1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# be used. 33# - Uncomment the line "CONF_OPT_XSMP = --disable-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-luainterp for Lua interpreter 42# --enable-mzschemeinterp for MzScheme interpreter 43# --enable-perlinterp for Perl interpreter 44# --enable-python3interp for Python3 interpreter 45# --enable-pythoninterp for Python interpreter 46# --enable-rubyinterp for Ruby interpreter 47# --enable-tclinterp for Tcl interpreter 48# --enable-cscope for Cscope interface 49# - Uncomment one of the lines with --with-features= to enable a set of 50# features (but not the interfaces just mentioned). 51# - Uncomment the line with --disable-acl to disable ACL support even 52# though your system supports it. 53# - Uncomment the line with --disable-gpm to disable gpm support 54# even though you have gpm libraries and includes. 55# - Uncomment the line with --disable-sysmouse to disable sysmouse 56# support even though you have /dev/sysmouse and includes. 57# - Uncomment one of the lines with CFLAGS and/or CC if you have 58# something very special or want to tune the optimizer. 59# - Search for the name of your system to see if it needs anything 60# special. 61# - A few versions of make use '.include "file"' instead of 'include 62# file'. Adjust the include line below if yours does. 63# 64# 2. Edit feature.h {{{1 65# Only if you do not agree with the default compile features, e.g.: 66# - you want Vim to be as vi compatible as it can be 67# - you want to use Emacs tags files 68# - you want right-to-left editing (Hebrew) 69# - you want 'langmap' support (Greek) 70# - you want to remove features to make Vim smaller 71# 72# 3. "make" {{{1 73# Will first run ./configure with the options in this file. Then it will 74# start make again on this Makefile to do the compiling. You can also do 75# this in two steps with: 76# make config 77# make 78# The configuration phase creates/overwrites auto/config.h and 79# auto/config.mk. 80# The configure script is created with "make autoconf". It can detect 81# different features of your system and act accordingly. However, it is 82# not correct for all systems. Check this: 83# - If you have X windows, but configure could not find it or reported 84# another include/library directory then you wanted to use, you have 85# to set CONF_OPT_X below. You might also check the installation of 86# xmkmf. 87# - If you have --enable-gui=motif and have Motif on your system, but 88# configure reports "checking for location of gui... <not found>", you 89# have to set GUI_INC_LOC and GUI_LIB_LOC below. 90# If you changed something, do this to run configure again: 91# make reconfig 92# 93# - If you do not trust the automatic configuration code, then inspect 94# auto/config.h and auto/config.mk, before starting the actual build 95# phase. If possible edit this Makefile, rather than auto/config.mk -- 96# especially look at the definition of VIMLOC below. Note that the 97# configure phase overwrites auto/config.mk and auto/config.h again. 98# - If you get error messages, find out what is wrong and try to correct 99# it in this Makefile. You may need to do "make reconfig" when you 100# change anything that configure uses (e.g. switching from an old C 101# compiler to an ANSI C compiler). Only when auto/configure does 102# something wrong you may need to change one of the other files. If 103# you find a clean way to fix the problem, consider sending a note to 104# the author of autoconf ([email protected]) or Vim 105# ([email protected]). Don't bother to do that when you made a hack 106# solution for a non-standard system. 107# 108# 4. "make test" {{{1 109# This is optional. This will run Vim scripts on a number of test 110# files, and compare the produced output with the expected output. 111# If all is well, you will get the "ALL DONE" message in the end. If a 112# test fails you get "TEST FAILURE". See below (search for "/^test"). 113# 114# 5. "make install" {{{1 115# If the new Vim seems to be working OK you can install it and the 116# documentation in the appropriate location. The default is 117# "/usr/local". Change "prefix" below to change the location. 118# "auto/pathdef.c" will be compiled again after changing this to make 119# the executable know where the help files are located. 120# Note that any existing executable is removed or overwritten. If you 121# want to keep it you will have to make a backup copy first. 122# The runtime files are in a different directory for each version. You 123# might want to delete an older version. 124# If you don't want to install everything, there are other targets: 125# make installvim only installs Vim, not the tools 126# make installvimbin only installs the Vim executable 127# make installruntime installs most of the runtime files 128# make installrtbase only installs the Vim help and 129# runtime files 130# make installlinks only installs the Vim binary links 131# make installmanlinks only installs the Vim manpage links 132# make installmacros only installs the Vim macros 133# make installpack only installs the packages 134# make installtutorbin only installs the Vim tutor program 135# make installtutor only installs the Vim tutor files 136# make installspell only installs the spell files 137# make installtools only installs xxd 138# If you install Vim, not to install for real but to prepare a package 139# or RPM, set DESTDIR to the root of the tree. 140# 141# 6. Use Vim until a new version comes out. {{{1 142# 143# 7. "make uninstall_runtime" {{{1 144# Will remove the runtime files for the current version. This is safe 145# to use while another version is being used, only version-specific 146# files will be deleted. 147# To remove the runtime files of another version: 148# make uninstall_runtime VIMRTDIR=/vim54 149# If you want to delete all installed files, use: 150# make uninstall 151# Note that this will delete files that have the same name for any 152# version, thus you might need to do a "make install" soon after this. 153# Be careful not to remove a version of Vim that is still being used! 154# To find out which files and directories will be deleted, use: 155# make -n uninstall 156# }}} 157# 158### This Makefile has been successfully tested on many systems. {{{ 159### Only the ones that require special options are mentioned here. 160### Check the (*) column for remarks, listed below. 161### Later code changes may cause small problems, otherwise Vim is supposed to 162### compile and run without problems. 163 164#system: configurations: version (*) tested by: 165#------------- ------------------------ ------- - ---------- 166#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 167#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 168#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 169#AIX 4.2.1 cc 5.2k (C) Will Fiveash 170#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 171#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 172#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 173#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 174#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 175#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 176#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 177#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 178#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 179#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 180#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 181#Irix 6.4 cc ? 5.0m (S) Rick Sayre 182#Irix 6.5 cc ? 6.0 (S) David Harrison 183#Irix 64 bit 4.5 (K) Jon Wright 184#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 185#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 186#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 187#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 188#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 189#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 190#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 191#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 192#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 193#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 194#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 195#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 196#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 197#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 198#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 199#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 200#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 201#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 202#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 203#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 204#Solaris 2.6 gcc 2.8.1 ncurses 5.3 (G) Larry W. Virden 205#Solaris with -lthread 5.5 (W) K. Nagano 206#Solaris gcc (b) Riccardo 207#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 208#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 209#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 210#Tandem/NSK (c) Matthew Woehlke 211#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 212#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 213#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 214# }}} 215 216# (*) Remarks: {{{ 217# 218# (1) Uncomment line below for shlicc2 219# (2) HPUX with compile problems or wrong digraphs, uncomment line below 220# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 221# And add "-lXpm" to MOTIF_LIBS2. 222# (4) For cc the optimizer must be disabled (use CFLAGS= after running 223# configure) (symptom: ":set termcap" output looks weird). 224# (5) Compiler may need extra argument, see below. 225# (6) See below for a few lines to uncomment 226# (7) See below for lines which enable the use of clcc 227# (8) Needs some EXTRA_LIBS, search for Unisys below 228# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 229# (A) May need EXTRA_LIBS, see below 230# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 231# (C) Force the use of curses instead of termcap, see below. 232# (D) Uncomment lines below for QNX 233# (E) You might want to use termlib instead of termcap, see below. 234# (F) See below for instructions. 235# (G) Using ncurses version 4.2 has reported to cause a crash. Use the 236# Sun curses library instead. 237# (H) See line for EXTRA_LIBS below. 238# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 239# (J) If you get undefined symbols, see below for a solution. 240# (K) See lines to uncomment below for machines with 64 bit pointers. 241# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 242# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 243# characters instead of one). 244# (N) SCO with decmouse. 245# (O) LynxOS needs EXTRA_LIBS, see below. 246# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 247# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 248# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 249# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 250# (T) See ../doc/os_beos.txt. 251# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 252# detection, since the configure script runs into an error when it 253# detects Python (probably because of the bash shell). 254# (V) See lines to uncomment below. 255# (X) Need to use the .include "auto/config.mk" line below 256# (Y) See line with c89 below 257# (Z) See lines with cc or c89 below 258# (a) See line with EXTRA_LIBS below. 259# (b) When using gcc with the Solaris linker, make sure you don't use GNU 260# strip, otherwise the binary may not run: "Cannot find ELF". 261# (c) Add -lfloss to EXTRA_LIBS, see below. 262# (x) When you get warnings for precompiled header files, run 263# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 264# }}} 265 266 267#DO NOT CHANGE the next line, we need it for configure to find the compiler 268#instead of using the default from the "make" program. 269#Use a line further down to change the value for CC. 270CC= 271 272# Change and use these defines if configure cannot find your Motif stuff. 273# Unfortunately there is no "standard" location for Motif. {{{ 274# These defines can contain a single directory (recommended) or a list of 275# directories (for when you are working with several systems). The LAST 276# directory that exists is used. 277# When changed, run "make reconfig" next! 278#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 279#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 280### Use these two lines for Infomagic Motif (3) 281#GUI_INC_LOC = -I/usr/X11R6/include 282#GUI_LIB_LOC = -L/usr/X11R6/lib 283# }}} 284 285# Defaults used when auto/config.mk does not exist. 286srcdir = . 287VIMNAME = vim 288EXNAME = ex 289VIEWNAME = view 290 291######################## auto/config.mk ######################## {{{1 292# At this position auto/config.mk is included. When starting from the 293# toplevel Makefile it is almost empty. After running auto/configure it 294# contains settings that have been discovered for your system. Settings below 295# this include override settings in auto/config.mk! 296 297# Note: If make fails because auto/config.mk does not exist (it is not 298# included in the repository), do: 299# cp config.mk.dist auto/config.mk 300 301# (X) How to include auto/config.mk depends on the version of "make" you have, 302# if the current choice doesn't work, try the other one. 303 304include auto/config.mk 305#.include "auto/config.mk" 306CClink = $(CC) 307 308#}}} 309 310# Include the configuration choices first, so we can override everything 311# below. As shipped, this file contains a target that causes to run 312# configure. Once configure was run, this file contains a list of 313# make variables with predefined values instead. Thus any second invocation 314# of make, will build Vim. 315 316# CONFIGURE - configure arguments {{{1 317# You can give a lot of options to configure. 318# Change this to your desire and do 'make config' afterwards 319 320# examples you can uncomment: 321#CONF_ARGS1 = --exec-prefix=/usr 322#CONF_ARGS2 = --with-vim-name=vim8 --with-ex-name=ex8 --with-view-name=view8 323#CONF_ARGS3 = --with-global-runtime=/etc/vim,/usr/share/vim 324#CONF_ARGS4 = --with-local-dir=/usr/share 325#CONF_ARGS5 = --without-local-dir 326 327# Use this one if you distribute a modified version of Vim. 328#CONF_ARGS6 = --with-modified-by="John Doe" 329 330# GUI - For creating Vim with GUI (gvim) (B) 331# Uncomment this line when you don't want to get the GUI version, although you 332# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 333# at all. 334#CONF_OPT_GUI = --disable-gui 335 336# Uncomment one of these lines if you have that GUI but don't want to use it. 337# The automatic check will use another one that can be found. 338# Gnome is disabled by default, because it may cause trouble. 339# 340# When both GTK+ 2 and GTK+ 3 are possible then GTK+ 2 will be selected. 341# To use GTK+ 3 instead use --enable-gui=gtk3 (see below). 342#CONF_OPT_GUI = --disable-gtk2-check 343#CONF_OPT_GUI = --enable-gnome-check 344#CONF_OPT_GUI = --disable-gtk3-check 345#CONF_OPT_GUI = --disable-motif-check 346#CONF_OPT_GUI = --disable-athena-check 347#CONF_OPT_GUI = --disable-nextaw-check 348 349# Uncomment one of these lines to select a specific GUI to use. 350# When using "yes" or nothing, configure will use the first one found: GTK+, 351# Motif or Athena. 352# 353# GTK versions that are known not to work 100% are rejected. 354# Use "--disable-gtktest" to accept them anyway. 355# For GTK 1 use Vim 7.2. 356# 357# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 358# is used then GNOME will automatically be used if it is found. If you have 359# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 360# --enable-gui=gtk or leave out --enable-gnome-check. 361# 362# GNOME makes sense only for GTK+ 2. Avoid use of --enable-gnome-check with 363# GTK+ 3 build, as the functionality of GNOME is already incooperated into 364# GTK+ 3. 365# 366# If the selected GUI isn't found, the GUI is disabled automatically 367#CONF_OPT_GUI = --enable-gui=gtk2 368#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 369#CONF_OPT_GUI = --enable-gui=gnome2 370#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 371#CONF_OPT_GUI = --enable-gui=gtk3 372#CONF_OPT_GUI = --enable-gui=gtk3 --disable-gtktest 373#CONF_OPT_GUI = --enable-gui=motif 374#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 375#CONF_OPT_GUI = --enable-gui=athena 376#CONF_OPT_GUI = --enable-gui=nextaw 377 378# Carbon GUI for Mac OS X 379#CONF_OPT_GUI = --enable-gui=carbon 380 381# Uncomment this line to run an individual test with gvim. 382#GUI_TESTARG = GUI_FLAG=-g 383 384# DARWIN - detecting Mac OS X 385# Uncomment this line when you want to compile a Unix version of Vim on 386# Darwin. None of the Mac specific options or files will be used. 387#CONF_OPT_DARWIN = --disable-darwin 388 389# Select the architecture supported. Default is to build for the current 390# platform. Use "both" for a universal binary. That probably doesn't work 391# when including Perl, Python, etc. 392#CONF_OPT_DARWIN = --with-mac-arch=i386 393#CONF_OPT_DARWIN = --with-mac-arch=ppc 394#CONF_OPT_DARWIN = --with-mac-arch=both 395 396# Uncomment the next line to fail if one of the requested language interfaces 397# cannot be configured. Without this Vim will be build anyway, without 398# the failing interfaces. 399#CONF_OPT_FAIL = --enable-fail-if-missing 400 401# LUA 402# Uncomment one of these when you want to include the Lua interface. 403# First one is for static linking, second one for dynamic loading. 404# Use --with-luajit if you want to use LuaJIT instead of Lua. 405# Set PATH environment variable to find lua or luajit executable. 406# This requires at least "normal" features, "tiny" and "small" don't work. 407#CONF_OPT_LUA = --enable-luainterp 408#CONF_OPT_LUA = --enable-luainterp=dynamic 409#CONF_OPT_LUA = --enable-luainterp --with-luajit 410#CONF_OPT_LUA = --enable-luainterp=dynamic --with-luajit 411# Lua installation dir (when not set uses $LUA_PREFIX or defaults to /usr) 412#CONF_OPT_LUA_PREFIX = --with-lua-prefix=/usr/local 413 414# MZSCHEME 415# Uncomment this when you want to include the MzScheme interface. 416# NOTE: does not work well together with valgrind. 417#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 418# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 419#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 420#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 421#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 422 423# PERL 424# Uncomment one of these when you want to include the Perl interface. 425# First one is for static linking, second one for dynamic loading. 426# The Perl option sometimes causes problems, because it adds extra flags 427# 428# to the command line. If you see strange flags during compilation, check in 429# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 430# the next line. 431# When you get an error for a missing "perl.exp" file, try creating an empty 432# one: "touch perl.exp". 433# This requires at least "normal" features, "tiny" and "small" don't work. 434#CONF_OPT_PERL = --enable-perlinterp 435#CONF_OPT_PERL = --enable-perlinterp=dynamic 436 437# PYTHON 438# Uncomment lines here when you want to include the Python interface. 439# This requires at least "normal" features, "tiny" and "small" don't work. 440# NOTE: This may cause threading to be enabled, which has side effects (such 441# as using different libraries and debugging becomes more difficult). 442# For Python3 support make a symbolic link in /usr/local/bin: 443# ln -s python3 python3.1 444# If both python2.x and python3.x are enabled then the linking will be via 445# dlopen(), dlsym(), dlclose(), i.e. pythonX.Y.so must be available 446# However, this may still cause problems, such as "import termios" failing. 447# Build two separate versions of Vim in that case. 448#CONF_OPT_PYTHON = --enable-pythoninterp 449#CONF_OPT_PYTHON = --enable-pythoninterp --with-python-command=python2.7 450#CONF_OPT_PYTHON = --enable-pythoninterp=dynamic 451#CONF_OPT_PYTHON3 = --enable-python3interp 452#CONF_OPT_PYTHON3 = --enable-python3interp --with-python3-command=python3.6 453#CONF_OPT_PYTHON3 = --enable-python3interp=dynamic 454 455# RUBY 456# Uncomment this when you want to include the Ruby interface. 457# First one for static linking, second one for loading when used. 458# Note: you need the development package (e.g., ruby1.9.1-dev on Ubuntu). 459# This requires at least "normal" features, "tiny" and "small" don't work. 460#CONF_OPT_RUBY = --enable-rubyinterp 461#CONF_OPT_RUBY = --enable-rubyinterp=dynamic 462#CONF_OPT_RUBY = --enable-rubyinterp --with-ruby-command=ruby1.9.1 463 464# TCL 465# Uncomment this when you want to include the Tcl interface. 466# First one is for static linking, second one for dynamic loading. 467#CONF_OPT_TCL = --enable-tclinterp 468#CONF_OPT_TCL = --enable-tclinterp=dynamic 469#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 470 471# CSCOPE 472# Uncomment this when you want to include the Cscope interface. 473#CONF_OPT_CSCOPE = --enable-cscope 474 475# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 476# Motif version must have XPM libraries (see |netbeans-xpm|). 477# Uncomment this when you do not want the netbeans interface. 478#CONF_OPT_NETBEANS = --disable-netbeans 479 480# CHANNEL - inter process communication. Same conditions as NetBeans. 481# Uncomment this when you do not want inter process communication. 482#CONF_OPT_CHANNEL = --disable-channel 483 484# TERMINAL - Terminal emulator support, :terminal command. Requires the 485# channel feature. The default is enable for when using "huge" features. 486# Uncomment the first line when you want terminal emulator support for 487# not-huge builds. Uncomment the second line when you don't want terminal 488# emulator support in the huge build. 489#CONF_OPT_TERMINAL = --enable-terminal 490#CONF_OPT_TERMINAL = --disable-terminal 491 492# MULTIBYTE - To edit multi-byte characters. 493# This is now always enabled. 494 495# When building with at least "big" features, right-left and Arabic 496# features are enabled. Use this to disable them. 497#CONF_OPT_MULTIBYTE = --disable-rightleft --disable-arabic 498 499# NLS - National Language Support 500# Uncomment this when you do not want to support translated messages, even 501# though configure can find support for it. 502#CONF_OPT_NLS = --disable-nls 503 504# XIM - X Input Method. Special character input support for X11 (Chinese, 505# Japanese, special symbols, etc). Also needed for dead-key support. 506# When omitted it's automatically enabled for the X-windows GUI. 507# HANGUL - Input Hangul (Korean) language using internal routines. 508# Uncomment one of these when you want to input a multibyte language. 509#CONF_OPT_INPUT = --enable-xim 510#CONF_OPT_INPUT = --disable-xim 511#CONF_OPT_INPUT = --enable-hangulinput 512 513# FONTSET - X fontset support for output of languages with many characters. 514# Uncomment this when you want to output a multibyte language. 515#CONF_OPT_OUTPUT = --enable-fontset 516 517# ACL - Uncomment this when you do not want to include ACL support, even 518# though your system does support it. E.g., when it's buggy. 519#CONF_OPT_ACL = --disable-acl 520 521# gpm - For mouse support on Linux console via gpm 522# Uncomment this when you do not want to include gpm support, even 523# though you have gpm libraries and includes. 524#CONF_OPT_GPM = --disable-gpm 525 526# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 527# Uncomment this when you do not want do include sysmouse support, even 528# though you have /dev/sysmouse and includes. 529#CONF_OPT_SYSMOUSE = --disable-sysmouse 530 531# libcanberra - For sound support. Default is on for big features. 532# Uncomment one of the two to chose otherwise. 533# CONF_OPT_CANBERRA = --enable-canberra 534# CONF_OPT_CANBERRA = --disable-canberra 535 536# FEATURES - For creating Vim with more or less features 537# Uncomment one of these lines when you want to include few to many features. 538# The default is "huge" for most systems. 539#CONF_OPT_FEAT = --with-features=tiny 540#CONF_OPT_FEAT = --with-features=small 541#CONF_OPT_FEAT = --with-features=normal 542#CONF_OPT_FEAT = --with-features=big 543#CONF_OPT_FEAT = --with-features=huge 544 545# COMPILED BY - For including a specific e-mail address for ":version". 546#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 547 548# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 549# (otherwise Vim configure will try to include xterm titlebar access) 550# Also disable the GUI above, otherwise it will be included anyway. 551# When both GUI and X11 have been disabled this may save about 15% of the 552# code and make Vim startup quicker. 553#CONF_OPT_X = --without-x 554 555# X WINDOWS DIRECTORY - specify X directories 556# If configure can't find you X stuff, or if you have multiple X11 derivatives 557# installed, you may wish to specify which one to use. 558# Select nothing to let configure choose. 559# This here selects openwin (as found on sun). 560#XROOT = /usr/openwin 561#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 562 563# X11 Session Management Protocol support 564# Vim will try to use XSMP to catch the user logging out if there are unsaved 565# files. Uncomment this line to disable that (it prevents vim trying to open 566# communications with the session manager). 567#CONF_OPT_XSMP = --disable-xsmp 568 569# You may wish to include xsmp but use exclude xsmp-interact if the logout 570# XSMP functionality does not work well with your session-manager (at time of 571# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 572# applications after Vim has cancelled a logout (until Vim quits). This 573# *might* be the Vim code, but is more likely a bug in early GNOME-1. 574# This disables the dialog that asks you if you want to save files or not. 575#CONF_OPT_XSMP = --disable-xsmp-interact 576 577# If you want to always automatically add a servername, also in the terminal. 578#CONF_OPT_AUTOSERVE = --enable-autoservername 579 580# COMPILER - Name of the compiler {{{1 581# The default from configure will mostly be fine, no need to change this, just 582# an example. If a compiler is defined here, configure will use it rather than 583# probing for one. It is dangerous to change this after configure was run. 584# Make will use your choice then -- but beware: Many things may change with 585# another compiler. It is wise to run 'make reconfig' to start all over 586# again. 587#CC = cc 588#CC = gcc 589#CC = clang 590 591# COMPILER FLAGS - change as you please. Either before running {{{1 592# configure or afterwards. For examples see below. 593# When using -g with some older versions of Linux you might get a 594# statically linked executable. 595# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 596#CFLAGS = -g 597#CFLAGS = -O 598 599# Optimization limits - depends on the compiler. Automatic check in configure 600# doesn't work very well, because many compilers only give a warning for 601# unrecognized arguments. 602#CFLAGS = -O -OPT:Olimit=2600 603#CFLAGS = -O -Olimit 2000 604#CFLAGS = -O -FOlimit,2000 605 606# Often used for GCC: mixed optimizing, lot of optimizing, debugging 607#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 608#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 609#CFLAGS = -g -Wall -Wmissing-prototypes 610#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 611#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 612#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 613 614# Use this with GCC to check for mistakes, unused arguments, etc. 615# Note: If you use -Wextra and get warnings in GTK code about function 616# parameters, you can add -Wno-cast-function-type 617#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wunreachable-code -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 618# Add -Wpedantic to find // comments and other C99 constructs. 619# Better disable Perl and Python to avoid a lot of warnings. 620#CFLAGS = -g -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 621#CFLAGS = -g -O2 -Wall -Wextra -Wshadow -Wmissing-prototypes -Wpedantic -Wunreachable-code -Wunused-result -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 622#PYTHON_CFLAGS_EXTRA = -Wno-missing-field-initializers 623#MZSCHEME_CFLAGS_EXTRA = -Wno-unreachable-code -Wno-unused-parameter 624 625# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 626# allocated memory (and makes every malloc()/free() very slow). 627# Electric Fence is free (search ftp sites). 628# You may want to set the EF_PROTECT_BELOW environment variable to check the 629# other side of allocated memory. 630# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 631# as root: sysctl -w vm.max_proc_mmap=30000 632#EXTRA_LIBS = /usr/local/lib/libefence.a 633 634# Autoconf binary. 635AUTOCONF = autoconf 636 637# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 638#PURIFY = purify 639 640# VALGRIND - remove the # to use valgrind for memory leaks and access errors. 641# Used for the unittest targets. 642# VALGRIND = valgrind --tool=memcheck --leak-check=yes --num-callers=25 --log-file=valgrind.$@ 643 644# NBDEBUG - debugging the netbeans interface. 645#EXTRA_DEFS = -DNBDEBUG 646 647# }}} 648 649# LINT - for running lint 650# For standard Unix lint 651LINT = lint 652LINT_OPTIONS = -beprxzF 653# For splint 654# It doesn't work well, crashes on include files and non-ascii characters. 655#LINT = splint 656#LINT_OPTIONS = +unixlib -weak -macrovarprefixexclude -showfunc -linelen 9999 657 658# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 659# Might not work with GUI or Perl. 660# After running Vim see the profile result with: gprof vim gmon.out | vim - 661# Need to recompile everything after changing this: "make clean" "make". 662#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 663#PROFILE_LIBS = -pg 664 665# GCC 5 and later need the -no-pie argument. 666#PROFILE_LIBS = -pg -no-pie 667 668# For unknown reasons adding "-lc" fixes a linking problem with some versions 669# of GCC. That's probably a bug in the "-pg" implementation. 670#PROFILE_LIBS = -pg -lc 671 672 673# TEST COVERAGE - Uncomment the two lines below the explanation to get code 674# coverage information. (provided by Yegappan Lakshmanan) 675# 1. make clean, run configure and build Vim as usual. 676# 2. Generate the baseline code coverage information: 677# $ lcov -c -i -b . -d objects -o objects/coverage_base.info 678# 3. Run "make test" to run the unit tests. The code coverage information will 679# be generated in the src/objects directory. 680# 4. Generate the code coverage information from the tests: 681# $ lcov -c -b . -d objects/ -o objects/coverage_test.info 682# 5. Combine the baseline and test code coverage data: 683# $ lcov -a objects/coverage_base.info -a objects/coverage_test.info -o objects/coverage_total.info 684# 6. Process the test coverage data and generate a report in html: 685# $ genhtml objects/coverage_total.info -o objects 686# 7. Open the objects/index.html file in a web browser to view the coverage 687# information. 688# 689# PROFILE_CFLAGS=-g -O0 -fprofile-arcs -ftest-coverage 690# LDFLAGS=--coverage 691 692 693# Uncomment one of the next two lines to compile Vim with the 694# address sanitizer or with the undefined sanitizer. Works with gcc and 695# clang. May make Vim twice as slow. Errors reported on stderr. 696# More at: https://code.google.com/p/address-sanitizer/ 697#SANITIZER_CFLAGS = -g -O0 -fsanitize=address -fno-omit-frame-pointer 698#SANITIZER_CFLAGS = -g -O0 -fsanitize=undefined -fno-omit-frame-pointer 699SANITIZER_LIBS = $(SANITIZER_CFLAGS) 700 701# MEMORY LEAK DETECTION 702# Requires installing the ccmalloc library. 703# Configuration is in the .ccmalloc or ~/.ccmalloc file. 704# Doesn't work very well, since memory linked to from global variables 705# (in libraries) is also marked as leaked memory. 706#LEAK_CFLAGS = -DEXITFREE 707#LEAK_LIBS = -lccmalloc 708 709# Uncomment this line to have Vim call abort() when an internal error is 710# detected. Useful when using a tool to find errors. 711#ABORT_CFLAGS = -DABORT_ON_INTERNAL_ERROR 712 713##################################################### 714### Specific systems, check if yours is listed! ### {{{ 715##################################################### 716 717### Uncomment things here only if the values chosen by configure are wrong. 718### It's better to adjust configure.ac and "make autoconf", if you can! 719### Then send the required changes to configure.ac to the bugs list. 720 721### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 722### 723#CC = shlicc2 724#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 725 726### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 727### The first probably works on all systems 728### The second should work a bit better on newer systems 729### The third should work a bit better on HPUX 11.11 730### Information provided by: Richard Allen <[email protected]> 731#CC = c89 -D_HPUX_SOURCE 732#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 733#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 734 735### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 736### when the default (ISO) digraphs look completely wrong. 737### After changing this do "touch digraph.c; make". 738#EXTRA_DEFS = -DHPUX_DIGRAPHS 739 740### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 741### is too small to compile many routines. It produces too much defining 742### and no space errors. 743### Uncomment the following to specify a larger macro definition table. 744#CFLAGS = -Wp,-H256000 745 746### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 747### libraries in /usr/lib instead of /lib (avoiding transition links). 748### Information provided by: David Green 749#XROOT = /usr 750#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 751#GUI_INC_LOC = -I/usr/include/Motif1.2 752#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 753 754### (5) AIX 4.1.4 with cc 755#CFLAGS = -O -qmaxmem=8192 756 757### AIX with c89 (Walter Briscoe) 758#CC = c89 759#CPPFLAGS = -D_ALL_SOURCE 760 761### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 762# needed to avoid a problem where strings.h gets included 763#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 764 765### (W) Solaris with multi-threaded libraries (-lthread): 766### If suspending doesn't work properly, try using this line: 767#EXTRA_DEFS = -D_REENTRANT 768 769### (7) Solaris 2.4/2.5 with Centerline compiler 770#CC = clcc 771#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 772#CFLAGS = -O 773 774### (9) Solaris 2.x with cc (SunPro), using Athena. 775### Only required for compiling gui_at_sb.c. 776### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 777### Use one of the lines (either Full ANSI or no ANSI at all) 778#CFLAGS = $(CFLAGS) -Xc 779#CFLAGS = $(CFLAGS) -Xs 780 781### Solaris 2.3 with X11 and specific cc 782#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 783 784### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 785#CC = /usr/ucb/cc 786#EXTRA_LIBS = -R/usr/ucblib 787 788### Solaris with Forte Developer and NetBeans. 789# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 790#CC = cc 791#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 792#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 793#XPM_IPATH = -I$(XPM_DIR)/include 794#EXTRA_LIBS = $(XPM_LIB) 795#EXTRA_IPATHS = $(XPM_IPATH) 796#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 797 798### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 799#LDFLAGS = -lw -ldl -lXmu 800#GUI_LIB_LOC = -L/usr/local/lib 801 802### (8) Unisys 6035 (Glauber Ribeiro) 803#EXTRA_LIBS = -lnsl -lsocket -lgen 804 805### When builtin functions cause problems with gcc (for Sun 4.1.x) 806#CFLAGS = -O2 -Wall -traditional -Wno-implicit 807 808### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 809#EXTRA_DEFS = -DDOMAIN 810#CFLAGS= -O -A systype,bsd4.3 811 812### Coherent 4.2.10 on Intel 386 platform 813#EXTRA_DEFS = -Dvoid=int 814#EXTRA_LIBS = -lterm -lsocket 815 816### SCO 3.2, with different library name for terminfo 817#EXTRA_LIBS = -ltinfo 818 819### UTS2 for Amdahl UTS 2.1.x 820#EXTRA_DEFS = -DUTS2 821#EXTRA_LIBS = -lsocket 822 823### UTS4 for Amdahl UTS 4.x 824#EXTRA_DEFS = -DUTS4 -Xa 825 826### USL for Unix Systems Laboratories (SYSV 4.2) 827#EXTRA_DEFS = -DUSL 828 829### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 830#CC= gcc -D_POSIX_SOURCE 831#CFLAGS= -O2 832#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 833 834### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 835### Also use the CONF_TERM_LIB below! 836#EXTRA_LIBS = -lgen 837 838### (D) QNX (by G.F. Desrochers) 839#CFLAGS = -g -O -mf -4 840 841### (F) QNX (by John Oleynick) 842# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 843# CONF_OPT_X = --without-x. 844# 2. make config 845# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 846# have -ldir (does config find it somewhere?) and -ltermcap has at 847# least one problem so I use termlib.o instead. The problem with 848# termcap is that it segfaults if you call it with the name of 849# a non-existent terminal type. 850# 4. edit auto/config.h and add #define USE_TMPNAM 851# 5. add termlib.o to OBJ 852# 6. make 853 854### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 855#EXTRA_LIBS = -lgen 856 857### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 858#EXTRA_LIBS = -lgen -lnsl 859### For SINIX-Y this is needed for the right prototype of gettimeofday() 860#EXTRA_DEFS = -D_XPG_IV 861 862### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 863# Use both "-F O3" lines for optimization or the "-g" line for debugging 864#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 865#CFLAGS = -F O3 -DSINIXN 866#LDFLAGS = -F O3 867#CFLAGS = -g -DSINIXN 868 869### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 870#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 871#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 872 873### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 874#GUI_INC_LOC = -I/usr/include 875#GUI_LIB_LOC = -L/usr/lib 876#EXTRA_LIBS = -lgen 877 878### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 879#GUI_INC_LOC = -I/usr/necccs/include 880#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 881#XROOT = /usr/necccs 882#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 883#EXTRA_LIBS = -lsocket -lgen 884 885### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 886# Not needed for Irix 5.3, Ives Aerts reported 887#EXTRA_LIBS = -lmalloc -lc_s 888# Irix 4.0, when regexp and regcmp cannot be found when linking: 889#EXTRA_LIBS = -lmalloc -lc_s -lPW 890 891### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 892# Note: This newer option style is used with the MipsPro compilers ONLY if 893# you are compiling an "n32" or "64" ABI binary (use either a -n32 894# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 895# then the CFLAGS option format will be the typical style (i.e. 896# -Olimit 3000). 897#CFLAGS = -OPT:Olimit=3000 -O 898 899### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 900# compiler features! Beware, the optimization is EXTREMELY thorough 901# and takes quite a long time. 902# Note: See the note above. Here, the -mips3 option automatically 903# enables either the "n32" or "64" ABI, depending on what machine you 904# are compiling on (n32 is explicitly enabled here, just to make sure). 905#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 906#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 907 908### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 909### Suggested by Jon Wright <[email protected]>. 910### Tested on R8000 IRIX6.1 Power Indigo2. 911### Check /etc/compiler.defaults for your compiler settings. 912# either (for 64 bit pointers) uncomment the following line 913#GUI_LIB_LOC = -L/usr/lib64 914# then 915# 1) make config 916# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 917# 3) make 918# 919# or (for 32bit pointers) uncomment the following line 920#EXTRA_DEFS = -n32 921#GUI_LIB_LOC = -L/usr/lib32 922# then 923# 1) make config 924# 2) edit auto/config.mk, add -n32 to LDFLAGS 925# 3) make 926# 927#Alternatively: use -o32 instead of -n32. 928### 929 930### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 931### which is found by configure, doesn't work correctly. Symptom is the 932### error message "Termcap entry too long". Uncomment the next line. 933### On AIX 4.2.1 (and other versions probably), libtermcap is reported 934### not to display properly. 935### after changing this, you need to do "make reconfig". 936#CONF_TERM_LIB = --with-tlib=curses 937 938### (E) If you want to use termlib library instead of the automatically found 939### one. After changing this, you need to do "make reconfig". 940#CONF_TERM_LIB = --with-tlib=termlib 941 942### (a) ESIX V4.2 (Reinhard Wobst) 943#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 944 945### (c) Tandem/NSK (Matthew Woehlke) 946#EXTRA_LIBS = -lfloss 947 948### If you want to use ncurses library instead of the automatically found one 949### after changing this, you need to do "make reconfig". 950#CONF_TERM_LIB = --with-tlib=ncurses 951 952### For GCC on MS-Windows, the ".exe" suffix will be added. 953#EXEEXT = .exe 954#LNKEXT = .exe 955 956### (O) For LynxOS 2.5.0, tested on PC. 957#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 958### For LynxOS 3.0.1, tested on PPC 959#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 960### For LynxOS 3.1.0, tested on PC 961#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 962 963 964### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 965### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 966#CFLAGS = -O -Qtarget=m88110compat 967#EXTRA_LIBS = -lgen 968 969# The value of QUOTESED comes from auto/config.mk. 970# Uncomment the next line to use the default value. 971# QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 972 973##################### end of system specific lines ################### }}} 974 975### Names of the programs and targets {{{1 976VIMTARGET = $(VIMNAME)$(EXEEXT) 977EXTARGET = $(EXNAME)$(LNKEXT) 978VIEWTARGET = $(VIEWNAME)$(LNKEXT) 979GVIMNAME = g$(VIMNAME) 980GVIMTARGET = $(GVIMNAME)$(LNKEXT) 981GVIEWNAME = g$(VIEWNAME) 982GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 983RVIMNAME = r$(VIMNAME) 984RVIMTARGET = $(RVIMNAME)$(LNKEXT) 985RVIEWNAME = r$(VIEWNAME) 986RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 987RGVIMNAME = r$(GVIMNAME) 988RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 989RGVIEWNAME = r$(GVIEWNAME) 990RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 991VIMDIFFNAME = $(VIMNAME)diff 992GVIMDIFFNAME = g$(VIMDIFFNAME) 993VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 994GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 995EVIMNAME = e$(VIMNAME) 996EVIMTARGET = $(EVIMNAME)$(LNKEXT) 997EVIEWNAME = e$(VIEWNAME) 998EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 999 1000### Names of the tools that are also made {{{1 1001TOOLS = xxd/xxd$(EXEEXT) 1002 1003### Installation directories. The defaults come from configure. {{{1 1004# 1005### prefix the top directory for the data (default "/usr/local") 1006# 1007# Uncomment the next line to install Vim in your home directory. 1008#prefix = $(HOME) 1009 1010### exec_prefix is the top directory for the executable (default $(prefix)) 1011# 1012# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 1013#exec_prefix = /usr/machine 1014 1015### BINDIR dir for the executable (default "$(exec_prefix)/bin") 1016### MANDIR dir for the manual pages (default "$(prefix)/man") 1017### DATADIR dir for the other files (default "$(prefix)/lib" or 1018# "$(prefix)/share") 1019# They may be different when using different architectures for the 1020# executable and a common directory for the other files. 1021# 1022# Uncomment the next line to install Vim in "/usr/bin" 1023#BINDIR = /usr/bin 1024# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 1025#MANDIR = /usr/share/man 1026# Uncomment the next line to install Vim help files in "/usr/share/vim" 1027#DATADIR = /usr/share 1028 1029### DESTDIR root of the installation tree. This is prepended to the other 1030# directories. This directory must exist. 1031#DESTDIR = ~/pkg/vim 1032 1033### Directory of the man pages 1034MAN1DIR = /man1 1035 1036### Vim version (adjusted by a script) 1037VIMMAJOR = 8 1038VIMMINOR = 1 1039 1040### Location of Vim files (should not need to be changed, and {{{1 1041### some things might not work when they are changed!) 1042VIMDIR = /vim 1043VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 1044HELPSUBDIR = /doc 1045COLSUBDIR = /colors 1046SYNSUBDIR = /syntax 1047INDSUBDIR = /indent 1048AUTOSUBDIR = /autoload 1049PLUGSUBDIR = /plugin 1050FTPLUGSUBDIR = /ftplugin 1051LANGSUBDIR = /lang 1052COMPSUBDIR = /compiler 1053KMAPSUBDIR = /keymap 1054MACROSUBDIR = /macros 1055PACKSUBDIR = /pack 1056TOOLSSUBDIR = /tools 1057TUTORSUBDIR = /tutor 1058SPELLSUBDIR = /spell 1059PRINTSUBDIR = /print 1060PODIR = po 1061 1062### VIMLOC common root of the Vim files (all versions) 1063### VIMRTLOC common root of the runtime Vim files (this version) 1064### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 1065### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 1066### HELPSUBLOC location for help files 1067### COLSUBLOC location for colorscheme files 1068### SYNSUBLOC location for syntax files 1069### INDSUBLOC location for indent files 1070### AUTOSUBLOC location for standard autoload files 1071### PLUGSUBLOC location for standard plugin files 1072### FTPLUGSUBLOC location for ftplugin files 1073### LANGSUBLOC location for language files 1074### COMPSUBLOC location for compiler files 1075### KMAPSUBLOC location for keymap files 1076### MACROSUBLOC location for macro files 1077### PACKSUBLOC location for packages 1078### TOOLSSUBLOC location for tools files 1079### TUTORSUBLOC location for tutor files 1080### SPELLSUBLOC location for spell files 1081### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 1082### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 1083### You can override these if you want to install them somewhere else. 1084### Edit feature.h for compile-time settings. 1085VIMLOC = $(DATADIR)$(VIMDIR) 1086VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 1087VIMRCLOC = $(VIMLOC) 1088HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 1089COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 1090SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 1091INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 1092AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 1093PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 1094FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 1095LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 1096COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 1097KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 1098MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 1099PACKSUBLOC = $(VIMRTLOC)$(PACKSUBDIR) 1100TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 1101TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 1102SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 1103PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 1104SCRIPTLOC = $(VIMRTLOC) 1105 1106### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 1107### the runtime directory is not below it. 1108#VIMRUNTIMEDIR = $(VIMRTLOC) 1109 1110### Name of the defaults/evim/mswin file target. 1111VIM_DEFAULTS_FILE = $(DESTDIR)$(SCRIPTLOC)/defaults.vim 1112EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 1113MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 1114 1115### Name of the menu file target. 1116SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 1117SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 1118SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 1119 1120### Name of the bugreport file target. 1121SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 1122 1123### Name of the rgb.txt file target. 1124SYS_RGB_FILE = $(DESTDIR)$(SCRIPTLOC)/rgb.txt 1125 1126### Name of the file type detection file target. 1127SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 1128 1129### Name of the file type detection file target. 1130SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 1131 1132### Name of the file type detection script file target. 1133SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 1134 1135### Name of the ftplugin-on file target. 1136SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 1137 1138### Name of the ftplugin-off file target. 1139SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 1140 1141### Name of the indent-on file target. 1142SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1143 1144### Name of the indent-off file target. 1145SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1146 1147### Name of the option window script file target. 1148SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1149 1150# Program to install the program in the target directory. Could also be "mv". 1151INSTALL_PROG = cp 1152 1153# Program to install the data in the target directory. Cannot be "mv"! 1154INSTALL_DATA = cp 1155INSTALL_DATA_R = cp -r 1156 1157### Program to run on installed binary. Use the second one to disable strip. 1158#STRIP = strip 1159#STRIP = /bin/true 1160 1161### Permissions for binaries {{{1 1162BINMOD = 755 1163 1164### Permissions for man page 1165MANMOD = 644 1166 1167### Permissions for help files 1168HELPMOD = 644 1169 1170### Permissions for Perl and shell scripts 1171SCRIPTMOD = 755 1172 1173### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1174VIMSCRIPTMOD = 644 1175 1176### Permissions for all directories that are created 1177DIRMOD = 755 1178 1179### Permissions for all other files that are created 1180FILEMOD = 644 1181 1182# Where to copy the man and help files from 1183HELPSOURCE = ../runtime/doc 1184 1185# Where to copy the script files from (menu, bugreport) 1186SCRIPTSOURCE = ../runtime 1187 1188# Where to copy the colorscheme files from 1189COLSOURCE = ../runtime/colors 1190 1191# Where to copy the syntax files from 1192SYNSOURCE = ../runtime/syntax 1193 1194# Where to copy the indent files from 1195INDSOURCE = ../runtime/indent 1196 1197# Where to copy the standard plugin files from 1198AUTOSOURCE = ../runtime/autoload 1199 1200# Where to copy the standard plugin files from 1201PLUGSOURCE = ../runtime/plugin 1202 1203# Where to copy the ftplugin files from 1204FTPLUGSOURCE = ../runtime/ftplugin 1205 1206# Where to copy the macro files from 1207MACROSOURCE = ../runtime/macros 1208 1209# Where to copy the package files from 1210PACKSOURCE = ../runtime/pack 1211 1212# Where to copy the tools files from 1213TOOLSSOURCE = ../runtime/tools 1214 1215# Where to copy the tutor files from 1216TUTORSOURCE = ../runtime/tutor 1217 1218# Where to copy the spell files from 1219SPELLSOURCE = ../runtime/spell 1220 1221# Where to look for language specific files 1222LANGSOURCE = ../runtime/lang 1223 1224# Where to look for compiler files 1225COMPSOURCE = ../runtime/compiler 1226 1227# Where to look for keymap files 1228KMAPSOURCE = ../runtime/keymap 1229 1230# Where to look for print resource files 1231PRINTSOURCE = ../runtime/print 1232 1233# If you are using Linux, you might want to use this to make vim the 1234# default vi editor, it will create a link from vi to Vim when doing 1235# "make install". An existing file will be overwritten! 1236# When not using it, some make programs can't handle an undefined $(LINKIT). 1237#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1238LINKIT = @echo >/dev/null 1239 1240### 1241### GRAPHICAL USER INTERFACE (GUI). {{{1 1242### 'configure --enable-gui' can enable one of these for you if you did set 1243### a corresponding CONF_OPT_GUI above and have X11. 1244### Override configures choice by uncommenting all the following lines. 1245### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1246### for enabling the Athena or Motif GUI. 1247#GUI_SRC = $(NONE_SRC) 1248#GUI_OBJ = $(NONE_OBJ) 1249#GUI_DEFS = $(NONE_DEFS) 1250#GUI_IPATH = $(NONE_IPATH) 1251#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1252#GUI_LIBS1 = $(NONE_LIBS1) 1253#GUI_LIBS2 = $(NONE_LIBS2) 1254#GUI_INSTALL = $(NONE_INSTALL) 1255#GUI_TARGETS = $(NONE_TARGETS) 1256#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1257#GUI_TESTTARGET = $(NONE_TESTTARGET) 1258#GUI_BUNDLE = $(NONE_BUNDLE) 1259 1260# Without a GUI install the normal way. 1261NONE_INSTALL = install_normal 1262 1263### GTK GUI 1264GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c gui_gtk_f.c \ 1265 gui_beval.c $(GRESOURCE_SRC) 1266GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1267 objects/gui_gtk_f.o \ 1268 objects/gui_beval.o $(GRESOURCE_OBJ) 1269GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1270GTK_IPATH = $(GUI_INC_LOC) 1271GTK_LIBS_DIR = $(GUI_LIB_LOC) 1272GTK_LIBS1 = 1273GTK_LIBS2 = $(GTK_LIBNAME) 1274GTK_INSTALL = install_normal install_gui_extra 1275GTK_TARGETS = installglinks 1276GTK_MAN_TARGETS = yes 1277GTK_TESTTARGET = gui 1278GTK_BUNDLE = 1279 1280### Motif GUI 1281MOTIF_SRC = gui.c gui_motif.c gui_x11.c gui_beval.c \ 1282 gui_xmdlg.c gui_xmebw.c 1283MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1284 objects/gui_beval.o \ 1285 objects/gui_xmdlg.o objects/gui_xmebw.o 1286MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1287MOTIF_IPATH = $(GUI_INC_LOC) 1288MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1289MOTIF_LIBS1 = 1290MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1291MOTIF_INSTALL = install_normal install_gui_extra 1292MOTIF_TARGETS = installglinks 1293MOTIF_MAN_TARGETS = yes 1294MOTIF_TESTTARGET = gui 1295MOTIF_BUNDLE = 1296 1297### Athena GUI 1298### Use Xaw3d to make the menus look a little bit nicer 1299#XAW_LIB = -lXaw3d 1300XAW_LIB = -lXaw 1301 1302### When using Xaw3d, uncomment/comment the following lines to also get the 1303### scrollbars from Xaw3d. 1304#ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1305#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1306# objects/gui_beval.o objects/gui_at_fs.o 1307#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1308# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1309# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1310ATHENA_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c \ 1311 gui_at_sb.c gui_at_fs.c 1312ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1313 objects/gui_beval.o \ 1314 objects/gui_at_sb.o objects/gui_at_fs.o 1315ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1316 1317ATHENA_IPATH = $(GUI_INC_LOC) 1318ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1319ATHENA_LIBS1 = $(XAW_LIB) 1320ATHENA_LIBS2 = -lXt 1321ATHENA_INSTALL = install_normal install_gui_extra 1322ATHENA_TARGETS = installglinks 1323ATHENA_MAN_TARGETS = yes 1324ATHENA_TESTTARGET = gui 1325ATHENA_BUNDLE = 1326 1327### neXtaw GUI 1328NEXTAW_LIB = -lneXtaw 1329 1330NEXTAW_SRC = gui.c gui_athena.c gui_x11.c gui_beval.c gui_at_fs.c 1331NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1332 objects/gui_beval.o objects/gui_at_fs.o 1333NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1334 1335NEXTAW_IPATH = $(GUI_INC_LOC) 1336NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1337NEXTAW_LIBS1 = $(NEXTAW_LIB) 1338NEXTAW_LIBS2 = -lXt 1339NEXTAW_INSTALL = install_normal install_gui_extra 1340NEXTAW_TARGETS = installglinks 1341NEXTAW_MAN_TARGETS = yes 1342NEXTAW_TESTTARGET = gui 1343NEXTAW_BUNDLE = 1344 1345### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1346# errors: ld: Undefined symbol 1347# _get_wmShellWidgetClass 1348# _get_applicationShellWidgetClass 1349# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1350# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1351#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1352# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1353# too: 1354#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1355 1356# PHOTON GUI 1357PHOTONGUI_SRC = gui.c gui_photon.c 1358PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o 1359PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1360PHOTONGUI_IPATH = 1361PHOTONGUI_LIBS_DIR = 1362PHOTONGUI_LIBS1 = -lph -lphexlib 1363PHOTONGUI_LIBS2 = 1364PHOTONGUI_INSTALL = install_normal install_gui_extra 1365PHOTONGUI_TARGETS = installglinks 1366PHOTONGUI_MAN_TARGETS = yes 1367PHOTONGUI_TESTTARGET = gui 1368PHOTONGUI_BUNDLE = 1369 1370# CARBON GUI 1371CARBONGUI_SRC = gui.c gui_mac.c 1372CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o 1373CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1374 -Wall -Wno-unknown-pragmas \ 1375 -mdynamic-no-pic -pipe 1376CARBONGUI_IPATH = -I. -Iproto 1377CARBONGUI_LIBS_DIR = 1378CARBONGUI_LIBS1 = -framework Carbon 1379CARBONGUI_LIBS2 = 1380CARBONGUI_INSTALL = install_macosx 1381CARBONGUI_TARGETS = 1382CARBONGUI_MAN_TARGETS = 1383CARBONGUI_TESTTARGET = gui 1384CARBONGUI_BUNDLE = gui_bundle 1385APPDIR = $(VIMNAME).app 1386CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1387 1388# All GUI files 1389ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c 1390ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w32.pro gui_photon.pro 1391 1392# }}} 1393 1394TERM_DEPS = \ 1395 libvterm/include/vterm.h \ 1396 libvterm/include/vterm_keycodes.h \ 1397 libvterm/src/rect.h \ 1398 libvterm/src/utf8.h \ 1399 libvterm/src/vterm_internal.h 1400 1401TERM_SRC = libvterm/src/*.c 1402 1403XDIFF_SRC = \ 1404 xdiff/xdiffi.c \ 1405 xdiff/xemit.c \ 1406 xdiff/xprepare.c \ 1407 xdiff/xutils.c \ 1408 xdiff/xhistogram.c \ 1409 xdiff/xpatience.c \ 1410 1411XDIFF_OBJS = \ 1412 objects/xdiffi.o \ 1413 objects/xemit.o \ 1414 objects/xprepare.o \ 1415 objects/xutils.o \ 1416 objects/xhistogram.o \ 1417 objects/xpatience.o \ 1418 1419XDIFF_INCL = \ 1420 xdiff/xdiff.h \ 1421 xdiff/xdiffi.h \ 1422 xdiff/xemit.h \ 1423 xdiff/xinclude.h \ 1424 xdiff/xmacros.h \ 1425 xdiff/xprepare.h \ 1426 xdiff/xtypes.h \ 1427 xdiff/xutils.h \ 1428 1429### Command to create dependencies based on #include "..." 1430### prototype headers are ignored due to -DPROTO, system 1431### headers #include <...> are ignored if we use the -MM option, as 1432### e.g. provided by gcc-cpp. 1433### Include FEAT_GUI to get dependency on gui.h 1434### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1435CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1436 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1437 1438# flags for cproto 1439# This is for cproto 3 patchlevel 8 or below 1440# __inline, __attribute__ and __extension__ are not recognized by cproto 1441# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1442#NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1443# -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1444# -D__extension__= -D__restrict="" \ 1445# -D__gnuc_va_list=char -D__builtin_va_list=char 1446 1447# 1448# This is for cproto 3 patchlevel 9 or above (currently 4.6, 4.7g) 1449# __inline and __attribute__ are now recognized by cproto 1450# -D"foo()=" is not supported by all compilers so do not use it 1451NO_ATTR= 1452# 1453# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1454# PROTO_FLAGS = -f4 -d -E"$(CPP)" $(NO_ATTR) 1455# 1456# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1457PROTO_FLAGS = -d -E"$(CPP)" $(NO_ATTR) 1458 1459 1460################################################ 1461## no changes required below this line ## 1462################################################ 1463 1464SHELL = /bin/sh 1465 1466# We would normally use "mkdir -p" but it doesn't work properly everywhere. 1467# Using AC_PROG_MKDIR_P in configure.ac has a problem with the "auto" 1468# directory. Always use the install-sh script, it's slower but reliable. 1469MKDIR_P = $(SHELL) install-sh -c -d 1470 1471.SUFFIXES: 1472.SUFFIXES: .c .o .pro 1473 1474VTERM_CFLAGS = -Ilibvterm/include 1475 1476PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1477POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(EXTRA_DEFS) 1478 1479ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(SANITIZER_CFLAGS) $(LEAK_CFLAGS) $(ABORT_CFLAGS) $(POST_DEFS) 1480 1481# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1482# with "-E". 1483OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1484 1485LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) \ 1486 $(RUBY_CFLAGS) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) \ 1487 $(PYTHON3_CFLAGS) $(TCL_CFLAGS) $(VTERM_CFLAGS) \ 1488 -Dinline= -D__extension__= -Dalloca=alloca 1489 1490LINT_EXTRA = -DHANGUL_INPUT -D"__attribute__(x)=" 1491 1492DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1493 1494# Note: MZSCHEME_LIBS must come before LIBS, because LIBS adds -lm which is 1495# needed by racket. 1496ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1497ALL_LIBS = \ 1498 $(GUI_LIBS1) \ 1499 $(GUI_X_LIBS) \ 1500 $(GUI_LIBS2) \ 1501 $(X_PRE_LIBS) \ 1502 $(X_LIBS) \ 1503 $(X_EXTRA_LIBS) \ 1504 $(MZSCHEME_LIBS) \ 1505 $(LIBS) \ 1506 $(EXTRA_LIBS) \ 1507 $(LUA_LIBS) \ 1508 $(PERL_LIBS) \ 1509 $(PYTHON_LIBS) \ 1510 $(PYTHON3_LIBS) \ 1511 $(TCL_LIBS) \ 1512 $(RUBY_LIBS) \ 1513 $(PROFILE_LIBS) \ 1514 $(SANITIZER_LIBS) \ 1515 $(LEAK_LIBS) 1516 1517# abbreviations 1518DEST_BIN = $(DESTDIR)$(BINDIR) 1519DEST_VIM = $(DESTDIR)$(VIMLOC) 1520DEST_RT = $(DESTDIR)$(VIMRTLOC) 1521DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1522DEST_COL = $(DESTDIR)$(COLSUBLOC) 1523DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1524DEST_IND = $(DESTDIR)$(INDSUBLOC) 1525DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1526DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1527DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1528DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1529DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1530DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1531DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1532DEST_PACK = $(DESTDIR)$(PACKSUBLOC) 1533DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1534DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1535DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1536DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1537DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1538DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1539 1540# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1541# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1542# directory first. 1543# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1544DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1545DEST_MAN_DA = $(DEST_MAN_TOP)/da$(MAN1DIR) 1546DEST_MAN_DA_I = $(DEST_MAN_TOP)/da.ISO8859-1$(MAN1DIR) 1547DEST_MAN_DA_U = $(DEST_MAN_TOP)/da.UTF-8$(MAN1DIR) 1548DEST_MAN_DE = $(DEST_MAN_TOP)/de$(MAN1DIR) 1549DEST_MAN_DE_I = $(DEST_MAN_TOP)/de.ISO8859-1$(MAN1DIR) 1550DEST_MAN_DE_U = $(DEST_MAN_TOP)/de.UTF-8$(MAN1DIR) 1551DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1552DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1553DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1554DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1555DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1556DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1557DEST_MAN_JA_U = $(DEST_MAN_TOP)/ja$(MAN1DIR) 1558DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1559DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1560DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1561DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1562DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1563 1564# stuff common to all systems 1565include Make_all.mak 1566 1567# get the list of tests 1568include testdir/Make_all.mak 1569 1570# BASIC_SRC: files that are always used 1571# GUI_SRC: extra GUI files for current configuration 1572# ALL_GUI_SRC: all GUI files for Unix 1573# 1574# SRC: files used for current configuration 1575# ALL_SRC: source files used for make depend and make lint 1576 1577BASIC_SRC = \ 1578 arabic.c \ 1579 autocmd.c \ 1580 beval.c \ 1581 blob.c \ 1582 blowfish.c \ 1583 buffer.c \ 1584 change.c \ 1585 charset.c \ 1586 crypt.c \ 1587 crypt_zip.c \ 1588 debugger.c \ 1589 dict.c \ 1590 diff.c \ 1591 digraph.c \ 1592 edit.c \ 1593 eval.c \ 1594 evalfunc.c \ 1595 ex_cmds.c \ 1596 ex_cmds2.c \ 1597 ex_docmd.c \ 1598 ex_eval.c \ 1599 ex_getln.c \ 1600 fileio.c \ 1601 findfile.c \ 1602 fold.c \ 1603 getchar.c \ 1604 hardcopy.c \ 1605 hashtab.c \ 1606 if_cscope.c \ 1607 if_xcmdsrv.c \ 1608 indent.c \ 1609 insexpand.c \ 1610 json.c \ 1611 list.c \ 1612 main.c \ 1613 mark.c \ 1614 memfile.c \ 1615 memline.c \ 1616 menu.c \ 1617 message.c \ 1618 misc1.c \ 1619 misc2.c \ 1620 move.c \ 1621 mbyte.c \ 1622 normal.c \ 1623 ops.c \ 1624 option.c \ 1625 os_unix.c \ 1626 auto/pathdef.c \ 1627 popupmnu.c \ 1628 popupwin.c \ 1629 pty.c \ 1630 quickfix.c \ 1631 regexp.c \ 1632 screen.c \ 1633 search.c \ 1634 sha256.c \ 1635 sign.c \ 1636 sound.c \ 1637 spell.c \ 1638 spellfile.c \ 1639 syntax.c \ 1640 tag.c \ 1641 term.c \ 1642 terminal.c \ 1643 textprop.c \ 1644 ui.c \ 1645 undo.c \ 1646 usercmd.c \ 1647 userfunc.c \ 1648 version.c \ 1649 window.c \ 1650 $(OS_EXTRA_SRC) 1651 1652SRC = $(BASIC_SRC) \ 1653 $(GUI_SRC) \ 1654 $(TERM_SRC) \ 1655 $(XDIFF_SRC) \ 1656 $(HANGULIN_SRC) \ 1657 $(LUA_SRC) \ 1658 $(MZSCHEME_SRC) \ 1659 $(PERL_SRC) \ 1660 $(PYTHON_SRC) $(PYTHON3_SRC) \ 1661 $(TCL_SRC) \ 1662 $(RUBY_SRC) 1663 1664EXTRA_SRC = hangulin.c if_lua.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1665 if_python.c if_python3.c if_tcl.c if_ruby.c \ 1666 gui_beval.c netbeans.c channel.c \ 1667 $(GRESOURCE_SRC) 1668 1669# Unittest files 1670JSON_TEST_SRC = json_test.c 1671JSON_TEST_TARGET = json_test$(EXEEXT) 1672KWORD_TEST_SRC = kword_test.c 1673KWORD_TEST_TARGET = kword_test$(EXEEXT) 1674MEMFILE_TEST_SRC = memfile_test.c 1675MEMFILE_TEST_TARGET = memfile_test$(EXEEXT) 1676MESSAGE_TEST_SRC = message_test.c 1677MESSAGE_TEST_TARGET = message_test$(EXEEXT) 1678 1679UNITTEST_SRC = $(JSON_TEST_SRC) $(KWORD_TEST_SRC) $(MEMFILE_TEST_SRC) $(MESSAGE_TEST_SRC) 1680UNITTEST_TARGETS = $(JSON_TEST_TARGET) $(KWORD_TEST_TARGET) $(MEMFILE_TEST_TARGET) $(MESSAGE_TEST_TARGET) 1681RUN_UNITTESTS = run_json_test run_kword_test run_memfile_test run_message_test 1682 1683# All sources, also the ones that are not configured 1684ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(UNITTEST_SRC) \ 1685 $(EXTRA_SRC) $(TERM_SRC) $(XDIFF_SRC) 1686 1687# Which files to check with lint. Select one of these three lines. ALL_SRC 1688# checks more, but may not work well for checking a GUI that wasn't configured. 1689# The perl sources also don't work well with lint. 1690LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) \ 1691 $(PYTHON_SRC) $(PYTHON3_SRC) $(TCL_SRC) \ 1692 $(NETBEANS_SRC) $(CHANNEL_SRC) $(TERM_SRC) 1693#LINT_SRC = $(SRC) 1694#LINT_SRC = $(ALL_SRC) 1695#LINT_SRC = $(BASIC_SRC) 1696 1697OBJ_COMMON = \ 1698 objects/arabic.o \ 1699 objects/autocmd.o \ 1700 objects/beval.o \ 1701 objects/buffer.o \ 1702 objects/change.o \ 1703 objects/blob.o \ 1704 objects/blowfish.o \ 1705 objects/crypt.o \ 1706 objects/crypt_zip.o \ 1707 objects/debugger.o \ 1708 objects/dict.o \ 1709 objects/diff.o \ 1710 objects/digraph.o \ 1711 objects/edit.o \ 1712 objects/eval.o \ 1713 objects/evalfunc.o \ 1714 objects/ex_cmds.o \ 1715 objects/ex_cmds2.o \ 1716 objects/ex_docmd.o \ 1717 objects/ex_eval.o \ 1718 objects/ex_getln.o \ 1719 objects/fileio.o \ 1720 objects/findfile.o \ 1721 objects/fold.o \ 1722 objects/getchar.o \ 1723 objects/hardcopy.o \ 1724 objects/hashtab.o \ 1725 $(HANGULIN_OBJ) \ 1726 objects/if_cscope.o \ 1727 objects/if_xcmdsrv.o \ 1728 objects/indent.o \ 1729 objects/insexpand.o \ 1730 objects/list.o \ 1731 objects/mark.o \ 1732 objects/memline.o \ 1733 objects/menu.o \ 1734 objects/misc1.o \ 1735 objects/misc2.o \ 1736 objects/move.o \ 1737 objects/mbyte.o \ 1738 objects/normal.o \ 1739 objects/ops.o \ 1740 objects/option.o \ 1741 objects/os_unix.o \ 1742 objects/pathdef.o \ 1743 objects/popupmnu.o \ 1744 objects/popupwin.o \ 1745 objects/pty.o \ 1746 objects/quickfix.o \ 1747 objects/regexp.o \ 1748 objects/screen.o \ 1749 objects/search.o \ 1750 objects/sha256.o \ 1751 objects/sign.o \ 1752 objects/sound.o \ 1753 objects/spell.o \ 1754 objects/spellfile.o \ 1755 objects/syntax.o \ 1756 objects/tag.o \ 1757 objects/term.o \ 1758 objects/terminal.o \ 1759 objects/textprop.o \ 1760 objects/ui.o \ 1761 objects/undo.o \ 1762 objects/usercmd.o \ 1763 objects/userfunc.o \ 1764 objects/version.o \ 1765 objects/window.o \ 1766 $(GUI_OBJ) \ 1767 $(TERM_OBJ) \ 1768 $(LUA_OBJ) \ 1769 $(MZSCHEME_OBJ) \ 1770 $(PERL_OBJ) \ 1771 $(PYTHON_OBJ) \ 1772 $(PYTHON3_OBJ) \ 1773 $(TCL_OBJ) \ 1774 $(RUBY_OBJ) \ 1775 $(OS_EXTRA_OBJ) \ 1776 $(NETBEANS_OBJ) \ 1777 $(CHANNEL_OBJ) \ 1778 $(XDIFF_OBJS) 1779 1780# The files included by tests are not in OBJ_COMMON. 1781OBJ_MAIN = \ 1782 objects/charset.o \ 1783 objects/json.o \ 1784 objects/main.o \ 1785 objects/memfile.o \ 1786 objects/message.o 1787 1788OBJ = $(OBJ_COMMON) $(OBJ_MAIN) 1789 1790OBJ_JSON_TEST = \ 1791 objects/charset.o \ 1792 objects/memfile.o \ 1793 objects/message.o \ 1794 objects/json_test.o 1795 1796JSON_TEST_OBJ = $(OBJ_COMMON) $(OBJ_JSON_TEST) 1797 1798OBJ_KWORD_TEST = \ 1799 objects/json.o \ 1800 objects/memfile.o \ 1801 objects/message.o \ 1802 objects/kword_test.o 1803 1804KWORD_TEST_OBJ = $(OBJ_COMMON) $(OBJ_KWORD_TEST) 1805 1806OBJ_MEMFILE_TEST = \ 1807 objects/charset.o \ 1808 objects/json.o \ 1809 objects/message.o \ 1810 objects/memfile_test.o 1811 1812MEMFILE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MEMFILE_TEST) 1813 1814OBJ_MESSAGE_TEST = \ 1815 objects/charset.o \ 1816 objects/json.o \ 1817 objects/memfile.o \ 1818 objects/message_test.o 1819 1820MESSAGE_TEST_OBJ = $(OBJ_COMMON) $(OBJ_MESSAGE_TEST) 1821 1822ALL_OBJ = $(OBJ_COMMON) \ 1823 $(OBJ_MAIN) \ 1824 $(OBJ_JSON_TEST) \ 1825 $(OBJ_KWORD_TEST) \ 1826 $(OBJ_MEMFILE_TEST) \ 1827 $(OBJ_MESSAGE_TEST) 1828 1829 1830PRO_AUTO = \ 1831 arabic.pro \ 1832 autocmd.pro \ 1833 blowfish.pro \ 1834 buffer.pro \ 1835 change.pro \ 1836 charset.pro \ 1837 crypt.pro \ 1838 crypt_zip.pro \ 1839 debugger.pro \ 1840 dict.pro \ 1841 diff.pro \ 1842 digraph.pro \ 1843 edit.pro \ 1844 eval.pro \ 1845 evalfunc.pro \ 1846 ex_cmds.pro \ 1847 ex_cmds2.pro \ 1848 ex_docmd.pro \ 1849 ex_eval.pro \ 1850 ex_getln.pro \ 1851 fileio.pro \ 1852 findfile.pro \ 1853 fold.pro \ 1854 getchar.pro \ 1855 hardcopy.pro \ 1856 hashtab.pro \ 1857 hangulin.pro \ 1858 if_cscope.pro \ 1859 if_lua.pro \ 1860 if_mzsch.pro \ 1861 if_python.pro \ 1862 if_python3.pro \ 1863 if_ruby.pro \ 1864 if_xcmdsrv.pro \ 1865 indent.pro \ 1866 insexpand.pro \ 1867 json.pro \ 1868 list.pro \ 1869 main.pro \ 1870 mark.pro \ 1871 mbyte.pro \ 1872 memfile.pro \ 1873 memline.pro \ 1874 menu.pro \ 1875 message.pro \ 1876 misc1.pro \ 1877 misc2.pro \ 1878 move.pro \ 1879 normal.pro \ 1880 ops.pro \ 1881 option.pro \ 1882 os_mac_conv.pro \ 1883 os_unix.pro \ 1884 popupmnu.pro \ 1885 popupwin.pro \ 1886 pty.pro \ 1887 quickfix.pro \ 1888 regexp.pro \ 1889 screen.pro \ 1890 search.pro \ 1891 sha256.pro \ 1892 sign.pro \ 1893 sound.pro \ 1894 spell.pro \ 1895 spellfile.pro \ 1896 syntax.pro \ 1897 tag.pro \ 1898 term.pro \ 1899 terminal.pro \ 1900 termlib.pro \ 1901 textprop.pro \ 1902 ui.pro \ 1903 undo.pro \ 1904 usercmd.pro \ 1905 userfunc.pro \ 1906 version.pro \ 1907 window.pro \ 1908 beval.pro \ 1909 gui_beval.pro \ 1910 netbeans.pro \ 1911 channel.pro \ 1912 $(ALL_GUI_PRO) \ 1913 $(TCL_PRO) 1914 1915# Resources used for the Mac are in one directory. 1916RSRC_DIR = os_mac_rsrc 1917 1918PRO_MANUAL = os_amiga.pro os_win32.pro \ 1919 os_mswin.pro winclip.pro os_beos.pro os_vms.pro $(PERL_PRO) 1920 1921# Default target is making the executable and tools 1922all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1923 1924tools: $(TOOLS) 1925 1926# Run configure with all the setting from above. 1927# 1928# Note: auto/config.h doesn't depend on configure, because running configure 1929# doesn't always update auto/config.h. The timestamp isn't changed if the 1930# file contents didn't change (to avoid recompiling everything). Including a 1931# dependency on auto/config.h would cause running configure each time when 1932# auto/config.h isn't updated. The dependency on auto/config.mk should make 1933# sure configure is run when it's needed. 1934# 1935# Remove the config.cache every time, once in a while it causes problems that 1936# are very hard to figure out. 1937# 1938config auto/config.mk: auto/configure config.mk.in config.h.in 1939 -rm -f auto/config.cache 1940 if test "X$(MAKECMDGOALS)" != "Xclean" \ 1941 -a "X$(MAKECMDGOALS)" != "Xdistclean" \ 1942 -a "X$(MAKECMDGOALS)" != "Xautoconf" \ 1943 -a "X$(MAKECMDGOALS)" != "Xreconfig"; then \ 1944 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1945 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1946 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1947 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1948 $(CONF_OPT_AUTOSERVE) $(CONF_OPT_DARWIN) $(CONF_OPT_FAIL) \ 1949 $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) $(CONF_OPT_PYTHON3) \ 1950 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1951 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1952 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) \ 1953 $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1954 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1955 $(CONF_OPT_CHANNEL) $(CONF_OPT_TERMINAL) \ 1956 $(CONF_ARGS) $(CONF_ARGS1) $(CONF_ARGS2) $(CONF_ARGS3) \ 1957 $(CONF_ARGS4) $(CONF_ARGS5) $(CONF_ARGS6) \ 1958 $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1959 $(CONF_OPT_LUA) $(CONF_OPT_LUA_PREFIX) \ 1960 $(CONF_OPT_SYSMOUSE) $(CONF_OPT_CANBERRA); \ 1961 fi 1962 1963# Use "make reconfig" to rerun configure without cached values. 1964# When config.h changes, most things will be recompiled automatically. 1965# Invoke $(MAKE) to run config with the empty auto/config.mk. 1966# Invoke $(MAKE) to build all with the filled auto/config.mk. 1967reconfig: scratch clean 1968 $(MAKE) -f Makefile config 1969 $(MAKE) -f Makefile all 1970 1971# Run autoconf to produce auto/configure. 1972# Note: 1973# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1974# producing auto/configure. 1975# - autoconf is not run automatically, because a patch usually changes both 1976# configure.ac and auto/configure but can't update the timestamps. People 1977# who do not have (the correct version of) autoconf would run into trouble. 1978# 1979# Two tricks are required to make autoconf put its output in the "auto" dir: 1980# - Temporarily move the ./configure script to ./configure.save. Don't 1981# overwrite it, it's probably the result of an aborted autoconf. 1982# - Use sed to change ./config.log to auto/config.log in the configure script. 1983# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1984# care of: 1985# - configure.lineno: has the line numbers replaced with $LINENO. That 1986# improves patches a LOT, thus use it instead (until someone says it doesn't 1987# work on some system). 1988# - autom4te.cache directory is created and not cleaned up. Delete it. 1989# - Uses ">config.log" instead of "./config.log". 1990autoconf: 1991 if test ! -f configure.save; then mv configure configure.save; fi 1992 $(AUTOCONF) 1993 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1994 chmod 755 auto/configure 1995 mv -f configure.save configure 1996 -rm -rf autom4te.cache 1997 -rm -f auto/config.status auto/config.cache 1998 1999# Run vim script to generate the Ex command lookup table. 2000# This only needs to be run when a command name has been added or changed. 2001# If this fails because you don't have Vim yet, first build and install Vim 2002# without changes. 2003cmdidxs: ex_cmds.h 2004 vim --clean -X -u create_cmdidxs.vim 2005 2006 2007# The normal command to compile a .c file to its .o file. 2008# Without or with ALL_CFLAGS. 2009CCC_NF = $(CC) -c -I$(srcdir) 2010CCC = $(CCC_NF) $(ALL_CFLAGS) 2011 2012 2013# Link the target for normal use or debugging. 2014# A shell script is used to try linking without unnecessary libraries. 2015$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 2016 $(CCC) version.c -o objects/version.o 2017 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2018 -o $(VIMTARGET) $(OBJ) $(ALL_LIBS)" \ 2019 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2020 sh $(srcdir)/link.sh 2021 2022xxd/xxd$(EXEEXT): xxd/xxd.c 2023 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" LDFLAGS="$(LDFLAGS)" \ 2024 $(MAKE) -f Makefile 2025 2026# Build the language specific files if they were unpacked. 2027# Generate the converted .mo files separately, it's no problem if this fails. 2028languages: 2029 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2030 cd $(PODIR); \ 2031 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 2032 fi 2033 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2034 cd $(PODIR); \ 2035 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 2036 fi 2037 2038# Update the *.po files for changes in the sources. Only run manually. 2039update-po: 2040 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 2041 2042# Generate function prototypes. This is not needed to compile vim, but if 2043# you want to use it, cproto is out there on the net somewhere -- Webb 2044# 2045# When generating os_amiga.pro and os_win32.pro there will be a 2046# few include files that can not be found, that's OK. 2047 2048proto: $(PRO_AUTO) $(PRO_MANUAL) 2049 2050# Filter out arguments that cproto doesn't support. 2051# Don't pass "-pthread", "-fwrapv" and similar arguments to cproto, it sees 2052# them as a list of individual flags. 2053# The -E"gcc -E" argument must be separate to avoid problems with shell 2054# quoting. 2055# Strip -O2, it may cause cproto to write stderr to the file "2". 2056CPROTO = cproto $(PROTO_FLAGS) -DPROTO \ 2057 `echo '$(LINT_CFLAGS)' | sed -e 's/ -[a-z-]\+//g' -e 's/ -O[^ ]\+//g'` 2058 2059### Would be nice if this would work for "normal" make. 2060### Currently it only works for (Free)BSD make. 2061#$(PRO_AUTO): $$(*F).c 2062# $(CPROTO) -DFEAT_GUI $(*F).c > $@ 2063 2064# Always define FEAT_GUI. This may generate a few warnings if it's also 2065# defined in auto/config.h, you can ignore that. 2066.c.pro: 2067 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2068 echo "/* vim: set ft=c : */" >> proto/$@ 2069 2070os_amiga.pro: os_amiga.c 2071 $(CPROTO) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 2072 echo "/* vim: set ft=c : */" >> proto/$@ 2073 2074os_win32.pro: os_win32.c 2075 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2076 echo "/* vim: set ft=c : */" >> proto/$@ 2077 2078os_mswin.pro: os_mswin.c 2079 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2080 echo "/* vim: set ft=c : */" >> proto/$@ 2081 2082winclip.pro: winclip.c 2083 $(CPROTO) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 2084 echo "/* vim: set ft=c : */" >> proto/$@ 2085 2086os_beos.pro: os_beos.c 2087 $(CPROTO) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 2088 echo "/* vim: set ft=c : */" >> proto/$@ 2089 2090os_vms.pro: os_vms.c 2091# must use os_vms_conf.h for auto/config.h 2092 mv auto/config.h auto/config.h.save 2093 cp os_vms_conf.h auto/config.h 2094 $(CPROTO) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 2095 echo "/* vim: set ft=c : */" >> proto/$@ 2096 rm auto/config.h 2097 mv auto/config.h.save auto/config.h 2098 2099# if_perl.pro is special: Use the generated if_perl.c for input and remove 2100# prototypes for local functions. 2101if_perl.pro: auto/if_perl.c 2102 $(CPROTO) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 2103 2104gui_gtk_gresources.pro: auto/gui_gtk_gresources.c 2105 $(CPROTO) -DFEAT_GUI $< > proto/$@ 2106 echo "/* vim: set ft=c : */" >> proto/$@ 2107 2108notags: 2109 -rm -f tags 2110 2111# Note: tags is made for the currently configured version, can't include both 2112# Motif and Athena GUI 2113# You can ignore error messages for missing files. 2114tags TAGS: notags 2115 $(TAGPRG) $(TAGS_FILES) 2116 2117# Make a highlight file for types. Requires Exuberant ctags and awk 2118types: types.vim 2119types.vim: $(TAGS_FILES) 2120 ctags --c-kinds=gstu -o- $(TAGS_FILES) |\ 2121 awk 'BEGIN{printf("syntax keyword Type\t")}\ 2122 {printf("%s ", $$1)}END{print ""}' > $@ 2123 echo "syn keyword Constant OK FAIL TRUE FALSE MAYBE" >> $@ 2124 2125# TESTING 2126# 2127# Execute the test scripts and the unittests. 2128# Do the scripttests first, so that the summary shows last. 2129test check: unittests test_libvterm scripttests 2130 2131# Execute the test scripts. Run these after compiling Vim, before installing. 2132# This doesn't depend on $(VIMTARGET), because that won't work when configure 2133# wasn't run yet. Restart make to build it instead. 2134# 2135# This will produce a lot of garbage on your screen, including a few error 2136# messages. Don't worry about that. 2137# If there is a real error, there will be a difference between "testXX.out" and 2138# a "testXX.ok" file. 2139# If everything is alright, the final message will be "ALL DONE". If not you 2140# get "TEST FAILURE". 2141# 2142scripttests: 2143 $(MAKE) -f Makefile $(VIMTARGET) 2144 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2145 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 2146 fi 2147 -if test $(VIMTARGET) != vim -a ! -r vim; then \ 2148 ln -s $(VIMTARGET) vim; \ 2149 fi 2150 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2151 2152# Run the tests with the GUI. Assumes vim/gvim was already built 2153testgui: 2154 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) GUI_FLAG=-g $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2155 2156benchmark: 2157 cd testdir; $(MAKE) -f Makefile benchmark VIMPROG=../$(VIMTARGET) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2158 2159unittesttargets: 2160 $(MAKE) -f Makefile $(UNITTEST_TARGETS) 2161 2162# Swap these lines to run individual tests with gvim instead of vim. 2163VIMTESTTARGET = $(VIMTARGET) 2164# VIMTESTTARGET = $(GVIMTARGET) 2165 2166# Execute the unittests one by one. 2167unittest unittests: $(RUN_UNITTESTS) 2168 2169run_json_test: $(JSON_TEST_TARGET) 2170 $(VALGRIND) ./$(JSON_TEST_TARGET) || exit 1; echo $* passed; 2171 2172run_kword_test: $(KWORD_TEST_TARGET) 2173 $(VALGRIND) ./$(KWORD_TEST_TARGET) || exit 1; echo $* passed; 2174 2175run_memfile_test: $(MEMFILE_TEST_TARGET) 2176 $(VALGRIND) ./$(MEMFILE_TEST_TARGET) || exit 1; echo $* passed; 2177 2178run_message_test: $(MESSAGE_TEST_TARGET) 2179 $(VALGRIND) ./$(MESSAGE_TEST_TARGET) || exit 1; echo $* passed; 2180 2181# Run the libvterm tests. 2182# This currently doesn't work on Mac, only run on Linux for now. 2183test_libvterm: 2184 @if test `uname` = "Linux"; then \ 2185 cd libvterm; $(MAKE) -f Makefile test \ 2186 CC="$(CC)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"; \ 2187 fi 2188 2189# Run individual OLD style test. 2190# These do not depend on the executable, compile it when needed. 2191test1 \ 2192 test_eval \ 2193 test39 \ 2194 test42 test44 test48 test49 \ 2195 test52 test59 \ 2196 test64 test69 \ 2197 test70 test72 \ 2198 test86 test87 test88 \ 2199 test94 test95 test99: 2200 cd testdir; rm -f $@.out; $(MAKE) -f Makefile $@.out VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2201 2202# Run individual NEW style test. 2203# These do not depend on the executable, compile it when needed. 2204$(NEW_TESTS): 2205 cd testdir; $(MAKE) $@ VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2206 2207newtests: 2208 cd testdir; rm -f $@.res test.log messages; $(MAKE) -f Makefile newtestssilent VIMPROG=../$(VIMTESTTARGET) $(GUI_TESTARG) SCRIPTSOURCE=../$(SCRIPTSOURCE) 2209 @if test -f testdir/test.log; then \ 2210 cat testdir/test.log; \ 2211 fi 2212 cat testdir/messages 2213 2214testclean: 2215 cd testdir; $(MAKE) -f Makefile clean 2216 if test -d $(PODIR); then \ 2217 cd $(PODIR); $(MAKE) checkclean; \ 2218 fi 2219 2220# Unittests 2221# It's build just like Vim to satisfy all dependencies. 2222$(JSON_TEST_TARGET): auto/config.mk objects $(JSON_TEST_OBJ) 2223 $(CCC) version.c -o objects/version.o 2224 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2225 -o $(JSON_TEST_TARGET) $(JSON_TEST_OBJ) $(ALL_LIBS)" \ 2226 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2227 sh $(srcdir)/link.sh 2228 2229$(KWORD_TEST_TARGET): auto/config.mk objects $(KWORD_TEST_OBJ) 2230 $(CCC) version.c -o objects/version.o 2231 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2232 -o $(KWORD_TEST_TARGET) $(KWORD_TEST_OBJ) $(ALL_LIBS)" \ 2233 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2234 sh $(srcdir)/link.sh 2235 2236$(MEMFILE_TEST_TARGET): auto/config.mk objects $(MEMFILE_TEST_OBJ) 2237 $(CCC) version.c -o objects/version.o 2238 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2239 -o $(MEMFILE_TEST_TARGET) $(MEMFILE_TEST_OBJ) $(ALL_LIBS)" \ 2240 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2241 sh $(srcdir)/link.sh 2242 2243$(MESSAGE_TEST_TARGET): auto/config.mk objects $(MESSAGE_TEST_OBJ) 2244 $(CCC) version.c -o objects/version.o 2245 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 2246 -o $(MESSAGE_TEST_TARGET) $(MESSAGE_TEST_OBJ) $(ALL_LIBS)" \ 2247 MAKE="$(MAKE)" LINK_AS_NEEDED=$(LINK_AS_NEEDED) \ 2248 sh $(srcdir)/link.sh 2249 2250# install targets 2251 2252install: $(GUI_INSTALL) 2253 2254install_normal: installvim installtools $(INSTALL_LANGS) install-icons 2255 2256install_gui_extra: installgtutorbin 2257 2258installvim: installvimbin installtutorbin \ 2259 installruntime installlinks installmanlinks 2260 2261# 2262# Avoid overwriting an existing executable, somebody might be running it and 2263# overwriting it could cause it to crash. Deleting it is OK, it won't be 2264# really deleted until all running processes for it have exited. It is 2265# renamed first, in case the deleting doesn't work. 2266# 2267# If you want to keep an older version, rename it before running "make 2268# install". 2269# 2270installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 2271 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 2272 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 2273 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 2274 fi 2275 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 2276 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 2277 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 2278# may create a link to the new executable from /usr/bin/vi 2279 -$(LINKIT) 2280 2281# Long list of arguments for the shell script that installs the manual pages 2282# for one language. 2283INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 2284 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 2285 2286# Install most of the runtime files 2287installruntime: installrtbase installmacros installpack installtutor installspell 2288 2289# install the help files; first adjust the contents for the final location 2290installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 2291 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 2292 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml \ 2293 $(DEST_PLUG) $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 2294 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 2295# Generate the help tags with ":helptags" to handle all languages. 2296# Move the distributed tags file aside and restore it, to avoid it being 2297# different from the repository. 2298 cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)" -a -f tags; then \ 2299 mv -f tags tags.dist; fi 2300 @echo generating help tags 2301 -@cd $(HELPSOURCE); if test -z "$(CROSS_COMPILING)"; then \ 2302 $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags; fi 2303 cd $(HELPSOURCE); \ 2304 files=`ls *.txt tags`; \ 2305 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 2306 $(INSTALL_DATA) $$files $(DEST_HELP); \ 2307 cd $(DEST_HELP); \ 2308 chmod $(HELPMOD) $$files 2309 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 2310 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 2311 cd $(HELPSOURCE); if test -f tags.dist; then mv -f tags.dist tags; fi 2312# install the menu files 2313 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 2314 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 2315 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 2316 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 2317 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 2318 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 2319# install the defaults/evim/mswin file 2320 $(INSTALL_DATA) $(SCRIPTSOURCE)/defaults.vim $(VIM_DEFAULTS_FILE) 2321 chmod $(VIMSCRIPTMOD) $(VIM_DEFAULTS_FILE) 2322 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 2323 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 2324 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 2325 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 2326# install the rgb.txt file 2327 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(SYS_RGB_FILE) 2328 chmod $(VIMSCRIPTMOD) $(SYS_RGB_FILE) 2329# install the bugreport file 2330 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 2331 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 2332# install the example vimrc files 2333 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 2334 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 2335 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 2336 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 2337# install the file type detection files 2338 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 2339 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 2340 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 2341 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 2342 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 2343 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 2344 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 2345 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 2346 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 2347 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 2348 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 2349 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 2350 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 2351 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 2352 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 2353 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 2354# install the print resource files 2355 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 2356 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 2357# install the colorscheme files 2358 cd $(COLSOURCE); $(INSTALL_DATA_R) *.vim tools README.txt $(DEST_COL) 2359 cd $(DEST_COL); chmod $(DIRMOD) tools 2360 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt tools/*.vim 2361# install the syntax files 2362 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 2363 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 2364# install the indent files 2365 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 2366 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 2367# install the standard autoload files 2368 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 2369 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 2370 cd $(AUTOSOURCE)/dist; $(INSTALL_DATA) *.vim $(DEST_AUTO)/dist 2371 cd $(DEST_AUTO)/dist; chmod $(HELPMOD) *.vim 2372 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 2373 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 2374# install the standard plugin files 2375 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 2376 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 2377# install the ftplugin files 2378 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt logtalk.dict $(DEST_FTP) 2379 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 2380# install the compiler files 2381 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 2382 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 2383 2384installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 2385 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 2386 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 2387 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 2388 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 2389# When using CVS some CVS directories might have been copied. 2390# Also delete AAPDIR and *.info files. 2391 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR -o -name "*.info" \) -print`; \ 2392 if test -n "$$cvs"; then \ 2393 rm -rf $$cvs; \ 2394 fi 2395 2396installpack: $(DEST_VIM) $(DEST_RT) $(DEST_PACK) 2397 $(INSTALL_DATA_R) $(PACKSOURCE)/* $(DEST_PACK) 2398 chmod $(DIRMOD) `find $(DEST_PACK) -type d -print` 2399 chmod $(FILEMOD) `find $(DEST_PACK) -type f -print` 2400 2401# install the tutor files 2402installtutorbin: $(DEST_VIM) 2403 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 2404 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 2405 2406installgtutorbin: $(DEST_VIM) 2407 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 2408 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 2409 2410installtutor: $(DEST_RT) $(DEST_TUTOR) 2411 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 2412 -rm -f $(DEST_TUTOR)/*.info 2413 chmod $(HELPMOD) $(DEST_TUTOR)/* 2414 2415# Install the spell files, if they exist. This assumes at least the English 2416# spell file is there. 2417installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 2418 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 2419 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 2420 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 2421 fi 2422 2423# install helper program xxd 2424installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2425 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 2426 $(INSTALL_TOOL_LANGS) 2427 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 2428 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 2429 rm -f $(DEST_BIN)/xxd.rm; \ 2430 fi 2431 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 2432 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 2433 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 2434 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 2435 2436# install the runtime tools 2437 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 2438# When using CVS some CVS directories might have been copied. 2439 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 2440 if test -n "$$cvs"; then \ 2441 rm -rf $$cvs; \ 2442 fi 2443 -chmod $(FILEMOD) $(DEST_TOOLS)/* 2444# replace the path in some tools 2445 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 2446 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2447 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 2448 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 2449 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 2450 2451# install the language specific files for tools, if they were unpacked 2452install-tool-languages: 2453 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2454 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2455 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2456 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2457 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2458 -$(SHELL) ./installman.sh xxd $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2459 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2460 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2461 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2462 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2463 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2464 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2465 -$(SHELL) ./installman.sh xxd $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2466 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2467 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2468 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2469 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2470 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2471 2472# install the language specific files, if they were unpacked 2473install-languages: languages $(DEST_LANG) $(DEST_KMAP) 2474 -$(SHELL) ./installman.sh install $(DEST_MAN_DA) "-da" $(INSTALLMANARGS) 2475 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_I) "-da" $(INSTALLMANARGS) 2476 -$(SHELL) ./installman.sh install $(DEST_MAN_DA_U) "-da.UTF-8" $(INSTALLMANARGS) 2477 -$(SHELL) ./installman.sh install $(DEST_MAN_DE) "-de" $(INSTALLMANARGS) 2478 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_I) "-de" $(INSTALLMANARGS) 2479 -$(SHELL) ./installman.sh install $(DEST_MAN_DE_U) "-de.UTF-8" $(INSTALLMANARGS) 2480 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 2481 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 2482 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 2483 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 2484 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 2485 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 2486 -$(SHELL) ./installman.sh install $(DEST_MAN_JA_U) "-ja.UTF-8" $(INSTALLMANARGS) 2487 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 2488 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 2489 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 2490 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 2491 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 2492 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2493 $(DEST_MAN_DA) $(INSTALLMLARGS) 2494 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2495 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2496 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2497 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2498 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2499 $(DEST_MAN_DE) $(INSTALLMLARGS) 2500 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2501 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2502 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2503 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2504 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2505 $(DEST_MAN_FR) $(INSTALLMLARGS) 2506 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2507 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2508 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2509 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2510 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2511 $(DEST_MAN_IT) $(INSTALLMLARGS) 2512 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2513 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2514 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2515 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2516 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2517 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2518 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2519 $(DEST_MAN_PL) $(INSTALLMLARGS) 2520 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2521 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2522 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2523 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2524 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2525 $(DEST_MAN_RU) $(INSTALLMLARGS) 2526 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2527 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2528 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 2529 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 2530 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 2531 fi 2532 if test -d $(LANGSOURCE); then \ 2533 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 2534 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 2535 fi 2536 if test -d $(KMAPSOURCE); then \ 2537 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 2538 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 2539 fi 2540 2541# Install the icons for KDE, if the directory exists and the icon doesn't. 2542# Always when $(DESTDIR) is not empty. 2543ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 2544ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 2545ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2546ICONTHEMEPATH = $(DATADIR)/icons/hicolor 2547DESKTOPPATH = $(DESTDIR)$(DATADIR)/applications 2548KDEPATH = $(HOME)/.kde/share/icons 2549install-icons: 2550 if test -n "$(DESTDIR)"; then \ 2551 $(MKDIR_P) $(ICON48PATH) $(ICON32PATH) \ 2552 $(ICON16PATH) $(DESKTOPPATH); \ 2553 fi 2554 2555 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2556 -a ! -f $(ICON48PATH)/gvim.png; then \ 2557 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2558 if test -z "$(DESTDIR)" -a -x "$(GTK_UPDATE_ICON_CACHE)" \ 2559 -a -w $(ICONTHEMEPATH) \ 2560 -a -f $(ICONTHEMEPATH)/index.theme; then \ 2561 $(GTK_UPDATE_ICON_CACHE) -q $(ICONTHEMEPATH); \ 2562 fi \ 2563 fi 2564 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2565 -a ! -f $(ICON32PATH)/gvim.png; then \ 2566 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2567 fi 2568 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2569 -a ! -f $(ICON16PATH)/gvim.png; then \ 2570 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2571 fi 2572 if test -d $(DESKTOPPATH) -a -w $(DESKTOPPATH); then \ 2573 if test -f po/vim.desktop -a -f po/gvim.desktop; then \ 2574 $(INSTALL_DATA) po/vim.desktop po/gvim.desktop \ 2575 $(DESKTOPPATH); \ 2576 else \ 2577 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim.desktop \ 2578 $(SCRIPTSOURCE)/gvim.desktop \ 2579 $(DESKTOPPATH); \ 2580 fi; \ 2581 if test -z "$(DESTDIR)" -a -x "$(UPDATE_DESKTOP_DATABASE)"; then \ 2582 $(UPDATE_DESKTOP_DATABASE) -q $(DESKTOPPATH); \ 2583 fi \ 2584 fi 2585 2586$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2587 @echo Runtime files not found. 2588 @echo You need to unpack the runtime archive before running "make install". 2589 test -f error 2590 2591$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2592 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2593 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2594 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) $(DEST_MACRO) \ 2595 $(DEST_PACK) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2596 $(DEST_AUTO) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_PLUG): 2597 $(MKDIR_P) $@ 2598 -chmod $(DIRMOD) $@ 2599 2600# create links from various names to vim. This is only done when the links 2601# (or executables with the same name) don't exist yet. 2602installlinks: $(GUI_TARGETS) \ 2603 $(DEST_BIN)/$(EXTARGET) \ 2604 $(DEST_BIN)/$(VIEWTARGET) \ 2605 $(DEST_BIN)/$(RVIMTARGET) \ 2606 $(DEST_BIN)/$(RVIEWTARGET) \ 2607 $(INSTALLVIMDIFF) 2608 2609installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2610 $(DEST_BIN)/$(GVIEWTARGET) \ 2611 $(DEST_BIN)/$(RGVIMTARGET) \ 2612 $(DEST_BIN)/$(RGVIEWTARGET) \ 2613 $(DEST_BIN)/$(EVIMTARGET) \ 2614 $(DEST_BIN)/$(EVIEWTARGET) \ 2615 $(INSTALLGVIMDIFF) 2616 2617installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2618installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2619 2620$(DEST_BIN)/$(EXTARGET): 2621 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2622 2623$(DEST_BIN)/$(VIEWTARGET): 2624 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2625 2626$(DEST_BIN)/$(GVIMTARGET): 2627 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2628 2629$(DEST_BIN)/$(GVIEWTARGET): 2630 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2631 2632$(DEST_BIN)/$(RVIMTARGET): 2633 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2634 2635$(DEST_BIN)/$(RVIEWTARGET): 2636 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2637 2638$(DEST_BIN)/$(RGVIMTARGET): 2639 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2640 2641$(DEST_BIN)/$(RGVIEWTARGET): 2642 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2643 2644$(DEST_BIN)/$(VIMDIFFTARGET): 2645 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2646 2647$(DEST_BIN)/$(GVIMDIFFTARGET): 2648 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2649 2650$(DEST_BIN)/$(EVIMTARGET): 2651 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2652 2653$(DEST_BIN)/$(EVIEWTARGET): 2654 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2655 2656# Create links for the manual pages with various names to vim. This is only 2657# done when the links (or manpages with the same name) don't exist yet. 2658 2659INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2660 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2661 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2662 $(GVIMDIFFNAME) $(EVIEWNAME) 2663 2664installmanlinks: 2665 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2666 $(DEST_MAN) $(INSTALLMLARGS) 2667 2668uninstall: uninstall_runtime 2669 -rm -f $(DEST_BIN)/$(VIMTARGET) 2670 -rm -f $(DEST_BIN)/vimtutor 2671 -rm -f $(DEST_BIN)/gvimtutor 2672 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2673 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2674 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2675 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2676 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2677 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2678 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2679 2680# Note: the "rmdir" will fail if any files were added after "make install" 2681uninstall_runtime: 2682 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2683 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA) "" $(INSTALLMANARGS) 2684 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_I) "" $(INSTALLMANARGS) 2685 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DA_U) "" $(INSTALLMANARGS) 2686 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE) "" $(INSTALLMANARGS) 2687 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_I) "" $(INSTALLMANARGS) 2688 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_DE_U) "" $(INSTALLMANARGS) 2689 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2690 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2691 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2692 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2693 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2694 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2695 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_JA_U) "" $(INSTALLMANARGS) 2696 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2697 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2698 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2699 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2700 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2701 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2702 $(DEST_MAN) $(INSTALLMLARGS) 2703 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2704 $(DEST_MAN_DA) $(INSTALLMLARGS) 2705 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2706 $(DEST_MAN_DA_I) $(INSTALLMLARGS) 2707 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2708 $(DEST_MAN_DA_U) $(INSTALLMLARGS) 2709 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2710 $(DEST_MAN_DE) $(INSTALLMLARGS) 2711 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2712 $(DEST_MAN_DE_I) $(INSTALLMLARGS) 2713 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2714 $(DEST_MAN_DE_U) $(INSTALLMLARGS) 2715 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2716 $(DEST_MAN_FR) $(INSTALLMLARGS) 2717 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2718 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2719 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2720 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2721 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2722 $(DEST_MAN_IT) $(INSTALLMLARGS) 2723 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2724 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2725 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2726 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2727 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2728 $(DEST_MAN_JA_U) $(INSTALLMLARGS) 2729 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2730 $(DEST_MAN_PL) $(INSTALLMLARGS) 2731 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2732 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2733 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2734 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2735 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2736 $(DEST_MAN_RU) $(INSTALLMLARGS) 2737 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2738 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2739 -rm -f $(DEST_MAN)/xxd.1 2740 -rm -f $(DEST_MAN_DA)/xxd.1 $(DEST_MAN_DA_I)/xxd.1 $(DEST_MAN_DA_U)/xxd.1 2741 -rm -f $(DEST_MAN_DE)/xxd.1 $(DEST_MAN_DE_I)/xxd.1 $(DEST_MAN_DE_U)/xxd.1 2742 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2743 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2744 -rm -f $(DEST_MAN_JA_U)/xxd.1 2745 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2746 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2747 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2748 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2749 -rm -f $(SYS_RGB_FILE) 2750 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2751 -rm -f $(SYS_BUGR_FILE) $(VIM_DEFAULTS_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2752 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2753 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2754 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2755 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2756 -rm -f $(SYS_OPTWIN_FILE) 2757 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2758 -rm -rf $(DEST_COL)/tools 2759 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2760 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2761 -rm -rf $(DEST_MACRO) 2762 -rm -rf $(DEST_PACK) 2763 -rm -rf $(DEST_TUTOR) 2764 -rm -rf $(DEST_SPELL) 2765 -rm -rf $(DEST_TOOLS) 2766 -rm -rf $(DEST_LANG) 2767 -rm -rf $(DEST_KMAP) 2768 -rm -rf $(DEST_COMP) 2769 -rm -f $(DEST_PRINT)/*.ps 2770 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2771 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt $(DEST_FTP)/logtalk.dict 2772 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt 2773 -rm -f $(DEST_AUTO)/dist/*.vim $(DEST_AUTO)/xml/*.vim 2774 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2775 -rmdir $(DEST_FTP) $(DEST_AUTO)/dist $(DEST_AUTO)/xml $(DEST_AUTO) 2776 -rmdir $(DEST_PLUG) $(DEST_RT) 2777# This will fail when other Vim versions are installed, no worries. 2778 -rmdir $(DEST_VIM) 2779 2780# Clean up all the files that have been produced, except configure's. 2781# We support common typing mistakes for Juergen! :-) 2782clean celan: testclean 2783 -rm -f *.o core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2784 -rm -rf objects 2785 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c auto/gui_gtk_gresources.c auto/gui_gtk_gresources.h 2786 -rm -f conftest* *~ auto/link.sed 2787 -rm -f testdir/opt_test.vim 2788 -rm -f $(UNITTEST_TARGETS) 2789 -rm -f runtime pixmaps 2790 -rm -rf $(APPDIR) 2791 -rm -rf mzscheme_base.c 2792 if test -d $(PODIR); then \ 2793 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2794 fi 2795 2796# Make a shadow directory for compilation on another system or with different 2797# features. 2798SHADOWDIR = shadow 2799 2800shadow: runtime pixmaps 2801 $(MKDIR_P) $(SHADOWDIR) 2802 cd $(SHADOWDIR); ln -s ../*.[chm] ../*.in ../*.sh ../*.xs ../*.xbm ../gui_gtk_res.xml ../toolcheck ../proto ../libvterm ../vimtutor ../gvimtutor ../install-sh ../Make_all.mak . 2803 mkdir $(SHADOWDIR)/auto 2804 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2805 $(MKDIR_P) $(SHADOWDIR)/po 2806 cd $(SHADOWDIR)/po; ln -s ../../po/*.po ../../po/*.mak ../../po/*.vim ../../po/*.in ../../po/Makefile ../../po/*.c . 2807 cd $(SHADOWDIR); rm -f auto/link.sed 2808 cp Makefile configure $(SHADOWDIR) 2809 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2810 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2811 cp config.mk.dist $(SHADOWDIR) 2812 $(MKDIR_P) $(SHADOWDIR)/xxd 2813 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2814 $(MKDIR_P) $(SHADOWDIR)/xdiff 2815 cd $(SHADOWDIR)/xdiff; ln -s ../../xdiff/*.[ch] . 2816 if test -d $(RSRC_DIR); then \ 2817 cd $(SHADOWDIR); \ 2818 ln -s ../infplist.xml .; \ 2819 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2820 fi 2821 $(MKDIR_P) $(SHADOWDIR)/testdir 2822 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2823 ../../testdir/Make_all.mak \ 2824 ../../testdir/README.txt \ 2825 ../../testdir/*.in \ 2826 ../../testdir/*.vim \ 2827 ../../testdir/*.py \ 2828 ../../testdir/python* \ 2829 ../../testdir/pyxfile \ 2830 ../../testdir/sautest \ 2831 ../../testdir/samples \ 2832 ../../testdir/dumps \ 2833 ../../testdir/test83-tags? \ 2834 ../../testdir/*.ok . 2835 2836# Link needed for doing "make install" in a shadow directory. 2837runtime: 2838 -ln -s ../runtime . 2839 2840# Link needed for doing "make" using GTK in a shadow directory. 2841pixmaps: 2842 -ln -s ../pixmaps . 2843 2844# Update the synmenu.vim file with the latest Syntax menu. 2845# This is only needed when runtime/makemenu.vim was changed. 2846menu: ./vim ../runtime/makemenu.vim 2847 ./vim -u ../runtime/makemenu.vim 2848 2849# Start configure from scratch 2850scrub scratch: 2851 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2852 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2853 touch auto/config.h 2854 cp config.mk.dist auto/config.mk 2855 2856distclean: clean scratch 2857 -rm -f tags 2858 2859dist: distclean 2860 @echo 2861 @echo Making the distribution has to be done in the top directory 2862 2863mdepend: 2864 -@rm -f Makefile~ 2865 cp Makefile Makefile~ 2866 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2867 @for i in $(ALL_SRC) ; do \ 2868 echo "$$i" ; \ 2869 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2870 $(CPP) $$i |\ 2871 grep '^# .*"\./.*\.h"' |\ 2872 sort -t'"' -u +1 -2 |\ 2873 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2874 ` >> tmp_make ; \ 2875 done 2876 mv tmp_make Makefile 2877 2878depend: 2879 -@rm -f Makefile~ 2880 cp Makefile Makefile~ 2881 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2882 -for i in $(ALL_SRC); do echo $$i; \ 2883 $(CPP_DEPEND) $$i | \ 2884 sed -e 's+^\([^ ]*\.o\)+objects/\1+' -e 's+xdiff/\.\./++g' >> tmp_make; done 2885 mv tmp_make Makefile 2886 2887# Run lint. Clean up the *.ln files that are sometimes left behind. 2888lint: 2889 $(LINT) $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2890 -rm -f *.ln 2891 2892# Check dosinst.c with lint. 2893lintinstall: 2894 $(LINT) $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2895 -rm -f dosinst.ln 2896 2897########################################################################### 2898 2899.c.o: 2900 $(CCC) $< 2901 2902auto/if_perl.c: if_perl.xs 2903 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2904 $(PERL) $(PERL_XSUBPP) -prototypes -typemap \ 2905 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2906 2907auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2908 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2909 2910auto/pathdef.c: Makefile auto/config.mk 2911 -@echo creating $@ 2912 -@echo '/* pathdef.c */' > $@ 2913 -@echo '/* This file is automatically created by Makefile' >> $@ 2914 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2915 -@echo '#include "vim.h"' >> $@ 2916 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2917 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2918 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2919 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2920 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2921 -@if test -n "$(COMPILEDBY)"; then \ 2922 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2923 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2924 -@echo '";' >> $@ 2925 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2926 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2927 -@echo '";' >> $@ 2928 -@sh $(srcdir)/pathdef.sh 2929 2930GUI_GTK_RES_INPUTS = \ 2931 ../pixmaps/stock_vim_build_tags.png \ 2932 ../pixmaps/stock_vim_find_help.png \ 2933 ../pixmaps/stock_vim_save_all.png \ 2934 ../pixmaps/stock_vim_session_load.png \ 2935 ../pixmaps/stock_vim_session_new.png \ 2936 ../pixmaps/stock_vim_session_save.png \ 2937 ../pixmaps/stock_vim_shell.png \ 2938 ../pixmaps/stock_vim_window_maximize.png \ 2939 ../pixmaps/stock_vim_window_maximize_width.png \ 2940 ../pixmaps/stock_vim_window_minimize.png \ 2941 ../pixmaps/stock_vim_window_minimize_width.png \ 2942 ../pixmaps/stock_vim_window_split.png \ 2943 ../pixmaps/stock_vim_window_split_vertical.png 2944 2945auto/gui_gtk_gresources.c: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2946 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml 2947auto/gui_gtk_gresources.h: gui_gtk_res.xml $(GUI_GTK_RES_INPUTS) 2948 if test -z "$(GLIB_COMPILE_RESOURCES)"; then touch $@; else \ 2949 $(GLIB_COMPILE_RESOURCES) --target=$@ --sourcedir=../pixmaps --generate --c-name=gui_gtk --manual-register gui_gtk_res.xml; \ 2950 fi 2951 2952# All the object files are put in the "objects" directory. Since not all make 2953# commands understand putting object files in another directory, it must be 2954# specified for each file separately. 2955 2956objects: objects/.dirstamp 2957 2958objects/.dirstamp: 2959 $(MKDIR_P) objects 2960 touch objects/.dirstamp 2961 2962# All object files depend on the objects directory, so that parallel make 2963# works. Can't depend on the directory itself, its timestamp changes all the 2964# time. 2965$(ALL_OBJ): objects/.dirstamp 2966 2967objects/arabic.o: arabic.c 2968 $(CCC) -o $@ arabic.c 2969 2970objects/autocmd.o: autocmd.c 2971 $(CCC) -o $@ autocmd.c 2972 2973objects/blob.o: blob.c 2974 $(CCC) -o $@ blob.c 2975 2976objects/blowfish.o: blowfish.c 2977 $(CCC) -o $@ blowfish.c 2978 2979objects/buffer.o: buffer.c 2980 $(CCC) -o $@ buffer.c 2981 2982objects/change.o: change.c 2983 $(CCC) -o $@ change.c 2984 2985objects/charset.o: charset.c 2986 $(CCC) -o $@ charset.c 2987 2988objects/crypt.o: crypt.c 2989 $(CCC) -o $@ crypt.c 2990 2991objects/crypt_zip.o: crypt_zip.c 2992 $(CCC) -o $@ crypt_zip.c 2993 2994objects/debugger.o: debugger.c 2995 $(CCC) -o $@ debugger.c 2996 2997objects/dict.o: dict.c 2998 $(CCC) -o $@ dict.c 2999 3000objects/diff.o: diff.c $(XDIFF_INCL) 3001 $(CCC) -o $@ diff.c 3002 3003objects/digraph.o: digraph.c 3004 $(CCC) -o $@ digraph.c 3005 3006objects/edit.o: edit.c 3007 $(CCC) -o $@ edit.c 3008 3009objects/eval.o: eval.c 3010 $(CCC) -o $@ eval.c 3011 3012objects/evalfunc.o: evalfunc.c 3013 $(CCC) -o $@ evalfunc.c 3014 3015objects/ex_cmds.o: ex_cmds.c 3016 $(CCC) -o $@ ex_cmds.c 3017 3018objects/ex_cmds2.o: ex_cmds2.c 3019 $(CCC) -o $@ ex_cmds2.c 3020 3021objects/ex_docmd.o: ex_docmd.c 3022 $(CCC) -o $@ ex_docmd.c 3023 3024objects/ex_eval.o: ex_eval.c 3025 $(CCC) -o $@ ex_eval.c 3026 3027objects/ex_getln.o: ex_getln.c 3028 $(CCC) -o $@ ex_getln.c 3029 3030objects/fileio.o: fileio.c 3031 $(CCC) -o $@ fileio.c 3032 3033objects/findfile.o: findfile.c 3034 $(CCC) -o $@ findfile.c 3035 3036objects/fold.o: fold.c 3037 $(CCC) -o $@ fold.c 3038 3039objects/getchar.o: getchar.c 3040 $(CCC) -o $@ getchar.c 3041 3042objects/hardcopy.o: hardcopy.c 3043 $(CCC) -o $@ hardcopy.c 3044 3045objects/hashtab.o: hashtab.c 3046 $(CCC) -o $@ hashtab.c 3047 3048objects/gui.o: gui.c 3049 $(CCC) -o $@ gui.c 3050 3051objects/gui_at_fs.o: gui_at_fs.c 3052 $(CCC) -o $@ gui_at_fs.c 3053 3054objects/gui_at_sb.o: gui_at_sb.c 3055 $(CCC) -o $@ gui_at_sb.c 3056 3057objects/gui_athena.o: gui_athena.c 3058 $(CCC) -o $@ gui_athena.c 3059 3060objects/beval.o: beval.c 3061 $(CCC) -o $@ beval.c 3062 3063objects/gui_beval.o: gui_beval.c 3064 $(CCC) -o $@ gui_beval.c 3065 3066objects/gui_gtk.o: gui_gtk.c 3067 $(CCC) -o $@ gui_gtk.c 3068 3069objects/gui_gtk_f.o: gui_gtk_f.c 3070 $(CCC) -o $@ gui_gtk_f.c 3071 3072objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3073 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/gui_gtk_gresources.c 3074 3075objects/gui_gtk_x11.o: gui_gtk_x11.c 3076 $(CCC) -o $@ gui_gtk_x11.c 3077 3078objects/gui_motif.o: gui_motif.c 3079 $(CCC) -o $@ gui_motif.c 3080 3081objects/gui_xmdlg.o: gui_xmdlg.c 3082 $(CCC) -o $@ gui_xmdlg.c 3083 3084objects/gui_xmebw.o: gui_xmebw.c 3085 $(CCC) -o $@ gui_xmebw.c 3086 3087objects/gui_x11.o: gui_x11.c 3088 $(CCC) -o $@ gui_x11.c 3089 3090objects/gui_photon.o: gui_photon.c 3091 $(CCC) -o $@ gui_photon.c 3092 3093objects/gui_mac.o: gui_mac.c 3094 $(CCC) -o $@ gui_mac.c 3095 3096objects/hangulin.o: hangulin.c 3097 $(CCC) -o $@ hangulin.c 3098 3099objects/if_cscope.o: if_cscope.c 3100 $(CCC) -o $@ if_cscope.c 3101 3102objects/if_xcmdsrv.o: if_xcmdsrv.c 3103 $(CCC) -o $@ if_xcmdsrv.c 3104 3105objects/if_lua.o: if_lua.c 3106 $(CCC_NF) $(LUA_CFLAGS) $(ALL_CFLAGS) -o $@ if_lua.c 3107 3108objects/if_mzsch.o: if_mzsch.c $(MZSCHEME_EXTRA) 3109 $(CCC) -o $@ $(MZSCHEME_CFLAGS_EXTRA) if_mzsch.c 3110 3111mzscheme_base.c: 3112 $(MZSCHEME_MZC) --c-mods mzscheme_base.c ++lib scheme/base 3113 3114objects/if_perl.o: auto/if_perl.c 3115 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ auto/if_perl.c 3116 3117objects/if_perlsfio.o: if_perlsfio.c 3118 $(CCC_NF) $(PERL_CFLAGS) $(ALL_CFLAGS) -o $@ if_perlsfio.c 3119 3120objects/if_python.o: if_python.c if_py_both.h 3121 $(CCC_NF) $(PYTHON_CFLAGS) $(PYTHON_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python.c 3122 3123objects/if_python3.o: if_python3.c if_py_both.h 3124 $(CCC_NF) $(PYTHON3_CFLAGS) $(PYTHON3_CFLAGS_EXTRA) $(ALL_CFLAGS) -o $@ if_python3.c 3125 3126objects/if_ruby.o: if_ruby.c 3127 $(CCC_NF) $(RUBY_CFLAGS) $(ALL_CFLAGS) -o $@ if_ruby.c 3128 3129objects/if_tcl.o: if_tcl.c 3130 $(CCC_NF) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ if_tcl.c 3131 3132objects/indent.o: indent.c 3133 $(CCC) -o $@ indent.c 3134 3135objects/insexpand.o: insexpand.c 3136 $(CCC) -o $@ insexpand.c 3137 3138objects/json.o: json.c 3139 $(CCC) -o $@ json.c 3140 3141objects/json_test.o: json_test.c 3142 $(CCC) -o $@ json_test.c 3143 3144objects/kword_test.o: kword_test.c 3145 $(CCC) -o $@ kword_test.c 3146 3147objects/list.o: list.c 3148 $(CCC) -o $@ list.c 3149 3150objects/main.o: main.c 3151 $(CCC) -o $@ main.c 3152 3153objects/mark.o: mark.c 3154 $(CCC) -o $@ mark.c 3155 3156objects/memfile.o: memfile.c 3157 $(CCC) -o $@ memfile.c 3158 3159objects/memfile_test.o: memfile_test.c 3160 $(CCC) -o $@ memfile_test.c 3161 3162objects/memline.o: memline.c 3163 $(CCC) -o $@ memline.c 3164 3165objects/menu.o: menu.c 3166 $(CCC) -o $@ menu.c 3167 3168objects/message.o: message.c 3169 $(CCC) -o $@ message.c 3170 3171objects/message_test.o: message_test.c 3172 $(CCC) -o $@ message_test.c 3173 3174objects/misc1.o: misc1.c 3175 $(CCC) -o $@ misc1.c 3176 3177objects/misc2.o: misc2.c 3178 $(CCC) -o $@ misc2.c 3179 3180objects/move.o: move.c 3181 $(CCC) -o $@ move.c 3182 3183objects/mbyte.o: mbyte.c 3184 $(CCC) -o $@ mbyte.c 3185 3186objects/normal.o: normal.c 3187 $(CCC) -o $@ normal.c 3188 3189objects/ops.o: ops.c 3190 $(CCC) -o $@ ops.c 3191 3192objects/option.o: option.c 3193 $(CCC_NF) $(LUA_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(PYTHON3_CFLAGS) $(RUBY_CFLAGS) $(TCL_CFLAGS) $(ALL_CFLAGS) -o $@ option.c 3194 3195objects/os_beos.o: os_beos.c 3196 $(CCC) -o $@ os_beos.c 3197 3198objects/os_qnx.o: os_qnx.c 3199 $(CCC) -o $@ os_qnx.c 3200 3201objects/os_macosx.o: os_macosx.m 3202 $(CCC) -o $@ os_macosx.m 3203 3204objects/os_mac_conv.o: os_mac_conv.c 3205 $(CCC) -o $@ os_mac_conv.c 3206 3207objects/os_unix.o: os_unix.c 3208 $(CCC) -o $@ os_unix.c 3209 3210objects/os_mswin.o: os_mswin.c 3211 $(CCC) -o $@ os_mswin.c 3212 3213objects/winclip.o: winclip.c 3214 $(CCC) -o $@ winclip.c 3215 3216objects/pathdef.o: auto/pathdef.c 3217 $(CCC) -o $@ auto/pathdef.c 3218 3219objects/popupmnu.o: popupmnu.c 3220 $(CCC) -o $@ popupmnu.c 3221 3222objects/popupwin.o: popupwin.c 3223 $(CCC) -o $@ popupwin.c 3224 3225objects/pty.o: pty.c 3226 $(CCC) -o $@ pty.c 3227 3228objects/quickfix.o: quickfix.c 3229 $(CCC) -o $@ quickfix.c 3230 3231objects/regexp.o: regexp.c regexp_nfa.c 3232 $(CCC) -o $@ regexp.c 3233 3234objects/screen.o: screen.c 3235 $(CCC) -o $@ screen.c 3236 3237objects/search.o: search.c 3238 $(CCC) -o $@ search.c 3239 3240objects/sha256.o: sha256.c 3241 $(CCC) -o $@ sha256.c 3242 3243objects/sign.o: sign.c 3244 $(CCC) -o $@ sign.c 3245 3246objects/sound.o: sound.c 3247 $(CCC) -o $@ sound.c 3248 3249objects/spell.o: spell.c 3250 $(CCC) -o $@ spell.c 3251 3252objects/spellfile.o: spellfile.c 3253 $(CCC) -o $@ spellfile.c 3254 3255objects/syntax.o: syntax.c 3256 $(CCC) -o $@ syntax.c 3257 3258objects/tag.o: tag.c 3259 $(CCC) -o $@ tag.c 3260 3261objects/term.o: term.c 3262 $(CCC) -o $@ term.c 3263 3264objects/terminal.o: terminal.c $(TERM_DEPS) 3265 $(CCC) -o $@ terminal.c 3266 3267objects/textprop.o: textprop.c 3268 $(CCC) -o $@ textprop.c 3269 3270objects/ui.o: ui.c 3271 $(CCC) -o $@ ui.c 3272 3273objects/undo.o: undo.c 3274 $(CCC) -o $@ undo.c 3275 3276objects/usercmd.o: usercmd.c 3277 $(CCC) -o $@ usercmd.c 3278 3279objects/userfunc.o: userfunc.c 3280 $(CCC) -o $@ userfunc.c 3281 3282objects/window.o: window.c 3283 $(CCC) -o $@ window.c 3284 3285objects/netbeans.o: netbeans.c 3286 $(CCC) -o $@ netbeans.c 3287 3288objects/channel.o: channel.c 3289 $(CCC) -o $@ channel.c 3290 3291Makefile: 3292 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 3293 3294CCCTERM = $(CCC_NF) $(VTERM_CFLAGS) $(ALL_CFLAGS) -DINLINE="" \ 3295 -DVSNPRINTF=vim_vsnprintf \ 3296 -DIS_COMBINING_FUNCTION=utf_iscomposing_uint \ 3297 -DWCWIDTH_FUNCTION=utf_uint2cells 3298 3299objects/encoding.o: libvterm/src/encoding.c $(TERM_DEPS) 3300 $(CCCTERM) -o $@ libvterm/src/encoding.c 3301 3302objects/keyboard.o: libvterm/src/keyboard.c $(TERM_DEPS) 3303 $(CCCTERM) -o $@ libvterm/src/keyboard.c 3304 3305objects/mouse.o: libvterm/src/mouse.c $(TERM_DEPS) 3306 $(CCCTERM) -o $@ libvterm/src/mouse.c 3307 3308objects/parser.o: libvterm/src/parser.c $(TERM_DEPS) 3309 $(CCCTERM) -o $@ libvterm/src/parser.c 3310 3311objects/pen.o: libvterm/src/pen.c $(TERM_DEPS) 3312 $(CCCTERM) -o $@ libvterm/src/pen.c 3313 3314objects/termscreen.o: libvterm/src/termscreen.c $(TERM_DEPS) 3315 $(CCCTERM) -o $@ libvterm/src/termscreen.c 3316 3317objects/state.o: libvterm/src/state.c $(TERM_DEPS) 3318 $(CCCTERM) -o $@ libvterm/src/state.c 3319 3320objects/unicode.o: libvterm/src/unicode.c $(TERM_DEPS) 3321 $(CCCTERM) -o $@ libvterm/src/unicode.c 3322 3323objects/vterm.o: libvterm/src/vterm.c $(TERM_DEPS) 3324 $(CCCTERM) -o $@ libvterm/src/vterm.c 3325 3326CCCDIFF = $(CCC_NF) $(ALL_CFLAGS) 3327 3328objects/xdiffi.o: xdiff/xdiffi.c $(XDIFF_INCL) 3329 $(CCCDIFF) -o $@ xdiff/xdiffi.c 3330 3331objects/xprepare.o: xdiff/xprepare.c $(XDIFF_INCL) 3332 $(CCCDIFF) -o $@ xdiff/xprepare.c 3333 3334objects/xutils.o: xdiff/xutils.c $(XDIFF_INCL) 3335 $(CCCDIFF) -o $@ xdiff/xutils.c 3336 3337objects/xemit.o: xdiff/xemit.c $(XDIFF_INCL) 3338 $(CCCDIFF) -o $@ xdiff/xemit.c 3339 3340objects/xhistogram.o: xdiff/xhistogram.c $(XDIFF_INCL) 3341 $(CCCDIFF) -o $@ xdiff/xhistogram.c 3342 3343objects/xpatience.o: xdiff/xpatience.c $(XDIFF_INCL) 3344 $(CCCDIFF) -o $@ xdiff/xpatience.c 3345 3346 3347############################################################################### 3348### MacOS X installation 3349### 3350### This installs a runnable Vim.app in $(prefix) 3351 3352REZ = /Developer/Tools/Rez 3353RESDIR = $(APPDIR)/Contents/Resources 3354VERSION = $(VIMMAJOR).$(VIMMINOR) 3355 3356### Common flags 3357M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 3358 -DAPP_VER=$(VERSION) 3359 3360install_macosx: gui_bundle 3361# Remove the link to the runtime dir, don't want to copy all of that. 3362 -rm $(RESDIR)/vim/runtime 3363 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 3364# Generate the help tags file now, it won't work with "make installruntime". 3365 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 3366# Install the runtime files. Recursive! 3367 $(MKDIR_P) $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3368 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 3369 VIMEXE=$$srcdir/$(VIMTARGET) \ 3370 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3371 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 3372 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 3373 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 3374 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 3375# Put the link back. 3376 ln -s `pwd`/../runtime $(RESDIR)/vim 3377# Copy rgb.txt, Mac doesn't always have X11 3378 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 3379# TODO: Create the vimtutor and/or gvimtutor application. 3380 3381gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 3382 bundle-language 3383 3384$(RESDIR): 3385 $(MKDIR_P) $@ 3386 3387bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 3388# Make a link to the runtime directory, so that we can try out the executable 3389# without installing it. 3390 $(MKDIR_P) $(RESDIR)/vim 3391 -ln -s `pwd`/../runtime $(RESDIR)/vim 3392 3393bundle-executable: $(VIMTARGET) 3394 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3395 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 3396 3397bundle-info: bundle-dir 3398 @echo "Creating PkgInfo" 3399 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 3400 @echo "Creating Info.plist" 3401 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 3402 3403bundle-resource: bundle-dir bundle-rsrc 3404 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 3405 3406### Classic resources 3407# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 3408# This file is also required for OS X Vim. 3409bundle-rsrc: os_mac.rsr.hqx 3410 @echo "Creating resource fork" 3411 python dehqx.py $< 3412 rm -f gui_mac.rsrc 3413 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 3414 3415# po/Make_osx.pl says something about generating a Mac message file 3416# for Ukrainian. Would somebody using Mac OS X in Ukrainian 3417# *really* be upset that Carbon Vim was not localised in 3418# Ukrainian? 3419# 3420#bundle-language: bundle-dir po/Make_osx.pl 3421# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 3422bundle-language: bundle-dir 3423 3424$(APPDIR)/Contents: 3425 $(MKDIR_P) $(APPDIR)/Contents/MacOS 3426 $(MKDIR_P) $(RESDIR)/English.lproj 3427 3428 3429############################################################################### 3430### (automatically generated by 'make depend') 3431### Dependencies: 3432objects/arabic.o: arabic.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3433 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3434 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3435 proto.h globals.h 3436objects/autocmd.o: autocmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3437 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3438 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3439 proto.h globals.h 3440objects/beval.o: beval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3441 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3442 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3443 proto.h globals.h 3444objects/blob.o: blob.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3445 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3446 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3447 proto.h globals.h 3448objects/blowfish.o: blowfish.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3449 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3450 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3451 proto.h globals.h 3452objects/buffer.o: buffer.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3453 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3454 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3455 proto.h globals.h version.h 3456objects/change.o: change.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3457 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3458 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3459 proto.h globals.h version.h 3460objects/charset.o: charset.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3461 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3462 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3463 proto.h globals.h 3464objects/crypt.o: crypt.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3465 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3466 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3467 proto.h globals.h 3468objects/crypt_zip.o: crypt_zip.c vim.h protodef.h auto/config.h feature.h \ 3469 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3470 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3471 proto.h globals.h 3472objects/debugger.o: debugger.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3473 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3474 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3475 proto.h globals.h 3476objects/dict.o: dict.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3477 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3478 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3479 proto.h globals.h 3480objects/diff.o: diff.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3481 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3482 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3483 proto.h globals.h xdiff/xdiff.h vim.h 3484objects/digraph.o: digraph.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3485 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3486 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3487 proto.h globals.h 3488objects/edit.o: edit.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3489 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3490 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3491 proto.h globals.h 3492objects/eval.o: eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3493 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3494 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3495 proto.h globals.h version.h 3496objects/evalfunc.o: evalfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3497 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3498 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3499 proto.h globals.h version.h 3500objects/ex_cmds.o: ex_cmds.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3501 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3502 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3503 proto.h globals.h version.h 3504objects/ex_cmds2.o: ex_cmds2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3505 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3506 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3507 proto.h globals.h version.h 3508objects/ex_docmd.o: ex_docmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3509 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3510 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3511 proto.h globals.h ex_cmdidxs.h 3512objects/ex_eval.o: ex_eval.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3513 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3514 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3515 proto.h globals.h 3516objects/ex_getln.o: ex_getln.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3517 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3518 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3519 proto.h globals.h 3520objects/fileio.o: fileio.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3521 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3522 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3523 proto.h globals.h 3524objects/findfile.o: findfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3525 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3526 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3527 proto.h globals.h 3528objects/fold.o: fold.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3529 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3530 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3531 proto.h globals.h 3532objects/getchar.o: getchar.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3533 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3534 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3535 proto.h globals.h 3536objects/hardcopy.o: hardcopy.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3537 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3538 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3539 proto.h globals.h version.h 3540objects/hashtab.o: hashtab.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3541 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3542 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3543 proto.h globals.h 3544objects/if_cscope.o: if_cscope.c vim.h protodef.h auto/config.h feature.h \ 3545 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3546 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3547 proto.h globals.h if_cscope.h 3548objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h protodef.h auto/config.h feature.h \ 3549 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3550 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3551 proto.h globals.h version.h 3552objects/indent.o: indent.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3553 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3554 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3555 proto.h globals.h 3556objects/insexpand.o: insexpand.c vim.h protodef.h auto/config.h feature.h \ 3557 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3558 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3559 proto.h globals.h 3560objects/json.o: json.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3561 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3562 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3563 proto.h globals.h 3564objects/list.o: list.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3565 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3566 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3567 proto.h globals.h 3568objects/main.o: main.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3569 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3570 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3571 proto.h globals.h 3572objects/mark.o: mark.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3573 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3574 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3575 proto.h globals.h 3576objects/memfile.o: memfile.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3577 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3578 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3579 proto.h globals.h 3580objects/memline.o: memline.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3581 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3582 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3583 proto.h globals.h 3584objects/menu.o: menu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3585 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3586 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3587 proto.h globals.h 3588objects/message.o: message.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3589 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3590 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3591 proto.h globals.h 3592objects/misc1.o: misc1.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3593 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3594 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3595 proto.h globals.h version.h 3596objects/misc2.o: misc2.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3597 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3598 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3599 proto.h globals.h 3600objects/move.o: move.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3601 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3602 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3603 proto.h globals.h 3604objects/mbyte.o: mbyte.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3605 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3606 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3607 proto.h globals.h 3608objects/normal.o: normal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3609 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3610 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3611 proto.h globals.h 3612objects/ops.o: ops.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3613 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3614 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3615 proto.h globals.h 3616objects/option.o: option.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3617 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3618 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3619 proto.h globals.h 3620objects/os_unix.o: os_unix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3621 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3622 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3623 proto.h globals.h os_unixx.h 3624objects/pathdef.o: auto/pathdef.c vim.h protodef.h auto/config.h feature.h \ 3625 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3626 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3627 proto.h globals.h 3628objects/popupmnu.o: popupmnu.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3629 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3630 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3631 proto.h globals.h 3632objects/popupwin.o: popupwin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3633 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3634 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3635 proto.h globals.h 3636objects/pty.o: pty.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3637 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3638 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3639 proto.h globals.h 3640objects/quickfix.o: quickfix.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3641 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3642 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3643 proto.h globals.h 3644objects/regexp.o: regexp.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3645 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3646 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3647 proto.h globals.h regexp_nfa.c 3648objects/screen.o: screen.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3649 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3650 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3651 proto.h globals.h 3652objects/search.o: search.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3653 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3654 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3655 proto.h globals.h 3656objects/sha256.o: sha256.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3657 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3658 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3659 proto.h globals.h 3660objects/sign.o: sign.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3661 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3662 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3663 proto.h globals.h 3664objects/sound.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3665 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3666 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3667 proto.h globals.h 3668objects/spell.o: spell.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3669 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3670 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3671 proto.h globals.h 3672objects/spellfile.o: spellfile.c vim.h protodef.h auto/config.h feature.h \ 3673 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3674 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3675 proto.h globals.h 3676objects/syntax.o: syntax.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3677 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3678 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3679 proto.h globals.h 3680objects/tag.o: tag.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3681 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3682 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3683 proto.h globals.h 3684objects/term.o: term.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3685 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3686 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3687 proto.h globals.h libvterm/include/vterm.h \ 3688 libvterm/include/vterm_keycodes.h 3689objects/terminal.o: terminal.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3690 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3691 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3692 proto.h globals.h libvterm/include/vterm.h \ 3693 libvterm/include/vterm_keycodes.h 3694objects/textprop.o: textprop.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3695 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3696 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3697 proto.h globals.h 3698objects/ui.o: ui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3699 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3700 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3701 proto.h globals.h 3702objects/undo.o: undo.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3703 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3704 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3705 proto.h globals.h 3706objects/usercmd.o: usercmd.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3707 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3708 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3709 proto.h globals.h 3710objects/userfunc.o: userfunc.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3711 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3712 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3713 proto.h globals.h 3714objects/version.o: version.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3715 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3716 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3717 proto.h globals.h version.h 3718objects/window.o: window.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3719 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3720 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3721 proto.h globals.h 3722objects/gui.o: gui.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3723 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3724 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3725 proto.h globals.h 3726objects/gui_gtk.o: gui_gtk.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3727 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3728 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3729 proto.h globals.h gui_gtk_f.h 3730objects/gui_gtk_f.o: gui_gtk_f.c vim.h protodef.h auto/config.h feature.h \ 3731 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3732 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3733 proto.h globals.h gui_gtk_f.h 3734objects/gui_motif.o: gui_motif.c vim.h protodef.h auto/config.h feature.h \ 3735 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3736 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3737 proto.h globals.h gui_xmebw.h ../pixmaps/alert.xpm ../pixmaps/error.xpm \ 3738 ../pixmaps/generic.xpm ../pixmaps/info.xpm ../pixmaps/quest.xpm \ 3739 gui_x11_pm.h ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm \ 3740 ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm \ 3741 ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm \ 3742 ../pixmaps/tb_find.xpm ../pixmaps/tb_find_next.xpm \ 3743 ../pixmaps/tb_find_prev.xpm ../pixmaps/tb_find_help.xpm \ 3744 ../pixmaps/tb_exit.xpm ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm \ 3745 ../pixmaps/tb_help.xpm ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3746 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3747 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3748 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3749 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3750 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3751 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3752 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3753 ../pixmaps/tb_minwidth.xpm 3754objects/gui_xmdlg.o: gui_xmdlg.c vim.h protodef.h auto/config.h feature.h \ 3755 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3756 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3757 proto.h globals.h 3758objects/gui_xmebw.o: gui_xmebw.c vim.h protodef.h auto/config.h feature.h \ 3759 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3760 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3761 proto.h globals.h gui_xmebwp.h gui_xmebw.h 3762objects/gui_athena.o: gui_athena.c vim.h protodef.h auto/config.h feature.h \ 3763 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3764 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3765 proto.h globals.h gui_at_sb.h gui_x11_pm.h ../pixmaps/tb_new.xpm \ 3766 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 3767 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 3768 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 3769 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 3770 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 3771 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 3772 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 3773 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 3774 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 3775 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 3776 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 3777 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 3778 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 3779 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 3780 ../pixmaps/tb_minwidth.xpm 3781objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h protodef.h auto/config.h feature.h \ 3782 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3783 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3784 proto.h globals.h auto/gui_gtk_gresources.h gui_gtk_f.h \ 3785 ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 3786objects/gui_x11.o: gui_x11.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3787 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3788 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3789 proto.h globals.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 3790 ../runtime/vim48x48.xpm 3791objects/gui_at_sb.o: gui_at_sb.c vim.h protodef.h auto/config.h feature.h \ 3792 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3793 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3794 proto.h globals.h gui_at_sb.h 3795objects/gui_at_fs.o: gui_at_fs.c vim.h protodef.h auto/config.h feature.h \ 3796 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3797 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3798 proto.h globals.h gui_at_sb.h 3799objects/json_test.o: json_test.c main.c vim.h protodef.h auto/config.h feature.h \ 3800 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3801 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3802 proto.h globals.h json.c 3803objects/kword_test.o: kword_test.c main.c vim.h protodef.h auto/config.h \ 3804 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3805 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3806 ex_cmds.h spell.h proto.h globals.h charset.c 3807objects/memfile_test.o: memfile_test.c main.c vim.h protodef.h auto/config.h \ 3808 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3809 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3810 ex_cmds.h spell.h proto.h globals.h memfile.c 3811objects/message_test.o: message_test.c main.c vim.h protodef.h auto/config.h \ 3812 feature.h os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h \ 3813 option.h beval.h proto/gui_beval.pro structs.h regexp.h gui.h alloc.h \ 3814 ex_cmds.h spell.h proto.h globals.h message.c 3815objects/hangulin.o: hangulin.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3816 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3817 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3818 proto.h globals.h 3819objects/if_lua.o: if_lua.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3820 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3821 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3822 proto.h globals.h 3823objects/if_mzsch.o: if_mzsch.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3824 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3825 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3826 proto.h globals.h if_mzsch.h 3827objects/if_perl.o: auto/if_perl.c vim.h protodef.h auto/config.h feature.h \ 3828 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3829 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3830 proto.h globals.h 3831objects/if_perlsfio.o: if_perlsfio.c vim.h protodef.h auto/config.h feature.h \ 3832 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3833 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3834 proto.h globals.h 3835objects/if_python.o: if_python.c vim.h protodef.h auto/config.h feature.h \ 3836 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3837 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3838 proto.h globals.h if_py_both.h 3839objects/if_python3.o: if_python3.c vim.h protodef.h auto/config.h feature.h \ 3840 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3841 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3842 proto.h globals.h if_py_both.h 3843objects/if_tcl.o: if_tcl.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3844 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3845 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3846 proto.h globals.h 3847objects/if_ruby.o: if_ruby.c protodef.h auto/config.h vim.h feature.h os_unix.h \ 3848 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3849 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3850 proto.h globals.h version.h 3851objects/gui_beval.o: gui_beval.c vim.h protodef.h auto/config.h feature.h \ 3852 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3853 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3854 proto.h globals.h 3855objects/netbeans.o: netbeans.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3856 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3857 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3858 proto.h globals.h version.h 3859objects/channel.o: channel.c vim.h protodef.h auto/config.h feature.h os_unix.h \ 3860 auto/osdef.h ascii.h keymap.h term.h macros.h option.h beval.h \ 3861 proto/gui_beval.pro structs.h regexp.h gui.h alloc.h ex_cmds.h spell.h \ 3862 proto.h globals.h 3863objects/gui_gtk_gresources.o: auto/gui_gtk_gresources.c 3864objects/encoding.o: libvterm/src/encoding.c libvterm/src/vterm_internal.h \ 3865 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3866 libvterm/src/encoding/DECdrawing.inc libvterm/src/encoding/uk.inc 3867objects/keyboard.o: libvterm/src/keyboard.c libvterm/src/vterm_internal.h \ 3868 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3869 libvterm/src/utf8.h 3870objects/mouse.o: libvterm/src/mouse.c libvterm/src/vterm_internal.h \ 3871 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3872 libvterm/src/utf8.h 3873objects/parser.o: libvterm/src/parser.c libvterm/src/vterm_internal.h \ 3874 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3875objects/pen.o: libvterm/src/pen.c libvterm/src/vterm_internal.h \ 3876 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3877objects/state.o: libvterm/src/state.c libvterm/src/vterm_internal.h \ 3878 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3879objects/termscreen.o: libvterm/src/termscreen.c libvterm/src/vterm_internal.h \ 3880 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3881 libvterm/src/rect.h libvterm/src/utf8.h 3882objects/unicode.o: libvterm/src/unicode.c libvterm/src/vterm_internal.h \ 3883 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h 3884objects/vterm.o: libvterm/src/vterm.c libvterm/src/vterm_internal.h \ 3885 libvterm/include/vterm.h libvterm/include/vterm_keycodes.h \ 3886 libvterm/src/utf8.h 3887objects/xdiffi.o: xdiff/xdiffi.c xdiff/xinclude.h auto/config.h \ 3888 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3889 auto/config.h feature.h os_unix.h \ 3890 auto/osdef.h ascii.h keymap.h term.h \ 3891 macros.h option.h beval.h proto/gui_beval.pro \ 3892 structs.h regexp.h gui.h alloc.h \ 3893 ex_cmds.h spell.h proto.h globals.h \ 3894 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3895 xdiff/xemit.h 3896objects/xemit.o: xdiff/xemit.c xdiff/xinclude.h auto/config.h \ 3897 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3898 auto/config.h feature.h os_unix.h \ 3899 auto/osdef.h ascii.h keymap.h term.h \ 3900 macros.h option.h beval.h proto/gui_beval.pro \ 3901 structs.h regexp.h gui.h alloc.h \ 3902 ex_cmds.h spell.h proto.h globals.h \ 3903 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3904 xdiff/xemit.h 3905objects/xprepare.o: xdiff/xprepare.c xdiff/xinclude.h auto/config.h \ 3906 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3907 auto/config.h feature.h os_unix.h \ 3908 auto/osdef.h ascii.h keymap.h term.h \ 3909 macros.h option.h beval.h proto/gui_beval.pro \ 3910 structs.h regexp.h gui.h alloc.h \ 3911 ex_cmds.h spell.h proto.h globals.h \ 3912 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3913 xdiff/xemit.h 3914objects/xutils.o: xdiff/xutils.c xdiff/xinclude.h auto/config.h \ 3915 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3916 auto/config.h feature.h os_unix.h \ 3917 auto/osdef.h ascii.h keymap.h term.h \ 3918 macros.h option.h beval.h proto/gui_beval.pro \ 3919 structs.h regexp.h gui.h alloc.h \ 3920 ex_cmds.h spell.h proto.h globals.h \ 3921 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3922 xdiff/xemit.h 3923objects/xhistogram.o: xdiff/xhistogram.c xdiff/xinclude.h auto/config.h \ 3924 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3925 auto/config.h feature.h os_unix.h \ 3926 auto/osdef.h ascii.h keymap.h term.h \ 3927 macros.h option.h beval.h proto/gui_beval.pro \ 3928 structs.h regexp.h gui.h alloc.h \ 3929 ex_cmds.h spell.h proto.h globals.h \ 3930 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3931 xdiff/xemit.h 3932objects/xpatience.o: xdiff/xpatience.c xdiff/xinclude.h auto/config.h \ 3933 xdiff/xmacros.h xdiff/xdiff.h vim.h protodef.h \ 3934 auto/config.h feature.h os_unix.h \ 3935 auto/osdef.h ascii.h keymap.h term.h \ 3936 macros.h option.h beval.h proto/gui_beval.pro \ 3937 structs.h regexp.h gui.h alloc.h \ 3938 ex_cmds.h spell.h proto.h globals.h \ 3939 xdiff/xtypes.h xdiff/xutils.h xdiff/xprepare.h xdiff/xdiffi.h \ 3940 xdiff/xemit.h 3941
