ftplugin 1201 1202# Where to copy the macro files from 1203MACROSOURCE = ../runtime/macros 1204 1205# Where to copy the package files from 1206PACKSOURCE = ../runtime/pack 1207 1208# Where to copy the tools files from 1209TOOLSSOURCE = ../runtime/tools 1210 1211# Where to copy the tutor files from 1212TUTORSOURCE = ../runtime/tutor 1213 1214# Where to copy the spell files from 1215SPELLSOURCE = ../runtime/spell 1216 1217# Where to look for language specific files 1218LANGSOURCE = ../runtime/lang 1219 1220# Where to look for compiler files 1221COMPSOURCE = ../runtime/compiler 1222 1223# Where to look for keymap files 1224KMAPSOURCE = ../runtime/keymap 1225 1226# Where to look for print resource files 1227PRINTSOURCE = ../runtime/print 1228 1229# If you are using Linux, you might want to use this to make vim the 1230# default vi editor, it will create a link from vi to Vim when doing 1231# "make install". An existing file will be overwritten! 1232# When not using it, some make programs can't handle an undefined $(LINKIT). 1233#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1234LINKIT = @echo >/dev/null 1235 1236### 1237### GRAPHICAL USER INTERFACE (GUI). {{{1 1238### 'configure --enable-gui' can enable one of these for you if you did set 1239### a corresponding CONF_OPT_GUI above and have X11. 1240### Override configures choice by uncommenting all the following lines. 1241### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1242### for enabling the Athena or Motif GUI. 1243#GUI_SRC = $(NONE_SRC) 1244#GUI_OBJ = $(NONE_OBJ) 1245#GUI_DEFS = $(NONE_DEFS) 1246#GUI_IPATH = $(NONE_IPATH) 1247#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1248#GUI_LIBS1 = $(NONE_LIBS1) 1249#GUI_LIBS2 = $(NONE_LIBS2) 1250#GUI_INSTALL = $(NONE_INSTALL) 1251#GUI_TARGETS = $(NONE_TARGETS) 1252#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1253#GUI_TESTTARGET = $(NONE_TESTTARGET) 1254#GUI_BUNDLE = $(NONE_BUNDLE) 1255 1256# Without a GUI install the normal way. 1257NONE_INSTALL = install_normal 1258 1259### GTK GUI 1260GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c gui_gtk_f.c \ 1261 gui_beval.c $(GRESOURCE_SRC) 1262GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1263 objects/gui_gtk_f.o \ 1264 objects/gui_beval.o $(GRESOURCE_OBJ) 1265GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1266GTK_IPATH = $(GUI_INC_LOC) 1267GTK_LIBS_DIR = $(GUI_LIB_LOC) 1268GTK_LIBS1 = 1269GTK_LIBS2 = $(GTK_LIBNAME) 1270GTK_INSTALL = install_normal install_gui_extra 1271GTK_TARGETS = installglinks 1272GTK_MAN_TARGETS = yes 1273GTK_TESTTARGET = gui 1274GTK_BUNDLE = 1275 1276### Motif GUI 1277MOTIF_SRC = gui.c gui_motif.c gui_x11.c gui_beval.c \ 1278 gui_xmdlg.c gui_xmebw.c 1279MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1280 objects/gui_beval.o \ 1281 objects/gui_xmdlg.o objects/gui_xmebw.o 1282MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1283MOTIF_IPATH = $(GUI_INC_LOC) 1284MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1285MOTIF_LIBS1 = 1286MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1287MOTIF_INSTALL = install_normal install_gui_extra 1288MOTIF_TARGETS = installglinks 1289MOTIF_MAN_TARGETS = yes 1290MOTIF_TESTTARGET = gui 1291MOTIF_BUNDLE = 1292 1293### Athena GUI 1294### Use Xaw3d to make the menus look a little bit nicer 1295#XAW_LIB = -lXaw3d 1296XAW_LIB = -lXaw 1297 1298### When using Xaw3d, uncomment/comment the following lines to also get the 1299### scrollbars from Xaw3d. 1300#ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1301#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1302# objects/gui_beval.o objects/gui_at_fs.o 1303#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1304# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1305# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1306ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c \ 1307 gui_at_sb.c gui_at_fs.c 1308ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1309 objects/gui_beval.o \ 1310 objects/gui_at_sb.o objects/gui_at_fs.o 1311ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1312 1313ATHENA_IPATH = $(GUI_INC_LOC) 1314ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1315ATHENA_LIBS1 = $(XAW_LIB) 1316ATHENA_LIBS2 = -lXt 1317ATHENA_INSTALL = install_normal install_gui_extra 1318ATHENA_TARGETS = installglinks 1319ATHENA_MAN_TARGETS = yes 1320ATHENA_TESTTARGET = gui 1321ATHENA_BUNDLE = 1322 1323### neXtaw GUI 1324NEXTAW_LIB = -lneXtaw 1325 1326NEXTAW_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1327NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1328 objects/gui_beval.o objects/gui_at_fs.o 1329NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1330 1331NEXTAW_IPATH = $(GUI_INC_LOC) 1332NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1333NEXTAW_LIBS1 = $(NEXTAW_LIB) 1334NEXTAW_LIBS2 = -lXt 1335NEXTAW_INSTALL = install_normal install_gui_extra 1336NEXTAW_TARGETS = installglinks 1337NEXTAW_MAN_TARGETS = yes 1338NEXTAW_TESTTARGET = gui 1339NEXTAW_BUNDLE = 1340 1341### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1342# errors: ld: Undefined symbol 1343# _get_wmShellWidgetClass 1344# _get_applicationShellWidgetClass 1345# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1346# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1347#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1348# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1349# too: 1350#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1351 1352# PHOTON GUI 1353PHOTONGUI_SRC = gui.c gui_photon.c 1354PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o 1355PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1356PHOTONGUI_IPATH = 1357PHOTONGUI_LIBS_DIR = 1358PHOTONGUI_LIBS1 = -lph -lphexlib 1359PHOTONGUI_LIBS2 = 1360PHOTONGUI_INSTALL = install_normal install_gui_extra 1361PHOTONGUI_TARGETS = installglinks 1362PHOTONGUI_MAN_TARGETS = yes 1363PHOTONGUI_TESTTARGET = gui 1364PHOTONGUI_BUNDLE = 1365 1366# CARBON GUI 1367CARBONGUI_SRC = gui.c gui_mac.c 1368CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o 1369CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1370 -Wall -Wno-unknown-pragmas \ 1371 -mdynamic-no-pic -pipe 1372CARBONGUI_IPATH = -I. -Iproto 1373CARBONGUI_LIBS_DIR = 1374CARBONGUI_LIBS1 = -framework Carbon 1375CARBONGUI_LIBS2 = 1376CARBONGUI_INSTALL = install_macosx 1377CARBONGUI_TARGETS = 1378CARBONGUI_MAN_TARGETS = 1379CARBONGUI_TESTTARGET = gui 1380CARBONGUI_BUNDLE = gui_bundle 1381APPDIR = $(VIMNAME).app 1382CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1383 1384# All GUI files 1385ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c 1386ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1387 1388# }}} 1389 1390TERM_DEPS = \ 1391 libvterm/include/vterm.h \ 1392 libvterm/include/vterm_keycodes.h \ 1393 libvterm/src/rect.h \ 1394 libvterm/src/utf8.h \ 1395 libvterm/src/vterm_internal.h 1396 1397TERM_SRC = libvterm/src/*.c 1398 1399XDIFF_SRC = \ 1400 xdiff/xdiffi.c \ 1401 xdiff/xemit.c \ 1402 xdiff/xprepare.c \ 1403 xdiff/xutils.c \ 1404 xdiff/xhistogram.c \ 1405 xdiff/xpatience.c \ 1406 1407XDIFF_OBJS = \ 1408 objects/xdiffi.o \ 1409 objects/xemit.o \ 1410 objects/xprepare.o \ 1411 objects/xutils.o \ 1412 objects/xhistogram.o \ 1413 objects/xpatience.o \ 1414 1415XDIFF_INCL = \ 1416 xdiff/xdiff.h \ 1417 xdiff/xdiffi.h \ 1418 xdiff/xemit.h \ 1419 xdiff/xinclude.h \ 1420 xdiff/xmacros.h \ 1421 xdiff/xprepare.h \ 1422 xdiff/xtypes.h \ 1423 xdiff/xutils.h \ 1424 1425### Command to create dependencies based on #include "..." 1426### prototype headers are ignored due to -DPROTO, system 1427### headers #include <...> are ignored if we use the -MM option, as 1428### e.g. provided by gcc-cpp. 1429### Include FEAT_GUI to get dependency on gui.h 1430### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1431CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1432 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1433 1434# flags for cproto 1435# This is for cproto 3 patchlevel 8 or below 1436# __inline, __attribute__ and __extension__ are not recognized by cproto 1437# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1438#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1439# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1440# -D__extension__= -D__restrict="" \ 1441# -D__gnuc_va_list=char -D__builtin_va_list=char 1442 1443# 1444# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1445# __inline and __attribute__ are now recognized by cproto 1446# -D"foo()=" is not supported by all compilers so do not use it 1447NO_ATTR= 1448# 1449# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1450# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1451# 1452# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1453PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1454 1455 1456################################################ 1457## no changes required below this line ## 1458################################################ 1459 1460SHELL = /bin/sh 1461 1462# We would normally use "mkdir -p" but it doesn't work properly everywhere. 1463# Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" 1464# directory. Always use the install-sh script, it's slower but reliable. 1465MKDIR_P = $(SHELL) install-sh -c -d 1466 1467.SUFFIXES: 1468.SUFFIXES: .c .o .pro 1469 1470VTERM_CFLAGS = -Ilibvterm/include 1471 1472PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1473POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1474 1475ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CLFAGS) $(POST_DEFS) 1476 1477# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1478# with "-E". 1479OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1480 1481LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \ 1482 $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \ 1483 $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \ 1484 -Dinline= -D__extension__= -Dalloca=alloca 1485 1486LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1487 1488DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1489 1490# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1491# needed by racket. 1492ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1493ALL_LIBS = \ 1494 $(GUI_LIBS1) \ 1495 $(GUI_X_LIBS) \ 1496 $(GUI_LIBS2) \ 1497 $(X_PRE_LIBS) \ 1498 $(X_LIBS) \ 1499 $(X_EXTRA_LIBS) \ 1500 $(MZSCHEME_LIBS) \ 1501 $(LIBS) \ 1502 $(EXTRA_LIBS) \ 1503 $(LUA_LIBS) \ 1504 $(PERL_LIBS) \ 1505 $(PYTHON_LIBS) \ 1506 $(PYTHON3_LIBS) \ 1507 $(TCL_LIBS) \ 1508 $(RUBY_LIBS) \ 1509 $(PROFILE_LIBS) \ 1510 $(SANITIZER_LIBS) \ 1511 $(LEAK_LIBS) 1512 1513# abbreviations 1514DEST_BIN = $(DESTDIR)$(BINDIR) 1515DEST_VIM = $(DESTDIR)$(VIMLOC) 1516DEST_RT = $(DESTDIR)$(VIMRTLOC) 1517DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1518DEST_COL = $(DESTDIR)$(COLSUBLOC) 1519DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1520DEST_IND = $(DESTDIR)$(INDSUBLOC) 1521DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1522DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1523DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1524DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1525DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1526DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1527DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1528DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1529DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1530DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1531DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1532DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1533DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1534DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1535 1536# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1537# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1538# directory first. 1539# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1540DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1541DEST_MAN_DA = $(DEST_MAN_TOP)/da$(MAN1DIR) 1542DEST_MAN_DA_I = $(DEST_MAN_TOP)/da.ISO8859-1$(MAN1DIR) 1543DEST_MAN_DA_U = $(DEST_MAN_TOP)/da.UTF-8$(MAN1DIR) 1544DEST_MAN_DE = $(DEST_MAN_TOP)/de$(MAN1DIR) 1545DEST_MAN_DE_I = $(DEST_MAN_TOP)/de.ISO8859-1$(MAN1DIR) 1546DEST_MAN_DE_U = $(DEST_MAN_TOP)/de.UTF-8$(MAN1DIR) 1547DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1548DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1549DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1550DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1551DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1552DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1553DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1554DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1555DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1556DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1557DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1558DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1559 1560# stuff common to all systems 1561include Make_all.mak 1562 1563# get the list of tests 1564include testdir/Make_all.mak 1565 1566# BASIC_SRC: files that are always used 1567# GUI_SRC: extra GUI files for current configuration 1568# ALL_GUI_SRC: all GUI files for Unix 1569# 1570# SRC: files used for current configuration 1571# ALL_SRC: source files used for make depend and make lint 1572 1573BASIC_SRC = \ 1574 arabic.c \ 1575 beval.c \ 1576 blob.c \ 1577 blowfish.c \ 1578 buffer.c \ 1579 charset.c \ 1580 crypt.c \ 1581 crypt_zip.c \ 1582 dict.c \ 1583 diff.c \ 1584 digraph.c \ 1585 edit.c \ 1586 eval.c \ 1587 evalfunc.c \ 1588 ex_cmds.c \ 1589 ex_cmds2.c \ 1590 ex_docmd.c \ 1591 ex_eval.c \ 1592 ex_getln.c \ 1593 farsi.c \ 1594 fileio.c \ 1595 fold.c \ 1596 getchar.c \ 1597 hardcopy.c \ 1598 hashtab.c \ 1599 if_cscope.c \ 1600 if_xcmdsrv.c \ 1601 json.c \ 1602 list.c \ 1603 main.c \ 1604 mark.c \ 1605 memfile.c \ 1606 memline.c \ 1607 menu.c \ 1608 message.c \ 1609 misc1.c \ 1610 misc2.c \ 1611 move.c \ 1612 mbyte.c \ 1613 normal.c \ 1614 ops.c \ 1615 option.c \ 1616 os_unix.c \ 1617 auto/pathdef.c \ 1618 popupmnu.c \ 1619 pty.c \ 1620 quickfix.c \ 1621 regexp.c \ 1622 screen.c \ 1623 search.c \ 1624 sha256.c \ 1625 sign.c \ 1626 spell.c \ 1627 spellfile.c \ 1628 syntax.c \ 1629 tag.c \ 1630 term.c \ 1631 terminal.c \ 1632 textprop.c \ 1633 ui.c \ 1634 undo.c \ 1635 userfunc.c \ 1636 version.c \ 1637 window.c \ 1638 $(OS_EXTRA_SRC) 1639 1640SRC = $(BASIC_SRC) \ 1641 $(GUI_SRC) \ 1642 $(TERM_SRC) \ 1643 $(XDIFF_SRC) \ 1644 $(HANGULIN_SRC) \ 1645 $(LUA_SRC) \ 1646 $(MZSCHEME_SRC) \ 1647 $(PERL_SRC) \ 1648 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1649 $(TCL_SRC) \ 1650 $(RUBY_SRC) 1651 1652EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1653 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1654 gui_beval.c netbeans.c channel.c \ 1655 $(GRESOURCE_SRC) 1656 1657# Unittest files 1658JSON_TEST_SRC = json_test.c 1659JSON_TEST_TARGET = json_test$(EXEEXT) 1660KWORD_TEST_SRC = kword_test.c 1661KWORD_TEST_TARGET = kword_test$(EXEEXT) 1662MEMFILE_TEST_SRC = memfile_test.c 1663MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1664MESSAGE_TEST_SRC = message_test.c 1665MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1666 1667UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1668UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1669RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1670 1671# All sources, also the ones that are not configured 1672ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) \ 1673 $(EXTRA_SRC) $(TERM_SRC) $(XDIFF_SRC) 1674 1675# Which files to check with lint. Select one of these three lines. ALL_SRC 1676# checks more, but may not work well for checking a GUI that wasn't configured. 1677# The perl sources also don't work well with lint. 1678LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1679 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1680 $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) 1681#LINT_SRC = $(SRC) 1682#LINT_SRC = $(ALL_SRC) 1683#LINT_SRC = $(BASIC_SRC) 1684 1685OBJ_COMMON = \ 1686 objects/arabic.o \ 1687 objects/beval.o \ 1688 objects/buffer.o \ 1689 objects/blob.o \ 1690 objects/blowfish.o \ 1691 objects/crypt.o \ 1692 objects/crypt_zip.o \ 1693 objects/dict.o \ 1694 objects/diff.o \ 1695 objects/digraph.o \ 1696 objects/edit.o \ 1697 objects/eval.o \ 1698 objects/evalfunc.o \ 1699 objects/ex_cmds.o \ 1700 objects/ex_cmds2.o \ 1701 objects/ex_docmd.o \ 1702 objects/ex_eval.o \ 1703 objects/ex_getln.o \ 1704 objects/farsi.o \ 1705 objects/fileio.o \ 1706 objects/fold.o \ 1707 objects/getchar.o \ 1708 objects/hardcopy.o \ 1709 objects/hashtab.o \ 1710 $(HANGULIN_OBJ) \ 1711 objects/if_cscope.o \ 1712 objects/if_xcmdsrv.o \ 1713 objects/list.o \ 1714 objects/mark.o \ 1715 objects/memline.o \ 1716 objects/menu.o \ 1717 objects/misc1.o \ 1718 objects/misc2.o \ 1719 objects/move.o \ 1720 objects/mbyte.o \ 1721 objects/normal.o \ 1722 objects/ops.o \ 1723 objects/option.o \ 1724 objects/os_unix.o \ 1725 objects/pathdef.o \ 1726 objects/popupmnu.o \ 1727 objects/pty.o \ 1728 objects/quickfix.o \ 1729 objects/regexp.o \ 1730 objects/screen.o \ 1731 objects/search.o \ 1732 objects/sha256.o \ 1733 objects/sign.o \ 1734 objects/spell.o \ 1735 objects/spellfile.o \ 1736 objects/syntax.o \ 1737 objects/tag.o \ 1738 objects/term.o \ 1739 objects/terminal.o \ 1740 objects/textprop.o \ 1741 objects/ui.o \ 1742 objects/undo.o \ 1743 objects/userfunc.o \ 1744 objects/version.o \ 1745 objects/window.o \ 1746 $(GUI_OBJ) \ 1747 $(TERM_OBJ) \ 1748 $(LUA_OBJ) \ 1749 $(MZSCHEME_OBJ) \ 1750 $(PERL_OBJ) \ 1751 $(PYTHON_OBJ) \ 1752 $(PYTHON3_OBJ) \ 1753 $(TCL_OBJ) \ 1754 $(RUBY_OBJ) \ 1755 $(OS_EXTRA_OBJ) \ 1756 $(NETBEANS_OBJ) \ 1757 $(CHANNEL_OBJ) \ 1758 $(XDIFF_OBJS) 1759 1760# The files included by tests are not in OBJ_COMMON. 1761OBJ_MAIN = \ 1762 objects/charset.o \ 1763 objects/json.o \ 1764 objects/main.o \ 1765 objects/memfile.o \ 1766 objects/message.o 1767 1768OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1769 1770OBJ_JSON_TEST = \ 1771 objects/charset.o \ 1772 objects/memfile.o \ 1773 objects/message.o \ 1774 objects/json_test.o 1775 1776JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1777 1778OBJ_KWORD_TEST = \ 1779 objects/json.o \ 1780 objects/memfile.o \ 1781 objects/message.o \ 1782 objects/kword_test.o 1783 1784KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1785 1786OBJ_MEMFILE_TEST = \ 1787 objects/charset.o \ 1788 objects/json.o \ 1789 objects/message.o \ 1790 objects/memfile_test.o 1791 1792MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1793 1794OBJ_MESSAGE_TEST = \ 1795 objects/charset.o \ 1796 objects/json.o \ 1797 objects/memfile.o \ 1798 objects/message_test.o 1799 1800MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1801 1802ALL_OBJ = $(OBJ_COMMON) \ 1803 $(OBJ_MAIN) \ 1804 $(OBJ_JSON_TEST) \ 1805 $(OBJ_KWORD_TEST) \ 1806 $(OBJ_MEMFILE_TEST) \ 1807 $(OBJ_MESSAGE_TEST) 1808 1809 1810PRO_AUTO = \ 1811 arabic.pro \ 1812 blowfish.pro \ 1813 buffer.pro \ 1814 charset.pro \ 1815 crypt.pro \ 1816 crypt_zip.pro \ 1817 dict.pro \ 1818 diff.pro \ 1819 digraph.pro \ 1820 edit.pro \ 1821 eval.pro \ 1822 evalfunc.pro \ 1823 ex_cmds.pro \ 1824 ex_cmds2.pro \ 1825 ex_docmd.pro \ 1826 ex_eval.pro \ 1827 ex_getln.pro \ 1828 farsi.pro \ 1829 fileio.pro \ 1830 fold.pro \ 1831 getchar.pro \ 1832 hardcopy.pro \ 1833 hashtab.pro \ 1834 hangulin.pro \ 1835 if_cscope.pro \ 1836 if_lua.pro \ 1837 if_mzsch.pro \ 1838 if_python.pro \ 1839 if_python3.pro \ 1840 if_ruby.pro \ 1841 if_xcmdsrv.pro \ 1842 json.pro \ 1843 list.pro \ 1844 main.pro \ 1845 mark.pro \ 1846 mbyte.pro \ 1847 memfile.pro \ 1848 memline.pro \ 1849 menu.pro \ 1850 message.pro \ 1851 misc1.pro \ 1852 misc2.pro \ 1853 move.pro \ 1854 normal.pro \ 1855 ops.pro \ 1856 option.pro \ 1857 os_mac_conv.pro \ 1858 os_unix.pro \ 1859 popupmnu.pro \ 1860 pty.pro \ 1861 quickfix.pro \ 1862 regexp.pro \ 1863 screen.pro \ 1864 search.pro \ 1865 sha256.pro \ 1866 sign.pro \ 1867 spell.pro \ 1868 spellfile.pro \ 1869 syntax.pro \ 1870 tag.pro \ 1871 term.pro \ 1872 terminal.pro \ 1873 termlib.pro \ 1874 textprop.pro \ 1875 ui.pro \ 1876 undo.pro \ 1877 userfunc.pro \ 1878 version.pro \ 1879 window.pro \ 1880 beval.pro \ 1881 gui_beval.pro \ 1882 netbeans.pro \ 1883 channel.pro \ 1884 $(ALL_GUI_PRO) \ 1885 $(TCL_PRO) 1886 1887# Resources used for the Mac are in one directory. 1888RSRC_DIR = os_mac_rsrc 1889 1890PRO_MANUAL = os_amiga.pro os_win32.pro \ 1891 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1892 1893# Default target is making the executable and tools 1894all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1895 1896tools: $(TOOLS) 1897 1898# Run configure with all the setting from above. 1899# 1900# Note: auto/config.h doesn't depend on configure, because running configure 1901# doesn't always update auto/config.h. The timestamp isn't changed if the 1902# file contents didn't change (to avoid recompiling everything). Including a 1903# dependency on auto/config.h would cause running configure each time when 1904# auto/config.h isn't updated. The dependency on auto/config.mk should make 1905# sure configure is run when it's needed. 1906# 1907# Remove the config.cache every time, once in a while it causes problems that 1908# are very hard to figure out. 1909# 1910config auto/config.mk: auto/configure config.mk.in config.h.in 1911 -rm -f auto/config.cache 1912 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1913 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1914 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1915 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1916 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1917 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1918 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1919 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1920 $(CONF_OPT_AUTOSERVE) $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1921 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1922 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1923 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1924 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) \ 1925 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1926 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1927 $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ 1928 $(CONF_ARGS) $(CONF_ARGS1) $(CONF_ARGS2) $(CONF_ARGS3) \ 1929 $(CONF_ARGS4) $(CONF_ARGS5) $(CONF_ARGS6) \ 1930 $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1931 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1932 $(CONF_OPT_SYSMOUSE); \ 1933 fi 1934 1935# Use "make reconfig" to rerun configure without cached values. 1936# When config.h changes, most things will be recompiled automatically. 1937# Invoke $(MAKE) to run config with the empty auto/config.mk. 1938# Invoke $(MAKE) to build all with the filled auto/config.mk. 1939reconfig: scratch clean 1940 $(MAKE) -f Makefile config 1941 $(MAKE) -f Makefile all 1942 1943# Run autoconf to produce auto/configure. 1944# Note: 1945# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1946# producing auto/configure. 1947# - autoconf is not run automatically, because a patch usually changes both 1948# configure.ac and auto/configure but can't update the timestamps. People 1949# who do not have (the correct version of) autoconf would run into trouble. 1950# 1951# Two tricks are required to make autoconf put its output in the "auto" dir: 1952# - Temporarily move the ./configure script to ./configure.save. Don't 1953# overwrite it, it's probably the result of an aborted autoconf. 1954# - Use sed to change ./config.log to auto/config.log in the configure script. 1955# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1956# care of: 1957# - configure.lineno: has the line numbers replaced with $LINENO. That 1958# improves patches a LOT, thus use it instead (until someone says it doesn't 1959# work on some system). 1960# - autom4te.cache directory is created and not cleaned up. Delete it. 1961# - Uses ">config.log" instead of "./config.log". 1962autoconf: 1963 if test ! -f configure.save; then mv configure configure.save; fi 1964 $(AUTOCONF) 1965 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1966 chmod 755 auto/configure 1967 mv -f configure.save configure 1968 -rm -rf autom4te.cache 1969 -rm -f auto/config.status auto/config.cache 1970 1971# Run vim script to generate the Ex command lookup table. 1972# This only needs to be run when a command name has been added or changed. 1973# If this fails because you don't have Vim yet, first build and install Vim 1974# without changes. 1975cmdidxs: ex_cmds.h 1976 vim -u NONE -i NONE -X -S create_cmdidxs.vim 1977 1978 1979# The normal command to compile a .c file to its .o file. 1980# Without or with ALL_CFLAGS. 1981CCC_NF = $(CC) -c -I$(srcdir) 1982CCC = $(CCC_NF) $(ALL_CFLAGS) 1983 1984 1985# Link the target for normal use or debugging. 1986# A shell script is used to try linking without unnecessary libraries. 1987$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1988 $(CCC) version.c -o objects/version.o 1989 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1990 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 1991 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 1992 sh $(srcdir)/link.sh 1993 1994xxd/xxd$(EXEEXT): xxd/xxd.c 1995 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 1996 $(MAKE) -f Makefile 1997 1998# Build the language specific files if they were unpacked. 1999# Generate the converted .mo files separately, it's no problem if this fails. 2000languages: 2001 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2002 cd $(PODIR); \ 2003 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 2004 fi 2005 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2006 cd $(PODIR); \ 2007 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 2008 fi 2009 2010# Update the *.po files for changes in the sources. Only run manually. 2011update-po: 2012 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 2013 2014# Generate function prototypes. This is not needed to compile vim, but if 2015# you want to use it, cproto is out there on the net somewhere -- Webb 2016# 2017# When generating os_amiga.pro and os_win32.pro there will be a 2018# few include files that can not be found, that's OK. 2019 2020proto: $(PRO_AUTO) $(PRO_MANUAL) 2021 2022# Filter out arguments that cproto doesn't support. 2023# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 2024# them as a list of individual flags. 2025# The -E"gcc -E" argument must be separate to avoid problems with shell 2026# quoting. 2027# Strip -O2, it may cause cproto to write stderr to the file "2". 2028CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 2029 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g' -e 's/ -O[^ ]\+//g'` 2030 2031### Would be nice if this would work for "normal" make. 2032### Currently it only works for (Free)BSD make. 2033#$(PRO_AUTO): $$(*F).c 2034# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 2035 2036# Always define FEAT_GUI. This may generate a few warnings if it's also 2037# defined in auto/config.h, you can ignore that. 2038.c.pro: 2039 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2040 echo "/* vim: set ft=c : */" >> proto/$@ 2041 2042os_amiga.pro: os_amiga.c 2043 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 2044 echo "/* vim: set ft=c : */" >> proto/$@ 2045 2046os_win32.pro: os_win32.c 2047 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2048 echo "/* vim: set ft=c : */" >> proto/$@ 2049 2050os_mswin.pro: os_mswin.c 2051 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2052 echo "/* vim: set ft=c : */" >> proto/$@ 2053 2054winclip.pro: winclip.c 2055 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2056 echo "/* vim: set ft=c : */" >> proto/$@ 2057 2058os_beos.pro: os_beos.c 2059 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 2060 echo "/* vim: set ft=c : */" >> proto/$@ 2061 2062os_vms.pro: os_vms.c 2063# must use os_vms_conf.h for auto/config.h 2064 mv auto/config.h auto/config.h.save 2065 cp os_vms_conf.h auto/config.h 2066 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 2067 echo "/* vim: set ft=c : */" >> proto/$@ 2068 rm auto/config.h 2069 mv auto/config.h.save auto/config.h 2070 2071# if_perl.pro is special: Use the generated if_perl.c for input and remove 2072# prototypes for local functions. 2073if_perl.pro: auto/if_perl.c 2074 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 2075 2076gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2077 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2078 echo "/* vim: set ft=c : */" >> proto/$@ 2079 2080notags: 2081 -rm -f tags 2082 2083# Note: tags is made for the currently configured version, can't include both 2084# Motif and Athena GUI 2085# You can ignore error messages for missing files. 2086tags TAGS: notags 2087 $(TAGPRG) $(TAGS_FILES) 2088 2089# Make a highlight file for types. Requires Exuberant ctags and awk 2090types: types.vim 2091types.vim: $(TAGS_FILES) 2092 ctags --c-kinds=gstu -o- $(TAGS_FILES) |\ 2093 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2094 {printf("%s ", $$1)}END{print ""}' > $@ 2095 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2096 2097# TESTING 2098# 2099# Execute the test scripts and the unittests. 2100test check: scripttests unittests test_libvterm 2101 2102# Execute the test scripts. Run these after compiling Vim, before installing. 2103# This doesn't depend on $(VIMTARGET), because that won't work when configure 2104# wasn't run yet. Restart make to build it instead. 2105# 2106# This will produce a lot of garbage on your screen, including a few error 2107# messages. Don't worry about that. 2108# If there is a real error, there will be a difference between "testXX.out" and 2109# a "testXX.ok" file. 2110# If everything is alright, the final message will be "ALL DONE". If not you 2111# get "TEST FAILURE". 2112# 2113scripttests: 2114 $(MAKE) -f Makefile $(VIMTARGET) 2115 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2116 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2117 fi 2118 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2119 ln -s $(VIMTARGET) vim; \ 2120 fi 2121 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2122 2123# Run the tests with the GUI. Assumes vim/gvim was already built 2124testgui: 2125 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2126 2127benchmark: 2128 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2129 2130unittesttargets: 2131 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2132 2133# Swap these lines to run individual tests with gvim instead of vim. 2134VIMTESTTARGET = $(VIMTARGET) 2135# VIMTESTTARGET = $(GVIMTARGET) 2136 2137# Execute the unittests one by one. 2138unittest unittests: $(RUN_UNITTESTS) 2139 2140run_json_test: $(JSON_TEST_TARGET) 2141 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2142 2143run_kword_test: $(KWORD_TEST_TARGET) 2144 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2145 2146run_memfile_test: $(MEMFILE_TEST_TARGET) 2147 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2148 2149run_message_test: $(MESSAGE_TEST_TARGET) 2150 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2151 2152# Run the libvterm tests. 2153# This currently doesn't work on Mac, only run on Linux for now. 2154test_libvterm: 2155 @if test `uname` = "Linux"; then \ 2156 cd libvterm; $(MAKE) -f Makefile test \ 2157 CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"; \ 2158 fi 2159 2160# Run individual OLD style test. 2161# These do not depend on the executable, compile it when needed. 2162test1 \ 2163 test_eval \ 2164 test3 test11 test14 test17 \ 2165 test29 test30 test37 test39 \ 2166 test42 test44 test48 test49 \ 2167 test52 test59 \ 2168 test64 test69 \ 2169 test70 test72 \ 2170 test86 test87 test88 \ 2171 test94 test95 test99 test108: 2172 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2173 2174# Run individual NEW style test. 2175# These do not depend on the executable, compile it when needed. 2176$(NEW_TESTS): 2177 cd testdir; $(MAKE) $@ VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2178 2179newtests: 2180 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2181 @if test -f testdir/test.log; then \ 2182 cat testdir/test.log; \ 2183 fi 2184 cat testdir/messages 2185 2186testclean: 2187 cd testdir; $(MAKE) -f Makefile clean 2188 if test -d $(PODIR); then \ 2189 cd $(PODIR); $(MAKE) checkclean; \ 2190 fi 2191 2192# Unittests 2193# It's build just like Vim to satisfy all dependencies. 2194$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2195 $(CCC) version.c -o objects/version.o 2196 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2197 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2198 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2199 sh $(srcdir)/link.sh 2200 2201$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2202 $(CCC) version.c -o objects/version.o 2203 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2204 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2205 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2206 sh $(srcdir)/link.sh 2207 2208$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2209 $(CCC) version.c -o objects/version.o 2210 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2211 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2212 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2213 sh $(srcdir)/link.sh 2214 2215$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2216 $(CCC) version.c -o objects/version.o 2217 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2218 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2219 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2220 sh $(srcdir)/link.sh 2221 2222# install targets 2223 2224install: $(GUI_INSTALL) 2225 2226install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2227 2228install_gui_extra: installgtutorbin 2229 2230installvim: installvimbin installtutorbin \ 2231 installruntime installlinks installmanlinks 2232 2233# 2234# Avoid overwriting an existing executable, somebody might be running it and 2235# overwriting it could cause it to crash. Deleting it is OK, it won't be 2236# really deleted until all running processes for it have exited. It is 2237# renamed first, in case the deleting doesn't work. 2238# 2239# If you want to keep an older version, rename it before running "make 2240# install". 2241# 2242installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2243 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2244 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2245 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2246 fi 2247 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2248 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2249 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2250# may create a link to the new executable from /usr/bin/vi 2251 -$(LINKIT) 2252 2253# Long list of arguments for the shell script that installs the manual pages 2254# for one language. 2255INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2256 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2257 2258# Install most of the runtime files 2259installruntime: installrtbase installmacros installpack installtutor installspell 2260 2261# install the help files; first adjust the contents for the final location 2262installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2263 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2264 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml \ 2265 $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2266 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2267# Generate the help tags with ":helptags" to handle all languages. 2268# Move the distributed tags file aside and restore it, to avoid it being 2269# different from the repository. 2270 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2271 mv -f tags tags.dist; fi 2272 @echo generating help tags 2273 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2274 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2275 cd $(HELPSOURCE); \ 2276 files=`ls *.txt tags`; \ 2277 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2278 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2279 cd $(DEST_HELP); \ 2280 chmod $(HELPMOD) $$files 2281 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2282 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2283 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2284# install the menu files 2285 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2286 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2287 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2288 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2289 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2290 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2291# install the defaults/evim/mswin file 2292 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2293 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2294 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2295 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2296 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2297 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2298# install the rgb.txt file 2299 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2300 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2301# install the bugreport file 2302 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2303 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2304# install the example vimrc files 2305 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2306 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2307 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2308 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2309# install the file type detection files 2310 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2311 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2312 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2313 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2314 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2315 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2316 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2317 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2318 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2319 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2320 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2321 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2322 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2323 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2324 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2325 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2326# install the print resource files 2327 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2328 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2329# install the colorscheme files 2330 cd $(COLSOURCE); $(INSTALL_DATA_R) *.vim tools README.txt $(DEST_COL) 2331 cd $(DEST_COL); chmod $(DIRMOD) tools 2332 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt tools/*.vim 2333# install the syntax files 2334 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2335 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2336# install the indent files 2337 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2338 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2339# install the standard autoload files 2340 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2341 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2342 cd $(AUTOSOURCE)/dist; $(INSTALL_DATA) *.vim $(DEST_AUTO)/dist 2343 cd $(DEST_AUTO)/dist; chmod $(HELPMOD) *.vim 2344 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2345 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2346# install the standard plugin files 2347 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2348 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2349# install the ftplugin files 2350 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2351 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2352# install the compiler files 2353 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2354 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2355 2356installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2357 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2358 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2359 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2360 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2361# When using CVS some CVS directories might have been copied. 2362# Also delete AAPDIR and *.info files. 2363 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2364 if test -n "$$cvs"; then \ 2365 rm -rf $$cvs; \ 2366 fi 2367 2368installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2369 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2370 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2371 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2372 2373# install the tutor files 2374installtutorbin: $(DEST_VIM) 2375 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2376 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2377 2378installgtutorbin: $(DEST_VIM) 2379 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2380 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2381 2382installtutor: $(DEST_RT) $(DEST_TUTOR) 2383 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2384 -rm -f $(DEST_TUTOR)/*.info 2385 chmod $(HELPMOD) $(DEST_TUTOR)/* 2386 2387# Install the spell files, if they exist. This assumes at least the English 2388# spell file is there. 2389installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2390 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2391 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2392 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2393 fi 2394 2395# install helper program xxd 2396installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2397 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2398 $(INSTALL_TOOL_LANGS) 2399 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2400 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2401 rm -f $(DEST_BIN)/xxd.rm; \ 2402 fi 2403 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2404 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2405 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2406 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2407 2408# install the runtime tools 2409 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2410# When using CVS some CVS directories might have been copied. 2411 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2412 if test -n "$$cvs"; then \ 2413 rm -rf $$cvs; \ 2414 fi 2415 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2416# replace the path in some tools 2417 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2418 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2419 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2420 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2421 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2422 2423# install the language specific files for tools, if they were unpacked 2424install-tool-languages: 2425 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2426 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2427 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2428 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2429 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2430 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2431 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2432 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2433 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2434 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2435 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2436 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2437 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2438 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2439 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2440 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2441 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2442 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2443 2444# install the language specific files, if they were unpacked 2445install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2446 -$(SHELL) ./installman.sh install $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2447 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2448 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2449 -$(SHELL) ./installman.sh install $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2450 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2451 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2452 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2453 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2454 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2455 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2456 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2457 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2458 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2459 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2460 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2461 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2462 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2463 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2464 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2465 $(DEST_MAN_DA) $(INSTALLMLARGS) 2466 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2467 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2468 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2469 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2470 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2471 $(DEST_MAN_DE) $(INSTALLMLARGS) 2472 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2473 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2474 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2475 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2476 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2477 $(DEST_MAN_FR) $(INSTALLMLARGS) 2478 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2479 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2480 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2481 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2482 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2483 $(DEST_MAN_IT) $(INSTALLMLARGS) 2484 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2485 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2486 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2487 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2488 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2489 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2490 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2491 $(DEST_MAN_PL) $(INSTALLMLARGS) 2492 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2493 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2494 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2495 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2496 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2497 $(DEST_MAN_RU) $(INSTALLMLARGS) 2498 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2499 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2500 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2501 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2502 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2503 fi 2504 if test -d $(LANGSOURCE); then \ 2505 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2506 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2507 fi 2508 if test -d $(KMAPSOURCE); then \ 2509 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2510 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2511 fi 2512 2513# Install the icons for KDE, if the directory exists and the icon doesn't. 2514# Always when $(DESTDIR) is not empty. 2515ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2516ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2517ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2518ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2519DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2520KDEPATH = $(HOME)/.kde/share/icons 2521install-icons: 2522 if test -n "$(DESTDIR)"; then \ 2523 $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ 2524 $(ICON16PATH) $(DESKTOPPATH); \ 2525 fi 2526 2527 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2528 -a ! -f $(ICON48PATH)/gvim.png; then \ 2529 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2530 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2531 -a -w $(ICONTHEMEPATH) \ 2532 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2533 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2534 fi \ 2535 fi 2536 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2537 -a ! -f $(ICON32PATH)/gvim.png; then \ 2538 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2539 fi 2540 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2541 -a ! -f $(ICON16PATH)/gvim.png; then \ 2542 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2543 fi 2544 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2545 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2546 $(SCRIPTSOURCE)/gvim.desktop \ 2547 $(DESKTOPPATH); \ 2548 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2549 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2550 fi \ 2551 fi 2552 2553$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2554 @echo Runtime files not found. 2555 @echo You need to unpack the runtime archive before running "make install". 2556 test -f error 2557 2558$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2559 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2560 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2561 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2562 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2563 $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_PLUG): 2564 $(MKDIR_P) $@ 2565 -chmod $(DIRMOD) $@ 2566 2567# create links from various names to vim. This is only done when the links 2568# (or executables with the same name) don't exist yet. 2569installlinks: $(GUI_TARGETS) \ 2570 $(DEST_BIN)/$(EXTARGET) \ 2571 $(DEST_BIN)/$(VIEWTARGET) \ 2572 $(DEST_BIN)/$(RVIMTARGET) \ 2573 $(DEST_BIN)/$(RVIEWTARGET) \ 2574 $(INSTALLVIMDIFF) 2575 2576installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2577 $(DEST_BIN)/$(GVIEWTARGET) \ 2578 $(DEST_BIN)/$(RGVIMTARGET) \ 2579 $(DEST_BIN)/$(RGVIEWTARGET) \ 2580 $(DEST_BIN)/$(EVIMTARGET) \ 2581 $(DEST_BIN)/$(EVIEWTARGET) \ 2582 $(INSTALLGVIMDIFF) 2583 2584installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2585installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2586 2587$(DEST_BIN)/$(EXTARGET): 2588 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2589 2590$(DEST_BIN)/$(VIEWTARGET): 2591 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2592 2593$(DEST_BIN)/$(GVIMTARGET): 2594 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2595 2596$(DEST_BIN)/$(GVIEWTARGET): 2597 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2598 2599$(DEST_BIN)/$(RVIMTARGET): 2600 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2601 2602$(DEST_BIN)/$(RVIEWTARGET): 2603 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2604 2605$(DEST_BIN)/$(RGVIMTARGET): 2606 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2607 2608$(DEST_BIN)/$(RGVIEWTARGET): 2609 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2610 2611$(DEST_BIN)/$(VIMDIFFTARGET): 2612 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2613 2614$(DEST_BIN)/$(GVIMDIFFTARGET): 2615 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2616 2617$(DEST_BIN)/$(EVIMTARGET): 2618 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2619 2620$(DEST_BIN)/$(EVIEWTARGET): 2621 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2622 2623# Create links for the manual pages with various names to vim. This is only 2624# done when the links (or manpages with the same name) don't exist yet. 2625 2626INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2627 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2628 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2629 $(GVIMDIFFNAME) $(EVIEWNAME) 2630 2631installmanlinks: 2632 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2633 $(DEST_MAN) $(INSTALLMLARGS) 2634 2635uninstall: uninstall_runtime 2636 -rm -f $(DEST_BIN)/$(VIMTARGET) 2637 -rm -f $(DEST_BIN)/vimtutor 2638 -rm -f $(DEST_BIN)/gvimtutor 2639 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2640 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2641 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2642 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2643 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2644 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2645 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2646 2647# Note: the "rmdir" will fail if any files were added after "make install" 2648uninstall_runtime: 2649 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2650 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA) "" $(INSTALLMANARGS) 2651 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_I) "" $(INSTALLMANARGS) 2652 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_U) "" $(INSTALLMANARGS) 2653 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE) "" $(INSTALLMANARGS) 2654 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_I) "" $(INSTALLMANARGS) 2655 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_U) "" $(INSTALLMANARGS) 2656 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2657 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2658 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2659 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2660 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2661 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2662 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2663 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2664 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2665 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2666 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2667 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2668 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2669 $(DEST_MAN) $(INSTALLMLARGS) 2670 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2671 $(DEST_MAN_DA) $(INSTALLMLARGS) 2672 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2673 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2674 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2675 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2676 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2677 $(DEST_MAN_DE) $(INSTALLMLARGS) 2678 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2679 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2680 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2681 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2682 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2683 $(DEST_MAN_FR) $(INSTALLMLARGS) 2684 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2685 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2686 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2687 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2688 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2689 $(DEST_MAN_IT) $(INSTALLMLARGS) 2690 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2691 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2692 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2693 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2694 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2695 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2696 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2697 $(DEST_MAN_PL) $(INSTALLMLARGS) 2698 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2699 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2700 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2701 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2702 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2703 $(DEST_MAN_RU) $(INSTALLMLARGS) 2704 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2705 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2706 -rm -f $(DEST_MAN)/xxd.1 2707 -rm -f $(DEST_MAN_DA)/xxd.1 $(DEST_MAN_DA_I)/xxd.1 $(DEST_MAN_DA_U)/xxd.1 2708 -rm -f $(DEST_MAN_DE)/xxd.1 $(DEST_MAN_DE_I)/xxd.1 $(DEST_MAN_DE_U)/xxd.1 2709 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2710 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2711 -rm -f $(DEST_MAN_JA_U)/xxd.1 2712 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2713 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2714 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2715 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2716 -rm -f $(SYS_RGB_FILE) 2717 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2718 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2719 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2720 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2721 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2722 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2723 -rm -f $(SYS_OPTWIN_FILE) 2724 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2725 -rm -rf $(DEST_COL)/tools 2726 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2727 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2728 -rm -rf $(DEST_MACRO) 2729 -rm -rf $(DEST_PACK) 2730 -rm -rf $(DEST_TUTOR) 2731 -rm -rf $(DEST_SPELL) 2732 -rm -rf $(DEST_TOOLS) 2733 -rm -rf $(DEST_LANG) 2734 -rm -rf $(DEST_KMAP) 2735 -rm -rf $(DEST_COMP) 2736 -rm -f $(DEST_PRINT)/*.ps 2737 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2738 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2739 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2740 -rm -f $(DEST_AUTO)/dist/*.vim $(DEST_AUTO)/xml/*.vim 2741 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2742 -rmdir $(DEST_FTP) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_AUTO) 2743 -rmdir $(DEST_PLUG) $(DEST_RT) 2744# This will fail when other Vim versions are installed, no worries. 2745 -rmdir $(DEST_VIM) 2746 2747# Clean up all the files that have been produced, except configure's. 2748# We support common typing mistakes for Juergen! :-) 2749clean celan: testclean 2750 -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2751 -rm -rf objects 2752 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2753 -rm -f conftest* *~ auto/link.sed 2754 -rm -f testdir/opt_test.vim 2755 -rm -f $(UNITTEST_TARGETS) 2756 -rm -f runtime pixmaps 2757 -rm -rf $(APPDIR) 2758 -rm -rf mzscheme_base.c 2759 if test -d $(PODIR); then \ 2760 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2761 fi 2762 2763# Make a shadow directory for compilation on another system or with different 2764# features. 2765SHADOWDIR = shadow 2766 2767shadow: runtime pixmaps 2768 $(MKDIR_P) $(SHADOWDIR) 2769 cd $(SHADOWDIR); ln -s ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../libvterm ../vimtutor ../gvimtutor ../install-sh ../Make_all.mak . 2770 mkdir $(SHADOWDIR)/auto 2771 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2772 $(MKDIR_P) $(SHADOWDIR)/po 2773 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/Makefile . 2774 cd $(SHADOWDIR); rm -f auto/link.sed 2775 cp Makefile configure $(SHADOWDIR) 2776 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2777 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2778 cp config.mk.dist $(SHADOWDIR) 2779 $(MKDIR_P) $(SHADOWDIR)/xxd 2780 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2781 $(MKDIR_P) $(SHADOWDIR)/xdiff 2782 cd $(SHADOWDIR)/xdiff; ln -s ../../xdiff/*.[ch] . 2783 if test -d $(RSRC_DIR); then \ 2784 cd $(SHADOWDIR); \ 2785 ln -s ../infplist.xml .; \ 2786 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2787 fi 2788 $(MKDIR_P) $(SHADOWDIR)/testdir 2789 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2790 ../../testdir/Make_all.mak \ 2791 ../../testdir/README.txt \ 2792 ../../testdir/*.in \ 2793 ../../testdir/*.vim \ 2794 ../../testdir/*.py \ 2795 ../../testdir/python* \ 2796 ../../testdir/pyxfile \ 2797 ../../testdir/sautest \ 2798 ../../testdir/samples \ 2799 ../../testdir/dumps \ 2800 ../../testdir/test83-tags? \ 2801 ../../testdir/*.ok . 2802 2803# Link needed for doing "make install" in a shadow directory. 2804runtime: 2805 -ln -s ../runtime . 2806 2807# Link needed for doing "make" using GTK in a shadow directory. 2808pixmaps: 2809 -ln -s ../pixmaps . 2810 2811# Update the synmenu.vim file with the latest Syntax menu. 2812# This is only needed when runtime/makemenu.vim was changed. 2813menu: ./vim ../runtime/makemenu.vim 2814 ./vim -u ../runtime/makemenu.vim 2815 2816# Start configure from scratch 2817scrub scratch: 2818 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2819 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2820 touch auto/config.h 2821 cp config.mk.dist auto/config.mk 2822 2823distclean: clean scratch 2824 -rm -f tags 2825 2826dist: distclean 2827 @echo 2828 @echo Making the distribution has to be done in the top directory 2829 2830mdepend: 2831 -@rm -f Makefile~ 2832 cp Makefile Makefile~ 2833 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2834 @for i in $(ALL_SRC) ; do \ 2835 echo "$$i" ; \ 2836 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2837 $(CPP) $$i |\ 2838 grep '^# .*"\./.*\.h"' |\ 2839 sort -t'"' -u +1 -2 |\ 2840 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2841 ` >> tmp_make ; \ 2842 done 2843 mv tmp_make Makefile 2844 2845depend: 2846 -@rm -f Makefile~ 2847 cp Makefile Makefile~ 2848 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2849 -for i in $(ALL_SRC); do echo $$i; \ 2850 $(CPP_DEPEND) $$i | \ 2851 sed -e 's+^\([^ ]*\.o\)+objects/\1+' -e 's+xdiff/\.\./++g' >> tmp_make; done 2852 mv tmp_make Makefile 2853 2854# Run lint. Clean up the *.ln files that are sometimes left behind. 2855lint: 2856 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2857 -rm -f *.ln 2858 2859# Check dosinst.c with lint. 2860lintinstall: 2861 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2862 -rm -f dosinst.ln 2863 2864########################################################################### 2865 2866.c.o: 2867 $(CCC) $< 2868 2869auto/if_perl.c: if_perl.xs 2870 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2871 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2872 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2873 2874auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2875 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2876 2877auto/pathdef.c: Makefile auto/config.mk 2878 -@echo creating $@ 2879 -@echo '/* pathdef.c */' > $@ 2880 -@echo '/* This file is automatically created by Makefile' >> $@ 2881 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2882 -@echo '#include "vim.h"' >> $@ 2883 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2884 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2885 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2886 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2887 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2888 -@if test -n "$(COMPILEDBY)"; then \ 2889 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2890 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2891 -@echo '";' >> $@ 2892 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2893 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2894 -@echo '";' >> $@ 2895 -@sh $(srcdir)/pathdef.sh 2896 2897GUI_GTK_RES_INPUTS = \ 2898 ../pixmaps/stock_vim_build_tags.png \ 2899 ../pixmaps/stock_vim_find_help.png \ 2900 ../pixmaps/stock_vim_save_all.png \ 2901 ../pixmaps/stock_vim_session_load.png \ 2902 ../pixmaps/stock_vim_session_new.png \ 2903 ../pixmaps/stock_vim_session_save.png \ 2904 ../pixmaps/stock_vim_shell.png \ 2905 ../pixmaps/stock_vim_window_maximize.png \ 2906 ../pixmaps/stock_vim_window_maximize_width.png \ 2907 ../pixmaps/stock_vim_window_minimize.png \ 2908 ../pixmaps/stock_vim_window_minimize_width.png \ 2909 ../pixmaps/stock_vim_window_split.png \ 2910 ../pixmaps/stock_vim_window_split_vertical.png 2911 2912auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2913 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2914auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2915 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2916 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2917 fi 2918 2919# All the object files are put in the "objects" directory. Since not all make 2920# commands understand putting object files in another directory, it must be 2921# specified for each file separately. 2922 2923objects: objects/.dirstamp 2924 2925objects/.dirstamp: 2926 $(MKDIR_P) objects 2927 touch objects/.dirstamp 2928 2929# All object files depend on the objects directory, so that parallel make 2930# works. Can't depend on the directory itself, its timestamp changes all the 2931# time. 2932$(ALL_OBJ): objects/.dirstamp 2933 2934objects/arabic.o: arabic.c 2935 $(CCC) -o $@ arabic.c 2936 2937objects/blob.o: blob.c 2938 $(CCC) -o $@ blob.c 2939 2940objects/blowfish.o: blowfish.c 2941 $(CCC) -o $@ blowfish.c 2942 2943objects/buffer.o: buffer.c 2944 $(CCC) -o $@ buffer.c 2945 2946objects/charset.o: charset.c 2947 $(CCC) -o $@ charset.c 2948 2949objects/crypt.o: crypt.c 2950 $(CCC) -o $@ crypt.c 2951 2952objects/crypt_zip.o: crypt_zip.c 2953 $(CCC) -o $@ crypt_zip.c 2954 2955objects/dict.o: dict.c 2956 $(CCC) -o $@ dict.c 2957 2958objects/diff.o: diff.c $(XDIFF_INCL) 2959 $(CCC) -o $@ diff.c 2960 2961objects/digraph.o: digraph.c 2962 $(CCC) -o $@ digraph.c 2963 2964objects/edit.o: edit.c 2965 $(CCC) -o $@ edit.c 2966 2967objects/eval.o: eval.c 2968 $(CCC) -o $@ eval.c 2969 2970objects/evalfunc.o: evalfunc.c 2971 $(CCC) -o $@ evalfunc.c 2972 2973objects/ex_cmds.o: ex_cmds.c 2974 $(CCC) -o $@ ex_cmds.c 2975 2976objects/ex_cmds2.o: ex_cmds2.c 2977 $(CCC) -o $@ ex_cmds2.c 2978 2979objects/ex_docmd.o: ex_docmd.c 2980 $(CCC) -o $@ ex_docmd.c 2981 2982objects/ex_eval.o: ex_eval.c 2983 $(CCC) -o $@ ex_eval.c 2984 2985objects/ex_getln.o: ex_getln.c 2986 $(CCC) -o $@ ex_getln.c 2987 2988objects/farsi.o: farsi.c 2989 $(CCC) -o $@ farsi.c 2990 2991objects/fileio.o: fileio.c 2992 $(CCC) -o $@ fileio.c 2993 2994objects/fold.o: fold.c 2995 $(CCC) -o $@ fold.c 2996 2997objects/getchar.o: getchar.c 2998 $(CCC) -o $@ getchar.c 2999 3000objects/hardcopy.o: hardcopy.c 3001 $(CCC) -o $@ hardcopy.c 3002 3003objects/hashtab.o: hashtab.c 3004 $(CCC) -o $@ hashtab.c 3005 3006objects/gui.o: gui.c 3007 $(CCC) -o $@ gui.c 3008 3009objects/gui_at_fs.o: gui_at_fs.c 3010 $(CCC) -o $@ gui_at_fs.c 3011 3012objects/gui_at_sb.o: gui_at_sb.c 3013 $(CCC) -o $@ gui_at_sb.c 3014 3015objects/gui_athena.o: gui_athena.c 3016 $(CCC) -o $@ gui_athena.c 3017 3018objects/beval.o: beval.c 3019 $(CCC) -o $@ beval.c 3020 3021objects/gui_beval.o: gui_beval.c 3022 $(CCC) -o $@ gui_beval.c 3023 3024objects/gui_gtk.o: gui_gtk.c 3025 $(CCC) -o $@ gui_gtk.c 3026 3027objects/gui_gtk_f.o: gui_gtk_f.c 3028 $(CCC) -o $@ gui_gtk_f.c 3029 3030objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3031 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3032 3033objects/gui_gtk_x11.o: gui_gtk_x11.c 3034 $(CCC) -o $@ gui_gtk_x11.c 3035 3036objects/gui_motif.o: gui_motif.c 3037 $(CCC) -o $@ gui_motif.c 3038 3039objects/gui_xmdlg.o: gui_xmdlg.c 3040 $(CCC) -o $@ gui_xmdlg.c 3041 3042objects/gui_xmebw.o: gui_xmebw.c 3043 $(CCC) -o $@ gui_xmebw.c 3044 3045objects/gui_x11.o: gui_x11.c 3046 $(CCC) -o $@ gui_x11.c 3047 3048objects/gui_photon.o: gui_photon.c 3049 $(CCC) -o $@ gui_photon.c 3050 3051objects/gui_mac.o: gui_mac.c 3052 $(CCC) -o $@ gui_mac.c 3053 3054objects/hangulin.o: hangulin.c 3055 $(CCC) -o $@ hangulin.c 3056 3057objects/if_cscope.o: if_cscope.c 3058 $(CCC) -o $@ if_cscope.c 3059 3060objects/if_xcmdsrv.o: if_xcmdsrv.c 3061 $(CCC) -o $@ if_xcmdsrv.c 3062 3063objects/if_lua.o: if_lua.c 3064 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3065 3066objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3067 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3068 3069mzscheme_base.c: 3070 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3071 3072objects/if_perl.o: auto/if_perl.c 3073 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3074 3075objects/if_perlsfio.o: if_perlsfio.c 3076 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3077 3078objects/if_python.o: if_python.c if_py_both.h 3079 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3080 3081objects/if_python3.o: if_python3.c if_py_both.h 3082 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3083 3084objects/if_ruby.o: if_ruby.c 3085 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3086 3087objects/if_tcl.o: if_tcl.c 3088 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3089 3090objects/json.o: json.c 3091 $(CCC) -o $@ json.c 3092 3093objects/json_test.o: json_test.c 3094 $(CCC) -o $@ json_test.c 3095 3096objects/kword_test.o: kword_test.c 3097 $(CCC) -o $@ kword_test.c 3098 3099objects/list.o: list.c 3100 $(CCC) -o $@ list.c 3101 3102objects/main.o: main.c 3103 $(CCC) -o $@ main.c 3104 3105objects/mark.o: mark.c 3106 $(CCC) -o $@ mark.c 3107 3108objects/memfile.o: memfile.c 3109 $(CCC) -o $@ memfile.c 3110 3111objects/memfile_test.o: memfile_test.c 3112 $(CCC) -o $@ memfile_test.c 3113 3114objects/memline.o: memline.c 3115 $(CCC) -o $@ memline.c 3116 3117objects/menu.o: menu.c 3118 $(CCC) -o $@ menu.c 3119 3120objects/message.o: message.c 3121 $(CCC) -o $@ message.c 3122 3123objects/message_test.o: message_test.c 3124 $(CCC) -o $@ message_test.c 3125 3126objects/misc1.o: misc1.c 3127 $(CCC) -o $@ misc1.c 3128 3129objects/misc2.o: misc2.c 3130 $(CCC) -o $@ misc2.c 3131 3132objects/move.o: move.c 3133 $(CCC) -o $@ move.c 3134 3135objects/mbyte.o: mbyte.c 3136 $(CCC) -o $@ mbyte.c 3137 3138objects/normal.o: normal.c 3139 $(CCC) -o $@ normal.c 3140 3141objects/ops.o: ops.c 3142 $(CCC) -o $@ ops.c 3143 3144objects/option.o: option.c 3145 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3146 3147objects/os_beos.o: os_beos.c 3148 $(CCC) -o $@ os_beos.c 3149 3150objects/os_qnx.o: os_qnx.c 3151 $(CCC) -o $@ os_qnx.c 3152 3153objects/os_macosx.o: os_macosx.m 3154 $(CCC) -o $@ os_macosx.m 3155 3156objects/os_mac_conv.o: os_mac_conv.c 3157 $(CCC) -o $@ os_mac_conv.c 3158 3159objects/os_unix.o: os_unix.c 3160 $(CCC) -o $@ os_unix.c 3161 3162objects/os_mswin.o: os_mswin.c 3163 $(CCC) -o $@ os_mswin.c 3164 3165objects/winclip.o: winclip.c 3166 $(CCC) -o $@ winclip.c 3167 3168objects/pathdef.o: auto/pathdef.c 3169 $(CCC) -o $@ auto/pathdef.c 3170 3171objects/popupmnu.o: popupmnu.c 3172 $(CCC) -o $@ popupmnu.c 3173 3174objects/pty.o: pty.c 3175 $(CCC) -o $@ pty.c 3176 3177objects/quickfix.o: quickfix.c 3178 $(CCC) -o $@ quickfix.c 3179 3180objects/regexp.o: regexp.c regexp_nfa.c 3181 $(CCC) -o $@ regexp.c 3182 3183objects/screen.o: screen.c 3184 $(CCC) -o $@ screen.c 3185 3186objects/search.o: search.c 3187 $(CCC) -o $@ search.c 3188 3189objects/sha256.o: sha256.c 3190 $(CCC) -o $@ sha256.c 3191 3192objects/sign.o: sign.c 3193 $(CCC) -o $@ sign.c 3194 3195objects/spell.o: spell.c 3196 $(CCC) -o $@ spell.c 3197 3198objects/spellfile.o: spellfile.c 3199 $(CCC) -o $@ spellfile.c 3200 3201objects/syntax.o: syntax.c 3202 $(CCC) -o $@ syntax.c 3203 3204objects/tag.o: tag.c 3205 $(CCC) -o $@ tag.c 3206 3207objects/term.o: term.c 3208 $(CCC) -o $@ term.c 3209 3210objects/terminal.o: terminal.c $(TERM_DEPS) 3211 $(CCC) -o $@ terminal.c 3212 3213objects/textprop.o: textprop.c 3214 $(CCC) -o $@ textprop.c 3215 3216objects/ui.o: ui.c 3217 $(CCC) -o $@ ui.c 3218 3219objects/undo.o: undo.c 3220 $(CCC) -o $@ undo.c 3221 3222objects/userfunc.o: userfunc.c 3223 $(CCC) -o $@ userfunc.c 3224 3225objects/window.o: window.c 3226 $(CCC) -o $@ window.c 3227 3228objects/netbeans.o: netbeans.c 3229 $(CCC) -o $@ netbeans.c 3230 3231objects/channel.o: channel.c 3232 $(CCC) -o $@ channel.c 3233 3234Makefile: 3235 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3236 3237CCCTERM = $(CCC_NF) $(VTERM_CFLAGS) $(ALL_CFLAGS) -DINLINE="" \ 3238 -DVSNPRINTF=vim_vsnprintf \ 3239 -DIS_COMBINING_FUNCTION=utf_iscomposing_uint \ 3240 -DWCWIDTH_FUNCTION=utf_uint2cells 3241 3242objects/encoding.o: libvterm/src/encoding.c $(TERM_DEPS) 3243 $(CCCTERM) -o $@ libvterm/src/encoding.c 3244 3245objects/keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) 3246 $(CCCTERM) -o $@ libvterm/src/keyboard.c 3247 3248objects/mouse.o: libvterm/src/mouse.c $(TERM_DEPS) 3249 $(CCCTERM) -o $@ libvterm/src/mouse.c 3250 3251objects/parser.o: libvterm/src/parser.c $(TERM_DEPS) 3252 $(CCCTERM) -o $@ libvterm/src/parser.c 3253 3254objects/pen.o: libvterm/src/pen.c $(TERM_DEPS) 3255 $(CCCTERM) -o $@ libvterm/src/pen.c 3256 3257objects/termscreen.o: libvterm/src/termscreen.c $(TERM_DEPS) 3258 $(CCCTERM) -o $@ libvterm/src/termscreen.c 3259 3260objects/state.o: libvterm/src/state.c $(TERM_DEPS) 3261 $(CCCTERM) -o $@ libvterm/src/state.c 3262 3263objects/unicode.o: libvterm/src/unicode.c $(TERM_DEPS) 3264 $(CCCTERM) -o $@ libvterm/src/unicode.c 3265 3266objects/vterm.o: libvterm/src/vterm.c $(TERM_DEPS) 3267 $(CCCTERM) -o $@ libvterm/src/vterm.c 3268 3269CCCDIFF = $(CCC_NF) $(ALL_CFLAGS) 3270 3271objects/xdiffi.o: xdiff/xdiffi.c $(XDIFF_INCL) 3272 $(CCCDIFF) -o $@ xdiff/xdiffi.c 3273 3274objects/xprepare.o: xdiff/xprepare.c $(XDIFF_INCL) 3275 $(CCCDIFF) -o $@ xdiff/xprepare.c 3276 3277objects/xutils.o: xdiff/xutils.c $(XDIFF_INCL) 3278 $(CCCDIFF) -o $@ xdiff/xutils.c 3279 3280objects/xemit.o: xdiff/xemit.c $(XDIFF_INCL) 3281 $(CCCDIFF) -o $@ xdiff/xemit.c 3282 3283objects/xhistogram.o: xdiff/xhistogram.c $(XDIFF_INCL) 3284 $(CCCDIFF) -o $@ xdiff/xhistogram.c 3285 3286objects/xpatience.o: xdiff/xpatience.c $(XDIFF_INCL) 3287 $(CCCDIFF) -o $@ xdiff/xpatience.c 3288 3289 3290############################################################################### 3291### MacOS X installation 3292### 3293### This installs a runnable Vim.app in $(prefix) 3294 3295REZ = /Developer/Tools/Rez 3296RESDIR = $(APPDIR)/Contents/Resources 3297VERSION = $(VIMMAJOR).$(VIMMINOR) 3298 3299### Common flags 3300M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3301 -DAPP_VER=$(VERSION) 3302 3303install_macosx: gui_bundle 3304# Remove the link to the runtime dir, don't want to copy all of that. 3305 -rm $(RESDIR)/vim/runtime 3306 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3307# Generate the help tags file now, it won't work with "make installruntime". 3308 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3309# Install the runtime files. Recursive! 3310 $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3311 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3312 VIMEXE=$$srcdir/$(VIMTARGET) \ 3313 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3314 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3315 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3316 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3317 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3318# Put the link back. 3319 ln -s `pwd`/../runtime $(RESDIR)/vim 3320# Copy rgb.txt, Mac doesn't always have X11 3321 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3322# TODO: Create the vimtutor and/or gvimtutor application. 3323 3324gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3325 bundle-language 3326 3327$(RESDIR): 3328 $(MKDIR_P) $@ 3329 3330bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3331# Make a link to the runtime directory, so that we can try out the executable 3332# without installing it. 3333 $(MKDIR_P) $(RESDIR)/vim 3334 -ln -s `pwd`/../runtime $(RESDIR)/vim 3335 3336bundle-executable: $(VIMTARGET) 3337 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3338 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3339 3340bundle-info: bundle-dir 3341 @echo "Creating PkgInfo" 3342 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3343 @echo "Creating Info.plist" 3344 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3345 3346bundle-resource: bundle-dir bundle-rsrc 3347 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3348 3349### Classic resources 3350# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3351# This file is also required for OS X Vim. 3352bundle-rsrc: os_mac.rsr.hqx 3353 @echo "Creating resource fork" 3354 python dehqx.py $< 3355 rm -f gui_mac.rsrc 3356 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3357 3358# po/Make_osx.pl says something about generating a Mac message file 3359# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3360# *really* be upset that Carbon Vim was not localised in 3361# Ukrainian? 3362# 3363#bundle-language: bundle-dir po/Make_osx.pl 3364# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3365bundle-language: bundle-dir 3366 3367$(APPDIR)/Contents: 3368 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3369 $(MKDIR_P) $(RESDIR)/English.lproj 3370 3371 3372############################################################################### 3373### (automatically generated by 'make depend') 3374### Dependencies: 3375objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3376 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3377 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3378 proto.h globals.h farsi.h arabic.h 3379objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3380 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3381 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3382 proto.h globals.h farsi.h arabic.h 3383objects/blob.o: blob.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3384 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3385 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3386 proto.h globals.h farsi.h arabic.h 3387objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3388 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3389 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3390 proto.h globals.h farsi.h arabic.h 3391objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3392 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3393 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3394 proto.h globals.h farsi.h arabic.h version.h 3395objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3396 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3397 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3398 proto.h globals.h farsi.h arabic.h 3399objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3400 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3401 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3402 proto.h globals.h farsi.h arabic.h 3403objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \ 3404 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3405 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3406 proto.h globals.h farsi.h arabic.h 3407objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3408 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3409 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3410 proto.h globals.h farsi.h arabic.h 3411objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3412 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3413 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3414 proto.h globals.h farsi.h arabic.h xdiff/xdiff.h vim.h 3415objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3416 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3417 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3418 proto.h globals.h farsi.h arabic.h 3419objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3420 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3421 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3422 proto.h globals.h farsi.h arabic.h 3423objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3424 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3425 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3426 proto.h globals.h farsi.h arabic.h version.h 3427objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3428 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3429 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3430 proto.h globals.h farsi.h arabic.h version.h 3431objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3432 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3433 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3434 proto.h globals.h farsi.h arabic.h version.h 3435objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3436 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3437 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3438 proto.h globals.h farsi.h arabic.h version.h 3439objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3440 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3441 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3442 proto.h globals.h farsi.h arabic.h ex_cmdidxs.h 3443objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3444 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3445 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3446 proto.h globals.h farsi.h arabic.h 3447objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3448 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3449 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3450 proto.h globals.h farsi.h arabic.h 3451objects/farsi.o: farsi.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3452 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3453 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3454 proto.h globals.h farsi.h arabic.h 3455objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3456 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3457 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3458 proto.h globals.h farsi.h arabic.h 3459objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3460 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3461 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3462 proto.h globals.h farsi.h arabic.h 3463objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3464 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3465 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3466 proto.h globals.h farsi.h arabic.h 3467objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3468 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3469 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3470 proto.h globals.h farsi.h arabic.h version.h 3471objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3472 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3473 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3474 proto.h globals.h farsi.h arabic.h 3475objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \ 3476 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3477 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3478 proto.h globals.h farsi.h arabic.h if_cscope.h 3479objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \ 3480 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3481 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3482 proto.h globals.h farsi.h arabic.h version.h 3483objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3484 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3485 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3486 proto.h globals.h farsi.h arabic.h 3487objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3488 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3489 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3490 proto.h globals.h farsi.h arabic.h 3491objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3492 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3493 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3494 proto.h globals.h farsi.h arabic.h 3495objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3496 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3497 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3498 proto.h globals.h farsi.h arabic.h 3499objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3500 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3501 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3502 proto.h globals.h farsi.h arabic.h 3503objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3504 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3505 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3506 proto.h globals.h farsi.h arabic.h 3507objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3508 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3509 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3510 proto.h globals.h farsi.h arabic.h 3511objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3512 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3513 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3514 proto.h globals.h farsi.h arabic.h 3515objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3516 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3517 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3518 proto.h globals.h farsi.h arabic.h version.h 3519objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3520 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3521 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3522 proto.h globals.h farsi.h arabic.h 3523objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3524 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3525 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3526 proto.h globals.h farsi.h arabic.h 3527objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3528 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3529 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3530 proto.h globals.h farsi.h arabic.h 3531objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3532 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3533 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3534 proto.h globals.h farsi.h arabic.h 3535objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3536 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3537 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3538 proto.h globals.h farsi.h arabic.h 3539objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3540 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3541 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3542 proto.h globals.h farsi.h arabic.h 3543objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3544 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3545 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3546 proto.h globals.h farsi.h arabic.h os_unixx.h 3547objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \ 3548 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3549 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3550 proto.h globals.h farsi.h arabic.h 3551objects/popupmnu.o: popupmnu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3552 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3553 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3554 proto.h globals.h farsi.h arabic.h 3555objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3556 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3557 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3558 proto.h globals.h farsi.h arabic.h 3559objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3560 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3561 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3562 proto.h globals.h farsi.h arabic.h 3563objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3564 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3565 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3566 proto.h globals.h farsi.h arabic.h regexp_nfa.c 3567objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3568 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3569 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3570 proto.h globals.h farsi.h arabic.h 3571objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3572 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3573 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3574 proto.h globals.h farsi.h arabic.h 3575objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3576 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3577 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3578 proto.h globals.h farsi.h arabic.h 3579objects/sign.o: sign.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3580 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3581 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3582 proto.h globals.h farsi.h arabic.h 3583objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3584 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3585 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3586 proto.h globals.h farsi.h arabic.h 3587objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \ 3588 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3589 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3590 proto.h globals.h farsi.h arabic.h 3591objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3592 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3593 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3594 proto.h globals.h farsi.h arabic.h 3595objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3596 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3597 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3598 proto.h globals.h farsi.h arabic.h 3599objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3600 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3601 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3602 proto.h globals.h farsi.h arabic.h libvterm/include/vterm.h \ 3603 libvterm/include/vterm_keycodes.h 3604objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3605 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3606 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3607 proto.h globals.h farsi.h arabic.h libvterm/include/vterm.h \ 3608 libvterm/include/vterm_keycodes.h 3609objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3610 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3611 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3612 proto.h globals.h farsi.h arabic.h 3613objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3614 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3615 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3616 proto.h globals.h farsi.h arabic.h 3617objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3618 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3619 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3620 proto.h globals.h farsi.h arabic.h 3621objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3622 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3623 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3624 proto.h globals.h farsi.h arabic.h 3625objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3626 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3627 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3628 proto.h globals.h farsi.h arabic.h version.h 3629objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3630 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3631 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3632 proto.h globals.h farsi.h arabic.h 3633objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3634 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3635 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3636 proto.h globals.h farsi.h arabic.h 3637objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3638 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3639 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3640 proto.h globals.h farsi.h arabic.h gui_gtk_f.h 3641objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \ 3642 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3643 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3644 proto.h globals.h farsi.h arabic.h gui_gtk_f.h 3645objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \ 3646 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3647 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3648 proto.h globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 3649 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 3650 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3651 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3652 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3653 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3654 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3655 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3656 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3657 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3658 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3659 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3660 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3661 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3662 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3663 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3664 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3665 ../pixmaps/tb_minwidth.xpm 3666objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \ 3667 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3668 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3669 proto.h globals.h farsi.h arabic.h 3670objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \ 3671 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3672 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3673 proto.h globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 3674objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \ 3675 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3676 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3677 proto.h globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 3678 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 3679 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 3680 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3681 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3682 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3683 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3684 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3685 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3686 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3687 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3688 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3689 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3690 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3691 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3692 ../pixmaps/tb_minwidth.xpm 3693objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \ 3694 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3695 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3696 proto.h globals.h farsi.h arabic.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3697 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3698objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3699 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3700 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3701 proto.h globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \ 3702 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3703objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \ 3704 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3705 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3706 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3707objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \ 3708 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3709 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3710 proto.h globals.h farsi.h arabic.h gui_at_sb.h 3711objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \ 3712 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3713 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3714 proto.h globals.h farsi.h arabic.h json.c 3715objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \ 3716 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3717 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3718 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h charset.c 3719objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \ 3720 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3721 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3722 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h memfile.c 3723objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \ 3724 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3725 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3726 ex_cmds.h spell.h proto.h globals.h farsi.h arabic.h message.c 3727objects/hangulin.o: hangulin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3728 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3729 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3730 proto.h globals.h farsi.h arabic.h 3731objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3732 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3733 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3734 proto.h globals.h farsi.h arabic.h 3735objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3736 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3737 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3738 proto.h globals.h farsi.h arabic.h if_mzsch.h 3739objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \ 3740 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3741 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3742 proto.h globals.h farsi.h arabic.h 3743objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \ 3744 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3745 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3746 proto.h globals.h farsi.h arabic.h 3747objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \ 3748 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3749 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3750 proto.h globals.h farsi.h arabic.h if_py_both.h 3751objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \ 3752 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3753 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3754 proto.h globals.h farsi.h arabic.h if_py_both.h 3755objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3756 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3757 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3758 proto.h globals.h farsi.h arabic.h 3759objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \ 3760 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3761 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3762 proto.h globals.h farsi.h arabic.h version.h 3763objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \ 3764 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3765 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3766 proto.h globals.h farsi.h arabic.h 3767objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3768 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3769 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3770 proto.h globals.h farsi.h arabic.h version.h 3771objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3772 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3773 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3774 proto.h globals.h farsi.h arabic.h 3775objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3776objects/encoding.o: libvterm/src/encoding.c libvterm/src/vterm_internal.h \ 3777 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3778 libvterm/src/encoding/DECdrawing.inc libvterm/src/encoding/uk.inc 3779objects/keyboard.o: libvterm/src/keyboard.c libvterm/src/vterm_internal.h \ 3780 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3781 libvterm/src/utf8.h 3782objects/mouse.o: libvterm/src/mouse.c libvterm/src/vterm_internal.h \ 3783 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3784 libvterm/src/utf8.h 3785objects/parser.o: libvterm/src/parser.c libvterm/src/vterm_internal.h \ 3786 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3787objects/pen.o: libvterm/src/pen.c libvterm/src/vterm_internal.h \ 3788 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3789objects/state.o: libvterm/src/state.c libvterm/src/vterm_internal.h \ 3790 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3791objects/termscreen.o: libvterm/src/termscreen.c libvterm/src/vterm_internal.h \ 3792 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3793 libvterm/src/rect.h libvterm/src/utf8.h 3794objects/unicode.o: libvterm/src/unicode.c libvterm/src/vterm_internal.h \ 3795 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3796objects/vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \ 3797 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3798 libvterm/src/utf8.h 3799objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \ 3800 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3801 auto/config.h feature.h os_unix.h \ 3802 auto/osdef.h ascii.h keymap.h term.h \ 3803 macros.h option.h beval.h proto/gui_beval.pro \ 3804 structs.h regexp.h gui.h alloc.h \ 3805 ex_cmds.h spell.h proto.h globals.h \ 3806 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3807 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3808objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \ 3809 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3810 auto/config.h feature.h os_unix.h \ 3811 auto/osdef.h ascii.h keymap.h term.h \ 3812 macros.h option.h beval.h proto/gui_beval.pro \ 3813 structs.h regexp.h gui.h alloc.h \ 3814 ex_cmds.h spell.h proto.h globals.h \ 3815 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3816 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3817objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \ 3818 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3819 auto/config.h feature.h os_unix.h \ 3820 auto/osdef.h ascii.h keymap.h term.h \ 3821 macros.h option.h beval.h proto/gui_beval.pro \ 3822 structs.h regexp.h gui.h alloc.h \ 3823 ex_cmds.h spell.h proto.h globals.h \ 3824 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3825 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3826objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \ 3827 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3828 auto/config.h feature.h os_unix.h \ 3829 auto/osdef.h ascii.h keymap.h term.h \ 3830 macros.h option.h beval.h proto/gui_beval.pro \ 3831 structs.h regexp.h gui.h alloc.h \ 3832 ex_cmds.h spell.h proto.h globals.h \ 3833 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3834 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3835objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \ 3836 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3837 auto/config.h feature.h os_unix.h \ 3838 auto/osdef.h ascii.h keymap.h term.h \ 3839 macros.h option.h beval.h proto/gui_beval.pro \ 3840 structs.h regexp.h gui.h alloc.h \ 3841 ex_cmds.h spell.h proto.h globals.h \ 3842 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3843 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3844objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \ 3845 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3846 auto/config.h feature.h os_unix.h \ 3847 auto/osdef.h ascii.h keymap.h term.h \ 3848 macros.h option.h beval.h proto/gui_beval.pro \ 3849 structs.h regexp.h gui.h alloc.h \ 3850 ex_cmds.h spell.h proto.h globals.h \ 3851 farsi.h arabic.h xdiff/xtypes.h xdiff/xutils.h \ 3852 xdiff/xprepare.h xdiff/xdiffi.h xdiff/xemit.h 3853
