1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installtutorbin only installs the Vim tutor program 134# make installtutor only installs the Vim tutor files 135# make installspell only installs the spell files 136# make installtools only installs xxd 137# If you install Vim, not to install for real but to prepare a package 138# or RPM, set DESTDIR to the root of the tree. 139# 140# 6. Use Vim until a new version comes out. {{{1 141# 142# 7. "make uninstall_runtime" {{{1 143# Will remove the runtime files for the current version. This is safe 144# to use while another version is being used, only version-specific 145# files will be deleted. 146# To remove the runtime files of another version: 147# make uninstall_runtime VIMRTDIR=/vim54 148# If you want to delete all installed files, use: 149# make uninstall 150# Note that this will delete files that have the same name for any 151# version, thus you might need to do a "make install" soon after this. 152# Be careful not to remove a version of Vim that is still being used! 153# To find out which files and directories will be deleted, use: 154# make -n uninstall 155# }}} 156# 157### This Makefile has been successfully tested on many systems. {{{ 158### Only the ones that require special options are mentioned here. 159### Check the (*) column for remarks, listed below. 160### Later code changes may cause small problems, otherwise Vim is supposed to 161### compile and run without problems. 162 163#system: configurations: version (*) tested by: 164#------------- ------------------------ ------- - ---------- 165#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 166#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 167#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 168#AIX 4.2.1 cc 5.2k (C) Will Fiveash 169#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 170#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 171#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 172#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 173#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 174#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 175#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 176#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 177#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 178#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 179#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 180#Irix 6.4 cc ? 5.0m (S) Rick Sayre 181#Irix 6.5 cc ? 6.0 (S) David Harrison 182#Irix 64 bit 4.5 (K) Jon Wright 183#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 184#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 185#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 186#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 188#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 189#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 190#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 191#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 192#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 193#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 194#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 195#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 197#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 198#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 199#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 200#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 201#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 202#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 203#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 204#Solaris with -lthread 5.5 (W) K. Nagano 205#Solaris gcc (b) Riccardo 206#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 207#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 208#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 209#Tandem/NSK (c) Matthew Woehlke 210#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 211#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 212#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 213# }}} 214 215# (*) Remarks: {{{ 216# 217# (1) Uncomment line below for shlicc2 218# (2) HPUX with compile problems or wrong digraphs, uncomment line below 219# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 220# And add "-lXpm" to MOTIF_LIBS2. 221# (4) For cc the optimizer must be disabled (use CFLAGS= after running 222# configure) (symptom: ":set termcap" output looks weird). 223# (5) Compiler may need extra argument, see below. 224# (6) See below for a few lines to uncomment 225# (7) See below for lines which enable the use of clcc 226# (8) Needs some EXTRA_LIBS, search for Unisys below 227# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 228# (A) May need EXTRA_LIBS, see below 229# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 230# (C) Force the use of curses instead of termcap, see below. 231# (D) Uncomment lines below for QNX 232# (E) You might want to use termlib instead of termcap, see below. 233# (F) See below for instructions. 234# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 235# Sun cursus library instead. 236# (H) See line for EXTRA_LIBS below. 237# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 238# (J) If you get undefined symbols, see below for a solution. 239# (K) See lines to uncomment below for machines with 64 bit pointers. 240# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 241# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 242# characters instead of one). 243# (N) SCO with decmouse. 244# (O) LynxOS needs EXTRA_LIBS, see below. 245# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 246# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 247# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 248# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 249# (T) See ../doc/os_beos.txt. 250# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 251# detection, since the configure script runs into an error when it 252# detects Python (probably because of the bash shell). 253# (V) See lines to uncomment below. 254# (X) Need to use the .include "auto/config.mk" line below 255# (Y) See line with c89 below 256# (Z) See lines with cc or c89 below 257# (a) See line with EXTRA_LIBS below. 258# (b) When using gcc with the Solaris linker, make sure you don't use GNU 259# strip, otherwise the binary may not run: "Cannot find ELF". 260# (c) Add -lfloss to EXTRA_LIBS, see below. 261# (x) When you get warnings for precompiled header files, run 262# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 263# }}} 264 265 266#DO NOT CHANGE the next line, we need it for configure to find the compiler 267#instead of using the default from the "make" program. 268#Use a line further down to change the value for CC. 269CC= 270 271# Change and use these defines if configure cannot find your Motif stuff. 272# Unfortunately there is no "standard" location for Motif. {{{ 273# These defines can contain a single directory (recommended) or a list of 274# directories (for when you are working with several systems). The LAST 275# directory that exists is used. 276# When changed, run "make reconfig" next! 277#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 278#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 279### Use these two lines for Infomagic Motif (3) 280#GUI_INC_LOC = -I/usr/X11R6/include 281#GUI_LIB_LOC = -L/usr/X11R6/lib 282# }}} 283 284######################## auto/config.mk ######################## {{{1 285# At this position auto/config.mk is included. When starting from the 286# distribution it is almost empty. After running auto/configure it contains 287# settings that have been discovered for your system. Settings below this 288# include override settings in auto/config.mk! 289 290# Note: if auto/config.mk is lost somehow (e.g., because configure was 291# interrupted), create an empty auto/config.mk file and do "make config". 292 293# (X) How to include auto/config.mk depends on the version of "make" you have, 294# if the current choice doesn't work, try the other one. 295 296include auto/config.mk 297#.include "auto/config.mk" 298CClink = $(CC) 299 300#}}} 301 302# Include the configuration choices first, so we can override everything 303# below. As shipped, this file contains a target that causes to run 304# configure. Once configure was run, this file contains a list of 305# make variables with predefined values instead. Thus any second invocation 306# of make, will build Vim. 307 308# CONFIGURE - configure arguments {{{1 309# You can give a lot of options to configure. 310# Change this to your desire and do 'make config' afterwards 311 312# examples (can only use one!): 313#CONF_ARGS = --exec-prefix=/usr 314#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 315#CONF_ARGS = --with-global-runtime=/etc/vim 316#CONF_ARGS = --with-local-dir=/usr/share 317#CONF_ARGS = --without-local-dir 318 319# Use this one if you distribute a modified version of Vim. 320#CONF_ARGS = --with-modified-by="John Doe" 321 322# GUI - For creating Vim with GUI (gvim) (B) 323# Uncomment this line when you don't want to get the GUI version, although you 324# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 325# at all. 326#CONF_OPT_GUI = --disable-gui 327 328# Uncomment one of these lines if you have that GUI but don't want to use it. 329# The automatic check will use another one that can be found. 330# Gnome is disabled by default, it may cause trouble. 331#CONF_OPT_GUI = --disable-gtk2-check 332#CONF_OPT_GUI = --enable-gnome2-check 333#CONF_OPT_GUI = --disable-motif-check 334#CONF_OPT_GUI = --disable-athena-check 335#CONF_OPT_GUI = --disable-nextaw-check 336 337# Uncomment one of these lines to select a specific GUI to use. 338# When using "yes" or nothing, configure will use the first one found: GTK+, 339# Motif or Athena. 340# 341# GTK versions that are known not to work 100% are rejected. 342# Use "--disable-gtktest" to accept them anyway. 343# Only GTK 2 is supported, for GTK 1 use Vim 7.2. 344# 345# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 346# is used then GNOME will automatically be used if it is found. If you have 347# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 348# --enable-gui=gtk or leave out --enable-gnome-check. 349# 350# If the selected GUI isn't found, the GUI is disabled automatically 351#CONF_OPT_GUI = --enable-gui=gtk2 352#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 353#CONF_OPT_GUI = --enable-gui=gnome2 354#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 355#CONF_OPT_GUI = --enable-gui=motif 356#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 357#CONF_OPT_GUI = --enable-gui=athena 358#CONF_OPT_GUI = --enable-gui=nextaw 359 360# DARWIN - detecting Mac OS X 361# Uncomment this line when you want to compile a Unix version of Vim on 362# Darwin. None of the Mac specific options or files will be used. 363#CONF_OPT_DARWIN = --disable-darwin 364 365# Select the architecture supported. Default is to build for the current 366# platform. Use "both" for a universal binary. That probably doesn't work 367# when including Perl, Python, etc. 368#CONF_OPT_DARWIN = --with-mac-arch=i386 369#CONF_OPT_DARWIN = --with-mac-arch=ppc 370#CONF_OPT_DARWIN = --with-mac-arch=both 371 372# LUA 373# Uncomment this when you want to include the Lua interface. 374#CONF_OPT_LUA = --enable-luainterp 375# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 376#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 377 378# MZSCHEME 379# Uncomment this when you want to include the MzScheme interface. 380#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 381# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 382#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 383#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 384#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 385 386# PERL 387# Uncomment this when you want to include the Perl interface. 388# The Perl option sometimes causes problems, because it adds extra flags 389# to the command line. If you see strange flags during compilation, check in 390# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 391# the next line. 392# When you get an error for a missing "perl.exp" file, try creating an emtpy 393# one: "touch perl.exp". 394# This requires at least "small" features, "tiny" doesn't work. 395#CONF_OPT_PERL = --enable-perlinterp 396 397# PYTHON 398# Uncomment this when you want to include the Python interface. 399# NOTE: This may cause threading to be enabled, which has side effects (such 400# as using different libraries and debugging becomes more difficult). 401# NOTE: Using this together with Perl may cause a crash in initialization. 402# For Python3 support make a symbolic link in /usr/local/bin: 403# ln -s python3 python3.1 404# If both python2.x and python3.x are enabled then the linking will be via 405# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 406#CONF_OPT_PYTHON = --enable-pythoninterp 407#CONF_OPT_PYTHON3 = --enable-python3interp 408 409# RUBY 410# Uncomment this when you want to include the Ruby interface. 411# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 412#CONF_OPT_RUBY = --enable-rubyinterp 413#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 414 415# TCL 416# Uncomment this when you want to include the Tcl interface. 417#CONF_OPT_TCL = --enable-tclinterp 418#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 419 420# CSCOPE 421# Uncomment this when you want to include the Cscope interface. 422#CONF_OPT_CSCOPE = --enable-cscope 423 424# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 425#CONF_OPT_WORKSHOP = --enable-workshop 426 427# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 428# Motif version must have XPM libraries (see |workshop-xpm|). 429# Uncomment this when you do not want the netbeans interface. 430#CONF_OPT_NETBEANS = --disable-netbeans 431 432# SNIFF - Include support for SNiFF+. 433#CONF_OPT_SNIFF = --enable-sniff 434 435# MULTIBYTE - To edit multi-byte characters. 436# Uncomment this when you want to edit a multibyte language. 437# It's automatically enabled with big features or IME support. 438# Note: Compile on a machine where setlocale() actually works, otherwise the 439# configure tests may fail. 440#CONF_OPT_MULTIBYTE = --enable-multibyte 441 442# NLS - National Language Support 443# Uncomment this when you do not want to support translated messages, even 444# though configure can find support for it. 445#CONF_OPT_NLS = --disable-nls 446 447# XIM - X Input Method. Special character input support for X11 (Chinese, 448# Japanese, special symbols, etc). Also needed for dead-key support. 449# When omitted it's automatically enabled for the X-windows GUI. 450# HANGUL - Input Hangul (Korean) language using internal routines. 451# Uncomment one of these when you want to input a multibyte language. 452#CONF_OPT_INPUT = --enable-xim 453#CONF_OPT_INPUT = --disable-xim 454#CONF_OPT_INPUT = --enable-hangulinput 455 456# FONTSET - X fontset support for output of languages with many characters. 457# Uncomment this when you want to output a multibyte language. 458#CONF_OPT_OUTPUT = --enable-fontset 459 460# ACL - Uncomment this when you do not want to include ACL support, even 461# though your system does support it. E.g., when it's buggy. 462#CONF_OPT_ACL = --disable-acl 463 464# gpm - For mouse support on Linux console via gpm 465# Uncomment this when you do not want to include gpm support, even 466# though you have gpm libraries and includes. 467#CONF_OPT_GPM = --disable-gpm 468 469# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 470# Uncomment this when you do not want do include sysmouse support, even 471# though you have /dev/sysmouse and includes. 472#CONF_OPT_SYSMOUSE = --disable-sysmouse 473 474# FEATURES - For creating Vim with more or less features 475# Uncomment one of these lines when you want to include few to many features. 476# The default is "normal". 477#CONF_OPT_FEAT = --with-features=tiny 478#CONF_OPT_FEAT = --with-features=small 479#CONF_OPT_FEAT = --with-features=normal 480#CONF_OPT_FEAT = --with-features=big 481#CONF_OPT_FEAT = --with-features=huge 482 483# COMPILED BY - For including a specific e-mail address for ":version". 484#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 485 486# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 487# (otherwise Vim configure will try to include xterm titlebar access) 488# Also disable the GUI above, otherwise it will be included anyway. 489# When both GUI and X11 have been disabled this may save about 15% of the 490# code and make Vim startup quicker. 491#CONF_OPT_X = --without-x 492 493# X WINDOWS DIRECTORY - specify X directories 494# If configure can't find you X stuff, or if you have multiple X11 derivatives 495# installed, you may wish to specify which one to use. 496# Select nothing to let configure choose. 497# This here selects openwin (as found on sun). 498#XROOT = /usr/openwin 499#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 500 501# X11 Session Management Protocol support 502# Vim will try to use XSMP to catch the user logging out if there are unsaved 503# files. Uncomment this line to disable that (it prevents vim trying to open 504# communications with the session manager). 505#CONF_OPT_XSMP = --disable-xsmp 506 507# You may wish to include xsmp but use exclude xsmp-interact if the logout 508# XSMP functionality does not work well with your session-manager (at time of 509# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 510# applications after Vim has cancelled a logout (until Vim quits). This 511# *might* be the Vim code, but is more likely a bug in early GNOME-1. 512# This disables the dialog that asks you if you want to save files or not. 513#CONF_OPT_XSMP = --disable-xsmp-interact 514 515# COMPILER - Name of the compiler {{{1 516# The default from configure will mostly be fine, no need to change this, just 517# an example. If a compiler is defined here, configure will use it rather than 518# probing for one. It is dangerous to change this after configure was run. 519# Make will use your choice then -- but beware: Many things may change with 520# another compiler. It is wise to run 'make reconfig' to start all over 521# again. 522#CC = cc 523#CC = gcc 524 525# COMPILER FLAGS - change as you please. Either before running {{{1 526# configure or afterwards. For examples see below. 527# When using -g with some older versions of Linux you might get a 528# statically linked executable. 529# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 530#CFLAGS = -g 531#CFLAGS = -O 532 533# Optimization limits - depends on the compiler. Automatic check in configure 534# doesn't work very well, because many compilers only give a warning for 535# unrecognized arguments. 536#CFLAGS = -O -OPT:Olimit=2600 537#CFLAGS = -O -Olimit 2000 538#CFLAGS = -O -FOlimit,2000 539 540# Often used for GCC: mixed optimizing, lot of optimizing, debugging 541#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 542#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 543#CFLAGS = -g -Wall -Wmissing-prototypes 544#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 545#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 546#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 547 548# Use this with GCC to check for mistakes, unused arguments, etc. 549#CFLAGS = -g -Wall -Wextra -Wmissing-prototypes -Wunreachable-code -D_FORTIFY_SOURCE=1 -DU_DEBUG 550#CFLAGS = -g -O2 -Wall -Wextra -Wmissing-prototypes -D_FORTIFY_SOURCE=1 -DU_DEBUG 551#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 552#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 553 554# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 555# allocated memory (and makes every malloc()/free() very slow). 556# Electric Fence is free (search ftp sites). 557# You may want to set the EF_PROTECT_BELOW environment variable to check the 558# other side of allocated memory. 559# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 560# as root: sysctl -w vm.max_proc_mmap=30000 561#EXTRA_LIBS = /usr/local/lib/libefence.a 562 563# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 564#PURIFY = purify 565 566# NBDEBUG - debugging the netbeans interface. 567#EXTRA_DEFS = -DNBDEBUG 568 569# }}} 570 571# LINT - for running lint 572# For standard Unix lint 573LINT = lint 574LINT_OPTIONS = -beprxzF 575# For splint 576# It doesn't work well, crashes on include files and non-ascii characters. 577#LINT = splint 578#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 579 580# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 581# Might not work with GUI or Perl. 582# For unknown reasons adding "-lc" fixes a linking problem with GCC. That's 583# probably a bug in the "-pg" implementation. 584# Need to recompile everything after changing this: "make clean" "make". 585#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 586#PROFILE_LIBS = -pg 587#PROFILE_LIBS = -pg -lc 588 589# MEMORY LEAK DETECTION 590# Requires installing the ccmalloc library. 591# Configuration is in the .ccmalloc or ~/.ccmalloc file. 592# Doesn't work very well, since memory linked to from global variables 593# (in libraries) is also marked as leaked memory. 594#PROFILE_CFLAGS = -DEXITFREE 595#PROFILE_LIBS = -lccmalloc 596 597##################################################### 598### Specific systems, check if yours is listed! ### {{{ 599##################################################### 600 601### Uncomment things here only if the values chosen by configure are wrong. 602### It's better to adjust configure.in and "make autoconf", if you can! 603### Then send the required changes to configure.in to the bugs list. 604 605### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 606### 607#CC = shlicc2 608#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 609 610### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 611### The first probably works on all systems 612### The second should work a bit better on newer systems 613### The third should work a bit better on HPUX 11.11 614### Information provided by: Richard Allen <[email protected]> 615#CC = c89 -D_HPUX_SOURCE 616#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 617#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 618 619### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 620### when the default (ISO) digraphs look completely wrong. 621### After changing this do "touch digraph.c; make". 622#EXTRA_DEFS = -DHPUX_DIGRAPHS 623 624### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 625### is too small to compile many routines. It produces too much defining 626### and no space errors. 627### Uncomment the following to specify a larger macro definition table. 628#CFLAGS = -Wp,-H256000 629 630### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 631### libraries in /usr/lib instead of /lib (avoiding transition links). 632### Information provided by: David Green 633#XROOT = /usr 634#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 635#GUI_INC_LOC = -I/usr/include/Motif1.2 636#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 637 638### (5) AIX 4.1.4 with cc 639#CFLAGS = -O -qmaxmem=8192 640 641### AIX with c89 (Walter Briscoe) 642#CC = c89 643#CPPFLAGS = -D_ALL_SOURCE 644 645### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 646# needed to avoid a problem where strings.h gets included 647#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 648 649### (W) Solaris with multi-threaded libraries (-lthread): 650### If suspending doesn't work properly, try using this line: 651#EXTRA_DEFS = -D_REENTRANT 652 653### (7) Solaris 2.4/2.5 with Centerline compiler 654#CC = clcc 655#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 656#CFLAGS = -O 657 658### (9) Solaris 2.x with cc (SunPro), using Athena. 659### Only required for compiling gui_at_sb.c. 660### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 661### Use one of the lines (either Full ANSI or no ANSI at all) 662#CFLAGS = $(CFLAGS) -Xc 663#CFLAGS = $(CFLAGS) -Xs 664 665### Solaris 2.3 with X11 and specific cc 666#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 667 668### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 669#CC = /usr/ucb/cc 670#EXTRA_LIBS = -R/usr/ucblib 671 672### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 673# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 674#CC = cc 675#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 676#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 677#XPM_IPATH = -I$(XPM_DIR)/include 678#EXTRA_LIBS = $(XPM_LIB) 679#EXTRA_IPATHS = $(XPM_IPATH) 680#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 681 682### Solaris with workshop compilers: Vim is unstable when compiled with 683# "-fast". Use this instead. (Shea Martin) 684#CFLAGS = -x02 -xtarget=ultra 685 686### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 687#LDFLAGS = -lw -ldl -lXmu 688#GUI_LIB_LOC = -L/usr/local/lib 689 690### (8) Unisys 6035 (Glauber Ribeiro) 691#EXTRA_LIBS = -lnsl -lsocket -lgen 692 693### When builtin functions cause problems with gcc (for Sun 4.1.x) 694#CFLAGS = -O2 -Wall -traditional -Wno-implicit 695 696### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 697#EXTRA_DEFS = -DDOMAIN 698#CFLAGS= -O -A systype,bsd4.3 699 700### Coherent 4.2.10 on Intel 386 platform 701#EXTRA_DEFS = -Dvoid=int 702#EXTRA_LIBS = -lterm -lsocket 703 704### SCO 3.2, with different library name for terminfo 705#EXTRA_LIBS = -ltinfo 706 707### UTS2 for Amdahl UTS 2.1.x 708#EXTRA_DEFS = -DUTS2 709#EXTRA_LIBS = -lsocket 710 711### UTS4 for Amdahl UTS 4.x 712#EXTRA_DEFS = -DUTS4 -Xa 713 714### USL for Unix Systems Laboratories (SYSV 4.2) 715#EXTRA_DEFS = -DUSL 716 717### RISCos on MIPS without X11 718#EXTRA_DEFS = -DMIPS 719 720### RISCos on MIPS with X11 721#EXTRA_LIBS = -lsun 722 723### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 724#CC= gcc -D_POSIX_SOURCE 725#CFLAGS= -O2 726#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 727 728### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 729### Also use the CONF_TERM_LIB below! 730#EXTRA_LIBS = -lgen 731 732### (D) QNX (by G.F. Desrochers) 733#CFLAGS = -g -O -mf -4 734 735### (F) QNX (by John Oleynick) 736# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 737# CONF_OPT_X = --without-x. 738# 2. make config 739# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 740# have -ldir (does config find it somewhere?) and -ltermcap has at 741# least one problem so I use termlib.o instead. The problem with 742# termcap is that it segfaults if you call it with the name of 743# a non-existent terminal type. 744# 4. edit auto/config.h and add #define USE_TMPNAM 745# 5. add termlib.o to OBJ 746# 6. make 747 748### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 749#EXTRA_LIBS = -lgen 750 751### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 752#EXTRA_LIBS = -lgen -lnsl 753### For SINIX-Y this is needed for the right prototype of gettimeofday() 754#EXTRA_DEFS = -D_XPG_IV 755 756### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 757# Use both "-F O3" lines for optimization or the "-g" line for debugging 758#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 759#CFLAGS = -F O3 -DSINIXN 760#LDFLAGS = -F O3 761#CFLAGS = -g -DSINIXN 762 763### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 764#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 765#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 766 767### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 768#GUI_INC_LOC = -I/usr/include 769#GUI_LIB_LOC = -L/usr/lib 770#EXTRA_LIBS = -lgen 771 772### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 773#GUI_INC_LOC = -I/usr/necccs/include 774#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 775#XROOT = /usr/necccs 776#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 777#EXTRA_LIBS = -lsocket -lgen 778 779### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 780# Not needed for Irix 5.3, Ives Aerts reported 781#EXTRA_LIBS = -lmalloc -lc_s 782# Irix 4.0, when regexp and regcmp cannot be found when linking: 783#EXTRA_LIBS = -lmalloc -lc_s -lPW 784 785### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 786# Note: This newer option style is used with the MipsPro compilers ONLY if 787# you are compiling an "n32" or "64" ABI binary (use either a -n32 788# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 789# then the CFLAGS option format will be the typical style (i.e. 790# -Olimit 3000). 791#CFLAGS = -OPT:Olimit=3000 -O 792 793### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 794# compiler features! Beware, the optimization is EXTREMELY thorough 795# and takes quite a long time. 796# Note: See the note above. Here, the -mips3 option automatically 797# enables either the "n32" or "64" ABI, depending on what machine you 798# are compiling on (n32 is explicitly enabled here, just to make sure). 799#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 800#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 801 802### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 803### Suggested by Jon Wright <[email protected]>. 804### Tested on R8000 IRIX6.1 Power Indigo2. 805### Check /etc/compiler.defaults for your compiler settings. 806# either (for 64 bit pointers) uncomment the following line 807#GUI_LIB_LOC = -L/usr/lib64 808# then 809# 1) make config 810# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 811# 3) make 812# 813# or (for 32bit pointers) uncomment the following line 814#EXTRA_DEFS = -n32 815#GUI_LIB_LOC = -L/usr/lib32 816# then 817# 1) make config 818# 2) edit auto/config.mk, add -n32 to LDFLAGS 819# 3) make 820# 821#Alternatively: use -o32 instead of -n32. 822### 823 824### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 825### which is found by configure, doesn't work correctly. Symptom is the 826### error message "Termcap entry too long". Uncomment the next line. 827### On AIX 4.2.1 (and other versions probably), libtermcap is reported 828### not to display properly. 829### after changing this, you need to do "make reconfig". 830#CONF_TERM_LIB = --with-tlib=curses 831 832### (E) If you want to use termlib library instead of the automatically found 833### one. After changing this, you need to do "make reconfig". 834#CONF_TERM_LIB = --with-tlib=termlib 835 836### (a) ESIX V4.2 (Reinhard Wobst) 837#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 838 839### (c) Tandem/NSK (Matthew Woehlke) 840#EXTRA_LIBS = -lfloss 841 842### If you want to use ncurses library instead of the automatically found one 843### after changing this, you need to do "make reconfig". 844#CONF_TERM_LIB = --with-tlib=ncurses 845 846### For GCC on MSDOS, the ".exe" suffix will be added. 847#EXEEXT = .exe 848#LNKEXT = .exe 849 850### (O) For LynxOS 2.5.0, tested on PC. 851#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 852### For LynxOS 3.0.1, tested on PPC 853#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 854### For LynxOS 3.1.0, tested on PC 855#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 856 857 858### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 859### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 860#CFLAGS = -O -Qtarget=m88110compat 861#EXTRA_LIBS = -lgen 862 863##################### end of system specific lines ################### }}} 864 865### Names of the programs and targets {{{1 866VIMTARGET = $(VIMNAME)$(EXEEXT) 867EXTARGET = $(EXNAME)$(LNKEXT) 868VIEWTARGET = $(VIEWNAME)$(LNKEXT) 869GVIMNAME = g$(VIMNAME) 870GVIMTARGET = $(GVIMNAME)$(LNKEXT) 871GVIEWNAME = g$(VIEWNAME) 872GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 873RVIMNAME = r$(VIMNAME) 874RVIMTARGET = $(RVIMNAME)$(LNKEXT) 875RVIEWNAME = r$(VIEWNAME) 876RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 877RGVIMNAME = r$(GVIMNAME) 878RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 879RGVIEWNAME = r$(GVIEWNAME) 880RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 881VIMDIFFNAME = $(VIMNAME)diff 882GVIMDIFFNAME = g$(VIMDIFFNAME) 883VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 884GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 885EVIMNAME = e$(VIMNAME) 886EVIMTARGET = $(EVIMNAME)$(LNKEXT) 887EVIEWNAME = e$(VIEWNAME) 888EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 889 890### Names of the tools that are also made {{{1 891TOOLS = xxd/xxd$(EXEEXT) 892 893### Installation directories. The defaults come from configure. {{{1 894# 895### prefix the top directory for the data (default "/usr/local") 896# 897# Uncomment the next line to install Vim in your home directory. 898#prefix = $(HOME) 899 900### exec_prefix is the top directory for the executable (default $(prefix)) 901# 902# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 903#exec_prefix = /usr/machine 904 905### BINDIR dir for the executable (default "$(exec_prefix)/bin") 906### MANDIR dir for the manual pages (default "$(prefix)/man") 907### DATADIR dir for the other files (default "$(prefix)/lib" or 908# "$(prefix)/share") 909# They may be different when using different architectures for the 910# executable and a common directory for the other files. 911# 912# Uncomment the next line to install Vim in "/usr/bin" 913#BINDIR = /usr/bin 914# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 915#MANDIR = /usr/share/man 916# Uncomment the next line to install Vim help files in "/usr/share/vim" 917#DATADIR = /usr/share 918 919### DESTDIR root of the installation tree. This is prepended to the other 920# directories. This directory must exist. 921#DESTDIR = ~/pkg/vim 922 923### Directory of the man pages 924MAN1DIR = /man1 925 926### Vim version (adjusted by a script) 927VIMMAJOR = 7 928VIMMINOR = 3a 929 930### Location of Vim files (should not need to be changed, and {{{1 931### some things might not work when they are changed!) 932VIMDIR = /vim 933VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 934HELPSUBDIR = /doc 935COLSUBDIR = /colors 936SYNSUBDIR = /syntax 937INDSUBDIR = /indent 938AUTOSUBDIR = /autoload 939PLUGSUBDIR = /plugin 940FTPLUGSUBDIR = /ftplugin 941LANGSUBDIR = /lang 942COMPSUBDIR = /compiler 943KMAPSUBDIR = /keymap 944MACROSUBDIR = /macros 945TOOLSSUBDIR = /tools 946TUTORSUBDIR = /tutor 947SPELLSUBDIR = /spell 948PRINTSUBDIR = /print 949PODIR = po 950 951### VIMLOC common root of the Vim files (all versions) 952### VIMRTLOC common root of the runtime Vim files (this version) 953### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 954### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 955### HELPSUBLOC location for help files 956### COLSUBLOC location for colorscheme files 957### SYNSUBLOC location for syntax files 958### INDSUBLOC location for indent files 959### AUTOSUBLOC location for standard autoload files 960### PLUGSUBLOC location for standard plugin files 961### FTPLUGSUBLOC location for ftplugin files 962### LANGSUBLOC location for language files 963### COMPSUBLOC location for compiler files 964### KMAPSUBLOC location for keymap files 965### MACROSUBLOC location for macro files 966### TOOLSSUBLOC location for tools files 967### TUTORSUBLOC location for tutor files 968### SPELLSUBLOC location for spell files 969### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 970### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 971### You can override these if you want to install them somewhere else. 972### Edit feature.h for compile-time settings. 973VIMLOC = $(DATADIR)$(VIMDIR) 974VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 975VIMRCLOC = $(VIMLOC) 976HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 977COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 978SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 979INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 980AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 981PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 982FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 983LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 984COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 985KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 986MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 987TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 988TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 989SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 990PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 991SCRIPTLOC = $(VIMRTLOC) 992 993### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 994### the runtime directory is not below it. 995#VIMRUNTIMEDIR = $(VIMRTLOC) 996 997### Name of the evim file target. 998EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 999MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1000 1001### Name of the menu file target. 1002SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1003SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1004SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1005 1006### Name of the bugreport file target. 1007SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1008 1009### Name of the file type detection file target. 1010SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1011 1012### Name of the file type detection file target. 1013SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1014 1015### Name of the file type detection script file target. 1016SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1017 1018### Name of the ftplugin-on file target. 1019SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1020 1021### Name of the ftplugin-off file target. 1022SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1023 1024### Name of the indent-on file target. 1025SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1026 1027### Name of the indent-off file target. 1028SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1029 1030### Name of the option window script file target. 1031SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1032 1033# Program to install the program in the target directory. Could also be "mv". 1034INSTALL_PROG = cp 1035 1036# Program to install the data in the target directory. Cannot be "mv"! 1037INSTALL_DATA = cp 1038INSTALL_DATA_R = cp -r 1039 1040### Program to run on installed binary 1041#STRIP = strip 1042 1043### Permissions for binaries {{{1 1044BINMOD = 755 1045 1046### Permissions for man page 1047MANMOD = 644 1048 1049### Permissions for help files 1050HELPMOD = 644 1051 1052### Permissions for Perl and shell scripts 1053SCRIPTMOD = 755 1054 1055### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1056VIMSCRIPTMOD = 644 1057 1058### Permissions for all directories that are created 1059DIRMOD = 755 1060 1061### Permissions for all other files that are created 1062FILEMOD = 644 1063 1064# Where to copy the man and help files from 1065HELPSOURCE = ../runtime/doc 1066 1067# Where to copy the script files from (menu, bugreport) 1068SCRIPTSOURCE = ../runtime 1069 1070# Where to copy the colorscheme files from 1071COLSOURCE = ../runtime/colors 1072 1073# Where to copy the syntax files from 1074SYNSOURCE = ../runtime/syntax 1075 1076# Where to copy the indent files from 1077INDSOURCE = ../runtime/indent 1078 1079# Where to copy the standard plugin files from 1080AUTOSOURCE = ../runtime/autoload 1081 1082# Where to copy the standard plugin files from 1083PLUGSOURCE = ../runtime/plugin 1084 1085# Where to copy the ftplugin files from 1086FTPLUGSOURCE = ../runtime/ftplugin 1087 1088# Where to copy the macro files from 1089MACROSOURCE = ../runtime/macros 1090 1091# Where to copy the tools files from 1092TOOLSSOURCE = ../runtime/tools 1093 1094# Where to copy the tutor files from 1095TUTORSOURCE = ../runtime/tutor 1096 1097# Where to copy the spell files from 1098SPELLSOURCE = ../runtime/spell 1099 1100# Where to look for language specific files 1101LANGSOURCE = ../runtime/lang 1102 1103# Where to look for compiler files 1104COMPSOURCE = ../runtime/compiler 1105 1106# Where to look for keymap files 1107KMAPSOURCE = ../runtime/keymap 1108 1109# Where to look for print resource files 1110PRINTSOURCE = ../runtime/print 1111 1112# If you are using Linux, you might want to use this to make vim the 1113# default vi editor, it will create a link from vi to Vim when doing 1114# "make install". An existing file will be overwritten! 1115# When not using it, some make programs can't handle an undefined $(LINKIT). 1116#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1117LINKIT = @echo >/dev/null 1118 1119### 1120### GRAPHICAL USER INTERFACE (GUI). {{{1 1121### 'configure --enable-gui' can enable one of these for you if you did set 1122### a corresponding CONF_OPT_GUI above and have X11. 1123### Override configures choice by uncommenting all the following lines. 1124### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1125### for enabling the Athena or Motif GUI. 1126#GUI_SRC = $(NONE_SRC) 1127#GUI_OBJ = $(NONE_OBJ) 1128#GUI_DEFS = $(NONE_DEFS) 1129#GUI_IPATH = $(NONE_IPATH) 1130#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1131#GUI_LIBS1 = $(NONE_LIBS1) 1132#GUI_LIBS2 = $(NONE_LIBS2) 1133#GUI_INSTALL = $(NONE_INSTALL) 1134#GUI_TARGETS = $(NONE_TARGETS) 1135#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1136#GUI_TESTTARGET = $(NONE_TESTTARGET) 1137#GUI_BUNDLE = $(NONE_BUNDLE) 1138 1139# Without a GUI install the normal way. 1140NONE_INSTALL = install_normal 1141 1142### GTK GUI 1143GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1144 gui_beval.c 1145GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1146 objects/pty.o objects/gui_gtk_f.o \ 1147 objects/gui_beval.o 1148GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1149GTK_IPATH = $(GUI_INC_LOC) 1150GTK_LIBS_DIR = $(GUI_LIB_LOC) 1151GTK_LIBS1 = 1152GTK_LIBS2 = $(GTK_LIBNAME) 1153GTK_INSTALL = install_normal install_gui_extra 1154GTK_TARGETS = installglinks 1155GTK_MAN_TARGETS = yes 1156GTK_TESTTARGET = gui 1157GTK_BUNDLE = 1158 1159### Motif GUI 1160MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1161 gui_xmdlg.c gui_xmebw.c 1162MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1163 objects/pty.o objects/gui_beval.o \ 1164 objects/gui_xmdlg.o objects/gui_xmebw.o 1165MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1166MOTIF_IPATH = $(GUI_INC_LOC) 1167MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1168MOTIF_LIBS1 = 1169MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1170MOTIF_INSTALL = install_normal install_gui_extra 1171MOTIF_TARGETS = installglinks 1172MOTIF_MAN_TARGETS = yes 1173MOTIF_TESTTARGET = gui 1174MOTIF_BUNDLE = 1175 1176### Athena GUI 1177### Use Xaw3d to make the menus look a little bit nicer 1178#XAW_LIB = -lXaw3d 1179XAW_LIB = -lXaw 1180 1181### When using Xaw3d, uncomment/comment the following lines to also get the 1182### scrollbars from Xaw3d. 1183#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1184#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1185# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1186#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1187# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1188# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1189ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1190 gui_at_sb.c gui_at_fs.c 1191ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1192 objects/pty.o objects/gui_beval.o \ 1193 objects/gui_at_sb.o objects/gui_at_fs.o 1194ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1195 1196ATHENA_IPATH = $(GUI_INC_LOC) 1197ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1198ATHENA_LIBS1 = $(XAW_LIB) 1199ATHENA_LIBS2 = -lXt 1200ATHENA_INSTALL = install_normal install_gui_extra 1201ATHENA_TARGETS = installglinks 1202ATHENA_MAN_TARGETS = yes 1203ATHENA_TESTTARGET = gui 1204ATHENA_BUNDLE = 1205 1206### neXtaw GUI 1207NEXTAW_LIB = -lneXtaw 1208 1209NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1210NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1211 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1212NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1213 1214NEXTAW_IPATH = $(GUI_INC_LOC) 1215NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1216NEXTAW_LIBS1 = $(NEXTAW_LIB) 1217NEXTAW_LIBS2 = -lXt 1218NEXTAW_INSTALL = install_normal install_gui_extra 1219NEXTAW_TARGETS = installglinks 1220NEXTAW_MAN_TARGETS = yes 1221NEXTAW_TESTTARGET = gui 1222NEXTAW_BUNDLE = 1223 1224### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1225# errors: ld: Undefined symbol 1226# _get_wmShellWidgetClass 1227# _get_applicationShellWidgetClass 1228# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1229# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1230#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1231# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1232# too: 1233#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1234 1235# PHOTON GUI 1236PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1237PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1238PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1239PHOTONGUI_IPATH = 1240PHOTONGUI_LIBS_DIR = 1241PHOTONGUI_LIBS1 = -lph -lphexlib 1242PHOTONGUI_LIBS2 = 1243PHOTONGUI_INSTALL = install_normal install_gui_extra 1244PHOTONGUI_TARGETS = installglinks 1245PHOTONGUI_MAN_TARGETS = yes 1246PHOTONGUI_TESTTARGET = gui 1247PHOTONGUI_BUNDLE = 1248 1249# CARBON GUI 1250CARBONGUI_SRC = gui.c gui_mac.c 1251CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1252CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1253 -Wall -Wno-unknown-pragmas \ 1254 -mdynamic-no-pic -pipe 1255CARBONGUI_IPATH = -I. -Iproto 1256CARBONGUI_LIBS_DIR = 1257CARBONGUI_LIBS1 = -framework Carbon 1258CARBONGUI_LIBS2 = 1259CARBONGUI_INSTALL = install_macosx 1260CARBONGUI_TARGETS = 1261CARBONGUI_MAN_TARGETS = 1262CARBONGUI_TESTTARGET = gui 1263CARBONGUI_BUNDLE = gui_bundle 1264APPDIR = $(VIMNAME).app 1265CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1266 1267# All GUI files 1268ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1269ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1270 1271# }}} 1272 1273### Command to create dependencies based on #include "..." 1274### prototype headers are ignored due to -DPROTO, system 1275### headers #include <...> are ignored if we use the -MM option, as 1276### e.g. provided by gcc-cpp. 1277### Include FEAT_GUI to get gependency on gui.h 1278### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1279CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1280 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1281 1282# flags for cproto 1283# This is for cproto 3 patchlevel 8 or below 1284# __inline, __attribute__ and __extension__ are not recognized by cproto 1285# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1286#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1287# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1288# -D__extension__= -D__restrict="" \ 1289# -D__gnuc_va_list=char -D__builtin_va_list=char 1290 1291# 1292# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1293# __inline and __attribute__ are now recognized by cproto 1294# -D"foo()=" is not supported by all compilers so do not use it 1295NO_ATTR= 1296# 1297# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1298# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1299# 1300# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1301PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1302 1303 1304################################################ 1305## no changes required below this line ## 1306################################################ 1307 1308SHELL = /bin/sh 1309 1310.SUFFIXES: 1311.SUFFIXES: .c .o .pro 1312 1313PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1314POST_DEFS = $(X_CFLAGS) $(LUA_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(ECL_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1315 1316ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1317 1318# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1319# with "-E". 1320OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1321 1322LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) $(PYTHON_CFLAGS) -Dinline= -D__extension__= -Dalloca=alloca 1323 1324LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1325 1326DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1327 1328ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1329ALL_LIBS = \ 1330 $(GUI_LIBS1) \ 1331 $(GUI_X_LIBS) \ 1332 $(GUI_LIBS2) \ 1333 $(X_PRE_LIBS) \ 1334 $(X_LIBS) \ 1335 $(X_EXTRA_LIBS) \ 1336 $(LIBS) \ 1337 $(EXTRA_LIBS) \ 1338 $(LUA_LIBS) \ 1339 $(MZSCHEME_LIBS) \ 1340 $(PERL_LIBS) \ 1341 $(PYTHON_LIBS) \ 1342 $(PYTHON3_LIBS) \ 1343 $(TCL_LIBS) \ 1344 $(RUBY_LIBS) \ 1345 $(PROFILE_LIBS) 1346 1347# abbreviations 1348DEST_BIN = $(DESTDIR)$(BINDIR) 1349DEST_VIM = $(DESTDIR)$(VIMLOC) 1350DEST_RT = $(DESTDIR)$(VIMRTLOC) 1351DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1352DEST_COL = $(DESTDIR)$(COLSUBLOC) 1353DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1354DEST_IND = $(DESTDIR)$(INDSUBLOC) 1355DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1356DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1357DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1358DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1359DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1360DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1361DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1362DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1363DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1364DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1365DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1366DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1367DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1368 1369# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1370# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1371# directory first. 1372# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1373DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1374DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1375DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1376DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1377DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1378DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1379DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1380DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1381DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1382DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1383DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1384DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1385 1386# BASIC_SRC: files that are always used 1387# GUI_SRC: extra GUI files for current configuration 1388# ALL_GUI_SRC: all GUI files for Unix 1389# 1390# SRC: files used for current configuration 1391# TAGS_SRC: source files used for make tags 1392# TAGS_INCL: include files used for make tags 1393# ALL_SRC: source files used for make depend and make lint 1394 1395TAGS_INCL = *.h 1396 1397BASIC_SRC = \ 1398 blowfish.c \ 1399 buffer.c \ 1400 charset.c \ 1401 diff.c \ 1402 digraph.c \ 1403 edit.c \ 1404 eval.c \ 1405 ex_cmds.c \ 1406 ex_cmds2.c \ 1407 ex_docmd.c \ 1408 ex_eval.c \ 1409 ex_getln.c \ 1410 fileio.c \ 1411 fold.c \ 1412 getchar.c \ 1413 hardcopy.c \ 1414 hashtab.c \ 1415 if_cscope.c \ 1416 if_xcmdsrv.c \ 1417 main.c \ 1418 mark.c \ 1419 memfile.c \ 1420 memline.c \ 1421 menu.c \ 1422 message.c \ 1423 misc1.c \ 1424 misc2.c \ 1425 move.c \ 1426 mbyte.c \ 1427 normal.c \ 1428 ops.c \ 1429 option.c \ 1430 os_unix.c \ 1431 auto/pathdef.c \ 1432 popupmnu.c \ 1433 quickfix.c \ 1434 regexp.c \ 1435 screen.c \ 1436 search.c \ 1437 sha256.c \ 1438 spell.c \ 1439 syntax.c \ 1440 tag.c \ 1441 term.c \ 1442 ui.c \ 1443 undo.c \ 1444 version.c \ 1445 window.c \ 1446 $(OS_EXTRA_SRC) 1447 1448SRC = $(BASIC_SRC) \ 1449 $(GUI_SRC) \ 1450 $(HANGULIN_SRC) \ 1451 $(LUA_SRC) \ 1452 $(MZSCHEME_SRC) \ 1453 $(PERL_SRC) \ 1454 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1455 $(TCL_SRC) \ 1456 $(RUBY_SRC) \ 1457 $(SNIFF_SRC) \ 1458 $(WORKSHOP_SRC) \ 1459 $(WSDEBUG_SRC) 1460 1461TAGS_SRC = *.c *.cpp if_perl.xs 1462 1463EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1464 if_python.c if_python3.c if_tcl.c if_ruby.c if_sniff.c \ 1465 gui_beval.c workshop.c wsdebug.c integration.c netbeans.c 1466 1467# All sources, also the ones that are not configured 1468ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1469 1470# Which files to check with lint. Select one of these three lines. ALL_SRC 1471# checks more, but may not work well for checking a GUI that wasn't configured. 1472# The perl sources also don't work well with lint. 1473LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1474 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1475#LINT_SRC = $(SRC) 1476#LINT_SRC = $(ALL_SRC) 1477#LINT_SRC = $(BASIC_SRC) 1478 1479OBJ = \ 1480 objects/buffer.o \ 1481 objects/blowfish.o \ 1482 objects/charset.o \ 1483 objects/diff.o \ 1484 objects/digraph.o \ 1485 objects/edit.o \ 1486 objects/eval.o \ 1487 objects/ex_cmds.o \ 1488 objects/ex_cmds2.o \ 1489 objects/ex_docmd.o \ 1490 objects/ex_eval.o \ 1491 objects/ex_getln.o \ 1492 objects/fileio.o \ 1493 objects/fold.o \ 1494 objects/getchar.o \ 1495 objects/hardcopy.o \ 1496 objects/hashtab.o \ 1497 $(HANGULIN_OBJ) \ 1498 objects/if_cscope.o \ 1499 objects/if_xcmdsrv.o \ 1500 objects/main.o \ 1501 objects/mark.o \ 1502 objects/memfile.o \ 1503 objects/memline.o \ 1504 objects/menu.o \ 1505 objects/message.o \ 1506 objects/misc1.o \ 1507 objects/misc2.o \ 1508 objects/move.o \ 1509 objects/mbyte.o \ 1510 objects/normal.o \ 1511 objects/ops.o \ 1512 objects/option.o \ 1513 objects/os_unix.o \ 1514 objects/pathdef.o \ 1515 objects/popupmnu.o \ 1516 objects/quickfix.o \ 1517 objects/regexp.o \ 1518 objects/screen.o \ 1519 objects/search.o \ 1520 objects/sha256.o \ 1521 objects/spell.o \ 1522 objects/syntax.o \ 1523 $(SNIFF_OBJ) \ 1524 objects/tag.o \ 1525 objects/term.o \ 1526 objects/ui.o \ 1527 objects/undo.o \ 1528 objects/window.o \ 1529 $(GUI_OBJ) \ 1530 $(LUA_OBJ) \ 1531 $(MZSCHEME_OBJ) \ 1532 $(PERL_OBJ) \ 1533 $(PYTHON_OBJ) \ 1534 $(PYTHON3_OBJ) \ 1535 $(TCL_OBJ) \ 1536 $(RUBY_OBJ) \ 1537 $(OS_EXTRA_OBJ) \ 1538 $(WORKSHOP_OBJ) \ 1539 $(NETBEANS_OBJ) \ 1540 $(WSDEBUG_OBJ) 1541 1542PRO_AUTO = \ 1543 blowfish.pro \ 1544 buffer.pro \ 1545 charset.pro \ 1546 diff.pro \ 1547 digraph.pro \ 1548 edit.pro \ 1549 eval.pro \ 1550 ex_cmds.pro \ 1551 ex_cmds2.pro \ 1552 ex_docmd.pro \ 1553 ex_eval.pro \ 1554 ex_getln.pro \ 1555 fileio.pro \ 1556 fold.pro \ 1557 getchar.pro \ 1558 hardcopy.pro \ 1559 hashtab.pro \ 1560 hangulin.pro \ 1561 if_cscope.pro \ 1562 if_xcmdsrv.pro \ 1563 if_python.pro \ 1564 if_python3.pro \ 1565 if_ruby.pro \ 1566 main.pro \ 1567 mark.pro \ 1568 memfile.pro \ 1569 memline.pro \ 1570 menu.pro \ 1571 message.pro \ 1572 misc1.pro \ 1573 misc2.pro \ 1574 move.pro \ 1575 mbyte.pro \ 1576 normal.pro \ 1577 ops.pro \ 1578 option.pro \ 1579 os_unix.pro \ 1580 popupmnu.pro \ 1581 quickfix.pro \ 1582 regexp.pro \ 1583 screen.pro \ 1584 search.pro \ 1585 sha256.pro \ 1586 spell.pro \ 1587 syntax.pro \ 1588 tag.pro \ 1589 term.pro \ 1590 termlib.pro \ 1591 ui.pro \ 1592 undo.pro \ 1593 version.pro \ 1594 window.pro \ 1595 gui_beval.pro \ 1596 workshop.pro \ 1597 netbeans.pro \ 1598 $(ALL_GUI_PRO) \ 1599 $(TCL_PRO) 1600 1601# Resources used for the Mac are in one directory. 1602RSRC_DIR = os_mac_rsrc 1603 1604PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1605 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1606 1607# Default target is making the executable and tools 1608all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1609 1610tools: $(TOOLS) 1611 1612# Run configure with all the setting from above. 1613# 1614# Note: auto/config.h doesn't depend on configure, because running configure 1615# doesn't always update auto/config.h. The timestamp isn't changed if the 1616# file contents didn't change (to avoid recompiling everything). Including a 1617# dependency on auto/config.h would cause running configure each time when 1618# auto/config.h isn't updated. The dependency on auto/config.mk should make 1619# sure configure is run when it's needed. 1620# 1621config auto/config.mk: auto/configure config.mk.in config.h.in 1622 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1623 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1624 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1625 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1626 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1627 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1628 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1629 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1630 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1631 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1632 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1633 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1634 $(CONF_OPT_SYSMOUSE) 1635 1636# Use "make reconfig" to rerun configure without cached values. 1637# When config.h changes, most things will be recompiled automatically. 1638# Invoke $(MAKE) to run config with the empty auto/config.mk. 1639# Invoke $(MAKE) to build all with the filled auto/config.mk. 1640reconfig: scratch clean 1641 $(MAKE) -f Makefile config 1642 $(MAKE) -f Makefile all 1643 1644# Run autoconf to produce auto/configure. 1645# Note: 1646# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1647# producing auto/configure. 1648# - autoconf is not run automatically, because a patch usually changes both 1649# configure.in and auto/configure but can't update the timestamps. People 1650# who do not have (the correct version of) autoconf would run into trouble. 1651# 1652# Two tricks are required to make autoconf put its output in the "auto" dir: 1653# - Temporarily move the ./configure script to ./configure.save. Don't 1654# overwrite it, it's probably the result of an aborted autoconf. 1655# - Use sed to change ./config.log to auto/config.log in the configure script. 1656# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1657# care of: 1658# - configure.lineno: has the line numbers replaced with $LINENO. That 1659# improves patches a LOT, thus use it instead (until someone says it doesn't 1660# work on some system). 1661# - autom4te.cache directory is created and not cleaned up. Delete it. 1662# - Uses ">config.log" instead of "./config.log". 1663autoconf: 1664 if test ! -f configure.save; then mv configure configure.save; fi 1665 autoconf 1666 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1667 chmod 755 auto/configure 1668 mv -f configure.save configure 1669 -rm -rf autom4te.cache 1670 -rm -f auto/config.status auto/config.cache 1671 1672# Re-execute this Makefile to include the new auto/config.mk produced by 1673# configure Only used when typing "make" with a fresh auto/config.mk. 1674myself: 1675 $(MAKE) -f Makefile all 1676 1677 1678# The normal command to compile a .c file to its .o file. 1679CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1680 1681 1682# Link the target for normal use or debugging. 1683# A shell script is used to try linking without unneccesary libraries. 1684$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1685 $(CCC) version.c -o objects/version.o 1686 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1687 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1688 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1689 1690xxd/xxd$(EXEEXT): xxd/xxd.c 1691 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1692 $(MAKE) -f Makefile 1693 1694# Build the language specific files if they were unpacked. 1695# Generate the converted .mo files separately, it's no problem if this fails. 1696languages: 1697 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1698 cd $(PODIR); \ 1699 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1700 fi 1701 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1702 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1703 fi 1704 1705# Update the *.po files for changes in the sources. Only run manually. 1706update-po: 1707 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1708 1709# Generate function prototypes. This is not needed to compile vim, but if 1710# you want to use it, cproto is out there on the net somewhere -- Webb 1711# 1712# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1713# few include files that can not be found, that's OK. 1714 1715proto: $(PRO_AUTO) $(PRO_MANUAL) 1716 1717# Filter out arguments that cproto doesn't support. 1718# Don't pass "-pthread" to cproto, it sees it as a list of individual flags. 1719# Don't pass "-fstack-protector" to cproto, for the same reason. 1720# The -E"gcc -E" argument must be separate to avoid problems with shell 1721# quoting. 1722CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 1723 `echo '$(LINT_CFLAGS)' | sed -e 's/-pthread//g' -e 's/-fstack-protector//g'` 1724 1725### Would be nice if this would work for "normal" make. 1726### Currently it only works for (Free)BSD make. 1727#$(PRO_AUTO): $$(*F).c 1728# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 1729 1730# Always define FEAT_GUI. This may generate a few warnings if it's also 1731# defined in auto/config.h, you can ignore that. 1732.c.pro: 1733 $(CPROTO) -DFEAT_GUI $< > proto/$@ 1734 echo "/* vim: set ft=c : */" >> proto/$@ 1735 1736os_amiga.pro: os_amiga.c 1737 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1738 echo "/* vim: set ft=c : */" >> proto/$@ 1739 1740os_msdos.pro: os_msdos.c 1741 $(CPROTO) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1742 echo "/* vim: set ft=c : */" >> proto/$@ 1743 1744os_win16.pro: os_win16.c 1745 $(CPROTO) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1746 echo "/* vim: set ft=c : */" >> proto/$@ 1747 1748os_win32.pro: os_win32.c 1749 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1750 echo "/* vim: set ft=c : */" >> proto/$@ 1751 1752os_mswin.pro: os_mswin.c 1753 $(CPROTO) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1754 echo "/* vim: set ft=c : */" >> proto/$@ 1755 1756os_beos.pro: os_beos.c 1757 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1758 echo "/* vim: set ft=c : */" >> proto/$@ 1759 1760os_vms.pro: os_vms.c 1761# must use os_vms_conf.h for auto/config.h 1762 mv auto/config.h auto/config.h.save 1763 cp os_vms_conf.h auto/config.h 1764 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1765 echo "/* vim: set ft=c : */" >> proto/$@ 1766 rm auto/config.h 1767 mv auto/config.h.save auto/config.h 1768 1769# if_perl.pro is special: Use the generated if_perl.c for input and remove 1770# prototypes for local functions. 1771if_perl.pro: auto/if_perl.c 1772 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1773 1774 1775notags: 1776 -rm -f tags 1777 1778# Note: tags is made for the currently configured version, can't include both 1779# Motif and Athena GUI 1780# You can ignore error messages for missing files. 1781tags TAGS: notags 1782 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1783 1784# Make a highlight file for types. Requires Exuberant ctags and awk 1785types: types.vim 1786types.vim: $(TAGS_SRC) $(TAGS_INCL) 1787 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1788 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1789 {printf("%s ", $$1)}END{print ""}' > $@ 1790 1791# Execute the test scripts. Run these after compiling Vim, before installing. 1792# This doesn't depend on $(VIMTARGET), because that won't work when configure 1793# wasn't run yet. Restart make to build it instead. 1794# 1795# This will produce a lot of garbage on your screen, including a few error 1796# messages. Don't worry about that. 1797# If there is a real error, there will be a difference between "test.out" and 1798# a "test99.ok" file. 1799# If everything is alright, the final message will be "ALL DONE". If not you 1800# get "TEST FAILURE". 1801# 1802test check: 1803 $(MAKE) -f Makefile $(VIMTARGET) 1804 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1805 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1806 fi 1807 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 1808 ln -s $(VIMTARGET) vim; \ 1809 fi 1810 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1811 1812testclean: 1813 cd testdir; $(MAKE) -f Makefile clean 1814 if test -d $(PODIR); then \ 1815 cd $(PODIR); $(MAKE) checkclean; \ 1816 fi 1817 1818install: $(GUI_INSTALL) 1819 1820install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1821 1822install_gui_extra: installgtutorbin 1823 1824installvim: installvimbin installtutorbin \ 1825 installruntime installlinks installmanlinks 1826 1827# 1828# Avoid overwriting an existing executable, somebody might be running it and 1829# overwriting it could cause it to crash. Deleting it is OK, it won't be 1830# really deleted until all running processes for it have exited. It is 1831# renamed first, in case the deleting doesn't work. 1832# 1833# If you want to keep an older version, rename it before running "make 1834# install". 1835# 1836installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1837 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1838 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1839 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1840 fi 1841 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1842 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1843 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1844# may create a link to the new executable from /usr/bin/vi 1845 -$(LINKIT) 1846 1847# Long list of arguments for the shell script that installs the manual pages 1848# for one language. 1849INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1850 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1851 1852# Install most of the runtime files 1853installruntime: installrtbase installmacros installtutor installspell 1854 1855# install the help files; first adjust the contents for the final location 1856installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1857 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1858 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1859 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1860 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1861 @echo generating help tags 1862# Generate the help tags with ":helptags" to handle all languages. 1863 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1864 cd $(HELPSOURCE); \ 1865 files=`ls *.txt tags`; \ 1866 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1867 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1868 cd $(DEST_HELP); \ 1869 chmod $(HELPMOD) $$files 1870 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1871 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1872# install the menu files 1873 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1874 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1875 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1876 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1877 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1878 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1879# install the evim file 1880 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1881 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1882 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1883 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1884# install the bugreport file 1885 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1886 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1887# install the example vimrc files 1888 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1889 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1890 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1891 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1892# install the file type detection files 1893 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1894 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1895 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1896 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1897 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1898 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1899 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1900 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1901 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1902 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1903 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1904 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1905 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1906 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1907 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1908 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1909# install the print resource files 1910 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1911 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1912# install the colorscheme files 1913 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1914 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1915# install the syntax files 1916 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1917 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1918# install the indent files 1919 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1920 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1921# install the standard autoload files 1922 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 1923 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 1924 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 1925 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 1926# install the standard plugin files 1927 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1928 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1929# install the ftplugin files 1930 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 1931 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1932# install the compiler files 1933 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1934 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1935 1936installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1937 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1938 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1939 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1940 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1941# When using CVS some CVS directories might have been copied. 1942 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \ 1943 if test -n "$$cvs"; then \ 1944 rm -rf $$cvs; \ 1945 fi 1946 1947# install the tutor files 1948installtutorbin: $(DEST_VIM) 1949 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1950 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1951 1952installgtutorbin: $(DEST_VIM) 1953 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 1954 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 1955 1956installtutor: $(DEST_RT) $(DEST_TUTOR) 1957 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1958 chmod $(HELPMOD) $(DEST_TUTOR)/* 1959 1960# Install the spell files, if they exist. This assumes at least the English 1961# spell file is there. 1962installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 1963 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 1964 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 1965 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 1966 fi 1967 1968# install helper program xxd 1969installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1970 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 1971 $(INSTALL_TOOL_LANGS) 1972 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1973 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1974 rm -f $(DEST_BIN)/xxd.rm; \ 1975 fi 1976 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1977 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1978 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1979 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 1980 1981# install the runtime tools 1982 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1983# When using CVS some CVS directories might have been copied. 1984 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1985 if test -n "$$cvs"; then \ 1986 rm -rf $$cvs; \ 1987 fi 1988 -chmod $(FILEMOD) $(DEST_TOOLS)/* 1989# replace the path in some tools 1990 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 1991 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1992 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1993 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 1994 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 1995 1996# install the language specific files for tools, if they were unpacked 1997install-tool-languages: 1998 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1999 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2000 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2001 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2002 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2003 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2004 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2005 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2006 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2007 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2008 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2009 2010# install the language specific files, if they were unpacked 2011install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2012 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2013 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2014 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2015 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2016 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2017 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2018 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2019 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2020 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2021 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2022 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2023 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2024 $(DEST_MAN_FR) $(INSTALLMLARGS) 2025 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2026 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2027 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2028 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2029 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2030 $(DEST_MAN_IT) $(INSTALLMLARGS) 2031 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2032 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2033 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2034 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2035 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2036 $(DEST_MAN_PL) $(INSTALLMLARGS) 2037 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2038 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2039 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2040 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2041 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2042 $(DEST_MAN_RU) $(INSTALLMLARGS) 2043 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2044 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2045 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2046 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2047 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2048 fi 2049 if test -d $(LANGSOURCE); then \ 2050 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2051 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2052 fi 2053 if test -d $(KMAPSOURCE); then \ 2054 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2055 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2056 fi 2057 2058# install the icons for KDE, if the directory exists and the icon doesn't. 2059ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2060ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2061ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2062KDEPATH = $(HOME)/.kde/share/icons 2063install-icons: 2064 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2065 -a ! -f $(ICON48PATH)/gvim.png; then \ 2066 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2067 fi 2068 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2069 -a ! -f $(ICON32PATH)/gvim.png; then \ 2070 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2071 fi 2072 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2073 -a ! -f $(ICON16PATH)/gvim.png; then \ 2074 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2075 fi 2076 2077 2078$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2079 @echo Runtime files not found. 2080 @echo You need to unpack the runtime archive before running "make install". 2081 test -f error 2082 2083$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2084 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2085 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2086 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2087 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2088 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2089 -$(SHELL) ./mkinstalldirs $@ 2090 -chmod $(DIRMOD) $@ 2091 2092# create links from various names to vim. This is only done when the links 2093# (or executables with the same name) don't exist yet. 2094installlinks: $(GUI_TARGETS) \ 2095 $(DEST_BIN)/$(EXTARGET) \ 2096 $(DEST_BIN)/$(VIEWTARGET) \ 2097 $(DEST_BIN)/$(RVIMTARGET) \ 2098 $(DEST_BIN)/$(RVIEWTARGET) \ 2099 $(INSTALLVIMDIFF) 2100 2101installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2102 $(DEST_BIN)/$(GVIEWTARGET) \ 2103 $(DEST_BIN)/$(RGVIMTARGET) \ 2104 $(DEST_BIN)/$(RGVIEWTARGET) \ 2105 $(DEST_BIN)/$(EVIMTARGET) \ 2106 $(DEST_BIN)/$(EVIEWTARGET) \ 2107 $(INSTALLGVIMDIFF) 2108 2109installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2110installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2111 2112$(DEST_BIN)/$(EXTARGET): 2113 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2114 2115$(DEST_BIN)/$(VIEWTARGET): 2116 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2117 2118$(DEST_BIN)/$(GVIMTARGET): 2119 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2120 2121$(DEST_BIN)/$(GVIEWTARGET): 2122 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2123 2124$(DEST_BIN)/$(RVIMTARGET): 2125 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2126 2127$(DEST_BIN)/$(RVIEWTARGET): 2128 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2129 2130$(DEST_BIN)/$(RGVIMTARGET): 2131 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2132 2133$(DEST_BIN)/$(RGVIEWTARGET): 2134 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2135 2136$(DEST_BIN)/$(VIMDIFFTARGET): 2137 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2138 2139$(DEST_BIN)/$(GVIMDIFFTARGET): 2140 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2141 2142$(DEST_BIN)/$(EVIMTARGET): 2143 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2144 2145$(DEST_BIN)/$(EVIEWTARGET): 2146 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2147 2148# Create links for the manual pages with various names to vim. This is only 2149# done when the links (or manpages with the same name) don't exist yet. 2150 2151INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2152 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2153 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2154 $(GVIMDIFFNAME) $(EVIEWNAME) 2155 2156installmanlinks: 2157 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2158 $(DEST_MAN) $(INSTALLMLARGS) 2159 2160uninstall: uninstall_runtime 2161 -rm -f $(DEST_BIN)/$(VIMTARGET) 2162 -rm -f $(DEST_BIN)/vimtutor 2163 -rm -f $(DEST_BIN)/gvimtutor 2164 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2165 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2166 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2167 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2168 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2169 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2170 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2171 2172# Note: the "rmdir" will fail if any files were added after "make install" 2173uninstall_runtime: 2174 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2175 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2176 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2177 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2178 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2179 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2180 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2181 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2182 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2183 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2184 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2185 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2186 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2187 $(DEST_MAN) $(INSTALLMLARGS) 2188 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2189 $(DEST_MAN_FR) $(INSTALLMLARGS) 2190 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2191 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2192 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2193 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2194 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2195 $(DEST_MAN_IT) $(INSTALLMLARGS) 2196 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2197 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2198 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2199 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2200 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2201 $(DEST_MAN_PL) $(INSTALLMLARGS) 2202 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2203 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2204 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2205 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2206 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2207 $(DEST_MAN_RU) $(INSTALLMLARGS) 2208 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2209 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2210 -rm -f $(DEST_MAN)/xxd.1 2211 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2212 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2213 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2214 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2215 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2216 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2217 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2218 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2219 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2220 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2221 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2222 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2223 -rm -f $(SYS_OPTWIN_FILE) 2224 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2225 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2226 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2227 -rm -rf $(DEST_MACRO) 2228 -rm -rf $(DEST_TUTOR) 2229 -rm -rf $(DEST_SPELL) 2230 -rm -rf $(DEST_TOOLS) 2231 -rm -rf $(DEST_LANG) 2232 -rm -rf $(DEST_KMAP) 2233 -rm -rf $(DEST_COMP) 2234 -rm -f $(DEST_PRINT)/*.ps 2235 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2236 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2237 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2238 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2239 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2240# This will fail when other Vim versions are installed, no worries. 2241 -rmdir $(DEST_VIM) 2242 2243# Clean up all the files that have been produced, except configure's. 2244# We support common typing mistakes for Juergen! :-) 2245clean celan: testclean 2246 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2247 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2248 -rm -f conftest* *~ auto/link.sed 2249 -rm -rf $(APPDIR) 2250 -rm -rf mzscheme_base.c 2251 if test -d $(PODIR); then \ 2252 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2253 fi 2254 2255# Make a shadow directory for compilation on another system or with different 2256# features. 2257SHADOWDIR = shadow 2258 2259shadow: runtime pixmaps 2260 mkdir $(SHADOWDIR) 2261 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs . 2262 mkdir $(SHADOWDIR)/auto 2263 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2264 cd $(SHADOWDIR); rm -f auto/link.sed 2265 cp Makefile configure $(SHADOWDIR) 2266 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2267 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2268 cp config.mk.dist $(SHADOWDIR) 2269 mkdir $(SHADOWDIR)/xxd 2270 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2271 if test -d $(RSRC_DIR); then \ 2272 cd $(SHADOWDIR); \ 2273 ln -s ../infplist.xml .; \ 2274 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2275 fi 2276 mkdir $(SHADOWDIR)/testdir 2277 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2278 ../../testdir/vimrc.unix \ 2279 ../../testdir/*.in \ 2280 ../../testdir/*.vim \ 2281 ../../testdir/*.ok . 2282 2283# Link needed for doing "make install" in a shadow directory. 2284runtime: 2285 -ln -s ../runtime . 2286 2287# Link needed for doing "make" using GTK in a shadow directory. 2288pixmaps: 2289 -ln -s ../pixmaps . 2290 2291# Update the synmenu.vim file with the latest Syntax menu. 2292# This is only needed when runtime/makemenu.vim was changed. 2293menu: ./vim ../runtime/makemenu.vim 2294 ./vim -u ../runtime/makemenu.vim 2295 2296# Start configure from scratch 2297scrub scratch: 2298 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2299 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2300 touch auto/config.h 2301 cp config.mk.dist auto/config.mk 2302 2303distclean: clean scratch 2304 -rm -f tags 2305 2306dist: distclean 2307 @echo 2308 @echo Making the distribution has to be done in the top directory 2309 2310mdepend: 2311 -@rm -f Makefile~ 2312 cp Makefile Makefile~ 2313 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2314 @for i in $(ALL_SRC) ; do \ 2315 echo "$$i" ; \ 2316 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2317 $(CPP) $$i |\ 2318 grep '^# .*"\./.*\.h"' |\ 2319 sort -t'"' -u +1 -2 |\ 2320 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2321 ` >> tmp_make ; \ 2322 done 2323 mv tmp_make Makefile 2324 2325depend: 2326 -@rm -f Makefile~ 2327 cp Makefile Makefile~ 2328 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2329 -for i in $(ALL_SRC); do echo $$i; \ 2330 $(CPP_DEPEND) $$i | \ 2331 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2332 mv tmp_make Makefile 2333 2334# Run lint. Clean up the *.ln files that are sometimes left behind. 2335lint: 2336 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2337 -rm -f *.ln 2338 2339# Check dosinst.c with lint. 2340lintinstall: 2341 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2342 -rm -f dosinst.ln 2343 2344########################################################################### 2345 2346.c.o: 2347 $(CCC) $< 2348 2349auto/if_perl.c: if_perl.xs 2350 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2351 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2352 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2353 2354auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2355 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2356 2357QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2358auto/pathdef.c: Makefile auto/config.mk 2359 -@echo creating $@ 2360 -@echo '/* pathdef.c */' > $@ 2361 -@echo '/* This file is automatically created by Makefile' >> $@ 2362 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2363 -@echo '#include "vim.h"' >> $@ 2364 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2365 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2366 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2367 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2368 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2369 -@if test -n "$(COMPILEDBY)"; then \ 2370 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2371 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2372 -@echo '";' >> $@ 2373 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2374 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2375 -@echo '";' >> $@ 2376 -@sh $(srcdir)/pathdef.sh 2377 2378# All the object files are put in the "objects" directory. Since not all make 2379# commands understand putting object files in another directory, it must be 2380# specified for each file separately. 2381 2382objects: 2383 mkdir objects 2384 2385objects/blowfish.o: blowfish.c 2386 $(CCC) -o $@ blowfish.c 2387 2388objects/buffer.o: buffer.c 2389 $(CCC) -o $@ buffer.c 2390 2391objects/charset.o: charset.c 2392 $(CCC) -o $@ charset.c 2393 2394objects/diff.o: diff.c 2395 $(CCC) -o $@ diff.c 2396 2397objects/digraph.o: digraph.c 2398 $(CCC) -o $@ digraph.c 2399 2400objects/edit.o: edit.c 2401 $(CCC) -o $@ edit.c 2402 2403objects/eval.o: eval.c 2404 $(CCC) -o $@ eval.c 2405 2406objects/ex_cmds.o: ex_cmds.c 2407 $(CCC) -o $@ ex_cmds.c 2408 2409objects/ex_cmds2.o: ex_cmds2.c 2410 $(CCC) -o $@ ex_cmds2.c 2411 2412objects/ex_docmd.o: ex_docmd.c 2413 $(CCC) -o $@ ex_docmd.c 2414 2415objects/ex_eval.o: ex_eval.c 2416 $(CCC) -o $@ ex_eval.c 2417 2418objects/ex_getln.o: ex_getln.c 2419 $(CCC) -o $@ ex_getln.c 2420 2421objects/fileio.o: fileio.c 2422 $(CCC) -o $@ fileio.c 2423 2424objects/fold.o: fold.c 2425 $(CCC) -o $@ fold.c 2426 2427objects/getchar.o: getchar.c 2428 $(CCC) -o $@ getchar.c 2429 2430objects/hardcopy.o: hardcopy.c 2431 $(CCC) -o $@ hardcopy.c 2432 2433objects/hashtab.o: hashtab.c 2434 $(CCC) -o $@ hashtab.c 2435 2436objects/gui.o: gui.c 2437 $(CCC) -o $@ gui.c 2438 2439objects/gui_at_fs.o: gui_at_fs.c 2440 $(CCC) -o $@ gui_at_fs.c 2441 2442objects/gui_at_sb.o: gui_at_sb.c 2443 $(CCC) -o $@ gui_at_sb.c 2444 2445objects/gui_athena.o: gui_athena.c 2446 $(CCC) -o $@ gui_athena.c 2447 2448objects/gui_beval.o: gui_beval.c 2449 $(CCC) -o $@ gui_beval.c 2450 2451objects/gui_gtk.o: gui_gtk.c 2452 $(CCC) -o $@ gui_gtk.c 2453 2454objects/gui_gtk_f.o: gui_gtk_f.c 2455 $(CCC) -o $@ gui_gtk_f.c 2456 2457objects/gui_gtk_x11.o: gui_gtk_x11.c 2458 $(CCC) -o $@ gui_gtk_x11.c 2459 2460objects/gui_motif.o: gui_motif.c 2461 $(CCC) -o $@ gui_motif.c 2462 2463objects/gui_xmdlg.o: gui_xmdlg.c 2464 $(CCC) -o $@ gui_xmdlg.c 2465 2466objects/gui_xmebw.o: gui_xmebw.c 2467 $(CCC) -o $@ gui_xmebw.c 2468 2469objects/gui_x11.o: gui_x11.c 2470 $(CCC) -o $@ gui_x11.c 2471 2472objects/gui_photon.o: gui_photon.c 2473 $(CCC) -o $@ gui_photon.c 2474 2475objects/gui_mac.o: gui_mac.c 2476 $(CCC) -o $@ gui_mac.c 2477 2478objects/hangulin.o: hangulin.c 2479 $(CCC) -o $@ hangulin.c 2480 2481objects/if_cscope.o: if_cscope.c 2482 $(CCC) -o $@ if_cscope.c 2483 2484objects/if_xcmdsrv.o: if_xcmdsrv.c 2485 $(CCC) -o $@ if_xcmdsrv.c 2486 2487objects/if_lua.o: if_lua.c 2488 $(CCC) -o $@ if_lua.c 2489 2490objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 2491 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 2492 2493mzscheme_base.c: 2494 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 2495 2496objects/if_perl.o: auto/if_perl.c 2497 $(CCC) -o $@ auto/if_perl.c 2498 2499objects/if_perlsfio.o: if_perlsfio.c 2500 $(CCC) -o $@ if_perlsfio.c 2501 2502objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2503 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/config.c \ 2504 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2505 2506objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2507 $(CCC) $(PYTHON_CFLAGS) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2508 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2509 $(PYTHON_GETPATH_CFLAGS) 2510 2511objects/py3_config.o: $(PYTHON3_CONFDIR)/config.c 2512 $(CCC) $(PYTHON3_CFLAGS) -o $@ $(PYTHON3_CONFDIR)/config.c \ 2513 -I$(PYTHON3_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2514 2515objects/if_python.o: if_python.c 2516 $(CCC) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) -o $@ if_python.c 2517 2518objects/if_python3.o: if_python3.c 2519 $(CCC) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) -o $@ if_python3.c 2520 2521objects/if_ruby.o: if_ruby.c 2522 $(CCC) -o $@ if_ruby.c 2523 2524objects/if_sniff.o: if_sniff.c 2525 $(CCC) -o $@ if_sniff.c 2526 2527objects/if_tcl.o: if_tcl.c 2528 $(CCC) -o $@ if_tcl.c 2529 2530objects/integration.o: integration.c 2531 $(CCC) -o $@ integration.c 2532 2533objects/main.o: main.c 2534 $(CCC) -o $@ main.c 2535 2536objects/mark.o: mark.c 2537 $(CCC) -o $@ mark.c 2538 2539objects/memfile.o: memfile.c 2540 $(CCC) -o $@ memfile.c 2541 2542objects/memline.o: memline.c 2543 $(CCC) -o $@ memline.c 2544 2545objects/menu.o: menu.c 2546 $(CCC) -o $@ menu.c 2547 2548objects/message.o: message.c 2549 $(CCC) -o $@ message.c 2550 2551objects/misc1.o: misc1.c 2552 $(CCC) -o $@ misc1.c 2553 2554objects/misc2.o: misc2.c 2555 $(CCC) -o $@ misc2.c 2556 2557objects/move.o: move.c 2558 $(CCC) -o $@ move.c 2559 2560objects/mbyte.o: mbyte.c 2561 $(CCC) -o $@ mbyte.c 2562 2563objects/normal.o: normal.c 2564 $(CCC) -o $@ normal.c 2565 2566objects/ops.o: ops.c 2567 $(CCC) -o $@ ops.c 2568 2569objects/option.o: option.c 2570 $(CCC) -o $@ option.c 2571 2572objects/os_beos.o: os_beos.c 2573 $(CCC) -o $@ os_beos.c 2574 2575objects/os_qnx.o: os_qnx.c 2576 $(CCC) -o $@ os_qnx.c 2577 2578objects/os_macosx.o: os_macosx.m 2579 $(CCC) -o $@ os_macosx.m 2580 2581objects/os_mac_conv.o: os_mac_conv.c 2582 $(CCC) -o $@ os_mac_conv.c 2583 2584objects/os_unix.o: os_unix.c 2585 $(CCC) -o $@ os_unix.c 2586 2587objects/pathdef.o: auto/pathdef.c 2588 $(CCC) -o $@ auto/pathdef.c 2589 2590objects/pty.o: pty.c 2591 $(CCC) -o $@ pty.c 2592 2593objects/popupmnu.o: popupmnu.c 2594 $(CCC) -o $@ popupmnu.c 2595 2596objects/quickfix.o: quickfix.c 2597 $(CCC) -o $@ quickfix.c 2598 2599objects/regexp.o: regexp.c 2600 $(CCC) -o $@ regexp.c 2601 2602objects/screen.o: screen.c 2603 $(CCC) -o $@ screen.c 2604 2605objects/search.o: search.c 2606 $(CCC) -o $@ search.c 2607 2608objects/sha256.o: sha256.c 2609 $(CCC) -o $@ sha256.c 2610 2611objects/spell.o: spell.c 2612 $(CCC) -o $@ spell.c 2613 2614objects/syntax.o: syntax.c 2615 $(CCC) -o $@ syntax.c 2616 2617objects/tag.o: tag.c 2618 $(CCC) -o $@ tag.c 2619 2620objects/term.o: term.c 2621 $(CCC) -o $@ term.c 2622 2623objects/ui.o: ui.c 2624 $(CCC) -o $@ ui.c 2625 2626objects/undo.o: undo.c 2627 $(CCC) -o $@ undo.c 2628 2629objects/window.o: window.c 2630 $(CCC) -o $@ window.c 2631 2632objects/workshop.o: workshop.c 2633 $(CCC) -o $@ workshop.c 2634 2635objects/wsdebug.o: wsdebug.c 2636 $(CCC) -o $@ wsdebug.c 2637 2638objects/netbeans.o: netbeans.c 2639 $(CCC) -o $@ netbeans.c 2640 2641Makefile: 2642 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2643 2644############################################################################### 2645### MacOS X installation 2646### 2647### This installs a runnable Vim.app in $(prefix) 2648 2649REZ = /Developer/Tools/Rez 2650RESDIR = $(APPDIR)/Contents/Resources 2651VERSION = $(VIMMAJOR).$(VIMMINOR) 2652 2653### Common flags 2654M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2655 -DAPP_VER=$(VERSION) 2656 2657install_macosx: gui_bundle 2658# Remove the link to the runtime dir, don't want to copy all of that. 2659 -rm $(RESDIR)/vim/runtime 2660 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2661# Generate the help tags file now, it won't work with "make installruntime". 2662 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2663# Install the runtime files. Recursive! 2664 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2665# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2666 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2667 VIMEXE=$$srcdir/$(VIMTARGET) \ 2668 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2669 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2670 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2671 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2672 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2673# Put the link back. 2674 ln -s `pwd`/../runtime $(RESDIR)/vim 2675# Copy rgb.txt, Mac doesn't always have X11 2676 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2677# TODO: Create the vimtutor and/or gvimtutor application. 2678 2679gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2680 bundle-language 2681 2682$(RESDIR): 2683 mkdir -p $@ 2684 2685bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2686# Make a link to the runtime directory, so that we can try out the executable 2687# without installing it. 2688 mkdir -p $(RESDIR)/vim 2689 -ln -s `pwd`/../runtime $(RESDIR)/vim 2690 2691bundle-executable: $(VIMTARGET) 2692 mkdir -p $(APPDIR)/Contents/MacOS 2693 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2694 2695bundle-info: bundle-dir 2696 @echo "Creating PkgInfo" 2697 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2698 @echo "Creating Info.plist" 2699 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2700 2701bundle-resource: bundle-dir bundle-rsrc 2702 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2703 2704### Classic resources 2705# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2706# This file is also required for OS X Vim. 2707bundle-rsrc: os_mac.rsr.hqx 2708 @echo "Creating resource fork" 2709 python dehqx.py $< 2710 rm -f gui_mac.rsrc 2711 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2712 2713# po/Make_osx.pl says something about generating a Mac message file 2714# for Ukrananian. Would somebody using Mac OS X in Ukranian 2715# *really* be upset that Carbon Vim was not localised in 2716# Ukranian? 2717# 2718#bundle-language: bundle-dir po/Make_osx.pl 2719# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2720bundle-language: bundle-dir 2721 2722$(APPDIR)/Contents: 2723 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2724 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2725 2726 2727############################################################################### 2728### (automatically generated by 'make depend') 2729### Dependencies: 2730objects/blowfish.o: blowfish.c vim.h auto/config.h feature.h os_unix.h \ 2731 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2732 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2733 globals.h farsi.h arabic.h 2734objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2735 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2736 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2737 arabic.h version.h 2738objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2739 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2740 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2741 arabic.h 2742objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2743 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2744 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2745 arabic.h 2746objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2747 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2748 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2749 arabic.h 2750objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2751 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2752 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2753 arabic.h 2754objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2755 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2756 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2757 arabic.h version.h 2758objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2759 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2760 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2761 arabic.h version.h 2762objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2763 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2764 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2765 globals.h farsi.h arabic.h version.h 2766objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2767 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2768 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2769 globals.h farsi.h arabic.h 2770objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2771 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2772 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2773 arabic.h 2774objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2775 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2776 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2777 globals.h farsi.h arabic.h 2778objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2779 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2780 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2781 arabic.h 2782objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2783 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2784 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2785 arabic.h 2786objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2787 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2788 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2789 arabic.h 2790objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2791 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2792 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2793 globals.h farsi.h arabic.h version.h 2794objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2795 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2796 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2797 arabic.h 2798objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2799 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2800 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2801 globals.h farsi.h arabic.h if_cscope.h 2802objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2803 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2804 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2805 globals.h farsi.h arabic.h version.h 2806objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2807 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2808 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2809 arabic.h farsi.c arabic.c 2810objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2811 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2812 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2813 arabic.h 2814objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2815 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2816 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2817 arabic.h 2818objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2819 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2820 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2821 arabic.h 2822objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2823 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2824 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2825 arabic.h 2826objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2827 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2828 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2829 arabic.h 2830objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2831 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2832 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2833 arabic.h version.h 2834objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2835 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2836 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2837 arabic.h 2838objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2839 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2840 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2841 arabic.h 2842objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2843 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2844 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2845 arabic.h 2846objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2847 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2848 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2849 arabic.h 2850objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2851 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2852 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2853objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2854 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2855 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2856 arabic.h 2857objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2858 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2859 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2860 arabic.h if_mzsch.h os_unixx.h 2861objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2862 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2863 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2864 globals.h farsi.h arabic.h 2865objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 2866 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2867 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2868 globals.h farsi.h arabic.h 2869objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2870 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2871 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2872 globals.h farsi.h arabic.h 2873objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2874 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2875 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2876 arabic.h 2877objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2878 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2879 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2880 arabic.h 2881objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2882 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2883 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2884 arabic.h 2885objects/sha256.o: sha256.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2886 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2887 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2888 arabic.h 2889objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2890 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2891 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2892 arabic.h 2893objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2894 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2895 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2896 arabic.h 2897objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2898 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2899 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2900objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2901 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2902 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2903 arabic.h 2904objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2905 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2906 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2907objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2908 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2909 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2910 arabic.h 2911objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2912 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2913 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2914 arabic.h version.h 2915objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2916 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2917 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2918 arabic.h 2919objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2920 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2921 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2922objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 2923 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2924 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2925 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 2926objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2927 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2928 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2929 globals.h farsi.h arabic.h gui_gtk_f.h 2930objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2931 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2932 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2933 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 2934 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 2935 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 2936 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2937 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2938 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2939 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2940 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2941 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2942 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2943 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2944 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2945 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2946 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2947 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2948 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2949 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2950 ../pixmaps/tb_minwidth.xpm 2951objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 2952 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2953 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2954 globals.h farsi.h arabic.h 2955objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 2956 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2957 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2958 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 2959objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2960 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2961 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2962 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 2963 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 2964 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 2965 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2966 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2967 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2968 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2969 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2970 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2971 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2972 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2973 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2974 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2975 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2976 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2977 ../pixmaps/tb_minwidth.xpm 2978objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2979 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2980 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2981 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2982 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2983objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2984 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2985 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2986 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 2987 ../runtime/vim48x48.xpm 2988objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 2989 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2990 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2991 globals.h farsi.h arabic.h gui_at_sb.h 2992objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 2993 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2994 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2995 globals.h farsi.h arabic.h gui_at_sb.h 2996objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2997 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2998 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2999objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 3000 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3001 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3002 globals.h farsi.h arabic.h 3003objects/if_lua.o: if_lua.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3004 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3005 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3006 arabic.h 3007objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 3008 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3009 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3010 globals.h farsi.h arabic.h if_mzsch.h mzscheme_base.c 3011objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 3012 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3013 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3014 globals.h farsi.h arabic.h 3015objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 3016 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3017 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3018 globals.h farsi.h arabic.h 3019objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 3020 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3021 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3022 globals.h farsi.h arabic.h 3023objects/if_python3.o: if_python3.c vim.h auto/config.h feature.h os_unix.h \ 3024 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3025 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3026 globals.h farsi.h arabic.h 3027objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3028 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3029 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3030 arabic.h 3031objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 3032 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 3033 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 3034 arabic.h version.h 3035objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 3036 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3037 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3038 globals.h farsi.h arabic.h os_unixx.h 3039objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 3040 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3041 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3042 globals.h farsi.h arabic.h 3043objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 3044 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 3045 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 3046 proto.h globals.h farsi.h arabic.h version.h workshop.h 3047objects/wsdebug.o: wsdebug.c 3048objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 3049 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3050 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3051 globals.h farsi.h arabic.h integration.h 3052objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 3053 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 3054 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 3055 globals.h farsi.h arabic.h version.h 3056
