1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME & KDE and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-perlinterp for Perl interpreter 42# --enable-pythoninterp for Python interpreter 43# --enable-rubyinterp for Ruby interpreter 44# --enable-tclinterp for Tcl interpreter 45# --enable-cscope for Cscope interface 46# - Uncomment one of the lines with --with-features= to enable a set of 47# features (but not the interfaces just mentioned). 48# - Uncomment the line with --disable-acl to disable ACL support even 49# though your system supports it. 50# - Uncomment the line with --disable-gpm to disable gpm support 51# even though you have gpm libraries and includes 52# - Uncomment one of the lines with CFLAGS and/or CC if you have 53# something very special or want to tune the optimizer. 54# - Search for the name of your system to see if it needs anything 55# special. 56# - A few versions of make use '.include "file"' instead of 'include 57# file'. Adjust the include line below if yours does. 58# 59# 2. Edit feature.h {{{1 60# Only if you do not agree with the default compile features, e.g.: 61# - you want Vim to be as vi compatible as it can be 62# - you want to use Emacs tags files 63# - you want right-to-left editing (Hebrew) 64# - you want 'langmap' support (Greek) 65# - you want to remove features to make Vim smaller 66# 67# 3. "make" {{{1 68# Will first run ./configure with the options in this file. Then it will 69# start make again on this Makefile to do the compiling. You can also do 70# this in two steps with: 71# make config 72# make 73# The configuration phase creates/overwrites auto/config.h and 74# auto/config.mk. 75# The configure script is created with "make autoconf". It can detect 76# different features of your system and act accordingly. However, it is 77# not correct for all systems. Check this: 78# - If you have X windows, but configure could not find it or reported 79# another include/library directory then you wanted to use, you have 80# to set CONF_OPT_X below. You might also check the installation of 81# xmkmf. 82# - If you have --enable-gui=motif and have Motif on your system, but 83# configure reports "checking for location of gui... <not found>", you 84# have to set GUI_INC_LOC and GUI_LIB_LOC below. 85# If you changed something, do this to run configure again: 86# make reconfig 87# 88# - If you do not trust the automatic configuration code, then inspect 89# auto/config.h and auto/config.mk, before starting the actual build 90# phase. If possible edit this Makefile, rather than auto/config.mk -- 91# especially look at the definition of VIMLOC below. Note that the 92# configure phase overwrites auto/config.mk and auto/config.h again. 93# - If you get error messages, find out what is wrong and try to correct 94# it in this Makefile. You may need to do "make reconfig" when you 95# change anything that configure uses (e.g. switching from an old C 96# compiler to an ANSI C compiler). Only when auto/configure does 97# something wrong you may need to change one of the other files. If 98# you find a clean way to fix the problem, consider sending a note to 99# the author of autoconf ([email protected]) or Vim 100# ([email protected]). Don't bother to do that when you made a hack 101# solution for a non-standard system. 102# 103# 4. "make test" {{{1 104# This is optional. This will run Vim scripts on a number of test 105# files, and compare the produced output with the expected output. 106# If all is well, you will get the "ALL DONE" message in the end. See 107# below (search for "/^test"). 108# 109# 5. "make install" {{{1 110# If the new Vim seems to be working OK you can install it and the 111# documentation in the appropriate location. The default is 112# "/usr/local". Change "prefix" below to change the location. 113# "auto/pathdef.c" will be compiled again after changing this to make 114# the executable know where the help files are located. 115# Note that any existing executable is removed or overwritten. If you 116# want to keep it you will have to make a backup copy first. 117# The runtime files are in a different directory for each version. You 118# might want to delete an older version. 119# If you don't want to install everything, there are other targets: 120# make installvim only installs Vim, not the tools 121# make installvimbin only installs the Vim executable 122# make installruntime only installs the Vim help and 123# runtime files 124# make installlinks only installs the Vim binary links 125# make installmanlinks only installs the Vim manpage links 126# make installmacros only installs the Vim macros 127# make installtutor only installs the Vim tutor 128# make installspell only installs the spell files 129# make installtools only installs xxd 130# If you install Vim, not to install for real but to prepare a package 131# or RPM, set DESTDIR to the root of the tree. 132# 133# 6. Use Vim until a new version comes out. {{{1 134# 135# 7. "make uninstall_runtime" {{{1 136# Will remove the runtime files for the current version. This is safe 137# to use while another version is being used, only version-specific 138# files will be deleted. 139# To remove the runtime files of another version: 140# make uninstall_runtime VIMRTDIR=/vim54 141# If you want to delete all installed files, use: 142# make uninstall 143# Note that this will delete files that have the same name for any 144# version, thus you might need to do a "make install" soon after this. 145# Be careful not to remove a version of Vim that is still being used! 146# To find out which files and directories will be deleted, use: 147# make -n uninstall 148# }}} 149# 150### This Makefile has been succesfully tested on many systems. {{{ 151### Only the ones that require special options are mentioned here. 152### Check the (*) column for remarks, listed below. 153### Later code changes may cause small problems, otherwise Vim is supposed to 154### compile and run without problems. 155 156#system: configurations: version (*) tested by: 157#------------- ------------------------ ------- - ---------- 158#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 159#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 160#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 161#AIX 4.2.1 cc 5.2k (C) Will Fiveash 162#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 163#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 164#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 165#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 166#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 167#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 168#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 169#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 170#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 171#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 172#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 173#Irix 6.4 cc ? 5.0m (S) Rick Sayre 174#Irix 6.5 cc ? 6.0 (S) David Harrison 175#Irix 64 bit 4.5 (K) Jon Wright 176#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 177#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 178#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 179#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 180#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 181#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 182#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 183#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 184#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 185#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 186#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 187#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 188#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 189#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 190#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 191#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 192#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 193#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 194#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 195#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 196#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 197#Solaris with -lthread 5.5 (W) K. Nagano 198#Solaris gcc (b) Riccardo 199#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 200#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 201#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 202#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 203#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 204#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 205# }}} 206 207# (*) Remarks: {{{ 208# 209# (1) Uncomment line below for shlicc2 210# (2) HPUX with compile problems or wrong digraphs, uncomment line below 211# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 212# And add "-lXpm" to MOTIF_LIBS2. 213# (4) For cc the optimizer must be disabled (use CFLAGS= after running 214# configure) (symptom: ":set termcap" output looks weird). 215# (5) Compiler may need extra argument, see below. 216# (6) See below for a few lines to uncomment 217# (7) See below for lines which enable the use of clcc 218# (8) Needs some EXTRA_LIBS, search for Unisys below 219# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 220# (A) May need EXTRA_LIBS, see below 221# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 222# (C) Force the use of curses instead of termcap, see below. 223# (D) Uncomment lines below for QNX 224# (E) You might want to use termlib instead of termcap, see below. 225# (F) See below for instructions. 226# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 227# Sun cursus library instead. 228# (H) See line for EXTRA_LIBS below. 229# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 230# (J) If you get undefined symbols, see below for a solution. 231# (K) See lines to uncomment below for machines with 64 bit pointers. 232# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 233# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 234# characters instead of one). 235# (N) SCO with decmouse. 236# (O) LynxOS needs EXTRA_LIBS, see below. 237# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 238# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 239# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 240# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 241# (T) See ../doc/os_beos.txt. 242# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 243# detection, since the configure script runs into an error when it 244# detects Python (probably because of the bash shell). 245# (V) See lines to uncomment below. 246# (X) Need to use the .include "auto/config.mk" line below 247# (Y) See line with c89 below 248# (Z) See lines with cc or c89 below 249# (a) See line with EXTRA_LIBS below. 250# (b) When using gcc with the Solaris linker, make sure you don't use GNU 251# strip, otherwise the binary may not run: "Cannot find ELF". 252# (x) When you get warnings for precompiled header files, run 253# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 254# }}} 255 256 257#DO NOT CHANGE the next line, we need it for configure to find the compiler 258#instead of using the default from the "make" program. 259#Use a line further down to change the value for CC. 260CC= 261 262# Change and use these defines if configure cannot find your Motif stuff. 263# Unfortunately there is no "standard" location for Motif. {{{ 264# These defines can contain a single directory (recommended) or a list of 265# directories (for when you are working with several systems). The LAST 266# directory that exists is used. 267# When changed, run "make reconfig" next! 268#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 269#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 270### Use these two lines for Infomagic Motif (3) 271#GUI_INC_LOC = -I/usr/X11R6/include 272#GUI_LIB_LOC = -L/usr/X11R6/lib 273# }}} 274 275######################## auto/config.mk ######################## {{{1 276# At this position auto/config.mk is included. When starting from the 277# distribution it is almost empty. After running auto/configure it contains 278# settings that have been discovered for your system. Settings below this 279# include override settings in auto/config.mk! 280 281# Note: if auto/config.mk is lost somehow (e.g., because configure was 282# interrupted), create an empty auto/config.mk file and do "make config". 283 284# (X) How to include auto/config.mk depends on the version of "make" you have, 285# if the current choice doesn't work, try the other one. 286 287include auto/config.mk 288#.include "auto/config.mk" 289CClink = $(CC) 290 291#}}} 292 293# Include the configuration choices first, so we can override everything 294# below. As shipped, this file contains a target that causes to run 295# configure. Once configure was run, this file contains a list of 296# make variables with predefined values instead. Thus any second invocation 297# of make, will buid Vim. 298 299# CONFIGURE - configure arguments {{{1 300# You can give a lot of options to configure. 301# Change this to your desire and do 'make config' afterwards 302 303# examples (can only use one!): 304#CONF_ARGS = --exec-prefix=/usr 305#CONF_ARGS = --with-vim-name=vim6 --with-ex-name=ex6 --with-view-name=view6 306#CONF_ARGS = --with-global-runtime=/etc/vim 307 308# Use this one if you distribute a modified version of Vim. 309#CONF_ARGS = --with-modified-by="John Doe" 310 311# GUI - For creating Vim with GUI (gvim) (B) 312# Uncomment this line when you don't want to get the GUI version, although you 313# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 314# at all. 315#CONF_OPT_GUI = --disable-gui 316 317# Uncomment one of these lines if you have that GUI but don't want to use it. 318# The automatic check will use another one that can be found 319# Gnome is disabled by default, it may cause trouble. 320#CONF_OPT_GUI = --disable-gtk-check 321#CONF_OPT_GUI = --disable-gtk2-check 322#CONF_OPT_GUI = --enable-gnome-check 323#CONF_OPT_GUI = --enable-gnome2-check 324#CONF_OPT_GUI = --disable-motif-check 325#CONF_OPT_GUI = --disable-athena-check 326#CONF_OPT_GUI = --disable-nextaw-check 327 328# Uncomment one of these lines to select a specific GUI to use. 329# When using "yes" or nothing, configure will use the first one found: GTK+, 330# Motif or Athena. 331# 332# GTK versions that are known not to work 100% are rejected. 333# Use "--disable-gtktest" to accept them anyway. 334# 335# GNOME means GTK with Gnome support. If using GTK, then GNOME will 336# automatically be used if it is found. If you have GNOME, but do not want to 337# use it (e.g., want a GTK-only version), then use --enable-gui=gtk. 338# 339# KDE doesn't fully work, unfortunately. See the todo list. 340# 341# If the selected GUI isn't found, the GUI is disabled automatically 342#CONF_OPT_GUI = --enable-gui=gtk 343#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest 344#CONF_OPT_GUI = --enable-gui=gtk2 345#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 346#CONF_OPT_GUI = --enable-gui=gnome 347#CONF_OPT_GUI = --enable-gui=gnome2 348#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 349#CONF_OPT_GUI = --enable-gui=kde 350#CONF_OPT_GUI = --enable-gui=motif 351#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 352#CONF_OPT_GUI = --enable-gui=athena 353#CONF_OPT_GUI = --enable-gui=nextaw 354 355# DARWIN - detecting Mac OS X 356# Uncomment this line when you want to compile a Unix version of Vim on 357# Darwin. None of the Mac specific options or files will be used. 358#CONF_OPT_DARWIN = --disable-darwin 359 360# PERL 361# Uncomment this when you want to include the Perl interface. 362# The Perl option sometimes causes problems, because it adds extra flags 363# to the command line. If you see strange flags during compilation, check in 364# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 365# the next line. 366# When you get an error for a missing "perl.exp" file, try creating an emtpy 367# one: "touch perl.exp". 368# This requires at least "small" features, "tiny" doesn't work. 369#CONF_OPT_PERL = --enable-perlinterp 370 371# PYTHON 372# Uncomment this when you want to include the Python interface. 373# NOTE: This may cause threading to be enabled, which has side effects (such 374# as using different libraries and debugging becomes more difficult). 375#CONF_OPT_PYTHON = --enable-pythoninterp 376 377# TCL 378# Uncomment this when you want to include the Tcl interface. 379#CONF_OPT_TCL = --enable-tclinterp 380 381# RUBY 382# Uncomment this when you want to include the Ruby interface. 383#CONF_OPT_RUBY = --enable-rubyinterp 384 385# MZSCHEME 386# Uncomment this when you want to include the MzScheme interface. 387#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 388# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 389#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 390#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 391#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 392 393# CSCOPE 394# Uncomment this when you want to include the Cscope interface. 395#CONF_OPT_CSCOPE = --enable-cscope 396 397# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 398#CONF_OPT_WORKSHOP = --enable-workshop 399 400# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 401# Motif version must have XPM libraries (see |workshop-xpm|). 402# Uncomment this when you do not want the netbeans interface. 403#CONF_OPT_NETBEANS = --disable-netbeans 404 405# SNIFF - Include support for SNiFF+. 406#CONF_OPT_SNIFF = --enable-sniff 407 408# MULTIBYTE - To edit multi-byte characters. 409# Uncomment this when you want to edit a multibyte language. 410# It's automatically enabled with big features or IME support. 411# Note: Compile on a machine where setlocale() actually works, otherwise the 412# configure tests may fail. 413#CONF_OPT_MULTIBYTE = --enable-multibyte 414 415# NLS - National Language Support 416# Uncomment this when you do not want to support translated messages, even 417# though configure can find support for it. 418#CONF_OPT_NLS = --disable-nls 419 420# XIM - X Input Method. Special character input support for X11 (chinese, 421# japanese, special symbols, etc). Also needed for dead-key support. 422# When omitted it's automatically enabled for the X-windows GUI. 423# HANGUL - Input Hangul (korean) language using internal routines. 424# Uncomment one of these when you want to input a multibyte language. 425#CONF_OPT_INPUT = --enable-xim 426#CONF_OPT_INPUT = --disable-xim 427#CONF_OPT_INPUT = --enable-hangulinput 428 429# FONTSET - X fontset support for output of languages with many characters. 430# Uncomment this when you want to output a multibyte language. 431#CONF_OPT_OUTPUT = --enable-fontset 432 433# ACL - Uncomment this when you do not want to include ACL support, even 434# though your system does support it. E.g., when it's buggy. 435#CONF_OPT_ACL = --disable-acl 436 437# gpm - For mouse support on Linux console via gpm 438# Uncomment this when you do not want to include gpm support, even 439# though you have gpm libraries and includes 440#CONF_OPT_GPM = --disable-gpm 441 442# FEATURES - For creating Vim with more or less features 443# Uncomment one of these lines when you want to include few to many features. 444# The default is "normal". 445#CONF_OPT_FEAT = --with-features=tiny 446#CONF_OPT_FEAT = --with-features=small 447#CONF_OPT_FEAT = --with-features=normal 448#CONF_OPT_FEAT = --with-features=big 449#CONF_OPT_FEAT = --with-features=huge 450 451# COMPILED BY - For including a specific e-mail address for ":version". 452#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 453 454# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 455# (otherwise Vim configure will try to include xterm titlebar access) 456# Also disable the GUI above, otherwise it will be included anyway. 457# When both GUI and X11 have been disabled this may save about 15% of the 458# code and make Vim startup quicker. 459#CONF_OPT_X = --without-x 460 461# X WINDOWS DIRECTORY - specify X directories 462# If configure can't find you X stuff, or if you have multiple X11 derivates 463# installed, you may wish to specify which one to use. 464# Select nothing to let configure choose. 465# This here selects openwin (as found on sun). 466#XROOT = /usr/openwin 467#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 468 469# X11 Session Management Protocol support 470# Vim will try to use XSMP to catch the user logging out if there are unsaved 471# files. Uncomment this line to disable that (it prevents vim trying to open 472# communications with the session manager). 473#CONF_OPT_XSMP = --disable-xsmp 474 475# You may wish to include xsmp but use exclude xsmp-interact if the logout 476# XSMP functionality does not work well with your session-manager (at time of 477# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 478# applications after Vim has cancelled a logout (until Vim quits). This 479# *might* be the Vim code, but is more likely a bug in early GNOME-1. 480# This disables the dialog that asks you if you want to save files or not. 481#CONF_OPT_XSMP = --disable-xsmp-interact 482 483# COMPILER - Name of the compiler {{{1 484# The default from configure will mostly be fine, no need to change this, just 485# an example. If a compiler is defined here, configure will use it rather than 486# probing for one. It is dangerous to change this after configure was run. 487# Make will use your choice then -- but beware: Many things may change with 488# another compiler. It is wise to run 'make reconfig' to start all over 489# again. 490#CC = cc 491#CC = gcc 492 493# COMPILER FLAGS - change as you please. Either before running {{{1 494# configure or afterwards. For examples see below. 495# When using -g with some older versions of Linux you might get a 496# statically linked executable. 497# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 498#CFLAGS = -g 499#CFLAGS = -O 500 501# Optimization limits - depends on the compiler. Automatic check in configure 502# doesn't work very well, because many compilers only give a warning for 503# unrecognized arguments. 504#CFLAGS = -O -OPT:Olimit=2600 505#CFLAGS = -O -Olimit 2000 506#CFLAGS = -O -FOlimit,2000 507 508# Often used for GCC: mixed optimizing, lot of optimizing, debugging 509#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 510#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 511#CFLAGS = -g -Wall -Wmissing-prototypes 512#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 513#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 514#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 515 516# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 517# allocated memory (and makes every malloc()/free() very slow). 518# Electric Fence is free (search ftp sites). 519# You may want to set the EF_PROTECT_BELOW environment variable to check the 520# other side of allocated memory. 521# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 522# as root: sysctl -w vm.max_proc_mmap=30000 523#EXTRA_LIBS = /usr/local/lib/libefence.a 524 525# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 526#PURIFY = purify 527# }}} 528 529# LINT - for running lint 530LINT_OPTIONS = -beprxzF 531 532# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 533# Might not work with GUI or Perl. 534# Need to recompile everything after changing this: "make clean" "make". 535#PROFILE_CFLAGS = -pg -g 536#PROFILE_LIBS = -pg 537 538# MEMORY LEAK DETECTION 539# Requires installing the ccmalloc library. 540# Configuration is in the .ccmalloc file. 541# Doesn't work very well, since memory linked to from global variables 542# (indirectly) is also marked as leaked memory. 543#PROFILE_CFLAGS = -DEXITFREE 544#PROFILE_LIBS = -lccmalloc 545 546##################################################### 547### Specific systems, check if yours is listed! ### {{{ 548##################################################### 549 550### Uncomment things here only if the values chosen by configure are wrong. 551### It's better to adjust configure.in and "make autoconf", if you can! 552### Then send the required changes to configure.in to the bugs list. 553 554### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 555### 556#CC = shlicc2 557#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 558 559### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 560### The first probably works on all systems 561### The second should work a bit better on newer systems 562### The third should work a bit better on HPUX 11.11 563### Information provided by: Richard Allen <[email protected]> 564#CC = c89 -D_HPUX_SOURCE 565#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 566#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 567 568### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 569### when the default (ISO) digraphs look completely wrong. 570### After changing this do "touch digraph.c; make". 571#EXTRA_DEFS = -DHPUX_DIGRAPHS 572 573### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 574### is too small to compile many routines. It produces too much defining 575### and no space errors. 576### Uncomment the following to specify a larger macro definition table. 577#CFLAGS = -Wp,-H256000 578 579### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 580### libraries in /usr/lib instead of /lib (avoiding transition links). 581### Information provided by: David Green 582#XROOT = /usr 583#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 584#GUI_INC_LOC = -I/usr/include/Motif1.2 585#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 586 587### (5) AIX 4.1.4 with cc 588#CFLAGS = -O -qmaxmem=8192 589 590### AIX with c89 (Walter Briscoe) 591#CC = c89 592#CPPFLAGS = -D_ALL_SOURCE 593 594### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 595# needed to avoid a problem where strings.h gets included 596#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 597 598### (W) Solaris with multi-threaded libraries (-lthread): 599### If suspending doesn't work properly, try using this line: 600#EXTRA_DEFS = -D_REENTRANT 601 602### (7) Solaris 2.4/2.5 with Centerline compiler 603#CC = clcc 604#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 605#CFLAGS = -O 606 607### (9) Solaris 2.x with cc (SunPro), using Athena. 608### Only required for compiling gui_at_sb.c. 609### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 610### Use one of the lines (either Full ANSI or no ANSI at all) 611#CFLAGS = $(CFLAGS) -Xc 612#CFLAGS = $(CFLAGS) -Xs 613 614### Solaris 2.3 with X11 and specific cc 615#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 616 617### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 618#CC = /usr/ucb/cc 619#EXTRA_LIBS = -R/usr/ucblib 620 621### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 622# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 623#CC = cc 624#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 625#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 626#XPM_IPATH = -I$(XPM_DIR)/include 627#EXTRA_LIBS = $(XPM_LIB) 628#EXTRA_IPATHS = $(XPM_IPATH) 629#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 630 631### Solaris with workshop compilers: Vim is unstable when compiled with 632# "-fast". Use this instead. (Shea Martin) 633#CFLAGS = -x02 -xtarget=ultra 634 635### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 636#LDFLAGS = -lw -ldl -lXmu 637#GUI_LIB_LOC = -L/usr/local/lib 638 639### (8) Unisys 6035 (Glauber Ribeiro) 640#EXTRA_LIBS = -lnsl -lsocket -lgen 641 642### When builtin functions cause problems with gcc (for Sun 4.1.x) 643#CFLAGS = -O2 -Wall -traditional -Wno-implicit 644 645### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 646#EXTRA_DEFS = -DDOMAIN 647#CFLAGS= -O -A systype,bsd4.3 648 649### Coherent 4.2.10 on Intel 386 platform 650#EXTRA_DEFS = -Dvoid=int 651#EXTRA_LIBS = -lterm -lsocket 652 653### SCO 3.2, with different library name for terminfo 654#EXTRA_LIBS = -ltinfo 655 656### UTS2 for Amdahl UTS 2.1.x 657#EXTRA_DEFS = -DUTS2 658#EXTRA_LIBS = -lsocket 659 660### UTS4 for Amdahl UTS 4.x 661#EXTRA_DEFS = -DUTS4 -Xa 662 663### USL for Unix Systems Laboratories (SYSV 4.2) 664#EXTRA_DEFS = -DUSL 665 666### RISCos on MIPS without X11 667#EXTRA_DEFS = -DMIPS 668 669### RISCos on MIPS with X11 670#EXTRA_LIBS = -lsun 671 672### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 673#CC= gcc -D_POSIX_SOURCE 674#CFLAGS= -O2 675#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 676 677### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 678### Also use the CONF_TERM_LIB below! 679#EXTRA_LIBS = -lgen 680 681### (D) QNX (by G.F. Desrochers) 682#CFLAGS = -g -O -mf -4 683 684### (F) QNX (by John Oleynick) 685# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 686# CONF_OPT_X = --without-x. 687# 2. make config 688# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 689# have -ldir (does config find it somewhere?) and -ltermcap has at 690# least one problem so I use termlib.o instead. The problem with 691# termcap is that it segfaults if you call it with the name of 692# a non-existent terminal type. 693# 4. edit auto/config.h and add #define USE_TMPNAM 694# 5. add termlib.o to OBJ 695# 6. make 696 697### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 698#EXTRA_LIBS = -lgen 699 700### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 701#EXTRA_LIBS = -lgen -lnsl 702### For SINIX-Y this is needed for the right prototype of gettimeofday() 703#EXTRA_DEFS = -D_XPG_IV 704 705### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 706# Use both "-F O3" lines for optimization or the "-g" line for debugging 707#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 708#CFLAGS = -F O3 -DSINIXN 709#LDFLAGS = -F O3 710#CFLAGS = -g -DSINIXN 711 712### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 713#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 714#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 715 716### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 717#GUI_INC_LOC = -I/usr/include 718#GUI_LIB_LOC = -L/usr/lib 719#EXTRA_LIBS = -lgen 720 721### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 722#GUI_INC_LOC = -I/usr/necccs/include 723#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 724#XROOT = /usr/necccs 725#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 726#EXTRA_LIBS = -lsocket -lgen 727 728### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 729# Not needed for Irix 5.3, Ives Aerts reported 730#EXTRA_LIBS = -lmalloc -lc_s 731# Irix 4.0, when regexp and regcmp cannot be found when linking: 732#EXTRA_LIBS = -lmalloc -lc_s -lPW 733 734### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 735# Note: This newer option style is used with the MipsPro compilers ONLY if 736# you are compiling an "n32" or "64" ABI binary (use either a -n32 737# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 738# then the CFLAGS option format will be the typical style (i.e. 739# -Olimit 3000). 740#CFLAGS = -OPT:Olimit=3000 -O 741 742### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 743# compiler features! Beware, the optimization is EXTREMELY thorough 744# and takes quite a long time. 745# Note: See the note above. Here, the -mips3 option automatically 746# enables either the "n32" or "64" ABI, depending on what machine you 747# are compiling on (n32 is explicitly enabled here, just to make sure). 748#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 749#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 750 751### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 752### Suggested by Jon Wright <[email protected]>. 753### Tested on R8000 IRIX6.1 Power Indigo2. 754### Check /etc/compiler.defaults for your compiler settings. 755# either (for 64 bit pointers) uncomment the following line 756#GUI_LIB_LOC = -L/usr/lib64 757# then 758# 1) make config 759# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 760# 3) make 761# 762# or (for 32bit pointers) uncomment the following line 763#EXTRA_DEFS = -n32 764#GUI_LIB_LOC = -L/usr/lib32 765# then 766# 1) make config 767# 2) edit auto/config.mk, add -n32 to LDFLAGS 768# 3) make 769### 770 771### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 772### which is found by configure, doesn't work correctly. Symptom is the 773### error message "Termcap entry too long". Uncomment the next line. 774### On AIX 4.2.1 (and other versions probably), libtermcap is reported 775### not to display properly. 776### after changing this, you need to do "make reconfig". 777#CONF_TERM_LIB = --with-tlib=curses 778 779### (E) If you want to use termlib library instead of the automatically found 780### one. After changing this, you need to do "make reconfig". 781#CONF_TERM_LIB = --with-tlib=termlib 782 783### (a) ESIX V4.2 (Reinhard Wobst) 784#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 785 786### If you want to use ncurses library instead of the automatically found one 787### after changing this, you need to do "make reconfig". 788#CONF_TERM_LIB = --with-tlib=ncurses 789 790### For GCC on MSDOS, the ".exe" suffix will be added. 791#EXEEXT = .exe 792#LNKEXT = .exe 793 794### (O) For LynxOS 2.5.0, tested on PC. 795#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 796### For LynxOS 3.0.1, tested on PPC 797#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 798### For LynxOS 3.1.0, tested on PC 799#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 800 801 802### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 803### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 804#CFLAGS = -O -Qtarget=m88110compat 805#EXTRA_LIBS = -lgen 806 807##################### end of system specific lines ################### }}} 808 809### Names of the programs and targets {{{1 810VIMTARGET = $(VIMNAME)$(EXEEXT) 811EXTARGET = $(EXNAME)$(LNKEXT) 812VIEWTARGET = $(VIEWNAME)$(LNKEXT) 813GVIMNAME = g$(VIMNAME) 814GVIMTARGET = $(GVIMNAME)$(LNKEXT) 815GVIEWNAME = g$(VIEWNAME) 816GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 817RVIMNAME = r$(VIMNAME) 818RVIMTARGET = $(RVIMNAME)$(LNKEXT) 819RVIEWNAME = r$(VIEWNAME) 820RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 821RGVIMNAME = r$(GVIMNAME) 822RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 823RGVIEWNAME = r$(GVIEWNAME) 824RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 825VIMDIFFNAME = $(VIMNAME)diff 826GVIMDIFFNAME = g$(VIMDIFFNAME) 827VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 828GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 829EVIMNAME = e$(VIMNAME) 830EVIMTARGET = $(EVIMNAME)$(LNKEXT) 831EVIEWNAME = e$(VIEWNAME) 832EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 833 834### Names of the tools that are also made {{{1 835TOOLS = xxd/xxd$(EXEEXT) 836 837### Installation directories. The defaults come from configure. {{{1 838# 839### prefix the top directory for the data (default "/usr/local") 840# 841# Uncomment the next line to install Vim in your home directory. 842#prefix = $(HOME) 843 844### exec_prefix is the top directory for the executable (default $(prefix)) 845# 846# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 847#exec_prefix = /usr/machine 848 849### BINDIR dir for the executable (default "$(exec_prefix)/bin") 850### MANDIR dir for the manual pages (default "$(prefix)/man") 851### DATADIR dir for the other files (default "$(prefix)/lib" or 852# "$(prefix)/share") 853# They may be different when using different architectures for the 854# executable and a common directory for the other files. 855# 856# Uncomment the next line to install Vim in "/usr/bin" 857#BINDIR = /usr/bin 858# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 859#MANDIR = /usr/share/man 860# Uncomment the next line to install Vim help files in "/usr/share/vim" 861#DATADIR = /usr/share 862 863### DESTDIR root of the installation tree. This is prepended to the other 864# directories. This directory must exist. 865#DESTDIR = ~/pkg/vim 866 867### Directory of the man pages 868MAN1DIR = /man1 869 870### Vim version (adjusted by a script) 871VIMMAJOR = 7 872VIMMINOR = 0aa 873 874### Location of Vim files (should not need to be changed, and {{{1 875### some things might not work when they are changed!) 876VIMDIR = /vim 877VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 878HELPSUBDIR = /doc 879COLSUBDIR = /colors 880SYNSUBDIR = /syntax 881INDSUBDIR = /indent 882AUTOSUBDIR = /autoload 883PLUGSUBDIR = /plugin 884FTPLUGSUBDIR = /ftplugin 885LANGSUBDIR = /lang 886COMPSUBDIR = /compiler 887KMAPSUBDIR = /keymap 888MACROSUBDIR = /macros 889TOOLSSUBDIR = /tools 890TUTORSUBDIR = /tutor 891SPELLSUBDIR = /spell 892PRINTSUBDIR = /print 893PODIR = po 894 895### VIMLOC common root of the Vim files (all versions) 896### VIMRTLOC common root of the runtime Vim files (this version) 897### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 898### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 899### HELPSUBLOC location for help files 900### COLSUBLOC location for colorscheme files 901### SYNSUBLOC location for syntax files 902### INDSUBLOC location for indent files 903### AUTOSUBLOC location for standard autoload files 904### PLUGSUBLOC location for standard plugin files 905### FTPLUGSUBLOC location for ftplugin files 906### LANGSUBLOC location for language files 907### COMPSUBLOC location for compiler files 908### KMAPSUBLOC location for keymap files 909### MACROSUBLOC location for macro files 910### TOOLSSUBLOC location for tools files 911### TUTORSUBLOC location for tutor files 912### SPELLSUBLOC location for spell files 913### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 914### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 915### You can override these if you want to install them somewhere else. 916### Edit feature.h for compile-time settings. 917VIMLOC = $(DATADIR)$(VIMDIR) 918VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 919VIMRCLOC = $(VIMLOC) 920HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 921COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 922SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 923INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 924AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 925PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 926FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 927LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 928COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 929KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 930MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 931TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 932TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 933SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 934PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 935SCRIPTLOC = $(VIMRTLOC) 936 937### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 938### the runtime directory is not below it. 939#VIMRUNTIMEDIR = $(VIMRTLOC) 940 941### Name of the evim file target. 942EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 943MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 944 945### Name of the menu file target. 946SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 947SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 948SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 949 950### Name of the bugreport file target. 951SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 952 953### Name of the file type detection file target. 954SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 955 956### Name of the file type detection file target. 957SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 958 959### Name of the file type detection script file target. 960SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 961 962### Name of the ftplugin-on file target. 963SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 964 965### Name of the ftplugin-off file target. 966SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 967 968### Name of the indent-on file target. 969SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 970 971### Name of the indent-off file target. 972SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 973 974### Name of the option window script file target. 975SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 976 977# Program to install the program in the target directory. Could also be "mv". 978INSTALL_PROG = cp 979 980# Program to install the data in the target directory. Cannot be "mv"! 981INSTALL_DATA = cp 982INSTALL_DATA_R = cp -r 983 984### Program to run on installed binary 985#STRIP = strip 986 987### Permissions for binaries {{{1 988BINMOD = 755 989 990### Permissions for man page 991MANMOD = 644 992 993### Permissions for help files 994HELPMOD = 644 995 996### Permissions for Perl and shell scripts 997SCRIPTMOD = 755 998 999### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1000VIMSCRIPTMOD = 644 1001 1002### Permissions for all directories that are created 1003DIRMOD = 755 1004 1005### Permissions for all other files that are created 1006FILEMOD = 644 1007 1008# Where to copy the man and help files from 1009HELPSOURCE = ../runtime/doc 1010 1011# Where to copy the script files from (menu, bugreport) 1012SCRIPTSOURCE = ../runtime 1013 1014# Where to copy the colorscheme files from 1015COLSOURCE = ../runtime/colors 1016 1017# Where to copy the syntax files from 1018SYNSOURCE = ../runtime/syntax 1019 1020# Where to copy the indent files from 1021INDSOURCE = ../runtime/indent 1022 1023# Where to copy the standard plugin files from 1024AUTOSOURCE = ../runtime/autoload 1025 1026# Where to copy the standard plugin files from 1027PLUGSOURCE = ../runtime/plugin 1028 1029# Where to copy the ftplugin files from 1030FTPLUGSOURCE = ../runtime/ftplugin 1031 1032# Where to copy the macro files from 1033MACROSOURCE = ../runtime/macros 1034 1035# Where to copy the tools files from 1036TOOLSSOURCE = ../runtime/tools 1037 1038# Where to copy the tutor files from 1039TUTORSOURCE = ../runtime/tutor 1040 1041# Where to copy the spell files from 1042SPELLSOURCE = ../runtime/spell 1043 1044# Where to look for language specific files 1045LANGSOURCE = ../runtime/lang 1046 1047# Where to look for compiler files 1048COMPSOURCE = ../runtime/compiler 1049 1050# Where to look for keymap files 1051KMAPSOURCE = ../runtime/keymap 1052 1053# Where to look for print resource files 1054PRINTSOURCE = ../runtime/print 1055 1056# If you are using Linux, you might want to use this to make vim the 1057# default vi editor, it will create a link from vi to Vim when doing 1058# "make install". An existing file will be overwritten! 1059# When not using it, some make programs can't handle an undefined $(LINKIT). 1060#LINKIT = -ln -f -s $(BINDIR)/$(VIMTARGET) /usr/bin/vi 1061LINKIT = @echo >/dev/null 1062 1063### 1064### GRAPHICAL USER INTERFACE (GUI). {{{1 1065### 'configure --enable-gui' can enable one of these for you if you did set 1066### a corresponding CONF_OPT_GUI above and have X11. 1067### Override configures choice by uncommenting all the following lines. 1068### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1069### for enabling the Athena or Motif GUI. 1070#GUI_SRC = $(NONE_SRC) 1071#GUI_OBJ = $(NONE_OBJ) 1072#GUI_DEFS = $(NONE_DEFS) 1073#GUI_IPATH = $(NONE_IPATH) 1074#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1075#GUI_LIBS1 = $(NONE_LIBS1) 1076#GUI_LIBS2 = $(NONE_LIBS2) 1077#GUI_INSTALL = $(NONE_INSTALL) 1078#GUI_TARGETS = $(NONE_TARGETS) 1079#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1080#GUI_TESTTARGET = $(NONE_TESTTARGET) 1081#GUI_BUNDLE = $(NONE_BUNDLE) 1082 1083# Without a GUI install the normal way. 1084NONE_INSTALL = install_normal 1085 1086### KDE GUI interface. 1087KDE_SRC = gui.c pty.c gui_kde.cc gui_kde_x11.cc gui_kde_wid.cc gui_kde_wid_moc.cc kvim_iface_skel.cc 1088KDE_OBJ = objects/gui.o objects/pty.o objects/gui_kde.o objects/gui_kde_x11.o \ 1089 objects/gui_kde_wid.o objects/gui_kde_wid_moc.o \ 1090 objects/kvim_iface_skel.o 1091KDE_DEFS = -DFEAT_GUI_KDE $(NARROW_PROTO) 1092KDE_IPATH = $(GUI_INC_LOC) 1093KDE_LIBS_DIR = $(GUI_LIB_LOC) # Includes the libraries themselves 1094KDE_DIR = $(KDE_PREFIX) 1095KDE_LIBS1 = 1096KDE_LIBS2 = 1097KDE_INSTALL = install_normal 1098KDE_TARGETS = installglinks installkdeicons 1099KDE_MAN_TARGETS = yes 1100KDE_TESTTARGET = gui 1101KDE_BUNDLE = 1102 1103### GTK GUI 1104GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1105 gui_beval.c 1106GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1107 objects/pty.o objects/gui_gtk_f.o \ 1108 objects/gui_beval.o 1109GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1110GTK_IPATH = $(GUI_INC_LOC) 1111GTK_LIBS_DIR = $(GUI_LIB_LOC) 1112GTK_LIBS1 = 1113GTK_LIBS2 = $(GTK_LIBNAME) 1114GTK_INSTALL = install_normal 1115GTK_TARGETS = installglinks 1116GTK_MAN_TARGETS = yes 1117GTK_TESTTARGET = gui 1118GTK_BUNDLE = 1119 1120### Motif GUI 1121MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1122 gui_xmdlg.c gui_xmebw.c 1123MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1124 objects/pty.o objects/gui_beval.o \ 1125 objects/gui_xmdlg.o objects/gui_xmebw.o 1126MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1127MOTIF_IPATH = $(GUI_INC_LOC) 1128MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1129MOTIF_LIBS1 = 1130MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1131MOTIF_INSTALL = install_normal 1132MOTIF_TARGETS = installglinks 1133MOTIF_MAN_TARGETS = yes 1134MOTIF_TESTTARGET = gui 1135MOTIF_BUNDLE = 1136 1137### Athena GUI 1138### Use Xaw3d to make the menus look a little bit nicer 1139#XAW_LIB = -lXaw3d 1140XAW_LIB = -lXaw 1141 1142### When using Xaw3d, uncomment/comment the following lines to also get the 1143### scrollbars from Xaw3d. 1144#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1145#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1146# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1147#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1148# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1149# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1150ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1151 gui_at_sb.c gui_at_fs.c 1152ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1153 objects/pty.o objects/gui_beval.o \ 1154 objects/gui_at_sb.o objects/gui_at_fs.o 1155ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1156 1157ATHENA_IPATH = $(GUI_INC_LOC) 1158ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1159ATHENA_LIBS1 = $(XAW_LIB) 1160ATHENA_LIBS2 = -lXt 1161ATHENA_INSTALL = install_normal 1162ATHENA_TARGETS = installglinks 1163ATHENA_MAN_TARGETS = yes 1164ATHENA_TESTTARGET = gui 1165ATHENA_BUNDLE = 1166 1167### neXtaw GUI 1168NEXTAW_LIB = -lneXtaw 1169 1170NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1171NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1172 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1173NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1174 1175NEXTAW_IPATH = $(GUI_INC_LOC) 1176NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1177NEXTAW_LIBS1 = $(NEXTAW_LIB) 1178NEXTAW_LIBS2 = -lXt 1179NEXTAW_INSTALL = install_normal 1180NEXTAW_TARGETS = installglinks 1181NEXTAW_MAN_TARGETS = yes 1182NEXTAW_TESTTARGET = gui 1183NEXTAW_BUNDLE = 1184 1185### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1186# errors: ld: Undefined symbol 1187# _get_wmShellWidgetClass 1188# _get_applicationShellWidgetClass 1189# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1190# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1191#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1192# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1193# too: 1194#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1195 1196# PHOTON GUI 1197PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1198PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1199PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1200PHOTONGUI_IPATH = 1201PHOTONGUI_LIBS_DIR = 1202PHOTONGUI_LIBS1 = -lph -lphexlib 1203PHOTONGUI_LIBS2 = 1204PHOTONGUI_INSTALL = install_normal 1205PHOTONGUI_TARGETS = installglinks 1206PHOTONGUI_MAN_TARGETS = yes 1207PHOTONGUI_TESTTARGET = gui 1208PHOTONGUI_BUNDLE = 1209 1210# CARBON GUI 1211CARBONGUI_SRC = gui.c gui_mac.c 1212CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1213CARBONGUI_DEFS = -DFEAT_GUI_MAC -arch ppc -fno-common -fpascal-strings \ 1214 -Wall -Wno-unknown-pragmas \ 1215 -mdynamic-no-pic -pipe 1216CARBONGUI_IPATH = -I. -Iproto 1217CARBONGUI_LIBS_DIR = 1218CARBONGUI_LIBS1 = -framework Carbon 1219CARBONGUI_LIBS2 = 1220CARBONGUI_INSTALL = install_macosx 1221CARBONGUI_TARGETS = 1222CARBONGUI_MAN_TARGETS = 1223CARBONGUI_TESTTARGET = gui 1224CARBONGUI_BUNDLE = gui_bundle 1225APPDIR = $(VIMNAME).app 1226CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1227 1228# All GUI files 1229ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c gui_kde.cc gui_kde_wid.cc gui_kde_x11.cc gui_kde_wid_moc.cc 1230ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1231 1232# }}} 1233 1234### Command to create dependencies based on #include "..." 1235### prototype headers are ignored due to -DPROTO, system 1236### headers #include <...> are ignored if we use the -MM option, as 1237### e.g. provided by gcc-cpp. 1238### Include FEAT_GUI to get gependency on gui.h 1239CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) $(DEPEND_CFLAGS) 1240 1241# flags for cproto 1242# This is for cproto 3 patchlevel 8 or below 1243# __inline, __attribute__ and __extension__ are not recognized by cproto 1244NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1245 -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1246 -D__extension__= -D__restrict="" \ 1247 -D__gnuc_va_list=char -D__builtin_va_list=char 1248 1249# 1250# This is for cproto 3 patchlevel 9 or above (currently 4.6) 1251# __inline and __attribute__ are now recognized by cproto 1252# -D"foo()=" is not supported by all compilers so do not use it 1253# NO_ATTR= 1254# 1255# maybe the "/usr/bin/cc -E" has to be adjusted for some systems 1256# This is for cproto 3.5 patchlevel 3: 1257# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1258# 1259# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1260# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1261# 1262# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1263PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1264 1265 1266################################################ 1267## no changes required below this line ## 1268################################################ 1269 1270SHELL = /bin/sh 1271 1272.SUFFIXES: 1273.SUFFIXES: .cc .c .o .pro 1274 1275PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1276POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1277 1278ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1279 1280LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca 1281 1282LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1283 1284DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1285 1286PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS) 1287 1288ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1289ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS) 1290 1291# abbreviations 1292DEST_BIN = $(DESTDIR)$(BINDIR) 1293DEST_VIM = $(DESTDIR)$(VIMLOC) 1294DEST_RT = $(DESTDIR)$(VIMRTLOC) 1295DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1296DEST_COL = $(DESTDIR)$(COLSUBLOC) 1297DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1298DEST_IND = $(DESTDIR)$(INDSUBLOC) 1299DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1300DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1301DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1302DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1303DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1304DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1305DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1306DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1307DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1308DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1309DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1310DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1311DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1312 1313# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1314# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1315# directory first. 1316# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1317DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1318DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1319DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1320DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1321DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1322DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1323DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1324DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1325DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1326 1327# BASIC_SRC: files that are always used 1328# GUI_SRC: extra GUI files for current configuration 1329# ALL_GUI_SRC: all GUI files for Unix 1330# 1331# SRC: files used for current configuration 1332# TAGS_SRC: source files used for make tags 1333# TAGS_INCL: include files used for make tags 1334# ALL_SRC: source files used for make depend and make lint 1335 1336TAGS_INCL = *.h 1337 1338BASIC_SRC = \ 1339 buffer.c \ 1340 charset.c \ 1341 diff.c \ 1342 digraph.c \ 1343 edit.c \ 1344 eval.c \ 1345 ex_cmds.c \ 1346 ex_cmds2.c \ 1347 ex_docmd.c \ 1348 ex_eval.c \ 1349 ex_getln.c \ 1350 fileio.c \ 1351 fold.c \ 1352 getchar.c \ 1353 hardcopy.c \ 1354 hashtable.c \ 1355 if_cscope.c \ 1356 if_xcmdsrv.c \ 1357 main.c \ 1358 mark.c \ 1359 memfile.c \ 1360 memline.c \ 1361 menu.c \ 1362 message.c \ 1363 misc1.c \ 1364 misc2.c \ 1365 move.c \ 1366 mbyte.c \ 1367 normal.c \ 1368 ops.c \ 1369 option.c \ 1370 os_unix.c \ 1371 auto/pathdef.c \ 1372 quickfix.c \ 1373 regexp.c \ 1374 screen.c \ 1375 search.c \ 1376 spell.c \ 1377 syntax.c \ 1378 tag.c \ 1379 term.c \ 1380 ui.c \ 1381 undo.c \ 1382 version.c \ 1383 window.c \ 1384 $(OS_EXTRA_SRC) 1385 1386SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \ 1387 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \ 1388 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) 1389 1390TAGS_SRC = *.c *.cpp *.cc if_perl.xs 1391 1392EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1393 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \ 1394 workshop.c wsdebug.c integration.c netbeans.c 1395 1396# All sources, also the ones that are not configured 1397ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1398 1399# Which files to check with lint. Select one of these three lines. ALL_SRC 1400# checks more, but may not work well for checking a GUI that wasn't configured. 1401# The perl sources also don't work well with lint. 1402LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \ 1403 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1404#LINT_SRC = $(SRC) 1405#LINT_SRC = $(ALL_SRC) 1406 1407OBJ = \ 1408 objects/buffer.o \ 1409 objects/charset.o \ 1410 objects/diff.o \ 1411 objects/digraph.o \ 1412 objects/edit.o \ 1413 objects/eval.o \ 1414 objects/ex_cmds.o \ 1415 objects/ex_cmds2.o \ 1416 objects/ex_docmd.o \ 1417 objects/ex_eval.o \ 1418 objects/ex_getln.o \ 1419 objects/fileio.o \ 1420 objects/fold.o \ 1421 objects/getchar.o \ 1422 objects/hardcopy.o \ 1423 objects/hashtable.o \ 1424 $(HANGULIN_OBJ) \ 1425 objects/if_cscope.o \ 1426 objects/if_xcmdsrv.o \ 1427 objects/main.o \ 1428 objects/mark.o \ 1429 objects/memfile.o \ 1430 objects/memline.o \ 1431 objects/menu.o \ 1432 objects/message.o \ 1433 objects/misc1.o \ 1434 objects/misc2.o \ 1435 objects/move.o \ 1436 objects/mbyte.o \ 1437 objects/normal.o \ 1438 objects/ops.o \ 1439 objects/option.o \ 1440 objects/os_unix.o \ 1441 objects/pathdef.o \ 1442 objects/quickfix.o \ 1443 objects/regexp.o \ 1444 objects/screen.o \ 1445 objects/search.o \ 1446 objects/spell.o \ 1447 objects/syntax.o \ 1448 $(SNIFF_OBJ) \ 1449 objects/tag.o \ 1450 objects/term.o \ 1451 objects/ui.o \ 1452 objects/undo.o \ 1453 objects/window.o \ 1454 $(GUI_OBJ) \ 1455 $(MZSCHEME_OBJ) \ 1456 $(PERL_OBJ) \ 1457 $(PYTHON_OBJ) \ 1458 $(TCL_OBJ) \ 1459 $(RUBY_OBJ) \ 1460 $(OS_EXTRA_OBJ) \ 1461 $(WORKSHOP_OBJ) \ 1462 $(NETBEANS_OBJ) \ 1463 $(WSDEBUG_OBJ) 1464 1465PRO_AUTO = \ 1466 buffer.pro \ 1467 charset.pro \ 1468 diff.pro \ 1469 digraph.pro \ 1470 edit.pro \ 1471 eval.pro \ 1472 ex_cmds.pro \ 1473 ex_cmds2.pro \ 1474 ex_docmd.pro \ 1475 ex_eval.pro \ 1476 ex_getln.pro \ 1477 fileio.pro \ 1478 fold.pro \ 1479 getchar.pro \ 1480 hardcopy.pro \ 1481 hashtable.pro \ 1482 hangulin.pro \ 1483 if_cscope.pro \ 1484 if_xcmdsrv.pro \ 1485 if_python.pro \ 1486 if_ruby.pro \ 1487 main.pro \ 1488 mark.pro \ 1489 memfile.pro \ 1490 memline.pro \ 1491 menu.pro \ 1492 message.pro \ 1493 misc1.pro \ 1494 misc2.pro \ 1495 move.pro \ 1496 mbyte.pro \ 1497 normal.pro \ 1498 ops.pro \ 1499 option.pro \ 1500 os_unix.pro \ 1501 quickfix.pro \ 1502 regexp.pro \ 1503 screen.pro \ 1504 search.pro \ 1505 spell.pro \ 1506 syntax.pro \ 1507 tag.pro \ 1508 term.pro \ 1509 termlib.pro \ 1510 ui.pro \ 1511 undo.pro \ 1512 version.pro \ 1513 window.pro \ 1514 gui_beval.pro \ 1515 workshop.pro \ 1516 netbeans.pro \ 1517 $(ALL_GUI_PRO) \ 1518 $(TCL_PRO) 1519 1520PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1521 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1522 1523# Default target is making the executable and tools 1524all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1525 1526tools: $(TOOLS) 1527 1528# Run configure with all the setting from above. 1529# 1530# Note: auto/config.h doesn't depend on configure, because running configure 1531# doesn't always update auto/config.h. The timestamp isn't changed if the 1532# file contents didn't change (to avoid recompiling everything). Including a 1533# dependency on auto/config.h would cause running configure each time when 1534# auto/config.h isn't updated. The dependency on auto/config.mk should make 1535# sure configure is run when it's needed. 1536# 1537config auto/config.mk: auto/configure config.mk.in config.h.in 1538 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1539 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1540 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1541 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1542 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \ 1543 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1544 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1545 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1546 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1547 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1548 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) 1549 1550# Use "make reconfig" to rerun configure without cached values. 1551# When config.h changes, most things will be recompiled automatically. 1552# Invoke $(MAKE) to run config with the empty auto/config.mk. 1553# Invoke $(MAKE) to build all with the filled auto/config.mk. 1554reconfig: scratch clean 1555 $(MAKE) -f Makefile config 1556 $(MAKE) -f Makefile all 1557 1558# Run autoconf to produce auto/configure. 1559# Note: 1560# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1561# producing auto/configure. 1562# - autoconf is not run automatically, because a patch usually changes both 1563# configure.in and auto/configure but can't update the timestamps. People 1564# who do not have (the correct version of) autoconf would run into trouble. 1565# 1566# Two tricks are required to make autoconf put its output in the "auto" dir: 1567# - Temporarily move the ./configure script to ./configure.save. Don't 1568# overwrite it, it's probably the result of an aborted autoconf. 1569# - Use sed to change ./config.log to auto/config.log in the configure script. 1570# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1571# care of: 1572# - configure.lineno: has the line numbers replaced with $LINENO. That 1573# improves patches a LOT, thus use it instead (until someone says it doesn't 1574# work on some system). 1575# - autom4te.cache directory is created and not cleaned up. Delete it. 1576# - Uses ">config.log" instead of "./config.log". 1577autoconf: 1578 if test ! -f configure.save; then mv configure configure.save; fi 1579 autoconf 1580 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1581 chmod 755 auto/configure 1582 mv -f configure.save configure 1583 -rm -rf autom4te.cache 1584 -rm -f auto/config.status auto/config.cache 1585 1586# Re-execute this Makefile to include the new auto/config.mk produced by 1587# configure Only used when typing "make" with a fresh auto/config.mk. 1588myself: 1589 $(MAKE) -f Makefile all 1590 1591 1592# The normal command to compile a .c file to its .o file. 1593CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1594 1595 1596# Link the target for normal use or debugging. 1597# A shell script is used to try linking without unneccesary libraries. 1598$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1599 $(CCC) version.c -o objects/version.o 1600 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1601 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1602 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1603 1604xxd/xxd$(EXEEXT): xxd/xxd.c 1605 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1606 $(MAKE) -f Makefile 1607 1608# Build the language specific files if they were unpacked. 1609# Generate the converted .mo files separately, it's no problem if this fails. 1610languages: 1611 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1612 cd $(PODIR); \ 1613 CC="$(CC)" $(MAKE) check; \ 1614 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1615 fi 1616 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1617 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1618 fi 1619 1620# Update the *.po files for changes in the sources. Only run manually. 1621update-po: 1622 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1623 1624# Generate function prototypes. This is not needed to compile vim, but if 1625# you want to use it, cproto is out there on the net somewhere -- Webb 1626# 1627# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1628# few include files that can not be found, that's OK. 1629 1630proto: $(PRO_AUTO) $(PRO_MANUAL) 1631 1632### Would be nice if this would work for "normal" make. 1633### Currently it only works for (Free)BSD make. 1634#$(PRO_AUTO): $$(*F).c 1635# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@ 1636 1637# Always define FEAT_GUI. This may generate a few warnings if it's also 1638# defined in auto/config.h, you can ignore that. 1639.c.pro: 1640 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@ 1641 echo "/* vim: set ft=c : */" >> proto/$@ 1642 1643os_amiga.pro: os_amiga.c 1644 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1645 echo "/* vim: set ft=c : */" >> proto/$@ 1646 1647os_msdos.pro: os_msdos.c 1648 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1649 echo "/* vim: set ft=c : */" >> proto/$@ 1650 1651os_win16.pro: os_win16.c 1652 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1653 echo "/* vim: set ft=c : */" >> proto/$@ 1654 1655os_win32.pro: os_win32.c 1656 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1657 echo "/* vim: set ft=c : */" >> proto/$@ 1658 1659os_mswin.pro: os_mswin.c 1660 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1661 echo "/* vim: set ft=c : */" >> proto/$@ 1662 1663os_beos.pro: os_beos.c 1664 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1665 echo "/* vim: set ft=c : */" >> proto/$@ 1666 1667os_vms.pro: os_vms.c 1668# must use os_vms_conf.h for auto/config.h 1669 mv auto/config.h auto/config.h.save 1670 cp os_vms_conf.h auto/config.h 1671 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1672 echo "/* vim: set ft=c : */" >> proto/$@ 1673 rm auto/config.h 1674 mv auto/config.h.save auto/config.h 1675 1676# if_perl.pro is special: Use the generated if_perl.c for input and remove 1677# prototypes for local functions. 1678if_perl.pro: auto/if_perl.c 1679 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1680 1681 1682notags: 1683 -rm -f tags 1684 1685# Note: tags is made for the currently configured version, can't include both 1686# Motif and Athena GUI 1687# You can ignore error messages for missing files. 1688tags TAGS: notags 1689 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1690 1691# Make a highlight file for types. Requires Exuberant ctags and awk 1692types: types.vim 1693types.vim: $(TAGS_SRC) $(TAGS_INCL) 1694 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1695 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1696 {printf("%s ", $$1)}END{print ""}' > $@ 1697 1698# Execute the test scripts. Run these after compiling Vim, before installing. 1699# This doesn't depend on $(VIMTARGET), because that won't work when configure 1700# wasn't run yet. Restart make to build it instead. 1701# 1702# This will produce a lot of garbage on your screen, including a few error 1703# messages. Don't worry about that. 1704# If there is a real error, there will be a difference between "test.out" and 1705# a "test99.ok" file. 1706# If everything is allright, the final message will be "ALL DONE". 1707# 1708test check: 1709 $(MAKE) -f Makefile $(VIMTARGET) 1710 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1711 1712testclean: 1713 cd testdir; $(MAKE) -f Makefile clean 1714 1715# 1716# Avoid overwriting an existing executable, somebody might be running it and 1717# overwriting it could cause it to crash. Deleting it is OK, it won't be 1718# really deleted until all running processes for it have exited. It is 1719# renamed first, in case the deleting doesn't work. 1720# 1721# If you want to keep an older version, rename it before running "make 1722# install". 1723# 1724install: $(GUI_INSTALL) 1725 1726install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1727 1728installvim: installvimbin installruntime installlinks installmanlinks installmacros installtutor installspell 1729 1730installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1731 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1732 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1733 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1734 fi 1735 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1736 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1737 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1738# may create a link to the new executable from /usr/bin/vi 1739 -$(LINKIT) 1740 1741# Long list of arguments for the shell script that installs the manual pages 1742# for one language. 1743INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1744 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1745 1746# install the help files; first adjust the contents for the final location 1747installruntime: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1748 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1749 $(DEST_FTP) $(DEST_AUTO) $(DEST_PLUG) $(DEST_TUTOR) \ 1750 $(DEST_SPELL) $(DEST_COMP) 1751 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1752 @echo generating help tags 1753# Generate the help tags with ":helptags" to handle all languages. 1754 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1755 cd $(HELPSOURCE); \ 1756 files=`ls *.txt tags`; \ 1757 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1758 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1759 cd $(DEST_HELP); \ 1760 chmod $(HELPMOD) $$files 1761 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1762 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1763# install the menu files 1764 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1765 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1766 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1767 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1768 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1769 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1770# install the evim file 1771 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1772 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1773 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1774 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1775# install the bugreport file 1776 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1777 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1778# install the example vimrc files 1779 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1780 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1781 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1782 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1783# install the file type detection files 1784 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1785 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1786 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1787 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1788 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1789 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1790 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1791 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1792 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1793 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1794 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1795 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1796 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1797 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1798 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1799 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1800# install the print resource files 1801 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1802 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1803# install the colorscheme files 1804 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1805 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1806# install the syntax files 1807 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1808 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1809# install the indent files 1810 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1811 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1812# install the standard autoload files 1813 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 1814 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 1815# install the standard plugin files 1816 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1817 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1818# install the ftplugin files 1819 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP) 1820 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1821# install the compiler files 1822 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1823 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1824 1825installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1826 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1827 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1828 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1829 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1830# When using CVS some CVS directories might have been copied. 1831 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \ 1832 if test -n "$$cvs"; then \ 1833 rm -rf $$cvs; \ 1834 fi 1835 1836# install the tutor files 1837installtutor: $(DEST_VIM) $(DEST_RT) $(DEST_TUTOR) 1838 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1839 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1840 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1841 chmod $(HELPMOD) $(DEST_TUTOR)/* 1842 1843# Install the spell files, if they exist. 1844installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 1845 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 1846 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(DEST_SPELL); \ 1847 chmod $(HELPMOD) $(DEST_SPELL)/*.spl; \ 1848 fi 1849 if test -f $(SPELLSOURCE)/en.utf-8.spl; then \ 1850 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(DEST_SPELL); \ 1851 chmod $(HELPMOD) $(DEST_SPELL)/*.spl; \ 1852 fi 1853 1854# install helper program xxd 1855installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1856 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 1857 $(INSTALL_TOOL_LANGS) 1858 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1859 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1860 rm -f $(DEST_BIN)/xxd.rm; \ 1861 fi 1862 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1863 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1864 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1865 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 1866 1867# install the runtime tools 1868 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1869# When using CVS some CVS directories might have been copied. 1870 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1871 if test -n "$$cvs"; then \ 1872 rm -rf $$cvs; \ 1873 fi 1874 -chmod $(FILEMOD) $(DEST_TOOLS)/* 1875# replace the path in some tools 1876 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 1877 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1878 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1879 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 1880 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 1881 1882# install the language specific files for tools, if they were unpacked 1883install-tool-languages: 1884 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1885 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 1886 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 1887 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 1888 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 1889 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 1890 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 1891 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 1892 1893# install the language specific files, if they were unpacked 1894install-languages: languages $(DEST_LANG) $(DEST_KMAP) 1895 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1896 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 1897 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 1898 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 1899 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 1900 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 1901 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 1902 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 1903 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1904 $(DEST_MAN_FR) $(INSTALLMLARGS) 1905 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1906 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 1907 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1908 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 1909 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1910 $(DEST_MAN_IT) $(INSTALLMLARGS) 1911 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1912 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 1913 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1914 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 1915 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1916 $(DEST_MAN_RU) $(INSTALLMLARGS) 1917 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1918 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 1919 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1920 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 1921 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 1922 fi 1923 if test -d $(LANGSOURCE); then \ 1924 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 1925 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 1926 fi 1927 if test -d $(KMAPSOURCE); then \ 1928 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 1929 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 1930 fi 1931 1932# Install the icons for the KDE GUI. This differs from the KDE icons for 1933# other GUIs. 1934installkdeicons: 1935 mkdir -p $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ 1936 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/ 1937 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/ 1938 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/ 1939 mkdir -p $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/ 1940 mkdir -p $(DESTDIR)$(KDE_DIR)/share/apps/kvim 1941 1942 cp ../runtime/KVim.desktop $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/ && chmod 644 $(DESTDIR)$(KDE_DIR)/share/applnk/Editors/KVim.desktop 1943 cp ../runtime/kvim32x32.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/32x32/apps/kvim.png 1944 cp ../runtime/kvim48x48.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png && chmod 644 $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/48x48/apps/kvim.png 1945 cp ../runtime/hi16-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/16x16/actions/hi16-action-make.png 1946 cp ../runtime/hi22-action-make.png $(DESTDIR)$(KDE_DIR)/share/icons/hicolor/22x22/actions/hi22-action-make.png 1947 cp ../runtime/kde-tips $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips && chmod 644 $(DESTDIR)$(KDE_DIR)/share/apps/kvim/tips 1948 1949# install the icons for KDE, if the directory exists and the icon doesn't. 1950ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 1951ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 1952ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 1953KDEPATH = $(HOME)/.kde/share/icons 1954install-icons: 1955 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 1956 -a ! -f $(ICON48PATH)/gvim.png; then \ 1957 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 1958 fi 1959 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 1960 -a ! -f $(ICON32PATH)/gvim.png; then \ 1961 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 1962 fi 1963 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 1964 -a ! -f $(ICON16PATH)/gvim.png; then \ 1965 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 1966 fi 1967 1968 1969$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 1970 @echo Runtime files not found. 1971 @echo You need to unpack the runtime archive before running "make install". 1972 test -f error 1973 1974$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1975 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 1976 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 1977 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 1978 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 1979 $(DEST_AUTO) $(DEST_PLUG): 1980 -$(SHELL) ./mkinstalldirs $@ 1981 -chmod $(DIRMOD) $@ 1982 1983# create links from various names to vim. This is only done when the links 1984# (or executables with the same name) don't exist yet. 1985installlinks: $(GUI_TARGETS) \ 1986 $(DEST_BIN)/$(EXTARGET) \ 1987 $(DEST_BIN)/$(VIEWTARGET) \ 1988 $(DEST_BIN)/$(RVIMTARGET) \ 1989 $(DEST_BIN)/$(RVIEWTARGET) \ 1990 $(INSTALLVIMDIFF) 1991 1992installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 1993 $(DEST_BIN)/$(GVIEWTARGET) \ 1994 $(DEST_BIN)/$(RGVIMTARGET) \ 1995 $(DEST_BIN)/$(RGVIEWTARGET) \ 1996 $(DEST_BIN)/$(EVIMTARGET) \ 1997 $(DEST_BIN)/$(EVIEWTARGET) \ 1998 $(INSTALLGVIMDIFF) 1999 2000installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2001installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2002 2003$(DEST_BIN)/$(EXTARGET): 2004 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2005 2006$(DEST_BIN)/$(VIEWTARGET): 2007 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2008 2009$(DEST_BIN)/$(GVIMTARGET): 2010 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2011 2012$(DEST_BIN)/$(GVIEWTARGET): 2013 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2014 2015$(DEST_BIN)/$(RVIMTARGET): 2016 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2017 2018$(DEST_BIN)/$(RVIEWTARGET): 2019 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2020 2021$(DEST_BIN)/$(RGVIMTARGET): 2022 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2023 2024$(DEST_BIN)/$(RGVIEWTARGET): 2025 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2026 2027$(DEST_BIN)/$(VIMDIFFTARGET): 2028 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2029 2030$(DEST_BIN)/$(GVIMDIFFTARGET): 2031 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2032 2033$(DEST_BIN)/$(EVIMTARGET): 2034 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2035 2036$(DEST_BIN)/$(EVIEWTARGET): 2037 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2038 2039# create links for the manual pages with various names to vim. This is only 2040# done when the links (or manpages with the same name) don't exist yet. 2041 2042INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2043 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2044 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2045 $(GVIMDIFFNAME) $(EVIEWNAME) 2046 2047installmanlinks: 2048 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2049 $(DEST_MAN) $(INSTALLMLARGS) 2050 2051uninstall: uninstall_runtime 2052 -rm -f $(DEST_BIN)/$(VIMTARGET) 2053 -rm -f $(DEST_BIN)/vimtutor 2054 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2055 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2056 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2057 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2058 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2059 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2060 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2061 2062# Note: the "rmdir" will fail if any files were added after "make install" 2063uninstall_runtime: 2064 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2065 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2066 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2067 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2068 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2069 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2070 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2071 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2072 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2073 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2074 $(DEST_MAN) $(INSTALLMLARGS) 2075 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2076 $(DEST_MAN_FR) $(INSTALLMLARGS) 2077 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2078 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2079 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2080 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2081 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2082 $(DEST_MAN_IT) $(INSTALLMLARGS) 2083 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2084 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2085 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2086 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2087 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2088 $(DEST_MAN_RU) $(INSTALLMLARGS) 2089 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2090 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2091 -rm -f $(DEST_MAN)/xxd.1 2092 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2093 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2094 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2095 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2096 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2097 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2098 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2099 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2100 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2101 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2102 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2103 -rm -f $(SYS_OPTWIN_FILE) 2104 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2105 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2106 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2107 -rm -rf $(DEST_MACRO) 2108 -rm -rf $(DEST_TUTOR) 2109 -rm -rf $(DEST_SPELL) 2110 -rm -rf $(DEST_TOOLS) 2111 -rm -rf $(DEST_LANG) 2112 -rm -rf $(DEST_KMAP) 2113 -rm -rf $(DEST_COMP) 2114 -rm -f $(DEST_PRINT)/*.ps 2115 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2116 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2117 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2118 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2119 -rmdir $(DEST_FTP) $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2120# This will fail when other Vim versions are installed, no worries. 2121 -rmdir $(DEST_VIM) 2122 2123# Clean up all the files that have been produced, except configure's. 2124# We support common typing mistakes for Juergen! :-) 2125clean celan: testclean 2126 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) xxd/*.o 2127 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2128 -rm -f conftest* *~ auto/link.sed 2129 -rm -rf $(APPDIR) 2130 -rm -f gui_kde_wid_moc.cc kvim_iface_skel.cc *.kidl 2131 if test -d $(PODIR); then \ 2132 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2133 fi 2134 2135# Make a shadow directory for compilation on another system or with different 2136# features. 2137SHADOWDIR = shadow 2138 2139shadow: runtime pixmaps 2140 mkdir $(SHADOWDIR) 2141 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../vimtutor ../mkinstalldirs . 2142 mkdir $(SHADOWDIR)/auto 2143 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2144 cd $(SHADOWDIR); rm -f auto/link.sed 2145 cp Makefile configure $(SHADOWDIR) 2146 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2147 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2148 cp config.mk.dist $(SHADOWDIR) 2149 mkdir $(SHADOWDIR)/xxd 2150 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2151 mkdir $(SHADOWDIR)/testdir 2152 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2153 ../../testdir/vimrc.unix \ 2154 ../../testdir/*.in \ 2155 ../../testdir/unix.vim \ 2156 ../../testdir/*.ok . 2157 2158# Link needed for doing "make install" in a shadow directory. 2159runtime: 2160 -ln -s ../runtime . 2161 2162# Link needed for doing "make" using GTK in a shadow directory. 2163pixmaps: 2164 -ln -s ../pixmaps . 2165 2166# Update the synmenu.vim file with the latest Syntax menu. 2167# This is only needed when runtime/makemenu.vim was changed. 2168menu: ./vim ../runtime/makemenu.vim 2169 ./vim -u ../runtime/makemenu.vim 2170 2171# Start configure from scratch 2172scrub scratch: 2173 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2174 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2175 touch auto/config.h 2176 cp config.mk.dist auto/config.mk 2177 2178distclean: clean scratch 2179 -rm -f tags 2180 2181dist: distclean 2182 @echo 2183 @echo Making the distribution has to be done in the top directory 2184 2185mdepend: 2186 -@rm -f Makefile~ 2187 cp Makefile Makefile~ 2188 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2189 @for i in $(ALL_SRC) ; do \ 2190 echo "$$i" ; \ 2191 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2192 $(CPP) $$i |\ 2193 grep '^# .*"\./.*\.h"' |\ 2194 sort -t'"' -u +1 -2 |\ 2195 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2196 ` >> tmp_make ; \ 2197 done 2198 mv tmp_make Makefile 2199 2200depend: 2201 -@rm -f Makefile~ 2202 cp Makefile Makefile~ 2203 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2204 -for i in $(ALL_SRC); do echo $$i; \ 2205 $(CPP_DEPEND) $$i | \ 2206 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2207 mv tmp_make Makefile 2208 2209# Run lint. Clean up the *.ln files that are sometimes left behind. 2210lint: 2211 lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2212 -rm -f *.ln 2213 2214# Check dosinst.c with lint. 2215lintinstall: 2216 lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2217 -rm -f dosinst.ln 2218 2219########################################################################### 2220 2221.c.o: 2222 $(CCC) $< 2223 2224.cc.o: 2225 $(CCC) $< 2226 2227auto/if_perl.c: if_perl.xs 2228 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2229 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2230 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2231 2232auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2233 CC="$(CC) $(ALL_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2234 2235QUOTESED = sed -e 's/"/\\"/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2236auto/pathdef.c: Makefile auto/config.mk 2237 -@echo creating $@ 2238 -@echo '/* pathdef.c */' > $@ 2239 -@echo '/* This file is automatically created by Makefile' >> $@ 2240 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2241 -@echo '#include "vim.h"' >> $@ 2242 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2243 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2244 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2245 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2246 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2247 -@if test -n "$(COMPILEDBY)"; then \ 2248 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2249 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2250 -@echo '";' >> $@ 2251 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2252 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2253 -@echo '";' >> $@ 2254 -@sh $(srcdir)/pathdef.sh 2255 2256# All the object files are put in the "objects" directory. Since not all make 2257# commands understand putting object files in another directory, it must be 2258# specified for each file separately. 2259 2260objects: 2261 mkdir objects 2262 2263objects/buffer.o: buffer.c 2264 $(CCC) -o $@ buffer.c 2265 2266objects/charset.o: charset.c 2267 $(CCC) -o $@ charset.c 2268 2269objects/diff.o: diff.c 2270 $(CCC) -o $@ diff.c 2271 2272objects/digraph.o: digraph.c 2273 $(CCC) -o $@ digraph.c 2274 2275objects/edit.o: edit.c 2276 $(CCC) -o $@ edit.c 2277 2278objects/eval.o: eval.c 2279 $(CCC) -o $@ eval.c 2280 2281objects/ex_cmds.o: ex_cmds.c 2282 $(CCC) -o $@ ex_cmds.c 2283 2284objects/ex_cmds2.o: ex_cmds2.c 2285 $(CCC) -o $@ ex_cmds2.c 2286 2287objects/ex_docmd.o: ex_docmd.c 2288 $(CCC) -o $@ ex_docmd.c 2289 2290objects/ex_eval.o: ex_eval.c 2291 $(CCC) -o $@ ex_eval.c 2292 2293objects/ex_getln.o: ex_getln.c 2294 $(CCC) -o $@ ex_getln.c 2295 2296objects/fileio.o: fileio.c 2297 $(CCC) -o $@ fileio.c 2298 2299objects/fold.o: fold.c 2300 $(CCC) -o $@ fold.c 2301 2302objects/getchar.o: getchar.c 2303 $(CCC) -o $@ getchar.c 2304 2305objects/hardcopy.o: hardcopy.c 2306 $(CCC) -o $@ hardcopy.c 2307 2308objects/hashtable.o: hashtable.c 2309 $(CCC) -o $@ hashtable.c 2310 2311objects/gui.o: gui.c 2312 $(CCC) -o $@ gui.c 2313 2314objects/gui_at_fs.o: gui_at_fs.c 2315 $(CCC) -o $@ gui_at_fs.c 2316 2317objects/gui_at_sb.o: gui_at_sb.c 2318 $(CCC) -o $@ gui_at_sb.c 2319 2320objects/gui_athena.o: gui_athena.c 2321 $(CCC) -o $@ gui_athena.c 2322 2323objects/gui_beval.o: gui_beval.c 2324 $(CCC) -o $@ gui_beval.c 2325 2326objects/gui_gtk.o: gui_gtk.c 2327 $(CCC) -o $@ gui_gtk.c 2328 2329objects/gui_gtk_f.o: gui_gtk_f.c 2330 $(CCC) -o $@ gui_gtk_f.c 2331 2332objects/gui_gtk_x11.o: gui_gtk_x11.c 2333 $(CCC) -o $@ gui_gtk_x11.c 2334 2335objects/gui_motif.o: gui_motif.c 2336 $(CCC) -o $@ gui_motif.c 2337 2338objects/gui_xmdlg.o: gui_xmdlg.c 2339 $(CCC) -o $@ gui_xmdlg.c 2340 2341objects/gui_xmebw.o: gui_xmebw.c 2342 $(CCC) -o $@ gui_xmebw.c 2343 2344objects/gui_x11.o: gui_x11.c 2345 $(CCC) -o $@ gui_x11.c 2346 2347objects/gui_photon.o: gui_photon.c 2348 $(CCC) -o $@ gui_photon.c 2349 2350objects/gui_mac.o: gui_mac.c 2351 $(CCC) -o $@ gui_mac.c 2352 2353objects/hangulin.o: hangulin.c 2354 $(CCC) -o $@ hangulin.c 2355 2356objects/if_cscope.o: if_cscope.c 2357 $(CCC) -o $@ if_cscope.c 2358 2359objects/if_xcmdsrv.o: if_xcmdsrv.c 2360 $(CCC) -o $@ if_xcmdsrv.c 2361 2362objects/if_mzsch.o: if_mzsch.c 2363 $(CCC) -o $@ if_mzsch.c 2364 2365objects/if_perl.o: auto/if_perl.c 2366 $(CCC) -o $@ auto/if_perl.c 2367 2368objects/if_perlsfio.o: if_perlsfio.c 2369 $(CCC) -o $@ if_perlsfio.c 2370 2371objects/if_python.o: if_python.c 2372 $(CCC) -o $@ if_python.c 2373 2374objects/if_ruby.o: if_ruby.c 2375 $(CCC) -o $@ if_ruby.c 2376 2377objects/if_sniff.o: if_sniff.c 2378 $(CCC) -o $@ if_sniff.c 2379 2380objects/if_tcl.o: if_tcl.c 2381 $(CCC) -o $@ if_tcl.c 2382 2383objects/integration.o: integration.c 2384 $(CCC) -o $@ integration.c 2385 2386objects/main.o: main.c 2387 $(CCC) -o $@ main.c 2388 2389objects/mark.o: mark.c 2390 $(CCC) -o $@ mark.c 2391 2392objects/memfile.o: memfile.c 2393 $(CCC) -o $@ memfile.c 2394 2395objects/memline.o: memline.c 2396 $(CCC) -o $@ memline.c 2397 2398objects/menu.o: menu.c 2399 $(CCC) -o $@ menu.c 2400 2401objects/message.o: message.c 2402 $(CCC) -o $@ message.c 2403 2404objects/misc1.o: misc1.c 2405 $(CCC) -o $@ misc1.c 2406 2407objects/misc2.o: misc2.c 2408 $(CCC) -o $@ misc2.c 2409 2410objects/move.o: move.c 2411 $(CCC) -o $@ move.c 2412 2413objects/mbyte.o: mbyte.c 2414 $(CCC) -o $@ mbyte.c 2415 2416objects/normal.o: normal.c 2417 $(CCC) -o $@ normal.c 2418 2419objects/ops.o: ops.c 2420 $(CCC) -o $@ ops.c 2421 2422objects/option.o: option.c 2423 $(CCC) -o $@ option.c 2424 2425objects/os_beos.o: os_beos.c 2426 $(CCC) -o $@ os_beos.c 2427 2428objects/os_qnx.o: os_qnx.c 2429 $(CCC) -o $@ os_qnx.c 2430 2431objects/os_macosx.o: os_macosx.c 2432 $(CCC) -o $@ os_macosx.c 2433 2434objects/os_mac_conv.o: os_mac_conv.c 2435 $(CCC) -o $@ os_mac_conv.c 2436 2437objects/os_unix.o: os_unix.c 2438 $(CCC) -o $@ os_unix.c 2439 2440objects/pathdef.o: auto/pathdef.c 2441 $(CCC) -o $@ auto/pathdef.c 2442 2443objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2444 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \ 2445 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2446 2447objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2448 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2449 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2450 $(PYTHON_GETPATH_CFLAGS) 2451 2452objects/pty.o: pty.c 2453 $(CCC) -o $@ pty.c 2454 2455objects/quickfix.o: quickfix.c 2456 $(CCC) -o $@ quickfix.c 2457 2458objects/regexp.o: regexp.c 2459 $(CCC) -o $@ regexp.c 2460 2461objects/screen.o: screen.c 2462 $(CCC) -o $@ screen.c 2463 2464objects/search.o: search.c 2465 $(CCC) -o $@ search.c 2466 2467objects/spell.o: spell.c 2468 $(CCC) -o $@ spell.c 2469 2470objects/syntax.o: syntax.c 2471 $(CCC) -o $@ syntax.c 2472 2473objects/tag.o: tag.c 2474 $(CCC) -o $@ tag.c 2475 2476objects/term.o: term.c 2477 $(CCC) -o $@ term.c 2478 2479objects/ui.o: ui.c 2480 $(CCC) -o $@ ui.c 2481 2482objects/undo.o: undo.c 2483 $(CCC) -o $@ undo.c 2484 2485objects/window.o: window.c 2486 $(CCC) -o $@ window.c 2487 2488objects/workshop.o: workshop.c 2489 $(CCC) -o $@ workshop.c 2490 2491objects/wsdebug.o: wsdebug.c 2492 $(CCC) -o $@ wsdebug.c 2493 2494objects/gui_kde.o: gui_kde.cc 2495 $(CCC) -o $@ gui_kde.cc 2496 2497objects/gui_kde_x11.o: gui_kde_x11.cc 2498 $(CCC) -o $@ gui_kde_x11.cc 2499 2500objects/gui_kde_wid.o: gui_kde_wid.cc 2501 $(MOC) -o gui_kde_wid_moc.cc gui_kde_wid.h 2502 $(KDE_DIR)/bin/dcopidl kvim_iface.h > kvim_iface.kidl || ( rm -f kvim_iface.kidl ; /bin/false ) 2503 $(KDE_DIR)/bin/dcopidl2cpp --c++-suffix cc --no-stub kvim_iface.kidl 2504 $(CCC) -o $@ gui_kde_wid.cc 2505 2506gui_kde_wid_moc.cc: objects/gui_kde_wid.o 2507objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc 2508 $(CCC) -o $@ gui_kde_wid_moc.cc 2509 2510kvim_iface_skel.cc: objects/gui_kde_wid.o 2511objects/kvim_iface_skel.o: kvim_iface_skel.cc 2512 $(CCC) -o $@ kvim_iface_skel.cc 2513 2514objects/netbeans.o: netbeans.c 2515 $(CCC) -o $@ netbeans.c 2516 2517Makefile: 2518 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2519 2520############################################################################### 2521### MacOS X installation 2522### 2523### This installs a runnable Vim.app in $(prefix) 2524 2525REZ = /Developer/Tools/Rez 2526RESDIR = $(APPDIR)/Contents/Resources 2527VERSION = $(VIMMAJOR).$(VIMMINOR) 2528 2529### Common flags 2530M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2531 -DAPP_VER=$(VERSION) -DICON_APP=$(ICON_APP) 2532 2533### Icons 2534ICON_APP = gui_mac.icns 2535ICONS = $(RESDIR)/$(ICON_APP) 2536 2537# If you uncomment the following lines the *.icns in the src directory will be 2538# detected by this Makefile automatically, and used for Vim. 2539#ICON_APP = $(shell if [ -e app.icns ] ; then echo app.icns ; else echo gui_mac.icns ; fi) 2540#ICON_DOC = $(shell if [ -e doc.icns ] ; then echo doc.icns ; else echo ; fi) 2541#ICON_DOCTXT = $(shell if [ -e doc-txt.icns ] ; then echo doc-txt.icns ; else echo ; fi) 2542#ICONS = $(addprefix $(RESDIR)/, $(ICON_APP) $(ICON_DOC) $(ICON_DOCTXT)) 2543 2544install_macosx: gui_bundle 2545 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2546 2547gui_bundle: $(APPDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2548 bundle-language 2549 2550$(APPDIR): 2551 mkdir -p $@ 2552 2553bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2554 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2555 cp -R ../runtime $(APPDIR) 2556# When using CVS some CVS directories might have been copied. 2557 cvs=`find $(APPDIR) \( -name CVS -o -name AAPDIR \) -print`; \ 2558 if test -n "$$cvs"; then \ 2559 rm -rf $$cvs; \ 2560 fi 2561 2562bundle-executable: $(VIMTARGET) 2563 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2564 2565bundle-info: bundle-dir 2566 @echo "Creating PkgInfo" 2567 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2568 @echo "Creating Info.plist" 2569 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2570 2571bundle-resource: bundle-dir bundle-icons bundle-rsrc 2572 2573bundle-icons: $(ICONS) 2574 2575### Classic resources 2576# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2577# This file is also required for OS X Vim. 2578bundle-rsrc: os_mac.rsr.hqx 2579 @echo "Creating resource fork" 2580 python dehqx.py $< 2581 rm -f gui_mac.rsrc 2582 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2583 2584# po/Make_osx.pl says something about generating a Mac message file 2585# for Ukrananian. Would somebody using Mac OS X in Ukranian 2586# *really* be upset that Carbon Vim was not localised in 2587# Ukranian? 2588# 2589#bundle-language: bundle-dir po/Make_osx.pl 2590# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2591bundle-language: bundle-dir 2592 2593$(APPDIR)/Contents: 2594 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2595 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2596 2597$(RESDIR)/%.icns: %.icns 2598 cp $< $@ 2599 2600 2601############################################################################### 2602### (automatically generated by 'make depend') 2603### Dependencies: 2604objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h \ 2605 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2606 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2607 globals.h farsi.h arabic.h version.h 2608objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h \ 2609 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2610 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2611 globals.h farsi.h arabic.h 2612objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2613 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2614 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2615 arabic.h 2616objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h \ 2617 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2618 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2619 globals.h farsi.h arabic.h 2620objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2621 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2622 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2623 arabic.h 2624objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2625 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2626 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2627 arabic.h version.h 2628objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h \ 2629 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2630 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2631 globals.h farsi.h arabic.h version.h 2632objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2633 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2634 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2635 globals.h farsi.h arabic.h version.h 2636objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2637 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2638 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2639 globals.h farsi.h arabic.h 2640objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h \ 2641 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2642 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2643 globals.h farsi.h arabic.h 2644objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2645 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2646 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2647 globals.h farsi.h arabic.h 2648objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h \ 2649 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2650 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2651 globals.h farsi.h arabic.h 2652objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2653 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2654 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2655 arabic.h 2656objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h \ 2657 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2658 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2659 globals.h farsi.h arabic.h 2660objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2661 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2662 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2663 globals.h farsi.h arabic.h 2664objects/hashtable.o: hashtable.c vim.h auto/config.h feature.h os_unix.h \ 2665 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2666 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2667 globals.h farsi.h arabic.h 2668objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2669 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2670 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2671 globals.h farsi.h arabic.h if_cscope.h 2672objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2673 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2674 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2675 globals.h farsi.h arabic.h version.h 2676objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2677 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2678 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2679 arabic.h farsi.c arabic.c 2680objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2681 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2682 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2683 arabic.h 2684objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h \ 2685 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2686 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2687 globals.h farsi.h arabic.h 2688objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h \ 2689 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2690 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2691 globals.h farsi.h arabic.h 2692objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2693 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2694 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2695 arabic.h 2696objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h \ 2697 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2698 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2699 globals.h farsi.h arabic.h 2700objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2701 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2702 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2703 arabic.h version.h 2704objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2705 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2706 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2707 arabic.h 2708objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2709 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2710 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2711 arabic.h 2712objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2713 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2714 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2715 arabic.h 2716objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h \ 2717 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2718 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2719 globals.h farsi.h arabic.h 2720objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2721 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2722 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2723 arabic.h 2724objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h \ 2725 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2726 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2727 globals.h farsi.h arabic.h 2728objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h \ 2729 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2730 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2731 globals.h farsi.h arabic.h os_unixx.h 2732objects/pathdef.o: auto/pathdef.c vim.h auto/config.h feature.h os_unix.h \ 2733 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2734 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2735 globals.h farsi.h arabic.h 2736objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2737 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2738 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2739 globals.h farsi.h arabic.h 2740objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h \ 2741 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2742 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2743 globals.h farsi.h arabic.h 2744objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h \ 2745 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2746 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2747 globals.h farsi.h arabic.h 2748objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h \ 2749 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2750 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2751 globals.h farsi.h arabic.h 2752objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h \ 2753 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2754 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2755 globals.h farsi.h arabic.h 2756objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h \ 2757 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2758 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2759 globals.h farsi.h arabic.h 2760objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2761 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2762 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2763 arabic.h 2764objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2765 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2766 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2767 arabic.h 2768objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2769 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2770 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2771 arabic.h 2772objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2773 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2774 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2775 arabic.h 2776objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h \ 2777 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2778 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2779 globals.h farsi.h arabic.h version.h 2780objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h \ 2781 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2782 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2783 globals.h farsi.h arabic.h 2784objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2785 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2786 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2787 arabic.h 2788objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h \ 2789 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \ 2790 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \ 2791 proto.h globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 2792objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2793 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2794 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2795 globals.h farsi.h arabic.h gui_gtk_f.h 2796objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2797 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2798 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2799 globals.h farsi.h arabic.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \ 2800 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm 2801objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2802 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2803 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2804 globals.h farsi.h arabic.h gui_at_sb.h 2805objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2806 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2807 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2808 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2809 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2810objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h \ 2811 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2812 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2813 globals.h farsi.h arabic.h ../runtime/vim32x32.xpm \ 2814 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm ../pixmaps/tb_new.xpm \ 2815 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2816 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2817 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2818 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2819 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2820 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2821 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2822 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2823 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2824 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2825 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2826 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2827 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2828 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2829 ../pixmaps/tb_minwidth.xpm 2830objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 2831 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2832 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2833 globals.h farsi.h arabic.h gui_at_sb.h 2834objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 2835 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2836 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2837 globals.h farsi.h arabic.h gui_at_sb.h 2838objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2839 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h gui_beval.h \ 2840 proto/gui_beval.pro option.h ex_cmds.h proto.h globals.h farsi.h \ 2841 arabic.h 2842objects/gui_kde.o: gui_kde.cc gui_kde_wid.h kvim_iface.h vim.h \ 2843 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \ 2844 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \ 2845 globals.h farsi.h 2846objects/gui_kde_wid.o: gui_kde_wid.cc gui_kde_wid.h kvim_iface.h \ 2847 vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \ 2848 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \ 2849 globals.h farsi.h proto/../../pixmaps/alert.xpm proto/../../pixmaps/error.xpm \ 2850 proto/../../pixmaps/generic.xpm proto/../../pixmaps/info.xpm \ 2851 proto/../../pixmaps/quest.xpm 2852objects/gui_kde_x11.o: gui_kde_x11.cc gui_kde_wid.h kvim_iface.h vim.h \ 2853 auto/config.h feature.h os_unix.h auto/osdef.h ascii.h keymap.h \ 2854 term.h macros.h structs.h regexp.h gui.h option.h ex_cmds.h proto.h \ 2855 globals.h farsi.h version.h ../runtime/vim32x32.xpm 2856objects/gui_kde_wid_moc.o: gui_kde_wid_moc.cc gui_kde_wid.h \ 2857 kvim_iface.h vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2858 ascii.h keymap.h term.h macros.h structs.h regexp.h gui.h option.h \ 2859 ex_cmds.h proto.h globals.h 2860objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 2861 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2862 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2863 globals.h farsi.h arabic.h 2864objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 2865 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2866 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2867 globals.h farsi.h arabic.h 2868objects/if_perl.o: auto/if_perl.c vim.h auto/config.h feature.h os_unix.h \ 2869 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2870 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2871 globals.h farsi.h arabic.h 2872objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 2873 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2874 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2875 globals.h farsi.h arabic.h 2876objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 2877 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2878 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2879 globals.h farsi.h arabic.h 2880objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h \ 2881 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2882 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2883 globals.h farsi.h arabic.h 2884objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h \ 2885 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2886 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2887 globals.h farsi.h arabic.h version.h 2888objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 2889 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2890 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2891 globals.h farsi.h arabic.h os_unixx.h 2892objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 2893 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2894 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2895 globals.h farsi.h arabic.h 2896objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 2897 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h structs.h \ 2898 regexp.h gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h \ 2899 proto.h globals.h farsi.h arabic.h version.h workshop.h 2900objects/wsdebug.o: wsdebug.c 2901objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 2902 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2903 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2904 globals.h farsi.h arabic.h integration.h 2905objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 2906 auto/osdef.h ascii.h keymap.h term.h macros.h structs.h regexp.h \ 2907 gui.h gui_beval.h proto/gui_beval.pro option.h ex_cmds.h proto.h \ 2908 globals.h farsi.h arabic.h version.h 2909
