1# Makefile for Vim on Unix and Unix-like systems vim:ts=8:sw=8:tw=78 2# 3# This Makefile is loosely based on the GNU Makefile conventions found in 4# standards.info. 5# 6# Compiling Vim, summary: 7# 8# 3. make 9# 5. make install 10# 11# Compiling Vim, details: 12# 13# Edit this file for adjusting to your system. You should not need to edit any 14# other file for machine specific things! 15# The name of this file MUST be Makefile (note the uppercase 'M'). 16# 17# 1. Edit this Makefile {{{1 18# The defaults for Vim should work on most machines, but you may want to 19# uncomment some lines or make other changes below to tune it to your 20# system, compiler or preferences. Uncommenting means that the '#' in 21# the first column of a line is removed. 22# - If you want a version of Vim that is small and starts up quickly, 23# you might want to disable the GUI, X11, Perl, Python and Tcl. 24# - Uncomment the line with --disable-gui if you have Motif, GTK and/or 25# Athena but don't want to make gvim (the GUI version of Vim with nice 26# menus and scrollbars, but makes Vim bigger and startup slower). 27# - Uncomment --disable-darwin if on Mac OS X but you want to compile a 28# Unix version. 29# - Uncomment the line "CONF_OPT_X = --without-x" if you have X11 but 30# want to disable using X11 libraries. This speeds up starting Vim, 31# but the window title will not be set and the X11 selection can not 32# used. 33# - Uncomment the line "CONF_OPT_XSMP = --without-xsmp" if you have the 34# X11 Session Management Protocol (XSMP) library (libSM) but do not 35# want to use it. 36# This can speedup Vim startup but Vim loses the ability to catch the 37# user logging out from session-managers like GNOME and work 38# could be lost. 39# - Uncomment one or more of these lines to include an interface; 40# each makes Vim quite a bit bigger: 41# --enable-perlinterp for Perl interpreter 42# --enable-pythoninterp for Python interpreter 43# --enable-rubyinterp for Ruby interpreter 44# --enable-tclinterp for Tcl interpreter 45# --enable-cscope for Cscope interface 46# - Uncomment one of the lines with --with-features= to enable a set of 47# features (but not the interfaces just mentioned). 48# - Uncomment the line with --disable-acl to disable ACL support even 49# though your system supports it. 50# - Uncomment the line with --disable-gpm to disable gpm support 51# even though you have gpm libraries and includes. 52# - Uncomment the line with --disable-sysmouse to disable sysmouse 53# support even though you have /dev/sysmouse and includes. 54# - Uncomment one of the lines with CFLAGS and/or CC if you have 55# something very special or want to tune the optimizer. 56# - Search for the name of your system to see if it needs anything 57# special. 58# - A few versions of make use '.include "file"' instead of 'include 59# file'. Adjust the include line below if yours does. 60# 61# 2. Edit feature.h {{{1 62# Only if you do not agree with the default compile features, e.g.: 63# - you want Vim to be as vi compatible as it can be 64# - you want to use Emacs tags files 65# - you want right-to-left editing (Hebrew) 66# - you want 'langmap' support (Greek) 67# - you want to remove features to make Vim smaller 68# 69# 3. "make" {{{1 70# Will first run ./configure with the options in this file. Then it will 71# start make again on this Makefile to do the compiling. You can also do 72# this in two steps with: 73# make config 74# make 75# The configuration phase creates/overwrites auto/config.h and 76# auto/config.mk. 77# The configure script is created with "make autoconf". It can detect 78# different features of your system and act accordingly. However, it is 79# not correct for all systems. Check this: 80# - If you have X windows, but configure could not find it or reported 81# another include/library directory then you wanted to use, you have 82# to set CONF_OPT_X below. You might also check the installation of 83# xmkmf. 84# - If you have --enable-gui=motif and have Motif on your system, but 85# configure reports "checking for location of gui... <not found>", you 86# have to set GUI_INC_LOC and GUI_LIB_LOC below. 87# If you changed something, do this to run configure again: 88# make reconfig 89# 90# - If you do not trust the automatic configuration code, then inspect 91# auto/config.h and auto/config.mk, before starting the actual build 92# phase. If possible edit this Makefile, rather than auto/config.mk -- 93# especially look at the definition of VIMLOC below. Note that the 94# configure phase overwrites auto/config.mk and auto/config.h again. 95# - If you get error messages, find out what is wrong and try to correct 96# it in this Makefile. You may need to do "make reconfig" when you 97# change anything that configure uses (e.g. switching from an old C 98# compiler to an ANSI C compiler). Only when auto/configure does 99# something wrong you may need to change one of the other files. If 100# you find a clean way to fix the problem, consider sending a note to 101# the author of autoconf ([email protected]) or Vim 102# ([email protected]). Don't bother to do that when you made a hack 103# solution for a non-standard system. 104# 105# 4. "make test" {{{1 106# This is optional. This will run Vim scripts on a number of test 107# files, and compare the produced output with the expected output. 108# If all is well, you will get the "ALL DONE" message in the end. See 109# below (search for "/^test"). 110# 111# 5. "make install" {{{1 112# If the new Vim seems to be working OK you can install it and the 113# documentation in the appropriate location. The default is 114# "/usr/local". Change "prefix" below to change the location. 115# "auto/pathdef.c" will be compiled again after changing this to make 116# the executable know where the help files are located. 117# Note that any existing executable is removed or overwritten. If you 118# want to keep it you will have to make a backup copy first. 119# The runtime files are in a different directory for each version. You 120# might want to delete an older version. 121# If you don't want to install everything, there are other targets: 122# make installvim only installs Vim, not the tools 123# make installvimbin only installs the Vim executable 124# make installruntime installs most of the runtime files 125# make installrtbase only installs the Vim help and 126# runtime files 127# make installlinks only installs the Vim binary links 128# make installmanlinks only installs the Vim manpage links 129# make installmacros only installs the Vim macros 130# make installtutorbin only installs the Vim tutor program 131# make installtutor only installs the Vim tutor files 132# make installspell only installs the spell files 133# make installtools only installs xxd 134# If you install Vim, not to install for real but to prepare a package 135# or RPM, set DESTDIR to the root of the tree. 136# 137# 6. Use Vim until a new version comes out. {{{1 138# 139# 7. "make uninstall_runtime" {{{1 140# Will remove the runtime files for the current version. This is safe 141# to use while another version is being used, only version-specific 142# files will be deleted. 143# To remove the runtime files of another version: 144# make uninstall_runtime VIMRTDIR=/vim54 145# If you want to delete all installed files, use: 146# make uninstall 147# Note that this will delete files that have the same name for any 148# version, thus you might need to do a "make install" soon after this. 149# Be careful not to remove a version of Vim that is still being used! 150# To find out which files and directories will be deleted, use: 151# make -n uninstall 152# }}} 153# 154### This Makefile has been successfully tested on many systems. {{{ 155### Only the ones that require special options are mentioned here. 156### Check the (*) column for remarks, listed below. 157### Later code changes may cause small problems, otherwise Vim is supposed to 158### compile and run without problems. 159 160#system: configurations: version (*) tested by: 161#------------- ------------------------ ------- - ---------- 162#AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash 163#AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn 164#AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker 165#AIX 4.2.1 cc 5.2k (C) Will Fiveash 166#AIX 4.3.3.12 xic 3.6.6 5.6 (5) David R. Favor 167#A/UX 3.1.1 gcc +X11 4.0 (6) Jim Jagielski 168#BeOS PR mwcc DR3 5.0n (T) Olaf Seibert 169#BSDI 2.1 (x86) shlicc2 gcc-2.6.3 -X11 X11R6 4.5 (1) Jos Backus 170#BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 -X11 X11R6 4.6c (1) Jos Backus 171#CX/UX 6.2 cc +X11 +GUI_Mofif 5.4 (V) Kipp E. Howard 172#DG/UX 5.4* gcc 2.5.8 GUI 5.0e (H) Jonas Schlein 173#DG/UX 5.4R4.20 gcc 2.7.2 GUI 5.0s (H) Rocky Olive 174#HP-UX (most) c89 cc 5.1 (2) Bram Moolenaar 175#HP-UX_9.04 cc +X11 +Motif 5.0 (2) Carton Lao 176#Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor 177#Irix 6.4 cc ? 5.0m (S) Rick Sayre 178#Irix 6.5 cc ? 6.0 (S) David Harrison 179#Irix 64 bit 4.5 (K) Jon Wright 180#Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman 181#Linux 2.0.31 gcc +X11 +GUI Athena 5.0w (U) Darren Hiebert 182#LynxOS 3.0.1 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 183#LynxOS 3.1.0 2.9-gnupro-98r2 +X11 +GUI Athena 5.7.1(O) Lorenz Hahn 184#NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena4.6b (Q) Lennart Schultz 185#NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert 186#QNX 4.2 wcc386-10.6 -X11 4.2 (D) G.F. Desrochers 187#QNX 4.23 Watcom -X11 4.2 (F) John Oleynick 188#SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum 189#SCO Open Server 5 gcc 2.7.2.3 +X11 +GUI Motif 5.3 (A) Glauber Ribeiro 190#SINIX-N 5.43 RM400 R4000 cc +X11 +GUI 5.0l (I) Martin Furter 191#SINIX-Z 5.42 i386 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 192#SINIX-Y 5.43 RM600 R4000 gcc 2.7.2.3 +X11 +GUI Motif 5.1 (I) Joachim Fehn 193#Reliant/SINIX 5.44 cc +X11 +GUI 5.5a (I) B. Pruemmer 194#SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman 195#Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber 196#Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon 197#Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large 198#Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann 199#Solaris 2.5 gcc 2.5.6 +X11 Motif 5.0m (R) Ant. Colombo 200#Solaris 2.6 gcc 2.8.1 ncursus 5.3 (G) Larry W. Virden 201#Solaris with -lthread 5.5 (W) K. Nagano 202#Solaris gcc (b) Riccardo 203#SunOS 4.1.x +X11 -GUI 5.1b (J) Bram Moolenaar 204#SunOS 4.1.3_U1 (sun4c) gcc +X11 +GUI Athena 5.0w (J) Darren Hiebert 205#SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena4.6b (P) Lennart Schultz 206#Tandem/NSK (c) Matthew Woehlke 207#Unisys 6035 cc +X11 Motif 5.3 (8) Glauber Ribeiro 208#ESIX V4.2 cc +X11 6.0 (a) Reinhard Wobst 209#Mac OS X 10.[23] gcc Carbon 6.2 (x) Bram Moolenaar 210# }}} 211 212# (*) Remarks: {{{ 213# 214# (1) Uncomment line below for shlicc2 215# (2) HPUX with compile problems or wrong digraphs, uncomment line below 216# (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. 217# And add "-lXpm" to MOTIF_LIBS2. 218# (4) For cc the optimizer must be disabled (use CFLAGS= after running 219# configure) (symptom: ":set termcap" output looks weird). 220# (5) Compiler may need extra argument, see below. 221# (6) See below for a few lines to uncomment 222# (7) See below for lines which enable the use of clcc 223# (8) Needs some EXTRA_LIBS, search for Unisys below 224# (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. 225# (A) May need EXTRA_LIBS, see below 226# (B) Can't compile GUI because there is no waitpid()... Disable GUI below. 227# (C) Force the use of curses instead of termcap, see below. 228# (D) Uncomment lines below for QNX 229# (E) You might want to use termlib instead of termcap, see below. 230# (F) See below for instructions. 231# (G) Using ncursus version 4.2 has reported to cause a crash. Use the 232# Sun cursus library instead. 233# (H) See line for EXTRA_LIBS below. 234# (I) SINIX-N 5.42 and 5.43 need some EXTRA_LIBS. Also for Reliant-Unix. 235# (J) If you get undefined symbols, see below for a solution. 236# (K) See lines to uncomment below for machines with 64 bit pointers. 237# (L) For Silicon Graphics O2 workstations remove "-lnsl" from auto/config.mk 238# (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two 239# characters instead of one). 240# (N) SCO with decmouse. 241# (O) LynxOS needs EXTRA_LIBS, see below. 242# (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. 243# (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. 244# (R) For Solaris 2.5 (or 2.5.1) with gcc > 2.5.6, uncomment line below. 245# (S) For Irix 6.x with MipsPro compiler, use -OPT:Olimit. See line below. 246# (T) See ../doc/os_beos.txt. 247# (U) Must uncomment CONF_OPT_PYTHON option below to disable Python 248# detection, since the configure script runs into an error when it 249# detects Python (probably because of the bash shell). 250# (V) See lines to uncomment below. 251# (X) Need to use the .include "auto/config.mk" line below 252# (Y) See line with c89 below 253# (Z) See lines with cc or c89 below 254# (a) See line with EXTRA_LIBS below. 255# (b) When using gcc with the Solaris linker, make sure you don't use GNU 256# strip, otherwise the binary may not run: "Cannot find ELF". 257# (c) Add -lfloss to EXTRA_LIBS, see below. 258# (x) When you get warnings for precompiled header files, run 259# "sudo fixPrecomps". Also see CONF_OPT_DARWIN below. 260# }}} 261 262 263#DO NOT CHANGE the next line, we need it for configure to find the compiler 264#instead of using the default from the "make" program. 265#Use a line further down to change the value for CC. 266CC= 267 268# Change and use these defines if configure cannot find your Motif stuff. 269# Unfortunately there is no "standard" location for Motif. {{{ 270# These defines can contain a single directory (recommended) or a list of 271# directories (for when you are working with several systems). The LAST 272# directory that exists is used. 273# When changed, run "make reconfig" next! 274#GUI_INC_LOC = -I/usr/include/Motif2.0 -I/usr/include/Motif1.2 275#GUI_LIB_LOC = -L/usr/lib/Motif2.0 -L/usr/lib/Motif1.2 276### Use these two lines for Infomagic Motif (3) 277#GUI_INC_LOC = -I/usr/X11R6/include 278#GUI_LIB_LOC = -L/usr/X11R6/lib 279# }}} 280 281######################## auto/config.mk ######################## {{{1 282# At this position auto/config.mk is included. When starting from the 283# distribution it is almost empty. After running auto/configure it contains 284# settings that have been discovered for your system. Settings below this 285# include override settings in auto/config.mk! 286 287# Note: if auto/config.mk is lost somehow (e.g., because configure was 288# interrupted), create an empty auto/config.mk file and do "make config". 289 290# (X) How to include auto/config.mk depends on the version of "make" you have, 291# if the current choice doesn't work, try the other one. 292 293include auto/config.mk 294#.include "auto/config.mk" 295CClink = $(CC) 296 297#}}} 298 299# Include the configuration choices first, so we can override everything 300# below. As shipped, this file contains a target that causes to run 301# configure. Once configure was run, this file contains a list of 302# make variables with predefined values instead. Thus any second invocation 303# of make, will build Vim. 304 305# CONFIGURE - configure arguments {{{1 306# You can give a lot of options to configure. 307# Change this to your desire and do 'make config' afterwards 308 309# examples (can only use one!): 310#CONF_ARGS = --exec-prefix=/usr 311#CONF_ARGS = --with-vim-name=vim7 --with-ex-name=ex7 --with-view-name=view7 312#CONF_ARGS = --with-global-runtime=/etc/vim 313 314# Use this one if you distribute a modified version of Vim. 315#CONF_ARGS = --with-modified-by="John Doe" 316 317# GUI - For creating Vim with GUI (gvim) (B) 318# Uncomment this line when you don't want to get the GUI version, although you 319# have GTK, Motif and/or Athena. Also use --without-x if you don't want X11 320# at all. 321#CONF_OPT_GUI = --disable-gui 322 323# Uncomment one of these lines if you have that GUI but don't want to use it. 324# The automatic check will use another one that can be found. 325# Gnome is disabled by default, it may cause trouble. 326#CONF_OPT_GUI = --disable-gtk-check 327#CONF_OPT_GUI = --disable-gtk2-check 328#CONF_OPT_GUI = --enable-gnome-check 329#CONF_OPT_GUI = --enable-gnome2-check 330#CONF_OPT_GUI = --disable-motif-check 331#CONF_OPT_GUI = --disable-athena-check 332#CONF_OPT_GUI = --disable-nextaw-check 333 334# Uncomment one of these lines to select a specific GUI to use. 335# When using "yes" or nothing, configure will use the first one found: GTK+, 336# Motif or Athena. 337# 338# GTK versions that are known not to work 100% are rejected. 339# Use "--disable-gtktest" to accept them anyway. 340# 341# GNOME means GTK with Gnome support. If using GTK and --enable-gnome-check 342# is used then GNOME will automatically be used if it is found. If you have 343# GNOME, but do not want to use it (e.g., want a GTK-only version), then use 344# --enable-gui=gtk or leave out --enable-gnome-check. 345# 346# If the selected GUI isn't found, the GUI is disabled automatically 347#CONF_OPT_GUI = --enable-gui=gtk 348#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest 349#CONF_OPT_GUI = --enable-gui=gtk2 350#CONF_OPT_GUI = --enable-gui=gtk2 --disable-gtktest 351#CONF_OPT_GUI = --enable-gui=gnome 352#CONF_OPT_GUI = --enable-gui=gnome2 353#CONF_OPT_GUI = --enable-gui=gnome2 --disable-gtktest 354#CONF_OPT_GUI = --enable-gui=motif 355#CONF_OPT_GUI = --enable-gui=motif --with-motif-lib="-static -lXm -shared" 356#CONF_OPT_GUI = --enable-gui=athena 357#CONF_OPT_GUI = --enable-gui=nextaw 358 359# DARWIN - detecting Mac OS X 360# Uncomment this line when you want to compile a Unix version of Vim on 361# Darwin. None of the Mac specific options or files will be used. 362#CONF_OPT_DARWIN = --disable-darwin 363 364# Select the architecture supported. Default is to build for the current 365# platform. Use "both" for a universal binary. That probably doesn't work 366# when including Perl, Python, etc. 367#CONF_OPT_DARWIN = --with-mac-arch=i386 368#CONF_OPT_DARWIN = --with-mac-arch=ppc 369#CONF_OPT_DARWIN = --with-mac-arch=both 370 371# PERL 372# Uncomment this when you want to include the Perl interface. 373# The Perl option sometimes causes problems, because it adds extra flags 374# to the command line. If you see strange flags during compilation, check in 375# auto/config.mk where they come from. If it's PERL_CFLAGS, try commenting 376# the next line. 377# When you get an error for a missing "perl.exp" file, try creating an emtpy 378# one: "touch perl.exp". 379# This requires at least "small" features, "tiny" doesn't work. 380#CONF_OPT_PERL = --enable-perlinterp 381 382# PYTHON 383# Uncomment this when you want to include the Python interface. 384# NOTE: This may cause threading to be enabled, which has side effects (such 385# as using different libraries and debugging becomes more difficult). 386# NOTE: Using this together with Perl may cause a crash in initialization. 387#CONF_OPT_PYTHON = --enable-pythoninterp 388 389# TCL 390# Uncomment this when you want to include the Tcl interface. 391#CONF_OPT_TCL = --enable-tclinterp 392#CONF_OPT_TCL = --enable-tclinterp --with-tclsh=tclsh8.4 393 394# RUBY 395# Uncomment this when you want to include the Ruby interface. 396#CONF_OPT_RUBY = --enable-rubyinterp 397 398# MZSCHEME 399# Uncomment this when you want to include the MzScheme interface. 400#CONF_OPT_MZSCHEME = --enable-mzschemeinterp 401# PLT/mrscheme/drscheme Home dir; the PLTHOME environment variable also works 402#CONF_OPT_PLTHOME = --with-plthome=/usr/local/plt 403#CONF_OPT_PLTHOME = --with-plthome=/usr/local/drscheme 404#CONF_OPT_PLTHOME = --with-plthome=/home/me/mz 405 406# CSCOPE 407# Uncomment this when you want to include the Cscope interface. 408#CONF_OPT_CSCOPE = --enable-cscope 409 410# WORKSHOP - Sun Visual Workshop interface. Only works with Motif! 411#CONF_OPT_WORKSHOP = --enable-workshop 412 413# NETBEANS - NetBeans interface. Only works with Motif, GTK, and gnome. 414# Motif version must have XPM libraries (see |workshop-xpm|). 415# Uncomment this when you do not want the netbeans interface. 416#CONF_OPT_NETBEANS = --disable-netbeans 417 418# SNIFF - Include support for SNiFF+. 419#CONF_OPT_SNIFF = --enable-sniff 420 421# MULTIBYTE - To edit multi-byte characters. 422# Uncomment this when you want to edit a multibyte language. 423# It's automatically enabled with big features or IME support. 424# Note: Compile on a machine where setlocale() actually works, otherwise the 425# configure tests may fail. 426#CONF_OPT_MULTIBYTE = --enable-multibyte 427 428# NLS - National Language Support 429# Uncomment this when you do not want to support translated messages, even 430# though configure can find support for it. 431#CONF_OPT_NLS = --disable-nls 432 433# XIM - X Input Method. Special character input support for X11 (Chinese, 434# Japanese, special symbols, etc). Also needed for dead-key support. 435# When omitted it's automatically enabled for the X-windows GUI. 436# HANGUL - Input Hangul (Korean) language using internal routines. 437# Uncomment one of these when you want to input a multibyte language. 438#CONF_OPT_INPUT = --enable-xim 439#CONF_OPT_INPUT = --disable-xim 440#CONF_OPT_INPUT = --enable-hangulinput 441 442# FONTSET - X fontset support for output of languages with many characters. 443# Uncomment this when you want to output a multibyte language. 444#CONF_OPT_OUTPUT = --enable-fontset 445 446# ACL - Uncomment this when you do not want to include ACL support, even 447# though your system does support it. E.g., when it's buggy. 448#CONF_OPT_ACL = --disable-acl 449 450# gpm - For mouse support on Linux console via gpm 451# Uncomment this when you do not want to include gpm support, even 452# though you have gpm libraries and includes. 453#CONF_OPT_GPM = --disable-gpm 454 455# sysmouse - For mouse support on FreeBSD and DragonFly console via sysmouse 456# Uncomment this when you do not want do include sysmouse support, even 457# though you have /dev/sysmouse and includes. 458#CONF_OPT_SYSMOUSE = --disable-sysmouse 459 460# FEATURES - For creating Vim with more or less features 461# Uncomment one of these lines when you want to include few to many features. 462# The default is "normal". 463#CONF_OPT_FEAT = --with-features=tiny 464#CONF_OPT_FEAT = --with-features=small 465#CONF_OPT_FEAT = --with-features=normal 466#CONF_OPT_FEAT = --with-features=big 467#CONF_OPT_FEAT = --with-features=huge 468 469# COMPILED BY - For including a specific e-mail address for ":version". 470#CONF_OPT_COMPBY = "--with-compiledby=John Doe <[email protected]>" 471 472# X WINDOWS DISABLE - For creating a plain Vim without any X11 related fancies 473# (otherwise Vim configure will try to include xterm titlebar access) 474# Also disable the GUI above, otherwise it will be included anyway. 475# When both GUI and X11 have been disabled this may save about 15% of the 476# code and make Vim startup quicker. 477#CONF_OPT_X = --without-x 478 479# X WINDOWS DIRECTORY - specify X directories 480# If configure can't find you X stuff, or if you have multiple X11 derivatives 481# installed, you may wish to specify which one to use. 482# Select nothing to let configure choose. 483# This here selects openwin (as found on sun). 484#XROOT = /usr/openwin 485#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib 486 487# X11 Session Management Protocol support 488# Vim will try to use XSMP to catch the user logging out if there are unsaved 489# files. Uncomment this line to disable that (it prevents vim trying to open 490# communications with the session manager). 491#CONF_OPT_XSMP = --disable-xsmp 492 493# You may wish to include xsmp but use exclude xsmp-interact if the logout 494# XSMP functionality does not work well with your session-manager (at time of 495# writing, this would be early GNOME-1 gnome-session: it 'freezes' other 496# applications after Vim has cancelled a logout (until Vim quits). This 497# *might* be the Vim code, but is more likely a bug in early GNOME-1. 498# This disables the dialog that asks you if you want to save files or not. 499#CONF_OPT_XSMP = --disable-xsmp-interact 500 501# COMPILER - Name of the compiler {{{1 502# The default from configure will mostly be fine, no need to change this, just 503# an example. If a compiler is defined here, configure will use it rather than 504# probing for one. It is dangerous to change this after configure was run. 505# Make will use your choice then -- but beware: Many things may change with 506# another compiler. It is wise to run 'make reconfig' to start all over 507# again. 508#CC = cc 509#CC = gcc 510 511# COMPILER FLAGS - change as you please. Either before running {{{1 512# configure or afterwards. For examples see below. 513# When using -g with some older versions of Linux you might get a 514# statically linked executable. 515# When not defined, configure will try to use -O2 -g for gcc and -O for cc. 516#CFLAGS = -g 517#CFLAGS = -O 518 519# Optimization limits - depends on the compiler. Automatic check in configure 520# doesn't work very well, because many compilers only give a warning for 521# unrecognized arguments. 522#CFLAGS = -O -OPT:Olimit=2600 523#CFLAGS = -O -Olimit 2000 524#CFLAGS = -O -FOlimit,2000 525 526# Often used for GCC: mixed optimizing, lot of optimizing, debugging 527#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 528#CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wmissing-prototypes 529#CFLAGS = -g -Wall -Wmissing-prototypes 530#CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes 531#CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes 532#CFLAGS = -g -O2 '-DSTARTUPTIME="vimstartup"' -fno-strength-reduce -Wall -Wmissing-prototypes 533 534# EFENCE - Electric-Fence malloc debugging: catches memory accesses beyond 535# allocated memory (and makes every malloc()/free() very slow). 536# Electric Fence is free (search ftp sites). 537# You may want to set the EF_PROTECT_BELOW environment variable to check the 538# other side of allocated memory. 539# On FreeBSD you might need to enlarge the number of mmaps allowed. Do this 540# as root: sysctl -w vm.max_proc_mmap=30000 541#EXTRA_LIBS = /usr/local/lib/libefence.a 542 543# PURIFY - remove the # to use the "purify" program (hoi Nia++!) 544#PURIFY = purify 545 546# NBDEBUG - debugging the netbeans interface. 547#EXTRA_DEFS = -DNBDEBUG 548 549# }}} 550 551# LINT - for running lint 552LINT_OPTIONS = -beprxzF 553 554# PROFILING - Uncomment the next two lines to do profiling with gcc and gprof. 555# Might not work with GUI or Perl. 556# For unknown reasons adding "-lc" fixes a linking problem with GCC. That's 557# probably a bug in the "-pg" implementation. 558# Need to recompile everything after changing this: "make clean" "make". 559#PROFILE_CFLAGS = -pg -g -DWE_ARE_PROFILING 560#PROFILE_LIBS = -pg 561#PROFILE_LIBS = -pg -lc 562 563# MEMORY LEAK DETECTION 564# Requires installing the ccmalloc library. 565# Configuration is in the .ccmalloc or ~/.ccmalloc file. 566# Doesn't work very well, since memory linked to from global variables 567# (in libraries) is also marked as leaked memory. 568#PROFILE_CFLAGS = -DEXITFREE 569#PROFILE_LIBS = -lccmalloc 570 571##################################################### 572### Specific systems, check if yours is listed! ### {{{ 573##################################################### 574 575### Uncomment things here only if the values chosen by configure are wrong. 576### It's better to adjust configure.in and "make autoconf", if you can! 577### Then send the required changes to configure.in to the bugs list. 578 579### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries 580### 581#CC = shlicc2 582#CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin 583 584### (2) HP-UX with a non-ANSI cc, use the c89 ANSI compiler 585### The first probably works on all systems 586### The second should work a bit better on newer systems 587### The third should work a bit better on HPUX 11.11 588### Information provided by: Richard Allen <[email protected]> 589#CC = c89 -D_HPUX_SOURCE 590#CC = c89 -O +Onolimit +ESlit -D_HPUX_SOURCE 591#CC = c89 -O +Onolimit +ESlit +e -D_HPUX_SOURCE 592 593### (2) For HP-UX: Enable the use of a different set of digraphs. Use this 594### when the default (ISO) digraphs look completely wrong. 595### After changing this do "touch digraph.c; make". 596#EXTRA_DEFS = -DHPUX_DIGRAPHS 597 598### (2) For HP-UX: 9.04 cpp default macro definition table of 128000 bytes 599### is too small to compile many routines. It produces too much defining 600### and no space errors. 601### Uncomment the following to specify a larger macro definition table. 602#CFLAGS = -Wp,-H256000 603 604### (2) For HP-UX 10.20 using the HP cc, with X11R6 and Motif 1.2, with 605### libraries in /usr/lib instead of /lib (avoiding transition links). 606### Information provided by: David Green 607#XROOT = /usr 608#CONF_OPT_X = --x-include=$(XROOT)/include/X11R6 --x-libraries=$(XROOT)/lib/X11R6 609#GUI_INC_LOC = -I/usr/include/Motif1.2 610#GUI_LIB_LOC = -L/usr/lib/Motif1.2_R6 611 612### (5) AIX 4.1.4 with cc 613#CFLAGS = -O -qmaxmem=8192 614 615### AIX with c89 (Walter Briscoe) 616#CC = c89 617#CPPFLAGS = -D_ALL_SOURCE 618 619### AIX 4.3.3.12 with xic 3.6.6 (David R. Favor) 620# needed to avoid a problem where strings.h gets included 621#CFLAGS = -qsrcmsg -O2 -qmaxmem=8192 -D__STR31__ 622 623### (W) Solaris with multi-threaded libraries (-lthread): 624### If suspending doesn't work properly, try using this line: 625#EXTRA_DEFS = -D_REENTRANT 626 627### (7) Solaris 2.4/2.5 with Centerline compiler 628#CC = clcc 629#X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib 630#CFLAGS = -O 631 632### (9) Solaris 2.x with cc (SunPro), using Athena. 633### Only required for compiling gui_at_sb.c. 634### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" 635### Use one of the lines (either Full ANSI or no ANSI at all) 636#CFLAGS = $(CFLAGS) -Xc 637#CFLAGS = $(CFLAGS) -Xs 638 639### Solaris 2.3 with X11 and specific cc 640#CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib 641 642### Solaris with /usr/ucb/cc (it is rejected by autoconf as "cc") 643#CC = /usr/ucb/cc 644#EXTRA_LIBS = -R/usr/ucblib 645 646### Solaris with Forte Developer and FEAT_SUN_WORKSHOP 647# The Xpm library is available from http://koala.ilog.fr/ftp/pub/xpm. 648#CC = cc 649#XPM_DIR = /usr/local/xpm/xpm-3.4k-solaris 650#XPM_LIB = -L$(XPM_DIR)/lib -R$(XPM_DIR)/lib -lXpm 651#XPM_IPATH = -I$(XPM_DIR)/include 652#EXTRA_LIBS = $(XPM_LIB) 653#EXTRA_IPATHS = $(XPM_IPATH) 654#EXTRA_DEFS = -xCC -DHAVE_X11_XPM_H 655 656### Solaris with workshop compilers: Vim is unstable when compiled with 657# "-fast". Use this instead. (Shea Martin) 658#CFLAGS = -x02 -xtarget=ultra 659 660### (R) for Solaris 2.5 (or 2.5.1) with gcc > 2.5.6 you might need this: 661#LDFLAGS = -lw -ldl -lXmu 662#GUI_LIB_LOC = -L/usr/local/lib 663 664### (8) Unisys 6035 (Glauber Ribeiro) 665#EXTRA_LIBS = -lnsl -lsocket -lgen 666 667### When builtin functions cause problems with gcc (for Sun 4.1.x) 668#CFLAGS = -O2 -Wall -traditional -Wno-implicit 669 670### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) 671#EXTRA_DEFS = -DDOMAIN 672#CFLAGS= -O -A systype,bsd4.3 673 674### Coherent 4.2.10 on Intel 386 platform 675#EXTRA_DEFS = -Dvoid=int 676#EXTRA_LIBS = -lterm -lsocket 677 678### SCO 3.2, with different library name for terminfo 679#EXTRA_LIBS = -ltinfo 680 681### UTS2 for Amdahl UTS 2.1.x 682#EXTRA_DEFS = -DUTS2 683#EXTRA_LIBS = -lsocket 684 685### UTS4 for Amdahl UTS 4.x 686#EXTRA_DEFS = -DUTS4 -Xa 687 688### USL for Unix Systems Laboratories (SYSV 4.2) 689#EXTRA_DEFS = -DUSL 690 691### RISCos on MIPS without X11 692#EXTRA_DEFS = -DMIPS 693 694### RISCos on MIPS with X11 695#EXTRA_LIBS = -lsun 696 697### (6) A/UX 3.1.1 with gcc (Jim Jagielski) 698#CC= gcc -D_POSIX_SOURCE 699#CFLAGS= -O2 700#EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 701 702### (A) Some versions of SCO Open Server 5 (Jan Christiaan van Winkel) 703### Also use the CONF_TERM_LIB below! 704#EXTRA_LIBS = -lgen 705 706### (D) QNX (by G.F. Desrochers) 707#CFLAGS = -g -O -mf -4 708 709### (F) QNX (by John Oleynick) 710# 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment 711# CONF_OPT_X = --without-x. 712# 2. make config 713# 3. edit auto/config.mk and remove -ldir and -ltermcap from LIBS. It doesn't 714# have -ldir (does config find it somewhere?) and -ltermcap has at 715# least one problem so I use termlib.o instead. The problem with 716# termcap is that it segfaults if you call it with the name of 717# a non-existent terminal type. 718# 4. edit auto/config.h and add #define USE_TMPNAM 719# 5. add termlib.o to OBJ 720# 6. make 721 722### (H) for Data general DG/UX 5.4.2 and 5.4R3.10 (Jonas J. Schlein) 723#EXTRA_LIBS = -lgen 724 725### (I) SINIX-N 5.42 or 5.43 RM400 R4000 (also SINIX-Y and SINIX-Z) 726#EXTRA_LIBS = -lgen -lnsl 727### For SINIX-Y this is needed for the right prototype of gettimeofday() 728#EXTRA_DEFS = -D_XPG_IV 729 730### (I) Reliant-Unix (aka SINIX) 5.44 with standard cc 731# Use both "-F O3" lines for optimization or the "-g" line for debugging 732#EXTRA_LIBS = -lgen -lsocket -lnsl -lSM -lICE 733#CFLAGS = -F O3 -DSINIXN 734#LDFLAGS = -F O3 735#CFLAGS = -g -DSINIXN 736 737### (P) SCO 3.2.42, with different termcap names for some useful keys DJB 738#EXTRA_DEFS = -DSCOKEYS -DNETTERM_MOUSE -DDEC_MOUSE -DXTERM_MOUSE -DHAVE_GETTIMEOFDAY 739#EXTRA_LIBS = -lsocket -ltermcap -lmalloc -lc_s 740 741### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) 742#GUI_INC_LOC = -I/usr/include 743#GUI_LIB_LOC = -L/usr/lib 744#EXTRA_LIBS = -lgen 745 746### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) 747#GUI_INC_LOC = -I/usr/necccs/include 748#GUI_LIB_LOC = -L/usr/necccs/lib/X11R6 749#XROOT = /usr/necccs 750#CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 751#EXTRA_LIBS = -lsocket -lgen 752 753### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) 754# Not needed for Irix 5.3, Ives Aerts reported 755#EXTRA_LIBS = -lmalloc -lc_s 756# Irix 4.0, when regexp and regcmp cannot be found when linking: 757#EXTRA_LIBS = -lmalloc -lc_s -lPW 758 759### (S) Irix 6.x (MipsPro compiler): Uses different Olimit flag: 760# Note: This newer option style is used with the MipsPro compilers ONLY if 761# you are compiling an "n32" or "64" ABI binary (use either a -n32 762# flag or a -64 flag for CFLAGS). If you explicitly use a -o32 flag, 763# then the CFLAGS option format will be the typical style (i.e. 764# -Olimit 3000). 765#CFLAGS = -OPT:Olimit=3000 -O 766 767### (S) Irix 6.5 with MipsPro C compiler. Try this as a test to see new 768# compiler features! Beware, the optimization is EXTREMELY thorough 769# and takes quite a long time. 770# Note: See the note above. Here, the -mips3 option automatically 771# enables either the "n32" or "64" ABI, depending on what machine you 772# are compiling on (n32 is explicitly enabled here, just to make sure). 773#CFLAGS = -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 774#LDFLAGS= -OPT:Olimit=3500 -O -n32 -mips3 -IPA:aggr_cprop=ON -INLINE:dfe=ON:list=ON:must=screen_char,out_char,ui_write,out_flush 775 776### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) 777### Suggested by Jon Wright <[email protected]>. 778### Tested on R8000 IRIX6.1 Power Indigo2. 779### Check /etc/compiler.defaults for your compiler settings. 780# either (for 64 bit pointers) uncomment the following line 781#GUI_LIB_LOC = -L/usr/lib64 782# then 783# 1) make config 784# 2) edit auto/config.mk and delete the -lelf entry in the LIBS line 785# 3) make 786# 787# or (for 32bit pointers) uncomment the following line 788#EXTRA_DEFS = -n32 789#GUI_LIB_LOC = -L/usr/lib32 790# then 791# 1) make config 792# 2) edit auto/config.mk, add -n32 to LDFLAGS 793# 3) make 794# 795#Alternatively: use -o32 instead of -n32. 796### 797 798### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, 799### which is found by configure, doesn't work correctly. Symptom is the 800### error message "Termcap entry too long". Uncomment the next line. 801### On AIX 4.2.1 (and other versions probably), libtermcap is reported 802### not to display properly. 803### after changing this, you need to do "make reconfig". 804#CONF_TERM_LIB = --with-tlib=curses 805 806### (E) If you want to use termlib library instead of the automatically found 807### one. After changing this, you need to do "make reconfig". 808#CONF_TERM_LIB = --with-tlib=termlib 809 810### (a) ESIX V4.2 (Reinhard Wobst) 811#EXTRA_LIBS = -lnsl -lsocket -lgen -lXIM -lXmu -lXext 812 813### (c) Tandem/NSK (Matthew Woehlke) 814#EXTRA_LIBS = -lfloss 815 816### If you want to use ncurses library instead of the automatically found one 817### after changing this, you need to do "make reconfig". 818#CONF_TERM_LIB = --with-tlib=ncurses 819 820### For GCC on MSDOS, the ".exe" suffix will be added. 821#EXEEXT = .exe 822#LNKEXT = .exe 823 824### (O) For LynxOS 2.5.0, tested on PC. 825#EXTRA_LIBS = -lXext -lSM -lICE -lbsd 826### For LynxOS 3.0.1, tested on PPC 827#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu -liberty -lX11 828### For LynxOS 3.1.0, tested on PC 829#EXTRA_LIBS= -lXext -lSM -lICE -lnetinet -lXmu 830 831 832### (V) For CX/UX 6.2 (on Harris/Concurrent NightHawk 4800, 5800). Remove 833### -Qtarget if only in a 5800 environment. (Kipp E. Howard) 834#CFLAGS = -O -Qtarget=m88110compat 835#EXTRA_LIBS = -lgen 836 837##################### end of system specific lines ################### }}} 838 839### Names of the programs and targets {{{1 840VIMTARGET = $(VIMNAME)$(EXEEXT) 841EXTARGET = $(EXNAME)$(LNKEXT) 842VIEWTARGET = $(VIEWNAME)$(LNKEXT) 843GVIMNAME = g$(VIMNAME) 844GVIMTARGET = $(GVIMNAME)$(LNKEXT) 845GVIEWNAME = g$(VIEWNAME) 846GVIEWTARGET = $(GVIEWNAME)$(LNKEXT) 847RVIMNAME = r$(VIMNAME) 848RVIMTARGET = $(RVIMNAME)$(LNKEXT) 849RVIEWNAME = r$(VIEWNAME) 850RVIEWTARGET = $(RVIEWNAME)$(LNKEXT) 851RGVIMNAME = r$(GVIMNAME) 852RGVIMTARGET = $(RGVIMNAME)$(LNKEXT) 853RGVIEWNAME = r$(GVIEWNAME) 854RGVIEWTARGET = $(RGVIEWNAME)$(LNKEXT) 855VIMDIFFNAME = $(VIMNAME)diff 856GVIMDIFFNAME = g$(VIMDIFFNAME) 857VIMDIFFTARGET = $(VIMDIFFNAME)$(LNKEXT) 858GVIMDIFFTARGET = $(GVIMDIFFNAME)$(LNKEXT) 859EVIMNAME = e$(VIMNAME) 860EVIMTARGET = $(EVIMNAME)$(LNKEXT) 861EVIEWNAME = e$(VIEWNAME) 862EVIEWTARGET = $(EVIEWNAME)$(LNKEXT) 863 864### Names of the tools that are also made {{{1 865TOOLS = xxd/xxd$(EXEEXT) 866 867### Installation directories. The defaults come from configure. {{{1 868# 869### prefix the top directory for the data (default "/usr/local") 870# 871# Uncomment the next line to install Vim in your home directory. 872#prefix = $(HOME) 873 874### exec_prefix is the top directory for the executable (default $(prefix)) 875# 876# Uncomment the next line to install the Vim executable in "/usr/machine/bin" 877#exec_prefix = /usr/machine 878 879### BINDIR dir for the executable (default "$(exec_prefix)/bin") 880### MANDIR dir for the manual pages (default "$(prefix)/man") 881### DATADIR dir for the other files (default "$(prefix)/lib" or 882# "$(prefix)/share") 883# They may be different when using different architectures for the 884# executable and a common directory for the other files. 885# 886# Uncomment the next line to install Vim in "/usr/bin" 887#BINDIR = /usr/bin 888# Uncomment the next line to install Vim manuals in "/usr/share/man/man1" 889#MANDIR = /usr/share/man 890# Uncomment the next line to install Vim help files in "/usr/share/vim" 891#DATADIR = /usr/share 892 893### DESTDIR root of the installation tree. This is prepended to the other 894# directories. This directory must exist. 895#DESTDIR = ~/pkg/vim 896 897### Directory of the man pages 898MAN1DIR = /man1 899 900### Vim version (adjusted by a script) 901VIMMAJOR = 7 902VIMMINOR = 2a 903 904### Location of Vim files (should not need to be changed, and {{{1 905### some things might not work when they are changed!) 906VIMDIR = /vim 907VIMRTDIR = /vim$(VIMMAJOR)$(VIMMINOR) 908HELPSUBDIR = /doc 909COLSUBDIR = /colors 910SYNSUBDIR = /syntax 911INDSUBDIR = /indent 912AUTOSUBDIR = /autoload 913PLUGSUBDIR = /plugin 914FTPLUGSUBDIR = /ftplugin 915LANGSUBDIR = /lang 916COMPSUBDIR = /compiler 917KMAPSUBDIR = /keymap 918MACROSUBDIR = /macros 919TOOLSSUBDIR = /tools 920TUTORSUBDIR = /tutor 921SPELLSUBDIR = /spell 922PRINTSUBDIR = /print 923PODIR = po 924 925### VIMLOC common root of the Vim files (all versions) 926### VIMRTLOC common root of the runtime Vim files (this version) 927### VIMRCLOC compiled-in location for global [g]vimrc files (all versions) 928### VIMRUNTIMEDIR compiled-in location for runtime files (optional) 929### HELPSUBLOC location for help files 930### COLSUBLOC location for colorscheme files 931### SYNSUBLOC location for syntax files 932### INDSUBLOC location for indent files 933### AUTOSUBLOC location for standard autoload files 934### PLUGSUBLOC location for standard plugin files 935### FTPLUGSUBLOC location for ftplugin files 936### LANGSUBLOC location for language files 937### COMPSUBLOC location for compiler files 938### KMAPSUBLOC location for keymap files 939### MACROSUBLOC location for macro files 940### TOOLSSUBLOC location for tools files 941### TUTORSUBLOC location for tutor files 942### SPELLSUBLOC location for spell files 943### PRINTSUBLOC location for PostScript files (prolog, latin1, ..) 944### SCRIPTLOC location for script files (menu.vim, bugreport.vim, ..) 945### You can override these if you want to install them somewhere else. 946### Edit feature.h for compile-time settings. 947VIMLOC = $(DATADIR)$(VIMDIR) 948VIMRTLOC = $(DATADIR)$(VIMDIR)$(VIMRTDIR) 949VIMRCLOC = $(VIMLOC) 950HELPSUBLOC = $(VIMRTLOC)$(HELPSUBDIR) 951COLSUBLOC = $(VIMRTLOC)$(COLSUBDIR) 952SYNSUBLOC = $(VIMRTLOC)$(SYNSUBDIR) 953INDSUBLOC = $(VIMRTLOC)$(INDSUBDIR) 954AUTOSUBLOC = $(VIMRTLOC)$(AUTOSUBDIR) 955PLUGSUBLOC = $(VIMRTLOC)$(PLUGSUBDIR) 956FTPLUGSUBLOC = $(VIMRTLOC)$(FTPLUGSUBDIR) 957LANGSUBLOC = $(VIMRTLOC)$(LANGSUBDIR) 958COMPSUBLOC = $(VIMRTLOC)$(COMPSUBDIR) 959KMAPSUBLOC = $(VIMRTLOC)$(KMAPSUBDIR) 960MACROSUBLOC = $(VIMRTLOC)$(MACROSUBDIR) 961TOOLSSUBLOC = $(VIMRTLOC)$(TOOLSSUBDIR) 962TUTORSUBLOC = $(VIMRTLOC)$(TUTORSUBDIR) 963SPELLSUBLOC = $(VIMRTLOC)$(SPELLSUBDIR) 964PRINTSUBLOC = $(VIMRTLOC)$(PRINTSUBDIR) 965SCRIPTLOC = $(VIMRTLOC) 966 967### Only set VIMRUNTIMEDIR when VIMRTLOC is set to a different location and 968### the runtime directory is not below it. 969#VIMRUNTIMEDIR = $(VIMRTLOC) 970 971### Name of the evim file target. 972EVIM_FILE = $(DESTDIR)$(SCRIPTLOC)/evim.vim 973MSWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/mswin.vim 974 975### Name of the menu file target. 976SYS_MENU_FILE = $(DESTDIR)$(SCRIPTLOC)/menu.vim 977SYS_SYNMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/synmenu.vim 978SYS_DELMENU_FILE = $(DESTDIR)$(SCRIPTLOC)/delmenu.vim 979 980### Name of the bugreport file target. 981SYS_BUGR_FILE = $(DESTDIR)$(SCRIPTLOC)/bugreport.vim 982 983### Name of the file type detection file target. 984SYS_FILETYPE_FILE = $(DESTDIR)$(SCRIPTLOC)/filetype.vim 985 986### Name of the file type detection file target. 987SYS_FTOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftoff.vim 988 989### Name of the file type detection script file target. 990SYS_SCRIPTS_FILE = $(DESTDIR)$(SCRIPTLOC)/scripts.vim 991 992### Name of the ftplugin-on file target. 993SYS_FTPLUGIN_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugin.vim 994 995### Name of the ftplugin-off file target. 996SYS_FTPLUGOF_FILE = $(DESTDIR)$(SCRIPTLOC)/ftplugof.vim 997 998### Name of the indent-on file target. 999SYS_INDENT_FILE = $(DESTDIR)$(SCRIPTLOC)/indent.vim 1000 1001### Name of the indent-off file target. 1002SYS_INDOFF_FILE = $(DESTDIR)$(SCRIPTLOC)/indoff.vim 1003 1004### Name of the option window script file target. 1005SYS_OPTWIN_FILE = $(DESTDIR)$(SCRIPTLOC)/optwin.vim 1006 1007# Program to install the program in the target directory. Could also be "mv". 1008INSTALL_PROG = cp 1009 1010# Program to install the data in the target directory. Cannot be "mv"! 1011INSTALL_DATA = cp 1012INSTALL_DATA_R = cp -r 1013 1014### Program to run on installed binary 1015#STRIP = strip 1016 1017### Permissions for binaries {{{1 1018BINMOD = 755 1019 1020### Permissions for man page 1021MANMOD = 644 1022 1023### Permissions for help files 1024HELPMOD = 644 1025 1026### Permissions for Perl and shell scripts 1027SCRIPTMOD = 755 1028 1029### Permission for Vim script files (menu.vim, bugreport.vim, ..) 1030VIMSCRIPTMOD = 644 1031 1032### Permissions for all directories that are created 1033DIRMOD = 755 1034 1035### Permissions for all other files that are created 1036FILEMOD = 644 1037 1038# Where to copy the man and help files from 1039HELPSOURCE = ../runtime/doc 1040 1041# Where to copy the script files from (menu, bugreport) 1042SCRIPTSOURCE = ../runtime 1043 1044# Where to copy the colorscheme files from 1045COLSOURCE = ../runtime/colors 1046 1047# Where to copy the syntax files from 1048SYNSOURCE = ../runtime/syntax 1049 1050# Where to copy the indent files from 1051INDSOURCE = ../runtime/indent 1052 1053# Where to copy the standard plugin files from 1054AUTOSOURCE = ../runtime/autoload 1055 1056# Where to copy the standard plugin files from 1057PLUGSOURCE = ../runtime/plugin 1058 1059# Where to copy the ftplugin files from 1060FTPLUGSOURCE = ../runtime/ftplugin 1061 1062# Where to copy the macro files from 1063MACROSOURCE = ../runtime/macros 1064 1065# Where to copy the tools files from 1066TOOLSSOURCE = ../runtime/tools 1067 1068# Where to copy the tutor files from 1069TUTORSOURCE = ../runtime/tutor 1070 1071# Where to copy the spell files from 1072SPELLSOURCE = ../runtime/spell 1073 1074# Where to look for language specific files 1075LANGSOURCE = ../runtime/lang 1076 1077# Where to look for compiler files 1078COMPSOURCE = ../runtime/compiler 1079 1080# Where to look for keymap files 1081KMAPSOURCE = ../runtime/keymap 1082 1083# Where to look for print resource files 1084PRINTSOURCE = ../runtime/print 1085 1086# If you are using Linux, you might want to use this to make vim the 1087# default vi editor, it will create a link from vi to Vim when doing 1088# "make install". An existing file will be overwritten! 1089# When not using it, some make programs can't handle an undefined $(LINKIT). 1090#LINKIT = ln -f -s $(DEST_BIN)/$(VIMTARGET) $(DESTDIR)/usr/bin/vi 1091LINKIT = @echo >/dev/null 1092 1093### 1094### GRAPHICAL USER INTERFACE (GUI). {{{1 1095### 'configure --enable-gui' can enable one of these for you if you did set 1096### a corresponding CONF_OPT_GUI above and have X11. 1097### Override configures choice by uncommenting all the following lines. 1098### As they are, the GUI is disabled. Replace "NONE" with "ATHENA" or "MOTIF" 1099### for enabling the Athena or Motif GUI. 1100#GUI_SRC = $(NONE_SRC) 1101#GUI_OBJ = $(NONE_OBJ) 1102#GUI_DEFS = $(NONE_DEFS) 1103#GUI_IPATH = $(NONE_IPATH) 1104#GUI_LIBS_DIR = $(NONE_LIBS_DIR) 1105#GUI_LIBS1 = $(NONE_LIBS1) 1106#GUI_LIBS2 = $(NONE_LIBS2) 1107#GUI_INSTALL = $(NONE_INSTALL) 1108#GUI_TARGETS = $(NONE_TARGETS) 1109#GUI_MAN_TARGETS= $(NONE_MAN_TARGETS) 1110#GUI_TESTTARGET = $(NONE_TESTTARGET) 1111#GUI_BUNDLE = $(NONE_BUNDLE) 1112 1113# Without a GUI install the normal way. 1114NONE_INSTALL = install_normal 1115 1116### GTK GUI 1117GTK_SRC = gui.c gui_gtk.c gui_gtk_x11.c pty.c gui_gtk_f.c \ 1118 gui_beval.c 1119GTK_OBJ = objects/gui.o objects/gui_gtk.o objects/gui_gtk_x11.o \ 1120 objects/pty.o objects/gui_gtk_f.o \ 1121 objects/gui_beval.o 1122GTK_DEFS = -DFEAT_GUI_GTK $(NARROW_PROTO) 1123GTK_IPATH = $(GUI_INC_LOC) 1124GTK_LIBS_DIR = $(GUI_LIB_LOC) 1125GTK_LIBS1 = 1126GTK_LIBS2 = $(GTK_LIBNAME) 1127GTK_INSTALL = install_normal install_gui_extra 1128GTK_TARGETS = installglinks 1129GTK_MAN_TARGETS = yes 1130GTK_TESTTARGET = gui 1131GTK_BUNDLE = 1132 1133### Motif GUI 1134MOTIF_SRC = gui.c gui_motif.c gui_x11.c pty.c gui_beval.c \ 1135 gui_xmdlg.c gui_xmebw.c 1136MOTIF_OBJ = objects/gui.o objects/gui_motif.o objects/gui_x11.o \ 1137 objects/pty.o objects/gui_beval.o \ 1138 objects/gui_xmdlg.o objects/gui_xmebw.o 1139MOTIF_DEFS = -DFEAT_GUI_MOTIF $(NARROW_PROTO) 1140MOTIF_IPATH = $(GUI_INC_LOC) 1141MOTIF_LIBS_DIR = $(GUI_LIB_LOC) 1142MOTIF_LIBS1 = 1143MOTIF_LIBS2 = $(MOTIF_LIBNAME) -lXt 1144MOTIF_INSTALL = install_normal install_gui_extra 1145MOTIF_TARGETS = installglinks 1146MOTIF_MAN_TARGETS = yes 1147MOTIF_TESTTARGET = gui 1148MOTIF_BUNDLE = 1149 1150### Athena GUI 1151### Use Xaw3d to make the menus look a little bit nicer 1152#XAW_LIB = -lXaw3d 1153XAW_LIB = -lXaw 1154 1155### When using Xaw3d, uncomment/comment the following lines to also get the 1156### scrollbars from Xaw3d. 1157#ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1158#ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1159# objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1160#ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) \ 1161# -Dvim_scrollbarWidgetClass=scrollbarWidgetClass \ 1162# -Dvim_XawScrollbarSetThumb=XawScrollbarSetThumb 1163ATHENA_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c \ 1164 gui_at_sb.c gui_at_fs.c 1165ATHENA_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1166 objects/pty.o objects/gui_beval.o \ 1167 objects/gui_at_sb.o objects/gui_at_fs.o 1168ATHENA_DEFS = -DFEAT_GUI_ATHENA $(NARROW_PROTO) 1169 1170ATHENA_IPATH = $(GUI_INC_LOC) 1171ATHENA_LIBS_DIR = $(GUI_LIB_LOC) 1172ATHENA_LIBS1 = $(XAW_LIB) 1173ATHENA_LIBS2 = -lXt 1174ATHENA_INSTALL = install_normal install_gui_extra 1175ATHENA_TARGETS = installglinks 1176ATHENA_MAN_TARGETS = yes 1177ATHENA_TESTTARGET = gui 1178ATHENA_BUNDLE = 1179 1180### neXtaw GUI 1181NEXTAW_LIB = -lneXtaw 1182 1183NEXTAW_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_beval.c gui_at_fs.c 1184NEXTAW_OBJ = objects/gui.o objects/gui_athena.o objects/gui_x11.o \ 1185 objects/pty.o objects/gui_beval.o objects/gui_at_fs.o 1186NEXTAW_DEFS = -DFEAT_GUI_ATHENA -DFEAT_GUI_NEXTAW $(NARROW_PROTO) 1187 1188NEXTAW_IPATH = $(GUI_INC_LOC) 1189NEXTAW_LIBS_DIR = $(GUI_LIB_LOC) 1190NEXTAW_LIBS1 = $(NEXTAW_LIB) 1191NEXTAW_LIBS2 = -lXt 1192NEXTAW_INSTALL = install_normal install_gui_extra 1193NEXTAW_TARGETS = installglinks 1194NEXTAW_MAN_TARGETS = yes 1195NEXTAW_TESTTARGET = gui 1196NEXTAW_BUNDLE = 1197 1198### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld 1199# errors: ld: Undefined symbol 1200# _get_wmShellWidgetClass 1201# _get_applicationShellWidgetClass 1202# then you need to get patches 100512-02 and 100573-03 from Sun. In the 1203# meantime, uncomment the following GUI_X_LIBS definition as a workaround: 1204#GUI_X_LIBS = -Bstatic -lXmu -Bdynamic -lXext 1205# If you also get cos, sin etc. as undefined symbols, try uncommenting this 1206# too: 1207#EXTRA_LIBS = /usr/openwin/lib/libXmu.sa -lm 1208 1209# PHOTON GUI 1210PHOTONGUI_SRC = gui.c gui_photon.c pty.c 1211PHOTONGUI_OBJ = objects/gui.o objects/gui_photon.o objects/pty.o 1212PHOTONGUI_DEFS = -DFEAT_GUI_PHOTON 1213PHOTONGUI_IPATH = 1214PHOTONGUI_LIBS_DIR = 1215PHOTONGUI_LIBS1 = -lph -lphexlib 1216PHOTONGUI_LIBS2 = 1217PHOTONGUI_INSTALL = install_normal install_gui_extra 1218PHOTONGUI_TARGETS = installglinks 1219PHOTONGUI_MAN_TARGETS = yes 1220PHOTONGUI_TESTTARGET = gui 1221PHOTONGUI_BUNDLE = 1222 1223# CARBON GUI 1224CARBONGUI_SRC = gui.c gui_mac.c 1225CARBONGUI_OBJ = objects/gui.o objects/gui_mac.o objects/pty.o 1226CARBONGUI_DEFS = -DFEAT_GUI_MAC -fno-common -fpascal-strings \ 1227 -Wall -Wno-unknown-pragmas \ 1228 -mdynamic-no-pic -pipe 1229CARBONGUI_IPATH = -I. -Iproto 1230CARBONGUI_LIBS_DIR = 1231CARBONGUI_LIBS1 = -framework Carbon 1232CARBONGUI_LIBS2 = 1233CARBONGUI_INSTALL = install_macosx 1234CARBONGUI_TARGETS = 1235CARBONGUI_MAN_TARGETS = 1236CARBONGUI_TESTTARGET = gui 1237CARBONGUI_BUNDLE = gui_bundle 1238APPDIR = $(VIMNAME).app 1239CARBONGUI_TESTARG = VIMPROG=../$(APPDIR)/Contents/MacOS/$(VIMTARGET) 1240 1241# All GUI files 1242ALL_GUI_SRC = gui.c gui_gtk.c gui_gtk_f.c gui_motif.c gui_xmdlg.c gui_xmebw.c gui_athena.c gui_gtk_x11.c gui_x11.c gui_at_sb.c gui_at_fs.c pty.c 1243ALL_GUI_PRO = gui.pro gui_gtk.pro gui_motif.pro gui_xmdlg.pro gui_athena.pro gui_gtk_x11.pro gui_x11.pro gui_w16.pro gui_w32.pro gui_photon.pro 1244 1245# }}} 1246 1247### Command to create dependencies based on #include "..." 1248### prototype headers are ignored due to -DPROTO, system 1249### headers #include <...> are ignored if we use the -MM option, as 1250### e.g. provided by gcc-cpp. 1251### Include FEAT_GUI to get gependency on gui.h 1252### Need to change "-I /<path>" to "-isystem /<path>" for GCC 3.x. 1253CPP_DEPEND = $(CC) -I$(srcdir) -M$(CPP_MM) \ 1254 `echo "$(DEPEND_CFLAGS)" $(DEPEND_CFLAGS_FILTER)` 1255 1256# flags for cproto 1257# This is for cproto 3 patchlevel 8 or below 1258# __inline, __attribute__ and __extension__ are not recognized by cproto 1259# G_IMPLEMENT_INLINES is to avoid functions defined in glib/gutils.h. 1260NO_ATTR = -D__inline= -D__inline__= -DG_IMPLEMENT_INLINES \ 1261 -D"__attribute__\\(x\\)=" -D"__asm__\\(x\\)=" \ 1262 -D__extension__= -D__restrict="" \ 1263 -D__gnuc_va_list=char -D__builtin_va_list=char 1264 1265# 1266# This is for cproto 3 patchlevel 9 or above (currently 4.6) 1267# __inline and __attribute__ are now recognized by cproto 1268# -D"foo()=" is not supported by all compilers so do not use it 1269# NO_ATTR= 1270# 1271# maybe the "/usr/bin/cc -E" has to be adjusted for some systems 1272# This is for cproto 3.5 patchlevel 3: 1273# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1274# 1275# Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): 1276# PROTO_FLAGS = -f4 -m__ARGS -d -E"$(CPP)" $(NO_ATTR) 1277# 1278# Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): 1279PROTO_FLAGS = -m -M__ARGS -d -E"$(CPP)" $(NO_ATTR) 1280 1281 1282################################################ 1283## no changes required below this line ## 1284################################################ 1285 1286SHELL = /bin/sh 1287 1288.SUFFIXES: 1289.SUFFIXES: .c .o .pro 1290 1291PRE_DEFS = -Iproto $(DEFS) $(GUI_DEFS) $(GUI_IPATH) $(CPPFLAGS) $(EXTRA_IPATHS) 1292POST_DEFS = $(X_CFLAGS) $(MZSCHEME_CFLAGS) $(PERL_CFLAGS) $(PYTHON_CFLAGS) $(TCL_CFLAGS) $(RUBY_CFLAGS) $(EXTRA_DEFS) 1293 1294ALL_CFLAGS = $(PRE_DEFS) $(CFLAGS) $(PROFILE_CFLAGS) $(POST_DEFS) 1295 1296# Exclude $CFLAGS for osdef.sh, for Mac 10.4 some flags don't work together 1297# with "-E". 1298OSDEF_CFLAGS = $(PRE_DEFS) $(POST_DEFS) 1299 1300LINT_CFLAGS = -DLINT -I. $(PRE_DEFS) $(POST_DEFS) -Dinline= -D__extension__= -Dalloca=alloca 1301 1302LINT_EXTRA = -DUSE_SNIFF -DHANGUL_INPUT -D"__attribute__(x)=" 1303 1304DEPEND_CFLAGS = -DPROTO -DDEPEND -DFEAT_GUI $(LINT_CFLAGS) 1305 1306# If you have problems with flags that cproto doesn't support, and you are 1307# using GNU make, you can try using the other line to filter out arguments. 1308#PFLAGS = $(PROTO_FLAGS) -DPROTO $(filter -D% -I%, $(LINT_CFLAGS)) 1309PFLAGS = $(PROTO_FLAGS) -DPROTO $(LINT_CFLAGS) 1310 1311ALL_LIB_DIRS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) 1312ALL_LIBS = $(GUI_LIBS1) $(GUI_X_LIBS) $(GUI_LIBS2) $(X_PRE_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) $(MZSCHEME_LIBS) $(PERL_LIBS) $(PYTHON_LIBS) $(TCL_LIBS) $(RUBY_LIBS) $(PROFILE_LIBS) 1313 1314# abbreviations 1315DEST_BIN = $(DESTDIR)$(BINDIR) 1316DEST_VIM = $(DESTDIR)$(VIMLOC) 1317DEST_RT = $(DESTDIR)$(VIMRTLOC) 1318DEST_HELP = $(DESTDIR)$(HELPSUBLOC) 1319DEST_COL = $(DESTDIR)$(COLSUBLOC) 1320DEST_SYN = $(DESTDIR)$(SYNSUBLOC) 1321DEST_IND = $(DESTDIR)$(INDSUBLOC) 1322DEST_AUTO = $(DESTDIR)$(AUTOSUBLOC) 1323DEST_PLUG = $(DESTDIR)$(PLUGSUBLOC) 1324DEST_FTP = $(DESTDIR)$(FTPLUGSUBLOC) 1325DEST_LANG = $(DESTDIR)$(LANGSUBLOC) 1326DEST_COMP = $(DESTDIR)$(COMPSUBLOC) 1327DEST_KMAP = $(DESTDIR)$(KMAPSUBLOC) 1328DEST_MACRO = $(DESTDIR)$(MACROSUBLOC) 1329DEST_TOOLS = $(DESTDIR)$(TOOLSSUBLOC) 1330DEST_TUTOR = $(DESTDIR)$(TUTORSUBLOC) 1331DEST_SPELL = $(DESTDIR)$(SPELLSUBLOC) 1332DEST_SCRIPT = $(DESTDIR)$(SCRIPTLOC) 1333DEST_PRINT = $(DESTDIR)$(PRINTSUBLOC) 1334DEST_MAN_TOP = $(DESTDIR)$(MANDIR) 1335 1336# We assume that the ".../man/xx/man1/" directory is for latin1 manual pages. 1337# Some systems use UTF-8, but these should find the ".../man/xx.UTF-8/man1/" 1338# directory first. 1339# FreeBSD uses ".../man/xx.ISO8859-1/man1" for latin1, use that one too. 1340DEST_MAN = $(DEST_MAN_TOP)$(MAN1DIR) 1341DEST_MAN_FR = $(DEST_MAN_TOP)/fr$(MAN1DIR) 1342DEST_MAN_FR_I = $(DEST_MAN_TOP)/fr.ISO8859-1$(MAN1DIR) 1343DEST_MAN_FR_U = $(DEST_MAN_TOP)/fr.UTF-8$(MAN1DIR) 1344DEST_MAN_IT = $(DEST_MAN_TOP)/it$(MAN1DIR) 1345DEST_MAN_IT_I = $(DEST_MAN_TOP)/it.ISO8859-1$(MAN1DIR) 1346DEST_MAN_IT_U = $(DEST_MAN_TOP)/it.UTF-8$(MAN1DIR) 1347DEST_MAN_PL = $(DEST_MAN_TOP)/pl$(MAN1DIR) 1348DEST_MAN_PL_I = $(DEST_MAN_TOP)/pl.ISO8859-2$(MAN1DIR) 1349DEST_MAN_PL_U = $(DEST_MAN_TOP)/pl.UTF-8$(MAN1DIR) 1350DEST_MAN_RU = $(DEST_MAN_TOP)/ru.KOI8-R$(MAN1DIR) 1351DEST_MAN_RU_U = $(DEST_MAN_TOP)/ru.UTF-8$(MAN1DIR) 1352 1353# BASIC_SRC: files that are always used 1354# GUI_SRC: extra GUI files for current configuration 1355# ALL_GUI_SRC: all GUI files for Unix 1356# 1357# SRC: files used for current configuration 1358# TAGS_SRC: source files used for make tags 1359# TAGS_INCL: include files used for make tags 1360# ALL_SRC: source files used for make depend and make lint 1361 1362TAGS_INCL = *.h 1363 1364BASIC_SRC = \ 1365 buffer.c \ 1366 charset.c \ 1367 diff.c \ 1368 digraph.c \ 1369 edit.c \ 1370 eval.c \ 1371 ex_cmds.c \ 1372 ex_cmds2.c \ 1373 ex_docmd.c \ 1374 ex_eval.c \ 1375 ex_getln.c \ 1376 fileio.c \ 1377 fold.c \ 1378 getchar.c \ 1379 hardcopy.c \ 1380 hashtab.c \ 1381 if_cscope.c \ 1382 if_xcmdsrv.c \ 1383 main.c \ 1384 mark.c \ 1385 memfile.c \ 1386 memline.c \ 1387 menu.c \ 1388 message.c \ 1389 misc1.c \ 1390 misc2.c \ 1391 move.c \ 1392 mbyte.c \ 1393 normal.c \ 1394 ops.c \ 1395 option.c \ 1396 os_unix.c \ 1397 auto/pathdef.c \ 1398 popupmnu.c \ 1399 quickfix.c \ 1400 regexp.c \ 1401 screen.c \ 1402 search.c \ 1403 spell.c \ 1404 syntax.c \ 1405 tag.c \ 1406 term.c \ 1407 ui.c \ 1408 undo.c \ 1409 version.c \ 1410 window.c \ 1411 $(OS_EXTRA_SRC) 1412 1413SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(MZSCHEME_SRC) \ 1414 $(PERL_SRC) $(PYTHON_SRC) $(TCL_SRC) $(RUBY_SRC) \ 1415 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) 1416 1417TAGS_SRC = *.c *.cpp if_perl.xs 1418 1419EXTRA_SRC = hangulin.c if_mzsch.c auto/if_perl.c if_perlsfio.c \ 1420 if_python.c if_tcl.c if_ruby.c if_sniff.c gui_beval.c \ 1421 workshop.c wsdebug.c integration.c netbeans.c 1422 1423# All sources, also the ones that are not configured 1424ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) $(EXTRA_SRC) 1425 1426# Which files to check with lint. Select one of these three lines. ALL_SRC 1427# checks more, but may not work well for checking a GUI that wasn't configured. 1428# The perl sources also don't work well with lint. 1429LINT_SRC = $(BASIC_SRC) $(GUI_SRC) $(HANGULIN_SRC) $(PYTHON_SRC) $(TCL_SRC) \ 1430 $(SNIFF_SRC) $(WORKSHOP_SRC) $(WSDEBUG_SRC) $(NETBEANS_SRC) 1431#LINT_SRC = $(SRC) 1432#LINT_SRC = $(ALL_SRC) 1433 1434OBJ = \ 1435 objects/buffer.o \ 1436 objects/charset.o \ 1437 objects/diff.o \ 1438 objects/digraph.o \ 1439 objects/edit.o \ 1440 objects/eval.o \ 1441 objects/ex_cmds.o \ 1442 objects/ex_cmds2.o \ 1443 objects/ex_docmd.o \ 1444 objects/ex_eval.o \ 1445 objects/ex_getln.o \ 1446 objects/fileio.o \ 1447 objects/fold.o \ 1448 objects/getchar.o \ 1449 objects/hardcopy.o \ 1450 objects/hashtab.o \ 1451 $(HANGULIN_OBJ) \ 1452 objects/if_cscope.o \ 1453 objects/if_xcmdsrv.o \ 1454 objects/main.o \ 1455 objects/mark.o \ 1456 objects/memfile.o \ 1457 objects/memline.o \ 1458 objects/menu.o \ 1459 objects/message.o \ 1460 objects/misc1.o \ 1461 objects/misc2.o \ 1462 objects/move.o \ 1463 objects/mbyte.o \ 1464 objects/normal.o \ 1465 objects/ops.o \ 1466 objects/option.o \ 1467 objects/os_unix.o \ 1468 objects/pathdef.o \ 1469 objects/popupmnu.o \ 1470 objects/quickfix.o \ 1471 objects/regexp.o \ 1472 objects/screen.o \ 1473 objects/search.o \ 1474 objects/spell.o \ 1475 objects/syntax.o \ 1476 $(SNIFF_OBJ) \ 1477 objects/tag.o \ 1478 objects/term.o \ 1479 objects/ui.o \ 1480 objects/undo.o \ 1481 objects/window.o \ 1482 $(GUI_OBJ) \ 1483 $(MZSCHEME_OBJ) \ 1484 $(PERL_OBJ) \ 1485 $(PYTHON_OBJ) \ 1486 $(TCL_OBJ) \ 1487 $(RUBY_OBJ) \ 1488 $(OS_EXTRA_OBJ) \ 1489 $(WORKSHOP_OBJ) \ 1490 $(NETBEANS_OBJ) \ 1491 $(WSDEBUG_OBJ) 1492 1493PRO_AUTO = \ 1494 buffer.pro \ 1495 charset.pro \ 1496 diff.pro \ 1497 digraph.pro \ 1498 edit.pro \ 1499 eval.pro \ 1500 ex_cmds.pro \ 1501 ex_cmds2.pro \ 1502 ex_docmd.pro \ 1503 ex_eval.pro \ 1504 ex_getln.pro \ 1505 fileio.pro \ 1506 fold.pro \ 1507 getchar.pro \ 1508 hardcopy.pro \ 1509 hashtab.pro \ 1510 hangulin.pro \ 1511 if_cscope.pro \ 1512 if_xcmdsrv.pro \ 1513 if_python.pro \ 1514 if_ruby.pro \ 1515 main.pro \ 1516 mark.pro \ 1517 memfile.pro \ 1518 memline.pro \ 1519 menu.pro \ 1520 message.pro \ 1521 misc1.pro \ 1522 misc2.pro \ 1523 move.pro \ 1524 mbyte.pro \ 1525 normal.pro \ 1526 ops.pro \ 1527 option.pro \ 1528 os_unix.pro \ 1529 popupmnu.pro \ 1530 quickfix.pro \ 1531 regexp.pro \ 1532 screen.pro \ 1533 search.pro \ 1534 spell.pro \ 1535 syntax.pro \ 1536 tag.pro \ 1537 term.pro \ 1538 termlib.pro \ 1539 ui.pro \ 1540 undo.pro \ 1541 version.pro \ 1542 window.pro \ 1543 gui_beval.pro \ 1544 workshop.pro \ 1545 netbeans.pro \ 1546 $(ALL_GUI_PRO) \ 1547 $(TCL_PRO) 1548 1549# Resources used for the Mac are in one directory. 1550RSRC_DIR = os_mac_rsrc 1551 1552PRO_MANUAL = os_amiga.pro os_msdos.pro os_win16.pro os_win32.pro \ 1553 os_mswin.pro os_beos.pro os_vms.pro os_riscos.pro $(PERL_PRO) 1554 1555# Default target is making the executable and tools 1556all: $(VIMTARGET) $(TOOLS) languages $(GUI_BUNDLE) 1557 1558tools: $(TOOLS) 1559 1560# Run configure with all the setting from above. 1561# 1562# Note: auto/config.h doesn't depend on configure, because running configure 1563# doesn't always update auto/config.h. The timestamp isn't changed if the 1564# file contents didn't change (to avoid recompiling everything). Including a 1565# dependency on auto/config.h would cause running configure each time when 1566# auto/config.h isn't updated. The dependency on auto/config.mk should make 1567# sure configure is run when it's needed. 1568# 1569config auto/config.mk: auto/configure config.mk.in config.h.in 1570 GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ 1571 CC="$(CC)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" \ 1572 LDFLAGS="$(LDFLAGS)" $(CONF_SHELL) srcdir="$(srcdir)" \ 1573 ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) $(CONF_OPT_XSMP) \ 1574 $(CONF_OPT_DARWIN) $(CONF_OPT_PERL) $(CONF_OPT_PYTHON) \ 1575 $(CONF_OPT_TCL) $(CONF_OPT_RUBY) $(CONF_OPT_NLS) \ 1576 $(CONF_OPT_CSCOPE) $(CONF_OPT_MULTIBYTE) $(CONF_OPT_INPUT) \ 1577 $(CONF_OPT_OUTPUT) $(CONF_OPT_GPM) $(CONF_OPT_WORKSHOP) \ 1578 $(CONF_OPT_SNIFF) $(CONF_OPT_FEAT) $(CONF_TERM_LIB) \ 1579 $(CONF_OPT_COMPBY) $(CONF_OPT_ACL) $(CONF_OPT_NETBEANS) \ 1580 $(CONF_ARGS) $(CONF_OPT_MZSCHEME) $(CONF_OPT_PLTHOME) \ 1581 $(CONF_OPT_SYSMOUSE) 1582 1583# Use "make reconfig" to rerun configure without cached values. 1584# When config.h changes, most things will be recompiled automatically. 1585# Invoke $(MAKE) to run config with the empty auto/config.mk. 1586# Invoke $(MAKE) to build all with the filled auto/config.mk. 1587reconfig: scratch clean 1588 $(MAKE) -f Makefile config 1589 $(MAKE) -f Makefile all 1590 1591# Run autoconf to produce auto/configure. 1592# Note: 1593# - DO NOT RUN autoconf MANUALLY! It will overwrite ./configure instead of 1594# producing auto/configure. 1595# - autoconf is not run automatically, because a patch usually changes both 1596# configure.in and auto/configure but can't update the timestamps. People 1597# who do not have (the correct version of) autoconf would run into trouble. 1598# 1599# Two tricks are required to make autoconf put its output in the "auto" dir: 1600# - Temporarily move the ./configure script to ./configure.save. Don't 1601# overwrite it, it's probably the result of an aborted autoconf. 1602# - Use sed to change ./config.log to auto/config.log in the configure script. 1603# Autoconf 2.5x (2.59 at least) produces a few more files that we need to take 1604# care of: 1605# - configure.lineno: has the line numbers replaced with $LINENO. That 1606# improves patches a LOT, thus use it instead (until someone says it doesn't 1607# work on some system). 1608# - autom4te.cache directory is created and not cleaned up. Delete it. 1609# - Uses ">config.log" instead of "./config.log". 1610autoconf: 1611 if test ! -f configure.save; then mv configure configure.save; fi 1612 autoconf 1613 sed -e 's+>config.log+>auto/config.log+' -e 's+\./config.log+auto/config.log+' configure > auto/configure 1614 chmod 755 auto/configure 1615 mv -f configure.save configure 1616 -rm -rf autom4te.cache 1617 -rm -f auto/config.status auto/config.cache 1618 1619# Re-execute this Makefile to include the new auto/config.mk produced by 1620# configure Only used when typing "make" with a fresh auto/config.mk. 1621myself: 1622 $(MAKE) -f Makefile all 1623 1624 1625# The normal command to compile a .c file to its .o file. 1626CCC = $(CC) -c -I$(srcdir) $(ALL_CFLAGS) 1627 1628 1629# Link the target for normal use or debugging. 1630# A shell script is used to try linking without unneccesary libraries. 1631$(VIMTARGET): auto/config.mk objects $(OBJ) version.c version.h 1632 $(CCC) version.c -o objects/version.o 1633 @LINK="$(PURIFY) $(SHRPENV) $(CClink) $(ALL_LIB_DIRS) $(LDFLAGS) \ 1634 -o $(VIMTARGET) $(OBJ) objects/version.o $(ALL_LIBS)" \ 1635 MAKE="$(MAKE)" sh $(srcdir)/link.sh 1636 1637xxd/xxd$(EXEEXT): xxd/xxd.c 1638 cd xxd; CC="$(CC)" CFLAGS="$(CPPFLAGS) $(CFLAGS)" \ 1639 $(MAKE) -f Makefile 1640 1641# Build the language specific files if they were unpacked. 1642# Generate the converted .mo files separately, it's no problem if this fails. 1643languages: 1644 @if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1645 cd $(PODIR); \ 1646 CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix); \ 1647 fi 1648 -@if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1649 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) converted; \ 1650 fi 1651 1652# Update the *.po files for changes in the sources. Only run manually. 1653update-po: 1654 cd $(PODIR); CC="$(CC)" $(MAKE) prefix=$(DESTDIR)$(prefix) update-po 1655 1656# Generate function prototypes. This is not needed to compile vim, but if 1657# you want to use it, cproto is out there on the net somewhere -- Webb 1658# 1659# When generating os_amiga.pro, os_msdos.pro and os_win32.pro there will be a 1660# few include files that can not be found, that's OK. 1661 1662proto: $(PRO_AUTO) $(PRO_MANUAL) 1663 1664### Would be nice if this would work for "normal" make. 1665### Currently it only works for (Free)BSD make. 1666#$(PRO_AUTO): $$(*F).c 1667# cproto $(PFLAGS) -DFEAT_GUI $(*F).c > $@ 1668 1669# Always define FEAT_GUI. This may generate a few warnings if it's also 1670# defined in auto/config.h, you can ignore that. 1671.c.pro: 1672 cproto $(PFLAGS) -DFEAT_GUI $< > proto/$@ 1673 echo "/* vim: set ft=c : */" >> proto/$@ 1674 1675os_amiga.pro: os_amiga.c 1676 cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* $< > proto/$@ 1677 echo "/* vim: set ft=c : */" >> proto/$@ 1678 1679os_msdos.pro: os_msdos.c 1680 cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H $< > proto/$@ 1681 echo "/* vim: set ft=c : */" >> proto/$@ 1682 1683os_win16.pro: os_win16.c 1684 cproto $(PFLAGS) -DWIN16 -UHAVE_CONFIG_H $< > proto/$@ 1685 echo "/* vim: set ft=c : */" >> proto/$@ 1686 1687os_win32.pro: os_win32.c 1688 cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1689 echo "/* vim: set ft=c : */" >> proto/$@ 1690 1691os_mswin.pro: os_mswin.c 1692 cproto $(PFLAGS) -DWIN16 -DWIN32 -UHAVE_CONFIG_H $< > proto/$@ 1693 echo "/* vim: set ft=c : */" >> proto/$@ 1694 1695os_beos.pro: os_beos.c 1696 cproto $(PFLAGS) -D__BEOS__ -UHAVE_CONFIG_H $< > proto/$@ 1697 echo "/* vim: set ft=c : */" >> proto/$@ 1698 1699os_vms.pro: os_vms.c 1700# must use os_vms_conf.h for auto/config.h 1701 mv auto/config.h auto/config.h.save 1702 cp os_vms_conf.h auto/config.h 1703 cproto $(PFLAGS) -DVMS -UFEAT_GUI_ATHENA -UFEAT_GUI_NEXTAW -UFEAT_GUI_MOTIF -UFEAT_GUI_GTK $< > proto/$@ 1704 echo "/* vim: set ft=c : */" >> proto/$@ 1705 rm auto/config.h 1706 mv auto/config.h.save auto/config.h 1707 1708# if_perl.pro is special: Use the generated if_perl.c for input and remove 1709# prototypes for local functions. 1710if_perl.pro: auto/if_perl.c 1711 cproto $(PFLAGS) -DFEAT_GUI auto/if_perl.c | sed "/_VI/d" > proto/$@ 1712 1713 1714notags: 1715 -rm -f tags 1716 1717# Note: tags is made for the currently configured version, can't include both 1718# Motif and Athena GUI 1719# You can ignore error messages for missing files. 1720tags TAGS: notags 1721 $(TAGPRG) $(TAGS_SRC) $(TAGS_INCL) 1722 1723# Make a highlight file for types. Requires Exuberant ctags and awk 1724types: types.vim 1725types.vim: $(TAGS_SRC) $(TAGS_INCL) 1726 ctags --c-kinds=gstu -o- $(TAGS_SRC) $(TAGS_INCL) |\ 1727 awk 'BEGIN{printf("syntax keyword Type\t")}\ 1728 {printf("%s ", $$1)}END{print ""}' > $@ 1729 1730# Execute the test scripts. Run these after compiling Vim, before installing. 1731# This doesn't depend on $(VIMTARGET), because that won't work when configure 1732# wasn't run yet. Restart make to build it instead. 1733# 1734# This will produce a lot of garbage on your screen, including a few error 1735# messages. Don't worry about that. 1736# If there is a real error, there will be a difference between "test.out" and 1737# a "test99.ok" file. 1738# If everything is alright, the final message will be "ALL DONE". 1739# 1740test check: 1741 $(MAKE) -f Makefile $(VIMTARGET) 1742 -if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1743 cd $(PODIR); $(MAKE) -f Makefile check VIM=../$(VIMTARGET); \ 1744 fi 1745 -if test $(VIMTARGET) != vim -a ! -e vim; then \ 1746 ln -s $(VIMTARGET) vim; \ 1747 fi 1748 cd testdir; $(MAKE) -f Makefile $(GUI_TESTTARGET) VIMPROG=../$(VIMTARGET) $(GUI_TESTARG) 1749 1750testclean: 1751 cd testdir; $(MAKE) -f Makefile clean 1752 if test -d $(PODIR); then \ 1753 cd $(PODIR); $(MAKE) checkclean; \ 1754 fi 1755 1756install: $(GUI_INSTALL) 1757 1758install_normal: installvim installtools $(INSTALL_LANGS) install-icons 1759 1760install_gui_extra: installgtutorbin 1761 1762installvim: installvimbin installtutorbin \ 1763 installruntime installlinks installmanlinks 1764 1765# 1766# Avoid overwriting an existing executable, somebody might be running it and 1767# overwriting it could cause it to crash. Deleting it is OK, it won't be 1768# really deleted until all running processes for it have exited. It is 1769# renamed first, in case the deleting doesn't work. 1770# 1771# If you want to keep an older version, rename it before running "make 1772# install". 1773# 1774installvimbin: $(VIMTARGET) $(DESTDIR)$(exec_prefix) $(DEST_BIN) 1775 -if test -f $(DEST_BIN)/$(VIMTARGET); then \ 1776 mv -f $(DEST_BIN)/$(VIMTARGET) $(DEST_BIN)/$(VIMNAME).rm; \ 1777 rm -f $(DEST_BIN)/$(VIMNAME).rm; \ 1778 fi 1779 $(INSTALL_PROG) $(VIMTARGET) $(DEST_BIN) 1780 $(STRIP) $(DEST_BIN)/$(VIMTARGET) 1781 chmod $(BINMOD) $(DEST_BIN)/$(VIMTARGET) 1782# may create a link to the new executable from /usr/bin/vi 1783 -$(LINKIT) 1784 1785# Long list of arguments for the shell script that installs the manual pages 1786# for one language. 1787INSTALLMANARGS = $(VIMLOC) $(SCRIPTLOC) $(VIMRCLOC) $(HELPSOURCE) $(MANMOD) \ 1788 $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) 1789 1790# Install most of the runtime files 1791installruntime: installrtbase installmacros installtutor installspell 1792 1793# install the help files; first adjust the contents for the final location 1794installrtbase: $(HELPSOURCE)/vim.1 $(DEST_VIM) $(DEST_RT) \ 1795 $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) \ 1796 $(DEST_FTP) $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG) \ 1797 $(DEST_TUTOR) $(DEST_SPELL) $(DEST_COMP) 1798 -$(SHELL) ./installman.sh install $(DEST_MAN) "" $(INSTALLMANARGS) 1799 @echo generating help tags 1800# Generate the help tags with ":helptags" to handle all languages. 1801 -@cd $(HELPSOURCE); $(MAKE) VIMEXE=$(DEST_BIN)/$(VIMTARGET) vimtags 1802 cd $(HELPSOURCE); \ 1803 files=`ls *.txt tags`; \ 1804 files="$$files `ls *.??x tags-?? 2>/dev/null || true`"; \ 1805 $(INSTALL_DATA) $$files $(DEST_HELP); \ 1806 cd $(DEST_HELP); \ 1807 chmod $(HELPMOD) $$files 1808 $(INSTALL_DATA) $(HELPSOURCE)/*.pl $(DEST_HELP) 1809 chmod $(SCRIPTMOD) $(DEST_HELP)/*.pl 1810# install the menu files 1811 $(INSTALL_DATA) $(SCRIPTSOURCE)/menu.vim $(SYS_MENU_FILE) 1812 chmod $(VIMSCRIPTMOD) $(SYS_MENU_FILE) 1813 $(INSTALL_DATA) $(SCRIPTSOURCE)/synmenu.vim $(SYS_SYNMENU_FILE) 1814 chmod $(VIMSCRIPTMOD) $(SYS_SYNMENU_FILE) 1815 $(INSTALL_DATA) $(SCRIPTSOURCE)/delmenu.vim $(SYS_DELMENU_FILE) 1816 chmod $(VIMSCRIPTMOD) $(SYS_DELMENU_FILE) 1817# install the evim file 1818 $(INSTALL_DATA) $(SCRIPTSOURCE)/mswin.vim $(MSWIN_FILE) 1819 chmod $(VIMSCRIPTMOD) $(MSWIN_FILE) 1820 $(INSTALL_DATA) $(SCRIPTSOURCE)/evim.vim $(EVIM_FILE) 1821 chmod $(VIMSCRIPTMOD) $(EVIM_FILE) 1822# install the bugreport file 1823 $(INSTALL_DATA) $(SCRIPTSOURCE)/bugreport.vim $(SYS_BUGR_FILE) 1824 chmod $(VIMSCRIPTMOD) $(SYS_BUGR_FILE) 1825# install the example vimrc files 1826 $(INSTALL_DATA) $(SCRIPTSOURCE)/vimrc_example.vim $(DEST_SCRIPT) 1827 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/vimrc_example.vim 1828 $(INSTALL_DATA) $(SCRIPTSOURCE)/gvimrc_example.vim $(DEST_SCRIPT) 1829 chmod $(VIMSCRIPTMOD) $(DEST_SCRIPT)/gvimrc_example.vim 1830# install the file type detection files 1831 $(INSTALL_DATA) $(SCRIPTSOURCE)/filetype.vim $(SYS_FILETYPE_FILE) 1832 chmod $(VIMSCRIPTMOD) $(SYS_FILETYPE_FILE) 1833 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftoff.vim $(SYS_FTOFF_FILE) 1834 chmod $(VIMSCRIPTMOD) $(SYS_FTOFF_FILE) 1835 $(INSTALL_DATA) $(SCRIPTSOURCE)/scripts.vim $(SYS_SCRIPTS_FILE) 1836 chmod $(VIMSCRIPTMOD) $(SYS_SCRIPTS_FILE) 1837 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugin.vim $(SYS_FTPLUGIN_FILE) 1838 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGIN_FILE) 1839 $(INSTALL_DATA) $(SCRIPTSOURCE)/ftplugof.vim $(SYS_FTPLUGOF_FILE) 1840 chmod $(VIMSCRIPTMOD) $(SYS_FTPLUGOF_FILE) 1841 $(INSTALL_DATA) $(SCRIPTSOURCE)/indent.vim $(SYS_INDENT_FILE) 1842 chmod $(VIMSCRIPTMOD) $(SYS_INDENT_FILE) 1843 $(INSTALL_DATA) $(SCRIPTSOURCE)/indoff.vim $(SYS_INDOFF_FILE) 1844 chmod $(VIMSCRIPTMOD) $(SYS_INDOFF_FILE) 1845 $(INSTALL_DATA) $(SCRIPTSOURCE)/optwin.vim $(SYS_OPTWIN_FILE) 1846 chmod $(VIMSCRIPTMOD) $(SYS_OPTWIN_FILE) 1847# install the print resource files 1848 cd $(PRINTSOURCE); $(INSTALL_DATA) *.ps $(DEST_PRINT) 1849 cd $(DEST_PRINT); chmod $(FILEMOD) *.ps 1850# install the colorscheme files 1851 cd $(COLSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COL) 1852 cd $(DEST_COL); chmod $(HELPMOD) *.vim README.txt 1853# install the syntax files 1854 cd $(SYNSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_SYN) 1855 cd $(DEST_SYN); chmod $(HELPMOD) *.vim README.txt 1856# install the indent files 1857 cd $(INDSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_IND) 1858 cd $(DEST_IND); chmod $(HELPMOD) *.vim README.txt 1859# install the standard autoload files 1860 cd $(AUTOSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_AUTO) 1861 cd $(DEST_AUTO); chmod $(HELPMOD) *.vim README.txt 1862 cd $(AUTOSOURCE)/xml; $(INSTALL_DATA) *.vim $(DEST_AUTO)/xml 1863 cd $(DEST_AUTO)/xml; chmod $(HELPMOD) *.vim 1864# install the standard plugin files 1865 cd $(PLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_PLUG) 1866 cd $(DEST_PLUG); chmod $(HELPMOD) *.vim README.txt 1867# install the ftplugin files 1868 cd $(FTPLUGSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_FTP) 1869 cd $(DEST_FTP); chmod $(HELPMOD) *.vim README.txt 1870# install the compiler files 1871 cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP) 1872 cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt 1873 1874installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO) 1875 $(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO) 1876 chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print` 1877 chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print` 1878 chmod $(SCRIPTMOD) $(DEST_MACRO)/less.sh 1879# When using CVS some CVS directories might have been copied. 1880 cvs=`find $(DEST_MACRO) \( -name CVS -o -name AAPDIR \) -print`; \ 1881 if test -n "$$cvs"; then \ 1882 rm -rf $$cvs; \ 1883 fi 1884 1885# install the tutor files 1886installtutorbin: $(DEST_VIM) 1887 $(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor 1888 chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor 1889 1890installgtutorbin: $(DEST_VIM) 1891 $(INSTALL_DATA) gvimtutor $(DEST_BIN)/$(GVIMNAME)tutor 1892 chmod $(SCRIPTMOD) $(DEST_BIN)/$(GVIMNAME)tutor 1893 1894installtutor: $(DEST_RT) $(DEST_TUTOR) 1895 -$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR) 1896 chmod $(HELPMOD) $(DEST_TUTOR)/* 1897 1898# Install the spell files, if they exist. This assumes at least the English 1899# spell file is there. 1900installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL) 1901 if test -f $(SPELLSOURCE)/en.latin1.spl; then \ 1902 $(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(SPELLSOURCE)/*.sug $(SPELLSOURCE)/*.vim $(DEST_SPELL); \ 1903 chmod $(HELPMOD) $(DEST_SPELL)/*.spl $(DEST_SPELL)/*.sug $(DEST_SPELL)/*.vim; \ 1904 fi 1905 1906# install helper program xxd 1907installtools: $(TOOLS) $(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 1908 $(TOOLSSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TOOLS) \ 1909 $(INSTALL_TOOL_LANGS) 1910 if test -f $(DEST_BIN)/xxd$(EXEEXT); then \ 1911 mv -f $(DEST_BIN)/xxd$(EXEEXT) $(DEST_BIN)/xxd.rm; \ 1912 rm -f $(DEST_BIN)/xxd.rm; \ 1913 fi 1914 $(INSTALL_PROG) xxd/xxd$(EXEEXT) $(DEST_BIN) 1915 $(STRIP) $(DEST_BIN)/xxd$(EXEEXT) 1916 chmod $(BINMOD) $(DEST_BIN)/xxd$(EXEEXT) 1917 -$(SHELL) ./installman.sh xxd $(DEST_MAN) "" $(INSTALLMANARGS) 1918 1919# install the runtime tools 1920 $(INSTALL_DATA_R) $(TOOLSSOURCE)/* $(DEST_TOOLS) 1921# When using CVS some CVS directories might have been copied. 1922 cvs=`find $(DEST_TOOLS) \( -name CVS -o -name AAPDIR \) -print`; \ 1923 if test -n "$$cvs"; then \ 1924 rm -rf $$cvs; \ 1925 fi 1926 -chmod $(FILEMOD) $(DEST_TOOLS)/* 1927# replace the path in some tools 1928 perlpath=`./which.sh perl` && sed -e "s+/usr/bin/perl+$$perlpath+" $(TOOLSSOURCE)/efm_perl.pl >$(DEST_TOOLS)/efm_perl.pl 1929 awkpath=`./which.sh nawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1930 awkpath=`./which.sh gawk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; if test -z "$$awkpath"; then \ 1931 awkpath=`./which.sh awk` && sed -e "s+/usr/bin/nawk+$$awkpath+" $(TOOLSSOURCE)/mve.awk >$(DEST_TOOLS)/mve.awk; fi; fi 1932 -chmod $(SCRIPTMOD) `grep -l "^#!" $(DEST_TOOLS)/*` 1933 1934# install the language specific files for tools, if they were unpacked 1935install-tool-languages: 1936 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1937 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 1938 -$(SHELL) ./installman.sh xxd $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 1939 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 1940 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 1941 -$(SHELL) ./installman.sh xxd $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 1942 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 1943 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 1944 -$(SHELL) ./installman.sh xxd $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 1945 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 1946 -$(SHELL) ./installman.sh xxd $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 1947 1948# install the language specific files, if they were unpacked 1949install-languages: languages $(DEST_LANG) $(DEST_KMAP) 1950 -$(SHELL) ./installman.sh install $(DEST_MAN_FR) "-fr" $(INSTALLMANARGS) 1951 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_I) "-fr" $(INSTALLMANARGS) 1952 -$(SHELL) ./installman.sh install $(DEST_MAN_FR_U) "-fr.UTF-8" $(INSTALLMANARGS) 1953 -$(SHELL) ./installman.sh install $(DEST_MAN_IT) "-it" $(INSTALLMANARGS) 1954 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_I) "-it" $(INSTALLMANARGS) 1955 -$(SHELL) ./installman.sh install $(DEST_MAN_IT_U) "-it.UTF-8" $(INSTALLMANARGS) 1956 -$(SHELL) ./installman.sh install $(DEST_MAN_PL) "-pl" $(INSTALLMANARGS) 1957 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_I) "-pl" $(INSTALLMANARGS) 1958 -$(SHELL) ./installman.sh install $(DEST_MAN_PL_U) "-pl.UTF-8" $(INSTALLMANARGS) 1959 -$(SHELL) ./installman.sh install $(DEST_MAN_RU) "-ru" $(INSTALLMANARGS) 1960 -$(SHELL) ./installman.sh install $(DEST_MAN_RU_U) "-ru.UTF-8" $(INSTALLMANARGS) 1961 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1962 $(DEST_MAN_FR) $(INSTALLMLARGS) 1963 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1964 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 1965 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1966 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 1967 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1968 $(DEST_MAN_IT) $(INSTALLMLARGS) 1969 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1970 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 1971 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1972 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 1973 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1974 $(DEST_MAN_PL) $(INSTALLMLARGS) 1975 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1976 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 1977 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1978 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 1979 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1980 $(DEST_MAN_RU) $(INSTALLMLARGS) 1981 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 1982 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 1983 if test -n "$(MAKEMO)" -a -f $(PODIR)/Makefile; then \ 1984 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) LOCALEDIR=$(DEST_LANG) \ 1985 INSTALL_DATA=$(INSTALL_DATA) FILEMOD=$(FILEMOD) install; \ 1986 fi 1987 if test -d $(LANGSOURCE); then \ 1988 $(INSTALL_DATA) $(LANGSOURCE)/README.txt $(LANGSOURCE)/*.vim $(DEST_LANG); \ 1989 chmod $(FILEMOD) $(DEST_LANG)/README.txt $(DEST_LANG)/*.vim; \ 1990 fi 1991 if test -d $(KMAPSOURCE); then \ 1992 $(INSTALL_DATA) $(KMAPSOURCE)/README.txt $(KMAPSOURCE)/*.vim $(DEST_KMAP); \ 1993 chmod $(FILEMOD) $(DEST_KMAP)/README.txt $(DEST_KMAP)/*.vim; \ 1994 fi 1995 1996# install the icons for KDE, if the directory exists and the icon doesn't. 1997ICON48PATH = $(DESTDIR)$(DATADIR)/icons/hicolor/48x48/apps 1998ICON32PATH = $(DESTDIR)$(DATADIR)/icons/locolor/32x32/apps 1999ICON16PATH = $(DESTDIR)$(DATADIR)/icons/locolor/16x16/apps 2000KDEPATH = $(HOME)/.kde/share/icons 2001install-icons: 2002 if test -d $(ICON48PATH) -a -w $(ICON48PATH) \ 2003 -a ! -f $(ICON48PATH)/gvim.png; then \ 2004 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim48x48.png $(ICON48PATH)/gvim.png; \ 2005 fi 2006 if test -d $(ICON32PATH) -a -w $(ICON32PATH) \ 2007 -a ! -f $(ICON32PATH)/gvim.png; then \ 2008 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim32x32.png $(ICON32PATH)/gvim.png; \ 2009 fi 2010 if test -d $(ICON16PATH) -a -w $(ICON16PATH) \ 2011 -a ! -f $(ICON16PATH)/gvim.png; then \ 2012 $(INSTALL_DATA) $(SCRIPTSOURCE)/vim16x16.png $(ICON16PATH)/gvim.png; \ 2013 fi 2014 2015 2016$(HELPSOURCE)/vim.1 $(MACROSOURCE) $(TOOLSSOURCE): 2017 @echo Runtime files not found. 2018 @echo You need to unpack the runtime archive before running "make install". 2019 test -f error 2020 2021$(DESTDIR)$(exec_prefix) $(DEST_BIN) \ 2022 $(DEST_VIM) $(DEST_RT) $(DEST_HELP) \ 2023 $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) $(DEST_FTP) \ 2024 $(DEST_LANG) $(DEST_KMAP) $(DEST_COMP) \ 2025 $(DEST_MACRO) $(DEST_TOOLS) $(DEST_TUTOR) $(DEST_SPELL) \ 2026 $(DEST_AUTO) $(DEST_AUTO)/xml $(DEST_PLUG): 2027 -$(SHELL) ./mkinstalldirs $@ 2028 -chmod $(DIRMOD) $@ 2029 2030# create links from various names to vim. This is only done when the links 2031# (or executables with the same name) don't exist yet. 2032installlinks: $(GUI_TARGETS) \ 2033 $(DEST_BIN)/$(EXTARGET) \ 2034 $(DEST_BIN)/$(VIEWTARGET) \ 2035 $(DEST_BIN)/$(RVIMTARGET) \ 2036 $(DEST_BIN)/$(RVIEWTARGET) \ 2037 $(INSTALLVIMDIFF) 2038 2039installglinks: $(DEST_BIN)/$(GVIMTARGET) \ 2040 $(DEST_BIN)/$(GVIEWTARGET) \ 2041 $(DEST_BIN)/$(RGVIMTARGET) \ 2042 $(DEST_BIN)/$(RGVIEWTARGET) \ 2043 $(DEST_BIN)/$(EVIMTARGET) \ 2044 $(DEST_BIN)/$(EVIEWTARGET) \ 2045 $(INSTALLGVIMDIFF) 2046 2047installvimdiff: $(DEST_BIN)/$(VIMDIFFTARGET) 2048installgvimdiff: $(DEST_BIN)/$(GVIMDIFFTARGET) 2049 2050$(DEST_BIN)/$(EXTARGET): 2051 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EXTARGET) 2052 2053$(DEST_BIN)/$(VIEWTARGET): 2054 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIEWTARGET) 2055 2056$(DEST_BIN)/$(GVIMTARGET): 2057 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMTARGET) 2058 2059$(DEST_BIN)/$(GVIEWTARGET): 2060 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIEWTARGET) 2061 2062$(DEST_BIN)/$(RVIMTARGET): 2063 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIMTARGET) 2064 2065$(DEST_BIN)/$(RVIEWTARGET): 2066 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RVIEWTARGET) 2067 2068$(DEST_BIN)/$(RGVIMTARGET): 2069 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIMTARGET) 2070 2071$(DEST_BIN)/$(RGVIEWTARGET): 2072 cd $(DEST_BIN); ln -s $(VIMTARGET) $(RGVIEWTARGET) 2073 2074$(DEST_BIN)/$(VIMDIFFTARGET): 2075 cd $(DEST_BIN); ln -s $(VIMTARGET) $(VIMDIFFTARGET) 2076 2077$(DEST_BIN)/$(GVIMDIFFTARGET): 2078 cd $(DEST_BIN); ln -s $(VIMTARGET) $(GVIMDIFFTARGET) 2079 2080$(DEST_BIN)/$(EVIMTARGET): 2081 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIMTARGET) 2082 2083$(DEST_BIN)/$(EVIEWTARGET): 2084 cd $(DEST_BIN); ln -s $(VIMTARGET) $(EVIEWTARGET) 2085 2086# Create links for the manual pages with various names to vim. This is only 2087# done when the links (or manpages with the same name) don't exist yet. 2088 2089INSTALLMLARGS = $(VIMNAME) $(VIMDIFFNAME) $(EVIMNAME) \ 2090 $(EXNAME) $(VIEWNAME) $(RVIMNAME) $(RVIEWNAME) \ 2091 $(GVIMNAME) $(GVIEWNAME) $(RGVIMNAME) $(RGVIEWNAME) \ 2092 $(GVIMDIFFNAME) $(EVIEWNAME) 2093 2094installmanlinks: 2095 -$(SHELL) ./installml.sh install "$(GUI_MAN_TARGETS)" \ 2096 $(DEST_MAN) $(INSTALLMLARGS) 2097 2098uninstall: uninstall_runtime 2099 -rm -f $(DEST_BIN)/$(VIMTARGET) 2100 -rm -f $(DEST_BIN)/vimtutor 2101 -rm -f $(DEST_BIN)/gvimtutor 2102 -rm -f $(DEST_BIN)/$(EXTARGET) $(DEST_BIN)/$(VIEWTARGET) 2103 -rm -f $(DEST_BIN)/$(GVIMTARGET) $(DEST_BIN)/$(GVIEWTARGET) 2104 -rm -f $(DEST_BIN)/$(RVIMTARGET) $(DEST_BIN)/$(RVIEWTARGET) 2105 -rm -f $(DEST_BIN)/$(RGVIMTARGET) $(DEST_BIN)/$(RGVIEWTARGET) 2106 -rm -f $(DEST_BIN)/$(VIMDIFFTARGET) $(DEST_BIN)/$(GVIMDIFFTARGET) 2107 -rm -f $(DEST_BIN)/$(EVIMTARGET) $(DEST_BIN)/$(EVIEWTARGET) 2108 -rm -f $(DEST_BIN)/xxd$(EXEEXT) 2109 2110# Note: the "rmdir" will fail if any files were added after "make install" 2111uninstall_runtime: 2112 -$(SHELL) ./installman.sh uninstall $(DEST_MAN) "" $(INSTALLMANARGS) 2113 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR) "" $(INSTALLMANARGS) 2114 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_I) "" $(INSTALLMANARGS) 2115 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_FR_U) "" $(INSTALLMANARGS) 2116 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT) "" $(INSTALLMANARGS) 2117 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_I) "" $(INSTALLMANARGS) 2118 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_IT_U) "" $(INSTALLMANARGS) 2119 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL) "" $(INSTALLMANARGS) 2120 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_I) "" $(INSTALLMANARGS) 2121 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_PL_U) "" $(INSTALLMANARGS) 2122 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU) "" $(INSTALLMANARGS) 2123 -$(SHELL) ./installman.sh uninstall $(DEST_MAN_RU_U) "" $(INSTALLMANARGS) 2124 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2125 $(DEST_MAN) $(INSTALLMLARGS) 2126 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2127 $(DEST_MAN_FR) $(INSTALLMLARGS) 2128 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2129 $(DEST_MAN_FR_I) $(INSTALLMLARGS) 2130 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2131 $(DEST_MAN_FR_U) $(INSTALLMLARGS) 2132 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2133 $(DEST_MAN_IT) $(INSTALLMLARGS) 2134 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2135 $(DEST_MAN_IT_I) $(INSTALLMLARGS) 2136 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2137 $(DEST_MAN_IT_U) $(INSTALLMLARGS) 2138 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2139 $(DEST_MAN_PL) $(INSTALLMLARGS) 2140 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2141 $(DEST_MAN_PL_I) $(INSTALLMLARGS) 2142 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2143 $(DEST_MAN_PL_U) $(INSTALLMLARGS) 2144 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2145 $(DEST_MAN_RU) $(INSTALLMLARGS) 2146 -$(SHELL) ./installml.sh uninstall "$(GUI_MAN_TARGETS)" \ 2147 $(DEST_MAN_RU_U) $(INSTALLMLARGS) 2148 -rm -f $(DEST_MAN)/xxd.1 2149 -rm -f $(DEST_MAN_FR)/xxd.1 $(DEST_MAN_FR_I)/xxd.1 $(DEST_MAN_FR_U)/xxd.1 2150 -rm -f $(DEST_MAN_IT)/xxd.1 $(DEST_MAN_IT_I)/xxd.1 $(DEST_MAN_IT_U)/xxd.1 2151 -rm -f $(DEST_MAN_PL)/xxd.1 $(DEST_MAN_PL_I)/xxd.1 $(DEST_MAN_PL_U)/xxd.1 2152 -rm -f $(DEST_MAN_RU)/xxd.1 $(DEST_MAN_RU_U)/xxd.1 2153 -rm -f $(DEST_HELP)/*.txt $(DEST_HELP)/tags $(DEST_HELP)/*.pl 2154 -rm -f $(DEST_HELP)/*.??x $(DEST_HELP)/tags-?? 2155 -rm -f $(SYS_MENU_FILE) $(SYS_SYNMENU_FILE) $(SYS_DELMENU_FILE) 2156 -rm -f $(SYS_BUGR_FILE) $(EVIM_FILE) $(MSWIN_FILE) 2157 -rm -f $(DEST_SCRIPT)/gvimrc_example.vim $(DEST_SCRIPT)/vimrc_example.vim 2158 -rm -f $(SYS_FILETYPE_FILE) $(SYS_FTOFF_FILE) $(SYS_SCRIPTS_FILE) 2159 -rm -f $(SYS_INDOFF_FILE) $(SYS_INDENT_FILE) 2160 -rm -f $(SYS_FTPLUGOF_FILE) $(SYS_FTPLUGIN_FILE) 2161 -rm -f $(SYS_OPTWIN_FILE) 2162 -rm -f $(DEST_COL)/*.vim $(DEST_COL)/README.txt 2163 -rm -f $(DEST_SYN)/*.vim $(DEST_SYN)/README.txt 2164 -rm -f $(DEST_IND)/*.vim $(DEST_IND)/README.txt 2165 -rm -rf $(DEST_MACRO) 2166 -rm -rf $(DEST_TUTOR) 2167 -rm -rf $(DEST_SPELL) 2168 -rm -rf $(DEST_TOOLS) 2169 -rm -rf $(DEST_LANG) 2170 -rm -rf $(DEST_KMAP) 2171 -rm -rf $(DEST_COMP) 2172 -rm -f $(DEST_PRINT)/*.ps 2173 -rmdir $(DEST_HELP) $(DEST_PRINT) $(DEST_COL) $(DEST_SYN) $(DEST_IND) 2174 -rm -rf $(DEST_FTP)/*.vim $(DEST_FTP)/README.txt 2175 -rm -f $(DEST_AUTO)/*.vim $(DEST_AUTO)/README.txt $(DEST_AUTO)/xml/*.vim 2176 -rm -f $(DEST_PLUG)/*.vim $(DEST_PLUG)/README.txt 2177 -rmdir $(DEST_FTP) $(DEST_AUTO)/xml $(DEST_AUTO) $(DEST_PLUG) $(DEST_RT) 2178# This will fail when other Vim versions are installed, no worries. 2179 -rmdir $(DEST_VIM) 2180 2181# Clean up all the files that have been produced, except configure's. 2182# We support common typing mistakes for Juergen! :-) 2183clean celan: testclean 2184 -rm -f *.o objects/* core $(VIMTARGET).core $(VIMTARGET) vim xxd/*.o 2185 -rm -f $(TOOLS) auto/osdef.h auto/pathdef.c auto/if_perl.c 2186 -rm -f conftest* *~ auto/link.sed 2187 -rm -rf $(APPDIR) 2188 if test -d $(PODIR); then \ 2189 cd $(PODIR); $(MAKE) prefix=$(DESTDIR)$(prefix) clean; \ 2190 fi 2191 2192# Make a shadow directory for compilation on another system or with different 2193# features. 2194SHADOWDIR = shadow 2195 2196shadow: runtime pixmaps 2197 mkdir $(SHADOWDIR) 2198 cd $(SHADOWDIR); ln -s ../*.[ch] ../*.in ../*.sh ../*.xs ../*.xbm ../toolcheck ../proto ../po ../vimtutor ../gvimtutor ../mkinstalldirs . 2199 mkdir $(SHADOWDIR)/auto 2200 cd $(SHADOWDIR)/auto; ln -s ../../auto/configure . 2201 cd $(SHADOWDIR); rm -f auto/link.sed 2202 cp Makefile configure $(SHADOWDIR) 2203 rm -f $(SHADOWDIR)/auto/config.mk $(SHADOWDIR)/config.mk.dist 2204 cp config.mk.dist $(SHADOWDIR)/auto/config.mk 2205 cp config.mk.dist $(SHADOWDIR) 2206 mkdir $(SHADOWDIR)/xxd 2207 cd $(SHADOWDIR)/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . 2208 if test -d $(RSRC_DIR); then \ 2209 cd $(SHADOWDIR); \ 2210 ln -s ../infplist.xml .; \ 2211 ln -s ../$(RSRC_DIR) ../os_mac.rsr.hqx ../dehqx.py .; \ 2212 fi 2213 mkdir $(SHADOWDIR)/testdir 2214 cd $(SHADOWDIR)/testdir; ln -s ../../testdir/Makefile \ 2215 ../../testdir/vimrc.unix \ 2216 ../../testdir/*.in \ 2217 ../../testdir/*.vim \ 2218 ../../testdir/*.ok . 2219 2220# Link needed for doing "make install" in a shadow directory. 2221runtime: 2222 -ln -s ../runtime . 2223 2224# Link needed for doing "make" using GTK in a shadow directory. 2225pixmaps: 2226 -ln -s ../pixmaps . 2227 2228# Update the synmenu.vim file with the latest Syntax menu. 2229# This is only needed when runtime/makemenu.vim was changed. 2230menu: ./vim ../runtime/makemenu.vim 2231 ./vim -u ../runtime/makemenu.vim 2232 2233# Start configure from scratch 2234scrub scratch: 2235 -rm -f auto/config.status auto/config.cache config.log auto/config.log 2236 -rm -f auto/config.h auto/link.log auto/link.sed auto/config.mk 2237 touch auto/config.h 2238 cp config.mk.dist auto/config.mk 2239 2240distclean: clean scratch 2241 -rm -f tags 2242 2243dist: distclean 2244 @echo 2245 @echo Making the distribution has to be done in the top directory 2246 2247mdepend: 2248 -@rm -f Makefile~ 2249 cp Makefile Makefile~ 2250 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2251 @for i in $(ALL_SRC) ; do \ 2252 echo "$$i" ; \ 2253 echo `echo "$$i" | sed -e 's/[^ ]*\.c$$/objects\/\1.o/'`": $$i" `\ 2254 $(CPP) $$i |\ 2255 grep '^# .*"\./.*\.h"' |\ 2256 sort -t'"' -u +1 -2 |\ 2257 sed -e 's/.*"\.\/\(.*\)".*/\1/'\ 2258 ` >> tmp_make ; \ 2259 done 2260 mv tmp_make Makefile 2261 2262depend: 2263 -@rm -f Makefile~ 2264 cp Makefile Makefile~ 2265 sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make 2266 -for i in $(ALL_SRC); do echo $$i; \ 2267 $(CPP_DEPEND) $$i | \ 2268 sed -e 's+^\([^ ]*\.o\)+objects/\1+' >> tmp_make; done 2269 mv tmp_make Makefile 2270 2271# Run lint. Clean up the *.ln files that are sometimes left behind. 2272lint: 2273 lint $(LINT_OPTIONS) $(LINT_CFLAGS) $(LINT_EXTRA) $(LINT_SRC) 2274 -rm -f *.ln 2275 2276# Check dosinst.c with lint. 2277lintinstall: 2278 lint $(LINT_OPTIONS) -DWIN32 -DUNIX_LINT dosinst.c 2279 -rm -f dosinst.ln 2280 2281########################################################################### 2282 2283.c.o: 2284 $(CCC) $< 2285 2286auto/if_perl.c: if_perl.xs 2287 $(PERL) -e 'unless ( $$] >= 5.005 ) { for (qw(na defgv errgv)) { print "#define PL_$$_ $$_\n" }}' > $@ 2288 $(PERL) $(PERLLIB)/ExtUtils/xsubpp -prototypes -typemap \ 2289 $(PERLLIB)/ExtUtils/typemap if_perl.xs >> $@ 2290 2291auto/osdef.h: auto/config.h osdef.sh osdef1.h.in osdef2.h.in 2292 CC="$(CC) $(OSDEF_CFLAGS)" srcdir=$(srcdir) sh $(srcdir)/osdef.sh 2293 2294QUOTESED = sed -e 's/[\\"]/\\&/g' -e 's/\\"/"/' -e 's/\\";$$/";/' 2295auto/pathdef.c: Makefile auto/config.mk 2296 -@echo creating $@ 2297 -@echo '/* pathdef.c */' > $@ 2298 -@echo '/* This file is automatically created by Makefile' >> $@ 2299 -@echo ' * DO NOT EDIT! Change Makefile only. */' >> $@ 2300 -@echo '#include "vim.h"' >> $@ 2301 -@echo 'char_u *default_vim_dir = (char_u *)"$(VIMRCLOC)";' | $(QUOTESED) >> $@ 2302 -@echo 'char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR)";' | $(QUOTESED) >> $@ 2303 -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' | $(QUOTESED) >> $@ 2304 -@echo 'char_u *all_lflags = (char_u *)"$(CC) $(ALL_LIB_DIRS) $(LDFLAGS) -o $(VIMTARGET) $(ALL_LIBS) ";' | $(QUOTESED) >> $@ 2305 -@echo 'char_u *compiled_user = (char_u *)"' | tr -d $(NL) >> $@ 2306 -@if test -n "$(COMPILEDBY)"; then \ 2307 echo "$(COMPILEDBY)" | tr -d $(NL) >> $@; \ 2308 else ((logname) 2>/dev/null || whoami) | tr -d $(NL) >> $@; fi 2309 -@echo '";' >> $@ 2310 -@echo 'char_u *compiled_sys = (char_u *)"' | tr -d $(NL) >> $@ 2311 -@if test -z "$(COMPILEDBY)"; then hostname | tr -d $(NL) >> $@; fi 2312 -@echo '";' >> $@ 2313 -@sh $(srcdir)/pathdef.sh 2314 2315# All the object files are put in the "objects" directory. Since not all make 2316# commands understand putting object files in another directory, it must be 2317# specified for each file separately. 2318 2319objects: 2320 mkdir objects 2321 2322objects/buffer.o: buffer.c 2323 $(CCC) -o $@ buffer.c 2324 2325objects/charset.o: charset.c 2326 $(CCC) -o $@ charset.c 2327 2328objects/diff.o: diff.c 2329 $(CCC) -o $@ diff.c 2330 2331objects/digraph.o: digraph.c 2332 $(CCC) -o $@ digraph.c 2333 2334objects/edit.o: edit.c 2335 $(CCC) -o $@ edit.c 2336 2337objects/eval.o: eval.c 2338 $(CCC) -o $@ eval.c 2339 2340objects/ex_cmds.o: ex_cmds.c 2341 $(CCC) -o $@ ex_cmds.c 2342 2343objects/ex_cmds2.o: ex_cmds2.c 2344 $(CCC) -o $@ ex_cmds2.c 2345 2346objects/ex_docmd.o: ex_docmd.c 2347 $(CCC) -o $@ ex_docmd.c 2348 2349objects/ex_eval.o: ex_eval.c 2350 $(CCC) -o $@ ex_eval.c 2351 2352objects/ex_getln.o: ex_getln.c 2353 $(CCC) -o $@ ex_getln.c 2354 2355objects/fileio.o: fileio.c 2356 $(CCC) -o $@ fileio.c 2357 2358objects/fold.o: fold.c 2359 $(CCC) -o $@ fold.c 2360 2361objects/getchar.o: getchar.c 2362 $(CCC) -o $@ getchar.c 2363 2364objects/hardcopy.o: hardcopy.c 2365 $(CCC) -o $@ hardcopy.c 2366 2367objects/hashtab.o: hashtab.c 2368 $(CCC) -o $@ hashtab.c 2369 2370objects/gui.o: gui.c 2371 $(CCC) -o $@ gui.c 2372 2373objects/gui_at_fs.o: gui_at_fs.c 2374 $(CCC) -o $@ gui_at_fs.c 2375 2376objects/gui_at_sb.o: gui_at_sb.c 2377 $(CCC) -o $@ gui_at_sb.c 2378 2379objects/gui_athena.o: gui_athena.c 2380 $(CCC) -o $@ gui_athena.c 2381 2382objects/gui_beval.o: gui_beval.c 2383 $(CCC) -o $@ gui_beval.c 2384 2385objects/gui_gtk.o: gui_gtk.c 2386 $(CCC) -o $@ gui_gtk.c 2387 2388objects/gui_gtk_f.o: gui_gtk_f.c 2389 $(CCC) -o $@ gui_gtk_f.c 2390 2391objects/gui_gtk_x11.o: gui_gtk_x11.c 2392 $(CCC) -o $@ gui_gtk_x11.c 2393 2394objects/gui_motif.o: gui_motif.c 2395 $(CCC) -o $@ gui_motif.c 2396 2397objects/gui_xmdlg.o: gui_xmdlg.c 2398 $(CCC) -o $@ gui_xmdlg.c 2399 2400objects/gui_xmebw.o: gui_xmebw.c 2401 $(CCC) -o $@ gui_xmebw.c 2402 2403objects/gui_x11.o: gui_x11.c 2404 $(CCC) -o $@ gui_x11.c 2405 2406objects/gui_photon.o: gui_photon.c 2407 $(CCC) -o $@ gui_photon.c 2408 2409objects/gui_mac.o: gui_mac.c 2410 $(CCC) -o $@ gui_mac.c 2411 2412objects/hangulin.o: hangulin.c 2413 $(CCC) -o $@ hangulin.c 2414 2415objects/if_cscope.o: if_cscope.c 2416 $(CCC) -o $@ if_cscope.c 2417 2418objects/if_xcmdsrv.o: if_xcmdsrv.c 2419 $(CCC) -o $@ if_xcmdsrv.c 2420 2421objects/if_mzsch.o: if_mzsch.c 2422 $(CCC) -o $@ if_mzsch.c 2423 2424objects/if_perl.o: auto/if_perl.c 2425 $(CCC) -o $@ auto/if_perl.c 2426 2427objects/if_perlsfio.o: if_perlsfio.c 2428 $(CCC) -o $@ if_perlsfio.c 2429 2430objects/if_python.o: if_python.c 2431 $(CCC) -o $@ if_python.c 2432 2433objects/if_ruby.o: if_ruby.c 2434 $(CCC) -o $@ if_ruby.c 2435 2436objects/if_sniff.o: if_sniff.c 2437 $(CCC) -o $@ if_sniff.c 2438 2439objects/if_tcl.o: if_tcl.c 2440 $(CCC) -o $@ if_tcl.c 2441 2442objects/integration.o: integration.c 2443 $(CCC) -o $@ integration.c 2444 2445objects/main.o: main.c 2446 $(CCC) -o $@ main.c 2447 2448objects/mark.o: mark.c 2449 $(CCC) -o $@ mark.c 2450 2451objects/memfile.o: memfile.c 2452 $(CCC) -o $@ memfile.c 2453 2454objects/memline.o: memline.c 2455 $(CCC) -o $@ memline.c 2456 2457objects/menu.o: menu.c 2458 $(CCC) -o $@ menu.c 2459 2460objects/message.o: message.c 2461 $(CCC) -o $@ message.c 2462 2463objects/misc1.o: misc1.c 2464 $(CCC) -o $@ misc1.c 2465 2466objects/misc2.o: misc2.c 2467 $(CCC) -o $@ misc2.c 2468 2469objects/move.o: move.c 2470 $(CCC) -o $@ move.c 2471 2472objects/mbyte.o: mbyte.c 2473 $(CCC) -o $@ mbyte.c 2474 2475objects/normal.o: normal.c 2476 $(CCC) -o $@ normal.c 2477 2478objects/ops.o: ops.c 2479 $(CCC) -o $@ ops.c 2480 2481objects/option.o: option.c 2482 $(CCC) -o $@ option.c 2483 2484objects/os_beos.o: os_beos.c 2485 $(CCC) -o $@ os_beos.c 2486 2487objects/os_qnx.o: os_qnx.c 2488 $(CCC) -o $@ os_qnx.c 2489 2490objects/os_macosx.o: os_macosx.c 2491 $(CCC) -o $@ os_macosx.c 2492 2493objects/os_mac_conv.o: os_mac_conv.c 2494 $(CCC) -o $@ os_mac_conv.c 2495 2496objects/os_unix.o: os_unix.c 2497 $(CCC) -o $@ os_unix.c 2498 2499objects/pathdef.o: auto/pathdef.c 2500 $(CCC) -o $@ auto/pathdef.c 2501 2502objects/py_config.o: $(PYTHON_CONFDIR)/config.c 2503 $(CCC) -o $@ $(PYTHON_CONFDIR)/config.c \ 2504 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN 2505 2506objects/py_getpath.o: $(PYTHON_CONFDIR)/getpath.c 2507 $(CCC) -o $@ $(PYTHON_CONFDIR)/getpath.c \ 2508 -I$(PYTHON_CONFDIR) -DHAVE_CONFIG_H -DNO_MAIN \ 2509 $(PYTHON_GETPATH_CFLAGS) 2510 2511objects/pty.o: pty.c 2512 $(CCC) -o $@ pty.c 2513 2514objects/popupmnu.o: popupmnu.c 2515 $(CCC) -o $@ popupmnu.c 2516 2517objects/quickfix.o: quickfix.c 2518 $(CCC) -o $@ quickfix.c 2519 2520objects/regexp.o: regexp.c 2521 $(CCC) -o $@ regexp.c 2522 2523objects/screen.o: screen.c 2524 $(CCC) -o $@ screen.c 2525 2526objects/search.o: search.c 2527 $(CCC) -o $@ search.c 2528 2529objects/spell.o: spell.c 2530 $(CCC) -o $@ spell.c 2531 2532objects/syntax.o: syntax.c 2533 $(CCC) -o $@ syntax.c 2534 2535objects/tag.o: tag.c 2536 $(CCC) -o $@ tag.c 2537 2538objects/term.o: term.c 2539 $(CCC) -o $@ term.c 2540 2541objects/ui.o: ui.c 2542 $(CCC) -o $@ ui.c 2543 2544objects/undo.o: undo.c 2545 $(CCC) -o $@ undo.c 2546 2547objects/window.o: window.c 2548 $(CCC) -o $@ window.c 2549 2550objects/workshop.o: workshop.c 2551 $(CCC) -o $@ workshop.c 2552 2553objects/wsdebug.o: wsdebug.c 2554 $(CCC) -o $@ wsdebug.c 2555 2556objects/netbeans.o: netbeans.c 2557 $(CCC) -o $@ netbeans.c 2558 2559Makefile: 2560 @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! 2561 2562############################################################################### 2563### MacOS X installation 2564### 2565### This installs a runnable Vim.app in $(prefix) 2566 2567REZ = /Developer/Tools/Rez 2568RESDIR = $(APPDIR)/Contents/Resources 2569VERSION = $(VIMMAJOR).$(VIMMINOR) 2570 2571### Common flags 2572M4FLAGSX = $(M4FLAGS) -DAPP_EXE=$(VIMNAME) -DAPP_NAME=$(VIMNAME) \ 2573 -DAPP_VER=$(VERSION) 2574 2575install_macosx: gui_bundle 2576# Remove the link to the runtime dir, don't want to copy all of that. 2577 -rm $(RESDIR)/vim/runtime 2578 $(INSTALL_DATA_R) $(APPDIR) $(DESTDIR)$(prefix) 2579# Generate the help tags file now, it won't work with "make installruntime". 2580 -@srcdir=`pwd`; cd $(HELPSOURCE); $(MAKE) VIMEXE=$$srcdir/$(VIMTARGET) vimtags 2581# Install the runtime files. Recursive! 2582 -mkdir -p $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2583# -mkdir $(DESTDIR)$(prefix)/$(APPDIR)/bin 2584 srcdir=`pwd`; $(MAKE) -f Makefile installruntime \ 2585 VIMEXE=$$srcdir/$(VIMTARGET) \ 2586 prefix=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2587 exec_prefix=$(DESTDIR)$(prefix)/$(APPDIR)/Contents \ 2588 BINDIR=$(DESTDIR)$(prefix)/$(APPDIR)/Contents/MacOS \ 2589 VIMLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR) \ 2590 VIMRTLOC=$(DESTDIR)$(prefix)/$(RESDIR)$(VIMDIR)/runtime 2591# Put the link back. 2592 ln -s `pwd`/../runtime $(RESDIR)/vim 2593# Copy rgb.txt, Mac doesn't always have X11 2594 $(INSTALL_DATA) $(SCRIPTSOURCE)/rgb.txt $(DESTDIR)$(prefix)/$(RESDIR)/vim/runtime 2595# TODO: Create the vimtutor and/or gvimtutor application. 2596 2597gui_bundle: $(RESDIR) bundle-dir bundle-executable bundle-info bundle-resource \ 2598 bundle-language 2599 2600$(RESDIR): 2601 mkdir -p $@ 2602 2603bundle-dir: $(APPDIR)/Contents $(VIMTARGET) 2604# Make a link to the runtime directory, so that we can try out the executable 2605# without installing it. 2606 mkdir -p $(RESDIR)/vim 2607 -ln -s `pwd`/../runtime $(RESDIR)/vim 2608 2609bundle-executable: $(VIMTARGET) 2610 mkdir -p $(APPDIR)/Contents/MacOS 2611 cp $(VIMTARGET) $(APPDIR)/Contents/MacOS/$(VIMTARGET) 2612 2613bundle-info: bundle-dir 2614 @echo "Creating PkgInfo" 2615 @echo -n "APPLVIM!" > $(APPDIR)/Contents/PkgInfo 2616 @echo "Creating Info.plist" 2617 m4 $(M4FLAGSX) infplist.xml > $(APPDIR)/Contents/Info.plist 2618 2619bundle-resource: bundle-dir bundle-rsrc 2620 cp -f $(RSRC_DIR)/*.icns $(RESDIR) 2621 2622### Classic resources 2623# Resource fork (in the form of a .rsrc file) for Classic Vim (Mac OS 9) 2624# This file is also required for OS X Vim. 2625bundle-rsrc: os_mac.rsr.hqx 2626 @echo "Creating resource fork" 2627 python dehqx.py $< 2628 rm -f gui_mac.rsrc 2629 mv gui_mac.rsrc.rsrcfork $(RESDIR)/$(VIMNAME).rsrc 2630 2631# po/Make_osx.pl says something about generating a Mac message file 2632# for Ukrananian. Would somebody using Mac OS X in Ukranian 2633# *really* be upset that Carbon Vim was not localised in 2634# Ukranian? 2635# 2636#bundle-language: bundle-dir po/Make_osx.pl 2637# cd po && perl Make_osx.pl --outdir ../$(RESDIR) $(MULTILANG) 2638bundle-language: bundle-dir 2639 2640$(APPDIR)/Contents: 2641 -$(SHELL) ./mkinstalldirs $(APPDIR)/Contents/MacOS 2642 -$(SHELL) ./mkinstalldirs $(RESDIR)/English.lproj 2643 2644 2645############################################################################### 2646### (automatically generated by 'make depend') 2647### Dependencies: 2648objects/buffer.o: buffer.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2649 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2650 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2651 arabic.h version.h 2652objects/charset.o: charset.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2653 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2654 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2655 arabic.h 2656objects/diff.o: diff.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2657 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2658 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2659 arabic.h 2660objects/digraph.o: digraph.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2661 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2662 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2663 arabic.h 2664objects/edit.o: edit.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2665 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2666 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2667 arabic.h 2668objects/eval.o: eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2669 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2670 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2671 arabic.h version.h 2672objects/ex_cmds.o: ex_cmds.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2673 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2674 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2675 arabic.h version.h 2676objects/ex_cmds2.o: ex_cmds2.c vim.h auto/config.h feature.h os_unix.h \ 2677 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2678 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2679 globals.h farsi.h arabic.h version.h 2680objects/ex_docmd.o: ex_docmd.c vim.h auto/config.h feature.h os_unix.h \ 2681 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2682 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2683 globals.h farsi.h arabic.h 2684objects/ex_eval.o: ex_eval.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2685 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2686 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2687 arabic.h 2688objects/ex_getln.o: ex_getln.c vim.h auto/config.h feature.h os_unix.h \ 2689 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2690 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2691 globals.h farsi.h arabic.h 2692objects/fileio.o: fileio.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2693 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2694 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2695 arabic.h 2696objects/fold.o: fold.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2697 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2698 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2699 arabic.h 2700objects/getchar.o: getchar.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2701 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2702 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2703 arabic.h 2704objects/hardcopy.o: hardcopy.c vim.h auto/config.h feature.h os_unix.h \ 2705 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2706 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2707 globals.h farsi.h arabic.h version.h 2708objects/hashtab.o: hashtab.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2709 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2710 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2711 arabic.h 2712objects/if_cscope.o: if_cscope.c vim.h auto/config.h feature.h os_unix.h \ 2713 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2714 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2715 globals.h farsi.h arabic.h if_cscope.h 2716objects/if_xcmdsrv.o: if_xcmdsrv.c vim.h auto/config.h feature.h os_unix.h \ 2717 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2718 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2719 globals.h farsi.h arabic.h version.h 2720objects/main.o: main.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2721 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2722 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2723 arabic.h farsi.c arabic.c 2724objects/mark.o: mark.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2725 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2726 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2727 arabic.h 2728objects/memfile.o: memfile.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2729 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2730 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2731 arabic.h 2732objects/memline.o: memline.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2733 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2734 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2735 arabic.h 2736objects/menu.o: menu.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2737 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2738 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2739 arabic.h 2740objects/message.o: message.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2741 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2742 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2743 arabic.h 2744objects/misc1.o: misc1.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2745 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2746 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2747 arabic.h version.h 2748objects/misc2.o: misc2.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2749 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2750 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2751 arabic.h 2752objects/move.o: move.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2753 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2754 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2755 arabic.h 2756objects/mbyte.o: mbyte.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2757 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2758 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2759 arabic.h 2760objects/normal.o: normal.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2761 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2762 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2763 arabic.h 2764objects/ops.o: ops.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2765 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2766 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2767objects/option.o: option.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2768 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2769 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2770 arabic.h 2771objects/os_unix.o: os_unix.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2772 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2773 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2774 arabic.h os_unixx.h 2775objects/pathdef.o: auto/pathdef.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \ 2776 ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \ 2777 ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \ 2778 ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h 2779objects/popupmnu.o: popupmnu.c vim.h auto/config.h feature.h os_unix.h \ 2780 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2781 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2782 globals.h farsi.h arabic.h 2783objects/quickfix.o: quickfix.c vim.h auto/config.h feature.h os_unix.h \ 2784 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2785 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2786 globals.h farsi.h arabic.h 2787objects/regexp.o: regexp.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2788 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2789 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2790 arabic.h 2791objects/screen.o: screen.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2792 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2793 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2794 arabic.h 2795objects/search.o: search.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2796 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2797 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2798 arabic.h 2799objects/spell.o: spell.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2800 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2801 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2802 arabic.h 2803objects/syntax.o: syntax.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2804 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2805 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2806 arabic.h 2807objects/tag.o: tag.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2808 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2809 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2810objects/term.o: term.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2811 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2812 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2813 arabic.h 2814objects/ui.o: ui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2815 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2816 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2817objects/undo.o: undo.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2818 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2819 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2820 arabic.h 2821objects/version.o: version.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2822 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2823 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2824 arabic.h version.h 2825objects/window.o: window.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2826 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2827 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2828 arabic.h 2829objects/gui.o: gui.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2830 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2831 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2832objects/gui_gtk.o: gui_gtk.c gui_gtk_f.h vim.h auto/config.h feature.h os_unix.h \ 2833 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2834 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2835 globals.h farsi.h arabic.h ../pixmaps/stock_icons.h 2836objects/gui_gtk_f.o: gui_gtk_f.c vim.h auto/config.h feature.h os_unix.h \ 2837 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2838 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2839 globals.h farsi.h arabic.h gui_gtk_f.h 2840objects/gui_motif.o: gui_motif.c vim.h auto/config.h feature.h os_unix.h \ 2841 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2842 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2843 globals.h farsi.h arabic.h gui_xmebw.h ../pixmaps/alert.xpm \ 2844 ../pixmaps/error.xpm ../pixmaps/generic.xpm ../pixmaps/info.xpm \ 2845 ../pixmaps/quest.xpm gui_x11_pm.h ../pixmaps/tb_new.xpm \ 2846 ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm ../pixmaps/tb_save.xpm \ 2847 ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm ../pixmaps/tb_copy.xpm \ 2848 ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2849 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2850 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2851 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2852 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2853 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2854 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2855 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2856 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2857 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2858 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2859 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2860 ../pixmaps/tb_minwidth.xpm 2861objects/gui_xmdlg.o: gui_xmdlg.c vim.h auto/config.h feature.h os_unix.h \ 2862 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2863 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2864 globals.h farsi.h arabic.h 2865objects/gui_xmebw.o: gui_xmebw.c vim.h auto/config.h feature.h os_unix.h \ 2866 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2867 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2868 globals.h farsi.h arabic.h gui_xmebwp.h gui_xmebw.h 2869objects/gui_athena.o: gui_athena.c vim.h auto/config.h feature.h os_unix.h \ 2870 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2871 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2872 globals.h farsi.h arabic.h gui_at_sb.h gui_x11_pm.h \ 2873 ../pixmaps/tb_new.xpm ../pixmaps/tb_open.xpm ../pixmaps/tb_close.xpm \ 2874 ../pixmaps/tb_save.xpm ../pixmaps/tb_print.xpm ../pixmaps/tb_cut.xpm \ 2875 ../pixmaps/tb_copy.xpm ../pixmaps/tb_paste.xpm ../pixmaps/tb_find.xpm \ 2876 ../pixmaps/tb_find_next.xpm ../pixmaps/tb_find_prev.xpm \ 2877 ../pixmaps/tb_find_help.xpm ../pixmaps/tb_exit.xpm \ 2878 ../pixmaps/tb_undo.xpm ../pixmaps/tb_redo.xpm ../pixmaps/tb_help.xpm \ 2879 ../pixmaps/tb_macro.xpm ../pixmaps/tb_make.xpm \ 2880 ../pixmaps/tb_save_all.xpm ../pixmaps/tb_jump.xpm \ 2881 ../pixmaps/tb_ctags.xpm ../pixmaps/tb_load_session.xpm \ 2882 ../pixmaps/tb_save_session.xpm ../pixmaps/tb_new_session.xpm \ 2883 ../pixmaps/tb_blank.xpm ../pixmaps/tb_maximize.xpm \ 2884 ../pixmaps/tb_split.xpm ../pixmaps/tb_minimize.xpm \ 2885 ../pixmaps/tb_shell.xpm ../pixmaps/tb_replace.xpm \ 2886 ../pixmaps/tb_vsplit.xpm ../pixmaps/tb_maxwidth.xpm \ 2887 ../pixmaps/tb_minwidth.xpm 2888objects/gui_gtk_x11.o: gui_gtk_x11.c vim.h auto/config.h feature.h os_unix.h \ 2889 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2890 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2891 globals.h farsi.h arabic.h gui_gtk_f.h ../runtime/vim32x32.xpm \ 2892 ../runtime/vim16x16.xpm ../runtime/vim48x48.xpm 2893objects/gui_x11.o: gui_x11.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2894 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2895 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2896 arabic.h ../runtime/vim32x32.xpm ../runtime/vim16x16.xpm \ 2897 ../runtime/vim48x48.xpm 2898objects/gui_at_sb.o: gui_at_sb.c vim.h auto/config.h feature.h os_unix.h \ 2899 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2900 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2901 globals.h farsi.h arabic.h gui_at_sb.h 2902objects/gui_at_fs.o: gui_at_fs.c vim.h auto/config.h feature.h os_unix.h \ 2903 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2904 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2905 globals.h farsi.h arabic.h gui_at_sb.h 2906objects/pty.o: pty.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h ascii.h \ 2907 keymap.h term.h macros.h option.h structs.h regexp.h gui.h gui_beval.h \ 2908 proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h arabic.h 2909objects/hangulin.o: hangulin.c vim.h auto/config.h feature.h os_unix.h \ 2910 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2911 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2912 globals.h farsi.h arabic.h 2913objects/if_mzsch.o: if_mzsch.c vim.h auto/config.h feature.h os_unix.h \ 2914 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2915 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2916 globals.h farsi.h arabic.h if_mzsch.h 2917objects/if_perl.o: auto/if_perl.c ./vim.h ./auto/config.h ./feature.h ./os_unix.h \ 2918 ./auto/osdef.h ./ascii.h ./keymap.h ./term.h ./macros.h ./option.h \ 2919 ./structs.h ./regexp.h ./gui.h ./gui_beval.h proto/gui_beval.pro \ 2920 ./ex_cmds.h ./proto.h ./globals.h ./farsi.h ./arabic.h 2921objects/if_perlsfio.o: if_perlsfio.c vim.h auto/config.h feature.h os_unix.h \ 2922 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2923 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2924 globals.h farsi.h arabic.h 2925objects/if_python.o: if_python.c vim.h auto/config.h feature.h os_unix.h \ 2926 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2927 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2928 globals.h farsi.h arabic.h 2929objects/if_tcl.o: if_tcl.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2930 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2931 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2932 arabic.h 2933objects/if_ruby.o: if_ruby.c vim.h auto/config.h feature.h os_unix.h auto/osdef.h \ 2934 ascii.h keymap.h term.h macros.h option.h structs.h regexp.h gui.h \ 2935 gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h globals.h farsi.h \ 2936 arabic.h version.h 2937objects/if_sniff.o: if_sniff.c vim.h auto/config.h feature.h os_unix.h \ 2938 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2939 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2940 globals.h farsi.h arabic.h os_unixx.h 2941objects/gui_beval.o: gui_beval.c vim.h auto/config.h feature.h os_unix.h \ 2942 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2943 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2944 globals.h farsi.h arabic.h 2945objects/workshop.o: workshop.c auto/config.h integration.h vim.h feature.h \ 2946 os_unix.h auto/osdef.h ascii.h keymap.h term.h macros.h option.h \ 2947 structs.h regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h \ 2948 proto.h globals.h farsi.h arabic.h version.h workshop.h 2949objects/wsdebug.o: wsdebug.c 2950objects/integration.o: integration.c vim.h auto/config.h feature.h os_unix.h \ 2951 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2952 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2953 globals.h farsi.h arabic.h integration.h 2954objects/netbeans.o: netbeans.c vim.h auto/config.h feature.h os_unix.h \ 2955 auto/osdef.h ascii.h keymap.h term.h macros.h option.h structs.h \ 2956 regexp.h gui.h gui_beval.h proto/gui_beval.pro ex_cmds.h proto.h \ 2957 globals.h farsi.h arabic.h version.h 2958
